| Age | Commit message (Collapse) | Author |
|---|
|
Use input_lock/input_unlock calls instead of SIGIO functions
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This is mostly to eliminate a compiler warning.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This broke in d24431a1863c49aa Restore wheel emulation for absolute devices,
last hunk when the valuator update was moved to before any early exit
condition. But that new update only applies to valuator maps < 2, i.e. x/y
only. Other valuators are now ignored and remain on 0 forever.
Restore the valuator update.
https://bugs.freedesktop.org/show_bug.cgi?id=95315
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
We go up to BTN_JOYSTICK, hence group can have a value of up to including 15.
The actual btn_labels only has 6 elements though.
Found by coverity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The idea was that of a direction lock: as we move vertically we should not
build up any horizontal scroll motion even if we move slightly diagonally.
The effect was though that the axis would be reset completely as soon as an
event from the other axis occured. With the default threshold of 10, if one in
ten events was a REL_X, we'd never get a wheel event.
Drop this code, it's not needed. By default wheel emulation doesn't do
horizontal scrolling, if a config snippet sets XAxisMapping the user wants
horizontal scrolling. And since we just add the value anyway, as long as the
user does a roughly vertical motion we won't get over the threshold anyway.
https://bugs.freedesktop.org/show_bug.cgi?id=93617
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Wheel emulation relies on oldVals, which stopped updating in 3dcf6f123c5.
Since wheel emulation may filter the abs event, store the event before we do
anything with it. If we really want the abs_event, abs_queued will be set to
1, otherwise the value will be ignored.
And now that we know abs_value is always valied, we can copy its value into
old_vals, so that wheel emulation can calculate the delta correctly.
https://bugs.freedesktop.org/show_bug.cgi?id=93617
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
First, it's not actually inertia, it's simply the scroll distance, yay for the
misnomer.
And it needs to be set for any device that is more fine-grained than a
mouse, especially absolute devices. For example the VirtualBox device has an
abs max of 32767, so a simple motion may have a delta of to 2000 units and
that results in 200 scroll events. That's a bit excessive.
Related to: https://bugs.freedesktop.org/show_bug.cgi?id=93617
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The Logitech G600 has one device with all axes north of ABS_MISC. The current
code assigns ABS_MISC as first axis to map to axis 0, i.e. x. On button press,
one node sends the BTN_LEFT but the other node sends an ABS_MISC with a 1 0
value. ABS_MISC is mapped to axis 0, this moves the pointer to (0, y) on
every button click.
Avoid this by simply mapping any axis other than x/y to at least axis 3, and
make sure we only override the MT 0/1 axes when we actually have MT axes.
https://bugs.freedesktop.org/show_bug.cgi?id=92856
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
It can be used to scale the resolution of a mouse to that of a 1000 DPI
mouse. This can be useful to make high resolution mice less sensitive
without turning off acceleration. The target of 1000 DPI is used as the
same default is used in libinput. If the option is not set no scaling
will be done.
https://bugs.freedesktop.org/show_bug.cgi?id=88134
Signed-off-by: Thomas Hindoe Paaboel Andersen <phomes@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This used to be part of the server but now that we have two drivers doing the
same thing (libinput, evdev) shift the configuration defaults to the driver.
This way you get what you install.
https://bugs.freedesktop.org/show_bug.cgi?id=89023
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Missing from 2c9f4f0380d
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Mostly to make static analyzers happy
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This effectively disables all axes >= ABS_MT_SLOT on those devices. But at
least the device comes up without an error and it didn't work correctly
beforehand anyway.
https://bugs.freedesktop.org/show_bug.cgi?id=89473
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
No functional changes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Just use the server defaults instead. This has very little effect, on most
systems there was some sort of default configuration applied anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=88715
Signed-off-by: Tobias Himmer <provisorisch@online.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Often on Android, we have ABS_MT_POSITION_X without ABS_X (which is contrary
to spec). We add fake ABS_X axis in that case.
X.Org Bug 80470 <http://bugs.freedesktop.org/show_bug.cgi?id=80470>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
When in EVDEV_RELATIVE_MODE, after converting the absolute valuators, the
code unsets pEvdev->abs_queued. This is wrong if there are some absolute
valuators which are not positions, such as a pressure valuators, because
events on these valuators would be lost.
This patch fixes the problem by doing the absolute->relative translation
early. This way, abs_queued is not set and then unset when receiving
absolute valuators representing positions. Other absolute events now set abs_queued
and will be processed.
Signed-off-by: Éric Brunet <Eric.Brunet@lps.ens.fr>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
When not in EVDEV_RELATIVE_MODE, absolute position is stored in old_vals. This serves
no purpose except that old_vals is ready when the device is switched to
EVDEV_RELATIVE_MODE. It is however better to make the copy between old_vals
and abs_vals at the time of the switch rather than all the time.
Signed-off-by: Éric Brunet <Eric.Brunet@lps.ens.fr>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
When not in_proximity, we don't really trust data, even though a valuator
sent just before a in_proximity event might actually be important. The
present code for EVDEV_RELATIVE_MODE throws away all data if not
in_proximity, which is a little bit too much. This patch allows for
relative values to be calculated and old_vals to be updated even if not
in_proximity, but will prevent evdev to sending (presumably) wrong
information to the X server. But at least, old_vals will be correctly
filled when the device comes into proximity again.
Signed-off-by: Éric Brunet <Eric.Brunet@lps.ens.fr>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Now that relative events have their own valuator mask, use it instead of
delta
Signed-off-by: Éric Brunet <Eric.Brunet@lps.ens.fr>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This should hopefully fix bug 84445.
Signed-off-by: Éric Brunet <Eric.Brunet@lps.ens.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Obsolete since 768c25a99b2f4ec07993eb15a0f05a5e22b5c695
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The functions EvdevPostProximityEvents, EvdevPostRelativeMotionEvents,
EvdevPostAbsoluteMotionEvents and EvdevPostQueuedEvents are only called
by EvdevProcessSyncEvent. These functions take as arguments an array of
valuators which is set by EvdevProcessSyncEvent to contain ... nothing.
This patch changes the prototype of the four functions, their definitions
and the way they are called to remove the useless array of valuators.
Signed-off-by: Éric Brunet <Eric.Brunet@lps.ens.fr>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
In the current code, if only IgnoreRelativeAxes is set, the code would go on
and force absolute axes to initialize even if the relative axes were
successfully initialized.
Evdev gives precedence to relative axes anyway, initializing absolute axes if
the relative axes failed. Thus, if we explicitely want relative axes but leave
the abs axes as-is, proceed as normal.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The Xen Virtual Pointer device has ABS_X, ABS_Y and REL_WHEEL. If smooth
scrolling is detected, the current code would first initialize relative axes
for scrolling and immediately overwrite those axes when the abs valuators are
written out.
This patch fixes the default case only, in the case of a device setting the
two Ignore*Axis options both to "off", the axes are still overwritten. The
wheels will work, other axes only if the same number of abs axes exists. And
it keeps the current memory leak too, but it's marked with a FIXME now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The previous approach only had the slot state for the current slot. If we
changed slots, that means we lost the information if the slot was ever
initialized. If the ABS_MT_TRACKING_ID was never received, the slot would
still update and try to send events (which the server refused with a warning).
Avoid this by having a per-slot state and a dirty bit that tells us if the
current slot updated at all. If we don't get the tracking ID, leave the slot
empty and refuse any further events from that touch.
This quashes the various "unable to find touch point 0" warnings caused if a
touchpoint starts before the device is enabled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Walter Harms <wharms@bfs.de>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
EvdevAddDevice/EvdevRemoveDevice keep a reference to the device to detect
duplicate devices based on the dev_t.
EvdevAddDevices was called during PreInit, EvdevRemoveDevice was called during
DEVICE_CLOSE. That makes it imbalanced if the device succeeds PreInit but the
server skips everything else because MAX_DEVICES is exceeded. So for all
devices after MAX_DEVICES, we'd add a reference but never remove it,
eventually reading/writing past evdev_devices.
The server keeps the list of devices for us anyway, so remove the copy of all
the pointers and instead run through the device list the server gives us.
X.Org Bug 78309 <http://bugs.freedesktop.org/show_bug.cgi?id=78309>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This was the original behavior introduced in
f77410e1f97d394e98c854fd174f712666b0544c and stayed that way until smooth
scrolling erroneously added it as vertical axis in
b450efdf95999cad08de23ce069f04a66bdae24b. Revert to horizontal scrolling to
restore the previous behaviour - which unbreaks scrolling on Microsoft mice.
This effectively reverts 54a3120e339e55fc4721543abb15692c3e9ede09 too.
X.Org Bug 73105 <http://bugs.freedesktop.org/show_bug.cgi?id=73105>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Whoops, the vertical axis is swapped, so when changing the axis we also need
to change the direction.
This reverts commit 16c85cbeacb721ed365c6240aabaad921b811fe0.
|
|
This was the original behavior introduced in
f77410e1f97d394e98c854fd174f712666b0544c and stayed that way until smooth
scrolling erroneously added it as vertical axis in
b450efdf95999cad08de23ce069f04a66bdae24b. Revert to horizontal scrolling to
restore the previous behaviour - which unbreaks scrolling on Microsoft mice.
This effectively reverts 54a3120e339e55fc4721543abb15692c3e9ede09 too.
X.Org Bug 73105 <http://bugs.freedesktop.org/show_bug.cgi?id=73105>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
wheel emulation, for some reasons beyond time, got the value from
pEvdev->vals, then set the value back into pEvdev->vals. Alas, that value is
always 0, hence oldValue is zero and the delta is nil.
If we're not in relative (touchpad) mode, store the current value in
old_vals, so they're retrievable for the next event.
X.Org Bug 68415 <http://bugs.freedesktop.org/show_bug.cgi?id=68415>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
A new property "Evdev Scrolling Distance" is created that holds three values
(vertical, horizontal and dial).
Signed-off-by: Peter De Wachter <pdewacht@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This patch creates three new xorg.conf options, VertScrollDelta,
HorizScrollDelta and DialDelta, which adjust the sensitivity of
smooth scrolling. These options take a positive integer, default
value is 1.
Signed-off-by: Peter De Wachter <pdewacht@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This was supposed to be added in 43e270fb7a10da20ab89dd699839c1cb6df119b4, but
got lost somehow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
|
