Check in generated README files

1 files changed, 113 insertions, 0 deletions

diff --git a/README b/README
new file mode 100644
index 0000000..31b7bcc
--- /dev/null
+++ b/README
@@ -0,0 +1,113 @@
+$XFree86: xc/programs/Xserver/hw/xfree86/drivers/apm/README,v 1.5 2000/02/11 22:35:55 dawes Exp $
+
+Note 1: This driver is work in progress. It might not work at all.
+Want to help? Docs are at 
+ftp://beta.xfree86.org/pub/xf86/devel/Documentation/apm
+
+This is the Alliance Promotion driver for XFree86 4.0+. It currently only
+supports the AT3D, AT25 chipsets (found on various Voodoo-Rush cards) and AT24.
+There is incomplete support for the 6422. The 6422 chips are supported in the
+XFree86 3.3.x series.
+
+What has worked on my computer :
+    - XAA for 8/16/24/32 bpp
+    - DGA and DGA2
+    - DPMS
+    - glide2x
+    - using as a module
+    - shadow framebuffer
+    - AT3D
+    - AT24
+    - AP6422 (although with problems, including locks)
+    - multi card setup (with and without Xinerama)
+    - Xv images, even with (slightly modified) glide2x ; note that there is
+      still a little problem with vertical offset.
+
+There is some support for PC-98 with the help of Isao Ohishi
+(ohishi@aero.rim.or.jp). It's still under development. I hope that 8bpp
+works correctly.
+
+What has not worked :
+    - I2C (I'm not sure my card, Hercules 128/3D, has proper cabling)
+
+What is untested :
+
+What should be done :
+    - overlays (with the video engine, everything should be overlayable
+      with everything)
+    - (why not) 3210 support
+
+
+       Loïc Grenié
+
+Authors:
+-----------------------------------------------------------------------
+Kent Hamilton    Initial creation.
+Henrik Harmsen   Lots of additions and fixes.  <hch@cd.chalmers.se>
+Loic Grenie      Conversion to 4.0.            <grenie@lami.univ-evry.fr>
+		 Additions and fixes.
+
+
+History:
+-----------------------------------------------------------------------
+Created by Kent Hamilton for Xfree86 from source from Alliance
+
+Modified 1997-06 by Henrik Harmsen
+  - Added support for AT3D
+  - Acceleration added for 8,16,32bpp: (for AT3D and AT24)
+    - Filled rectangles
+    - Screen-screen bitblts
+    - Host-screen color expansion bitblts for text
+  - DPMS support
+  - Enabled hardware cursor code (also in 8bpp)
+  - Set to programmable VCLK clock
+  - Set MCLK to 57.3 MHz on AT3D.
+  - Various bugfixes and cleanups
+
+Modified 1997-07-06 by Henrik Harmsen
+  - Fixed bug that made the HW cursor screw up on VT switches
+  - Probably fixed bug that screwed up the screen when using
+    screen-screen bitblts. This forced me to put an ApmSync() at 
+    the end of ApmSubsequentScreenToScreenCopy() which makes
+    me unhappy... But: Better it works than not...
+
+Modified 1997-10-19 by Henrik Harmsen
+  - HW line drawing.
+  - HW clipping.
+  - Added support for ROP's.
+  - Text acceleration now lots faster and support for accelerated
+    proportional text. (Uses SCANLINE_PAD_DWORD + clipping).
+  - Combined write for many register writes gives good 
+    general speedup. (write x+y as a single 32 bit entity, rather
+    obvious, really...:-)
+  - Now waits for correct number of free slots in FIFO before
+    issuing writes to the card.
+    This seems to have eliminated the last instances of dropped
+    interrupts from serial IO and no more lost packets in PPP :-)
+  - Converted cursor support to use XAA interface.
+  - Fixed ApmSync(). Finally removed call to ApmSync at end of
+    ApmSubsequentScreenToScreenCopy() :-)
+
+Modified 1998-03-29 by Henrik Harmsen
+  - Added DGA support.
+  - Added accel support for AP6422. Fixed AT24 accel support.
+  - Fixed clock register calculation for AP6422 and AT24.
+  - DPMS support for AT24 & AP6422.
+  - 2% faster text accel for AT24/AT3D :-)
+
+Modified 1998-12-18 by Loic Grenie
+  - Converted to Xfree86 4.0 driver interface. (Only support for 
+    AT25/AT3D chips).
+
+Modified 1999-03-14 by Henrik Harmsen
+  - Various fixes to bring it up to 3.9Pd.
+  - Added preliminary (completely untested) support for dynamic 
+    loading.
+
+Modified 1999-07-07 by Loïc Grenié
+  - Converted to new RAC. Support for DGA and DGA2, I2C, Rush extension.
+
+Modified 2000-02-10 by Loïc Grenié
+  - Bug fixes
+  - AP6422 (bugged !)
+  - Xv driver