diff options
| -rw-r--r-- | Makefile.am | 25 | ||||
| -rw-r--r-- | configure.ac | 3 | ||||
| -rw-r--r-- | x11pcomp.cpp | 103 | ||||
| -rw-r--r-- | x11perfcomp.in | 103 |
4 files changed, 119 insertions, 115 deletions
diff --git a/Makefile.am b/Makefile.am index 3b6d13b..60839b3 100644 --- a/Makefile.am +++ b/Makefile.am @@ -20,14 +20,8 @@ # PERFORMANCE OF THIS SOFTWARE. SUBDIRS = man -bin_PROGRAMS = x11perf - -bin_SCRIPTS = x11perfcomp - -LIBPATH = $(libdir)/X11/x11perfcomp -x11perfcompdir = $(LIBPATH) -dist_x11perfcomp_SCRIPTS = fillblnk perfboth perfratio Xmark +bin_PROGRAMS = x11perf AM_CFLAGS = $(CWARNFLAGS) $(XEXT_CFLAGS) $(XFT_CFLAGS) $(XRENDER_CFLAGS) $(X11PERF_CFLAGS) x11perf_LDADD = $(XEXT_LIBS) $(XFT_LIBS) $(XRENDER_LIBS) $(X11PERF_LIBS) -lm @@ -53,12 +47,19 @@ x11perf_SOURCES = \ x11perf.c \ x11perf.h -x11perfcomp: x11pcomp.cpp - $(AM_V_GEN)$(SED) s/LIBPATH/`echo $(LIBPATH) | sed -e s/\\\\//\\\\\\\\\\\\\//g`/ < $(srcdir)/x11pcomp.cpp | \ - $(SED) s/XCOMM/\#/ > $@ +bin_SCRIPTS = x11perfcomp +CLEANFILES = $(bin_SCRIPTS) +EXTRA_DIST = $(bin_SCRIPTS:=.in) +DIR_SUBSTS = -e 's|@x11perfcompdir[@]|$(x11perfcompdir)|g' + +x11perfcomp: x11perfcomp.in + $(AM_V_GEN)$(SED) $(DIR_SUBSTS) < $< > $@ -CLEANFILES = $(bin_SCRIPTS) x11perfcomp -EXTRA_DIST = x11pcomp.cpp +dist_x11perfcomp_SCRIPTS = \ + fillblnk \ + perfboth \ + perfratio \ + Xmark MAINTAINERCLEANFILES = ChangeLog INSTALL diff --git a/configure.ac b/configure.ac index 96126f2..d23c209 100644 --- a/configure.ac +++ b/configure.ac @@ -41,6 +41,9 @@ XORG_DEFAULT_OPTIONS AC_TYPE_SIGNAL +# Define the installation directory for the x11 performance compare scripts +AC_SUBST([x11perfcompdir], [$libdir/X11/x11perfcomp]) + # Checks for pkg-config packages PKG_CHECK_MODULES(X11PERF, x11 xmuu) diff --git a/x11pcomp.cpp b/x11pcomp.cpp deleted file mode 100644 index be7d397..0000000 --- a/x11pcomp.cpp +++ /dev/null @@ -1,103 +0,0 @@ -XCOMM! /bin/sh -XCOMM -XCOMM $XFree86$ -XCOMM -XCOMM Collects multiple outputs of x11perf. Just feed it a list of files, each -XCOMM containing the output from an x11perf run, and this shell will extract the -XCOMM object/second information and show it in tabular form. An 80-column line -XCOMM is big enough to compare 4 different servers. -XCOMM -XCOMM This script normally uses the results from $1 to extract the test label -XCOMM descriptions, so you can run x11perf on a subset of the test and then -XCOMM compare the results. But note that x11perffill requires the labels file -XCOMM to be a superset of the x11perf results file. If you run into an ugly -XCOMM situation in which none of the servers completes the desired tests -XCOMM (quite possible on non-DEC servers :), you can use -l <filename> as $1 and -XCOMM $2 to force x11perfcomp to use the labels stored in file $2. (You can run -XCOMM x11perf with the -labels option to generate such a file.) -XCOMM -XCOMM Mark Moraes, University of Toronto <moraes@csri.toronto.edu> -XCOMM Joel McCormack, DEC Western Research Lab <joel@decwrl.dec.com> -XCOMM - -PATH=LIBPATH:.:$PATH -export PATH - -set -e -tmp=${TMPDIR-/tmp}/rates.$$ -trap "rm -rf $tmp" 0 1 2 15 -mkdir $tmp || exit 1 -mkdir $tmp/rates -ratio= -allfiles= -XCOMM Include relative rates in output? Report only relative rates? -case $1 in --r|-a) - ratio=1 - shift; - ;; --ro) - ratio=2 - shift; - ;; -esac -XCOMM Get either the provided label file, or construct one from all the -XCOMM files given. -case $1 in --l) cp $2 $tmp/labels - shift; shift - ;; -*) for file in "$@"; do - awk '$2 == "reps" || $2 == "trep" { print $0; next; }' $file | - sed 's/^.*: //' | - sed 's/ /_/g' | - awk 'NR > 1 { printf ("%s %s\n", prev, $0); } \ - { prev = $0; }' - done | tsort 2>/dev/null | sed 's/_/ /g' > $tmp/labels - ;; -esac -XCOMM Go through all files, and create a corresponding rate file for each -n=1 -for i -do -XCOMM Get lines with average numbers, fill in any tests that may be missing -XCOMM then extract the rate field - base=`basename $i` - (echo " $n " - echo '--------' - awk '$2 == "reps" || $2 == "trep" { \ - line = $0; \ - next; \ - } \ - NF == 0 && line != "" { \ - print line; \ - line=""; \ - next; \ - } \ - ' $i > $tmp/$n.avg - fillblnk $tmp/$n.avg $tmp/labels | - sed 's/( *\([0-9]*\)/(\1/' | - awk '$2 == "reps" || $2 == "trep" { \ - n = substr($6,2,length($6)-7); \ - printf "%8s\n", n; \ - }' - ) > $tmp/rates/$n - echo "$n: $i" - allfiles="$allfiles$tmp/rates/$n " - n=`expr $n + 1` -done -case x$ratio in -x) - ratio=/bin/cat - ;; -x1) - ratio="perfboth $n" - ;; -*) - ratio="perfratio $n" - ;; -esac -echo '' -(echo Operation; echo '---------'; cat $tmp/labels) | -paste $allfiles - | sed 's/ / /g' | $ratio -rm -rf $tmp diff --git a/x11perfcomp.in b/x11perfcomp.in new file mode 100644 index 0000000..50af117 --- /dev/null +++ b/x11perfcomp.in @@ -0,0 +1,103 @@ +#! /bin/sh +# +# $XFree86$ +# +# Collects multiple outputs of x11perf. Just feed it a list of files, each +# containing the output from an x11perf run, and this shell will extract the +# object/second information and show it in tabular form. An 80-column line +# is big enough to compare 4 different servers. +# +# This script normally uses the results from $1 to extract the test label +# descriptions, so you can run x11perf on a subset of the test and then +# compare the results. But note that x11perffill requires the labels file +# to be a superset of the x11perf results file. If you run into an ugly +# situation in which none of the servers completes the desired tests +# (quite possible on non-DEC servers :), you can use -l <filename> as $1 and +# $2 to force x11perfcomp to use the labels stored in file $2. (You can run +# x11perf with the -labels option to generate such a file.) +# +# Mark Moraes, University of Toronto <moraes@csri.toronto.edu> +# Joel McCormack, DEC Western Research Lab <joel@decwrl.dec.com> +# + +PATH=@x11perfcompdir@:.:$PATH +export PATH + +set -e +tmp=${TMPDIR-/tmp}/rates.$$ +trap "rm -rf $tmp" 0 1 2 15 +mkdir $tmp || exit 1 +mkdir $tmp/rates +ratio= +allfiles= +# Include relative rates in output? Report only relative rates? +case $1 in +-r|-a) + ratio=1 + shift; + ;; +-ro) + ratio=2 + shift; + ;; +esac +# Get either the provided label file, or construct one from all the +# files given. +case $1 in +-l) cp $2 $tmp/labels + shift; shift + ;; +*) for file in "$@"; do + awk '$2 == "reps" || $2 == "trep" { print $0; next; }' $file | + sed 's/^.*: //' | + sed 's/ /_/g' | + awk 'NR > 1 { printf ("%s %s\n", prev, $0); } \ + { prev = $0; }' + done | tsort 2>/dev/null | sed 's/_/ /g' > $tmp/labels + ;; +esac +# Go through all files, and create a corresponding rate file for each +n=1 +for i +do +# Get lines with average numbers, fill in any tests that may be missing +# then extract the rate field + base=`basename $i` + (echo " $n " + echo '--------' + awk '$2 == "reps" || $2 == "trep" { \ + line = $0; \ + next; \ + } \ + NF == 0 && line != "" { \ + print line; \ + line=""; \ + next; \ + } \ + ' $i > $tmp/$n.avg + fillblnk $tmp/$n.avg $tmp/labels | + sed 's/( *\([0-9]*\)/(\1/' | + awk '$2 == "reps" || $2 == "trep" { \ + n = substr($6,2,length($6)-7); \ + printf "%8s\n", n; \ + }' + ) > $tmp/rates/$n + echo "$n: $i" + allfiles="$allfiles$tmp/rates/$n " + n=`expr $n + 1` +done +case x$ratio in +x) + ratio=/bin/cat + ;; +x1) + ratio="perfboth $n" + ;; +*) + ratio="perfratio $n" + ;; +esac +echo '' +(echo Operation; echo '---------'; cat $tmp/labels) | +paste $allfiles - | sed 's/ / /g' | $ratio +rm -rf $tmp |