path: root/man/synaptics.man

.\" shorthand for double quote that works everywhere.
.ds q \N'34'
.TH SYNAPTICS __drivermansuffix__ __vendorversion__
.SH NAME
synaptics \- Synaptics touchpad input driver
.SH SYNOPSIS
.nf
.B "Section \*qInputDevice\*q"
.BI "  Identifier \*q" devname \*q
.B  "  Driver \*qsynaptics\*q"
.BI "  Option \*qDevice\*q   \*q" devpath \*q
.BI "  Option \*qPath\*q     \*q" path \*q
\ \ ...
.B EndSection
.fi
.SH DESCRIPTION
.B synaptics
is an __xservername__ input driver for the touchpads from Synaptics
Incorporated. Even tough these touchpads (by default, operating in a
compatibility mode emulating a standard mouse) can be handled by the normal
evdev or mouse drivers, this driver allows more advanced features of the
touchpad to become available. Some benefits would be:
.IP \(bu 4
Movement with adjustable, non-linear acceleration and speed.
.IP \(bu 4
Button events through short touching of the touchpad.
.IP \(bu 4
Double-Button events through double short touching of the touchpad.
.IP \(bu 4
Dragging through short touching and holding down the finger on the
touchpad.
.IP \(bu 4
Middle and right button events on the upper and lower corner of the
touchpad.
.IP \(bu 4
Vertical scrolling (button four and five events) through moving the
finger on the right side of the touchpad.
.IP \(bu 4
The up/down button sends button four/five events.
.IP \(bu 4
Horizontal scrolling (button six and seven events) through moving the
finger on the lower side of the touchpad.
.IP \(bu 4
The multi-buttons send button four/five events for vertical scrolling
and button six/seven events for horizontal scrolling.
.IP \(bu 4
Adjustable finger detection.
.IP \(bu 4
Multifinger taps: two finger for middle button and three finger for
right button events.
.
(Needs hardware support.
.
Not all models implement this feature.)
.IP \(bu 4
Pressure dependent motion speed.
.IP \(bu 4
Run-time configuration using shared memory. This means you can change
parameter settings without restarting the X server.
.LP
Note that depending on the touchpad firmware, some of these features
might be available even without using the synaptics driver. Note also
that some functions are not available on all touchpad models, because
they need support from the touchpad hardware/firmware. (Multifinger
taps for example.)
.PP
.SH CONFIGURATION DETAILS
Please refer to __xconfigfile__(__filemansuffix__) for general configuration
details and for options that can be used with all input drivers.  This
section only covers configuration details specific to this driver.
.
If you have the SHMConfig parameter enabled, these parameters can also
be changed at runtime with the synclient(1) program.
.PP
The following driver
.B Options
are supported:
.TP 7
.BI "Option \*qDevice\*q \*q" string \*q
This option specifies the device file in your \*q/dev\*q directory which will
be used to access the physical device. Normally you should use something like
\*q/dev/input/eventX\*q, where X is some integer.
.TP 7
.BI "Option \*qProtocol\*q \*q" string \*q
Specifies which kernel driver will be used by this driver. This is the list of
supported drivers and their default use scenarios.
.TS
l l.
auto-dev	automatic, default (recommend)
event	Linux 2.6 kernel events
psaux	raw device access (Linux 2.4)
psm	FreeBSD psm driver
.TE
.TP 7
.BI "Option \*qSHMConfig\*q \*q" boolean \*q
Switch on/off shared memory for configuration. This enables the driver to be
configured at runtime. Note that this is considered a security risk since any
user can access the configuration.
.TP 7
.BI "Option \*qLeftEdge\*q \*q" integer \*q
X coordinate for left edge.
.TP 7
.BI "Option \*qRightEdge\*q \*q" integer \*q
X coordinate for right edge. If this option is set,
.BI SpecialScrollAreaRight
is ignored.
.TP 7
.BI "Option \*qTopEdge\*q \*q" integer \*q
Y coordinate for top edge.
.TP 7
.BI "Option \*qBottomEdge\*q \*q" integer \*q
Y coordinate for bottom edge.
.TP 7
.BI "Option \*qSpecialScrollAreaRight\*q \*q" boolean \*q
Some touchpads have a scroll region on the right edge. Disable this option if
you have one but don't want use it as scroll wheel region.
.TP 7
.BI "Option \*qFingerLow\*q \*q" integer \*q
When finger pressure drops below this value, the driver counts it as a
release.
.TP 7
.BI "Option \*qFingerHigh\*q \*q" integer \*q
When finger pressure goes above this value, the driver counts it as a
touch.
.TP 7
.BI "Option \*qFingerPress\*q \*q" integer \*q
When finger pressure goes above this value, the driver counts it as a
press.
.
Currently a press is equivalent to putting the touchpad in trackstick
emulation mode.
.TP 7
.BI "Option \*qMaxTapTime\*q \*q" integer \*q
Maximum time (in milliseconds) for detecting a tap.
.TP 7
.BI "Option \*qBMaxTapMove\*q \*q" integer \*q
Maximum movement of the finger for detecting a tap.
.TP 7
.BI "Option \*qMaxDoubleTapTime\*q \*q" integer \*q
Maximum time (in milliseconds) for detecting a double tap.
.TP 7
.BI "Option \*qClickTime\*q \*q" integer \*q
The duration of the mouse click generated by tapping.
.TP 7
.BI "Option \*qFastTaps\*q \*q" boolean \*q
Makes the driver react faster to a single tap, but also makes double
clicks caused by double tapping slower.
.TP 7
.BI "Option \*qVertEdgeScroll\*q \*q" boolean \*q
Enable vertical scrolling when dragging along the right edge.
.TP 7
.BI "Option \*qHorizEdgeScroll\*q \*q" boolean \*q
Enable horizontal scrolling when dragging along the bottom edge.
.TP 7
.BI "Option \*qCornerCoasting\*q \*q" boolean \*q
Enable edge scrolling to continue while the finger stays in an edge corner.
.TP 7
.BI "Option \*qVertTwoFingerScroll\*q \*q" boolean \*q
Enable vertical scrolling when dragging with two fingers anywhere on
the touchpad.
.TP 7
.BI "Option \*qHorizTwoFingerScroll\*q \*q" boolean \*q
Enable horizontal scrolling when dragging with two fingers anywhere on
the touchpad.
.TP 7
.BI "Option \*qVertScrollDelta\*q \*q" integer \*q
Move distance of the finger for a scroll event.
.TP 7
.BI "Option \*qHorizScrollDelta\*q \*q" integer \*q
Move distance of the finger for a scroll event.
.TP 7
.BI "Option \*qEdgeMotionMinZ\*q \*q" integer \*q
Finger pressure at which minimum edge motion speed is set.
.TP
.BI "Option \*qEdgeMotionMaxZ\*q \*q" integer \*q
Finger pressure at which maximum edge motion speed is set.
.TP
.BI "Option \*qEdgeMotionMinSpeed\*q \*q" integer \*q
Slowest setting for edge motion speed.
.TP
.BI "Option \*qEdgeMotionMaxSpeed\*q \*q" integer \*q
Fastest setting for edge motion speed.
.TP
.BI "Option \*qEdgeMotionUseAlways\*q \*q" boolean \*q
If on, edge motion is also used for normal movements.
.
If off, egde motion is used only when dragging.
.TP
.BI "Option \*qMinSpeed\*q \*q" float \*q
Minimum speed factor.
.TP
.BI "Option \*qMaxSpeed\fR (\*q \*q" float \*q)
Maximum speed factor.
.TP
.BI "Option \*qAccelFactor\fR (\*q \*q" float \*q)
Acceleration factor for normal pointer movements.
.TP
.BI "Option \*qTrackstickSpeed\fR (\*q \*q" float \*q)
Speed scale when in trackstick emulation mode.
.TP
.BI "Option \*qPressureMotionMinZ\*q \*q" integer \*q
Finger pressure at which minimum pressure motion factor is applied.
.TP
.BI "Option \*qPressureMotionMaxZ\*q \*q" integer \*q
Finger pressure at which maximum pressure motion factor is applied.
.TP
.BI "Option \*qPressureMotionMinFactor\*q \*q" integer \*q
Lowest setting for pressure motion factor.
.TP
.BI "Option \*qPressureMotionMaxFactor\*q \*q" integer \*q
Greatest setting for pressure motion factor.
.TP
.BI "Option \*qUpDownScrolling\*q \*q" boolean \*q
If on, the up/down buttons generate button 4/5 events.
.
If off, the up button generates a double click and the down button
generates a button 2 event.
.TP
.BI "Option \*qLeftRightScrolling\*q \*q" boolean \*q
If on, the left/right buttons generate button 6/7 events.
.
If off, the left/right buttons both generate button 2 events.
.TP
.BI "Option \*qUpDownScrollRepeat\*q \*q" boolean \*q
If on, and the up/down buttons are used for scrolling
(\fBUpDownScrolling\fR), these buttons will send auto-repeating 4/5 events,
with the delay between repeats determined by \fBScrollButtonRepeat\fR.
.TP
.BI "Option \*qLeftRightScrollRepeat\*q \*q" boolean \*q
If on, and the left/right buttons are used for scrolling
(\fBLeftRightScrolling\fR), these buttons will send auto-repeating 6/7 events,
with the delay between repeats determined by \fBScrollButtonRepeat\fR.
.TP
.BI "Option \*qScrollButtonRepeat\*q \*q" integer \*q
The number of milliseconds between repeats of button events 4-7 from the
up/down/left/right scroll buttons.
.TP
.BI "Option \*qEmulateMidButtonTime\*q \*q" integer \*q
Maximum time (in milliseconds) for middle button emulation.
.TP
.BI "Option \*qEmulateTwoFingerMinZ\*q \*q" integer \*q
For touchpads not capable of detecting multiple fingers (Alps), this sets the
Z pressure threshold to emulate a two finger press.
.TP
.BI "Option \*qTouchpadOff\*q \*q" integer \*q
Switch off the touchpad.
.
Valid values are:
.TS
l l.
0	Touchpad is enabled
1	Touchpad is switched off
2	Only tapping and scrolling is switched off
.TE
.TP
.BI "Option \*qGuestMouseOff\*q \*q" boolean \*q
Switch on/off guest mouse (often a stick).
.TP
.BI "Option \*qLockedDrags\*q \*q" boolean \*q
If off, a tap and drag gesture ends when you release the finger.
.
If on, the gesture is active until you tap a second time, or until
LockedDragTimeout expires.
.TP
.BI "Option \*qLockedDragTimeout\*q \*q" integer \*q
This parameter specifies how long it takes (in milliseconds) for the
LockedDrags mode to be automatically turned off after the finger is
released from the touchpad.
.TP
.BI "Option \*qRTCornerButton\*q \*q" integer \*q
.
Which mouse button is reported on a right top corner tap.
.
Set to 0 to disable.
.TP
.BI "Option \*qRBCornerButton\*q \*q" integer \*q
Which mouse button is reported on a right bottom corner tap.
.
Set to 0 to disable.
.TP
.BI "Option \*qLTCornerButton\*q \*q" integer \*q
Which mouse button is reported on a left top corner tap.
.
Set to 0 to disable.
.TP
.BI "Option \*qLBCornerButton\*q \*q" integer \*q
Which mouse button is reported on a left bottom corner tap.
.
Set to 0 to disable.
.TP
.BI "Option \*qTapButton1\*q \*q" integer \*q
Which mouse button is reported on a non-corner one-finger tap.
.
Set to 0 to disable.
.TP
.BI "Option \*qTapButton2\*q \*q" integer \*q
Which mouse button is reported on a non-corner two-finger tap.
.
Set to 0 to disable.
.TP
.BI "Option \*qTapButton3\*q \*q" integer \*q
Which mouse button is reported on a non-corner three-finger tap.
.
Set to 0 to disable.
.TP
.BI "Option \*qClickFinger1\*q \*q" integer \*q
Which mouse button is reported when left-clicking with one finger.
.
Set to 0 to disable.
.TP
.BI "Option \*qClickFinger2\*q \*q" integer \*q
Which mouse button is reported when left-clicking with two fingers.
.
Set to 0 to disable.
.TP
.BI "Option \*qClickFinger3\*q \*q" integer \*q
Which mouse button is reported when left-clicking with three fingers.
.
Set to 0 to disable.
.TP
.BI "Option \*qCircularScrolling\*q \*q" boolean \*q
If on, circular scrolling is used.
.TP
.BI "Option \*qCircScrollDelta\fR (\*q \*q" float \*q)
Move angle (radians) of finger to generate a scroll event.
.TP
.BI "Option \*qCircScrollTrigger\*q \*q" integer \*q
Trigger region on the touchpad to start circular scrolling
.TS
l l.
0	All Edges
1	Top Edge
2	Top Right Corner
3	Right Edge
4	Bottom Right Corner
5	Bottom Edge
6	Bottom Left Corner
7	Left Edge
8	Top Left Corner
.TE
.TP
.BI "Option \*qCircularPad\*q \*q" boolean \*q
.
Instead of being a rectangle, the edge is the ellipse enclosed by the
Left/Right/Top/BottomEdge parameters.
.
For circular touchpads.
.TP
.BI "Option \*qPalmDetect\*q \*q" boolean \*q
If palm detection should be enabled.
.
Note that this also requires hardware/firmware support from the
touchpad.
.TP
.BI "Option \*qPalmMinWidth\*q \*q" integer \*q
Minimum finger width at which touch is considered a palm.
.TP
.BI "Option \*qPalmMinZ\*q \*q" integer \*q
Minimum finger pressure at which touch is considered a palm.
.TP
.BI "Option \*qCoastingSpeed\fR (\*q \*q" float \*q)
Coasting threshold scrolling speed.
.
0 disables coasting.
.TP
.BI "Option \*qSingleTapTimeout\*q \*q" integer \*q
Timeout after a tap to recognize it as a single tap.
.TP
.BI "Option \*qGrabEventDevice\*q \*q" boolean \*q
If GrabEventDevice is true, the driver will grab the event device for
exclusive use when using the linux 2.6 event protocol.
.
When using other protocols, this option has no effect.
.
Grabbing the event device means that no other user space or kernel
space program sees the touchpad events. 
.
This is desirable if the X config file includes /dev/input/mice as an
input device, but is undesirable if you want to monitor the device
from user space.
.
When changing this parameter with the synclient program, the change
will not take effect until the synaptics driver is disabled and
reenabled. 
.
This can be achieved by switching to a text console and then switching
back to X.
.
.
.LP
The LeftEdge, RightEdge, TopEdge and BottomEdge parameters are used to
define the edge and corner areas of the touchpad.
.
The parameters split the touchpad area in 9 pieces, like this:
.LP
.TS
l|l|lsls
---
|c|cw(5P)|c|l
---
|c|c|c|l
|c|c|c|l
|c|c|c|l
---
|c|c|c|l
---
|lsl|ll.
	LeftEdge	RightEdge
			Physical top edge
1	2	3
			TopEdge

4	5	6

			BottomEdge
7	8	9
			Physical bottom edge
Physical left edge		Physical right edge
.TE
.LP
Coordinates to the left of LeftEdge are part of the left edge (areas
1, 4 and 7), coordinates to the left of LeftEdge and above TopEdge
(area 1) are part of the upper left corner, etc.
.
A good way to find appropriate edge parameters is to enable the
SHMConfig option and run "synclient \-m 1" to see the x/y coordinates
corresponding to different positions on the touchpad.
.
.LP
A tap event happens when the finger is touched and released in a time
interval shorter than MaxTapTime, and the touch and release
coordinates are less than MaxTapMove units apart.
.
A "touch" event happens when the Z value goes above FingerHigh, and an
"untouch" event happens when the Z value goes below FingerLow.
.
.LP
The MaxDoubleTapTime parameter has the same function as the MaxTapTime
parameter, but for the second, third, etc tap in a tap sequence.
.
If you can't perform double clicks fast enough (for example, xmms
depends on fast double clicks), try reducing this parameter.
.
If you can't get word selection to work in xterm (ie button down,
button up, button down, move mouse), try increasing this parameter.
.
.LP
The ClickTime parameter controls the delay between the button down and
button up X events generated in response to a tap event.
.
A too long value can cause undesirable autorepeat in scroll bars and a
too small value means that visual feedback from the gui application
you are interacting with is harder to see.
.
For this parameter to have any effect, "FastTaps" has to be disabled.
.
.LP
The MinSpeed, MaxSpeed and AccelFactor parameters control the pointer
motion speed.
.
The speed value defines the scaling between touchpad coordinates and
screen coordinates.
.
When moving the finger very slowly, the MinSpeed value is used, when
moving very fast the MaxSpeed value is used.
.
When moving the finger at moderate speed, you get a pointer motion
speed somewhere between MinSpeed and MaxSpeed.
.
If you don't want any acceleration, set MinSpeed and MaxSpeed to the
same value.
.
.LP
The MinSpeed, MaxSpeed and AccelFactor parameters don't have any
effect on scrolling speed.
.
Scrolling speed is determined solely from the VertScrollDelta and
HorizScrollDelta parameters.
.
To disable vertical or horizontal scrolling, set VertScrollDelta or
HorizScrollDelta to zero.
.
.LP
When hitting an egde, movement can be automatically continued.
.
If EdgeMotionUseAlways is false, edge motion is only used when
dragging.
.
With EdgeMotionUseAlways set to true, it is also used for normal
cursor movements.
.
.LP
Edge motion speed is calculated by taking into account the amount of
pressure applied to the touchpad.
.
The sensitivity can be adjusted using the EdgeMotion parameters.
.
If the pressure is below EdgeMotionMinZ, EdgeMotionMinSpeed is used,
and if the pressure is greater than EdgeMotionMaxZ, EdgeMotionMaxSpeed
is used.
.
For a pressure value between EdgeMotionMinZ and EdgeMotionMaxZ, the
speed is increased linearly.
.
.LP
When pressure motion is activated, the cursor motion speed depends
on the pressure exerted on the touchpad (the more pressure exerted on
the touchpad, the faster the pointer).
.
More precisely the speed is first calculated according to MinSpeed,
MaxSpeed and AccelFactor, and then is multiplied by a sensitivity
factor.
.
The sensitivity factor can be adjusted using the PressureMotion
parameters.
.
If the pressure is below PressureMotionMinZ, PressureMotionMinFactor
is used, and if the pressure is greater than PressureMotionMaxZ,
PressureMotionMaxFactor is used.
.
By default, PressureMotionMinZ and PressureMotionMaxZ are equal to
EdgeMotionMinZ and EdgeMotionMaxZ.
.
For a pressure value between PressureMotionMinZ and
PressureMotionMaxZ, the factor is increased linearly.
.
.LP
Since most synaptics touchpad models don't have a button that
corresponds to the middle button on a mouse, the driver can emulate
middle mouse button events.
.
If you press both the left and right mouse buttons at almost the same
time (no more than EmulateMidButtonTime milliseconds apart) the driver
generates a middle mouse button event.
.
.LP
Circular scrolling acts like a scrolling wheel on the touchpad.
.
Scrolling is engaged when a drag starts in the given CircScrollTrigger
region, which can be all edges, a particular side, or a particular
corner.
.
Once scrolling is engaged, moving your finger in clockwise circles
around the center of the touchpad will generate scroll down events and
counter clockwise motion will generate scroll up events.
.
Lifting your finger will disengage circular scrolling.
.
Use tight circles near the center of the pad for fast scrolling and
large circles for better control.
.
When used together with vertical scrolling, hitting the upper or lower
right corner will seamlessly switch over from vertical to circular
scrolling.
.
.LP
Coasting is enabled by setting the CoastingSpeed parameter to a
non-zero value.
.
Coasting comes in two flavors: conventional (finger off) coasting, and
corner (finger on) coasting.
.LP
Conventional coasting is enabled when coasting is enabled,
and CornerCoasting is set to false.
.
When conventional coasting is enabled, horizontal/vertical scrolling
can continue after the finger is released from the lower/right edge of
the touchpad.
.
The driver computes the scrolling speed corresponding to the finger
speed immediately before the finger leaves the touchpad.
.
If this scrolling speed is larger than the CoastingSpeed parameter
(measured in scroll events per second), the scrolling will continue
with the same speed in the same direction until the finger touches the
touchpad again.
.
.LP
Corner coasting is enabled when coasting is enabled, and
CornerCoasting is set to true.
.
When corner coasting is enabled, edge scrolling can continue as long
as the finger stays in a corner.
.
Coasting begins when the finger enters the corner, and continues until
the finger leaves the corner.
.
CornerCoasting takes precedence over the seamless switch from edge
scrolling to circular scrolling.  That is, if CornerCoasting is
active, scrolling will stop, and circular scrolling will not start,
when the finger leaves the corner.
.
.LP
Trackstick emulation mode is entered when pressing the finger hard on
the touchpad.
.
The FingerPress parameter controls the minimum required finger
pressure.
.
If the finger hasn't moved more than MaxTapMove after MaxTapTime has
elapsed, trackstick mode is entered.
.
In this mode, moving the finger slightly in any direction gives a
speed vector that moves the pointer.
.
The TrackstickSpeed parameter controls the ratio between pointer speed
and finger movement distance.
.
Trackstick mode is exited when the finger pressure drops below
FingerLow or when the finger is moved further than MaxTapMove away
from the initial position.
.SH "NOTES"
There is an example hal policy file in
.I ${sourcecode}/fdi/11-x11-synaptics.fdi
which will enable the driver based on the information if the hardware
is available. Feel free to copy it to
.I /etc/hal/fdi/policy
and customize it to your needs. You can pass custom options to the driver
using x11_options properties. Note that this requires xorg-server-1.5 or
higher.
.LP
If either of
.BI "Protocol \*q" auto-dev \*q
(default) or
.BI "Protocol \*q" event \*q
is used, the driver initializes defaults based on the capabilities reported by
the kernel driver. Acceleration and edges are based on the dimensions reported
by the kernel. If the kernel reports multi-finger detection, two-finger
vertical scrolling is enabled, horizontal two-finger scrolling is disabled and
edge scrolling is disabled. If no multi-finger capabilities are reported,
edge scrolling is enabled for both horizontal and vertical scrolling.

.SH "REMOVED OPTIONS"
The following options are no longer part of the driver configuration:
.TP
.BI "Option \*qRepeater\*q \*q" string \*q
.TP
.BI "Option \*qHistorySize\*q \*q" integer \*q

.SH "AUTHORS"
.LP
Peter Osterlund <petero2@telia.com> and many others.
.SH "SEE ALSO"
.LP
__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__), synclient(__appmansuffix__), syndaemon(__appmansuffix__)