.\" $XConsortium: xedit.man,v 1.23 94/04/17 20:43:39 matt Exp $ .\" Copyright (c) 1994 X Consortium .\" .\" Permission is hereby granted, free of charge, to any person obtaining .\" a copy of this software and associated documentation files (the .\" "Software"), to deal in the Software without restriction, including .\" without limitation the rights to use, copy, modify, merge, publish, .\" distribute, sublicense, and/or sell copies of the Software, and to .\" permit persons to whom the Software is furnished to do so, subject to .\" the following conditions: .\" .\" The above copyright notice and this permission notice shall be included .\" in all copies or substantial portions of the Software. .\" .\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS .\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF .\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. .\" IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR .\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, .\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR .\" OTHER DEALINGS IN THE SOFTWARE. .\" .\" Except as contained in this notice, the name of the X Consortium shall .\" not be used in advertising or otherwise to promote the sale, use or .\" other dealings in this Software without prior written authorization .\" from the X Consortium. .\" .\" $XFree86: xc/programs/xedit/xedit.man,v 1.19 2003/05/29 21:48:11 herrb Exp $ .\" .TH XEDIT 1 __vendorversion__ .SH NAME xedit \- simple text editor for X .SH SYNTAX .B xedit [ .I \-toolkitoption \&.\|.\|. ] [ .I filename \&.\|.\|. ] .SH DESCRIPTION .I Xedit provides a window consisting of the following four areas: .IP "Commands Section" 25 A set of commands that allow you to exit \fIxedit\fP, save the file, or load a new file into the edit window. .IP "Message Window" 25 Displays \fIxedit\fP messages. In addition, this window can be also used as a scratch pad. .IP "Filename Display" Displays the name of the file currently being edited, and whether this file is \fIRead-Write\fP or \fIRead Only\fP. .IP "Edit Window" 25 Displays the text of the file that you are editing or creating. .SH OPTIONS .I Xedit accepts all of the standard X Toolkit command line options (see .IR X (__miscmansuffix__)). The order of the command line options is not important. .TP 8 .I filename Specifies the file(s) that are to be loaded during start-up. This is the file which will be edited. If a file is not specified, .I xedit lets you load files or create new files after it has started up. .SH EDITING The Athena Text widget is used for the three sections of this application that allow text input. The characters typed will go to the Text widget that has the input focus, or the Text widget that the pointer cursor is currently over. .PP The following keystroke combinations are defined: .sp .nf .ta 1.0i 3.0i 4.5i Ctrl-a Beginning Of Line Meta-b Backward Word Ctrl-b Backward Character Meta-f Forward Word Ctrl-d Delete Next Character Meta-i Insert File Ctrl-e End Of Line Meta-k Kill To End Of Paragraph Ctrl-f Forward Character Meta-q Form Paragraph Ctrl-g Keyboard Reset Meta-v Previous Page Ctrl-h Delete Previous Character Meta-y Insert Current Selection Ctrl-j Newline And Indent Meta-z Scroll One Line Down Ctrl-k Kill To End Of Line Meta-d Delete Next Word Ctrl-l Redraw Display Meta-D Kill Word Ctrl-m Newline Meta-h Delete Previous Word Ctrl-n Next Line Meta-H Backward Kill Word Ctrl-o Newline And Backup Meta-< Beginning Of File Ctrl-p Previous Line Meta-> End Of File Ctrl-r Search/Replace Backward Meta-] Forward Paragraph Ctrl-s Search/Replace Forward Meta-[ Backward Paragraph Ctrl-t Transpose Characters Ctrl-u [\fInumber\fP] Multiply by 4 or \fInumber\fP Meta-Delete Delete Previous Word Ctrl-v Next Page Meta-Shift Delete Kill Previous Word Ctrl-w Kill Selection Meta-Backspace Delete Previous Word Ctrl-y Unkill Meta-Shift Backspace Kill Previous Word Ctrl-z Scroll One Line Up Meta-z Scroll One Line Down Ctrl-_ Undo Escape Line Edit Mode .sp In addition, the pointer may be used to cut and paste text: .ta .5i 2.0i Button 1 Down Start Selection Button 1 Motion Adjust Selection Button 1 Up End Selection (cut) Button 2 Down Insert Current Selection (paste) Button 3 Down Extend Current Selection Button 3 Motion Adjust Selection Button 3 Up End Selection (cut) .fi .sp .SH LINE EDIT MODE .I Line edit mode enables several shortcut commands for searching and replacing text in a xedit buffer. .I Line edit mode commands have the format: .br .nf [\fIline-number\fP[,\fIline-number\fP]]\fIcommand\fP[\fIparameters\fP] .fi .I Line number may be specified as: .TP 8 \&. The current text line. .TP 8 $ The last line of the file. .TP 8 number The literal line \fInumber\fP. .TP 8 - or ^ The previous line. Equivalent to \fI-1\fP. .TP 8 -number or ^number The current line minus \fInumber\fP. .TP 8 + The next line. Equivalent to \fI+1\fP. .TP 8 +number The current line plus \fInumber\fP. .TP 8 , or % From the first to the last line. Equivalent to \fI1,$\fP. .TP 8 ; From the current to the last line. Equivalent to \fI.,$\fP. .PP .I Command may be specified as: .TP 8 s Substitute text in the specified lines. .TP 8 /re/ Search forward for the regular expression pattern \fIre\fP. .TP 8 ?re? Search backward for the regular expression pattern \fIre\fP. .PP .I Parameters may be specified as: .TP 8 /re/ Works as a parameter to \fIi\fP or as a command. .TP 8 /re/text/ Search forward for \fIre\fP and substitute by \fItext\fP. .PP .I Options may follow or be parameters, known values are: .TP 8 i Case insensitive search. .TP 8 g \fIGlobal\fP match when replacing text. Unless specified, only the nth, that defaults to 1, match will be replaced. .TP 8 c \fIConfirm\fP before replacing text. .TP 8 number Replace only the occurrence referenced by \fInumber\fP. .PP Commands accept some variations, examples: .br .nf /pattern/i i/pattern/ i/pattern .fi Search forward for \fIpattern\fP. .br .nf ,sc/pattern/text ,sc/pattern/text/ ,s/pattern/text/c .fi Search the entire buffer and ask confirmation to replace \fIpattern\fP with \fItext\fP. .br .nf ,s/pattern/text/number .fi Replace the match \fInumber\fP in the text line. If not specified, defaults to the first occurrence. .PP When searching for text, type to go to the next match. When interactively replacing text, type \fIy\fP or \fIY\fP to accept the change, and \fIn\fP or \fIN\fP to ignore it and go to the next match. .SH COMMANDS .IP Quit 8 Quits the current editing session. If any changes have not been saved, .I xedit displays a warning message, allowing the user to save them. .IP Save If file backups are enabled (see RESOURCES, below) .I xedit stores a copy of the original, unedited file in \fIfile\fP, then overwrites the \fIfile\fP with the contents of the edit window. The filename is retrieved from the Text widget directly to the right of the \fILoad\fP button. .IP Load Loads the file named in the text widget immediately to the right of the this button and displays it in the Edit window. .SH RESOURCES For \fIxedit\fP the available resources are: .TP 8 .B enableBackups (\fPClass\fB EnableBackups) Specifies that, when edits made to an existing file are saved, .I xedit is to copy the original version of that file to \fIfile\fP before it saves the changes. The default value for this resource is ``on,'' stating that backups should be created. .TP 8 .B backupNamePrefix (\fPClass\fB BackupNamePrefix) Specifies a string that is to be prepended to the backup filename. The default is that no string shall be prepended. .TP 8 .B backupNameSuffix (\fPClass\fB BackupNameSuffix) Specifies a string that is to be appended to the backup filename. The default is to use ``~'' as the suffix. .TP 8 .B positionFormat (\fPClass\fB Format) Specifies a format string used to display the cursor position. This string uses printf(3) like notation, where .B %l prints the line number, .B %c prints the column number, .B %p prints the insert position offset, and .B %s prints the current file size. It is also allowed to specify field sizes, with the notation .B %\-?[0\-9]+ \&. The default format string is ``L%l'', which shows the character ``L'' followed by the line number. .TP 8 .B hints (\fPClass\fB Hints) Specifies a list of strings, separated by new lines, that will be displayed in the bc_label window. .TP 8 .B hintsInterval (\fPClass \fBInterval) Specifies the interval in seconds, which the hint string in the bc_label window will be changed. .TP 8 .B changedBitmap (\fPClass \fBBitmap) Specifies the name of the Bitmap that will be displayed in the fileMenu, when the file being edited is changed. .TP 8 .B autoReplace (\fPClass \fBReplace) This resource is useful to automatically correct common misspelling errors, but can also be used to create simple macros. The format is \fI{non-blanks}{blanks}[{string}]\fP. Fields are separeted by newlines. Example of use: \" .br .nf nto not\\n\\ /macro some long string with \\\\\\n newlines \\\\\\n .fi \" .br Will automatically replace the word \fInto\fP by \fInot\fP, and \fI/macro\fP by \fIsome long string with newlines \fP when you type that words. .TP 8 .B ispell.dictionaries (\fPClass \fBispell.Dictionary) Specifies a list of dictionary names, separeted by spaces, available to the ispell program. The default value is \fI"american americamed+ english"\fP. .TP 8 .B ispell.dictionary (\fPClass \fBispell.Dictionary) Specifies the default dictionary to use. .TP 8 .B ispell*.wordChars (\fPClass \fBispell*Chars) Specifies a set of characters that can be part of a legal word. The \fI\fP field is one of the dictionaries specified in the \fIdictionaries\fP resource. .TP 8 .B ispell.ispellCommand (\fPClass \fBispell.CommandLine) The path to the ispell program, and possibly, additional arguments. You don't need to specify the ``-w'' option, neither the ``-a'' option. Refer to the \fIispell\fP(1) manpage for more information on ispell options. .TP 8 .B ispell.formatting (\fPClass \fPispell.TextFormat) Specifies which text formatting to use while spell checking the file. The available formats are \fItext\fP and \fIhtml\fP. .TP 8 .B ispell*text.skipLines (\fPClass \fBispell*text.Skip) Lines starting with one of the characters in this string will not be spell checked. This resource is only used in \fItext\fP mode. .TP 8 .B ispell.terseMode (\fPClass \fBispell.Terse) When enabled, runs ispell in terse mode, not asking user interaction for words generated through compound formation (when using the ispell ``-C'' option), or words generated through affix removal. The default value is False. .TP 8 .B ispell.lookCommand (\fPClass \fBispell.CommandLine) The path to the program to search for alternate words, and possibly, additional arguments. The default program used is \fI/usr/bin/egrep\fP. .TP 8 .B ispell.wordsFile (\fPClass \fBispell.Words) The path to the file[s] to search for alternate words. The default file is \fI/usr/share/dict/words\fP. .TP 8 .B ispell.guessLabel (\fPClass \fBispell.Status) String displayed in the ispell status bar when ispell returns a guess list of one or more words. The default value is \fIGuess\fP. .TP 8 .B ispell.missLabel (\fPClass \fBispell.Status) String displayed in the ispell status bar when ispell returns a list of one or more words to match a misspelled one. The default value is \fIMiss\fP. .TP 8 .B ispell.rootLabel (\fPClass \fBispell.Status) String displayed in the ispell status bar when the word is not in the dictionary, but it can be formed through a root one. The default value is \fIRoot:\fP, and is followed by a space and the root word. .TP 8 .B ispell.noneLabel (\fPClass \fBispell.Status) String displayed in the ispell status bar when there is no near misses. The default value is \fINone\fP. .TP 8 .B ispell.compoundLabel (\fPClass \fBispell.Status) String displayed in the ispell status bar when the word being checked is formed by concatenation of two words. The default value is \fICompound\fP. .TP 8 .B ispell.okLabel (\fPClass \fBispell.Status) String displayed in the ispell status bar when the checked word is in the dictionary. This string is only displayed when using the \fIcheck\fP button in the xedit ispell interface. The default value is \fIOk\fP. .TP 8 .B ispell.eofLabel (\fPClass \fBispell.Status) The string displayed in the ispell status bar when the end of the file is reached. The default value is \fIEnd Of File\fP. .TP 8 .B ispell.repeatLabel (\fPClass \fBispell.Status) The string displayed in the ispell status bar when two identical words are found together in the file. The default value is \fIRepeat\fP. .TP 8 .B ispell.lookLabel (\fPClass \fBispell.Status) The string displayed in the ispell status bar after displaying the results of the \fILook\fP command. If no results are found, the value of the \fIispell.noneLabel\fP resource is shown. .TP 8 .B ispell.workingLabel (\fPClass \fBispell.Status) The string displayed in the ispell status bar while xedit is communicating with ispell. The default value is \fI...\fP. .SH WIDGETS In order to specify resources, it is useful to know the hierarchy of the widgets which compose \fIxedit\fR. In the notation below, indentation indicates hierarchical structure. The widget class name is given first, followed by the widget instance name. .sp .nf .ta .5i 1.0i 1.5i 2.0i Xedit xedit Paned paned Paned buttons Command quit Command save Command load Text filename Label bc_label Text messageWindow Label labelWindow Text editWindow .fi .sp .SH ENVIRONMENT .PP .TP 20 .I DISPLAY to get the default host and display number. .TP 20 .I XENVIRONMENT to get the name of a resource file that overrides the global resources stored in the RESOURCE_MANAGER property. .SH FILES .TP 20 .I __apploaddir__/Xedit specifies required resources .SH "SEE ALSO" .IR X (__miscmansuffix__), .IR xrdb (1), .I "Athena Widget Set" .SH RESTRICTIONS Xedit is not a replacement to Emacs. .SH COPYRIGHT Copyright 1988, Digital Equipment Corporation. .br Copyright 1989, X Consortium .br Copyright 1998, The XFree86 Project .br See .IR X (__miscmansuffix__) for a full statement of rights and permissions. .SH AUTHORS Chris D. Peterson, MIT X Consortium .br Paulo Cesar Pereira de Andrade, The XFree86 Project