diff options
| author | Dave Airlie <airlied@linux.ie> | 2007-11-16 15:04:01 +1000 |
|---|---|---|
| committer | Dave Airlie <airlied@linux.ie> | 2007-11-16 15:04:01 +1000 |
| commit | cca7af3c4910983f7f090792986fcbfa0dc97cfb (patch) | |
| tree | ab7b9506eb190382284c21672cee3159b9ee9a7c /src | |
| parent | d39eb2077c6b2fc094ccd952772528eb9428c587 (diff) | |
remove avivo_reg.h
Diffstat (limited to 'src')
| -rw-r--r-- | src/avivo_reg.h | 502 |
1 files changed, 0 insertions, 502 deletions
diff --git a/src/avivo_reg.h b/src/avivo_reg.h deleted file mode 100644 index 0a533036..00000000 --- a/src/avivo_reg.h +++ /dev/null @@ -1,502 +0,0 @@ -/* AVIVO registers are specific to the AVIVO display engine, first - * introduced on R5xx. - * - * CRTCs are the master unit. A CRTC controls scanout, and both the - * DACs (be it TV or VGA) and TMDS transmitters take their input from - * the CRTC. - */ - -/* Core engine. */ -#define AVIVO_ENGINE_STATUS 0x0014 - -/* Memory mapping. */ -#define AVIVO_MC_INDEX 0x0070 -/* AVIVO_MC_MEMORY_MAP control memory mapping of the video card ram: - * base is higher 16bits of the starting address at which card - * sees it own memory. end is higher 16bits address at which card - * memory should end (might be usefull if you want to use half memory - * but don't know what does the card if you address out of bound - * memory, likely trigger pci stuff which often end in bad things). - */ -# define MC00 0x00 -#define R520_MC_STATUS 0x00 -#define R520_MC_STATUS_IDLE (1<<1) -# define MC01 0x01 -# define MC02 0x02 -# define MC03 0x03 -# define AVIVO_MC_MEMORY_MAP 0x04 -# define AVIVO_MC_MEMORY_MAP_BASE_MASK (0xFFFF << 0) -# define AVIVO_MC_MEMORY_MAP_BASE_SHIFT 0 -# define AVIVO_MC_MEMORY_MAP_END_MASK (0xFFFF << 16) -# define AVIVO_MC_MEMORY_MAP_END_SHIFT 16 -# define MC05 0x05 -# define MC06 0x06 -# define MC07 0x07 -# define MC08 0x08 -#define RV515_MC_STATUS 0x08 -#define RV515_MC_STATUS_IDLE (1<<4) -# define MC09 0x09 -# define MC0a 0x0a -# define MC0b 0x0b -# define MC0c 0x0c -# define MC0d 0x0d -# define MC0e 0x0e -# define MC0f 0x0f -# define MC10 0x10 -# define MC11 0x11 -# define MC12 0x12 -# define MC13 0x13 -# define MC14 0x14 -# define MC15 0x15 -# define MC16 0x16 -# define MC17 0x17 -# define MC18 0x18 -# define MC19 0x19 -# define MC1a 0x1a -# define MC1b 0x1b -# define MC1c 0x1c -# define MC1d 0x1d -# define MC1e 0x1e -# define MC1f 0x1f -#define AVIVO_MC_DATA 0x0074 - -/* - * You set memory base at which card see its memory (should be the - * same as AVIVO_MC_MEMORY_MAP lower 16bits - */ -#define AVIVO_VGA_MEMORY_BASE 0x0134 -#define AVIVO_VGA_FB_START 0x0310 -#define AVIVO_VGA1_CONTROL 0x0330 - #define AVIVO_VGA1_CONTROL_MODE_ENABLE (1<<0) - #define AVIVO_VGA1_CONTROL_TIMING_SELECT (1<<8) - #define AVIVO_VGA1_CONTROL_SYNC_POLARITY_SELECT (1<<9) - #define AVIVO_VGA1_CONTROL_OVERSCAN_TIMING_SELECT (1<<10) - #define AVIVO_VGA1_CONTROL_OVERSCAN_COLOR_EN (1<<16) - #define AVIVO_VGA1_CONTROL_ROTATE (1<<24) -#define AVIVO_VGA2_CONTROL 0x0338 - #define AVIVO_VGA2_CONTROL_MODE_ENABLE (1<<0) - #define AVIVO_VGA2_CONTROL_TIMING_SELECT (1<<8) - #define AVIVO_VGA2_CONTROL_SYNC_POLARITY_SELECT (1<<9) - #define AVIVO_VGA2_CONTROL_OVERSCAN_TIMING_SELECT (1<<10) - #define AVIVO_VGA2_CONTROL_OVERSCAN_COLOR_EN (1<<16) - #define AVIVO_VGA2_CONTROL_ROTATE (1<<24) - -/* - * We believe reference clock is 108Mhz, we likely can change that using - * mystery PLL reg spoted below more dump are needed in order to find out. - * - * The formula we derived so far seems to work for card we have: - * (vclk is video mode clock) - * vclk = (1080 * AVIVO_PLL_POST_MUL) / - * (AVIVO_PLL_DIVIDER * AVIVO_PLL_POST_DIV * 40) - * It seems that AVIVO_PLL_DIVIDER * AVIVO_PLL_POST_DIV needs to be - * above 40 and that AVIVO_DIVIDER should be greater than AVIVO_PLL_POST_DIV - * Try to keep this constraint while computing PLL values. - */ -#define AVIVO_PLL1_POST_DIV_CNTL 0x0400 // REF_DIV_SRC -# define AVIVO_PLL_POST_DIV_EN (1 << 0) -#define AVIVO_PLL1_POST_DIV 0x0404 // REF_DIV -#define AVIVO_PLL1_POST_DIV_MYSTERY 0x040C -# define AVIVO_PLL_POST_DIV_MYSTERY_VALUE 0x10000 -#define AVIVO_PLL2_POST_DIV_CNTL 0x0410 -#define AVIVO_PLL2_POST_DIV 0x0414 -#define AVIVO_PLL2_POST_DIV_MYSTERY 0x041C -#define AVIVO_PLL1_POST_MUL 0x0430 // FB_DIV -# define AVIVO_PLL_POST_MUL_SHIFT 16 -#define AVIVO_PLL2_POST_MUL 0x0434 // FB_DIV -#define AVIVO_PLL1_DIVIDER_CNTL 0x0438 // POST DIV_SRC -# define AVIVO_PLL_DIVIDER_EN (1 << 0) -#define AVIVO_PLL1_DIVIDER 0x043C // POST DIV -#define AVIVO_PLL2_DIVIDER_CNTL 0x0440 -#define AVIVO_PLL2_DIVIDER 0x0444 // POST_DIV -#define AVIVO_PLL1_MYSTERY0 0x0448 // POST_DIV_SRC -# define AVIVO_PLL_MYSTERY0_VALUE 0x20704 -#define AVIVO_PLL2_MYSTERY0 0x044C -#define AVIVO_PLL1_MYSTERY1 0x0450 -# define AVIVO_PLL_MYSTERY1_VALUE 0x4310000 -#define AVIVO_PLL2_MYSTERY1 0x0454 -#define AVIVO_CRTC_PLL_SOURCE 0x0484 -# define AVIVO_CRTC1_PLL_SOURCE_SHIFT 0 -# define AVIVO_CRTC2_PLL_SOURCE_SHIFT 16 - -/* CRTC controls; these appear to influence the DAC's scanout. */ -#define AVIVO_CRTC1_H_TOTAL 0x6000 -#define AVIVO_CRTC1_H_BLANK 0x6004 -#define AVIVO_CRTC1_H_SYNC_WID 0x6008 -#define AVIVO_CRTC1_H_SYNC_POL 0x600c -#define AVIVO_CRTC1_V_TOTAL 0x6020 -#define AVIVO_CRTC1_V_BLANK 0x6024 -#define AVIVO_CRTC1_V_SYNC_WID 0x6028 -#define AVIVO_CRTC1_V_SYNC_POL 0x602c -#define AVIVO_CRTC1_CNTL 0x6080 -# define AVIVO_CRTC_EN (1 << 0) -#define AVIVO_CRTC1_BLANK_STATUS 0x6084 -#define AVIVO_CRTC1_STEREO_STATUS 0x60c0 - -/* These all appear to control the scanout from the framebuffer. - * Flicking SCAN_ENABLE low results in a black screen -- aside from - * the cursor. Messing with PITCH gives you the obvious symptoms, - * and messing with X_LENGTH and Y_LENGTH will give you a black - * screen beyond those bounds if you make it shorter. - * - * Messing with the format gives you ... odd results. Setting it - * to 3 exactly quadruples my display size, with the next three - * panes displaying the next parts of FB memory. BPP? - * - * FB_LOCATION gives me the obvious result; FB_END is exactly - * FB_LOCATION + (xres * yres * 2). FB_END doesn't appear to actually - * function as an upper bound. - */ -#define AVIVO_CRTC1_SCAN_ENABLE 0x6100 -# define AVIVO_CRTC_SCAN_EN (1 << 0) -#define AVIVO_CRTC1_FB_FORMAT 0x6104 -# define AVIVO_CRTC_FORMAT_ARGB15 (1 << 0) -# define AVIVO_CRTC_FORMAT_ARGB16 ((1 << 0) | (1 << 8)) -# define AVIVO_CRTC_FORMAT_ARGB32 (1 << 1) -# define AVIVO_CRTC_TILED (1 << 20) -# define AVIVO_CRTC_MACRO_ADDRESS_MODE (1 << 21) -#define AVIVO_CRTC1_FB_LOCATION 0x6110 -#define AVIVO_CRTC1_FB_END 0x6118 -/* This is in pixels, not bytes. Obviously. */ -#define AVIVO_CRTC1_PITCH 0x6120 -#define AVIVO_CRTC1_X_LENGTH 0x6134 -#define AVIVO_CRTC1_Y_LENGTH 0x6138 - -#define AVIVO_CRTC1_OFFSET_END 0x6454 - -#define AVIVO_CRTC1_FB_HEIGHT 0x652c -#define AVIVO_CRTC1_OFFSET_START 0x6580 -#define AVIVO_CRTC1_EXPANSION_SOURCE 0x6584 -#define AVIVO_CRTC1_EXPANSION_CNTL 0x6590 -# define AVIVO_CRTC_EXPANSION_EN (1 << 0) -#define AVIVO_CRTC1_6594 0x6594 -# define AVIVO_CRTC1_6594_VALUE ((1 << 8) | (1 << 0)) -#define AVIVO_CRTC1_659C 0x659C -# define AVIVO_CRTC1_659C_VALUE ((1 << 1)) -#define AVIVO_CRTC1_65A4 0x65a4 -# define AVIVO_CRTC1_65A4_VALUE ((1 << 16) | (1 << 0)) -#define AVIVO_CRTC1_65A8 0x65a8 -# define AVIVO_CRTC1_65A8_VALUE ((1 << 16) | (1 << 14)) -#define AVIVO_CRTC1_65AC 0x65ac -# define AVIVO_CRTC1_65AC_VALUE ((1 << 15) | (1 << 14) | (1 << 13)) -#define AVIVO_CRTC1_65B0 0x65b0 -# define AVIVO_CRTC1_65B0_VALUE ((1 << 17) | (1 << 16) | (1 << 8)) -#define AVIVO_CRTC1_65B8 0x65b8 -# define AVIVO_CRTC1_65B8_VALUE ((1 << 16)) -#define AVIVO_CRTC1_65BC 0x65bc -# define AVIVO_CRTC1_65BC_VALUE ((1 << 16)) -#define AVIVO_CRTC1_65C0 0x65c0 -# define AVIVO_CRTC1_65C0_VALUE ((1 << 17) | (1 << 16) | (1 << 8)) -#define AVIVO_CRTC1_65C8 0x65c8 -# define AVIVO_CRTC1_65C8_VALUE ((1 << 16)) - -#define AVIVO_CRTC2_H_TOTAL 0x6800 -#define AVIVO_CRTC2_H_BLANK 0x6804 -#define AVIVO_CRTC2_H_SYNC_WID 0x6808 -#define AVIVO_CRTC2_H_SYNC_POL 0x680c -#define AVIVO_CRTC2_V_TOTAL 0x6820 -#define AVIVO_CRTC2_V_BLANK 0x6824 -#define AVIVO_CRTC2_V_SYNC_WID 0x6828 -#define AVIVO_CRTC2_V_SYNC_POL 0x682c -#define AVIVO_CRTC2_CNTL 0x6880 -#define AVIVO_CRTC2_BLANK_STATUS 0x6884 - -#define AVIVO_CRTC2_SCAN_ENABLE 0x6900 -#define AVIVO_CRTC2_FB_FORMAT 0x6904 -#define AVIVO_CRTC2_FB_LOCATION 0x6910 -#define AVIVO_CRTC2_FB_END 0x6918 -#define AVIVO_CRTC2_PITCH 0x6920 -#define AVIVO_CRTC2_X_LENGTH 0x6934 -#define AVIVO_CRTC2_Y_LENGTH 0x6938 - -#define AVIVO_CRTC2_OFFSET_END 0x6c54 - -#define AVIVO_CRTC2_FB_HEIGHT 0x6d2c -#define AVIVO_CRTC2_OFFSET_START 0x6d80 -#define AVIVO_CRTC2_EXPANSION_SOURCE 0x6d84 -#define AVIVO_CRTC2_EXPANSION_CNTL 0x6d90 -#define AVIVO_CRTC2_6594 0x6d94 -#define AVIVO_CRTC2_659C 0x6d9C -#define AVIVO_CRTC2_65A4 0x6da4 -#define AVIVO_CRTC2_65A8 0x6da8 -#define AVIVO_CRTC2_65AC 0x6dac -#define AVIVO_CRTC2_65B0 0x6db0 -#define AVIVO_CRTC2_65B8 0x6db8 -#define AVIVO_CRTC2_65BC 0x6dbc -#define AVIVO_CRTC2_65C0 0x6dc0 -#define AVIVO_CRTC2_65C8 0x6dc8 - -#define AVIVO_DACA_CNTL 0x7800 -#define AVIVO_DACA_CRTC_SOURCE 0x7804 -# define AVIVO_DAC_EN (1 << 0) -#define AVIVO_DACA_FORCE_OUTPUT_CNTL 0x783c -# define AVIVO_DACA_FORCE_OUTPUT_CNTL_FORCE_DATA_EN (1 << 0) -# define AVIVO_DACA_FORCE_OUTPUT_CNTL_DATA_SEL_SHIFT (8) -# define AVIVO_DACA_FORCE_OUTPUT_CNTL_DATA_SEL_BLUE (1 << 0) -# define AVIVO_DACA_FORCE_OUTPUT_CNTL_DATA_SEL_GREEN (1 << 1) -# define AVIVO_DACA_FORCE_OUTPUT_CNTL_DATA_SEL_RED (1 << 2) -# define AVIVO_DACA_FORCE_OUTPUT_CNTL_DATA_ON_BLANKB_ONLY (1 << 24) -#define AVIVO_DACA_POWERDOWN 0x7850 -# define AVIVO_DACA_POWERDOWN_POWERDOWN (1 << 0) -# define AVIVO_DACA_POWERDOWN_BLUE (1 << 8) -# define AVIVO_DACA_POWERDOWN_GREEN (1 << 16) -# define AVIVO_DACA_POWERDOWN_RED (1 << 24) - -#define AVIVO_DACB_CNTL 0x7a00 -#define AVIVO_DACB_CRTC_SOURCE 0x7a04 -#define AVIVO_DACB_FORCE_OUTPUT_CNTL 0x7a3c -# define AVIVO_DACB_FORCE_OUTPUT_CNTL_FORCE_DATA_EN (1 << 0) -# define AVIVO_DACB_FORCE_OUTPUT_CNTL_DATA_SEL_SHIFT (8) -# define AVIVO_DACB_FORCE_OUTPUT_CNTL_DATA_SEL_BLUE (1 << 0) -# define AVIVO_DACB_FORCE_OUTPUT_CNTL_DATA_SEL_GREEN (1 << 1) -# define AVIVO_DACB_FORCE_OUTPUT_CNTL_DATA_SEL_RED (1 << 2) -# define AVIVO_DACB_FORCE_OUTPUT_CNTL_DATA_ON_BLANKB_ONLY (1 << 24) -#define AVIVO_DACB_POWERDOWN 0x7a50 -# define AVIVO_DACB_POWERDOWN_POWERDOWN (1 << 0) -# define AVIVO_DACB_POWERDOWN_BLUE (1 << 8) -# define AVIVO_DACB_POWERDOWN_GREEN (1 << 16) -# define AVIVO_DACB_POWERDOWN_RED (1 << 24) - -/* Frustratingly, at least on my R580, the DAC and TMDS orders - * appear inversed: 7800 and 7a80 enable/disable the same physical - * connector; ditto 7a00 and 7880. O brave new world! - */ -/* TMDS_CNTL only lower bit of each half bytes matters. - * UNK0 seems to have no effect on LVDS but kill the feed of DVI connector - * UNK1 really unknow: so far no visible change from setting it or not - * UNK2 really unknow: so far no visible change from setting it or not - * UNK3 really unknow: so far no visible change from setting it or not - * UNK4 seems to switch red & blue encoding - * UNK5 is the fun bits on some card people will see their desktop - * tiled 4 times but for most cards this will give wrong pictures - * UNK6 seems to kill the feed LVDS & DVI - */ -#define AVIVO_TMDSA_CNTL 0x7880 -# define AVIVO_TMDSA_CNTL_ENABLE (1 << 0) -# define AVIVO_TMDSA_CNTL_HPD_MASK (1 << 4) -# define AVIVO_TMDSA_CNTL_HPD_SELECT (1 << 8) -# define AVIVO_TMDSA_CNTL_SYNC_PHASE (1 << 12) -# define AVIVO_TMDSA_CNTL_PIXEL_ENCODING (1 << 16) -# define AVIVO_TMDSA_CNTL_DUAL_LINK_ENABLE (1 << 24) -# define AVIVO_TMDSA_CNTL_SWAP (1 << 28) -#define AVIVO_TMDSA_CRTC_SOURCE 0x7884 -/* 78a8 appears to be some kind of (reasonably tolerant) clock? - * 78d0 definitely hits the transmitter, definitely clock. */ -/* MYSTERY1 This appears to control dithering? */ -#define AVIVO_TMDSA_BIT_DEPTH_CONTROL 0x7894 -# define AVIVO_TMDS_BIT_DEPTH_CONTROL_TRUNCATE_EN (1 << 0) -# define AVIVO_TMDS_BIT_DEPTH_CONTROL_TRUNCATE_DEPTH (1 << 4) -# define AVIVO_TMDS_BIT_DEPTH_CONTROL_SPATIAL_DITHER_EN (1 << 8) -# define AVIVO_TMDS_BIT_DEPTH_CONTROL_SPATIAL_DITHER_DEPTH (1 << 12) -# define AVIVO_TMDS_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_EN (1 << 16) -# define AVIVO_TMDS_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_DEPTH (1 << 20) -# define AVIVO_TMDS_BIT_DEPTH_CONTROL_TEMPORAL_LEVEL (1 << 24) -# define AVIVO_TMDS_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_RESET (1 << 26) -#define AVIVO_TMDSA_DCBALANCER_CONTROL 0x78d0 -# define AVIVO_TMDSA_DCBALANCER_CONTROL_EN (1 << 0) -# define AVIVO_TMDSA_DCBALANCER_CONTROL_TEST_EN (1 << 8) -# define AVIVO_TMDSA_DCBALANCER_CONTROL_TEST_IN_SHIFT (16) -# define AVIVO_TMDSA_DCBALANCER_CONTROL_FORCE (1 << 24) -#define AVIVO_TMDSA_DATA_SYNCHRONIZATION 0x78d8 -# define AVIVO_TMDSA_DATA_SYNCHRONIZATION_DSYNSEL (1 << 0) -# define AVIVO_TMDSA_DATA_SYNCHRONIZATION_PFREQCHG (1 << 8) -#define AVIVO_TMDSA_CLOCK_ENABLE 0x7900 -#define AVIVO_TMDSA_TRANSMITTER_ENABLE 0x7904 -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_TX0_ENABLE (1 << 0) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKC0EN (1 << 1) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD00EN (1 << 2) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD01EN (1 << 3) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD02EN (1 << 4) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_TX1_ENABLE (1 << 8) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD10EN (1 << 10) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD11EN (1 << 11) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKD12EN (1 << 12) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_TX_ENABLE_HPD_MASK (1 << 16) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKCEN_HPD_MASK (1 << 17) -# define AVIVO_TMDSA_TRANSMITTER_ENABLE_LNKDEN_HPD_MASK (1 << 18) - -/* I don't know any of the bits here, only that enabling (1 << 5) - * without (1 << 4) makes things go utterly mental ... seems to be - * the transmitter clock again. */ -/* 790c is a clock? - * 7910 appears to be some kind of control field, again. (1 << 25) - * must be enabled to get a signal on my monitor. */ -#define AVIVO_TMDSA_TRANSMITTER_CONTROL 0x7910 -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_PLL_ENABLE (1 << 0) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_PLL_RESET (1 << 1) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_PLL_HPD_MASK_SHIFT (2) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_IDSCKSEL (1 << 4) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_BGSLEEP (1 << 5) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_PLL_PWRUP_SEQ_EN (1 << 6) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_TMCLK (1 << 8) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_TMCLK_FROM_PADS (1 << 13) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_TDCLK (1 << 14) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_TDCLK_FROM_PADS (1 << 15) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_CLK_PATTERN_SHIFT (16) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_BYPASS_PLL (1 << 28) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_USE_CLK_DATA (1 << 29) -# define AVIVO_TMDSA_TRANSMITTER_CONTROL_INPUT_TEST_CLK_SEL (1 << 31) - -#define AVIVO_LVTMA_CNTL 0x7a80 -# define AVIVO_LVTMA_CNTL_ENABLE (1 << 0) -# define AVIVO_LVTMA_CNTL_HPD_MASK (1 << 4) -# define AVIVO_LVTMA_CNTL_HPD_SELECT (1 << 8) -# define AVIVO_LVTMA_CNTL_SYNC_PHASE (1 << 12) -# define AVIVO_LVTMA_CNTL_PIXEL_ENCODING (1 << 16) -# define AVIVO_LVTMA_CNTL_DUAL_LINK_ENABLE (1 << 24) -# define AVIVO_LVTMA_CNTL_SWAP (1 << 28) -#define AVIVO_LVTMA_CRTC_SOURCE 0x7a84 -#define AVIVO_LVTMA_BIT_DEPTH_CONTROL 0x7a94 -# define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TRUNCATE_EN (1 << 0) -# define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TRUNCATE_DEPTH (1 << 4) -# define AVIVO_LVTMA_BIT_DEPTH_CONTROL_SPATIAL_DITHER_EN (1 << 8) -# define AVIVO_LVTMA_BIT_DEPTH_CONTROL_SPATIAL_DITHER_DEPTH (1 << 12) -# define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_EN (1 << 16) -# define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_DEPTH (1 << 20) -# define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TEMPORAL_LEVEL (1 << 24) -# define AVIVO_LVTMA_BIT_DEPTH_CONTROL_TEMPORAL_DITHER_RESET (1 << 26) - -#define AVIVO_LVTMA_DCBALANCER_CONTROL 0x7ad0 -# define AVIVO_LVTMA_DCBALANCER_CONTROL_EN (1 << 0) -# define AVIVO_LVTMA_DCBALANCER_CONTROL_TEST_EN (1 << 8) -# define AVIVO_LVTMA_DCBALANCER_CONTROL_TEST_IN_SHIFT (16) -# define AVIVO_LVTMA_DCBALANCER_CONTROL_FORCE (1 << 24) - -#define AVIVO_LVTMA_DATA_SYNCHRONIZATION 0x78d8 -# define AVIVO_LVTMA_DATA_SYNCHRONIZATION_DSYNSEL (1 << 0) -# define AVIVO_LVTMA_DATA_SYNCHRONIZATION_PFREQCHG (1 << 8) -#define AVIVO_LVTMA_CLOCK_ENABLE 0x7b00 - -#define AVIVO_LVTMA_TRANSMITTER_ENABLE 0x7b04 -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKC0EN (1 << 1) -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD00EN (1 << 2) -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD01EN (1 << 3) -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD02EN (1 << 4) -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD03EN (1 << 5) -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKC1EN (1 << 9) -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD10EN (1 << 10) -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD11EN (1 << 11) -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKD12EN (1 << 12) -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKCEN_HPD_MASK (1 << 17) -# define AVIVO_LVTMA_TRANSMITTER_ENABLE_LNKDEN_HPD_MASK (1 << 18) - -#define AVIVO_LVTMA_TRANSMITTER_CONTROL 0x7b10 -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_PLL_ENABLE (1 << 0) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_PLL_RESET (1 << 1) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_PLL_HPD_MASK_SHIFT (2) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_IDSCKSEL (1 << 4) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_BGSLEEP (1 << 5) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_PLL_PWRUP_SEQ_EN (1 << 6) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_TMCLK (1 << 8) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_TMCLK_FROM_PADS (1 << 13) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_TDCLK (1 << 14) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_TDCLK_FROM_PADS (1 << 15) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_CLK_PATTERN_SHIFT (16) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_BYPASS_PLL (1 << 28) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_USE_CLK_DATA (1 << 29) -# define AVIVO_LVTMA_TRANSMITTER_CONTROL_INPUT_TEST_CLK_SEL (1 << 31) - -#define AVIVO_LVTMA_PWRSEQ_CNTL 0x7af0 -# define AVIVO_LVTMA_PWRSEQ_EN (1 << 0) -# define AVIVO_LVTMA_PWRSEQ_PLL_ENABLE_MASK (1 << 2) -# define AVIVO_LVTMA_PWRSEQ_PLL_RESET_MASK (1 << 3) -# define AVIVO_LVTMA_PWRSEQ_TARGET_STATE (1 << 4) -# define AVIVO_LVTMA_SYNCEN (1 << 8) -# define AVIVO_LVTMA_SYNCEN_OVRD (1 << 9) -# define AVIVO_LVTMA_SYNCEN_POL (1 << 10) -# define AVIVO_LVTMA_DIGON (1 << 16) -# define AVIVO_LVTMA_DIGON_OVRD (1 << 17) -# define AVIVO_LVTMA_DIGON_POL (1 << 18) -# define AVIVO_LVTMA_BLON (1 << 24) -# define AVIVO_LVTMA_BLON_OVRD (1 << 25) -# define AVIVO_LVTMA_BLON_POL (1 << 26) - -#define AVIVO_LVTMA_PWRSEQ_STATE 0x7af4 -# define AVIVO_LVTMA_PWRSEQ_STATE_TARGET_STATE_R (1 << 0) -# define AVIVO_LVTMA_PWRSEQ_STATE_DIGON (1 << 1) -# define AVIVO_LVTMA_PWRSEQ_STATE_SYNCEN (1 << 2) -# define AVIVO_LVTMA_PWRSEQ_STATE_BLON (1 << 3) -# define AVIVO_LVTMA_PWRSEQ_STATE_DONE (1 << 4) -# define AVIVO_LVTMA_PWRSEQ_STATE_STATUS_SHIFT (8) - -#define AVIVO_LVDS_BACKLIGHT_CNTL 0x7af8 -# define AVIVO_LVDS_BACKLIGHT_CNTL_EN (1 << 0) -# define AVIVO_LVDS_BACKLIGHT_LEVEL_MASK 0x0000ff00 -# define AVIVO_LVDS_BACKLIGHT_LEVEL_SHIFT 8 - -/* The BIOS says so, anyway ... */ -#define AVIVO_GPIO_0 0x7e30 -#define AVIVO_GPIO_1 0x7e40 -#define AVIVO_GPIO_2 0x7e50 -#define AVIVO_GPIO_3 0x7e60 - -#define AVIVO_TMDS_STATUS 0x7e9c -# define AVIVO_TMDSA_CONNECTED (1 << 0) -# define AVIVO_LVTMA_CONNECTED (1 << 8) - -/* Cursor registers. */ -#define AVIVO_CURSOR1_CNTL 0x6400 -# define AVIVO_CURSOR_EN (1 << 0) -# define AVIVO_CURSOR_FORMAT_MASK (3 << 8) -# define AVIVO_CURSOR_FORMAT_ABGR 0x1 -# define AVIVO_CURSOR_FORMAT_ARGB 0x2 -# define AVIVO_CURSOR_FORMAT_SHIFT 8 -#define AVIVO_CURSOR1_LOCATION 0x6408 -/* x is in the top 16 bits; y in the lower 16. Note that _SIZE does not - * impact the in-memory format: it is always 64x64. */ -#define AVIVO_CURSOR1_SIZE 0x6410 -#define AVIVO_CURSOR1_POSITION 0x6414 - -#define AVIVO_I2C_STATUS 0x7d30 -# define AVIVO_I2C_STATUS_DONE (1 << 0) -# define AVIVO_I2C_STATUS_NACK (1 << 1) -# define AVIVO_I2C_STATUS_HALT (1 << 2) -# define AVIVO_I2C_STATUS_GO (1 << 3) -# define AVIVO_I2C_STATUS_MASK 0x7 -/* If radeon_mm_i2c is to be believed, this is HALT, NACK, and maybe - * DONE? */ -# define AVIVO_I2C_STATUS_CMD_RESET 0x7 -# define AVIVO_I2C_STATUS_CMD_WAIT (1 << 3) -#define AVIVO_I2C_STOP 0x7d34 -#define AVIVO_I2C_START_CNTL 0x7d38 -# define AVIVO_I2C_START (1 << 8) -# define AVIVO_I2C_CONNECTOR0 (0 << 16) -# define AVIVO_I2C_CONNECTOR1 (1 << 16) -#define R520_I2C_START (1<<0) -#define R520_I2C_STOP (1<<1) -#define R520_I2C_RX (1<<2) -#define R520_I2C_EN (1<<8) -#define R520_I2C_DDC1 (0<<16) -#define R520_I2C_DDC2 (1<<16) -#define R520_I2C_DDC3 (2<<16) -#define R520_I2C_DDC_MASK (3<<16) -#define AVIVO_I2C_CONTROL2 0x7d3c -# define AVIVO_I2C_7D3C_SIZE_SHIFT 8 -# define AVIVO_I2C_7D3C_SIZE_MASK (0xf << 8) -#define AVIVO_I2C_CONTROL3 0x7d40 -/* Reading is done 4 bytes at a time: read the bottom 8 bits from - * 7d44, four times in a row. - * Writing is a little more complex. First write DATA with - * 0xnnnnnnzz, then 0xnnnnnnyy, where nnnnnn is some non-deterministic - * magic number, zz is, I think, the slave address, and yy is the byte - * you want to write. */ -#define AVIVO_I2C_DATA 0x7d44 -#define R520_I2C_ADDR_COUNT_MASK (0x7) -#define R520_I2C_DATA_COUNT_SHIFT (8) -#define R520_I2C_DATA_COUNT_MASK (0xF00) -#define AVIVO_I2C_CNTL 0x7d50 -# define AVIVO_I2C_EN (1 << 0) -# define AVIVO_I2C_RESET (1 << 8) - - -#define R520_PCLK_HDCP_CNTL 0x494 - -#define AVIVO_HDP_FB_LOCATION 0x134 -#define AVIVO_VGA_MEM_BASE 0x310 -#define AVIVO_VGA_SURF_ADDR 0x318 -#define AVIVO_D1VGA_CTRL 0x330 -#define AVIVO_D2VGA_CTRL 0x338 - -#define AVIVO_DVGA_MODE_ENABLE (1<<0) - - |