| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
hw.x and the motion history are integers so our deltas are always integers.
It's a bit pointless to split them into the fractional and integral part.
obsolete since defc1d008e5674306a or so
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
If opening the fd fails we still need to fail the device. This is particularly
the case when a device disappears before we can open it - the current code
wouldn't exit but instead switch to auto-probe touchpad devices on the system.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
When ignoring modifiers, ensure the touchpad is enabled once a modifier
key is pressed disregarding any previous key press that caused the
touchpad to be disabled.
Signed-off-by: Anton Lindqvist <anton.lindqvist@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Use input_lock/input_unlock calls instead of SIGIO functions
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Bump up the synaptics driver to 70, so it get's preferred over libinput, which
was dropped down to 60. The synaptics driver is more of a leaf package
than libinput (which covers a multitude of device types) and can be removed by
default. When specifically installed by the user, the synaptics driver should
override the system default.
Similar to what was done for wacom configuration file.
https://bugzilla.suse.com/show_bug.cgi?id=979554
Signed-off-by: Stefan Dirsch <sndirsch@suse.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Fallout from 90c6d7fc60f3db1bd9db1c7702062fcaef3b3352 where it got changed to
100ms. This is too short for triple-tap-and-drag gestures so revert it to the
previous value.
https://bugs.freedesktop.org/show_bug.cgi?id=95171
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This was a bad idea. No-one seems to use this and it gives us little benefits.
To even get this feature a number of other features need to be turned off
(like two-finger scrolling and tapping). Many of these are enabled by default,
if they are disabled a client stack with full touchpad gesture support could
in theory support true touchpad gestures. This has never happened.
Drop the touch events from the synaptics driver. This allows us to switch the
touchpad fully over to look like a relative device, thus also removing the
bug that changes the touchpad speed whenever a monitor is added/removed in.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Usually doesn't happen, but the evtest output in
https://bugs.freedesktop.org/show_bug.cgi?id=90392
actually has repeat events for the button. Ignore them if they happen.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
An MT device without X/Y is not a touchpad. And neither are fake MT devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
This came up as a kernel bug, but it's valid to create uinput devices with a
min == max range for x/y. Technically valid, but effectively useless, so catch
it, complain and hobble on along.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
This reverts commit 064445364b4775b25ba49c2250b22b169f291147.
The Lenovo *50 series, including the X1 Carbon 3rd always require multiple
kernel patches to enable the touchpad buttons. This patch in synaptics only
addresses the re-routing of the top buttons.
The final iteration of the kernel patches also route the trackpoint buttons
through the trackpoint device, rendering this patch unnecessary. These patches
are queued for 4.0.
See kernel patch series up to commit cdd9dc195916ef5644cfac079094c3c1d1616e4c
Author: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Date: Sun Mar 8 22:35:41 2015 -0700
Input: synaptics - re-route tracksticks buttons on the Lenovo 2015 series
Currently in Dmitry's for-linus branch.
Distributions running older kernels or the kernel stable series which has
partial backports of the above patch series are encouraged to leave the
0644453 commit in and undo this revert.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Some applications ignore the second tap of double taps because of the
lack of a delay between the button down and button up events.
Prevent this by replacing the transition from TS_2B to TS_START with a
transition from TS_2B to TS_SINGLETAP that emits only a button down
event. The button up event will be emitted when transitioning from
TS_SINGLETAP to TS_START.
In addition, decrease the default value of MaxDoubleTapTime from 180 ms
to 100 ms in order to make double taps faster.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This device has the trackpoint buttons wired up to the touchpad to send BTN_0,
BTN_1 and BTN_2 for left, right, middle. This conflicts with previous
touchpads that used those event codes for dedicated scroll buttons.
Add an option HasTrackpointButtons that can be set via a xorg.conf.d
snippets. This option is not intended as a user-set option, rather
we expect distributions to ship some conglomerate of udev/hal rules with
xorg.conf snippets that take effect.
If the option is set, we look at the three affected buttons at the beginning
of HandleState and send button events immediately for them. The HW state is
reset to neutral and other processing continues. This saves us from having to
synchronize these buttons with software buttons (also present on this device),
tapping, etc.
Since the buttons are physically different and (mentally) associated with the
trackpoint device we also don't need to worry about having finger motion event
correctly synced up with the button presses - it's acceptable to send the
presses before the motion events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
|
|
The diagram didn't entirely reflect the current state of the code.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
FastTap was removed with d14ea867ad5d ("Purge fast-taps option"),
remove all of what remained.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The palm detection relies on both the width and the pressure.
a897147be04 ("Use ABS_MT events for the palm detection when supported")
assumed that all the touch devices can report both ABS_MT_TOUCH_MAJOR
and ABS_MT_PRESSURE, but this is not necessarily true. This assumption
could hence break the palm detection when at least one of the mentioned
events is not declared but both ABS_TOOL_WIDTH and ABS_PRESSURE are
reported.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Use ABS_MT_TOUCH_MAJOR and ABS_MT_PRESSURE instead of ABS_TOOL_WIDTH
and ABS_PRESSURE when supported so that the pressure and the width of
all the fingers is taken into account for the palm detection.
This also fixes the palm detection for those touchpads for which the
kernel only sends ABS_MT_TOUCH_MAJOR and not ABS_TOOL_WIDTH.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Touchpads are limited by a fixed sampling rate (usually 80Hz). Some finger
changes may happen too fast for this sampling rate, resulting in two distinct
event sequences:
* finger 1 up and finger 2 down in the same EV_SYN frame. Synaptics sees one
finger down before and after and the changed coordinates
* finger 1 up and finger 2 down _between_ two EV_SYN frames. Synaptics sees one
touchpoint move from f1 position to f2 position.
That move causes a large cursor jump. The former could be solved (with
difficulty) by adding fake EV_SYN handling after releasing touchpoints but
that won't fix the latter case.
So as a solution for now limit the finger movement to 20mm per event.
Tests on a T440 and an x220 showed that this is just above what a reasonable
finger movement would trigger. If a movement is greater than that limit, reset
it to 0/0.
On devices without resolution, use 0.25 of the touchpad's diagonal instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Default resolution is 1, don't allow setting 0 to avoid divisions by 0 or
just general weirdness.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
open_slots holds the slot index, resetting it to 0 is a bad idea. And make
sure that we do reset after DEVICE_INIT. We already do so on DEVICE_CLOSE, but
after the first DEVICE_ON the data could still be random.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
And warn when we run out of labels.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
xf86-input-synaptics-1.8.0/src/synaptics.c:498: var_compare_op: Comparing
"end_str" to null implies that "end_str" might be null.
end_str can't be null, so no need for this check and no need to get Coverity
all confused.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Just to make it explicit
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Default on evdev devices is CLOCK_REALTIME. If that clock falls behind the
server's CLOCK_MONOTONIC, motion after a clickpad click may be delayed by the
difference in the clocks.
In detail:
When the timer func is triggered, GetTimeInMillis() which is CLOCK_MONOTONIC,
is stored as hwState->millis. The eventcomm backend uses struct
input_event time (CLOCK_REALTIME).
When we read events from the device, if the evdev time is less than the server
time, the fix for (#48777) sets the current event time to hwState->millis.
Until the evdev time overtakes that stored time, all events have the
hwState->millis time.
If during that time a clickpad triggers a physical click,
clickpad_click_millis is set to hwState->millis + the ignore-motion timeout.
Thus, all motion is ignored until the event time overtakes that stored
time.
The whole issue is further enhanced by us unconditionally setting the timer
func if we get any events, which is a separate issue anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
In file included from /usr/include/string.h:634:0,
from /usr/include/xorg/os.h:53,
from /usr/include/xorg/misc.h:115,
from /usr/include/xorg/xf86str.h:37,
from /usr/include/xorg/xf86Xinput.h:54,
from synproto.h:36,
from synproto.c:24:
/usr/include/xorg/os.h:579:1: error: expected identifier or '(' before '__extension__'
strndup(const char *str, size_t n);
See http://lists.freedesktop.org/archives/xorg-devel/2014-July/043070.html
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Potentially uninitialized, false positive in both cases.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
When two fingers are used, the coordinates of only one of them is taken into
account. This can lead to sudden variations of the absolute coordinates when
two-fingers taps are performed if the finger considered changes.
Take into account coordinates variations to prevent unwanted taps only if
the number of fingers doesn't change.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Per-device logging functions don't interfere with other drivers if they also
use libevdev, so use those instead the global log handler if available. If not
available, drop libevdev logging, I don't want to maintain the ifdef mess and
the logging doesn't give us _that_ much benefit.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
We had reports that the top software button area is hard to hit for those
using the trackpoint and clicking the buttons with their thumb.
Analysis of event recordings (3 different people) for left, right and middle
clicks shows that there is a significant amount of events up to about 10mm
(with outliers up to 12mm) from the top of the touchpad. That maps to 15%.
Interestingly, the middle button does not seem to need this, presumably the
haptic feedback of the little dots sticking out from the surface make hitting
the button easier. Its size is increased to 15% anyway, for simplicity and
because a sample set of 3 is too small to be definitive about this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
When we required a grab on the device, this was a shortcut so we didn't have
to query the device only to realise we can't read events off it anyway. Now
that we don't actually grab the device by default, this is unnecessary.
Something else may have a temporary grab on the device during init, in which
case we just continue as usual and read events if and when they become
available.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Rely on INPUT_PROP_TOP_BUTTONPAD and default button areas as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Some Macbooks are being tagged as MODEL_UNIBODY_MACBOOKs when they should not
be. This causes the default sensitivity to be very low for them, making the
touchpad almost unusable. This change puts those devices into the correct
bucket again.
Signed-off-by: Clinton Sprain <clintonsprain@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Add a HasSecondaryButtons boolean config option which defaults to true for
devices with the INPUT_PROP_TOPBUTTONPAD and false for all other devices.
Only parse the SecondarySoftButtonAreas when this option is true, effectively
disabling the top buttons when it is false. Likewise, only initialize the
SecondarySoftButtonAreas property if we enable support for it.
This means that it is now safe to always set a SecondarySoftButtonAreas
default in 50-synaptics.conf, and that he section which was intended for
use with future pnp-id matching can be dropped, as that is now all handled
in the kernel.
While at also remove the comment about disabling the bottom edge area, as that
is now done automatically.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
When trying to do a 3 fingerclick on a touchpad which only tracks 2 touches,
this may register as a 3 or 2 fingerclick depending on the order in which
the touchpad detects the fingers. If the 2 outer fingers of the 3 get seen
first, then the 2 touches will be too far apart for the heuristic to see
them as being close together, and the click gets counted as a 2 finger click.
A user will likely never do a 2 finger click with a 3th finger resting
somewhere else on the pad, where-as the above misdetection of the clicks is
a real issue, so simply always count a click with trippletap set as a
3 finger click on pads which track less then 3 touches.
https://bugzilla.redhat.com/show_bug.cgi?id=1086218
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
And expand DMI strings to more precise matches
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Everytime I look at this I get confused about OPEN_EMPTY vs EMPTY. Let's fix
that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
This is a bit problematic: libevdev only has one global log handler.
So if we have another driver use libevdev, we'll either overwrite that handler
or get overwritten, whichever comes first. So we need to re-set the handler
every time we get an event to make sure we log through our handler.
Likewise, if we ever drop the device, we need to unset the log handler back to
NULL because we may unload the module and our handler may disappear.
Use the lowest logging priority, let the server filter based on the verbosity
level instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Once the sync finishes, we get -EAGAIN. This only indicates the sync is done,
but some events may still be waiting in the pipe for us to read. We must read
those now, otherwise select may not trigger on further data.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
last_mt_vals_slot is only used in one location and there we can just use
cur_slot
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
This was required when we started supporting hotplugging to avoid duplicate
events. These days the drawback of not being able to record events in the case
of a bug is significant.
Check the configuration source on init. If the device was hotplugged through a
a server config backend, disable the grab. If the device was statically
configured through an xorg.conf then leave the default grab enabled to avoid
a duplicate device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
