Initial revision

1 files changed, 2164 insertions, 0 deletions

diff --git a/src/atimach64.c b/src/atimach64.c
new file mode 100644
index 00000000..1f457e80
--- /dev/null
+++ b/src/atimach64.c
@@ -0,0 +1,2164 @@
+/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64.c,v 1.51 2003/02/24 20:46:54 tsi Exp $ */
+/*
+ * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of Marc Aurele La France not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  Marc Aurele La France makes no representations
+ * about the suitability of this software for any purpose.  It is provided
+ * "as-is" without express or implied warranty.
+ *
+ * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS.  IN NO
+ * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+/*
+ * Copyright 1999-2000 Precision Insight, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.  IN NO EVENT SHALL
+ * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include "ati.h"
+#include "atibus.h"
+#include "atichip.h"
+#include "atidac.h"
+#include "atimach64.h"
+#include "atimach64io.h"
+#include "atirgb514.h"
+
+#include "miline.h"
+
+#ifndef DPMS_SERVER
+# define DPMS_SERVER
+#endif
+#include "extensions/dpms.h"
+
+/*
+ * X-to-Mach64 mix translation table.
+ */
+static CARD8 ATIMach64ALU[16] =
+{
+    MIX_0,
+    MIX_AND,
+    MIX_SRC_AND_NOT_DST,
+    MIX_SRC,
+    MIX_NOT_SRC_AND_DST,
+    MIX_DST,
+    MIX_XOR,
+    MIX_OR,
+    MIX_NOR,
+    MIX_XNOR,
+    MIX_NOT_DST,
+    MIX_SRC_OR_NOT_DST,
+    MIX_NOT_SRC,
+    MIX_NOT_SRC_OR_DST,
+    MIX_NAND,
+    MIX_1
+};
+
+/*
+ * ATIMach64PreInit --
+ *
+ * This function fills in the Mach64 portion of an ATIHWRec that is common to
+ * all video modes generated by the driver.
+ */
+void
+ATIMach64PreInit
+(
+    ScrnInfoPtr pScreenInfo,
+    ATIPtr      pATI,
+    ATIHWPtr    pATIHW
+)
+{
+    CARD32 bus_cntl, config_cntl;
+    int    tmp;
+
+#ifndef AVOID_CPIO
+
+    if (pATI->depth <= 4)
+        pATIHW->crtc_off_pitch = SetBits(pATI->displayWidth >> 4, CRTC_PITCH);
+    else
+
+#endif /* AVOID_CPIO */
+
+    {
+        pATIHW->crtc_off_pitch = SetBits(pATI->displayWidth >> 3, CRTC_PITCH);
+    }
+
+    if ((pATI->LockData.crtc_gen_cntl & CRTC_CSYNC_EN) && !pATI->OptionCSync)
+    {
+        xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE,
+            "Using composite sync to match input timing.\n");
+        pATI->OptionCSync = TRUE;
+    }
+
+    pATIHW->bus_cntl = bus_cntl = inr(BUS_CNTL);
+    if (pATI->Chip < ATI_CHIP_264VT4)
+        pATIHW->bus_cntl = (pATIHW->bus_cntl & ~BUS_HOST_ERR_INT_EN) |
+            BUS_HOST_ERR_INT;
+    if (pATI->Chip < ATI_CHIP_264VTB)
+    {
+        pATIHW->bus_cntl &= ~(BUS_FIFO_ERR_INT_EN | BUS_ROM_DIS);
+        pATIHW->bus_cntl |= SetBits(15, BUS_FIFO_WS) | BUS_FIFO_ERR_INT;
+    }
+    else if (pATI->MMIOInLinear)
+    {
+        pATIHW->bus_cntl &= ~BUS_APER_REG_DIS;
+    }
+    else
+    {
+        pATIHW->bus_cntl |= BUS_APER_REG_DIS;
+    }
+    if (pATI->Chip >= ATI_CHIP_264VT)
+        pATIHW->bus_cntl |= BUS_EXT_REG_EN;     /* Enable Block 1 */
+
+#ifdef AVOID_CPIO
+
+    pATIHW->mem_vga_wp_sel = SetBits(0, MEM_VGA_WPS0) |
+        SetBits(1, MEM_VGA_WPS1);
+    pATIHW->mem_vga_rp_sel = SetBits(0, MEM_VGA_RPS0) |
+        SetBits(1, MEM_VGA_RPS1);
+
+#else /* AVOID_CPIO */
+
+    pATIHW->mem_vga_wp_sel = SetBits(0, MEM_VGA_WPS0) |
+        SetBits(pATIHW->nPlane, MEM_VGA_WPS1);
+    pATIHW->mem_vga_rp_sel = SetBits(0, MEM_VGA_RPS0) |
+        SetBits(pATIHW->nPlane, MEM_VGA_RPS1);
+
+#endif /* AVOID_CPIO */
+
+    pATIHW->dac_cntl = inr(DAC_CNTL) &
+        ~(DAC1_CLK_SEL | DAC_PALETTE_ACCESS_CNTL | DAC_8BIT_EN);
+    if (pATI->Chip >= ATI_CHIP_264CT)
+        pATIHW->dac_cntl &= ~DAC_FEA_CON_EN;
+    if (pATI->rgbBits == 8)
+        pATIHW->dac_cntl |= DAC_8BIT_EN;
+
+    pATIHW->gen_test_cntl = pATI->LockData.gen_test_cntl & ~GEN_CUR_EN;
+    if (pATI->DAC == ATI_DAC_IBMRGB514)
+        pATIHW->gen_test_cntl |= GEN_OVR_OUTPUT_EN;
+
+    pATIHW->config_cntl = config_cntl = inr(CONFIG_CNTL);
+
+#ifndef AVOID_CPIO
+
+    if (pATI->UseSmallApertures)
+        pATIHW->config_cntl |= CFG_MEM_VGA_AP_EN;
+    else
+
+#endif /* AVOID_CPIO */
+
+    {
+        pATIHW->config_cntl &= ~CFG_MEM_VGA_AP_EN;
+    }
+
+    if (pATI->LinearBase && (pATI->Chip < ATI_CHIP_264CT))
+    {
+        /* Replace linear aperture size and address */
+        pATIHW->config_cntl &= ~(CFG_MEM_AP_LOC | CFG_MEM_AP_SIZE);
+        pATIHW->config_cntl |= SetBits(pATI->LinearBase >> 22, CFG_MEM_AP_LOC);
+        if ((pATI->Chip < ATI_CHIP_264CT) && (pATI->VideoRAM < 4096))
+            pATIHW->config_cntl |= SetBits(1, CFG_MEM_AP_SIZE);
+        else
+            pATIHW->config_cntl |= SetBits(2, CFG_MEM_AP_SIZE);
+    }
+
+    if (pATI->Chip >= ATI_CHIP_264VTB)
+    {
+        pATIHW->mem_cntl = (pATI->LockData.mem_cntl &
+            ~(CTL_MEM_LOWER_APER_ENDIAN | CTL_MEM_UPPER_APER_ENDIAN)) |
+            SetBits(CTL_MEM_APER_BYTE_ENDIAN, CTL_MEM_LOWER_APER_ENDIAN);
+
+        switch (pATI->bitsPerPixel)
+        {
+            default:
+                pATIHW->mem_cntl |= SetBits(CTL_MEM_APER_BYTE_ENDIAN,
+                    CTL_MEM_UPPER_APER_ENDIAN);
+                break;
+
+            case 16:
+                pATIHW->mem_cntl |= SetBits(CTL_MEM_APER_WORD_ENDIAN,
+                    CTL_MEM_UPPER_APER_ENDIAN);
+                break;
+
+            case 32:
+                pATIHW->mem_cntl |= SetBits(CTL_MEM_APER_LONG_ENDIAN,
+                    CTL_MEM_UPPER_APER_ENDIAN);
+                break;
+        }
+
+        pATIHW->mpp_config = inr(MPP_CONFIG);
+        pATIHW->mpp_config &=
+            ~(MPP_PRESCALE | MPP_NSTATES | MPP_FORMAT | MPP_WAIT_STATE |
+              MPP_INSERT_WAIT | MPP_TRISTATE_ADDR | MPP_AUTO_INC_EN |
+              MPP_CHKREQ_EN | MPP_BUFFER_SIZE | MPP_BUFFER_MODE | MPP_BUSY);
+        pATIHW->mpp_config |=
+            (MPP_NSTATES_8 | MPP_FORMAT_DA8 | SetBits(4, MPP_WAIT_STATE) |
+             MPP_CHKRDY_EN | MPP_READ_EARLY | MPP_RW_MODE | MPP_EN);
+        pATIHW->mpp_strobe_seq = inr(MPP_STROBE_SEQ);
+        pATIHW->mpp_strobe_seq &= ~(MPP_STB0_SEQ | MPP_STB1_SEQ);
+        pATIHW->mpp_strobe_seq |=
+            SetBits(0x0087U, MPP_STB0_SEQ) | SetBits(0x0083U, MPP_STB1_SEQ);
+        pATIHW->tvo_cntl = 0;
+    }
+
+    /* Draw engine setup */
+    if (pATI->OptionAccel)
+    {
+        /* Ensure apertures are enabled */
+        outr(BUS_CNTL, pATIHW->bus_cntl);
+        outr(CONFIG_CNTL, pATIHW->config_cntl);
+
+        /*
+         * When possible, max out command FIFO size.
+         */
+        if (pATI->Chip >= ATI_CHIP_264VT4)
+            pATIHW->gui_cntl = inm(GUI_CNTL) & ~CMDFIFO_SIZE_MODE;
+
+        /* Initialise destination registers */
+        pATIHW->dst_off_pitch =
+            SetBits((pATI->displayWidth * pATI->XModifier) >> 3, DST_PITCH);
+        pATIHW->dst_cntl = DST_X_DIR | DST_Y_DIR | DST_LAST_PEL;
+
+        /* Initialise source registers */
+        pATIHW->src_off_pitch = pATIHW->dst_off_pitch;
+        pATIHW->src_width1 = pATIHW->src_height1 =
+            pATIHW->src_width2 = pATIHW->src_height2 = 1;
+        pATIHW->src_cntl = SRC_LINE_X_DIR;
+
+        /* Initialise scissor, allowing for offscreen areas */
+        pATIHW->sc_right = (pATI->displayWidth * pATI->XModifier) - 1;
+        tmp = (pScreenInfo->videoRam * (1024 * 8) /
+            pATI->displayWidth / pATI->bitsPerPixel) - 1;
+        if (tmp > ATIMach64MaxY)
+            tmp = ATIMach64MaxY;
+        pATIHW->sc_bottom = tmp;
+        pATI->sc_left_right = SetWord(pATI->NewHW.sc_right, 1) |
+            SetWord(pATI->NewHW.sc_left, 0);
+        pATI->sc_top_bottom =  SetWord(pATI->NewHW.sc_bottom, 1) |
+            SetWord(pATI->NewHW.sc_top, 0);
+
+        /* Initialise data path */
+        pATIHW->dp_frgd_clr = (CARD32)(-1);
+        pATIHW->dp_write_mask = (CARD32)(-1);
+
+        switch (pATI->depth)
+        {
+            case 8:
+                pATIHW->dp_chain_mask = DP_CHAIN_8BPP;
+                pATIHW->dp_pix_width =
+                    SetBits(PIX_WIDTH_8BPP, DP_DST_PIX_WIDTH) |
+                    SetBits(PIX_WIDTH_8BPP, DP_SRC_PIX_WIDTH) |
+                    SetBits(PIX_WIDTH_1BPP, DP_HOST_PIX_WIDTH);
+                break;
+
+            case 15:
+                pATIHW->dp_chain_mask = DP_CHAIN_15BPP_1555;
+                pATIHW->dp_pix_width =
+                    SetBits(PIX_WIDTH_15BPP, DP_DST_PIX_WIDTH) |
+                    SetBits(PIX_WIDTH_15BPP, DP_SRC_PIX_WIDTH) |
+                    SetBits(PIX_WIDTH_1BPP, DP_HOST_PIX_WIDTH);
+                break;
+
+            case 16:
+                pATIHW->dp_chain_mask = DP_CHAIN_16BPP_565;
+                pATIHW->dp_pix_width =
+                    SetBits(PIX_WIDTH_16BPP, DP_DST_PIX_WIDTH) |
+                    SetBits(PIX_WIDTH_16BPP, DP_SRC_PIX_WIDTH) |
+                    SetBits(PIX_WIDTH_1BPP, DP_HOST_PIX_WIDTH);
+                break;
+
+            case 24:
+                if (pATI->bitsPerPixel == 24)
+                {
+                    pATIHW->dp_chain_mask = DP_CHAIN_24BPP_888;
+                    pATIHW->dp_pix_width =
+                        SetBits(PIX_WIDTH_8BPP, DP_DST_PIX_WIDTH) |
+                        SetBits(PIX_WIDTH_8BPP, DP_SRC_PIX_WIDTH) |
+                        SetBits(PIX_WIDTH_1BPP, DP_HOST_PIX_WIDTH);
+                }
+                else
+                {
+                    pATIHW->dp_chain_mask = DP_CHAIN_32BPP_8888;
+                    pATIHW->dp_pix_width =
+                        SetBits(PIX_WIDTH_32BPP, DP_DST_PIX_WIDTH) |
+                        SetBits(PIX_WIDTH_32BPP, DP_SRC_PIX_WIDTH) |
+                        SetBits(PIX_WIDTH_1BPP, DP_HOST_PIX_WIDTH);
+                }
+                break;
+
+            default:
+                break;
+        }
+
+#if X_BYTE_ORDER == X_LITTLE_ENDIAN
+
+        pATIHW->dp_pix_width |= DP_BYTE_PIX_ORDER;
+
+#endif /* X_BYTE_ORDER */
+
+        pATIHW->dp_mix = SetBits(MIX_SRC, DP_FRGD_MIX) |
+            SetBits(MIX_DST, DP_BKGD_MIX);
+        pATIHW->dp_src = DP_MONO_SRC_ALLONES |
+            SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC);
+
+        /* Initialise colour compare */
+        pATIHW->clr_cmp_msk = (1 << pATI->depth) - 1;
+
+        /* Restore aperture enablement */
+        outr(BUS_CNTL, bus_cntl);
+        outr(CONFIG_CNTL, config_cntl);
+    }
+}
+
+/*
+ * ATIMach64Save --
+ *
+ * This function is called to save the Mach64 portion of the current video
+ * state.
+ */
+void
+ATIMach64Save
+(
+    ATIPtr      pATI,
+    ATIHWPtr    pATIHW
+)
+{
+    pATIHW->crtc_h_total_disp = inr(CRTC_H_TOTAL_DISP);
+    pATIHW->crtc_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID);
+    pATIHW->crtc_v_total_disp = inr(CRTC_V_TOTAL_DISP);
+    pATIHW->crtc_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID);
+
+    pATIHW->crtc_off_pitch = inr(CRTC_OFF_PITCH);
+
+    pATIHW->crtc_gen_cntl = inr(CRTC_GEN_CNTL);
+
+    pATIHW->ovr_clr = inr(OVR_CLR);
+    pATIHW->ovr_wid_left_right = inr(OVR_WID_LEFT_RIGHT);
+    pATIHW->ovr_wid_top_bottom = inr(OVR_WID_TOP_BOTTOM);
+
+    pATIHW->cur_clr0 = inr(CUR_CLR0);
+    pATIHW->cur_clr1 = inr(CUR_CLR1);
+    pATIHW->cur_offset = inr(CUR_OFFSET);
+    pATIHW->cur_horz_vert_posn = inr(CUR_HORZ_VERT_POSN);
+    pATIHW->cur_horz_vert_off = inr(CUR_HORZ_VERT_OFF);
+
+    pATIHW->clock_cntl = inr(CLOCK_CNTL);
+
+    pATIHW->bus_cntl = inr(BUS_CNTL);
+
+    pATIHW->mem_vga_wp_sel = inr(MEM_VGA_WP_SEL);
+    pATIHW->mem_vga_rp_sel = inr(MEM_VGA_RP_SEL);
+
+    pATIHW->dac_cntl = inr(DAC_CNTL);
+
+    pATIHW->config_cntl = inr(CONFIG_CNTL);
+
+    pATIHW->gen_test_cntl = inr(GEN_TEST_CNTL) & ~GEN_CUR_EN;
+
+    if (pATI->Chip >= ATI_CHIP_264VTB)
+    {
+        pATIHW->mem_cntl = inr(MEM_CNTL);
+        pATIHW->mpp_config = inr(MPP_CONFIG);
+        pATIHW->mpp_strobe_seq = inr(MPP_STROBE_SEQ);
+        pATIHW->tvo_cntl = inr(TVO_CNTL);
+    }
+
+    /* Save draw engine state */
+    if (pATI->OptionAccel && (pATIHW == &pATI->OldHW))
+    {
+        /* Ensure apertures are enabled */
+        outr(BUS_CNTL, pATI->NewHW.bus_cntl);
+        outr(CONFIG_CNTL, pATI->NewHW.config_cntl);
+
+        ATIMach64WaitForIdle(pATI);
+
+        /* Save FIFO size */
+        if (pATI->Chip >= ATI_CHIP_264VT4)
+            pATIHW->gui_cntl = inm(GUI_CNTL);
+
+        /* Save destination registers */
+        pATIHW->dst_off_pitch = inm(DST_OFF_PITCH);
+        pATIHW->dst_x = inm(DST_X);
+        pATIHW->dst_y = inm(DST_Y);
+        pATIHW->dst_height = inm(DST_HEIGHT);
+        pATIHW->dst_bres_err = inm(DST_BRES_ERR);
+        pATIHW->dst_bres_inc = inm(DST_BRES_INC);
+        pATIHW->dst_bres_dec = inm(DST_BRES_DEC);
+        pATIHW->dst_cntl = inm(DST_CNTL);
+
+        /* Save source registers */
+        pATIHW->src_off_pitch = inm(SRC_OFF_PITCH);
+        pATIHW->src_x = inm(SRC_X);
+        pATIHW->src_y = inm(SRC_Y);
+        pATIHW->src_width1 = inm(SRC_WIDTH1);
+        pATIHW->src_height1 = inm(SRC_HEIGHT1);
+        pATIHW->src_x_start = inm(SRC_X_START);
+        pATIHW->src_y_start = inm(SRC_Y_START);
+        pATIHW->src_width2 = inm(SRC_WIDTH2);
+        pATIHW->src_height2 = inm(SRC_HEIGHT2);
+        pATIHW->src_cntl = inm(SRC_CNTL);
+
+        /* Save host data register */
+        pATIHW->host_cntl = inm(HOST_CNTL);
+
+        /* Save pattern registers */
+        pATIHW->pat_reg0 = inm(PAT_REG0);
+        pATIHW->pat_reg1 = inm(PAT_REG1);
+        pATIHW->pat_cntl = inm(PAT_CNTL);
+
+        /* Save scissor registers */
+        pATIHW->sc_left = pATI->sc_left = inm(SC_LEFT);
+        pATIHW->sc_right = pATI->sc_right = inm(SC_RIGHT);
+        pATIHW->sc_top = pATI->sc_top = inm(SC_TOP);
+        pATIHW->sc_bottom = pATI->sc_bottom = inm(SC_BOTTOM);
+
+        /* Save data path registers */
+        pATIHW->dp_bkgd_clr = inm(DP_BKGD_CLR);
+        pATIHW->dp_frgd_clr = inm(DP_FRGD_CLR);
+        pATIHW->dp_write_mask = inm(DP_WRITE_MASK);
+        pATIHW->dp_chain_mask = inm(DP_CHAIN_MASK);
+        pATIHW->dp_pix_width = inm(DP_PIX_WIDTH);
+        pATIHW->dp_mix = inm(DP_MIX);
+        pATIHW->dp_src = inm(DP_SRC);
+
+        /* Save colour compare registers */
+        pATIHW->clr_cmp_clr = inm(CLR_CMP_CLR);
+        pATIHW->clr_cmp_msk = inm(CLR_CMP_MSK);
+        pATIHW->clr_cmp_cntl = inm(CLR_CMP_CNTL);
+
+        /* Save context */
+        pATIHW->context_mask = inm(CONTEXT_MASK);
+
+        /* Restore aperture enablement */
+        outr(BUS_CNTL, pATIHW->bus_cntl);
+        outr(CONFIG_CNTL, pATIHW->config_cntl);
+    }
+}
+
+/*
+ * ATIMach64Calculate --
+ *
+ * This function is called to fill in the Mach64 portion of an ATIHWRec.
+ */
+void
+ATIMach64Calculate
+(
+    ATIPtr         pATI,
+    ATIHWPtr       pATIHW,
+    DisplayModePtr pMode
+)
+{
+    int VDisplay;
+
+    /* If not already done adjust horizontal timings */
+    if (!pMode->CrtcHAdjusted)
+    {
+        pMode->CrtcHAdjusted = TRUE;
+        /* XXX Deal with Blank Start/End and overscan later */
+        pMode->CrtcHDisplay = (pMode->HDisplay >> 3) - 1;
+        pMode->CrtcHSyncStart = (pMode->HSyncStart >> 3) - 1;
+        pMode->CrtcHSyncEnd = (pMode->HSyncEnd >> 3) - 1;
+        pMode->CrtcHTotal = (pMode->HTotal >> 3) - 1;
+
+        /* Make adjustments if sync pulse width is out-of-bounds */
+        if ((pMode->CrtcHSyncEnd - pMode->CrtcHSyncStart) >
+            (int)MaxBits(CRTC_H_SYNC_WID))
+            pMode->CrtcHSyncEnd =
+                pMode->CrtcHSyncStart + MaxBits(CRTC_H_SYNC_WID);
+        else if (pMode->CrtcHSyncStart == pMode->CrtcHSyncEnd)
+        {
+            if (pMode->CrtcHDisplay < pMode->CrtcHSyncStart)
+                pMode->CrtcHSyncStart--;
+            else if (pMode->CrtcHSyncEnd < pMode->CrtcHTotal)
+                pMode->CrtcHSyncEnd++;
+        }
+    }
+
+    /*
+     * Always re-do vertical adjustments.
+     */
+    pMode->CrtcVDisplay = pMode->VDisplay;
+    pMode->CrtcVSyncStart = pMode->VSyncStart;
+    pMode->CrtcVSyncEnd = pMode->VSyncEnd;
+    pMode->CrtcVTotal = pMode->VTotal;
+
+    if ((pATI->Chip >= ATI_CHIP_264CT) &&
+        ((pMode->Flags & V_DBLSCAN) || (pMode->VScan > 1)))
+    {
+        pMode->CrtcVDisplay <<= 1;
+        pMode->CrtcVSyncStart <<= 1;
+        pMode->CrtcVSyncEnd <<= 1;
+        pMode->CrtcVTotal <<= 1;
+    }
+
+    /*
+     * Might as well default to the same as VGA with respect to sync
+     * polarities.
+     */
+    if ((!(pMode->Flags & (V_PHSYNC | V_NHSYNC))) ||
+        (!(pMode->Flags & (V_PVSYNC | V_NVSYNC))))
+    {
+        pMode->Flags &= ~(V_PHSYNC | V_NHSYNC | V_PVSYNC | V_NVSYNC);
+
+        if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0))
+            VDisplay = pATI->LCDVertical;
+        else
+            VDisplay = pMode->CrtcVDisplay;
+
+        if (VDisplay < 400)
+            pMode->Flags |= V_PHSYNC | V_NVSYNC;
+        else if (VDisplay < 480)
+            pMode->Flags |= V_NHSYNC | V_PVSYNC;
+        else if (VDisplay < 768)
+            pMode->Flags |= V_NHSYNC | V_NVSYNC;
+        else
+            pMode->Flags |= V_PHSYNC | V_PVSYNC;
+    }
+
+    pMode->CrtcVDisplay--;
+    pMode->CrtcVSyncStart--;
+    pMode->CrtcVSyncEnd--;
+    pMode->CrtcVTotal--;
+    /* Make sure sync pulse is not too wide */
+    if ((pMode->CrtcVSyncEnd - pMode->CrtcVSyncStart) >
+         (int)MaxBits(CRTC_V_SYNC_WID))
+        pMode->CrtcVSyncEnd = pMode->CrtcVSyncStart + MaxBits(CRTC_V_SYNC_WID);
+    pMode->CrtcVAdjusted = TRUE;                /* Redundant */
+
+    /* Build register contents */
+    pATIHW->crtc_h_total_disp =
+        SetBits(pMode->CrtcHTotal, CRTC_H_TOTAL) |
+            SetBits(pMode->CrtcHDisplay, CRTC_H_DISP);
+    pATIHW->crtc_h_sync_strt_wid =
+        SetBits(pMode->CrtcHSyncStart, CRTC_H_SYNC_STRT) |
+            SetBits(pMode->CrtcHSkew, CRTC_H_SYNC_DLY) |         /* ? */
+            SetBits(GetBits(pMode->CrtcHSyncStart, 0x0100U),
+                CRTC_H_SYNC_STRT_HI) |
+            SetBits(pMode->CrtcHSyncEnd - pMode->CrtcHSyncStart,
+                CRTC_H_SYNC_WID);
+    if (pMode->Flags & V_NHSYNC)
+        pATIHW->crtc_h_sync_strt_wid |= CRTC_H_SYNC_POL;
+
+    pATIHW->crtc_v_total_disp =
+        SetBits(pMode->CrtcVTotal, CRTC_V_TOTAL) |
+            SetBits(pMode->CrtcVDisplay, CRTC_V_DISP);
+    pATIHW->crtc_v_sync_strt_wid =
+        SetBits(pMode->CrtcVSyncStart, CRTC_V_SYNC_STRT) |
+            SetBits(pMode->CrtcVSyncEnd - pMode->CrtcVSyncStart,
+                CRTC_V_SYNC_WID);
+    if (pMode->Flags & V_NVSYNC)
+        pATIHW->crtc_v_sync_strt_wid |= CRTC_V_SYNC_POL;
+
+    pATIHW->crtc_gen_cntl = inr(CRTC_GEN_CNTL) &
+        ~(CRTC_DBL_SCAN_EN | CRTC_INTERLACE_EN |
+          CRTC_HSYNC_DIS | CRTC_VSYNC_DIS | CRTC_CSYNC_EN |
+          CRTC_PIX_BY_2_EN | CRTC_DISPLAY_DIS | CRTC_VGA_XOVERSCAN |
+          CRTC_PIX_WIDTH | CRTC_BYTE_PIX_ORDER |
+          CRTC_VGA_128KAP_PAGING | CRTC_VFC_SYNC_TRISTATE |
+          CRTC_LOCK_REGS |              /* Already off, but ... */
+          CRTC_SYNC_TRISTATE | CRTC_DISP_REQ_EN |
+          CRTC_VGA_TEXT_132 | CRTC_CUR_B_TEST);
+    pATIHW->crtc_gen_cntl |=
+        CRTC_EXT_DISP_EN | CRTC_EN | CRTC_VGA_LINEAR | CRTC_CNT_EN;
+    switch (pATI->depth)
+    {
+
+#ifndef AVOID_CPIO
+
+        case 1:
+            pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_1BPP, CRTC_PIX_WIDTH);
+            break;
+
+        case 4:
+            pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_4BPP, CRTC_PIX_WIDTH);
+            break;
+
+#endif /* AVOID_CPIO */
+
+        case 8:
+            pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_8BPP, CRTC_PIX_WIDTH);
+            break;
+
+        case 15:
+            pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_15BPP, CRTC_PIX_WIDTH);
+            break;
+
+        case 16:
+            pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_16BPP, CRTC_PIX_WIDTH);
+            break;
+
+        case 24:
+            if (pATI->bitsPerPixel == 24)
+            {
+                pATIHW->crtc_gen_cntl |=
+                    SetBits(PIX_WIDTH_24BPP, CRTC_PIX_WIDTH);
+                break;
+            }
+            if (pATI->bitsPerPixel != 32)
+                break;
+            /* Fall through */
+
+        case 32:
+            pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_32BPP, CRTC_PIX_WIDTH);
+            break;
+
+        default:
+            break;
+    }
+    if ((pMode->Flags & V_DBLSCAN) || (pMode->VScan > 1))
+        pATIHW->crtc_gen_cntl |= CRTC_DBL_SCAN_EN;
+    if (pMode->Flags & V_INTERLACE)
+        pATIHW->crtc_gen_cntl |= CRTC_INTERLACE_EN;
+    if (pATI->OptionCSync || (pMode->Flags & (V_CSYNC | V_PCSYNC)))
+        pATIHW->crtc_gen_cntl |= CRTC_CSYNC_EN;
+    /* For now, set display FIFO low water mark as high as possible */
+    if (pATI->Chip < ATI_CHIP_264VTB)
+        pATIHW->crtc_gen_cntl |= CRTC_FIFO_LWM;
+}
+
+/*
+ * ATIMach64Set --
+ *
+ * This function is called to load a Mach64's accelerator CRTC and draw engine.
+ */
+void
+ATIMach64Set
+(
+    ATIPtr      pATI,
+    ATIHWPtr    pATIHW
+)
+{
+    /* First, turn off the display */
+    outr(CRTC_GEN_CNTL, pATIHW->crtc_gen_cntl & ~CRTC_EN);
+
+    if ((pATIHW->FeedbackDivider > 0) &&
+        (pATI->ProgrammableClock != ATI_CLOCK_NONE))
+        ATIClockSet(pATI, pATIHW);              /* Programme clock */
+
+    if (pATI->DAC == ATI_DAC_IBMRGB514)
+        ATIRGB514Set(pATI, pATIHW);
+
+    /* Load Mach64 CRTC registers */
+    outr(CRTC_H_TOTAL_DISP, pATIHW->crtc_h_total_disp);
+    outr(CRTC_H_SYNC_STRT_WID, pATIHW->crtc_h_sync_strt_wid);
+    outr(CRTC_V_TOTAL_DISP, pATIHW->crtc_v_total_disp);
+    outr(CRTC_V_SYNC_STRT_WID, pATIHW->crtc_v_sync_strt_wid);
+
+    outr(CRTC_OFF_PITCH, pATIHW->crtc_off_pitch);
+
+    /* Load overscan registers */
+    outr(OVR_CLR, pATIHW->ovr_clr);
+    outr(OVR_WID_LEFT_RIGHT, pATIHW->ovr_wid_left_right);
+    outr(OVR_WID_TOP_BOTTOM, pATIHW->ovr_wid_top_bottom);
+
+    /* Load hardware cursor registers */
+    outr(CUR_CLR0, pATIHW->cur_clr0);
+    outr(CUR_CLR1, pATIHW->cur_clr1);
+    outr(CUR_OFFSET, pATIHW->cur_offset);
+    outr(CUR_HORZ_VERT_POSN, pATIHW->cur_horz_vert_posn);
+    outr(CUR_HORZ_VERT_OFF, pATIHW->cur_horz_vert_off);
+
+    /* Set pixel clock */
+    outr(CLOCK_CNTL, pATIHW->clock_cntl | CLOCK_STROBE);
+
+    outr(GEN_TEST_CNTL, pATIHW->gen_test_cntl | GEN_GUI_EN);
+    outr(GEN_TEST_CNTL, pATIHW->gen_test_cntl);
+    outr(GEN_TEST_CNTL, pATIHW->gen_test_cntl | GEN_GUI_EN);
+
+    /* Finalise CRTC setup and turn on the screen */
+    outr(CRTC_GEN_CNTL, pATIHW->crtc_gen_cntl);
+
+    /* Load draw engine */
+    if (pATI->OptionAccel)
+    {
+        /* Clobber MMIO cache */
+        (void)memset(pATI->MMIOCached, 0, SizeOf(pATI->MMIOCached));
+
+        /* Ensure apertures are enabled */
+        outr(BUS_CNTL, pATI->NewHW.bus_cntl);
+        outr(CONFIG_CNTL, pATI->NewHW.config_cntl);
+
+        pATI->EngineIsBusy = TRUE;      /* Force engine poll */
+        ATIMach64WaitForIdle(pATI);
+
+        /* Load FIFO size */
+        if (pATI->Chip >= ATI_CHIP_264VT4)
+        {
+            outm(GUI_CNTL, pATIHW->gui_cntl);
+            pATI->nAvailableFIFOEntries = 0;
+            ATIMach64PollEngineStatus(pATI);
+        }
+
+        /* Set FIFO depth */
+        pATI->nFIFOEntries = pATI->nAvailableFIFOEntries;
+
+        /* Load destination registers */
+        ATIMach64WaitForFIFO(pATI, 7);
+        outf(DST_OFF_PITCH, pATIHW->dst_off_pitch);
+        outf(DST_Y_X, SetWord(pATIHW->dst_x, 1) | SetWord(pATIHW->dst_y, 0));
+        outf(DST_HEIGHT, pATIHW->dst_height);
+        outf(DST_BRES_ERR, pATIHW->dst_bres_err);
+        outf(DST_BRES_INC, pATIHW->dst_bres_inc);
+        outf(DST_BRES_DEC, pATIHW->dst_bres_dec);
+        outf(DST_CNTL, pATIHW->dst_cntl);
+
+        /* Load source registers */
+        ATIMach64WaitForFIFO(pATI, 6);
+        outf(SRC_OFF_PITCH, pATIHW->src_off_pitch);
+        outf(SRC_Y_X, SetWord(pATIHW->src_x, 1) | SetWord(pATIHW->src_y, 0));
+        outf(SRC_HEIGHT1_WIDTH1,
+            SetWord(pATIHW->src_width1, 1) | SetWord(pATIHW->src_height1, 0));
+        outf(SRC_Y_X_START,
+            SetWord(pATIHW->src_x_start, 1) | SetWord(pATIHW->src_y_start, 0));
+        outf(SRC_HEIGHT2_WIDTH2,
+            SetWord(pATIHW->src_width2, 1) | SetWord(pATIHW->src_height2, 0));
+        outf(SRC_CNTL, pATIHW->src_cntl);
+
+        /* Load host data register */
+        ATIMach64WaitForFIFO(pATI, 1);
+        outf(HOST_CNTL, pATIHW->host_cntl);
+
+        /* Set host transfer window address and size clamp */
+        pATI->pHOST_DATA =
+            (CARD8 *)pATI->pBlock[GetBits(HOST_DATA_0, BLOCK_SELECT)] +
+            (HOST_DATA_0 & MM_IO_SELECT);
+        pATI->nHostFIFOEntries = pATI->nFIFOEntries >> 1;
+        if (pATI->nHostFIFOEntries > 16)
+            pATI->nHostFIFOEntries = 16;
+
+        /* Load pattern registers */
+        ATIMach64WaitForFIFO(pATI, 3);
+        outf(PAT_REG0, pATIHW->pat_reg0);
+        outf(PAT_REG1, pATIHW->pat_reg1);
+        outf(PAT_CNTL, pATIHW->pat_cntl);
+
+        /* Load scissor registers */
+        ATIMach64WaitForFIFO(pATI, 2);
+        outf(SC_LEFT_RIGHT,
+            SetWord(pATIHW->sc_right, 1) | SetWord(pATIHW->sc_left, 0));
+        outf(SC_TOP_BOTTOM,
+            SetWord(pATIHW->sc_bottom, 1) | SetWord(pATIHW->sc_top, 0));
+        pATI->sc_left = pATIHW->sc_left;
+        pATI->sc_right = pATIHW->sc_right;
+        pATI->sc_top = pATIHW->sc_top;
+        pATI->sc_bottom = pATIHW->sc_bottom;
+
+        /* Load data path registers */
+        ATIMach64WaitForFIFO(pATI, 7);
+        outf(DP_BKGD_CLR, pATIHW->dp_bkgd_clr);
+        outf(DP_FRGD_CLR, pATIHW->dp_frgd_clr);
+        outf(DP_WRITE_MASK, pATIHW->dp_write_mask);
+        outf(DP_CHAIN_MASK, pATIHW->dp_chain_mask);
+        outf(DP_PIX_WIDTH, pATIHW->dp_pix_width);
+        outf(DP_MIX, pATIHW->dp_mix);
+        outf(DP_SRC, pATIHW->dp_src);
+
+        /* Load colour compare registers */
+        ATIMach64WaitForFIFO(pATI, 3);
+        outf(CLR_CMP_CLR, pATIHW->clr_cmp_clr);
+        outf(CLR_CMP_MSK, pATIHW->clr_cmp_msk);
+        outf(CLR_CMP_CNTL, pATIHW->clr_cmp_cntl);
+
+        /* Load context mask */
+        ATIMach64WaitForFIFO(pATI, 1);
+        outf(CONTEXT_MASK, pATIHW->context_mask);
+
+        ATIMach64WaitForIdle(pATI);
+
+        if (pATI->OptionMMIOCache)
+        {
+            /*
+             * Enable write caching for selected MMIO registers.  This can only
+             * be done for those registers whose value does not change without
+             * driver intervention.
+             */
+
+            CacheRegister(SRC_CNTL);
+
+            CacheRegister(HOST_CNTL);
+
+            CacheRegister(PAT_REG0);
+            CacheRegister(PAT_REG1);
+            CacheRegister(PAT_CNTL);
+
+            CacheRegister(SC_LEFT_RIGHT);
+            CacheRegister(SC_TOP_BOTTOM);
+
+            CacheRegister(DP_BKGD_CLR);
+            CacheRegister(DP_FRGD_CLR);
+            CacheRegister(DP_WRITE_MASK);
+            CacheRegister(DP_MIX);
+
+            CacheRegister(CLR_CMP_CLR);
+            CacheRegister(CLR_CMP_MSK);
+            CacheRegister(CLR_CMP_CNTL);
+        }
+    }
+
+    /* Aperture setup */
+    outr(MEM_VGA_WP_SEL, pATIHW->mem_vga_wp_sel);
+    outr(MEM_VGA_RP_SEL, pATIHW->mem_vga_rp_sel);
+
+    outr(DAC_CNTL, pATIHW->dac_cntl);
+
+    outr(CONFIG_CNTL, pATIHW->config_cntl);
+    outr(BUS_CNTL, pATIHW->bus_cntl);
+
+    if (pATI->Chip >= ATI_CHIP_264VTB)
+    {
+        outr(MEM_CNTL, pATIHW->mem_cntl);
+        outr(MPP_CONFIG, pATIHW->mpp_config);
+        outr(MPP_STROBE_SEQ, pATIHW->mpp_strobe_seq);
+        outr(TVO_CNTL, pATIHW->tvo_cntl);
+    }
+}
+
+/*
+ * ATIMach64SaveScreen --
+ *
+ * This function blanks or unblanks a Mach64 screen.
+ */
+void
+ATIMach64SaveScreen
+(
+    ATIPtr pATI,
+    int    Mode
+)
+{
+    CARD32 crtc_gen_cntl = inr(CRTC_GEN_CNTL);
+
+    switch (Mode)
+    {
+        case SCREEN_SAVER_OFF:
+        case SCREEN_SAVER_FORCER:
+            outr(CRTC_GEN_CNTL, crtc_gen_cntl & ~CRTC_DISPLAY_DIS);
+            break;
+
+        case SCREEN_SAVER_ON:
+        case SCREEN_SAVER_CYCLE:
+            outr(CRTC_GEN_CNTL, crtc_gen_cntl | CRTC_DISPLAY_DIS);
+            break;
+
+        default:
+            break;
+    }
+}
+
+/*
+ * ATIMach64SetDPMSMode --
+ *
+ * This function sets a Mach64's VESA Display Power Management Signaling mode.
+ */
+void
+ATIMach64SetDPMSMode
+(
+    ScrnInfoPtr pScreenInfo,
+    ATIPtr      pATI,
+    int         DPMSMode
+)
+{
+    CARD32 crtc_gen_cntl =
+        inr(CRTC_GEN_CNTL) & ~(CRTC_HSYNC_DIS | CRTC_VSYNC_DIS);
+
+    switch (DPMSMode)
+    {
+        case DPMSModeOn:        /* HSync on, VSync on */
+            break;
+
+        case DPMSModeStandby:   /* HSync off, VSync on */
+            crtc_gen_cntl |= CRTC_HSYNC_DIS;
+            break;
+
+        case DPMSModeSuspend:   /* HSync on, VSync off */
+            crtc_gen_cntl |= CRTC_VSYNC_DIS;
+            break;
+
+        case DPMSModeOff:       /* HSync off, VSync off */
+            crtc_gen_cntl |= CRTC_HSYNC_DIS | CRTC_VSYNC_DIS;
+            break;
+
+        default:                /* Muffle compiler */
+            return;
+    }
+
+    if (pATI->pXAAInfo && pATI->pXAAInfo->NeedToSync)
+        (*pATI->pXAAInfo->Sync)(pScreenInfo);
+
+    outr(CRTC_GEN_CNTL, crtc_gen_cntl);
+
+    if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0))
+    {
+        CARD32 lcd_index = 0;
+
+        /*
+         * ATI's BIOS simply turns the panel on and off, so do the same by
+         * default, but keep the previous behaviour around for reference.
+         */
+        if (pATI->OptionDevel)
+        {
+            CARD32 power_management;
+
+            if (pATI->Chip == ATI_CHIP_264LT)
+                power_management = inr(POWER_MANAGEMENT);
+            else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
+                        (pATI->Chip == ATI_CHIP_264XL) ||
+                        (pATI->Chip == ATI_CHIP_MOBILITY)) */
+            {
+                lcd_index = inr(LCD_INDEX);
+                power_management = ATIGetMach64LCDReg(LCD_POWER_MANAGEMENT);
+            }
+
+            power_management &= ~(STANDBY_NOW | SUSPEND_NOW);
+
+            switch (DPMSMode)
+            {
+                case DPMSModeOn:
+                    break;
+
+                case DPMSModeStandby:
+                    power_management |= STANDBY_NOW;
+                    break;
+
+                case DPMSModeSuspend:
+                    power_management |= SUSPEND_NOW;
+                    break;
+
+                case DPMSModeOff:
+                    power_management |= STANDBY_NOW | SUSPEND_NOW;  /* ? */
+                    break;
+
+                default:        /* Muffle compiler */
+                    return;
+            }
+
+            if (pATI->Chip == ATI_CHIP_264LT)
+                outr(POWER_MANAGEMENT, power_management);
+            else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
+                        (pATI->Chip == ATI_CHIP_264XL) ||
+                        (pATI->Chip == ATI_CHIP_MOBILITY)) */
+            {
+                ATIPutMach64LCDReg(LCD_POWER_MANAGEMENT, power_management);
+                outr(LCD_INDEX, lcd_index);
+            }
+        }
+        else
+        {
+            CARD32 lcd_gen_ctrl;
+
+            if (pATI->Chip == ATI_CHIP_264LT)
+                lcd_gen_ctrl = inr(LCD_GEN_CTRL);
+            else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
+                        (pATI->Chip == ATI_CHIP_264XL) ||
+                        (pATI->Chip == ATI_CHIP_MOBILITY)) */
+            {
+                lcd_index = inr(LCD_INDEX);
+                lcd_gen_ctrl = ATIGetMach64LCDReg(LCD_GEN_CNTL);
+            }
+
+            if (DPMSMode == DPMSModeOn)
+                lcd_gen_ctrl |= LCD_ON;
+            else
+                lcd_gen_ctrl &= ~LCD_ON;
+
+            if (pATI->Chip == ATI_CHIP_264LT)
+                outr(LCD_GEN_CTRL, lcd_gen_ctrl);
+            else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
+                        (pATI->Chip == ATI_CHIP_264XL) ||
+                        (pATI->Chip == ATI_CHIP_MOBILITY)) */
+            {
+                ATIPutMach64LCDReg(LCD_GEN_CNTL, lcd_gen_ctrl);
+                outr(LCD_INDEX, lcd_index);
+            }
+        }
+    }
+}
+
+/*
+ * ATIMach64ValidateClip --
+ *
+ * This function ensures the current scissor settings do not interfere with
+ * the current draw request.
+ */
+static void
+ATIMach64ValidateClip
+(
+    ATIPtr pATI,
+    int    sc_left,
+    int    sc_right,
+    int    sc_top,
+    int    sc_bottom
+)
+{
+    if ((sc_left < (int)pATI->sc_left) || (sc_right > (int)pATI->sc_right))
+    {
+        outf(SC_LEFT_RIGHT, pATI->sc_left_right);
+        pATI->sc_left = pATI->NewHW.sc_left;
+        pATI->sc_right = pATI->NewHW.sc_right;
+    }
+
+    if ((sc_top < (int)pATI->sc_top) || (sc_bottom > (int)pATI->sc_bottom))
+    {
+        outf(SC_TOP_BOTTOM, pATI->sc_top_bottom);
+        pATI->sc_top = pATI->NewHW.sc_top;
+        pATI->sc_bottom = pATI->NewHW.sc_bottom;
+    }
+}
+
+/*
+ * ATIMach64Sync --
+ *
+ * This is called to wait for the draw engine to become idle.
+ */
+static void
+ATIMach64Sync
+(
+    ScrnInfoPtr pScreenInfo
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    ATIMach64WaitForIdle(pATI);
+
+    if (pATI->OptionMMIOCache)
+    {
+        /*
+         * For debugging purposes, attempt to verify that each cached register
+         * should actually be cached.
+         */
+        if (RegisterIsCached(SRC_CNTL) &&
+            (CacheSlot(SRC_CNTL) != inm(SRC_CNTL)))
+        {
+            UncacheRegister(SRC_CNTL);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "SRC_CNTL write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(HOST_CNTL) &&
+            (CacheSlot(HOST_CNTL) != inm(HOST_CNTL)))
+        {
+            UncacheRegister(HOST_CNTL);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "HOST_CNTL write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(PAT_REG0) &&
+            (CacheSlot(PAT_REG0) != inm(PAT_REG0)))
+        {
+            UncacheRegister(PAT_REG0);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "PAT_REG0 write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(PAT_REG1) &&
+            (CacheSlot(PAT_REG1) != inm(PAT_REG1)))
+        {
+            UncacheRegister(PAT_REG1);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "PAT_REG1 write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(PAT_CNTL) &&
+            (CacheSlot(PAT_CNTL) != inm(PAT_CNTL)))
+        {
+            UncacheRegister(PAT_CNTL);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "PAT_CNTL write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(SC_LEFT_RIGHT) &&
+            (CacheSlot(SC_LEFT_RIGHT) !=
+             (SetWord(inm(SC_RIGHT), 1) | SetWord(inm(SC_LEFT), 0))))
+        {
+            UncacheRegister(SC_LEFT_RIGHT);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "SC_LEFT_RIGHT write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(SC_TOP_BOTTOM) &&
+            (CacheSlot(SC_TOP_BOTTOM) !=
+             (SetWord(inm(SC_BOTTOM), 1) | SetWord(inm(SC_TOP), 0))))
+        {
+            UncacheRegister(SC_TOP_BOTTOM);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "SC_TOP_BOTTOM write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(DP_BKGD_CLR) &&
+            (CacheSlot(DP_BKGD_CLR) != inm(DP_BKGD_CLR)))
+        {
+            UncacheRegister(DP_BKGD_CLR);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "DP_BKGD_CLR write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(DP_FRGD_CLR) &&
+            (CacheSlot(DP_FRGD_CLR) != inm(DP_FRGD_CLR)))
+        {
+            UncacheRegister(DP_FRGD_CLR);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "DP_FRGD_CLR write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(DP_WRITE_MASK) &&
+            (CacheSlot(DP_WRITE_MASK) != inm(DP_WRITE_MASK)))
+        {
+            UncacheRegister(DP_WRITE_MASK);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "DP_WRITE_MASK write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(DP_MIX) &&
+            (CacheSlot(DP_MIX) != inm(DP_MIX)))
+        {
+            UncacheRegister(DP_MIX);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "DP_MIX write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(CLR_CMP_CLR) &&
+            (CacheSlot(CLR_CMP_CLR) != inm(CLR_CMP_CLR)))
+        {
+            UncacheRegister(CLR_CMP_CLR);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "CLR_CMP_CLR write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(CLR_CMP_MSK) &&
+            (CacheSlot(CLR_CMP_MSK) != inm(CLR_CMP_MSK)))
+        {
+            UncacheRegister(CLR_CMP_MSK);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "CLR_CMP_MSK write cache disabled!\n");
+        }
+
+        if (RegisterIsCached(CLR_CMP_CNTL) &&
+            (CacheSlot(CLR_CMP_CNTL) != inm(CLR_CMP_CNTL)))
+        {
+            UncacheRegister(CLR_CMP_CNTL);
+            xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+                "CLR_CMP_CNTL write cache disabled!\n");
+        }
+    }
+
+    /*
+     * For VTB's and later, the first CPU read of the framebuffer will return
+     * zeroes, so do it here.  This appears to be due to some kind of engine
+     * caching of framebuffer data I haven't found any way of disabling, or
+     * otherwise circumventing.  Thanks to Mark Vojkovich for the suggestion.
+     */
+    pATI->pXAAInfo->NeedToSync = FALSE;
+    pATI = *(volatile ATIPtr *)pATI->pMemory;
+}
+
+/*
+ * ATIMach64SetupForScreenToScreenCopy --
+ *
+ * This function sets up the draw engine for a series of screen-to-screen copy
+ * operations.
+ */
+static void
+ATIMach64SetupForScreenToScreenCopy
+(
+    ScrnInfoPtr  pScreenInfo,
+    int          xdir,
+    int          ydir,
+    int          rop,
+    unsigned int planemask,
+    int          TransparencyColour
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    ATIMach64WaitForFIFO(pATI, 3);
+    outf(DP_WRITE_MASK, planemask);
+    outf(DP_SRC, DP_MONO_SRC_ALLONES |
+        SetBits(SRC_BLIT, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC));
+    outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX));
+
+#ifdef AVOID_DGA
+
+    if (TransparencyColour == -1)
+
+#else /* AVOID_DGA */
+
+    if (!pATI->XAAForceTransBlit && (TransparencyColour == -1))
+
+#endif /* AVOID_DGA */
+
+        outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE);
+    else
+    {
+        ATIMach64WaitForFIFO(pATI, 2);
+        outf(CLR_CMP_CLR, TransparencyColour);
+        outf(CLR_CMP_CNTL, CLR_CMP_FN_EQUAL | CLR_CMP_SRC_2D);
+    }
+
+    pATI->dst_cntl = 0;
+
+    if (ydir > 0)
+        pATI->dst_cntl |= DST_Y_DIR;
+    if (xdir > 0)
+        pATI->dst_cntl |= DST_X_DIR;
+
+    if (pATI->XModifier == 1)
+        outf(DST_CNTL, pATI->dst_cntl);
+    else
+        pATI->dst_cntl |= DST_24_ROT_EN;
+}
+
+/*
+ * ATIMach64SubsequentScreenToScreenCopy --
+ *
+ * This function performs a screen-to-screen copy operation.
+ */
+static void
+ATIMach64SubsequentScreenToScreenCopy
+(
+    ScrnInfoPtr pScreenInfo,
+    int         xSrc,
+    int         ySrc,
+    int         xDst,
+    int         yDst,
+    int         w,
+    int         h
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    xSrc *= pATI->XModifier;
+    xDst *= pATI->XModifier;
+    w    *= pATI->XModifier;
+
+    /* Disable clipping if it gets in the way */
+    ATIMach64ValidateClip(pATI, xDst, xDst + w - 1, yDst, yDst + h - 1);
+
+    if (!(pATI->dst_cntl & DST_X_DIR))
+    {
+        xSrc += w - 1;
+        xDst += w - 1;
+    }
+
+    if (!(pATI->dst_cntl & DST_Y_DIR))
+    {
+        ySrc += h - 1;
+        yDst += h - 1;
+    }
+
+    if (pATI->XModifier != 1)
+        outf(DST_CNTL, pATI->dst_cntl | SetBits((xDst / 4) % 6, DST_24_ROT));
+
+    ATIMach64WaitForFIFO(pATI, 4);
+    outf(SRC_Y_X, SetWord(xSrc, 1) | SetWord(ySrc, 0));
+    outf(SRC_WIDTH1, w);
+    outf(DST_Y_X, SetWord(xDst, 1) | SetWord(yDst, 0));
+    outf(DST_HEIGHT_WIDTH, SetWord(w, 1) | SetWord(h, 0));
+}
+
+/*
+ * ATIMach64SetupForSolidFill --
+ *
+ * This function sets up the draw engine for a series of solid fills.
+ */
+static void
+ATIMach64SetupForSolidFill
+(
+    ScrnInfoPtr  pScreenInfo,
+    int          colour,
+    int          rop,
+    unsigned int planemask
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    ATIMach64WaitForFIFO(pATI, 5);
+    outf(DP_WRITE_MASK, planemask);
+    outf(DP_SRC, DP_MONO_SRC_ALLONES |
+        SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC));
+    outf(DP_FRGD_CLR, colour);
+    outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX));
+
+    outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE);
+
+    if (pATI->XModifier == 1)
+        outf(DST_CNTL, DST_X_DIR | DST_Y_DIR);
+}
+
+/*
+ * ATIMach64SubsequentSolidFillRect --
+ *
+ * This function performs a solid rectangle fill.
+ */
+static void
+ATIMach64SubsequentSolidFillRect
+(
+    ScrnInfoPtr pScreenInfo,
+    int         x,
+    int         y,
+    int         w,
+    int         h
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    if (pATI->XModifier != 1)
+    {
+        x *= pATI->XModifier;
+        w *= pATI->XModifier;
+
+        outf(DST_CNTL, SetBits((x / 4) % 6, DST_24_ROT) |
+            (DST_X_DIR | DST_Y_DIR | DST_24_ROT_EN));
+    }
+
+    /* Disable clipping if it gets in the way */
+    ATIMach64ValidateClip(pATI, x, x + w - 1, y, y + h - 1);
+
+    ATIMach64WaitForFIFO(pATI, 2);
+    outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0));
+    outf(DST_HEIGHT_WIDTH, SetWord(w, 1) | SetWord(h, 0));
+}
+
+/*
+ * ATIMach64SetupForSolidLine --
+ *
+ * This function sets up the draw engine for a series of solid lines.  It is
+ * not used for 24bpp because the engine doesn't support it.
+ */
+static void
+ATIMach64SetupForSolidLine
+(
+    ScrnInfoPtr  pScreenInfo,
+    int          colour,
+    int          rop,
+    unsigned int planemask
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    ATIMach64WaitForFIFO(pATI, 5);
+    outf(DP_WRITE_MASK, planemask);
+    outf(DP_SRC, DP_MONO_SRC_ALLONES |
+        SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC));
+    outf(DP_FRGD_CLR, colour);
+    outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX));
+
+    outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE);
+
+    ATIMach64ValidateClip(pATI, pATI->NewHW.sc_left, pATI->NewHW.sc_right,
+        pATI->NewHW.sc_top, pATI->NewHW.sc_bottom);
+}
+
+/*
+ * ATIMach64SubsequentSolidHorVertLine --
+ *
+ * This is called to draw a solid horizontal or vertical line.  This does a
+ * one-pixel wide solid fill.
+ */
+static void
+ATIMach64SubsequentSolidHorVertLine
+(
+    ScrnInfoPtr pScreenInfo,
+    int         x,
+    int         y,
+    int         len,
+    int         dir
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    ATIMach64WaitForFIFO(pATI, 3);
+    outf(DST_CNTL, DST_X_DIR | DST_Y_DIR);
+    outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0));
+
+    if (dir == DEGREES_0)
+        outf(DST_HEIGHT_WIDTH, SetWord(len, 1) | SetWord(1, 0));
+    else /* if (dir == DEGREES_270) */
+        outf(DST_HEIGHT_WIDTH, SetWord(1, 1) | SetWord(len, 0));
+}
+
+/*
+ * ATIMach64SubsequentSolidBresenhamLine --
+ *
+ * This function draws a line using the Bresenham line engine.
+ */
+static void
+ATIMach64SubsequentSolidBresenhamLine
+(
+    ScrnInfoPtr pScreenInfo,
+    int         x,
+    int         y,
+    int         major,
+    int         minor,
+    int         err,
+    int         len,
+    int         octant
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+    CARD32 dst_cntl = DST_LAST_PEL;
+
+    if (octant & YMAJOR)
+        dst_cntl |= DST_Y_MAJOR;
+
+    if (!(octant & XDECREASING))
+        dst_cntl |= DST_X_DIR;
+
+    if (!(octant & YDECREASING))
+        dst_cntl |= DST_Y_DIR;
+
+    ATIMach64WaitForFIFO(pATI, 6);
+    outf(DST_CNTL, dst_cntl);
+    outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0));
+    outf(DST_BRES_ERR, minor + err);
+    outf(DST_BRES_INC, minor);
+    outf(DST_BRES_DEC, minor - major);
+    outf(DST_BRES_LNTH, len);
+}
+
+/*
+ * ATIMach64SetupForMono8x8PatternFill --
+ *
+ * This function sets up the draw engine for a series of 8x8 1bpp pattern
+ * fills.
+ */
+static void
+ATIMach64SetupForMono8x8PatternFill
+(
+    ScrnInfoPtr  pScreenInfo,
+    int          patx,
+    int          paty,
+    int          fg,
+    int          bg,
+    int          rop,
+    unsigned int planemask
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    ATIMach64WaitForFIFO(pATI, 3);
+    outf(DP_WRITE_MASK, planemask);
+    outf(DP_SRC, DP_MONO_SRC_PATTERN |
+        SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC));
+    outf(DP_FRGD_CLR, fg);
+
+    if (bg == -1)
+        outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) |
+            SetBits(MIX_DST, DP_BKGD_MIX));
+    else
+    {
+        ATIMach64WaitForFIFO(pATI, 2);
+        outf(DP_BKGD_CLR, bg);
+        outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) |
+            SetBits(ATIMach64ALU[rop], DP_BKGD_MIX));
+    }
+
+    ATIMach64WaitForFIFO(pATI, 4);
+    outf(PAT_REG0, patx);
+    outf(PAT_REG1, paty);
+    outf(PAT_CNTL, PAT_MONO_EN);
+
+    outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE);
+
+    if (pATI->XModifier == 1)
+        outf(DST_CNTL, DST_X_DIR | DST_Y_DIR);
+}
+
+/*
+ * ATIMach64SubsequentMono8x8PatternFillRect --
+ *
+ * This function performs an 8x8 1bpp pattern fill.
+ */
+static void
+ATIMach64SubsequentMono8x8PatternFillRect
+(
+    ScrnInfoPtr pScreenInfo,
+    int         patx,
+    int         paty,
+    int         x,
+    int         y,
+    int         w,
+    int         h
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    if (pATI->XModifier != 1)
+    {
+        x *= pATI->XModifier;
+        w *= pATI->XModifier;
+
+        outf(DST_CNTL, SetBits((x / 4) % 6, DST_24_ROT) |
+            (DST_X_DIR | DST_Y_DIR | DST_24_ROT_EN));
+    }
+
+    /* Disable clipping if it gets in the way */
+    ATIMach64ValidateClip(pATI, x, x + w - 1, y, y + h - 1);
+
+    ATIMach64WaitForFIFO(pATI, 2);
+    outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0));
+    outf(DST_HEIGHT_WIDTH, SetWord(w, 1) | SetWord(h, 0));
+}
+
+/*
+ * ATIMach64SetupForScanlineCPUToScreenColorExpandFill --
+ *
+ * This function sets up the engine for a series of colour expansion fills.
+ */
+static void
+ATIMach64SetupForScanlineCPUToScreenColorExpandFill
+(
+    ScrnInfoPtr  pScreenInfo,
+    int          fg,
+    int          bg,
+    int          rop,
+    unsigned int planemask
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    ATIMach64WaitForFIFO(pATI, 3);
+    outf(DP_WRITE_MASK, planemask);
+    outf(DP_SRC, DP_MONO_SRC_HOST |
+        SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC));
+    outf(DP_FRGD_CLR, fg);
+
+    if (bg == -1)
+        outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) |
+            SetBits(MIX_DST, DP_BKGD_MIX));
+    else
+    {
+        ATIMach64WaitForFIFO(pATI, 2);
+        outf(DP_BKGD_CLR, bg);
+        outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) |
+            SetBits(ATIMach64ALU[rop], DP_BKGD_MIX));
+    }
+
+    outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE);
+
+    if (pATI->XModifier == 1)
+        outf(DST_CNTL, DST_X_DIR | DST_Y_DIR);
+}
+
+/*
+ * ATIMach64SubsequentScanlineCPUToScreenColorExpandFill --
+ *
+ * This function sets up the engine for a single colour expansion fill.
+ */
+static void
+ATIMach64SubsequentScanlineCPUToScreenColorExpandFill
+(
+    ScrnInfoPtr pScreenInfo,
+    int         x,
+    int         y,
+    int         w,
+    int         h,
+    int         skipleft
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    if (pATI->XModifier != 1)
+    {
+        x *= pATI->XModifier;
+        w *= pATI->XModifier;
+        skipleft *= pATI->XModifier;
+
+        outf(DST_CNTL, SetBits((x / 4) % 6, DST_24_ROT) |
+            (DST_X_DIR | DST_Y_DIR | DST_24_ROT_EN));
+    }
+
+    pATI->ExpansionBitmapWidth = (w + 31) / 32;
+
+    ATIMach64WaitForFIFO(pATI, 3);
+    pATI->sc_left = x + skipleft;
+    pATI->sc_right = x + w - 1;
+    outf(SC_LEFT_RIGHT,
+        SetWord(pATI->sc_right, 1) | SetWord(pATI->sc_left, 0));
+    outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0));
+    outf(DST_HEIGHT_WIDTH,
+        SetWord(pATI->ExpansionBitmapWidth * 32, 1) | SetWord(h, 0));
+}
+
+/*
+ * ATIMach64SubsequentColorExpandScanline --
+ *
+ * This function feeds a bitmap scanline to the engine for a colour expansion
+ * fill.  This is written to do burst transfers for those platforms that can do
+ * them, and to improve CPU/engine concurrency.
+ */
+static void
+ATIMach64SubsequentColorExpandScanline
+(
+    ScrnInfoPtr pScreenInfo,
+    int         iBuffer
+)
+{
+    ATIPtr          pATI         = ATIPTR(pScreenInfo);
+    CARD32          *pBitmapData = pATI->ExpansionBitmapScanlinePtr[iBuffer];
+    int             w            = pATI->ExpansionBitmapWidth;
+    int             nDWord;
+
+    while (w > 0)
+    {
+        /*
+         * Transfers are done in chunks of up to 64 bytes in length (32 on
+         * earlier controllers).
+         */
+        nDWord = w;
+        if (nDWord > pATI->nHostFIFOEntries)
+            nDWord = pATI->nHostFIFOEntries;
+
+        /* Make enough FIFO slots available */
+        ATIMach64WaitForFIFO(pATI, nDWord);
+
+        /*
+         * Always start transfers on a chuck-sized boundary.  Note that
+         * HOST_DATA_0 is actually on a 512-byte boundary, but *pBitmapData can
+         * only be guaranteed to be on a chunk-sized boundary.
+         *
+         * Transfer current chunk.  With any luck, the compiler won't mangle
+         * this too badly...
+         */
+
+#       if defined(ATIMove32)
+
+            ATIMove32(pATI->pHOST_DATA, pBitmapData, nDWord);
+
+#       else
+
+        {
+            volatile CARD32 *pDst;
+            CARD32          *pSrc;
+            unsigned int    iDWord;
+
+            iDWord = 16 - nDWord;
+            pDst = (volatile CARD32 *)pATI->pHOST_DATA - iDWord;
+            pSrc = pBitmapData - iDWord;
+
+            switch (iDWord)
+            {
+                case  0:  MMIO_MOVE32(pDst +  0, 0, *(pSrc +  0));
+                case  1:  MMIO_MOVE32(pDst +  1, 0, *(pSrc +  1));
+                case  2:  MMIO_MOVE32(pDst +  2, 0, *(pSrc +  2));
+                case  3:  MMIO_MOVE32(pDst +  3, 0, *(pSrc +  3));
+                case  4:  MMIO_MOVE32(pDst +  4, 0, *(pSrc +  4));
+                case  5:  MMIO_MOVE32(pDst +  5, 0, *(pSrc +  5));
+                case  6:  MMIO_MOVE32(pDst +  6, 0, *(pSrc +  6));
+                case  7:  MMIO_MOVE32(pDst +  7, 0, *(pSrc +  7));
+                case  8:  MMIO_MOVE32(pDst +  8, 0, *(pSrc +  8));
+                case  9:  MMIO_MOVE32(pDst +  9, 0, *(pSrc +  9));
+                case 10:  MMIO_MOVE32(pDst + 10, 0, *(pSrc + 10));
+                case 11:  MMIO_MOVE32(pDst + 11, 0, *(pSrc + 11));
+                case 12:  MMIO_MOVE32(pDst + 12, 0, *(pSrc + 12));
+                case 13:  MMIO_MOVE32(pDst + 13, 0, *(pSrc + 13));
+                case 14:  MMIO_MOVE32(pDst + 14, 0, *(pSrc + 14));
+                case 15:  MMIO_MOVE32(pDst + 15, 0, *(pSrc + 15));
+
+                default:    /* Muffle compiler */
+                    break;
+            }
+        }
+
+#       endif
+
+        /* Step to next chunk */
+        pBitmapData += nDWord;
+        w -= nDWord;
+        pATI->nAvailableFIFOEntries -= nDWord;
+    }
+
+    pATI->EngineIsBusy = TRUE;
+}
+
+/*
+ * ATIMach64AccelInit --
+ *
+ * This function fills in structure fields needed for acceleration on Mach64
+ * variants.
+ */
+int
+ATIMach64AccelInit
+(
+    ATIPtr        pATI,
+    XAAInfoRecPtr pXAAInfo
+)
+{
+    /* This doesn't seem quite right... */
+    if (pATI->XModifier == 1)
+    {
+        pXAAInfo->Flags = PIXMAP_CACHE | OFFSCREEN_PIXMAPS;
+
+#ifndef AVOID_CPIO
+
+        if (!pATI->BankInfo.BankSize)
+
+#endif /* AVOID_CPIO */
+
+        {
+            pXAAInfo->Flags |= LINEAR_FRAMEBUFFER;
+        }
+    }
+
+    /* Sync */
+    pXAAInfo->Sync = ATIMach64Sync;
+
+    /* Screen-to-screen copy */
+    pXAAInfo->SetupForScreenToScreenCopy = ATIMach64SetupForScreenToScreenCopy;
+    pXAAInfo->SubsequentScreenToScreenCopy =
+        ATIMach64SubsequentScreenToScreenCopy;
+
+    /* Solid fills */
+    pXAAInfo->SetupForSolidFill = ATIMach64SetupForSolidFill;
+    pXAAInfo->SubsequentSolidFillRect = ATIMach64SubsequentSolidFillRect;
+
+    /* 8x8 mono pattern fills */
+    pXAAInfo->Mono8x8PatternFillFlags =
+
+#if X_BYTE_ORDER != X_LITTLE_ENDIAN
+
+        BIT_ORDER_IN_BYTE_MSBFIRST |
+
+#endif /* X_BYTE_ORDER */
+
+        HARDWARE_PATTERN_PROGRAMMED_BITS | HARDWARE_PATTERN_SCREEN_ORIGIN;
+    pXAAInfo->SetupForMono8x8PatternFill = ATIMach64SetupForMono8x8PatternFill;
+    pXAAInfo->SubsequentMono8x8PatternFillRect =
+        ATIMach64SubsequentMono8x8PatternFillRect;
+
+    /*
+     * Use scanline version of colour expansion, not only for the non-ix86
+     * case, but also to avoid PCI retries.
+     */
+    pXAAInfo->ScanlineCPUToScreenColorExpandFillFlags =
+        LEFT_EDGE_CLIPPING | LEFT_EDGE_CLIPPING_NEGATIVE_X |
+        CPU_TRANSFER_PAD_DWORD | SCANLINE_PAD_DWORD;
+    if (pATI->XModifier != 1)
+        pXAAInfo->ScanlineCPUToScreenColorExpandFillFlags |= TRIPLE_BITS_24BPP;
+    pXAAInfo->NumScanlineColorExpandBuffers = 1;
+
+    /* Align bitmap data on a 64-byte boundary */
+    pATI->ExpansionBitmapWidth =        /* DWord size in bits */
+        ((pATI->displayWidth * pATI->XModifier) + 31) & ~31U;
+    pATI->ExpansionBitmapScanlinePtr[1] =
+        (CARD32 *)xnfalloc((pATI->ExpansionBitmapWidth >> 3) + 63);
+    pATI->ExpansionBitmapScanlinePtr[0] =
+        (pointer)(((unsigned long)pATI->ExpansionBitmapScanlinePtr[1] + 63) &
+                  ~63UL);
+    pXAAInfo->ScanlineColorExpandBuffers =
+        (CARD8 **)pATI->ExpansionBitmapScanlinePtr;
+    pXAAInfo->SetupForScanlineCPUToScreenColorExpandFill =
+        ATIMach64SetupForScanlineCPUToScreenColorExpandFill;
+    pXAAInfo->SubsequentScanlineCPUToScreenColorExpandFill =
+        ATIMach64SubsequentScanlineCPUToScreenColorExpandFill;
+    pXAAInfo->SubsequentColorExpandScanline =
+        ATIMach64SubsequentColorExpandScanline;
+
+    /* The engine does not support the following primitives for 24bpp */
+    if (pATI->XModifier != 1)
+        return ATIMach64MaxY;
+
+    /* Solid lines */
+    pXAAInfo->SetupForSolidLine = ATIMach64SetupForSolidLine;
+    pXAAInfo->SubsequentSolidHorVertLine = ATIMach64SubsequentSolidHorVertLine;
+    pXAAInfo->SubsequentSolidBresenhamLine =
+        ATIMach64SubsequentSolidBresenhamLine;
+
+    return ATIMach64MaxY;
+}
+
+/*
+ * ATIMach64SetCursorColours --
+ *
+ * Set hardware cursor foreground and background colours.
+ */
+static void
+ATIMach64SetCursorColours
+(
+    ScrnInfoPtr pScreenInfo,
+    int         fg,
+    int         bg
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    outr(CUR_CLR0, SetBits(fg, CUR_CLR));
+    outr(CUR_CLR1, SetBits(bg, CUR_CLR));
+}
+
+/*
+ * ATIMach64SetCursorPosition --
+ *
+ * Set position of hardware cursor.
+ */
+static void
+ATIMach64SetCursorPosition
+(
+    ScrnInfoPtr pScreenInfo,
+    int         x,
+    int         y
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+    CARD16 CursorXOffset, CursorYOffset;
+
+    /* Adjust x & y when the cursor is partially obscured */
+    if (x < 0)
+    {
+        if ((CursorXOffset = -x) > 63)
+            CursorXOffset = 63;
+        x = 0;
+    }
+    else
+    {
+        CursorXOffset = pScreenInfo->frameX1 - pScreenInfo->frameX0;
+        if (x > CursorXOffset)
+            x = CursorXOffset;
+        CursorXOffset = 0;
+    }
+
+    if (y < 0)
+    {
+        if ((CursorYOffset = -y) > 63)
+            CursorYOffset = 63;
+        y = 0;
+    }
+    else
+    {
+        CursorYOffset = pScreenInfo->frameY1 - pScreenInfo->frameY0;
+        if (y > CursorYOffset)
+            y = CursorYOffset;
+        CursorYOffset = 0;
+    }
+
+    /* Adjust for multiscanned modes */
+    if (pScreenInfo->currentMode->Flags & V_DBLSCAN)
+        y *= 2;
+    if (pScreenInfo->currentMode->VScan > 1)
+        y *= pScreenInfo->currentMode->VScan;
+
+    do
+    {
+        if (CursorYOffset != pATI->CursorYOffset)
+        {
+            pATI->CursorYOffset = CursorYOffset;
+            outr(CUR_OFFSET, ((CursorYOffset << 4) + pATI->CursorOffset) >> 3);
+        }
+        else if (CursorXOffset == pATI->CursorXOffset)
+            break;
+
+        pATI->CursorXOffset = CursorXOffset;
+        outr(CUR_HORZ_VERT_OFF, SetBits(CursorXOffset, CUR_HORZ_OFF) |
+            SetBits(CursorYOffset, CUR_VERT_OFF));
+    } while (0);
+
+    outr(CUR_HORZ_VERT_POSN,
+        SetBits(x, CUR_HORZ_POSN) | SetBits(y, CUR_VERT_POSN));
+}
+
+/*
+ * ATIMach64LoadCursorImage --
+ *
+ * Copy hardware cursor image into offscreen video memory.
+ */
+static void
+ATIMach64LoadCursorImage
+(
+    ScrnInfoPtr pScreenInfo,
+    CARD8       *pImage
+)
+{
+    ATIPtr           pATI     = ATIPTR(pScreenInfo);
+    XAAInfoRecPtr    pXAAInfo = pATI->pXAAInfo;
+    CARD32          *pSrc     = (pointer)pImage;
+    volatile CARD32 *pDst     = pATI->pCursorImage;
+
+    /* Synchronise video memory accesses */
+    if (pXAAInfo && pXAAInfo->NeedToSync)
+        (*pXAAInfo->Sync)(pScreenInfo);
+
+#   if defined(ATIMove32)
+
+        ATIMove32(pDst, pSrc, 256);
+
+#   else
+
+        /* This is lengthy, but it does maximise burst modes */
+        pDst[  0] = pSrc[  0];  pDst[  1] = pSrc[  1];
+        pDst[  2] = pSrc[  2];  pDst[  3] = pSrc[  3];
+        pDst[  4] = pSrc[  4];  pDst[  5] = pSrc[  5];
+        pDst[  6] = pSrc[  6];  pDst[  7] = pSrc[  7];
+        pDst[  8] = pSrc[  8];  pDst[  9] = pSrc[  9];
+        pDst[ 10] = pSrc[ 10];  pDst[ 11] = pSrc[ 11];
+        pDst[ 12] = pSrc[ 12];  pDst[ 13] = pSrc[ 13];
+        pDst[ 14] = pSrc[ 14];  pDst[ 15] = pSrc[ 15];
+        pDst[ 16] = pSrc[ 16];  pDst[ 17] = pSrc[ 17];
+        pDst[ 18] = pSrc[ 18];  pDst[ 19] = pSrc[ 19];
+        pDst[ 20] = pSrc[ 20];  pDst[ 21] = pSrc[ 21];
+        pDst[ 22] = pSrc[ 22];  pDst[ 23] = pSrc[ 23];
+        pDst[ 24] = pSrc[ 24];  pDst[ 25] = pSrc[ 25];
+        pDst[ 26] = pSrc[ 26];  pDst[ 27] = pSrc[ 27];
+        pDst[ 28] = pSrc[ 28];  pDst[ 29] = pSrc[ 29];
+        pDst[ 30] = pSrc[ 30];  pDst[ 31] = pSrc[ 31];
+        pDst[ 32] = pSrc[ 32];  pDst[ 33] = pSrc[ 33];
+        pDst[ 34] = pSrc[ 34];  pDst[ 35] = pSrc[ 35];
+        pDst[ 36] = pSrc[ 36];  pDst[ 37] = pSrc[ 37];
+        pDst[ 38] = pSrc[ 38];  pDst[ 39] = pSrc[ 39];
+        pDst[ 40] = pSrc[ 40];  pDst[ 41] = pSrc[ 41];
+        pDst[ 42] = pSrc[ 42];  pDst[ 43] = pSrc[ 43];
+        pDst[ 44] = pSrc[ 44];  pDst[ 45] = pSrc[ 45];
+        pDst[ 46] = pSrc[ 46];  pDst[ 47] = pSrc[ 47];
+        pDst[ 48] = pSrc[ 48];  pDst[ 49] = pSrc[ 49];
+        pDst[ 50] = pSrc[ 50];  pDst[ 51] = pSrc[ 51];
+        pDst[ 52] = pSrc[ 52];  pDst[ 53] = pSrc[ 53];
+        pDst[ 54] = pSrc[ 54];  pDst[ 55] = pSrc[ 55];
+        pDst[ 56] = pSrc[ 56];  pDst[ 57] = pSrc[ 57];
+        pDst[ 58] = pSrc[ 58];  pDst[ 59] = pSrc[ 59];
+        pDst[ 60] = pSrc[ 60];  pDst[ 61] = pSrc[ 61];
+        pDst[ 62] = pSrc[ 62];  pDst[ 63] = pSrc[ 63];
+        pDst[ 64] = pSrc[ 64];  pDst[ 65] = pSrc[ 65];
+        pDst[ 66] = pSrc[ 66];  pDst[ 67] = pSrc[ 67];
+        pDst[ 68] = pSrc[ 68];  pDst[ 69] = pSrc[ 69];
+        pDst[ 70] = pSrc[ 70];  pDst[ 71] = pSrc[ 71];
+        pDst[ 72] = pSrc[ 72];  pDst[ 73] = pSrc[ 73];
+        pDst[ 74] = pSrc[ 74];  pDst[ 75] = pSrc[ 75];
+        pDst[ 76] = pSrc[ 76];  pDst[ 77] = pSrc[ 77];
+        pDst[ 78] = pSrc[ 78];  pDst[ 79] = pSrc[ 79];
+        pDst[ 80] = pSrc[ 80];  pDst[ 81] = pSrc[ 81];
+        pDst[ 82] = pSrc[ 82];  pDst[ 83] = pSrc[ 83];
+        pDst[ 84] = pSrc[ 84];  pDst[ 85] = pSrc[ 85];
+        pDst[ 86] = pSrc[ 86];  pDst[ 87] = pSrc[ 87];
+        pDst[ 88] = pSrc[ 88];  pDst[ 89] = pSrc[ 89];
+        pDst[ 90] = pSrc[ 90];  pDst[ 91] = pSrc[ 91];
+        pDst[ 92] = pSrc[ 92];  pDst[ 93] = pSrc[ 93];
+        pDst[ 94] = pSrc[ 94];  pDst[ 95] = pSrc[ 95];
+        pDst[ 96] = pSrc[ 96];  pDst[ 97] = pSrc[ 97];
+        pDst[ 98] = pSrc[ 98];  pDst[ 99] = pSrc[ 99];
+        pDst[100] = pSrc[100];  pDst[101] = pSrc[101];
+        pDst[102] = pSrc[102];  pDst[103] = pSrc[103];
+        pDst[104] = pSrc[104];  pDst[105] = pSrc[105];
+        pDst[106] = pSrc[106];  pDst[107] = pSrc[107];
+        pDst[108] = pSrc[108];  pDst[109] = pSrc[109];
+        pDst[110] = pSrc[110];  pDst[111] = pSrc[111];
+        pDst[112] = pSrc[112];  pDst[113] = pSrc[113];
+        pDst[114] = pSrc[114];  pDst[115] = pSrc[115];
+        pDst[116] = pSrc[116];  pDst[117] = pSrc[117];
+        pDst[118] = pSrc[118];  pDst[119] = pSrc[119];
+        pDst[120] = pSrc[120];  pDst[121] = pSrc[121];
+        pDst[122] = pSrc[122];  pDst[123] = pSrc[123];
+        pDst[124] = pSrc[124];  pDst[125] = pSrc[125];
+        pDst[126] = pSrc[126];  pDst[127] = pSrc[127];
+        pDst[128] = pSrc[128];  pDst[129] = pSrc[129];
+        pDst[130] = pSrc[130];  pDst[131] = pSrc[131];
+        pDst[132] = pSrc[132];  pDst[133] = pSrc[133];
+        pDst[134] = pSrc[134];  pDst[135] = pSrc[135];
+        pDst[136] = pSrc[136];  pDst[137] = pSrc[137];
+        pDst[138] = pSrc[138];  pDst[139] = pSrc[139];
+        pDst[140] = pSrc[140];  pDst[141] = pSrc[141];
+        pDst[142] = pSrc[142];  pDst[143] = pSrc[143];
+        pDst[144] = pSrc[144];  pDst[145] = pSrc[145];
+        pDst[146] = pSrc[146];  pDst[147] = pSrc[147];
+        pDst[148] = pSrc[148];  pDst[149] = pSrc[149];
+        pDst[150] = pSrc[150];  pDst[151] = pSrc[151];
+        pDst[152] = pSrc[152];  pDst[153] = pSrc[153];
+        pDst[154] = pSrc[154];  pDst[155] = pSrc[155];
+        pDst[156] = pSrc[156];  pDst[157] = pSrc[157];
+        pDst[158] = pSrc[158];  pDst[159] = pSrc[159];
+        pDst[160] = pSrc[160];  pDst[161] = pSrc[161];
+        pDst[162] = pSrc[162];  pDst[163] = pSrc[163];
+        pDst[164] = pSrc[164];  pDst[165] = pSrc[165];
+        pDst[166] = pSrc[166];  pDst[167] = pSrc[167];
+        pDst[168] = pSrc[168];  pDst[169] = pSrc[169];
+        pDst[170] = pSrc[170];  pDst[171] = pSrc[171];
+        pDst[172] = pSrc[172];  pDst[173] = pSrc[173];
+        pDst[174] = pSrc[174];  pDst[175] = pSrc[175];
+        pDst[176] = pSrc[176];  pDst[177] = pSrc[177];
+        pDst[178] = pSrc[178];  pDst[179] = pSrc[179];
+        pDst[180] = pSrc[180];  pDst[181] = pSrc[181];
+        pDst[182] = pSrc[182];  pDst[183] = pSrc[183];
+        pDst[184] = pSrc[184];  pDst[185] = pSrc[185];
+        pDst[186] = pSrc[186];  pDst[187] = pSrc[187];
+        pDst[188] = pSrc[188];  pDst[189] = pSrc[189];
+        pDst[190] = pSrc[190];  pDst[191] = pSrc[191];
+        pDst[192] = pSrc[192];  pDst[193] = pSrc[193];
+        pDst[194] = pSrc[194];  pDst[195] = pSrc[195];
+        pDst[196] = pSrc[196];  pDst[197] = pSrc[197];
+        pDst[198] = pSrc[198];  pDst[199] = pSrc[199];
+        pDst[200] = pSrc[200];  pDst[201] = pSrc[201];
+        pDst[202] = pSrc[202];  pDst[203] = pSrc[203];
+        pDst[204] = pSrc[204];  pDst[205] = pSrc[205];
+        pDst[206] = pSrc[206];  pDst[207] = pSrc[207];
+        pDst[208] = pSrc[208];  pDst[209] = pSrc[209];
+        pDst[210] = pSrc[210];  pDst[211] = pSrc[211];
+        pDst[212] = pSrc[212];  pDst[213] = pSrc[213];
+        pDst[214] = pSrc[214];  pDst[215] = pSrc[215];
+        pDst[216] = pSrc[216];  pDst[217] = pSrc[217];
+        pDst[218] = pSrc[218];  pDst[219] = pSrc[219];
+        pDst[220] = pSrc[220];  pDst[221] = pSrc[221];
+        pDst[222] = pSrc[222];  pDst[223] = pSrc[223];
+        pDst[224] = pSrc[224];  pDst[225] = pSrc[225];
+        pDst[226] = pSrc[226];  pDst[227] = pSrc[227];
+        pDst[228] = pSrc[228];  pDst[229] = pSrc[229];
+        pDst[230] = pSrc[230];  pDst[231] = pSrc[231];
+        pDst[232] = pSrc[232];  pDst[233] = pSrc[233];
+        pDst[234] = pSrc[234];  pDst[235] = pSrc[235];
+        pDst[236] = pSrc[236];  pDst[237] = pSrc[237];
+        pDst[238] = pSrc[238];  pDst[239] = pSrc[239];
+        pDst[240] = pSrc[240];  pDst[241] = pSrc[241];
+        pDst[242] = pSrc[242];  pDst[243] = pSrc[243];
+        pDst[244] = pSrc[244];  pDst[245] = pSrc[245];
+        pDst[246] = pSrc[246];  pDst[247] = pSrc[247];
+        pDst[248] = pSrc[248];  pDst[249] = pSrc[249];
+        pDst[250] = pSrc[250];  pDst[251] = pSrc[251];
+        pDst[252] = pSrc[252];  pDst[253] = pSrc[253];
+        pDst[254] = pSrc[254];  pDst[255] = pSrc[255];
+
+#endif
+
+}
+
+/*
+ * ATIMach64HideCursor --
+ *
+ * Turn off hardware cursor.
+ */
+static void
+ATIMach64HideCursor
+(
+    ScrnInfoPtr pScreenInfo
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    if (!(pATI->NewHW.gen_test_cntl & GEN_CUR_EN))
+        return;
+
+    pATI->NewHW.gen_test_cntl &= ~GEN_CUR_EN;
+    out8(GEN_TEST_CNTL, GetByte(pATI->NewHW.gen_test_cntl, 0));
+}
+
+/*
+ * ATIMach64ShowCursor --
+ *
+ * Turn on hardware cursor.
+ */
+static void
+ATIMach64ShowCursor
+(
+    ScrnInfoPtr pScreenInfo
+)
+{
+    ATIPtr pATI = ATIPTR(pScreenInfo);
+
+    if (pATI->NewHW.gen_test_cntl & GEN_CUR_EN)
+        return;
+
+    pATI->NewHW.gen_test_cntl |= GEN_CUR_EN;
+    out8(GEN_TEST_CNTL, GetByte(pATI->NewHW.gen_test_cntl, 0));
+}
+
+/*
+ * ATIMach64UseHWCursor --
+ *
+ * Notify cursor layer whether a hardware cursor is configured.
+ */
+static Bool
+ATIMach64UseHWCursor
+(
+    ScreenPtr pScreen,
+    CursorPtr pCursor
+)
+{
+    ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum];
+    ATIPtr      pATI        = ATIPTR(pScreenInfo);
+
+    if (!pATI->CursorBase)
+        return FALSE;
+
+#ifndef AVOID_CPIO
+
+    /*
+     * For some reason, the hardware cursor isn't vertically scaled when a VGA
+     * doublescanned or multiscanned mode is in effect.
+     */
+    if (pATI->NewHW.crtc == ATI_CRTC_MACH64)
+        return TRUE;
+    if ((pScreenInfo->currentMode->Flags & V_DBLSCAN) ||
+        (pScreenInfo->currentMode->VScan > 1))
+        return FALSE;
+
+#endif /* AVOID_CPIO */
+
+    return TRUE;
+}
+
+/*
+ * ATIMach64CursorInit --
+ *
+ * Initialise xf86CursorInfoRec fields with information specific to Mach64
+ * variants.
+ */
+Bool
+ATIMach64CursorInit
+(
+    xf86CursorInfoPtr pCursorInfo
+)
+{
+    /*
+     * For Mach64 variants, toggling hardware cursors on and off causes
+     * display artifacts.  Ask the cursor support layers to always paint the
+     * cursor (whether or not it is entirely transparent) and to not hide the
+     * cursor when reloading its image.  The three reasons behind turning off
+     * the hardware cursor that remain are when it moves to a different screen,
+     * on a switch to a software cursor or to a different virtual console.
+     */
+    pCursorInfo->Flags = HARDWARE_CURSOR_TRUECOLOR_AT_8BPP |
+        HARDWARE_CURSOR_INVERT_MASK |
+        HARDWARE_CURSOR_SHOW_TRANSPARENT |
+        HARDWARE_CURSOR_UPDATE_UNHIDDEN |
+        HARDWARE_CURSOR_AND_SOURCE_WITH_MASK |
+
+#if X_BYTE_ORDER != X_LITTLE_ENDIAN
+
+        HARDWARE_CURSOR_BIT_ORDER_MSBFIRST |
+
+#endif /* X_BYTE_ORDER */
+
+        HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_1;
+    pCursorInfo->MaxWidth = pCursorInfo->MaxHeight = 64;
+
+    pCursorInfo->SetCursorColors = ATIMach64SetCursorColours;
+    pCursorInfo->SetCursorPosition = ATIMach64SetCursorPosition;
+    pCursorInfo->LoadCursorImage = ATIMach64LoadCursorImage;
+    pCursorInfo->HideCursor = ATIMach64HideCursor;
+    pCursorInfo->ShowCursor = ATIMach64ShowCursor;
+    pCursorInfo->UseHWCursor = ATIMach64UseHWCursor;
+
+    return TRUE;
+}