diff options
141 files changed, 21 insertions, 53302 deletions
diff --git a/README.ati.sgml b/README.ati.sgml deleted file mode 100644 index ed18393d..00000000 --- a/README.ati.sgml +++ /dev/null @@ -1,634 +0,0 @@ -<!DOCTYPE linuxdoc PUBLIC "-//Xorg//DTD linuxdoc//EN"[ -<!ENTITY % defs SYSTEM "defs.ent"> %defs; -]> - -<article> - -<!-- Title information --> - -<title>ATI Adapters README file -<author>Marc Aurele La France -<date>2002 February 12 - - - - - -<ident> -$Id$ -Based on XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/ati.sgml,v 3.42 2003/01/20 03:43:07 dawes Exp -</ident> - -<abstract> -This is the README for the XAA ATI driver included in this release. -</abstract> - -<!-- Table of contents --> -<toc> - -<!-- Begin the document --> - -<sect>Statement of intent<p> -Generally speaking, the driver is intended for all ATI video adapters, -providing maximum video function within hardware limitations. -The driver is also intended to optionally provide the same level of support for -generic VGA or 8514/A adapters. -This driver is still being actively developed, meaning that it currently does -not yet fully meet these goals.<p> -The driver will provide -<itemize> -<item>accelerated support if an ATI accelerator is detected <it>and</it> the -user has not requested that this support be disabled; otherwise -<item>accelerated support if a non-ATI 8514/A-capable adapter is detected -<it>and</it> the user has requested such support; otherwise -<item>unaccelerated SuperVGA support if an ATI VGA-capable adapter is detected; -otherwise -<item>generic VGA support if a non-ATI VGA-capable adapter is detected -<it>and</it> the user has requested such support. -</itemize> -Thus, the level of support provided not only depends on what the driver detects -in the system, but also, on what the user specifies in the xorg.conf file. -See the <bf>``xorg.conf specifications''</bf> section below for details.<p> -If none of the above conditions are met, the ATI driver will essentially -disable itself to allow other drivers to examine the system.<p> -Note that I am currently considering removing the driver's support for generic -VGA. -If you have any concerns about this, please contact me at -<email>tsi@xfree86.org</email>. -<sect>A note on acceleration<p> -The meaning of ``acceleration'', as used in this document, needs to be -clarified. -Two of the many components in an accelerator are the CRT controller (CRTC) and -the Draw Engine. -This is in addition to another CRTC that, generally, is also present in the -system (often in the same chip) and typically provides EGA, VGA or SuperVGA -functionality.<p> -A CRTC is the component of a graphics controller that is responsible for -reading video memory for output to the screen. -A Draw Engine is an accelerator component that can be programmed to manipulate -video memory contents, thus freeing the CPU for other tasks.<p> -When the VGA CRTC is used, all drawing operations into video memory are the -responsibility of the system's CPU, i.e. no Draw Engine can be used. -On the other hand, if the accelerator's CRTC is chosen to drive the screen, -the Draw Engine can also be used for drawing operations, although the CPU can -still be used for this purpose if it can access the accelerator's video -memory.<p> -Video acceleration refers to the programming of an accelerator's Draw Engine to -offload drawing operations from the CPU, and thus also implies the use of the -accelerator's CRTC.<p> -<sect>Current implementation for ATI adapters<p> -The driver currently supports the SuperVGA capabilities of all ATI adapters -except some early Mach8 and Mach32 adapters that do not provide the required -functionality. -This support works for monochrome, 16-colour and 256-colour video modes, if one -of the following ATI graphics controller chips is present: -<verb> -VGAWonder series: 18800, 18800-1, 28800-2, 28800-4, 28800-5, 28800-6 - Mach32 series: 68800-3, 68800-6, 68800AX, 68800LX - Mach64 series: 88800GX-C, 88800GX-D, 88800GX-E, 88800GX-F, 88800CX, - 264CT, 264ET, 264VT, 264GT (3D Rage), 264VT-B, 264VT3, - 264VT4, 264GT-B (3D Rage II), 3D Rage IIc, 3D Rage Pro, - 3D Rage LT, 3D Rage LT Pro, 3D Rage XL, 3D Rage XC, - 3D Rage Mobility (including the -M and -P variants)</verb> -The driver also supports 32K, 64K and 16M-colour modes on the 264xT and 3D Rage -series of adapters using the accelerator CRTC (but not the VGA CRTC).<p> -The newer Rage 128 and Radeon chips are not yet supported by this driver. -Rage 128's and Radeon's are, however, supported by separate drivers, and -owners of such adapters should consult the documentation provided with these -drivers. -This driver will also invoke the appropriate driver if it finds Rage 128 and/or -Radeon adapter(s) in the system.<p> -Adapters based on the above chips have been marketed under a rather large -number of names over the years. -Among them are: -<verb> -VGAWonder series: VGAWonder V3, VGAWonder V4, VGAWonder V5, VGAWonder+, - VGAWonder XL, VGAWonder XL24, VGAWonder VLB, VGA Basic, - VGA Basic 16, VGA Edge, VGA Edge 16, VGA Integra, - VGA Charger, VGAStereo F/X, VGA 640, VGA 800, VGA 1024, - VGA 1024D, VGA 1024 XL, VGA 1024 DXL, VGA 1024 VLB - Mach8 series: Graphics Ultra, Graphics Vantage, VGAWonder GT - (None of the 8514/Ultra and 8514 Vantage series is - supported at this time) - Mach32 series: Graphics Ultra+, Graphics Ultra Pro, Graphics Wonder, - Graphics Ultra XLR, Graphics Ultra AXO, VLB mach32-D, - PCI mach32-D, ISA mach32 - Mach64 series: Graphics Xpression, Graphics Pro Turbo, WinBoost, - WinTurbo, Graphics Pro Turbo 1600, Video Xpression, - 3D Xpression, Video Xpression+, 3D Xpression+, - 3D Charger, Video Charger, WinCharger, All-In-Wonder, - All-In-Wonder PRO, 3D Pro Turbo, XPERT@Play, - XPERT@Play 98, XPERT@Work, XPERT 98, XPERT LCD, - XPERT XL</verb> -Also, a number of mainboards, laptops and notebooks harbour a Mach32 or Mach64 -controller.<p> -VGAWonder, Mach8 and Mach32 ISA adapters are available with or without a -mouse.<p> -These adapters are available with a variety of clock generators and RAMDACs. -The 264xT and 3D Rage series of chips are integrated controllers, meaning that -they include a programmable clock generator and a RAMDAC.<p> -For all but Mach64 adapters, this driver still does not provide support for -accelerated drawing to the screen. -This means that all drawing is done by the CPU, rather than by any accelerator -present in the system. -This can make opaque moves, for example, quite ``jerky''. -Also, given that IBM 8514/A and ATI Mach8 do not allow CPU access to their -frame buffer, the driver will currently ignore these accelerators. -Most Mach32 adapters provide both accelerated function and SuperVGA -functionality, but the driver currently only uses the VGA.<p> -The driver <it>does</it> however support the accelerator CRTC present in all -ATI Mach64 adapters. -For 256-colour, and higher depth modes, this support will be used by default, -although an xorg.conf option can be specified to use the SuperVGA CRTC -instead. -A linear video memory aperture is also available in 256-colour and higher depth -modes and enabled by default if a 264xT or 3D Rage controller is detected or, -on 88800 controllers, if the accelerator CRTC is used. -xorg.conf options are available to disable this aperture, or (for non-PCI -adapters) enable it or move it to some other address.<p> -By default, the driver provides some acceleration for Mach64 if the accelerator -CRTC is used, and modes whose colour depth greater than or equal to 8 are to be -used. -This support is as yet incomplete and can be disabled entirely with an -xorg.conf option.<p> -On non-Intel platforms, the driver can, currently, only support PCI Mach64 -adapters.<p> -<sect>Current implementation of generic VGA support for non-ATI adapters<p> -Support for generic VGA with non-ATI adapters is also implemented, but has -undergone only limited testing. -The driver will intentionally disallow the use of this support with ATI -adapters. -This support must be explicitly requested through an xorg.conf ChipSet -specification. -This prevents the current VGA generic driver from being disabled.<p> -This driver's generic VGA support is intended as an extension of that provided -by the current generic driver. -Specifically, within the architectural bounds defined by IBM's VGA standard, -this driver will allow the use of any 256-colour mode, and any dot clock -frequencies both of which allow for many more mode possibilities.<p> -The driver will enforce the following limitations derived from IBM's original -VGA implementation: -<itemize> -<item>There can only be a set of four (non-programmable) clocks to choose from. -<item>Video memory is limited to 256kB in monochrome and 16-colour modes. -<item>Video memory is limited to 64kB in 256-colour modes. -<item>Interlaced modes are not available. -<item>Colour depths higher than 8 are not available. -</itemize> -<sect>xorg.conf specifications<p> -The driver recognises a number of xorg.conf options. -In general, all such options should be specified in a ``Device'' section, and -affect only that ``Device'' section.<p> -Those options that affect how the driver associates adapters with ``Device'' -sections are described first. -The driver will ignore (with a message) a ``Device'' section if the section -cannot be associated with exactly one adapter in the system. -Similarly, the driver will ignore, or disable, (with a message) any adapter -that cannot be associated with exactly one ``Device'' section. -Thus, these options will be required in those uncommon cases where such unique -associations cannot automatically be made by the driver.<p> -Other options affect the driver's operation once an adapter has been assigned -to the ``Device'' section which contains them.<p> -<sect1>Driver ``ati''<p> -The use of this specification is highly recommended if the ``Device'' section -is to be recognised by the driver. -In fact, it is almost (but not quite) mandatory, particularly when using the -loader server as it indicates what driver is to be loaded and associated with -the ``Device'' section.<p> -<sect1>ChipSet ``name''<p> -The default ChipSet name for this driver is ``<it>ati</it>''. -In this case, any ATI adapter can be associated with the ``Device'' section. -If an ATI accelerator is detected and the driver supports it, the accelerator's -CRTC will be used to drive the screen. -Otherwise, the driver will programme the adapter's SuperVGA CRTC.<p> -If ``<it>ativga</it>'' is specified instead, the driver will ignore any ATI -accelerator it detects, but otherwise operate as if ``<it>ati</it>'' had been -specified. -This specification ensures the VGA CRTC is used.<p> -A ChipSet name of ``<it>ibmvga</it>'' causes any VGA-capable adapter in the -system to be associated with the ``Device'' section. -It enables the driver's generic VGA support, but only for non-ATI adapters. -If an ATI adapter is associated with the ``Device'' section, the driver will -operate as if ``<it>ativga</it>'' had been specified instead.<p> -A ChipSet name of ``<it>vgawonder</it>'' is equivalent to ``<it>ativga</it>'', -except that only VGAWonder-capable adapters can be assigned to the ``Device'' -section. -This specifically excludes the newer integrated Mach64 controllers.<p> -In some PCI or AGP systems, the driver will not, by default, probe for non-PCI -Mach32's or Mach64's. -This is because, before doing any such probe, the driver attempts to determine -if the probe can cause a lockup. -If the driver has enough information to determine that a lockup would occur, it -will skip the probe. -In some situations, this determination cannot be accurate, and the driver will -err on the side of caution, skipping the probe. -Specifying a ChipSet name of ``<it>mach32</it>'' or ``<it>mach64</it>'', as -appropriate, will force the driver to probe for the non-PCI adapter. -These ChipSet names should, therefore, only be used when there is in fact such -an adapter in the system. -They are otherwise equivalent to ``<it>ati</it>''.<p> -On non-Intel platforms, only ``<it>ati</it>'' and ``<it>mach64</it>'' ChipSet -values are operative.<p> -<sect1>ChipID & ChipRev specifications<p> -These specifications will cause the driver to associate the ``Device'' section -only with an adapter having the same attributes, or an adapter whose PCI device -ID the driver does not recognise. -In the second case, these options cause the driver to treat the adapter as if -it was one with the specified PCI device ID or revision. -ChipID can only be used with Mach32 or Mach64 adapters, and, thus, specifically -excludes any other adapter from matching the ``Device'' section. -ChipRev is meaningful only with Mach64 adapters, and then only if ChipID is -also specified in the same ``Device'' section.<p> -<sect1>IOBase<p> -This option limits the adapters that can be associated with the ``Device'' -section to the one with the specified I/O base. -This option only applies to Mach64 adapters and specifically excludes other -adapters.<p> -<sect1>BusID<p> -This option limits the adapters that can be associated with the ``Device'' -section to the one with the specified PCI Bus ID. -This specification excludes non-PCI adapters.<p> -<sect1>Clocks<p> -For the purpose of specifying a clock line in your xorg.conf, one of four -different situations can occur, as follows.<p> -Those configuring the driver's generic VGA support for a non-ATI adapter, -can skip ahead to the <bf>``Clocks for non-ATI adapters''</bf> section below. -Those <it>not</it> trying to configure the driver for a Mach64 adapter, can -skip ahead to the <bf>``Clocks for fixed clock generators on ATI -adapters''</bf> section below.<p> -The very earliest Mach64 adapters use fixed (i.e. non-programmable) clock -generators. -Very few of these (mostly prototypes) are known to exist, but if you have one -of these, you can also skip ahead to the <bf>``Clocks for fixed clock -generators on ATI adapters''</bf> section below.<p> -The two cases that are left deal with programmable clock generators, which are -used on the great majority of Mach64 adapters.<p> -If you are uncertain which situation applies to your adapter, you can run a -clock probe with the command ``<tt>X -probeonly</tt>''.<p> -<sect2>Clocks for supported programmable clock generators<p> -At bootup, video BIOS initialisation programmes an initial set of frequencies. -Two of these are reserved to allow the setting of modes that do not use a -frequency from this initial set. -One of these reserved slots is used by the BIOS mode set routine, the other by -the particular driver used (e.g. MS-Windows, AutoCAD, X, etc.). -The clock numbers reserved in this way are dependent on the particular clock -generator used by the adapter.<p> -The driver currently supports all programmable clock generators known to exist -on Mach64 adapters. -In this case, the driver will completely ignore any xorg.conf clock -specification, and programme the clock generator as needed by the modes used -during the X session.<p> -<sect2>Clocks for unsupported programmable clock generators<p> -This case is unlikely to occur, but is documented for the sake of -completeness.<p> -In this situation, the driver will probe the adapter for clock frequencies -unless xorg.conf clocks are already specified. -In either case, the driver will then attempt to normalise the clocks to one of -the following specifications: -<verb> -BIOS setting 1: - - Clocks 0.000 110.000 126.000 135.000 50.350 56.640 63.000 72.000 - 0.000 80.000 75.000 65.000 40.000 44.900 49.500 50.000 - 0.000 55.000 63.000 67.500 25.180 28.320 31.500 36.000 - 0.000 40.000 37.500 32.500 20.000 22.450 24.750 25.000</verb> -<verb> -BIOS setting 2: - - Clocks 0.000 110.000 126.000 135.000 25.180 28.320 31.500 36.000 - 0.000 80.000 75.000 65.000 40.000 44.900 49.500 50.000 - 0.000 55.000 63.000 67.500 12.590 14.160 15.750 18.000 - 0.000 40.000 37.500 32.500 20.000 22.450 24.750 25.000</verb> -<verb> -BIOS setting 3: - - Clocks 0.000 0.000 0.000 0.000 25.180 28.320 0.000 0.000 - 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 - 0.000 0.000 0.000 0.000 12.590 14.160 0.000 0.000 - 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000</verb> -If the driver matches the clocks to the third setting above, functionality will -be <it>extremely</it> limited (assuming the driver works at all).<p> -<sect2>Clocks for fixed clock generators on ATI adapters<p> -This section applies to all VGAWonder and Mach32 adapters, and to early Mach64 -prototypes.<p> -One of the following clocks specifications (or an initial subset thereof) can -be used depending on what the adapter uses to generate dot clocks: -<verb> -Crystals (VGA Wonder V3 and V4 adapters only): - - Clocks 50.000 56.644 0.000 44.900 44.900 50.000 0.000 36.000 - 25.000 28.322 0.000 22.450 22.450 25.000 0.000 18.000 - 16.667 18.881 0.000 14.967 14.967 16.667 0.000 12.000 - 12.500 14.161 0.000 11.225 11.225 12.500 0.000 9.000</verb> -<verb> -ATI 18810 clock generator: - - Clocks 30.240 32.000 37.500 39.000 42.954 48.771 0.000 36.000 - 40.000 0.000 75.000 65.000 50.350 56.640 0.000 44.900 - 15.120 16.000 18.750 19.500 21.477 24.386 0.000 18.000 - 20.000 0.000 37.500 32.500 25.175 28.320 0.000 22.450 - 10.080 10.667 12.500 13.000 14.318 16.257 0.000 12.000 - 13.333 0.000 25.000 21.667 16.783 18.880 0.000 14.967 - 7.560 8.000 9.375 9.750 10.739 12.193 0.000 9.000 - 10.000 0.000 18.750 16.250 12.586 14.160 0.000 11.225</verb> -<verb> -ATI 18811-0 and ATI 18812-0 clock generators: - - Clocks 30.240 32.000 110.000 80.000 42.954 48.771 92.400 36.000 - 39.910 44.900 75.000 65.000 50.350 56.640 0.000 44.900 - 15.120 16.000 55.000 40.000 21.477 24.386 46.200 18.000 - 19.955 22.450 37.500 32.500 25.175 28.320 0.000 22.450 - 10.080 10.667 36.667 26.667 14.318 16.257 30.800 12.000 - 13.303 14.967 25.000 21.667 16.783 18.880 0.000 14.967 - 7.560 8.000 27.500 20.000 10.739 12.193 23.100 9.000 - 9.978 11.225 18.750 16.250 12.588 14.160 0.000 11.225</verb> -<verb> -ATI 18811-1 and ATI 18811-2 clock generators: - - Clocks 135.000 32.000 110.000 80.000 100.000 126.000 92.400 36.000 - 39.910 44.900 75.000 65.000 50.350 56.640 0.000 44.900 - 67.500 16.000 55.000 40.000 50.000 63.000 46.200 18.000 - 19.955 22.450 37.500 32.500 25.175 28.320 0.000 22.450 - 45.000 10.667 36.667 26.667 33.333 42.000 30.800 12.000 - 13.303 14.967 25.000 21.667 16.783 18.880 0.000 14.967 - 33.750 8.000 27.500 20.000 25.000 31.500 23.100 9.000 - 9.978 11.225 18.750 16.250 12.588 14.160 0.000 11.225</verb> -<verb> -ICS 2494-AM clock generators (found on some Dell motherboards): - - Clocks 75.000 77.500 80.000 90.000 25.175 28.322 31.500 36.000 - 100.000 110.000 126.000 135.000 40.000 44.900 50.000 65.000 - 37.500 38.750 40.000 45.000 12.588 14.161 15.750 18.000 - 50.000 55.000 63.000 67.500 20.000 22.450 25.000 32.500 - 25.000 25.833 26.667 30.000 8.392 9.441 10.500 12.000 - 33.333 36.667 42.000 45.000 13.333 14.767 16.667 21.667 - 18.750 19.375 20.000 22.500 6.294 7.081 7.875 9.000 - 25.000 27.500 31.500 33.750 10.000 11.225 12.500 16.250</verb> -VGAWonder VLB, VGA 1024 VLB, Mach32 and Mach64 owners should only specify up to -the first 32 frequencies. -Any more will be ignored.<p> -Other clock generators that have been used on ATI adapters (which can all be -said to be clones of one of the above) might generate non-zero frequencies for -those that are zero above, or vice-versa.<p> -The order of the clocks <it>is</it> very important, although the driver will -reorder the specified clocks if it deems it appropriate to do so. -Mach32 and Mach64 owners should note that this order is different than what -they would use for previous accelerated servers.<p> -<sect2>Clocks for non-ATI adapters<p> -If no clocks are specified in the xorg.conf, the driver will probe for four -clocks, the second of which will be assumed to be 28.322 MHz. -The first clock will typically be 25.175 MHz, but there are exceptions. -You can include up to four clock frequencies in your xorg.conf to specify the -actual values used by the adapter. -Any more will be ignored.<p> -<sect1>Option <it>``nopanel_display''</it><p> -This specification is only effective when the driver detects that the adapter's -BIOS has initialised both the digital flat panel and CRT interfaces. -In such a situation, the driver will normally drive both the panel and the CRT. -This specification causes the driver to disable the digital flat panel and -display the screen image on the CRT instead, which could potentially allow for -larger physical resolutions than the panel can handle.<p> -<sect1>Option <it>``crt_display''</it><p> -This specification is only effective when the driver detects that the adapter's -BIOS has initialised the digital flat panel interface, but has disabled the -CRT interface. -In such a situation the driver will normally drive only the panel. -This specification causes the driver to instead display the same image on both -the panel and the CRT.<p> -<sect1>Option <it>``noaccel''</it><p> -By default, the driver will accelerate draw operations if a Mach64 CRTC is used -to drive the display. -As implemented in this driver, acceleration does not require a linear video -memory aperture. -This option disables this acceleration.<p> -<sect1>Option <it>``nolinear''</it><p> -By default, the driver will enable a linear video memory aperture for -256-colour and higher depth modes if it is also using a Mach64 accelerator CRTC -or an integrated Mach64 graphics chip. -This option disables this linear aperture.<p> -On non-Intel platforms, the driver requires a linear aperture and, so, this -option is ignored.<p> -<sect1>Option <it>``HWCursor''</it> and Option <it>``SWCursor''</it><p> -Option <it>``HWCursor''</it>, which is the default, specifies that hardware -facilities are to be used to paint the mouse pointer on the screen. -Option <it>``SWCursor''</it> specifies that the mouse pointer is to be drawn by -software, which is much slower. -If both options are specified, option <it>``SWCursor''</it> prevails. -Currently, these options are only acted upon for 256-colour or higher depth -modes, if a Mach64 accelerator CRTC, or a Mach64 integrated controller is being -used. -In all other situations, a software cursor will be used, regardless of what -these options specify.<p> -<sect1>Option <it>``SilkenMouse''</it><p> -This option is only acted upon when a hardware cursor is being used. -It specifies that the cursor's position on the screen is to be updated as -quickly as possible when the mouse is moved. -This is the default behaviour. -If this option is negated, the cursor may lag the mouse when the X server is -very busy.<p> -<sect1>Option <it>``shadowfb''</it><p> -If this option is enabled, the driver will cause the CPU to do each drawing -operation first into a shadow frame buffer in system virtual memory and then -copy the result into video memory. -If this option is not active, the CPU will draw directly into video memory. -Enabling this option is beneficial for those systems where reading from video -memory is, on average, slower than the corresponding read/modify/write -operation in system virtual memory. -This is normally the case for PCI or AGP adapters, and, so, this option is -enabled by default. -For other bus types, the default behaviour is to disable this option.<p> -Note that, due to various limitations, this option is forcibly disabled when a -linear video memory aperture is not enabled, when the frame buffer depth is -less than 8, or when acceleration is used.<p> -<sect1>Option <it>``dpms''</it><p> -This option enables the driver's support for VESA's Display Power Management -Specification.<p> -<sect1>Option <it>``backingstore''</it><p> -This is not specifically a driver option. -It is used to enable the server's support for backing store, a mechanism by -which pixel data for occluded window regions is remembered by the server -thereby alleviating the need to send expose events to X clients when the data -needs to be redisplayed.<p> -<sect1>MemBase <it>address</it><p> -This specification is only effective for non-PCI Mach64 adapters, and is used -to override the CPU address at which the adapter will map its video memory. -Normally, for non-PCI adapters, this address is set by a DOS install utility -provided with the adapter. -The MemBase option can also be used to enable the linear aperture in those -cases where ATI's utility was not, or can not be, used.<p> -For PCI and AGP adapters, this address is determined at system bootup according -to the PCI Plug'n'Play specification which arbitrates the resource requirements -of most devices in the system. -This means the driver can not easily change the linear aperture address.<p> -<sect1>Option <it>``ReferenceClock''</it> ``frequency''<p> -This option is only applicable to non-Intel platforms, where an adapter BIOS is -not available to the driver. -The option specifies the reference frequency used by the adapter's clock -generator. -The default is 14.318 MHz, and other typical values are 28.636, or 29.5 MHz.<p> -<sect1>ClockChip <it>``name''</it><p> -This option is only applicable to non-Intel platforms, where an adapter BIOS is -not available to the driver, and the driver cannot reliably determine whether -the clock generator the adapter uses is a variant of an ATI 18818 (a.k.a. -ICS 2595) or an unsupported clock generator. -The only values that are acted upon are <it>``ATI 18818-0''</it> or -<it>``ATI 18818-1''</it>. -From this specification, the driver derives a reference divider of 43 or 46 -(respectively) for use in clock programming calculations. -The driver's default behaviour, in this case, is to assume an unsupported clock -generator, which means it will treat it as a fixed-frequency clock generator, -as described under the heading <bf>``Clocks for unsupported programmable clock -generators''</bf> above.<p> -<sect>Video modes<p> -Mode timings can be derived from the information in X's doc subdirectory. -However, it is no longer required to specify such timings in an xorg.conf's -``Monitor'' section(s), if only standard mode timings are to be used. -The server automatically inserts VESA standard mode timings in every -``Monitor'' section, and these modes will be checked first for mode constraints -(monitor sync tolerances, video memory size, etc.).<p> -Furthermore, it is also no longer required to specify mode names in ``Display'' -subsections. -Should no mode names be specified (or those specified do not yield a usable -mode), the server will automatically select as a default resolution the largest -usable mode, whether or not the chosen mode is specified in the corresponding -``Monitor'' section.<p> -For a digital flat panel, any sync tolerances should be removed from the -corresponding ``Monitor'' section. -The driver will automatically calculate these from the mode that is active on -server entry. -The driver also inserts timings for a mode called <it>"Native panel mode"</it> -that represents the panel's native resolution.<p> -<sect>Known problems and limitations<p> -There are several known problems or limitations related to the ATI -driver. -They include:<p> -<itemize> -<item>When using a Mach64's accelerator CRTC, the virtual resolution must be -less than 8192 pixels wide. -The VGA CRTC further limits the virtual resolution width to less than 4096 -pixels, or to less than 2048 pixels for adapters based on 18800-x's (with 256kB -of memory) and on Mach64 integrated controllers. -These are hardware limits that cannot be circumvented. -<item>Virtual resolutions requiring more than 1MB of video memory (256kB in the -monochrome case) are not supported by the VGA CRTC on 88800GX and 88800CX -adapters. -This is a hardware limit that cannot be circumvented. -<item>Due to hardware limitations, doublescanned modes are not supported by the -accelerator CRTC in 88800GX, 88800CX, 264CT and 264ET adapters. -<item>The ``VScan'' modeline parameter is only supported when using the VGA -CRTC. -<item>Interlaced modes are not supported on 18800-x and 28800-x adapters when -using a virtual resolution that is 2048 pixels or wider. -When using a 18800-x with 256kB of video memory in 256-colour modes, this limit -is reduced to 1024. -This is yet another hardware limitation that cannot be circumvented. -<item>Video memory banking does not work in monochrome and 16-colour modes on -18800-x adapters. -This appears to be another hardware limit, but this conclusion cannot be -confirmed at this time. -The driver's default behaviour in this case is to limit video memory to 256kB. -<item>Video memory corruption can still occur during mode switches on 18800-x -adapters. -Symptoms of this problem include garbled fonts on return to text mode, and -various effects (snow, dashed lines, etc) on initial entry into a graphics -mode. -In the first case, the workaround is to use some other means of restoring the -text font. -On Linux, this can be accomplished with the kbd or svgalib packages. -In the second case, <htmlurl name="xrefresh(1)" url="xrefresh.1.html"> -will usually clean up the image. -No complete solution to this problem is currently known. -It appears this corruption occurs due to either video memory bandwidth or -RAMDAC limitations, and so the driver will limit mode clocks to 40MHz. -<item>There is some controversy over what the maximum allowed clock frequency -should be on 264xT and 3D Rage adapters. -For now, clocks will, by default, be limited to 80MHz, 135MHz, 170MHz, 200MHz -or 230MHz, depending on the specific controller. -This limit can only be increased (up to a driver-calculated absolute maximum) -through the DACSpeed specification in xorg.conf. -Be aware however that doing so is untested and might damage the adapter. -<item>Except as in the previous items, clocks are limited to 80MHz on most -adapters, although many are capable of higher frequencies. -This will eventually be fixed in a future release. -<item>The use of a laptop's hot-keys to switch displays while this driver is -active can cause lockups and/or other woes, and is therefore not recommended. -It is not currently possible to solve this problem.<p> -<item>In situations where the driver is to simultaneously display on both a -panel and a CRT, the same image will be seen on both. -In particular, this means the CRT must be able to synchronise with the timings -of the panel's native resolution. -This is quite evident when the panel has ``odd-ball'' dimensions, such as -1400x1050, a resolution not commonly possible on CRTs or projection -equipment.<p> -Also, the display of independent images on the panel and CRT is not currently -implemented, and might never be, pending resolution of the previous item.<p> -</itemize> -Support for the following will be added in a future release: -<itemize> -<item>Mach32's accelerator CRTC. -This support is the first step towards accelerated support for Mach32's, -Mach8's, 8514/A's and other clones. -<item>Colour depth greater than 8 on non-integrated controllers, where -permitted by the hardware. -<item>Mach32, Mach8 and 8514/A Draw Engines. -<item>Hardware cursors where implemented by hardware. -This has already been done for Mach64 integrated controllers. -<item>TVOut, i.e. the ability to use a television screen as a monitor. -<item>Motion Video, i.e. displaying an asynchronous data stream (TV signal, -DVD, etc.) in a window or full-screen. -<item>3D operations. -</itemize> -<sect>Reporting problems<p> -If you are experiencing problems that are not already recorded in this -document, first ensure that you have the latest current release of this driver -and the Xorg X server.. -Check the server's log (usually found in /var/log/Xorg.0.log) and <htmlurl -name="ftp://ftp.freedesktop.org/pub/Xorg" -url="ftp://ftp.freedesktop.org/pub/Xorg"> if you are uncertain.<p> -Secondly, please check Xorg's doc directory for additional information.<p> -Thirdly, a scan through the comp.windows.x.i386unix and comp.os.linux.x -newsgroups and the xorg mailing list using your favourite archiving -service can also prove useful in resolving problems.<p> -If you are still experiencing problems, you can send me <it>non-HTMLised</it> -e-mail at <email>tsi@xfree86.org</email>. -Please be as specific as possible when describing the problem(s), and include -an <it>unedited</it> copy of the server's log and the xorg.conf file used.<p> -<sect>Driver history<p> -The complete history of the driver is rather cloudy. -The following is more than likely to be incomplete and inaccurate.<p> -Apparently, Per Lindqvist first got a driver working with an early ATI adapter -under X386 1.1a. -This original driver might have actually been based on a non-functional ATI -driver written by Thomas Roell (currently of Xi Graphics).<p> -Then Doug Evans added support for the ATI VGA Wonder XL, trying in the process -to make the driver work with all other ATI adapters available at the time.<p> -Rik Faith obtained the X11R4 driver from Doug Evans in the summer of 1992 and -ported the code to the X386 part of X11R5. -This subsequently became part of XFree86.<p> -I (Marc Aurele La France) took over development and maintenance of the driver -in the fall of 1993 after Rik got rid of his VGA Wonder adapter.<p> -<sect>Driver versions<p> -Due to the introduction of loadable drivers in XFree86 4.0, it has become -necessary to track driver versions separately. -Driver releases use the following version numbering scheme.<p> -Version 1 of this driver is the one I inherited from Rik Faith. -This is the version found in XFree86 2.0 and 2.1.<p> -Version 2 is my first rewrite of this code which only ended up being a -partially unsuccessful attempt at generalising the driver for all VGA Wonder, -Mach32, and early Mach64 adapters. -Various releases of this version of the driver can be found in XFree86 2.1.1, -3.1, 3.1.1 and 3.1.2.<p> -Version 3 represents my second rewrite (although a rather lame one as rewrites -go). -Into version 3, I introduced clock programming for Mach64 adapters and merged -in the old ati_test debugging tool. -This is the version found in XFree86 3.2, 3.3 and 3.3.1.<p> -Version 4 is a rather major restructuring of version 3, which became larger -than I could comfortably handle in one source file. -This is the version found in XFree86 3.3.2, 3.3.3, 3.3.3.1, 3.3.3.2, 3.3.4, -3.3.5 and 3.3.6.<p> -Version 5 is an almost complete restructuring of version 4 to fit in the newer -driver API of XFree86 4.0 and later.<p> -The introduction of version 6 is a first swipe at porting the driver to -non-Intel architectures.<p> -</article> diff --git a/README.r128.sgml b/README.r128.sgml deleted file mode 100644 index 8d7f4480..00000000 --- a/README.r128.sgml +++ /dev/null @@ -1,138 +0,0 @@ -<!DOCTYPE linuxdoc PUBLIC "-//Xorg//DTD linuxdoc//EN"[ -<!ENTITY % defs SYSTEM "defs.ent"> %defs; -]> - -<article> -<title>Information for ATI Rage 128 Users -<author>Precision Insight, Inc., SuSE GmbH -<date>13 June 2000 - -<ident> -</ident> - -<toc> - -<sect>Supported Hardware -<p> -<itemize> - <item>ATI Rage 128 based cards -</itemize> - - -<sect>Features -<p> -<itemize> - <item>Full support (including hardware accelerated 2D drawing) for 8, 15, - 16, 24 bit pixel depths. - <item>Hardware cursor support to reduce sprite flicker. - <item>Support for high resolution video modes up to 1800x1440 @ 70Hz. - <item>Support for doublescan video modes (e.g., 320x200 and 320x240). - <item>Support for gamma correction at all pixel depths. - <item>Fully programmable clock supported. - <item>Robust text mode restore for VT switching. -</itemize> - - -<sect>Technical Notes -<p> -<itemize> - <item>None -</itemize> - - -<sect>Reported Working Video Cards -<p> -<itemize> - <item>Rage Fury AGP 32MB - <item>XPERT 128 AGP 16MB - <item>XPERT 99 AGP 8MB -</itemize> - - -<sect>Configuration -<p> -The driver auto-detects all device information necessary to -initialize the card. The only lines you need in the "Device" -section of your xorg.conf file are: -<verb> - Section "Device" - Identifier "Rage 128" - Driver "r128" - EndSection -</verb> -or let <tt>xorgconfig</tt> do this for you. - -However, if you have problems with auto-detection, you can specify: -<itemize> - <item>VideoRam - in kilobytes - <item>MemBase - physical address of the linear framebuffer - <item>IOBase - physical address of the memory mapped IO registers - <item>ChipID - PCI DEVICE ID -</itemize> - - -<sect>Driver Options -<p> -<itemize> - <item>"hw_cursor" - request hardware cursor (default) - <item>"sw_cursor" - software cursor only - <item>"no_accel" - software rendering only - <item>"dac_8_bit" - use color weight 888 in 8 bpp mode (default) - <item>"dac_6_bit" - use color weight 666 in 8 bpp mode (VGA emulation) -</itemize> - - -<sect>Known Limitations -<p> -<itemize> - <item>None -</itemize> - - -<sect>Authors -<p> -The X11R&relvers; driver was originally part of XFree86 4.4 rc2. - -The XFree86 4 driver was ported from XFree86 3.3.x and enhanced by: -<itemize> - <item>Rickard E. (Rik) Faith <email>faith@precisioninsight.com</email> - <item>Kevin E. Martin <email>kevin@precisioninsight.com</email> -</itemize> -<p> -The XFree86 4 driver was funded by ATI and was donated to The XFree86 -Project by: -<verb> - Precision Insight, Inc. - Cedar Park, TX - USA -</verb> -<p> -The XFree86 3.3.x driver used for the port was written by: -<itemize> - <item>Rickard E. (Rik) Faith <email>faith@precisioninsight.com</email> - <item>Kevin E. Martin <email>kevin@precisioninsight.com</email> -</itemize> -The XFree86 3.3.x driver was funded by ATI and was donated to The XFree86 -Project by Precision Insight, Inc. It was based in part on an earlier -driver that was written by: -<itemize> - <item>Alan Hourihane <email>alanh@fairlite.demon.co.uk</email> - <item>Dirk Hohndel <email>hohndel@suse.de</email> -</itemize> -<p>This early driver was funded and donated to The XFree86 Project by: -<verb> - SuSE GmbH - Schanzaekerstr. 10 - 90443 Nuernberg - Germany -</verb> - -<p> -<htmlurl name="http://www.precisioninsight.com" - url="http://www.precisioninsight.com"> -<p> -<htmlurl name="http://www.suse.com" - url="http://www.suse.com"> - - -</article> diff --git a/man/ati.man b/man/ati.man deleted file mode 100644 index abd7da31..00000000 --- a/man/ati.man +++ /dev/null @@ -1,30 +0,0 @@ -.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ati.man,v 1.2 2001/01/27 18:20:46 dawes Exp $ -.\" shorthand for double quote that works everywhere. -.ds q \N'34' -.TH ATI __drivermansuffix__ __vendorversion__ -.SH NAME -ati \- ATI video driver -.SH SYNOPSIS -.nf -.B "Section \*qDevice\*q" -.BI " Identifier \*q" devname \*q -.B " Driver \*qati\*q" -\ \ ... -.B EndSection -.fi -.SH DESCRIPTION -.B ati -is an XFree86 driver for ATI video cards. -THIS MAN PAGE NEEDS TO BE FILLED IN. -.SH SUPPORTED HARDWARE -The -.B ati -driver supports... -.SH CONFIGURATION DETAILS -Please refer to XF86Config(__filemansuffix__) for general configuration -details. This section only covers configuration details specific to this -driver. -.SH "SEE ALSO" -XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) -.SH AUTHORS -Authors include: ... diff --git a/man/r128.man b/man/r128.man deleted file mode 100644 index 0bb990a3..00000000 --- a/man/r128.man +++ /dev/null @@ -1,132 +0,0 @@ -.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128.man,v 1.4 2002/06/04 23:04:50 dawes Exp $ -.\" shorthand for double quote that works everywhere. -.ds q \N'34' -.TH R128 __drivermansuffix__ __vendorversion__ -.SH NAME -r128 \- ATI Rage 128 video driver -.SH SYNOPSIS -.nf -.B "Section \*qDevice\*q" -.BI " Identifier \*q" devname \*q -.B " Driver \*qr128\*q" -\ \ ... -.B EndSection -.fi -.SH DESCRIPTION -.B r128 -is an XFree86 driver for ATI Rage 128 based video cards. It contains -full support for 8, 15, 16 and 24 bit pixel depths, hardware -acceleration of drawing primitives, hardware cursor, video modes up to -1800x1440 @ 70Hz, doublescan modes (e.g., 320x200 and 320x240), gamma -correction at all pixel depths, a fully programming dot clock and robust -text mode restoration for VT switching. -.SH SUPPORTED HARDWARE -The -.B r128 -driver supports all ATI Rage 128 based video cards including the Rage -Fury AGP 32MB, the XPERT 128 AGP 16MB and the XPERT 99 AGP 8MB. -.SH CONFIGURATION DETAILS -Please refer to XF86Config(__filemansuffix__) for general configuration -details. This section only covers configuration details specific to this -driver. -.PP -The driver auto-detects all device information necessary to initialize -the card. However, if you have problems with auto-detection, you can -specify: -.PP -.RS 4 -VideoRam - in kilobytes -.br -MemBase - physical address of the linear framebuffer -.br -IOBase - physical address of the MMIO registers -.br -ChipID - PCI DEVICE ID -.RE -.PP -In addition, the following driver -.B Options -are supported: -.TP -.BI "Option \*qSWcursor\*q \*q" boolean \*q -Selects software cursor. The default is -.B off. -.TP -.BI "Option \*qNoAccel\*q \*q" boolean \*q -Enables or disables all hardware acceleration. The default is to -.B enable -hardware acceleration. -.TP -.BI "Option \*qDac6Bit\*q \*q" boolean \*q -Enables or disables the use of 6 bits per color component when in 8 bpp -mode (emulates VGA mode). By default, all 8 bits per color component -are used. The default is -.B off. -.TP -.BI "Option \*qVideoKey\*q \*q" integer \*q -This overrides the default pixel value for the YUV video overlay key. -The default value is -.B undefined. -.TP -.BI "Option \*qDisplay\*q \*q" string \*q -Select display mode for devices which support flat panels. Supported modes are: - -.B \*qFP\*q -- use flat panel; - -.B \*qCRT\*q -- use cathode ray tube; - -.B \*qMirror\*q -- use both FP and CRT; - -.B \*qBIOS\*q -- use mode as configured in the BIOS. - -The default is -.B FP. - -.PP -The following -.B Options -are mostly important for non-x86 architectures: -.TP -.BI "Option \*qProgramFPRegs\*q \*q" boolean \*q -Enable or disable programming of the flat panel registers. -Beware that this may damage your panel, so use this -.B at your own risk. -The default depends on the device. -.TP -.BI "Option \*qPanelWidth\*q \*q" integer \*q -.TP -.BI "Option \*qPanelHeight\*q \*q" integer \*q -Override the flat panel dimensions in pixels. They are used to program the flat panel -registers and normally determined using the video card BIOS. If the wrong dimensions -are used, the system may hang. -.TP -.BI "Option \*qUseFBDev\*q \*q" boolean \*q -Enable or disable use of an OS-specific framebuffer device interface -(which is not supported on all OSs). See fbdevhw(__drivermansuffix__) -for further information. -Default: off. -.TP -.BI "Option \*qDMAForXv\*q \*q" boolean \*q -Try or don't try to use DMA for Xv image transfers. This will reduce CPU -usage when playing big videos like DVDs, but may cause instabilities. -Default: off. - -.PP -The following additional -.B Options -are supported: -.TP -.BI "Option \*qShowCache\*q \*q" boolean \*q -Enable or disable viewing offscreen cache memory. A -development debug option. Default: off. - -.SH "SEE ALSO" -XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) -.SH AUTHORS -.nf -Rickard E. (Rik) Faith \fIfaith@precisioninsight.com\fP -Kevin E. Martin \fIkevin@precisioninsight.com\fP diff --git a/man/radeon.man b/man/radeon.man deleted file mode 100644 index 0a11d538..00000000 --- a/man/radeon.man +++ /dev/null @@ -1,426 +0,0 @@ -.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon.man,v 1.0 2003/01/31 23:04:50 -.ds q \N'34' -.TH RADEON __drivermansuffix__ __vendorversion__ -.SH NAME -radeon \- ATI RADEON video driver -.SH SYNOPSIS -.nf -.B "Section \*qDevice\*q" -.BI " Identifier \*q" devname \*q -.B " Driver \*qradeon\*q" -\ \ ... -.B EndSection -.fi -.SH DESCRIPTION -.B radeon -is a XFree86 driver for ATI RADEON based video cards. It contains -full support for 8, 15, 16 and 24 bit pixel depths, dual-head setup, -flat panel, hardware 2D acceleration, hardware 3D acceleration -(except R300 series cards), hardware cursor, XV extension, Xinerama extension. -.SH SUPPORTED HARDWARE -The -.B radeon -driver supports PCI and AGP video cards based on the following ATI chips -.TP 12 -.B R100 -Radeon 7200 -.TP 12 -.B RV100 -Radeon 7000(VE), M6 -.TP 12 -.B RS100 -Radeon IGP320(M) -.TP 12 -.B RV200 -Radeon 7500, M7, FireGL 7800 -.TP 12 -.B RS200 -Radeon IGP330(M)/IGP340(M) -.TP 12 -.B RS250 -Radeon Mobility 7000 IGP -.TP 12 -.B R200 -Radeon 8500, 9100, FireGL 8800/8700 -.TP 12 -.B RV250 -Radeon 9000PRO/9000, M9 -.TP 12 -.B RS300 -Radeon 9100 IGP -.TP 12 -.B RV280 -Radeon 9200PRO/9200/9200SE, M9+ -.TP 12 -.B R300 -Radeon 9700PRO/9700/9500PRO/9500/9600TX, FireGL X1/Z1 (2D only) -.TP 12 -.B R350 -Radeon 9800PRO/9800SE/9800, FireGL X2 (2D only) -.TP 12 -.B R360 -Radeon 9800XT (2d only) -.TP 12 -.B RV350 -Radeon 9600PRO/9600SE/9600, M10/M11, FireGL T2 (2D only) -.TP 12 -.B RV360 -Radeon 9600XT (2d only) - -.SH CONFIGURATION DETAILS -Please refer to XF86Config(__filemansuffix__) for general configuration -details. This section only covers configuration details specific to this -driver. -.PP -The driver auto\-detects all device information necessary to initialize -the card. However, if you have problems with auto\-detection, you can -specify: -.PP -.RS 4 -VideoRam \- in kilobytes -.br -MemBase \- physical address of the linear framebuffer -.br -IOBase \- physical address of the MMIO registers -.br -ChipID \- PCI DEVICE ID -.RE -.PP -In addition, the following driver -.B Options -are supported: -.TP -.BI "Option \*qSWcursor\*q \*q" boolean \*q -Selects software cursor. The default is -.B off. -.TP -.BI "Option \*qNoAccel\*q \*q" boolean \*q -Enables or disables all hardware acceleration. -.br -The default is to -.B enable -hardware acceleration. -.TP -.BI "Option \*qDac6Bit\*q \*q" boolean \*q -Enables or disables the use of 6 bits per color component when in 8 bpp -mode (emulates VGA mode). By default, all 8 bits per color component -are used. -.br -The default is -.B off. -.TP -.BI "Option \*qVideoKey\*q \*q" integer \*q -This overrides the default pixel value for the YUV video overlay key. -.br -The default value is -.B 0x1E. -.TP -.BI "Option \*qUseFBDev\*q \*q" boolean \*q -Enable or disable use of an OS\-specific framebuffer device interface -(which is not supported on all OSs). MergedFB does not work when this -option is in use. See fbdevhw(__drivermansuffix__) for further information. -.br -The default is -.B off. -.TP -.BI "Option \*qAGPMode\*q \*q" integer \*q -Set AGP data transfer rate. -(used only when DRI is enabled) -.br -1 \-\- x1 (default) -.br -2 \-\- x2 -.br -4 \-\- x4 -.br -others \-\- invalid -.TP -.BI "Option \*qAGPFastWrite\*q \*q" boolean \*q -Enable AGP fast write. -.br -(used only when DRI is enabled) -.br -The default is -.B off. -.TP -.BI "Option \*qBusType\*q \*q" string \*q -Used to replace previous ForcePCIMode option. -Should only be used when driver's bus detection is incorrect -or you want to force a AGP card to PCI mode. Should NEVER force -a PCI card to AGP bus. -.br -PCI \-\- PCI bus -.br -AGP \-\- AGP bus -.br -PCIE \-\- PCI Express (falls back to PCI at present) -.br -(used only when DRI is enabled) -.br -The default is -.B auto detect. -.TP -.BI "Option \*qDDCMode\*q \*q" boolean \*q -Force to use the modes queried from the connected monitor. -.br -The default is -.B off. -.TP -.BI "Option \*qDisplayPriority\*q \*q" string \*q -.br -Used to prevent flickering or tearing problem caused by display buffer underflow. -.br -AUTO \-\- Driver calculated (default). -.br -BIOS \-\- Remain unchanged from BIOS setting. - Use this if the calculation is not correct - for your card. -.br -HIGH \-\- Force to the highest priority. - Use this if you have problem with above options. - This may affect performance slightly. -.br -The default value is -.B AUTO. -.TP -.BI "Option \*qMonitorLayout\*q \*q" string \*q -.br -This option is used to overwrite the detected monitor types. -This is only required when driver makes a false detection. -The possible monitor types are: -.br -NONE \-\- Not connected -.br -CRT \-\- Analog CRT monitor -.br -TMDS \-\- Desktop flat panel -.br -LVDS \-\- Laptop flat panel -.br -This option can be used in following format: -.br -Option "MonitorLayout" "[type on primary], [type on secondary]" -.br -For example, Option "MonitorLayout" "CRT, TMDS" - -Primary/Secondary head for dual\-head cards: -.br -(when only one port is used, it will be treated as the primary regardless) -.br -.B Primary head: -.br -DVI port on DVI+VGA cards -.br -LCD output on laptops -.br -Internal TMDS port on DVI+DVI cards -.br -.B Secondary head: -.br -VGA port on DVI+VGA cards -.br -VGA port on laptops -.br -External TMDS port on DVI+DVI cards - -The default value is -.B undefined. -.TP -.BI "Option \*qMergedFB\*q \*q" boolean \*q -This enables merged framebuffer mode. In this mode you have a single -shared framebuffer with two viewports looking into it. It is similar -to Xinerama, but has some advantages. It is faster than Xinerama, the -DRI works on both heads, and it supports clone modes. -.br -Merged framebuffer mode provides two linked viewports looking into a -single large shared framebuffer. The size of the framebuffer is -determined by the -.B Virtual -keyword defined on the -.B Screen -section of your XF86Config file. It works just like regular virtual -desktop except you have two viewports looking into it instead of one. -.br -For example, if you wanted a desktop composed of two 1024x768 viewports -looking into a single desktop you would create a virtual desktop of -2048x768 (left/right) or 1024x1536 (above/below), e.g., -.br -.B Virtual 2048 768 -or -.B Virtual 1024 1536 -.br -The virtual desktop can be larger than larger than the size of the viewports -looking into it. In this case the linked viewports will scroll around in the -virtual desktop. Viewports with different sizes are also supported (e.g., one -that is 1024x768 and one that is 640x480). In this case the smaller viewport -will scroll relative to the larger one such that none of the virtual desktop -is inaccessable. If you do not define a virtual desktop the driver will create -one based on the orientation of the heads and size of the largest defined mode in -the display section that is supported on each head. -.br -The relation of the viewports in specified by the -.B CRT2Position -Option. The options are -.B Clone -, -.B LeftOf -, -.B RightOf -, -.B Above -, and -.B Below. -MergedFB is enabled by default if a monitor is detected on each output. If -no position is given it defaults to clone mode (the old clone options are now -deprecated, also, the option OverlayOnCRTC2 has been replaced by the Xv -attribute XV_SWITCHCRT; the overlay can be switched to CRT1 or CRT2 on the fly -in clone mode). -.br -The maximum framebuffer size that the 2D acceleration engine can handle is -8192x8192. The maximum framebuffer size that the 3D engine can handle is -2048x2048. -.br -.B Note: -Page flipping does not work well in certain configurations with MergedFB. If you -see rendering errors or other strange behavior, disable page flipping. Also MergedFB -is not compatible with the -.B UseFBDev -option. -.br -The default value is -.B undefined. -.TP -.BI "Option \*qCRT2HSync\*q \*q" "string" \*q -Set the horizontal sync range for the secondary monitor. -It is not required if a DDC\-capable monitor is connected. -.br -For example, Option "CRT2HSync" "30.0-86.0" -.br -The default value is -.B undefined. -.TP -.BI "Option \*qCRT2VRefresh\*q \*q" "string" \*q -Set the vertical refresh range for the secondary monitor. -It is not required if a DDC\-capable monitor is connected. -.br -For example, Option "CRT2VRefresh" "50.0-120.0" -.br -The default value is -.B undefined. -.TP -.BI "Option \*qCRT2Position\*q \*q" "string" \*q -Set the relationship of CRT2 relative to CRT1. Valid options are: -.B Clone -, -.B LeftOf -, -.B RightOf -, -.B Above -, and -.B Below -. -.br -For example, Option "CRT2Position" "RightOf" -.br -The default value is -.B Clone. -.TP -.BI "Option \*qMetaModes\*q \*q" "string" \*q -MetaModes are mode combinations for CRT1 and CRT2. If you are using merged -frame buffer mode and want to change modes (CTRL-ALT-+/-), these define which -modes will be switched to on CRT1 and CRT2. The MetaModes are defined as -CRT1Mode-CRT2Mode (800x600-1024x768). Modes listed individually (800x600) -define clone modes, that way you can mix clone modes with non-clone modes. -Also some programs require "standard" modes. -.br -Note: Any mode you use in the MetaModes must be defined in the -.B Screen -section of your XF86Config file. Modes not defined there will be ignored when -the MetaModes are parsed since the driver uses them to make sure the monitors can -handle those modes. If you do not define a MetaMode the driver will create -one based on the orientation of the heads and size of the largest defined mode in -the display section that is supported on each head. -.br -.B Modes "1024x768" "800x600" "640x480" -.br -For example, Option "MetaModes" "1024x768-1024x768 800x600-1024x768 640x480-800x600 800x600" -.br -The default value is -.B undefined. -.TP -.BI "Option \*qNoMergedXinerama\*q \*q" boolean \*q -Since merged framebuffer mode does not use Xinerama, apps are not able to intelligently -place windows. Merged framebuffer mode provides its own pseudo-Xinerama. This allows -Xinerama compliant applications to place windows appropriately. There are some caveats. -Since merged framebuffer mode is able to change relative screen sizes and orientations on -the fly, as well has having overlapping viewports, pseudo-Xinerama, might not always -provide the right hints. Also many Xinerama compliant applications only query Xinerama -once at startup; if the information changes, they may not be aware of the change. If -you are already using Xinerama (e.g., a single head card and a dualhead card providing -three heads), pseudo-Xinerama will be disabled. -.br -This option allows you turn off the driver provided pseudo-Xinerama extension. -.br -The default value is -.B FALSE. -.TP -.BI "Option \*qMergedXineramaCRT2IsScreen0\*q \*q" boolean \*q -By default the pseudo-Xinerama provided by the driver makes the left-most or bottom -head Xinerama screen 0. Certain Xinerama-aware applications do special things with -screen 0. To change that behavior, use this option. -.br -The default value is -.B undefined. -.TP -.BI "Option \*qMergedDPI\*q \*q" "string" \*q -The driver will attempt to figure out an appropriate DPI based on the DDC information -and the orientation of the heads when in merged framebuffer mode. If this value does -not suit you, you can manually set the DPI using this option. -.br -For example, Option "MergedDPI" "100 100" -.br -The default value is -.B undefined. -.TP -.BI "Option \*qIgnoreEDID\*q \*q" boolean \*q -Do not use EDID data for mode validation, but DDC is still used -for monitor detection. This is different from NoDDC option. -.br -The default value is -.B off. -.TP -.BI "Option \*qPanelSize\*q \*q" "string" \*q -Should only be used when driver cannot detect the correct panel size. -Apply to both desktop (TMDS) and laptop (LVDS) digital panels. -When a valid panel size is specified, the timings collected from -DDC and BIOS will not be used. If you have a panel with timings -different from that of a standard VESA mode, you have to provide -this information through the Modeline. -.br -For example, Option "PanelSize" "1400x1050" -.br -The default value is -.B none. -.TP -.BI "Option \*qPanelOff\*q \*q" boolean \*q -Disable panel output. -.br -The default value is -.B off. -.TP -.BI "Option \*qEnablePageFlip\*q \*q" boolean \*q -Enable page flipping for 3D acceleration. This will increase performance -but not work correctly in some rare cases, hence the default is -.B off. -.br -.B Note: -Page flipping does not work well in certain configurations with MergedFB. If you -see rendering errors or other strange behavior, disable page flipping. - - -.SH SEE ALSO -XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) -.SH AUTHORS -.nf -Authors include: ... diff --git a/src/ati.c b/src/ati.c deleted file mode 100644 index 5f819813..00000000 --- a/src/ati.c +++ /dev/null @@ -1,72 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ati.c,v 1.23 2003/04/25 14:37:35 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -/*************************************************************************/ - -/* - * Author: Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * This is the ATI driver for XFree86. - * - * John Donne once said "No man is an island", and I am most certainly not an - * exception. Contributions, intentional or not, to this and previous versions - * of this driver by the following are hereby acknowledged: - * - * Thomas Roell, Per Lindqvist, Doug Evans, Rik Faith, Arthur Tateishi, - * Alain Hebert, Ton van Rosmalen, David Chambers, William Shubert, - * ATI Technologies Incorporated, Robert Wolff, David Dawes, Mark Weaver, - * Hans Nasten, Kevin Martin, Frederic Rienthaler, Marc Bolduc, Reuben Sumner, - * Benjamin T. Yang, James Fast Kane, Randall Hopper, W. Marcus Miller, - * Henrik Harmsen, Christian Lupien, Precision Insight Incorporated, - * Mark Vojkovich, Huw D M Davies, Andrew C Aitchison, Ani Joshi, - * Kostas Gewrgiou, Jakub Jelinek, David S. Miller, A E Lawrence, - * Linus Torvalds, William Blew, Ignacio Garcia Etxebarria, Patrick Chase, - * Vladimir Dergachev, Egbert Eich, Mike A. Harris - * - * ... and, many, many others from around the world. - * - * In addition, this work would not have been possible without the active - * support, both moral and otherwise, of the staff and management of Computing - * and Network Services at the University of Alberta, in Edmonton, Alberta, - * Canada. - * - * The driver is intended to support all ATI adapters since their VGA Wonder - * V3, including OEM counterparts. - */ - -#include "atiident.h" -#include "atioption.h" -#include "atiprobe.h" -#include "ativersion.h" - -/* The root of all evil... */ -DriverRec ATI = -{ - ATI_VERSION_CURRENT, - "ati", - ATIIdentify, - ATIProbe, - ATIAvailableOptions, - NULL, - 0 -}; diff --git a/src/ati.h b/src/ati.h deleted file mode 100644 index 3861a9e1..00000000 --- a/src/ati.h +++ /dev/null @@ -1,37 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ati.h,v 1.9 2003/01/01 19:16:30 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATI_H___ -#define ___ATI_H___ 1 - -#include "xf86Pci.h" -#include "xf86PciInfo.h" - -#include "xf86.h" - -#include "xf86_ansic.h" -#include "xf86_OSproc.h" - -extern DriverRec ATI; - -#endif /* ___ATI_H___ */ diff --git a/src/atiaccel.c b/src/atiaccel.c deleted file mode 100644 index 04edd30c..00000000 --- a/src/atiaccel.c +++ /dev/null @@ -1,142 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiaccel.c,v 1.13 2003/04/24 21:19:22 tsi Exp $ */ -/* - * Copyright 2001 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#include "atiaccel.h" -#include "atiadapter.h" -#include "atimach64accel.h" -#include "atistruct.h" - -/* - * ATIInitializeAcceleration -- - * - * This function is called to initialise both the framebuffer manager and XAA - * on a screen. - */ -Bool -ATIInitializeAcceleration -( - ScreenPtr pScreen, - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - int maxScanlines = 32767, maxPixelArea, PixelArea; - - if (pATI->OptionAccel) - { - if (!(pATI->pXAAInfo = XAACreateInfoRec())) - return FALSE; - - switch (pATI->Adapter) - { - case ATI_ADAPTER_MACH64: - maxScanlines = ATIMach64AccelInit(pATI, pATI->pXAAInfo); - break; - - default: - break; - } - } - -#ifndef AVOID_CPIO - - if (!pATI->BankInfo.BankSize) - -#endif /* AVOID_CPIO */ - -#ifdef XF86DRI - - /* If DRI is enabled, we've already set up the FB manager in ATIScreenInit */ - if (!pATI->directRenderingEnabled) - -#endif /* XF86DRI */ - { - /* - * Note: If PixelArea exceeds the engine's maximum, the excess is - * never used, even though it would be useful for such things - * as XVideo buffers. - */ - maxPixelArea = maxScanlines * pScreenInfo->displayWidth; - PixelArea = pScreenInfo->videoRam * 1024 * 8 / pATI->bitsPerPixel; - if (PixelArea > maxPixelArea) - PixelArea = maxPixelArea; - xf86InitFBManagerArea(pScreen, PixelArea, 2); - } - - if (!pATI->OptionAccel || XAAInit(pScreen, pATI->pXAAInfo)) - return TRUE; - - XAADestroyInfoRec(pATI->pXAAInfo); - pATI->pXAAInfo = NULL; - return FALSE; -} - -FBLinearPtr -ATIResizeOffscreenLinear -( - ScreenPtr pScreen, - FBLinearPtr pLinear, - int Size -) -{ - if (Size <= 0) - { - xf86FreeOffscreenLinear(pLinear); - return NULL; - } - - if (pLinear) - { - if ((pLinear->size >= Size) || - xf86ResizeOffscreenLinear(pLinear, Size)) - { - pLinear->MoveLinearCallback = NULL; - pLinear->RemoveLinearCallback = NULL; - return pLinear; - } - - xf86FreeOffscreenLinear(pLinear); - } - - pLinear = xf86AllocateOffscreenLinear(pScreen, Size, 16, NULL, NULL, NULL); - - if (!pLinear) - { - int maxSize; - - xf86QueryLargestOffscreenLinear(pScreen, &maxSize, 16, - PRIORITY_EXTREME); - - if (maxSize < Size) - return NULL; - - xf86PurgeUnlockedOffscreenAreas(pScreen); - pLinear = - xf86AllocateOffscreenLinear(pScreen, Size, 16, NULL, NULL, NULL); - } - - return pLinear; -} diff --git a/src/atiaccel.h b/src/atiaccel.h deleted file mode 100644 index 74cbdecd..00000000 --- a/src/atiaccel.h +++ /dev/null @@ -1,41 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiaccel.h,v 1.5 2003/04/23 21:51:27 tsi Exp $ */ -/* - * Copyright 2001 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIACCEL_H___ -#define ___ATIACCEL_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" -#include "xf86fbman.h" - -extern Bool ATIInitializeAcceleration FunctionPrototype((ScreenPtr, - ScrnInfoPtr, - ATIPtr)); - -extern FBLinearPtr ATIResizeOffscreenLinear FunctionPrototype((ScreenPtr, - FBLinearPtr, - int)); - -#endif /* ___ATIACCEL_H___ */ diff --git a/src/atiadapter.c b/src/atiadapter.c deleted file mode 100644 index 897788ba..00000000 --- a/src/atiadapter.c +++ /dev/null @@ -1,54 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiadapter.c,v 1.17 2003/01/01 19:16:30 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "atiadapter.h" - -/* - * Adapter-related definitions. - */ -const char *ATIAdapterNames[] = -{ - "Unknown", - -#ifndef AVOID_CPIO - - "ATI EGA Wonder800", - "ATI EGA Wonder800+", - "IBM VGA or compatible", - "ATI VGA Basic16", - "ATI VGA Wonder V3", - "ATI VGA Wonder V4", - "ATI VGA Wonder V5", - "ATI VGA Wonder+", - "ATI VGA Wonder XL or XL24", - "ATI VGA Wonder VLB or PCI", - "IBM 8514/A or compatible", - "ATI Mach8", - "ATI Mach32", - -#endif /* AVOID_CPIO */ - - "ATI Mach64", - "ATI Rage128", - "ATI Radeon" -}; diff --git a/src/atiadapter.h b/src/atiadapter.h deleted file mode 100644 index 8db366e8..00000000 --- a/src/atiadapter.h +++ /dev/null @@ -1,60 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiadapter.h,v 1.10 2003/01/01 19:16:30 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIADAPTER_H___ -#define ___ATIADAPTER_H___ 1 - -/* - * Adapter-related definitions. - */ -typedef enum -{ - ATI_ADAPTER_NONE = 0, - -#ifndef AVOID_CPIO - - ATI_ADAPTER_EGA, - ATI_ADAPTER_EGA_PLUS, - ATI_ADAPTER_VGA, - ATI_ADAPTER_BASIC, - ATI_ADAPTER_V3, - ATI_ADAPTER_V4, - ATI_ADAPTER_V5, - ATI_ADAPTER_PLUS, - ATI_ADAPTER_XL, - ATI_ADAPTER_NONISA, - ATI_ADAPTER_8514A, - ATI_ADAPTER_MACH8, - ATI_ADAPTER_MACH32, - -#endif /* AVOID_CPIO */ - - ATI_ADAPTER_MACH64, - ATI_ADAPTER_RAGE128, - ATI_ADAPTER_RADEON, - ATI_ADAPTER_MAX /* Must be last */ -} ATIAdapterType; - -extern const char *ATIAdapterNames[]; - -#endif /* ___ATIADAPTER_H___ */ diff --git a/src/atiadjust.c b/src/atiadjust.c deleted file mode 100644 index 3db016d5..00000000 --- a/src/atiadjust.c +++ /dev/null @@ -1,230 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiadjust.c,v 1.15 2003/04/23 21:51:27 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiadjust.h" -#include "atichip.h" -#include "aticrtc.h" -#include "atilock.h" -#include "atimach64io.h" -#include "atiwonderio.h" - -/* - * The display start address is expressed in units of 32-bit (VGA) or 64-bit - * (accelerator) words where all planar modes are considered as 4bpp modes. - * These functions ensure the start address does not exceed architectural - * limits. Also, to avoid colour changes while panning, these 32-bit or 64-bit - * boundaries may not fall within a pixel. - */ - -/* - * ATIAjustPreInit -- - * - * This function calculates values needed to speed up the setting of the - * display start address. - */ -void -ATIAdjustPreInit -( - ATIPtr pATI -) -{ - unsigned long MaxBase; - -#ifndef AVOID_CPIO - - if ((pATI->CPIO_VGAWonder) && - (pATI->Chip <= ATI_CHIP_18800_1) && - (pATI->VideoRAM == 256) && - (pATI->depth >= 8)) - { - /* Strange, to say the least ... */ - pATI->AdjustDepth = (pATI->bitsPerPixel + 3) >> 2; - pATI->AdjustMask = (unsigned long)(-32); - } - else - -#endif /* AVOID_CPIO */ - - { - pATI->AdjustDepth = (pATI->bitsPerPixel + 7) >> 3; - - pATI->AdjustMask = 64; - while (pATI->AdjustMask % (unsigned long)(pATI->AdjustDepth)) - pATI->AdjustMask += 64; - pATI->AdjustMask = - ~(((pATI->AdjustMask / (unsigned long)(pATI->AdjustDepth)) >> 3) - - 1); - } - - switch (pATI->NewHW.crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - if (pATI->Chip >= ATI_CHIP_264CT) - { - pATI->AdjustMaxBase = MaxBits(CRTC_OFFSET_VGA) << 2; - if (pATI->depth <= 4) - pATI->AdjustMaxBase <<= 1; - } - else if (!pATI->CPIO_VGAWonder) - { - pATI->AdjustMaxBase = 0xFFFFU << 3; - } - else if (pATI->Chip <= ATI_CHIP_28800_6) - { - pATI->AdjustMaxBase = 0x03FFFFU << 3; - } - else /* Mach32 & Mach64 */ - { - pATI->AdjustMaxBase = 0x0FFFFFU << 3; - } - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - pATI->AdjustMaxBase = MaxBits(CRTC_OFFSET) << 3; - break; - - default: - pATI->AdjustMaxBase = 0; - break; - } - - MaxBase = (pATI->AdjustMaxBase / (unsigned long)pATI->AdjustDepth) | - ~pATI->AdjustMask; - - pATI->AdjustMaxX = MaxBase % pATI->displayWidth; - pATI->AdjustMaxY = MaxBase / pATI->displayWidth; -} - -/* - * ATIAdjustFrame -- - * - * This function is used to initialise the SVGA Start Address - the first - * displayed location in video memory. This is used to implement the virtual - * window. - */ -void -ATIAdjustFrame -( - int scrnIndex, - int x, - int y, - int flags -) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[scrnIndex]; - ATIPtr pATI = ATIPTR(pScreenInfo); - int Base, xy; - - /* - * Assume the caller has already done its homework in ensuring the physical - * screen is still contained in the virtual resolution. - */ - if (y >= pATI->AdjustMaxY) - { - y = pATI->AdjustMaxY; - if (x > pATI->AdjustMaxX) - y--; - } - - Base = ((((y * pATI->displayWidth) + x) & pATI->AdjustMask) * - pATI->AdjustDepth) >> 3; - - if (!pATI->currentMode) - { - /* - * Not in DGA. This reverse-calculates pScreenInfo->frame[XY][01] so - * that the cursor does not move on mode switches. - */ - xy = (Base << 3) / pATI->AdjustDepth; - pScreenInfo->frameX0 = xy % pATI->displayWidth; - pScreenInfo->frameY0 = xy / pATI->displayWidth; - pScreenInfo->frameX1 = - pScreenInfo->frameX0 + pScreenInfo->currentMode->HDisplay - 1; - pScreenInfo->frameY1 = - pScreenInfo->frameY0 + pScreenInfo->currentMode->VDisplay - 1; - } - - /* Unlock registers */ - ATIUnlock(pATI); - -#ifndef AVOID_CPIO - - if ((pATI->NewHW.crtc == ATI_CRTC_VGA) && (pATI->Chip < ATI_CHIP_264CT)) - { - PutReg(CRTX(pATI->CPIO_VGABase), 0x0CU, GetByte(Base, 1)); - PutReg(CRTX(pATI->CPIO_VGABase), 0x0DU, GetByte(Base, 0)); - - if (pATI->CPIO_VGAWonder) - { - if (pATI->Chip <= ATI_CHIP_18800_1) - ATIModifyExtReg(pATI, 0xB0U, -1, 0x3FU, Base >> 10); - else - { - ATIModifyExtReg(pATI, 0xB0U, -1, 0xBFU, Base >> 10); - ATIModifyExtReg(pATI, 0xA3U, -1, 0xEFU, Base >> 13); - - /* - * I don't know if this also applies to Mach64's, but give it a - * shot... - */ - if (pATI->Chip >= ATI_CHIP_68800) - ATIModifyExtReg(pATI, 0xADU, -1, 0xF3U, Base >> 16); - } - } - } - else - /* - * On integrated controllers, there is only one set of CRTC control bits, - * many of which are simultaneously accessible through both VGA and - * accelerator I/O ports. Given VGA's architectural limitations, setting - * the CRTC's offset register to more than 256k needs to be done through - * the accelerator port. - */ - if (pATI->depth <= 4) - { - outr(CRTC_OFF_PITCH, SetBits(pATI->displayWidth >> 4, CRTC_PITCH) | - SetBits(Base, CRTC_OFFSET)); - } - else - -#endif /* AVOID_CPIO */ - - { - -#ifndef AVOID_CPIO - - if (pATI->NewHW.crtc == ATI_CRTC_VGA) - Base <<= 1; /* LSBit must be zero */ - -#endif /* AVOID_CPIO */ - - outr(CRTC_OFF_PITCH, SetBits(pATI->displayWidth >> 3, CRTC_PITCH) | - SetBits(Base, CRTC_OFFSET)); - } -} diff --git a/src/atiadjust.h b/src/atiadjust.h deleted file mode 100644 index 0ac15ae2..00000000 --- a/src/atiadjust.h +++ /dev/null @@ -1,33 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiadjust.h,v 1.8 2003/01/01 19:16:30 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIADJUST_H___ -#define ___ATIADJUST_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -extern void ATIAdjustPreInit FunctionPrototype((ATIPtr)); -extern void ATIAdjustFrame FunctionPrototype((int, int, int, int)); - -#endif /* ___ATIADJUST_H___ */ diff --git a/src/atiaudio.c b/src/atiaudio.c deleted file mode 100644 index ada83301..00000000 --- a/src/atiaudio.c +++ /dev/null @@ -1,47 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiaudio.c,v 1.1 2003/07/24 22:08:27 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "atiaudio.h" - -/* - * Audio chip definitions. - */ -const char *ATIAudioNames[] = -{ - "Philips TEA5582", - "Mono with audio mux", - "Philips TDA9850", - "Sony CXA2020S", - "ITT MSP3410D", - "Crystal CS4236B", - "Philips TDA9851", - "ITT MSP3415", - "ITT MSP3430", - "Unknown type (9)", - "Unknown type (10)", - "Unknown type (11)", - "Unknown type (12)", - "Unknown type (13)", - "Unknown type (14)", - "No audio" -}; diff --git a/src/atiaudio.h b/src/atiaudio.h deleted file mode 100644 index 19080d2b..00000000 --- a/src/atiaudio.h +++ /dev/null @@ -1,52 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiaudio.h,v 1.1 2003/07/24 22:08:27 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIAUDIO_H___ -#define ___ATIAUDIO_H___ 1 - -/* - * Audio chip definitions. - */ -typedef enum -{ - ATI_AUDIO_TEA5582, - ATI_AUDIO_MONO, - ATI_AUDIO_TDA9850, - ATI_AUDIO_CXA2020S, - ATI_AUDIO_MSP3410D, - ATI_AUDIO_CS4236B, - ATI_AUDIO_TDA9851, - ATI_AUDIO_MSP3415, - ATI_AUDIO_MSP3430, - ATI_AUDIO_9, - ATI_AUDIO_10, - ATI_AUDIO_11, - ATI_AUDIO_12, - ATI_AUDIO_13, - ATI_AUDIO_14, - ATI_AUDIO_NONE -} ATIAudioType; - -extern const char *ATIAudioNames[]; - -#endif /* ___ATIAUDIO_H___ */ diff --git a/src/atibank.c b/src/atibank.c deleted file mode 100644 index 82d591ac..00000000 --- a/src/atibank.c +++ /dev/null @@ -1,409 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atibank.c,v 1.12 2003/01/01 19:16:30 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atibank.h" -#include "atimach64io.h" -#include "atiwonderio.h" - -#ifndef AVOID_CPIO - -/* - * ATI VGA Wonder V3 adapters use an ATI 18800 chip and are single-banked. - * Bank selection is done with bits 0x1E of ATI extended VGA register index - * 0xB2. - */ - -/* - * ATIV3SetBank -- - * - * Set an ATI 18800's bank number. - */ -void -ATIV3SetBank -( - ATIPtr pATI, - unsigned int iBank -) -{ - ATIModifyExtReg(pATI, 0xB2U, -1, (CARD8)(~0x1EU), SetBits(iBank, 0x1EU)); -} - -/* - * ATIV3SetReadWrite -- - * - * Set an ATI 18800's bank number. - */ -int -ATIV3SetReadWrite -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIPtr pATI = ATIPTR(XF86SCRNINFO(pScreen)); - - ATIModifyExtReg(pATI, 0xB2U, -1, (CARD8)(~0x1EU), SetBits(iBank, 0x1EU)); - return 0; -} - -/* - * ATI VGA Wonder V4 and V5 adapters use an ATI 18800-1 chip. Bank selection - * is done with ATI extended VGA register index 0xB2. The format is: - * - * 0xE0 - Read bank select bits 0x07 - * 0x1E - Write bank select bits 0x0F - * 0x01 - Read bank select bit 0x08. - */ - -/* - * ATIV4V5SetBank -- - * - * Set an ATI 18800-1's read and write bank numbers. - */ -void -ATIV4V5SetBank -( - ATIPtr pATI, - unsigned int iBank -) -{ - pATI->B2Reg = SetBits(iBank, 0x1EU) | SetBits(iBank, 0xE0U) | - SetBits(GetBits(iBank, 0x08U), 0x01U); - ATIPutExtReg(0xB2U, pATI->B2Reg); -} - -/* - * ATIV4V5SetRead -- - * - * Set an ATI 18800-1's read bank number. - */ -int -ATIV4V5SetRead -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIPtr pATI = ATIPTR(XF86SCRNINFO(pScreen)); - CARD8 B2Reg = (pATI->B2Reg & 0x1EU) | SetBits(iBank, 0xE0U) | - SetBits(GetBits(iBank, 0x08U), 0x01U); - - if (B2Reg != pATI->B2Reg) - { - ATIPutExtReg(0xB2U, B2Reg); - pATI->B2Reg = B2Reg; - } - - return 0; -} - -/* - * ATIV4V5SetWrite -- - * - * Set an ATI 18800-1's write bank number. - */ -int -ATIV4V5SetWrite -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIPtr pATI = ATIPTR(XF86SCRNINFO(pScreen)); - CARD8 B2Reg = (pATI->B2Reg & 0xE1U) | SetBits(iBank, 0x1EU); - - if (B2Reg != pATI->B2Reg) - { - ATIPutExtReg(0xB2U, B2Reg); - pATI->B2Reg = B2Reg; - } - return 0; -} - -/* - * ATIV4V5SetReadWrite -- - * - * Set an ATI 18800-1's read and write bank numbers. - */ -int -ATIV4V5SetReadWrite -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIV4V5SetBank(ATIPTR(XF86SCRNINFO(pScreen)), iBank); - return 0; -} - -/* - * In addition to ATI extended register index 0xB2, 28800's, 68800's and - * 88800's define banking bits in bits 0x0F of ATI extended VGA register index - * 0xAE. These are only needed for adapters with more than 1MB of video - * memory, and it is questionable whether or not they are actually implemented - * by 28800's and 88800's. ATI extended VGA register index 0xAE is defined as - * follows: - * - * 0xF0 - reserved - * 0x0C - read bank select bits 0x30 - * 0x03 - write bank select bits 0x30 - */ - -/* - * ATIx8800SetBank -- - * - * Set an ATI 28800's, 68800's or 88800's read and write bank numbers. - */ -void -ATIx8800SetBank -( - ATIPtr pATI, - unsigned int iBank -) -{ - ATIV4V5SetBank(pATI, iBank); - iBank = GetBits(iBank, 0x30U); - ATIModifyExtReg(pATI, 0xAEU, -1, (CARD8)(~0x0FU), - SetBits(iBank, 0x03U) | SetBits(iBank, 0x0CU)); -} - -/* - * ATIx8800SetRead -- - * - * Set an ATI 28800's, 68800's or 88800's read bank numbers. - */ -int -ATIx8800SetRead -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - (void)ATIV4V5SetRead(pScreen, iBank); - ATIModifyExtReg(ATIPTR(XF86SCRNINFO(pScreen)), 0xAEU, -1, (CARD8)(~0x0CU), - SetBits(GetBits(iBank, 0x30U), 0x0CU)); - return 0; -} - -/* - * ATIx8800SetWrite -- - * - * Set an ATI 28800's, 68800's or 88800's write bank numbers. - */ -int -ATIx8800SetWrite -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - (void)ATIV4V5SetWrite(pScreen, iBank); - ATIModifyExtReg(ATIPTR(XF86SCRNINFO(pScreen)), 0xAEU, -1, (CARD8)(~0x03U), - SetBits(GetBits(iBank, 0x30U), 0x03U)); - return 0; -} - -/* - * ATIx8800SetReadWrite -- - * - * Set an ATI 28800's, 68800's or 88800's read and write bank numbers. - */ -int -ATIx8800SetReadWrite -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIx8800SetBank(ATIPTR(XF86SCRNINFO(pScreen)), iBank); - return 0; -} - -/* - * Functions to simulate a banked VGA aperture using a Mach64's small dual - * paged apertures. There are two sets of these: one for packed modes, the - * other for planar modes. - */ - -static CARD32 -ATIMach64MassagePackedBankNumber -( - CARD8 iBank -) -{ - iBank <<= 1; - return ((iBank + 1) << 16) | iBank; -} - -/* - * ATIMach64SetBankPacked -- - * - * Set read and write bank numbers for small dual paged apertures. - */ -void -ATIMach64SetBankPacked -( - ATIPtr pATI, - unsigned int iBank -) -{ - CARD32 tmp = ATIMach64MassagePackedBankNumber(iBank); - - outr(MEM_VGA_RP_SEL, tmp); - outr(MEM_VGA_WP_SEL, tmp); -} - -/* - * ATIMach64SetReadPacked -- - * - * Set read bank number for small dual paged apertures. - */ -int -ATIMach64SetReadPacked -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIPtr pATI = ATIPTR(XF86SCRNINFO(pScreen)); - - outr(MEM_VGA_RP_SEL, ATIMach64MassagePackedBankNumber(iBank)); - return 0; -} - -/* - * ATIMach64SetWritePacked -- - * - * Set write bank number for small dual paged apertures. - */ -int -ATIMach64SetWritePacked -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIPtr pATI = ATIPTR(XF86SCRNINFO(pScreen)); - - outr(MEM_VGA_WP_SEL, ATIMach64MassagePackedBankNumber(iBank)); - return 0; -} - -/* - * ATIMach64SetReadWritePacked -- - * - * Set read and write bank numbers for small dual paged apertures. - */ -int -ATIMach64SetReadWritePacked -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIMach64SetBankPacked(ATIPTR(XF86SCRNINFO(pScreen)), iBank); - return 0; -} - -static CARD32 -ATIMach64MassagePlanarBankNumber -( - CARD8 iBank -) -{ - iBank <<= 3; - return ((iBank + 4) << 16) | iBank; -} - -/* - * ATIMach64SetBankPlanar -- - * - * Set read and write bank numbers for small dual paged apertures. - */ -void -ATIMach64SetBankPlanar -( - ATIPtr pATI, - unsigned int iBank -) -{ - CARD32 tmp = ATIMach64MassagePlanarBankNumber(iBank); - - outr(MEM_VGA_RP_SEL, tmp); - outr(MEM_VGA_WP_SEL, tmp); -} - -/* - * ATIMach64SetReadPlanar -- - * - * Set read bank number for small dual paged apertures. - */ -int -ATIMach64SetReadPlanar -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIPtr pATI = ATIPTR(XF86SCRNINFO(pScreen)); - - outr(MEM_VGA_RP_SEL, ATIMach64MassagePlanarBankNumber(iBank)); - return 0; -} - -/* - * ATIMach64SetWritePlanar -- - * - * Set write bank number for small dual paged apertures. - */ -int -ATIMach64SetWritePlanar -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIPtr pATI = ATIPTR(XF86SCRNINFO(pScreen)); - - outr(MEM_VGA_WP_SEL, ATIMach64MassagePlanarBankNumber(iBank)); - return 0; -} - -/* - * ATIMach64SetReadWritePlanar -- - * - * Set read and write bank numbers for small dual paged apertures. - */ -int -ATIMach64SetReadWritePlanar -( - ScreenPtr pScreen, - unsigned int iBank -) -{ - ATIMach64SetBankPlanar(ATIPTR(XF86SCRNINFO(pScreen)), iBank); - return 0; -} - -#endif /* AVOID_CPIO */ diff --git a/src/atibank.h b/src/atibank.h deleted file mode 100644 index 43a91acd..00000000 --- a/src/atibank.h +++ /dev/null @@ -1,88 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atibank.h,v 1.8 2003/01/01 19:16:30 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIBANK_H___ -#define ___ATIBANK_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "mibank.h" - -#ifndef AVOID_CPIO - -/* - * Banking definitions. - */ - -/* - * Bank selection function for VGA Wonder V3 adapters (which are - * single-banked). - */ -#define ATIV3SetRead ATIV3SetReadWrite -#define ATIV3SetWrite ATIV3SetReadWrite -extern miBankProc ATIV3SetReadWrite; - -/* - * Bank selection functions for VGA Wonder V4 and V5 adapters. - */ -extern miBankProc ATIV4V5SetRead, - ATIV4V5SetWrite, - ATIV4V5SetReadWrite; - -/* - * Bank selection functions for 28800-x, 68800-x and 88800 based adapters. - */ -extern miBankProc ATIx8800SetRead, - ATIx8800SetWrite, - ATIx8800SetReadWrite; - -/* - * Bank selection functions used to simulate a banked VGA aperture with a - * Mach64's small dual paged apertures. There are two sets of these: one for - * packed modes, and one for planar modes. - */ -extern miBankProc ATIMach64SetReadPacked, - ATIMach64SetWritePacked, - ATIMach64SetReadWritePacked; -extern miBankProc ATIMach64SetReadPlanar, - ATIMach64SetWritePlanar, - ATIMach64SetReadWritePlanar; - -/* - * The CRT save/restore code also needs a separate banking interface that can - * used before ATIScreenInit() is called. - */ - -typedef void ATIBankProc FunctionPrototype((ATIPtr, unsigned int)); -typedef ATIBankProc *ATIBankProcPtr; - -extern ATIBankProc ATIV3SetBank, - ATIV4V5SetBank, - ATIx8800SetBank, - ATIMach64SetBankPacked, - ATIMach64SetBankPlanar; - -#endif /* AVOID_CPIO */ - -#endif /* ___ATIBANK_H___ */ diff --git a/src/atibus.c b/src/atibus.c deleted file mode 100644 index c06c6966..00000000 --- a/src/atibus.c +++ /dev/null @@ -1,183 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atibus.c,v 1.18 2003/01/22 21:44:10 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atibus.h" -#include "atichip.h" -#include "atiio.h" -#include "atistruct.h" -#include "ativersion.h" - -/* - * Definitions related to an adapter's system bus interface. - */ - -const char *ATIBusNames[] = -{ - "16-Bit ISA", - "EISA", - "16-Bit MicroChannel", - "32-Bit MicroChannel", - "386SX Local Bus", - "386DX Local Bus", - "VESA Local Bus", - "PCI", - "AGP" -}; - -/* - * ATIClaimResources -- - * - * This function registers most of the bus resources used by an adapter. The - * exceptions are PCI-configured resources and non-PCI non-AGP linear - * apertures, both of which are registered by ATIPreInit(). This function also - * attempts to register unshareable resources for inactive PCI adapters, - * whether or not they are relocatable. - */ -static void -ATIClaimResources -( - ATIPtr pATI, - Bool Active -) -{ - resPtr pResources; - -#ifndef AVOID_CPIO - - resRange Resources[2] = {{0, 0, 0}, _END}; - - /* Claim VGA and VGAWonder resources */ - if ((pATI->VGAAdapter != ATI_ADAPTER_NONE) && (Active || !pATI->SharedVGA)) - { - /* - * 18800-x's are the only ATI controllers that decode all ISA aliases - * of VGA and VGA Wonder I/O ports. Other x8800's do not decode >any< - * VGA aliases, but do decode VGA Wonder aliases whose most significant - * nibble is zero. - */ - xf86ClaimFixedResources( - (pATI->Chip <= ATI_CHIP_18800_1) ? - (pATI->SharedVGA ? resVgaSparseShared : resVgaSparseExclusive) : - (pATI->SharedVGA ? resVgaShared : resVgaExclusive), - pATI->iEntity); - - if (pATI->CPIO_VGAWonder) - { - if (pATI->SharedVGA) - Resources[0].type = ResShrIoSparse | ResBus; - else - Resources[0].type = ResExcIoSparse | ResBus; - Resources[0].rBase = pATI->CPIO_VGAWonder; - if (pATI->Chip <= ATI_CHIP_18800_1) - Resources[0].rMask = 0x03FEU; - else - Resources[0].rMask = 0xF3FEU; - - xf86ClaimFixedResources(Resources, pATI->iEntity); - - (void)memcpy(pATI->VGAWonderResources, - Resources, SizeOf(Resources)); - } - } - - if (!Active && pATI->SharedAccelerator) - return; - - /* Claim 8514/A resources */ - if (pATI->ChipHasSUBSYS_CNTL) - xf86ClaimFixedResources( - pATI->SharedAccelerator ? res8514Shared : res8514Exclusive, - pATI->iEntity); - - /* Claim Mach64 sparse I/O resources */ - if ((pATI->Adapter == ATI_ADAPTER_MACH64) && - (pATI->CPIODecoding == SPARSE_IO)) - { - if (pATI->SharedAccelerator) - Resources[0].type = ResShrIoSparse | ResBus; - else - Resources[0].type = ResExcIoSparse | ResBus; - Resources[0].rBase = pATI->CPIOBase; - Resources[0].rMask = 0x03FCU; - - xf86ClaimFixedResources(Resources, pATI->iEntity); - } - - if (Active) - return; - -#else /* AVOID_CPIO */ - - if (pATI->SharedAccelerator) - return; - -#endif /* AVOID_CPIO */ - - /* Register unshared relocatable resources for inactive adapters */ - do - { - pResources = xf86RegisterResources(pATI->iEntity, NULL, ResExclusive); - if (!pResources) - return; - - pResources = xf86ReallocatePciResources(pATI->iEntity, pResources); - } while (!pResources); - - xf86Msg(X_WARNING, - ATI_NAME ": Unable to register the following resources for inactive" - " adapter:\n"); - xf86PrintResList(1, pResources); - xf86FreeResList(pResources); -} - -/* - * ATIClaimBusSlot -- - * - * Claim an adapter and register its resources. - */ -int -ATIClaimBusSlot -( - DriverPtr pDriver, - int Chipset, - GDevPtr pGDev, - Bool Active, - ATIPtr pATI -) -{ - pciVideoPtr pVideo = pATI->PCIInfo; - - if (pVideo) - pATI->iEntity = - xf86ClaimPciSlot(pVideo->bus, pVideo->device, pVideo->func, - pDriver, Chipset, pGDev, Active); - else - pATI->iEntity = xf86ClaimIsaSlot(pDriver, Chipset, pGDev, Active); - - if (pATI->iEntity >= 0) - ATIClaimResources(pATI, Active); - - return pATI->iEntity; -} diff --git a/src/atibus.h b/src/atibus.h deleted file mode 100644 index c5f35e08..00000000 --- a/src/atibus.h +++ /dev/null @@ -1,59 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atibus.h,v 1.11 2003/01/01 19:16:30 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIBUS_H___ - -#if !defined(___ATI_H___) && defined(XFree86Module) -# error missing #include "ati.h" before #include "atibus.h" -# undef XFree86Module -#endif - -#define ___ATIBUS_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -/* - * Definitions related to an adapter's system bus interface. - */ -typedef enum -{ - ATI_BUS_ISA = 0, - ATI_BUS_EISA, - ATI_BUS_MCA16, - ATI_BUS_MCA32, - ATI_BUS_SXLB, - ATI_BUS_DXLB, - ATI_BUS_VLB, - ATI_BUS_PCI, - ATI_BUS_AGP -} ATIBusType; - -extern const char *ATIBusNames[]; - -extern int ATIClaimBusSlot FunctionPrototype((DriverPtr, int, GDevPtr, Bool, - ATIPtr)); - -#endif /* ___ATIBUS_H___ */ diff --git a/src/atichip.c b/src/atichip.c deleted file mode 100644 index 3c2b094a..00000000 --- a/src/atichip.c +++ /dev/null @@ -1,746 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atichip.c,v 1.37 2003/10/07 22:47:11 martin Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atibus.h" -#include "atichip.h" -#include "atimach64io.h" -#include "ativersion.h" - -/* - * Chip-related definitions. - */ -const char *ATIChipNames[] = -{ - "Unknown", - -#ifndef AVOID_CPIO - - "IBM VGA or compatible", - "ATI 18800", - "ATI 18800-1", - "ATI 28800-2", - "ATI 28800-4", - "ATI 28800-5", - "ATI 28800-6", - "IBM 8514/A", - "Chips & Technologies 82C480", - "ATI 38800-1", - "ATI 68800", - "ATI 68800-3", - "ATI 68800-6", - "ATI 68800LX", - "ATI 68800AX", - -#endif /* AVOID_CPIO */ - - "ATI 88800GX-C", - "ATI 88800GX-D", - "ATI 88800GX-E", - "ATI 88800GX-F", - "ATI 88800GX", - "ATI 88800CX", - "ATI 264CT", - "ATI 264ET", - "ATI 264VT", - "ATI 3D Rage", - "ATI 264VT-B", - "ATI 3D Rage II", - "ATI 264VT3", - "ATI 3D Rage II+DVD", - "ATI 3D Rage LT", - "ATI 264VT4", - "ATI 3D Rage IIc", - "ATI 3D Rage Pro", - "ATI 3D Rage LT Pro", - "ATI 3D Rage XL or XC", - "ATI 3D Rage Mobility", - "ATI unknown Mach64", - "ATI Rage 128 GL", - "ATI Rage 128 VR", - "ATI Rage 128 Pro GL", - "ATI Rage 128 Pro VR", - "ATI Rage 128 Pro ULTRA", - "ATI Rage 128 Mobility M3", - "ATI Rage 128 Mobility M4", - "ATI unknown Rage 128" - "ATI Radeon 7200", - "ATI Radeon 7000 (VE)", - "ATI Radeon Mobility M6", - "ATI Radeon IGP320", - "ATI Radeon IGP330/340/350", - "ATI Radeon 7000 IGP", - "ATI Radeon 7500", - "ATI Radeon Mobility M7", - "ATI Radeon 8500/9100", - "ATI Radeon 9000", - "ATI Radeon Mobility M9", - "ATI Radeon 9000 IGP", - "ATI Radeon 9200", - "ATI Radeon Mobility M9+", - "ATI Radeon 9700/9500", - "ATI Radeon 9600", - "ATI Radeon 9800", - "ATI Radeon 9800XT", - "ATI Rage HDTV" -}; - -const char *ATIFoundryNames[] = - { "SGS", "NEC", "KCS", "UMC", "TSMC", "5", "6", "UMC" }; - -#ifndef AVOID_CPIO - -/* - * ATIMach32ChipID -- - * - * Set variables whose value is dependent upon an 68800's CHIP_ID register. - */ -void -ATIMach32ChipID -( - ATIPtr pATI -) -{ - CARD16 IOValue = inw(CHIP_ID); - pATI->ChipType = GetBits(IOValue, CHIP_CODE_0 | CHIP_CODE_1); - pATI->ChipClass = GetBits(IOValue, CHIP_CLASS); - pATI->ChipRevision = GetBits(IOValue, CHIP_REV); - pATI->ChipRev = pATI->ChipRevision; - if (IOValue == 0xFFFFU) - IOValue = 0; - switch (GetBits(IOValue, CHIP_CODE_0 | CHIP_CODE_1)) - { - case OldChipID('A', 'A'): - pATI->Chip = ATI_CHIP_68800_3; - break; - - case OldChipID('X', 'X'): - pATI->Chip = ATI_CHIP_68800_6; - break; - - case OldChipID('L', 'X'): - pATI->Chip = ATI_CHIP_68800LX; - break; - - case OldChipID('A', 'X'): - pATI->Chip = ATI_CHIP_68800AX; - break; - - default: - pATI->Chip = ATI_CHIP_68800; - break; - } -} - -#endif /* AVOID_CPIO */ - -/* - * ATIMach64ChipID -- - * - * Set variables whose value is dependent upon a Mach64's CONFIG_CHIP_ID - * register. - */ -void -ATIMach64ChipID -( - ATIPtr pATI, - const CARD16 ExpectedChipType -) -{ - pATI->config_chip_id = inr(CONFIG_CHIP_ID); - pATI->ChipType = GetBits(pATI->config_chip_id, 0xFFFFU); - pATI->ChipClass = GetBits(pATI->config_chip_id, CFG_CHIP_CLASS); - pATI->ChipRevision = GetBits(pATI->config_chip_id, CFG_CHIP_REV); - pATI->ChipVersion = GetBits(pATI->config_chip_id, CFG_CHIP_VERSION); - pATI->ChipFoundry = GetBits(pATI->config_chip_id, CFG_CHIP_FOUNDRY); - pATI->ChipRev = pATI->ChipRevision; - switch (pATI->ChipType) - { - case OldChipID('G', 'X'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('G', 'X'): - switch (pATI->ChipRevision) - { - case 0x00U: - pATI->Chip = ATI_CHIP_88800GXC; - break; - - case 0x01U: - pATI->Chip = ATI_CHIP_88800GXD; - break; - - case 0x02U: - pATI->Chip = ATI_CHIP_88800GXE; - break; - - case 0x03U: - pATI->Chip = ATI_CHIP_88800GXF; - break; - - default: - pATI->Chip = ATI_CHIP_88800GX; - break; - } - break; - - case OldChipID('C', 'X'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('C', 'X'): - pATI->Chip = ATI_CHIP_88800CX; - break; - - case OldChipID('C', 'T'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('C', 'T'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264CT; - pATI->BusType = ATI_BUS_PCI; - break; - - case OldChipID('E', 'T'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('E', 'T'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264ET; - pATI->BusType = ATI_BUS_PCI; - break; - - case OldChipID('V', 'T'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('V', 'T'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264VT; - pATI->BusType = ATI_BUS_PCI; - /* Some early GT's are detected as VT's */ - if (ExpectedChipType && (pATI->ChipType != ExpectedChipType)) - { - if (ExpectedChipType == NewChipID('G', 'T')) - pATI->Chip = ATI_CHIP_264GT; - else - xf86Msg(X_WARNING, - ATI_NAME ": Mach64 chip type probe discrepancy" - " detected: PCI=0x%04X; CHIP_ID=0x%04X.\n", - ExpectedChipType, pATI->ChipType); - } - else if (pATI->ChipVersion) - pATI->Chip = ATI_CHIP_264VTB; - break; - - case OldChipID('G', 'T'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('G', 'T'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->BusType = ATI_BUS_PCI; - if (!pATI->ChipVersion) - pATI->Chip = ATI_CHIP_264GT; - else - pATI->Chip = ATI_CHIP_264GTB; - break; - - case OldChipID('V', 'U'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('V', 'U'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264VT3; - pATI->BusType = ATI_BUS_PCI; - break; - - case OldChipID('G', 'U'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('G', 'U'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264GTDVD; - pATI->BusType = ATI_BUS_PCI; - break; - - case OldChipID('L', 'G'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('L', 'G'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264LT; - pATI->BusType = ATI_BUS_PCI; - break; - - case OldChipID('V', 'V'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('V', 'V'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264VT4; - pATI->BusType = ATI_BUS_PCI; - break; - - case OldChipID('G', 'V'): - case OldChipID('G', 'Y'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('G', 'V'): - case NewChipID('G', 'Y'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264GT2C; - pATI->BusType = ATI_BUS_PCI; - break; - - case OldChipID('G', 'W'): - case OldChipID('G', 'Z'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('G', 'W'): - case NewChipID('G', 'Z'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264GT2C; - pATI->BusType = ATI_BUS_AGP; - break; - - case OldChipID('G', 'I'): - case OldChipID('G', 'P'): - case OldChipID('G', 'Q'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('G', 'I'): - case NewChipID('G', 'P'): - case NewChipID('G', 'Q'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264GTPRO; - pATI->BusType = ATI_BUS_PCI; - break; - - case OldChipID('G', 'B'): - case OldChipID('G', 'D'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('G', 'B'): - case NewChipID('G', 'D'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264GTPRO; - pATI->BusType = ATI_BUS_AGP; - break; - - case OldChipID('L', 'I'): - case OldChipID('L', 'P'): - case OldChipID('L', 'Q'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('L', 'I'): - case NewChipID('L', 'P'): - case NewChipID('L', 'Q'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264LTPRO; - pATI->BusType = ATI_BUS_PCI; - pATI->LCDVBlendFIFOSize = 800; - break; - - case OldChipID('L', 'B'): - case OldChipID('L', 'D'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('L', 'B'): - case NewChipID('L', 'D'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264LTPRO; - pATI->BusType = ATI_BUS_AGP; - pATI->LCDVBlendFIFOSize = 800; - break; - - case OldChipID('G', 'L'): - case OldChipID('G', 'O'): - case OldChipID('G', 'R'): - case OldChipID('G', 'S'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('G', 'L'): - case NewChipID('G', 'O'): - case NewChipID('G', 'R'): - case NewChipID('G', 'S'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264XL; - pATI->BusType = ATI_BUS_PCI; - pATI->LCDVBlendFIFOSize = 1024; - break; - - case OldChipID('G', 'M'): - case OldChipID('G', 'N'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('G', 'M'): - case NewChipID('G', 'N'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_264XL; - pATI->BusType = ATI_BUS_AGP; - pATI->LCDVBlendFIFOSize = 1024; - break; - - case OldChipID('L', 'R'): - case OldChipID('L', 'S'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('L', 'R'): - case NewChipID('L', 'S'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_MOBILITY; - pATI->BusType = ATI_BUS_PCI; - pATI->LCDVBlendFIFOSize = 1024; - break; - - case OldChipID('L', 'M'): - case OldChipID('L', 'N'): - pATI->ChipType = OldToNewChipID(pATI->ChipType); - case NewChipID('L', 'M'): - case NewChipID('L', 'N'): - pATI->ChipRevision = - GetBits(pATI->config_chip_id, CFG_CHIP_REVISION); - pATI->Chip = ATI_CHIP_MOBILITY; - pATI->BusType = ATI_BUS_AGP; - pATI->LCDVBlendFIFOSize = 1024; - break; - - default: - pATI->Chip = ATI_CHIP_Mach64; - break; - } -} - -/* - * ATIChipID -- - * - * This returns the ATI_CHIP_* value (generally) associated with a particular - * ChipID/ChipRev combination. - */ -ATIChipType -ATIChipID -( - const CARD16 ChipID, - const CARD8 ChipRev -) -{ - switch (ChipID) - { - -#ifndef AVOID_CPIO - - case OldChipID('A', 'A'): case NewChipID('A', 'A'): - return ATI_CHIP_68800_3; - - case OldChipID('X', 'X'): case NewChipID('X', 'X'): - return ATI_CHIP_68800_6; - - case OldChipID('L', 'X'): - return ATI_CHIP_68800LX; - - case OldChipID('A', 'X'): case NewChipID('A', 'X'): - return ATI_CHIP_68800AX; - -#endif /* AVOID_CPIO */ - - case OldChipID('G', 'X'): case NewChipID('G', 'X'): - switch (ChipRev) - { - case 0x00U: - return ATI_CHIP_88800GXC; - - case 0x01U: - return ATI_CHIP_88800GXD; - - case 0x02U: - return ATI_CHIP_88800GXE; - - case 0x03U: - return ATI_CHIP_88800GXF; - - default: - return ATI_CHIP_88800GX; - } - - case OldChipID('C', 'X'): case NewChipID('C', 'X'): - return ATI_CHIP_88800CX; - - case OldChipID('C', 'T'): case NewChipID('C', 'T'): - return ATI_CHIP_264CT; - - case OldChipID('E', 'T'): case NewChipID('E', 'T'): - return ATI_CHIP_264ET; - - case OldChipID('V', 'T'): case NewChipID('V', 'T'): - /* For simplicity, ignore ChipID discrepancy that can occur here */ - if (!(ChipRev & GetBits(CFG_CHIP_VERSION, CFG_CHIP_REV))) - return ATI_CHIP_264VT; - return ATI_CHIP_264VTB; - - case OldChipID('G', 'T'): case NewChipID('G', 'T'): - if (!(ChipRev & GetBits(CFG_CHIP_VERSION, CFG_CHIP_REV))) - return ATI_CHIP_264GT; - return ATI_CHIP_264GTB; - - case OldChipID('V', 'U'): case NewChipID('V', 'U'): - return ATI_CHIP_264VT3; - - case OldChipID('G', 'U'): case NewChipID('G', 'U'): - return ATI_CHIP_264GTDVD; - - case OldChipID('L', 'G'): case NewChipID('L', 'G'): - return ATI_CHIP_264LT; - - case OldChipID('V', 'V'): case NewChipID('V', 'V'): - return ATI_CHIP_264VT4; - - case OldChipID('G', 'V'): case NewChipID('G', 'V'): - case OldChipID('G', 'W'): case NewChipID('G', 'W'): - case OldChipID('G', 'Y'): case NewChipID('G', 'Y'): - case OldChipID('G', 'Z'): case NewChipID('G', 'Z'): - return ATI_CHIP_264GT2C; - - case OldChipID('G', 'B'): case NewChipID('G', 'B'): - case OldChipID('G', 'D'): case NewChipID('G', 'D'): - case OldChipID('G', 'I'): case NewChipID('G', 'I'): - case OldChipID('G', 'P'): case NewChipID('G', 'P'): - case OldChipID('G', 'Q'): case NewChipID('G', 'Q'): - return ATI_CHIP_264GTPRO; - - case OldChipID('L', 'B'): case NewChipID('L', 'B'): - case OldChipID('L', 'D'): case NewChipID('L', 'D'): - case OldChipID('L', 'I'): case NewChipID('L', 'I'): - case OldChipID('L', 'P'): case NewChipID('L', 'P'): - case OldChipID('L', 'Q'): case NewChipID('L', 'Q'): - return ATI_CHIP_264LTPRO; - - case OldChipID('G', 'L'): case NewChipID('G', 'L'): - case OldChipID('G', 'M'): case NewChipID('G', 'M'): - case OldChipID('G', 'N'): case NewChipID('G', 'N'): - case OldChipID('G', 'O'): case NewChipID('G', 'O'): - case OldChipID('G', 'R'): case NewChipID('G', 'R'): - case OldChipID('G', 'S'): case NewChipID('G', 'S'): - return ATI_CHIP_264XL; - - case OldChipID('L', 'M'): case NewChipID('L', 'M'): - case OldChipID('L', 'N'): case NewChipID('L', 'N'): - case OldChipID('L', 'R'): case NewChipID('L', 'R'): - case OldChipID('L', 'S'): case NewChipID('L', 'S'): - return ATI_CHIP_MOBILITY; - - case NewChipID('R', 'E'): - case NewChipID('R', 'F'): - case NewChipID('R', 'G'): - case NewChipID('S', 'K'): - case NewChipID('S', 'L'): - case NewChipID('S', 'M'): - /* "SN" is listed as ATI_CHIP_RAGE128_4X in ATI docs */ - case NewChipID('S', 'N'): - return ATI_CHIP_RAGE128GL; - - case NewChipID('R', 'K'): - case NewChipID('R', 'L'): - /* - * ATI documentation lists SE/SF/SG under both ATI_CHIP_RAGE128VR - * and ATI_CHIP_RAGE128_4X, and lists SH/SK/SL under Rage 128 4X only. - * I'm stuffing them here for now until this can be clarified as ATI - * documentation doesn't mention their details. <mharris@redhat.com> - */ - case NewChipID('S', 'E'): - case NewChipID('S', 'F'): - case NewChipID('S', 'G'): - case NewChipID('S', 'H'): - return ATI_CHIP_RAGE128VR; - - /* case NewChipID('S', 'H'): */ - /* case NewChipID('S', 'K'): */ - /* case NewChipID('S', 'L'): */ - /* case NewChipID('S', 'N'): */ - /* return ATI_CHIP_RAGE128_4X; */ - - case NewChipID('P', 'A'): - case NewChipID('P', 'B'): - case NewChipID('P', 'C'): - case NewChipID('P', 'D'): - case NewChipID('P', 'E'): - case NewChipID('P', 'F'): - return ATI_CHIP_RAGE128PROGL; - - case NewChipID('P', 'G'): - case NewChipID('P', 'H'): - case NewChipID('P', 'I'): - case NewChipID('P', 'J'): - case NewChipID('P', 'K'): - case NewChipID('P', 'L'): - case NewChipID('P', 'M'): - case NewChipID('P', 'N'): - case NewChipID('P', 'O'): - case NewChipID('P', 'P'): - case NewChipID('P', 'Q'): - case NewChipID('P', 'R'): - case NewChipID('P', 'S'): - case NewChipID('P', 'T'): - case NewChipID('P', 'U'): - case NewChipID('P', 'V'): - case NewChipID('P', 'W'): - case NewChipID('P', 'X'): - return ATI_CHIP_RAGE128PROVR; - - case NewChipID('T', 'F'): - case NewChipID('T', 'L'): - case NewChipID('T', 'R'): - case NewChipID('T', 'S'): - case NewChipID('T', 'T'): - case NewChipID('T', 'U'): - return ATI_CHIP_RAGE128PROULTRA; - - case NewChipID('L', 'E'): - case NewChipID('L', 'F'): - /* - * "LK" and "LL" are not in any ATI documentation I can find - * - mharris - */ - case NewChipID('L', 'K'): - case NewChipID('L', 'L'): - return ATI_CHIP_RAGE128MOBILITY3; - - case NewChipID('M', 'F'): - case NewChipID('M', 'L'): - return ATI_CHIP_RAGE128MOBILITY4; - - case NewChipID('Q', 'D'): - case NewChipID('Q', 'E'): - case NewChipID('Q', 'F'): - case NewChipID('Q', 'G'): - return ATI_CHIP_RADEON; - - case NewChipID('Q', 'Y'): - case NewChipID('Q', 'Z'): - return ATI_CHIP_RADEONVE; - - case NewChipID('L', 'Y'): - case NewChipID('L', 'Z'): - return ATI_CHIP_RADEONMOBILITY6; - - case NewChipID('A', '6'): - case NewChipID('C', '6'): - return ATI_CHIP_RS100; - - case NewChipID('A', '7'): - case NewChipID('C', '7'): - return ATI_CHIP_RS200; - - case NewChipID('D', '7'): - case NewChipID('B', '7'): - return ATI_CHIP_RS250; - - case NewChipID('L', 'W'): - case NewChipID('L', 'X'): - return ATI_CHIP_RADEONMOBILITY7; - - case NewChipID('Q', 'H'): - case NewChipID('Q', 'I'): - case NewChipID('Q', 'J'): - case NewChipID('Q', 'K'): - case NewChipID('Q', 'L'): - case NewChipID('Q', 'M'): - case NewChipID('Q', 'N'): - case NewChipID('Q', 'O'): - case NewChipID('Q', 'h'): - case NewChipID('Q', 'i'): - case NewChipID('Q', 'j'): - case NewChipID('Q', 'k'): - case NewChipID('Q', 'l'): - case NewChipID('B', 'B'): - return ATI_CHIP_R200; - - case NewChipID('Q', 'W'): - case NewChipID('Q', 'X'): - return ATI_CHIP_RV200; - - case NewChipID('I', 'f'): - case NewChipID('I', 'g'): - return ATI_CHIP_RV250; - - case NewChipID('L', 'd'): - case NewChipID('L', 'f'): - case NewChipID('L', 'g'): - return ATI_CHIP_RADEONMOBILITY9; - - case NewChipID('X', '4'): - case NewChipID('X', '5'): - return ATI_CHIP_RS300; - - case NewChipID('Y', '\''): - case NewChipID('Y', 'a'): - case NewChipID('Y', 'b'): - case NewChipID('Y', 'd'): - return ATI_CHIP_RV280; - - case NewChipID('\\', 'a'): - case NewChipID('\\', 'c'): - return ATI_CHIP_RADEONMOBILITY9PLUS; - - case NewChipID('A', 'D'): - case NewChipID('A', 'E'): - case NewChipID('A', 'F'): - case NewChipID('A', 'G'): - case NewChipID('N', 'D'): - case NewChipID('N', 'E'): - case NewChipID('N', 'F'): - case NewChipID('N', 'G'): - return ATI_CHIP_R300; - - case NewChipID('A', 'H'): - case NewChipID('A', 'I'): - case NewChipID('A', 'J'): - case NewChipID('A', 'K'): - case NewChipID('N', 'H'): - case NewChipID('N', 'I'): - case NewChipID('N', 'K'): - return ATI_CHIP_R350; - - case NewChipID('A', 'P'): - case NewChipID('A', 'Q'): - case NewChipID('A', 'R'): - case NewChipID('A', 'S'): - case NewChipID('A', 'T'): - case NewChipID('A', 'V'): - case NewChipID('N', 'P'): - case NewChipID('N', 'Q'): - case NewChipID('N', 'R'): - case NewChipID('N', 'S'): - case NewChipID('N', 'T'): - case NewChipID('N', 'V'): - return ATI_CHIP_RV350; - - case NewChipID('N', 'J'): - return ATI_CHIP_R360; - - case NewChipID('H', 'D'): - return ATI_CHIP_HDTV; - - default: - /* - * I'd say it's a Rage128 or a Radeon here, except that I don't - * support them. - */ - return ATI_CHIP_Mach64; - } -} diff --git a/src/atichip.h b/src/atichip.h deleted file mode 100644 index 4cc30a0c..00000000 --- a/src/atichip.h +++ /dev/null @@ -1,153 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atichip.h,v 1.25 2003/10/07 22:47:11 martin Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATICHIP_H___ -#define ___ATICHIP_H___ 1 - -#include "atipriv.h" -#include "atiregs.h" - -#include "Xmd.h" - -/* - * Chip-related definitions. - */ -typedef enum -{ - ATI_CHIP_NONE = 0, - -#ifndef AVOID_CPIO - - ATI_CHIP_VGA, /* Generic VGA */ - ATI_CHIP_18800, - ATI_CHIP_18800_1, - ATI_CHIP_28800_2, - ATI_CHIP_28800_4, - ATI_CHIP_28800_5, - ATI_CHIP_28800_6, - ATI_CHIP_8514A, /* 8514/A */ - ATI_CHIP_CT480, /* 8514/A clone */ - ATI_CHIP_38800_1, /* Mach8 */ - ATI_CHIP_68800, /* Mach32 */ - ATI_CHIP_68800_3, /* Mach32 */ - ATI_CHIP_68800_6, /* Mach32 */ - ATI_CHIP_68800LX, /* Mach32 */ - ATI_CHIP_68800AX, /* Mach32 */ - -#endif /* AVOID_CPIO */ - - ATI_CHIP_88800GXC, /* Mach64 */ - ATI_CHIP_88800GXD, /* Mach64 */ - ATI_CHIP_88800GXE, /* Mach64 */ - ATI_CHIP_88800GXF, /* Mach64 */ - ATI_CHIP_88800GX, /* Mach64 */ - ATI_CHIP_88800CX, /* Mach64 */ - ATI_CHIP_264CT, /* Mach64 */ - ATI_CHIP_264ET, /* Mach64 */ - ATI_CHIP_264VT, /* Mach64 */ - ATI_CHIP_264GT, /* Mach64 */ - ATI_CHIP_264VTB, /* Mach64 */ - ATI_CHIP_264GTB, /* Mach64 */ - ATI_CHIP_264VT3, /* Mach64 */ - ATI_CHIP_264GTDVD, /* Mach64 */ - ATI_CHIP_264LT, /* Mach64 */ - ATI_CHIP_264VT4, /* Mach64 */ - ATI_CHIP_264GT2C, /* Mach64 */ - ATI_CHIP_264GTPRO, /* Mach64 */ - ATI_CHIP_264LTPRO, /* Mach64 */ - ATI_CHIP_264XL, /* Mach64 */ - ATI_CHIP_MOBILITY, /* Mach64 */ - ATI_CHIP_Mach64, /* Mach64 */ - ATI_CHIP_RAGE128GL, /* Rage128 */ - ATI_CHIP_RAGE128VR, /* Rage128 */ - ATI_CHIP_RAGE128PROGL, /* Rage128 */ - ATI_CHIP_RAGE128PROVR, /* Rage128 */ - ATI_CHIP_RAGE128PROULTRA, /* Rage128 */ - ATI_CHIP_RAGE128MOBILITY3, /* Rage128 */ - ATI_CHIP_RAGE128MOBILITY4, /* Rage128 */ - ATI_CHIP_Rage128, /* Rage128 */ - ATI_CHIP_RADEON, /* Radeon */ - ATI_CHIP_RADEONVE, /* Radeon VE */ - ATI_CHIP_RADEONMOBILITY6, /* Radeon M6 */ - ATI_CHIP_RS100, /* IGP320 */ - ATI_CHIP_RS200, /* IGP340 */ - ATI_CHIP_RS250, /* Radoen 7000 IGP */ - ATI_CHIP_RV200, /* RV200 */ - ATI_CHIP_RADEONMOBILITY7, /* Radeon M7 */ - ATI_CHIP_R200, /* R200 */ - ATI_CHIP_RV250, /* RV250 */ - ATI_CHIP_RADEONMOBILITY9, /* Radeon M9 */ - ATI_CHIP_RS300, /* Radoen 9000 IGP */ - ATI_CHIP_RV280, /* RV250 */ - ATI_CHIP_RADEONMOBILITY9PLUS, /* Radeon M9+ */ - ATI_CHIP_R300, /* R300 */ - ATI_CHIP_RV350, /* RV350 */ - ATI_CHIP_R350, /* R350 */ - ATI_CHIP_R360, /* R360 */ - ATI_CHIP_HDTV /* HDTV */ -} ATIChipType; - -extern const char *ATIChipNames[]; - -/* - * Foundry codes for 264xT's. - */ -typedef enum -{ - ATI_FOUNDRY_SGS, /* SGS-Thompson */ - ATI_FOUNDRY_NEC, /* NEC */ - ATI_FOUNDRY_KSC, /* KSC (?) */ - ATI_FOUNDRY_UMC, /* United Microelectronics Corporation */ - ATI_FOUNDRY_TSMC, /* Taiwan Semiconductor Manufacturing Company */ - ATI_FOUNDRY_5, - ATI_FOUNDRY_6, - ATI_FOUNDRY_UMCA /* UMC alternate */ -} ATIFoundryType; - -extern const char *ATIFoundryNames[]; - -#ifndef AVOID_CPIO - -extern void ATIMach32ChipID FunctionPrototype((ATIPtr)); - -#endif /* AVOID_CPIO */ - -extern void ATIMach64ChipID FunctionPrototype((ATIPtr, const CARD16)); -extern ATIChipType ATIChipID FunctionPrototype((const CARD16, - const CARD8)); - -#define OldChipID(_1, _0) \ - (SetBits(_0 - 'A', CHIP_CODE_0) | SetBits(_1 - 'A', CHIP_CODE_1)) - -#define NewChipID(_1, _0) \ - (SetBits(_0, CFG_CHIP_TYPE0) | SetBits(_1, CFG_CHIP_TYPE1)) - -#define OldToNewChipID(_ChipID) \ - (SetBits(GetBits(_ChipID, CHIP_CODE_0) + 'A', CFG_CHIP_TYPE0) | \ - SetBits(GetBits(_ChipID, CHIP_CODE_1) + 'A', CFG_CHIP_TYPE1)) - -#define NewToOldChipID(_ChipID) \ - (SetBits(GetBits(_ChipID, CFG_CHIP_TYPE0) - 'A', CHIP_CODE_0) | \ - (SetBits(GetBits(_ChipID, CFG_CHIP_TYPE1) - 'A', CHIP_CODE_1)) - -#endif /* ___ATICHIP_H___ */ diff --git a/src/aticlock.c b/src/aticlock.c deleted file mode 100644 index e1201cb3..00000000 --- a/src/aticlock.c +++ /dev/null @@ -1,1608 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/aticlock.c,v 1.21 2003/04/23 21:51:27 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -/* - * Adapters prior to V5 use 4 crystals. Adapters V5 and later use a clock - * generator chip. V3 and V4 adapters differ when it comes to choosing clock - * frequencies. - * - * VGA Wonder V3/V4 Adapter Clock Frequencies - * R E G I S T E R S - * 1CE(*) 3C2 3C2 Frequency - * B2h/BEh - * Bit 6/4 Bit 3 Bit 2 (MHz) - * ------- ------- ------- ------- - * 0 0 0 50.000 - * 0 0 1 56.644 - * 0 1 0 Spare 1 - * 0 1 1 44.900 - * 1 0 0 44.900 - * 1 0 1 50.000 - * 1 1 0 Spare 2 - * 1 1 1 36.000 - * - * (*): V3 uses index B2h, bit 6; V4 uses index BEh, bit 4 - * - * V5, PLUS, XL and XL24 usually have an ATI 18810 clock generator chip, but - * some have an ATI 18811-0, and it's quite conceivable that some exist with - * ATI 18811-1's or ATI 18811-2's. Mach32 adapters are known to use any one of - * these clock generators. Mach32 adapters also use a different dot clock - * ordering. ATI says there is no reliable way for the driver to determine - * which clock generator is on the adapter, but this driver will do its best to - * do so anyway. - * - * VGA Wonder V5/PLUS/XL/XL24 Clock Frequencies - * R E G I S T E R S - * 1CE 1CE 3C2 3C2 Frequency - * B9h BEh (MHz) 18811-0 18811-1 - * Bit 1 Bit 4 Bit 3 Bit 2 18810 18812-0 18811-2 (*5) - * ------- ------- ------- ------- ------- ------- ------- ------- - * 0 0 0 0 30.240 30.240 135.000 75.000 - * 0 0 0 1 32.000 32.000 32.000 77.500 - * 0 0 1 0 37.500 110.000 110.000 80.000 - * 0 0 1 1 39.000 80.000 80.000 90.000 - * 0 1 0 0 42.954 42.954 100.000 25.175 - * 0 1 0 1 48.771 48.771 126.000 28.322 - * 0 1 1 0 (*1) 92.400 92.400 31.500 - * 0 1 1 1 36.000 36.000 36.000 36.000 - * 1 0 0 0 40.000 39.910 39.910 100.000 - * 1 0 0 1 (*4) 44.900 44.900 110.000 - * 1 0 1 0 75.000 75.000 75.000 126.000 - * 1 0 1 1 65.000 65.000 65.000 135.000 - * 1 1 0 0 50.350 50.350 50.350 40.000 - * 1 1 0 1 56.640 56.640 56.640 44.900 - * 1 1 1 0 (*2) (*3) (*3) 50.000 - * 1 1 1 1 44.900 44.900 44.900 65.000 - * - * (*1) External 0 (supposedly 16.657 Mhz) - * (*2) External 1 (supposedly 28.322 MHz) - * (*3) This setting doesn't seem to generate anything - * (*4) This setting is documented to be 56.644 MHz, but something close to 82 - * MHz has also been encountered. - * (*5) This setting is for Dell OmniPlex 590 systems, with a 68800AX on the - * motherboard, along with an AT&T21C498 DAC (which is reported as an - * STG1700) and ICS2494AM clock generator (a.k.a. ATI 18811-?). - * - * Mach32 Clock Frequencies - * R E G I S T E R S - * 1CE 1CE 3C2 3C2 Frequency - * B9h BEh (MHz) 18811-0 18811-1 - * Bit 1 Bit 4 Bit 3 Bit 2 18810 18812-0 18811-2 (*5) - * ------- ------- ------- ------- ------- ------- ------- ------- - * 0 0 0 0 42.954 42.954 100.000 25.175 - * 0 0 0 1 48.771 48.771 126.000 28.322 - * 0 0 1 0 (*1) 92.400 92.400 31.500 - * 0 0 1 1 36.000 36.000 36.000 36.000 - * 0 1 0 0 30.240 30.240 135.000 75.000 - * 0 1 0 1 32.000 32.000 32.000 77.500 - * 0 1 1 0 37.500 110.000 110.000 80.000 - * 0 1 1 1 39.000 80.000 80.000 90.000 - * 1 0 0 0 50.350 50.350 50.350 40.000 - * 1 0 0 1 56.640 56.640 56.640 44.900 - * 1 0 1 0 (*2) (*3) (*3) 50.000 - * 1 0 1 1 44.900 44.900 44.900 65.000 - * 1 1 0 0 40.000 39.910 39.910 100.000 - * 1 1 0 1 (*4) 44.900 44.900 110.000 - * 1 1 1 0 75.000 75.000 75.000 126.000 - * 1 1 1 1 65.000 65.000 65.000 135.000 - * - * (*1) External 0 (supposedly 16.657 Mhz) - * (*2) External 1 (supposedly 28.322 MHz) - * (*3) This setting doesn't seem to generate anything - * (*4) This setting is documented to be 56.644 MHz, but something close to 82 - * MHz has also been encountered. - * (*5) This setting is for Dell OmniPlex 590 systems, with a 68800AX on the - * motherboard, along with an AT&T21C498 DAC (which is reported as an - * STG1700) and ICS2494AM clock generator (a.k.a. ATI 18811-?). - * - * Note that, to reduce confusion, this driver masks out the different clock - * ordering. - * - * For all adapters, these frequencies can be divided by 1 or 2. For all - * adapters, except Mach32's and Mach64's, frequencies can also be divided by 3 - * or 4. - * - * Register 1CE, index B8h - * Bit 7 Bit 6 - * ------- ------- - * 0 0 Divide by 1 - * 0 1 Divide by 2 - * 1 0 Divide by 3 - * 1 1 Divide by 4 - * - * With respect to clocks, Mach64's are entirely different animals. - * - * The oldest Mach64's use one of the non-programmable clock generators - * described above. In this case, the driver will handle clocks in much the - * same way as it would for a Mach32. - * - * All other Mach64 adapters use a programmable clock generator. BIOS - * initialisation programmes an initial set of frequencies. Two of these are - * reserved to allow for the setting of modes that do not use a frequency from - * this initial set. One of these reserved slots is used by the BIOS mode set - * routine, the other by the particular accelerated driver used (MS-Windows, - * AutoCAD, etc.). The slots reserved in this way are dependent on the - * particular clock generator used by the adapter. - * - * If the driver does not support the adapter's clock generator, it will try to - * match the (probed or specified) clocks to one of the following sets. - * - * Mach64 Clock Frequencies for unsupported programmable clock generators - * R E G I S T E R S - * 1CE 1CE 3C2 3C2 Frequency - * B9h BEh (MHz) - * Bit 1 Bit 4 Bit 3 Bit 2 Set 1 Set 2 Set 3 - * ------- ------- ------- ------- ------- ------- ------- - * 0 0 0 0 50.350 25.180 25.180 - * 0 0 0 1 56.640 28.320 28.320 - * 0 0 1 0 63.000 31.500 0.000 - * 0 0 1 1 72.000 36.000 0.000 - * 0 1 0 0 0.000 0.000 0.000 - * 0 1 0 1 110.000 110.000 0.000 - * 0 1 1 0 126.000 126.000 0.000 - * 0 1 1 1 135.000 135.000 0.000 - * 1 0 0 0 40.000 40.000 0.000 - * 1 0 0 1 44.900 44.900 0.000 - * 1 0 1 0 49.500 49.500 0.000 - * 1 0 1 1 50.000 50.000 0.000 - * 1 1 0 0 0.000 0.000 0.000 - * 1 1 0 1 80.000 80.000 0.000 - * 1 1 1 0 75.000 75.000 0.000 - * 1 1 1 1 65.000 65.000 0.000 - * - * The driver will never select a setting of 0.000 MHz. The above comments on - * clock ordering and clock divider apply here also. - * - * For all supported programmable clock generators, the driver will ignore any - * XF86Config clock line and programme, as needed, the clock number reserved by - * the BIOS for accelerated drivers. The driver's mode initialisation routine - * finds integers N, M and D such that - * - * N - * R * ------- MHz - * M * D - * - * best approximates the mode's clock frequency, where R is the crystal- - * generated reference frequency (usually 14.318 MHz). D is a power of 2 - * except for those integrated controllers that also offer odd dividers. - * Different clock generators have different restrictions on the value N, M and - * D can assume. The driver contains an internal table to record these - * restrictions (among other things). The resulting values of N, M and D are - * then encoded in a generator-specific way and used to programme the clock. - * The Mach64's clock divider is not used in this case. - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atichip.h" -#include "atidac.h" -#include "atidsp.h" -#include "atimach64io.h" -#include "atimode.h" -#include "atiwonderio.h" - -/* - * Definitions related to non-programmable clock generators. - */ -const char *ATIClockNames[] = -{ - "unknown", - "IBM VGA compatible", - "crystals", - "ATI 18810 or similar", - "ATI 18811-0 or similar", - "ATI 18811-1 or similar", - "ICS 2494-AM or similar", - "Programmable (BIOS setting 1)", - "Programmable (BIOS setting 2)", - "Programmable (BIOS setting 3)" -}; - -/* - * Definitions related to programmable clock generators. - */ -static CARD16 ATIPostDividers[] = {1, 2, 4, 8, 16, 32, 64, 128}, - ATI264xTPostDividers[] = {1, 2, 4, 8, 3, 0, 6, 12}; -ClockRec ATIClockDescriptors[] = -{ - { - 0, 0, 0, 1, 1, - 1, 1, 0, - 0, NULL, - "Non-programmable" - }, - { - 257, 512, 257, 1, 1, - 46, 46, 0, - 4, ATIPostDividers, - "ATI 18818 or ICS 2595 or similar" - }, - { - 2, 129, 2, 1, 1, - 8, 14, 2, - 8, ATIPostDividers, - "SGS-Thompson 1703 or similar" - }, - { - 16, 263, 8, 8, 9, - 4, 12, 2, - 4, ATIPostDividers, - "Chrontel 8398 or similar" - }, - { - 2, 255, 0, 1, 1, - 45, 45, 0, - 4, ATI264xTPostDividers, - "Internal" - }, - { - 2, 257, 2, 1, 1, - 2, 32, 2, - 4, ATIPostDividers, - "AT&T 20C408 or similar" - }, - { - 65, 128, 65, 1, 1, - 2, 14, 0, - 4, ATIPostDividers, - "IBM RGB 514 or similar" - } -}; - -/* - * XF86Config clocks line that start with the following will either be rejected - * for ATI adapters, or accepted for non-ATI adapters. - */ -static const int -ATIVGAClocks[] = -{ - 25175, 28322, - -1 -}; - -/* - * The driver will attempt to match fixed clocks to one of the following - * specifications. - */ -static const int -ATICrystalFrequencies[] = -{ - 50000, 56644, 0, 44900, 44900, 50000, 0, 36000, - -1 -}, -ATI18810Frequencies[] = -{ - 30240, 32000, 37500, 39000, 42954, 48771, 0, 36000, - 40000, 0, 75000, 65000, 50350, 56640, 0, 44900 -}, -ATI188110Frequencies[] = -{ - 30240, 32000, 110000, 80000, 42954, 48771, 92400, 36000, - 39910, 44900, 75000, 65000, 50350, 56640, 0, 44900 -}, -ATI188111Frequencies[] = -{ - 135000, 32000, 110000, 80000, 100000, 126000, 92400, 36000, - 39910, 44900, 75000, 65000, 50350, 56640, 0, 44900 -}, -ATI2494AMFrequencies[] = -{ - 75000, 77500, 80000, 90000, 25175, 28322, 31500, 36000, - 100000, 110000, 126000, 135000, 40000, 44900, 50000, 65000 -}, -ATIMach64AFrequencies[] = -{ - 0, 110000, 126000, 135000, 50350, 56640, 63000, 72000, - 0, 80000, 75000, 65000, 40000, 44900, 49500, 50000 -}, -ATIMach64BFrequencies[] = -{ - 0, 110000, 126000, 135000, 25180, 28320, 31500, 36000, - 0, 80000, 75000, 65000, 40000, 44900, 49500, 50000 -}, -ATIMach64CFrequencies[] = -{ - 0, 0, 0, 0, 25180, 28320, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0 -}, -*SpecificationClockLine[] = -{ - NULL, - ATIVGAClocks, - ATICrystalFrequencies, - ATI18810Frequencies, - ATI188110Frequencies, - ATI188111Frequencies, - ATI2494AMFrequencies, - ATIMach64AFrequencies, - ATIMach64BFrequencies, - ATIMach64CFrequencies, - NULL -}; - -/* - * The driver will reject XF86Config clocks lines that start with, or are an - * initial subset of, one of the following. - */ -static const int -ATIPre_2_1_1_Clocks_A[] = /* Based on 18810 */ -{ - 18000, 22450, 25175, 28320, 36000, 44900, 50350, 56640, - 30240, 32000, 37500, 39000, 40000, 0, 75000, 65000, - -1 -}, -ATIPre_2_1_1_Clocks_B[] = /* Based on 18811-0 */ -{ - 18000, 22450, 25175, 28320, 36000, 44900, 50350, 56640, - 30240, 32000, 110000, 80000, 39910, 44900, 75000, 65000, - -1 -}, -ATIPre_2_1_1_Clocks_C[] = /* Based on 18811-1 (or -2) */ -{ - 18000, 22450, 25175, 28320, 36000, 44900, 50350, 56640, - 135000, 32000, 110000, 80000, 39910, 44900, 75000, 65000, - -1 -}, -ATIPre_2_1_1_Clocks_D[] = /* Based on ICS 2494AM */ -{ - 18000, 32500, 20000, 22450, 36000, 65000, 40000, 44900, - 75000, 77500, 80000, 90000, 100000, 110000, 126000, 135000, - -1 -}, -ATIPre_2_1_1_Clocks_E[] = /* Based on programmable setting 1 */ -{ - 36000, 25000, 20000, 22450, 72000, 50000, 40000, 44900, - 0, 110000, 126000, 135000, 0, 80000, 75000, 65000, - -1 -}, -ATIPre_2_1_1_Clocks_F[] = /* Based on programmable setting 2 */ -{ - 18000, 25000, 20000, 22450, 36000, 50000, 40000, 44900, - 0, 110000, 126000, 135000, 0, 80000, 75000, 65000, - -1 -}, -*InvalidClockLine[] = -{ - NULL, - ATIVGAClocks, - ATIPre_2_1_1_Clocks_A, - ATIPre_2_1_1_Clocks_B, - ATIPre_2_1_1_Clocks_C, - ATIPre_2_1_1_Clocks_D, - ATIPre_2_1_1_Clocks_E, - ATIPre_2_1_1_Clocks_F, - NULL -}; - -/* - * Clock maps. - */ -static const CARD8 ClockMaps[][4] = -{ - /* Null map */ - { 0, 1, 2, 3}, - /* VGA Wonder map <-> Mach{8,32,64} */ - { 1, 0, 3, 2}, - /* VGA Wonder map <-> Accelerator */ - { 0, 2, 1, 3}, - /* VGA -> Accelerator map */ - { 2, 0, 3, 1}, - /* Accelerator -> VGA map */ - { 1, 3, 0, 2} -}; -#define ATIVGAWonderClockMap ClockMaps[0] -#define ATIVGAWonderClockUnmap ATIVGAWonderClockMap -#define ATIMachVGAClockMap ClockMaps[1] -#define ATIMachVGAClockUnmap ATIMachVGAClockMap -#define ATIVGAProgrammableClockMap ClockMaps[2] -#define ATIVGAProgrammableClockUnmap ATIVGAProgrammableClockMap -#define ATIAcceleratorClockMap ClockMaps[3] -#define ATIAcceleratorClockUnmap ClockMaps[4] -#define ATIProgrammableClockMap ClockMaps[0] -#define ATIProgrammableClockUnmap ATIProgrammableClockMap -#define MapClockIndex(_ClockMap, _Index) \ - (SetBits((_ClockMap)[GetBits(_Index, 0x0CU)], 0x0CU) | \ - ((_Index) & ~0x0CU)) - -/* - * ATIMatchClockLine -- - * - * This function tries to match the XF86Config clocks to one of an array of - * clock lines. It returns a clock line number or 0. - */ -static int -ATIMatchClockLine -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - const int **ClockLine, - const unsigned short int NumberOfClocks, - const int CalibrationClockNumber, - const int ClockMap -) -{ - int ClockChip = 0, ClockChipIndex = 0; - int NumberOfMatchingClocks = 0; - int MinimumGap = CLOCK_TOLERANCE + 1; - - /* For ATI adapters, reject generic VGA clocks */ - -#ifndef AVOID_CPIO - - if (pATI->Adapter != ATI_ADAPTER_VGA) - -#endif /* AVOID_CPIO */ - - { - if (ClockLine == SpecificationClockLine) - ClockChipIndex++; - } - - /* If checking for XF86Config clock order, skip crystals */ - if (ClockMap) - ClockChipIndex++; - - for (; ClockLine[++ClockChipIndex]; ) - { - int MaximumGap = 0, ClockCount = 0, ClockIndex = 0; - -#ifndef AVOID_CPIO - - /* Only Mach64's and later can have programmable clocks */ - if ((ClockChipIndex >= ATI_CLOCK_MACH64A) && - (pATI->Adapter < ATI_ADAPTER_MACH64)) - break; - -#endif /* AVOID_CPIO */ - - for (; ClockIndex < NumberOfClocks; ClockIndex++) - { - int Gap, XF86ConfigClock, SpecificationClock; - - SpecificationClock = ClockLine[ClockChipIndex] - [MapClockIndex(ClockMaps[ClockMap], ClockIndex)]; - if (SpecificationClock < 0) - break; - if (!SpecificationClock) - continue; - - XF86ConfigClock = pScreenInfo->clock[ClockIndex]; - if (!XF86ConfigClock) - continue; - - Gap = abs(XF86ConfigClock - SpecificationClock); - if (Gap >= MinimumGap) - goto SkipThisClockGenerator; - if (!Gap) - { - if (ClockIndex == CalibrationClockNumber) - continue; - } - else if (Gap > MaximumGap) - { - MaximumGap = Gap; - } - ClockCount++; - } - - if (ClockCount <= NumberOfMatchingClocks) - continue; - NumberOfMatchingClocks = ClockCount; - ClockChip = ClockChipIndex; - if (!(MinimumGap = MaximumGap)) - break; - -SkipThisClockGenerator:; - -#ifndef AVOID_CPIO - - /* For non-ATI adapters, only normalise standard VGA clocks */ - if (pATI->Adapter == ATI_ADAPTER_VGA) - break; - -#endif /* AVOID_CPIO */ - - } - - return ClockChip; -} - -/* - * ATIClockPreInit -- - * - * This function is called by ATIPreInit() and handles the XF86Config clocks - * line (or lack thereof). - */ -void -ATIClockPreInit -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - GDevPtr pGDev, - ClockRangePtr pRange -) -{ - double ScaleFactor; - unsigned short int NumberOfUndividedClocks; - unsigned short int NumberOfDividers, NumberOfClocks; - int CalibrationClockNumber, CalibrationClockValue; - int ClockIndex, SpecificationClock, ClockMap = 0, Index; - CARD8 CanDisableInterrupts; - -#ifndef AVOID_CPIO - - CARD8 genmo; - -#endif /* AVOID_CPIO */ - - /* - * Decide what to do about the XF86Config clocks for programmable clock - * generators. - */ - if (pATI->ProgrammableClock != ATI_CLOCK_FIXED) - { - /* Check for those that are not (yet) handled */ - if ((pATI->ProgrammableClock == ATI_CLOCK_UNKNOWN) || - (pATI->ProgrammableClock > NumberOf(ATIClockDescriptors))) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0, - "Unknown programmable clock generator type (0x%02X)" - " detected.\n", pATI->ProgrammableClock); - } - else if (pATI->ClockDescriptor.MaxN <= 0) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0, - "Unsupported programmable clock generator detected: %s.\n", - pATI->ClockDescriptor.ClockName); - } - else - { - /* - * Recognise supported clock generators. This involves telling the - * rest of the server about it and (re-)initializing the XF86Config - * clocks line. - */ - pRange->clockIndex = -1; - pScreenInfo->progClock = TRUE; - - /* Set internal clock ordering */ - -#ifndef AVOID_CPIO - - if (pATI->NewHW.crtc == ATI_CRTC_VGA) - { - pATI->NewHW.ClockMap = ATIVGAProgrammableClockMap; - pATI->NewHW.ClockUnmap = ATIVGAProgrammableClockUnmap; - } - else - -#endif /* AVOID_CPIO */ - - { - pATI->NewHW.ClockMap = ATIProgrammableClockMap; - pATI->NewHW.ClockUnmap = ATIProgrammableClockUnmap; - } - - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s programmable clock generator detected.\n", - pATI->ClockDescriptor.ClockName); - if (pATI->ReferenceDenominator == 1) - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "Reference clock %.3f MHz.\n", - (double)pATI->ReferenceNumerator / 1000.0); - else - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "Reference clock %.6g/%d (%.3f) MHz.\n", - (double)pATI->ReferenceNumerator / 1000.0, - pATI->ReferenceDenominator, - (double)pATI->ReferenceNumerator / - ((double)pATI->ReferenceDenominator * 1000.0)); - - /* Clobber XF86Config clocks line */ - if (pGDev->numclocks) - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "XF86Config clocks specification ignored.\n"); - - if (pATI->ProgrammableClock == ATI_CLOCK_CH8398) - { /* First two are fixed */ - pScreenInfo->numClocks = 2; - pScreenInfo->clock[0] = 25175; - pScreenInfo->clock[1] = 28322; - } - else if (pATI->ProgrammableClock == ATI_CLOCK_INTERNAL) - { - /* - * The integrated PLL generates clocks as if the reference - * frequency were doubled. - */ - pATI->ReferenceNumerator <<= 1; - } - - return; /* ... to ATIPreInit() */ - } - } - -#ifndef AVOID_CPIO - - /* Set default clock maps */ - pATI->NewHW.ClockMap = ATIVGAWonderClockMap; - pATI->NewHW.ClockUnmap = ATIVGAWonderClockUnmap; - -#endif /* AVOID_CPIO */ - - /* - * Determine the number of clock values the adapter should be able to - * generate and the dot clock to use for probe calibration. - */ -ProbeClocks: - -#ifndef AVOID_CPIO - - if (pATI->Adapter == ATI_ADAPTER_VGA) - { - NumberOfDividers = 1; - NumberOfUndividedClocks = 4; - CalibrationClockNumber = 1; - CalibrationClockValue = 28322; - } - else - -#endif /* AVOID_CPIO */ - - { - -#ifndef AVOID_CPIO - - NumberOfDividers = 4; - if ((pATI->Chip <= ATI_CHIP_18800) || - (pATI->Adapter == ATI_ADAPTER_V4)) - { - NumberOfUndividedClocks = 8; - /* Actually, any undivided clock will do */ - CalibrationClockNumber = 1; - CalibrationClockValue = 56644; - } - else - -#endif /* AVOID_CPIO */ - - { - NumberOfUndividedClocks = 16; - -#ifndef AVOID_CPIO - - CalibrationClockNumber = 7; - CalibrationClockValue = 36000; - if (pATI->Chip >= ATI_CHIP_68800) - -#endif /* AVOID_CPIO */ - - { - NumberOfDividers = 2; - if (pATI->Chip >= ATI_CHIP_264CT) - { - NumberOfDividers = 1; - NumberOfUndividedClocks = 4; - CalibrationClockNumber = 1; - CalibrationClockValue = 28322; - } - else - -#ifndef AVOID_CPIO - - if (pATI->Adapter >= ATI_ADAPTER_MACH64) - -#endif /* AVOID_CPIO */ - - { - CalibrationClockNumber = 10 /* or 11 */; - CalibrationClockValue = 75000 /* or 65000 */; - } - - /* - * When selecting clocks, all ATI accelerators use a different - * clock ordering. - */ - -#ifndef AVOID_CPIO - - if (pATI->NewHW.crtc == ATI_CRTC_VGA) - { - pATI->NewHW.ClockMap = ATIMachVGAClockMap; - pATI->NewHW.ClockUnmap = ATIMachVGAClockUnmap; - } - else - -#endif /* AVOID_CPIO */ - - { - pATI->NewHW.ClockMap = ATIAcceleratorClockMap; - pATI->NewHW.ClockUnmap = ATIAcceleratorClockUnmap; - } - } - } - } - - pATI->OldHW.ClockMap = pATI->NewHW.ClockMap; - pATI->OldHW.ClockUnmap = pATI->NewHW.ClockUnmap; - - NumberOfClocks = NumberOfUndividedClocks * NumberOfDividers; - - /* - * Respect any XF86Config clocks line. Well, that's the theory, anyway. - * In practice, however, the regular use of probed values is widespread, at - * times causing otherwise inexplicable results. So, attempt to normalise - * the clocks to known (i.e. specification) values. - */ - if (!pGDev->numclocks || pATI->OptionProbeClocks || - xf86ServerIsOnlyProbing()) - { - if (pATI->ProgrammableClock != ATI_CLOCK_FIXED) - { - /* - * For unsupported programmable clock generators, pick the highest - * frequency set by BIOS initialisation for clock calibration. - */ - CalibrationClockNumber = CalibrationClockValue = 0; - for (ClockIndex = 0; - ClockIndex < NumberOfUndividedClocks; - ClockIndex++) - { - if (CalibrationClockValue < pATI->BIOSClocks[ClockIndex]) - { - CalibrationClockNumber = ClockIndex; - CalibrationClockValue = pATI->BIOSClocks[ClockIndex]; - } - } - CalibrationClockNumber = - MapClockIndex(pATI->NewHW.ClockUnmap, CalibrationClockNumber); - CalibrationClockValue *= 10; - } - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - /* - * The current video state needs to be saved before the clock - * probe, and restored after. Video memory corruption and other - * effects occur because, at this early stage, the clock probe - * cannot reliably be prevented from enabling frequencies that are - * greater than what the adapter can handle. - */ - ATIModeSave(pScreenInfo, pATI, &pATI->OldHW); - - /* Ensure clock select pins are not OR'ed with anything */ - if (pATI->CPIO_VGAWonder && (pATI->OldHW.crtc == ATI_CRTC_VGA)) - ATIModifyExtReg(pATI, 0xB5U, pATI->OldHW.b5, 0x7FU, 0x00U); - } - -#endif /* AVOID_CPIO */ - - /* - * Probe the adapter for clock values. The following is essentially - * the common layer's xf86GetClocks() reworked to fit. One difference - * is the ability to monitor a VSync bit in MMIO space. - */ - CanDisableInterrupts = TRUE; /* An assumption verified below */ - - for (ClockIndex = 0; ClockIndex < NumberOfClocks; ClockIndex++) - { - pScreenInfo->clock[ClockIndex] = 0; - - /* Remap clock number */ - Index = MapClockIndex(pATI->OldHW.ClockMap, ClockIndex); - - /* Select the clock */ - switch (pATI->OldHW.crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - /* Get generic two low-order bits */ - genmo = (inb(R_GENMO) & 0xF3U) | ((Index << 2) & 0x0CU); - - if (pATI->CPIO_VGAWonder) - { - /* - * On adapters with crystals, switching to one of the - * spare assignments doesn't do anything (i.e. the - * previous setting remains in effect). So, disable - * their selection. - */ - if (((Index & 0x03U) == 0x02U) && - ((pATI->Chip <= ATI_CHIP_18800) || - (pATI->Adapter == ATI_ADAPTER_V4))) - continue; - - /* Start sequencer reset */ - PutReg(SEQX, 0x00U, 0x00U); - - /* Set high-order bits */ - if (pATI->Chip <= ATI_CHIP_18800) - { - ATIModifyExtReg(pATI, 0xB2U, -1, 0xBFU, - Index << 4); - } - else - { - ATIModifyExtReg(pATI, 0xBEU, -1, 0xEFU, - Index << 2); - if (pATI->Adapter != ATI_ADAPTER_V4) - { - Index >>= 1; - ATIModifyExtReg(pATI, 0xB9U, -1, 0xFDU, - Index >> 1); - } - } - - /* Set clock divider bits */ - ATIModifyExtReg(pATI, 0xB8U, -1, 0x00U, - (Index << 3) & 0xC0U); - } - else - { - /* - * Reject clocks that cannot be selected. - */ - if (Index & ~0x03U) - continue; - - /* Start sequencer reset */ - PutReg(SEQX, 0x00U, 0x00U); - } - - /* Must set miscellaneous output register last */ - outb(GENMO, genmo); - - /* End sequencer reset */ - PutReg(SEQX, 0x00U, 0x03U); - - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - out8(CLOCK_CNTL, CLOCK_STROBE | - SetBits(Index, CLOCK_SELECT | CLOCK_DIVIDER)); - break; - - default: - continue; - } - - usleep(50000); /* Let clock stabilise */ - - xf86SetPriority(TRUE); - - /* Try to disable interrupts */ - if (CanDisableInterrupts && !xf86DisableInterrupts()) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to disable interrupts; Clock probe will not be as" - " accurate.\n"); - CanDisableInterrupts = FALSE; - } - - /* - * Generate a count while monitoring the vertical sync or blanking - * pulse. This is dependent on the CRTC used by the mode on server - * entry. - */ - switch (pATI->OldHW.crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - /* Verify vertical sync pulses are in fact occurring */ - Index = 1 << 19; - while (!(inb(GENS1(pATI->CPIO_VGABase)) & 0x08U)) - if (Index-- <= 0) - goto EnableInterrupts; - Index = 1 << 19; - while (inb(GENS1(pATI->CPIO_VGABase)) & 0x08U) - if (Index-- <= 0) - goto EnableInterrupts; - Index = 1 << 19; - while (!(inb(GENS1(pATI->CPIO_VGABase)) & 0x08U)) - if (Index-- <= 0) - goto EnableInterrupts; - - /* Generate the count */ - for (Index = 0; Index < 8; Index++) - { - while (inb(GENS1(pATI->CPIO_VGABase)) & 0x08U) - pScreenInfo->clock[ClockIndex]++; - while (!(inb(GENS1(pATI->CPIO_VGABase)) & 0x08U)) - pScreenInfo->clock[ClockIndex]++; - } - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - /* Verify vertical blanking pulses are in fact occurring */ - Index = 1 << 19; - while (!(inr(CRTC_INT_CNTL) & CRTC_VBLANK)) - if (Index-- <= 0) - goto EnableInterrupts; - Index = 1 << 19; - while (inr(CRTC_INT_CNTL) & CRTC_VBLANK) - if (Index-- <= 0) - goto EnableInterrupts; - Index = 1 << 19; - while (!(inr(CRTC_INT_CNTL) & CRTC_VBLANK)) - if (Index-- <= 0) - goto EnableInterrupts; - - /* Generate the count */ - for (Index = 0; Index < 4; Index++) - { - while (inr(CRTC_INT_CNTL) & CRTC_VBLANK) - pScreenInfo->clock[ClockIndex]++; - while (!(inr(CRTC_INT_CNTL) & CRTC_VBLANK)) - pScreenInfo->clock[ClockIndex]++; - } - break; - - default: - break; - } - - EnableInterrupts: - if (CanDisableInterrupts) - xf86EnableInterrupts(); - - xf86SetPriority(FALSE); - } - - ScaleFactor = (double)CalibrationClockValue * - (double)pScreenInfo->clock[CalibrationClockNumber]; - - /* Scale the clocks from counts to kHz */ - for (ClockIndex = 0; ClockIndex < NumberOfClocks; ClockIndex++) - { - if (ClockIndex == CalibrationClockNumber) - pScreenInfo->clock[ClockIndex] = CalibrationClockValue; - else if (pScreenInfo->clock[ClockIndex]) - /* Round to the nearest 10 kHz */ - pScreenInfo->clock[ClockIndex] = - (int)(((ScaleFactor / - (double)pScreenInfo->clock[ClockIndex]) + - 5) / 10) * 10; - } - - pScreenInfo->numClocks = NumberOfClocks; - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - /* Restore video state */ - ATIModeSet(pScreenInfo, pATI, &pATI->OldHW); - xfree(pATI->OldHW.frame_buffer); - pATI->OldHW.frame_buffer = NULL; - } - -#endif /* AVOID_CPIO */ - - /* Tell user clocks were probed, instead of supplied */ - pATI->OptionProbeClocks = TRUE; - - /* Attempt to match probed clocks to a known specification */ - pATI->Clock = ATIMatchClockLine(pScreenInfo, pATI, - SpecificationClockLine, NumberOfUndividedClocks, - CalibrationClockNumber, 0); - -#ifndef AVOID_CPIO - - if ((pATI->Chip <= ATI_CHIP_18800) || - (pATI->Adapter == ATI_ADAPTER_V4)) - { - /* V3 and V4 adapters don't have clock chips */ - if (pATI->Clock > ATI_CLOCK_CRYSTALS) - pATI->Clock = ATI_CLOCK_NONE; - } - else - -#endif /* AVOID_CPIO */ - - { - /* All others don't have crystals */ - if (pATI->Clock == ATI_CLOCK_CRYSTALS) - pATI->Clock = ATI_CLOCK_NONE; - } - } - else - { - /* - * Allow for an initial subset of specification clocks. Can't allow - * for any more than that though... - */ - if (NumberOfClocks > pGDev->numclocks) - { - NumberOfClocks = pGDev->numclocks; - if (NumberOfUndividedClocks > NumberOfClocks) - NumberOfUndividedClocks = NumberOfClocks; - } - - /* Move XF86Config clocks into the ScrnInfoRec */ - for (ClockIndex = 0; ClockIndex < NumberOfClocks; ClockIndex++) - pScreenInfo->clock[ClockIndex] = pGDev->clock[ClockIndex]; - pScreenInfo->numClocks = NumberOfClocks; - - /* Attempt to match clocks to a known specification */ - pATI->Clock = ATIMatchClockLine(pScreenInfo, pATI, - SpecificationClockLine, NumberOfUndividedClocks, -1, 0); - -#ifndef AVOID_CPIO - - if (pATI->Adapter != ATI_ADAPTER_VGA) - -#endif /* AVOID_CPIO */ - - { - if (pATI->Clock == ATI_CLOCK_NONE) - { - /* - * Reject certain clock lines that are obviously wrong. This - * includes the standard VGA clocks for ATI adapters, and clock - * lines that could have been used with the pre-2.1.1 driver. - */ - if (ATIMatchClockLine(pScreenInfo, pATI, InvalidClockLine, - NumberOfClocks, -1, 0)) - { - pATI->OptionProbeClocks = TRUE; - } - else - -#ifndef AVOID_CPIO - - if ((pATI->Chip >= ATI_CHIP_18800) && - (pATI->Adapter != ATI_ADAPTER_V4)) - -#endif /* AVOID_CPIO */ - - { - /* - * Check for clocks that are specified in the wrong order. - * This is meant to catch those who are trying to use the - * clock order intended for the old accelerated servers. - */ - while ((++ClockMap, ClockMap %= NumberOf(ClockMaps))) - { - pATI->Clock = ATIMatchClockLine(pScreenInfo, pATI, - SpecificationClockLine, NumberOfUndividedClocks, - -1, ClockMap); - if (pATI->Clock != ATI_CLOCK_NONE) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, - X_WARNING, 0, - "XF86Config clock ordering incorrect. Clocks" - " will be reordered.\n"); - break; - } - } - } - } - else - /* Ensure crystals are not matched to clock chips, and vice versa */ - -#ifndef AVOID_CPIO - - if ((pATI->Chip <= ATI_CHIP_18800) || - (pATI->Adapter == ATI_ADAPTER_V4)) - { - if (pATI->Clock > ATI_CLOCK_CRYSTALS) - pATI->OptionProbeClocks = TRUE; - } - else - -#endif /* AVOID_CPIO */ - - { - if (pATI->Clock == ATI_CLOCK_CRYSTALS) - pATI->OptionProbeClocks = TRUE; - } - - if (pATI->OptionProbeClocks) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0, - "Invalid or obsolete XF86Config clocks line rejected.\n" - " Clocks will be probed.\n"); - goto ProbeClocks; - } - } - } - - if (pATI->ProgrammableClock != ATI_CLOCK_FIXED) - { - pATI->ProgrammableClock = ATI_CLOCK_FIXED; - } - else if (pATI->Clock == ATI_CLOCK_NONE) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0, - "Unknown clock generator detected.\n"); - } - else - -#ifndef AVOID_CPIO - - if (pATI->Clock == ATI_CLOCK_CRYSTALS) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "This adapter uses crystals to generate clock frequencies.\n"); - } - else if (pATI->Clock != ATI_CLOCK_VGA) - -#endif /* AVOID_CPIO */ - - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s clock chip detected.\n", ATIClockNames[pATI->Clock]); - } - - if (pATI->Clock != ATI_CLOCK_NONE) - { - /* Replace undivided clocks with specification values */ - for (ClockIndex = 0; - ClockIndex < NumberOfUndividedClocks; - ClockIndex++) - { - /* - * Don't replace clocks that are probed, documented, or set by the - * user to zero. One exception is that we need to override the - * user's value for the spare settings on a crystal-based adapter. - * Another exception is when the user specifies the clock ordering - * intended for the old accelerated servers. - */ - SpecificationClock = - SpecificationClockLine[pATI->Clock][ClockIndex]; - if (SpecificationClock < 0) - break; - if (!ClockMap) - { - if (!pScreenInfo->clock[ClockIndex]) - continue; - if (!SpecificationClock) - { - if (pATI->Clock != ATI_CLOCK_CRYSTALS) - continue; - } - else - { - /* - * Due to the way clock lines are matched, the following - * can prevent the override if the clock is probed, - * documented or set by the user to a value greater than - * maxClock. - */ - if (abs(SpecificationClock - - pScreenInfo->clock[ClockIndex]) > CLOCK_TOLERANCE) - continue; - } - } - pScreenInfo->clock[ClockIndex] = SpecificationClock; - } - - /* Adjust divided clocks */ - for (ClockIndex = NumberOfUndividedClocks; - ClockIndex < NumberOfClocks; - ClockIndex++) - pScreenInfo->clock[ClockIndex] = ATIDivide( - pScreenInfo->clock[ClockIndex % NumberOfUndividedClocks], - (ClockIndex / NumberOfUndividedClocks) + 1, 0, 0); - } - - /* Tell user about fixed clocks */ - xf86ShowClocks(pScreenInfo, pATI->OptionProbeClocks ? X_PROBED : X_CONFIG); - - /* Prevent selection of high clocks, even by V_CLKDIV2 modes */ - for (ClockIndex = 0; ClockIndex < NumberOfClocks; ClockIndex++) - if (pScreenInfo->clock[ClockIndex] > pRange->maxClock) - pScreenInfo->clock[ClockIndex] = 0; -} - -/* - * ATIClockSave -- - * - * This function saves that part of an ATIHWRec that relates to clocks. - */ -void -ATIClockSave -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - if (pScreenInfo->vtSema && (pATI->ProgrammableClock > ATI_CLOCK_FIXED)) - { - -#ifndef AVOID_CPIO - - if (pATIHW->crtc == ATI_CRTC_VGA) - { - pATIHW->ClockMap = ATIVGAProgrammableClockMap; - pATIHW->ClockUnmap = ATIVGAProgrammableClockUnmap; - } - else - -#endif /* AVOID_CPIO */ - - { - pATIHW->ClockMap = ATIProgrammableClockMap; - pATIHW->ClockUnmap = ATIProgrammableClockUnmap; - } - } - else - { - -#ifndef AVOID_CPIO - - if (pATIHW->crtc != ATI_CRTC_VGA) - -#endif /* AVOID_CPIO */ - - { - pATIHW->ClockMap = ATIAcceleratorClockMap; - pATIHW->ClockUnmap = ATIAcceleratorClockUnmap; - } - -#ifndef AVOID_CPIO - - else if (pATI->Chip < ATI_CHIP_68800) - { - pATIHW->ClockMap = ATIVGAWonderClockMap; - pATIHW->ClockUnmap = ATIVGAWonderClockUnmap; - } - else - { - pATIHW->ClockMap = ATIMachVGAClockMap; - pATIHW->ClockUnmap = ATIMachVGAClockUnmap; - } - -#endif /* AVOID_CPIO */ - - } -} - -/* - * ATIClockCalculate -- - * - * This function is called to generate, if necessary, the data needed for clock - * programming, and set clock select bits in various register values. - */ -Bool -ATIClockCalculate -( - int iScreen, - ATIPtr pATI, - ATIHWPtr pATIHW, - DisplayModePtr pMode -) -{ - int N, M, D; - int ClockSelect, N1, MinimumGap; - int Frequency, Multiple; /* Used as temporaries */ - - /* Set default values */ - pATIHW->FeedbackDivider = pATIHW->ReferenceDivider = pATIHW->PostDivider = 0; - - if ((pATI->ProgrammableClock <= ATI_CLOCK_FIXED) || - ((pATI->ProgrammableClock == ATI_CLOCK_CH8398) && - (pMode->ClockIndex < 2))) - { - /* Use a fixed clock */ - ClockSelect = pMode->ClockIndex; - } - else - { - /* Generate clock programme word, using units of kHz */ - MinimumGap = ((unsigned int)(-1)) >> 1; - - /* Loop through reference dividers */ - for (M = pATI->ClockDescriptor.MinM; - M <= pATI->ClockDescriptor.MaxM; - M++) - { - /* Loop through post-dividers */ - for (D = 0; D < pATI->ClockDescriptor.NumD; D++) - { - if (!pATI->ClockDescriptor.PostDividers[D]) - continue; - - /* Limit undivided VCO to maxClock */ - if (pATI->maxClock && - ((pATI->maxClock / pATI->ClockDescriptor.PostDividers[D]) < - pMode->Clock)) - continue; - - /* - * Calculate closest feedback divider and apply its - * restrictions. - */ - Multiple = M * pATI->ReferenceDenominator * - pATI->ClockDescriptor.PostDividers[D]; - N = ATIDivide(pMode->Clock * Multiple, - pATI->ReferenceNumerator, 0, 0); - if (N < pATI->ClockDescriptor.MinN) - N = pATI->ClockDescriptor.MinN; - else if (N > pATI->ClockDescriptor.MaxN) - N = pATI->ClockDescriptor.MaxN; - N -= pATI->ClockDescriptor.NAdjust; - N1 = (N / pATI->ClockDescriptor.N1) * pATI->ClockDescriptor.N2; - if (N > N1) - N = ATIDivide(N1 + 1, pATI->ClockDescriptor.N1, 0, 1); - N += pATI->ClockDescriptor.NAdjust; - N1 += pATI->ClockDescriptor.NAdjust; - - for (; ; N = N1) - { - /* Pick the closest setting */ - Frequency = abs(ATIDivide(N * pATI->ReferenceNumerator, - Multiple, 0, 0) - pMode->Clock); - if ((Frequency < MinimumGap) || - ((Frequency == MinimumGap) && - (pATIHW->FeedbackDivider < N))) - { - /* Save settings */ - pATIHW->FeedbackDivider = N; - pATIHW->ReferenceDivider = M; - pATIHW->PostDivider = D; - MinimumGap = Frequency; - } - - if (N <= N1) - break; - } - } - } - - Multiple = pATIHW->ReferenceDivider * pATI->ReferenceDenominator * - pATI->ClockDescriptor.PostDividers[pATIHW->PostDivider]; - Frequency = pATIHW->FeedbackDivider * pATI->ReferenceNumerator; - Frequency = ATIDivide(Frequency, Multiple, 0, 0); - if (abs(Frequency - pMode->Clock) > CLOCK_TOLERANCE) - { - xf86DrvMsg(iScreen, X_ERROR, - "Unable to programme clock %.3fMHz for mode %s.\n", - (double)(pMode->Clock) / 1000.0, pMode->name); - return FALSE; - } - pMode->SynthClock = Frequency; - ClockSelect = pATI->ClockNumberToProgramme; - - xf86ErrorFVerb(4, - "\n Programming clock %d to %.3fMHz for mode %s." - " N=%d, M=%d, D=%d.\n", - ClockSelect, (double)Frequency / 1000.0, pMode->name, - pATIHW->FeedbackDivider, pATIHW->ReferenceDivider, - pATIHW->PostDivider); - - if (pATI->Chip >= ATI_CHIP_264VTB) - ATIDSPCalculate(pATI, pATIHW, pMode); - } - - /* Set clock select bits, after remapping them */ - pATIHW->clock = ClockSelect; /* Save pre-map clock number */ - ClockSelect = MapClockIndex(pATIHW->ClockMap, ClockSelect); - - switch (pATIHW->crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - pATIHW->genmo = (pATIHW->genmo & 0xF3U) | - ((ClockSelect << 2) & 0x0CU); - - if (pATI->CPIO_VGAWonder) - { - /* Set ATI clock select bits */ - if (pATI->Chip <= ATI_CHIP_18800) - { - pATIHW->b2 = (pATIHW->b2 & 0xBFU) | - ((ClockSelect << 4) & 0x40U); - } - else - { - pATIHW->be = (pATIHW->be & 0xEFU) | - ((ClockSelect << 2) & 0x10U); - if (pATI->Adapter != ATI_ADAPTER_V4) - { - ClockSelect >>= 1; - pATIHW->b9 = (pATIHW->b9 & 0xFDU) | - ((ClockSelect >> 1) & 0x02U); - } - } - - /* Set clock divider bits */ - pATIHW->b8 = (pATIHW->b8 & 0x3FU) | - ((ClockSelect << 3) & 0xC0U); - } - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - pATIHW->clock_cntl = CLOCK_STROBE | - SetBits(ClockSelect, CLOCK_SELECT | CLOCK_DIVIDER); - break; - - default: - break; - } - - return TRUE; -} - -/* - * ATIClockSet -- - * - * This function is called to programme a clock for the mode being set. - */ -void -ATIClockSet -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - CARD32 crtc_gen_cntl, tmp; - CARD8 clock_cntl0; - CARD8 tmp2; - unsigned int Programme; - int N = pATIHW->FeedbackDivider - pATI->ClockDescriptor.NAdjust; - int M = pATIHW->ReferenceDivider - pATI->ClockDescriptor.MAdjust; - int D = pATIHW->PostDivider; - - /* Temporarily switch to accelerator mode */ - crtc_gen_cntl = inr(CRTC_GEN_CNTL); - if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN)) - outr(CRTC_GEN_CNTL, crtc_gen_cntl | CRTC_EXT_DISP_EN); - - switch (pATI->ProgrammableClock) - { - case ATI_CLOCK_ICS2595: - clock_cntl0 = in8(CLOCK_CNTL); - - Programme = (SetBits(pATIHW->clock, ICS2595_CLOCK) | - SetBits(N, ICS2595_FB_DIV) | SetBits(D, ICS2595_POST_DIV)) ^ - ICS2595_TOGGLE; - - ATIDelay(50000); /* 50 milliseconds */ - - (void)xf86DisableInterrupts(); - - /* Send all 20 bits of programme word */ - while (Programme >= CLOCK_BIT) - { - tmp = (Programme & CLOCK_BIT) | CLOCK_STROBE; - out8(CLOCK_CNTL, tmp); - ATIDelay(26); /* 26 microseconds */ - out8(CLOCK_CNTL, tmp | CLOCK_PULSE); - ATIDelay(26); /* 26 microseconds */ - Programme >>= 1; - } - - xf86EnableInterrupts(); - - /* Restore register */ - out8(CLOCK_CNTL, clock_cntl0 | CLOCK_STROBE); - break; - - case ATI_CLOCK_STG1703: - (void)ATIGetDACCmdReg(pATI); - (void)in8(M64_DAC_MASK); - out8(M64_DAC_MASK, (pATIHW->clock << 1) + 0x20U); - out8(M64_DAC_MASK, 0); - out8(M64_DAC_MASK, SetBits(N, 0xFFU)); - out8(M64_DAC_MASK, SetBits(M, 0x1FU) | SetBits(D, 0xE0U)); - break; - - case ATI_CLOCK_CH8398: - tmp = inr(DAC_CNTL) | (DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3); - outr(DAC_CNTL, tmp); - out8(M64_DAC_WRITE, pATIHW->clock); - out8(M64_DAC_DATA, SetBits(N, 0xFFU)); - out8(M64_DAC_DATA, SetBits(M, 0x3FU) | SetBits(D, 0xC0U)); - out8(M64_DAC_MASK, 0x04U); - outr(DAC_CNTL, tmp & ~(DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3)); - tmp2 = in8(M64_DAC_WRITE); - out8(M64_DAC_WRITE, (tmp2 & 0x70U) | 0x80U); - outr(DAC_CNTL, tmp & ~DAC_EXT_SEL_RS2); - break; - - case ATI_CLOCK_INTERNAL: - /* Reset VCLK generator */ - ATIMach64PutPLLReg(PLL_VCLK_CNTL, pATIHW->pll_vclk_cntl); - - /* Set post-divider */ - tmp2 = pATIHW->clock << 1; - tmp = ATIMach64GetPLLReg(PLL_VCLK_POST_DIV); - tmp &= ~(0x03U << tmp2); - tmp |= SetBits(D, 0x03U) << tmp2; - ATIMach64PutPLLReg(PLL_VCLK_POST_DIV, tmp); - - /* Set extended post-divider */ - tmp = ATIMach64GetPLLReg(PLL_XCLK_CNTL); - tmp &= ~(SetBits(1, PLL_VCLK0_XDIV) << pATIHW->clock); - tmp |= SetBits(D >> 2, PLL_VCLK0_XDIV) << pATIHW->clock; - ATIMach64PutPLLReg(PLL_XCLK_CNTL, tmp); - - /* Set feedback divider */ - tmp = PLL_VCLK0_FB_DIV + pATIHW->clock; - ATIMach64PutPLLReg(tmp, SetBits(N, 0xFFU)); - - /* End VCLK generator reset */ - ATIMach64PutPLLReg(PLL_VCLK_CNTL, - pATIHW->pll_vclk_cntl & ~PLL_VCLK_RESET); - - /* Reset write bit */ - ATIMach64AccessPLLReg(pATI, 0, FALSE); - break; - - case ATI_CLOCK_ATT20C408: - (void)ATIGetDACCmdReg(pATI); - tmp = in8(M64_DAC_MASK); - (void)ATIGetDACCmdReg(pATI); - out8(M64_DAC_MASK, tmp | 1); - out8(M64_DAC_WRITE, 1); - out8(M64_DAC_MASK, tmp | 9); - ATIDelay(400); /* 400 microseconds */ - tmp2 = (pATIHW->clock << 2) + 0x40U; - out8(M64_DAC_WRITE, tmp2); - out8(M64_DAC_MASK, SetBits(N, 0xFFU)); - out8(M64_DAC_WRITE, ++tmp2); - out8(M64_DAC_MASK, SetBits(M, 0x3FU) | SetBits(D, 0xC0U)); - out8(M64_DAC_WRITE, ++tmp2); - out8(M64_DAC_MASK, 0x77U); - ATIDelay(400); /* 400 microseconds */ - out8(M64_DAC_WRITE, 1); - out8(M64_DAC_MASK, tmp); - break; - - case ATI_CLOCK_IBMRGB514: - /* - * Here, only update in-core data. It will be written out later by - * ATIRGB514Set(). - */ - tmp = (pATIHW->clock << 1) + 0x20U; - pATIHW->ibmrgb514[tmp] = - (SetBits(N, 0x3FU) | SetBits(D, 0xC0U)) ^ 0xC0U; - pATIHW->ibmrgb514[tmp + 1] = SetBits(M, 0x3FU); - break; - - default: - break; - } - - (void)in8(M64_DAC_WRITE); /* Clear DAC counter */ - - /* Restore register */ - if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN)) - outr(CRTC_GEN_CNTL, crtc_gen_cntl); -} diff --git a/src/aticlock.h b/src/aticlock.h deleted file mode 100644 index 641ba695..00000000 --- a/src/aticlock.h +++ /dev/null @@ -1,86 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/aticlock.h,v 1.8 2003/01/01 19:16:31 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATICLOCK_H___ -#define ___ATICLOCK_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -/* - * Definitions related to non-programmable clock generators. - */ -typedef enum -{ - ATI_CLOCK_NONE = 0, - ATI_CLOCK_VGA = 1, - ATI_CLOCK_CRYSTALS = 2, - ATI_CLOCK_18810, - ATI_CLOCK_18811_0, - ATI_CLOCK_18811_1, - ATI_CLOCK_2494AM, - ATI_CLOCK_MACH64A, - ATI_CLOCK_MACH64B, - ATI_CLOCK_MACH64C -} ATIClockType; -extern const char *ATIClockNames[]; - -/* - * Definitions related to programmable clock generators. - */ -typedef enum -{ - ATI_CLOCK_UNKNOWN = -1, - ATI_CLOCK_FIXED = 0, /* Further described by ATIClockType */ - ATI_CLOCK_ICS2595, - ATI_CLOCK_STG1703, - ATI_CLOCK_CH8398, - ATI_CLOCK_INTERNAL, - ATI_CLOCK_ATT20C408, - ATI_CLOCK_IBMRGB514, - ATI_CLOCK_MAX /* Must be last */ -} ATIProgrammableClockType; - -typedef struct -{ - CARD16 MinN, MaxN; /* Feedback divider and ... */ - CARD16 NAdjust; /* ... its adjustment and ... */ - CARD16 N1, N2; /* ... its restrictions */ - CARD16 MinM, MaxM; /* Reference divider and ... */ - CARD16 MAdjust; /* ... its adjustment */ - CARD16 NumD, *PostDividers; /* Post-dividers */ - const char *ClockName; -} ClockRec, *ClockPtr; -extern ClockRec ATIClockDescriptors[]; - -extern void ATIClockPreInit FunctionPrototype((ScrnInfoPtr, ATIPtr, GDevPtr, - ClockRangePtr)); -extern void ATIClockSave FunctionPrototype((ScrnInfoPtr, ATIPtr, - ATIHWPtr)); -extern Bool ATIClockCalculate FunctionPrototype((int, ATIPtr, ATIHWPtr, - DisplayModePtr)); -extern void ATIClockSet FunctionPrototype((ATIPtr, ATIHWPtr)); - -#endif /* ___ATICLOCK_H___ */ diff --git a/src/aticonfig.c b/src/aticonfig.c deleted file mode 100644 index eb1f428c..00000000 --- a/src/aticonfig.c +++ /dev/null @@ -1,289 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/aticonfig.c,v 1.14 2003/04/30 21:43:31 tsi Exp $*/ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atichip.h" -#include "aticonfig.h" -#include "aticursor.h" -#include "atioption.h" -#include "atistruct.h" - -#include "mach64_common.h" - -/* - * Non-publicised XF86Config options. - */ -typedef enum -{ - ATI_OPTION_CRT_SCREEN, /* Legacy negation of "PanelDisplay" */ - ATI_OPTION_DEVEL, /* Intentionally undocumented */ - ATI_OPTION_BLEND, /* Force horizontal blending of small modes */ - ATI_OPTION_LCDSYNC /* Use XF86Config panel mode porches */ -} ATIPrivateOptionType; - -/* - * ATIProcessOptions -- - * - * This function extracts options from what was parsed out of the XF86Config - * file. - */ -void -ATIProcessOptions -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - OptionInfoPtr PublicOption = xnfalloc(ATIPublicOptionSize); - OptionInfoRec PrivateOption[] = - { - { /* Negation of "PanelDisplay" public option */ - ATI_OPTION_CRT_SCREEN, - "crtscreen", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { /* ON: Horizontally blend most modes */ - ATI_OPTION_BLEND, /* OFF: Use pixel replication more often */ - "lcdblend", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { /* ON: Use XF86Config porch timings */ - ATI_OPTION_LCDSYNC, /* OFF: Use porches from mode on entry */ - "lcdsync", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { /* ON: Ease exploration of loose ends */ - ATI_OPTION_DEVEL, /* OFF: Fit for public consumption */ - "tsi", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { - -1, - NULL, - OPTV_NONE, - {0, }, - FALSE - } - }; - - (void)memcpy(PublicOption, ATIPublicOptions, ATIPublicOptionSize); - -# define Accel PublicOption[ATI_OPTION_ACCEL].value.bool -# define Blend PrivateOption[ATI_OPTION_BLEND].value.bool -# define CRTDisplay PublicOption[ATI_OPTION_CRT_DISPLAY].value.bool -# define CRTScreen PrivateOption[ATI_OPTION_CRT_SCREEN].value.bool -# define CSync PublicOption[ATI_OPTION_CSYNC].value.bool -# define Devel PrivateOption[ATI_OPTION_DEVEL].value.bool -# define HWCursor PublicOption[ATI_OPTION_HWCURSOR].value.bool - -#ifndef AVOID_CPIO - -# define Linear PublicOption[ATI_OPTION_LINEAR].value.bool - -#endif /* AVOID_CPIO */ - -#ifdef XF86DRI - -# define IsPCI PublicOption[ATI_OPTION_IS_PCI].value.bool -# define DMAMode PublicOption[ATI_OPTION_DMA_MODE].value.str -# define AGPMode PublicOption[ATI_OPTION_AGP_MODE].value.num -# define AGPSize PublicOption[ATI_OPTION_AGP_SIZE].value.num -# define LocalTex PublicOption[ATI_OPTION_LOCAL_TEXTURES].value.bool -# define BufferSize PublicOption[ATI_OPTION_BUFFER_SIZE].value.num - -#endif /* XF86DRI */ - -# define CacheMMIO PublicOption[ATI_OPTION_MMIO_CACHE].value.bool -# define TestCacheMMIO PublicOption[ATI_OPTION_TEST_MMIO_CACHE].value.bool -# define PanelDisplay PublicOption[ATI_OPTION_PANEL_DISPLAY].value.bool -# define ProbeClocks PublicOption[ATI_OPTION_PROBE_CLOCKS].value.bool -# define ShadowFB PublicOption[ATI_OPTION_SHADOW_FB].value.bool -# define SWCursor PublicOption[ATI_OPTION_SWCURSOR].value.bool -# define LCDSync PrivateOption[ATI_OPTION_LCDSYNC].value.bool - -# define ReferenceClock \ - PublicOption[ATI_OPTION_REFERENCE_CLOCK].value.freq.freq - - /* Pick up XF86Config options */ - xf86CollectOptions(pScreenInfo, NULL); - - /* Set non-zero defaults */ - -#ifndef AVOID_CPIO - - if (pATI->Adapter >= ATI_ADAPTER_MACH64) - -#endif /* AVOID_CPIO */ - - { - Accel = CacheMMIO = HWCursor = TRUE; - -#ifndef AVOID_CPIO - - Linear = TRUE; - -#endif /* AVOID_CPIO */ - - } - - ReferenceClock = ((double)157500000.0) / ((double)11.0); - -#ifndef AVOID_CPIO - - if (pATI->PCIInfo) - -#endif /* AVOID_CPIO */ - - { - ShadowFB = TRUE; - } - - Blend = PanelDisplay = TRUE; - DMAMode = "mmio"; - - xf86ProcessOptions(pScreenInfo->scrnIndex, pScreenInfo->options, - PublicOption); - xf86ProcessOptions(pScreenInfo->scrnIndex, pScreenInfo->options, - PrivateOption); - -#ifndef AVOID_CPIO - - /* Disable linear apertures if the OS doesn't support them */ - if (!xf86LinearVidMem() && Linear) - { - if (PublicOption[ATI_OPTION_LINEAR].found) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "OS does not support linear apertures.\n"); - Linear = FALSE; - } - -#endif /* AVOID_CPIO */ - - /* Move option values into driver private structure */ - pATI->OptionAccel = Accel; - pATI->OptionBlend = Blend; - pATI->OptionCRTDisplay = CRTDisplay; - pATI->OptionCSync = CSync; - pATI->OptionDevel = Devel; - -#ifndef AVOID_CPIO - - pATI->OptionLinear = Linear; - -#endif /* AVOID_CPIO */ - - pATI->OptionMMIOCache = CacheMMIO; - pATI->OptionTestMMIOCache = TestCacheMMIO; - pATI->OptionProbeClocks = ProbeClocks; - pATI->OptionShadowFB = ShadowFB; - pATI->OptionLCDSync = LCDSync; - - /* "CRTScreen" is now "NoPanelDisplay" */ - if ((PanelDisplay != CRTScreen) || - PublicOption[ATI_OPTION_PANEL_DISPLAY].found) - pATI->OptionPanelDisplay = PanelDisplay; - else - pATI->OptionPanelDisplay = !CRTScreen; - -#ifdef XF86DRI - - pATI->OptionIsPCI = IsPCI; - pATI->OptionAGPMode = AGPMode; - pATI->OptionAGPSize = AGPSize; - pATI->OptionLocalTextures = LocalTex; - pATI->OptionBufferSize = BufferSize; - - if (strcasecmp(DMAMode, "async")==0) - pATI->OptionDMAMode = MACH64_MODE_DMA_ASYNC; - else if (strcasecmp(DMAMode, "sync")==0) - pATI->OptionDMAMode = MACH64_MODE_DMA_SYNC; - else if (strcasecmp(DMAMode, "mmio")==0 ) - pATI->OptionDMAMode = MACH64_MODE_MMIO; - else { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unkown dma_mode: '%s'\n", DMAMode); - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Valid dma_mode options are: 'async','sync','mmio'\n"); - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Defaulting to async DMA mode\n"); - pATI->OptionDMAMode = MACH64_MODE_DMA_ASYNC; - } - -#endif /* XF86DRI */ - - /* Validate and set cursor options */ - pATI->Cursor = ATI_CURSOR_SOFTWARE; - if (SWCursor || !HWCursor) - { - if (HWCursor && PublicOption[ATI_OPTION_HWCURSOR].found) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Option \"sw_cursor\" overrides Option \"hw_cursor\".\n"); - } - else if (pATI->Chip < ATI_CHIP_264CT) - { - if (HWCursor && PublicOption[ATI_OPTION_HWCURSOR].found) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Option \"hw_cursor\" not supported in this configuration.\n"); - } - else - { - pATI->Cursor = ATI_CURSOR_HARDWARE; - } - - /* Only set the reference clock if it hasn't already been determined */ - if (!pATI->ReferenceNumerator || !pATI->ReferenceDenominator) - { - switch ((int)(ReferenceClock / ((double)100000.0))) - { - case 143: - pATI->ReferenceNumerator = 157500; - pATI->ReferenceDenominator = 11; - break; - - case 286: - pATI->ReferenceNumerator = 315000; - pATI->ReferenceDenominator = 11; - break; - - default: - pATI->ReferenceNumerator = - (int)(ReferenceClock / ((double)1000.0)); - pATI->ReferenceDenominator = 1; - break; - } - } - - xfree(PublicOption); -} diff --git a/src/aticonfig.h b/src/aticonfig.h deleted file mode 100644 index bf9c24b2..00000000 --- a/src/aticonfig.h +++ /dev/null @@ -1,34 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/aticonfig.h,v 1.5 2003/01/01 19:16:31 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATICONFIG_H___ -#define ___ATICONFIG_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -extern void ATIProcessOptions FunctionPrototype((ScrnInfoPtr, ATIPtr)); - -#endif /* ___ATICONFIG_H___ */ diff --git a/src/aticonsole.c b/src/aticonsole.c deleted file mode 100644 index 1d65df7c..00000000 --- a/src/aticonsole.c +++ /dev/null @@ -1,427 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/aticonsole.c,v 1.21 2003/07/24 22:08:27 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Manuel Teira - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#include "ati.h" -#include "atiadapter.h" -#include "aticonsole.h" -#include "aticrtc.h" -#include "atii2c.h" -#include "atilock.h" -#include "atimach64.h" -#include "atimach64io.h" -#include "atimode.h" -#include "atistruct.h" -#include "ativga.h" -#include "atividmem.h" - -#include "mach64_common.h" - - - -#include "xf86.h" - -/* - * ATISaveScreen -- - * - * This function is a screen saver hook for DIX. - */ -Bool -ATISaveScreen -( - ScreenPtr pScreen, - int Mode -) -{ - ScrnInfoPtr pScreenInfo; - ATIPtr pATI; - - if ((Mode != SCREEN_SAVER_ON) && (Mode != SCREEN_SAVER_CYCLE)) - SetTimeSinceLastInputEvent(); - - if (!pScreen) - return TRUE; - - pScreenInfo = xf86Screens[pScreen->myNum]; - if (!pScreenInfo->vtSema) - return TRUE; - - pATI = ATIPTR(pScreenInfo); - switch (pATI->NewHW.crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - ATIVGASaveScreen(pATI, Mode); - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - ATIMach64SaveScreen(pATI, Mode); - break; - - default: - break; - } - - return TRUE; -} - -/* - * ATISetDPMSMode -- - * - * This function sets the adapter's VESA Display Power Management Signaling - * mode. - */ -void -ATISetDPMSMode -( - ScrnInfoPtr pScreenInfo, - int DPMSMode, - int flags -) -{ - ATIPtr pATI; - - if (!pScreenInfo || !pScreenInfo->vtSema) - return; - - pATI = ATIPTR(pScreenInfo); - - switch (pATI->Adapter) - { - case ATI_ADAPTER_MACH64: - ATIMach64SetDPMSMode(pScreenInfo, pATI, DPMSMode); - break; - - default: - -#ifndef AVOID_CPIO - - /* Assume EGA/VGA */ - ATIVGASetDPMSMode(pATI, DPMSMode); - break; - - case ATI_ADAPTER_NONE: - case ATI_ADAPTER_8514A: - case ATI_ADAPTER_MACH8: - -#endif /* AVOID_CPIO */ - - break; - } -} - -/* - * ATIEnterGraphics -- - * - * This function sets the hardware to a graphics video state. - */ -Bool -ATIEnterGraphics -( - ScreenPtr pScreen, - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - /* Map apertures */ - if (!ATIMapApertures(pScreenInfo->scrnIndex, pATI)) - return FALSE; - - /* Unlock device */ - ATIUnlock(pATI); - - /* Calculate hardware data */ - if (pScreen && - !ATIModeCalculate(pScreenInfo->scrnIndex, pATI, &pATI->NewHW, - pScreenInfo->currentMode)) - return FALSE; - - pScreenInfo->vtSema = TRUE; - - /* Save current state */ - ATIModeSave(pScreenInfo, pATI, &pATI->OldHW); - - /* Set graphics state */ - ATIModeSet(pScreenInfo, pATI, &pATI->NewHW); - - /* Possibly blank the screen */ - if (pScreen) - (void)ATISaveScreen(pScreen, SCREEN_SAVER_ON); - - /* Position the screen */ - (*pScreenInfo->AdjustFrame)(pScreenInfo->scrnIndex, - pScreenInfo->frameX0, pScreenInfo->frameY0, 0); - - SetTimeSinceLastInputEvent(); - - return TRUE; -} - -/* - * ATILeaveGraphics -- - * - * This function restores the hardware to its previous state. - */ -void -ATILeaveGraphics -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - if (pScreenInfo->vtSema) - { - /* If not exiting, save graphics video state */ - if (!xf86ServerIsExiting()) - ATIModeSave(pScreenInfo, pATI, &pATI->NewHW); - - /* Restore mode in effect on server entry */ - ATIModeSet(pScreenInfo, pATI, &pATI->OldHW); - - pScreenInfo->vtSema = FALSE; - } - - /* Lock device */ - ATILock(pATI); - - /* Unmap apertures */ - -#ifdef AVOID_DGA - - if (!pATI->Closeable) - -#else /* AVOID_DGA */ - - if (!pATI->Closeable || !pATI->nDGAMode) - -#endif /* AVOID_DGA */ - - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - - SetTimeSinceLastInputEvent(); -} - -/* - * ATISwitchMode -- - * - * This function switches to another graphics video state. - */ -Bool -ATISwitchMode -( - int iScreen, - DisplayModePtr pMode, - int flags -) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[iScreen]; - ATIPtr pATI = ATIPTR(pScreenInfo); - - /* Calculate new hardware data */ - if (!ATIModeCalculate(iScreen, pATI, &pATI->NewHW, pMode)) - return FALSE; - - /* Set new hardware state */ - if (pScreenInfo->vtSema) - { - pScreenInfo->currentMode = pMode; - -#ifdef XF86DRI - - if (pATI->directRenderingEnabled) - { - DRILock(pScreenInfo->pScreen,0); - ATIDRIWaitForIdle(pATI); - } - -#endif /* XF86DRI */ - - ATIModeSet(pScreenInfo, pATI, &pATI->NewHW); - -#ifdef XF86DRI - - if (pATI->directRenderingEnabled) - { - DRIUnlock(pScreenInfo->pScreen); - } - -#endif /* XF86DRI */ - - } - - SetTimeSinceLastInputEvent(); - - return TRUE; -} - -/* - * ATIEnterVT -- - * - * This function sets the server's virtual console to a graphics video state. - */ -Bool -ATIEnterVT -( - int iScreen, - int flags -) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[iScreen]; - ScreenPtr pScreen = pScreenInfo->pScreen; - ATIPtr pATI = ATIPTR(pScreenInfo); - PixmapPtr pScreenPixmap; - DevUnion PixmapPrivate; - Bool Entered; - - if (!ATIEnterGraphics(NULL, pScreenInfo, pATI)) - return FALSE; - - /* The rest of this isn't needed for shadowfb */ - if (pATI->OptionShadowFB) - { - -#ifdef XF86DRI - - if (pATI->directRenderingEnabled) - { - DRIUnlock(pScreen); - } - -#endif /* XF86DRI */ - - return TRUE; - } - -#ifndef AVOID_CPIO - - /* If used, modify banking interface */ - if (!miModifyBanking(pScreen, &pATI->BankInfo)) - return FALSE; - -#endif /* AVOID_CPIO */ - - pScreenPixmap = (*pScreen->GetScreenPixmap)(pScreen); - PixmapPrivate = pScreenPixmap->devPrivate; - if (!PixmapPrivate.ptr) - pScreenPixmap->devPrivate = pScreenInfo->pixmapPrivate; - - /* Tell framebuffer about remapped aperture */ - Entered = (*pScreen->ModifyPixmapHeader)(pScreenPixmap, - -1, -1, -1, -1, -1, pATI->pMemory); - - if (!PixmapPrivate.ptr) - { - pScreenInfo->pixmapPrivate = pScreenPixmap->devPrivate; - pScreenPixmap->devPrivate.ptr = NULL; - } - -#ifdef XF86DRI - - if (pATI->directRenderingEnabled) - { - DRIUnlock(pScreen); - } - -#endif /* XF86DRI */ - - return Entered; -} - -/* - * ATILeaveVT -- - * - * This function restores the server's virtual console to its state on server - * entry. - */ -void -ATILeaveVT -( - int iScreen, - int flags -) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[iScreen]; - ScreenPtr pScreen = pScreenInfo->pScreen; - ATIPtr pATI = ATIPTR(pScreenInfo); - -#ifdef XF86DRI - - if (pATI->directRenderingEnabled) - { - DRILock(pScreen,0); - ATIDRIWaitForIdle(pATI); - } - -#endif /* XF86DRI */ - - ATILeaveGraphics(pScreenInfo, ATIPTR(pScreenInfo)); -} - -/* - * ATIFreeScreen -- - * - * This function frees all driver data related to a screen. - */ -void -ATIFreeScreen -( - int iScreen, - int flags -) -{ - ScreenPtr pScreen = screenInfo.screens[iScreen]; - ScrnInfoPtr pScreenInfo = xf86Screens[iScreen]; - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATII2CFreeScreen(iScreen); - - if (pATI->Closeable) - (void)(*pScreen->CloseScreen)(iScreen, pScreen); - - ATILeaveGraphics(pScreenInfo, pATI); - -#ifndef AVOID_CPIO - - xfree(pATI->OldHW.frame_buffer); - xfree(pATI->NewHW.frame_buffer); - -#endif /* AVOID_CPIO */ - - xfree(pATI->pShadow); - -#ifndef AVOID_DGA - - xfree(pATI->pDGAMode); - -#endif /* AVOID_DGA */ - - xfree(pATI); - pScreenInfo->driverPrivate = NULL; -} diff --git a/src/aticonsole.h b/src/aticonsole.h deleted file mode 100644 index 8157d834..00000000 --- a/src/aticonsole.h +++ /dev/null @@ -1,46 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/aticonsole.h,v 1.9 2003/01/01 19:16:31 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATICONSOLE_H___ -#define ___ATICONSOLE_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -extern Bool ATISaveScreen FunctionPrototype((ScreenPtr, int)); -extern void ATISetDPMSMode FunctionPrototype((ScrnInfoPtr, int, int)); - -extern Bool ATIEnterGraphics FunctionPrototype((ScreenPtr, ScrnInfoPtr, - ATIPtr)); -extern void ATILeaveGraphics FunctionPrototype((ScrnInfoPtr, ATIPtr)); - -extern Bool ATISwitchMode FunctionPrototype((int, DisplayModePtr, int)); - -extern Bool ATIEnterVT FunctionPrototype((int, int)); -extern void ATILeaveVT FunctionPrototype((int, int)); - -extern void ATIFreeScreen FunctionPrototype((int, int)); - -#endif /* ___ATICONSOLE_H___ */ diff --git a/src/aticrtc.h b/src/aticrtc.h deleted file mode 100644 index 9f6ec388..00000000 --- a/src/aticrtc.h +++ /dev/null @@ -1,43 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/aticrtc.h,v 1.8 2003/01/01 19:16:31 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATICRTC_H___ -#define ___ATICRTC_H___ 1 - -/* - * CRTC related definitions. - */ -typedef enum -{ - -#ifndef AVOID_CPIO - - ATI_CRTC_VGA, /* Use VGA CRTC */ - ATI_CRTC_8514, /* Use 8514/Mach8/Mach32 accelerator CRTC */ - -#endif /* AVOID_CPIO */ - - ATI_CRTC_MACH64 /* Use Mach64 accelerator CRTC */ -} ATICRTCType; - -#endif /* ___ATICRTC_H___ */ diff --git a/src/aticursor.c b/src/aticursor.c deleted file mode 100644 index a4837e47..00000000 --- a/src/aticursor.c +++ /dev/null @@ -1,75 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/aticursor.c,v 1.4 2003/04/23 21:51:27 tsi Exp $ */ -/* - * Copyright 2001 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "atiadapter.h" -#include "aticursor.h" -#include "atimach64cursor.h" -#include "atistruct.h" - -#include "xf86.h" - -/* - * ATIInitializeCursor -- - * - * This function initialises the screen cursor. - */ -Bool -ATIInitializeCursor -( - ScreenPtr pScreen, - ATIPtr pATI -) -{ - /* Initialise software cursor */ - if (!miDCInitialize(pScreen, xf86GetPointerScreenFuncs())) - return FALSE; - - if (pATI->Cursor == ATI_CURSOR_SOFTWARE) - return TRUE; - - if (!(pATI->pCursorInfo = xf86CreateCursorInfoRec())) - return FALSE; - - switch (pATI->Adapter) - { - case ATI_ADAPTER_MACH64: - if (ATIMach64CursorInit(pATI->pCursorInfo)) - break; - /* Fall through */ - - default: - xf86DestroyCursorInfoRec(pATI->pCursorInfo); - pATI->pCursorInfo = NULL; - return FALSE; - } - - if (xf86InitCursor(pScreen, pATI->pCursorInfo)) - { - xf86SetSilkenMouse(pScreen); - return TRUE; - } - - xf86DestroyCursorInfoRec(pATI->pCursorInfo); - pATI->pCursorInfo = NULL; - return FALSE; -} diff --git a/src/aticursor.h b/src/aticursor.h deleted file mode 100644 index 9f8790dc..00000000 --- a/src/aticursor.h +++ /dev/null @@ -1,44 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/aticursor.h,v 1.3 2003/01/01 19:16:31 tsi Exp $ */ -/* - * Copyright 2001 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATICURSOR_H___ -#define ___ATICURSOR_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "screenint.h" - -/* - * Cursor related definitions. - */ -typedef enum -{ - ATI_CURSOR_SOFTWARE, /* Software cursor */ - ATI_CURSOR_HARDWARE, /* Hardware cursor provided by CRTC */ - ATI_CURSOR_DAC /* Hardware cursor provided by RAMDAC */ -} ATICursorType; - -extern Bool ATIInitializeCursor FunctionPrototype((ScreenPtr, ATIPtr)); - -#endif /* ___ATICURSOR_H___ */ diff --git a/src/atidac.c b/src/atidac.c deleted file mode 100644 index 1d3e943b..00000000 --- a/src/atidac.c +++ /dev/null @@ -1,522 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atidac.c,v 1.18 2003/02/25 17:58:13 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atidac.h" -#include "atimach64io.h" -#include "atimono.h" - -/* - * RAMDAC-related definitions. - */ -const SymTabRec ATIDACDescriptors[] = -{ /* Keep this table in ascending DACType order */ - {ATI_DAC_ATI68830, "ATI 68830 or similar"}, - {ATI_DAC_SC11483, "Sierra 11483 or similar"}, - {ATI_DAC_ATI68875, "ATI 68875 or similar"}, - {ATI_DAC_TVP3026_A, "TI ViewPoint3026 or similar"}, - {ATI_DAC_GENERIC, "Brooktree 476 or similar"}, - {ATI_DAC_BT481, "Brooktree 481 or similar"}, - {ATI_DAC_ATT20C491, "AT&T 20C491 or similar"}, - {ATI_DAC_SC15026, "Sierra 15026 or similar"}, - {ATI_DAC_MU9C1880, "Music 9C1880 or similar"}, - {ATI_DAC_IMSG174, "Inmos G174 or similar"}, - {ATI_DAC_ATI68860_B, "ATI 68860 (Revision B) or similar"}, - {ATI_DAC_ATI68860_C, "ATI 68860 (Revision C) or similar"}, - {ATI_DAC_TVP3026_B, "TI ViewPoint3026 or similar"}, - {ATI_DAC_STG1700, "SGS-Thompson 1700 or similar"}, - {ATI_DAC_ATT20C498, "AT&T 20C498 or similar"}, - {ATI_DAC_STG1702, "SGS-Thompson 1702 or similar"}, - {ATI_DAC_SC15021, "Sierra 15021 or similar"}, - {ATI_DAC_ATT21C498, "AT&T 21C498 or similar"}, - {ATI_DAC_STG1703, "SGS-Thompson 1703 or similar"}, - {ATI_DAC_CH8398, "Chrontel 8398 or similar"}, - {ATI_DAC_ATT20C408, "AT&T 20C408 or similar"}, - {ATI_DAC_INTERNAL, "Internal"}, - {ATI_DAC_IBMRGB514, "IBM RGB 514 or similar"}, - {ATI_DAC_UNKNOWN, "Unknown"} /* Must be last */ -}; - -#ifndef AVOID_CPIO - -/* - * ATISetDACIOPorts -- - * - * This function sets up DAC access I/O port numbers. - */ -void -ATISetDACIOPorts -( - ATIPtr pATI, - ATICRTCType crtc -) -{ - switch (crtc) - { - case ATI_CRTC_VGA: - pATI->CPIO_DAC_DATA = VGA_DAC_DATA; - pATI->CPIO_DAC_MASK = VGA_DAC_MASK; - pATI->CPIO_DAC_READ = VGA_DAC_READ; - pATI->CPIO_DAC_WRITE = VGA_DAC_WRITE; - pATI->CPIO_DAC_WAIT = GENS1(pATI->CPIO_VGABase); - break; - - case ATI_CRTC_8514: - pATI->CPIO_DAC_DATA = IBM_DAC_DATA; - pATI->CPIO_DAC_MASK = IBM_DAC_MASK; - pATI->CPIO_DAC_READ = IBM_DAC_READ; - pATI->CPIO_DAC_WRITE = IBM_DAC_WRITE; - pATI->CPIO_DAC_WAIT = pATI->CPIO_DAC_MASK; - break; - - case ATI_CRTC_MACH64: - pATI->CPIO_DAC_DATA = ATIIOPort(DAC_REGS) + 1; - pATI->CPIO_DAC_MASK = ATIIOPort(DAC_REGS) + 2; - pATI->CPIO_DAC_READ = ATIIOPort(DAC_REGS) + 3; - pATI->CPIO_DAC_WRITE = ATIIOPort(DAC_REGS) + 0; - pATI->CPIO_DAC_WAIT = pATI->CPIOBase; - break; - - default: - break; - } -} - -#endif /* AVOID_CPIO */ - -/* - * ATIGetDACCmdReg -- - * - * Setup to access a RAMDAC's command register. - */ -CARD8 -ATIGetDACCmdReg -( - ATIPtr pATI -) -{ - -#ifdef AVOID_CPIO - - (void)in8(M64_DAC_WRITE); /* Reset to PEL mode */ - (void)in8(M64_DAC_MASK); - (void)in8(M64_DAC_MASK); - (void)in8(M64_DAC_MASK); - return in8(M64_DAC_MASK); - -#else /* AVOID_CPIO */ - - (void)inb(pATI->CPIO_DAC_WRITE); /* Reset to PEL mode */ - (void)inb(pATI->CPIO_DAC_MASK); - (void)inb(pATI->CPIO_DAC_MASK); - (void)inb(pATI->CPIO_DAC_MASK); - return inb(pATI->CPIO_DAC_MASK); - -#endif /* AVOID_CPIO */ - -} - -/* - * ATIDACPreInit -- - * - * This function initialises the fields in an ATIHWRec that relate to DACs. - */ -void -ATIDACPreInit -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - int Index, Index2; - CARD8 maxColour = (1 << pATI->rgbBits) - 1; - - pATIHW->dac_read = pATIHW->dac_write = 0x00U; - pATIHW->dac_mask = 0xFFU; - - /* - * Set colour lookup table. The first entry has already been zeroed out. - */ - if (pATI->depth > 8) - for (Index = 1; Index < (NumberOf(pATIHW->lut) / 3); Index++) - { - Index2 = Index * 3; - pATIHW->lut[Index2 + 0] = - pATIHW->lut[Index2 + 1] = - pATIHW->lut[Index2 + 2] = Index; - } - else - { - /* - * Initialise hardware colour map so that use of uninitialised - * software colour map entries can easily be seen. For 256-colour - * modes, this doesn't remain effective for very long... - */ - pATIHW->lut[3] = pATIHW->lut[4] = pATIHW->lut[5] = 0xFFU; - for (Index = 2; Index < (NumberOf(pATIHW->lut) / 3); Index++) - { - Index2 = Index * 3; - pATIHW->lut[Index2 + 0] = maxColour; - pATIHW->lut[Index2 + 1] = 0x00U; - pATIHW->lut[Index2 + 2] = maxColour; - } - -#ifndef AVOID_CPIO - - if (pATI->depth == 1) - { - rgb blackColour = pScreenInfo->display->blackColour, - whiteColour = pScreenInfo->display->whiteColour; - - if (blackColour.red > maxColour) - blackColour.red = maxColour; - if (blackColour.green > maxColour) - blackColour.green = maxColour; - if (blackColour.blue > maxColour) - blackColour.blue = maxColour; - if (whiteColour.red > maxColour) - whiteColour.red = maxColour; - if (whiteColour.green > maxColour) - whiteColour.green = maxColour; - if (whiteColour.blue > maxColour) - whiteColour.blue = maxColour; - - if ((blackColour.red == whiteColour.red) && - (blackColour.green == whiteColour.green) && - (blackColour.blue == whiteColour.blue)) - { - blackColour.red ^= maxColour; - blackColour.green ^= maxColour; - blackColour.blue ^= maxColour; - } - - pATIHW->lut[(MONO_BLACK * 3) + 0] = blackColour.red; - pATIHW->lut[(MONO_BLACK * 3) + 1] = blackColour.green; - pATIHW->lut[(MONO_BLACK * 3) + 2] = blackColour.blue; - pATIHW->lut[(MONO_WHITE * 3) + 0] = whiteColour.red; - pATIHW->lut[(MONO_WHITE * 3) + 1] = whiteColour.green; - pATIHW->lut[(MONO_WHITE * 3) + 2] = whiteColour.blue; - } - - if (pATIHW->crtc == ATI_CRTC_VGA) - { - /* Initialise overscan to black */ - Index = pATIHW->attr[17] * 3; - pATIHW->lut[Index + 0] = - pATIHW->lut[Index + 1] = - pATIHW->lut[Index + 2] = 0x00U; - } - -#endif /* AVOID_CPIO */ - - } -} - -/* - * ATIDACSave -- - * - * This function is called to save the current RAMDAC state into an ATIHWRec - * structure occurrence. - */ -void -ATIDACSave -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - int Index; - -#ifdef AVOID_CPIO - - pATIHW->dac_read = in8(M64_DAC_READ); - DACDelay; - pATIHW->dac_write = in8(M64_DAC_WRITE); - DACDelay; - pATIHW->dac_mask = in8(M64_DAC_MASK); - DACDelay; - - /* Save DAC's colour lookup table */ - out8(M64_DAC_MASK, 0xFFU); - DACDelay; - out8(M64_DAC_READ, 0x00U); - DACDelay; - for (Index = 0; Index < NumberOf(pATIHW->lut); Index++) - { - pATIHW->lut[Index] = in8(M64_DAC_DATA); - DACDelay; - } - - out8(M64_DAC_MASK, pATIHW->dac_mask); - DACDelay; - out8(M64_DAC_READ, pATIHW->dac_read); - DACDelay; - -#else /* AVOID_CPIO */ - - ATISetDACIOPorts(pATI, pATIHW->crtc); - - pATIHW->dac_read = inb(pATI->CPIO_DAC_READ); - DACDelay; - pATIHW->dac_write = inb(pATI->CPIO_DAC_WRITE); - DACDelay; - pATIHW->dac_mask = inb(pATI->CPIO_DAC_MASK); - DACDelay; - - /* Save DAC's colour lookup table */ - outb(pATI->CPIO_DAC_MASK, 0xFFU); - DACDelay; - outb(pATI->CPIO_DAC_READ, 0x00U); - DACDelay; - for (Index = 0; Index < NumberOf(pATIHW->lut); Index++) - { - pATIHW->lut[Index] = inb(pATI->CPIO_DAC_DATA); - DACDelay; - } - - outb(pATI->CPIO_DAC_MASK, pATIHW->dac_mask); - DACDelay; - outb(pATI->CPIO_DAC_READ, pATIHW->dac_read); - DACDelay; - -#endif /* AVOID_CPIO */ - -} - -/* - * ATIDACSet -- - * - * This function loads RAMDAC data from an ATIHWRec structure occurrence. - */ -void -ATIDACSet -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - int Index; - -#ifdef AVOID_CPIO - - /* Load DAC's colour lookup table */ - out8(M64_DAC_MASK, 0xFFU); - DACDelay; - out8(M64_DAC_WRITE, 0x00U); - DACDelay; - for (Index = 0; Index < NumberOf(pATIHW->lut); Index++) - { - out8(M64_DAC_DATA, pATIHW->lut[Index]); - DACDelay; - } - - out8(M64_DAC_MASK, pATIHW->dac_mask); - DACDelay; - out8(M64_DAC_READ, pATIHW->dac_read); - DACDelay; - out8(M64_DAC_WRITE, pATIHW->dac_write); - DACDelay; - -#else /* AVOID_CPIO */ - - ATISetDACIOPorts(pATI, pATIHW->crtc); - - /* Load DAC's colour lookup table */ - outb(pATI->CPIO_DAC_MASK, 0xFFU); - DACDelay; - outb(pATI->CPIO_DAC_WRITE, 0x00U); - DACDelay; - for (Index = 0; Index < NumberOf(pATIHW->lut); Index++) - { - outb(pATI->CPIO_DAC_DATA, pATIHW->lut[Index]); - DACDelay; - } - - outb(pATI->CPIO_DAC_MASK, pATIHW->dac_mask); - DACDelay; - outb(pATI->CPIO_DAC_READ, pATIHW->dac_read); - DACDelay; - outb(pATI->CPIO_DAC_WRITE, pATIHW->dac_write); - DACDelay; - -#endif /* AVOID_CPIO */ - -} - -/* - * ATILoadPalette -- - * - * This function updates the RAMDAC's LUT and the in-memory copy of it in - * NewHW. - */ -void -ATILoadPalette -( - ScrnInfoPtr pScreenInfo, - int nColours, - int *Indices, - LOCO *Colours, - VisualPtr pVisual -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - CARD8 *LUTEntry; - int i, j, Index; - - if (((pVisual->class | DynamicClass) == DirectColor) && - ((1 << pVisual->nplanes) > (SizeOf(pATI->NewHW.lut) / 3))) - { - int reds = pVisual->redMask >> pVisual->offsetRed; - int greens = pVisual->greenMask >> pVisual->offsetGreen; - int blues = pVisual->blueMask >> pVisual->offsetBlue; - - int redShift = 8 - pATI->weight.red; - int greenShift = 8 - pATI->weight.green; - int blueShift = 8 - pATI->weight.blue; - - int redMult = 3 << redShift; - int greenMult = 3 << greenShift; - int blueMult = 3 << blueShift; - - int minShift; - - CARD8 fChanged[SizeOf(pATI->NewHW.lut) / 3]; - - (void)memset(fChanged, SizeOf(fChanged), 0); - - minShift = redShift; - if (minShift > greenShift) - minShift = greenShift; - if (minShift > blueShift) - minShift = blueShift; - - for (i = 0; i < nColours; i++) - { - if((Index = Indices[i]) < 0) - continue; - - if (Index <= reds) - { - j = Index * redMult; - pATI->NewHW.lut[j + 0] = Colours[Index].red; - fChanged[j / 3] = TRUE; - } - if (Index <= greens) - { - j = Index * greenMult; - pATI->NewHW.lut[j + 1] = Colours[Index].green; - fChanged[j / 3] = TRUE; - } - if (Index <= blues) - { - j = Index * blueMult; - pATI->NewHW.lut[j + 2] = Colours[Index].blue; - fChanged[j / 3] = TRUE; - } - } - - if (pScreenInfo->vtSema || pATI->currentMode) - { - /* Rewrite LUT entries that could have been changed */ - i = 1 << minShift; - LUTEntry = pATI->NewHW.lut; - - for (Index = 0; - Index < (SizeOf(pATI->NewHW.lut) / 3); - Index += i, LUTEntry += i * 3) - { - if (!fChanged[Index]) - continue; - -#ifdef AVOID_CPIO - - out8(M64_DAC_WRITE, Index); - DACDelay; - out8(M64_DAC_DATA, LUTEntry[0]); - DACDelay; - out8(M64_DAC_DATA, LUTEntry[1]); - DACDelay; - out8(M64_DAC_DATA, LUTEntry[2]); - DACDelay; - -#else /* AVOID_CPIO */ - - outb(pATI->CPIO_DAC_WRITE, Index); - DACDelay; - outb(pATI->CPIO_DAC_DATA, LUTEntry[0]); - DACDelay; - outb(pATI->CPIO_DAC_DATA, LUTEntry[1]); - DACDelay; - outb(pATI->CPIO_DAC_DATA, LUTEntry[2]); - DACDelay; - -#endif /* AVOID_CPIO */ - - } - } - } - else - { - for (i = 0; i < nColours; i++) - { - Index = Indices[i]; - if ((Index < 0) || (Index >= (SizeOf(pATI->NewHW.lut) / 3))) - continue; - - LUTEntry = &pATI->NewHW.lut[Index * 3]; - LUTEntry[0] = Colours[Index].red; - LUTEntry[1] = Colours[Index].green; - LUTEntry[2] = Colours[Index].blue; - - if (pScreenInfo->vtSema || pATI->currentMode) - { - -#ifdef AVOID_CPIO - - out8(M64_DAC_WRITE, Index); - DACDelay; - out8(M64_DAC_DATA, LUTEntry[0]); - DACDelay; - out8(M64_DAC_DATA, LUTEntry[1]); - DACDelay; - out8(M64_DAC_DATA, LUTEntry[2]); - DACDelay; - -#else /* AVOID_CPIO */ - - outb(pATI->CPIO_DAC_WRITE, Index); - DACDelay; - outb(pATI->CPIO_DAC_DATA, LUTEntry[0]); - DACDelay; - outb(pATI->CPIO_DAC_DATA, LUTEntry[1]); - DACDelay; - outb(pATI->CPIO_DAC_DATA, LUTEntry[2]); - DACDelay; - -#endif /* AVOID_CPIO */ - - } - } - } -} diff --git a/src/atidac.h b/src/atidac.h deleted file mode 100644 index fc3b7589..00000000 --- a/src/atidac.h +++ /dev/null @@ -1,103 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atidac.h,v 1.15 2003/01/01 19:16:31 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIDAC_H___ - -#if !defined(___ATI_H___) && defined(XFree86Module) -# error missing #include "ati.h" before #include "atidac.h" -# undef XFree86Module -#endif - -#define ___ATIDAC_H___ 1 - -#include "aticrtc.h" -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -#include "colormapst.h" - -/* - * RAMDAC-related definitions. - */ -#define ATI_DAC_MAX_TYPE MaxBits(DACTYPE) -#define ATI_DAC_MAX_SUBTYPE MaxBits(BIOS_INIT_DAC_SUBTYPE) - -#define ATI_DAC(_Type, _Subtype) (((_Type) << 4) | (_Subtype)) - -#define ATI_DAC_ATI68830 ATI_DAC(0x0U, 0x0U) -#define ATI_DAC_SC11483 ATI_DAC(0x1U, 0x0U) -#define ATI_DAC_ATI68875 ATI_DAC(0x2U, 0x0U) -#define ATI_DAC_TVP3026_A ATI_DAC(0x2U, 0x7U) -#define ATI_DAC_GENERIC ATI_DAC(0x3U, 0x0U) -#define ATI_DAC_BT481 ATI_DAC(0x4U, 0x0U) -#define ATI_DAC_ATT20C491 ATI_DAC(0x4U, 0x1U) -#define ATI_DAC_SC15026 ATI_DAC(0x4U, 0x2U) -#define ATI_DAC_MU9C1880 ATI_DAC(0x4U, 0x3U) -#define ATI_DAC_IMSG174 ATI_DAC(0x4U, 0x4U) -#define ATI_DAC_ATI68860_B ATI_DAC(0x5U, 0x0U) -#define ATI_DAC_ATI68860_C ATI_DAC(0x5U, 0x1U) -#define ATI_DAC_TVP3026_B ATI_DAC(0x5U, 0x7U) -#define ATI_DAC_STG1700 ATI_DAC(0x6U, 0x0U) -#define ATI_DAC_ATT20C498 ATI_DAC(0x6U, 0x1U) -#define ATI_DAC_STG1702 ATI_DAC(0x7U, 0x0U) -#define ATI_DAC_SC15021 ATI_DAC(0x7U, 0x1U) -#define ATI_DAC_ATT21C498 ATI_DAC(0x7U, 0x2U) -#define ATI_DAC_STG1703 ATI_DAC(0x7U, 0x3U) -#define ATI_DAC_CH8398 ATI_DAC(0x7U, 0x4U) -#define ATI_DAC_ATT20C408 ATI_DAC(0x7U, 0x5U) -#define ATI_DAC_INTERNAL ATI_DAC(0x8U, 0x0U) -#define ATI_DAC_IBMRGB514 ATI_DAC(0x9U, 0x0U) -#define ATI_DAC_UNKNOWN ATI_DAC((ATI_DAC_MAX_TYPE << 2) + 3, \ - ATI_DAC_MAX_SUBTYPE) -extern const SymTabRec ATIDACDescriptors[]; - -#ifdef AVOID_CPIO - -# define DACDelay /* Nothing */ - -#else /* AVOID_CPIO */ - -# define DACDelay \ - do \ - { \ - (void)inb(pATI->CPIO_DAC_WAIT); \ - (void)inb(pATI->CPIO_DAC_WAIT); \ - } while (0) - - extern void ATISetDACIOPorts FunctionPrototype((ATIPtr, ATICRTCType)); - -#endif /* AVOID_CPIO */ - -extern CARD8 ATIGetDACCmdReg FunctionPrototype((ATIPtr)); - -extern void ATIDACPreInit FunctionPrototype((ScrnInfoPtr, ATIPtr, - ATIHWPtr)); -extern void ATIDACSave FunctionPrototype((ATIPtr, ATIHWPtr)); -extern void ATIDACSet FunctionPrototype((ATIPtr, ATIHWPtr)); - -extern void ATILoadPalette FunctionPrototype((ScrnInfoPtr, int, int *, - LOCO *, VisualPtr)); - -#endif /* ___ATIDAC_H___ */ diff --git a/src/atidecoder.c b/src/atidecoder.c deleted file mode 100644 index aee37416..00000000 --- a/src/atidecoder.c +++ /dev/null @@ -1,47 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atidecoder.c,v 1.1 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "atidecoder.h" - -/* - * Video decoder definitions. - */ -const char *ATIDecoderNames[] = -{ - "No decoder", - "BrookTree BT819", - "Brooktree BT829", - "Brooktree BT829A", - "Philips SA7111", - "Philips SA7112", - "ATI Rage Theater", - "Unknown type (7)", - "Unknown type (8)", - "Unknown type (9)", - "Unknown type (10)", - "Unknown type (11)", - "Unknown type (12)", - "Unknown type (13)", - "Unknown type (14)", - "Unknown type (15)" -}; diff --git a/src/atidecoder.h b/src/atidecoder.h deleted file mode 100644 index e88b89f7..00000000 --- a/src/atidecoder.h +++ /dev/null @@ -1,52 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atidecoder.h,v 1.1 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIDECODER_H___ -#define ___ATIDECODER_H___ 1 - -/* - * Video decoder definitions. - */ -typedef enum -{ - ATI_DECODER_NONE, - ATI_DECODER_BT819, - ATI_DECODER_BT829, - ATI_DECODER_BT829A, - ATI_DECODER_SA7111, - ATI_DECODER_SA7112, - ATI_DECODER_THEATER, - ATI_DECODER_7, - ATI_DECODER_8, - ATI_DECODER_9, - ATI_DECODER_10, - ATI_DECODER_11, - ATI_DECODER_12, - ATI_DECODER_13, - ATI_DECODER_14, - ATI_DECODER_15 -} ATIDecoderType; - -extern const char *ATIDecoderNames[]; - -#endif /* ___ATIDECODER_H___ */ diff --git a/src/atidga.c b/src/atidga.c deleted file mode 100644 index 9273f03a..00000000 --- a/src/atidga.c +++ /dev/null @@ -1,479 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atidga.c,v 1.10 2003/04/23 21:51:27 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef AVOID_DGA - -#include "ati.h" -#include "atiadjust.h" -#include "atichip.h" -#include "atidac.h" -#include "atidga.h" -#include "atiident.h" -#include "atimode.h" -#include "atistruct.h" - -#include "dgaproc.h" - -/* - * ATIDGAOpenFramebuffer -- - * - * This function returns various framebuffer attributes to a DGA client. - */ -static Bool -ATIDGAOpenFramebuffer -( - ScrnInfoPtr pScreenInfo, - char **DeviceName, - unsigned char **ApertureBase, - int *ApertureSize, - int *ApertureOffset, - int *flags -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - *DeviceName = NULL; /* No special device */ - *ApertureBase = (unsigned char *)(pATI->LinearBase); - *ApertureSize = pScreenInfo->videoRam * 1024; - *ApertureOffset = 0; /* Always */ - *flags = 0; /* Root premissions OS-dependent */ - - return TRUE; -} - -static int -BitsSet -( - unsigned long data -) -{ - unsigned long mask = 1; - int set = 0; - - for (; mask; mask <<= 1) - if (data & mask) - set++; - - return set; -} - -/* - * ATIDGASetMode -- - * - * This function sets a graphics mode for a DGA client. - */ -static Bool -ATIDGASetMode -( - ScrnInfoPtr pScreenInfo, - DGAModePtr pDGAMode -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - DisplayModePtr pMode; - int iScreen = pScreenInfo->scrnIndex; - int frameX0, frameY0; - - if (pDGAMode) - { - pMode = pDGAMode->mode; - pATI->depth = pDGAMode->depth; - pATI->bitsPerPixel = pDGAMode->bitsPerPixel; - pATI->displayWidth = - pDGAMode->bytesPerScanline * 8 / pATI->bitsPerPixel; - pATI->weight.red = BitsSet(pDGAMode->red_mask); - pATI->weight.green = BitsSet(pDGAMode->green_mask); - pATI->weight.blue = BitsSet(pDGAMode->blue_mask); - frameX0 = frameY0 = 0; - if (!pATI->currentMode) - pATI->currentMode = pScreenInfo->currentMode; - } - else - { - if (!(pMode = pATI->currentMode)) - return TRUE; - - pATI->depth = pScreenInfo->depth; - pATI->bitsPerPixel = pScreenInfo->bitsPerPixel; - pATI->displayWidth = pScreenInfo->displayWidth; - pATI->weight = pScreenInfo->weight; - frameX0 = pScreenInfo->frameX0; - frameY0 = pScreenInfo->frameY0; - } - - pATI->XModifier = pATI->bitsPerPixel / UnitOf(pATI->bitsPerPixel); - ATIAdjustPreInit(pATI); - ATIModePreInit(pScreenInfo, pATI, &pATI->NewHW); - - if (!(*pScreenInfo->SwitchMode)(iScreen, pMode, 0)) - return FALSE; - if (!pDGAMode) - pATI->currentMode = NULL; - (*pScreenInfo->AdjustFrame)(iScreen, frameX0, frameY0, 0); - - return TRUE; -} - -/* - * ATIDGASetViewport -- - * - * This function sets the display start address for a DGA client. - */ -static void -ATIDGASetViewport -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int flags -) -{ - (*pScreenInfo->AdjustFrame)(pScreenInfo->pScreen->myNum, x, y, flags); -} - -/* - * ATIDGAGetViewport -- - * - * This function returns the current status of prior DGA requests to set the - * adapter's display start address. - */ -static int -ATIDGAGetViewport -( - ScrnInfoPtr pScreenInfo -) -{ - return 0; /* There are never any pending requests */ -} - -/* - * ATIDGAFillRect -- - * - * This function calls XAA solid fill primitives to fill a rectangle. - */ -static void -ATIDGAFillRect -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int w, - int h, - unsigned long colour -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - XAAInfoRecPtr pXAAInfo = pATI->pXAAInfo; - - (*pXAAInfo->SetupForSolidFill)(pScreenInfo, (int)colour, GXcopy, - (CARD32)(~0)); - (*pXAAInfo->SubsequentSolidFillRect)(pScreenInfo, x, y, w, h); - - if (pScreenInfo->bitsPerPixel == pATI->bitsPerPixel) - SET_SYNC_FLAG(pXAAInfo); -} - -/* - * ATIDGABlitRect -- - * - * This function calls XAA screen-to-screen copy primitives to copy a - * rectangle. - */ -static void -ATIDGABlitRect -( - ScrnInfoPtr pScreenInfo, - int xSrc, - int ySrc, - int w, - int h, - int xDst, - int yDst -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - XAAInfoRecPtr pXAAInfo = pATI->pXAAInfo; - int xdir = ((xSrc < xDst) && (ySrc == yDst)) ? -1 : 1; - int ydir = (ySrc < yDst) ? -1 : 1; - - (*pXAAInfo->SetupForScreenToScreenCopy)(pScreenInfo, - xdir, ydir, GXcopy, (CARD32)(~0), -1); - (*pXAAInfo->SubsequentScreenToScreenCopy)(pScreenInfo, - xSrc, ySrc, xDst, yDst, w, h); - - if (pScreenInfo->bitsPerPixel == pATI->bitsPerPixel) - SET_SYNC_FLAG(pXAAInfo); -} - -/* - * ATIDGABlitTransRect -- - * - * This function calls XAA screen-to-screen copy primitives to transparently - * copy a rectangle. - */ -static void -ATIDGABlitTransRect -( - ScrnInfoPtr pScreenInfo, - int xSrc, - int ySrc, - int w, - int h, - int xDst, - int yDst, - unsigned long colour -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - XAAInfoRecPtr pXAAInfo = pATI->pXAAInfo; - int xdir = ((xSrc < xDst) && (ySrc == yDst)) ? -1 : 1; - int ydir = (ySrc < yDst) ? -1 : 1; - - pATI->XAAForceTransBlit = TRUE; - - (*pXAAInfo->SetupForScreenToScreenCopy)(pScreenInfo, - xdir, ydir, GXcopy, (CARD32)(~0), (int)colour); - - pATI->XAAForceTransBlit = FALSE; - - (*pXAAInfo->SubsequentScreenToScreenCopy)(pScreenInfo, - xSrc, ySrc, xDst, yDst, w, h); - - if (pScreenInfo->bitsPerPixel == pATI->bitsPerPixel) - SET_SYNC_FLAG(pXAAInfo); -} - -/* - * ATIDGAAddModes -- - * - * This function translates DisplayModeRec's into DGAModeRec's. - */ -static void -ATIDGAAddModes -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - int flags, - int depth, - int bitsPerPixel, - int redMask, - int greenMask, - int blueMask, - int visualClass -) -{ - DisplayModePtr pMode = pScreenInfo->modes; - DGAModePtr pDGAMode; - int displayWidth = pScreenInfo->displayWidth; - int videoBits = pScreenInfo->videoRam * 1024 * 8; - int xViewportStep = 64 / UnitOf(bitsPerPixel); - int modePitch, bitsPerScanline, maxViewportY; - - if (bitsPerPixel != pScreenInfo->bitsPerPixel) - displayWidth = 0; - - while (1) - { - /* Weed out multiscanned modes */ - if ((pMode->VScan <= 1) || - ((pMode->VScan == 2) && !(pMode->Flags & V_DBLSCAN))) - { - /* - * For code simplicity, ensure DGA mode pitch is a multiple of 64 - * bytes. - */ - if (!(modePitch = displayWidth)) - { - modePitch = ((64 * 8) / UnitOf(bitsPerPixel)) - 1; - modePitch = (pMode->HDisplay + modePitch) & ~modePitch; - } - - /* Ensure the mode fits in video memory */ - if ((modePitch * bitsPerPixel * pMode->VDisplay) <= videoBits) - { - /* Stop generating modes on out-of-memory conditions */ - pDGAMode = xrealloc(pATI->pDGAMode, - (pATI->nDGAMode + 1) * SizeOf(DGAModeRec)); - if (!pDGAMode) - break; - - pATI->pDGAMode = pDGAMode; - pDGAMode += pATI->nDGAMode; - pATI->nDGAMode++; - (void)memset(pDGAMode, 0, SizeOf(DGAModeRec)); - - /* Fill in the mode structure */ - pDGAMode->mode = pMode; - pDGAMode->flags = flags; - if (bitsPerPixel == pScreenInfo->bitsPerPixel) - { - pDGAMode->flags |= DGA_PIXMAP_AVAILABLE; - pDGAMode->address = pATI->pMemory; - - if (pATI->pXAAInfo) - pDGAMode->flags &= ~DGA_CONCURRENT_ACCESS; - } - if ((pMode->Flags & V_DBLSCAN) || (pMode->VScan > 1)) - pDGAMode->flags |= DGA_DOUBLESCAN; - if (pMode->Flags & V_INTERLACE) - pDGAMode->flags |= DGA_INTERLACED; - - pDGAMode->byteOrder = pScreenInfo->imageByteOrder; - pDGAMode->depth = depth; - pDGAMode->bitsPerPixel = bitsPerPixel; - pDGAMode->red_mask = redMask; - pDGAMode->green_mask = greenMask; - pDGAMode->blue_mask = blueMask; - pDGAMode->visualClass = visualClass; - - pDGAMode->viewportWidth = pMode->HDisplay; - pDGAMode->viewportHeight = pMode->VDisplay; - pDGAMode->xViewportStep = xViewportStep; - pDGAMode->yViewportStep = 1; - - bitsPerScanline = modePitch * bitsPerPixel; - pDGAMode->bytesPerScanline = bitsPerScanline / 8; - pDGAMode->imageWidth = pDGAMode->pixmapWidth = modePitch; - pDGAMode->imageHeight = pDGAMode->pixmapHeight = - videoBits / bitsPerScanline; - - pDGAMode->maxViewportX = - pDGAMode->imageWidth - pDGAMode->viewportWidth; - pDGAMode->maxViewportY = - pDGAMode->imageHeight - pDGAMode->viewportHeight; - maxViewportY = - ((((pATI->AdjustMaxBase * 8) / bitsPerPixel) + - xViewportStep) / modePitch) - 1; - if (maxViewportY < pDGAMode->maxViewportY) - pDGAMode->maxViewportY = maxViewportY; - } - } - - if ((pMode = pMode->next) == pScreenInfo->modes) - { - if (!displayWidth) - break; - - displayWidth = 0; - } - } -} - -/* - * ATIDGAInit -- - * - * This function initialises the driver's support for the DGA extension. - */ -Bool -ATIDGAInit -( - ScreenPtr pScreen, - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - XAAInfoRecPtr pXAAInfo; - int flags; - - if (!pATI->nDGAMode) - { - -#ifndef AVOID_CPIO - - /* - * Contrary to previous extension versions, DGA 2 does not support - * banked framebuffers. Also, disable DGA when non-DGA server modes - * are planar. - */ - if (pATI->BankInfo.BankSize || (pScreenInfo->depth <= 4)) - return FALSE; - -#endif /* AVOID_CPIO */ - - /* Set up DGA callbacks */ - pATI->ATIDGAFunctions.OpenFramebuffer = ATIDGAOpenFramebuffer; - pATI->ATIDGAFunctions.SetMode = ATIDGASetMode; - pATI->ATIDGAFunctions.SetViewport = ATIDGASetViewport; - pATI->ATIDGAFunctions.GetViewport = ATIDGAGetViewport; - - flags = 0; - if ((pXAAInfo = pATI->pXAAInfo)) - { - pATI->ATIDGAFunctions.Sync = pXAAInfo->Sync; - if (pXAAInfo->SetupForSolidFill && - pXAAInfo->SubsequentSolidFillRect) - { - flags |= DGA_FILL_RECT; - pATI->ATIDGAFunctions.FillRect = ATIDGAFillRect; - } - if (pXAAInfo->SetupForScreenToScreenCopy && - pXAAInfo->SubsequentScreenToScreenCopy) - { - flags |= DGA_BLIT_RECT | DGA_BLIT_RECT_TRANS; - pATI->ATIDGAFunctions.BlitRect = ATIDGABlitRect; - pATI->ATIDGAFunctions.BlitTransRect = ATIDGABlitTransRect; - } - } - if (!flags) - flags = DGA_CONCURRENT_ACCESS; - - ATIDGAAddModes(pScreenInfo, pATI, flags, - 8, 8, 0, 0, 0, PseudoColor); - - if ((pATI->Chip >= ATI_CHIP_264CT) && - (pATI->Chipset == ATI_CHIPSET_ATI)) - { - ATIDGAAddModes(pScreenInfo, pATI, flags, - 15, 16, 0x7C00U, 0x03E0U, 0x001FU, TrueColor); - - ATIDGAAddModes(pScreenInfo, pATI, flags, - 16, 16, 0xF800U, 0x07E0U, 0x001FU, TrueColor); - - ATIDGAAddModes(pScreenInfo, pATI, flags, - 24, 24, 0x00FF0000U, 0x0000FF00U, 0x000000FFU, TrueColor); - - ATIDGAAddModes(pScreenInfo, pATI, flags, - 24, 32, 0x00FF0000U, 0x0000FF00U, 0x000000FFU, TrueColor); - - if (pATI->DAC != ATI_DAC_INTERNAL) /* Not first revision */ - { - ATIDGAAddModes(pScreenInfo, pATI, flags, - 15, 16, 0x7C00U, 0x03E0U, 0x001FU, DirectColor); - - ATIDGAAddModes(pScreenInfo, pATI, flags, - 16, 16, 0xF800U, 0x07E0U, 0x001FU, DirectColor); - - ATIDGAAddModes(pScreenInfo, pATI, flags, - 24, 24, 0x00FF0000U, 0x0000FF00U, 0x000000FFU, DirectColor); - - ATIDGAAddModes(pScreenInfo, pATI, flags, - 24, 32, 0x00FF0000U, 0x0000FF00U, 0x000000FFU, DirectColor); - } - } - } - - return DGAInit(pScreen, &pATI->ATIDGAFunctions, pATI->pDGAMode, - pATI->nDGAMode); -} - -#endif /* AVOID_DGA */ diff --git a/src/atidga.h b/src/atidga.h deleted file mode 100644 index 96664d99..00000000 --- a/src/atidga.h +++ /dev/null @@ -1,38 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atidga.h,v 1.7 2003/04/23 21:51:28 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIDGA_H___ -#define ___ATIDGA_H___ 1 - -#ifndef AVOID_DGA - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -extern Bool ATIDGAInit FunctionPrototype((ScreenPtr, ScrnInfoPtr, ATIPtr)); - -#endif /* AVOID_DGA */ - -#endif /* ___ATIDGA_H___ */ diff --git a/src/atidri.c b/src/atidri.c deleted file mode 100644 index d5e1c898..00000000 --- a/src/atidri.c +++ /dev/null @@ -1,1508 +0,0 @@ -/* $XFree86$ */ /* -*- mode: c; c-basic-offset: 3 -*- */ -/* - * Copyright 2000 Gareth Hughes - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * GARETH HUGHES BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Gareth Hughes <gareth@valinux.com> - * Leif Delgass <ldelgass@retinalburn.net> - */ - -/* Driver data structures */ -#include "ati.h" -#include "atibus.h" -#include "atidri.h" -#include "atiregs.h" -#include "atistruct.h" -#include "ativersion.h" - -#include "atimach64io.h" -#include "mach64_dri.h" -#include "mach64_common.h" -#include "mach64_sarea.h" - -/* X and server generic header files */ -#include "xf86.h" -#include "windowstr.h" - -/* GLX/DRI/DRM definitions */ -#define _XF86DRI_SERVER_ -#include "GL/glxtokens.h" -#include "sarea.h" - -static char ATIKernelDriverName[] = "mach64"; -static char ATIClientDriverName[] = "mach64"; - -/* Initialize the visual configs that are supported by the hardware. - * These are combined with the visual configs that the indirect - * rendering core supports, and the intersection is exported to the - * client. - */ -static Bool ATIInitVisualConfigs( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - int numConfigs = 0; - __GLXvisualConfig *pConfigs = NULL; - ATIConfigPrivPtr pATIConfigs = NULL; - ATIConfigPrivPtr *pATIConfigPtrs = NULL; - int i, accum, stencil, db; - - switch ( pATI->bitsPerPixel ) { - case 8: /* 8bpp mode is not support */ - case 15: /* FIXME */ - case 24: /* FIXME */ - xf86DrvMsg(pScreen->myNum, X_ERROR, - "[dri] ATIInitVisualConfigs failed (%d bpp not supported). " - "Disabling DRI.\n", pATI->bitsPerPixel); - return FALSE; - -#define ATI_USE_ACCUM 1 -#define ATI_USE_STENCIL 1 - - case 16: - - if ( pATI->depth != 16) { - xf86DrvMsg(pScreen->myNum, X_ERROR, - "[dri] ATIInitVisualConfigs failed (depth %d at 16 bpp not supported). " - "Disabling DRI.\n", pATI->depth); - return FALSE; - } - - numConfigs = 1; - if ( ATI_USE_ACCUM ) numConfigs *= 2; - if ( ATI_USE_STENCIL ) numConfigs *= 2; - numConfigs *= 2; /* single- and double-buffered */ - - pConfigs = (__GLXvisualConfig*) - xnfcalloc( sizeof(__GLXvisualConfig), numConfigs ); - if ( !pConfigs ) { - return FALSE; - } - pATIConfigs = (ATIConfigPrivPtr) - xnfcalloc( sizeof(ATIConfigPrivRec), numConfigs ); - if ( !pATIConfigs ) { - xfree( pConfigs ); - return FALSE; - } - pATIConfigPtrs = (ATIConfigPrivPtr*) - xnfcalloc( sizeof(ATIConfigPrivPtr), numConfigs ); - if ( !pATIConfigPtrs ) { - xfree( pConfigs ); - xfree( pATIConfigs ); - return FALSE; - } - - i = 0; - for (db = 0; db <= 1; db++) { - for ( accum = 0 ; accum <= ATI_USE_ACCUM ; accum++ ) { - for ( stencil = 0 ; stencil <= ATI_USE_STENCIL ; stencil++ ) { - pATIConfigPtrs[i] = &pATIConfigs[i]; - - pConfigs[i].vid = -1; - pConfigs[i].class = -1; - pConfigs[i].rgba = TRUE; - pConfigs[i].redSize = 5; - pConfigs[i].greenSize = 6; - pConfigs[i].blueSize = 5; - pConfigs[i].alphaSize = 0; - pConfigs[i].redMask = 0x0000F800; - pConfigs[i].greenMask = 0x000007E0; - pConfigs[i].blueMask = 0x0000001F; - pConfigs[i].alphaMask = 0x00000000; - if ( accum ) { /* Simulated in software */ - pConfigs[i].accumRedSize = 16; - pConfigs[i].accumGreenSize = 16; - pConfigs[i].accumBlueSize = 16; - pConfigs[i].accumAlphaSize = 0; - } else { - pConfigs[i].accumRedSize = 0; - pConfigs[i].accumGreenSize = 0; - pConfigs[i].accumBlueSize = 0; - pConfigs[i].accumAlphaSize = 0; - } - pConfigs[i].doubleBuffer = db ? TRUE : FALSE; - pConfigs[i].stereo = FALSE; - pConfigs[i].bufferSize = 16; - pConfigs[i].depthSize = 16; - if ( stencil ) { /* Simulated in software */ - pConfigs[i].stencilSize = 8; - } else { - pConfigs[i].stencilSize = 0; - } - pConfigs[i].auxBuffers = 0; - pConfigs[i].level = 0; - if ( accum || stencil ) { - pConfigs[i].visualRating = GLX_SLOW_CONFIG; - } else { - pConfigs[i].visualRating = GLX_NONE; - } - pConfigs[i].transparentPixel = GLX_NONE; - pConfigs[i].transparentRed = 0; - pConfigs[i].transparentGreen = 0; - pConfigs[i].transparentBlue = 0; - pConfigs[i].transparentAlpha = 0; - pConfigs[i].transparentIndex = 0; - i++; - } - } - } - break; - - case 32: - numConfigs = 1; - if ( ATI_USE_ACCUM ) numConfigs *= 2; - if ( ATI_USE_STENCIL ) numConfigs *= 2; - numConfigs *= 2; /* single- and double-buffered */ - - pConfigs = (__GLXvisualConfig*) - xnfcalloc( sizeof(__GLXvisualConfig), numConfigs ); - if ( !pConfigs ) { - return FALSE; - } - pATIConfigs = (ATIConfigPrivPtr) - xnfcalloc( sizeof(ATIConfigPrivRec), numConfigs ); - if ( !pATIConfigs ) { - xfree( pConfigs ); - return FALSE; - } - pATIConfigPtrs = (ATIConfigPrivPtr*) - xnfcalloc( sizeof(ATIConfigPrivPtr), numConfigs ); - if ( !pATIConfigPtrs ) { - xfree( pConfigs ); - xfree( pATIConfigs ); - return FALSE; - } - - i = 0; - for (db = 0; db <= 1; db++) { - for ( accum = 0 ; accum <= ATI_USE_ACCUM ; accum++ ) { - for ( stencil = 0 ; stencil <= ATI_USE_STENCIL ; stencil++ ) { - pATIConfigPtrs[i] = &pATIConfigs[i]; - - pConfigs[i].vid = -1; - pConfigs[i].class = -1; - pConfigs[i].rgba = TRUE; - pConfigs[i].redSize = 8; - pConfigs[i].greenSize = 8; - pConfigs[i].blueSize = 8; - pConfigs[i].alphaSize = 0; - pConfigs[i].redMask = 0x00FF0000; - pConfigs[i].greenMask = 0x0000FF00; - pConfigs[i].blueMask = 0x000000FF; - pConfigs[i].alphaMask = 0x00000000; - if ( accum ) { /* Simulated in software */ - pConfigs[i].accumRedSize = 16; - pConfigs[i].accumGreenSize = 16; - pConfigs[i].accumBlueSize = 16; - pConfigs[i].accumAlphaSize = 0; - } else { - pConfigs[i].accumRedSize = 0; - pConfigs[i].accumGreenSize = 0; - pConfigs[i].accumBlueSize = 0; - pConfigs[i].accumAlphaSize = 0; - } - pConfigs[i].doubleBuffer = db ? TRUE : FALSE; - pConfigs[i].stereo = FALSE; - pConfigs[i].bufferSize = 24; - if ( stencil ) { /* Simulated in software */ - pConfigs[i].depthSize = 16; - pConfigs[i].stencilSize = 8; - } else { - pConfigs[i].depthSize = 16; - pConfigs[i].stencilSize = 0; - } - pConfigs[i].auxBuffers = 0; - pConfigs[i].level = 0; - if ( accum || stencil ) { - pConfigs[i].visualRating = GLX_SLOW_CONFIG; - } else { - pConfigs[i].visualRating = GLX_NONE; - } - pConfigs[i].transparentPixel = GLX_NONE; - pConfigs[i].transparentRed = 0; - pConfigs[i].transparentGreen = 0; - pConfigs[i].transparentBlue = 0; - pConfigs[i].transparentAlpha = 0; - pConfigs[i].transparentIndex = 0; - i++; - } - } - } - break; - } - - pATI->numVisualConfigs = numConfigs; - pATI->pVisualConfigs = pConfigs; - pATI->pVisualConfigsPriv = pATIConfigs; - GlxSetVisualConfigs( numConfigs, pConfigs, (void**)pATIConfigPtrs ); - return TRUE; -} - -/* Create the ATI-specific context information */ -static Bool ATICreateContext( ScreenPtr pScreen, VisualPtr visual, - drm_context_t hwContext, void *pVisualConfigPriv, - DRIContextType contextStore ) -{ - /* Nothing yet */ - return TRUE; -} - -/* Destroy the ATI-specific context information */ -static void ATIDestroyContext( ScreenPtr pScreen, drm_context_t hwContext, - DRIContextType contextStore ) -{ - /* Nothing yet */ -} - -/* Called when the X server is woken up to allow the last client's - * context to be saved and the X server's context to be loaded. - * The client detects when it's context is not currently loaded and - * then loads it itself. The X server's context is loaded in the - * XAA Sync callback if NeedDRISync is set. - */ -static void ATIEnterServer( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - - if ( pATI->directRenderingEnabled && pATI->pXAAInfo ) { - pATI->pXAAInfo->NeedToSync = TRUE; - pATI->NeedDRISync = TRUE; - } -} - -/* Called when the X server goes to sleep to allow the X server's - * context to be saved and the last client's context to be loaded. - * The client detects when it's context is not currently loaded and - * then loads it itself. The X server keeps track of it's own state. - */ -static void ATILeaveServer( ScreenPtr pScreen ) -{ - /* Nothing yet */ -} - -/* Contexts can be swapped by the X server if necessary. This callback - * is currently only used to perform any functions necessary when - * entering or leaving the X server, and in the future might not be - * necessary. - */ -static void ATIDRISwapContext( ScreenPtr pScreen, - DRISyncType syncType, - DRIContextType oldContextType, - void *oldContext, - DRIContextType newContextType, - void *newContext ) -{ - if ( ( syncType == DRI_3D_SYNC ) && ( oldContextType == DRI_2D_CONTEXT ) && - ( newContextType == DRI_2D_CONTEXT ) ) { - /* Entering from Wakeup */ - ATIEnterServer( pScreen ); - } - if ( ( syncType == DRI_2D_SYNC ) && ( oldContextType == DRI_NO_CONTEXT ) && - ( newContextType == DRI_2D_CONTEXT ) ) { - /* Exiting from Block Handler */ - ATILeaveServer( pScreen ); - } -} - -static void ATIDRITransitionTo2d(ScreenPtr pScreen) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - - if (pATI->backArea) { - xf86FreeOffscreenArea(pATI->backArea); - pATI->backArea = NULL; - } - if (pATI->depthTexArea) { - xf86FreeOffscreenArea(pATI->depthTexArea); - pATI->depthTexArea = NULL; - } - pATI->have3DWindows = FALSE; -} - -static void ATIDRITransitionTo3d(ScreenPtr pScreen) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - FBAreaPtr fbArea; - int width, height; - - xf86PurgeUnlockedOffscreenAreas(pScreen); - - xf86QueryLargestOffscreenArea(pScreen, &width, &height, 0, 0, 0); - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Largest offscreen area available: %d x %d\n", - width, height); - - fbArea = xf86AllocateOffscreenArea(pScreen, pScreenInfo->displayWidth, - height - pATI->depthTexLines - - pATI->backLines, - pScreenInfo->displayWidth, NULL, NULL, NULL); - - if (!fbArea) - xf86DrvMsg(pScreen->myNum, X_ERROR, "Unable to reserve placeholder " - "offscreen area, you might experience screen corruption\n"); - - if (!pATI->backArea) { - pATI->backArea = - xf86AllocateOffscreenArea(pScreen, pScreenInfo->displayWidth, - pATI->backLines, - pScreenInfo->displayWidth, - NULL, NULL, NULL); - } - if (!pATI->backArea) - xf86DrvMsg(pScreen->myNum, X_ERROR, "Unable to reserve offscreen area " - "for back buffer, you might experience screen corruption\n"); - - if (!pATI->depthTexArea) { - pATI->depthTexArea = - xf86AllocateOffscreenArea(pScreen, pScreenInfo->displayWidth, - pATI->depthTexLines, - pScreenInfo->displayWidth, - NULL, NULL, NULL); - } - if (!pATI->depthTexArea) - xf86DrvMsg(pScreen->myNum, X_ERROR, "Unable to reserve offscreen area " - "for depth buffer and textures, you might experience screen corruption\n"); - - if (fbArea) - xf86FreeOffscreenArea(fbArea); - - pATI->have3DWindows = TRUE; -} - -/* Initialize the state of the back and depth buffers. */ -static void ATIDRIInitBuffers( WindowPtr pWin, RegionPtr prgn, CARD32 indx ) -{ - ScreenPtr pScreen = pWin->drawable.pScreen; - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - ATIDRIServerInfoPtr pATIDRIServer = pATI->pDRIServerInfo; - XAAInfoRecPtr pXAAInfo = pATI->pXAAInfo; - BoxPtr pbox, pboxSave; - int nbox, nboxSave; - int depth; - - depth = 0x0000ffff; - - if (!pXAAInfo) - return; - - if (!pXAAInfo->SetupForSolidFill) - return; - - /* FIXME: Only initialize the back and depth buffers for contexts - that request them */ - - /* FIXME: Use drm clear? (see Radeon driver) */ - - pboxSave = pbox = REGION_RECTS(prgn); - nboxSave = nbox = REGION_NUM_RECTS(prgn); - - (*pXAAInfo->SetupForSolidFill)(pScreenInfo, 0, GXcopy, (CARD32)(-1)); - for (; nbox; nbox--, pbox++) { - (*pXAAInfo->SubsequentSolidFillRect)(pScreenInfo, - pbox->x1 + pATIDRIServer->fbX, - pbox->y1 + pATIDRIServer->fbY, - pbox->x2 - pbox->x1, - pbox->y2 - pbox->y1); - (*pXAAInfo->SubsequentSolidFillRect)(pScreenInfo, - pbox->x1 + pATIDRIServer->backX, - pbox->y1 + pATIDRIServer->backY, - pbox->x2 - pbox->x1, - pbox->y2 - pbox->y1); - } - - pbox = pboxSave; - nbox = nboxSave; - - (*pXAAInfo->SetupForSolidFill)(pScreenInfo, depth, GXcopy, (CARD32)(-1)); - for (; nbox; nbox--, pbox++) - (*pXAAInfo->SubsequentSolidFillRect)(pScreenInfo, - pbox->x1 + pATIDRIServer->depthX, - pbox->y1 + pATIDRIServer->depthY, - pbox->x2 - pbox->x1, - pbox->y2 - pbox->y1); - - pXAAInfo->NeedToSync = TRUE; -} - -/* Copy the back and depth buffers when the X server moves a window. - * - * Note: this function was copied from the Radeon driver... - * - * This routine is a modified form of XAADoBitBlt with the calls to - * ScreenToScreenBitBlt built in. My routine has the prgnSrc as source - * instead of destination. My origin is upside down so the ydir cases - * are reversed. - */ -static void ATIDRIMoveBuffers( WindowPtr pWin, DDXPointRec ptOldOrg, - RegionPtr prgnSrc, CARD32 indx ) -{ - ScreenPtr pScreen = pWin->drawable.pScreen; - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - XAAInfoRecPtr pXAAInfo = pATI->pXAAInfo; - - int backOffsetPitch = (((pATI->pDRIServerInfo->backPitch/8) << 22) | - (pATI->pDRIServerInfo->backOffset >> 3)); -#if 0 - int depthOffsetPitch = (((pATI->pDRIServerInfo->depthPitch/8) << 22) | - (pATI->pDRIServerInfo->depthOffset >> 3)); -#endif - BoxPtr pboxTmp, pboxNext, pboxBase; - DDXPointPtr pptTmp; - int xdir, ydir; - - int screenwidth = pScreenInfo->virtualX; - int screenheight = pScreenInfo->virtualY; - - BoxPtr pbox = REGION_RECTS(prgnSrc); - int nbox = REGION_NUM_RECTS(prgnSrc); - - BoxPtr pboxNew1 = NULL; - BoxPtr pboxNew2 = NULL; - DDXPointPtr pptNew1 = NULL; - DDXPointPtr pptNew2 = NULL; - DDXPointPtr pptSrc = &ptOldOrg; - - int dx = pWin->drawable.x - ptOldOrg.x; - int dy = pWin->drawable.y - ptOldOrg.y; - - if (!pXAAInfo) - return; - - if (!pXAAInfo->SetupForScreenToScreenCopy) - return; - - /* FIXME: Only move the back and depth buffers for contexts - * that request them. - */ - - /* If the copy will overlap in Y, reverse the order */ - if (dy > 0) { - ydir = -1; - - if (nbox > 1) { - /* Keep ordering in each band, reverse order of bands */ - pboxNew1 = (BoxPtr)ALLOCATE_LOCAL(sizeof(BoxRec)*nbox); - if (!pboxNew1) return; - pptNew1 = (DDXPointPtr)ALLOCATE_LOCAL(sizeof(DDXPointRec)*nbox); - if (!pptNew1) { - DEALLOCATE_LOCAL(pboxNew1); - return; - } - pboxBase = pboxNext = pbox+nbox-1; - while (pboxBase >= pbox) { - while ((pboxNext >= pbox) && (pboxBase->y1 == pboxNext->y1)) - pboxNext--; - pboxTmp = pboxNext+1; - pptTmp = pptSrc + (pboxTmp - pbox); - while (pboxTmp <= pboxBase) { - *pboxNew1++ = *pboxTmp++; - *pptNew1++ = *pptTmp++; - } - pboxBase = pboxNext; - } - pboxNew1 -= nbox; - pbox = pboxNew1; - pptNew1 -= nbox; - pptSrc = pptNew1; - } - } else { - /* No changes required */ - ydir = 1; - } - - /* If the regions will overlap in X, reverse the order */ - if (dx > 0) { - xdir = -1; - - if (nbox > 1) { - /* reverse order of rects in each band */ - pboxNew2 = (BoxPtr)ALLOCATE_LOCAL(sizeof(BoxRec)*nbox); - pptNew2 = (DDXPointPtr)ALLOCATE_LOCAL(sizeof(DDXPointRec)*nbox); - if (!pboxNew2 || !pptNew2) { - DEALLOCATE_LOCAL(pptNew2); - DEALLOCATE_LOCAL(pboxNew2); - DEALLOCATE_LOCAL(pptNew1); - DEALLOCATE_LOCAL(pboxNew1); - return; - } - pboxBase = pboxNext = pbox; - while (pboxBase < pbox+nbox) { - while ((pboxNext < pbox+nbox) - && (pboxNext->y1 == pboxBase->y1)) - pboxNext++; - pboxTmp = pboxNext; - pptTmp = pptSrc + (pboxTmp - pbox); - while (pboxTmp != pboxBase) { - *pboxNew2++ = *--pboxTmp; - *pptNew2++ = *--pptTmp; - } - pboxBase = pboxNext; - } - pboxNew2 -= nbox; - pbox = pboxNew2; - pptNew2 -= nbox; - pptSrc = pptNew2; - } - } else { - /* No changes are needed */ - xdir = 1; - } - - (*pXAAInfo->SetupForScreenToScreenCopy)(pScreenInfo, xdir, ydir, GXcopy, - (CARD32)(-1), -1); - - for (; nbox-- ; pbox++) { - int xa = pbox->x1; - int ya = pbox->y1; - int destx = xa + dx; - int desty = ya + dy; - int w = pbox->x2 - xa + 1; - int h = pbox->y2 - ya + 1; - - if (destx < 0) xa -= destx, w += destx, destx = 0; - if (desty < 0) ya -= desty, h += desty, desty = 0; - if (destx + w > screenwidth) w = screenwidth - destx; - if (desty + h > screenheight) h = screenheight - desty; - - if (w <= 0) continue; - if (h <= 0) continue; - - ATIMach64WaitForFIFO(pATI, 2); - outf(SRC_OFF_PITCH, backOffsetPitch); - outf(DST_OFF_PITCH, backOffsetPitch); - - (*pXAAInfo->SubsequentScreenToScreenCopy)(pScreenInfo, - xa, ya, - destx, desty, - w, h); -#if 0 - /* FIXME: Move depth buffers? */ - ATIMach64WaitForFIFO(pATI, 2); - outf(SRC_OFF_PITCH, depthOffsetPitch); - outf(DST_OFF_PITCH, depthOffsetPitch); - - if (pATI->depthMoves) - ATIScreenToScreenCopyDepth(pScreenInfo, - xa, ya, - destx, desty, - w, h); -#endif - } - - ATIMach64WaitForFIFO(pATI, 2); - outf(SRC_OFF_PITCH, pATI->NewHW.dst_off_pitch); - outf(DST_OFF_PITCH, pATI->NewHW.src_off_pitch); - - DEALLOCATE_LOCAL(pptNew2); - DEALLOCATE_LOCAL(pboxNew2); - DEALLOCATE_LOCAL(pptNew1); - DEALLOCATE_LOCAL(pboxNew1); - - pXAAInfo->NeedToSync = TRUE; -} - -/* Compute log base 2 of val. */ -static int Mach64MinBits(int val) -{ - int bits; - - if (!val) return 1; - for (bits = 0; val; val >>= 1, ++bits); - return bits; -} - -/* Initialize the AGP state. Request memory for use in AGP space, and - * initialize the Rage Pro registers to point to that memory. - */ -static Bool ATIDRIAgpInit( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - ATIDRIServerInfoPtr pATIDRIServer = pATI->pDRIServerInfo; - - unsigned long mode; - unsigned int vendor, device; - int ret; - unsigned long cntl; - int s, l; - - pATIDRIServer->agpSize = ATI_DEFAULT_AGP_SIZE; - pATIDRIServer->agpMode = ATI_DEFAULT_AGP_MODE; - pATIDRIServer->bufferSize = ATI_DEFAULT_BUFFER_SIZE; - pATIDRIServer->ringSize = 16; /* 16 kB ring */ - - if ( drmAgpAcquire( pATI->drmFD ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_WARNING, "[agp] AGP not available\n" ); - return FALSE; - } - - mode = drmAgpGetMode( pATI->drmFD ); /* Default mode */ - vendor = drmAgpVendorId( pATI->drmFD ); - device = drmAgpDeviceId( pATI->drmFD ); - - if (pATI->OptionAGPMode > 0 && pATI->OptionAGPMode <= ATI_AGP_MAX_MODE) { - pATIDRIServer->agpMode = pATI->OptionAGPMode; - xf86DrvMsg( pScreen->myNum, X_CONFIG, "[agp] Using AGP %dx Mode\n", - pATIDRIServer->agpMode ); - } else if (pATI->OptionAGPMode > 0) { - xf86DrvMsg( pScreen->myNum, X_ERROR, "[agp] Illegal AGP Mode: %d\n", - pATI->OptionAGPMode ); - return FALSE; - } else { - /* If no mode configured, use the default mode obtained from agpgart */ - if ( mode & AGP_MODE_2X ) { - pATIDRIServer->agpMode = 2; - } else if ( mode & AGP_MODE_1X ) { - pATIDRIServer->agpMode = 1; - } - xf86DrvMsg( pScreen->myNum, X_DEFAULT, "[agp] Using AGP %dx Mode\n", - pATIDRIServer->agpMode ); - } - - mode &= ~AGP_MODE_MASK; - switch ( pATIDRIServer->agpMode ) { - case 2: mode |= AGP_MODE_2X; - case 1: default: mode |= AGP_MODE_1X; - } - - if (pATI->OptionAGPSize) { - switch (pATI->OptionAGPSize) { - case 256: - case 128: - case 64: - case 32: - case 16: - case 8: - case 4: - pATIDRIServer->agpSize = pATI->OptionAGPSize; - xf86DrvMsg( pScreen->myNum, X_CONFIG, "[agp] Using %d MB AGP aperture\n", - pATIDRIServer->agpSize ); - break; - default: - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[agp] Illegal aperture size %d MB\n", pATI->OptionAGPSize ); - return FALSE; - } - } else { - xf86DrvMsg( pScreen->myNum, X_DEFAULT, "[agp] Using %d MB AGP aperture\n", - pATIDRIServer->agpSize ); - } - - xf86DrvMsg( pScreen->myNum, X_INFO, - "[agp] Mode 0x%08lx [AGP 0x%04x/0x%04x; Card 0x%04x/0x%04x]\n", - mode, vendor, device, - pATI->PCIInfo->vendor, - pATI->PCIInfo->chipType ); - - if ( drmAgpEnable( pATI->drmFD, mode ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, "[agp] AGP not enabled\n" ); - drmAgpRelease( pATI->drmFD ); - return FALSE; - } - - pATIDRIServer->agpOffset = 0; - - ret = drmAgpAlloc( pATI->drmFD, pATIDRIServer->agpSize*1024*1024, - 0, NULL, &pATIDRIServer->agpHandle ); - if ( ret < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, "[agp] Out of memory (%d)\n", ret ); - drmAgpRelease( pATI->drmFD ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[agp] %d kB allocated with handle 0x%08x\n", - pATIDRIServer->agpSize*1024, pATIDRIServer->agpHandle ); - - if ( drmAgpBind( pATI->drmFD, pATIDRIServer->agpHandle, pATIDRIServer->agpOffset) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, "[agp] Could not bind\n" ); - drmAgpFree( pATI->drmFD, pATIDRIServer->agpHandle ); - drmAgpRelease( pATI->drmFD ); - return FALSE; - } - - xf86DrvMsg(pScreen->myNum, X_INFO, - "[agp] Using %d kB for DMA descriptor ring\n", pATIDRIServer->ringSize); - - if (pATI->OptionBufferSize) { - if (pATI->OptionBufferSize < 1 || pATI->OptionBufferSize > pATIDRIServer->agpSize ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, "[agp] Illegal DMA buffers size: %d MB\n", - pATI->OptionBufferSize ); - return FALSE; - } - if (pATI->OptionBufferSize > 2) { - xf86DrvMsg( pScreen->myNum, X_WARNING, "[agp] Illegal DMA buffers size: %d MB\n", - pATI->OptionBufferSize ); - xf86DrvMsg( pScreen->myNum, X_WARNING, "[agp] Clamping DMA buffers size to 2 MB\n", - pATI->OptionBufferSize ); - pATIDRIServer->bufferSize = 2; - } else { - pATIDRIServer->bufferSize = pATI->OptionBufferSize; - xf86DrvMsg( pScreen->myNum, X_CONFIG, "[agp] Using %d MB for DMA buffers\n", - pATIDRIServer->bufferSize ); - } - } else { - xf86DrvMsg( pScreen->myNum, X_DEFAULT, "[agp] Using %d MB for DMA buffers\n", - pATIDRIServer->bufferSize ); - } - - pATIDRIServer->agpTexSize = pATIDRIServer->agpSize - pATIDRIServer->bufferSize; - - /* Reserve space for the DMA descriptor ring */ - pATIDRIServer->ringStart = pATIDRIServer->agpOffset; - pATIDRIServer->ringMapSize = pATIDRIServer->ringSize*1024; /* ringSize is in kB */ - - /* Reserve space for the vertex buffer */ - pATIDRIServer->bufferStart = pATIDRIServer->ringStart + pATIDRIServer->ringMapSize; - pATIDRIServer->bufferMapSize = pATIDRIServer->bufferSize*1024*1024; - - /* Reserve the rest for AGP textures */ - pATIDRIServer->agpTexStart = pATIDRIServer->bufferStart + pATIDRIServer->bufferMapSize; - s = (pATIDRIServer->agpSize*1024*1024 - pATIDRIServer->agpTexStart); - l = Mach64MinBits((s-1) / MACH64_NR_TEX_REGIONS); - if (l < MACH64_LOG_TEX_GRANULARITY) l = MACH64_LOG_TEX_GRANULARITY; - pATIDRIServer->agpTexMapSize = (s >> l) << l; - pATIDRIServer->log2AGPTexGran = l; - - xf86DrvMsg(pScreen->myNum, X_INFO, - "[agp] Using %d kB for AGP textures\n", pATIDRIServer->agpTexMapSize/1024); - - /* Map DMA descriptor ring */ - if ( drmAddMap( pATI->drmFD, pATIDRIServer->ringStart, pATIDRIServer->ringMapSize, - DRM_AGP, DRM_RESTRICTED, &pATIDRIServer->ringHandle ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[agp] Could not add ring mapping\n" ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[agp] ring handle = 0x%08lx\n", - pATIDRIServer->ringHandle ); - - if ( drmMap( pATI->drmFD, pATIDRIServer->ringHandle, - pATIDRIServer->ringMapSize, &pATIDRIServer->ringMap ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[agp] Could not map ring\n" ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[agp] Ring mapped at 0x%08lx\n", - (unsigned long)pATIDRIServer->ringMap ); - - /* Map vertex buffers */ - if ( drmAddMap( pATI->drmFD, pATIDRIServer->bufferStart, pATIDRIServer->bufferMapSize, - DRM_AGP, 0, &pATIDRIServer->bufferHandle ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[agp] Could not add vertex buffers mapping\n" ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[agp] vertex buffers handle = 0x%08lx\n", - pATIDRIServer->bufferHandle ); - - if ( drmMap( pATI->drmFD, pATIDRIServer->bufferHandle, - pATIDRIServer->bufferMapSize, &pATIDRIServer->bufferMap ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[agp] Could not map vertex buffers\n" ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[agp] Vertex buffers mapped at 0x%08lx\n", - (unsigned long)pATIDRIServer->bufferMap ); - - /* Map AGP Textures */ - if (drmAddMap(pATI->drmFD, pATIDRIServer->agpTexStart, pATIDRIServer->agpTexMapSize, - DRM_AGP, 0, &pATIDRIServer->agpTexHandle) < 0) { - xf86DrvMsg(pScreen->myNum, X_ERROR, - "[agp] Could not add AGP texture region mapping\n"); - return FALSE; - } - xf86DrvMsg(pScreen->myNum, X_INFO, - "[agp] AGP texture region handle = 0x%08lx\n", - pATIDRIServer->agpTexHandle); - - if (drmMap(pATI->drmFD, pATIDRIServer->agpTexHandle, pATIDRIServer->agpTexMapSize, - &pATIDRIServer->agpTexMap) < 0) { - xf86DrvMsg(pScreen->myNum, X_ERROR, - "[agp] Could not map AGP texture region\n"); - return FALSE; - } - xf86DrvMsg(pScreen->myNum, X_INFO, - "[agp] AGP Texture region mapped at 0x%08lx\n", - (unsigned long)pATIDRIServer->agpTexMap); - - /* Initialize Mach64's AGP registers */ - cntl = inm( AGP_CNTL ); - cntl &= ~AGP_APER_SIZE_MASK; - switch ( pATIDRIServer->agpSize ) { - case 256: cntl |= AGP_APER_SIZE_256MB; break; - case 128: cntl |= AGP_APER_SIZE_128MB; break; - case 64: cntl |= AGP_APER_SIZE_64MB; break; - case 32: cntl |= AGP_APER_SIZE_32MB; break; - case 16: cntl |= AGP_APER_SIZE_16MB; break; - case 8: cntl |= AGP_APER_SIZE_8MB; break; - case 4: cntl |= AGP_APER_SIZE_4MB; break; - default: - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[agp] Illegal aperture size %d kB\n", - pATIDRIServer->agpSize*1024 ); - return FALSE; - } - - /* 1 = DATA comes in clock in which TRDY sampled (default) */ - /* 0 = DATA comes in clock after TRDY sampled */ - cntl |= AGP_TRDY_MODE; - - /* 1 = generate all reads as high priority */ - /* 0 = generate all reads as their default priority (default) */ - /* Setting this only works for me at AGP 1x mode (LLD) */ - if (pATIDRIServer->agpMode == 1) { - cntl |= HIGH_PRIORITY_READ_EN; - } else { - cntl &= ~HIGH_PRIORITY_READ_EN; - } - - outm( AGP_BASE, drmAgpBase(pATI->drmFD) ); - outm( AGP_CNTL, cntl ); - - return TRUE; -} - -/* Add a map for the MMIO registers that will be accessed by any - * DRI-based clients. - */ -static Bool ATIDRIMapInit( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - ATIDRIServerInfoPtr pATIDRIServer = pATI->pDRIServerInfo; - - pATIDRIServer->regsSize = getpagesize(); - if ( drmAddMap( pATI->drmFD, pATI->Block1Base, - pATIDRIServer->regsSize, - DRM_REGISTERS, DRM_READ_ONLY, - &pATIDRIServer->regsHandle ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[drm] failed to map registers\n" ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[drm] register handle = 0x%08lx\n", - pATIDRIServer->regsHandle ); - - return TRUE; -} - -/* Initialize the kernel data structures. */ -static Bool ATIDRIKernelInit( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - ATIDRIServerInfoPtr pATIDRIServer = pATI->pDRIServerInfo; - drmMach64Init info; - - memset( &info, 0, sizeof(drmMach64Init) ); - - info.func = DRM_MACH64_INIT_DMA; - info.sarea_priv_offset = sizeof(XF86DRISAREARec); - info.is_pci = pATIDRIServer->IsPCI; - info.dma_mode = pATI->OptionDMAMode; - - info.fb_bpp = pATI->bitsPerPixel; - info.front_offset = pATIDRIServer->frontOffset; - info.front_pitch = pATIDRIServer->frontPitch; - info.back_offset = pATIDRIServer->backOffset; - info.back_pitch = pATIDRIServer->backPitch; - - info.depth_bpp = 16; - info.depth_offset = pATIDRIServer->depthOffset; - info.depth_pitch = pATIDRIServer->depthPitch; - - info.fb_offset = pATI->LinearBase; - info.mmio_offset = pATIDRIServer->regsHandle; - info.ring_offset = pATIDRIServer->ringHandle; - info.buffers_offset = pATIDRIServer->bufferHandle; - info.agp_textures_offset = pATIDRIServer->agpTexHandle; - - if ( drmCommandWrite( pATI->drmFD, DRM_MACH64_INIT, - &info, sizeof(drmMach64Init) ) < 0 ) { - return FALSE; - } else { - return TRUE; - } -} - -/* Add a map for the DMA buffers that will be accessed by any - * DRI-based clients. - */ -static Bool ATIDRIAddBuffers( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - ATIDRIServerInfoPtr pATIDRIServer = pATI->pDRIServerInfo; - - /* Initialize vertex buffers */ - if ( pATIDRIServer->IsPCI ) { - pATIDRIServer->numBuffers = drmAddBufs( pATI->drmFD, - (pATIDRIServer->bufferSize*1024*1024)/MACH64_BUFFER_SIZE, - MACH64_BUFFER_SIZE, - 0, - 0 ); - } else { - pATIDRIServer->numBuffers = drmAddBufs( pATI->drmFD, - pATIDRIServer->bufferMapSize/MACH64_BUFFER_SIZE, - MACH64_BUFFER_SIZE, - DRM_AGP_BUFFER, - pATIDRIServer->bufferStart ); - } - if ( pATIDRIServer->numBuffers <= 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[drm] Could not create DMA buffers list\n" ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[drm] Added %d %d byte DMA buffers\n", - pATIDRIServer->numBuffers, MACH64_BUFFER_SIZE ); - - return TRUE; -} - -static Bool ATIDRIMapBuffers( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - ATIDRIServerInfoPtr pATIDRIServer = pATI->pDRIServerInfo; - - pATIDRIServer->drmBuffers = drmMapBufs( pATI->drmFD ); - if ( !pATIDRIServer->drmBuffers ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[drm] Failed to map DMA buffers list\n" ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[drm] Mapped %d DMA buffers at 0x%08lx\n", - pATIDRIServer->drmBuffers->count, - pATIDRIServer->drmBuffers->list->address ); - - return TRUE; -} - -static Bool ATIDRIIrqInit( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - - if ( pATI->irq <= 0 ) { - pATI->irq = drmGetInterruptFromBusID(pATI->drmFD, - ((pciConfigPtr)pATI->PCIInfo - ->thisCard)->busnum, - ((pciConfigPtr)pATI->PCIInfo - ->thisCard)->devnum, - ((pciConfigPtr)pATI->PCIInfo - ->thisCard)->funcnum); - if ( pATI->irq <= 0 ) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "[drm] Couldn't find IRQ for bus id %d:%d:%d\n", - ((pciConfigPtr)pATI->PCIInfo->thisCard)->busnum, - ((pciConfigPtr)pATI->PCIInfo->thisCard)->devnum, - ((pciConfigPtr)pATI->PCIInfo->thisCard)->funcnum); - pATI->irq = 0; - } else if ((drmCtlInstHandler(pATI->drmFD, pATI->irq)) != 0) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "[drm] Failed to initialize interrupt handler with IRQ %d\n", - pATI->irq); - pATI->irq = 0; - } - - if (pATI->irq) - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "[drm] Installed interrupt handler, using IRQ %d\n", - pATI->irq); - else { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "[drm] Falling back to irq-free operation\n", - pATI->irq); - return FALSE; - } - } - - return TRUE; - -} - -/* Initialize the screen-specific data structures for the DRI and the - * Rage Pro. This is the main entry point to the device-specific - * initialization code. It calls device-independent DRI functions to - * create the DRI data structures and initialize the DRI state. - */ -Bool ATIDRIScreenInit( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - DRIInfoPtr pDRIInfo; - ATIDRIPtr pATIDRI; - ATIDRIServerInfoPtr pATIDRIServer; - drmVersionPtr version; - int major, minor, patch; - - /* Check that the GLX, DRI, and DRM modules have been loaded by testing - * for known symbols in each module. - */ - if ( !xf86LoaderCheckSymbol("GlxSetVisualConfigs") ) return FALSE; - if ( !xf86LoaderCheckSymbol("DRIScreenInit") ) return FALSE; - if ( !xf86LoaderCheckSymbol("drmAvailable") ) return FALSE; - if ( !xf86LoaderCheckSymbol("DRIQueryVersion") ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[dri] ATIDRIScreenInit failed (libdri.a too old)\n" ); - return FALSE; - } - - /* Check the DRI version */ - DRIQueryVersion( &major, &minor, &patch ); - if ( major != 4 || minor < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[dri] ATIDRIScreenInit failed because of a version mismatch.\n" - "[dri] libDRI version is %d.%d.%d but version 4.0.x is needed.\n" - "[dri] Disabling the DRI.\n", - major, minor, patch ); - return FALSE; - } - - switch ( pATI->bitsPerPixel ) { - case 8: - /* These modes are not supported (yet). */ - case 15: - case 24: - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[dri] Direct rendering only supported in 16 and 32 bpp modes\n"); - return FALSE; - - /* Only 16 and 32 color depths are supported currently. */ - case 16: - if ( pATI->depth != 16) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[dri] Direct rendering not supported for depth %d at fbbpp 16.\n", pATI->depth ); - return FALSE; - } - break; - case 32: - break; - } - - /* Create the DRI data structure, and fill it in before calling the - * DRIScreenInit(). - */ - pDRIInfo = DRICreateInfoRec(); - if ( !pDRIInfo ) return FALSE; - - pATI->pDRIInfo = pDRIInfo; - pDRIInfo->drmDriverName = ATIKernelDriverName; - pDRIInfo->clientDriverName = ATIClientDriverName; - if (xf86LoaderCheckSymbol("DRICreatePCIBusID")) { - pDRIInfo->busIdString = DRICreatePCIBusID(pATI->PCIInfo); - } else { - pDRIInfo->busIdString = xalloc( 64 ); - sprintf( pDRIInfo->busIdString, - "PCI:%d:%d:%d", - pATI->PCIInfo->bus, - pATI->PCIInfo->device, - pATI->PCIInfo->func ); - } - pDRIInfo->ddxDriverMajorVersion = ATI_VERSION_MAJOR; - pDRIInfo->ddxDriverMinorVersion = ATI_VERSION_MINOR; - pDRIInfo->ddxDriverPatchVersion = ATI_VERSION_PATCH; - pDRIInfo->frameBufferPhysicalAddress = pATI->LinearBase; - pDRIInfo->frameBufferSize = pATI->LinearSize; - pDRIInfo->frameBufferStride = (pScreenInfo->displayWidth * - pATI->FBBytesPerPixel); - pDRIInfo->ddxDrawableTableEntry = ATI_MAX_DRAWABLES; - - if ( SAREA_MAX_DRAWABLES < ATI_MAX_DRAWABLES ) { - pDRIInfo->maxDrawableTableEntry = SAREA_MAX_DRAWABLES; - } else { - pDRIInfo->maxDrawableTableEntry = ATI_MAX_DRAWABLES; - } - - /* For now the mapping works by using a fixed size defined - * in the SAREA header - */ - if ( sizeof(XF86DRISAREARec) + sizeof(ATISAREAPrivRec) > SAREA_MAX ) { - ErrorF( "[dri] Data does not fit in SAREA\n" ); - return FALSE; - } - xf86DrvMsg( pScreenInfo->scrnIndex, X_INFO, "[drm] SAREA %d+%d: %d\n", - sizeof(XF86DRISAREARec), sizeof(ATISAREAPrivRec), - sizeof(XF86DRISAREARec) + sizeof(ATISAREAPrivRec) ); - pDRIInfo->SAREASize = SAREA_MAX; - - pATIDRI = (ATIDRIPtr) xnfcalloc( sizeof(ATIDRIRec), 1 ); - if ( !pATIDRI ) { - DRIDestroyInfoRec( pATI->pDRIInfo ); - pATI->pDRIInfo = NULL; - xf86DrvMsg( pScreenInfo->scrnIndex, X_ERROR, - "[dri] Failed to allocate memory for private record\n" ); - return FALSE; - } - pATIDRIServer = (ATIDRIServerInfoPtr) - xnfcalloc( sizeof(ATIDRIServerInfoRec), 1 ); - if ( !pATIDRIServer ) { - xfree( pATIDRI ); - DRIDestroyInfoRec( pATI->pDRIInfo ); - pATI->pDRIInfo = NULL; - xf86DrvMsg( pScreenInfo->scrnIndex, X_ERROR, - "[dri] Failed to allocate memory for private record\n" ); - return FALSE; - } - - pATI->pDRIServerInfo = pATIDRIServer; - - pDRIInfo->devPrivate = pATIDRI; - pDRIInfo->devPrivateSize = sizeof(ATIDRIRec); - pDRIInfo->contextSize = sizeof(ATIDRIContextRec); - - pDRIInfo->CreateContext = ATICreateContext; - pDRIInfo->DestroyContext = ATIDestroyContext; - pDRIInfo->SwapContext = ATIDRISwapContext; - pDRIInfo->InitBuffers = ATIDRIInitBuffers; - pDRIInfo->MoveBuffers = ATIDRIMoveBuffers; - pDRIInfo->TransitionTo2d = ATIDRITransitionTo2d; - pDRIInfo->TransitionTo3d = ATIDRITransitionTo3d; - pDRIInfo->bufferRequests = DRI_ALL_WINDOWS; - - pDRIInfo->createDummyCtx = TRUE; - pDRIInfo->createDummyCtxPriv = FALSE; - - pATI->have3DWindows = FALSE; - - if ( !DRIScreenInit( pScreen, pDRIInfo, &pATI->drmFD ) ) { - xfree( pATIDRIServer ); - pATI->pDRIServerInfo = NULL; - xfree( pDRIInfo->devPrivate ); - pDRIInfo->devPrivate = NULL; - DRIDestroyInfoRec( pDRIInfo ); - pDRIInfo = NULL; - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[dri] DRIScreenInit Failed\n" ); - return FALSE; - } - - /* Check the DRM lib version. - drmGetLibVersion was not supported in version 1.0, so check for - symbol first to avoid possible crash or hang. - */ - if (xf86LoaderCheckSymbol("drmGetLibVersion")) { - version = drmGetLibVersion(pATI->drmFD); - } else { - /* drmlib version 1.0.0 didn't have the drmGetLibVersion - entry point. Fake it by allocating a version record - via drmGetVersion and changing it to version 1.0.0 - */ - version = drmGetVersion(pATI->drmFD); - version->version_major = 1; - version->version_minor = 0; - version->version_patchlevel = 0; - } - - if (version) { - if (version->version_major != 1 || - version->version_minor < 1) { - /* incompatible drm library version */ - xf86DrvMsg(pScreen->myNum, X_ERROR, - "[dri] ATIDRIScreenInit failed because of a version mismatch.\n" - "[dri] libdrm.a module version is %d.%d.%d but version 1.1.x is needed.\n" - "[dri] Disabling DRI.\n", - version->version_major, - version->version_minor, - version->version_patchlevel); - drmFreeVersion(version); - ATIDRICloseScreen(pScreen); - return FALSE; - } - drmFreeVersion(version); - } - - /* Check the mach64 DRM version */ - version = drmGetVersion( pATI->drmFD ); - if ( version ) { - if ( version->version_major != 1 || - version->version_minor < 0 ) { - /* Incompatible DRM version */ - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[dri] ATIDRIScreenInit failed because of a version mismatch.\n" - "[dri] mach64.o kernel module version is %d.%d.%d, but version 1.0 or greater is needed.\n" - "[dri] Disabling DRI.\n", - version->version_major, - version->version_minor, - version->version_patchlevel ); - drmFreeVersion( version ); - ATIDRICloseScreen( pScreen ); - return FALSE; - } - drmFreeVersion( version ); - } - - switch ( pATI->OptionDMAMode ) { - case MACH64_MODE_DMA_ASYNC: - xf86DrvMsg(pScreen->myNum, X_INFO, "[drm] Will request asynchronous DMA mode\n"); - break; - case MACH64_MODE_DMA_SYNC: - xf86DrvMsg(pScreen->myNum, X_INFO, "[drm] Will request synchronous DMA mode\n"); - break; - case MACH64_MODE_MMIO: - xf86DrvMsg(pScreen->myNum, X_INFO, "[drm] Will request pseudo-DMA (MMIO) mode\n"); - break; - default: - xf86DrvMsg(pScreen->myNum, X_WARNING, "[drm] Unknown DMA mode\n"); - } - - pATIDRIServer->IsPCI = (pATI->BusType == ATI_BUS_PCI || pATI->OptionIsPCI) ? TRUE : FALSE; - - if ( pATI->BusType != ATI_BUS_PCI && pATI->OptionIsPCI ) { - outm( AGP_BASE, 0 ); - outm( AGP_CNTL, 0 ); - xf86DrvMsg(pScreen->myNum, X_CONFIG, "[dri] Forcing PCI mode\n"); - } - - /* Check buffer size option for PCI, since it won't be done in ATIDRIAgpInit */ - if ( pATIDRIServer->IsPCI) { - pATIDRIServer->bufferSize = ATI_DEFAULT_BUFFER_SIZE; - if (pATI->OptionBufferSize) { - if (pATI->OptionBufferSize < 1) { - xf86DrvMsg( pScreen->myNum, X_ERROR, "[pci] Illegal DMA buffers size: %d MB\n", - pATI->OptionBufferSize ); - ATIDRICloseScreen( pScreen ); - return FALSE; - } - if (pATI->OptionBufferSize > 2) { - xf86DrvMsg( pScreen->myNum, X_WARNING, "[pci] Illegal DMA buffers size: %d MB\n", - pATI->OptionBufferSize ); - xf86DrvMsg( pScreen->myNum, X_WARNING, "[pci] Clamping DMA buffers size to 2 MB\n", - pATI->OptionBufferSize ); - pATIDRIServer->bufferSize = 2; - } else { - pATIDRIServer->bufferSize = pATI->OptionBufferSize; - xf86DrvMsg( pScreen->myNum, X_CONFIG, "[pci] Using %d MB DMA buffer size\n", - pATIDRIServer->bufferSize ); - } - } else { - xf86DrvMsg( pScreen->myNum, X_DEFAULT, "[pci] Using %d MB DMA buffer size\n", - pATIDRIServer->bufferSize ); - } - } - - /* Initialize AGP */ - if ( !pATIDRIServer->IsPCI && !ATIDRIAgpInit( pScreen ) ) { - pATIDRIServer->IsPCI = TRUE; - if ( pATI->BusType != ATI_BUS_PCI ) { - outm( AGP_BASE, 0 ); - outm( AGP_CNTL, 0 ); - } - xf86DrvMsg( pScreen->myNum, X_WARNING, "[agp] AGP failed to initialize -- falling back to PCI mode.\n" ); - xf86DrvMsg( pScreen->myNum, X_WARNING, "[agp] Make sure you have the agpgart kernel module loaded.\n" ); - } - - if ( !ATIDRIMapInit( pScreen ) ) { - ATIDRICloseScreen( pScreen ); - return FALSE; - } - - if ( !ATIInitVisualConfigs( pScreen ) ) { - ATIDRICloseScreen( pScreen ); - return FALSE; - } - xf86DrvMsg( pScreenInfo->scrnIndex, X_INFO, - "[dri] Visual configs initialized\n" ); - - xf86DrvMsg( pScreenInfo->scrnIndex, X_INFO, - "[dri] Block 0 base at 0x%08lx\n", pATI->Block0Base ); - - return TRUE; -} - -/* Finish initializing the device-dependent DRI state, and call - * DRIFinishScreenInit() to complete the device-independent DRI - * initialization. - */ -Bool ATIDRIFinishScreenInit( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - ATISAREAPrivPtr pSAREAPriv; - ATIDRIPtr pATIDRI; - ATIDRIServerInfoPtr pATIDRIServer; - - pATI->pDRIInfo->driverSwapMethod = DRI_HIDE_X_CONTEXT; - - /* NOTE: DRIFinishScreenInit must be called before *DRIKernelInit - * because *DRIKernelInit requires that the hardware lock is held by - * the X server, and the first time the hardware lock is grabbed is - * in DRIFinishScreenInit. - */ - if ( !DRIFinishScreenInit( pScreen ) ) { - ATIDRICloseScreen( pScreen ); - return FALSE; - } - - /* Initialize the DMA buffer list */ - /* Need to do this before ATIDRIKernelInit so we can init the freelist */ - if ( !ATIDRIAddBuffers( pScreen ) ) { - ATIDRICloseScreen( pScreen ); - return FALSE; - } - - /* Initialize the kernel data structures */ - if ( !ATIDRIKernelInit( pScreen ) ) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "[drm] Failed to initialize the mach64.o kernel module\n"); - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "[drm] Check the system log for more information.\n"); - ATIDRICloseScreen( pScreen ); - return FALSE; - } - - if ( !ATIDRIMapBuffers( pScreen ) ) { - ATIDRICloseScreen( pScreen ); - return FALSE; - } - - /* Initialize IRQ */ - ATIDRIIrqInit( pScreen ); - - pSAREAPriv = (ATISAREAPrivPtr) DRIGetSAREAPrivate( pScreen ); - memset( pSAREAPriv, 0, sizeof(*pSAREAPriv) ); - - pATIDRI = (ATIDRIPtr)pATI->pDRIInfo->devPrivate; - pATIDRIServer = pATI->pDRIServerInfo; - - pATIDRI->width = pScreenInfo->virtualX; - pATIDRI->height = pScreenInfo->virtualY; - pATIDRI->mem = pScreenInfo->videoRam * 1024; - pATIDRI->cpp = pScreenInfo->bitsPerPixel / 8; - - pATIDRI->IsPCI = pATIDRIServer->IsPCI; - pATIDRI->AGPMode = pATIDRIServer->agpMode; - - pATIDRI->frontOffset = pATIDRIServer->frontOffset; - pATIDRI->frontPitch = pATIDRIServer->frontPitch; - - pATIDRI->backOffset = pATIDRIServer->backOffset; - pATIDRI->backPitch = pATIDRIServer->backPitch; - - pATIDRI->depthOffset = pATIDRIServer->depthOffset; - pATIDRI->depthPitch = pATIDRIServer->depthPitch; - - pATIDRI->textureOffset = pATIDRIServer->textureOffset; - pATIDRI->textureSize = pATIDRIServer->textureSize; - pATIDRI->logTextureGranularity = pATIDRIServer->logTextureGranularity; - - pATIDRI->regs = pATIDRIServer->regsHandle; - pATIDRI->regsSize = pATIDRIServer->regsSize; - - pATIDRI->agp = pATIDRIServer->agpTexHandle; - pATIDRI->agpSize = pATIDRIServer->agpTexMapSize; - pATIDRI->logAgpTextureGranularity = pATIDRIServer->log2AGPTexGran; - pATIDRI->agpTextureOffset = pATIDRIServer->agpTexStart; - - return TRUE; -} - -/* The screen is being closed, so clean up any state and free any - * resources used by the DRI. - */ -void ATIDRICloseScreen( ScreenPtr pScreen ) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - ATIDRIServerInfoPtr pATIDRIServer = pATI->pDRIServerInfo; - drmMach64Init info; - - /* Stop interrupt generation and handling if used */ - if ( pATI->irq > 0 ) { - if ( drmCtlUninstHandler(pATI->drmFD) != 0 ) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "[drm] Error uninstalling interrupt handler for IRQ %d\n", pATI->irq); - } else { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "[drm] Uninstalled interrupt handler for IRQ %d\n", pATI->irq); - } - pATI->irq = 0; - } - - /* De-allocate DMA buffers */ - if ( pATIDRIServer->drmBuffers ) { - drmUnmapBufs( pATIDRIServer->drmBuffers ); - pATIDRIServer->drmBuffers = NULL; - } - - /* De-allocate all kernel resources */ - memset(&info, 0, sizeof(drmMach64Init)); - info.func = DRM_MACH64_CLEANUP_DMA; - drmCommandWrite( pATI->drmFD, DRM_MACH64_INIT, - &info, sizeof(drmMach64Init) ); - - /* De-allocate all AGP resources */ - if ( pATIDRIServer->agpTexMap ) { - drmUnmap( pATIDRIServer->agpTexMap, pATIDRIServer->agpTexMapSize ); - pATIDRIServer->agpTexMap = NULL; - } - if ( pATIDRIServer->bufferMap ) { - drmUnmap( pATIDRIServer->bufferMap, pATIDRIServer->bufferMapSize ); - pATIDRIServer->bufferMap = NULL; - } - if ( pATIDRIServer->agpHandle ) { - drmAgpUnbind( pATI->drmFD, pATIDRIServer->agpHandle ); - drmAgpFree( pATI->drmFD, pATIDRIServer->agpHandle ); - pATIDRIServer->agpHandle = 0; - drmAgpRelease( pATI->drmFD ); - } - - /* De-allocate all DRI resources */ - DRICloseScreen( pScreen ); - - /* De-allocate all DRI data structures */ - if ( pATI->pDRIInfo ) { - if ( pATI->pDRIInfo->devPrivate ) { - xfree( pATI->pDRIInfo->devPrivate ); - pATI->pDRIInfo->devPrivate = NULL; - } - DRIDestroyInfoRec( pATI->pDRIInfo ); - pATI->pDRIInfo = NULL; - } - if ( pATI->pDRIServerInfo ) { - xfree( pATI->pDRIServerInfo ); - pATI->pDRIServerInfo = NULL; - } - if ( pATI->pVisualConfigs ) { - xfree( pATI->pVisualConfigs ); - pATI->pVisualConfigs = NULL; - } - if ( pATI->pVisualConfigsPriv ) { - xfree( pATI->pVisualConfigsPriv ); - pATI->pVisualConfigsPriv = NULL; - } -} diff --git a/src/atidri.h b/src/atidri.h deleted file mode 100644 index a0319a66..00000000 --- a/src/atidri.h +++ /dev/null @@ -1,47 +0,0 @@ -/* $XFree86$ */ /* -*- mode: c; c-basic-offset: 3 -*- */ -/* - * Copyright 2000 Gareth Hughes - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * GARETH HUGHES BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Gareth Hughes <gareth@valinux.com> - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifndef __ATIDRI_H__ -#define __ATIDRI_H__ 1 - -#include "atiproto.h" - -/* DRI driver defaults */ -#define ATI_DEFAULT_AGP_SIZE 8 /* MB (must be a power of 2 and > 4MB) */ -#define ATI_DEFAULT_AGP_MODE 1 -#define ATI_DEFAULT_BUFFER_SIZE 2 /* MB (must be page aligned) */ - -#define ATI_AGP_MAX_MODE 2 - -extern Bool ATIDRIScreenInit FunctionPrototype((ScreenPtr)); -extern Bool ATIDRIFinishScreenInit FunctionPrototype((ScreenPtr)); -extern void ATIDRICloseScreen FunctionPrototype((ScreenPtr)); - -#endif /* __ATIDRI_H__ */ diff --git a/src/atidripriv.h b/src/atidripriv.h deleted file mode 100644 index b16b14e4..00000000 --- a/src/atidripriv.h +++ /dev/null @@ -1,59 +0,0 @@ -/* $XFree86$ */ /* -*- mode: c; c-basic-offset: 3 -*- */ -/* - * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, - * Precision Insight, Inc., Cedar Park, Texas, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX - * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Gareth Hughes <gareth@valinux.com> - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifndef __ATIDRIPRIV_H__ -#define __ATIDRIPRIV_H__ 1 - -#include "GL/glxint.h" -#include "GL/glxtokens.h" - -#include "atiproto.h" - -#define ATI_MAX_DRAWABLES 256 - -typedef struct { - /* Nothing here yet */ - int dummy; -} ATIConfigPrivRec, *ATIConfigPrivPtr; - -typedef struct { - /* Nothing here yet */ - int dummy; -} ATIDRIContextRec, *ATIDRIContextPtr; - -extern void GlxSetVisualConfigs FunctionPrototype((int, __GLXvisualConfig *, void **)); - -#endif /* __ATIDRIPRIV_H__ */ diff --git a/src/atidsp.c b/src/atidsp.c deleted file mode 100644 index 4cc2a053..00000000 --- a/src/atidsp.c +++ /dev/null @@ -1,329 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atidsp.c,v 1.20 2003/04/23 21:51:28 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atichip.h" -#include "aticrtc.h" -#include "atidsp.h" -#include "atimach64io.h" -#include "atividmem.h" - -/* - * ATIDSPPreInit -- - * - * This function initialises global variables used to set DSP registers on a - * VT-B or later. - */ -Bool -ATIDSPPreInit -( - int iScreen, - ATIPtr pATI -) -{ - CARD32 IOValue, dsp_config, dsp_on_off, vga_dsp_config, vga_dsp_on_off; - int trp; - - /* - * VT-B's and later have additional post-dividers that are not powers of - * two. - */ - pATI->ClockDescriptor.NumD = 8; - - /* Retrieve XCLK settings */ - IOValue = ATIMach64GetPLLReg(PLL_XCLK_CNTL); - pATI->XCLKPostDivider = GetBits(IOValue, PLL_XCLK_SRC_SEL); - pATI->XCLKReferenceDivider = 1; - switch (pATI->XCLKPostDivider) - { - case 0: case 1: case 2: case 3: - break; - - case 4: - pATI->XCLKReferenceDivider = 3; - pATI->XCLKPostDivider = 0; - break; - - default: - xf86DrvMsg(iScreen, X_ERROR, - "Unsupported XCLK source: %d.\n", pATI->XCLKPostDivider); - return FALSE; - } - - pATI->XCLKPostDivider -= GetBits(IOValue, PLL_MFB_TIMES_4_2B); - pATI->XCLKFeedbackDivider = ATIMach64GetPLLReg(PLL_MCLK_FB_DIV); - - xf86DrvMsgVerb(iScreen, X_INFO, 2, - "Engine XCLK %.3f MHz; Refresh rate code %d.\n", - ATIDivide(pATI->XCLKFeedbackDivider * pATI->ReferenceNumerator, - pATI->XCLKReferenceDivider * pATI->ClockDescriptor.MaxM * - pATI->ReferenceDenominator, 1 - pATI->XCLKPostDivider, 0) / - (double)1000.0, - GetBits(pATI->LockData.mem_cntl, CTL_MEM_REFRESH_RATE_B)); - - /* Compute maximum RAS delay and friends */ - trp = GetBits(pATI->LockData.mem_cntl, CTL_MEM_TRP); - pATI->XCLKPageFaultDelay = GetBits(pATI->LockData.mem_cntl, CTL_MEM_TRCD) + - GetBits(pATI->LockData.mem_cntl, CTL_MEM_TCRD) + trp + 2; - pATI->XCLKMaxRASDelay = GetBits(pATI->LockData.mem_cntl, CTL_MEM_TRAS) + - trp + 2; - pATI->DisplayFIFODepth = 32; - - if (pATI->Chip < ATI_CHIP_264VT4) - { - pATI->XCLKPageFaultDelay += 2; - pATI->XCLKMaxRASDelay += 3; - pATI->DisplayFIFODepth = 24; - } - - switch (pATI->MemoryType) - { - case MEM_264_DRAM: - if (pATI->VideoRAM <= 1024) - { - pATI->DisplayLoopLatency = 10; - } - else - { - pATI->DisplayLoopLatency = 8; - pATI->XCLKPageFaultDelay += 2; - } - break; - - case MEM_264_EDO: - case MEM_264_PSEUDO_EDO: - if (pATI->VideoRAM <= 1024) - { - pATI->DisplayLoopLatency = 9; - } - else - { - pATI->DisplayLoopLatency = 8; - pATI->XCLKPageFaultDelay++; - } - break; - - case MEM_264_SDRAM: - if (pATI->VideoRAM <= 1024) - { - pATI->DisplayLoopLatency = 11; - } - else - { - pATI->DisplayLoopLatency = 10; - pATI->XCLKPageFaultDelay++; - } - break; - - case MEM_264_SGRAM: - pATI->DisplayLoopLatency = 8; - pATI->XCLKPageFaultDelay += 3; - break; - - default: /* Set maximums */ - pATI->DisplayLoopLatency = 11; - pATI->XCLKPageFaultDelay += 3; - break; - } - - if (pATI->XCLKMaxRASDelay <= pATI->XCLKPageFaultDelay) - pATI->XCLKMaxRASDelay = pATI->XCLKPageFaultDelay + 1; - - /* Allow BIOS to override */ - dsp_config = inr(DSP_CONFIG); - dsp_on_off = inr(DSP_ON_OFF); - vga_dsp_config = inr(VGA_DSP_CONFIG); - vga_dsp_on_off = inr(VGA_DSP_ON_OFF); - - if (dsp_config) - pATI->DisplayLoopLatency = GetBits(dsp_config, DSP_LOOP_LATENCY); - - if ((!dsp_on_off && (pATI->Chip < ATI_CHIP_264GTPRO)) || - ((dsp_on_off == vga_dsp_on_off) && - (!dsp_config || !((dsp_config ^ vga_dsp_config) & DSP_XCLKS_PER_QW)))) - { - if (ATIDivide(GetBits(vga_dsp_on_off, VGA_DSP_OFF), - GetBits(vga_dsp_config, VGA_DSP_XCLKS_PER_QW), 5, 1) > 24) - pATI->DisplayFIFODepth = 32; - else - pATI->DisplayFIFODepth = 24; - } - - return TRUE; -} - -/* - * ATIDSPSave -- - * - * This function is called to remember DSP register values on VT-B and later - * controllers. - */ -void -ATIDSPSave -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - pATIHW->dsp_on_off = inr(DSP_ON_OFF); - pATIHW->dsp_config = inr(DSP_CONFIG); -} - - -/* - * ATIDSPCalculate -- - * - * This function sets up DSP register values for a VTB or later. Note that - * this would be slightly different if VCLK 0 or 1 were used for the mode - * instead. In that case, this function would set VGA_DSP_CONFIG and - * VGA_DSP_ON_OFF, would have to zero out DSP_CONFIG and DSP_ON_OFF, and would - * have to consider that VGA_DSP_CONFIG is partitioned slightly differently - * than DSP_CONFIG. - */ -void -ATIDSPCalculate -( - ATIPtr pATI, - ATIHWPtr pATIHW, - DisplayModePtr pMode -) -{ - int Multiplier, Divider; - int RASMultiplier = pATI->XCLKMaxRASDelay, RASDivider = 1; - int dsp_precision, dsp_on, dsp_off, dsp_xclks; - int tmp, vshift, xshift; - -# define Maximum_DSP_PRECISION ((int)MaxBits(DSP_PRECISION)) - - /* Compute a memory-to-screen bandwidth ratio */ - Multiplier = pATI->XCLKFeedbackDivider * - pATI->ClockDescriptor.PostDividers[pATIHW->PostDivider]; - Divider = pATIHW->FeedbackDivider * pATI->XCLKReferenceDivider; - -#ifndef AVOID_CPIO - - if (pATI->depth >= 8) - -#endif /* AVOID_CPIO */ - - { - Divider *= pATI->bitsPerPixel / 4; - } - - /* Start by assuming a display FIFO width of 64 bits */ - vshift = (6 - 2) - pATI->XCLKPostDivider; - -#ifndef AVOID_CPIO - - if (pATIHW->crtc == ATI_CRTC_VGA) - vshift--; /* Nope, it's 32 bits wide */ - -#endif /* AVOID_CPIO */ - - if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0)) - { - /* Compensate for horizontal stretching */ - Multiplier *= pATI->LCDHorizontal; - Divider *= pMode->HDisplay & ~7; - - RASMultiplier *= pATI->LCDHorizontal; - RASDivider *= pMode->HDisplay & ~7; - } - - /* Determine dsp_precision first */ - tmp = ATIDivide(Multiplier * pATI->DisplayFIFODepth, Divider, vshift, -1); - for (dsp_precision = -5; tmp; dsp_precision++) - tmp >>= 1; - if (dsp_precision < 0) - dsp_precision = 0; - else if (dsp_precision > Maximum_DSP_PRECISION) - dsp_precision = Maximum_DSP_PRECISION; - - xshift = 6 - dsp_precision; - vshift += xshift; - - /* Move on to dsp_off */ - dsp_off = ATIDivide(Multiplier * (pATI->DisplayFIFODepth - 1), Divider, - vshift, -1) - ATIDivide(1, 1, vshift - xshift, 1); - - /* Next is dsp_on */ - -#ifndef AVOID_CPIO - - if ((pATIHW->crtc == ATI_CRTC_VGA) /* && (dsp_precision < 3) */) - { - /* - * TODO: I don't yet know why something like this appears necessary. - * But I don't have time to explore this right now. - */ - dsp_on = ATIDivide(Multiplier * 5, Divider, vshift + 2, 1); - } - else - -#endif /* AVOID_CPIO */ - - { - dsp_on = ATIDivide(Multiplier, Divider, vshift, 1); - tmp = ATIDivide(RASMultiplier, RASDivider, xshift, 1); - if (dsp_on < tmp) - dsp_on = tmp; - dsp_on += (tmp * 2) + - ATIDivide(pATI->XCLKPageFaultDelay, 1, xshift, 1); - } - - /* Calculate rounding factor and apply it to dsp_on */ - tmp = ((1 << (Maximum_DSP_PRECISION - dsp_precision)) - 1) >> 1; - dsp_on = ((dsp_on + tmp) / (tmp + 1)) * (tmp + 1); - - if (dsp_on >= ((dsp_off / (tmp + 1)) * (tmp + 1))) - { - dsp_on = dsp_off - ATIDivide(Multiplier, Divider, vshift, -1); - dsp_on = (dsp_on / (tmp + 1)) * (tmp + 1); - } - - /* Last but not least: dsp_xclks */ - dsp_xclks = ATIDivide(Multiplier, Divider, vshift + 5, 1); - - /* Build DSP register contents */ - pATIHW->dsp_on_off = SetBits(dsp_on, DSP_ON) | - SetBits(dsp_off, DSP_OFF); - pATIHW->dsp_config = SetBits(dsp_precision, DSP_PRECISION) | - SetBits(dsp_xclks, DSP_XCLKS_PER_QW) | - SetBits(pATI->DisplayLoopLatency, DSP_LOOP_LATENCY); -} - -/* - * ATIDSPSet -- - * - * This function is called to set DSP registers on VT-B and later controllers. - */ -void -ATIDSPSet -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - outr(DSP_ON_OFF, pATIHW->dsp_on_off); - outr(DSP_CONFIG, pATIHW->dsp_config); -} diff --git a/src/atidsp.h b/src/atidsp.h deleted file mode 100644 index d6881cf7..00000000 --- a/src/atidsp.h +++ /dev/null @@ -1,38 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atidsp.h,v 1.10 2003/01/01 19:16:32 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIDSP_H___ -#define ___ATIDSP_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -extern Bool ATIDSPPreInit FunctionPrototype((int, ATIPtr)); -extern void ATIDSPSave FunctionPrototype((ATIPtr, ATIHWPtr)); -extern void ATIDSPCalculate FunctionPrototype((ATIPtr, ATIHWPtr, - DisplayModePtr)); -extern void ATIDSPSet FunctionPrototype((ATIPtr, ATIHWPtr)); - -#endif /* ___ATIDSP_H___ */ diff --git a/src/atii2c.c b/src/atii2c.c deleted file mode 100644 index b884e595..00000000 --- a/src/atii2c.c +++ /dev/null @@ -1,387 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atii2c.c,v 1.2 2003/08/29 21:07:57 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "atiadapter.h" -#include "atii2c.h" -#include "atiload.h" -#include "atimach64i2c.h" -#include "atistruct.h" - -#include "xf86.h" - -/* This is derived from GATOS code, with a liberal sprinkling of bug fixes */ - -/* - * Some local macros for use by the mid-level I2C functions. - */ - -#define ATII2CDelay \ - (*pI2CBus->I2CUDelay)(pI2CBus, pI2CBus->HoldTime) - - -#define ATII2CSCLDirOff \ - if (pATII2C->SCLDir != 0) \ - (*pATII2C->I2CSetBits)(pATII2C, pATI, \ - pATII2C->I2CCur & ~pATII2C->SCLDir) - -#define ATII2CSCLDirOn \ - if (pATII2C->SCLDir != 0) \ - (*pATII2C->I2CSetBits)(pATII2C, pATI, \ - pATII2C->I2CCur | pATII2C->SCLDir) - -#define ATII2CSDADirOff \ - if (pATII2C->SDADir != 0) \ - (*pATII2C->I2CSetBits)(pATII2C, pATI, \ - pATII2C->I2CCur & ~pATII2C->SDADir) - -#define ATII2CSDADirOn \ - if (pATII2C->SDADir != 0) \ - (*pATII2C->I2CSetBits)(pATII2C, pATI, \ - pATII2C->I2CCur | pATII2C->SDADir) - - -#define ATII2CSCLBitGet \ - ((*pATII2C->I2CGetBits)(pATI) & pATII2C->SCLGet) - -#define ATII2CSCLBitOff \ - do \ - { \ - (*pATII2C->I2CSetBits)(pATII2C, pATI, \ - pATII2C->I2CCur & ~pATII2C->SCLSet); \ - ATII2CDelay; \ - } while (0) - -#define ATII2CSCLBitOn \ - do \ - { \ - (*pATII2C->I2CSetBits)(pATII2C, pATI, \ - pATII2C->I2CCur | pATII2C->SCLSet); \ - do /* Wait until all devices have released SCL */ \ - { \ - ATII2CDelay; \ - } while (ATII2CSCLBitGet == 0); \ - } while (0) - - -#define ATII2CSDABitGet \ - ((*pATII2C->I2CGetBits)(pATI) & pATII2C->SDAGet) - -#define ATII2CSDABitOff \ - do \ - { \ - (*pATII2C->I2CSetBits)(pATII2C, pATI, \ - pATII2C->I2CCur & ~pATII2C->SDASet); \ - ATII2CDelay; \ - } while (0) - -#define ATII2CSDABitOn \ - do \ - { \ - (*pATII2C->I2CSetBits)(pATII2C, pATI, \ - pATII2C->I2CCur | pATII2C->SDASet); \ - ATII2CDelay; \ - } while (0) - -#define ATII2CSDABitSet(_flag) \ - do \ - { \ - if (_flag) \ - ATII2CSDABitOn; \ - else \ - ATII2CSDABitOff; \ - } while (0) - - -/* - * ATII2CAddress -- - * - * This function puts a Start bit and an 8-bit address on the I2C bus. - */ -static Bool -ATII2CAddress -( - I2CDevPtr pI2CDev, - I2CSlaveAddr Address -) -{ - I2CBusPtr pI2CBus = pI2CDev->pI2CBus; - ATII2CPtr pATII2C = pI2CBus->DriverPrivate.ptr; - ATIPtr pATI = pATII2C->pATI; - - /* - * Set I2C line directions to out-bound. SCL will remain out-bound until - * next I2C Stop. - */ - ATII2CSCLDirOn; - ATII2CSDADirOn; - - /* - * Send Start bit. This is a pull-down of the data line while the clock - * line is pulled up. - */ - ATII2CSDABitOn; - ATII2CSCLBitOn; - ATII2CSDABitOff; - ATII2CSCLBitOff; - - /* Send low byte of device address */ - if ((*pI2CBus->I2CPutByte)(pI2CDev, (I2CByte)Address)) - { - /* Send top byte of address, if appropriate */ - if (((Address & 0x00F8U) != 0x00F0U) && - ((Address & 0x00FEU) != 0x0000U)) - return TRUE; - - if ((*pI2CBus->I2CPutByte)(pI2CDev, (I2CByte)(Address >> 8))) - return TRUE; - } - - /* Kill I2C transaction on failure */ - (*pI2CBus->I2CStop)(pI2CDev); - return FALSE; -} - -/* - * ATII2CStop -- - * - * This function puts a stop signal on the I2C bus. - */ -static void -ATII2CStop -( - I2CDevPtr pI2CDev -) -{ - I2CBusPtr pI2CBus = pI2CDev->pI2CBus; - ATII2CPtr pATII2C = pI2CBus->DriverPrivate.ptr; - ATIPtr pATI = pATII2C->pATI; - - ATII2CSDADirOn; /* Set data line direction to out-bound */ - - /* - * Send Stop bit. This is a pull-up of the data line while the clock line - * is pulled up. - */ - ATII2CSDABitOff; - ATII2CSCLBitOn; - ATII2CSDABitOn; - ATII2CSCLBitOff; - - /* Reset I2C line directions to in-bound */ - ATII2CSCLDirOff; - ATII2CSDADirOff; -} - -/* - * ATII2CPutByte -- - * - * This function puts an 8-bit value on the I2C bus, starting with its MSB. - */ -static Bool -ATII2CPutByte -( - I2CDevPtr pI2CDev, - I2CByte Data -) -{ - I2CBusPtr pI2CBus = pI2CDev->pI2CBus; - ATII2CPtr pATII2C = pI2CBus->DriverPrivate.ptr; - ATIPtr pATI = pATII2C->pATI; - int i; - Bool Result; - - ATII2CSDADirOn; /* Set data line direction to out-bound */ - - /* Send data byte */ - for (i = 0; i < 8; i++) - { - ATII2CSDABitSet(Data & 0x80U); - ATII2CSCLBitOn; - ATII2CSCLBitOff; - - Data <<= 1; - } - - ATII2CSDABitOn; /* Release data line */ - - ATII2CSDADirOff; /* Set data line direction to in-bound */ - - ATII2CSCLBitOn; /* Start bit-read clock pulse */ - - /* Get [N]ACK bit */ - if (ATII2CSDABitGet) - Result = FALSE; - else - Result = TRUE; - - ATII2CSCLBitOff; /* End clock pulse */ - - return Result; -} - -/* - * ATII2CGetByte -- - * - * This function retrieves an 8-bit value from the I2C bus. - */ -static Bool -ATII2CGetByte -( - I2CDevPtr pI2CDev, - I2CByte *pData, - Bool Last -) -{ - I2CBusPtr pI2CBus = pI2CDev->pI2CBus; - ATII2CPtr pATII2C = pI2CBus->DriverPrivate.ptr; - ATIPtr pATI = pATII2C->pATI; - unsigned long Value = 1; - - do - { - ATII2CSCLBitOn; /* Start bit-read clock pulse */ - - /* Accumulate bit into byte value */ - Value <<= 1; - if (ATII2CSDABitGet) - Value++; - - ATII2CSCLBitOff; /* End clock pulse */ - } while (Value <= (unsigned long)((I2CByte)(-1))); - - *pData = (I2CByte)Value; - - ATII2CSDADirOn; /* Set data line direction to out-bound */ - - /* Send [N]ACK bit */ - ATII2CSDABitSet(Last); - ATII2CSCLBitOn; - ATII2CSCLBitOff; - - if (!Last) - ATII2CSDABitOn; /* Release data line */ - - ATII2CSDADirOff; /* Set data line direction to in-bound */ - - return TRUE; -} - -/* - * ATICreateI2CBusRec -- - * - * This function is called to initialise an I2CBusRec. - */ -I2CBusPtr -ATICreateI2CBusRec -( - int iScreen, - ATIPtr pATI, - char *BusName -) -{ - I2CBusPtr pI2CBus; - ATII2CPtr pATII2C = xnfcalloc(1, SizeOf(ATII2CRec)); - - if (!(pI2CBus = xf86CreateI2CBusRec())) - { - xf86DrvMsg(iScreen, X_WARNING, "Unable to allocate I2C Bus record.\n"); - xfree(pATII2C); - return NULL; - } - - /* Fill in generic structure fields */ - pI2CBus->BusName = BusName; - pI2CBus->scrnIndex = iScreen; - - pI2CBus->I2CAddress = ATII2CAddress; - pI2CBus->I2CStop = ATII2CStop; - pI2CBus->I2CPutByte = ATII2CPutByte; - pI2CBus->I2CGetByte = ATII2CGetByte; - - pI2CBus->DriverPrivate.ptr = pATII2C; - - pATII2C->pATI = pATI; - - if (xf86I2CBusInit(pI2CBus)) - return pI2CBus; - - xf86DrvMsg(iScreen, X_WARNING, - "I2C bus %s initialisation failure.\n", BusName); - xf86DestroyI2CBusRec(pI2CBus, TRUE, TRUE); - xfree(pATII2C); - return NULL; -} - -/* - * ATII2CPreInit -- - * - * This is called by ATIPreInit() to create I2C bus record(s) for the adapter. - */ -void -ATII2CPreInit -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - switch (pATI->Adapter) - { - case ATI_ADAPTER_MACH64: - if (!ATILoadModule(pScreenInfo, "i2c", ATIi2cSymbols)) - return; - - ATIMach64I2CPreInit(pScreenInfo, pATI); - break; - - default: - break; - } -} - -/* - * ATII2CFreeScreen -- - * - * This is called by ATIFreeScreen() to remove the driver's I2C interface. - */ -void -ATII2CFreeScreen -( - int iScreen -) -{ - I2CBusPtr pI2CBus, *ppI2CBus; - ATII2CPtr pATII2C; - int nI2CBus; - - nI2CBus = xf86I2CGetScreenBuses(iScreen, &ppI2CBus); - while (--nI2CBus >= 0) - { - pI2CBus = ppI2CBus[nI2CBus]; - pATII2C = pI2CBus->DriverPrivate.ptr; - - xf86DestroyI2CBusRec(pI2CBus, TRUE, TRUE); - xfree(pATII2C); - } - - xfree(ppI2CBus); -} diff --git a/src/atii2c.h b/src/atii2c.h deleted file mode 100644 index ddc0d977..00000000 --- a/src/atii2c.h +++ /dev/null @@ -1,50 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atii2c.h,v 1.1 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATII2C_H___ -#define ___ATII2C_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -#include "xf86i2c.h" - -typedef struct _ATII2CRec ATII2CRec, *ATII2CPtr; - -struct _ATII2CRec -{ - ATIPtr pATI; - void (*I2CSetBits) FunctionPrototype((ATII2CPtr, ATIPtr, CARD32)); - CARD32 (*I2CGetBits) FunctionPrototype((ATIPtr)); - CARD32 SCLDir, SCLGet, SCLSet; - CARD32 SDADir, SDAGet, SDASet; - CARD32 I2CCur; -}; - -extern void ATII2CPreInit FunctionPrototype((ScrnInfoPtr, ATIPtr)); -extern I2CBusPtr ATICreateI2CBusRec FunctionPrototype((int, ATIPtr, char *)); -extern void ATII2CFreeScreen FunctionPrototype((int)); - -#endif /* ___ATII2C_H___ */ diff --git a/src/atiident.c b/src/atiident.c deleted file mode 100644 index 1fb9dbbf..00000000 --- a/src/atiident.c +++ /dev/null @@ -1,134 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiident.c,v 1.11 2003/01/01 19:16:32 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiident.h" -#include "atiutil.h" -#include "ativersion.h" - -#include "r128_probe.h" -#include "radeon_probe.h" - -const char *ATIChipsetNames[] = -{ - "ati", - -#ifndef AVOID_CPIO - - "ativga", - "ibmvga", - "ibm8514", - "vgawonder", - "mach8", - "mach32", - -#endif /* AVOID_CPIO */ - - "mach64", - "rage128", - "radeon" -}; - -static SymTabRec ATIPublicChipsetNames[] = -{ - {ATI_CHIPSET_ATI, "ati"}, - -#ifndef AVOID_CPIO - - {ATI_CHIPSET_ATIVGA, "ativga"}, -#ifdef __MAYBE_NOT__ - {ATI_CHIPSET_IBMVGA, "ibmvga"}, -#endif -#ifdef __NOT_YET__ - {ATI_CHIPSET_IBM8514, "ibm8514"}, -#endif - -#endif /* AVOID_CPIO */ - - {-1, NULL} -}; - -/* - * ATIIdentify -- - * - * Print the driver's list of chipset names. - */ -void -ATIIdentify -( - int flags -) -{ - xf86PrintChipsets(ATI_NAME, - (NumberOf(ATIPublicChipsetNames) <= 2) ? - "ATI driver (version " ATI_VERSION_NAME ") for chipset" : - "ATI driver (version " ATI_VERSION_NAME ") for chipsets", - ATIPublicChipsetNames); - R128Identify(flags); - RADEONIdentify(flags); -} - -/* - * ATIIdentProbe -- - * - * This function determines if the user specified a chipset name acceptable to - * the driver. It returns an ATIChipsetType or -1. - */ -int -ATIIdentProbe -( - const char *ChipsetName -) -{ - int Chipset; - - static SymTabRec SpecificNames[] = - { - -#ifndef AVOID_CPIO - - {ATI_CHIPSET_VGAWONDER, "vgawonder"}, -#ifdef __NOT_YET__ - {ATI_CHIPSET_MACH8, "mach8"}, -#endif - {ATI_CHIPSET_MACH32, "mach32"}, - -#endif /* AVOID_CPIO */ - - {ATI_CHIPSET_MACH64, "mach64"}, - {ATI_CHIPSET_RAGE128, "rage128"}, - {ATI_CHIPSET_RADEON, "radeon"}, - {-1, NULL} - }; - - /* If no Chipset specification, default to "ati" */ - if (!ChipsetName || !*ChipsetName) - return ATI_CHIPSET_ATI; - - Chipset = xf86StringToToken(ATIPublicChipsetNames, ChipsetName); - if (Chipset != -1) - return Chipset; - - /* Check for some other chipset names */ - return xf86StringToToken(SpecificNames, ChipsetName); -} diff --git a/src/atiident.h b/src/atiident.h deleted file mode 100644 index 74677c5c..00000000 --- a/src/atiident.h +++ /dev/null @@ -1,55 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiident.h,v 1.10 2003/01/01 19:16:32 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIIDENT_H___ -#define ___ATIIDENT_H___ 1 - -#include "atiproto.h" - -typedef enum -{ - ATI_CHIPSET_ATI, - -#ifndef AVOID_CPIO - - ATI_CHIPSET_ATIVGA, - ATI_CHIPSET_IBMVGA, - ATI_CHIPSET_IBM8514, - ATI_CHIPSET_VGAWONDER, - ATI_CHIPSET_MACH8, - ATI_CHIPSET_MACH32, - -#endif /* AVOID_CPIO */ - - ATI_CHIPSET_MACH64, - ATI_CHIPSET_RAGE128, - ATI_CHIPSET_RADEON, - ATI_CHIPSET_MAX /* Must be last */ -} ATIChipsetType; - -extern const char *ATIChipsetNames[]; - -extern void ATIIdentify FunctionPrototype((int)); -extern int ATIIdentProbe FunctionPrototype((const char *)); - -#endif /* ___ATIIDENT_H___ */ diff --git a/src/atiio.h b/src/atiio.h deleted file mode 100644 index f6f871b7..00000000 --- a/src/atiio.h +++ /dev/null @@ -1,83 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiio.h,v 1.14 2003/01/01 19:16:32 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIIO_H___ - -#if !defined(___ATI_H___) && defined(XFree86Module) -# error missing #include "ati.h" before #include "atiio.h" -# undef XFree86Module -#endif - -#define ___ATIIO_H___ 1 - -#include "atiregs.h" - -#include "compiler.h" - -/* I/O decoding definitions */ -typedef enum -{ - SPARSE_IO, - BLOCK_IO -} ATIIODecodingType; - -#ifndef AVOID_CPIO - -/* Wait until "n" queue entries are free */ -#define ibm8514WaitQueue(_n) \ - { \ - while (inw(GP_STAT) & (0x0100U >> (_n))); \ - } -#define ATIWaitQueue(_n) \ - { \ - while (inw(EXT_FIFO_STATUS) & (0x010000U >> (_n))); \ - } - -/* Wait until GP is idle and queue is empty */ -#define WaitIdleEmpty() \ - { \ - while (inw(GP_STAT) & (GPBUSY | 1)); \ - } -#define ProbeWaitIdleEmpty() \ - { \ - int _i; \ - CARD16 _value; \ - for (_i = 0; _i < 100000; _i++) \ - { \ - _value = inw(GP_STAT); \ - if (_value == (CARD16)(-1)) \ - break; \ - if (!(_value & (GPBUSY | 1))) \ - break; \ - } \ - } - -/* Wait until GP has data available */ -#define WaitDataReady() \ - { \ - while (!(inw(GP_STAT) & DATARDY)); \ - } - -#endif /* AVOID_CPIO */ - -#endif /* ___ATIIO_H___ */ diff --git a/src/atiload.c b/src/atiload.c deleted file mode 100644 index 9449205a..00000000 --- a/src/atiload.c +++ /dev/null @@ -1,244 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiload.c,v 1.15 2003/08/29 21:07:57 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifdef XFree86LOADER - -#include "ati.h" -#include "aticursor.h" -#include "atiload.h" -#include "atistruct.h" - -/* - * All symbol lists belong here. They are externalised so that they can be - * referenced elsewhere. Note the naming convention for these things... - */ - -const char *ATIint10Symbols[] = -{ - "xf86FreeInt10", - "xf86InitInt10", - "xf86int10Addr", - NULL -}; - -const char *ATIddcSymbols[] = -{ - "xf86PrintEDID", - "xf86SetDDCproperties", - NULL -}; - -const char *ATIvbeSymbols[] = -{ - "VBEInit", - "vbeDoEDID", - "vbeFree", - NULL -}; - -#ifndef AVOID_CPIO - -const char *ATIxf1bppSymbols[] = -{ - "xf1bppScreenInit", - NULL -}; - -const char *ATIxf4bppSymbols[] = -{ - "xf4bppScreenInit", - NULL -}; - -#endif /* AVOID_CPIO */ - -#ifdef XF86DRI - -const char *ATIdrmSymbols[] = { - "drmAddBufs", - "drmAddMap", - "drmAgpAcquire", - "drmAgpAlloc", - "drmAgpBase", - "drmAgpBind", - "drmAgpDeviceId", - "drmAgpEnable", - "drmAgpFree", - "drmAgpGetMode", - "drmAgpRelease", - "drmAgpUnbind", - "drmAgpVendorId", - "drmAvailable", - "drmCommandNone", - "drmCommandRead", - "drmCommandWrite", - "drmCommandWriteRead", - "drmCtlInstHandler", - "drmCtlUninstHandler", - "drmFreeVersion", - "drmGetInterruptFromBusID", - "drmGetLibVersion", - "drmGetVersion", - "drmMap", - "drmMapBufs", - "drmDMA", - "drmUnmap", - "drmUnmapBufs", - NULL -}; - -const char *ATIdriSymbols[] = { - "DRICloseScreen", - "DRICreateInfoRec", - "DRIDestroyInfoRec", - "DRIFinishScreenInit", - "DRIGetSAREAPrivate", - "DRILock", - "DRIQueryVersion", - "DRIScreenInit", - "DRIUnlock", - "GlxSetVisualConfigs", - "DRICreatePCIBusID", - NULL -}; - -#endif /* XF86DRI */ - -const char *ATIfbSymbols[] = -{ - "fbPictureInit", - "fbScreenInit", - NULL -}; - -const char *ATIshadowfbSymbols[] = -{ - "ShadowFBInit", - NULL -}; - -const char *ATIxaaSymbols[] = -{ - "XAACreateInfoRec", - "XAADestroyInfoRec", - "XAAInit", - NULL -}; - -const char *ATIramdacSymbols[] = -{ - "xf86CreateCursorInfoRec", - "xf86DestroyCursorInfoRec", - "xf86InitCursor", - NULL -}; - -const char *ATIi2cSymbols[] = -{ - "xf86CreateI2CBusRec", - "xf86DestroyI2CBusRec", - "xf86I2CBusInit", - "xf86I2CDevInit", - "xf86I2CFindDev", - "xf86I2CGetScreenBuses", - NULL -}; - -/* - * ATILoadModule -- - * - * Load a specific module and register with the loader those of its entry - * points that are referenced by this driver. - */ -pointer -ATILoadModule -( - ScrnInfoPtr pScreenInfo, - const char *Module, - const char **SymbolList -) -{ - pointer pModule = xf86LoadSubModule(pScreenInfo, Module); - - if (pModule) - xf86LoaderReqSymLists(SymbolList, NULL); - - return pModule; -} - -/* - * ATILoadModules -- - * - * This function loads other modules required for a screen. - */ -pointer -ATILoadModules -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - /* Load shadow frame buffer code if needed */ - if (pATI->OptionShadowFB && - !ATILoadModule(pScreenInfo, "shadowfb", ATIshadowfbSymbols)) - return NULL; - - /* Load XAA if needed */ - if (pATI->OptionAccel && - !ATILoadModule(pScreenInfo, "xaa", ATIxaaSymbols)) - return NULL; - - /* Load ramdac module if needed */ - if ((pATI->Cursor > ATI_CURSOR_SOFTWARE) && - !ATILoadModule(pScreenInfo, "ramdac", ATIramdacSymbols)) - return NULL; - - /* Load depth-specific entry points */ - switch (pATI->bitsPerPixel) - { - -#ifndef AVOID_CPIO - - case 1: - return ATILoadModule(pScreenInfo, "xf1bpp", ATIxf1bppSymbols); - - case 4: - return ATILoadModule(pScreenInfo, "xf4bpp", ATIxf4bppSymbols); - -#endif /* AVOID_CPIO */ - - case 8: - case 16: - case 24: - case 32: - return ATILoadModule(pScreenInfo, "fb", ATIfbSymbols); - - default: - return NULL; - } -} - -#endif /* XFree86LOADER */ diff --git a/src/atiload.h b/src/atiload.h deleted file mode 100644 index 3447825d..00000000 --- a/src/atiload.h +++ /dev/null @@ -1,65 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiload.h,v 1.6 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifndef ___ATILOAD_H___ -#define ___ATILOAD_H___ 1 - -#ifdef XFree86LOADER - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -extern const char *ATIint10Symbols[], *ATIddcSymbols[], *ATIvbeSymbols[], - -#ifndef AVOID_CPIO - - *ATIxf1bppSymbols[], *ATIxf4bppSymbols[], - -#endif /* AVOID_CPIO */ - -#ifdef XF86DRI - - *ATIdrmSymbols[], *ATIdriSymbols[], - -#endif /* XF86DRI */ - - *ATIfbSymbols[], *ATIshadowfbSymbols[], *ATIxaaSymbols[], - *ATIramdacSymbols[], *ATIi2cSymbols[]; - -extern pointer ATILoadModule FunctionPrototype((ScrnInfoPtr, const char *, - const char **)); -extern pointer ATILoadModules FunctionPrototype((ScrnInfoPtr, ATIPtr)); - -#else /* XFree86LOADER */ - -#define ATILoadModule(pScreenInfo, Module, SymboList) ((pointer)1) -#define ATILoadModules(pScreenInfo, pATI) ((pointer)1) - -#endif /* XFree86LOADER */ - -#endif /* ___ATILOAD_H___ */ diff --git a/src/atilock.c b/src/atilock.c deleted file mode 100644 index 4ba06e50..00000000 --- a/src/atilock.c +++ /dev/null @@ -1,597 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atilock.c,v 1.19 2003/04/23 21:51:28 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atichip.h" -#include "atilock.h" -#include "atimach64io.h" -#include "atiwonderio.h" - -/* - * ATIUnlock -- - * - * This function is entered to unlock registers and disable unwanted - * emulations. It saves the current state for later restoration by ATILock(). - */ -void -ATIUnlock -( - ATIPtr pATI -) -{ - CARD32 tmp; - -#ifndef AVOID_CPIO - - CARD32 saved_lcd_gen_ctrl = 0, lcd_gen_ctrl = 0; - -#endif /* AVOID_CPIO */ - - if (pATI->Unlocked) - return; - pATI->Unlocked = TRUE; - -#ifndef AVOID_CPIO - - if (pATI->ChipHasSUBSYS_CNTL) - { - /* Save register values to be modified */ - pATI->LockData.clock_sel = inw(CLOCK_SEL); - if (pATI->Chip >= ATI_CHIP_68800) - { - pATI->LockData.misc_options = inw(MISC_OPTIONS); - pATI->LockData.mem_bndry = inw(MEM_BNDRY); - pATI->LockData.mem_cfg = inw(MEM_CFG); - } - - tmp = inw(SUBSYS_STAT) & _8PLANE; - - /* Reset the 8514/A and disable all interrupts */ - outw(SUBSYS_CNTL, tmp | (GPCTRL_RESET | CHPTEST_NORMAL)); - outw(SUBSYS_CNTL, tmp | (GPCTRL_ENAB | CHPTEST_NORMAL | RVBLNKFLG | - RPICKFLAG | RINVALIDIO | RGPIDLE)); - - /* Ensure VGA is enabled */ - outw(CLOCK_SEL, pATI->LockData.clock_sel &~DISABPASSTHRU); - if (pATI->Chip >= ATI_CHIP_68800) - { - outw(MISC_OPTIONS, pATI->LockData.misc_options & - ~(DISABLE_VGA | DISABLE_DAC)); - - /* Disable any video memory boundary */ - outw(MEM_BNDRY, pATI->LockData.mem_bndry & - ~(MEM_PAGE_BNDRY | MEM_BNDRY_ENA)); - - /* Disable direct video memory aperture */ - outw(MEM_CFG, pATI->LockData.mem_cfg & - ~(MEM_APERT_SEL | MEM_APERT_PAGE | MEM_APERT_LOC)); - } - - /* Wait for all activity to die down */ - ProbeWaitIdleEmpty(); - } - else if (pATI->Chip >= ATI_CHIP_88800GXC) - -#endif /* AVOID_CPIO */ - - { - /* Reset everything */ - pATI->LockData.bus_cntl = inr(BUS_CNTL); - if (pATI->Chip < ATI_CHIP_264VT4) - { - pATI->LockData.bus_cntl = - (pATI->LockData.bus_cntl & ~BUS_HOST_ERR_INT_EN) | - BUS_HOST_ERR_INT; - if (pATI->Chip < ATI_CHIP_264VTB) - pATI->LockData.bus_cntl = - (pATI->LockData.bus_cntl & ~BUS_FIFO_ERR_INT_EN) | - BUS_FIFO_ERR_INT; - } - tmp = pATI->LockData.bus_cntl & ~BUS_ROM_DIS; - if (pATI->Chip < ATI_CHIP_264VTB) - tmp |= SetBits(15, BUS_FIFO_WS); - else - tmp &= ~BUS_MASTER_DIS; - if (pATI->Chip >= ATI_CHIP_264VT) - tmp |= BUS_EXT_REG_EN; /* Enable Block 1 */ - outr(BUS_CNTL, tmp); - pATI->LockData.crtc_int_cntl = inr(CRTC_INT_CNTL); - outr(CRTC_INT_CNTL, (pATI->LockData.crtc_int_cntl & ~CRTC_INT_ENS) | - CRTC_INT_ACKS); - -#ifdef XF86DRI - - if (pATI->irq > 0) - outr(CRTC_INT_CNTL, (inr(CRTC_INT_CNTL) & ~CRTC_INT_ACKS) | - CRTC_VBLANK_INT_EN); /* Enable VBLANK interrupt - handled by DRM */ - -#endif /* XF86DRI */ - - pATI->LockData.gen_test_cntl = inr(GEN_TEST_CNTL) & - (GEN_OVR_OUTPUT_EN | GEN_OVR_POLARITY | GEN_CUR_EN | - GEN_BLOCK_WR_EN); - tmp = pATI->LockData.gen_test_cntl & ~GEN_CUR_EN; - outr(GEN_TEST_CNTL, tmp | GEN_GUI_EN); - outr(GEN_TEST_CNTL, tmp); - outr(GEN_TEST_CNTL, tmp | GEN_GUI_EN); - tmp = pATI->LockData.crtc_gen_cntl = inr(CRTC_GEN_CNTL) & - ~(CRTC_EN | CRTC_LOCK_REGS); - if (pATI->Chip >= ATI_CHIP_264XL) - tmp = (tmp & ~CRTC_INT_ENS_X) | CRTC_INT_ACKS_X; - outr(CRTC_GEN_CNTL, tmp | CRTC_EN); - outr(CRTC_GEN_CNTL, tmp); - outr(CRTC_GEN_CNTL, tmp | CRTC_EN); - if ((pATI->LCDPanelID >= 0) && (pATI->Chip != ATI_CHIP_264LT)) - { - pATI->LockData.lcd_index = inr(LCD_INDEX); - if (pATI->Chip >= ATI_CHIP_264XL) - outr(LCD_INDEX, pATI->LockData.lcd_index & - ~(LCD_MONDET_INT_EN | LCD_MONDET_INT)); - - /* - * Prevent BIOS initiated display switches on dual-CRT controllers. - */ - if (pATI->Chip != ATI_CHIP_264XL) - { - pATI->LockData.scratch_reg3 = inr(SCRATCH_REG3); - outr(SCRATCH_REG3, - pATI->LockData.scratch_reg3 | DISPLAY_SWITCH_DISABLE); - } - } - - pATI->LockData.mem_cntl = inr(MEM_CNTL); - if (pATI->Chip < ATI_CHIP_264CT) - outr(MEM_CNTL, pATI->LockData.mem_cntl & - ~(CTL_MEM_BNDRY | CTL_MEM_BNDRY_EN)); - - /* Disable feature connector on integrated controllers */ - tmp = pATI->LockData.dac_cntl = inr(DAC_CNTL); - if (pATI->Chip >= ATI_CHIP_264CT) - tmp &= ~DAC_FEA_CON_EN; - -#ifndef AVOID_CPIO - - /* Ensure VGA aperture is enabled */ - pATI->LockData.config_cntl = inr(CONFIG_CNTL); - tmp |= DAC_VGA_ADR_EN; - outr(CONFIG_CNTL, pATI->LockData.config_cntl & ~CFG_VGA_DIS); - -#endif /* AVOID_CPIO */ - - outr(DAC_CNTL, tmp); - - if (pATI->Chip >= ATI_CHIP_264VTB) - { - pATI->LockData.mpp_config = inr(MPP_CONFIG); - pATI->LockData.mpp_strobe_seq = inr(MPP_STROBE_SEQ); - pATI->LockData.tvo_cntl = inr(TVO_CNTL); - - if (pATI->Chip >= ATI_CHIP_264GT2C) - { - pATI->LockData.hw_debug = inr(HW_DEBUG); - - if (pATI->Chip >= ATI_CHIP_264GTPRO) - { - if (!(pATI->LockData.hw_debug & CMDFIFO_SIZE_EN)) - outr(HW_DEBUG, - pATI->LockData.hw_debug | CMDFIFO_SIZE_EN); - - pATI->LockData.i2c_cntl_0 = - inr(I2C_CNTL_0) | (I2C_CNTL_STAT | I2C_CNTL_HPTR_RST); - outr(I2C_CNTL_0, - pATI->LockData.i2c_cntl_0 & ~I2C_CNTL_INT_EN); - pATI->LockData.i2c_cntl_1 = inr(I2C_CNTL_1); - } - else - { - if (pATI->LockData.hw_debug & CMDFIFO_SIZE_DIS) - outr(HW_DEBUG, - pATI->LockData.hw_debug & ~CMDFIFO_SIZE_DIS); - } - } - } - -#ifndef AVOID_CPIO - - } - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - if (pATI->CPIO_VGAWonder) - { - /* - * Ensure all registers are read/write and disable all non-VGA - * emulations. - */ - pATI->LockData.b1 = ATIGetExtReg(0xB1U); - ATIModifyExtReg(pATI, 0xB1U, pATI->LockData.b1, 0xFCU, 0x00U); - pATI->LockData.b4 = ATIGetExtReg(0xB4U); - ATIModifyExtReg(pATI, 0xB4U, pATI->LockData.b4, 0x00U, 0x00U); - pATI->LockData.b5 = ATIGetExtReg(0xB5U); - ATIModifyExtReg(pATI, 0xB5U, pATI->LockData.b5, 0xBFU, 0x00U); - pATI->LockData.b6 = ATIGetExtReg(0xB6U); - ATIModifyExtReg(pATI, 0xB6U, pATI->LockData.b6, 0xDDU, 0x00U); - pATI->LockData.b8 = ATIGetExtReg(0xB8U); - ATIModifyExtReg(pATI, 0xB8U, pATI->LockData.b8, 0xC0U, 0x00U); - pATI->LockData.b9 = ATIGetExtReg(0xB9U); - ATIModifyExtReg(pATI, 0xB9U, pATI->LockData.b9, 0x7FU, 0x00U); - if (pATI->Chip > ATI_CHIP_18800) - { - pATI->LockData.be = ATIGetExtReg(0xBEU); - ATIModifyExtReg(pATI, 0xBEU, pATI->LockData.be, 0xFAU, 0x01U); - if (pATI->Chip >= ATI_CHIP_28800_2) - { - pATI->LockData.a6 = ATIGetExtReg(0xA6U); - ATIModifyExtReg(pATI, 0xA6U, pATI->LockData.a6, - 0x7FU, 0x00U); - pATI->LockData.ab = ATIGetExtReg(0xABU); - ATIModifyExtReg(pATI, 0xABU, pATI->LockData.ab, - 0xE7U, 0x00U); - } - } - } - - if (pATI->LCDPanelID >= 0) - { - if (pATI->Chip == ATI_CHIP_264LT) - { - saved_lcd_gen_ctrl = inr(LCD_GEN_CTRL); - - /* Setup to unlock non-shadow registers */ - lcd_gen_ctrl = saved_lcd_gen_ctrl & ~SHADOW_RW_EN; - outr(LCD_GEN_CTRL, lcd_gen_ctrl); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - saved_lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - - /* Setup to unlock non-shadow registers */ - lcd_gen_ctrl = saved_lcd_gen_ctrl & - ~(CRTC_RW_SELECT | SHADOW_RW_EN); - ATIMach64PutLCDReg(LCD_GEN_CNTL, lcd_gen_ctrl); - } - } - - ATISetVGAIOBase(pATI, inb(R_GENMO)); - - /* - * There's a bizarre interaction here. If bit 0x80 of CRTC[17] is on, - * then CRTC[3] is read-only. If bit 0x80 of CRTC[3] is off, then - * CRTC[17] is write-only (or a read attempt actually returns bits from - * C/EGA's light pen position). This means that if both conditions are - * met, CRTC[17]'s value on server entry cannot be retrieved. - */ - - pATI->LockData.crt03 = tmp = GetReg(CRTX(pATI->CPIO_VGABase), 0x03U); - if ((tmp & 0x80U) || - ((outb(CRTD(pATI->CPIO_VGABase), tmp | 0x80U), - tmp = inb(CRTD(pATI->CPIO_VGABase))) & 0x80U)) - { - /* CRTC[16-17] should be readable */ - pATI->LockData.crt11 = tmp = - GetReg(CRTX(pATI->CPIO_VGABase), 0x11U); - if (tmp & 0x80U) /* Unprotect CRTC[0-7] */ - outb(CRTD(pATI->CPIO_VGABase), tmp & 0x7FU); - } - else - { - /* - * Could not make CRTC[17] readable, so unprotect CRTC[0-7] - * replacing VSyncEnd with zero. This zero will be replaced after - * acquiring the needed access. - */ - unsigned int VSyncEnd, VBlankStart, VBlankEnd; - CARD8 crt07, crt09; - - PutReg(CRTX(pATI->CPIO_VGABase), 0x11U, 0x20U); - /* Make CRTC[16-17] readable */ - PutReg(CRTX(pATI->CPIO_VGABase), 0x03U, tmp | 0x80U); - /* Make vertical synch pulse as wide as possible */ - crt07 = GetReg(CRTX(pATI->CPIO_VGABase), 0x07U); - crt09 = GetReg(CRTX(pATI->CPIO_VGABase), 0x09U); - VBlankStart = (((crt09 & 0x20U) << 4) | ((crt07 & 0x08U) << 5) | - GetReg(CRTX(pATI->CPIO_VGABase), 0x15U)) + 1; - VBlankEnd = (VBlankStart & 0x0300U) | - GetReg(CRTX(pATI->CPIO_VGABase), 0x16U); - if (VBlankEnd <= VBlankStart) - VBlankEnd += 0x0100U; - VSyncEnd = (((crt07 & 0x80U) << 2) | ((crt07 & 0x04U) << 6) | - GetReg(CRTX(pATI->CPIO_VGABase), 0x10U)) + 0x0FU; - if (VSyncEnd >= VBlankEnd) - VSyncEnd = VBlankEnd - 1; - pATI->LockData.crt11 = (VSyncEnd & 0x0FU) | 0x20U; - PutReg(CRTX(pATI->CPIO_VGABase), 0x11U, pATI->LockData.crt11); - pATI->LockData.crt11 |= 0x80U; - } - - if (pATI->LCDPanelID >= 0) - { - /* Setup to unlock shadow registers */ - lcd_gen_ctrl |= SHADOW_RW_EN; - - if (pATI->Chip == ATI_CHIP_264LT) - outr(LCD_GEN_CTRL, lcd_gen_ctrl); - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - ATIMach64PutLCDReg(LCD_GEN_CNTL, lcd_gen_ctrl); - - /* Unlock shadow registers */ - ATISetVGAIOBase(pATI, inb(R_GENMO)); - - pATI->LockData.shadow_crt03 = tmp = - GetReg(CRTX(pATI->CPIO_VGABase), 0x03U); - if ((tmp & 0x80U) || - ((outb(CRTD(pATI->CPIO_VGABase), tmp | 0x80U), - tmp = inb(CRTD(pATI->CPIO_VGABase))) & 0x80U)) - { - /* CRTC[16-17] should be readable */ - pATI->LockData.shadow_crt11 = tmp = - GetReg(CRTX(pATI->CPIO_VGABase), 0x11U); - if (tmp & 0x80U) /* Unprotect CRTC[0-7] */ - { - outb(CRTD(pATI->CPIO_VGABase), tmp & 0x7FU); - } - else if (!tmp && pATI->LockData.crt11) - { - pATI->LockData.shadow_crt11 = tmp = pATI->LockData.crt11; - outb(CRTD(pATI->CPIO_VGABase), tmp & 0x7FU); - } - } - else - { - /* - * Could not make CRTC[17] readable, so unprotect CRTC[0-7] - * replacing VSyncEnd with zero. This zero will be replaced - * after acquiring the needed access. - */ - unsigned int VSyncEnd, VBlankStart, VBlankEnd; - CARD8 crt07, crt09; - - PutReg(CRTX(pATI->CPIO_VGABase), 0x11U, 0x20U); - /* Make CRTC[16-17] readable */ - PutReg(CRTX(pATI->CPIO_VGABase), 0x03U, tmp | 0x80U); - /* Make vertical synch pulse as wide as possible */ - crt07 = GetReg(CRTX(pATI->CPIO_VGABase), 0x07U); - crt09 = GetReg(CRTX(pATI->CPIO_VGABase), 0x09U); - VBlankStart = (((crt09 & 0x20U) << 4) | - ((crt07 & 0x08U) << 5) | - GetReg(CRTX(pATI->CPIO_VGABase), 0x15U)) + 1; - VBlankEnd = (VBlankStart & 0x0300U) | - GetReg(CRTX(pATI->CPIO_VGABase), 0x16U); - if (VBlankEnd <= VBlankStart) - VBlankEnd += 0x0100U; - VSyncEnd = (((crt07 & 0x80U) << 2) | ((crt07 & 0x04U) << 6) | - GetReg(CRTX(pATI->CPIO_VGABase), 0x10U)) + 0x0FU; - if (VSyncEnd >= VBlankEnd) - VSyncEnd = VBlankEnd - 1; - pATI->LockData.shadow_crt11 = (VSyncEnd & 0x0FU) | 0x20U; - PutReg(CRTX(pATI->CPIO_VGABase), 0x11U, - pATI->LockData.shadow_crt11); - pATI->LockData.shadow_crt11 |= 0x80U; - } - - /* Restore selection */ - if (pATI->Chip == ATI_CHIP_264LT) - { - outr(LCD_GEN_CTRL, saved_lcd_gen_ctrl); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - ATIMach64PutLCDReg(LCD_GEN_CNTL, saved_lcd_gen_ctrl); - - /* Restore LCD index */ - out8(LCD_INDEX, GetByte(pATI->LockData.lcd_index, 0)); - } - } - -#endif /* AVOID_CPIO */ - - } -} - -/* - * ATILock -- - * - * This function restores the state saved by ATIUnlock() above. - */ -void -ATILock -( - ATIPtr pATI -) -{ - -#ifndef AVOID_CPIO - - CARD32 tmp, saved_lcd_gen_ctrl = 0, lcd_gen_ctrl = 0; - -#endif /* AVOID_CPIO */ - - if (!pATI->Unlocked) - return; - pATI->Unlocked = FALSE; - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - if (pATI->LCDPanelID >= 0) - { - if (pATI->Chip == ATI_CHIP_264LT) - { - saved_lcd_gen_ctrl = inr(LCD_GEN_CTRL); - - /* Setup to lock non-shadow registers */ - lcd_gen_ctrl = saved_lcd_gen_ctrl & ~SHADOW_RW_EN; - outr(LCD_GEN_CTRL, lcd_gen_ctrl); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - saved_lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - - /* Setup to lock non-shadow registers */ - lcd_gen_ctrl = saved_lcd_gen_ctrl & - ~(CRTC_RW_SELECT | SHADOW_RW_EN); - ATIMach64PutLCDReg(LCD_GEN_CNTL, lcd_gen_ctrl); - } - } - - ATISetVGAIOBase(pATI, inb(R_GENMO)); - - /* Restore VGA locks */ - PutReg(CRTX(pATI->CPIO_VGABase), 0x03U, pATI->LockData.crt03); - PutReg(CRTX(pATI->CPIO_VGABase), 0x11U, pATI->LockData.crt11); - - if (pATI->LCDPanelID >= 0) - { - /* Setup to lock shadow registers */ - lcd_gen_ctrl |= SHADOW_RW_EN; - - if (pATI->Chip == ATI_CHIP_264LT) - outr(LCD_GEN_CTRL, lcd_gen_ctrl); - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - ATIMach64PutLCDReg(LCD_GEN_CNTL, lcd_gen_ctrl); - - /* Lock shadow registers */ - ATISetVGAIOBase(pATI, inb(R_GENMO)); - - PutReg(CRTX(pATI->CPIO_VGABase), 0x03U, - pATI->LockData.shadow_crt03); - PutReg(CRTX(pATI->CPIO_VGABase), 0x11U, - pATI->LockData.shadow_crt11); - - /* Restore selection */ - if (pATI->Chip == ATI_CHIP_264LT) - outr(LCD_GEN_CTRL, saved_lcd_gen_ctrl); - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - ATIMach64PutLCDReg(LCD_GEN_CNTL, saved_lcd_gen_ctrl); - } - - if (pATI->CPIO_VGAWonder) - { - /* - * Restore emulation and protection bits in ATI extended VGA - * registers. - */ - ATIModifyExtReg(pATI, 0xB1U, -1, 0xFCU, pATI->LockData.b1); - ATIModifyExtReg(pATI, 0xB4U, -1, 0x00U, pATI->LockData.b4); - ATIModifyExtReg(pATI, 0xB5U, -1, 0xBFU, pATI->LockData.b5); - ATIModifyExtReg(pATI, 0xB6U, -1, 0xDDU, pATI->LockData.b6); - ATIModifyExtReg(pATI, 0xB8U, -1, 0xC0U, pATI->LockData.b8 & 0x03U); - ATIModifyExtReg(pATI, 0xB9U, -1, 0x7FU, pATI->LockData.b9); - if (pATI->Chip > ATI_CHIP_18800) - { - ATIModifyExtReg(pATI, 0xBEU, -1, 0xFAU, pATI->LockData.be); - if (pATI->Chip >= ATI_CHIP_28800_2) - { - ATIModifyExtReg(pATI, 0xA6U, -1, 0x7FU, pATI->LockData.a6); - ATIModifyExtReg(pATI, 0xABU, -1, 0xE7U, pATI->LockData.ab); - } - } - ATIModifyExtReg(pATI, 0xB8U, -1, 0xC0U, pATI->LockData.b8); - } - } - - if (pATI->ChipHasSUBSYS_CNTL) - { - tmp = inw(SUBSYS_STAT) & _8PLANE; - - /* Reset the 8514/A and disable all interrupts */ - outw(SUBSYS_CNTL, tmp | (GPCTRL_RESET | CHPTEST_NORMAL)); - outw(SUBSYS_CNTL, tmp | (GPCTRL_ENAB | CHPTEST_NORMAL | RVBLNKFLG | - RPICKFLAG | RINVALIDIO | RGPIDLE)); - - /* Restore modified accelerator registers */ - outw(CLOCK_SEL, pATI->LockData.clock_sel); - if (pATI->Chip >= ATI_CHIP_68800) - { - outw(MISC_OPTIONS, pATI->LockData.misc_options); - outw(MEM_BNDRY, pATI->LockData.mem_bndry); - outw(MEM_CFG, pATI->LockData.mem_cfg); - } - - /* Wait for all activity to die down */ - ProbeWaitIdleEmpty(); - } - else if (pATI->Chip >= ATI_CHIP_88800GXC) - -#endif /* AVOID_CPIO */ - - { - /* Reset everything */ - outr(BUS_CNTL, pATI->LockData.bus_cntl); - - outr(CRTC_INT_CNTL, pATI->LockData.crtc_int_cntl); - - outr(GEN_TEST_CNTL, pATI->LockData.gen_test_cntl | GEN_GUI_EN); - outr(GEN_TEST_CNTL, pATI->LockData.gen_test_cntl); - outr(GEN_TEST_CNTL, pATI->LockData.gen_test_cntl | GEN_GUI_EN); - - outr(CRTC_GEN_CNTL, pATI->LockData.crtc_gen_cntl | CRTC_EN); - outr(CRTC_GEN_CNTL, pATI->LockData.crtc_gen_cntl); - outr(CRTC_GEN_CNTL, pATI->LockData.crtc_gen_cntl | CRTC_EN); - -#ifndef AVOID_CPIO - - outr(CONFIG_CNTL, pATI->LockData.config_cntl); - -#endif /* AVOID_CPIO */ - - outr(DAC_CNTL, pATI->LockData.dac_cntl); - if (pATI->Chip < ATI_CHIP_264CT) - outr(MEM_CNTL, pATI->LockData.mem_cntl); - if ((pATI->LCDPanelID >= 0) && (pATI->Chip != ATI_CHIP_264LT)) - { - outr(LCD_INDEX, pATI->LockData.lcd_index); - if (pATI->Chip != ATI_CHIP_264XL) - outr(SCRATCH_REG3, pATI->LockData.scratch_reg3); - } - if (pATI->Chip >= ATI_CHIP_264VTB) - { - outr(MPP_CONFIG, pATI->LockData.mpp_config); - outr(MPP_STROBE_SEQ, pATI->LockData.mpp_strobe_seq); - outr(TVO_CNTL, pATI->LockData.tvo_cntl); - if (pATI->Chip >= ATI_CHIP_264GT2C) - { - outr(HW_DEBUG, pATI->LockData.hw_debug); - if (pATI->Chip >= ATI_CHIP_264GTPRO) - { - outr(I2C_CNTL_0, pATI->LockData.i2c_cntl_0); - outr(I2C_CNTL_1, pATI->LockData.i2c_cntl_1); - } - } - } - } -} diff --git a/src/atilock.h b/src/atilock.h deleted file mode 100644 index 9b949436..00000000 --- a/src/atilock.h +++ /dev/null @@ -1,33 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atilock.h,v 1.5 2003/01/01 19:16:32 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATILOCK_H___ -#define ___ATILOCK_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -extern void ATIUnlock FunctionPrototype((ATIPtr)); -extern void ATILock FunctionPrototype((ATIPtr)); - -#endif /* ___ATILOCK_H___ */ diff --git a/src/atimach64.c b/src/atimach64.c deleted file mode 100644 index 72f4a106..00000000 --- a/src/atimach64.c +++ /dev/null @@ -1,1235 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64.c,v 1.52 2003/04/23 21:51:28 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ -/* - * Copyright 1999-2000 Precision Insight, Inc., Cedar Park, Texas. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to - * deal in the Software without restriction, including without limitation the - * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ -/* - * DRI support by: - * Manuel Teira - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#include "ati.h" -#include "atibus.h" -#include "atichip.h" -#include "atidac.h" -#include "atimach64.h" -#include "atimach64accel.h" -#include "atimach64io.h" -#include "atirgb514.h" - -#ifndef DPMS_SERVER -# define DPMS_SERVER -#endif -#include "extensions/dpms.h" - -/* - * ATIMach64PreInit -- - * - * This function fills in the Mach64 portion of an ATIHWRec that is common to - * all video modes generated by the driver. - */ -void -ATIMach64PreInit -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - CARD32 bus_cntl, config_cntl; - int tmp; - -#ifndef AVOID_CPIO - - if (pATI->depth <= 4) - { - pATIHW->crtc_off_pitch = SetBits(pATI->displayWidth >> 4, CRTC_PITCH); - } - else - -#endif /* AVOID_CPIO */ - - { - pATIHW->crtc_off_pitch = SetBits(pATI->displayWidth >> 3, CRTC_PITCH); - } - - if ((pATI->LockData.crtc_gen_cntl & CRTC_CSYNC_EN) && !pATI->OptionCSync) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Using composite sync to match input timing.\n"); - pATI->OptionCSync = TRUE; - } - - pATIHW->bus_cntl = bus_cntl = inr(BUS_CNTL); - if (pATI->Chip < ATI_CHIP_264VT4) - pATIHW->bus_cntl = (pATIHW->bus_cntl & ~BUS_HOST_ERR_INT_EN) | - BUS_HOST_ERR_INT; - if (pATI->Chip < ATI_CHIP_264VTB) - { - pATIHW->bus_cntl &= ~(BUS_FIFO_ERR_INT_EN | BUS_ROM_DIS); - pATIHW->bus_cntl |= SetBits(15, BUS_FIFO_WS) | BUS_FIFO_ERR_INT; - } - else if (pATI->MMIOInLinear) - { - pATIHW->bus_cntl &= ~BUS_APER_REG_DIS; - } - else - { - pATIHW->bus_cntl |= BUS_APER_REG_DIS; - } - if (pATI->Chip >= ATI_CHIP_264VT) - pATIHW->bus_cntl |= BUS_EXT_REG_EN; /* Enable Block 1 */ - -#ifdef AVOID_CPIO - - pATIHW->mem_vga_wp_sel = SetBits(0, MEM_VGA_WPS0) | - SetBits(1, MEM_VGA_WPS1); - pATIHW->mem_vga_rp_sel = SetBits(0, MEM_VGA_RPS0) | - SetBits(1, MEM_VGA_RPS1); - -#else /* AVOID_CPIO */ - - pATIHW->mem_vga_wp_sel = SetBits(0, MEM_VGA_WPS0) | - SetBits(pATIHW->nPlane, MEM_VGA_WPS1); - pATIHW->mem_vga_rp_sel = SetBits(0, MEM_VGA_RPS0) | - SetBits(pATIHW->nPlane, MEM_VGA_RPS1); - -#endif /* AVOID_CPIO */ - - pATIHW->dac_cntl = inr(DAC_CNTL) & - ~(DAC1_CLK_SEL | DAC_PALETTE_ACCESS_CNTL | DAC_8BIT_EN); - if (pATI->Chip >= ATI_CHIP_264CT) - pATIHW->dac_cntl &= ~DAC_FEA_CON_EN; - if (pATI->rgbBits == 8) - pATIHW->dac_cntl |= DAC_8BIT_EN; - - pATIHW->gen_test_cntl = pATI->LockData.gen_test_cntl & ~GEN_CUR_EN; - if (pATI->DAC == ATI_DAC_IBMRGB514) - pATIHW->gen_test_cntl |= GEN_OVR_OUTPUT_EN; - - pATIHW->config_cntl = config_cntl = inr(CONFIG_CNTL); - -#ifndef AVOID_CPIO - - if (pATI->UseSmallApertures) - { - pATIHW->config_cntl |= CFG_MEM_VGA_AP_EN; - } - else - -#endif /* AVOID_CPIO */ - - { - pATIHW->config_cntl &= ~CFG_MEM_VGA_AP_EN; - } - - if (pATI->LinearBase && (pATI->Chip < ATI_CHIP_264CT)) - { - /* Replace linear aperture size and address */ - pATIHW->config_cntl &= ~(CFG_MEM_AP_LOC | CFG_MEM_AP_SIZE); - pATIHW->config_cntl |= SetBits(pATI->LinearBase >> 22, CFG_MEM_AP_LOC); - if ((pATI->Chip < ATI_CHIP_264CT) && (pATI->VideoRAM < 4096)) - pATIHW->config_cntl |= SetBits(1, CFG_MEM_AP_SIZE); - else - pATIHW->config_cntl |= SetBits(2, CFG_MEM_AP_SIZE); - } - - if (pATI->Chip >= ATI_CHIP_264VTB) - { - pATIHW->mem_cntl = (pATI->LockData.mem_cntl & - ~(CTL_MEM_LOWER_APER_ENDIAN | CTL_MEM_UPPER_APER_ENDIAN)) | - SetBits(CTL_MEM_APER_BYTE_ENDIAN, CTL_MEM_LOWER_APER_ENDIAN); - - switch (pATI->bitsPerPixel) - { - default: - pATIHW->mem_cntl |= SetBits(CTL_MEM_APER_BYTE_ENDIAN, - CTL_MEM_UPPER_APER_ENDIAN); - break; - - case 16: - pATIHW->mem_cntl |= SetBits(CTL_MEM_APER_WORD_ENDIAN, - CTL_MEM_UPPER_APER_ENDIAN); - break; - - case 32: - pATIHW->mem_cntl |= SetBits(CTL_MEM_APER_LONG_ENDIAN, - CTL_MEM_UPPER_APER_ENDIAN); - break; - } - - pATIHW->mpp_config = inr(MPP_CONFIG); - pATIHW->mpp_config &= - ~(MPP_PRESCALE | MPP_NSTATES | MPP_FORMAT | MPP_WAIT_STATE | - MPP_INSERT_WAIT | MPP_TRISTATE_ADDR | MPP_AUTO_INC_EN | - MPP_CHKREQ_EN | MPP_BUFFER_SIZE | MPP_BUFFER_MODE | MPP_BUSY); - pATIHW->mpp_config |= - (MPP_NSTATES_8 | MPP_FORMAT_DA8 | SetBits(4, MPP_WAIT_STATE) | - MPP_CHKRDY_EN | MPP_READ_EARLY | MPP_RW_MODE | MPP_EN); - pATIHW->mpp_strobe_seq = inr(MPP_STROBE_SEQ); - pATIHW->mpp_strobe_seq &= ~(MPP_STB0_SEQ | MPP_STB1_SEQ); - pATIHW->mpp_strobe_seq |= - SetBits(0x0087U, MPP_STB0_SEQ) | SetBits(0x0083U, MPP_STB1_SEQ); - pATIHW->tvo_cntl = 0; - } - - /* Draw engine setup */ - if (pATI->Block0Base) - { - /* Ensure apertures are enabled */ - outr(BUS_CNTL, pATIHW->bus_cntl); - outr(CONFIG_CNTL, pATIHW->config_cntl); - - /* - * When possible, max out command FIFO size. - */ - if (pATI->Chip >= ATI_CHIP_264VT4) - -#ifdef XF86DRI - - /* Changing the FIFO depth seems to interfere with DMA, so use - * default of 128 entries (0x01) - */ - pATIHW->gui_cntl = (inm(GUI_CNTL) & ~CMDFIFO_SIZE_MODE) | 0x01; - -#else /* XF86DRI */ - - pATIHW->gui_cntl = inm(GUI_CNTL) & ~CMDFIFO_SIZE_MODE; - -#endif /* XF86DRI */ - - /* Initialise destination registers */ - pATIHW->dst_off_pitch = - SetBits((pATI->displayWidth * pATI->XModifier) >> 3, DST_PITCH); - pATIHW->dst_cntl = DST_X_DIR | DST_Y_DIR | DST_LAST_PEL; - - /* Initialise source registers */ - pATIHW->src_off_pitch = pATIHW->dst_off_pitch; - pATIHW->src_width1 = pATIHW->src_height1 = - pATIHW->src_width2 = pATIHW->src_height2 = 1; - pATIHW->src_cntl = SRC_LINE_X_DIR; - - /* Initialise scissor, allowing for offscreen areas */ - pATIHW->sc_right = (pATI->displayWidth * pATI->XModifier) - 1; - tmp = pATI->displayWidth * pATI->bitsPerPixel; - tmp = (((pScreenInfo->videoRam * (1024 * 8)) + tmp - 1) / tmp) - 1; - if (tmp > ATIMach64MaxY) - tmp = ATIMach64MaxY; - pATIHW->sc_bottom = tmp; - pATI->sc_left_right = SetWord(pATI->NewHW.sc_right, 1) | - SetWord(pATI->NewHW.sc_left, 0); - pATI->sc_top_bottom = SetWord(pATI->NewHW.sc_bottom, 1) | - SetWord(pATI->NewHW.sc_top, 0); - - /* Initialise data path */ - pATIHW->dp_frgd_clr = (CARD32)(-1); - pATIHW->dp_write_mask = (CARD32)(-1); - - switch (pATI->depth) - { - case 8: - pATIHW->dp_chain_mask = DP_CHAIN_8BPP; - pATIHW->dp_pix_width = - SetBits(PIX_WIDTH_8BPP, DP_DST_PIX_WIDTH) | - SetBits(PIX_WIDTH_8BPP, DP_SRC_PIX_WIDTH) | - SetBits(PIX_WIDTH_1BPP, DP_HOST_PIX_WIDTH); - break; - - case 15: - pATIHW->dp_chain_mask = DP_CHAIN_15BPP_1555; - pATIHW->dp_pix_width = - SetBits(PIX_WIDTH_15BPP, DP_DST_PIX_WIDTH) | - SetBits(PIX_WIDTH_15BPP, DP_SRC_PIX_WIDTH) | - SetBits(PIX_WIDTH_1BPP, DP_HOST_PIX_WIDTH); - break; - - case 16: - pATIHW->dp_chain_mask = DP_CHAIN_16BPP_565; - pATIHW->dp_pix_width = - SetBits(PIX_WIDTH_16BPP, DP_DST_PIX_WIDTH) | - SetBits(PIX_WIDTH_16BPP, DP_SRC_PIX_WIDTH) | - SetBits(PIX_WIDTH_1BPP, DP_HOST_PIX_WIDTH); - break; - - case 24: - if (pATI->bitsPerPixel == 24) - { - pATIHW->dp_chain_mask = DP_CHAIN_24BPP_888; - pATIHW->dp_pix_width = - SetBits(PIX_WIDTH_8BPP, DP_DST_PIX_WIDTH) | - SetBits(PIX_WIDTH_8BPP, DP_SRC_PIX_WIDTH) | - SetBits(PIX_WIDTH_1BPP, DP_HOST_PIX_WIDTH); - } - else - { - pATIHW->dp_chain_mask = DP_CHAIN_32BPP_8888; - pATIHW->dp_pix_width = - SetBits(PIX_WIDTH_32BPP, DP_DST_PIX_WIDTH) | - SetBits(PIX_WIDTH_32BPP, DP_SRC_PIX_WIDTH) | - SetBits(PIX_WIDTH_1BPP, DP_HOST_PIX_WIDTH); - } - break; - - default: - break; - } - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - - pATIHW->dp_pix_width |= DP_BYTE_PIX_ORDER; - -#endif /* X_BYTE_ORDER */ - - pATIHW->dp_mix = SetBits(MIX_SRC, DP_FRGD_MIX) | - SetBits(MIX_DST, DP_BKGD_MIX); - pATIHW->dp_src = DP_MONO_SRC_ALLONES | - SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC); - - /* Initialise colour compare */ - pATIHW->clr_cmp_msk = (1 << pATI->depth) - 1; - - if (pATI->Block1Base) - { - pATIHW->overlay_y_x_start = SetBits(0, OVERLAY_Y_START) | - SetBits(0, OVERLAY_X_START) | OVERLAY_LOCK_START; - pATIHW->overlay_y_x_end = SetBits(0, OVERLAY_Y_END) | - SetBits(0, OVERLAY_X_END) | OVERLAY_LOCK_END; - - pATIHW->overlay_graphics_key_clr = - (3 << ((2 * pATI->depth) / 3)) | - (2 << ((1 * pATI->depth) / 3)) | - (1 << ((0 * pATI->depth) / 3)); - pATIHW->overlay_graphics_key_msk = (1 << pATI->depth) - 1; - - pATIHW->overlay_key_cntl = - SetBits(OVERLAY_MIX_FALSE, OVERLAY_VIDEO_FN) | - SetBits(OVERLAY_MIX_EQUAL, OVERLAY_GRAPHICS_FN); - - pATIHW->overlay_scale_cntl = SCALE_EN; - - pATIHW->video_format = VIDEO_IN_VYUY422 | SCALER_IN_VYUY422; - - if (pATI->Chip >= ATI_CHIP_264GTPRO) - { - /* These values are documented voodoo */ - pATIHW->scaler_h_coeff0 = SetByte(0x20U, 1); - pATIHW->scaler_h_coeff1 = SetByte(0x0DU, 0) | - SetByte(0x20U, 1) | SetByte(0x06U, 2) | SetByte(0x0DU, 3); - pATIHW->scaler_h_coeff2 = SetByte(0x0DU, 0) | - SetByte(0x1CU, 1) | SetByte(0x0AU, 2) | SetByte(0x0DU, 3); - pATIHW->scaler_h_coeff3 = SetByte(0x0CU, 0) | - SetByte(0x1AU, 1) | SetByte(0x0EU, 2) | SetByte(0x0CU, 3); - pATIHW->scaler_h_coeff4 = SetByte(0x0CU, 0) | - SetByte(0x14U, 1) | SetByte(0x14U, 2) | SetByte(0x0CU, 3); - } - } - - /* Restore aperture enablement */ - outr(BUS_CNTL, bus_cntl); - outr(CONFIG_CNTL, config_cntl); - } -} - -/* - * ATIMach64Save -- - * - * This function is called to save the Mach64 portion of the current video - * state. - */ -void -ATIMach64Save -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - pATIHW->crtc_h_total_disp = inr(CRTC_H_TOTAL_DISP); - pATIHW->crtc_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID); - pATIHW->crtc_v_total_disp = inr(CRTC_V_TOTAL_DISP); - pATIHW->crtc_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID); - - pATIHW->crtc_off_pitch = inr(CRTC_OFF_PITCH); - - pATIHW->crtc_gen_cntl = inr(CRTC_GEN_CNTL); - - pATIHW->ovr_clr = inr(OVR_CLR); - pATIHW->ovr_wid_left_right = inr(OVR_WID_LEFT_RIGHT); - pATIHW->ovr_wid_top_bottom = inr(OVR_WID_TOP_BOTTOM); - - pATIHW->cur_clr0 = inr(CUR_CLR0); - pATIHW->cur_clr1 = inr(CUR_CLR1); - pATIHW->cur_offset = inr(CUR_OFFSET); - pATIHW->cur_horz_vert_posn = inr(CUR_HORZ_VERT_POSN); - pATIHW->cur_horz_vert_off = inr(CUR_HORZ_VERT_OFF); - - pATIHW->clock_cntl = inr(CLOCK_CNTL); - - pATIHW->bus_cntl = inr(BUS_CNTL); - - pATIHW->mem_vga_wp_sel = inr(MEM_VGA_WP_SEL); - pATIHW->mem_vga_rp_sel = inr(MEM_VGA_RP_SEL); - - pATIHW->dac_cntl = inr(DAC_CNTL); - - pATIHW->config_cntl = inr(CONFIG_CNTL); - - pATIHW->gen_test_cntl = inr(GEN_TEST_CNTL) & ~GEN_CUR_EN; - - if (pATI->Chip >= ATI_CHIP_264VTB) - { - pATIHW->mem_cntl = inr(MEM_CNTL); - pATIHW->mpp_config = inr(MPP_CONFIG); - pATIHW->mpp_strobe_seq = inr(MPP_STROBE_SEQ); - pATIHW->tvo_cntl = inr(TVO_CNTL); - } - - /* Save draw engine state */ - if (pATI->Block0Base && (pATIHW == &pATI->OldHW)) - { - /* Ensure apertures are enabled */ - outr(BUS_CNTL, pATI->NewHW.bus_cntl); - outr(CONFIG_CNTL, pATI->NewHW.config_cntl); - - ATIMach64WaitForIdle(pATI); - - /* Save FIFO size */ - if (pATI->Chip >= ATI_CHIP_264VT4) - pATIHW->gui_cntl = inm(GUI_CNTL); - - /* Save destination registers */ - pATIHW->dst_off_pitch = inm(DST_OFF_PITCH); - pATIHW->dst_x = inm(DST_X); - pATIHW->dst_y = inm(DST_Y); - pATIHW->dst_height = inm(DST_HEIGHT); - pATIHW->dst_bres_err = inm(DST_BRES_ERR); - pATIHW->dst_bres_inc = inm(DST_BRES_INC); - pATIHW->dst_bres_dec = inm(DST_BRES_DEC); - pATIHW->dst_cntl = inm(DST_CNTL); - - /* Save source registers */ - pATIHW->src_off_pitch = inm(SRC_OFF_PITCH); - pATIHW->src_x = inm(SRC_X); - pATIHW->src_y = inm(SRC_Y); - pATIHW->src_width1 = inm(SRC_WIDTH1); - pATIHW->src_height1 = inm(SRC_HEIGHT1); - pATIHW->src_x_start = inm(SRC_X_START); - pATIHW->src_y_start = inm(SRC_Y_START); - pATIHW->src_width2 = inm(SRC_WIDTH2); - pATIHW->src_height2 = inm(SRC_HEIGHT2); - pATIHW->src_cntl = inm(SRC_CNTL); - - /* Save host data register */ - pATIHW->host_cntl = inm(HOST_CNTL); - - /* Save pattern registers */ - pATIHW->pat_reg0 = inm(PAT_REG0); - pATIHW->pat_reg1 = inm(PAT_REG1); - pATIHW->pat_cntl = inm(PAT_CNTL); - - /* Save scissor registers */ - pATIHW->sc_left = pATI->sc_left = inm(SC_LEFT); - pATIHW->sc_right = pATI->sc_right = inm(SC_RIGHT); - pATIHW->sc_top = pATI->sc_top = inm(SC_TOP); - pATIHW->sc_bottom = pATI->sc_bottom = inm(SC_BOTTOM); - - /* Save data path registers */ - pATIHW->dp_bkgd_clr = inm(DP_BKGD_CLR); - pATIHW->dp_frgd_clr = inm(DP_FRGD_CLR); - pATIHW->dp_write_mask = inm(DP_WRITE_MASK); - pATIHW->dp_chain_mask = inm(DP_CHAIN_MASK); - pATIHW->dp_pix_width = inm(DP_PIX_WIDTH); - pATIHW->dp_mix = inm(DP_MIX); - pATIHW->dp_src = inm(DP_SRC); - - /* Save colour compare registers */ - pATIHW->clr_cmp_clr = inm(CLR_CMP_CLR); - pATIHW->clr_cmp_msk = inm(CLR_CMP_MSK); - pATIHW->clr_cmp_cntl = inm(CLR_CMP_CNTL); - - /* Save context */ - pATIHW->context_mask = inm(CONTEXT_MASK); - - if (pATI->Block1Base) - { - /* Save overlay & scaler registers */ - pATIHW->overlay_y_x_start = inm(OVERLAY_Y_X_START); - pATIHW->overlay_y_x_end = inm(OVERLAY_Y_X_END); - - pATIHW->overlay_graphics_key_clr = inm(OVERLAY_GRAPHICS_KEY_CLR); - pATIHW->overlay_graphics_key_msk = inm(OVERLAY_GRAPHICS_KEY_MSK); - - pATIHW->overlay_key_cntl = inm(OVERLAY_KEY_CNTL); - - pATIHW->overlay_scale_inc = inm(OVERLAY_SCALE_INC); - pATIHW->overlay_scale_cntl = inm(OVERLAY_SCALE_CNTL); - - pATIHW->scaler_height_width = inm(SCALER_HEIGHT_WIDTH); - - pATIHW->scaler_test = inm(SCALER_TEST); - - pATIHW->video_format = inm(VIDEO_FORMAT); - - if (pATI->Chip < ATI_CHIP_264VTB) - { - pATIHW->buf0_offset = inm(BUF0_OFFSET); - pATIHW->buf0_pitch = inm(BUF0_PITCH); - pATIHW->buf1_offset = inm(BUF1_OFFSET); - pATIHW->buf1_pitch = inm(BUF1_PITCH); - } - else - { - pATIHW->scaler_buf0_offset = inm(SCALER_BUF0_OFFSET); - pATIHW->scaler_buf1_offset = inm(SCALER_BUF1_OFFSET); - pATIHW->scaler_buf_pitch = inm(SCALER_BUF_PITCH); - - pATIHW->overlay_exclusive_horz = inm(OVERLAY_EXCLUSIVE_HORZ); - pATIHW->overlay_exclusive_vert = inm(OVERLAY_EXCLUSIVE_VERT); - - if (pATI->Chip >= ATI_CHIP_264GTPRO) - { - pATIHW->scaler_colour_cntl = inm(SCALER_COLOUR_CNTL); - - pATIHW->scaler_h_coeff0 = inm(SCALER_H_COEFF0); - pATIHW->scaler_h_coeff1 = inm(SCALER_H_COEFF1); - pATIHW->scaler_h_coeff2 = inm(SCALER_H_COEFF2); - pATIHW->scaler_h_coeff3 = inm(SCALER_H_COEFF3); - pATIHW->scaler_h_coeff4 = inm(SCALER_H_COEFF4); - - pATIHW->scaler_buf0_offset_u = inm(SCALER_BUF0_OFFSET_U); - pATIHW->scaler_buf0_offset_v = inm(SCALER_BUF0_OFFSET_V); - pATIHW->scaler_buf1_offset_u = inm(SCALER_BUF1_OFFSET_U); - pATIHW->scaler_buf1_offset_v = inm(SCALER_BUF1_OFFSET_V); - } - } - } - - /* Restore aperture enablement */ - outr(BUS_CNTL, pATIHW->bus_cntl); - outr(CONFIG_CNTL, pATIHW->config_cntl); - } -} - -/* - * ATIMach64Calculate -- - * - * This function is called to fill in the Mach64 portion of an ATIHWRec. - */ -void -ATIMach64Calculate -( - ATIPtr pATI, - ATIHWPtr pATIHW, - DisplayModePtr pMode -) -{ - int VDisplay; - - /* If not already done adjust horizontal timings */ - if (!pMode->CrtcHAdjusted) - { - pMode->CrtcHAdjusted = TRUE; - /* XXX Deal with Blank Start/End and overscan later */ - pMode->CrtcHDisplay = (pMode->HDisplay >> 3) - 1; - pMode->CrtcHSyncStart = (pMode->HSyncStart >> 3) - 1; - pMode->CrtcHSyncEnd = (pMode->HSyncEnd >> 3) - 1; - pMode->CrtcHTotal = (pMode->HTotal >> 3) - 1; - - /* Make adjustments if sync pulse width is out-of-bounds */ - if ((pMode->CrtcHSyncEnd - pMode->CrtcHSyncStart) > - (int)MaxBits(CRTC_H_SYNC_WID)) - { - pMode->CrtcHSyncEnd = - pMode->CrtcHSyncStart + MaxBits(CRTC_H_SYNC_WID); - } - else if (pMode->CrtcHSyncStart == pMode->CrtcHSyncEnd) - { - if (pMode->CrtcHDisplay < pMode->CrtcHSyncStart) - pMode->CrtcHSyncStart--; - else if (pMode->CrtcHSyncEnd < pMode->CrtcHTotal) - pMode->CrtcHSyncEnd++; - } - } - - /* - * Always re-do vertical adjustments. - */ - pMode->CrtcVDisplay = pMode->VDisplay; - pMode->CrtcVSyncStart = pMode->VSyncStart; - pMode->CrtcVSyncEnd = pMode->VSyncEnd; - pMode->CrtcVTotal = pMode->VTotal; - - if ((pATI->Chip >= ATI_CHIP_264CT) && - ((pMode->Flags & V_DBLSCAN) || (pMode->VScan > 1))) - { - pMode->CrtcVDisplay <<= 1; - pMode->CrtcVSyncStart <<= 1; - pMode->CrtcVSyncEnd <<= 1; - pMode->CrtcVTotal <<= 1; - } - - /* - * Might as well default to the same as VGA with respect to sync - * polarities. - */ - if ((!(pMode->Flags & (V_PHSYNC | V_NHSYNC))) || - (!(pMode->Flags & (V_PVSYNC | V_NVSYNC)))) - { - pMode->Flags &= ~(V_PHSYNC | V_NHSYNC | V_PVSYNC | V_NVSYNC); - - if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0)) - VDisplay = pATI->LCDVertical; - else - VDisplay = pMode->CrtcVDisplay; - - if (VDisplay < 400) - pMode->Flags |= V_PHSYNC | V_NVSYNC; - else if (VDisplay < 480) - pMode->Flags |= V_NHSYNC | V_PVSYNC; - else if (VDisplay < 768) - pMode->Flags |= V_NHSYNC | V_NVSYNC; - else - pMode->Flags |= V_PHSYNC | V_PVSYNC; - } - - pMode->CrtcVDisplay--; - pMode->CrtcVSyncStart--; - pMode->CrtcVSyncEnd--; - pMode->CrtcVTotal--; - /* Make sure sync pulse is not too wide */ - if ((pMode->CrtcVSyncEnd - pMode->CrtcVSyncStart) > - (int)MaxBits(CRTC_V_SYNC_WID)) - pMode->CrtcVSyncEnd = pMode->CrtcVSyncStart + MaxBits(CRTC_V_SYNC_WID); - pMode->CrtcVAdjusted = TRUE; /* Redundant */ - - /* Build register contents */ - pATIHW->crtc_h_total_disp = - SetBits(pMode->CrtcHTotal, CRTC_H_TOTAL) | - SetBits(pMode->CrtcHDisplay, CRTC_H_DISP); - pATIHW->crtc_h_sync_strt_wid = - SetBits(pMode->CrtcHSyncStart, CRTC_H_SYNC_STRT) | - SetBits(pMode->CrtcHSkew, CRTC_H_SYNC_DLY) | /* ? */ - SetBits(GetBits(pMode->CrtcHSyncStart, 0x0100U), - CRTC_H_SYNC_STRT_HI) | - SetBits(pMode->CrtcHSyncEnd - pMode->CrtcHSyncStart, - CRTC_H_SYNC_WID); - if (pMode->Flags & V_NHSYNC) - pATIHW->crtc_h_sync_strt_wid |= CRTC_H_SYNC_POL; - - pATIHW->crtc_v_total_disp = - SetBits(pMode->CrtcVTotal, CRTC_V_TOTAL) | - SetBits(pMode->CrtcVDisplay, CRTC_V_DISP); - pATIHW->crtc_v_sync_strt_wid = - SetBits(pMode->CrtcVSyncStart, CRTC_V_SYNC_STRT) | - SetBits(pMode->CrtcVSyncEnd - pMode->CrtcVSyncStart, - CRTC_V_SYNC_WID); - if (pMode->Flags & V_NVSYNC) - pATIHW->crtc_v_sync_strt_wid |= CRTC_V_SYNC_POL; - - pATIHW->crtc_gen_cntl = inr(CRTC_GEN_CNTL) & - ~(CRTC_DBL_SCAN_EN | CRTC_INTERLACE_EN | - CRTC_HSYNC_DIS | CRTC_VSYNC_DIS | CRTC_CSYNC_EN | - CRTC_PIX_BY_2_EN | CRTC_DISPLAY_DIS | CRTC_VGA_XOVERSCAN | - CRTC_PIX_WIDTH | CRTC_BYTE_PIX_ORDER | - CRTC_VGA_128KAP_PAGING | CRTC_VFC_SYNC_TRISTATE | - CRTC_LOCK_REGS | /* Already off, but ... */ - CRTC_SYNC_TRISTATE | CRTC_DISP_REQ_EN | - CRTC_VGA_TEXT_132 | CRTC_CUR_B_TEST); - pATIHW->crtc_gen_cntl |= - CRTC_EXT_DISP_EN | CRTC_EN | CRTC_VGA_LINEAR | CRTC_CNT_EN; - switch (pATI->depth) - { - -#ifndef AVOID_CPIO - - case 1: - pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_1BPP, CRTC_PIX_WIDTH); - break; - - case 4: - pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_4BPP, CRTC_PIX_WIDTH); - break; - -#endif /* AVOID_CPIO */ - - case 8: - pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_8BPP, CRTC_PIX_WIDTH); - break; - - case 15: - pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_15BPP, CRTC_PIX_WIDTH); - break; - - case 16: - pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_16BPP, CRTC_PIX_WIDTH); - break; - - case 24: - if (pATI->bitsPerPixel == 24) - { - pATIHW->crtc_gen_cntl |= - SetBits(PIX_WIDTH_24BPP, CRTC_PIX_WIDTH); - break; - } - if (pATI->bitsPerPixel != 32) - break; - /* Fall through */ - - case 32: - pATIHW->crtc_gen_cntl |= SetBits(PIX_WIDTH_32BPP, CRTC_PIX_WIDTH); - break; - - default: - break; - } - if ((pMode->Flags & V_DBLSCAN) || (pMode->VScan > 1)) - pATIHW->crtc_gen_cntl |= CRTC_DBL_SCAN_EN; - if (pMode->Flags & V_INTERLACE) - pATIHW->crtc_gen_cntl |= CRTC_INTERLACE_EN; - if (pATI->OptionCSync || (pMode->Flags & (V_CSYNC | V_PCSYNC))) - pATIHW->crtc_gen_cntl |= CRTC_CSYNC_EN; - /* For now, set display FIFO low water mark as high as possible */ - if (pATI->Chip < ATI_CHIP_264VTB) - pATIHW->crtc_gen_cntl |= CRTC_FIFO_LWM; -} - -/* - * ATIMach64Set -- - * - * This function is called to load a Mach64's accelerator CRTC and draw engine. - */ -void -ATIMach64Set -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - -#ifndef AVOID_CPIO - - if (pATIHW->crtc == ATI_CRTC_MACH64) - -#endif /* AVOID_CPIO */ - - { - if ((pATIHW->FeedbackDivider > 0) && - (pATI->ProgrammableClock != ATI_CLOCK_NONE)) - ATIClockSet(pATI, pATIHW); /* Programme clock */ - - if (pATI->DAC == ATI_DAC_IBMRGB514) - ATIRGB514Set(pATI, pATIHW); - - /* Load Mach64 CRTC registers */ - outr(CRTC_H_TOTAL_DISP, pATIHW->crtc_h_total_disp); - outr(CRTC_H_SYNC_STRT_WID, pATIHW->crtc_h_sync_strt_wid); - outr(CRTC_V_TOTAL_DISP, pATIHW->crtc_v_total_disp); - outr(CRTC_V_SYNC_STRT_WID, pATIHW->crtc_v_sync_strt_wid); - - outr(CRTC_OFF_PITCH, pATIHW->crtc_off_pitch); - - /* Load overscan registers */ - outr(OVR_CLR, pATIHW->ovr_clr); - outr(OVR_WID_LEFT_RIGHT, pATIHW->ovr_wid_left_right); - outr(OVR_WID_TOP_BOTTOM, pATIHW->ovr_wid_top_bottom); - - /* Load hardware cursor registers */ - outr(CUR_CLR0, pATIHW->cur_clr0); - outr(CUR_CLR1, pATIHW->cur_clr1); - outr(CUR_OFFSET, pATIHW->cur_offset); - outr(CUR_HORZ_VERT_POSN, pATIHW->cur_horz_vert_posn); - outr(CUR_HORZ_VERT_OFF, pATIHW->cur_horz_vert_off); - - /* Set pixel clock */ - outr(CLOCK_CNTL, pATIHW->clock_cntl | CLOCK_STROBE); - - outr(GEN_TEST_CNTL, pATIHW->gen_test_cntl | GEN_GUI_EN); - outr(GEN_TEST_CNTL, pATIHW->gen_test_cntl); - outr(GEN_TEST_CNTL, pATIHW->gen_test_cntl | GEN_GUI_EN); - - /* Finalise CRTC setup and turn on the screen */ - outr(CRTC_GEN_CNTL, pATIHW->crtc_gen_cntl); - } - - /* Load draw engine */ - if (pATI->Block0Base) - { - /* Clobber MMIO cache */ - (void)memset(pATI->MMIOCached, 0, SizeOf(pATI->MMIOCached)); - - /* Ensure apertures are enabled */ - outr(BUS_CNTL, pATI->NewHW.bus_cntl); - outr(CONFIG_CNTL, pATI->NewHW.config_cntl); - - pATI->EngineIsBusy = TRUE; /* Force engine poll */ - ATIMach64WaitForIdle(pATI); - - /* Load FIFO size */ - if (pATI->Chip >= ATI_CHIP_264VT4) - { - outm(GUI_CNTL, pATIHW->gui_cntl); - pATI->nAvailableFIFOEntries = 0; - ATIMach64PollEngineStatus(pATI); - } - - /* Set FIFO depth */ - pATI->nFIFOEntries = pATI->nAvailableFIFOEntries; - - /* Load destination registers */ - ATIMach64WaitForFIFO(pATI, 7); - outf(DST_OFF_PITCH, pATIHW->dst_off_pitch); - outf(DST_Y_X, SetWord(pATIHW->dst_x, 1) | SetWord(pATIHW->dst_y, 0)); - outf(DST_HEIGHT, pATIHW->dst_height); - outf(DST_BRES_ERR, pATIHW->dst_bres_err); - outf(DST_BRES_INC, pATIHW->dst_bres_inc); - outf(DST_BRES_DEC, pATIHW->dst_bres_dec); - outf(DST_CNTL, pATIHW->dst_cntl); - - /* Load source registers */ - ATIMach64WaitForFIFO(pATI, 6); - outf(SRC_OFF_PITCH, pATIHW->src_off_pitch); - outf(SRC_Y_X, SetWord(pATIHW->src_x, 1) | SetWord(pATIHW->src_y, 0)); - outf(SRC_HEIGHT1_WIDTH1, - SetWord(pATIHW->src_width1, 1) | SetWord(pATIHW->src_height1, 0)); - outf(SRC_Y_X_START, - SetWord(pATIHW->src_x_start, 1) | SetWord(pATIHW->src_y_start, 0)); - outf(SRC_HEIGHT2_WIDTH2, - SetWord(pATIHW->src_width2, 1) | SetWord(pATIHW->src_height2, 0)); - outf(SRC_CNTL, pATIHW->src_cntl); - - /* Load host data register */ - ATIMach64WaitForFIFO(pATI, 1); - outf(HOST_CNTL, pATIHW->host_cntl); - - /* Set host transfer window address and size clamp */ - pATI->pHOST_DATA = - (CARD8 *)pATI->pBlock[GetBits(HOST_DATA_0, BLOCK_SELECT)] + - (HOST_DATA_0 & MM_IO_SELECT); - pATI->nHostFIFOEntries = pATI->nFIFOEntries >> 1; - if (pATI->nHostFIFOEntries > 16) - pATI->nHostFIFOEntries = 16; - - /* Load pattern registers */ - ATIMach64WaitForFIFO(pATI, 3); - outf(PAT_REG0, pATIHW->pat_reg0); - outf(PAT_REG1, pATIHW->pat_reg1); - outf(PAT_CNTL, pATIHW->pat_cntl); - - /* Load scissor registers */ - ATIMach64WaitForFIFO(pATI, 2); - outf(SC_LEFT_RIGHT, - SetWord(pATIHW->sc_right, 1) | SetWord(pATIHW->sc_left, 0)); - outf(SC_TOP_BOTTOM, - SetWord(pATIHW->sc_bottom, 1) | SetWord(pATIHW->sc_top, 0)); - pATI->sc_left = pATIHW->sc_left; - pATI->sc_right = pATIHW->sc_right; - pATI->sc_top = pATIHW->sc_top; - pATI->sc_bottom = pATIHW->sc_bottom; - - /* Load data path registers */ - ATIMach64WaitForFIFO(pATI, 7); - outf(DP_BKGD_CLR, pATIHW->dp_bkgd_clr); - outf(DP_FRGD_CLR, pATIHW->dp_frgd_clr); - outf(DP_WRITE_MASK, pATIHW->dp_write_mask); - outf(DP_CHAIN_MASK, pATIHW->dp_chain_mask); - outf(DP_PIX_WIDTH, pATIHW->dp_pix_width); - outf(DP_MIX, pATIHW->dp_mix); - outf(DP_SRC, pATIHW->dp_src); - - /* Load colour compare registers */ - ATIMach64WaitForFIFO(pATI, 3); - outf(CLR_CMP_CLR, pATIHW->clr_cmp_clr); - outf(CLR_CMP_MSK, pATIHW->clr_cmp_msk); - outf(CLR_CMP_CNTL, pATIHW->clr_cmp_cntl); - - /* Load context mask */ - ATIMach64WaitForFIFO(pATI, 1); - outf(CONTEXT_MASK, pATIHW->context_mask); - - if (pATI->Block1Base) - { - /* Load overlay & scaler registers */ - ATIMach64WaitForFIFO(pATI, 10); - outf(OVERLAY_Y_X_START, pATIHW->overlay_y_x_start); - outf(OVERLAY_Y_X_END, pATIHW->overlay_y_x_end); - - outf(OVERLAY_GRAPHICS_KEY_CLR, pATIHW->overlay_graphics_key_clr); - outf(OVERLAY_GRAPHICS_KEY_MSK, pATIHW->overlay_graphics_key_msk); - - outf(OVERLAY_KEY_CNTL, pATIHW->overlay_key_cntl); - - outf(OVERLAY_SCALE_INC, pATIHW->overlay_scale_inc); - outf(OVERLAY_SCALE_CNTL, pATIHW->overlay_scale_cntl); - - outf(SCALER_HEIGHT_WIDTH, pATIHW->scaler_height_width); - - outf(SCALER_TEST, pATIHW->scaler_test); - - outf(VIDEO_FORMAT, pATIHW->video_format); - - if (pATI->Chip < ATI_CHIP_264VTB) - { - ATIMach64WaitForFIFO(pATI, 4); - outf(BUF0_OFFSET, pATIHW->buf0_offset); - outf(BUF0_PITCH, pATIHW->buf0_pitch); - outf(BUF1_OFFSET, pATIHW->buf1_offset); - outf(BUF1_PITCH, pATIHW->buf1_pitch); - } - else - { - ATIMach64WaitForFIFO(pATI, 5); - outf(SCALER_BUF0_OFFSET, pATIHW->scaler_buf0_offset); - outf(SCALER_BUF1_OFFSET, pATIHW->scaler_buf1_offset); - outf(SCALER_BUF_PITCH, pATIHW->scaler_buf_pitch); - - outf(OVERLAY_EXCLUSIVE_HORZ, pATIHW->overlay_exclusive_horz); - outf(OVERLAY_EXCLUSIVE_VERT, pATIHW->overlay_exclusive_vert); - - if (pATI->Chip >= ATI_CHIP_264GTPRO) - { - ATIMach64WaitForFIFO(pATI, 10); - outf(SCALER_COLOUR_CNTL, pATIHW->scaler_colour_cntl); - - outf(SCALER_H_COEFF0, pATIHW->scaler_h_coeff0); - outf(SCALER_H_COEFF1, pATIHW->scaler_h_coeff1); - outf(SCALER_H_COEFF2, pATIHW->scaler_h_coeff2); - outf(SCALER_H_COEFF3, pATIHW->scaler_h_coeff3); - outf(SCALER_H_COEFF4, pATIHW->scaler_h_coeff4); - - outf(SCALER_BUF0_OFFSET_U, pATIHW->scaler_buf0_offset_u); - outf(SCALER_BUF0_OFFSET_V, pATIHW->scaler_buf0_offset_v); - outf(SCALER_BUF1_OFFSET_U, pATIHW->scaler_buf1_offset_u); - outf(SCALER_BUF1_OFFSET_V, pATIHW->scaler_buf1_offset_v); - } - } - } - - ATIMach64WaitForIdle(pATI); - - if (pATI->OptionMMIOCache) - { - /* - * Enable write caching for selected MMIO registers. This can only - * be done for those registers whose value does not change without - * driver intervention. - */ - - CacheRegister(SRC_CNTL); - - CacheRegister(HOST_CNTL); - - CacheRegister(PAT_REG0); - CacheRegister(PAT_REG1); - CacheRegister(PAT_CNTL); - - CacheRegister(SC_LEFT_RIGHT); - CacheRegister(SC_TOP_BOTTOM); - - CacheRegister(DP_BKGD_CLR); - CacheRegister(DP_FRGD_CLR); - CacheRegister(DP_WRITE_MASK); - CacheRegister(DP_MIX); - - CacheRegister(CLR_CMP_CLR); - CacheRegister(CLR_CMP_MSK); - CacheRegister(CLR_CMP_CNTL); - - if (pATI->Block1Base) - { - CacheRegister(OVERLAY_Y_X_START); - CacheRegister(OVERLAY_Y_X_END); - - CacheRegister(OVERLAY_GRAPHICS_KEY_CLR); - CacheRegister(OVERLAY_GRAPHICS_KEY_MSK); - - CacheRegister(OVERLAY_KEY_CNTL); - - CacheRegister(OVERLAY_SCALE_INC); - CacheRegister(OVERLAY_SCALE_CNTL); - - CacheRegister(SCALER_HEIGHT_WIDTH); - - CacheRegister(SCALER_TEST); - - CacheRegister(VIDEO_FORMAT); - - if (pATI->Chip < ATI_CHIP_264VTB) - { - CacheRegister(BUF0_OFFSET); - CacheRegister(BUF0_PITCH); - CacheRegister(BUF1_OFFSET); - CacheRegister(BUF1_PITCH); - } - else - { - CacheRegister(SCALER_BUF0_OFFSET); - CacheRegister(SCALER_BUF1_OFFSET); - CacheRegister(SCALER_BUF_PITCH); - - CacheRegister(OVERLAY_EXCLUSIVE_HORZ); - CacheRegister(OVERLAY_EXCLUSIVE_VERT); - - if (pATI->Chip >= ATI_CHIP_264GTPRO) - { - CacheRegister(SCALER_COLOUR_CNTL); - - CacheRegister(SCALER_H_COEFF0); - CacheRegister(SCALER_H_COEFF1); - CacheRegister(SCALER_H_COEFF2); - CacheRegister(SCALER_H_COEFF3); - CacheRegister(SCALER_H_COEFF4); - - CacheRegister(SCALER_BUF0_OFFSET_U); - CacheRegister(SCALER_BUF0_OFFSET_V); - CacheRegister(SCALER_BUF1_OFFSET_U); - CacheRegister(SCALER_BUF1_OFFSET_V); - } - } - } - } - } - -#ifndef AVOID_CPIO - - if (pATIHW->crtc == ATI_CRTC_MACH64) - -#endif /* AVOID_CPIO */ - - { - /* Aperture setup */ - outr(MEM_VGA_WP_SEL, pATIHW->mem_vga_wp_sel); - outr(MEM_VGA_RP_SEL, pATIHW->mem_vga_rp_sel); - - outr(DAC_CNTL, pATIHW->dac_cntl); - - outr(CONFIG_CNTL, pATIHW->config_cntl); - outr(BUS_CNTL, pATIHW->bus_cntl); - - if (pATI->Chip >= ATI_CHIP_264VTB) - { - outr(MEM_CNTL, pATIHW->mem_cntl); - outr(MPP_CONFIG, pATIHW->mpp_config); - outr(MPP_STROBE_SEQ, pATIHW->mpp_strobe_seq); - outr(TVO_CNTL, pATIHW->tvo_cntl); - } - } -} - -/* - * ATIMach64SaveScreen -- - * - * This function blanks or unblanks a Mach64 screen. - */ -void -ATIMach64SaveScreen -( - ATIPtr pATI, - int Mode -) -{ - CARD32 crtc_gen_cntl = inr(CRTC_GEN_CNTL); - - switch (Mode) - { - case SCREEN_SAVER_OFF: - case SCREEN_SAVER_FORCER: - outr(CRTC_GEN_CNTL, crtc_gen_cntl & ~CRTC_DISPLAY_DIS); - break; - - case SCREEN_SAVER_ON: - case SCREEN_SAVER_CYCLE: - outr(CRTC_GEN_CNTL, crtc_gen_cntl | CRTC_DISPLAY_DIS); - break; - - default: - break; - } -} - -/* - * ATIMach64SetDPMSMode -- - * - * This function sets a Mach64's VESA Display Power Management Signaling mode. - */ -void -ATIMach64SetDPMSMode -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - int DPMSMode -) -{ - CARD32 crtc_gen_cntl = - inr(CRTC_GEN_CNTL) & ~(CRTC_HSYNC_DIS | CRTC_VSYNC_DIS); - - switch (DPMSMode) - { - case DPMSModeOn: /* HSync on, VSync on */ - break; - - case DPMSModeStandby: /* HSync off, VSync on */ - crtc_gen_cntl |= CRTC_HSYNC_DIS; - break; - - case DPMSModeSuspend: /* HSync on, VSync off */ - crtc_gen_cntl |= CRTC_VSYNC_DIS; - break; - - case DPMSModeOff: /* HSync off, VSync off */ - crtc_gen_cntl |= CRTC_HSYNC_DIS | CRTC_VSYNC_DIS; - break; - - default: /* Muffle compiler */ - return; - } - -#ifdef XF86DRI - - /* XAA Sync requires the DRM lock if DRI enabled */ - ATIDRILock(pScreenInfo); - -#endif /* XF86DRI */ - - ATIMach64Sync(pScreenInfo); - - outr(CRTC_GEN_CNTL, crtc_gen_cntl); - - if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0)) - { - CARD32 lcd_index = 0; - - /* - * ATI's BIOS simply turns the panel on and off, so do the same by - * default, but keep the previous behaviour around for reference. - */ - if (pATI->OptionDevel) - { - CARD32 power_management; - - if (pATI->Chip == ATI_CHIP_264LT) - { - power_management = inr(POWER_MANAGEMENT); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - lcd_index = inr(LCD_INDEX); - power_management = ATIMach64GetLCDReg(LCD_POWER_MANAGEMENT); - } - - power_management &= ~(STANDBY_NOW | SUSPEND_NOW); - - switch (DPMSMode) - { - case DPMSModeOn: - break; - - case DPMSModeStandby: - power_management |= STANDBY_NOW; - break; - - case DPMSModeSuspend: - power_management |= SUSPEND_NOW; - break; - - case DPMSModeOff: - power_management |= STANDBY_NOW | SUSPEND_NOW; /* ? */ - break; - - default: /* Muffle compiler */ - return; - } - - if (pATI->Chip == ATI_CHIP_264LT) - { - outr(POWER_MANAGEMENT, power_management); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - ATIMach64PutLCDReg(LCD_POWER_MANAGEMENT, power_management); - outr(LCD_INDEX, lcd_index); - } - } - else - { - CARD32 lcd_gen_ctrl; - - if (pATI->Chip == ATI_CHIP_264LT) - { - lcd_gen_ctrl = inr(LCD_GEN_CTRL); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - lcd_index = inr(LCD_INDEX); - lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - } - - if (DPMSMode == DPMSModeOn) - lcd_gen_ctrl |= LCD_ON; - else - lcd_gen_ctrl &= ~LCD_ON; - - if (pATI->Chip == ATI_CHIP_264LT) - outr(LCD_GEN_CTRL, lcd_gen_ctrl); - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - ATIMach64PutLCDReg(LCD_GEN_CNTL, lcd_gen_ctrl); - outr(LCD_INDEX, lcd_index); - } - } - } - -#ifdef XF86DRI - - ATIDRIUnlock(pScreenInfo); - -#endif /* XF86DRI */ - -} diff --git a/src/atimach64.h b/src/atimach64.h deleted file mode 100644 index dd2e9a9b..00000000 --- a/src/atimach64.h +++ /dev/null @@ -1,40 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64.h,v 1.17 2003/04/23 21:51:28 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIMACH64_H___ -#define ___ATIMACH64_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -extern void ATIMach64PreInit FunctionPrototype((ScrnInfoPtr, ATIPtr, - ATIHWPtr)); -extern void ATIMach64Save FunctionPrototype((ATIPtr, ATIHWPtr)); -extern void ATIMach64Calculate FunctionPrototype((ATIPtr, ATIHWPtr, - DisplayModePtr)); -extern void ATIMach64Set FunctionPrototype((ATIPtr, ATIHWPtr)); - -extern void ATIMach64SaveScreen FunctionPrototype((ATIPtr, int)); -extern void ATIMach64SetDPMSMode FunctionPrototype((ScrnInfoPtr, ATIPtr, int)); - -#endif /* ___ATIMACH64_H___ */ diff --git a/src/atimach64accel.c b/src/atimach64accel.c deleted file mode 100644 index b7b8e076..00000000 --- a/src/atimach64accel.c +++ /dev/null @@ -1,1031 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64accel.c,v 1.1 2003/04/23 21:51:28 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ -/* - * Copyright 1999-2000 Precision Insight, Inc., Cedar Park, Texas. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to - * deal in the Software without restriction, including without limitation the - * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ -/* - * DRI support by: - * Manuel Teira - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#include "ati.h" -#include "atichip.h" -#include "atimach64accel.h" -#include "atimach64io.h" -#include "atipriv.h" -#include "atiregs.h" - -#include "mach64_common.h" - -#include "miline.h" - -/* Used to test MMIO cache integrity in ATIMach64Sync() */ -#define TestRegisterCaching(_Register) \ - if (RegisterIsCached(_Register) && \ - (CacheSlot(_Register) != inm(_Register))) \ - { \ - UncacheRegister(_Register); \ - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, \ - #_Register " MMIO write cache disabled!\n"); \ - } - -/* - * X-to-Mach64 mix translation table. - */ -static CARD8 ATIMach64ALU[16] = -{ - MIX_0, /* GXclear */ - MIX_AND, /* GXand */ - MIX_SRC_AND_NOT_DST, /* GXandReverse */ - MIX_SRC, /* GXcopy */ - MIX_NOT_SRC_AND_DST, /* GXandInverted */ - MIX_DST, /* GXnoop */ - MIX_XOR, /* GXxor */ - MIX_OR, /* GXor */ - MIX_NOR, /* GXnor */ - MIX_XNOR, /* GXequiv */ - MIX_NOT_DST, /* GXinvert */ - MIX_SRC_OR_NOT_DST, /* GXorReverse */ - MIX_NOT_SRC, /* GXcopyInverted */ - MIX_NOT_SRC_OR_DST, /* GXorInverted */ - MIX_NAND, /* GXnand */ - MIX_1 /* GXset */ -}; - -/* - * ATIMach64ValidateClip -- - * - * This function ensures the current scissor settings do not interfere with - * the current draw request. - */ -static void -ATIMach64ValidateClip -( - ATIPtr pATI, - int sc_left, - int sc_right, - int sc_top, - int sc_bottom -) -{ - if ((sc_left < (int)pATI->sc_left) || (sc_right > (int)pATI->sc_right)) - { - outf(SC_LEFT_RIGHT, pATI->sc_left_right); - pATI->sc_left = pATI->NewHW.sc_left; - pATI->sc_right = pATI->NewHW.sc_right; - } - - if ((sc_top < (int)pATI->sc_top) || (sc_bottom > (int)pATI->sc_bottom)) - { - outf(SC_TOP_BOTTOM, pATI->sc_top_bottom); - pATI->sc_top = pATI->NewHW.sc_top; - pATI->sc_bottom = pATI->NewHW.sc_bottom; - } -} - -/* - * ATIMach64Sync -- - * - * This is called to wait for the draw engine to become idle. - */ -void -ATIMach64Sync -( - ScrnInfoPtr pScreenInfo -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - -#ifdef XF86DRI - - if ( pATI->directRenderingEnabled && pATI->NeedDRISync ) - { - ATIHWPtr pATIHW = &pATI->NewHW; - - if (pATI->OptionMMIOCache) { - /* "Invalidate" the MMIO cache so the cache slots get updated */ - UncacheRegister(SRC_CNTL); - UncacheRegister(HOST_CNTL); - UncacheRegister(PAT_CNTL); - UncacheRegister(SC_LEFT_RIGHT); - UncacheRegister(SC_TOP_BOTTOM); - UncacheRegister(DP_BKGD_CLR); - UncacheRegister(DP_FRGD_CLR); - UncacheRegister(DP_WRITE_MASK); - UncacheRegister(DP_MIX); - UncacheRegister(CLR_CMP_CNTL); - } - - ATIDRIWaitForIdle(pATI); - - outr( BUS_CNTL, pATIHW->bus_cntl ); - - /* DRI uses GUI_TRAJ_CNTL, which is a composite of - * src_cntl, dst_cntl, pat_cntl, and host_cntl - */ - outf( SRC_CNTL, pATIHW->src_cntl ); - outf( DST_CNTL, pATIHW->dst_cntl ); - outf( PAT_CNTL, pATIHW->pat_cntl ); - outf( HOST_CNTL, pATIHW->host_cntl ); - - outf( DST_OFF_PITCH, pATIHW->dst_off_pitch ); - outf( SRC_OFF_PITCH, pATIHW->src_off_pitch ); - outf( DP_SRC, pATIHW->dp_src ); - outf( DP_MIX, pATIHW->dp_mix ); - outf( DP_FRGD_CLR, pATIHW->dp_frgd_clr ); - outf( DP_WRITE_MASK, pATIHW->dp_write_mask ); - - outf( DP_PIX_WIDTH, pATIHW->dp_pix_width ); - outf( CLR_CMP_CNTL, pATIHW->clr_cmp_cntl ); - outf( ALPHA_TST_CNTL, 0 ); - outf( Z_CNTL, 0 ); - outf( SCALE_3D_CNTL, 0 ); - - ATIMach64WaitForFIFO(pATI, 2); - outf( SC_LEFT_RIGHT, - SetWord(pATIHW->sc_right, 1) | SetWord(pATIHW->sc_left, 0) ); - outf( SC_TOP_BOTTOM, - SetWord(pATIHW->sc_bottom, 1) | SetWord(pATIHW->sc_top, 0) ); - - if (pATI->OptionMMIOCache) { - /* Now that the cache slots reflect the register state, re-enable MMIO cache */ - CacheRegister(SRC_CNTL); - CacheRegister(HOST_CNTL); - CacheRegister(PAT_CNTL); - CacheRegister(SC_LEFT_RIGHT); - CacheRegister(SC_TOP_BOTTOM); - CacheRegister(DP_BKGD_CLR); - CacheRegister(DP_FRGD_CLR); - CacheRegister(DP_WRITE_MASK); - CacheRegister(DP_MIX); - CacheRegister(CLR_CMP_CNTL); - } - - ATIMach64WaitForIdle(pATI); - - if (pATI->OptionMMIOCache && pATI->OptionTestMMIOCache) { - - /* Only check registers we didn't restore */ - TestRegisterCaching(PAT_REG0); - TestRegisterCaching(PAT_REG1); - - TestRegisterCaching(CLR_CMP_CLR); - TestRegisterCaching(CLR_CMP_MSK); - - if (pATI->Block1Base) - { - TestRegisterCaching(OVERLAY_Y_X_START); - TestRegisterCaching(OVERLAY_Y_X_END); - - TestRegisterCaching(OVERLAY_GRAPHICS_KEY_CLR); - TestRegisterCaching(OVERLAY_GRAPHICS_KEY_MSK); - - TestRegisterCaching(OVERLAY_KEY_CNTL); - - TestRegisterCaching(OVERLAY_SCALE_INC); - TestRegisterCaching(OVERLAY_SCALE_CNTL); - - TestRegisterCaching(SCALER_HEIGHT_WIDTH); - - TestRegisterCaching(SCALER_TEST); - - TestRegisterCaching(VIDEO_FORMAT); - - if (pATI->Chip < ATI_CHIP_264VTB) - { - TestRegisterCaching(BUF0_OFFSET); - TestRegisterCaching(BUF0_PITCH); - TestRegisterCaching(BUF1_OFFSET); - TestRegisterCaching(BUF1_PITCH); - } - else - { - TestRegisterCaching(SCALER_BUF0_OFFSET); - TestRegisterCaching(SCALER_BUF1_OFFSET); - TestRegisterCaching(SCALER_BUF_PITCH); - - TestRegisterCaching(OVERLAY_EXCLUSIVE_HORZ); - TestRegisterCaching(OVERLAY_EXCLUSIVE_VERT); - - if (pATI->Chip >= ATI_CHIP_264GTPRO) - { - TestRegisterCaching(SCALER_COLOUR_CNTL); - - TestRegisterCaching(SCALER_H_COEFF0); - TestRegisterCaching(SCALER_H_COEFF1); - TestRegisterCaching(SCALER_H_COEFF2); - TestRegisterCaching(SCALER_H_COEFF3); - TestRegisterCaching(SCALER_H_COEFF4); - - TestRegisterCaching(SCALER_BUF0_OFFSET_U); - TestRegisterCaching(SCALER_BUF0_OFFSET_V); - TestRegisterCaching(SCALER_BUF1_OFFSET_U); - TestRegisterCaching(SCALER_BUF1_OFFSET_V); - } - } - } - } - pATI->NeedDRISync = FALSE; - - } - else - -#endif /* XF86DRI */ - { - ATIMach64WaitForIdle(pATI); - - if (pATI->OptionMMIOCache && pATI->OptionTestMMIOCache) - { - /* - * For debugging purposes, attempt to verify that each cached register - * should actually be cached. - */ - TestRegisterCaching(SRC_CNTL); - - TestRegisterCaching(HOST_CNTL); - - TestRegisterCaching(PAT_REG0); - TestRegisterCaching(PAT_REG1); - TestRegisterCaching(PAT_CNTL); - - if (RegisterIsCached(SC_LEFT_RIGHT) && /* Special case */ - (CacheSlot(SC_LEFT_RIGHT) != - (SetWord(inm(SC_RIGHT), 1) | SetWord(inm(SC_LEFT), 0)))) - { - UncacheRegister(SC_LEFT_RIGHT); - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "SC_LEFT_RIGHT write cache disabled!\n"); - } - - if (RegisterIsCached(SC_TOP_BOTTOM) && /* Special case */ - (CacheSlot(SC_TOP_BOTTOM) != - (SetWord(inm(SC_BOTTOM), 1) | SetWord(inm(SC_TOP), 0)))) - { - UncacheRegister(SC_TOP_BOTTOM); - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "SC_TOP_BOTTOM write cache disabled!\n"); - } - - TestRegisterCaching(DP_BKGD_CLR); - TestRegisterCaching(DP_FRGD_CLR); - TestRegisterCaching(DP_WRITE_MASK); - TestRegisterCaching(DP_MIX); - - TestRegisterCaching(CLR_CMP_CLR); - TestRegisterCaching(CLR_CMP_MSK); - TestRegisterCaching(CLR_CMP_CNTL); - - if (pATI->Block1Base) - { - TestRegisterCaching(OVERLAY_Y_X_START); - TestRegisterCaching(OVERLAY_Y_X_END); - - TestRegisterCaching(OVERLAY_GRAPHICS_KEY_CLR); - TestRegisterCaching(OVERLAY_GRAPHICS_KEY_MSK); - - TestRegisterCaching(OVERLAY_KEY_CNTL); - - TestRegisterCaching(OVERLAY_SCALE_INC); - TestRegisterCaching(OVERLAY_SCALE_CNTL); - - TestRegisterCaching(SCALER_HEIGHT_WIDTH); - - TestRegisterCaching(SCALER_TEST); - - TestRegisterCaching(VIDEO_FORMAT); - - if (pATI->Chip < ATI_CHIP_264VTB) - { - TestRegisterCaching(BUF0_OFFSET); - TestRegisterCaching(BUF0_PITCH); - TestRegisterCaching(BUF1_OFFSET); - TestRegisterCaching(BUF1_PITCH); - } - else - { - TestRegisterCaching(SCALER_BUF0_OFFSET); - TestRegisterCaching(SCALER_BUF1_OFFSET); - TestRegisterCaching(SCALER_BUF_PITCH); - - TestRegisterCaching(OVERLAY_EXCLUSIVE_HORZ); - TestRegisterCaching(OVERLAY_EXCLUSIVE_VERT); - - if (pATI->Chip >= ATI_CHIP_264GTPRO) - { - TestRegisterCaching(SCALER_COLOUR_CNTL); - - TestRegisterCaching(SCALER_H_COEFF0); - TestRegisterCaching(SCALER_H_COEFF1); - TestRegisterCaching(SCALER_H_COEFF2); - TestRegisterCaching(SCALER_H_COEFF3); - TestRegisterCaching(SCALER_H_COEFF4); - - TestRegisterCaching(SCALER_BUF0_OFFSET_U); - TestRegisterCaching(SCALER_BUF0_OFFSET_V); - TestRegisterCaching(SCALER_BUF1_OFFSET_U); - TestRegisterCaching(SCALER_BUF1_OFFSET_V); - } - } - } - } - } - - /* - * For VTB's and later, the first CPU read of the framebuffer will return - * zeroes, so do it here. This appears to be due to some kind of engine - * caching of framebuffer data I haven't found any way of disabling, or - * otherwise circumventing. Thanks to Mark Vojkovich for the suggestion. - */ - if (pATI->pXAAInfo) - pATI->pXAAInfo->NeedToSync = FALSE; - - pATI = *(volatile ATIPtr *)pATI->pMemory; -} - -/* - * ATIMach64SetupForScreenToScreenCopy -- - * - * This function sets up the draw engine for a series of screen-to-screen copy - * operations. - */ -static void -ATIMach64SetupForScreenToScreenCopy -( - ScrnInfoPtr pScreenInfo, - int xdir, - int ydir, - int rop, - unsigned int planemask, - int TransparencyColour -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 3); - outf(DP_WRITE_MASK, planemask); - outf(DP_SRC, DP_MONO_SRC_ALLONES | - SetBits(SRC_BLIT, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC)); - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX)); - -#ifdef AVOID_DGA - - if (TransparencyColour == -1) - -#else /* AVOID_DGA */ - - if (!pATI->XAAForceTransBlit && (TransparencyColour == -1)) - -#endif /* AVOID_DGA */ - - { - outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE); - } - else - { - ATIMach64WaitForFIFO(pATI, 2); - outf(CLR_CMP_CLR, TransparencyColour); - outf(CLR_CMP_CNTL, CLR_CMP_FN_EQUAL | CLR_CMP_SRC_2D); - } - - pATI->dst_cntl = 0; - - if (ydir > 0) - pATI->dst_cntl |= DST_Y_DIR; - if (xdir > 0) - pATI->dst_cntl |= DST_X_DIR; - - if (pATI->XModifier == 1) - outf(DST_CNTL, pATI->dst_cntl); - else - pATI->dst_cntl |= DST_24_ROT_EN; -} - -/* - * ATIMach64SubsequentScreenToScreenCopy -- - * - * This function performs a screen-to-screen copy operation. - */ -static void -ATIMach64SubsequentScreenToScreenCopy -( - ScrnInfoPtr pScreenInfo, - int xSrc, - int ySrc, - int xDst, - int yDst, - int w, - int h -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - xSrc *= pATI->XModifier; - xDst *= pATI->XModifier; - w *= pATI->XModifier; - - ATIDRISync(pScreenInfo); - - /* Disable clipping if it gets in the way */ - ATIMach64ValidateClip(pATI, xDst, xDst + w - 1, yDst, yDst + h - 1); - - if (!(pATI->dst_cntl & DST_X_DIR)) - { - xSrc += w - 1; - xDst += w - 1; - } - - if (!(pATI->dst_cntl & DST_Y_DIR)) - { - ySrc += h - 1; - yDst += h - 1; - } - - if (pATI->XModifier != 1) - outf(DST_CNTL, pATI->dst_cntl | SetBits((xDst / 4) % 6, DST_24_ROT)); - - ATIMach64WaitForFIFO(pATI, 4); - outf(SRC_Y_X, SetWord(xSrc, 1) | SetWord(ySrc, 0)); - outf(SRC_WIDTH1, w); - outf(DST_Y_X, SetWord(xDst, 1) | SetWord(yDst, 0)); - outf(DST_HEIGHT_WIDTH, SetWord(w, 1) | SetWord(h, 0)); -} - -/* - * ATIMach64SetupForSolidFill -- - * - * This function sets up the draw engine for a series of solid fills. - */ -static void -ATIMach64SetupForSolidFill -( - ScrnInfoPtr pScreenInfo, - int colour, - int rop, - unsigned int planemask -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 5); - outf(DP_WRITE_MASK, planemask); - outf(DP_SRC, DP_MONO_SRC_ALLONES | - SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC)); - outf(DP_FRGD_CLR, colour); - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX)); - - outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE); - - if (pATI->XModifier == 1) - outf(DST_CNTL, DST_X_DIR | DST_Y_DIR); -} - -/* - * ATIMach64SubsequentSolidFillRect -- - * - * This function performs a solid rectangle fill. - */ -static void -ATIMach64SubsequentSolidFillRect -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int w, - int h -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - if (pATI->XModifier != 1) - { - x *= pATI->XModifier; - w *= pATI->XModifier; - - outf(DST_CNTL, SetBits((x / 4) % 6, DST_24_ROT) | - (DST_X_DIR | DST_Y_DIR | DST_24_ROT_EN)); - } - - /* Disable clipping if it gets in the way */ - ATIMach64ValidateClip(pATI, x, x + w - 1, y, y + h - 1); - - ATIMach64WaitForFIFO(pATI, 2); - outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0)); - outf(DST_HEIGHT_WIDTH, SetWord(w, 1) | SetWord(h, 0)); -} - -/* - * ATIMach64SetupForSolidLine -- - * - * This function sets up the draw engine for a series of solid lines. It is - * not used for 24bpp because the engine doesn't support it. - */ -static void -ATIMach64SetupForSolidLine -( - ScrnInfoPtr pScreenInfo, - int colour, - int rop, - unsigned int planemask -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 5); - outf(DP_WRITE_MASK, planemask); - outf(DP_SRC, DP_MONO_SRC_ALLONES | - SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC)); - outf(DP_FRGD_CLR, colour); - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX)); - - outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE); - - ATIMach64ValidateClip(pATI, pATI->NewHW.sc_left, pATI->NewHW.sc_right, - pATI->NewHW.sc_top, pATI->NewHW.sc_bottom); -} - -/* - * ATIMach64SubsequentSolidHorVertLine -- - * - * This is called to draw a solid horizontal or vertical line. This does a - * one-pixel wide solid fill. - */ -static void -ATIMach64SubsequentSolidHorVertLine -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int len, - int dir -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 3); - outf(DST_CNTL, DST_X_DIR | DST_Y_DIR); - outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0)); - - if (dir == DEGREES_0) - outf(DST_HEIGHT_WIDTH, SetWord(len, 1) | SetWord(1, 0)); - else /* if (dir == DEGREES_270) */ - outf(DST_HEIGHT_WIDTH, SetWord(1, 1) | SetWord(len, 0)); -} - -/* - * ATIMach64SubsequentSolidBresenhamLine -- - * - * This function draws a line using the Bresenham line engine. - */ -static void -ATIMach64SubsequentSolidBresenhamLine -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int major, - int minor, - int err, - int len, - int octant -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - CARD32 dst_cntl = DST_LAST_PEL; - - if (octant & YMAJOR) - dst_cntl |= DST_Y_MAJOR; - - if (!(octant & XDECREASING)) - dst_cntl |= DST_X_DIR; - - if (!(octant & YDECREASING)) - dst_cntl |= DST_Y_DIR; - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 6); - outf(DST_CNTL, dst_cntl); - outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0)); - outf(DST_BRES_ERR, minor + err); - outf(DST_BRES_INC, minor); - outf(DST_BRES_DEC, minor - major); - outf(DST_BRES_LNTH, len); -} - -/* - * ATIMach64SetupForMono8x8PatternFill -- - * - * This function sets up the draw engine for a series of 8x8 1bpp pattern - * fills. - */ -static void -ATIMach64SetupForMono8x8PatternFill -( - ScrnInfoPtr pScreenInfo, - int patx, - int paty, - int fg, - int bg, - int rop, - unsigned int planemask -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 3); - outf(DP_WRITE_MASK, planemask); - outf(DP_SRC, DP_MONO_SRC_PATTERN | - SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC)); - outf(DP_FRGD_CLR, fg); - - if (bg == -1) - { - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) | - SetBits(MIX_DST, DP_BKGD_MIX)); - } - else - { - ATIMach64WaitForFIFO(pATI, 2); - outf(DP_BKGD_CLR, bg); - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) | - SetBits(ATIMach64ALU[rop], DP_BKGD_MIX)); - } - - ATIMach64WaitForFIFO(pATI, 4); - outf(PAT_REG0, patx); - outf(PAT_REG1, paty); - outf(PAT_CNTL, PAT_MONO_EN); - - outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE); - - if (pATI->XModifier == 1) - outf(DST_CNTL, DST_X_DIR | DST_Y_DIR); -} - -/* - * ATIMach64SubsequentMono8x8PatternFillRect -- - * - * This function performs an 8x8 1bpp pattern fill. - */ -static void -ATIMach64SubsequentMono8x8PatternFillRect -( - ScrnInfoPtr pScreenInfo, - int patx, - int paty, - int x, - int y, - int w, - int h -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - if (pATI->XModifier != 1) - { - x *= pATI->XModifier; - w *= pATI->XModifier; - - outf(DST_CNTL, SetBits((x / 4) % 6, DST_24_ROT) | - (DST_X_DIR | DST_Y_DIR | DST_24_ROT_EN)); - } - - /* Disable clipping if it gets in the way */ - ATIMach64ValidateClip(pATI, x, x + w - 1, y, y + h - 1); - - ATIMach64WaitForFIFO(pATI, 2); - outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0)); - outf(DST_HEIGHT_WIDTH, SetWord(w, 1) | SetWord(h, 0)); -} - -/* - * ATIMach64SetupForScanlineCPUToScreenColorExpandFill -- - * - * This function sets up the engine for a series of colour expansion fills. - */ -static void -ATIMach64SetupForScanlineCPUToScreenColorExpandFill -( - ScrnInfoPtr pScreenInfo, - int fg, - int bg, - int rop, - unsigned int planemask -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 3); - outf(DP_WRITE_MASK, planemask); - outf(DP_SRC, DP_MONO_SRC_HOST | - SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC)); - outf(DP_FRGD_CLR, fg); - - if (bg == -1) - { - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) | - SetBits(MIX_DST, DP_BKGD_MIX)); - } - else - { - ATIMach64WaitForFIFO(pATI, 2); - outf(DP_BKGD_CLR, bg); - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) | - SetBits(ATIMach64ALU[rop], DP_BKGD_MIX)); - } - - outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE); - - if (pATI->XModifier == 1) - outf(DST_CNTL, DST_X_DIR | DST_Y_DIR); -} - -/* - * ATIMach64SubsequentScanlineCPUToScreenColorExpandFill -- - * - * This function sets up the engine for a single colour expansion fill. - */ -static void -ATIMach64SubsequentScanlineCPUToScreenColorExpandFill -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int w, - int h, - int skipleft -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - if (pATI->XModifier != 1) - { - x *= pATI->XModifier; - w *= pATI->XModifier; - skipleft *= pATI->XModifier; - - outf(DST_CNTL, SetBits((x / 4) % 6, DST_24_ROT) | - (DST_X_DIR | DST_Y_DIR | DST_24_ROT_EN)); - } - - pATI->ExpansionBitmapWidth = (w + 31) / 32; - - ATIMach64WaitForFIFO(pATI, 3); - pATI->sc_left = x + skipleft; - pATI->sc_right = x + w - 1; - outf(SC_LEFT_RIGHT, - SetWord(pATI->sc_right, 1) | SetWord(pATI->sc_left, 0)); - outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0)); - outf(DST_HEIGHT_WIDTH, - SetWord(pATI->ExpansionBitmapWidth * 32, 1) | SetWord(h, 0)); -} - -/* - * ATIMach64SubsequentColorExpandScanline -- - * - * This function feeds a bitmap scanline to the engine for a colour expansion - * fill. This is written to do burst transfers for those platforms that can do - * them, and to improve CPU/engine concurrency. - */ -static void -ATIMach64SubsequentColorExpandScanline -( - ScrnInfoPtr pScreenInfo, - int iBuffer -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - CARD32 *pBitmapData = pATI->ExpansionBitmapScanlinePtr[iBuffer]; - int w = pATI->ExpansionBitmapWidth; - int nDWord; - - ATIDRISync(pScreenInfo); - - while (w > 0) - { - /* - * Transfers are done in chunks of up to 64 bytes in length (32 on - * earlier controllers). - */ - nDWord = w; - if (nDWord > pATI->nHostFIFOEntries) - nDWord = pATI->nHostFIFOEntries; - - /* Make enough FIFO slots available */ - ATIMach64WaitForFIFO(pATI, nDWord); - - /* - * Always start transfers on a chuck-sized boundary. Note that - * HOST_DATA_0 is actually on a 512-byte boundary, but *pBitmapData can - * only be guaranteed to be on a chunk-sized boundary. - * - * Transfer current chunk. With any luck, the compiler won't mangle - * this too badly... - */ - -# if defined(ATIMove32) - - { - ATIMove32(pATI->pHOST_DATA, pBitmapData, nDWord); - } - -# else - - { - volatile CARD32 *pDst; - CARD32 *pSrc; - unsigned int iDWord; - - iDWord = 16 - nDWord; - pDst = (volatile CARD32 *)pATI->pHOST_DATA - iDWord; - pSrc = pBitmapData - iDWord; - - switch (iDWord) - { - case 0: MMIO_MOVE32(pDst + 0, 0, *(pSrc + 0)); - case 1: MMIO_MOVE32(pDst + 1, 0, *(pSrc + 1)); - case 2: MMIO_MOVE32(pDst + 2, 0, *(pSrc + 2)); - case 3: MMIO_MOVE32(pDst + 3, 0, *(pSrc + 3)); - case 4: MMIO_MOVE32(pDst + 4, 0, *(pSrc + 4)); - case 5: MMIO_MOVE32(pDst + 5, 0, *(pSrc + 5)); - case 6: MMIO_MOVE32(pDst + 6, 0, *(pSrc + 6)); - case 7: MMIO_MOVE32(pDst + 7, 0, *(pSrc + 7)); - case 8: MMIO_MOVE32(pDst + 8, 0, *(pSrc + 8)); - case 9: MMIO_MOVE32(pDst + 9, 0, *(pSrc + 9)); - case 10: MMIO_MOVE32(pDst + 10, 0, *(pSrc + 10)); - case 11: MMIO_MOVE32(pDst + 11, 0, *(pSrc + 11)); - case 12: MMIO_MOVE32(pDst + 12, 0, *(pSrc + 12)); - case 13: MMIO_MOVE32(pDst + 13, 0, *(pSrc + 13)); - case 14: MMIO_MOVE32(pDst + 14, 0, *(pSrc + 14)); - case 15: MMIO_MOVE32(pDst + 15, 0, *(pSrc + 15)); - - default: /* Muffle compiler */ - break; - } - } - -# endif - - /* Step to next chunk */ - pBitmapData += nDWord; - w -= nDWord; - pATI->nAvailableFIFOEntries -= nDWord; - } - - pATI->EngineIsBusy = TRUE; -} - -/* - * ATIMach64AccelInit -- - * - * This function fills in structure fields needed for acceleration on Mach64 - * variants. - */ -int -ATIMach64AccelInit -( - ATIPtr pATI, - XAAInfoRecPtr pXAAInfo -) -{ - /* This doesn't seem quite right... */ - if (pATI->XModifier == 1) - { - pXAAInfo->Flags = PIXMAP_CACHE | OFFSCREEN_PIXMAPS; - -#ifndef AVOID_CPIO - - if (!pATI->BankInfo.BankSize) - -#endif /* AVOID_CPIO */ - - { - pXAAInfo->Flags |= LINEAR_FRAMEBUFFER; - } - } - - /* Sync */ - pXAAInfo->Sync = ATIMach64Sync; - - /* Screen-to-screen copy */ - pXAAInfo->SetupForScreenToScreenCopy = ATIMach64SetupForScreenToScreenCopy; - pXAAInfo->SubsequentScreenToScreenCopy = - ATIMach64SubsequentScreenToScreenCopy; - - /* Solid fills */ - pXAAInfo->SetupForSolidFill = ATIMach64SetupForSolidFill; - pXAAInfo->SubsequentSolidFillRect = ATIMach64SubsequentSolidFillRect; - - /* 8x8 mono pattern fills */ - pXAAInfo->Mono8x8PatternFillFlags = - -#if X_BYTE_ORDER != X_LITTLE_ENDIAN - - BIT_ORDER_IN_BYTE_MSBFIRST | - -#endif /* X_BYTE_ORDER */ - - HARDWARE_PATTERN_PROGRAMMED_BITS | HARDWARE_PATTERN_SCREEN_ORIGIN; - pXAAInfo->SetupForMono8x8PatternFill = ATIMach64SetupForMono8x8PatternFill; - pXAAInfo->SubsequentMono8x8PatternFillRect = - ATIMach64SubsequentMono8x8PatternFillRect; - - /* - * Use scanline version of colour expansion, not only for the non-ix86 - * case, but also to avoid PCI retries. - */ - pXAAInfo->ScanlineCPUToScreenColorExpandFillFlags = - LEFT_EDGE_CLIPPING | LEFT_EDGE_CLIPPING_NEGATIVE_X | - CPU_TRANSFER_PAD_DWORD | SCANLINE_PAD_DWORD; - if (pATI->XModifier != 1) - pXAAInfo->ScanlineCPUToScreenColorExpandFillFlags |= TRIPLE_BITS_24BPP; - pXAAInfo->NumScanlineColorExpandBuffers = 1; - - /* Align bitmap data on a 64-byte boundary */ - pATI->ExpansionBitmapWidth = /* DWord size in bits */ - ((pATI->displayWidth * pATI->XModifier) + 31) & ~31U; - pATI->ExpansionBitmapScanlinePtr[1] = - (CARD32 *)xnfalloc((pATI->ExpansionBitmapWidth >> 3) + 63); - pATI->ExpansionBitmapScanlinePtr[0] = - (pointer)(((unsigned long)pATI->ExpansionBitmapScanlinePtr[1] + 63) & - ~63UL); - pXAAInfo->ScanlineColorExpandBuffers = - (CARD8 **)pATI->ExpansionBitmapScanlinePtr; - pXAAInfo->SetupForScanlineCPUToScreenColorExpandFill = - ATIMach64SetupForScanlineCPUToScreenColorExpandFill; - pXAAInfo->SubsequentScanlineCPUToScreenColorExpandFill = - ATIMach64SubsequentScanlineCPUToScreenColorExpandFill; - pXAAInfo->SubsequentColorExpandScanline = - ATIMach64SubsequentColorExpandScanline; - - /* The engine does not support the following primitives for 24bpp */ - if (pATI->XModifier != 1) - return ATIMach64MaxY; - - /* Solid lines */ - pXAAInfo->SetupForSolidLine = ATIMach64SetupForSolidLine; - pXAAInfo->SubsequentSolidHorVertLine = ATIMach64SubsequentSolidHorVertLine; - pXAAInfo->SubsequentSolidBresenhamLine = - ATIMach64SubsequentSolidBresenhamLine; - - return ATIMach64MaxY; -} diff --git a/src/atimach64accel.h b/src/atimach64accel.h deleted file mode 100644 index 88f90a05..00000000 --- a/src/atimach64accel.h +++ /dev/null @@ -1,38 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64accel.h,v 1.1 2003/04/23 21:51:29 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIMACH64ACCEL_H___ -#define ___ATIMACH64ACCEL_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xaa.h" - -#define ATIMach64MaxX 8191 -#define ATIMach64MaxY 32767 - -extern int ATIMach64AccelInit FunctionPrototype((ATIPtr, XAAInfoRecPtr)); -extern void ATIMach64Sync FunctionPrototype((ScrnInfoPtr)); - -#endif /* ___ATIMACH64ACCEL_H___ */ diff --git a/src/atimach64cursor.c b/src/atimach64cursor.c deleted file mode 100644 index 6b55d423..00000000 --- a/src/atimach64cursor.c +++ /dev/null @@ -1,413 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64cursor.c,v 1.1 2003/04/23 21:51:29 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "aticrtc.h" -#include "atimach64accel.h" -#include "atimach64cursor.h" -#include "atimach64io.h" - -/* - * ATIMach64SetCursorColours -- - * - * Set hardware cursor foreground and background colours. - */ -static void -ATIMach64SetCursorColours -( - ScrnInfoPtr pScreenInfo, - int fg, - int bg -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - outr(CUR_CLR0, SetBits(fg, CUR_CLR)); - outr(CUR_CLR1, SetBits(bg, CUR_CLR)); -} - -/* - * ATIMach64SetCursorPosition -- - * - * Set position of hardware cursor. - */ -static void -ATIMach64SetCursorPosition -( - ScrnInfoPtr pScreenInfo, - int x, - int y -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - CARD16 CursorXOffset, CursorYOffset; - - /* Adjust x & y when the cursor is partially obscured */ - if (x < 0) - { - if ((CursorXOffset = -x) > 63) - CursorXOffset = 63; - x = 0; - } - else - { - CursorXOffset = pScreenInfo->frameX1 - pScreenInfo->frameX0; - if (x > CursorXOffset) - x = CursorXOffset; - CursorXOffset = 0; - } - - if (y < 0) - { - if ((CursorYOffset = -y) > 63) - CursorYOffset = 63; - y = 0; - } - else - { - CursorYOffset = pScreenInfo->frameY1 - pScreenInfo->frameY0; - if (y > CursorYOffset) - y = CursorYOffset; - CursorYOffset = 0; - } - - /* Adjust for multiscanned modes */ - if (pScreenInfo->currentMode->Flags & V_DBLSCAN) - y *= 2; - if (pScreenInfo->currentMode->VScan > 1) - y *= pScreenInfo->currentMode->VScan; - - do - { - if (CursorYOffset != pATI->CursorYOffset) - { - pATI->CursorYOffset = CursorYOffset; - outr(CUR_OFFSET, ((CursorYOffset << 4) + pATI->CursorOffset) >> 3); - } - else if (CursorXOffset == pATI->CursorXOffset) - break; - - pATI->CursorXOffset = CursorXOffset; - outr(CUR_HORZ_VERT_OFF, SetBits(CursorXOffset, CUR_HORZ_OFF) | - SetBits(CursorYOffset, CUR_VERT_OFF)); - } while (0); - - outr(CUR_HORZ_VERT_POSN, - SetBits(x, CUR_HORZ_POSN) | SetBits(y, CUR_VERT_POSN)); -} - -/* - * ATIMach64LoadCursorImage -- - * - * Copy hardware cursor image into offscreen video memory. - */ -static void -ATIMach64LoadCursorImage -( - ScrnInfoPtr pScreenInfo, - CARD8 *pImage -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - CARD32 *pSrc = (pointer)pImage; - volatile CARD32 *pDst = pATI->pCursorImage; - -#ifdef XF86DRI - - /* XAA Sync requires the DRM lock if DRI enabled */ - ATIDRILock(pScreenInfo); - -#endif /* XF86DRI */ - - /* Synchronise video memory accesses */ - ATIMach64Sync(pScreenInfo); - -# if defined(ATIMove32) - - { - ATIMove32(pDst, pSrc, 256); - } - -# else - - { - /* This is lengthy, but it does maximise burst modes */ - pDst[ 0] = pSrc[ 0]; pDst[ 1] = pSrc[ 1]; - pDst[ 2] = pSrc[ 2]; pDst[ 3] = pSrc[ 3]; - pDst[ 4] = pSrc[ 4]; pDst[ 5] = pSrc[ 5]; - pDst[ 6] = pSrc[ 6]; pDst[ 7] = pSrc[ 7]; - pDst[ 8] = pSrc[ 8]; pDst[ 9] = pSrc[ 9]; - pDst[ 10] = pSrc[ 10]; pDst[ 11] = pSrc[ 11]; - pDst[ 12] = pSrc[ 12]; pDst[ 13] = pSrc[ 13]; - pDst[ 14] = pSrc[ 14]; pDst[ 15] = pSrc[ 15]; - pDst[ 16] = pSrc[ 16]; pDst[ 17] = pSrc[ 17]; - pDst[ 18] = pSrc[ 18]; pDst[ 19] = pSrc[ 19]; - pDst[ 20] = pSrc[ 20]; pDst[ 21] = pSrc[ 21]; - pDst[ 22] = pSrc[ 22]; pDst[ 23] = pSrc[ 23]; - pDst[ 24] = pSrc[ 24]; pDst[ 25] = pSrc[ 25]; - pDst[ 26] = pSrc[ 26]; pDst[ 27] = pSrc[ 27]; - pDst[ 28] = pSrc[ 28]; pDst[ 29] = pSrc[ 29]; - pDst[ 30] = pSrc[ 30]; pDst[ 31] = pSrc[ 31]; - pDst[ 32] = pSrc[ 32]; pDst[ 33] = pSrc[ 33]; - pDst[ 34] = pSrc[ 34]; pDst[ 35] = pSrc[ 35]; - pDst[ 36] = pSrc[ 36]; pDst[ 37] = pSrc[ 37]; - pDst[ 38] = pSrc[ 38]; pDst[ 39] = pSrc[ 39]; - pDst[ 40] = pSrc[ 40]; pDst[ 41] = pSrc[ 41]; - pDst[ 42] = pSrc[ 42]; pDst[ 43] = pSrc[ 43]; - pDst[ 44] = pSrc[ 44]; pDst[ 45] = pSrc[ 45]; - pDst[ 46] = pSrc[ 46]; pDst[ 47] = pSrc[ 47]; - pDst[ 48] = pSrc[ 48]; pDst[ 49] = pSrc[ 49]; - pDst[ 50] = pSrc[ 50]; pDst[ 51] = pSrc[ 51]; - pDst[ 52] = pSrc[ 52]; pDst[ 53] = pSrc[ 53]; - pDst[ 54] = pSrc[ 54]; pDst[ 55] = pSrc[ 55]; - pDst[ 56] = pSrc[ 56]; pDst[ 57] = pSrc[ 57]; - pDst[ 58] = pSrc[ 58]; pDst[ 59] = pSrc[ 59]; - pDst[ 60] = pSrc[ 60]; pDst[ 61] = pSrc[ 61]; - pDst[ 62] = pSrc[ 62]; pDst[ 63] = pSrc[ 63]; - pDst[ 64] = pSrc[ 64]; pDst[ 65] = pSrc[ 65]; - pDst[ 66] = pSrc[ 66]; pDst[ 67] = pSrc[ 67]; - pDst[ 68] = pSrc[ 68]; pDst[ 69] = pSrc[ 69]; - pDst[ 70] = pSrc[ 70]; pDst[ 71] = pSrc[ 71]; - pDst[ 72] = pSrc[ 72]; pDst[ 73] = pSrc[ 73]; - pDst[ 74] = pSrc[ 74]; pDst[ 75] = pSrc[ 75]; - pDst[ 76] = pSrc[ 76]; pDst[ 77] = pSrc[ 77]; - pDst[ 78] = pSrc[ 78]; pDst[ 79] = pSrc[ 79]; - pDst[ 80] = pSrc[ 80]; pDst[ 81] = pSrc[ 81]; - pDst[ 82] = pSrc[ 82]; pDst[ 83] = pSrc[ 83]; - pDst[ 84] = pSrc[ 84]; pDst[ 85] = pSrc[ 85]; - pDst[ 86] = pSrc[ 86]; pDst[ 87] = pSrc[ 87]; - pDst[ 88] = pSrc[ 88]; pDst[ 89] = pSrc[ 89]; - pDst[ 90] = pSrc[ 90]; pDst[ 91] = pSrc[ 91]; - pDst[ 92] = pSrc[ 92]; pDst[ 93] = pSrc[ 93]; - pDst[ 94] = pSrc[ 94]; pDst[ 95] = pSrc[ 95]; - pDst[ 96] = pSrc[ 96]; pDst[ 97] = pSrc[ 97]; - pDst[ 98] = pSrc[ 98]; pDst[ 99] = pSrc[ 99]; - pDst[100] = pSrc[100]; pDst[101] = pSrc[101]; - pDst[102] = pSrc[102]; pDst[103] = pSrc[103]; - pDst[104] = pSrc[104]; pDst[105] = pSrc[105]; - pDst[106] = pSrc[106]; pDst[107] = pSrc[107]; - pDst[108] = pSrc[108]; pDst[109] = pSrc[109]; - pDst[110] = pSrc[110]; pDst[111] = pSrc[111]; - pDst[112] = pSrc[112]; pDst[113] = pSrc[113]; - pDst[114] = pSrc[114]; pDst[115] = pSrc[115]; - pDst[116] = pSrc[116]; pDst[117] = pSrc[117]; - pDst[118] = pSrc[118]; pDst[119] = pSrc[119]; - pDst[120] = pSrc[120]; pDst[121] = pSrc[121]; - pDst[122] = pSrc[122]; pDst[123] = pSrc[123]; - pDst[124] = pSrc[124]; pDst[125] = pSrc[125]; - pDst[126] = pSrc[126]; pDst[127] = pSrc[127]; - pDst[128] = pSrc[128]; pDst[129] = pSrc[129]; - pDst[130] = pSrc[130]; pDst[131] = pSrc[131]; - pDst[132] = pSrc[132]; pDst[133] = pSrc[133]; - pDst[134] = pSrc[134]; pDst[135] = pSrc[135]; - pDst[136] = pSrc[136]; pDst[137] = pSrc[137]; - pDst[138] = pSrc[138]; pDst[139] = pSrc[139]; - pDst[140] = pSrc[140]; pDst[141] = pSrc[141]; - pDst[142] = pSrc[142]; pDst[143] = pSrc[143]; - pDst[144] = pSrc[144]; pDst[145] = pSrc[145]; - pDst[146] = pSrc[146]; pDst[147] = pSrc[147]; - pDst[148] = pSrc[148]; pDst[149] = pSrc[149]; - pDst[150] = pSrc[150]; pDst[151] = pSrc[151]; - pDst[152] = pSrc[152]; pDst[153] = pSrc[153]; - pDst[154] = pSrc[154]; pDst[155] = pSrc[155]; - pDst[156] = pSrc[156]; pDst[157] = pSrc[157]; - pDst[158] = pSrc[158]; pDst[159] = pSrc[159]; - pDst[160] = pSrc[160]; pDst[161] = pSrc[161]; - pDst[162] = pSrc[162]; pDst[163] = pSrc[163]; - pDst[164] = pSrc[164]; pDst[165] = pSrc[165]; - pDst[166] = pSrc[166]; pDst[167] = pSrc[167]; - pDst[168] = pSrc[168]; pDst[169] = pSrc[169]; - pDst[170] = pSrc[170]; pDst[171] = pSrc[171]; - pDst[172] = pSrc[172]; pDst[173] = pSrc[173]; - pDst[174] = pSrc[174]; pDst[175] = pSrc[175]; - pDst[176] = pSrc[176]; pDst[177] = pSrc[177]; - pDst[178] = pSrc[178]; pDst[179] = pSrc[179]; - pDst[180] = pSrc[180]; pDst[181] = pSrc[181]; - pDst[182] = pSrc[182]; pDst[183] = pSrc[183]; - pDst[184] = pSrc[184]; pDst[185] = pSrc[185]; - pDst[186] = pSrc[186]; pDst[187] = pSrc[187]; - pDst[188] = pSrc[188]; pDst[189] = pSrc[189]; - pDst[190] = pSrc[190]; pDst[191] = pSrc[191]; - pDst[192] = pSrc[192]; pDst[193] = pSrc[193]; - pDst[194] = pSrc[194]; pDst[195] = pSrc[195]; - pDst[196] = pSrc[196]; pDst[197] = pSrc[197]; - pDst[198] = pSrc[198]; pDst[199] = pSrc[199]; - pDst[200] = pSrc[200]; pDst[201] = pSrc[201]; - pDst[202] = pSrc[202]; pDst[203] = pSrc[203]; - pDst[204] = pSrc[204]; pDst[205] = pSrc[205]; - pDst[206] = pSrc[206]; pDst[207] = pSrc[207]; - pDst[208] = pSrc[208]; pDst[209] = pSrc[209]; - pDst[210] = pSrc[210]; pDst[211] = pSrc[211]; - pDst[212] = pSrc[212]; pDst[213] = pSrc[213]; - pDst[214] = pSrc[214]; pDst[215] = pSrc[215]; - pDst[216] = pSrc[216]; pDst[217] = pSrc[217]; - pDst[218] = pSrc[218]; pDst[219] = pSrc[219]; - pDst[220] = pSrc[220]; pDst[221] = pSrc[221]; - pDst[222] = pSrc[222]; pDst[223] = pSrc[223]; - pDst[224] = pSrc[224]; pDst[225] = pSrc[225]; - pDst[226] = pSrc[226]; pDst[227] = pSrc[227]; - pDst[228] = pSrc[228]; pDst[229] = pSrc[229]; - pDst[230] = pSrc[230]; pDst[231] = pSrc[231]; - pDst[232] = pSrc[232]; pDst[233] = pSrc[233]; - pDst[234] = pSrc[234]; pDst[235] = pSrc[235]; - pDst[236] = pSrc[236]; pDst[237] = pSrc[237]; - pDst[238] = pSrc[238]; pDst[239] = pSrc[239]; - pDst[240] = pSrc[240]; pDst[241] = pSrc[241]; - pDst[242] = pSrc[242]; pDst[243] = pSrc[243]; - pDst[244] = pSrc[244]; pDst[245] = pSrc[245]; - pDst[246] = pSrc[246]; pDst[247] = pSrc[247]; - pDst[248] = pSrc[248]; pDst[249] = pSrc[249]; - pDst[250] = pSrc[250]; pDst[251] = pSrc[251]; - pDst[252] = pSrc[252]; pDst[253] = pSrc[253]; - pDst[254] = pSrc[254]; pDst[255] = pSrc[255]; - } - -#endif - -#ifdef XF86DRI - - ATIDRIUnlock(pScreenInfo); - -#endif /* XF86DRI */ - -} - -/* - * ATIMach64HideCursor -- - * - * Turn off hardware cursor. - */ -static void -ATIMach64HideCursor -( - ScrnInfoPtr pScreenInfo -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - if (!(pATI->NewHW.gen_test_cntl & GEN_CUR_EN)) - return; - - pATI->NewHW.gen_test_cntl &= ~GEN_CUR_EN; - out8(GEN_TEST_CNTL, GetByte(pATI->NewHW.gen_test_cntl, 0)); -} - -/* - * ATIMach64ShowCursor -- - * - * Turn on hardware cursor. - */ -static void -ATIMach64ShowCursor -( - ScrnInfoPtr pScreenInfo -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - if (pATI->NewHW.gen_test_cntl & GEN_CUR_EN) - return; - - pATI->NewHW.gen_test_cntl |= GEN_CUR_EN; - out8(GEN_TEST_CNTL, GetByte(pATI->NewHW.gen_test_cntl, 0)); -} - -/* - * ATIMach64UseHWCursor -- - * - * Notify cursor layer whether a hardware cursor is configured. - */ -static Bool -ATIMach64UseHWCursor -( - ScreenPtr pScreen, - CursorPtr pCursor -) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; - ATIPtr pATI = ATIPTR(pScreenInfo); - - if (!pATI->CursorBase) - return FALSE; - -#ifndef AVOID_CPIO - - /* - * For some reason, the hardware cursor isn't vertically scaled when a VGA - * doublescanned or multiscanned mode is in effect. - */ - if (pATI->NewHW.crtc == ATI_CRTC_MACH64) - return TRUE; - if ((pScreenInfo->currentMode->Flags & V_DBLSCAN) || - (pScreenInfo->currentMode->VScan > 1)) - return FALSE; - -#endif /* AVOID_CPIO */ - - return TRUE; -} - -/* - * ATIMach64CursorInit -- - * - * Initialise xf86CursorInfoRec fields with information specific to Mach64 - * variants. - */ -Bool -ATIMach64CursorInit -( - xf86CursorInfoPtr pCursorInfo -) -{ - /* - * For Mach64 variants, toggling hardware cursors off and on causes display - * artifacts. Ask the cursor support layers to always paint the cursor - * (whether or not it is entirely transparent) and to not hide the cursor - * when reloading its image. The two remaining reasons for turning off the - * hardware cursor are when it moves to a different screen or on a switch - * to a different virtual console. - */ - pCursorInfo->Flags = HARDWARE_CURSOR_TRUECOLOR_AT_8BPP | - HARDWARE_CURSOR_INVERT_MASK | - HARDWARE_CURSOR_SHOW_TRANSPARENT | - HARDWARE_CURSOR_UPDATE_UNHIDDEN | - HARDWARE_CURSOR_AND_SOURCE_WITH_MASK | - -#if X_BYTE_ORDER != X_LITTLE_ENDIAN - - HARDWARE_CURSOR_BIT_ORDER_MSBFIRST | - -#endif /* X_BYTE_ORDER */ - - HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_1; - pCursorInfo->MaxWidth = pCursorInfo->MaxHeight = 64; - - pCursorInfo->SetCursorColors = ATIMach64SetCursorColours; - pCursorInfo->SetCursorPosition = ATIMach64SetCursorPosition; - pCursorInfo->LoadCursorImage = ATIMach64LoadCursorImage; - pCursorInfo->HideCursor = ATIMach64HideCursor; - pCursorInfo->ShowCursor = ATIMach64ShowCursor; - pCursorInfo->UseHWCursor = ATIMach64UseHWCursor; - - return TRUE; -} diff --git a/src/atimach64cursor.h b/src/atimach64cursor.h deleted file mode 100644 index 6439f131..00000000 --- a/src/atimach64cursor.h +++ /dev/null @@ -1,33 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64cursor.h,v 1.1 2003/04/23 21:51:29 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIMACH64CURSOR_H___ -#define ___ATIMACH64CURSOR_H___ 1 - -#include "atiproto.h" - -#include "xf86Cursor.h" - -extern Bool ATIMach64CursorInit FunctionPrototype((xf86CursorInfoPtr)); - -#endif /* ___ATIMACH64CURSOR_H___ */ diff --git a/src/atimach64i2c.c b/src/atimach64i2c.c deleted file mode 100644 index 4cb565f6..00000000 --- a/src/atimach64i2c.c +++ /dev/null @@ -1,466 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64i2c.c,v 1.1 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atichip.h" -#include "atii2c.h" -#include "atimach64i2c.h" -#include "atimach64io.h" -#include "atituner.h" - -/* MPP_CONFIG register values */ -#define MPP_INIT pATI->NewHW.mpp_config - -#define MPP_WRITE (MPP_INIT ) -#define MPP_WRITEINC (MPP_INIT | (MPP_AUTO_INC_EN )) -#define MPP_READ (MPP_INIT | ( MPP_BUFFER_MODE_PREFETCH)) -#define MPP_READINC (MPP_INIT | (MPP_AUTO_INC_EN | MPP_BUFFER_MODE_PREFETCH)) - -/* - * ATIMach64MPPWaitForIdle -- - * - * Support function to wait for the Multimedia Peripheral Port to become idle. - * Currently, this function's return value indicates whether or not the port - * became idle within 512 polling iterations. For now, this value is ignored - * by the rest of the code, but might be used in the future. - */ -static Bool -ATIMach64MPPWaitForIdle -( - ATIPtr pATI -) -{ - CARD32 Count = 0x0200; - - while (in8(MPP_CONFIG + 3) & GetByte(MPP_BUSY, 3)) - { - if (!--Count) - return FALSE; - usleep(1); /* XXX Excessive? */ - } - - return TRUE; -} - -/* - * ATIMach64MPPSetAddress -- - * - * Sets a 16-bit ImpacTV address on the Multimedia Peripheral Port. - */ -static void -ATIMach64MPPSetAddress -( - ATIPtr pATI, - CARD16 Address -) -{ - ATIMach64MPPWaitForIdle(pATI); - outr(MPP_CONFIG, MPP_WRITEINC); - outr(MPP_ADDR, 0x00000008U); - out8(MPP_DATA, (CARD8)Address); - ATIMach64MPPWaitForIdle(pATI); - out8(MPP_DATA, (CARD8)(Address >> 8)); - ATIMach64MPPWaitForIdle(pATI); - outr(MPP_CONFIG, MPP_WRITE); - outr(MPP_ADDR, 0x00000018U); - ATIMach64MPPWaitForIdle(pATI); -} - -/* - * ATIMach64ImpacTVProbe -- - * - * This probes for an ImpacTV chip and returns its chip ID, or 0. - */ -static int -ATIMach64ImpacTVProbe -( - int iScreen, - ATIPtr pATI -) -{ - CARD8 ChipID = 0; - - /* Assume ATIModePreInit() has already been called */ - outr(MPP_STROBE_SEQ, pATI->NewHW.mpp_strobe_seq); - outr(TVO_CNTL, pATI->NewHW.tvo_cntl); - - outr(MPP_CONFIG, MPP_READ); - ATIMach64MPPWaitForIdle(pATI); - outr(MPP_ADDR, 0x0000000AU); - if (!(ChipID = in8(MPP_DATA))) - { - ATIMach64MPPWaitForIdle(pATI); - outr(MPP_ADDR, 0x00000023U); - if ((ChipID = in8(MPP_DATA)) != 0x54U) - { - ATIMach64MPPWaitForIdle(pATI); - outr(MPP_ADDR, 0x0000000BU); - ChipID = in8(MPP_DATA); - } - } - ATIMach64MPPWaitForIdle(pATI); - outr(MPP_CONFIG, MPP_WRITE); - - if (ChipID) - xf86DrvMsg(iScreen, X_PROBED, "ImpacTV chip ID 0x%02X detected.\n", - ChipID); - - return (int)(CARD16)ChipID; -} - -/* - * ATIMach64ImpacTVSetBits -- - * - * Controls I2C SDA and SCL lines through ImpacTV. - */ -static void -ATIMach64ImpacTVSetBits -( - ATII2CPtr pATII2C, - ATIPtr pATI, - CARD32 Bits -) -{ - pATII2C->I2CCur = Bits; - - ATIMach64MPPSetAddress(pATI, IT_I2C_CNTL); - - outr(MPP_CONFIG, MPP_WRITE); - - out8(MPP_DATA, (CARD8)Bits); - - ATIMach64MPPWaitForIdle(pATI); -} - -/* - * ATIMach64ImpacTVGetBits -- - * - * Returns the status of an ImpacTV's I2C control lines. - */ -static CARD32 -ATIMach64ImpacTVGetBits -( - ATIPtr pATI -) -{ - ATIMach64MPPSetAddress(pATI, IT_I2C_CNTL); - - outr(MPP_CONFIG, MPP_READ); - - ATIMach64MPPWaitForIdle(pATI); - - return in8(MPP_DATA); -} - -/* - * ATIMach64I2C_CNTLSetBits -- - * - * Controls SDA and SCL lines through a 3D Rage Pro's hardware assisted I2C. - */ -static void -ATIMach64I2C_CNTLSetBits -( - ATII2CPtr pATII2C, - ATIPtr pATI, - CARD32 Bits -) -{ - pATII2C->I2CCur = Bits; - - out8(I2C_CNTL_0 + 1, (CARD8)Bits); -} - -/* - * ATIMach64I2C_CNTLGetBits -- - * - * Returns the status of a 3D Rage Pro's hardware assisted I2C control lines. - */ -static CARD32 -ATIMach64I2C_CNTLGetBits -( - ATIPtr pATI -) -{ - return in8(I2C_CNTL_0 + 1); -} - -/* - * ATIMach64GP_IOSetBits -- - * - * Controls SDA and SCL control lines through a Mach64's GP_IO register. - */ -static void -ATIMach64GP_IOSetBits -( - ATII2CPtr pATII2C, - ATIPtr pATI, - CARD32 Bits -) -{ - pATII2C->I2CCur = Bits; - - outr(GP_IO, Bits); -} - -/* - * ATIMach64GP_IOGetBits -- - * - * Returns the status of I2C control lines through a Mach64's GP_IO register. - */ -static CARD32 -ATIMach64GP_IOGetBits -( - ATIPtr pATI -) -{ - return inr(GP_IO); -} - -#define GPIO1_MASK \ - (DAC_GIO_STATE_1 | DAC_GIO_DIR_1) -#define GPIO2_MASK \ - (GEN_GIO2_DATA_OUT | GEN_GIO2_DATA_IN | GEN_GIO2_WRITE) - -/* - * ATIMach64DAC_GENSetBits -- - * - * Controls SDA and SCL control lines through a Mach64's GEN_TEST_CNTL and - * DAC_CNTL registers. - */ -static void -ATIMach64DAC_GENSetBits -( - ATII2CPtr pATII2C, - ATIPtr pATI, - CARD32 Bits -) -{ - CARD32 tmp; - - pATII2C->I2CCur = Bits; - - tmp = inr(DAC_CNTL) & ~GPIO1_MASK; - outr(DAC_CNTL, tmp | (Bits & GPIO1_MASK)); - tmp = inr(GEN_TEST_CNTL) & ~GPIO2_MASK; - outr(GEN_TEST_CNTL, tmp | (Bits & GPIO2_MASK)); -} - -/* - * ATIMach64DAC_GENGetBits -- - * - * Returns the status of I2C control lines through a Mach64's GEN_TEST_CNTL and - * DAC_CNTL registers. - */ -static CARD32 -ATIMach64DAC_GENGetBits -( - ATIPtr pATI -) -{ - return (inr(DAC_CNTL) & GPIO1_MASK) | (inr(GEN_TEST_CNTL) & GPIO2_MASK); -} - -/* - * ATITVAddOnProbe -- - * - * Probe for an ATI-TV add-on card at specific addresses on an I2C bus. - */ -static Bool -ATITVAddOnProbe -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - I2CBusPtr pI2CBus -) -{ - I2CDevPtr pI2CDev = xnfcalloc(1, SizeOf(I2CDevRec)); - int Index; - I2CByte tmp; - - static const CARD8 ATITVAddOnAddresses[] = {0x70, 0x40, 0x78, 0x72, 0x42}; - - pI2CDev->DevName = "ATI-TV Add-on"; - pI2CDev->pI2CBus = pI2CBus; - pI2CDev->StartTimeout = pI2CBus->StartTimeout; - pI2CDev->BitTimeout = pI2CBus->BitTimeout; - pI2CDev->AcknTimeout = pI2CBus->AcknTimeout; - pI2CDev->ByteTimeout = pI2CBus->ByteTimeout; - - for (Index = 0; Index < NumberOf(ATITVAddOnAddresses); Index++) - { - pI2CDev->SlaveAddr = ATITVAddOnAddresses[Index]; - - if (xf86I2CFindDev(pI2CBus, pI2CDev->SlaveAddr)) - continue; - - tmp = 0xFFU; - - if (!(*pI2CBus->I2CWriteRead)(pI2CDev, &tmp, 1, NULL, 0) || - !(*pI2CBus->I2CWriteRead)(pI2CDev, NULL, 0, &tmp, 1) || - (tmp == 0xFFU) || ((tmp = tmp & 0x1FU) == /*ATI_TUNER_NONE*/0)) - continue; - - if (!xf86I2CDevInit(pI2CDev)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Failed to register I2C device for ATI-TV add-on.\n"); - break; - } - - if (pATI->Tuner != tmp) - { - if (pATI->Tuner != ATI_TUNER_NONE) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Tuner type mismatch: BIOS 0x%x, ATI-TV 0x%x.\n", - pATI->Tuner, tmp); - - pATI->Tuner = tmp; - } - - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s tuner detected on ATI-TV add-on adapter at I2C bus address" - " 0x%2x.\n", ATITuners[pATI->Tuner].name, pI2CDev->SlaveAddr); - - return TRUE; - } - - xfree(pI2CDev); - return FALSE; -} - -/* - * ATIMach64I2CPreInit -- - * - * This function potentially allocates an I2CBusRec and initialises it with - * ATI-specific and Mach64-specific information. - */ -void -ATIMach64I2CPreInit -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - I2CBusPtr pI2CBus; - ATII2CPtr pATII2C; - - if ((pATI->Chip < ATI_CHIP_264CT) || (pATI->Chip >= ATI_CHIP_Mach64)) - return; - - /* Create an I2CBusRec and generically prime it */ - if (!(pI2CBus = ATICreateI2CBusRec(pScreenInfo->scrnIndex, pATI, "Mach64"))) - return; - - pATII2C = pI2CBus->DriverPrivate.ptr; - - switch (pATI->Chip) - { - case ATI_CHIP_264GTPRO: - case ATI_CHIP_264LTPRO: - case ATI_CHIP_264XL: - case ATI_CHIP_MOBILITY: - /* - * These have I2C-specific registers. Assume older I2C access - * mechanisms are inoperative. - */ - pATII2C->I2CSetBits = ATIMach64I2C_CNTLSetBits; - pATII2C->I2CGetBits = ATIMach64I2C_CNTLGetBits; - pATII2C->SCLDir = pATII2C->SDADir = 0; - pATII2C->SCLGet = pATII2C->SCLSet = GetByte(I2C_CNTL_SCL, 1); - pATII2C->SDAGet = pATII2C->SDASet = GetByte(I2C_CNTL_SDA, 1); - - out8(I2C_CNTL_1 + 2, GetByte(I2C_SEL, 2)); - out8(I2C_CNTL_0 + 0, - GetByte(I2C_CNTL_STAT | I2C_CNTL_HPTR_RST, 0)); - break; - - case ATI_CHIP_264VTB: - case ATI_CHIP_264GTB: - case ATI_CHIP_264VT3: - case ATI_CHIP_264GTDVD: - case ATI_CHIP_264LT: - case ATI_CHIP_264VT4: - case ATI_CHIP_264GT2C: - /* If an ImpacTV chip is found, use it to provide I2C access */ - if (ATIMach64ImpacTVProbe(pScreenInfo->scrnIndex, pATI)) - { - pATII2C->I2CSetBits = ATIMach64ImpacTVSetBits; - pATII2C->I2CGetBits = ATIMach64ImpacTVGetBits; - pATII2C->SCLDir = IT_SCL_DIR; - pATII2C->SCLGet = IT_SCL_GET; - pATII2C->SCLSet = IT_SCL_SET; - pATII2C->SDADir = IT_SDA_DIR; - pATII2C->SDAGet = IT_SDA_GET; - pATII2C->SDASet = IT_SDA_SET; - - ATIMach64MPPSetAddress(pATI, IT_I2C_CNTL); - outr(MPP_CONFIG, MPP_WRITEINC); - out8(MPP_DATA, 0x00U); - out8(MPP_DATA, 0x55U); - out8(MPP_DATA, 0x00U); - out8(MPP_DATA, 0x00U); - ATIMach64MPPWaitForIdle(pATI); - break; - } - /* Otherwise, fall through to the older case */ - - case ATI_CHIP_264VT: - case ATI_CHIP_264GT: - /* First try GIO pins 11 (clock) and 4 (data) */ - pATII2C->I2CSetBits = ATIMach64GP_IOSetBits; - pATII2C->I2CGetBits = ATIMach64GP_IOGetBits; - pATII2C->SCLDir = GP_IO_DIR_B; - pATII2C->SCLGet = pATII2C->SCLSet = GP_IO_B; - pATII2C->SDADir = GP_IO_DIR_4; - pATII2C->SDAGet = pATII2C->SDASet = GP_IO_4; - - if (ATITVAddOnProbe(pScreenInfo, pATI, pI2CBus)) - break; - - /* Next, try pins 10 (clock) and 12 (data) */ - pATII2C->SCLDir = GP_IO_DIR_A; - pATII2C->SCLGet = pATII2C->SCLSet = GP_IO_A; - pATII2C->SDADir = GP_IO_DIR_C; - pATII2C->SDAGet = pATII2C->SDASet = GP_IO_C; - - if (ATITVAddOnProbe(pScreenInfo, pATI, pI2CBus)) - break; - /* Otherwise, fall back to ATI's first I2C implementation */ - - default: - /* - * First generation integrated controllers access GIO pin 1 (clock) - * though DAC_CNTL, and pin 2 (data) through GEN_TEST_CNTL. - */ - pATII2C->I2CSetBits = ATIMach64DAC_GENSetBits; - pATII2C->I2CGetBits = ATIMach64DAC_GENGetBits; - pATII2C->SCLDir = DAC_GIO_DIR_1; - pATII2C->SCLGet = pATII2C->SCLSet = DAC_GIO_STATE_1; - pATII2C->SDADir = GEN_GIO2_WRITE; - pATII2C->SDAGet = GEN_GIO2_DATA_IN; - pATII2C->SDASet = GEN_GIO2_DATA_OUT; - - (void)ATITVAddOnProbe(pScreenInfo, pATI, pI2CBus); - break; - } -} diff --git a/src/atimach64i2c.h b/src/atimach64i2c.h deleted file mode 100644 index 99309523..00000000 --- a/src/atimach64i2c.h +++ /dev/null @@ -1,34 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64i2c.h,v 1.1 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIMACH64I2C_H___ -#define ___ATIMACH64I2C_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -extern void ATIMach64I2CPreInit FunctionPrototype((ScrnInfoPtr, ATIPtr)); - -#endif /* ___ATIMACH64I2C_H___ */ diff --git a/src/atimach64io.c b/src/atimach64io.c deleted file mode 100644 index b4fafd97..00000000 --- a/src/atimach64io.c +++ /dev/null @@ -1,100 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64io.c,v 1.6 2003/04/23 21:51:29 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atichip.h" -#include "atimach64io.h" - -/* - * ATIMach64AccessPLLReg -- - * - * This function sets up the addressing required to access, for read or write, - * a 264xT's PLL registers. - */ -void -ATIMach64AccessPLLReg -( - ATIPtr pATI, - const CARD8 Index, - const Bool Write -) -{ - CARD8 clock_cntl1 = in8(CLOCK_CNTL + 1) & - ~GetByte(PLL_WR_EN | PLL_ADDR, 1); - - /* Set PLL register to be read or written */ - out8(CLOCK_CNTL + 1, clock_cntl1 | - GetByte(SetBits(Index, PLL_ADDR) | SetBits(Write, PLL_WR_EN), 1)); -} - -/* - * ATIMach64PollEngineStatus -- - * - * This function refreshes the driver's view of the draw engine's status. This - * has been moved into a separate compilation unit to prevent inlining. - */ -void -ATIMach64PollEngineStatus -( - ATIPtr pATI -) -{ - CARD32 IOValue; - int Count; - - if (pATI->Chip < ATI_CHIP_264VTB) - { - /* - * TODO: Deal with locked engines. - */ - IOValue = inm(FIFO_STAT); - pATI->EngineIsLocked = GetBits(IOValue, FIFO_ERR); - - /* - * The following counts the number of bits in FIFO_STAT_BITS, and is - * derived from miSetVisualTypes() (formerly cfbSetVisualTypes()). - */ - IOValue = GetBits(IOValue, FIFO_STAT_BITS); - Count = (IOValue >> 1) & 0x36DBU; - Count = IOValue - Count - ((Count >> 1) & 0x36DBU); - Count = ((Count + (Count >> 3)) & 0x71C7U) % 0x3FU; - Count = pATI->nFIFOEntries - Count; - if (Count > pATI->nAvailableFIFOEntries) - pATI->nAvailableFIFOEntries = Count; - - /* - * If the command FIFO is non-empty, then the engine isn't idle. - */ - if (pATI->nAvailableFIFOEntries < pATI->nFIFOEntries) - { - pATI->EngineIsBusy = TRUE; - return; - } - } - - IOValue = inm(GUI_STAT); - pATI->EngineIsBusy = GetBits(IOValue, GUI_ACTIVE); - Count = GetBits(IOValue, GUI_FIFO); - if (Count > pATI->nAvailableFIFOEntries) - pATI->nAvailableFIFOEntries = Count; -} diff --git a/src/atimach64io.h b/src/atimach64io.h deleted file mode 100644 index d9da1d2b..00000000 --- a/src/atimach64io.h +++ /dev/null @@ -1,372 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64io.h,v 1.15 2003/04/23 21:51:29 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Manuel Teira - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifndef ___ATIMACH64IO_H___ - -#if !defined(___ATI_H___) && defined(XFree86Module) -# error Missing #include "ati.h" before #include "atimach64io.h" -# undef XFree86Module -#endif - -#define ___ATIMACH64IO_H___ 1 - -#include "atiio.h" -#include "atistruct.h" - -/* - * A few important notes on some of the I/O statements provided: - * - * inl/outl 32-bit R/W through PIO space. The register is specified as the - * actual PIO address. These are actually defined in compiler.h. - * - * inw/outw 16-bit counterparts to inl/outl. Not used for Mach64 support. - * - * inb/outb 8-bit counterparts to inl/outl. - * - * inm/outm 32-bit R/W through MMIO space. The register is specified as - * the actual MMIO offset (with Block 1 following Block 0), which, - * in this case, is equivalent to the register's IOPortTag from - * atiregs.h. Can be used for those few non-FIFO'ed registers - * outside of Block 0's first 256 bytes. inm() can also be used - * for FIFO'ed registers if, and only if, it can be guaranteed to - * not have been previously FIFO'ed (e.g. when the engine is - * idle). pATI->pBlock array elements must have been previously - * set up by ATIMapApertures(). - * - * outf 32-bit write through MMIO cache. Identical to outm() but - * intended for FIFO'ed registers. There is no inf() provided. - * - * inr/outr 32-bit R/W through PIO or MMIO. Which one depends on the - * machine architecture. The register is specified as a IOPortTag - * from atiregs.h. Can only be used for registers in the first - * 256 bytes of MMIO space (in Block 0). Note that all of these - * registers are non-FIFO'ed. - * - * in8/out8 8-bit counterparts to inr/outr. - * - * For portability reasons, inr/outr/in8/out8 should be used in preference to - * inl/outl/inb/outb to/from any register space starting with CRTC_H_TOTAL_DISP - * but before DST_OFF_PITCH (in the order defined by atiregs.h). None of - * inm/outm/outf should ever be used for these registers. - * - * outf()'s should be grouped together as much as possible, while respecting - * any ordering constraints the engine might impose. Groups larger than 16 - * outf()'s should be split up into two or more groups as needed (but not - * necessarily wanted). The outf() groups that result should be immediately - * preceeded by an ATIMach64WaitForFIFO(n) call, where "n" is the number of - * outf()'s in the group with the exception that groups containing a single - * outf() should not be thus preceeded. This means "n" should not be less than - * 2, nor larger than 16. - */ - -/* - * Cave canem (or it WILL bite you): All Mach64 non-VGA registers are - * ================================ little-endian, no matter how they are - * accessed (nor by what). - */ - -#define inm(_Register) \ - MMIO_IN32(pATI->pBlock[GetBits(_Register, BLOCK_SELECT)], \ - (_Register) & MM_IO_SELECT) -#define outm(_Register, _Value) \ - MMIO_OUT32(pATI->pBlock[GetBits(_Register, BLOCK_SELECT)], \ - (_Register) & MM_IO_SELECT, _Value) - -#ifdef AVOID_CPIO - -# define inr(_Register) \ - MMIO_IN32(pATI->pBlock[0], (_Register) & MM_IO_SELECT) -# define outr(_Register, _Value) \ - MMIO_OUT32(pATI->pBlock[0], (_Register) & MM_IO_SELECT, _Value) - -# define in8(_Register) \ - MMIO_IN8(pATI->pBlock[0], \ - (_Register) & (MM_IO_SELECT | IO_BYTE_SELECT)) -# define out8(_Register, _Value) \ - MMIO_OUT8(pATI->pBlock[0], \ - (_Register) & (MM_IO_SELECT | IO_BYTE_SELECT), _Value) - -/* Cause a cpp syntax error if any of these are used */ -#undef inb -#undef inw -#undef inl -#undef outb -#undef outw -#undef outl - -#define inb() /* Nothing */ -#define inw() /* Nothing */ -#define inl() /* Nothing */ -#define outb() /* Nothing */ -#define outw() /* Nothing */ -#define outl() /* Nothing */ - -#else /* AVOID_CPIO */ - -# define ATIIOPort(_PortTag) \ - (((pATI->CPIODecoding == SPARSE_IO) ? \ - ((_PortTag) & (SPARSE_IO_SELECT | IO_BYTE_SELECT)) : \ - ((_PortTag) & (BLOCK_IO_SELECT | IO_BYTE_SELECT))) | \ - pATI->CPIOBase) - -# define inr(_Register) \ - inl(ATIIOPort(_Register)) -# define outr(_Register, _Value) \ - outl(ATIIOPort(_Register), _Value) - -# define in8(_Register) \ - inb(ATIIOPort(_Register)) -# define out8(_Register, _Value) \ - outb(ATIIOPort(_Register), _Value) - -#endif /* AVOID_CPIO */ - -extern void ATIMach64PollEngineStatus FunctionPrototype((ATIPtr)); - -/* - * MMIO cache definitions. - * - * Many FIFO'ed registers can be cached by the driver. Registers that qualify - * for caching must not contain values that can change without driver - * intervention. Thus registers that contain hardware counters, strobe lines, - * etc., cannot be cached. This caching is intended to minimise FIFO use. - * There is therefore not much point to enable it for non-FIFO'ed registers. - * - * The cache for a particular 32-bit register is enabled by coding a - * CacheRegister() line for that register in the ATIMach64Set() function. The - * integrity of the cache for a particular register should be verified by the - * ATIMach64Sync() function. This code should be kept in register order, as - * defined in atiregs.h. - */ -#define CacheByte(___Register) pATI->MMIOCached[CacheSlotOf(___Register) >> 3] -#define CacheBit(___Register) (0x80U >> (CacheSlotOf(___Register) & 0x07U)) - -#define RegisterIsCached(__Register) \ - (CacheByte(__Register) & CacheBit(__Register)) -#define CacheSlot(__Register) pATI->MMIOCache[CacheSlotOf(__Register)] - -#define CacheRegister(__Register) \ - CacheByte(__Register) |= CacheBit(__Register) -#define UncacheRegister(__Register) \ - CacheByte(__Register) &= ~CacheBit(__Register) - -/* This would be quite a bit slower as a function */ -#define outf(_Register, _Value) \ - do \ - { \ - CARD32 _IOValue = (_Value); \ - \ - if (!RegisterIsCached(_Register) || \ - (_IOValue != CacheSlot(_Register))) \ - { \ - while (!pATI->nAvailableFIFOEntries--) \ - ATIMach64PollEngineStatus(pATI); \ - MMIO_OUT32(pATI->pBlock[GetBits(_Register, BLOCK_SELECT)], \ - (_Register) & MM_IO_SELECT, _IOValue); \ - CacheSlot(_Register) = _IOValue; \ - pATI->EngineIsBusy = TRUE; \ - } \ - } while (0) - -/* - * This is no longer as critical, especially for _n == 1. However, - * there is still a need to ensure _n <= pATI->nFIFOEntries. - */ -#define ATIMach64WaitForFIFO(_pATI, _n) \ - while ((_pATI)->nAvailableFIFOEntries < (_n)) \ - ATIMach64PollEngineStatus(_pATI) - -#define ATIMach64WaitForIdle(_pATI) \ - while ((_pATI)->EngineIsBusy) \ - ATIMach64PollEngineStatus(_pATI) - -#ifdef XF86DRI - -#define ATIDRIWaitForIdle(_pATI) \ -do { \ - ATIDRIServerInfoPtr pATIDRIServer = _pATI->pDRIServerInfo; \ - int ret; \ - \ - if (pATIDRIServer && pATI->directRenderingEnabled) { \ - /* Wait for DMA to complete */ \ - ret = drmCommandNone(_pATI->drmFD, DRM_MACH64_IDLE); \ - if (ret) { \ - drmCommandNone(_pATI->drmFD, DRM_MACH64_RESET); \ - } \ - \ - /* Force updating of FIFO entry counters */ \ - pATI->EngineIsBusy = TRUE; \ - ATIMach64PollEngineStatus(_pATI); \ - } else { \ - ATIMach64WaitForIdle(_pATI); \ - } \ -} while (0) - -#define ATIDRILock(_pScrInfo) \ -do \ -{ \ - ATIPtr _pATI=ATIPTR(_pScrInfo); \ - if (_pATI->directRenderingEnabled) \ - { \ - DRILock(_pScrInfo->pScreen, 0); \ - pATI->NeedDRISync = TRUE; \ - } \ -} while (0) - -#define ATIDRIUnlock(_pScrInfo) \ -do \ -{ \ - ATIPtr _pATI=ATIPTR(_pScrInfo); \ - if (_pATI->directRenderingEnabled) \ - { \ - DRIUnlock(_pScrInfo->pScreen); \ - } \ -} while (0) - -#define ATIDRISync(_pScrInfo) \ -do \ -{ \ - ATIPtr _pATI=ATIPTR(_pScrInfo); \ - if (_pATI->directRenderingEnabled && _pATI->pXAAInfo) \ - { \ - if (_pATI->NeedDRISync) (*_pATI->pXAAInfo->Sync)(_pScrInfo); \ - } \ -} while (0) - -#else /* XF86DRI */ - - -#define ATIDRIWaitForIdle(_pATI) -#define ATIDRILock(_pScrInfo) -#define ATIDRIUnlock(_pScrInfo) -#define ATIDRISync(_pScrInfo) - -#endif /* XF86DRI */ - - -/* - * An outf() variant to write two registers such that the second register is - * is always written whenever either is to be changed. - */ -#define outq(_Register1, _Register2, _Value1, _Value2) \ - do \ - { \ - CARD32 _IOValue1 = (_Value1), \ - _IOValue2 = (_Value2); \ - \ - if (!RegisterIsCached(_Register1) || \ - (_IOValue1 != CacheSlot(_Register1))) \ - { \ - ATIMach64WaitForFIFO(pATI, 2); \ - pATI->nAvailableFIFOEntries -= 2; \ - MMIO_OUT32(pATI->pBlock[GetBits(_Register1, BLOCK_SELECT)], \ - (_Register1) & MM_IO_SELECT, _IOValue1); \ - MMIO_OUT32(pATI->pBlock[GetBits(_Register2, BLOCK_SELECT)], \ - (_Register2) & MM_IO_SELECT, _IOValue2); \ - CacheSlot(_Register1) = _IOValue1; \ - CacheSlot(_Register2) = _IOValue2; \ - pATI->EngineIsBusy = TRUE; \ - } \ - else if (!RegisterIsCached(_Register2) || \ - (_IOValue2 != CacheSlot(_Register2))) \ - { \ - while (!pATI->nAvailableFIFOEntries--) \ - ATIMach64PollEngineStatus(pATI); \ - MMIO_OUT32(pATI->pBlock[GetBits(_Register2, BLOCK_SELECT)], \ - (_Register2) & MM_IO_SELECT, _IOValue2); \ - CacheSlot(_Register2) = _IOValue2; \ - pATI->EngineIsBusy = TRUE; \ - } \ - } while (0) - -extern void ATIMach64AccessPLLReg FunctionPrototype((ATIPtr, const CARD8, - const Bool)); - -#define ATIMach64GetPLLReg(_Index) \ - ( \ - ATIMach64AccessPLLReg(pATI, _Index, FALSE), \ - in8(CLOCK_CNTL + 2) \ - ) -#define ATIMach64PutPLLReg(_Index, _Value) \ - do \ - { \ - ATIMach64AccessPLLReg(pATI, _Index, TRUE); \ - out8(CLOCK_CNTL + 2, _Value); \ - } while (0) - -#define ATIMach64GetLCDReg(_Index) \ - ( \ - out8(LCD_INDEX, SetBits(_Index, LCD_REG_INDEX)), \ - inr(LCD_DATA) \ - ) -#define ATIMach64PutLCDReg(_Index, _Value) \ - do \ - { \ - out8(LCD_INDEX, SetBits(_Index, LCD_REG_INDEX)); \ - outr(LCD_DATA, _Value); \ - } while (0) - -#define ATIMach64GetTVReg(_Index) \ - ( \ - out8(TV_OUT_INDEX, SetBits(_Index, TV_REG_INDEX)), \ - inr(TV_OUT_DATA) \ - ) -#define ATIMach64PutTVReg(_Index, _Value) \ - do \ - { \ - out8(TV_OUT_INDEX, SetBits(_Index, TV_REG_INDEX)); \ - outr(TV_OUT_DATA, _Value); \ - } while (0) - -/* - * Block transfer definitions. - */ - -#if defined(GCCUSESGAS) && \ - (defined(i386) || defined(__i386) || defined(__i386__)) - -#define ATIMove32(_pDst, _pSrc, _nCount) \ - do \ - { \ - long d0, d1, d2; \ - __asm__ __volatile__ \ - ( \ - "cld\n\t" \ - "rep ; movsl" \ - : "=&c" (d0), \ - "=&D" (d1), \ - "=&S" (d2) \ - : "0" (_nCount), \ - "1" (_pDst), \ - "2" (_pSrc) \ - : "memory" \ - ); \ - } while (0) - -#endif - -#endif /* ___ATIMACH64IO_H___ */ diff --git a/src/atimach64xv.c b/src/atimach64xv.c deleted file mode 100644 index d45e306b..00000000 --- a/src/atimach64xv.c +++ /dev/null @@ -1,1493 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64xv.c,v 1.6 2003/07/19 15:26:54 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiaccel.h" -#include "atichip.h" -#include "atimach64accel.h" -#include "atimach64io.h" -#include "atimach64xv.h" - -#include "Xv.h" -#include "fourcc.h" - -#define MAKE_ATOM(string) MakeAtom(string, strlen(string), TRUE) -#define MaxScale (CARD32)(CARD16)(-1) - -static unsigned long ATIMach64XVAtomGeneration = (unsigned long)(-1); - -static XF86VideoEncodingRec ATIMach64VideoEncoding_A[] = -{ - { 0, "XV_IMAGE", 384, 2048, {1, 1} } -}; -#define nATIMach64VideoEncoding_A NumberOf(ATIMach64VideoEncoding_A) - -static XF86VideoEncodingRec ATIMach64VideoEncoding_B[] = -{ - { 0, "XV_IMAGE", 720, 2048, {1, 1} } -}; -#define nATIMach64VideoEncoding_B NumberOf(ATIMach64VideoEncoding_B) - -/* nATIMach64VideoEncoding_[AB] should be equal */ -#define nATIMach64VideoEncoding nATIMach64VideoEncoding_A - -static XF86VideoFormatRec ATIMach64VideoFormat[] = -{ - { 8, TrueColor}, - { 8, DirectColor}, - { 8, PseudoColor}, - { 8, GrayScale}, - { 8, StaticGray}, - { 8, StaticColor}, - {15, TrueColor}, - {16, TrueColor}, - {24, TrueColor}, - {15, DirectColor}, - {16, DirectColor}, - {24, DirectColor} -}; -#define nATIMach64VideoFormat NumberOf(ATIMach64VideoFormat) - -static XF86AttributeRec ATIMach64Attribute[] = -{ - /* These are only supported on the Rage Pro and later ... */ - { - XvSettable | XvGettable, - -1000, 1000, - "XV_SATURATION" - }, - { - XvSettable | XvGettable, - -1000, 1000, - "XV_BRIGHTNESS" - }, - { - XvSettable | XvGettable, - -1000, 1000, - "XV_COLOUR" - }, - { - XvSettable | XvGettable, - -1000, 1000, - "XV_COLOR" - }, - - /* Local attributes, odds and ends for compatibility, etc... */ - { - XvSettable | XvGettable, - 0, 1, - "XV_AUTOPAINT_COLOURKEY" - }, - { - XvSettable | XvGettable, - 0, 1, - "XV_AUTOPAINT_COLORKEY" - }, - { - XvSettable | XvGettable, - 0, (1 << 24) - 1, - "XV_COLOURKEY" - }, - { - XvSettable | XvGettable, - 0, (1 << 24) - 1, - "XV_COLORKEY" - }, - { - XvSettable | XvGettable, - 0, (1 << 24) - 1, - "XV_COLOURKEY_MASK" - }, - { - XvSettable | XvGettable, - 0, (1 << 24) - 1, - "XV_COLORKEY_MASK" - }, - { - XvSettable, - 0, 0, - "XV_SET_DEFAULTS" - }, - { /* Keep last */ - XvSettable | XvGettable, - 0, 1, - "XV_DOUBLE_BUFFER" - } -}; -#define nATIMach64Attribute NumberOf(ATIMach64Attribute) - -static XF86ImageRec ATIMach64Image[] = -{ - XVIMAGE_YUY2, - XVIMAGE_UYVY, - XVIMAGE_YV12, - XVIMAGE_I420 -}; -#define nATIMach64Image NumberOf(ATIMach64Image) - -/* A local XVideo adaptor attribute record */ -typedef struct _ATIMach64Attribute -{ - Atom AttributeID; - INT32 MaxValue; /* ... for the hardware */ - void (*SetAttribute) NestedPrototype((ATIPtr, INT32)); - INT32 (*GetAttribute) NestedPrototype((ATIPtr)); -} ATIMach64AttributeRec, *ATIMach64AttributePtr; - -/* Functions to get/set XVideo adaptor attributes */ - -static void -ATIMach64SetSaturationAttribute -( - ATIPtr pATI, - INT32 Value -) -{ - /* Set the register */ - pATI->NewHW.scaler_colour_cntl &= - ~(SCALE_SATURATION_U | SCALE_SATURATION_V); - pATI->NewHW.scaler_colour_cntl |= SetBits(Value, SCALE_SATURATION_U) | - SetBits(Value, SCALE_SATURATION_V); - outf(SCALER_COLOUR_CNTL, pATI->NewHW.scaler_colour_cntl); -} - -static INT32 -ATIMach64GetSaturationAttribute -( - ATIPtr pATI -) -{ - return (INT32)GetBits(pATI->NewHW.scaler_colour_cntl, SCALE_SATURATION_U); -} - -static void -ATIMach64SetBrightnessAttribute -( - ATIPtr pATI, - INT32 Value -) -{ - /* Set the register */ - pATI->NewHW.scaler_colour_cntl &= ~SCALE_BRIGHTNESS; - pATI->NewHW.scaler_colour_cntl |= SetBits(Value, SCALE_BRIGHTNESS); - outf(SCALER_COLOUR_CNTL, pATI->NewHW.scaler_colour_cntl); -} - -static INT32 -ATIMach64GetBrightnessAttribute -( - ATIPtr pATI -) -{ - return (INT32)GetBits(pATI->NewHW.scaler_colour_cntl, SCALE_BRIGHTNESS); -} - -static void -ATIMach64SetDoubleBufferAttribute -( - ATIPtr pATI, - INT32 Value -) -{ - pATI->DoubleBuffer = Value; -} - -static INT32 -ATIMach64GetDoubleBufferAttribute -( - ATIPtr pATI -) -{ - return (int)pATI->DoubleBuffer; -} - -static void -ATIMach64SetAutoPaintAttribute -( - ATIPtr pATI, - INT32 Value -) -{ - pATI->AutoPaint = Value; -} - -static INT32 -ATIMach64GetAutoPaintAttribute -( - ATIPtr pATI -) -{ - return (int)pATI->AutoPaint; -} - -static void -ATIMach64SetColourKeyAttribute -( - ATIPtr pATI, - INT32 Value -) -{ - pATI->NewHW.overlay_graphics_key_clr = - (CARD32)(Value & ((1 << pATI->depth) - 1)); - outf(OVERLAY_GRAPHICS_KEY_CLR, pATI->NewHW.overlay_graphics_key_clr); -} - -static INT32 -ATIMach64GetColourKeyAttribute -( - ATIPtr pATI -) -{ - return (INT32)pATI->NewHW.overlay_graphics_key_clr; -} - -static void -ATIMach64SetColourKeyMaskAttribute -( - ATIPtr pATI, - INT32 Value -) -{ - pATI->NewHW.overlay_graphics_key_msk = - (CARD32)(Value & ((1 << pATI->depth) - 1)); - outf(OVERLAY_GRAPHICS_KEY_MSK, pATI->NewHW.overlay_graphics_key_msk); -} - -static INT32 -ATIMach64GetColourKeyMaskAttribute -( - ATIPtr pATI -) -{ - return (INT32)pATI->NewHW.overlay_graphics_key_msk; -} - -/* - * ATIMach64SetDefaultAttributes -- - * - * This function calls other functions to set default values for the various - * attributes of an XVideo port. - */ -static void -ATIMach64SetDefaultAttributes -( - ATIPtr pATI, - INT32 Value -) -{ - ATIMach64SetAutoPaintAttribute(pATI, TRUE); - ATIMach64SetDoubleBufferAttribute(pATI, FALSE); - ATIMach64SetColourKeyMaskAttribute(pATI, (1 << pATI->depth) - 1); - ATIMach64SetColourKeyAttribute(pATI, (3 << ((2 * pATI->depth) / 3)) | - (2 << ((1 * pATI->depth) / 3)) | - (1 << ((0 * pATI->depth) / 3))); - - if (pATI->Chip < ATI_CHIP_264GTPRO) - return; - - ATIMach64SetBrightnessAttribute(pATI, 32); - ATIMach64SetSaturationAttribute(pATI, 16); -} - -/* - * There is a one-to-one correspondance between elements of the following array - * and those of ATIMach64Attribute. - */ -static ATIMach64AttributeRec ATIMach64AttributeInfo[nATIMach64Attribute] = -{ - { /* SATURATION */ - 0, 23, - ATIMach64SetSaturationAttribute, - ATIMach64GetSaturationAttribute - }, - { /* BRIGHTNESS */ - 0, 63, - ATIMach64SetBrightnessAttribute, - ATIMach64GetBrightnessAttribute - }, - { /* COLOUR */ - 0, 23, - ATIMach64SetSaturationAttribute, - ATIMach64GetSaturationAttribute - }, - { /* COLOR */ - 0, 23, - ATIMach64SetSaturationAttribute, - ATIMach64GetSaturationAttribute - }, - { /* AUTOPAINT_COLOURKEY */ - 0, 1, - ATIMach64SetAutoPaintAttribute, - ATIMach64GetAutoPaintAttribute - }, - { /* AUTOPAINT_COLORKEY */ - 0, 1, - ATIMach64SetAutoPaintAttribute, - ATIMach64GetAutoPaintAttribute - }, - { /* COLOURKEY */ - 0, (1 << 24) - 1, - ATIMach64SetColourKeyAttribute, - ATIMach64GetColourKeyAttribute - }, - { /* COLORKEY */ - 0, (1 << 24) - 1, - ATIMach64SetColourKeyAttribute, - ATIMach64GetColourKeyAttribute - }, - { /* COLOURKEY_MASK */ - 0, (1 << 24) - 1, - ATIMach64SetColourKeyMaskAttribute, - ATIMach64GetColourKeyMaskAttribute - }, - { /* COLORKEY_MASK */ - 0, (1 << 24) - 1, - ATIMach64SetColourKeyMaskAttribute, - ATIMach64GetColourKeyMaskAttribute - }, - { /* SET_DEFAULTS */ - 0, 0, - ATIMach64SetDefaultAttributes, - NULL - }, - { /* DOUBLE_BUFFER */ - 0, 1, - ATIMach64SetDoubleBufferAttribute, - ATIMach64GetDoubleBufferAttribute - } -}; - -/* - * ATIMach64FindAttribute -- - * - * This function is called to locate an Xv attribute's table entry. - */ -static int -ATIMach64FindPortAttribute -( - ATIPtr pATI, - Atom AttributeID -) -{ - int iAttribute; - - if (pATI->Chip < ATI_CHIP_264GTPRO) - iAttribute = 4; - else - iAttribute = 0; - - for (; iAttribute < nATIMach64Attribute; iAttribute++) - if (AttributeID == ATIMach64AttributeInfo[iAttribute].AttributeID) - return iAttribute; - - return -1; -} - -/* - * ATIMach64SetPortAttribute -- - * - * This function sets the value of a particular port's attribute. - */ -static int -ATIMach64SetPortAttribute -( - ScrnInfoPtr pScreenInfo, - Atom AttributeID, - INT32 Value, - pointer pATI -) -{ - INT32 Range; - int iAttribute; - - if (((iAttribute = ATIMach64FindPortAttribute(pATI, AttributeID)) < 0) || - !ATIMach64AttributeInfo[iAttribute].SetAttribute) - return BadMatch; - - Range = ATIMach64Attribute[iAttribute].max_value - - ATIMach64Attribute[iAttribute].min_value; - - if (Range >= 0) - { - /* Limit and scale the value */ - Value -= ATIMach64Attribute[iAttribute].min_value; - - if (Value < 0) - Value = 0; - else if (Value > Range) - Value = Range; - - if (Range != ATIMach64AttributeInfo[iAttribute].MaxValue) - { - if (ATIMach64AttributeInfo[iAttribute].MaxValue > 0) - Value *= ATIMach64AttributeInfo[iAttribute].MaxValue; - if (Range > 0) - Value /= Range; - } - } - - (*ATIMach64AttributeInfo[iAttribute].SetAttribute)(pATI, Value); - - return Success; -} - -/* - * ATIMach64SetPortAttribute -- - * - * This function retrieves the value of a particular port's attribute. - */ -static int -ATIMach64GetPortAttribute -( - ScrnInfoPtr pScreenInfo, - Atom AttributeID, - INT32 *Value, - pointer pATI -) -{ - INT32 Range; - int iAttribute; - - if (!Value || - ((iAttribute = ATIMach64FindPortAttribute(pATI, AttributeID)) < 0) || - !ATIMach64AttributeInfo[iAttribute].GetAttribute) - return BadMatch; - - *Value = (*ATIMach64AttributeInfo[iAttribute].GetAttribute)(pATI); - - Range = ATIMach64Attribute[iAttribute].max_value - - ATIMach64Attribute[iAttribute].min_value; - - if (Range >= 0) - { - if (Range != ATIMach64AttributeInfo[iAttribute].MaxValue) - { - /* (Un-)scale the value */ - if (Range > 0) - *Value *= Range; - if (ATIMach64AttributeInfo[iAttribute].MaxValue > 0) - *Value /= ATIMach64AttributeInfo[iAttribute].MaxValue; - } - - *Value += ATIMach64Attribute[iAttribute].min_value; - } - - return Success; -} - -/* - * ATIMach64RemoveLinearCallback -- - * - * This is called by the framebuffer manager to release the offscreen XVideo - * buffer after the video has been temporarily disabled due to its window being - * iconified or completely occluded. - */ -static void -ATIMach64RemoveLinearCallback -( - FBLinearPtr pLinear -) -{ - ATIPtr pATI = ATIPTR(xf86Screens[pLinear->pScreen->myNum]); - - pATI->pXVBuffer = NULL; - outf(OVERLAY_SCALE_CNTL, SCALE_EN); -} - -/* - * ATIMach64StopVideo -- - * - * This is called to stop displaying a video. Note that, to prevent jittering - * this doesn't actually turn off the overlay unless 'Cleanup' is TRUE, i.e. - * when the video is to be actually stopped rather than temporarily disabled. - */ -static void -ATIMach64StopVideo -( - ScrnInfoPtr pScreenInfo, - pointer Data, - Bool Cleanup -) -{ - ScreenPtr pScreen = pScreenInfo->pScreen; - ATIPtr pATI = Data; - - if (pATI->ActiveSurface) - return; - - REGION_EMPTY(pScreen, &pATI->VideoClip); - - if (!Cleanup) - { - /* - * Free offscreen buffer if/when its allocation is needed by XAA's - * pixmap cache. - */ - if (pATI->pXVBuffer) - pATI->pXVBuffer->RemoveLinearCallback = - ATIMach64RemoveLinearCallback; - return; - } - - pATI->pXVBuffer = ATIResizeOffscreenLinear(pScreen, pATI->pXVBuffer, 0); - outf(OVERLAY_SCALE_CNTL, SCALE_EN); -} - -/* - * ATIMach64QueryBestSize -- - * - * Quoting XVideo docs: - * - * This function provides the client with a way to query what the destination - * dimensions would end up being if they were to request that an area - * VideoWidth by VideoHeight from the video stream be scaled to rectangle of - * DrawableWidth by DrawableHeight on the screen. Since it is not expected - * that all hardware will be able to get the target dimensions exactly, it is - * important that the driver provide this function. - */ -static void -ATIMach64QueryBestSize -( - ScrnInfoPtr pScreenInfo, - Bool Motion, - short VideoWidth, - short VideoHeight, - short DrawableWidth, - short DrawableHeight, - unsigned int *Width, - unsigned int *Height, - pointer pATI -) -{ - *Width = DrawableWidth; - *Height = DrawableHeight; -} - -/* - * ATIMach64QueryImageAttributes -- - * - * Quoting XVideo docs: - * - * This function is called to let the driver specify how data for a particular - * image of size Width by Height should be stored. Sometimes only the size and - * corrected width and height are needed. In that case pitches and offsets are - * NULL. The size of the memory required for the image is returned by this - * function. The width and height of the requested image can be altered by the - * driver to reflect format limitations (such as component sampling periods - * that are larger than one). If pPitch and pOffset are not NULL, these will - * be arrays with as many elements in them as there are planes in the image - * format. The driver should specify the pitch (in bytes) of each scanline in - * the particular plane as well as the offset to that plane (in bytes) from the - * beginning of the image. - */ -static int -ATIMach64QueryImageAttributes -( - ScrnInfoPtr pScreenInfo, - int ImageID, - unsigned short *Width, - unsigned short *Height, - int *pPitch, - int *pOffset -) -{ - int Size, tmp; - - if (!Width || !Height) - return 0; - - if (*Width > 2048) - *Width = 2048; - else - *Width = (*Width + 1) & ~1; - - if (*Height > 2048) - *Height = 2048; - - if (pOffset) - pOffset[0] = 0; - - switch (ImageID) - { - case FOURCC_YV12: - case FOURCC_I420: - *Height = (*Height + 1) & ~1; - Size = (*Width + 3) & ~3; - if (pPitch) - pPitch[0] = Size; - Size *= *Height; - if (pOffset) - pOffset[1] = Size; - tmp = ((*Width >> 1) + 3) & ~3; - if (pPitch) - pPitch[1] = pPitch[2] = tmp; - tmp *= (*Height >> 1); - Size += tmp; - if (pOffset) - pOffset[2] = Size; - Size += tmp; - break; - - case FOURCC_UYVY: - case FOURCC_YUY2: - Size = *Width << 1; - if (pPitch) - pPitch[0] = Size; - Size *= *Height; - break; - - default: - Size = 0; - break; - } - - return Size; -} - -/* - * ATIMach64ScaleVideo -- - * - * This function is called to calculate overlay scaling factors. - */ -static void -ATIMach64ScaleVideo -( - ATIPtr pATI, - DisplayModePtr pMode, - int SrcW, - int SrcH, - int DstW, - int DstH, - CARD32 *pHScale, - CARD32 *pVScale -) -{ - int Shift; - - *pHScale = ATIDivide(SrcW, DstW, - GetBits(pATI->NewHW.pll_vclk_cntl, PLL_ECP_DIV) + 12, 0); - - Shift = 12; - if (pMode->Flags & V_INTERLACE) - Shift++; - - if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0)) - { - if (pMode->VDisplay < pATI->LCDVertical) - { - SrcH *= pMode->VDisplay; - DstH *= pATI->LCDVertical; - } - } - else - { - if (pMode->Flags & V_DBLSCAN) - Shift--; - if (pMode->VScan > 1) - DstH *= pMode->VScan; - } - - *pVScale = ATIDivide(SrcH, DstH, Shift, 0); -} - -/* - * ATIMach64ClipVideo -- - * - * Clip the video (both source and destination) and make various other - * adjustments. - */ -static Bool -ATIMach64ClipVideo -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - int ImageID, - short SrcX, - short SrcY, - short SrcW, - short SrcH, - short DstX, - short DstY, - short *DstW, - short *DstH, - short Width, - short Height, - RegionPtr pClip, - BoxPtr pDstBox, - INT32 *SrcX1, - INT32 *SrcX2, - INT32 *SrcY1, - INT32 *SrcY2, - int *SrcLeft, - int *SrcTop -) -{ - CARD32 HScale, VScale; - - /* Check hardware limits */ - if ((Height <= 0) || (Height > 2048) || (Width <= 0) || (Width > 720) || - ((Width > 384) && (pATI->Chip < ATI_CHIP_264VTB))) - return FALSE; - - ATIMach64ScaleVideo(pATI, pScreenInfo->currentMode, - SrcW, SrcH, *DstW, *DstH, &HScale, &VScale); - if (!HScale || !VScale) - return FALSE; - if (HScale > MaxScale) - *DstW = (*DstW * HScale) / MaxScale; - if (VScale > MaxScale) - *DstH = (*DstH * HScale) / MaxScale; - - /* Clip both the source and the destination */ - *SrcX1 = SrcX; - *SrcX2 = SrcX + SrcW; - *SrcY1 = SrcY; - *SrcY2 = SrcY + SrcH; - - pDstBox->x1 = DstX; - pDstBox->x2 = DstX + *DstW; - pDstBox->y1 = DstY; - pDstBox->y2 = DstY + *DstH; - - if (!xf86XVClipVideoHelper(pDstBox, SrcX1, SrcX2, SrcY1, SrcY2, - pClip, Width, Height)) - return FALSE; - - /* - * Reset overlay scaler origin. This prevents jittering during - * viewport panning or while the video is being moved or gradually - * obscured/unobscured. - */ - pDstBox->x1 = DstX; - pDstBox->y1 = DstY; - - /* Translate to the current viewport */ - pDstBox->x1 -= pScreenInfo->frameX0; - pDstBox->x2 -= pScreenInfo->frameX0; - pDstBox->y1 -= pScreenInfo->frameY0; - pDstBox->y2 -= pScreenInfo->frameY0; - - *SrcLeft = *SrcTop = 0; - - /* - * If the overlay scaler origin ends up outside the current viewport, move - * it to the viewport's top left corner. This unavoidably causes a slight - * jittering in the image (even with double-buffering). - */ - if (pDstBox->x1 < 0) - { - *SrcLeft = ((-pDstBox->x1 * SrcW) / *DstW) & ~1; - pDstBox->x1 = 0; - } - - if (pDstBox->y1 < 0) - { - *SrcTop = (-pDstBox->y1 * SrcH) / *DstH; - pDstBox->y1 = 0; - - switch (ImageID) - { - case FOURCC_YV12: - case FOURCC_I420: - *SrcTop = (*SrcTop + 1) & ~1; - break; - - default: - break; - } - } - - return TRUE; -} - -#ifdef ATIMove32 - -/* A faster intercept */ -#undef xf86XVCopyPacked -#define xf86XVCopyPacked ATIMach64XVCopyPacked - -static void -ATIMach64XVCopyPacked -( - const CARD8 *pSrc, - CARD8 *pDst, - int SrcPitch, - int DstPitch, - int Height, - int Width -) -{ - Width >>= 1; - while (--Height >= 0) - { - ATIMove32(pDst, pSrc, Width); - pSrc += SrcPitch; - pDst += DstPitch; - } -} - -#endif - -/* - * ATIMach64DisplayVideo -- - * - * This function programmes Mach64 registers needed to display a video. - */ -static void -ATIMach64DisplayVideo -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - BoxPtr pDstBox, - int ImageID, - int Offset, - int Pitch, - short SrcW, - short SrcH, - short DstW, - short DstH, - short Width, - short Height -) -{ - DisplayModePtr pMode = pScreenInfo->currentMode; - CARD32 HScale, VScale; - - if (pMode->VScan > 1) - { - pDstBox->y1 *= pMode->VScan; - pDstBox->y2 *= pMode->VScan; - } - if (pMode->Flags & V_DBLSCAN) - { - pDstBox->y1 <<= 1; - pDstBox->y2 <<= 1; - } - - /* Recalculate overlay scale factors */ - ATIMach64ScaleVideo(pATI, pMode, SrcW, SrcH, DstW, DstH, &HScale, &VScale); - - pATI->NewHW.video_format &= ~SCALER_IN; - if (ImageID == FOURCC_UYVY) - pATI->NewHW.video_format |= SCALER_IN_YVYU422; - else - pATI->NewHW.video_format |= SCALER_IN_VYUY422; - - ATIMach64WaitForFIFO(pATI, 8); - outq(OVERLAY_Y_X_START, OVERLAY_Y_X_END, OVERLAY_LOCK_START | - SetWord(pDstBox->x1, 1) | SetWord(pDstBox->y1, 0), - SetWord(pDstBox->x2 - 1, 1) | SetWord(pDstBox->y2 - 1, 0)); - outf(OVERLAY_SCALE_INC, SetWord(HScale, 1) | SetWord(VScale, 0)); - outf(SCALER_HEIGHT_WIDTH, SetWord(Width, 1) | SetWord(Height, 0)); - outf(VIDEO_FORMAT, pATI->NewHW.video_format); - - if (pATI->Chip < ATI_CHIP_264VTB) - { - outf(BUF0_OFFSET, Offset); - outf(BUF0_PITCH, Pitch); - } - else - { - outf(SCALER_BUF0_OFFSET, Offset); - outf(SCALER_BUF_PITCH, Pitch); - } - - outf(OVERLAY_SCALE_CNTL, SCALE_PIX_EXPAND | OVERLAY_EN | SCALE_EN); -} - -/* - * ATIMach64PutImage -- - * - * This function is called to put a video image on the screen. - */ -static int -ATIMach64PutImage -( - ScrnInfoPtr pScreenInfo, - short SrcX, - short SrcY, - short DstX, - short DstY, - short SrcW, - short SrcH, - short DstW, - short DstH, - int ImageID, - unsigned char *Buffer, - short Width, - short Height, - Bool Synchronise, - RegionPtr pClip, - pointer Data -) -{ - ATIPtr pATI = Data; - ScreenPtr pScreen; - INT32 SrcX1, SrcX2, SrcY1, SrcY2; - BoxRec DstBox; - int SrcPitch, SrcPitchUV, DstPitch, DstSize; - int SrcTop, SrcLeft, DstWidth, DstHeight; - int Top, Bottom, Left, Right, nLine, nPixel, Offset; - int OffsetV, OffsetU; - int tmp; - CARD8 *pDst; - - if (pATI->ActiveSurface) - return Success; - - if (!ATIMach64ClipVideo(pScreenInfo, pATI, ImageID, - SrcX, SrcY, SrcW, SrcH, - DstX, DstY, &DstW, &DstH, - Width, Height, pClip, &DstBox, - &SrcX1, &SrcX2, &SrcY1, &SrcY2, - &SrcLeft, &SrcTop)) - return Success; - - pScreen = pScreenInfo->pScreen; - - DstWidth = Width - SrcLeft; - DstHeight = Height - SrcTop; - - /* - * Allocate an offscreen buffer for the entire source, even though only a - * subset of the source will be copied into it. - */ - DstPitch = /* bytes */ - (DstWidth + DstWidth + 15) & ~15; - DstSize = /* pixels */ - ((DstPitch * DstHeight) + pATI->AdjustDepth - 1) / pATI->AdjustDepth; - - pATI->pXVBuffer = ATIResizeOffscreenLinear(pScreen, pATI->pXVBuffer, - (pATI->DoubleBuffer + 1) * DstSize); - - if (!pATI->pXVBuffer) - { - if (!pATI->DoubleBuffer) - return BadAlloc; - - pATI->pXVBuffer = - ATIResizeOffscreenLinear(pScreen, pATI->pXVBuffer, DstSize); - - if (!pATI->pXVBuffer) - return BadAlloc; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Video image double-buffering downgraded to single-buffering\n due" - " to insufficient video memory.\n"); - pATI->DoubleBuffer = pATI->CurrentBuffer = 0; - } - else - { - /* Possibly switch buffers */ - pATI->CurrentBuffer = pATI->DoubleBuffer - pATI->CurrentBuffer; - } - - /* Synchronise video memory accesses */ - ATIMach64Sync(pScreenInfo); - - Offset = (pATI->pXVBuffer->offset * pATI->AdjustDepth) + - (pATI->CurrentBuffer * DstSize * pATI->AdjustDepth); - pDst = pATI->pMemoryLE; - pDst += Offset; - - switch (ImageID) - { - case FOURCC_YV12: - case FOURCC_I420: - Left = (SrcX1 >> 16) & ~1; - Right = ((SrcX2 + 0x1FFFF) >> 16) & ~1; - Top = (SrcY1 >> 16) & ~1; - Bottom = ((SrcY2 + 0x1FFFF) >> 16) & ~1; - - if ((Right < Width) && ((SrcX1 & 0x1FFFF) <= (SrcX2 & 0x1FFFF))) - Right += 2; - if ((Bottom < Height) && ((SrcY1 & 0x1FFFF) <= (SrcY2 & 0x1FFFF))) - Bottom += 2; - - nPixel = Right - Left; - nLine = Bottom - Top; - - SrcPitch = (Width + 3) & ~3; - OffsetV = SrcPitch * Height; - SrcPitchUV = ((Width >> 1) + 3) & ~3; - OffsetU = ((Height >> 1) * SrcPitchUV) + OffsetV; - - tmp = ((Top >> 1) * SrcPitchUV) + (Left >> 1); - OffsetV += tmp; - OffsetU += tmp; - - if (ImageID == FOURCC_I420) - { - tmp = OffsetV; - OffsetV = OffsetU; - OffsetU = tmp; - } - - pDst += ((Top - SrcTop) * DstPitch) + ((Left - SrcLeft) << 1); - - xf86XVCopyYUV12ToPacked(Buffer + (Top * SrcPitch) + Left, - Buffer + OffsetV, Buffer + OffsetU, pDst, SrcPitch, SrcPitchUV, - DstPitch, nLine, nPixel); - break; - - case FOURCC_UYVY: - case FOURCC_YUY2: - default: - Left = (SrcX1 >> 16) & ~1; - Right = ((SrcX2 + 0x1FFFF) >> 16) & ~1; - Top = SrcY1 >> 16; - Bottom = (SrcY2 + 0x0FFFF) >> 16; - - if ((Right < Width) && ((SrcX1 & 0x1FFFF) <= (SrcX2 & 0x1FFFF))) - Right += 2; - if ((Bottom < Height) && ((SrcY1 & 0x0FFFF) <= (SrcY2 & 0x0FFFF))) - Bottom++; - - nPixel = Right - Left; - nLine = Bottom - Top; - - SrcPitch = Width << 1; - Buffer += (Top * SrcPitch) + (Left << 1); - pDst += ((Top - SrcTop) * DstPitch) + ((Left - SrcLeft) << 1); - - xf86XVCopyPacked(Buffer, pDst, SrcPitch, DstPitch, nLine, nPixel); - break; - } - - if (!REGION_EQUAL(pScreen, &pATI->VideoClip, pClip)) - { - REGION_COPY(pScreen, &pATI->VideoClip, pClip); - if (pATI->AutoPaint) - xf86XVFillKeyHelper(pScreen, pATI->NewHW.overlay_graphics_key_clr, - pClip); - } - - ATIMach64DisplayVideo(pScreenInfo, pATI, &DstBox, ImageID, - Offset, DstPitch / 2, SrcW, SrcH, DstW, DstH, DstWidth, DstHeight); - - return Success; -} - -/* - * ATIMach64AllocateSurface -- - * - * This function allocates an offscreen buffer (called a "surface") for use by - * an external driver such as 'v4l'. - */ -static int -ATIMach64AllocateSurface -( - ScrnInfoPtr pScreenInfo, - int ImageID, - unsigned short Width, - unsigned short Height, - XF86SurfacePtr pSurface -) -{ - ScreenPtr pScreen; - ATIPtr pATI = ATIPTR(pScreenInfo); - - if (pATI->ActiveSurface) - return BadAlloc; - - if ((Height <= 0) || (Height > 2048) || (Width <= 0) || (Width > 720) || - ((Width > 384) && (pATI->Chip < ATI_CHIP_264VTB))) - return BadValue; - - Width = (Width + 1) & ~1; - pATI->SurfacePitch = ((Width << 1) + 15) & ~15; - - pScreen = pScreenInfo->pScreen; - - pATI->pXVBuffer = ATIResizeOffscreenLinear(pScreen, pATI->pXVBuffer, - ((Height * pATI->SurfacePitch) + pATI->AdjustDepth - 1) / - pATI->AdjustDepth); - if (!pATI->pXVBuffer) - return BadAlloc; - - pATI->SurfaceOffset = pATI->pXVBuffer->offset * pATI->AdjustDepth; - - pSurface->pScrn = pScreenInfo; - pSurface->id = ImageID; - pSurface->width = Width; - pSurface->height = Height; - pSurface->pitches = &pATI->SurfacePitch; - pSurface->offsets = &pATI->SurfaceOffset; - pSurface->devPrivate.ptr = pATI; - - /* Stop the video */ - outf(OVERLAY_SCALE_CNTL, SCALE_EN); - REGION_EMPTY(pScreen, &pATI->VideoClip); - pATI->ActiveSurface = TRUE; - - return Success; -} - -/* - * ATIMach64FreeSurface -- - * - * This function called to free a surface's offscreen buffer. - */ -static int -ATIMach64FreeSurface -( - XF86SurfacePtr pSurface -) -{ - ATIPtr pATI = pSurface->devPrivate.ptr; - - if (!pATI->ActiveSurface) - return Success; - - outf(OVERLAY_SCALE_CNTL, SCALE_EN); - pATI->pXVBuffer = ATIResizeOffscreenLinear(pSurface->pScrn->pScreen, - pATI->pXVBuffer, 0); - pATI->ActiveSurface = FALSE; - - return Success; -} - -/* - * ATIMach64DisplaySurface -- - * - * This function is called to display a video surface. - */ -static int -ATIMach64DisplaySurface -( - XF86SurfacePtr pSurface, - short SrcX, - short SrcY, - short DstX, - short DstY, - short SrcW, - short SrcH, - short DstW, - short DstH, - RegionPtr pClip -) -{ - ATIPtr pATI = pSurface->devPrivate.ptr; - ScrnInfoPtr pScreenInfo; - int ImageID; - short Width, Height; - BoxRec DstBox; - INT32 SrcX1, SrcX2, SrcY1, SrcY2; - int SrcLeft, SrcTop, SrcPitch, Offset; - - if (!pATI->ActiveSurface) - return Success; - - pScreenInfo = pSurface->pScrn; - ImageID = pSurface->id; - Width = pSurface->width; - Height = pSurface->height; - - if (!ATIMach64ClipVideo(pScreenInfo, pATI, ImageID, - SrcX, SrcY, SrcW, SrcH, - DstX, DstY, &DstW, &DstH, - Width, Height, pClip, &DstBox, - &SrcX1, &SrcX2, &SrcY1, &SrcY2, - &SrcLeft, &SrcTop)) - return Success; - - xf86XVFillKeyHelper(pScreenInfo->pScreen, - pATI->NewHW.overlay_graphics_key_clr, pClip); - - SrcPitch = pSurface->pitches[0]; - Offset = pSurface->offsets[0] + (SrcTop * SrcPitch) + (SrcLeft << 1); - ATIMach64DisplayVideo(pScreenInfo, pATI, &DstBox, ImageID, - Offset, SrcPitch, SrcW, SrcH, DstW, DstH, Width, Height); - - return Success; -} - -/* - * ATIMach64StopSurface -- - * - * This function is called to stop the overlaid display of a video surface. - */ -static int -ATIMach64StopSurface -( - XF86SurfacePtr pSurface -) -{ - ATIPtr pATI = pSurface->devPrivate.ptr; - - if (pATI->ActiveSurface) - outf(OVERLAY_SCALE_CNTL, SCALE_EN); - - return Success; -} - -/* - * ATIMach64GetSurfaceAttribute -- - * - * Retrieve the value of an XVideo attribute. - */ -static int -ATIMach64GetSurfaceAttribute -( - ScrnInfoPtr pScreenInfo, - Atom AttributeID, - INT32 *Value -) -{ - return ATIMach64GetPortAttribute(pScreenInfo, AttributeID, Value, - ATIPTR(pScreenInfo)); -} - -/* - * ATIMach64SetSurfaceAttribute - * - * Set the value of an XVideo attribute. - */ -static int -ATIMach64SetSurfaceAttribute -( - ScrnInfoPtr pScreenInfo, - Atom AttributeID, - INT32 Value -) -{ - return ATIMach64SetPortAttribute(pScreenInfo, AttributeID, Value, - ATIPTR(pScreenInfo)); -} - -/* XVideo surface registration data */ -static XF86OffscreenImageRec ATIMach64Surface_A[] = -{ - { - &ATIMach64Image[0], /* YUY2 */ - VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT, - ATIMach64AllocateSurface, - ATIMach64FreeSurface, - ATIMach64DisplaySurface, - ATIMach64StopSurface, - ATIMach64GetSurfaceAttribute, - ATIMach64SetSurfaceAttribute, - 384, 2048, - nATIMach64Attribute - 5, /* No double-buffering */ - ATIMach64Attribute + 4 /* No saturation nor brightness */ - }, - { - &ATIMach64Image[1], /* UYVY */ - VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT, - ATIMach64AllocateSurface, - ATIMach64FreeSurface, - ATIMach64DisplaySurface, - ATIMach64StopSurface, - ATIMach64GetSurfaceAttribute, - ATIMach64SetSurfaceAttribute, - 384, 2048, - nATIMach64Attribute - 5, /* No double-buffering */ - ATIMach64Attribute + 4 /* No saturation nor brightness */ - } -}; -#define nATIMach64Surface_A NumberOf(ATIMach64Surface_A) - -static XF86OffscreenImageRec ATIMach64Surface_B[] = -{ - { - &ATIMach64Image[0], /* YUY2 */ - VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT, - ATIMach64AllocateSurface, - ATIMach64FreeSurface, - ATIMach64DisplaySurface, - ATIMach64StopSurface, - ATIMach64GetSurfaceAttribute, - ATIMach64SetSurfaceAttribute, - 720, 2048, - nATIMach64Attribute - 5, /* No double-buffering */ - ATIMach64Attribute + 4 /* No saturation nor brightness */ - }, - { - &ATIMach64Image[1], /* UYVY */ - VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT, - ATIMach64AllocateSurface, - ATIMach64FreeSurface, - ATIMach64DisplaySurface, - ATIMach64StopSurface, - ATIMach64GetSurfaceAttribute, - ATIMach64SetSurfaceAttribute, - 720, 2048, - nATIMach64Attribute - 5, /* No double-buffering */ - ATIMach64Attribute + 4 /* No saturation nor brightness */ - } -}; -#define nATIMach64Surface_B NumberOf(ATIMach64Surface_B) - -static XF86OffscreenImageRec ATIMach64Surface_C[] = -{ - { - &ATIMach64Image[0], /* YUY2 */ - VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT, - ATIMach64AllocateSurface, - ATIMach64FreeSurface, - ATIMach64DisplaySurface, - ATIMach64StopSurface, - ATIMach64GetSurfaceAttribute, - ATIMach64SetSurfaceAttribute, - 720, 2048, - nATIMach64Attribute - 1, /* No double-buffering */ - ATIMach64Attribute - }, - { - &ATIMach64Image[1], /* UYVY */ - VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT, - ATIMach64AllocateSurface, - ATIMach64FreeSurface, - ATIMach64DisplaySurface, - ATIMach64StopSurface, - ATIMach64GetSurfaceAttribute, - ATIMach64SetSurfaceAttribute, - 720, 2048, - nATIMach64Attribute - 1, /* No double-buffering */ - ATIMach64Attribute - } -}; -#define nATIMach64Surface_C NumberOf(ATIMach64Surface_C) - -/* - * ATIMach64XVInitialiseAdaptor -- - * - * This function is called to make a Mach64's hardware overlay support - * available as an XVideo adaptor. - */ -int -ATIMach64XVInitialiseAdaptor -( - ScreenPtr pScreen, - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - XF86VideoAdaptorPtr **pppAdaptor -) -{ - XF86VideoAdaptorPtr pAdaptor; - int Index; - - if (!pATI->Block1Base) - return 0; - - if (!(pAdaptor = xf86XVAllocateVideoAdaptorRec(pScreenInfo))) - return 0; - - *pppAdaptor = xnfalloc(sizeof(pAdaptor)); - **pppAdaptor = pAdaptor; - - pAdaptor->nPorts = 1; - pAdaptor->pPortPrivates = pATI->XVPortPrivate; - pATI->XVPortPrivate[0].ptr = pATI; - - pAdaptor->type = XvInputMask | XvImageMask | XvWindowMask; - pAdaptor->flags = VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT; - pAdaptor->name = "ATI Mach64 Back-end Overlay Scaler"; - - if (pATI->Chip < ATI_CHIP_264VTB) - { - pAdaptor->nEncodings = nATIMach64VideoEncoding_A; - pAdaptor->pEncodings = ATIMach64VideoEncoding_A; - } - else - { - pAdaptor->nEncodings = nATIMach64VideoEncoding_B; - pAdaptor->pEncodings = ATIMach64VideoEncoding_B; - } - - pAdaptor->nFormats = nATIMach64VideoFormat; - pAdaptor->pFormats = ATIMach64VideoFormat; - - pAdaptor->nAttributes = nATIMach64Attribute; - pAdaptor->pAttributes = ATIMach64Attribute; - - if (pATI->Chip < ATI_CHIP_264GTPRO) - { - /* Older controllers don't have brightness or saturation controls */ - pAdaptor->nAttributes -= 4; - pAdaptor->pAttributes += 4; - } - - pAdaptor->nImages = nATIMach64Image; - pAdaptor->pImages = ATIMach64Image; - - pAdaptor->StopVideo = ATIMach64StopVideo; - pAdaptor->SetPortAttribute = ATIMach64SetPortAttribute; - pAdaptor->GetPortAttribute = ATIMach64GetPortAttribute; - pAdaptor->QueryBestSize = ATIMach64QueryBestSize; - pAdaptor->PutImage = ATIMach64PutImage; - pAdaptor->QueryImageAttributes = ATIMach64QueryImageAttributes; - - REGION_INIT(pScreen, &pATI->VideoClip, NullBox, 0); - pATI->ActiveSurface = FALSE; - - if (ATIMach64XVAtomGeneration != serverGeneration) - { - /* Refresh static data */ - ATIMach64XVAtomGeneration = serverGeneration; - - Index = nATIMach64Attribute - pAdaptor->nAttributes; - for (; Index < nATIMach64Attribute; Index++) - ATIMach64AttributeInfo[Index].AttributeID = - MAKE_ATOM(ATIMach64Attribute[Index].name); - } - - ATIMach64SetDefaultAttributes(pATI, 0); - - if (pATI->Chip < ATI_CHIP_264VTB) - { - xf86XVRegisterOffscreenImages(pScreen, - ATIMach64Surface_A, nATIMach64Surface_A); - } - else if (pATI->Chip < ATI_CHIP_264GTPRO) - { - xf86XVRegisterOffscreenImages(pScreen, - ATIMach64Surface_B, nATIMach64Surface_B); - } - else - { - xf86XVRegisterOffscreenImages(pScreen, - ATIMach64Surface_C, nATIMach64Surface_C); - } - - return 1; -} - -/* - * ATIMach64CloseXVideo -- - * - * This function is called during screen termination to clean up after - * initialisation of Mach64 XVideo support. - */ -void -ATIMach64CloseXVideo -( - ScreenPtr pScreen, - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - ATIMach64StopVideo(pScreenInfo, pATI, TRUE); - - REGION_UNINIT(pScreen, &pATI->VideoClip); -} diff --git a/src/atimach64xv.h b/src/atimach64xv.h deleted file mode 100644 index 8d5c07c9..00000000 --- a/src/atimach64xv.h +++ /dev/null @@ -1,40 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimach64xv.h,v 1.1 2003/04/23 21:51:29 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIMACH64XV_H___ -#define ___ATIMACH64XV_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" -#include "xf86xv.h" - -extern int ATIMach64XVInitialiseAdaptor - FunctionPrototype((ScreenPtr, ScrnInfoPtr, ATIPtr, - XF86VideoAdaptorPtr **)); - -extern void ATIMach64CloseXVideo - FunctionPrototype((ScreenPtr, ScrnInfoPtr, ATIPtr)); - -#endif /* ___ATIMACH64XV_H___ */ diff --git a/src/atimisc.c b/src/atimisc.c deleted file mode 100644 index 61801eb7..00000000 --- a/src/atimisc.c +++ /dev/null @@ -1,115 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimisc.c,v 1.7 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifdef XFree86LOADER - -#include "ati.h" -#include "atiload.h" -#include "ativersion.h" - -/* Module loader interface for subsidiary driver module */ - -static XF86ModuleVersionInfo ATIVersionRec = -{ - "atimisc", - MODULEVENDORSTRING, - MODINFOSTRING1, - MODINFOSTRING2, - XF86_VERSION_CURRENT, - ATI_VERSION_MAJOR, ATI_VERSION_MINOR, ATI_VERSION_PATCH, - ABI_CLASS_VIDEODRV, - ABI_VIDEODRV_VERSION, - MOD_CLASS_VIDEODRV, - {0, 0, 0, 0} -}; - -/* - * ATISetup -- - * - * This function is called every time the module is loaded. - */ -static pointer -ATISetup -( - pointer Module, - pointer Options, - int *ErrorMajor, - int *ErrorMinor -) -{ - static Bool Inited = FALSE; - - if (!Inited) - { - /* Ensure main driver module is loaded, but not as a submodule */ - if (!xf86ServerIsOnlyDetecting() && !LoaderSymbol(ATI_NAME)) - xf86LoadOneModule(ATI_DRIVER_NAME, Options); - - /* - * Tell loader about symbols from other modules that this module might - * refer to. - */ - xf86LoaderRefSymLists( - ATIint10Symbols, - ATIddcSymbols, - ATIvbeSymbols, - -#ifndef AVOID_CPIO - - ATIxf1bppSymbols, - ATIxf4bppSymbols, - -#endif /* AVOID_CPIO */ - -#ifdef XF86DRI - - ATIdrmSymbols, - ATIdriSymbols, - -#endif /* XF86DRI */ - - ATIfbSymbols, - ATIshadowfbSymbols, - ATIxaaSymbols, - ATIramdacSymbols, - ATIi2cSymbols, - NULL); - - Inited = TRUE; - } - - return (pointer)TRUE; -} - -/* The following record must be called atimiscModuleData */ -XF86ModuleData atimiscModuleData = -{ - &ATIVersionRec, - ATISetup, - NULL -}; - -#endif /* XFree86LOADER */ diff --git a/src/atimode.c b/src/atimode.c deleted file mode 100644 index 02cf3193..00000000 --- a/src/atimode.c +++ /dev/null @@ -1,1185 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimode.c,v 1.17 2003/04/23 21:51:29 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atichip.h" -#include "atidac.h" -#include "atidsp.h" -#include "atimach64.h" -#include "atimach64io.h" -#include "atimode.h" -#include "atiprint.h" -#include "atirgb514.h" -#include "ativga.h" -#include "atiwonder.h" -#include "atiwonderio.h" - -#ifndef AVOID_CPIO - -/* - * ATICopyVGAMemory -- - * - * This function is called to copy one or all banks of a VGA plane. - */ -static void -ATICopyVGAMemory -( - ATIPtr pATI, - ATIHWPtr pATIHW, - pointer *saveptr, - pointer *from, - pointer *to -) -{ - unsigned int iBank; - - for (iBank = 0; iBank < pATIHW->nBank; iBank++) - { - (*pATIHW->SetBank)(pATI, iBank); - (void)memcpy(*to, *from, 0x00010000U); - *saveptr = (char *)(*saveptr) + 0x00010000U; - } -} - -/* - * ATISwap -- - * - * This function saves/restores video memory contents during video mode - * switches. - */ -static void -ATISwap -( - int iScreen, - ATIPtr pATI, - ATIHWPtr pATIHW, - Bool ToFB -) -{ - pointer save, *from, *to; - unsigned int iPlane = 0, PlaneMask = 1; - CARD8 seq2, seq4, gra1, gra3, gra4, gra5, gra6, gra8; - - /* - * This is only done for non-accelerator modes. If the video state on - * server entry was an accelerator mode, the application that relinquished - * the console had better do the Right Thing (tm) anyway by saving and - * restoring its own video memory contents. - */ - if (pATIHW->crtc != ATI_CRTC_VGA) - return; - - if (ToFB) - { - if (!pATIHW->frame_buffer) - return; - - from = &save; - to = &pATI->pBank; - } - else - { - /* Allocate the memory */ - if (!pATIHW->frame_buffer) - { - pATIHW->frame_buffer = - (pointer)xalloc(pATIHW->nBank * pATIHW->nPlane * 0x00010000U); - if (!pATIHW->frame_buffer) - { - xf86DrvMsg(iScreen, X_WARNING, - "Temporary frame buffer could not be allocated.\n"); - return; - } - } - - from = &pATI->pBank; - to = &save; - } - - /* Turn off screen */ - ATIVGASaveScreen(pATI, SCREEN_SAVER_ON); - - /* Save register values to be modified */ - seq2 = GetReg(SEQX, 0x02U); - seq4 = GetReg(SEQX, 0x04U); - gra1 = GetReg(GRAX, 0x01U); - gra3 = GetReg(GRAX, 0x03U); - gra4 = GetReg(GRAX, 0x04U); - gra5 = GetReg(GRAX, 0x05U); - gra6 = GetReg(GRAX, 0x06U); - gra8 = GetReg(GRAX, 0x08U); - - save = pATIHW->frame_buffer; - - /* Temporarily normalise the mode */ - if (gra1 != 0x00U) - PutReg(GRAX, 0x01U, 0x00U); - if (gra3 != 0x00U) - PutReg(GRAX, 0x03U, 0x00U); - if (gra6 != 0x05U) - PutReg(GRAX, 0x06U, 0x05U); - if (gra8 != 0xFFU) - PutReg(GRAX, 0x08U, 0xFFU); - - if (seq4 & 0x08U) - { - /* Setup packed mode memory */ - if (seq2 != 0x0FU) - PutReg(SEQX, 0x02U, 0x0FU); - if (seq4 != 0x0AU) - PutReg(SEQX, 0x04U, 0x0AU); - if (pATI->Chip < ATI_CHIP_264CT) - { - if (gra5 != 0x00U) - PutReg(GRAX, 0x05U, 0x00U); - } - else - { - if (gra5 != 0x40U) - PutReg(GRAX, 0x05U, 0x40U); - } - - ATICopyVGAMemory(pATI, pATIHW, &save, from, to); - - if (seq2 != 0x0FU) - PutReg(SEQX, 0x02U, seq2); - if (seq4 != 0x0AU) - PutReg(SEQX, 0x04U, seq4); - if (pATI->Chip < ATI_CHIP_264CT) - { - if (gra5 != 0x00U) - PutReg(GRAX, 0x05U, gra5); - } - else - { - if (gra5 != 0x40U) - PutReg(GRAX, 0x05U, gra5); - } - } - else - { - gra4 = GetReg(GRAX, 0x04U); - - /* Setup planar mode memory */ - if (seq4 != 0x06U) - PutReg(SEQX, 0x04U, 0x06U); - if (gra5 != 0x00U) - PutReg(GRAX, 0x05U, 0x00U); - - for (; iPlane < pATIHW->nPlane; iPlane++) - { - PutReg(SEQX, 0x02U, PlaneMask); - PutReg(GRAX, 0x04U, iPlane); - ATICopyVGAMemory(pATI, pATIHW, &save, from, to); - PlaneMask <<= 1; - } - - PutReg(SEQX, 0x02U, seq2); - if (seq4 != 0x06U) - PutReg(SEQX, 0x04U, seq4); - PutReg(GRAX, 0x04U, gra4); - if (gra5 != 0x00U) - PutReg(GRAX, 0x05U, gra5); - } - - /* Restore registers */ - if (gra1 != 0x00U) - PutReg(GRAX, 0x01U, gra1); - if (gra3 != 0x00U) - PutReg(GRAX, 0x03U, gra3); - if (gra6 != 0x05U) - PutReg(GRAX, 0x06U, gra6); - if (gra8 != 0xFFU) - PutReg(GRAX, 0x08U, gra8); - - /* Back to bank 0 */ - (*pATIHW->SetBank)(pATI, 0); - - /* - * If restoring video memory for a server video mode, free the frame buffer - * save area. - */ - if (ToFB && (pATIHW == &pATI->NewHW)) - { - xfree(pATIHW->frame_buffer); - pATIHW->frame_buffer = NULL; - } -} - -#endif /* AVOID_CPIO */ - -/* - * ATIModePreInit -- - * - * This function initialises an ATIHWRec with information common to all video - * states generated by the driver. - */ -void -ATIModePreInit -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - CARD32 lcd_index; - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - /* Fill in VGA data */ - ATIVGAPreInit(pATI, pATIHW); - - /* Fill in VGA Wonder data */ - if (pATI->CPIO_VGAWonder) - ATIVGAWonderPreInit(pATI, pATIHW); - } - - if (pATI->Chip >= ATI_CHIP_88800GXC) - -#endif /* AVOID_CPIO */ - - { - /* Fill in Mach64 data */ - ATIMach64PreInit(pScreenInfo, pATI, pATIHW); - - if (pATI->Chip >= ATI_CHIP_264CT) - { - /* Ensure proper VCLK source */ - pATIHW->pll_vclk_cntl = ATIMach64GetPLLReg(PLL_VCLK_CNTL) | - (PLL_VCLK_SRC_SEL | PLL_VCLK_RESET); - - /* Set provisional values for other PLL registers */ - pATIHW->pll_vclk_post_div = ATIMach64GetPLLReg(PLL_VCLK_POST_DIV); - pATIHW->pll_vclk0_fb_div = ATIMach64GetPLLReg(PLL_VCLK0_FB_DIV); - pATIHW->pll_vclk1_fb_div = ATIMach64GetPLLReg(PLL_VCLK1_FB_DIV); - pATIHW->pll_vclk2_fb_div = ATIMach64GetPLLReg(PLL_VCLK2_FB_DIV); - pATIHW->pll_vclk3_fb_div = ATIMach64GetPLLReg(PLL_VCLK3_FB_DIV); - pATIHW->pll_xclk_cntl = ATIMach64GetPLLReg(PLL_XCLK_CNTL); - - /* For now disable extended reference and feedback dividers */ - if (pATI->Chip >= ATI_CHIP_264LT) - pATIHW->pll_ext_vpll_cntl = - ATIMach64GetPLLReg(PLL_EXT_VPLL_CNTL) & - ~(PLL_EXT_VPLL_EN | PLL_EXT_VPLL_VGA_EN | - PLL_EXT_VPLL_INSYNC); - - /* Initialise CRTC data for LCD panels */ - if (pATI->LCDPanelID >= 0) - { - if (pATI->Chip == ATI_CHIP_264LT) - { - pATIHW->lcd_gen_ctrl = inr(LCD_GEN_CTRL); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - lcd_index = inr(LCD_INDEX); - pATIHW->lcd_index = lcd_index & - ~(LCD_REG_INDEX | LCD_DISPLAY_DIS | LCD_SRC_SEL | - LCD_CRTC2_DISPLAY_DIS); - if (pATI->Chip != ATI_CHIP_264XL) - pATIHW->lcd_index |= LCD_CRTC2_DISPLAY_DIS; - pATIHW->config_panel = - ATIMach64GetLCDReg(LCD_CONFIG_PANEL) | - DONT_SHADOW_HEND; - pATIHW->lcd_gen_ctrl = - ATIMach64GetLCDReg(LCD_GEN_CNTL) & ~CRTC_RW_SELECT; - outr(LCD_INDEX, lcd_index); - } - - pATIHW->lcd_gen_ctrl &= - ~(HORZ_DIVBY2_EN | DIS_HOR_CRT_DIVBY2 | MCLK_PM_EN | - VCLK_DAC_PM_EN | USE_SHADOWED_VEND | - USE_SHADOWED_ROWCUR | SHADOW_EN | SHADOW_RW_EN); - pATIHW->lcd_gen_ctrl |= DONT_SHADOW_VPAR | LOCK_8DOT; - - if (!pATI->OptionPanelDisplay) - { - /* - * Use primary CRTC to drive the CRT. Turn off panel - * interface. - */ - pATIHW->lcd_gen_ctrl &= ~LCD_ON; - pATIHW->lcd_gen_ctrl |= CRT_ON; - } - else - { - /* Use primary CRTC to drive the panel */ - pATIHW->lcd_gen_ctrl |= LCD_ON; - - /* If requested, also force CRT on */ - if (pATI->OptionCRTDisplay) - pATIHW->lcd_gen_ctrl |= CRT_ON; - } - } - } - else if (pATI->DAC == ATI_DAC_IBMRGB514) - { - ATIRGB514PreInit(pATI, pATIHW); - } - } - - /* Set RAMDAC data */ - ATIDACPreInit(pScreenInfo, pATI, pATIHW); -} - -/* - * ATIModeSave -- - * - * This function saves the current video state. - */ -void -ATIModeSave -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - -#ifndef AVOID_CPIO - - int Index; - - /* Get bank to bank 0 */ - (*pATIHW->SetBank)(pATI, 0); - -#endif /* AVOID_CPIO */ - - /* Save clock data */ - ATIClockSave(pScreenInfo, pATI, pATIHW); - - if (pATI->Chip >= ATI_CHIP_264CT) - { - pATIHW->pll_vclk_cntl = ATIMach64GetPLLReg(PLL_VCLK_CNTL) | - PLL_VCLK_RESET; - pATIHW->pll_vclk_post_div = ATIMach64GetPLLReg(PLL_VCLK_POST_DIV); - pATIHW->pll_vclk0_fb_div = ATIMach64GetPLLReg(PLL_VCLK0_FB_DIV); - pATIHW->pll_vclk1_fb_div = ATIMach64GetPLLReg(PLL_VCLK1_FB_DIV); - pATIHW->pll_vclk2_fb_div = ATIMach64GetPLLReg(PLL_VCLK2_FB_DIV); - pATIHW->pll_vclk3_fb_div = ATIMach64GetPLLReg(PLL_VCLK3_FB_DIV); - pATIHW->pll_xclk_cntl = ATIMach64GetPLLReg(PLL_XCLK_CNTL); - if (pATI->Chip >= ATI_CHIP_264LT) - pATIHW->pll_ext_vpll_cntl = ATIMach64GetPLLReg(PLL_EXT_VPLL_CNTL); - - /* Save LCD registers */ - if (pATI->LCDPanelID >= 0) - { - if (pATI->Chip == ATI_CHIP_264LT) - { - pATIHW->horz_stretching = inr(HORZ_STRETCHING); - pATIHW->vert_stretching = inr(VERT_STRETCHING); - pATIHW->lcd_gen_ctrl = inr(LCD_GEN_CTRL); - - /* Set up to save non-shadow registers */ - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl & ~SHADOW_RW_EN); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - pATIHW->lcd_index = inr(LCD_INDEX); - pATIHW->config_panel = ATIMach64GetLCDReg(LCD_CONFIG_PANEL); - pATIHW->lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - pATIHW->horz_stretching = - ATIMach64GetLCDReg(LCD_HORZ_STRETCHING); - pATIHW->vert_stretching = - ATIMach64GetLCDReg(LCD_VERT_STRETCHING); - pATIHW->ext_vert_stretch = - ATIMach64GetLCDReg(LCD_EXT_VERT_STRETCH); - - /* Set up to save non-shadow registers */ - ATIMach64PutLCDReg(LCD_GEN_CNTL, - pATIHW->lcd_gen_ctrl & ~(CRTC_RW_SELECT | SHADOW_RW_EN)); - } - } - } - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - /* Save VGA data */ - ATIVGASave(pATI, pATIHW); - - /* Save VGA Wonder data */ - if (pATI->CPIO_VGAWonder) - ATIVGAWonderSave(pATI, pATIHW); - } - - if (pATI->Chip >= ATI_CHIP_88800GXC) - -#endif /* AVOID_CPIO */ - - { - /* Save Mach64 data */ - ATIMach64Save(pATI, pATIHW); - - if (pATI->Chip >= ATI_CHIP_264VTB) - { - /* Save DSP data */ - ATIDSPSave(pATI, pATIHW); - - if (pATI->LCDPanelID >= 0) - { - /* Switch to shadow registers */ - if (pATI->Chip == ATI_CHIP_264LT) - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl | SHADOW_RW_EN); - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - ATIMach64PutLCDReg(LCD_GEN_CNTL, - (pATIHW->lcd_gen_ctrl & ~CRTC_RW_SELECT) | - SHADOW_RW_EN); - -#ifndef AVOID_CPIO - - /* Save shadow VGA CRTC registers */ - for (Index = 0; - Index < NumberOf(pATIHW->shadow_vga); - Index++) - pATIHW->shadow_vga[Index] = - GetReg(CRTX(pATI->CPIO_VGABase), Index); - -#endif /* AVOID_CPIO */ - - /* Save shadow Mach64 CRTC registers */ - pATIHW->shadow_h_total_disp = inr(CRTC_H_TOTAL_DISP); - pATIHW->shadow_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID); - pATIHW->shadow_v_total_disp = inr(CRTC_V_TOTAL_DISP); - pATIHW->shadow_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID); - - /* Restore CRTC selection and shadow state */ - if (pATI->Chip == ATI_CHIP_264LT) - { - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - ATIMach64PutLCDReg(LCD_GEN_CNTL, pATIHW->lcd_gen_ctrl); - outr(LCD_INDEX, pATIHW->lcd_index); - } - } - } - else if (pATI->DAC == ATI_DAC_IBMRGB514) - ATIRGB514Save(pATI, pATIHW); - } - -#ifndef AVOID_CPIO - - /* - * For some unknown reason, CLKDIV2 needs to be turned off to save the - * DAC's LUT reliably on VGA Wonder VLB adapters. - */ - if ((pATI->Adapter == ATI_ADAPTER_NONISA) && (pATIHW->seq[1] & 0x08U)) - PutReg(SEQX, 0x01U, pATIHW->seq[1] & ~0x08U); - -#endif /* AVOID_CPIO */ - - /* Save RAMDAC state */ - ATIDACSave(pATI, pATIHW); - -#ifndef AVOID_CPIO - - if ((pATI->Adapter == ATI_ADAPTER_NONISA) && (pATIHW->seq[1] & 0x08U)) - PutReg(SEQX, 0x01U, pATIHW->seq[1]); - -#endif /* AVOID_CPIO */ - - /* - * The server has already saved video memory contents when switching out of - * its virtual console, so don't do it again. - */ - if (pATIHW != &pATI->NewHW) - { - pATIHW->FeedbackDivider = 0; /* Don't programme clock */ - -#ifndef AVOID_CPIO - - /* Save video memory */ - ATISwap(pScreenInfo->scrnIndex, pATI, pATIHW, FALSE); - -#endif /* AVOID_CPIO */ - - } - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - ATIVGASaveScreen(pATI, SCREEN_SAVER_OFF); /* Turn on screen */ - -#endif /* AVOID_CPIO */ - -} - -/* - * ATIModeCalculate -- - * - * This function fills in an ATIHWRec with all register values needed to enable - * a video state. It's important that this be done without modifying the - * current video state. - */ -Bool -ATIModeCalculate -( - int iScreen, - ATIPtr pATI, - ATIHWPtr pATIHW, - DisplayModePtr pMode -) -{ - CARD32 lcd_index; - int Index, ECPClock, MaxScalerClock; - - /* Clobber mode timings */ - if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0) && - !pMode->CrtcHAdjusted && !pMode->CrtcVAdjusted && - (!pATI->OptionLCDSync || (pMode->type & M_T_BUILTIN))) - { - int VScan; - - pMode->Clock = pATI->LCDClock; - pMode->Flags &= ~(V_DBLSCAN | V_INTERLACE | V_CLKDIV2); - - /* - * Use doublescanning or multiscanning to get around vertical blending - * limitations. - */ - VScan = pATI->LCDVertical / pMode->VDisplay; - switch (pATIHW->crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - if (VScan > 64) - VScan = 64; - pMode->VScan = VScan; - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - pMode->VScan = 0; - if (VScan <= 1) - break; - VScan = 2; - pMode->Flags |= V_DBLSCAN; - break; - - default: - break; - } - - pMode->HSyncStart = pMode->HDisplay + pATI->LCDHSyncStart; - pMode->HSyncEnd = pMode->HSyncStart + pATI->LCDHSyncWidth; - pMode->HTotal = pMode->HDisplay + pATI->LCDHBlankWidth; - - pMode->VSyncStart = pMode->VDisplay + - ATIDivide(pATI->LCDVSyncStart, VScan, 0, 0); - pMode->VSyncEnd = pMode->VSyncStart + - ATIDivide(pATI->LCDVSyncWidth, VScan, 0, 1); - pMode->VTotal = pMode->VDisplay + - ATIDivide(pATI->LCDVBlankWidth, VScan, 0, 0); - } - - switch (pATIHW->crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - /* Fill in VGA data */ - ATIVGACalculate(pATI, pATIHW, pMode); - - /* Fill in VGA Wonder data */ - if (pATI->CPIO_VGAWonder) - ATIVGAWonderCalculate(pATI, pATIHW, pMode); - - if (pATI->Chip >= ATI_CHIP_88800GXC) - { - if (pATI->Chip >= ATI_CHIP_264CT) - { - /* - * Selected bits of accelerator & VGA CRTC registers are - * actually copies of each other. - */ - pATIHW->crtc_h_total_disp = - SetBits(pMode->CrtcHTotal, CRTC_H_TOTAL) | - SetBits(pMode->CrtcHDisplay, CRTC_H_DISP); - pATIHW->crtc_h_sync_strt_wid = - SetBits(pMode->CrtcHSyncStart, CRTC_H_SYNC_STRT) | - SetBits(pMode->CrtcHSkew, CRTC_H_SYNC_DLY) | /* ? */ - SetBits(GetBits(pMode->CrtcHSyncStart, 0x0100U), - CRTC_H_SYNC_STRT_HI) | - SetBits(pMode->CrtcHSyncEnd, CRTC_H_SYNC_WID); - if (pMode->Flags & V_NHSYNC) - pATIHW->crtc_h_sync_strt_wid |= CRTC_H_SYNC_POL; - - pATIHW->crtc_v_total_disp = - SetBits(pMode->CrtcVTotal, CRTC_V_TOTAL) | - SetBits(pMode->CrtcVDisplay, CRTC_V_DISP); - pATIHW->crtc_v_sync_strt_wid = - SetBits(pMode->CrtcVSyncStart, CRTC_V_SYNC_STRT) | - SetBits(pMode->CrtcVSyncEnd, CRTC_V_SYNC_WID); - if (pMode->Flags & V_NVSYNC) - pATIHW->crtc_v_sync_strt_wid |= CRTC_V_SYNC_POL; - } - - pATIHW->crtc_gen_cntl = inr(CRTC_GEN_CNTL) & - ~(CRTC_DBL_SCAN_EN | CRTC_INTERLACE_EN | - CRTC_HSYNC_DIS | CRTC_VSYNC_DIS | CRTC_CSYNC_EN | - CRTC_PIX_BY_2_EN | CRTC_DISPLAY_DIS | - CRTC_VGA_XOVERSCAN | CRTC_PIX_WIDTH | - CRTC_BYTE_PIX_ORDER | CRTC_VGA_128KAP_PAGING | - CRTC_VFC_SYNC_TRISTATE | - CRTC_LOCK_REGS | /* Already off, but ... */ - CRTC_SYNC_TRISTATE | CRTC_EXT_DISP_EN | - CRTC_DISP_REQ_EN | CRTC_VGA_LINEAR | CRTC_VGA_TEXT_132 | - CRTC_CUR_B_TEST); - /* Some of these are not relevent, but that doesn't matter */ - switch (pATI->depth) - { - case 1: - pATIHW->crtc_gen_cntl |= - SetBits(PIX_WIDTH_1BPP, CRTC_PIX_WIDTH); - break; - - case 4: - pATIHW->crtc_gen_cntl |= - SetBits(PIX_WIDTH_4BPP, CRTC_PIX_WIDTH); - break; - - case 8: - pATIHW->crtc_gen_cntl |= - SetBits(PIX_WIDTH_8BPP, CRTC_PIX_WIDTH); - break; - - case 15: - pATIHW->crtc_gen_cntl |= - SetBits(PIX_WIDTH_15BPP, CRTC_PIX_WIDTH); - break; - - case 16: - pATIHW->crtc_gen_cntl |= - SetBits(PIX_WIDTH_16BPP, CRTC_PIX_WIDTH); - break; - - case 24: - if (pATI->bitsPerPixel == 24) - { - pATIHW->crtc_gen_cntl |= - SetBits(PIX_WIDTH_24BPP, CRTC_PIX_WIDTH); - break; - } - if (pATI->bitsPerPixel != 32) - break; - /* Fall through */ - - case 32: - pATIHW->crtc_gen_cntl |= - SetBits(PIX_WIDTH_32BPP, CRTC_PIX_WIDTH); - break; - - default: - break; - } -#if 0 /* This isn't needed, but is kept for reference */ - if (pMode->Flags & V_DBLSCAN) - pATIHW->crtc_gen_cntl |= CRTC_DBL_SCAN_EN; -#endif - if (pMode->Flags & V_INTERLACE) - pATIHW->crtc_gen_cntl |= CRTC_INTERLACE_EN; - if ((pMode->Flags & (V_CSYNC | V_PCSYNC)) || pATI->OptionCSync) - pATIHW->crtc_gen_cntl |= CRTC_CSYNC_EN; - if (pATI->depth <= 4) - pATIHW->crtc_gen_cntl |= CRTC_EN | CRTC_CNT_EN; - else - pATIHW->crtc_gen_cntl |= - CRTC_EN | CRTC_VGA_LINEAR | CRTC_CNT_EN; - } - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - /* Fill in Mach64 data */ - ATIMach64Calculate(pATI, pATIHW, pMode); - break; - - default: - break; - } - - /* Set up LCD register values */ - if (pATI->LCDPanelID >= 0) - { - int VDisplay = pMode->VDisplay; - - if (pMode->Flags & V_DBLSCAN) - VDisplay <<= 1; - if (pMode->VScan > 1) - VDisplay *= pMode->VScan; - if (pMode->Flags & V_INTERLACE) - VDisplay >>= 1; - - /* Ensure secondary CRTC is completely disabled */ - pATIHW->crtc_gen_cntl &= ~(CRTC2_EN | CRTC2_PIX_WIDTH); - - if (pATI->Chip == ATI_CHIP_264LT) - { - pATIHW->horz_stretching = inr(HORZ_STRETCHING); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - lcd_index = inr(LCD_INDEX); - pATIHW->horz_stretching = ATIMach64GetLCDReg(LCD_HORZ_STRETCHING); - pATIHW->ext_vert_stretch = - ATIMach64GetLCDReg(LCD_EXT_VERT_STRETCH) & - ~(AUTO_VERT_RATIO | VERT_STRETCH_MODE | VERT_STRETCH_RATIO3); - - /* - * Don't use vertical blending if the mode is too wide or not - * vertically stretched. - */ - if (pATI->OptionPanelDisplay && - (pMode->HDisplay <= pATI->LCDVBlendFIFOSize) && - (VDisplay < pATI->LCDVertical)) - pATIHW->ext_vert_stretch |= VERT_STRETCH_MODE; - - outr(LCD_INDEX, lcd_index); - } - - pATIHW->horz_stretching &= - ~(HORZ_STRETCH_RATIO | HORZ_STRETCH_LOOP | AUTO_HORZ_RATIO | - HORZ_STRETCH_MODE | HORZ_STRETCH_EN); - if (pATI->OptionPanelDisplay && - (pMode->HDisplay < pATI->LCDHorizontal)) - do - { - /* - * The horizontal blender misbehaves when HDisplay is less than a - * a certain threshold (440 for a 1024-wide panel). It doesn't - * stretch such modes enough. Use pixel replication instead of - * blending to stretch modes that can be made to exactly fit the - * panel width. The undocumented "NoLCDBlend" option allows the - * pixel-replicated mode to be slightly wider or narrower than the - * panel width. It also causes a mode that is exactly half as wide - * as the panel to be pixel-replicated, rather than blended. - */ - int HDisplay = pMode->HDisplay & ~7; - int nStretch = pATI->LCDHorizontal / HDisplay; - int Remainder = pATI->LCDHorizontal % HDisplay; - - if ((!Remainder && ((nStretch > 2) || !pATI->OptionBlend)) || - (((HDisplay * 16) / pATI->LCDHorizontal) < 7)) - { - static const char StretchLoops[] = {10, 12, 13, 15, 16}; - int horz_stretch_loop = -1, BestRemainder; - int Numerator = HDisplay, Denominator = pATI->LCDHorizontal; - - ATIReduceRatio(&Numerator, &Denominator); - - BestRemainder = (Numerator * 16) / Denominator; - Index = NumberOf(StretchLoops); - while (--Index >= 0) - { - Remainder = - ((Denominator - Numerator) * StretchLoops[Index]) % - Denominator; - if (Remainder < BestRemainder) - { - horz_stretch_loop = Index; - if (!(BestRemainder = Remainder)) - break; - } -#if 0 - /* - * Enabling this code allows the pixel-replicated mode to - * be slightly wider than the panel width. - */ - Remainder = Denominator - Remainder; - if (Remainder < BestRemainder) - { - horz_stretch_loop = Index; - BestRemainder = Remainder; - } -#endif - } - - if ((horz_stretch_loop >= 0) && - (!BestRemainder || !pATI->OptionBlend)) - { - int horz_stretch_ratio = 0, Accumulator = 0; - int reuse_previous = 1; - - Index = StretchLoops[horz_stretch_loop]; - - while (--Index >= 0) - { - if (Accumulator > 0) - horz_stretch_ratio |= reuse_previous; - else - Accumulator += Denominator; - Accumulator -= Numerator; - reuse_previous <<= 1; - } - - pATIHW->horz_stretching |= HORZ_STRETCH_EN | - SetBits(horz_stretch_loop, HORZ_STRETCH_LOOP) | - SetBits(horz_stretch_ratio, HORZ_STRETCH_RATIO); - break; /* Out of the do { ... } while (0) */ - } - } - - pATIHW->horz_stretching |= (HORZ_STRETCH_MODE | HORZ_STRETCH_EN) | - SetBits((HDisplay * (MaxBits(HORZ_STRETCH_BLEND) + 1)) / - pATI->LCDHorizontal, HORZ_STRETCH_BLEND); - } while (0); - - if (!pATI->OptionPanelDisplay || (VDisplay >= pATI->LCDVertical)) - { - pATIHW->vert_stretching = 0; - } - else - { - pATIHW->vert_stretching = (VERT_STRETCH_USE0 | VERT_STRETCH_EN) | - SetBits((VDisplay * (MaxBits(VERT_STRETCH_RATIO0) + 1)) / - pATI->LCDVertical, VERT_STRETCH_RATIO0); - } - -#ifndef AVOID_CPIO - - /* Copy non-shadow CRTC register values to the shadow set */ - for (Index = 0; Index < NumberOf(pATIHW->shadow_vga); Index++) - pATIHW->shadow_vga[Index] = pATIHW->crt[Index]; - -#endif /* AVOID_CPIO */ - - pATIHW->shadow_h_total_disp = pATIHW->crtc_h_total_disp; - pATIHW->shadow_h_sync_strt_wid = pATIHW->crtc_h_sync_strt_wid; - pATIHW->shadow_v_total_disp = pATIHW->crtc_v_total_disp; - pATIHW->shadow_v_sync_strt_wid = pATIHW->crtc_v_sync_strt_wid; - } - - /* Fill in clock data */ - if (!ATIClockCalculate(iScreen, pATI, pATIHW, pMode)) - return FALSE; - - /* Setup ECP clock divider */ - if (pATI->Chip >= ATI_CHIP_264VT) - { - if (pATI->Chip <= ATI_CHIP_264VT3) - MaxScalerClock = 80000; - else if (pATI->Chip <= ATI_CHIP_264GT2C) - MaxScalerClock = 100000; - else if (pATI->Chip == ATI_CHIP_264GTPRO) - MaxScalerClock = 125000; - else if (pATI->Chip <= ATI_CHIP_MOBILITY) - MaxScalerClock = 135000; - else - MaxScalerClock = 80000; /* Conservative */ - pATIHW->pll_vclk_cntl &= ~PLL_ECP_DIV; - /* XXX Don't do this for TVOut! */ - ECPClock = pMode->SynthClock; - for (Index = 0; (ECPClock > MaxScalerClock) && (Index < 2); Index++) - ECPClock >>= 1; - pATIHW->pll_vclk_cntl |= SetBits(Index, PLL_ECP_DIV); - } - else if (pATI->DAC == ATI_DAC_IBMRGB514) - { - ATIRGB514Calculate(pATI, pATIHW, pMode); - } - - return TRUE; -} - -/* - * ATIModeSet -- - * - * This function sets a video mode. It writes out all video state data that - * has been previously calculated or saved. - */ -void -ATIModeSet -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - -#ifndef AVOID_CPIO - - int Index; - - /* Get back to bank 0 */ - (*pATIHW->SetBank)(pATI, 0); - -#endif /* AVOID_CPIO */ - - if (pATI->Chip >= ATI_CHIP_88800GXC) - { - /* Stop CRTC */ - outr(CRTC_GEN_CNTL, - pATIHW->crtc_gen_cntl & ~(CRTC_EXT_DISP_EN | CRTC_EN)); - - if (pATI->Chip >= ATI_CHIP_264CT) - { - ATIMach64PutPLLReg(PLL_VCLK_CNTL, pATIHW->pll_vclk_cntl); - ATIMach64PutPLLReg(PLL_VCLK_POST_DIV, pATIHW->pll_vclk_post_div); - ATIMach64PutPLLReg(PLL_VCLK0_FB_DIV, pATIHW->pll_vclk0_fb_div); - ATIMach64PutPLLReg(PLL_VCLK1_FB_DIV, pATIHW->pll_vclk1_fb_div); - ATIMach64PutPLLReg(PLL_VCLK2_FB_DIV, pATIHW->pll_vclk2_fb_div); - ATIMach64PutPLLReg(PLL_VCLK3_FB_DIV, pATIHW->pll_vclk3_fb_div); - ATIMach64PutPLLReg(PLL_XCLK_CNTL, pATIHW->pll_xclk_cntl); - if (pATI->Chip >= ATI_CHIP_264LT) - ATIMach64PutPLLReg(PLL_EXT_VPLL_CNTL, - pATIHW->pll_ext_vpll_cntl); - ATIMach64PutPLLReg(PLL_VCLK_CNTL, - pATIHW->pll_vclk_cntl & ~PLL_VCLK_RESET); - - /* Load LCD registers */ - if (pATI->LCDPanelID >= 0) - { - if (pATI->Chip == ATI_CHIP_264LT) - { - /* Update non-shadow registers first */ - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl & ~SHADOW_RW_EN); - - /* Temporarily disable stretching */ - outr(HORZ_STRETCHING, pATIHW->horz_stretching & - ~(HORZ_STRETCH_MODE | HORZ_STRETCH_EN)); - outr(VERT_STRETCHING, pATIHW->vert_stretching & - ~(VERT_STRETCH_RATIO1 | VERT_STRETCH_RATIO2 | - VERT_STRETCH_USE0 | VERT_STRETCH_EN)); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - /* Update non-shadow registers first */ - ATIMach64PutLCDReg(LCD_CONFIG_PANEL, pATIHW->config_panel); - ATIMach64PutLCDReg(LCD_GEN_CNTL, pATIHW->lcd_gen_ctrl & - ~(CRTC_RW_SELECT | SHADOW_RW_EN)); - - /* Temporarily disable stretching */ - ATIMach64PutLCDReg(LCD_HORZ_STRETCHING, - pATIHW->horz_stretching & - ~(HORZ_STRETCH_MODE | HORZ_STRETCH_EN)); - ATIMach64PutLCDReg(LCD_VERT_STRETCHING, - pATIHW->vert_stretching & - ~(VERT_STRETCH_RATIO1 | VERT_STRETCH_RATIO2 | - VERT_STRETCH_USE0 | VERT_STRETCH_EN)); - } - } - } - } - - switch (pATIHW->crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - /* Start sequencer reset */ - PutReg(SEQX, 0x00U, 0x00U); - - /* Set pixel clock */ - if ((pATIHW->FeedbackDivider > 0) && - (pATI->ProgrammableClock > ATI_CLOCK_FIXED)) - ATIClockSet(pATI, pATIHW); - - /* Set up RAMDAC */ - if (pATI->DAC == ATI_DAC_IBMRGB514) - ATIRGB514Set(pATI, pATIHW); - - /* Load VGA Wonder */ - if (pATI->CPIO_VGAWonder) - ATIVGAWonderSet(pATI, pATIHW); - - /* Load VGA device */ - ATIVGASet(pATI, pATIHW); - - /* Load Mach64 registers */ - if (pATI->Chip >= ATI_CHIP_88800GXC) - { - /* Load MMIO registers */ - if (pATI->Block0Base) - ATIMach64Set(pATI, pATIHW); - - outr(CRTC_GEN_CNTL, pATIHW->crtc_gen_cntl); - outr(CUR_CLR0, pATIHW->cur_clr0); - outr(CUR_CLR1, pATIHW->cur_clr1); - outr(CUR_OFFSET, pATIHW->cur_offset); - outr(CUR_HORZ_VERT_POSN, pATIHW->cur_horz_vert_posn); - outr(CUR_HORZ_VERT_OFF, pATIHW->cur_horz_vert_off); - outr(BUS_CNTL, pATIHW->bus_cntl); - outr(MEM_VGA_WP_SEL, pATIHW->mem_vga_wp_sel); - outr(MEM_VGA_RP_SEL, pATIHW->mem_vga_rp_sel); - outr(DAC_CNTL, pATIHW->dac_cntl); - outr(GEN_TEST_CNTL, pATIHW->gen_test_cntl | GEN_GUI_EN); - outr(GEN_TEST_CNTL, pATIHW->gen_test_cntl); - outr(GEN_TEST_CNTL, pATIHW->gen_test_cntl | GEN_GUI_EN); - outr(CONFIG_CNTL, pATIHW->config_cntl); - if (pATI->Chip >= ATI_CHIP_264CT) - { - outr(CRTC_H_TOTAL_DISP, pATIHW->crtc_h_total_disp); - outr(CRTC_H_SYNC_STRT_WID, pATIHW->crtc_h_sync_strt_wid); - outr(CRTC_V_TOTAL_DISP, pATIHW->crtc_v_total_disp); - outr(CRTC_V_SYNC_STRT_WID, pATIHW->crtc_v_sync_strt_wid); - outr(CRTC_OFF_PITCH, pATIHW->crtc_off_pitch); - if (pATI->Chip >= ATI_CHIP_264VTB) - { - outr(MEM_CNTL, pATIHW->mem_cntl); - outr(MPP_CONFIG, pATIHW->mpp_config); - outr(MPP_STROBE_SEQ, pATIHW->mpp_strobe_seq); - outr(TVO_CNTL, pATIHW->tvo_cntl); - } - } - } - - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - /* Load Mach64 CRTC registers */ - ATIMach64Set(pATI, pATIHW); - -#ifndef AVOID_CPIO - - if (pATI->UseSmallApertures) - { - /* Oddly enough, these need to be set also, maybe others */ - PutReg(SEQX, 0x02U, pATIHW->seq[2]); - PutReg(SEQX, 0x04U, pATIHW->seq[4]); - PutReg(GRAX, 0x06U, pATIHW->gra[6]); - if (pATI->CPIO_VGAWonder) - ATIModifyExtReg(pATI, 0xB6U, -1, 0x00U, pATIHW->b6); - } - -#endif /* AVOID_CPIO */ - - break; - - default: - break; - } - - if (pATI->LCDPanelID >= 0) - { - /* Switch to shadow registers */ - if (pATI->Chip == ATI_CHIP_264LT) - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl | SHADOW_RW_EN); - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - ATIMach64PutLCDReg(LCD_GEN_CNTL, - (pATIHW->lcd_gen_ctrl & ~CRTC_RW_SELECT) | SHADOW_RW_EN); - - /* Restore shadow registers */ - switch (pATIHW->crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - for (Index = 0; - Index < NumberOf(pATIHW->shadow_vga); - Index++) - PutReg(CRTX(pATI->CPIO_VGABase), Index, - pATIHW->shadow_vga[Index]); - /* Fall through */ - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - outr(CRTC_H_TOTAL_DISP, pATIHW->shadow_h_total_disp); - outr(CRTC_H_SYNC_STRT_WID, pATIHW->shadow_h_sync_strt_wid); - outr(CRTC_V_TOTAL_DISP, pATIHW->shadow_v_total_disp); - outr(CRTC_V_SYNC_STRT_WID, pATIHW->shadow_v_sync_strt_wid); - break; - - default: - break; - } - - /* Restore CRTC selection & shadow state and enable stretching */ - if (pATI->Chip == ATI_CHIP_264LT) - { - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl); - outr(HORZ_STRETCHING, pATIHW->horz_stretching); - outr(VERT_STRETCHING, pATIHW->vert_stretching); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - ATIMach64PutLCDReg(LCD_GEN_CNTL, pATIHW->lcd_gen_ctrl); - ATIMach64PutLCDReg(LCD_HORZ_STRETCHING, pATIHW->horz_stretching); - ATIMach64PutLCDReg(LCD_VERT_STRETCHING, pATIHW->vert_stretching); - ATIMach64PutLCDReg(LCD_EXT_VERT_STRETCH, pATIHW->ext_vert_stretch); - outr(LCD_INDEX, pATIHW->lcd_index); - } - } - - /* - * Set DSP registers. Note that, for some reason, sequencer resets clear - * the DSP_CONFIG register on early integrated controllers. - */ - if (pATI->Chip >= ATI_CHIP_264VTB) - ATIDSPSet(pATI, pATIHW); - - /* Load RAMDAC */ - ATIDACSet(pATI, pATIHW); - - /* Reset hardware cursor caching */ - pATI->CursorXOffset = pATI->CursorYOffset = (CARD16)(-1); - -#ifndef AVOID_CPIO - - /* Restore video memory */ - ATISwap(pScreenInfo->scrnIndex, pATI, pATIHW, TRUE); - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - ATIVGASaveScreen(pATI, SCREEN_SAVER_OFF); /* Turn on screen */ - -#endif /* AVOID_CPIO */ - - if ((xf86GetVerbosity() > 3) && (pATIHW == &pATI->NewHW)) - { - xf86ErrorFVerb(4, "\n After setting mode \"%s\":\n\n", - pScreenInfo->currentMode->name); - ATIPrintMode(pScreenInfo->currentMode); - ATIPrintRegisters(pATI); - } -} diff --git a/src/atimode.h b/src/atimode.h deleted file mode 100644 index 63cb7650..00000000 --- a/src/atimode.h +++ /dev/null @@ -1,41 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimode.h,v 1.5 2003/01/01 19:16:32 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIMODE_H___ -#define ___ATIMODE_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -extern void ATIModePreInit FunctionPrototype((ScrnInfoPtr, ATIPtr, - ATIHWPtr)); -extern void ATIModeSave FunctionPrototype((ScrnInfoPtr, ATIPtr, - ATIHWPtr)); -extern Bool ATIModeCalculate FunctionPrototype((int, ATIPtr, ATIHWPtr, - DisplayModePtr)); -extern void ATIModeSet FunctionPrototype((ScrnInfoPtr, ATIPtr, - ATIHWPtr)); - -#endif /* ___ATIMODE_H___ */ diff --git a/src/atimodule.c b/src/atimodule.c deleted file mode 100644 index ed6b6215..00000000 --- a/src/atimodule.c +++ /dev/null @@ -1,127 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimodule.c,v 1.16 2003/05/28 14:08:03 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifdef XFree86LOADER - -#include "ati.h" -#include "atimodule.h" -#include "ativersion.h" - -/* Module loader interface */ - -const char *ATISymbols[] = -{ - "ATIPreInit", - "ATIScreenInit", - "ATISwitchMode", - "ATIAdjustFrame", - "ATIEnterVT", - "ATILeaveVT", - "ATIFreeScreen", - "ATIValidMode", - NULL -}; - -const char *R128Symbols[] = -{ - "R128PreInit", - "R128ScreenInit", - "R128SwitchMode", - "R128AdjustFrame", - "R128EnterVT", - "R128LeaveVT", - "R128FreeScreen", - "R128ValidMode", - "R128Options", - NULL -}; - -const char *RADEONSymbols[] = -{ - "RADEONPreInit", - "RADEONScreenInit", - "RADEONSwitchMode", - "RADEONAdjustFrame", - "RADEONEnterVT", - "RADEONLeaveVT", - "RADEONFreeScreen", - "RADEONValidMode", - "RADEONOptions", - "RADEONHandleMessage", - NULL -}; - -static XF86ModuleVersionInfo ATIVersionRec = -{ - ATI_DRIVER_NAME, - MODULEVENDORSTRING, - MODINFOSTRING1, - MODINFOSTRING2, - XF86_VERSION_CURRENT, - ATI_VERSION_MAJOR, ATI_VERSION_MINOR, ATI_VERSION_PATCH, - ABI_CLASS_VIDEODRV, - ABI_VIDEODRV_VERSION, - MOD_CLASS_VIDEODRV, - {0, 0, 0, 0} -}; - -/* - * ATISetup -- - * - * This function is called every time the module is loaded. - */ -static pointer -ATISetup -( - pointer Module, - pointer Options, - int *ErrorMajor, - int *ErrorMinor -) -{ - static Bool Inited = FALSE; - - if (!Inited) - { - Inited = TRUE; - xf86AddDriver(&ATI, Module, 0); - - xf86LoaderRefSymLists( - ATISymbols, - R128Symbols, - RADEONSymbols, - NULL); - } - - return (pointer)1; -} - -/* The following record must be called atiModuleData */ -XF86ModuleData atiModuleData = -{ - &ATIVersionRec, - ATISetup, - NULL -}; - -#endif /* XFree86LOADER */ diff --git a/src/atimodule.h b/src/atimodule.h deleted file mode 100644 index 833e421b..00000000 --- a/src/atimodule.h +++ /dev/null @@ -1,31 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimodule.h,v 1.9 2003/01/01 19:16:32 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#if defined(XFree86LOADER) && !defined(___ATIMODULE_H___) -#define ___ATIMODULE_H___ 1 - -extern const char *ATISymbols[]; -extern const char *R128Symbols[]; -extern const char *RADEONSymbols[]; - -#endif /* ___ATIMODULE_H___ */ diff --git a/src/atimono.h b/src/atimono.h deleted file mode 100644 index 6325cbe4..00000000 --- a/src/atimono.h +++ /dev/null @@ -1,43 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atimono.h,v 1.7 2003/01/01 19:16:33 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIMONO_H___ -#define ___ATIMONO_H___ 1 - -#ifndef BIT_PLANE -# define BIT_PLANE 3 -#endif - -#ifndef MONO_BLACK -# define MONO_BLACK 0x00U -#endif - -#ifndef MONO_WHITE -# define MONO_WHITE 0x3FU -#endif - -#ifndef MONO_OVERSCAN -# define MONO_OVERSCAN 0x01U -#endif - -#endif /* ___ATIMONO_H___ */ diff --git a/src/atioption.c b/src/atioption.c deleted file mode 100644 index 1bd90eca..00000000 --- a/src/atioption.c +++ /dev/null @@ -1,209 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atioption.c,v 1.22 2003/04/23 21:51:29 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#include "atioption.h" -#include "atiutil.h" - -#include "radeon_probe.h" -#include "r128_probe.h" - -/* - * Recognised XF86Config options. - */ -const OptionInfoRec ATIPublicOptions[] = -{ - { - ATI_OPTION_ACCEL, - "accel", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { - ATI_OPTION_CRT_DISPLAY, - "crt_display", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { - ATI_OPTION_CSYNC, - "composite_sync", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { - ATI_OPTION_HWCURSOR, - "hw_cursor", - OPTV_BOOLEAN, - {0, }, - FALSE, - }, - -#ifndef AVOID_CPIO - - { - ATI_OPTION_LINEAR, - "linear", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - -#endif /* AVOID_CPIO */ - -#ifdef XF86DRI - - { - ATI_OPTION_IS_PCI, - "force_pci_mode", - OPTV_BOOLEAN, - {0, }, - FALSE, - }, - { - ATI_OPTION_DMA_MODE, - "dma_mode", - OPTV_STRING, - {0, }, - FALSE, - }, - { - ATI_OPTION_AGP_MODE, - "agp_mode", - OPTV_INTEGER, - {0, }, - FALSE, - }, - { - ATI_OPTION_AGP_SIZE, - "agp_size", - OPTV_INTEGER, - {0, }, - FALSE, - }, - { - ATI_OPTION_LOCAL_TEXTURES, - "local_textures", - OPTV_BOOLEAN, - {0, }, - FALSE, - }, - { - ATI_OPTION_BUFFER_SIZE, - "buffer_size", - OPTV_INTEGER, - {0, }, - FALSE, - }, - -#endif /* XF86DRI */ - - { - ATI_OPTION_MMIO_CACHE, - "mmio_cache", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - - - { - ATI_OPTION_TEST_MMIO_CACHE, - "test_mmio_cache", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { - ATI_OPTION_PANEL_DISPLAY, - "panel_display", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { - ATI_OPTION_PROBE_CLOCKS, - "probe_clocks", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { - ATI_OPTION_REFERENCE_CLOCK, - "reference_clock", - OPTV_FREQ, - {0, }, - FALSE - }, - { - ATI_OPTION_SHADOW_FB, - "shadow_fb", - OPTV_BOOLEAN, - {0, }, - FALSE - }, - { - ATI_OPTION_SWCURSOR, - "sw_cursor", - OPTV_BOOLEAN, - {0, }, - FALSE, - }, - { - -1, - NULL, - OPTV_NONE, - {0, }, - FALSE - } -}; - -const unsigned long ATIPublicOptionSize = SizeOf(ATIPublicOptions); - -/* - * ATIAvailableOptions -- - * - * Return recognised options that are intended for public consumption. - */ -const OptionInfoRec * -ATIAvailableOptions -( - int ChipId, - int BusId -) -{ - const OptionInfoRec *pOptions; - - if ((pOptions = R128AvailableOptions(ChipId, BusId))) - return pOptions; - - if ((pOptions = RADEONAvailableOptions(ChipId, BusId))) - return pOptions; - - return ATIPublicOptions; -} diff --git a/src/atioption.h b/src/atioption.h deleted file mode 100644 index 6a907dbd..00000000 --- a/src/atioption.h +++ /dev/null @@ -1,75 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atioption.h,v 1.12 2003/04/23 21:51:29 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifndef ___ATIOPTION_H___ -#define ___ATIOPTION_H___ 1 - -#include "atiproto.h" - -#include "xf86str.h" - -/* - * Documented XF86Config options. - */ -typedef enum -{ - ATI_OPTION_ACCEL, - ATI_OPTION_CRT_DISPLAY, - ATI_OPTION_CSYNC, - ATI_OPTION_HWCURSOR, - -#ifndef AVOID_CPIO - - ATI_OPTION_LINEAR, - -#endif /* AVOID_CPIO */ - -#ifdef XF86DRI - - ATI_OPTION_IS_PCI, - ATI_OPTION_DMA_MODE, - ATI_OPTION_AGP_MODE, - ATI_OPTION_AGP_SIZE, - ATI_OPTION_LOCAL_TEXTURES, - ATI_OPTION_BUFFER_SIZE, - -#endif /* XF86DRI */ - - ATI_OPTION_MMIO_CACHE, - ATI_OPTION_TEST_MMIO_CACHE, - ATI_OPTION_PANEL_DISPLAY, - ATI_OPTION_PROBE_CLOCKS, - ATI_OPTION_REFERENCE_CLOCK, - ATI_OPTION_SHADOW_FB, - ATI_OPTION_SWCURSOR -} ATIPublicOptionType; - -extern const OptionInfoRec ATIPublicOptions[]; -extern const unsigned long ATIPublicOptionSize; - -extern const OptionInfoRec * ATIAvailableOptions FunctionPrototype((int, int)); - -#endif /* ___ATIOPTION_H___ */ diff --git a/src/atipreinit.c b/src/atipreinit.c deleted file mode 100644 index 71aa0498..00000000 --- a/src/atipreinit.c +++ /dev/null @@ -1,3443 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atipreinit.c,v 1.69 2003/08/23 17:10:42 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atiadjust.h" -#include "atiaudio.h" -#include "atibus.h" -#include "atichip.h" -#include "aticonfig.h" -#include "aticursor.h" -#include "atidac.h" -#include "atidsp.h" -#include "atii2c.h" -#include "atiident.h" -#include "atiload.h" -#include "atilock.h" -#include "atimach64.h" -#include "atimach64accel.h" -#include "atimach64io.h" -#include "atimode.h" -#include "atipreinit.h" -#include "atiprint.h" -#include "atividmem.h" -#include "atiwonderio.h" -#include "atixv.h" - -#include "vbe.h" -#include "xf86RAC.h" - -#ifndef AVOID_CPIO - -typedef CARD16 Colour; /* The correct spelling should be OK :-) */ - -/* - * Bit patterns which are extremely unlikely to show up when reading from - * nonexistant memory (which normally shows up as either all bits set or all - * bits clear). - */ -static const Colour Test_Pixel[] = {0x5AA5U, 0x55AAU, 0xA55AU, 0xCA53U}; - -static const struct -{ - int videoRamSize; - int Miscellaneous_Options_Setting; - struct - { - short int x, y; - } - Coordinates[NumberOf(Test_Pixel) + 1]; -} -Test_Case[] = -{ - /* - * Given the engine settings used, only a 4M card will have enough memory - * to back up the 1025th line of the display. Since the pixel coordinates - * are zero-based, line 1024 will be the first one which is only backed on - * 4M cards. - * - * <Mark_Weaver@brown.edu>: - * In case memory is being wrapped, (0,0) and (0,1024) to make sure they - * can each hold a unique value. - */ - {4096, MEM_SIZE_4M, {{0,0}, {0,1024}, {-1,-1}}}, - - /* - * This card has 2M or less. On a 1M card, the first 2M of the card's - * memory will have even doublewords backed by physical memory and odd - * doublewords unbacked. - * - * Pixels 0 and 1 of a row will be in the zeroth doubleword, while pixels 2 - * and 3 will be in the first. Check both pixels 2 and 3 in case this is a - * pseudo-1M card (one chip pulled to turn a 2M card into a 1M card). - * - * <Mark_Weaver@brown.edu>: - * I don't have a 1M card, so I'm taking a stab in the dark. Maybe memory - * wraps every 512 lines, or maybe odd doublewords are aliases of their - * even doubleword counterparts. I try everything here. - */ - {2048, MEM_SIZE_2M, {{0,0}, {0,512}, {2,0}, {3,0}, {-1,-1}}}, - - /* - * This is a either a 1M card or a 512k card. Test pixel 1, since it is an - * odd word in an even doubleword. - * - * <Mark_Weaver@brown.edu>: - * This is the same idea as the test above. - */ - {1024, MEM_SIZE_1M, {{0,0}, {0,256}, {1,0}, {-1,-1}}}, - - /* - * Assume it is a 512k card by default, since that is the minimum - * configuration. - */ - {512, MEM_SIZE_512K, {{-1,-1}}} -}; - -/* - * ATIMach32ReadPixel -- - * - * Return the colour of the specified screen location. Called from - * ATIMach32videoRam function below. - */ -static Colour -ATIMach32ReadPixel -( - const short int X, - const short int Y -) -{ - Colour Pixel_Colour; - - /* Wait for idle engine */ - ProbeWaitIdleEmpty(); - - /* Set up engine for pixel read */ - ATIWaitQueue(7); - outw(RD_MASK, (CARD16)(~0)); - outw(DP_CONFIG, FG_COLOR_SRC_BLIT | DATA_WIDTH | DRAW | DATA_ORDER); - outw(CUR_X, X); - outw(CUR_Y, Y); - outw(DEST_X_START, X); - outw(DEST_X_END, X + 1); - outw(DEST_Y_END, Y + 1); - - /* Wait for data to become ready */ - ATIWaitQueue(16); - WaitDataReady(); - - /* Read pixel colour */ - Pixel_Colour = inw(PIX_TRANS); - ProbeWaitIdleEmpty(); - return Pixel_Colour; -} - -/* - * ATIMach32WritePixel -- - * - * Set the colour of the specified screen location. Called from - * ATIMach32videoRam function below. - */ -static void -ATIMach32WritePixel -( - const short int X, - const short int Y, - const Colour Pixel_Colour -) -{ - /* Set up engine for pixel write */ - ATIWaitQueue(9); - outw(WRT_MASK, (CARD16)(~0)); - outw(DP_CONFIG, FG_COLOR_SRC_FG | DRAW | READ_WRITE); - outw(ALU_FG_FN, MIX_FN_PAINT); - outw(FRGD_COLOR, Pixel_Colour); - outw(CUR_X, X); - outw(CUR_Y, Y); - outw(DEST_X_START, X); - outw(DEST_X_END, X + 1); - outw(DEST_Y_END, Y + 1); -} - -/* - * ATIMach32videoRam -- - * - * Determine the amount of video memory installed on an 68800-6 based adapter. - * This is done because these chips exhibit a bug that causes their - * MISC_OPTIONS register to report 1M rather than the true amount of memory. - * - * This function is adapted from a similar function in mach32mem.c written by - * Robert Wolff, David Dawes and Mark Weaver. - */ -static int -ATIMach32videoRam -( - void -) -{ - CARD16 clock_sel, mem_bndry, misc_options, ext_ge_config; - Colour saved_Pixel[NumberOf(Test_Pixel)]; - unsigned int Case_Number, Pixel_Number; - Bool AllPixelsOK; - - /* Save register values to be modified */ - clock_sel = inw(CLOCK_SEL); - mem_bndry = inw(MEM_BNDRY); - misc_options = inw(MISC_OPTIONS) & ~MEM_SIZE_ALIAS; - ext_ge_config = inw(R_EXT_GE_CONFIG); - - /* Wait for enough FIFO entries */ - ATIWaitQueue(7); - - /* Enable accelerator */ - outw(CLOCK_SEL, clock_sel | DISABPASSTHRU); - - /* Make accelerator and VGA share video memory */ - outw(MEM_BNDRY, mem_bndry & ~(MEM_PAGE_BNDRY | MEM_BNDRY_ENA)); - - /* Prevent video memory wrap */ - outw(MISC_OPTIONS, misc_options | MEM_SIZE_4M); - - /* - * Set up the drawing engine for a pitch of 1024 at 16 bits per pixel. No - * need to mess with the CRT because the results of this test are not - * intended to be seen. - */ - outw(EXT_GE_CONFIG, PIXEL_WIDTH_16 | ORDER_16BPP_565 | MONITOR_8514 | - ALIAS_ENA); - outw(GE_PITCH, 1024 >> 3); - outw(GE_OFFSET_HI, 0); - outw(GE_OFFSET_LO, 0); - - for (Case_Number = 0; - Case_Number < (NumberOf(Test_Case) - 1); - Case_Number++) - { - /* Reduce redundancy as per Mark_Weaver@brown.edu */ -# define TestPixel Test_Case[Case_Number].Coordinates[Pixel_Number] -# define ForEachTestPixel \ - for (Pixel_Number = 0; TestPixel.x >= 0; Pixel_Number++) - - /* Save pixel colours that will be clobbered */ - ForEachTestPixel - saved_Pixel[Pixel_Number] = - ATIMach32ReadPixel(TestPixel.x, TestPixel.y); - - /* Write test patterns */ - ForEachTestPixel - ATIMach32WritePixel(TestPixel.x, TestPixel.y, - Test_Pixel[Pixel_Number]); - - /* Test for lost pixels */ - AllPixelsOK = TRUE; - ForEachTestPixel - { - if (ATIMach32ReadPixel(TestPixel.x, TestPixel.y) != - Test_Pixel[Pixel_Number]) - { - AllPixelsOK = FALSE; - break; - } - } - - /* Restore clobbered pixels */ - ForEachTestPixel - ATIMach32WritePixel(TestPixel.x, TestPixel.y, - saved_Pixel[Pixel_Number]); - - /* End test on success */ - if (AllPixelsOK) - break; - - /* Completeness */ -# undef ForEachTestPixel -# undef TestPixel - } - - /* Restore what was changed and correct MISC_OPTIONS register */ - ATIWaitQueue(4); - outw(EXT_GE_CONFIG, ext_ge_config); - misc_options |= Test_Case[Case_Number].Miscellaneous_Options_Setting; - outw(MISC_OPTIONS, misc_options); - outw(MEM_BNDRY, mem_bndry); - outw(CLOCK_SEL, clock_sel); - - /* Wait for activity to die down */ - ProbeWaitIdleEmpty(); - - /* Tell ATIPreInit the REAL story */ - return Test_Case[Case_Number].videoRamSize; -} - -#endif /* AVOID_CPIO */ - -/* - * ATIReportMemory -- - * - * This function reports on the amount and type of video memory found. - */ -static void -ATIReportMemory -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - const char *MemoryTypeName -) -{ - char Buffer[128], *Message; - - Message = Buffer + - snprintf(Buffer, SizeOf(Buffer), "%d kB of %s detected", - pATI->VideoRAM, MemoryTypeName); - -#ifndef AVOID_CPIO - - if (pATI->depth == 1) - { - /* 1bpp only uses one plane of four */ - pScreenInfo->videoRam /= 4; - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - " (using %d kB)", pScreenInfo->videoRam); - } - else - -#endif /* AVOID_CPIO */ - - if (pATI->VideoRAM > pScreenInfo->videoRam) - { - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - " (using %d kB)", pScreenInfo->videoRam); - } - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, "%s.\n", Buffer); -} - -static const int videoRamSizes[] = - {0, 256, 512, 1024, 2*1024, 4*1024, 6*1024, 8*1024, 12*1024, 16*1024, 0}; -static const rgb defaultWeight = {0, 0, 0}; -static const Gamma defaultGamma = {0.0, 0.0, 0.0}; - -/* - * ATIMach64Map -- - * - * This function attempts to mmap() a Mach64's MMIO aperture. - */ -static void -ATIMach64Map -( - int iScreen, - ATIPtr pATI -) -{ - (void)ATIMapApertures(iScreen, pATI); - if (!pATI->pBlock[0] || - (pATI->config_chip_id != inr(CONFIG_CHIP_ID))) - ATIUnmapApertures(iScreen, pATI); -} - -/* - * ATIPrintNoiseIfRequested -- - * - * This function formats debugging information on the server's stderr when - * requested by the user through the server's verbosity setting. - */ -static void -ATIPrintNoiseIfRequested -( - ATIPtr pATI, - CARD8 *BIOS, - unsigned int BIOSSize -) -{ - if (xf86GetVerbosity() <= 3) - return; - - if (BIOSSize > 0) - ATIPrintBIOS(BIOS, BIOSSize); - xf86ErrorFVerb(4, "\n On server entry:\n"); - ATIPrintRegisters(pATI); -} - -/* - * ATIPreInit -- - * - * This function is only called once per screen at the start of the first - * server generation. - */ -Bool -ATIPreInit -( - ScrnInfoPtr pScreenInfo, - int flags -) -{ -# define BIOS_SIZE 0x00010000U /* 64kB */ - CARD8 BIOS[BIOS_SIZE]; -# define BIOSByte(_n) ((CARD8)(BIOS[_n])) -# define BIOSWord(_n) ((CARD16)(BIOS[_n] | \ - (BIOS[(_n) + 1] << 8))) -# define BIOSLong(_n) ((CARD32)(BIOS[_n] | \ - (BIOS[(_n) + 1] << 8) | \ - (BIOS[(_n) + 2] << 16) | \ - (BIOS[(_n) + 3] << 24))) - unsigned int BIOSSize = 0; - unsigned int ROMTable = 0, ClockTable = 0, FrequencyTable = 0; - unsigned int LCDTable = 0, LCDPanelInfo = 0, VideoTable = 0; - unsigned int HardwareTable = 0; - - char Buffer[128], *Message; - ATIPtr pATI; - GDevPtr pGDev; - EntityInfoPtr pEntity; - resPtr pResources; - pciVideoPtr pVideo; - DisplayModePtr pMode; - unsigned long Block0Base; - CARD32 IOValue; - int i, j, AcceleratorVideoRAM = 0, ServerVideoRAM; - int Numerator, Denominator; - int MinX, MinY; - ClockRange ATIClockRange = {NULL, 0, 80000, 0, TRUE, TRUE, 1, 1, 0}; - int DefaultmaxClock = 0; - int minPitch, maxPitch = 0xFFU, maxHeight = 0; - int ApertureSize = 0x00010000U; - int ModeType = M_T_BUILTIN; - LookupModeFlags Strategy = LOOKUP_CLOSEST_CLOCK; - int DefaultDepth; - -# define pATIHW (&pATI->OldHW) - -#ifndef AVOID_CPIO - - xf86Int10InfoPtr pInt10Info = NULL; - vbeInfoPtr pVBE; - pointer pInt10Module, pDDCModule = NULL, pVBEModule = NULL; - int VGAVideoRAM = 0; - resRange Resources[2] = {{0, 0, 0}, _END}; - -#endif /* AVOID_CPIO */ - - if (pScreenInfo->numEntities != 1) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Logic error: Number of attached entities not 1.\n"); - return FALSE; - } - - pATI = ATIPTR(pScreenInfo); - - if (pATI->iEntity != pScreenInfo->entityList[0]) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Logic error: Entity mismatch.\n"); - return FALSE; - } - - /* Register resources */ - pEntity = xf86GetEntityInfo(pATI->iEntity); - pGDev = pEntity->device; - pResources = pEntity->resources; - xfree(pEntity); - if (!pResources) - pResources = xf86RegisterResources(pATI->iEntity, NULL, - pATI->SharedAccelerator ? ResShared : ResExclusive); - if (pResources) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Unable to register the following bus resources:\n"); - xf86PrintResList(0, pResources); - xf86FreeResList(pResources); - return FALSE; - } - - ConfiguredMonitor = NULL; - (void)memset(BIOS, 0, SizeOf(BIOS)); - - if (!(flags & PROBE_DETECT)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, - pATI->Chipset ? X_CONFIG : X_DEFAULT, - "Chipset: \"%s\".\n", ATIChipsetNames[pATI->Chipset]); - - /* Promote chipset specification */ - switch (pATI->Chipset) - { - -#ifndef AVOID_CPIO - - case ATI_CHIPSET_IBMVGA: - if (pATI->Adapter == ATI_ADAPTER_VGA) - break; /* XXX */ - /* Fall through */ - - case ATI_CHIPSET_VGAWONDER: - pATI->Chipset = ATI_CHIPSET_ATIVGA; - break; - - case ATI_CHIPSET_IBM8514: - if (pATI->Adapter == ATI_ADAPTER_8514A) - break; /* XXX */ - /* Fall through */ - - case ATI_CHIPSET_MACH8: - case ATI_CHIPSET_MACH32: - -#endif /* AVOID_CPIO */ - - case ATI_CHIPSET_MACH64: - case ATI_CHIPSET_RAGE128: - case ATI_CHIPSET_RADEON: - pATI->Chipset = ATI_CHIPSET_ATI; - break; - - default: - break; - } - - /* Set monitor */ - pScreenInfo->monitor = pScreenInfo->confScreen->monitor; - - /* Set depth, bpp, etc. */ - if ((pATI->Chipset != ATI_CHIPSET_ATI) || - (pATI->Chip < ATI_CHIP_264CT)) - { - i = NoDepth24Support; /* No support for >8bpp either */ - DefaultDepth = 8; - } - else - { - i = Support24bppFb | Support32bppFb; - DefaultDepth = 0; - } - - if (!xf86SetDepthBpp(pScreenInfo, DefaultDepth, 0, 0, i)) - return FALSE; - - for (j = 0; ; j++) - { - static const CARD8 AllowedDepthBpp[][2] = - { - -#ifndef AVOID_CPIO - - { 1, 1}, - { 4, 4}, - { 4, 8}, - -#endif /* AVOID_CPIO */ - - { 8, 8}, - {15, 16}, - {16, 16}, - {24, 24}, - {24, 32} - }; - - if (j < NumberOf(AllowedDepthBpp)) - { - if (pScreenInfo->depth > AllowedDepthBpp[j][0]) - continue; - - if (pScreenInfo->depth == AllowedDepthBpp[j][0]) - { - if (pScreenInfo->bitsPerPixel > AllowedDepthBpp[j][1]) - continue; - - if (pScreenInfo->bitsPerPixel == AllowedDepthBpp[j][1]) - break; - } - } - - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Driver does not support depth %d at fbbpp %d.\n", - pScreenInfo->depth, pScreenInfo->bitsPerPixel); - return FALSE; - } - - xf86PrintDepthBpp(pScreenInfo); - - if ((i == NoDepth24Support) && (pScreenInfo->depth > 8)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Depth %d is not supported through this adapter.\n", - pScreenInfo->depth); - return FALSE; - } - - /* Pick up XF86Config options */ - ATIProcessOptions(pScreenInfo, pATI); - } - -#ifdef AVOID_CPIO - - else /* if (flags & PROBE_DETECT) */ - { - return TRUE; - } - -#else /* AVOID_CPIO */ - - /* - * If there is an ix86-style BIOS, ensure its initialisation entry point - * has been executed, and retrieve DDC and VBE information from it. - */ - if (!(pInt10Module = ATILoadModule(pScreenInfo, "int10", ATIint10Symbols))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to load int10 module.\n"); - } - else if (!(pInt10Info = xf86InitInt10(pATI->iEntity))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to initialise int10 interface.\n"); - } - else - { - if (!(pDDCModule = ATILoadModule(pScreenInfo, "ddc", ATIddcSymbols))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to load ddc module.\n"); - } - else - if (!(pVBEModule = ATILoadModule(pScreenInfo, "vbe", ATIvbeSymbols))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to load vbe module.\n"); - } - else - { - if ((pVBE = VBEInit(pInt10Info, pATI->iEntity))) - { - ConfiguredMonitor = vbeDoEDID(pVBE, pDDCModule); - vbeFree(pVBE); - } - xf86UnloadSubModule(pVBEModule); - } - - if (!(flags & PROBE_DETECT)) - { - /* Validate, then make a private copy of, the initialised BIOS */ - CARD8 *pBIOS = xf86int10Addr(pInt10Info, pInt10Info->BIOSseg << 4); - - if ((pBIOS[0] != 0x55U) || (pBIOS[1] != 0xAAU) || !pBIOS[2]) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to correctly retrieve adapter BIOS.\n"); - } - else - { - BIOSSize = pBIOS[2] << 9; - if (BIOSSize > BIOS_SIZE) - BIOSSize = BIOS_SIZE; - (void)memcpy(BIOS, pBIOS, BIOSSize); - } - } - } - - /* De-activate int10 */ - xf86FreeInt10(pInt10Info); - xf86UnloadSubModule(pInt10Module); - - if (flags & PROBE_DETECT) - { - xf86UnloadSubModule(pDDCModule); - return TRUE; - } - - if (ConfiguredMonitor) - { - xf86PrintEDID(ConfiguredMonitor); - xf86SetDDCproperties(pScreenInfo, ConfiguredMonitor); - } - - /* DDC module is no longer needed at this point */ - xf86UnloadSubModule(pDDCModule); - -#endif /* AVOID_CPIO */ - - pATI->Block0Base = 0; /* Might no longer be valid */ - if ((pVideo = pATI->PCIInfo)) - { - if (pATI->CPIODecoding == BLOCK_IO) - pATI->CPIOBase = pVideo->ioBase[1]; - - /* Set MMIO address from PCI configuration space, if available */ - if ((pATI->Block0Base = pVideo->memBase[2])) - { - if (pATI->Block0Base >= (CARD32)(-1 << pVideo->size[2])) - pATI->Block0Base = 0; - else - pATI->Block0Base += 0x0400U; - } - } - -#ifdef AVOID_CPIO - - pScreenInfo->racMemFlags = - RAC_FB | RAC_COLORMAP | RAC_VIEWPORT | RAC_CURSOR; - -#else /* AVOID_CPIO */ - - pScreenInfo->racIoFlags = - RAC_FB | RAC_COLORMAP | RAC_VIEWPORT | RAC_CURSOR; - pScreenInfo->racMemFlags = RAC_FB | RAC_CURSOR; - -#endif /* AVOID_CPIO */ - - /* Deal with ChipID & ChipRev overrides */ - if (pGDev->chipID >= 0) - { - ATIChipType Chip; - - Chip = ATIChipID(pGDev->chipID, - (pGDev->chipRev < 0) ? pATI->ChipRev : pGDev->chipRev); - if (Chip != pATI->Chip) - { - pATI->Chip = Chip; - pATI->ChipType = pGDev->chipID; - if (pGDev->chipRev < 0) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_CONFIG, - "Driver messages reflect ChipID 0x%04X override.\n", - pATI->ChipType); - } - else - { - pATI->ChipRev = pGDev->chipRev; - pATI->ChipVersion = GetBits(pATI->ChipRev, - GetBits(CFG_CHIP_VERSION, CFG_CHIP_REV)); - pATI->ChipFoundry = GetBits(pATI->ChipRev, - GetBits(CFG_CHIP_FOUNDRY, CFG_CHIP_REV)); - pATI->ChipRevision = GetBits(pATI->ChipRev, - GetBits(CFG_CHIP_REVISION, CFG_CHIP_REV)); - xf86DrvMsg(pScreenInfo->scrnIndex, X_CONFIG, - "Driver messages reflect ChipID 0x%04X and ChipRev 0x%02X" - " overrides.\n", pATI->ChipType, pATI->ChipRev); - } - } - } - - /* Finish private area initialisation */ - pATI->DAC = ATI_DAC_GENERIC; - -#ifndef AVOID_CPIO - - pATI->NewHW.SetBank = ATIx8800SetBank; - pATI->BankInfo.SetSourceBank = ATIx8800SetRead; - pATI->BankInfo.SetDestinationBank = ATIx8800SetWrite; - pATI->BankInfo.SetSourceAndDestinationBanks = ATIx8800SetReadWrite; - pATI->BankInfo.BankSize = 0x00010000U; /* 64kB */ - -#endif /* AVOID_CPIO */ - - pATI->LCDPanelID = -1; - pATI->nFIFOEntries = 16; /* For now */ - pATI->Audio = ATI_AUDIO_NONE; - - /* Finish probing the adapter */ - switch (pATI->Adapter) - { - -#ifndef AVOID_CPIO - - case ATI_ADAPTER_NONE: - case ATI_ADAPTER_EGA: - case ATI_ADAPTER_EGA_PLUS: - case ATI_ADAPTER_VGA: - case ATI_ADAPTER_BASIC: - pATI->NewHW.SetBank = (ATIBankProcPtr)NoopDDA; - pATI->BankInfo.SetSourceBank = - pATI->BankInfo.SetDestinationBank = - pATI->BankInfo.SetSourceAndDestinationBanks = - (miBankProcPtr)NoopDDA; - break; - - case ATI_ADAPTER_V3: - pATI->NewHW.SetBank = ATIV3SetBank; - pATI->BankInfo.SetSourceBank = ATIV3SetRead; - pATI->BankInfo.SetDestinationBank = ATIV3SetWrite; - pATI->BankInfo.SetSourceAndDestinationBanks = ATIV3SetReadWrite; - break; - - case ATI_ADAPTER_V4: - case ATI_ADAPTER_V5: - pATI->NewHW.SetBank = ATIV4V5SetBank; - pATI->BankInfo.SetSourceBank = ATIV4V5SetRead; - pATI->BankInfo.SetDestinationBank = ATIV4V5SetWrite; - pATI->BankInfo.SetSourceAndDestinationBanks = ATIV4V5SetReadWrite; - break; - - case ATI_ADAPTER_XL: - pATI->DAC = ATI_DAC_SC11483; - break; - - case ATI_ADAPTER_8514A: - pATI->VideoRAM = - videoRamSizes[GetBits(inw(SUBSYS_STAT), _8PLANE) + 2]; - break; - - case ATI_ADAPTER_MACH8: - pATI->VideoRAM = - videoRamSizes[GetBits(inw(CONFIG_STATUS_1), MEM_INSTALLED) + 2]; - break; - - case ATI_ADAPTER_MACH32: - IOValue = inw(CONFIG_STATUS_1); - pATI->DAC = ATI_DAC(GetBits(IOValue, DACTYPE), 0); - pATI->MemoryType = GetBits(IOValue, MEM_TYPE); - - IOValue = inw(MISC_OPTIONS); - pATI->VideoRAM = - videoRamSizes[GetBits(IOValue, MEM_SIZE_ALIAS) + 2]; - - /* - * The 68800-6 doesn't necessarily report the correct video memory - * size. - */ - if ((pATI->Chip == ATI_CHIP_68800_6) && (pATI->VideoRAM == 1024)) - pATI->VideoRAM = ATIMach32videoRam(); - - break; - -#endif /* AVOID_CPIO */ - - case ATI_ADAPTER_MACH64: - do - { - /* - * Find and mmap() MMIO area. Allow only auxiliary aperture if - * it exists. - */ - if (!(Block0Base = pATI->Block0Base)) - { - if (pVideo) - { - /* Check tail end of linear (8MB or 4MB) aperture */ - if ((pATI->Block0Base = pVideo->memBase[0])) - { - pATI->Block0Base += 0x007FFC00U; - ATIMach64Map(pScreenInfo->scrnIndex, pATI); - if (pATI->pBlock[0]) - break; - - pATI->Block0Base -= 0x00400000U; - ATIMach64Map(pScreenInfo->scrnIndex, pATI); - if (pATI->pBlock[0]) - break; - } - } - - /* Check VGA MMIO aperture */ - pATI->Block0Base = 0x000BFC00U; - } - - ATIMach64Map(pScreenInfo->scrnIndex, pATI); - } while (0); - pATI->Block0Base = Block0Base; - -#ifdef AVOID_CPIO - - if (!pATI->pBlock[0]) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Unable to mmap() adapter registers.\n"); - return FALSE; - } - -#endif /* AVOID_CPIO */ - - pATIHW->crtc_gen_cntl = inr(CRTC_GEN_CNTL); - if (!(pATIHW->crtc_gen_cntl & CRTC_EN) && - (pATI->Chip >= ATI_CHIP_264CT)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Adapter has not been initialised.\n"); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - -#ifdef AVOID_CPIO - - if (!(pATIHW->crtc_gen_cntl & CRTC_EXT_DISP_EN)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Adapters found to be in VGA mode on server entry are not" - " supported by the MMIO-only version of this driver.\n"); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - -#endif /* AVOID_CPIO */ - - pATIHW->mem_cntl = inr(MEM_CNTL); - if (pATI->Chip < ATI_CHIP_264VTB) - { - pATI->VideoRAM = - videoRamSizes[GetBits(pATIHW->mem_cntl, CTL_MEM_SIZE) + 2]; - } - else - { - pATI->nFIFOEntries = /* Don't care */ - (unsigned int)(-1) >> 1; - - IOValue = GetBits(pATIHW->mem_cntl, CTL_MEM_SIZEB); - if (IOValue < 8) - pATI->VideoRAM = (IOValue + 1) * 512; - else if (IOValue < 12) - pATI->VideoRAM = (IOValue - 3) * 1024; - else - pATI->VideoRAM = (IOValue - 7) * 2048; - } - - pATI->DAC = GetBits(inr(DAC_CNTL), DAC_TYPE); - - IOValue = inr(CONFIG_STATUS64_0); - if (pATI->Chip >= ATI_CHIP_264CT) - { - pATI->MemoryType = GetBits(IOValue, CFG_MEM_TYPE_T); - - /* Get LCD panel id */ - if (pATI->Chip == ATI_CHIP_264LT) - { - pATI->LCDPanelID = GetBits(IOValue, CFG_PANEL_ID); - - pATIHW->horz_stretching = inr(HORZ_STRETCHING); - pATIHW->vert_stretching = inr(VERT_STRETCHING); - pATIHW->lcd_gen_ctrl = inr(LCD_GEN_CTRL); - } - else if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) - { - pATI->LCDPanelID = GetBits(IOValue, CFG_PANEL_ID); - - pATIHW->lcd_index = inr(LCD_INDEX); - pATIHW->horz_stretching = - ATIMach64GetLCDReg(LCD_HORZ_STRETCHING); - pATI->LCDHorizontal = - GetBits(pATIHW->horz_stretching, HORZ_PANEL_SIZE); - if (pATI->LCDHorizontal) - { - if (pATI->LCDHorizontal == MaxBits(HORZ_PANEL_SIZE)) - pATI->LCDHorizontal = 0; - else - pATI->LCDHorizontal = - (pATI->LCDHorizontal + 1) << 3; - } - pATIHW->ext_vert_stretch = - ATIMach64GetLCDReg(LCD_EXT_VERT_STRETCH); - pATI->LCDVertical = - GetBits(pATIHW->ext_vert_stretch, VERT_PANEL_SIZE); - if (pATI->LCDVertical) - { - if (pATI->LCDVertical == MaxBits(VERT_PANEL_SIZE)) - pATI->LCDVertical = 0; - else - pATI->LCDVertical++; - } - pATIHW->vert_stretching = - ATIMach64GetLCDReg(LCD_VERT_STRETCHING); - pATIHW->lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - outr(LCD_INDEX, pATIHW->lcd_index); - } - - /* - * Don't bother with panel support if it hasn't been previously - * enabled. - */ - if ((pATI->LCDPanelID >= 0) && - !(pATIHW->horz_stretching & HORZ_STRETCH_EN) && - !(pATIHW->vert_stretching & VERT_STRETCH_EN) && - !(pATIHW->lcd_gen_ctrl & LCD_ON)) - { - /* - * At this point, if an XL or Mobility BIOS hasn't set - * panel dimensions, then there is no panel. Otherwise, - * keep any panel disabled to allow for modes greater than - * the panel's dimensions. - */ - if ((pATI->Chip >= ATI_CHIP_264XL) && - (!pATI->LCDHorizontal || !pATI->LCDVertical)) - pATI->LCDPanelID = -1; - else - pATI->OptionPanelDisplay = FALSE; - } - } - else - { - pATI->MemoryType = GetBits(IOValue, CFG_MEM_TYPE); - - /* Factor in what the BIOS says the DAC is */ - pATI->DAC = ATI_DAC(pATI->DAC, - GetBits(inr(SCRATCH_REG1), BIOS_INIT_DAC_SUBTYPE)); - } - - /* - * RAMDAC types 0 & 1 for Mach64's are different than those for - * Mach32's. - */ - if (pATI->DAC < ATI_DAC_ATI68875) - pATI->DAC += ATI_DAC_INTERNAL; - - break; - - default: - break; - } - - /* - * For Mach64 adapters, pick up, from the BIOS, the type of programmable - * clock generator (if any), and various information about it. - */ - -#ifndef AVOID_CPIO - - if (pATI->Chip >= ATI_CHIP_88800GXC) - -#endif /* AVOID_CPIO */ - - { - CARD16 ClockDac; - - /* Set up non-zero defaults */ - pATI->ClockDescriptor = ATIClockDescriptors[ATI_CLOCK_FIXED]; - pATI->ClockNumberToProgramme = -1; - - ROMTable = BIOSWord(0x48U); - if ((ROMTable < 0x0002U) || - (BIOSWord(ROMTable - 0x02U) < 0x0012U) || - ((ROMTable + BIOSWord(ROMTable - 0x02U)) > BIOSSize)) - ROMTable = 0; - - if (ROMTable > 0) - { - ClockTable = BIOSWord(ROMTable + 0x10U); - if ((ClockTable + 0x20U) > BIOSSize) - ClockTable = 0; - - if (BIOSWord(ROMTable - 0x02U) >= 0x0048U) - { - VideoTable = BIOSWord(ROMTable + 0x46U); - if ((VideoTable < 0x08U) || - (BIOSByte(VideoTable - 0x01U) < 0x08U) || - (BIOSByte(VideoTable - 0x02U) > 0x01U) || - ((VideoTable + BIOSByte(VideoTable - 0x01U)) > BIOSSize)) - VideoTable = 0; - } - - if (BIOSWord(ROMTable - 0x02U) >= 0x004AU) - { - HardwareTable = BIOSWord(ROMTable + 0x48U); - if (((HardwareTable + 0x08U) <= BIOSSize) && - !memcmp(BIOS + HardwareTable, "$ATI", 4)) - pATI->I2CType = BIOSByte(HardwareTable + 0x06U) & 0x0FU; - else - HardwareTable = 0; - } - } - - if (ClockTable > 0) - { - FrequencyTable = BIOSWord(ClockTable - 0x02U); - if ((FrequencyTable > 0) && - ((FrequencyTable + 0x20U) <= BIOSSize)) - { - for (i = 0; i < 16; i++) - { - pATI->BIOSClocks[i] = BIOSWord(FrequencyTable); - FrequencyTable += 2; - } - } - pATI->ProgrammableClock = BIOSByte(ClockTable); - pATI->ClockNumberToProgramme = BIOSByte(ClockTable + 0x06U); - switch (BIOSWord(ClockTable + 0x08U) / 10) - { - case 143: - pATI->ReferenceNumerator = 157500; - pATI->ReferenceDenominator = 11; - break; - - case 286: - pATI->ReferenceNumerator = 315000; - pATI->ReferenceDenominator = 11; - break; - - default: - pATI->ReferenceNumerator = - BIOSWord(ClockTable + 0x08U) * 10; - pATI->ReferenceDenominator = 1; - break; - } - } - else - { - /* - * Compensate for BIOS absence. Note that the reference - * frequency has already been set by option processing. - */ - if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL) - { - pATI->ProgrammableClock = ATI_CLOCK_INTERNAL; - } - else switch (pATI->DAC) - { - case ATI_DAC_STG1703: - pATI->ProgrammableClock = ATI_CLOCK_STG1703; - break; - - case ATI_DAC_CH8398: - pATI->ProgrammableClock = ATI_CLOCK_CH8398; - break; - - case ATI_DAC_ATT20C408: - pATI->ProgrammableClock = ATI_CLOCK_ATT20C408; - break; - - case ATI_DAC_IBMRGB514: - pATI->ProgrammableClock = ATI_CLOCK_IBMRGB514; - break; - - default: /* Provisional */ - pATI->ProgrammableClock = ATI_CLOCK_ICS2595; - break; - } - - /* This should be safe for all generators except IBM's RGB514 */ - pATI->ClockNumberToProgramme = 3; - } - - if ((pATI->ProgrammableClock > ATI_CLOCK_FIXED) && - (pATI->ProgrammableClock < ATI_CLOCK_MAX)) - { - /* - * Graphics PRO TURBO 1600's are unusual in that an ICS2595 is used - * to generate clocks for VGA modes, and an IBM RGB514 is used for - * accelerator modes. - */ - if ((pATI->ProgrammableClock == ATI_CLOCK_ICS2595) && - (pATI->DAC == ATI_DAC_IBMRGB514) && - (pScreenInfo->depth >= 8) && - (pATI->Chipset == ATI_CHIPSET_ATI)) - pATI->ProgrammableClock = ATI_CLOCK_IBMRGB514; - - pATI->ClockDescriptor = - ATIClockDescriptors[pATI->ProgrammableClock]; - } - - ClockDac = pATI->DAC; - switch (pATI->ProgrammableClock) - { - case ATI_CLOCK_ICS2595: - /* - * Pick up reference divider (43 or 46) appropriate to the chip - * revision level. - */ - if (ClockTable > 0) - pATI->ClockDescriptor.MinM = - pATI->ClockDescriptor.MaxM = - BIOSWord(ClockTable + 0x0AU); - else if (!xf86NameCmp(pGDev->clockchip, "ATI 18818-0")) - pATI->ClockDescriptor.MinM = - pATI->ClockDescriptor.MaxM = 43; - else if (!xf86NameCmp(pGDev->clockchip, "ATI 18818-1")) - pATI->ClockDescriptor.MinM = - pATI->ClockDescriptor.MaxM = 46; - else - pATI->ProgrammableClock = ATI_CLOCK_UNKNOWN; - break; - - case ATI_CLOCK_STG1703: - /* This one's also a RAMDAC */ - ClockDac = ATI_DAC_STG1703; - break; - - case ATI_CLOCK_CH8398: - /* This one's also a RAMDAC */ - ClockDac = ATI_DAC_CH8398; - break; - - case ATI_CLOCK_INTERNAL: - /* - * The reference divider has already been programmed by BIOS - * initialisation. Because, there is only one reference - * divider for all generated frequencies (including MCLK), it - * cannot be changed without reprogramming all clocks every - * time one of them needs a different reference divider. - * - * Besides, it's not a good idea to change the reference - * divider. BIOS initialisation sets it to a value that - * effectively prevents generating frequencies beyond the - * graphics controller's tolerance. - */ - pATI->ClockDescriptor.MinM = pATI->ClockDescriptor.MaxM = - ATIMach64GetPLLReg(PLL_REF_DIV); - - /* The DAC is also integrated */ - if ((pATI->DAC & ~0x0FU) != ATI_DAC_INTERNAL) - ClockDac = ATI_DAC_INTERNAL; - - break; - - case ATI_CLOCK_ATT20C408: - /* This one's also a RAMDAC */ - ClockDac = ATI_DAC_ATT20C408; - break; - - case ATI_CLOCK_IBMRGB514: - /* This one's also a RAMDAC */ - ClockDac = ATI_DAC_IBMRGB514; - pATI->ClockNumberToProgramme = 7; - break; - - default: - break; - } - - /* - * We now have up to two indications of what RAMDAC the adapter uses. - * They should be the same. The following test and corresponding - * action are under construction. - */ - if (pATI->DAC != ClockDac) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Mach64 RAMDAC probe discrepancy detected:\n" - " DAC=0x%02X; ClockDac=0x%02X.\n", - pATI->DAC, ClockDac); - - if (pATI->DAC == ATI_DAC_IBMRGB514) - { - pATI->ProgrammableClock = ATI_CLOCK_IBMRGB514; - pATI->ClockDescriptor = - ATIClockDescriptors[ATI_CLOCK_IBMRGB514]; - pATI->ClockNumberToProgramme = 7; - } - else - { - pATI->DAC = ClockDac; /* For now */ - } - } - - /* - * Pick up multimedia information, which will be at different - * displacements depending on table revision. - */ - if (VideoTable > 0) - { - switch (BIOSByte(VideoTable - 0x02U)) - { - case 0x00U: - pATI->Tuner = BIOSByte(VideoTable) & 0x1FU; - - /* - * XXX The VideoTable[1] byte is known to have been - * omitted in LTPro and Mobility BIOS'es. Any others? - */ - switch (pATI->Chip) - { - case ATI_CHIP_264LTPRO: - case ATI_CHIP_MOBILITY: - pATI->Decoder = - BIOSByte(VideoTable + 0x01U) & 0x07U; - pATI->Audio = - BIOSByte(VideoTable + 0x02U) & 0x0FU; - break; - - default: - pATI->Decoder = - BIOSByte(VideoTable + 0x02U) & 0x07U; - pATI->Audio = - BIOSByte(VideoTable + 0x03U) & 0x0FU; - break; - } - - break; - - case 0x01U: - pATI->Tuner = BIOSByte(VideoTable) & 0x1FU; - pATI->Audio = BIOSByte(VideoTable + 0x01U) & 0x0FU; - pATI->Decoder = BIOSByte(VideoTable + 0x05U) & 0x0FU; - break; - - default: - break; - } - } - - /* Determine panel dimensions */ - if (pATI->LCDPanelID >= 0) - { - LCDTable = BIOSWord(0x78U); - if ((LCDTable + BIOSByte(LCDTable + 5)) > BIOSSize) - LCDTable = 0; - - if (LCDTable > 0) - { - LCDPanelInfo = BIOSWord(LCDTable + 0x0AU); - if (((LCDPanelInfo + 0x1DU) > BIOSSize) || - ((BIOSByte(LCDPanelInfo) != pATI->LCDPanelID) && - (pATI->LCDPanelID || (BIOSByte(LCDPanelInfo) > 0x1FU) || - (pATI->Chip <= ATI_CHIP_264LTPRO)))) - LCDPanelInfo = 0; - } - - if (!LCDPanelInfo) - { - /* - * Scan BIOS for panel info table. - */ - for (i = 0; i <= (int)(BIOSSize - 0x1DU); i++) - { - /* Look for panel ID ... */ - if ((BIOSByte(i) != pATI->LCDPanelID) && - (pATI->LCDPanelID || (BIOSByte(i) > 0x1FU) || - (pATI->Chip <= ATI_CHIP_264LTPRO))) - continue; - - /* ... followed by 24-byte panel model name ... */ - for (j = 0; j < 24; j++) - { - if ((CARD8)(BIOSByte(i + j + 1) - 0x20U) > 0x5FU) - { - i += j; - goto NextBIOSByte; - } - } - - /* ... verify panel width ... */ - if (pATI->LCDHorizontal && - (pATI->LCDHorizontal != BIOSWord(i + 0x19U))) - continue; - - /* ... and verify panel height */ - if (pATI->LCDVertical && - (pATI->LCDVertical != BIOSWord(i + 0x1BU))) - continue; - - if (LCDPanelInfo) - { - /* - * More than one possibility, but don't care if all - * tables describe panels of the same size. - */ - if ((BIOSByte(LCDPanelInfo + 0x19U) == - BIOSByte(i + 0x19U)) && - (BIOSByte(LCDPanelInfo + 0x1AU) == - BIOSByte(i + 0x1AU)) && - (BIOSByte(LCDPanelInfo + 0x1BU) == - BIOSByte(i + 0x1BU)) && - (BIOSByte(LCDPanelInfo + 0x1CU) == - BIOSByte(i + 0x1CU))) - continue; - - LCDPanelInfo = 0; - break; - } - - LCDPanelInfo = i; - - NextBIOSByte: ; - } - } - - if (LCDPanelInfo > 0) - { - pATI->LCDPanelID = BIOSByte(LCDPanelInfo); - pATI->LCDHorizontal = BIOSWord(LCDPanelInfo + 0x19U); - pATI->LCDVertical = BIOSWord(LCDPanelInfo + 0x1BU); - } - } - - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3, - "BIOS Data: BIOSSize=0x%04X, ROMTable=0x%04X.\n", - BIOSSize, ROMTable); - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3, - "BIOS Data: ClockTable=0x%04X, FrequencyTable=0x%04X.\n", - ClockTable, FrequencyTable); - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3, - "BIOS Data: LCDTable=0x%04X, LCDPanelInfo=0x%04X.\n", - LCDTable, LCDPanelInfo); - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3, - "BIOS Data: VideoTable=0x%04X, HardwareTable=0x%04X.\n", - VideoTable, HardwareTable); - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3, - "BIOS Data: I2CType=0x%02X, Tuner=0x%02X, Decoder=0x%02X," - " Audio=0x%02X.\n", - pATI->I2CType, pATI->Tuner, pATI->Decoder, pATI->Audio); - } - - ATIUnlock(pATI); /* Unlock registers */ - -#ifndef AVOID_CPIO - - /* Sometimes, the BIOS lies about the chip */ - if ((pATI->Chip >= ATI_CHIP_28800_4) && (pATI->Chip <= ATI_CHIP_28800_6)) - { - IOValue = GetBits(ATIGetExtReg(0xAAU), 0x0FU) + - (ATI_CHIP_28800_4 - 4); - if ((IOValue <= ATI_CHIP_28800_6) && (IOValue > pATI->Chip)) - pATI->Chip = IOValue; - } - -#endif /* AVOID_CPIO */ - - /* Report what was found */ - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s graphics controller detected.\n", ATIChipNames[pATI->Chip]); - -#ifndef AVOID_CPIO - - if ((pATI->Chip >= ATI_CHIP_68800) && (pATI->Chip != ATI_CHIP_68800_3)) - -#endif /* AVOID_CPIO */ - - { - Message = Buffer + snprintf(Buffer, SizeOf(Buffer), "Chip type %04X", - pATI->ChipType); - if (!(pATI->ChipType & ~(CHIP_CODE_0 | CHIP_CODE_1))) - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - " (%c%c)", - GetBits(pATI->ChipType, CHIP_CODE_1) + 0x41U, - GetBits(pATI->ChipType, CHIP_CODE_0) + 0x41U); - else if ((pATI->ChipType & 0x4040U) == 0x4040U) - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - " \"%c%c\"", - GetByte(pATI->ChipType, 1), GetByte(pATI->ChipType, 0)); - if ((pATI->Chip >= ATI_CHIP_264CT) && (pATI->Chip != ATI_CHIP_Mach64)) - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - ", version %d, foundry %s", - pATI->ChipVersion, ATIFoundryNames[pATI->ChipFoundry]); - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s, class %d, revision 0x%02X.\n", - Buffer, pATI->ChipClass, pATI->ChipRevision); - } - -#ifndef AVOID_CPIO - - if (pATI->Adapter >= ATI_ADAPTER_MACH8) - -#endif /* AVOID_CPIO */ - - { - Message = Buffer + snprintf(Buffer, SizeOf(Buffer), - "%s bus interface detected", ATIBusNames[pATI->BusType]); - -#ifndef AVOID_CPIO - - if (pATI->Adapter >= ATI_ADAPTER_MACH64) - { - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - "; %s I/O base is 0x%04lX", - (pATI->CPIODecoding == SPARSE_IO) ? "sparse" : "block", - pATI->CPIOBase); - } - -#endif /* AVOID_CPIO */ - - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, "%s.\n", Buffer); - } - -#ifndef AVOID_CPIO - - if (pATI->CPIO_VGAWonder) - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "VGA Wonder registers at I/O port 0x%04X.\n", - pATI->CPIO_VGAWonder); - - if (pATI->Coprocessor != ATI_CHIP_NONE) - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s graphics accelerator detected,\n with %d kB of coprocessor" - " memory.\n", - ATIChipNames[pATI->Coprocessor], pATI->VideoRAM); - -#endif /* AVOID_CPIO */ - - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s adapter detected.\n", ATIAdapterNames[pATI->Adapter]); - - if (pATI->Chip >= ATI_CHIP_264GT) - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "For information on using the multimedia capabilities\n of this" - " adapter, please see http://gatos.sf.net.\n"); - - if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "Internal RAMDAC (subtype %d) detected.\n", pATI->DAC & 0x0FU); - } - else - { - const SymTabRec *DAC; - - for (DAC = ATIDACDescriptors; ; DAC++) - { - if (pATI->DAC == DAC->token) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s RAMDAC detected.\n", DAC->name); - break; - } - - if (pATI->DAC < DAC->token) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0, - "Unknown RAMDAC type 0x%02X detected.\n", pATI->DAC); - break; - } - } - } - -#ifdef AVOID_CPIO - - if (!xf86LinearVidMem()) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "A linear aperture is not available.\n"); - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - -#endif /* AVOID_CPIO */ - - /* - * Set colour weights. - */ - - if (pATI->Chip < ATI_CHIP_264CT) - pScreenInfo->rgbBits = 6; - else - pScreenInfo->rgbBits = 8; - pATI->rgbBits = pScreenInfo->rgbBits; - if (!xf86SetWeight(pScreenInfo, defaultWeight, defaultWeight)) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - if ((pScreenInfo->depth > 8) && - ((pScreenInfo->weight.red != pScreenInfo->weight.blue) || - (pScreenInfo->weight.red != (CARD32)(pScreenInfo->depth / 3)) || - ((CARD32)pScreenInfo->depth != (pScreenInfo->weight.red + - pScreenInfo->weight.green + - pScreenInfo->weight.blue)))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Driver does not support weight %d%d%d for depth %d.\n", - pScreenInfo->weight.red, pScreenInfo->weight.green, - pScreenInfo->weight.blue, pScreenInfo->depth); - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - /* - * Set default visual. - */ - - if (!xf86SetDefaultVisual(pScreenInfo, -1)) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - if ((pScreenInfo->depth > 8) && - (((pScreenInfo->defaultVisual | DynamicClass) != DirectColor) || - ((pScreenInfo->defaultVisual == DirectColor) && - (pATI->DAC == ATI_DAC_INTERNAL)))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Driver does not support default visual %s for depth %d.\n", - xf86GetVisualName(pScreenInfo->defaultVisual), - pScreenInfo->depth); - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - /* - * Set colour gamma. - */ - -#ifndef AVOID_CPIO - - if (pScreenInfo->depth > 1) - -#endif /* AVOID_CPIO */ - - { - if (!xf86SetGamma(pScreenInfo, defaultGamma)) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - } - - pATI->depth = pScreenInfo->depth; - pATI->bitsPerPixel = pScreenInfo->bitsPerPixel; - pATI->weight = pScreenInfo->weight; - pATI->XModifier = pATI->bitsPerPixel / UnitOf(pATI->bitsPerPixel); - - /* - * Determine which CRT controller to use for video modes. - */ - -#ifndef AVOID_CPIO - - if ((pATI->Chip >= ATI_CHIP_88800GXC) && - (pATI->depth >= 8) && - (pATI->Chipset == ATI_CHIPSET_ATI)) - -#endif /* AVOID_CPIO */ - - { - pATI->NewHW.crtc = ATI_CRTC_MACH64; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using Mach64 accelerator CRTC.\n"); - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - /* - * No need for VGA I/O resources during operating state (but they - * are still decoded). - */ - pResources = - xf86SetOperatingState(resVgaIo, pATI->iEntity, ResUnusedOpr); - if (pResources) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Logic error setting operating state for VGA I/O.\n"); - xf86FreeResList(pResources); - } - - if (pATI->CPIO_VGAWonder) - { - pResources = xf86SetOperatingState(pATI->VGAWonderResources, - pATI->iEntity, ResUnusedOpr); - if (pResources) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Logic error setting operating state for" - " VGAWonder I/O.\n"); - xf86FreeResList(pResources); - } - } - } - -#endif /* AVOID_CPIO */ - - } - -#ifndef AVOID_CPIO - - else - { - pATI->NewHW.crtc = ATI_CRTC_VGA; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using VGA CRTC.\n"); - } - - /* Complain if VGA is needed but not there */ - if ((pATI->NewHW.crtc == ATI_CRTC_VGA) || !pATI->OptionLinear) - { - /* VGA is required at this point */ - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "VGA is not available through this adapter.\n"); - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - if (pATI->Coprocessor != ATI_CHIP_NONE) - { - /* Ignore any 8514/A or Mach8 accelerator from this point on */ - pATI->Adapter = pATI->VGAAdapter; - - /* Accelerator and VGA cannot share memory */ - pATI->VideoRAM = 0; - } - } - -#endif /* AVOID_CPIO */ - - /* - * Decide between the CRT and the panel. - */ - if (pATI->LCDPanelID >= 0) - { - if (!pATI->OptionPanelDisplay) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_CONFIG, - "Using CRT interface and disabling digital flat panel.\n"); - } - else - { - int HDisplay, VDisplay; - CARD8 ClockMask, PostMask; - - /* - * Determine porch data. This groks the mode on entry to extract - * the width and position of its sync and blanking pulses, and - * considers any overscan as part of the displayed area, given that - * the overscan is also stretched. - * - * This also attempts to determine panel dimensions but cannot do - * so for one that is "auto-stretched". - */ - - if (pATI->Chip == ATI_CHIP_264LT) - { - pATIHW->lcd_gen_ctrl = inr(LCD_GEN_CTRL); - - /* Set up to read non-shadow registers */ - if (pATIHW->lcd_gen_ctrl & SHADOW_RW_EN) - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl & ~SHADOW_RW_EN); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - pATIHW->lcd_index = inr(LCD_INDEX); - pATIHW->config_panel = ATIMach64GetLCDReg(LCD_CONFIG_PANEL); - pATIHW->lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - - /* Set up to read non-shadow registers */ - if (pATIHW->lcd_gen_ctrl & SHADOW_RW_EN) - ATIMach64PutLCDReg(LCD_GEN_CNTL, - pATIHW->lcd_gen_ctrl & ~SHADOW_RW_EN); - } - -#ifndef AVOID_CPIO - - if (!(pATIHW->crtc_gen_cntl & CRTC_EXT_DISP_EN)) - { - pATIHW->clock = (inb(R_GENMO) & 0x0CU) >> 2; - - pATIHW->crt[0] = GetReg(CRTX(pATI->CPIO_VGABase), 0x00U); - pATIHW->crt[2] = GetReg(CRTX(pATI->CPIO_VGABase), 0x02U); - pATIHW->crt[3] = GetReg(CRTX(pATI->CPIO_VGABase), 0x03U); - pATIHW->crt[4] = GetReg(CRTX(pATI->CPIO_VGABase), 0x04U); - pATIHW->crt[5] = GetReg(CRTX(pATI->CPIO_VGABase), 0x05U); - pATIHW->crt[6] = GetReg(CRTX(pATI->CPIO_VGABase), 0x06U); - pATIHW->crt[7] = GetReg(CRTX(pATI->CPIO_VGABase), 0x07U); - pATIHW->crt[9] = GetReg(CRTX(pATI->CPIO_VGABase), 0x09U); - pATIHW->crt[16] = GetReg(CRTX(pATI->CPIO_VGABase), 0x10U); - pATIHW->crt[17] = GetReg(CRTX(pATI->CPIO_VGABase), 0x11U); - pATIHW->crt[21] = GetReg(CRTX(pATI->CPIO_VGABase), 0x15U); - pATIHW->crt[22] = GetReg(CRTX(pATI->CPIO_VGABase), 0x16U); - - /* Switch to shadow registers */ - if (pATI->Chip == ATI_CHIP_264LT) - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl | SHADOW_RW_EN); - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - ATIMach64PutLCDReg(LCD_GEN_CNTL, - pATIHW->lcd_gen_ctrl | SHADOW_RW_EN); - - pATIHW->shadow_vga[0] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x00U); - pATIHW->shadow_vga[2] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x02U); - pATIHW->shadow_vga[3] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x03U); - pATIHW->shadow_vga[4] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x04U); - pATIHW->shadow_vga[5] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x05U); - pATIHW->shadow_vga[6] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x06U); - pATIHW->shadow_vga[7] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x07U); - pATIHW->shadow_vga[9] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x09U); - pATIHW->shadow_vga[16] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x10U); - pATIHW->shadow_vga[17] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x11U); - pATIHW->shadow_vga[21] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x15U); - pATIHW->shadow_vga[22] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x16U); - - /* - * HSyncStart and HSyncEnd should equal their shadow - * counterparts. Otherwise, due to a chip bug, the panel might - * not sync, regardless of which register set is used to drive - * the panel. There are certain combinations of register - * values where the panel does in fact sync, but it remains - * impossible to accurately determine the horizontal sync pulse - * timing actually seen by the panel. - * - * Note that this hardware bug does not affect the CRT output. - */ - if ((pATIHW->crt[4] != pATIHW->shadow_vga[4]) || - ((pATIHW->crt[5] ^ pATIHW->shadow_vga[5]) & 0x1FU)) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_NOTICE, 0, - "Invalid horizontal sync pulse timing detected in mode" - " on server entry.\n"); - - /* Don't trust input timing */ - pATI->OptionLCDSync = TRUE; - ModeType = 0; - } - - /* Merge in shadow registers as appropriate */ - if (pATIHW->lcd_gen_ctrl & SHADOW_EN) - { - pATIHW->crt[0] = pATIHW->shadow_vga[0]; - pATIHW->crt[2] = pATIHW->shadow_vga[2]; - pATIHW->crt[3] = pATIHW->shadow_vga[3]; - pATIHW->crt[4] = pATIHW->shadow_vga[4]; - pATIHW->crt[5] = pATIHW->shadow_vga[5]; - - if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR)) - { - pATIHW->crt[6] = pATIHW->shadow_vga[6]; - pATIHW->crt[7] &= ~0x29U; - pATIHW->crt[7] |= pATIHW->shadow_vga[7] & 0x29U; - pATIHW->crt[9] &= ~0x20U; - pATIHW->crt[9] |= pATIHW->shadow_vga[9] & 0x20U; - pATIHW->crt[21] = pATIHW->shadow_vga[21]; - pATIHW->crt[22] = pATIHW->shadow_vga[22]; - } - } - - if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR)) - { - pATIHW->crt[7] &= ~0x84U; - pATIHW->crt[7] |= pATIHW->shadow_vga[7] & 0x84U; - pATIHW->crt[16] = pATIHW->shadow_vga[16]; - pATIHW->crt[17] &= ~0x0FU; - pATIHW->crt[17] |= pATIHW->shadow_vga[17] & 0x0FU; - } - - pATI->LCDHSyncWidth = - (pATIHW->crt[5] - pATIHW->crt[4]) & 0x1FU; - pATI->LCDHBlankWidth = (((pATIHW->crt[3] & 0x1FU) | - ((pATIHW->crt[5] >> 2) & 0x20U)) - - pATIHW->crt[2]) & 0x3FU; - pATI->LCDVSyncWidth = - (pATIHW->crt[17] - pATIHW->crt[16]) & 0x0FU; - pATI->LCDVBlankWidth = - ((pATIHW->crt[22] - pATIHW->crt[21]) & 0xFFU) + 1; - - pATI->LCDHSyncStart = - ((pATIHW->crt[4] - pATIHW->crt[2]) & 0xFFU) + 1; - pATI->LCDVSyncStart = (((((pATIHW->crt[7] << 2) & 0x0200U) | - ((pATIHW->crt[7] << 6) & 0x0100U) | - pATIHW->crt[16]) - - (((pATIHW->crt[9] << 4) & 0x0200U) | - ((pATIHW->crt[7] << 5) & 0x0100U) | - pATIHW->crt[21])) & 0xFFU) + 1; - - HDisplay = pATI->LCDHSyncStart + pATI->LCDHSyncWidth - - pATI->LCDHBlankWidth; - if (HDisplay > 0) - pATI->LCDHBlankWidth += (HDisplay + 0x3FU) & ~0x3FU; - VDisplay = pATI->LCDVSyncStart + pATI->LCDVSyncWidth - - pATI->LCDVBlankWidth; - if (VDisplay > 0) - pATI->LCDVBlankWidth += (VDisplay + 0xFFU) & ~0xFFU; - - HDisplay = pATIHW->crt[0] + 5 - pATI->LCDHBlankWidth; - VDisplay = (((pATIHW->crt[7] << 4) & 0x0200U) | - ((pATIHW->crt[7] << 8) & 0x0100U) | - pATIHW->crt[6]) + 3 - pATI->LCDVBlankWidth; - } - else - -#endif /* AVOID_CPIO */ - - { - pATIHW->clock = inr(CLOCK_CNTL) & 0x03U; - - pATIHW->crtc_h_total_disp = inr(CRTC_H_TOTAL_DISP); - pATIHW->crtc_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID); - pATIHW->crtc_v_total_disp = inr(CRTC_V_TOTAL_DISP); - pATIHW->crtc_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID); - pATIHW->ovr_wid_left_right = inr(OVR_WID_LEFT_RIGHT); - pATIHW->ovr_wid_top_bottom = inr(OVR_WID_TOP_BOTTOM); - - /* Switch to shadow registers */ - if (pATI->Chip == ATI_CHIP_264LT) - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl | SHADOW_RW_EN); - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - ATIMach64PutLCDReg(LCD_GEN_CNTL, - pATIHW->lcd_gen_ctrl | SHADOW_RW_EN); - - /* Oddly enough, there are no shadow overscan registers */ - pATIHW->shadow_h_total_disp = inr(CRTC_H_TOTAL_DISP); - pATIHW->shadow_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID); - pATIHW->shadow_v_total_disp = inr(CRTC_V_TOTAL_DISP); - pATIHW->shadow_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID); - - /* - * HSyncStart and HSyncEnd should equal their shadow - * counterparts. Otherwise, due to a chip bug, the panel might - * not sync, regardless of which register set is used to drive - * the panel. There are certain combinations of register - * values where the panel does in fact sync, but it remains - * impossible to accurately determine the horizontal sync pulse - * timing actually seen by the panel. - * - * Note that this hardware bug does not affect the CRT output. - */ - if (((pATIHW->crtc_h_sync_strt_wid ^ - pATIHW->shadow_h_sync_strt_wid) & - (CRTC_H_SYNC_STRT | CRTC_H_SYNC_STRT_HI | - CRTC_H_SYNC_WID))) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_NOTICE, 0, - "Invalid horizontal sync pulse timing detected in mode" - " on server entry.\n"); - - /* Don't trust input timing */ - pATI->OptionLCDSync = TRUE; - ModeType = 0; - } - - /* Merge in shadow registers as appropriate */ - if (pATIHW->lcd_gen_ctrl & SHADOW_EN) - { - /* XXX What about the LT? */ - if ((pATI->Chip < ATI_CHIP_264LTPRO) || - !(pATIHW->config_panel & DONT_SHADOW_HEND)) - { - pATIHW->crtc_h_total_disp &= ~CRTC_H_DISP; - pATIHW->crtc_h_total_disp |= - pATIHW->shadow_h_total_disp & CRTC_H_DISP; - } - - pATIHW->crtc_h_total_disp &= ~CRTC_H_TOTAL; - pATIHW->crtc_h_total_disp |= - pATIHW->shadow_h_total_disp & CRTC_H_TOTAL; - pATIHW->crtc_h_sync_strt_wid &= - ~(CRTC_H_SYNC_STRT | CRTC_H_SYNC_STRT_HI | - CRTC_H_SYNC_WID); - pATIHW->crtc_h_sync_strt_wid |= - pATIHW->shadow_h_sync_strt_wid & - (CRTC_H_SYNC_STRT | CRTC_H_SYNC_STRT_HI | - CRTC_H_SYNC_WID); - - if (pATIHW->lcd_gen_ctrl & USE_SHADOWED_VEND) - { - pATIHW->crtc_v_total_disp &= ~CRTC_V_DISP; - pATIHW->crtc_v_total_disp |= - pATIHW->shadow_v_total_disp & CRTC_V_DISP; - } - - if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR)) - { - pATIHW->crtc_v_total_disp &= ~CRTC_V_TOTAL; - pATIHW->crtc_v_total_disp |= - pATIHW->shadow_v_total_disp & CRTC_V_TOTAL; - } - } - - if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR)) - { - pATIHW->crtc_v_sync_strt_wid &= - ~(CRTC_V_SYNC_STRT | CRTC_V_SYNC_WID); - pATIHW->crtc_v_sync_strt_wid |= - pATIHW->shadow_v_sync_strt_wid & - (CRTC_V_SYNC_STRT | CRTC_V_SYNC_WID); - } - - HDisplay = GetBits(pATIHW->crtc_h_total_disp, CRTC_H_DISP) + - GetBits(pATIHW->ovr_wid_left_right, OVR_WID_LEFT) + - GetBits(pATIHW->ovr_wid_left_right, OVR_WID_RIGHT); - VDisplay = GetBits(pATIHW->crtc_v_total_disp, CRTC_V_DISP) + - GetBits(pATIHW->ovr_wid_top_bottom, OVR_WID_TOP) + - GetBits(pATIHW->ovr_wid_top_bottom, OVR_WID_BOTTOM); - - pATI->LCDHSyncStart = - (GetBits(pATIHW->crtc_h_sync_strt_wid, - CRTC_H_SYNC_STRT_HI) * - (MaxBits(CRTC_H_SYNC_STRT) + 1)) + - GetBits(pATIHW->crtc_h_sync_strt_wid, CRTC_H_SYNC_STRT) - - HDisplay; - pATI->LCDHSyncWidth = - GetBits(pATIHW->crtc_h_sync_strt_wid, CRTC_H_SYNC_WID); - pATI->LCDHBlankWidth = - GetBits(pATIHW->crtc_h_total_disp, CRTC_H_TOTAL) - - HDisplay; - pATI->LCDVSyncStart = - GetBits(pATIHW->crtc_v_sync_strt_wid, CRTC_V_SYNC_STRT) - - VDisplay; - pATI->LCDVSyncWidth = - GetBits(pATIHW->crtc_v_sync_strt_wid, CRTC_V_SYNC_WID); - pATI->LCDVBlankWidth = - GetBits(pATIHW->crtc_v_total_disp, CRTC_V_TOTAL) - - VDisplay; - - HDisplay++; - VDisplay++; - } - - /* Restore LCD registers */ - if (pATI->Chip == ATI_CHIP_264LT) - { - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - ATIMach64PutLCDReg(LCD_GEN_CNTL, pATIHW->lcd_gen_ctrl); - outr(LCD_INDEX, pATIHW->lcd_index); - } - - HDisplay <<= 3; - pATI->LCDHSyncStart <<= 3; - pATI->LCDHSyncWidth <<= 3; - pATI->LCDHBlankWidth <<= 3; - - /* Calculate panel dimensions implied by the input timing */ - if ((pATIHW->horz_stretching & - (HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) == - HORZ_STRETCH_EN) - { - if (pATIHW->horz_stretching & HORZ_STRETCH_MODE) - { - if (pATIHW->horz_stretching & HORZ_STRETCH_BLEND) - { - HDisplay = - (HDisplay * (MaxBits(HORZ_STRETCH_BLEND) + 1)) / - GetBits(pATIHW->horz_stretching, - HORZ_STRETCH_BLEND); - } - } - else if (((pATIHW->horz_stretching & HORZ_STRETCH_LOOP) > - HORZ_STRETCH_LOOP15) || - (pATIHW->horz_stretching & - SetBits(1, HORZ_STRETCH_RATIO))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Ignoring invalid horizontal stretch ratio in mode on" - " server entry.\n"); - } - else - { - IOValue = - GetBits(pATIHW->horz_stretching, HORZ_STRETCH_RATIO); - - switch (GetBits(pATIHW->horz_stretching, - HORZ_STRETCH_LOOP)) - { - case GetBits(HORZ_STRETCH_LOOP09, HORZ_STRETCH_LOOP): - i = 9; - IOValue &= (1 << 9) - 1; - break; - - case GetBits(HORZ_STRETCH_LOOP11, HORZ_STRETCH_LOOP): - i = 11; - IOValue &= (1 << 11) - 1; - break; - - case GetBits(HORZ_STRETCH_LOOP12, HORZ_STRETCH_LOOP): - i = 12; - IOValue &= (1 << 12) - 1; - break; - - case GetBits(HORZ_STRETCH_LOOP14, HORZ_STRETCH_LOOP): - i = 14; - IOValue &= (1 << 14) - 1; - break; - - case GetBits(HORZ_STRETCH_LOOP15, HORZ_STRETCH_LOOP): - default: /* Muffle compiler */ - i = 15; - IOValue &= (1 << 15) - 1; - break; - } - - if (IOValue) - { - /* Count the number of bits in IOValue */ - j = (IOValue >> 1) & 0x36DBU; - j = IOValue - j - ((j >> 1) & 0x36DBU); - j = ((j + (j >> 3)) & 0x71C7U) % 0x3FU; - - HDisplay = (HDisplay * i) / j; - } - } - } - - if ((pATIHW->vert_stretching & VERT_STRETCH_EN) && - !(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO)) - { - if ((pATIHW->vert_stretching & VERT_STRETCH_USE0) || - (VDisplay <= 350)) - IOValue = - GetBits(pATIHW->vert_stretching, VERT_STRETCH_RATIO0); - else if (VDisplay <= 400) - IOValue = - GetBits(pATIHW->vert_stretching, VERT_STRETCH_RATIO1); - else if ((VDisplay <= 480) || - !(pATIHW->ext_vert_stretch & VERT_STRETCH_RATIO3)) - IOValue = - GetBits(pATIHW->vert_stretching, VERT_STRETCH_RATIO2); - else - IOValue = - GetBits(pATIHW->ext_vert_stretch, VERT_STRETCH_RATIO3); - - if (IOValue) - VDisplay = - (VDisplay * (MaxBits(VERT_STRETCH_RATIO0) + 1)) / - IOValue; - } - - /* Match calculated dimensions to probed dimensions */ - if (!pATI->LCDHorizontal) - { - if ((pATIHW->horz_stretching & - (HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) != - (HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) - pATI->LCDHorizontal = HDisplay; - } - else if (pATI->LCDHorizontal != HDisplay) - { - if ((pATIHW->horz_stretching & - (HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) != - (HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Inconsistent panel horizontal dimension:" - " %d and %d.\n", pATI->LCDHorizontal, HDisplay); - HDisplay = pATI->LCDHorizontal; - } - - if (!pATI->LCDVertical) - { - if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) || - !(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO)) - pATI->LCDVertical = VDisplay; - } - else if (pATI->LCDVertical != VDisplay) - { - if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) || - !(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO)) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Inconsistent panel vertical dimension: %d and %d.\n", - pATI->LCDVertical, VDisplay); - VDisplay = pATI->LCDVertical; - } - - if (!pATI->LCDHorizontal || !pATI->LCDVertical) - { - if (pATI->LCDPanelID || (pATI->Chip <= ATI_CHIP_264LTPRO)) - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Unable to determine dimensions of panel (ID %d).\n", - pATI->LCDPanelID); - else - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Unable to determine dimensions of panel.\n"); - - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - /* If the mode on entry wasn't stretched, adjust timings */ - if (!(pATIHW->horz_stretching & HORZ_STRETCH_EN) && - ((HDisplay = pATI->LCDHorizontal - HDisplay) > 0)) - { - pATI->LCDHSyncStart -= HDisplay; - if (pATI->LCDHSyncStart < 0) - pATI->LCDHSyncStart = 0; - pATI->LCDHBlankWidth -= HDisplay; - HDisplay = pATI->LCDHSyncStart + pATI->LCDHSyncWidth; - if (pATI->LCDHBlankWidth < HDisplay) - pATI->LCDHBlankWidth = HDisplay; - } - - if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) && - ((VDisplay = pATI->LCDVertical - VDisplay) > 0)) - { - pATI->LCDVSyncStart -= VDisplay; - if (pATI->LCDVSyncStart < 0) - pATI->LCDVSyncStart = 0; - pATI->LCDVBlankWidth -= VDisplay; - VDisplay = pATI->LCDVSyncStart + pATI->LCDVSyncWidth; - if (pATI->LCDVBlankWidth < VDisplay) - pATI->LCDVBlankWidth = VDisplay; - } - - if (pATI->LCDPanelID || (pATI->Chip <= ATI_CHIP_264LTPRO)) - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%dx%d panel (ID %d) detected.\n", - pATI->LCDHorizontal, pATI->LCDVertical, pATI->LCDPanelID); - else - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%dx%d panel detected.\n", - pATI->LCDHorizontal, pATI->LCDVertical); - - if (LCDPanelInfo) - { - for (i = 0; i < 24; i++) - Buffer[i] = BIOSByte(LCDPanelInfo + 1 + i); - for (; --i >= 0; ) - if (Buffer[i] && Buffer[i] != ' ') - { - Buffer[i + 1] = '\0'; - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "Panel model %s.\n", Buffer); - break; - } - } - - /* - * Determine panel clock. This must be done after option - * processing so that the adapter's reference frequency is always - * available. - * - * Get post divider. A GCC bug has caused the following expression - * to be broken down into its individual components. - */ - ClockMask = PLL_VCLK0_XDIV << pATIHW->clock; - PostMask = PLL_VCLK0_POST_DIV << (pATIHW->clock * 2); - i = GetBits(ATIMach64GetPLLReg(PLL_XCLK_CNTL), ClockMask); - i *= MaxBits(PLL_VCLK0_POST_DIV) + 1; - i |= GetBits(ATIMach64GetPLLReg(PLL_VCLK_POST_DIV), PostMask); - - /* Calculate clock of mode on entry */ - Numerator = ATIMach64GetPLLReg(PLL_VCLK0_FB_DIV + pATIHW->clock) * - pATI->ReferenceNumerator; - Denominator = pATI->ClockDescriptor.MinM * - pATI->ReferenceDenominator * - pATI->ClockDescriptor.PostDividers[i]; - pATI->LCDClock = ATIDivide(Numerator, Denominator, 1, 0); - - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "Panel clock is %.3f MHz.\n", - (double)(pATI->LCDClock) / 1000.0); - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using digital flat panel interface%s.\n", - pATI->OptionCRTDisplay ? - " to display on both CRT and panel" : ""); - } - } - - /* - * Finish detecting video RAM size. - */ - pScreenInfo->videoRam = pATI->VideoRAM; - -#ifndef AVOID_CPIO - - AcceleratorVideoRAM = pScreenInfo->videoRam; - if (pATI->Chip == ATI_CHIP_VGA) - { - if (pATI->depth <= 4) - VGAVideoRAM = 256; - else - VGAVideoRAM = 64; - - /* For VGA, allow a lower override */ - if ((pGDev->videoRam > 0) && (pGDev->videoRam < VGAVideoRAM)) - VGAVideoRAM = pGDev->videoRam; - } - else if (pATI->CPIO_VGAWonder) - { - /* - * XXX There's an assumption here that the values retrieved are those - * set by BIOS initialisation. - */ - if (pATI->Chip <= ATI_CHIP_18800_1) - { - VGAVideoRAM = - videoRamSizes[GetBits(ATIGetExtReg(0xBBU), 0x20U) + 1]; - if (AcceleratorVideoRAM > 512) - AcceleratorVideoRAM = 512; - } - else - { - IOValue = ATIGetExtReg(0xB0U); - if (IOValue & 0x08U) - VGAVideoRAM = 1024; - else if (IOValue & 0x10U) - VGAVideoRAM = 512; - else - VGAVideoRAM = 256; - if (AcceleratorVideoRAM > 1024) - AcceleratorVideoRAM = 1024; - } - } - - /* Check for hardware limitations */ - if (!AcceleratorVideoRAM) - { - pScreenInfo->videoRam = pATI->VideoRAM = VGAVideoRAM; - - /* - * VGA Wonder V3's, V4's and V5's don't appear to support banking in - * planar modes. - */ - if ((pATI->depth <= 4) && - (pATI->Chip <= ATI_CHIP_18800_1) && - (VGAVideoRAM > 256)) - { - if (pATI->OptionDevel) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Virtual resolutions requiring more than %s kB\n of video" - " memory might not function properly.\n", - (pATI->depth == 1) ? "64" : "256"); - } - else - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "VideoRAM reduced to 256 kB due to hardware" - " limitations.\n"); - pScreenInfo->videoRam = 256; - } - } - } - else if ((pATI->NewHW.crtc == ATI_CRTC_MACH64) || - (pATI->Chip >= ATI_CHIP_264CT)) - -#endif /* AVOID_CPIO */ - - { - -#ifndef AVOID_CPIO - - if (pATI->depth >= 8) - -#endif /* AVOID_CPIO */ - - { - /* Get adapter's linear aperture configuration */ - pATIHW->config_cntl = inr(CONFIG_CNTL); - pATI->LinearBase = - GetBits(pATIHW->config_cntl, CFG_MEM_AP_LOC) << 22; - if ((pATIHW->config_cntl & CFG_MEM_AP_SIZE) != CFG_MEM_AP_SIZE) - { - pATI->LinearSize = - GetBits(pATIHW->config_cntl, CFG_MEM_AP_SIZE) << 22; - - /* - * Linear aperture could have been disabled (but still - * assigned) by BIOS initialisation. - */ - if (pATI->LinearBase && !pATI->LinearSize) - { - if ((pATI->Chip <= ATI_CHIP_88800GXD) && - (pATI->VideoRAM < 4096)) - pATI->LinearSize = 4 * 1024 * 1024; - else - pATI->LinearSize = 8 * 1024 * 1024; - } - } - -#ifndef AVOID_CPIO - - /* Except for PCI & AGP, allow for user override */ - if (!pVideo) - { - if (pATI->Chip == ATI_CHIP_88800CX) - IOValue = ~((CARD32)((1 << 23) - 1)); - else if (pATI->Chip >= ATI_CHIP_88800GXE) - IOValue = ~((CARD32)((1 << 24) - 1)); - else if (pATI->VideoRAM >= 4096) - IOValue = ~((CARD32)((1 << 23) - 1)); - else - IOValue = ~((CARD32)((1 << 22) - 1)); - - IOValue &= pGDev->MemBase; - if (IOValue && - (IOValue <= (CARD32)(MaxBits(CFG_MEM_AP_LOC) << 22))) - pATI->LinearBase = IOValue; - - if (!pATI->LinearBase) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Linear aperture not configured. Specify \"MemBase\"" - " override in XF86Config \"Device\" section.\n"); - } - else - { - if (!pATI->LinearSize) - { - if ((pATI->Chip <= ATI_CHIP_88800GXD) && - (pATI->VideoRAM < 4096)) - pATI->LinearSize = 4 * 1024 * 1024; - else - pATI->LinearSize = 8 * 1024 * 1024; - } - - Resources[0].type = ResExcMemBlock | ResBus; - Resources[0].rBegin = pATI->LinearBase; - Resources[0].rEnd = - pATI->LinearBase + pATI->LinearSize - 1; - if (xf86RegisterResources(pATI->iEntity, Resources, - ResNone)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to register %d MB linear aperture at" - " 0x%08X.\n", pATI->LinearSize >> 10, - pATI->LinearBase); - - pATI->LinearSize = 0; - } - } - } - -#endif /* AVOID_CPIO */ - - if (pATI->LinearBase && pATI->LinearSize) - { - /* - * Unless specified in PCI configuration space, set MMIO - * address to tail end of linear aperture. - */ - if (!pATI->Block0Base) - { - pATI->Block0Base = - pATI->LinearBase + pATI->LinearSize - 0x00000400U; - pATI->MMIOInLinear = TRUE; - } - - AcceleratorVideoRAM = pATI->LinearSize >> 10; - - /* - * Account for MMIO area at the tail end of the linear - * aperture, if it is needed or if it cannot be disabled. - */ - if (pATI->MMIOInLinear || (pATI->Chip < ATI_CHIP_264VTB)) - AcceleratorVideoRAM -= 2; - - ServerVideoRAM = pATI->VideoRAM; - - if (pATI->Cursor > ATI_CURSOR_SOFTWARE) - { - /* - * Allocate a 1 kB cursor image area at the top of the - * little-endian aperture, just before any MMIO area that - * might also be there. - */ - if (ServerVideoRAM > AcceleratorVideoRAM) - ServerVideoRAM = AcceleratorVideoRAM; - - ServerVideoRAM--; - pATI->CursorOffset = ServerVideoRAM << 10; - pATI->CursorBase = pATI->LinearBase + pATI->CursorOffset; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Storing hardware cursor image at 0x%08X.\n", - pATI->CursorBase); - } - -#ifndef AVOID_CPIO - - if (pATI->OptionLinear) - -#endif /* AVOID_CPIO */ - - { - CARD32 PageSize = getpagesize() >> 10; - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - - /* - * MMIO areas must be mmap()'ed separately to avoid write - * combining them. Thus, they might not end up still - * adjacent with the little-endian linear aperture after - * mmap()'ing. So, round down the linear aperture size to - * avoid an overlap. Any hardware cursor image area might - * not end up being write combined, but this seems - * preferable to further reducing the video memory size - * advertised to the server. - * - * XXX Ideally this should be dealt with in the os-support - * layer, i.e., it should be possible to reset a - * subarea's write combining after it has been - * mmap()'ed, but doing so currently causes the removal - * of write combining for the entire aperture. - */ - if (pATI->MMIOInLinear) - AcceleratorVideoRAM -= AcceleratorVideoRAM % PageSize; - -#else /* if X_BYTE_ORDER != X_LITTLE_ENDIAN */ - - /* - * Big-endian apertures are 8 MB higher and don't contain - * an MMIO area. - */ - pATI->LinearBase += 0x00800000U; - AcceleratorVideoRAM = pATI->LinearSize >> 10; - -#endif /* X_BYTE_ORDER */ - - if (ServerVideoRAM > AcceleratorVideoRAM) - ServerVideoRAM = AcceleratorVideoRAM; - else if (AcceleratorVideoRAM > pATI->VideoRAM) - AcceleratorVideoRAM = pATI->VideoRAM; - - PageSize--; - AcceleratorVideoRAM = - (AcceleratorVideoRAM + PageSize) & ~PageSize; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using %d MB linear aperture at 0x%08X.\n", - pATI->LinearSize >> 20, pATI->LinearBase); - - /* Only mmap what is needed */ - ApertureSize = pATI->LinearSize = - AcceleratorVideoRAM << 10; - } - - if (ServerVideoRAM < pATI->VideoRAM) - { - pScreenInfo->videoRam = ServerVideoRAM; - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Virtual resolutions will be limited to %d kB\n due to" - " linear aperture size and/or placement of hardware" - " cursor image area.\n", - ServerVideoRAM); - } - } - } - -#ifndef AVOID_CPIO - - /* Set up for a banked aperture */ - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - pATI->UseSmallApertures = TRUE; - - /* Set banking functions */ - if (pATI->depth <= 4) - { - pATI->NewHW.SetBank = ATIMach64SetBankPlanar; - pATI->BankInfo.SetSourceBank = ATIMach64SetReadPlanar; - pATI->BankInfo.SetDestinationBank = ATIMach64SetWritePlanar; - pATI->BankInfo.SetSourceAndDestinationBanks = - ATIMach64SetReadWritePlanar; - } - else - { - pATI->NewHW.SetBank = ATIMach64SetBankPacked; - pATI->BankInfo.SetSourceBank = ATIMach64SetReadPacked; - pATI->BankInfo.SetDestinationBank = ATIMach64SetWritePacked; - pATI->BankInfo.SetSourceAndDestinationBanks = - ATIMach64SetReadWritePacked; - } - - /* - * Unless specified in PCI configuration space, or at the top of - * of a little-endian linear aperture, set MMIO address to the one - * just above the VGA aperture. This does not work on the CT - * (maybe others). - */ - if (!pATI->Block0Base && - ((pATI->Chip < ATI_CHIP_264CT) || - (pATI->Chip >= ATI_CHIP_264VT) || - pATI->OptionDevel)) - pATI->Block0Base = 0x000BFC00U; - } - - if (!pATI->OptionLinear) - pATI->LinearBase = 0; /* Not needed */ - -#endif /* AVOID_CPIO */ - - if (!pATI->LinearBase || !pATI->LinearSize) - { - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - -#endif /* AVOID_CPIO */ - - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Linear aperture not available.\n"); - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - -#ifndef AVOID_CPIO - - /* Insurance */ - pATI->LinearBase = pATI->LinearSize = 0; - -#endif /* AVOID_CPIO */ - - } - - if (pATI->Block0Base) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using Block 0 MMIO aperture at 0x%08X.\n", pATI->Block0Base); - - /* Set Block1 MMIO address if supported */ - if (pATI->Chip >= ATI_CHIP_264VT) - { - pATI->Block1Base = pATI->Block0Base - 0x00000400U; - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using Block 1 MMIO aperture at 0x%08X.\n", - pATI->Block1Base); - } - } - } - -#ifndef AVOID_CPIO - - else - /* - * After BIOS initialisation, the accelerator (if any) and the VGA won't - * necessarily agree on the amount of video memory, depending on whether or - * where the memory boundary is configured. Any discrepancy will be - * resolved by ATIModePreInit(). - * - * However, it's possible that there is more video memory than VGA Wonder - * can architecturally handle. - */ - if (((pATI->Chip < ATI_CHIP_68800) || (pATI->Chip > ATI_CHIP_68800AX)) && - (AcceleratorVideoRAM < pScreenInfo->videoRam)) - { - if (pATI->OptionDevel) - { - if (pATI->depth == 1) - AcceleratorVideoRAM /= 4; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Virtual resolutions requiring more than %d kB\n of video" - " memory might not function correctly.\n", - AcceleratorVideoRAM); - } - else - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "VideoRAM reduced to %d kB due to hardware limitations.\n", - AcceleratorVideoRAM); - - pScreenInfo->videoRam = AcceleratorVideoRAM; - } - } - - if (pATI->OptionLinear) - { - if (!pATI->LinearBase) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Linear aperture not supported in this configuration.\n"); - pATI->OptionLinear = FALSE; - } - else if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - /* - * Free VGA memory aperture during operating state (but it is still - * decoded). - */ - pResources = xf86SetOperatingState(resVgaMem, pATI->iEntity, - ResUnusedOpr); - if (pResources) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Logic error setting operating state for VGA memory" - " aperture.\n"); - xf86FreeResList(pResources); - } - } - } - -#endif /* AVOID_CPIO */ - - if ((pATI->Cursor > ATI_CURSOR_SOFTWARE) && !pATI->CursorBase) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to store hardware cursor image. Reverting to software" - " cursor.\n"); - pATI->Cursor = ATI_CURSOR_SOFTWARE; - } - - /* - * Remap apertures. Must lock and re-unlock around this in case the - * remapping fails. - */ - ATILock(pATI); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - if (!ATIMapApertures(pScreenInfo->scrnIndex, pATI)) - return FALSE; - - ATIUnlock(pATI); - - if (pATI->OptionAccel) - { - -#ifndef AVOID_CPIO - - if (!pATI->Block0Base || (pATI->NewHW.crtc == ATI_CRTC_VGA)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Acceleration not supported in this configuration.\n"); - pATI->OptionAccel = FALSE; - } - else - -#endif /* AVOID_CPIO */ - - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "MMIO write caching %sabled.\n", - pATI->OptionMMIOCache ? "en" : "dis"); - } - } - -#ifndef AVOID_CPIO - - if (pATI->Adapter >= ATI_ADAPTER_MACH32) - -#endif /* AVOID_CPIO */ - - { - if (pATI->Chip >= ATI_CHIP_264CT) - ATIReportMemory(pScreenInfo, pATI, - ATIMemoryTypeNames_264xT[pATI->MemoryType]); - else if (pATI->Chip == ATI_CHIP_88800CX) - ATIReportMemory(pScreenInfo, pATI, - ATIMemoryTypeNames_88800CX[pATI->MemoryType]); - else - ATIReportMemory(pScreenInfo, pATI, - ATIMemoryTypeNames_Mach[pATI->MemoryType]); - } - -#ifndef AVOID_CPIO - - else if (pATI->Adapter >= ATI_ADAPTER_V3) - { - ATIReportMemory(pScreenInfo, pATI, - (ATIGetExtReg(0xB7U) & 0x04U) ? "DRAM" : "VRAM"); - } - else - { - ATIReportMemory(pScreenInfo, pATI, "video memory"); - } - -#endif /* AVOID_CPIO */ - - /* - * Finish banking setup. This needs to be fixed to not assume the mode on - * entry is a VGA mode. XXX - */ - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - -#endif /* AVOID_CPIO */ - - { - pATIHW->crtc = pATI->NewHW.crtc; - -#ifndef AVOID_CPIO - - pATIHW->SetBank = (ATIBankProcPtr)NoopDDA; - pATI->BankInfo.BankSize = 0; /* No banking */ - -#endif /* AVOID_CPIO */ - - } - -#ifndef AVOID_CPIO - - else - { - pATIHW->crtc = ATI_CRTC_VGA; -#if 0 /* ___NOT_YET___ */ - if (pATI->ChipHasSUBSYS_CNTL) - { - } - else -#endif - if ((pATI->Chip >= ATI_CHIP_88800GXC) && - (pATI->LockData.crtc_gen_cntl & CRTC_EXT_DISP_EN)) - { - pATIHW->crtc = ATI_CRTC_MACH64; - } - - if (pATI->depth <= 4) - { - pATI->BankInfo.nBankDepth = 1; - pATI->NewHW.nPlane = 4; - } - else - { - pATI->BankInfo.nBankDepth = pATI->depth; - pATI->NewHW.nPlane = 1; - } - - if ((pATIHW->crtc != ATI_CRTC_VGA) || (GetReg(SEQX, 0x04U) & 0x08U)) - pATIHW->nPlane = 1; - else - pATIHW->nPlane = 4; - - pATIHW->nBank = ATIDivide(pATI->VideoRAM, - pATIHW->nPlane * pATI->BankInfo.BankSize, 10, 1); - pATI->NewHW.nBank = ATIDivide(pATI->VideoRAM, - pATI->NewHW.nPlane * pATI->BankInfo.BankSize, 10, 1); - - if (pATI->VGAAdapter == ATI_ADAPTER_VGA) - { - pATIHW->SetBank = pATI->NewHW.SetBank = - (ATIBankProcPtr)NoopDDA; - pATIHW->nBank = pATI->NewHW.nBank = 1; - } - else if (!pATI->UseSmallApertures) - { - pATIHW->SetBank = pATI->NewHW.SetBank; - } - else if ((pATIHW->crtc == ATI_CRTC_VGA) && - !(pATI->LockData.config_cntl & CFG_MEM_VGA_AP_EN)) - { - pATIHW->SetBank = (ATIBankProcPtr)NoopDDA; - pATIHW->nBank = 1; - } - else if (pATIHW->nPlane == 1) - { - pATIHW->SetBank = ATIMach64SetBankPacked; - } - else - { - pATIHW->SetBank = ATIMach64SetBankPlanar; - } - - if (((ApertureSize * pATI->depth) / pATI->BankInfo.nBankDepth) >= - (unsigned)(pScreenInfo->videoRam * 1024)) - pATI->BankInfo.BankSize = 0; /* No banking */ - } - -#endif /* AVOID_CPIO */ - - if (pATI->OptionShadowFB) - { - /* Until ShadowFB becomes a true screen wrapper, if it ever does... */ - -#ifndef AVOID_CPIO - - if (pATI->BankInfo.BankSize) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Cannot shadow a banked frame buffer.\n"); - pATI->OptionShadowFB = FALSE; - } - else if (pATI->depth < 8) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Cannot shadow a planar frame buffer.\n"); - pATI->OptionShadowFB = FALSE; - } - else - -#endif /* AVOID_CPIO */ - - if (pATI->OptionAccel) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Cannot shadow an accelerated frame buffer.\n"); - pATI->OptionShadowFB = FALSE; - } - else - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using shadow frame buffer.\n"); - } - } - - /* 264VT-B's and later have DSP registers */ - if ((pATI->Chip >= ATI_CHIP_264VTB) && - !ATIDSPPreInit(pScreenInfo->scrnIndex, pATI)) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - /* - * Determine minClock and maxClock. For adapters with supported - * programmable clock generators, start with an absolute maximum. - */ - if (pATI->ClockDescriptor.MaxN > 0) - { - Numerator = pATI->ClockDescriptor.MaxN * pATI->ReferenceNumerator; - Denominator = pATI->ClockDescriptor.MinM * pATI->ReferenceDenominator * - pATI->ClockDescriptor.PostDividers[0]; - - /* - * An integrated PLL behaves as though the reference frequency were - * doubled. It also does not appear to care about the colour depth. - */ - if (pATI->ProgrammableClock == ATI_CLOCK_INTERNAL) - Numerator <<= 1; - else if (pATI->depth > 8) - Denominator *= (pATI->bitsPerPixel / 8); - - ATIClockRange.maxClock = (Numerator / (Denominator * 1000)) * 1000; - - Numerator = pATI->ClockDescriptor.MinN * pATI->ReferenceNumerator; - Denominator = pATI->ClockDescriptor.MaxM * pATI->ReferenceDenominator * - pATI->ClockDescriptor.PostDividers[pATI->ClockDescriptor.NumD - 1]; - - if (pATI->ProgrammableClock == ATI_CLOCK_INTERNAL) - Numerator <<= 1; - - ATIClockRange.minClock = (Numerator / (Denominator * 1000)) * 1000; - - if (pATI->XCLKFeedbackDivider) - { - /* Possibly reduce maxClock due to memory bandwidth */ - Numerator = pATI->XCLKFeedbackDivider * 2 * - pATI->ReferenceNumerator; - Denominator = pATI->ClockDescriptor.MinM * - pATI->XCLKReferenceDivider * pATI->ReferenceDenominator; - -#ifndef AVOID_CPIO - - if (pATI->depth >= 8) - -#endif /* AVOID_CPIO */ - - { - Denominator *= pATI->bitsPerPixel / 4; - } - - i = (6 - 2) - pATI->XCLKPostDivider; - -#ifndef AVOID_CPIO - - if (pATI->NewHW.crtc == ATI_CRTC_VGA) - i--; - -#endif /* AVOID_CPIO */ - - i = (ATIDivide(Numerator, Denominator, i, -1) / 1000) * 1000; - if (i < ATIClockRange.maxClock) - ATIClockRange.maxClock = i; - } - } - - /* - * Assume an internal DAC can handle whatever frequency the internal PLL - * can produce (with the reference divider set by BIOS initialisation), but - * default maxClock to a lower chip-specific default. - */ - if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL) - { - int DacSpeed; - switch (pATI->bitsPerPixel) - { - case 15: - case 16: - DacSpeed = pGDev->dacSpeeds[DAC_BPP16]; - break; - - case 24: - DacSpeed = pGDev->dacSpeeds[DAC_BPP24]; - break; - - case 32: - DacSpeed = pGDev->dacSpeeds[DAC_BPP32]; - break; - - default: - DacSpeed = 0; - break; - } - if (!DacSpeed) - DacSpeed = pGDev->dacSpeeds[DAC_BPP8]; - if (DacSpeed < ATIClockRange.maxClock) - { - DefaultmaxClock = 135000; - - if (pATI->depth > 8) - DefaultmaxClock = 80000; - - if ((pATI->Chip >= ATI_CHIP_264VTB) && - (pATI->Chip != ATI_CHIP_Mach64)) - { - if ((pATI->Chip >= ATI_CHIP_264VT4) && - (pATI->Chip != ATI_CHIP_264LTPRO)) - DefaultmaxClock = 230000; - else if (pATI->Chip >= ATI_CHIP_264VT3) - DefaultmaxClock = 200000; - else - DefaultmaxClock = 170000; - } - if (DacSpeed > DefaultmaxClock) - ATIClockRange.maxClock = DacSpeed; - else if (DefaultmaxClock < ATIClockRange.maxClock) - ATIClockRange.maxClock = DefaultmaxClock; - } - } - else - { - switch(pATI->DAC) - { - case ATI_DAC_STG1700: - case ATI_DAC_STG1702: - case ATI_DAC_STG1703: - DefaultmaxClock = 110000; - break; - - case ATI_DAC_IBMRGB514: - pATI->maxClock = 220000; - -#ifndef AVOID_CPIO - - if (pATI->NewHW.crtc == ATI_CRTC_VGA) - { - DefaultmaxClock = 100000; - } - else - -#endif /* AVOID_CPIO */ - - { - DefaultmaxClock = 220000; - } - break; - - default: - -#ifndef AVOID_CPIO - - /* - * 80 MHz is too high in some cases. Limit 18800-x's to 40 - * MHz. Don't exceed the memory clock on VGA Wonder capables - * with less than 1 MB, if using a packed mode. - */ - if ((pATI->Chip == ATI_CHIP_18800) || - (pATI->Chip == ATI_CHIP_18800_1)) - { - DefaultmaxClock = 40000; - } - else if (pATI->CPIO_VGAWonder && - (pATI->VideoRAM < 1024) && - (pATI->depth >= 8)) - { - DefaultmaxClock = - (GetBits(BIOSByte(0x44U), 0x04U) * 5000) + 40000; - } - else - -#endif /* AVOID_CPIO */ - - { - DefaultmaxClock = 80000; - } - - break; - } - - if (DefaultmaxClock < ATIClockRange.maxClock) - ATIClockRange.maxClock = DefaultmaxClock; - } - - if (pATI->ClockDescriptor.MaxN <= 0) - { - ATIClockRange.maxClock = DefaultmaxClock; - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Maximum pixel clock: %.3f MHz.\n", - (double)ATIClockRange.maxClock / 1000.0); - } - - /* - * Determine available pixel clock frequencies. - */ - - ATIClockPreInit(pScreenInfo, pATI, pGDev, &ATIClockRange); - if (pATI->ProgrammableClock > ATI_CLOCK_FIXED) - Strategy = LOOKUP_BEST_REFRESH; - - /* - * Mode validation. - */ - -#ifdef AVOID_CPIO - - if (pATI->Chip >= ATI_CHIP_264CT) - { - minPitch = 8; - } - -#else /* AVOID_CPIO */ - - if ((pATI->depth >= 8) && (pATI->Chip >= ATI_CHIP_264CT)) - { - minPitch = 8; - } - else if (pATI->CPIO_VGAWonder && - (pATI->Chip <= ATI_CHIP_18800_1) && - (pATI->VideoRAM == 256) && - (pATI->depth >= 8)) - { - minPitch = 32; /* Very strange, but true */ - maxPitch = 0x3FU; - } - -#endif /* AVOID_CPIO */ - - else - { - minPitch = 16; - } - - pATI->pitchInc = minPitch; - -#ifndef AVOID_CPIO - - if (pATI->depth >= 8) - -#endif /* AVOID_CPIO */ - - { - pATI->pitchInc *= pATI->bitsPerPixel; - } - - switch (pATI->NewHW.crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - /* - * IBM's VGA doesn't allow for interlaced modes. - */ - if (pATI->Adapter <= ATI_ADAPTER_VGA) - ATIClockRange.interlaceAllowed = FALSE; - - pScreenInfo->maxHValue = (0xFFU + 1) << 3; /* max HTotal */ - - /* - * The maximum VTotal value set here applies to all modes, - * including interlaced, doublescanned or multiscanned modes. - * Finer-grained checks are done in ATIValidateMode(). - */ - pScreenInfo->maxVValue = 0x03FFU + 1; - if (pATI->Adapter > ATI_ADAPTER_VGA) - { - pScreenInfo->maxVValue <<= 1; - if (ATIClockRange.interlaceAllowed && - (pATI->Chip < ATI_CHIP_264CT)) - pScreenInfo->maxVValue <<= 1; - } - - /* - * 18800-x and 28800-x do not support interlaced modes when the - * scanline pitch is 2048 pixels or more. For 18800-x's with 256 - * kB of video memory, the limit for 8bpp is 1024. - */ - if (ATIClockRange.interlaceAllowed && - (pATI->Chip <= ATI_CHIP_28800_6)) - { - if (minPitch == 32) - pATI->MaximumInterlacedPitch = 0x1FU * 32; - else - pATI->MaximumInterlacedPitch = 0x7FU * minPitch; - } - - Strategy |= LOOKUP_CLKDIV2; - - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - pScreenInfo->maxHValue = (MaxBits(CRTC_H_TOTAL) + 1) << 3; - - if (pATI->Chip < ATI_CHIP_264VT) - { - /* - * ATI finally fixed accelerated doublescanning in the 264VT - * and later. On 88800's, the bit is documented to exist, but - * only doubles the vertical timings. On the 264CT and 264ET, - * the bit is ignored. - */ - ATIClockRange.doubleScanAllowed = FALSE; - - /* CRTC_H_TOTAL is one bit narrower */ - pScreenInfo->maxHValue >>= 1; - } - - pScreenInfo->maxVValue = MaxBits(CRTC_V_TOTAL) + 1; - - maxPitch = MaxBits(CRTC_PITCH); - - break; - - default: - break; - } - - maxPitch *= minPitch; - - if (pATI->OptionAccel) - { - /* - * Set engine restrictions on coordinate space. Use maxPitch for the - * horizontal and maxHeight for the vertical. - */ - if (maxPitch > (ATIMach64MaxX / pATI->XModifier)) - maxPitch = ATIMach64MaxX / pATI->XModifier; - maxHeight = ATIMach64MaxY; - - /* - * For SGRAM & WRAM adapters, the display engine limits the pitch to - * multiples of 64 bytes. - */ - if ((pATI->Chip >= ATI_CHIP_264CT) && - ((pATI->Chip >= ATI_CHIP_264VTB) || - (pATI->MemoryType >= MEM_264_SGRAM))) - pATI->pitchInc = pATI->XModifier * (64 * 8); - } - - if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0) && - (ModeType == M_T_BUILTIN)) - { - /* - * Given LCD modes are more tightly controlled than CRT modes, allow - * the user the option of not specifying a panel's horizontal sync - * and/or vertical refresh tolerances. - */ - Strategy |= LOOKUP_OPTIONAL_TOLERANCES; - - /* - * Add a mode to the end of the monitor's list for the panel's native - * resolution. - */ - pMode = (DisplayModePtr)xnfcalloc(1, SizeOf(DisplayModeRec)); - pMode->name = "Native panel mode"; - pMode->type = M_T_BUILTIN; - pMode->Clock = pATI->LCDClock; - pMode->HDisplay = pATI->LCDHorizontal; - pMode->VDisplay = pATI->LCDVertical; - - /* - * These timings are bogus, but enough to survive sync tolerance - * checks. - */ - pMode->HSyncStart = pMode->HDisplay; - pMode->HSyncEnd = pMode->HSyncStart + minPitch; - pMode->HTotal = pMode->HSyncEnd + minPitch; - pMode->VSyncStart = pMode->VDisplay; - pMode->VSyncEnd = pMode->VSyncStart + 1; - pMode->VTotal = pMode->VSyncEnd + 1; - - pMode->CrtcHDisplay = pMode->HDisplay; - pMode->CrtcHBlankStart = pMode->HDisplay; - pMode->CrtcHSyncStart = pMode->HSyncStart; - pMode->CrtcHSyncEnd = pMode->HSyncEnd; - pMode->CrtcHBlankEnd = pMode->HTotal; - pMode->CrtcHTotal = pMode->HTotal; - - pMode->CrtcVDisplay = pMode->VDisplay; - pMode->CrtcVBlankStart = pMode->VDisplay; - pMode->CrtcVSyncStart = pMode->VSyncStart; - pMode->CrtcVSyncEnd = pMode->VSyncEnd; - pMode->CrtcVBlankEnd = pMode->VTotal; - pMode->CrtcVTotal = pMode->VTotal; - - if (!pScreenInfo->monitor->Modes) - { - pScreenInfo->monitor->Modes = pMode; - } - else - { - pScreenInfo->monitor->Last->next = pMode; - pMode->prev = pScreenInfo->monitor->Last; - } - - pScreenInfo->monitor->Last = pMode; - - /* - * Defeat Xconfigurator brain damage. Ignore all HorizSync and - * VertRefresh specifications. For now, this does not take - * SYNC_TOLERANCE into account. - */ - if (pScreenInfo->monitor->nHsync > 0) - { - double hsync = (double)pMode->Clock / - (pATI->LCDHorizontal + pATI->LCDHBlankWidth); - - for (i = 0; ; i++) - { - if (i >= pScreenInfo->monitor->nHsync) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Conflicting XF86Config HorizSync specification(s)" - " ignored.\n"); - break; - } - - if ((hsync >= pScreenInfo->monitor->hsync[i].lo) && - (hsync <= pScreenInfo->monitor->hsync[i].hi)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Extraneous XF86Config HorizSync specification(s)" - " ignored.\n"); - break; - } - } - - pScreenInfo->monitor->nHsync = 0; - } - - if (pScreenInfo->monitor->nVrefresh > 0) - { - double vrefresh = ((double)pMode->Clock * 1000.0) / - ((pATI->LCDHorizontal + pATI->LCDHBlankWidth) * - (pATI->LCDVertical + pATI->LCDVBlankWidth)); - - for (i = 0; ; i++) - { - if (i >= pScreenInfo->monitor->nVrefresh) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Conflicting XF86Config VertRefresh specification(s)" - " ignored.\n"); - break; - } - - if ((vrefresh >= pScreenInfo->monitor->vrefresh[i].lo) && - (vrefresh <= pScreenInfo->monitor->vrefresh[i].hi)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Extraneous XF86Config VertRefresh specification(s)" - " ignored.\n"); - break; - } - } - - pScreenInfo->monitor->nVrefresh = 0; - } - } - - i = xf86ValidateModes(pScreenInfo, - pScreenInfo->monitor->Modes, pScreenInfo->display->modes, - &ATIClockRange, NULL, minPitch, maxPitch, - pATI->pitchInc, 0, maxHeight, - pScreenInfo->display->virtualX, pScreenInfo->display->virtualY, - ApertureSize, Strategy); - if (i <= 0) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - /* Remove invalid modes */ - xf86PruneDriverModes(pScreenInfo); - - /* Set current mode to the first in the list */ - pScreenInfo->currentMode = pScreenInfo->modes; - - /* Print mode list */ - xf86PrintModes(pScreenInfo); - - /* Set display resolution */ - xf86SetDpi(pScreenInfo, 0, 0); - - /* Load required modules */ - if (!ATILoadModules(pScreenInfo, pATI)) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - pATI->displayWidth = pScreenInfo->displayWidth; - - /* Initialise for panning */ - ATIAdjustPreInit(pATI); - - /* - * Warn about modes that are too small, or not aligned, to scroll to the - * bottom right corner of the virtual screen. - */ - MinX = pScreenInfo->virtualX - pATI->AdjustMaxX; - MinY = pScreenInfo->virtualY - pATI->AdjustMaxY; - - pMode = pScreenInfo->modes; - do - { - if ((pMode->VDisplay <= MinY) && - ((pMode->VDisplay < MinY) || (pMode->HDisplay < MinX))) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Mode \"%s\" too small to scroll to bottom right corner of" - " virtual resolution.\n", pMode->name); - else if ((pMode->HDisplay & ~pATI->AdjustMask) / pScreenInfo->xInc) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Mode \"%s\" cannot scroll to bottom right corner of virtual" - " resolution.\n Horizontal dimension not a multiple of %d.\n", - pMode->name, ~pATI->AdjustMask + 1); - } while ((pMode = pMode->next) != pScreenInfo->modes); - - /* Initialise XVideo extension support */ - ATIXVPreInit(pATI); - - /* Initialise CRTC code */ - ATIModePreInit(pScreenInfo, pATI, &pATI->NewHW); - - /* Set up for I2C */ - ATII2CPreInit(pScreenInfo, pATI); - - if (!pScreenInfo->chipset || !*pScreenInfo->chipset) - pScreenInfo->chipset = (char *)ATIChipsetNames[0]; - - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - - return TRUE; -} diff --git a/src/atipreinit.h b/src/atipreinit.h deleted file mode 100644 index 5404c2c2..00000000 --- a/src/atipreinit.h +++ /dev/null @@ -1,33 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atipreinit.h,v 1.6 2003/01/01 19:16:33 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIPREINIT_H___ -#define ___ATIPREINIT_H___ 1 - -#include "atiproto.h" - -#include "xf86str.h" - -extern Bool ATIPreInit FunctionPrototype((ScrnInfoPtr, int)); - -#endif /* ___ATIPREINIT_H___ */ diff --git a/src/atiprint.c b/src/atiprint.c deleted file mode 100644 index 6b7f20d8..00000000 --- a/src/atiprint.c +++ /dev/null @@ -1,830 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiprint.c,v 1.26 2003/04/23 21:51:30 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atichip.h" -#include "atidac.h" -#include "atimach64io.h" -#include "atiprint.h" -#include "atiwonderio.h" - -/* - * ATIPrintBIOS -- - * - * Display various parts of the BIOS when the server is invoked with -verbose. - */ -void -ATIPrintBIOS -( - const CARD8 *BIOS, - const unsigned int Length /* A multiple of 512 */ -) -{ - unsigned char *Char = NULL; - unsigned int Index; - unsigned char Printable[17]; - - if (xf86GetVerbosity() <= 4) - return; - - (void)memset(Printable, 0, SizeOf(Printable)); - - xf86ErrorFVerb(5, "\n BIOS image:"); - - for (Index = 0; Index < Length; Index++) - { - if (!(Index & (4U - 1U))) - { - if (!(Index & (16U - 1U))) - { - if (Printable[0]) - xf86ErrorFVerb(5, " |%s|", Printable); - Char = Printable; - xf86ErrorFVerb(5, "\n 0x%08X: ", Index); - } - xf86ErrorFVerb(5, " "); - } - xf86ErrorFVerb(5, "%02X", BIOS[Index]); - if (isprint(BIOS[Index])) - *Char++ = BIOS[Index]; - else - *Char++ = '.'; - } - - xf86ErrorFVerb(5, " |%s|\n", Printable); -} - -#ifndef AVOID_CPIO - -/* - * ATIPrintIndexedRegisters -- - * - * Display a set of indexed byte-size registers when the server is invoked with - * -verbose. - */ -static void -ATIPrintIndexedRegisters -( - const IOADDRESS Port, - const CARD8 StartIndex, - const CARD8 EndIndex, - const char *Name, - const IOADDRESS GenS1 -) -{ - int Index; - - xf86ErrorFVerb(4, "\n %s register values:", Name); - for (Index = StartIndex; Index < EndIndex; Index++) - { - if (!(Index & (4U - 1U))) - { - if (!(Index & (16U - 1U))) - xf86ErrorFVerb(4, "\n 0x%02X: ", Index); - xf86ErrorFVerb(4, " "); - } - if (Port == ATTRX) - (void)inb(GenS1); /* Reset flip-flop */ - xf86ErrorFVerb(4, "%02X", GetReg(Port, Index)); - } - - if (Port == ATTRX) - { - (void)inb(GenS1); /* Reset flip-flop */ - outb(ATTRX, 0x20U); /* Turn on PAS bit */ - } - - xf86ErrorFVerb(4, "\n"); -} - -#endif /* AVOID_CPIO */ - -/* - * ATIMach64PrintRegisters -- - * - * Display a Mach64's main register bank when the server is invoked with - * -verbose. - */ -static void -ATIMach64PrintRegisters -( - ATIPtr pATI, - CARD8 *crtc, - const char *Description -) -{ - CARD32 IOValue; - CARD8 dac_read, dac_mask, dac_data, dac_write; - int Index, Limit; - -#ifndef AVOID_CPIO - - int Step; - -#endif /* AVOID_CPIO */ - - xf86ErrorFVerb(4, "\n Mach64 %s register values:", Description); - -#ifdef AVOID_CPIO - - if (pATI->pBlock[1]) - Limit = DWORD_SELECT; - else - Limit = MM_IO_SELECT; - - for (Index = 0; Index <= Limit; Index += UnitOf(MM_IO_SELECT)) - { - if (!(Index & SetBits(3, MM_IO_SELECT))) - xf86ErrorFVerb(4, "\n 0x%04X: ", Index); - if (Index == (DAC_REGS & DWORD_SELECT)) - { - dac_read = in8(DAC_REGS + 3); - DACDelay; - dac_mask = in8(DAC_REGS + 2); - DACDelay; - dac_data = in8(DAC_REGS + 1); - DACDelay; - dac_write = in8(DAC_REGS + 0); - DACDelay; - - xf86ErrorFVerb(4, " %02X%02X%02X%02X", - dac_read, dac_mask, dac_data, dac_write); - - out8(DAC_REGS + 2, dac_mask); - DACDelay; - out8(DAC_REGS + 3, dac_read); - DACDelay; - } - else - { - IOValue = inm(Index); - - if ((Index == (CRTC_GEN_CNTL & DWORD_SELECT)) && - (IOValue & CRTC_EXT_DISP_EN)) - *crtc = ATI_CRTC_MACH64; - - xf86ErrorFVerb(4, " %08X", IOValue); - } - } - -#else /* AVOID_CPIO */ - - Limit = ATIIOPort(IOPortTag(0x1FU, 0x3FU)); - Step = ATIIOPort(IOPortTag(0x01U, 0x01U)) - pATI->CPIOBase; - for (Index = pATI->CPIOBase; Index <= Limit; Index += Step) - { - if (!(((Index - pATI->CPIOBase) / Step) & 0x03U)) - xf86ErrorFVerb(4, "\n 0x%04X: ", Index); - if (Index == (int)ATIIOPort(DAC_REGS)) - { - dac_read = in8(DAC_REGS + 3); - DACDelay; - dac_mask = in8(DAC_REGS + 2); - DACDelay; - dac_data = in8(DAC_REGS + 1); - DACDelay; - dac_write = in8(DAC_REGS + 0); - DACDelay; - - xf86ErrorFVerb(4, " %02X%02X%02X%02X", - dac_read, dac_mask, dac_data, dac_write); - - out8(DAC_REGS + 2, dac_mask); - DACDelay; - out8(DAC_REGS + 3, dac_read); - DACDelay; - } - else - { - IOValue = inl(Index); - - if ((Index == (int)ATIIOPort(CRTC_GEN_CNTL)) && - (IOValue & CRTC_EXT_DISP_EN)) - *crtc = ATI_CRTC_MACH64; - - xf86ErrorFVerb(4, " %08X", IOValue); - } - } - -#endif /* AVOID_CPIO */ - - xf86ErrorFVerb(4, "\n"); -} - -/* - * ATIMach64PrintPLLRegisters -- - * - * Display an integrated Mach64's PLL registers when the server is invoked with - * -verbose. - */ -static void -ATIMach64PrintPLLRegisters -( - ATIPtr pATI -) -{ - int Index, Limit; - CARD8 PLLReg[MaxBits(PLL_ADDR) + 1]; - - for (Limit = 0; Limit < SizeOf(PLLReg); Limit++) - PLLReg[Limit] = ATIMach64GetPLLReg(Limit); - - /* Determine how many PLL registers there really are */ - while ((Limit = Limit >> 1)) - for (Index = 0; Index < Limit; Index++) - if (PLLReg[Index] != PLLReg[Index + Limit]) - goto FoundLimit; -FoundLimit: - Limit <<= 1; - - xf86ErrorFVerb(4, "\n Mach64 PLL register values:"); - for (Index = 0; Index < Limit; Index++) - { - if (!(Index & 3)) - { - if (!(Index & 15)) - xf86ErrorFVerb(4, "\n 0x%02X: ", Index); - xf86ErrorFVerb(4, " "); - } - xf86ErrorFVerb(4, "%02X", PLLReg[Index]); - } - - xf86ErrorFVerb(4, "\n"); -} - -/* - * ATIRGB514PrintRegisters -- - * - * Display IBM RGB 514 registers when the server is invoked with -verbose. - */ -static void -ATIRGB514PrintRegisters -( - ATIPtr pATI -) -{ - CARD32 crtc_gen_cntl, dac_cntl; - CARD8 index_lo, index_hi, index_ctl; - int Index; - - /* Temporarily switch to Mach64 CRTC */ - crtc_gen_cntl = inr(CRTC_GEN_CNTL); - if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN)) - outr(CRTC_GEN_CNTL, crtc_gen_cntl | CRTC_EXT_DISP_EN); - - /* Temporarily switch to IBM RGB 514 registers */ - dac_cntl = inr(DAC_CNTL); - outr(DAC_CNTL, (dac_cntl & ~DAC_EXT_SEL_RS3) | DAC_EXT_SEL_RS2); - - index_lo = in8(M64_DAC_WRITE); - index_hi = in8(M64_DAC_DATA); - index_ctl = in8(M64_DAC_READ); - - out8(M64_DAC_WRITE, 0x00U); - out8(M64_DAC_DATA, 0x00U); - out8(M64_DAC_READ, 0x01U); /* Auto-increment */ - - xf86ErrorFVerb(4, "\n IBM RGB 514 registers:"); - for (Index = 0; Index < 0x0800; Index++) - { - if (!(Index & 3)) - { - if (!(Index & 15)) - { - xf86ErrorFVerb(4, "\n 0x%04X: ", Index); - - /* Need to rewrite index every so often... */ - if ((Index == 0x0100) || (Index == 0x0500)) - { - out8(M64_DAC_WRITE, 0x00U); - out8(M64_DAC_DATA, Index >> 8); - } - } - - xf86ErrorFVerb(4, " "); - } - - xf86ErrorFVerb(4, "%02X", in8(M64_DAC_MASK)); - } - - /* Restore registers */ - out8(M64_DAC_WRITE, index_lo); - out8(M64_DAC_DATA, index_hi); - out8(M64_DAC_READ, index_ctl); - outr(DAC_CNTL, dac_cntl); - if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN)) - outr(CRTC_GEN_CNTL, crtc_gen_cntl); - - xf86ErrorFVerb(4, "\n"); -} - -/* - * ATIPrintRegisters -- - * - * Display various registers when the server is invoked with -verbose. - */ -void -ATIPrintRegisters -( - ATIPtr pATI -) -{ - pciVideoPtr pVideo; - pciConfigPtr pPCI; - int Index; - CARD32 lcd_index, tv_out_index, lcd_gen_ctrl; - CARD8 dac_read, dac_mask, dac_write; - CARD8 crtc; - -#ifndef AVOID_CPIO - - CARD8 genmo, seq1 = 0; - - crtc = ATI_CRTC_VGA; - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - xf86ErrorFVerb(4, "\n Miscellaneous output register value: 0x%02X.\n", - genmo = inb(R_GENMO)); - - if (genmo & 0x01U) - { - if (pATI->Chip == ATI_CHIP_264LT) - { - lcd_gen_ctrl = inr(LCD_GEN_CTRL); - - outr(LCD_GEN_CTRL, lcd_gen_ctrl & ~SHADOW_RW_EN); - ATIPrintIndexedRegisters(CRTX(ColourIOBase), 0, 64, - "Non-shadow colour CRT controller", 0); - - outr(LCD_GEN_CTRL, lcd_gen_ctrl | SHADOW_RW_EN); - ATIPrintIndexedRegisters(CRTX(ColourIOBase), 0, 64, - "Shadow colour CRT controller", 0); - - outr(LCD_GEN_CTRL, lcd_gen_ctrl); - } - else if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) - { - lcd_index = inr(LCD_INDEX); - lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - - ATIMach64PutLCDReg(LCD_GEN_CNTL, - lcd_gen_ctrl & ~(CRTC_RW_SELECT | SHADOW_RW_EN)); - ATIPrintIndexedRegisters(CRTX(ColourIOBase), 0, 64, - "Non-shadow colour CRT controller", 0); - - ATIMach64PutLCDReg(LCD_GEN_CNTL, - (lcd_gen_ctrl & ~CRTC_RW_SELECT) | SHADOW_RW_EN); - ATIPrintIndexedRegisters(CRTX(ColourIOBase), 0, 64, - "Shadow colour CRT controller", 0); - - ATIMach64PutLCDReg(LCD_GEN_CNTL, lcd_gen_ctrl); - outr(LCD_INDEX, lcd_index); - } - else - { - ATIPrintIndexedRegisters(CRTX(ColourIOBase), 0, 64, - "Colour CRT controller", 0); - } - - ATIPrintIndexedRegisters(ATTRX, 0, 32, "Attribute controller", - GENS1(ColourIOBase)); - } - else - { - if (pATI->Chip == ATI_CHIP_264LT) - { - lcd_gen_ctrl = inr(LCD_GEN_CTRL); - - outr(LCD_GEN_CTRL, lcd_gen_ctrl & ~SHADOW_RW_EN); - ATIPrintIndexedRegisters(CRTX(MonochromeIOBase), 0, 64, - "Non-shadow monochrome CRT controller", 0); - - outr(LCD_GEN_CTRL, lcd_gen_ctrl | SHADOW_RW_EN); - ATIPrintIndexedRegisters(CRTX(MonochromeIOBase), 0, 64, - "Shadow monochrome CRT controller", 0); - - outr(LCD_GEN_CTRL, lcd_gen_ctrl); - } - else if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) - { - lcd_index = inr(LCD_INDEX); - lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - - ATIMach64PutLCDReg(LCD_GEN_CNTL, - lcd_gen_ctrl & ~(CRTC_RW_SELECT | SHADOW_RW_EN)); - ATIPrintIndexedRegisters(CRTX(MonochromeIOBase), 0, 64, - "Non-shadow monochrome CRT controller", 0); - - ATIMach64PutLCDReg(LCD_GEN_CNTL, - (lcd_gen_ctrl & ~CRTC_RW_SELECT) | SHADOW_RW_EN); - ATIPrintIndexedRegisters(CRTX(MonochromeIOBase), 0, 64, - "Shadow monochrome CRT controller", 0); - - ATIMach64PutLCDReg(LCD_GEN_CNTL, lcd_gen_ctrl); - outr(LCD_INDEX, lcd_index); - } - else - { - ATIPrintIndexedRegisters(CRTX(MonochromeIOBase), 0, 64, - "Monochrome CRT controller", 0); - } - - ATIPrintIndexedRegisters(ATTRX, 0, 32, "Attribute controller", - GENS1(MonochromeIOBase)); - } - - ATIPrintIndexedRegisters(GRAX, 0, 16, "Graphics controller", 0); - ATIPrintIndexedRegisters(SEQX, 0, 8, "Sequencer", 0); - - if (pATI->CPIO_VGAWonder) - ATIPrintIndexedRegisters(pATI->CPIO_VGAWonder, - xf86ServerIsOnlyProbing() ? 0x80U : pATI->VGAOffset, 0xC0U, - "ATI extended VGA", 0); - } - - if (pATI->ChipHasSUBSYS_CNTL) - { - xf86ErrorFVerb(4, "\n 8514/A register values:"); - for (Index = 0x02E8U; Index <= 0x0FEE8; Index += 0x0400U) - { - if (!((Index - 0x02E8U) & 0x0C00U)) - xf86ErrorFVerb(4, "\n 0x%04X: ", Index); - xf86ErrorFVerb(4, " %04X", inw(Index)); - } - - if (pATI->Adapter >= ATI_ADAPTER_MACH8) - { - xf86ErrorFVerb(4, "\n\n Mach8/Mach32 register values:"); - for (Index = 0x02EEU; Index <= 0x0FEEE; Index += 0x0400U) - { - if (!((Index - 0x02EEU) & 0x0C00U)) - xf86ErrorFVerb(4, "\n 0x%04X: ", Index); - xf86ErrorFVerb(4, " %04X", inw(Index)); - } - } - - xf86ErrorFVerb(4, "\n"); - } - else - -#endif /* AVOID_CPIO */ - - if (pATI->Chip == ATI_CHIP_264LT) - { - lcd_gen_ctrl = inr(LCD_GEN_CTRL); - - outr(LCD_GEN_CTRL, lcd_gen_ctrl & ~SHADOW_RW_EN); - ATIMach64PrintRegisters(pATI, &crtc, "non-shadow"); - - outr(LCD_GEN_CTRL, lcd_gen_ctrl | SHADOW_RW_EN); - ATIMach64PrintRegisters(pATI, &crtc, "shadow"); - - outr(LCD_GEN_CTRL, lcd_gen_ctrl); - - ATIMach64PrintPLLRegisters(pATI); - } - else if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) - { - lcd_index = inr(LCD_INDEX); - lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - - ATIMach64PutLCDReg(LCD_GEN_CNTL, - lcd_gen_ctrl & ~(CRTC_RW_SELECT | SHADOW_RW_EN)); - ATIMach64PrintRegisters(pATI, &crtc, "non-shadow"); - - ATIMach64PutLCDReg(LCD_GEN_CNTL, - (lcd_gen_ctrl & ~CRTC_RW_SELECT) | SHADOW_RW_EN); - ATIMach64PrintRegisters(pATI, &crtc, "shadow"); - - if (pATI->Chip != ATI_CHIP_264XL) - { - ATIMach64PutLCDReg(LCD_GEN_CNTL, lcd_gen_ctrl | CRTC_RW_SELECT); - ATIMach64PrintRegisters(pATI, &crtc, "secondary"); - } - - ATIMach64PutLCDReg(LCD_GEN_CNTL, lcd_gen_ctrl); - - ATIMach64PrintPLLRegisters(pATI); - - xf86ErrorFVerb(4, "\n LCD register values:"); - for (Index = 0; Index < 64; Index++) - { - if (!(Index & 3)) - xf86ErrorFVerb(4, "\n 0x%02X: ", Index); - xf86ErrorFVerb(4, " %08X", ATIMach64GetLCDReg(Index)); - } - - outr(LCD_INDEX, lcd_index); - - tv_out_index = inr(TV_OUT_INDEX); - - xf86ErrorFVerb(4, "\n\n TV_OUT register values:"); - for (Index = 0; Index < 256; Index++) - { - if (!(Index & 3)) - xf86ErrorFVerb(4, "\n 0x%02X: ", Index); - xf86ErrorFVerb(4, " %08X", ATIMach64GetTVReg(Index)); - } - - outr(TV_OUT_INDEX, tv_out_index); - - xf86ErrorFVerb(4, "\n"); - } - else - -#ifndef AVOID_CPIO - - if (pATI->Chip >= ATI_CHIP_88800GXC) - -#endif /* AVOID_CPIO */ - - { - -#ifdef AVOID_CPIO - - ATIMach64PrintRegisters(pATI, &crtc, "MMIO"); - -#else /* AVOID_CPIO */ - - ATIMach64PrintRegisters(pATI, &crtc, - (pATI->CPIODecoding == SPARSE_IO) ? "sparse" : "block"); - -#endif /* AVOID_CPIO */ - - if (pATI->Chip >= ATI_CHIP_264CT) - ATIMach64PrintPLLRegisters(pATI); - - if (pATI->DAC == ATI_DAC_IBMRGB514) - ATIRGB514PrintRegisters(pATI); - } - -#ifdef AVOID_CPIO - - dac_read = in8(M64_DAC_READ); - DACDelay; - dac_write = in8(M64_DAC_WRITE); - DACDelay; - dac_mask = in8(M64_DAC_MASK); - DACDelay; - - xf86ErrorFVerb(4, "\n" - " DAC read index: 0x%02X\n" - " DAC write index: 0x%02X\n" - " DAC mask: 0x%02X\n\n" - " DAC colour lookup table:", - dac_read, dac_write, dac_mask); - - out8(M64_DAC_MASK, 0xFFU); - DACDelay; - out8(M64_DAC_READ, 0x00U); - DACDelay; - - for (Index = 0; Index < 256; Index++) - { - if (!(Index & 3)) - xf86ErrorFVerb(4, "\n 0x%02X:", Index); - xf86ErrorFVerb(4, " %02X", in8(M64_DAC_DATA)); - DACDelay; - xf86ErrorFVerb(4, " %02X", in8(M64_DAC_DATA)); - DACDelay; - xf86ErrorFVerb(4, " %02X", in8(M64_DAC_DATA)); - DACDelay; - } - - out8(M64_DAC_MASK, dac_mask); - DACDelay; - out8(M64_DAC_READ, dac_read); - DACDelay; - -#else /* AVOID_CPIO */ - - ATISetDACIOPorts(pATI, crtc); - - /* Temporarily turn off CLKDIV2 while reading DAC's LUT */ - if (pATI->Adapter == ATI_ADAPTER_NONISA) - { - seq1 = GetReg(SEQX, 0x01U); - if (seq1 & 0x08U) - PutReg(SEQX, 0x01U, seq1 & ~0x08U); - } - - dac_read = inb(pATI->CPIO_DAC_READ); - DACDelay; - dac_write = inb(pATI->CPIO_DAC_WRITE); - DACDelay; - dac_mask = inb(pATI->CPIO_DAC_MASK); - DACDelay; - - xf86ErrorFVerb(4, "\n" - " DAC read index: 0x%02X\n" - " DAC write index: 0x%02X\n" - " DAC mask: 0x%02X\n\n" - " DAC colour lookup table:", - dac_read, dac_write, dac_mask); - - outb(pATI->CPIO_DAC_MASK, 0xFFU); - DACDelay; - outb(pATI->CPIO_DAC_READ, 0x00U); - DACDelay; - - for (Index = 0; Index < 256; Index++) - { - if (!(Index & 3)) - xf86ErrorFVerb(4, "\n 0x%02X:", Index); - xf86ErrorFVerb(4, " %02X", inb(pATI->CPIO_DAC_DATA)); - DACDelay; - xf86ErrorFVerb(4, " %02X", inb(pATI->CPIO_DAC_DATA)); - DACDelay; - xf86ErrorFVerb(4, " %02X", inb(pATI->CPIO_DAC_DATA)); - DACDelay; - } - - outb(pATI->CPIO_DAC_MASK, dac_mask); - DACDelay; - outb(pATI->CPIO_DAC_READ, dac_read); - DACDelay; - - if ((pATI->Adapter == ATI_ADAPTER_NONISA) && (seq1 & 0x08U)) - PutReg(SEQX, 0x01U, seq1); - -#endif /* AVOID_CPIO */ - - if ((pVideo = pATI->PCIInfo)) - { - pPCI = pVideo->thisCard; - xf86ErrorFVerb(4, "\n\n PCI configuration register values:"); - for (Index = 0; Index < 256; Index+= 4) - { - if (!(Index & 15)) - xf86ErrorFVerb(4, "\n 0x%02X: ", Index); - xf86ErrorFVerb(4, " 0x%08X", pciReadLong(pPCI->tag, Index)); - } - } - - xf86ErrorFVerb(4, "\n"); - -#ifndef AVOID_CPIO - - if (pATI->pBank) - xf86ErrorFVerb(4, "\n Banked aperture at 0x%0lX.", - pATI->pBank); - else - xf86ErrorFVerb(4, "\n No banked aperture."); - - if (pATI->pMemory == pATI->pBank) - { - xf86ErrorFVerb(4, "\n No linear aperture.\n"); - } - else - -#else /* AVOID_CPIO */ - - if (pATI->pMemory) - -#endif /* AVOID_CPIO */ - - { - xf86ErrorFVerb(4, "\n Linear aperture at 0x%0lX.\n", pATI->pMemory); - } - - if (pATI->pBlock[0]) - { - xf86ErrorFVerb(4, " Block 0 aperture at 0x%0lX.\n", pATI->pBlock[0]); - if (inr(CONFIG_CHIP_ID) == pATI->config_chip_id) - xf86ErrorFVerb(4, " MMIO registers are correctly mapped.\n"); - else - xf86ErrorFVerb(4, " MMIO mapping is in error!\n"); - if (pATI->pBlock[1]) - xf86ErrorFVerb(4, " Block 1 aperture at 0x%0lX.\n", - pATI->pBlock[1]); - } - else - { - xf86ErrorFVerb(4, " No MMIO aperture.\n"); - } - - if (pATI->pCursorImage) - xf86ErrorFVerb(4, " Hardware cursor image aperture at 0x%0lX.\n", - pATI->pCursorImage); - else - xf86ErrorFVerb(4, " No hardware cursor image aperture.\n"); - - xf86ErrorFVerb(4, "\n"); -} - -/* - * A table to associate mode attributes with character strings. - */ -static const SymTabRec ModeAttributeNames[] = -{ - {V_PHSYNC, "+hsync"}, - {V_NHSYNC, "-hsync"}, - {V_PVSYNC, "+vsync"}, - {V_NVSYNC, "-vsync"}, - {V_PCSYNC, "+csync"}, - {V_NCSYNC, "-csync"}, - {V_INTERLACE, "interlace"}, - {V_DBLSCAN, "doublescan"}, - {V_CSYNC, "composite"}, - {V_DBLCLK, "dblclk"}, - {V_CLKDIV2, "clkdiv2"}, - {0, NULL} -}; - -/* - * ATIPrintMode -- - * - * This function displays a mode's timing information. - */ -void -ATIPrintMode -( - DisplayModePtr pMode -) -{ - const SymTabRec *pSymbol = ModeAttributeNames; - int flags = pMode->Flags; - double mClock, hSync, vRefresh; - - mClock = (double)pMode->SynthClock; - if (pMode->HSync > 0.0) - hSync = pMode->HSync; - else - hSync = mClock / pMode->HTotal; - if (pMode->VRefresh > 0.0) - { - vRefresh = pMode->VRefresh; - } - else - { - vRefresh = (hSync * 1000.0) / pMode->VTotal; - if (flags & V_INTERLACE) - vRefresh *= 2.0; - if (flags & V_DBLSCAN) - vRefresh /= 2.0; - if (pMode->VScan > 1) - vRefresh /= pMode->VScan; - } - - xf86ErrorFVerb(4, " Dot clock: %7.3f MHz\n", mClock / 1000.0); - xf86ErrorFVerb(4, " Horizontal sync: %7.3f kHz\n", hSync); - xf86ErrorFVerb(4, " Vertical refresh: %7.3f Hz (%s)\n", vRefresh, - (flags & V_INTERLACE) ? "I" : "NI"); - if ((pMode->ClockIndex >= 0) && (pMode->ClockIndex < MAXCLOCKS)) - xf86ErrorFVerb(4, " Clock index: %d\n", pMode->ClockIndex); - xf86ErrorFVerb(4, " Horizontal timings: %4d %4d %4d %4d\n" - " Vertical timings: %4d %4d %4d %4d\n", - pMode->HDisplay, pMode->HSyncStart, pMode->HSyncEnd, pMode->HTotal, - pMode->VDisplay, pMode->VSyncStart, pMode->VSyncEnd, pMode->VTotal); - - if (flags & V_HSKEW) - { - flags &= ~V_HSKEW; - xf86ErrorFVerb(4, " Horizontal skew: %4d\n", pMode->HSkew); - } - - if (pMode->VScan >= 1) - xf86ErrorFVerb(4, " Vertical scan: %4d\n", pMode->VScan); - - xf86ErrorFVerb(4, " Flags: "); - for (; pSymbol->token; pSymbol++) - { - if (flags & pSymbol->token) - { - xf86ErrorFVerb(4, " %s", pSymbol->name); - flags &= ~pSymbol->token; - if (!flags) - break; - } - } - - xf86ErrorFVerb(4, "\n"); -} diff --git a/src/atiprint.h b/src/atiprint.h deleted file mode 100644 index d44cbdf8..00000000 --- a/src/atiprint.h +++ /dev/null @@ -1,37 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiprint.h,v 1.10 2003/01/01 19:16:33 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIPRINT_H___ -#define ___ATIPRINT_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -extern void ATIPrintBIOS FunctionPrototype((const CARD8 *, - const unsigned int)); -extern void ATIPrintRegisters FunctionPrototype((ATIPtr)); -extern void ATIPrintMode FunctionPrototype((DisplayModePtr)); - -#endif /* ___ATIPRINT_H___ */ diff --git a/src/atipriv.h b/src/atipriv.h deleted file mode 100644 index 69341ba6..00000000 --- a/src/atipriv.h +++ /dev/null @@ -1,31 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atipriv.h,v 1.5 2003/01/01 19:16:33 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIPRIV_H___ -#define ___ATIPRIV_H___ 1 - -/* Forward pointer definitions */ -typedef struct _ATIHWRec *ATIHWPtr; -typedef struct _ATIRec *ATIPtr; - -#endif /* ___ATIPRIV_H___ */ diff --git a/src/atiprobe.c b/src/atiprobe.c deleted file mode 100644 index 8dc80ba1..00000000 --- a/src/atiprobe.c +++ /dev/null @@ -1,2370 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiprobe.c,v 1.60 2003/10/07 22:47:11 martin Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atiadjust.h" -#include "atibus.h" -#include "atichip.h" -#include "aticonsole.h" -#include "atiident.h" -#include "atimach64io.h" -#include "atimodule.h" -#include "atipreinit.h" -#include "atiprobe.h" -#include "atiscreen.h" -#include "ativalid.h" -#include "ativersion.h" -#include "atividmem.h" -#include "atiwonderio.h" - -#include "radeon_probe.h" -#include "radeon_version.h" -#include "r128_probe.h" -#include "r128_version.h" - -/* - * NOTES: - * - * - The driver private structures (ATIRec's) are allocated here, rather than - * in ATIPreInit(). This allows ATIProbe() to pass information to later - * stages. - * - A minor point, perhaps, is that XF86Config Chipset names denote functional - * levels, rather than specific graphics controller chips. - * - ATIProbe() does not call xf86MatchPciInstances(), because ATIProbe() - * should be able to match a mix of PCI and non-PCI devices to XF86Config - * Device sections. Also, PCI configuration space for Mach32's is to be - * largely ignored. - */ - -#ifdef XFree86LOADER - -/* - * The following exists to prevent the compiler from considering entry points - * defined in a separate module from being constants. - */ -static xf86PreInitProc * const volatile PreInitProc = ATIPreInit; -static xf86ScreenInitProc * const volatile ScreenInitProc = ATIScreenInit; -static xf86SwitchModeProc * const volatile SwitchModeProc = ATISwitchMode; -static xf86AdjustFrameProc * const volatile AdjustFrameProc = ATIAdjustFrame; -static xf86EnterVTProc * const volatile EnterVTProc = ATIEnterVT; -static xf86LeaveVTProc * const volatile LeaveVTProc = ATILeaveVT; -static xf86FreeScreenProc * const volatile FreeScreenProc = ATIFreeScreen; -static xf86ValidModeProc * const volatile ValidModeProc = ATIValidMode; - -#define ATIPreInit PreInitProc -#define ATIScreenInit ScreenInitProc -#define ATISwitchMode SwitchModeProc -#define ATIAdjustFrame AdjustFrameProc -#define ATIEnterVT EnterVTProc -#define ATILeaveVT LeaveVTProc -#define ATIFreeScreen FreeScreenProc -#define ATIValidMode ValidModeProc - -#endif - -/* Used as a temporary buffer */ -#define Identifier ((char *)(pATI->MMIOCache)) - -/* - * An internal structure definition to facilitate the matching of detected - * adapters to XF86Config Device sections. - */ -typedef struct _ATIGDev -{ - GDevPtr pGDev; - int iATIPtr; - CARD8 Chipset; -} ATIGDev, *ATIGDevPtr; - -#ifndef AVOID_CPIO - -/* - * Definitions for I/O conflict avoidance. - */ -#define LongPort(_Port) GetBits(_Port, PCIGETIO(SPARSE_IO_BASE)) -#define DetectedVGA (1 << 0) -#define Detected8514A (1 << 1) -#define DetectedMach64 (1 << 2) -#define Allowed (1 << 3) -#define DoProbe (1 << 4) -typedef struct -{ - IOADDRESS Base; - CARD8 Size; - CARD8 Flag; -} PortRec, *PortPtr; - -/* - * ATIScanPCIBases -- - * - * This function loops though a device's PCI registered bases and accumulates - * a list of block I/O bases in use in the system. - */ -static void -ATIScanPCIBases -( - PortPtr *PCIPorts, - int *nPCIPort, - const CARD32 *pBase, - const int *pSize, - const CARD8 ProbeFlag -) -{ - IOADDRESS Base; - int i, j; - - for (i = 6; --i >= 0; pBase++, pSize++) - { - if (*pBase & PCI_MAP_IO) - { - Base = *pBase & ~IO_BYTE_SELECT; - for (j = 0; ; j++) - { - if (j >= *nPCIPort) - { - (*nPCIPort)++; - *PCIPorts = (PortPtr)xnfrealloc(*PCIPorts, - *nPCIPort * SizeOf(PortRec)); - (*PCIPorts)[j].Base = Base; - (*PCIPorts)[j].Size = (CARD8)*pSize; - (*PCIPorts)[j].Flag = ProbeFlag; - break; - } - - if (Base == (*PCIPorts)[j].Base) - break; - } - - continue; - } - - /* Allow for 64-bit addresses */ - if (!PCI_MAP_IS64BITMEM(*pBase)) - continue; - - i--; - pBase++; - pSize++; - } -} - -/* - * ATICheckSparseIOBases -- - * - * This function checks whether a sparse I/O base can safely be probed. - */ -static CARD8 -ATICheckSparseIOBases -( - pciVideoPtr pVideo, - CARD8 *ProbeFlags, - const IOADDRESS IOBase, - const int Count, - const Bool Override -) -{ - CARD32 FirstPort, LastPort; - - if (!pVideo || !xf86IsPrimaryPci(pVideo)) - { - FirstPort = LongPort(IOBase); - LastPort = LongPort(IOBase + Count - 1); - - for (; FirstPort <= LastPort; FirstPort++) - { - CARD8 ProbeFlag = ProbeFlags[FirstPort]; - - if (ProbeFlag & DoProbe) - continue; - - if (!(ProbeFlag & Allowed)) - return ProbeFlag; - - if (Override) - continue; - - /* User might wish to override this decision */ - xf86Msg(X_WARNING, - ATI_NAME ": Sparse I/O base 0x%04lX not probed.\n", IOBase); - return Allowed; - } - } - - return DoProbe; -} - -/* - * ATIClaimSparseIOBases -- - * - * This function updates the sparse I/O base table with information from the - * hardware probes. - */ -static void -ATIClaimSparseIOBases -( - CARD8 *ProbeFlags, - const IOADDRESS IOBase, - const int Count, - const CARD8 ProbeFlag -) -{ - CARD32 FirstPort = LongPort(IOBase), - LastPort = LongPort(IOBase + Count - 1); - - for (; FirstPort <= LastPort; FirstPort++) - ProbeFlags[FirstPort] = ProbeFlag; -} - -/* - * ATIVGAProbe -- - * - * This function looks for an IBM standard VGA, or clone, and sets - * pATI->VGAAdapter if one is found. - */ -static ATIPtr -ATIVGAProbe -( - ATIPtr pVGA -) -{ - CARD8 IOValue1, IOValue2, IOValue3; - - if (!pVGA) - pVGA = (ATIPtr)xnfcalloc(1, SizeOf(ATIRec)); - - /* - * VGA has one more attribute register than EGA. See if it can be read and - * written. Note that the CRTC registers are not used here, so there's no - * need to unlock them. - */ - ATISetVGAIOBase(pVGA, inb(R_GENMO)); - (void)inb(GENS1(pVGA->CPIO_VGABase)); - IOValue1 = inb(ATTRX); - (void)inb(GENS1(pVGA->CPIO_VGABase)); - IOValue2 = GetReg(ATTRX, 0x14U | 0x20U); - outb(ATTRX, IOValue2 ^ 0x0FU); - IOValue3 = GetReg(ATTRX, 0x14U | 0x20U); - outb(ATTRX, IOValue2); - outb(ATTRX, IOValue1); - (void)inb(GENS1(pVGA->CPIO_VGABase)); - if (IOValue3 == (IOValue2 ^ 0x0FU)) - { - /* VGA device detected */ - if (pVGA->Chip == ATI_CHIP_NONE) - pVGA->Chip = ATI_CHIP_VGA; - if (pVGA->VGAAdapter == ATI_ADAPTER_NONE) - pVGA->VGAAdapter = ATI_ADAPTER_VGA; - if (pVGA->Adapter == ATI_ADAPTER_NONE) - pVGA->Adapter = ATI_ADAPTER_VGA; - } - else - { - pVGA->VGAAdapter = ATI_ADAPTER_NONE; - } - - return pVGA; -} - -/* - * ATIVGAWonderProbe -- - * - * This function determines if ATI extended VGA registers can be accessed - * through the I/O port specified by pATI->CPIO_VGAWonder. If not, the - * function resets pATI->CPIO_VGAWonder to zero. - */ -static void -ATIVGAWonderProbe -( - pciVideoPtr pVideo, - ATIPtr pATI, - ATIPtr p8514, - CARD8 *ProbeFlags -) -{ - CARD8 IOValue1, IOValue2, IOValue3, IOValue4, IOValue5, IOValue6; - - switch (ATICheckSparseIOBases(pVideo, ProbeFlags, - pATI->CPIO_VGAWonder, 2, TRUE)) - { - case 0: - xf86Msg(X_WARNING, - ATI_NAME ": Expected VGA Wonder capability could not be" - " detected at I/O port 0x%04lX because it would conflict with" - " a non-video PCI/AGP device.\n", pATI->CPIO_VGAWonder); - pATI->CPIO_VGAWonder = 0; - break; - - case Detected8514A: - xf86Msg(X_WARNING, - ATI_NAME ": Expected VGA Wonder capability could not be" - " detected at I/O port 0x%04lX because it would conflict with" - " a %s %s.\n", pATI->CPIO_VGAWonder, - ATIBusNames[p8514->BusType], ATIAdapterNames[p8514->Adapter]); - pATI->CPIO_VGAWonder = 0; - break; - - case DetectedMach64: - xf86Msg(X_WARNING, - ATI_NAME ": Expected VGA Wonder capability could not be" - " detected at I/O port 0x%04lX because it would conflict with" - " a Mach64.\n", pATI->CPIO_VGAWonder); - pATI->CPIO_VGAWonder = 0; - break; - - case DetectedVGA: - default: /* Must be DoProbe */ - if (pVideo && !xf86IsPrimaryPci(pVideo) && - (pATI->Chip <= ATI_CHIP_88800GXD)) - { - /* Set up extended VGA register addressing */ - PutReg(GRAX, 0x50U, GetByte(pATI->CPIO_VGAWonder, 0)); - PutReg(GRAX, 0x51U, - GetByte(pATI->CPIO_VGAWonder, 1) | pATI->VGAOffset); - } - /* - * Register 0xBB is used by the BIOS to keep track of various - * things (monitor type, etc.). Except for 18800-x's, register - * 0xBC must be zero and causes the adapter to enter a test mode - * when written to with a non-zero value. - */ - IOValue1 = inb(pATI->CPIO_VGAWonder); - IOValue2 = ATIGetExtReg(IOValue1); - IOValue3 = ATIGetExtReg(0xBBU); - ATIPutExtReg(0xBBU, IOValue3 ^ 0xAAU); - IOValue4 = ATIGetExtReg(0xBBU); - ATIPutExtReg(0xBBU, IOValue3 ^ 0x55U); - IOValue5 = ATIGetExtReg(0xBBU); - ATIPutExtReg(0xBBU, IOValue3); - if (pATI->Chip <= ATI_CHIP_18800_1) - IOValue6 = 0; - else - IOValue6 = ATIGetExtReg(0xBCU); - ATIPutExtReg(IOValue1, IOValue2); - - if ((IOValue4 == (IOValue3 ^ 0xAAU)) && - (IOValue5 == (IOValue3 ^ 0x55U)) && - (IOValue6 == 0)) - { - xf86MsgVerb(X_INFO, 3, - ATI_NAME ": VGA Wonder at I/O port 0x%04lX detected.\n", - pATI->CPIO_VGAWonder); - } - else - { - xf86Msg(X_WARNING, - ATI_NAME ": Expected VGA Wonder capability at I/O port" - " 0x%04lX was not detected.\n", pATI->CPIO_VGAWonder); - pATI->CPIO_VGAWonder = 0; - } - break; - } -} - -/* - * ATI8514Probe -- - * - * This function looks for an 8514/A compatible and returns an ATIRec if one is - * found. The function also determines whether or not the detected 8514/A - * compatible device is actually a Mach8 or Mach32, and sets pATI->Adapter - * accordingly. - */ -static ATIPtr -ATI8514Probe -( - pciVideoPtr pVideo -) -{ - ATIPtr pATI = NULL; - CARD16 IOValue1, IOValue2; - - /* - * Save register value to be modified, just in case there is no 8514/A - * compatible accelerator. Note that, in more ways than one, - * SUBSYS_STAT == SUBSYS_CNTL. - */ - IOValue1 = inw(SUBSYS_STAT); - IOValue2 = IOValue1 & _8PLANE; - - /* Reset any 8514/A compatible adapter that might be present */ - outw(SUBSYS_CNTL, IOValue2 | (GPCTRL_RESET | CHPTEST_NORMAL)); - outw(SUBSYS_CNTL, IOValue2 | (GPCTRL_ENAB | CHPTEST_NORMAL | - RVBLNKFLG | RPICKFLAG | RINVALIDIO | RGPIDLE)); - - /* Probe for an 8514/A compatible */ - IOValue2 = inw(ERR_TERM); - outw(ERR_TERM, 0x5A5AU); - ProbeWaitIdleEmpty(); - if (inw(ERR_TERM) == 0x5A5AU) - { - outw(ERR_TERM, 0x2525U); - if (inw(ERR_TERM) == 0x2525U) - { - pATI = (ATIPtr)xnfcalloc(1, SizeOf(ATIRec)); - pATI->Adapter = ATI_ADAPTER_8514A; - pATI->ChipHasSUBSYS_CNTL = TRUE; - pATI->PCIInfo = pVideo; - } - } - outw(ERR_TERM, IOValue2); - - /* Restore register value clobbered by 8514/A reset attempt */ - if (!pATI) - { - outw(SUBSYS_CNTL, IOValue1); - return NULL; - } - - /* Ensure any Mach8 or Mach32 is not in 8514/A emulation mode */ - IOValue1 = inw(CLOCK_SEL); - outw(CLOCK_SEL, IOValue1); - ProbeWaitIdleEmpty(); - - IOValue1 = IOValue2 = inw(ROM_ADDR_1); - outw(ROM_ADDR_1, 0x5555U); - ProbeWaitIdleEmpty(); - if (inw(ROM_ADDR_1) == 0x5555U) - { - outw(ROM_ADDR_1, 0x2A2AU); - ProbeWaitIdleEmpty(); - if (inw(ROM_ADDR_1) == 0x2A2AU) - pATI->Adapter = ATI_ADAPTER_MACH8; - } - outw(ROM_ADDR_1, IOValue1); - - if (pATI->Adapter == ATI_ADAPTER_MACH8) - { - /* A Mach8 or Mach32 has been detected */ - IOValue1 = inw(READ_SRC_X); - outw(DESTX_DIASTP, 0xAAAAU); - ProbeWaitIdleEmpty(); - if (inw(READ_SRC_X) == 0x02AAU) - pATI->Adapter = ATI_ADAPTER_MACH32; - - outw(DESTX_DIASTP, 0x5555U); - ProbeWaitIdleEmpty(); - if (inw(READ_SRC_X) == 0x0555U) - { - if (pATI->Adapter != ATI_ADAPTER_MACH32) - pATI->Adapter = ATI_ADAPTER_8514A; - } - else - { - if (pATI->Adapter != ATI_ADAPTER_MACH8) - pATI->Adapter = ATI_ADAPTER_8514A; - } - outw(DESTX_DIASTP, IOValue1); - } - - switch (pATI->Adapter) - { - case ATI_ADAPTER_8514A: - pATI->Coprocessor = ATI_CHIP_8514A; - IOValue1 = inb(EXT_CONFIG_3); - outb(EXT_CONFIG_3, IOValue1 & 0x0FU); - if (!(inb(EXT_CONFIG_3) & 0xF0U)) - { - outb(EXT_CONFIG_3, IOValue1 | 0xF0U); - if ((inb(EXT_CONFIG_3) & 0xF0U) == 0xF0U) - pATI->Coprocessor = ATI_CHIP_CT480; - } - outb(EXT_CONFIG_3, IOValue1); - break; - - case ATI_ADAPTER_MACH8: - pATI->Coprocessor = ATI_CHIP_38800_1; - if (inw(CONFIG_STATUS_1) & MC_BUS) - pATI->BusType = ATI_BUS_MCA16; - break; - - case ATI_ADAPTER_MACH32: - IOValue1 = inw(CONFIG_STATUS_1); - pATI->BusType = GetBits(IOValue1, BUS_TYPE); - pATI->BIOSBase = 0x000C0000U + - (GetBits(IOValue2, BIOS_BASE_SEGMENT) << 11); - if (!(IOValue1 & (_8514_ONLY | CHIP_DIS))) - { - pATI->VGAAdapter = ATI_ADAPTER_MACH32; - if ((xf86ReadBIOS(pATI->BIOSBase, 0x10U, - (pointer)(&pATI->CPIO_VGAWonder), - SizeOf(pATI->CPIO_VGAWonder)) < - SizeOf(pATI->CPIO_VGAWonder)) || - !(pATI->CPIO_VGAWonder &= SPARSE_IO_PORT)) - pATI->CPIO_VGAWonder = 0x01CEU; - pATI->VGAOffset = 0x80U; - } - - ATIMach32ChipID(pATI); - break; - - default: - break; - } - - return pATI; -} - -#endif /* AVOID_CPIO */ - -/* - * ATIMach64Detect -- - * - * This function determines if a Mach64 is detectable at a particular base - * address. - */ -static Bool -ATIMach64Detect -( - ATIPtr pATI, - const CARD16 ChipType, - const ATIChipType Chip -) -{ - CARD32 IOValue, bus_cntl, gen_test_cntl; - - (void)ATIMapApertures(-1, pATI); /* Ignore errors */ - -#ifdef AVOID_CPIO - - if (!pATI->pBlock[0]) - { - ATIUnmapApertures(-1, pATI); - return FALSE; - } - -#endif /* AVOID_CPIO */ - - /* Make sure any Mach64 is not in some weird state */ - bus_cntl = inr(BUS_CNTL); - if (Chip < ATI_CHIP_264VTB) - outr(BUS_CNTL, - (bus_cntl & ~(BUS_HOST_ERR_INT_EN | BUS_FIFO_ERR_INT_EN)) | - (BUS_HOST_ERR_INT | BUS_FIFO_ERR_INT)); - else if (Chip < ATI_CHIP_264VT4) - outr(BUS_CNTL, (bus_cntl & ~BUS_HOST_ERR_INT_EN) | BUS_HOST_ERR_INT); - - gen_test_cntl = inr(GEN_TEST_CNTL); - IOValue = gen_test_cntl & - (GEN_OVR_OUTPUT_EN | GEN_OVR_POLARITY | GEN_CUR_EN | GEN_BLOCK_WR_EN); - outr(GEN_TEST_CNTL, IOValue | GEN_GUI_EN); - outr(GEN_TEST_CNTL, IOValue); - outr(GEN_TEST_CNTL, IOValue | GEN_GUI_EN); - - /* See if a Mach64 answers */ - IOValue = inr(SCRATCH_REG0); - - /* Test odd bits */ - outr(SCRATCH_REG0, 0x55555555U); - if (inr(SCRATCH_REG0) == 0x55555555U) - { - /* Test even bits */ - outr(SCRATCH_REG0, 0xAAAAAAAAU); - if (inr(SCRATCH_REG0) == 0xAAAAAAAAU) - { - /* - * *Something* has a R/W 32-bit register at this address. Try to - * make sure it's a Mach64. The following assumes that ATI will - * not be producing any more adapters that do not register - * themselves in PCI configuration space. - */ - ATIMach64ChipID(pATI, ChipType); - if ((pATI->Chip != ATI_CHIP_Mach64) || - (pATI->CPIODecoding == BLOCK_IO)) - pATI->Adapter = ATI_ADAPTER_MACH64; - } - } - - /* Restore clobbered register value */ - outr(SCRATCH_REG0, IOValue); - - /* If no Mach64 was detected, return now */ - if (pATI->Adapter != ATI_ADAPTER_MACH64) - { - outr(GEN_TEST_CNTL, gen_test_cntl); - outr(BUS_CNTL, bus_cntl); - ATIUnmapApertures(-1, pATI); - return FALSE; - } - - /* Determine legacy BIOS address */ - pATI->BIOSBase = 0x000C0000U + - (GetBits(inr(SCRATCH_REG1), BIOS_BASE_SEGMENT) << 11); - - ATIUnmapApertures(-1, pATI); - pATI->PCIInfo = NULL; - return TRUE; -} - -#ifdef AVOID_CPIO - -/* - * ATIMach64Probe -- - * - * This function looks for a Mach64 at a particular MMIO address and returns an - * ATIRec if one is found. - */ -static ATIPtr -ATIMach64Probe -( - pciVideoPtr pVideo, - const IOADDRESS IOBase, - const CARD8 IODecoding, - const ATIChipType Chip -) -{ - ATIPtr pATI = (ATIPtr)xnfcalloc(1, SizeOf(ATIRec)); - CARD16 ChipType = 0; - - pATI->CPIOBase = IOBase; - pATI->CPIODecoding = IODecoding; - - if (pVideo) - { - pATI->PCIInfo = pVideo; - ChipType = pVideo->chipType; - - /* - * Probe through auxiliary MMIO aperture if one exists. Because such - * apertures can be enabled/disabled only through PCI, this probes no - * further. - */ - if ((pVideo->size[2] >= 12) && - (pATI->Block0Base = pVideo->memBase[2]) && - (pATI->Block0Base < (CARD32)(-1 << pVideo->size[2]))) - { - pATI->Block0Base += 0x00000400U; - goto LastProbe; - } - - /* - * Probe through the primary MMIO aperture that exists at the tail end - * of the linear aperture. Test for both 8MB and 4MB linear apertures. - */ - if ((pVideo->size[0] >= 22) && (pATI->Block0Base = pVideo->memBase[0])) - { - pATI->Block0Base += 0x007FFC00U; - if ((pVideo->size[0] >= 23) && - ATIMach64Detect(pATI, ChipType, Chip)) - return pATI; - - pATI->Block0Base -= 0x00400000U; - if (ATIMach64Detect(pATI, ChipType, Chip)) - return pATI; - } - } - - /* - * A last, perhaps desparate, probe attempt. Note that if this succeeds, - * there's a VGA in the system and it's likely the PIO version of the - * driver should be used instead (barring OS issues). - */ - pATI->Block0Base = 0x000BFC00U; - -LastProbe: - if (ATIMach64Detect(pATI, ChipType, Chip)) - return pATI; - - xfree(pATI); - return NULL; -} - -#else /* AVOID_CPIO */ - -/* - * ATIMach64Probe -- - * - * This function looks for a Mach64 at a particular PIO address and returns an - * ATIRec if one is found. - */ -static ATIPtr -ATIMach64Probe -( - pciVideoPtr pVideo, - const IOADDRESS IOBase, - const CARD8 IODecoding, - const ATIChipType Chip -) -{ - ATIPtr pATI; - CARD32 IOValue; - CARD16 ChipType = 0; - - if (!IOBase) - return NULL; - - if (pVideo) - { - if ((IODecoding == BLOCK_IO) && - ((pVideo->size[1] < 8) || - (IOBase >= (CARD32)(-1 << pVideo->size[1])))) - return NULL; - - ChipType = pVideo->chipType; - } - - pATI = (ATIPtr)xnfcalloc(1, SizeOf(ATIRec)); - pATI->CPIOBase = IOBase; - pATI->CPIODecoding = IODecoding; - pATI->PCIInfo = pVideo; - - if (!ATIMach64Detect(pATI, ChipType, Chip)) - { - xfree(pATI); - return NULL; - } - - /* - * Determine VGA capability. VGA can always be enabled on integrated - * controllers. For the GX/CX, it's a board strap. - */ - if (pATI->Chip >= ATI_CHIP_264CT) - { - pATI->VGAAdapter = ATI_ADAPTER_MACH64; - } - else - { - IOValue = inr(CONFIG_STATUS64_0); - pATI->BusType = GetBits(IOValue, CFG_BUS_TYPE); - IOValue &= (CFG_VGA_EN | CFG_CHIP_EN); - if (pATI->Chip == ATI_CHIP_88800CX) - IOValue |= CFG_VGA_EN; - if (IOValue == (CFG_VGA_EN | CFG_CHIP_EN)) - { - pATI->VGAAdapter = ATI_ADAPTER_MACH64; - pATI->CPIO_VGAWonder = 0x01CEU; - pATI->VGAOffset = 0x80U; - } - } - - return pATI; -} - -/* - * ATIAssignVGA -- - * - * This function is called to associate a VGA interface with an accelerator. - * This is done by temporarily configuring the accelerator to route VGA RAMDAC - * I/O through the accelerator's RAMDAC. A value is then written through the - * VGA DAC ports and a check is made to see if the same value shows up on the - * accelerator side. - */ -static void -ATIAssignVGA -( - pciVideoPtr pVideo, - ATIPtr *ppVGA, - ATIPtr pATI, - ATIPtr p8514, - CARD8 *ProbeFlags -) -{ - ATIPtr pVGA = *ppVGA; - CARD8 OldDACMask; - - /* Assume unassignable VGA */ - pATI->VGAAdapter = ATI_ADAPTER_NONE; - - /* If no assignable VGA, return now */ - if ((pATI != pVGA) && (!pVGA || (pVGA->Adapter > ATI_ADAPTER_VGA))) - return; - - switch (pATI->Adapter) - { - case ATI_ADAPTER_8514A: - { - /* - * Assumption: Bit DISABPASSTHRU in ADVFUNC_CNTL is already - * off. - */ - OldDACMask = inb(VGA_DAC_MASK); - - if (inb(IBM_DAC_MASK) == OldDACMask) - { - outb(VGA_DAC_MASK, 0xA5U); - if (inb(IBM_DAC_MASK) == 0xA5U) - pATI->VGAAdapter = ATI_ADAPTER_VGA; - } - - outb(VGA_DAC_MASK, OldDACMask); - } - break; - - case ATI_ADAPTER_MACH8: - { - CARD16 ClockSel = inw(CLOCK_SEL); - - if (ClockSel & DISABPASSTHRU) - outw(CLOCK_SEL, ClockSel & ~DISABPASSTHRU); - - ProbeWaitIdleEmpty(); - - OldDACMask = inb(VGA_DAC_MASK); - - if (inb(IBM_DAC_MASK) == OldDACMask) - { - outb(VGA_DAC_MASK, 0xA5U); - if (inb(IBM_DAC_MASK) == 0xA5U) - pATI->VGAAdapter = ATI_ADAPTER_VGA; - } - - outb(VGA_DAC_MASK, OldDACMask); - - if (ClockSel & DISABPASSTHRU) - outw(CLOCK_SEL, ClockSel); - } - break; - - case ATI_ADAPTER_MACH32: - { - CARD16 ClockSel = inw(CLOCK_SEL), - MiscOptions = inw(MISC_OPTIONS); - - if (ClockSel & DISABPASSTHRU) - outw(CLOCK_SEL, ClockSel & ~DISABPASSTHRU); - if (MiscOptions & (DISABLE_VGA | DISABLE_DAC)) - outw(MISC_OPTIONS, - MiscOptions & ~(DISABLE_VGA | DISABLE_DAC)); - - ProbeWaitIdleEmpty(); - - OldDACMask = inb(VGA_DAC_MASK); - - if (inb(IBM_DAC_MASK) == OldDACMask) - { - outb(VGA_DAC_MASK, 0xA5U); - if (inb(IBM_DAC_MASK) == 0xA5U) - pATI->VGAAdapter = ATI_ADAPTER_MACH32; - } - - outb(VGA_DAC_MASK, OldDACMask); - - if (ClockSel & DISABPASSTHRU) - outw(CLOCK_SEL, ClockSel); - if (MiscOptions & (DISABLE_VGA | DISABLE_DAC)) - outw(MISC_OPTIONS, MiscOptions); - } - break; - - case ATI_ADAPTER_MACH64: - { - CARD32 DACCntl = inr(DAC_CNTL); - - if (!(DACCntl & DAC_VGA_ADR_EN)) - outr(DAC_CNTL, DACCntl | DAC_VGA_ADR_EN); - - OldDACMask = inb(VGA_DAC_MASK); - - if (in8(M64_DAC_MASK) == OldDACMask) - { - outb(VGA_DAC_MASK, 0xA5U); - if (in8(M64_DAC_MASK) == 0xA5U) - pATI->VGAAdapter = ATI_ADAPTER_MACH64; - } - - outb(VGA_DAC_MASK, OldDACMask); - - if (!(DACCntl & DAC_VGA_ADR_EN)) - outr(DAC_CNTL, DACCntl); - } - break; - - default: - break; - } - - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - { - pATI->CPIO_VGAWonder = 0; - return; - } - - if (pATI->CPIO_VGAWonder) - { - ATIVGAWonderProbe(pVideo, pATI, p8514, ProbeFlags); - if (!pATI->CPIO_VGAWonder) - { - /* - * Some adapters are reputed to append ATI extended VGA registers - * to the VGA Graphics controller registers. In particular, 0x01CE - * cannot, in general, be used in a PCI environment due to routing - * of I/O through the bus tree. - */ - pATI->CPIO_VGAWonder = GRAX; - ATIVGAWonderProbe(pVideo, pATI, p8514, ProbeFlags); - } - } - - if (pATI == pVGA) - { - pATI->SharedVGA = TRUE; - return; - } - - /* Assign the VGA to this adapter */ - xfree(pVGA); - *ppVGA = pATI; - - xf86MsgVerb(X_INFO, 3, ATI_NAME ": VGA assigned to this adapter.\n"); -} - -/* - * ATIClaimVGA -- - * - * Attempt to assign a non-shareable VGA to an accelerator. If successful, - * update ProbeFlags array. - */ -static void -ATIClaimVGA -( - pciVideoPtr pVideo, - ATIPtr *ppVGA, - ATIPtr pATI, - ATIPtr p8514, - CARD8 *ProbeFlags, - int Detected -) -{ - ATIAssignVGA(pVideo, ppVGA, pATI, p8514, ProbeFlags); - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - return; - - ATIClaimSparseIOBases(ProbeFlags, MonochromeIOBase, 48, Detected); - if (!pATI->CPIO_VGAWonder) - return; - - ATIClaimSparseIOBases(ProbeFlags, pATI->CPIO_VGAWonder, 2, Detected); -} - -/* - * ATIFindVGA -- - * - * This function determines if a VGA associated with an ATI PCI adapter is - * shareable. - */ -static void -ATIFindVGA -( - pciVideoPtr pVideo, - ATIPtr *ppVGA, - ATIPtr *ppATI, - ATIPtr p8514, - CARD8 *ProbeFlags -) -{ - ATIPtr pATI = *ppATI; - - if (!*ppVGA) - { - /* - * An ATI PCI adapter has been detected at this point, and its VGA, if - * any, is shareable. Ensure the VGA isn't in sleep mode. - */ - outb(GENENA, 0x16U); - outb(GENVS, 0x01U); - outb(GENENA, 0x0EU); - - pATI = ATIVGAProbe(pATI); - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - return; - - ppVGA = ppATI; - } - - ATIAssignVGA(pVideo, ppVGA, pATI, p8514, ProbeFlags); -} - -#endif /* AVOID_CPIO */ - -/* - * ATIProbe -- - * - * This function is called once, at the start of the first server generation to - * do a minimal probe for supported hardware. - */ -Bool -ATIProbe -( - DriverPtr pDriver, - int flags -) -{ - ATIPtr pATI, *ATIPtrs = NULL; - GDevPtr *GDevs, pGDev; - pciVideoPtr pVideo, *xf86PciVideoInfo = xf86GetPciVideoInfo(); - pciConfigPtr pPCI; - ATIGDev *ATIGDevs = NULL, *pATIGDev; - ScrnInfoPtr pScreenInfo; - CARD32 PciReg; - Bool ProbeSuccess = FALSE; - Bool DoRage128 = FALSE, DoRadeon = FALSE; - int i, j, k; - int nGDev, nATIGDev = -1, nATIPtr = 0; - int Chipset; - ATIChipType Chip; - -#ifndef AVOID_CPIO - - ATIPtr pVGA = NULL, p8514 = NULL; - ATIPtr pMach64[3] = {NULL, NULL, NULL}; - pciConfigPtr *xf86PciInfo = xf86GetPciConfigInfo(); - PortPtr PCIPorts = NULL; - int nPCIPort = 0; - CARD8 fChipsets[ATI_CHIPSET_MAX]; - static const IOADDRESS Mach64SparseIOBases[] = {0x02ECU, 0x01CCU, 0x01C8U}; - CARD8 ProbeFlags[LongPort(SPARSE_IO_BASE) + 1]; - - unsigned long BIOSBase; - static const CARD8 ATISignature[] = " 761295520"; -# define SignatureSize 10 -# define PrefixSize 0x50U -# define BIOSSignature 0x30U - CARD8 BIOS[PrefixSize]; -# define BIOSWord(_n) (BIOS[_n] | (BIOS[(_n) + 1] << 8)) - -#endif /* AVOID_CPIO */ - -# define AddAdapter(_p) \ - do \ - { \ - nATIPtr++; \ - ATIPtrs = (ATIPtr *)xnfrealloc(ATIPtrs, SizeOf(ATIPtr) * nATIPtr); \ - ATIPtrs[nATIPtr - 1] = (_p); \ - (_p)->iEntity = -2; \ - } while (0) - -#ifndef AVOID_CPIO - - (void)memset(fChipsets, FALSE, SizeOf(fChipsets)); - -#endif /* AVOID_CPIO */ - - if (!(flags & PROBE_DETECT)) - { - /* - * Get a list of XF86Config device sections whose "Driver" is either - * not specified, or specified as this driver. From this list, - * eliminate those device sections that specify a "Chipset" or a - * "ChipID" not recognised by the driver. Those device sections that - * specify a "ChipRev" without a "ChipID" are also weeded out. - */ - nATIGDev = 0; - if ((nGDev = xf86MatchDevice(ATI_NAME, &GDevs)) > 0) - { - ATIGDevs = (ATIGDevPtr)xnfcalloc(nGDev, SizeOf(ATIGDev)); - - for (i = 0, pATIGDev = ATIGDevs; i < nGDev; i++) - { - pGDev = GDevs[i]; - Chipset = ATIIdentProbe(pGDev->chipset); - if (Chipset == -1) - continue; - - if ((pGDev->chipID > (int)((CARD16)(-1))) || - (pGDev->chipRev > (int)((CARD8)(-1)))) - continue; - - if (pGDev->chipID >= 0) - { - if (ATIChipID(pGDev->chipID, 0) == ATI_CHIP_Mach64) - continue; - } - else - { - if (pGDev->chipRev >= 0) - continue; - } - - pATIGDev->pGDev = pGDev; - pATIGDev->Chipset = Chipset; - nATIGDev++; - pATIGDev++; - - xf86MsgVerb(X_INFO, 3, - ATI_NAME ": Candidate \"Device\" section \"%s\".\n", - pGDev->identifier); - -#ifndef AVOID_CPIO - - fChipsets[Chipset] = TRUE; - -#endif /* AVOID_CPIO */ - - } - - xfree(GDevs); - - if (!nATIGDev) - { - xfree(ATIGDevs); - ATIGDevs = NULL; - } - } - - if (xf86MatchDevice(R128_NAME, NULL) > 0) - DoRage128 = TRUE; - if (xf86MatchDevice(RADEON_NAME, NULL) > 0) - DoRadeon = TRUE; - } - -#ifndef AVOID_CPIO - - /* - * Collect hardware information. This must be done with care to avoid - * lockups due to overlapping I/O port assignments. - * - * First, scan PCI configuration space for registered I/O ports (which will - * be block I/O bases). Each such port is used to generate a list of - * sparse I/O bases it precludes. This list is then used to decide whether - * or not certain sparse I/O probes are done. Unfortunately, this assumes - * that any registered I/O base actually reserves upto the full 256 ports - * allowed by the PCI specification. This assumption holds true for PCI - * Mach64, but probably doesn't for other device types. For some things, - * such as video devices, the number of ports a base represents is - * determined by the server's PCI probe, but, for other devices, this - * cannot be done by a user-level process without jeopardizing system - * integrity. This information should ideally be retrieved from the OS's - * own PCI probe (if any), but there's currently no portable way of doing - * so. The following allows sparse I/O probes to be forced in certain - * circumstances when an appropriate chipset specification is used in any - * XF86Config Device section. - * - * Note that this is not bullet-proof. Lockups can still occur, but they - * will usually be due to devices that are misconfigured to respond to the - * same I/O ports as 8514/A's or ATI sparse I/O devices without registering - * them in PCI configuration space. - */ - if (nATIGDev) - { - if (xf86PciVideoInfo) - { - for (i = 0; (pVideo = xf86PciVideoInfo[i++]); ) - { - if ((pVideo->vendor == PCI_VENDOR_ATI) || - !(pPCI = pVideo->thisCard)) - continue; - - ATIScanPCIBases(&PCIPorts, &nPCIPort, - &pPCI->pci_base0, pVideo->size, - (pciReadLong(pPCI->tag, PCI_CMD_STAT_REG) & - PCI_CMD_IO_ENABLE) ? 0 : Allowed); - } - } - - /* Check non-video PCI devices for I/O bases */ - if (xf86PciInfo) - { - for (i = 0; (pPCI = xf86PciInfo[i++]); ) - { - if ((pPCI->pci_vendor == PCI_VENDOR_ATI) || - (pPCI->pci_base_class == PCI_CLASS_BRIDGE) || - (pPCI->pci_header_type & - ~GetByte(PCI_HEADER_MULTIFUNCTION, 2))) - continue; - - ATIScanPCIBases(&PCIPorts, &nPCIPort, - &pPCI->pci_base0, pPCI->basesize, - (pciReadLong(pPCI->tag, PCI_CMD_STAT_REG) & - PCI_CMD_IO_ENABLE) ? 0 : Allowed); - } - } - - /* Generate ProbeFlags array from list of registered PCI I/O bases */ - (void)memset(ProbeFlags, Allowed | DoProbe, SizeOf(ProbeFlags)); - for (i = 0; i < nPCIPort; i++) - { - CARD32 Base = PCIPorts[i].Base; - CARD16 Count = (1 << PCIPorts[i].Size) - 1; - CARD8 ProbeFlag = PCIPorts[i].Flag; - - /* - * The following reduction of Count is based on the assumption that - * PCI-registered I/O port ranges do not overlap. - */ - for (j = 0; j < nPCIPort; j++) - { - CARD32 Base2 = PCIPorts[j].Base; - - if (Base < Base2) - while ((Base + Count) >= Base2) - Count >>= 1; - } - - Base = LongPort(Base); - Count = LongPort((Count | IO_BYTE_SELECT) + 1); - while (Count--) - ProbeFlags[Base++] &= ProbeFlag; - } - - xfree(PCIPorts); - - /* - * A note on probe strategy. I/O and memory response by certain PCI - * devices has been disabled by the common layer at this point, - * including any devices this driver might be interested in. The - * following does sparse I/O probes, followed by block I/O probes. - * Block I/O probes are dictated by what is found to be of interest in - * PCI configuration space. All this will detect ATI adapters that do - * not implement this disablement, pre-PCI or not. - * - * PCI configuration space is then scanned again for ATI devices that - * failed to be detected the first time around. Each such device is - * probed for again, this time with I/O temporarily enabled through - * PCI. - */ - if (ATICheckSparseIOBases(NULL, ProbeFlags, ATTRX, 16, TRUE) == - DoProbe) - { - pATI = ATIVGAProbe(NULL); - if (pATI->Adapter == ATI_ADAPTER_NONE) - { - xfree(pATI); - - xf86MsgVerb(X_INFO, 4, - ATI_NAME ": Unshared VGA not detected.\n"); - } - else - { - /* - * Claim all MDA/HGA/CGA/EGA/VGA I/O ports. This might need to - * be more selective. - */ - ATIClaimSparseIOBases(ProbeFlags, MonochromeIOBase, 48, - DetectedVGA); - - pVGA = pATI; - strcpy(Identifier, "Unshared VGA"); - xf86MsgVerb(X_INFO, 3, - ATI_NAME ": %s detected.\n", Identifier); - } - } - else - { - xf86MsgVerb(X_INFO, 2, ATI_NAME ": Unshared VGA not probed.\n"); - } - - if (ATICheckSparseIOBases(NULL, ProbeFlags, 0x02E8U, 8, - fChipsets[ATI_CHIPSET_IBM8514] || - fChipsets[ATI_CHIPSET_MACH8] || - fChipsets[ATI_CHIPSET_MACH32]) == DoProbe) - { - if ((pATI = ATI8514Probe(NULL))) - { - strcpy(Identifier, "Unshared 8514/A"); - xf86MsgVerb(X_INFO, 3, - ATI_NAME ": %s detected.\n", Identifier); - - AddAdapter(p8514 = pATI); - - if ((pATI->VGAAdapter != ATI_ADAPTER_NONE) || - (pATI->Coprocessor != ATI_CHIP_NONE)) - ATIClaimVGA(NULL, &pVGA, pATI, p8514, ProbeFlags, - Detected8514A); - - ATIClaimSparseIOBases(ProbeFlags, 0x02E8U, 8, Detected8514A); - } - else - { - xf86MsgVerb(X_INFO, 4, - ATI_NAME ": Unshared 8514/A not detected.\n"); - } - } - else - { - xf86MsgVerb(X_INFO, 2, - ATI_NAME ": Unshared 8514/A not probed.\n"); - } - - for (i = 0; i < NumberOf(Mach64SparseIOBases); i++) - { - if (ATICheckSparseIOBases(NULL, ProbeFlags, Mach64SparseIOBases[i], - 4, fChipsets[ATI_CHIPSET_MACH64]) != DoProbe) - { - xf86MsgVerb(X_INFO, 2, - ATI_NAME ": Unshared Mach64 at PIO base 0x%04lX not" - " probed.\n", - Mach64SparseIOBases[i]); - continue; - } - - pATI = ATIMach64Probe(NULL, Mach64SparseIOBases[i], SPARSE_IO, 0); - if (!pATI) - { - xf86MsgVerb(X_INFO, 4, - ATI_NAME ": Unshared Mach64 at PIO base 0x%04lX not" - " detected.\n", Mach64SparseIOBases[i]); - continue; - } - - sprintf(Identifier, "Unshared Mach64 at sparse PIO base 0x%04lX", - Mach64SparseIOBases[i]); - xf86MsgVerb(X_INFO, 3, ATI_NAME ": %s detected.\n", Identifier); - - AddAdapter(pMach64[i] = pATI); - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - ATIClaimVGA(NULL, &pVGA, pATI, p8514, ProbeFlags, - DetectedMach64); - - ATIClaimSparseIOBases(ProbeFlags, Mach64SparseIOBases[i], 4, - DetectedMach64); - } - } - -#endif /* AVOID_CPIO */ - - if (xf86PciVideoInfo) - { - if (nATIGDev) - { - -#ifndef AVOID_NON_PCI - -#ifdef AVOID_CPIO - - /* PCI sparse I/O adapters can still be used through MMIO */ - for (i = 0; (pVideo = xf86PciVideoInfo[i++]); ) - { - if ((pVideo->vendor != PCI_VENDOR_ATI) || - (pVideo->chipType == PCI_CHIP_MACH32) || - pVideo->size[1] || - !(pPCI = pVideo->thisCard)) - continue; - - PciReg = pciReadLong(pPCI->tag, PCI_REG_USERCONFIG); - - /* Possibly fix block I/O indicator */ - if (PciReg & 0x00000004U) - pciWriteLong(pPCI->tag, PCI_REG_USERCONFIG, - PciReg & ~0x00000004U); - - Chip = ATIChipID(pVideo->chipType, pVideo->chipRev); - - /* - * The CPIO base used by the adapter is of little concern here. - */ - pATI = ATIMach64Probe(pVideo, 0, SPARSE_IO, Chip); - if (!pATI) - continue; - - sprintf(Identifier, - "Unshared PCI sparse I/O Mach64 in slot %d:%d:%d", - pVideo->bus, pVideo->device, pVideo->func); - xf86MsgVerb(X_INFO, 3, - ATI_NAME ": %s detected through Block 0 at 0x%08X.\n", - Identifier, pATI->Block0Base); - AddAdapter(pATI); - pATI->PCIInfo = pVideo; - } - -#endif /* AVOID_CPIO */ - - for (i = 0; (pVideo = xf86PciVideoInfo[i++]); ) - { - if ((pVideo->vendor != PCI_VENDOR_ATI) || - (pVideo->chipType == PCI_CHIP_MACH32) || - !pVideo->size[1]) - continue; - - /* For now, ignore Rage128's and Radeon's */ - Chip = ATIChipID(pVideo->chipType, pVideo->chipRev); - if ((Chip > ATI_CHIP_Mach64) || - !(pPCI = pVideo->thisCard)) - continue; - - /* - * Possibly fix block I/O indicator in PCI configuration space. - */ - PciReg = pciReadLong(pPCI->tag, PCI_REG_USERCONFIG); - if (!(PciReg & 0x00000004U)) - pciWriteLong(pPCI->tag, PCI_REG_USERCONFIG, - PciReg | 0x00000004U); - - pATI = - ATIMach64Probe(pVideo, pVideo->ioBase[1], BLOCK_IO, Chip); - if (!pATI) - continue; - - sprintf(Identifier, "Unshared PCI/AGP Mach64 in slot %d:%d:%d", - pVideo->bus, pVideo->device, pVideo->func); - xf86MsgVerb(X_INFO, 3, - ATI_NAME ": %s detected.\n", Identifier); - AddAdapter(pATI); - -#ifndef AVOID_CPIO - - /* This is probably not necessary */ - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - ATIClaimVGA(pVideo, &pVGA, pATI, p8514, - ProbeFlags, DetectedMach64); - -#endif /* AVOID_CPIO */ - - } - -#endif /* AVOID_NON_PCI */ - -#ifndef AVOID_CPIO - - /* - * This is the second pass through PCI configuration space. Much - * of this is verbiage to deal with potential situations that are - * very unlikely to occur in practice. - * - * First, look for non-ATI shareable VGA's. For now, these must - * the primary device. - */ - if (ATICheckSparseIOBases(NULL, ProbeFlags, ATTRX, 16, TRUE) == - DoProbe) - { - for (i = 0; (pVideo = xf86PciVideoInfo[i++]); ) - { - if ((pVideo->vendor == PCI_VENDOR_ATI) || - !xf86IsPrimaryPci(pVideo)) - continue; - - if (!xf86CheckPciSlot(pVideo->bus, - pVideo->device, - pVideo->func)) - continue; - - xf86SetPciVideo(pVideo, MEM_IO); - - pATI = ATIVGAProbe(NULL); - if (pATI->Adapter == ATI_ADAPTER_NONE) - { - xfree(pATI); - xf86Msg(X_WARNING, - ATI_NAME ": PCI/AGP VGA compatible in slot" - " %d:%d:%d could not be detected!\n", - pVideo->bus, pVideo->device, pVideo->func); - } - else - { - sprintf(Identifier, - "Shared non-ATI VGA in PCI/AGP slot %d:%d:%d", - pVideo->bus, pVideo->device, pVideo->func); - xf86MsgVerb(X_INFO, 3, ATI_NAME ": %s detected.\n", - Identifier); - AddAdapter(pATI); - pATI->SharedVGA = TRUE; - pATI->BusType = ATI_BUS_PCI; - pATI->PCIInfo = pVideo; - } - - xf86SetPciVideo(NULL, NONE); - } - } - - /* Next, look for PCI Mach32's */ - for (i = 0; (pVideo = xf86PciVideoInfo[i++]); ) - { - if ((pVideo->vendor != PCI_VENDOR_ATI) || - (pVideo->chipType != PCI_CHIP_MACH32)) - continue; - - switch (ATICheckSparseIOBases(pVideo, ProbeFlags, - 0x02E8U, 8, TRUE)) - { - case 0: - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach32 in slot %d:%d:%d will not" - " be enabled\n because it conflicts with a" - " non-video PCI/AGP device.\n", - pVideo->bus, pVideo->device, pVideo->func); - break; - - case Detected8514A: - if ((p8514->BusType >= ATI_BUS_PCI) && !p8514->PCIInfo) - p8514->PCIInfo = pVideo; - else - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach32 in slot %d:%d:%d will" - " not be enabled\n because it conflicts with" - " another %s %s.\n", - pVideo->bus, pVideo->device, pVideo->func, - ATIBusNames[p8514->BusType], - ATIAdapterNames[p8514->Adapter]); - break; - - case DetectedMach64: - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach32 in slot %d:%d:%d will not" - " be enabled\n because it conflicts with a Mach64" - " at I/O base 0x02EC.\n", - pVideo->bus, pVideo->device, pVideo->func); - break; - - default: /* Must be DoProbe */ - if (!xf86CheckPciSlot(pVideo->bus, - pVideo->device, - pVideo->func)) - continue; - - xf86SetPciVideo(pVideo, MEM_IO); - - if (!(pATI = ATI8514Probe(pVideo))) - { - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach32 in slot %d:%d:%d could" - " not be detected!\n", - pVideo->bus, pVideo->device, pVideo->func); - } - else - { - sprintf(Identifier, - "Shared 8514/A in PCI slot %d:%d:%d", - pVideo->bus, pVideo->device, pVideo->func); - xf86MsgVerb(X_INFO, 3, - ATI_NAME ": %s detected.\n", Identifier); - if (pATI->Adapter != ATI_ADAPTER_MACH32) - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach32 in slot %d:%d:%d" - " could only be detected as an %s!\n", - pVideo->bus, pVideo->device, pVideo->func, - ATIAdapterNames[pATI->Adapter]); - - AddAdapter(pATI); - pATI->SharedAccelerator = TRUE; - - if ((pATI->VGAAdapter != ATI_ADAPTER_NONE) || - (pATI->Coprocessor != ATI_CHIP_NONE)) - ATIFindVGA(pVideo, &pVGA, &pATI, p8514, - ProbeFlags); - } - - xf86SetPciVideo(NULL, NONE); - break; - } - } - - /* Next, look for sparse I/O Mach64's */ - for (i = 0; (pVideo = xf86PciVideoInfo[i++]); ) - { - if ((pVideo->vendor != PCI_VENDOR_ATI) || - (pVideo->chipType == PCI_CHIP_MACH32) || - pVideo->size[1]) - continue; - - pPCI = pVideo->thisCard; - PciReg = pciReadLong(pPCI->tag, PCI_REG_USERCONFIG); - j = PciReg & 0x03U; - if (j == 0x03U) - { - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach64 in slot %d:%d:%d cannot be" - " enabled\n because it has neither a block, nor a" - " sparse, I/O base.\n", - pVideo->bus, pVideo->device, pVideo->func); - } - else switch(ATICheckSparseIOBases(pVideo, ProbeFlags, - Mach64SparseIOBases[j], 4, TRUE)) - { - case 0: - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach64 in slot %d:%d:%d will not" - " be enabled\n because it conflicts with another" - " non-video PCI device.\n", - pVideo->bus, pVideo->device, pVideo->func); - break; - - case Detected8514A: - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach64 in slot %d:%d:%d will not" - " be enabled\n because it conflicts with an %s.\n", - pVideo->bus, pVideo->device, pVideo->func, - ATIAdapterNames[p8514->Adapter]); - break; - - case DetectedMach64: - pATI = pMach64[j]; - if ((pATI->BusType >= ATI_BUS_PCI) && !pATI->PCIInfo) - pATI->PCIInfo = pVideo; - else - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach64 in slot %d:%d:%d will" - " not be enabled\n because it conflicts with" - " another %s Mach64 at sparse I/O base" - " 0x%04lX.\n", - pVideo->bus, pVideo->device, pVideo->func, - ATIBusNames[pATI->BusType], - Mach64SparseIOBases[j]); - break; - - default: /* Must be DoProbe */ - if (!xf86CheckPciSlot(pVideo->bus, - pVideo->device, - pVideo->func)) - continue; - - /* Possibly fix block I/O indicator */ - if (PciReg & 0x00000004U) - pciWriteLong(pPCI->tag, PCI_REG_USERCONFIG, - PciReg & ~0x00000004U); - - xf86SetPciVideo(pVideo, MEM_IO); - - Chip = ATIChipID(pVideo->chipType, pVideo->chipRev); - pATI = ATIMach64Probe(pVideo, Mach64SparseIOBases[j], - SPARSE_IO, Chip); - if (!pATI) - { - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach64 in slot %d:%d:%d could" - " not be detected!\n", - pVideo->bus, pVideo->device, pVideo->func); - } - else - { - sprintf(Identifier, - "Shared PCI Mach64 in slot %d:%d:%d", - pVideo->bus, pVideo->device, pVideo->func); - xf86MsgVerb(X_INFO, 3, - ATI_NAME ": %s with sparse PIO base 0x%04lX" - " detected.\n", Identifier, - Mach64SparseIOBases[j]); - AddAdapter(pATI); - pATI->SharedAccelerator = TRUE; - pATI->PCIInfo = pVideo; - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - ATIFindVGA(pVideo, &pVGA, &pATI, p8514, - ProbeFlags); - } - - xf86SetPciVideo(NULL, NONE); - break; - } - } - -#else /* AVOID_CPIO */ - - for (i = 0; (pVideo = xf86PciVideoInfo[i++]); ) - { - if ((pVideo->vendor != PCI_VENDOR_ATI) || - (pVideo->chipType == PCI_CHIP_MACH32) || - pVideo->size[1]) - continue; - - /* Check if this one has already been detected */ - for (j = 0; j < nATIPtr; j++) - { - pATI = ATIPtrs[j]; - if (pATI->PCIInfo == pVideo) - goto SkipThisSlot; - } - - if (!xf86CheckPciSlot(pVideo->bus, - pVideo->device, - pVideo->func)) - continue; - - xf86SetPciVideo(pVideo, MEM_IO); - - Chip = ATIChipID(pVideo->chipType, pVideo->chipRev); - - /* The adapter's CPIO base is of little concern here */ - pATI = ATIMach64Probe(pVideo, 0, SPARSE_IO, Chip); - if (pATI) - { - sprintf(Identifier, "Shared PCI Mach64 in slot %d:%d:%d", - pVideo->bus, pVideo->device, pVideo->func); - xf86MsgVerb(X_INFO, 3, - ATI_NAME ": %s with Block 0 base 0x%08X detected.\n", - Identifier, pATI->Block0Base); - AddAdapter(pATI); - pATI->SharedAccelerator = TRUE; - pATI->PCIInfo = pVideo; - } - else - { - xf86Msg(X_WARNING, - ATI_NAME ": PCI Mach64 in slot %d:%d:%d could not be" - " detected!\n", - pVideo->bus, pVideo->device, pVideo->func); - } - - xf86SetPciVideo(NULL, NONE); - - SkipThisSlot:; - } - -#endif /* AVOID_CPIO */ - - } - - /* Lastly, look for block I/O devices */ - for (i = 0; (pVideo = xf86PciVideoInfo[i++]); ) - { - if ((pVideo->vendor != PCI_VENDOR_ATI) || - (pVideo->chipType == PCI_CHIP_MACH32) || - !pVideo->size[1]) - continue; - - /* Check for Rage128's, Radeon's and later adapters */ - Chip = ATIChipID(pVideo->chipType, pVideo->chipRev); - if (Chip > ATI_CHIP_Mach64) - { - switch (Chip) - { - case ATI_CHIP_RAGE128GL: - case ATI_CHIP_RAGE128VR: - case ATI_CHIP_RAGE128PROULTRA: - case ATI_CHIP_RAGE128PROGL: - case ATI_CHIP_RAGE128PROVR: - case ATI_CHIP_RAGE128MOBILITY3: - case ATI_CHIP_RAGE128MOBILITY4: - DoRage128 = TRUE; - continue; - - case ATI_CHIP_RADEON: - case ATI_CHIP_RADEONVE: - case ATI_CHIP_RADEONMOBILITY6: - case ATI_CHIP_RS100: - case ATI_CHIP_RS200: - case ATI_CHIP_RS250: - case ATI_CHIP_RADEONMOBILITY7: - case ATI_CHIP_R200: - case ATI_CHIP_RV200: - case ATI_CHIP_RV250: - case ATI_CHIP_RADEONMOBILITY9: - case ATI_CHIP_RS300: - case ATI_CHIP_RV280: - case ATI_CHIP_RADEONMOBILITY9PLUS: - case ATI_CHIP_R300: - case ATI_CHIP_RV350: - case ATI_CHIP_R350: - case ATI_CHIP_R360: - DoRadeon = TRUE; - continue; - - case ATI_CHIP_HDTV: - default: - continue; - } - } - - if (!nATIGDev) - continue; - - /* Check if this one has already been detected */ - for (j = 0; j < nATIPtr; j++) - { - pATI = ATIPtrs[j]; - if (pATI->CPIOBase == pVideo->ioBase[1]) - goto SetPCIInfo; - } - - if (!xf86CheckPciSlot(pVideo->bus, pVideo->device, pVideo->func)) - continue; - - /* Probe for it */ - xf86SetPciVideo(pVideo, MEM_IO); - - pATI = ATIMach64Probe(pVideo, pVideo->ioBase[1], BLOCK_IO, Chip); - if (pATI) - { - sprintf(Identifier, "Shared PCI/AGP Mach64 in slot %d:%d:%d", - pVideo->bus, pVideo->device, pVideo->func); - xf86MsgVerb(X_INFO, 3, ATI_NAME ": %s detected.\n", - Identifier); - AddAdapter(pATI); - pATI->SharedAccelerator = TRUE; - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - ATIFindVGA(pVideo, &pVGA, &pATI, p8514, ProbeFlags); - -#endif /* AVOID_CPIO */ - - } - - xf86SetPciVideo(NULL, NONE); - - if (!pATI) - { - xf86Msg(X_WARNING, - ATI_NAME ": PCI/AGP Mach64 in slot %d:%d:%d could not be" - " detected!\n", pVideo->bus, pVideo->device, pVideo->func); - continue; - } - - SetPCIInfo: - pATI->PCIInfo = pVideo; - } - } - -#ifndef AVOID_CPIO - - /* - * At this point, if there's a non-shareable VGA with its own framebuffer, - * find out if it's an ATI VGA Wonder. - */ - do - { - if (!nATIGDev || !pVGA || (pVGA->VGAAdapter > ATI_ADAPTER_VGA)) - break; - - /* If it has not been assigned to a coprocessor, keep track of it */ - if (pVGA->Coprocessor == ATI_CHIP_NONE) - AddAdapter(pVGA); - - /* - * A VGA should have installed its int 10 vector. Use that to find the - * VGA BIOS. If this fails, scan all legacy BIOS segments, in 512-byte - * increments. - */ - if (xf86ReadBIOS(0U, 0x42U, BIOS, 2) != 2) - goto NoVGAWonder; - - pATI = NULL; - BIOSBase = 0; - if (!(BIOS[0] & 0x1FU)) /* Otherwise there's no 512-byte alignment */ - BIOSBase = ((BIOS[1] << 8) | BIOS[0]) << 4; - - /* Look for its BIOS */ - for(; ; BIOSBase += 0x00000200U) - { - if (!BIOSBase) - goto SkipBiosSegment; - - if (BIOSBase >= 0x000F8000U) - goto NoVGAWonder; - - /* Skip over those that are already known */ - for (i = 0; i < nATIPtr; i++) - if (ATIPtrs[i]->BIOSBase == BIOSBase) - goto SkipBiosSegment; - - /* Get first 80 bytes of video BIOS */ - if (xf86ReadBIOS(BIOSBase, 0, BIOS, SizeOf(BIOS)) != - SizeOf(BIOS)) - goto NoVGAWonder; - - if ((BIOS[0x00U] != 0x55U) || (BIOS[0x01U] != 0xAAU)) - goto SkipBiosSegment; - - if ((BIOS[0x1EU] == 'I') && - (BIOS[0x1FU] == 'B') && - (BIOS[0x20U] == 'M')) - break; - - /* XXX Should PCI BIOS signature be checked for here ? */ - if ((BIOS[0x20U] == 'P') && - (BIOS[0x21U] == 'C') && - (BIOS[0x22U] == 'I')) - break; - - SkipBiosSegment: - if (pATI) - continue; - - pATI = pVGA; - BIOSBase = 0x000C0000U - 0x00000200U; - } - - pVGA->BIOSBase = BIOSBase; - - /* Look for the ATI signature string */ - if (memcmp(BIOS + BIOSSignature, ATISignature, SignatureSize)) - break; - - if (BIOS[0x40U] != '3') - break; - - switch (BIOS[0x41U]) - { - case '1': - /* This is a Mach8 or VGA Wonder adapter of some kind */ - if ((BIOS[0x43U] >= '1') && (BIOS[0x43U] <= '6')) - pVGA->Chip = BIOS[0x43U] - ('1' - ATI_CHIP_18800); - - switch (BIOS[0x43U]) - { - case '1': /* ATI_CHIP_18800 */ - pVGA->VGAOffset = 0xB0U; - pVGA->VGAAdapter = ATI_ADAPTER_V3; - break; - - case '2': /* ATI_CHIP_18800_1 */ - pVGA->VGAOffset = 0xB0U; - if (BIOS[0x42U] & 0x10U) - pVGA->VGAAdapter = ATI_ADAPTER_V5; - else - pVGA->VGAAdapter = ATI_ADAPTER_V4; - break; - - case '3': /* ATI_CHIP_28800_2 */ - case '4': /* ATI_CHIP_28800_4 */ - case '5': /* ATI_CHIP_28800_5 */ - case '6': /* ATI_CHIP_28800_6 */ - pVGA->VGAOffset = 0xA0U; - if (BIOS[0x44U] & 0x80U) - pVGA->VGAAdapter = ATI_ADAPTER_XL; - else - pVGA->VGAAdapter = ATI_ADAPTER_PLUS; - break; - - case 'a': /* A crippled Mach32 */ - case 'b': - case 'c': - pVGA->VGAOffset = 0x80U; - pVGA->VGAAdapter = ATI_ADAPTER_NONISA; - ATIMach32ChipID(pVGA); - ProbeWaitIdleEmpty(); - if (inw(SUBSYS_STAT) != (CARD16)(-1)) - pVGA->ChipHasSUBSYS_CNTL = TRUE; - break; -#if 0 - case ' ': /* A crippled Mach64 */ - pVGA->VGAOffset = 0x80U; - pVGA->VGAAdapter = ATI_ADAPTER_NONISA; - ATIMach64ChipID(pVGA, 0); - break; -#endif - default: - break; - } - - if (pVGA->VGAAdapter == ATI_ADAPTER_NONE) - break; - - /* Set VGA Wonder I/O port */ - pVGA->CPIO_VGAWonder = BIOSWord(0x10U) & SPARSE_IO_PORT; - if (!pVGA->CPIO_VGAWonder) - pVGA->CPIO_VGAWonder = 0x01CEU; - - ATIVGAWonderProbe(NULL, pVGA, p8514, ProbeFlags); - break; -#if 0 - case '2': - pVGA->VGAOffset = 0xB0U; /* Presumably */ - pVGA->VGAAdapter = ATI_ADAPTER_EGA_PLUS; - break; - - case '3': - pVGA->VGAOffset = 0xB0U; /* Presumably */ - pVGA->VGAAdapter = ATI_ADAPTER_BASIC; - break; - - case '?': /* A crippled Mach64 */ - pVGA->VGAAdapter = ATI_ADAPTER_NONISA; - ATIMach64ChipID(pVGA, 0); - break; -#endif - default: - break; - } - - if (pVGA->Adapter <= ATI_ADAPTER_VGA) - pVGA->Adapter = pVGA->VGAAdapter; - -NoVGAWonder:; - } while (0); - -#endif /* AVOID_CPIO */ - - /* - * Re-order list of detected devices so that the primary device is before - * any other PCI device. - */ - for (i = 0; i < nATIPtr; i++) - { - if (!ATIPtrs[i]->PCIInfo) - continue; - - for (j = i; j < nATIPtr; j++) - { - pATI = ATIPtrs[j]; - if (!xf86IsPrimaryPci(pATI->PCIInfo)) - continue; - - for (; j > i; j--) - ATIPtrs[j] = ATIPtrs[j - 1]; - ATIPtrs[j] = pATI; - break; - } - - break; - } - - if (flags & PROBE_DETECT) - { - /* - * No XF86Config information available, so use the default Chipset of - * "ati", and as many device sections as there are adapters. - */ - for (i = 0; i < nATIPtr; i++) - { - pATI = ATIPtrs[i]; - -#ifndef AVOID_CPIO - - if ((pATI->Adapter != ATI_ADAPTER_VGA) && - ((pATI->Adapter != ATI_ADAPTER_8514A) || - ((pATI->VGAAdapter != ATI_ADAPTER_VGA) && - (pATI->VGAAdapter != ATI_ADAPTER_NONE)))) - -#endif /* AVOID_CPIO */ - - { - ProbeSuccess = TRUE; - pGDev = xf86AddDeviceToConfigure(ATI_DRIVER_NAME, - pATI->PCIInfo, ATI_CHIPSET_ATI); - if (pGDev) - { - /* Fill in additional information */ - pGDev->vendor = ATI_NAME; - pGDev->chipset = (char *)ATIChipsetNames[ATI_CHIPSET_ATI]; - if (!pATI->PCIInfo) - pGDev->busID = NULL; - } - } - - xfree(pATI); - } - } - else - { - /* - * Assign detected devices to XF86Config Device sections. This is done - * by comparing certain Device section specifications against the - * corresponding adapter information. Begin with those specifications - * that are independent of the adapter's bus location. - */ - for (i = 0, pATIGDev = ATIGDevs; i < nATIGDev; i++, pATIGDev++) - { - pGDev = pATIGDev->pGDev; - - for (j = 0; j < nATIPtr; j++) - { - pATI = ATIPtrs[j]; - - /* - * First check the Chipset specification. The placement of - * "break" and "continue" statements here is carefully chosen - * to produce the intended behaviour for each Chipset value. - */ - switch (pATIGDev->Chipset) - { - case ATI_CHIPSET_ATI: - -#ifndef AVOID_CPIO - - if (pATI->Adapter == ATI_ADAPTER_VGA) - continue; - if (pATI->Adapter != ATI_ADAPTER_8514A) - break; - /* Fall through */ - - case ATI_CHIPSET_ATIVGA: - if (pATI->VGAAdapter == ATI_ADAPTER_VGA) - continue; - /* Fall through */ - - case ATI_CHIPSET_IBMVGA: - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - continue; - break; - - case ATI_CHIPSET_VGAWONDER: - if (!pATI->CPIO_VGAWonder) - continue; - break; - - case ATI_CHIPSET_IBM8514: - if (pATI->Adapter == ATI_ADAPTER_8514A) - break; - /* Fall through */ - - case ATI_CHIPSET_MACH8: - if (pATI->Adapter == ATI_ADAPTER_MACH8) - break; - /* Fall through */ - - case ATI_CHIPSET_MACH32: - if (pATI->Adapter == ATI_ADAPTER_MACH32) - break; - continue; - -#endif /* AVOID_CPIO */ - - case ATI_CHIPSET_MACH64: - if (pATI->Adapter == ATI_ADAPTER_MACH64) - break; - continue; - - default: - continue; - } - - /* - * The ChipID and ChipRev specifications are compared next. - * First, require these to be unspecified for anything other - * than Mach32 or Mach64 adapters. ChipRev is also required to - * be unspecified for Mach32's. ChipID is optional for - * Mach32's, and both specifications are optional for Mach64's. - * Lastly, allow both specifications to override their detected - * value in the case of Mach64 adapters whose ChipID is - * unrecognised. - */ - pVideo = pATI->PCIInfo; - if (pGDev->chipID >= 0) - { - if ((pATI->ChipType != pGDev->chipID) && - (!pVideo || (pGDev->chipID != pVideo->chipType))) - { - if ((pATI->Adapter != ATI_ADAPTER_MACH64) || - (pATI->Chip != ATI_CHIP_Mach64)) - continue; - - Chip = ATIChipID(pGDev->chipID, 0); - if ((Chip <= ATI_CHIP_264GTB) || - (Chip == ATI_CHIP_Mach64)) - continue; - } - if ((pGDev->chipRev >= 0) && - (pATI->ChipRev != pGDev->chipRev) && - (!pVideo || (pGDev->chipRev != pVideo->chipRev) || - (pGDev->chipID != pVideo->chipType))) - { - if (pATI->Chip < ATI_CHIP_264CT) - continue; - - if (pATI->Chip != ATI_CHIP_Mach64) - { - /* - * There are two foundry codes for UMC. Some - * adapters will advertise one in CONFIG_CHIP_ID - * and the other in PCI configuration space. For - * matching purposes, make both codes compare - * equal. - */ -# define UMC_IGNORE \ - (ATI_FOUNDRY_UMC ^ ATI_FOUNDRY_UMCA) -# define UMC_NOCARE \ - GetBits(SetBits(UMC_IGNORE, CFG_CHIP_FOUNDRY), \ - CFG_CHIP_REV) - - if ((pATI->ChipRev ^ pGDev->chipRev) & ~UMC_NOCARE) - continue; - - if ((pATI->ChipFoundry != ATI_FOUNDRY_UMC) && - (pATI->ChipFoundry != ATI_FOUNDRY_UMCA)) - continue; - - k = GetBits(pGDev->chipRev, - GetBits(CFG_CHIP_FOUNDRY, CFG_CHIP_REV)); - if ((k != ATI_FOUNDRY_UMC) && - (k != ATI_FOUNDRY_UMCA)) - continue; - } - } - } - - /* - * IOBase is next. This is the first specification that is - * potentially dependent on bus location. It is only allowed - * for Mach64 adapters, and is optional. - */ - if (pGDev->IOBase && (pATI->CPIOBase != pGDev->IOBase)) - continue; - - /* - * Compare BusID's. This specification is only allowed for PCI - * Mach32's or Mach64's and is optional. - */ - if (pGDev->busID && pGDev->busID[0]) - { - pVideo = pATI->PCIInfo; - -#ifndef AVOID_CPIO - - if (!pVideo) - continue; - -#endif /* AVOID_CPIO */ - - if (!xf86ComparePciBusString(pGDev->busID, - pVideo->bus, pVideo->device, pVideo->func)) - continue; - } - - /* - * Ensure no two adapters are assigned to the same XF86Config - * Device section. - */ - if (pATIGDev->iATIPtr) - { - if (pATIGDev->iATIPtr < 0) - break; - - xf86Msg(X_ERROR, - ATI_NAME ": XF86Config Device section \"%s\" may not" - " be assigned to more than one adapter.\n", - pGDev->identifier); - pATIGDev->iATIPtr = -1; - break; - } - - /* Assign adapter */ - pATIGDev->iATIPtr = j + 1; - - /* - * For compatibility with previous releases, assign the first - * applicable adapter if there is only one Device section. - */ - if (nATIGDev == 1) - break; - } - } - - /* - * Ensure no two XF86Config Device sections are assigned to the same - * adapter. Then, generate screens for any that are left. - */ - for (i = 0, pATIGDev = ATIGDevs; i < nATIGDev; i++, pATIGDev++) - { - pGDev = pATIGDev->pGDev; - - j = pATIGDev->iATIPtr; - if (j <= 0) - continue; - - for (k = i; ++k < nATIGDev; ) - { - if (j == ATIGDevs[k].iATIPtr) - { - xf86Msg(X_ERROR, - ATI_NAME ": XF86Config Device sections \"%s\" and" - " \"%s\" may not be assigned to the same adapter.\n", - pGDev->identifier, ATIGDevs[k].pGDev->identifier); - pATIGDev->iATIPtr = ATIGDevs[k].iATIPtr = -1; - } - } - - j = ATIGDevs[i].iATIPtr; - if (j <= 0) - continue; - - pATI = ATIPtrs[j - 1]; - - xf86MsgVerb(X_INFO, 3, - ATI_NAME ": %s assigned to %sactive \"Device\" section" - " \"%s\".\n", - Identifier, pGDev->active ? "" : "in", pGDev->identifier); - - /* - * Attach adapter to XF86Config Device section and register its - * resources. - */ - if (ATIClaimBusSlot(pDriver, pATIGDev->Chipset, - pGDev, pGDev->active, pATI) < 0) - { - xf86Msg(X_ERROR, - ATI_NAME ": Could not claim bus slot for %s.\n", - Identifier); - continue; - } - - if (!pGDev->active) - continue; - - /* Allocate screen */ - pScreenInfo = xf86AllocateScreen(pDriver, 0); - -#ifdef XFree86LOADER - - if (!xf86LoadSubModule(pScreenInfo, "atimisc")) - { - xf86Msg(X_ERROR, - ATI_NAME ": Failed to load \"atimisc\" module.\n"); - xf86DeleteScreen(pScreenInfo->scrnIndex, 0); - continue; - } - - xf86LoaderReqSymLists(ATISymbols, NULL); - -#endif - - /* Attach device to screen */ - xf86AddEntityToScreen(pScreenInfo, pATI->iEntity); - - ATIPtrs[j - 1] = NULL; - - /* Fill in probe data */ - pScreenInfo->driverVersion = ATI_VERSION_CURRENT; - pScreenInfo->driverName = ATI_DRIVER_NAME; - pScreenInfo->name = ATI_NAME; - pScreenInfo->Probe = ATIProbe; - pScreenInfo->PreInit = ATIPreInit; - pScreenInfo->ScreenInit = ATIScreenInit; - pScreenInfo->SwitchMode = ATISwitchMode; - pScreenInfo->AdjustFrame = ATIAdjustFrame; - pScreenInfo->EnterVT = ATIEnterVT; - pScreenInfo->LeaveVT = ATILeaveVT; - pScreenInfo->FreeScreen = ATIFreeScreen; - pScreenInfo->ValidMode = ATIValidMode; - - pScreenInfo->driverPrivate = pATI; - - pATI->Chipset = pATIGDev->Chipset; - - ProbeSuccess = TRUE; - } - - /* Deal with unassigned adapters */ - for (i = 0; i < nATIPtr; i++) - { - if (!(pATI = ATIPtrs[i])) - continue; - -#ifndef AVOID_CPIO - - if (pATI->Adapter > ATI_ADAPTER_VGA) - -#endif /* AVOID_CPIO */ - - { - if (pATI->iEntity < 0) - (void)ATIClaimBusSlot(pDriver, 0, NULL, FALSE, pATI); - } - - xfree(pATI); - } - - xfree(ATIGDevs); - } - - xfree(ATIPtrs); - - /* Call Rage 128 driver probe */ - if (DoRage128 && R128Probe(pDriver, flags)) - ProbeSuccess = TRUE; - - /* Call Radeon driver probe */ - if (DoRadeon && RADEONProbe(pDriver, flags)) - ProbeSuccess = TRUE; - - return ProbeSuccess; -} diff --git a/src/atiprobe.h b/src/atiprobe.h deleted file mode 100644 index 6f3d8554..00000000 --- a/src/atiprobe.h +++ /dev/null @@ -1,33 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiprobe.h,v 1.8 2003/01/01 19:16:33 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIPROBE_H___ -#define ___ATIPROBE_H___ 1 - -#include "atiproto.h" - -#include "xf86str.h" - -extern Bool ATIProbe FunctionPrototype((DriverPtr, int)); - -#endif /* ___ATIPROBE_H___ */ diff --git a/src/atiregs.h b/src/atiregs.h deleted file mode 100644 index b0c3d847..00000000 --- a/src/atiregs.h +++ /dev/null @@ -1,2741 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiregs.h,v 1.24 2003/04/23 21:51:30 tsi Exp $ */ -/* - * Copyright 1994 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * Acknowledgements: - * Jake Richter, Panacea Inc., Londonderry, New Hampshire, U.S.A. - * Kevin E. Martin, martin@cs.unc.edu - * Tiago Gons, tiago@comosjn.hobby.nl - * Rickard E. Faith, faith@cs.unc.edu - * Scott Laird, lair@kimbark.uchicago.edu - * - * The intent here is to list all I/O ports for VGA (and its predecessors), - * ATI VGA Wonder, 8514/A, ATI Mach8, ATI Mach32 and ATI Mach64 video adapters, - * not just the ones in use by the ATI driver. - */ - -#ifndef ___ATIREGS_H___ -#define ___ATIREGS_H___ 1 - -#include "atiutil.h" - -/* I/O decoding definitions */ -#define SPARSE_IO_BASE 0x03fcu -#define SPARSE_IO_SELECT 0xfc00u - -#define BLOCK_IO_BASE 0xff00u -#define BLOCK_IO_SELECT 0x00fcu - -#define MM_IO_SELECT 0x03fcu -#define BLOCK_SELECT 0x0400u -#define DWORD_SELECT (BLOCK_SELECT | MM_IO_SELECT) - -#define IO_BYTE_SELECT 0x0003u - -#define SPARSE_IO_PORT (SPARSE_IO_BASE | IO_BYTE_SELECT) -#define BLOCK_IO_PORT (BLOCK_IO_BASE | IO_BYTE_SELECT) - -#define IOPortTag(_SparseIOSelect, _BlockIOSelect) \ - (SetBits(_SparseIOSelect, SPARSE_IO_SELECT) | \ - SetBits(_BlockIOSelect, DWORD_SELECT)) -#define SparseIOTag(_IOSelect) IOPortTag(_IOSelect, 0) -#define BlockIOTag(_IOSelect) IOPortTag(0, _IOSelect) - -/* MDA/[M]CGA/EGA/VGA I/O ports */ -#define GENVS 0x0102u /* Write (and Read on uC only) */ - -#define R_GENLPS 0x03b9u /* Read */ - -#define GENHP 0x03bfu - -#define ATTRX 0x03c0u -#define ATTRD 0x03c1u -#define GENS0 0x03c2u /* Read */ -#define GENMO 0x03c2u /* Write */ -#define GENENB 0x03c3u /* Read */ -#define SEQX 0x03c4u -#define SEQD 0x03c5u -#define VGA_DAC_MASK 0x03c6u -#define VGA_DAC_READ 0x03c7u -#define VGA_DAC_WRITE 0x03c8u -#define VGA_DAC_DATA 0x03c9u -#define R_GENFC 0x03cau /* Read */ -/* ? 0x03cbu */ -#define R_GENMO 0x03ccu /* Read */ -/* ? 0x03cdu */ -#define GRAX 0x03ceu -#define GRAD 0x03cfu - -#define GENB 0x03d9u - -#define GENLPS 0x03dcu /* Write */ -#define KCX 0x03ddu -#define KCD 0x03deu - -#define GENENA 0x46e8u /* Write */ - -/* I/O port base numbers */ -#define MonochromeIOBase 0x03b0u -#define ColourIOBase 0x03d0u - -/* Other MDA/[M]CGA/EGA/VGA I/O ports */ -/* ?(_IOBase) ((_IOBase) + 0x00u) */ /* CRTX synonym */ -/* ?(_IOBase) ((_IOBase) + 0x01u) */ /* CRTD synonym */ -/* ?(_IOBase) ((_IOBase) + 0x02u) */ /* CRTX synonym */ -/* ?(_IOBase) ((_IOBase) + 0x03u) */ /* CRTD synonym */ -#define CRTX(_IOBase) ((_IOBase) + 0x04u) -#define CRTD(_IOBase) ((_IOBase) + 0x05u) -/* ?(_IOBase) ((_IOBase) + 0x06u) */ -/* ?(_IOBase) ((_IOBase) + 0x07u) */ -#define GENMC(_IOBase) ((_IOBase) + 0x08u) -/* ?(_IOBase) ((_IOBase) + 0x09u) */ /* R_GENLPS/GENB */ -#define GENS1(_IOBase) ((_IOBase) + 0x0au) /* Read */ -#define GENFC(_IOBase) ((_IOBase) + 0x0au) /* Write */ -#define GENLPC(_IOBase) ((_IOBase) + 0x0bu) -/* ?(_IOBase) ((_IOBase) + 0x0cu) */ /* /GENLPS */ -/* ?(_IOBase) ((_IOBase) + 0x0du) */ /* /KCX */ -/* ?(_IOBase) ((_IOBase) + 0x0eu) */ /* /KCD */ -/* ?(_IOBase) ((_IOBase) + 0x0fu) */ /* GENHP/ */ - -/* 8514/A VESA approved register definitions */ -#define DISP_STAT 0x02e8u /* Read */ -#define SENSE 0x0001u /* Presumably belong here */ -#define VBLANK 0x0002u -#define HORTOG 0x0004u -#define H_TOTAL 0x02e8u /* Write */ -#define IBM_DAC_MASK 0x02eau -#define IBM_DAC_READ 0x02ebu -#define IBM_DAC_WRITE 0x02ecu -#define IBM_DAC_DATA 0x02edu -#define H_DISP 0x06e8u /* Write */ -#define H_SYNC_STRT 0x0ae8u /* Write */ -#define H_SYNC_WID 0x0ee8u /* Write */ -#define HSYNCPOL_POS 0x0000u -#define HSYNCPOL_NEG 0x0020u -#define H_POLARITY_POS HSYNCPOL_POS /* Sigh */ -#define H_POLARITY_NEG HSYNCPOL_NEG /* Sigh */ -#define V_TOTAL 0x12e8u /* Write */ -#define V_DISP 0x16e8u /* Write */ -#define V_SYNC_STRT 0x1ae8u /* Write */ -#define V_SYNC_WID 0x1ee8u /* Write */ -#define VSYNCPOL_POS 0x0000u -#define VSYNCPOL_NEG 0x0020u -#define V_POLARITY_POS VSYNCPOL_POS /* Sigh */ -#define V_POLARITY_NEG VSYNCPOL_NEG /* Sigh */ -#define DISP_CNTL 0x22e8u /* Write */ -#define ODDBNKENAB 0x0001u -#define MEMCFG_2 0x0000u -#define MEMCFG_4 0x0002u -#define MEMCFG_6 0x0004u -#define MEMCFG_8 0x0006u -#define DBLSCAN 0x0008u -#define INTERLACE 0x0010u -#define DISPEN_NC 0x0000u -#define DISPEN_ENAB 0x0020u -#define DISPEN_DISAB 0x0040u -#define R_H_TOTAL 0x26e8u /* Read */ -/* ? 0x2ae8u */ -/* ? 0x2ee8u */ -/* ? 0x32e8u */ -/* ? 0x36e8u */ -/* ? 0x3ae8u */ -/* ? 0x3ee8u */ -#define SUBSYS_STAT 0x42e8u /* Read */ -#define VBLNKFLG 0x0001u -#define PICKFLAG 0x0002u -#define INVALIDIO 0x0004u -#define GPIDLE 0x0008u -#define MONITORID_MASK 0x0070u -/* MONITORID_? 0x0000u */ -#define MONITORID_8507 0x0010u -#define MONITORID_8514 0x0020u -/* MONITORID_? 0x0030u */ -/* MONITORID_? 0x0040u */ -#define MONITORID_8503 0x0050u -#define MONITORID_8512 0x0060u -#define MONITORID_8513 0x0060u -#define MONITORID_NONE 0x0070u -#define _8PLANE 0x0080u -#define SUBSYS_CNTL 0x42e8u /* Write */ -#define RVBLNKFLG 0x0001u -#define RPICKFLAG 0x0002u -#define RINVALIDIO 0x0004u -#define RGPIDLE 0x0008u -#define IVBLNKFLG 0x0100u -#define IPICKFLAG 0x0200u -#define IINVALIDIO 0x0400u -#define IGPIDLE 0x0800u -#define CHPTEST_NC 0x0000u -#define CHPTEST_NORMAL 0x1000u -#define CHPTEST_ENAB 0x2000u -#define GPCTRL_NC 0x0000u -#define GPCTRL_ENAB 0x4000u -#define GPCTRL_RESET 0x8000u -#define ROM_PAGE_SEL 0x46e8u /* Write */ -#define ADVFUNC_CNTL 0x4ae8u /* Write */ -#define DISABPASSTHRU 0x0001u -#define CLOKSEL 0x0004u -/* ? 0x4ee8u */ -#define EXT_CONFIG_0 0x52e8u /* C & T 82C480 */ -#define EXT_CONFIG_1 0x56e8u /* C & T 82C480 */ -#define EXT_CONFIG_2 0x5ae8u /* C & T 82C480 */ -#define EXT_CONFIG_3 0x5ee8u /* C & T 82C480 */ -/* ? 0x62e8u */ -/* ? 0x66e8u */ -/* ? 0x6ae8u */ -/* ? 0x6ee8u */ -/* ? 0x72e8u */ -/* ? 0x76e8u */ -/* ? 0x7ae8u */ -/* ? 0x7ee8u */ -#define CUR_Y 0x82e8u -#define CUR_X 0x86e8u -#define DESTY_AXSTP 0x8ae8u /* Write */ -#define DESTX_DIASTP 0x8ee8u /* Write */ -#define ERR_TERM 0x92e8u -#define MAJ_AXIS_PCNT 0x96e8u /* Write */ -#define GP_STAT 0x9ae8u /* Read */ -#define GE_STAT 0x9ae8u /* Alias */ -#define DATARDY 0x0100u -#define DATA_READY DATARDY /* Alias */ -#define GPBUSY 0x0200u -#define CMD 0x9ae8u /* Write */ -#define WRTDATA 0x0001u -#define PLANAR 0x0002u -#define LASTPIX 0x0004u -#define LINETYPE 0x0008u -#define DRAW 0x0010u -#define INC_X 0x0020u -#define YMAJAXIS 0x0040u -#define INC_Y 0x0080u -#define PCDATA 0x0100u -#define _16BIT 0x0200u -#define CMD_NOP 0x0000u -#define CMD_OP_MSK 0xf000u -#define BYTSEQ 0x1000u -#define CMD_LINE 0x2000u -#define CMD_RECT 0x4000u -#define CMD_RECTV1 0x6000u -#define CMD_RECTV2 0x8000u -#define CMD_LINEAF 0xa000u -#define CMD_BITBLT 0xc000u -#define SHORT_STROKE 0x9ee8u /* Write */ -#define SSVDRAW 0x0010u -#define VECDIR_000 0x0000u -#define VECDIR_045 0x0020u -#define VECDIR_090 0x0040u -#define VECDIR_135 0x0060u -#define VECDIR_180 0x0080u -#define VECDIR_225 0x00a0u -#define VECDIR_270 0x00c0u -#define VECDIR_315 0x00e0u -#define BKGD_COLOR 0xa2e8u /* Write */ -#define FRGD_COLOR 0xa6e8u /* Write */ -#define WRT_MASK 0xaae8u /* Write */ -#define RD_MASK 0xaee8u /* Write */ -#define COLOR_CMP 0xb2e8u /* Write */ -#define BKGD_MIX 0xb6e8u /* Write */ -/* 0x001fu See MIX_* definitions below */ -#define BSS_BKGDCOL 0x0000u -#define BSS_FRGDCOL 0x0020u -#define BSS_PCDATA 0x0040u -#define BSS_BITBLT 0x0060u -#define FRGD_MIX 0xbae8u /* Write */ -/* 0x001fu See MIX_* definitions below */ -#define FSS_BKGDCOL 0x0000u -#define FSS_FRGDCOL 0x0020u -#define FSS_PCDATA 0x0040u -#define FSS_BITBLT 0x0060u -#define MULTIFUNC_CNTL 0xbee8u /* Write */ -#define MIN_AXIS_PCNT 0x0000u -#define SCISSORS_T 0x1000u -#define SCISSORS_L 0x2000u -#define SCISSORS_B 0x3000u -#define SCISSORS_R 0x4000u -#define M32_MEM_CNTL 0x5000u -#define HORCFG_4 0x0000u -#define HORCFG_5 0x0001u -#define HORCFG_8 0x0002u -#define HORCFG_10 0x0003u -#define VRTCFG_2 0x0000u -#define VRTCFG_4 0x0004u -#define VRTCFG_6 0x0008u -#define VRTCFG_8 0x000cu -#define BUFSWP 0x0010u -#define PATTERN_L 0x8000u -#define PATTERN_H 0x9000u -#define PIX_CNTL 0xa000u -#define PLANEMODE 0x0004u -#define COLCMPOP_F 0x0000u -#define COLCMPOP_T 0x0008u -#define COLCMPOP_GE 0x0010u -#define COLCMPOP_LT 0x0018u -#define COLCMPOP_NE 0x0020u -#define COLCMPOP_EQ 0x0028u -#define COLCMPOP_LE 0x0030u -#define COLCMPOP_GT 0x0038u -#define MIXSEL_FRGDMIX 0x0000u -#define MIXSEL_PATT 0x0040u -#define MIXSEL_EXPPC 0x0080u -#define MIXSEL_EXPBLT 0x00c0u -/* ? 0xc2e8u */ -/* ? 0xc6e8u */ -/* ? 0xcae8u */ -/* ? 0xcee8u */ -/* ? 0xd2e8u */ -/* ? 0xd6e8u */ -/* ? 0xdae8u */ -/* ? 0xdee8u */ -#define PIX_TRANS 0xe2e8u -/* ? 0xe6e8u */ -/* ? 0xeae8u */ -/* ? 0xeee8u */ -/* ? 0xf2e8u */ -/* ? 0xf6e8u */ -/* ? 0xfae8u */ -/* ? 0xfee8u */ - -/* ATI Mach8 & Mach32 register definitions */ -#define OVERSCAN_COLOR_8 0x02eeu /* Write */ /* Mach32 */ -#define OVERSCAN_BLUE_24 0x02efu /* Write */ /* Mach32 */ -#define OVERSCAN_GREEN_24 0x06eeu /* Write */ /* Mach32 */ -#define OVERSCAN_RED_24 0x06efu /* Write */ /* Mach32 */ -#define CURSOR_OFFSET_LO 0x0aeeu /* Write */ /* Mach32 */ -#define CURSOR_OFFSET_HI 0x0eeeu /* Write */ /* Mach32 */ -#define CONFIG_STATUS_1 0x12eeu /* Read */ -#define CLK_MODE 0x0001u /* Mach8 */ -#define BUS_16 0x0002u /* Mach8 */ -#define MC_BUS 0x0004u /* Mach8 */ -#define EEPROM_ENA 0x0008u /* Mach8 */ -#define DRAM_ENA 0x0010u /* Mach8 */ -#define MEM_INSTALLED 0x0060u /* Mach8 */ -#define ROM_ENA 0x0080u /* Mach8 */ -#define ROM_PAGE_ENA 0x0100u /* Mach8 */ -#define ROM_LOCATION 0xfe00u /* Mach8 */ -#define _8514_ONLY 0x0001u /* Mach32 */ -#define BUS_TYPE 0x000eu /* Mach32 */ -#define ISA_16_BIT 0x0000u /* Mach32 */ -#define EISA 0x0002u /* Mach32 */ -#define MICRO_C_16_BIT 0x0004u /* Mach32 */ -#define MICRO_C_8_BIT 0x0006u /* Mach32 */ -#define LOCAL_386SX 0x0008u /* Mach32 */ -#define LOCAL_386DX 0x000au /* Mach32 */ -#define LOCAL_486 0x000cu /* Mach32 */ -#define PCI 0x000eu /* Mach32 */ -#define MEM_TYPE 0x0070u /* Mach32 */ -#define CHIP_DIS 0x0080u /* Mach32 */ -#define TST_VCTR_ENA 0x0100u /* Mach32 */ -#define DACTYPE 0x0e00u /* Mach32 */ -#define MC_ADR_DECODE 0x1000u /* Mach32 */ -#define CARD_ID 0xe000u /* Mach32 */ -#define HORZ_CURSOR_POSN 0x12eeu /* Write */ /* Mach32 */ -#define CONFIG_STATUS_2 0x16eeu /* Read */ -#define SHARE_CLOCK 0x0001u /* Mach8 */ -#define HIRES_BOOT 0x0002u /* Mach8 */ -#define EPROM_16_ENA 0x0004u /* Mach8 */ -#define WRITE_PER_BIT 0x0008u /* Mach8 */ -#define FLASH_ENA 0x0010u /* Mach8 */ -#define SLOW_SEQ_EN 0x0001u /* Mach32 */ -#define MEM_ADDR_DIS 0x0002u /* Mach32 */ -#define ISA_16_ENA 0x0004u /* Mach32 */ -#define KOR_TXT_MODE_ENA 0x0008u /* Mach32 */ -#define LOCAL_BUS_SUPPORT 0x0030u /* Mach32 */ -#define LOCAL_BUS_CONFIG_2 0x0040u /* Mach32 */ -#define LOCAL_BUS_RD_DLY_ENA 0x0080u /* Mach32 */ -#define LOCAL_DAC_EN 0x0100u /* Mach32 */ -#define LOCAL_RDY_EN 0x0200u /* Mach32 */ -#define EEPROM_ADR_SEL 0x0400u /* Mach32 */ -#define GE_STRAP_SEL 0x0800u /* Mach32 */ -#define VESA_RDY 0x1000u /* Mach32 */ -#define Z4GB 0x2000u /* Mach32 */ -#define LOC2_MDRAM 0x4000u /* Mach32 */ -#define VERT_CURSOR_POSN 0x16eeu /* Write */ /* Mach32 */ -#define FIFO_TEST_DATA 0x1aeeu /* Read */ /* Mach32 */ -#define CURSOR_COLOR_0 0x1aeeu /* Write */ /* Mach32 */ -#define CURSOR_COLOR_1 0x1aefu /* Write */ /* Mach32 */ -#define HORZ_CURSOR_OFFSET 0x1eeeu /* Write */ /* Mach32 */ -#define VERT_CURSOR_OFFSET 0x1eefu /* Write */ /* Mach32 */ -#define PCI_CNTL 0x22eeu /* Mach32-PCI */ -#define CRT_PITCH 0x26eeu /* Write */ -#define CRT_OFFSET_LO 0x2aeeu /* Write */ -#define CRT_OFFSET_HI 0x2eeeu /* Write */ -#define LOCAL_CNTL 0x32eeu /* Mach32 */ -#define FIFO_OPT 0x36eeu /* Write */ /* Mach8 */ -#define MISC_OPTIONS 0x36eeu /* Mach32 */ -#define W_STATE_ENA 0x0000u /* Mach32 */ -#define HOST_8_ENA 0x0001u /* Mach32 */ -#define MEM_SIZE_ALIAS 0x000cu /* Mach32 */ -#define MEM_SIZE_512K 0x0000u /* Mach32 */ -#define MEM_SIZE_1M 0x0004u /* Mach32 */ -#define MEM_SIZE_2M 0x0008u /* Mach32 */ -#define MEM_SIZE_4M 0x000cu /* Mach32 */ -#define DISABLE_VGA 0x0010u /* Mach32 */ -#define _16_BIT_IO 0x0020u /* Mach32 */ -#define DISABLE_DAC 0x0040u /* Mach32 */ -#define DLY_LATCH_ENA 0x0080u /* Mach32 */ -#define TEST_MODE 0x0100u /* Mach32 */ -#define BLK_WR_ENA 0x0400u /* Mach32 */ -#define _64_DRAW_ENA 0x0800u /* Mach32 */ -#define FIFO_TEST_TAG 0x3aeeu /* Read */ /* Mach32 */ -#define EXT_CURSOR_COLOR_0 0x3aeeu /* Write */ /* Mach32 */ -#define EXT_CURSOR_COLOR_1 0x3eeeu /* Write */ /* Mach32 */ -#define MEM_BNDRY 0x42eeu /* Mach32 */ -#define MEM_PAGE_BNDRY 0x000fu /* Mach32 */ -#define MEM_BNDRY_ENA 0x0010u /* Mach32 */ -#define SHADOW_CTL 0x46eeu /* Write */ -#define CLOCK_SEL 0x4aeeu -/* DISABPASSTHRU 0x0001u See ADVFUNC_CNTL */ -#define VFIFO_DEPTH_1 0x0100u /* Mach32 */ -#define VFIFO_DEPTH_2 0x0200u /* Mach32 */ -#define VFIFO_DEPTH_3 0x0300u /* Mach32 */ -#define VFIFO_DEPTH_4 0x0400u /* Mach32 */ -#define VFIFO_DEPTH_5 0x0500u /* Mach32 */ -#define VFIFO_DEPTH_6 0x0600u /* Mach32 */ -#define VFIFO_DEPTH_7 0x0700u /* Mach32 */ -#define VFIFO_DEPTH_8 0x0800u /* Mach32 */ -#define VFIFO_DEPTH_9 0x0900u /* Mach32 */ -#define VFIFO_DEPTH_A 0x0a00u /* Mach32 */ -#define VFIFO_DEPTH_B 0x0b00u /* Mach32 */ -#define VFIFO_DEPTH_C 0x0c00u /* Mach32 */ -#define VFIFO_DEPTH_D 0x0d00u /* Mach32 */ -#define VFIFO_DEPTH_E 0x0e00u /* Mach32 */ -#define VFIFO_DEPTH_F 0x0f00u /* Mach32 */ -#define COMPOSITE_SYNC 0x1000u -/* ? 0x4eeeu */ -#define ROM_ADDR_1 0x52eeu -#define BIOS_BASE_SEGMENT 0x007fu /* Mach32 */ -/* ? 0xff80u */ /* Mach32 */ -#define ROM_ADDR_2 0x56eeu /* Sick ... */ -#define SHADOW_SET 0x5aeeu /* Write */ -#define MEM_CFG 0x5eeeu /* Mach32 */ -#define MEM_APERT_SEL 0x0003u /* Mach32 */ -#define MEM_APERT_PAGE 0x000cu /* Mach32 */ -#define MEM_APERT_LOC 0xfff0u /* Mach32 */ -#define EXT_GE_STATUS 0x62eeu /* Read */ /* Mach32 */ -#define HORZ_OVERSCAN 0x62eeu /* Write */ /* Mach32 */ -#define VERT_OVERSCAN 0x66eeu /* Write */ /* Mach32 */ -#define MAX_WAITSTATES 0x6aeeu -#define GE_OFFSET_LO 0x6eeeu /* Write */ -#define BOUNDS_LEFT 0x72eeu /* Read */ -#define GE_OFFSET_HI 0x72eeu /* Write */ -#define BOUNDS_TOP 0x76eeu /* Read */ -#define GE_PITCH 0x76eeu /* Write */ -#define BOUNDS_RIGHT 0x7aeeu /* Read */ -#define EXT_GE_CONFIG 0x7aeeu /* Write */ /* Mach32 */ -#define MONITOR_ALIAS 0x0007u /* Mach32 */ -/* MONITOR_? 0x0000u */ /* Mach32 */ -#define MONITOR_8507 0x0001u /* Mach32 */ -#define MONITOR_8514 0x0002u /* Mach32 */ -/* MONITOR_? 0x0003u */ /* Mach32 */ -/* MONITOR_? 0x0004u */ /* Mach32 */ -#define MONITOR_8503 0x0005u /* Mach32 */ -#define MONITOR_8512 0x0006u /* Mach32 */ -#define MONITOR_8513 0x0006u /* Mach32 */ -#define MONITOR_NONE 0x0007u /* Mach32 */ -#define ALIAS_ENA 0x0008u /* Mach32 */ -#define PIXEL_WIDTH_4 0x0000u /* Mach32 */ -#define PIXEL_WIDTH_8 0x0010u /* Mach32 */ -#define PIXEL_WIDTH_16 0x0020u /* Mach32 */ -#define PIXEL_WIDTH_24 0x0030u /* Mach32 */ -#define RGB16_555 0x0000u /* Mach32 */ -#define RGB16_565 0x0040u /* Mach32 */ -#define RGB16_655 0x0080u /* Mach32 */ -#define RGB16_664 0x00c0u /* Mach32 */ -#define MULTIPLEX_PIXELS 0x0100u /* Mach32 */ -#define RGB24 0x0000u /* Mach32 */ -#define RGBx24 0x0200u /* Mach32 */ -#define BGR24 0x0400u /* Mach32 */ -#define xBGR24 0x0600u /* Mach32 */ -#define DAC_8_BIT_EN 0x4000u /* Mach32 */ -#define ORDER_16BPP_565 RGB16_565 /* Mach32 */ -#define BOUNDS_BOTTOM 0x7eeeu /* Read */ -#define MISC_CNTL 0x7eeeu /* Write */ /* Mach32 */ -#define PATT_DATA_INDEX 0x82eeu -/* ? 0x86eeu */ -/* ? 0x8aeeu */ -#define R_EXT_GE_CONFIG 0x8eeeu /* Read */ /* Mach32 */ -#define PATT_DATA 0x8eeeu /* Write */ -#define R_MISC_CNTL 0x92eeu /* Read */ /* Mach32 */ -#define BRES_COUNT 0x96eeu -#define EXT_FIFO_STATUS 0x9aeeu /* Read */ -#define LINEDRAW_INDEX 0x9aeeu /* Write */ -/* ? 0x9eeeu */ -#define LINEDRAW_OPT 0xa2eeu -#define BOUNDS_RESET 0x0100u -#define CLIP_MODE_0 0x0000u /* Clip exception disabled */ -#define CLIP_MODE_1 0x0200u /* Line segments */ -#define CLIP_MODE_2 0x0400u /* Polygon boundary lines */ -#define CLIP_MODE_3 0x0600u /* Patterned lines */ -#define DEST_X_START 0xa6eeu /* Write */ -#define DEST_X_END 0xaaeeu /* Write */ -#define DEST_Y_END 0xaeeeu /* Write */ -#define R_H_TOTAL_DISP 0xb2eeu /* Read */ /* Mach32 */ -#define SRC_X_STRT 0xb2eeu /* Write */ -#define R_H_SYNC_STRT 0xb6eeu /* Read */ /* Mach32 */ -#define ALU_BG_FN 0xb6eeu /* Write */ -#define R_H_SYNC_WID 0xbaeeu /* Read */ /* Mach32 */ -#define ALU_FG_FN 0xbaeeu /* Write */ -#define SRC_X_END 0xbeeeu /* Write */ -#define R_V_TOTAL 0xc2eeu /* Read */ -#define SRC_Y_DIR 0xc2eeu /* Write */ -#define R_V_DISP 0xc6eeu /* Read */ /* Mach32 */ -#define EXT_SHORT_STROKE 0xc6eeu /* Write */ -#define R_V_SYNC_STRT 0xcaeeu /* Read */ /* Mach32 */ -#define SCAN_X 0xcaeeu /* Write */ -#define VERT_LINE_CNTR 0xceeeu /* Read */ /* Mach32 */ -#define DP_CONFIG 0xceeeu /* Write */ -#define READ_WRITE 0x0001u -#define DATA_WIDTH 0x0200u -#define DATA_ORDER 0x1000u -#define FG_COLOR_SRC_FG 0x2000u -#define FG_COLOR_SRC_BLIT 0x6000u -#define R_V_SYNC_WID 0xd2eeu /* Read */ -#define PATT_LENGTH 0xd2eeu /* Write */ -#define PATT_INDEX 0xd6eeu /* Write */ -#define READ_SRC_X 0xdaeeu /* Read */ /* Mach32 */ -#define EXT_SCISSOR_L 0xdaeeu /* Write */ -#define READ_SRC_Y 0xdeeeu /* Read */ /* Mach32 */ -#define EXT_SCISSOR_T 0xdeeeu /* Write */ -#define EXT_SCISSOR_R 0xe2eeu /* Write */ -#define EXT_SCISSOR_B 0xe6eeu /* Write */ -/* ? 0xeaeeu */ -#define DEST_COMP_FN 0xeeeeu /* Write */ -#define DEST_COLOR_CMP_MASK 0xf2eeu /* Write */ /* Mach32 */ -/* ? 0xf6eeu */ -#define CHIP_ID 0xfaeeu /* Read */ /* Mach32 */ -#define CHIP_CODE_0 0x001fu /* Mach32 */ -#define CHIP_CODE_1 0x03e0u /* Mach32 */ -#define CHIP_CLASS 0x0c00u /* Mach32 */ -#define CHIP_REV 0xf000u /* Mach32 */ -#define LINEDRAW 0xfeeeu /* Write */ - -/* ATI Mach64 register definitions */ -#define CRTC_H_TOTAL_DISP IOPortTag(0x00u, 0x00u) -#define CRTC_H_TOTAL 0x000001fful -/* ? 0x0000fe00ul */ -#define CRTC_H_DISP 0x01ff0000ul -/* ? 0xfe000000ul */ -#define CRTC_H_SYNC_STRT_WID IOPortTag(0x01u, 0x01u) -#define CRTC_H_SYNC_STRT 0x000000fful -#define CRTC_H_SYNC_DLY 0x00000700ul -/* ? 0x00000800ul */ -#define CRTC_H_SYNC_STRT_HI 0x00001000ul -/* ? 0x0000e000ul */ -#define CRTC_H_SYNC_WID 0x001f0000ul -#define CRTC_H_SYNC_POL 0x00200000ul -/* ? 0xffc00000ul */ -#define CRTC_V_TOTAL_DISP IOPortTag(0x02u, 0x02u) -#define CRTC_V_TOTAL 0x000007fful -/* ? 0x0000f800ul */ -#define CRTC_V_DISP 0x07ff0000ul -/* ? 0xf8000000ul */ -#define CRTC_V_SYNC_STRT_WID IOPortTag(0x03u, 0x03u) -#define CRTC_V_SYNC_STRT 0x000007fful -/* ? 0x0000f800ul */ -#define CRTC_V_SYNC_WID 0x001f0000ul -#define CRTC_V_SYNC_POL 0x00200000ul -/* ? 0xffc00000ul */ -#define CRTC_VLINE_CRNT_VLINE IOPortTag(0x04u, 0x04u) -#define CRTC_VLINE 0x000007fful -/* ? 0x0000f800ul */ -#define CRTC_CRNT_VLINE 0x07ff0000ul -/* ? 0xf8000000ul */ -#define CRTC_OFF_PITCH IOPortTag(0x05u, 0x05u) -#define CRTC_OFFSET 0x000ffffful -#define CRTC_OFFSET_VGA 0x0003fffful -#define CRTC_OFFSET_LOCK 0x00100000ul /* XC/XL */ -/* ? 0x00200000ul */ -#define CRTC_PITCH 0xffc00000ul -#define CRTC_INT_CNTL IOPortTag(0x06u, 0x06u) -#define CRTC_VBLANK 0x00000001ul -#define CRTC_VBLANK_INT_EN 0x00000002ul -#define CRTC_VBLANK_INT 0x00000004ul -#define CRTC_VLINE_INT_EN 0x00000008ul -#define CRTC_VLINE_INT 0x00000010ul -#define CRTC_VLINE_SYNC 0x00000020ul -#define CRTC_FRAME 0x00000040ul -#define CRTC_SNAPSHOT_INT_EN 0x00000080ul /* GTPro */ -#define CRTC_SNAPSHOT_INT 0x00000100ul /* GTPro */ -#define CRTC_I2C_INT_EN 0x00000200ul /* GTPro */ -#define CRTC_I2C_INT 0x00000400ul /* GTPro */ -#define CRTC2_VBLANK 0x00000800ul /* LTPro */ -#define CRTC2_VBLANK_INT_EN 0x00001000ul /* LTPro */ -#define CRTC2_VBLANK_INT 0x00002000ul /* LTPro */ -#define CRTC2_VLINE_INT_EN 0x00004000ul /* LTPro */ -#define CRTC2_VLINE_INT 0x00008000ul /* LTPro */ -#define CRTC_CAPBUF0_INT_EN 0x00010000ul /* VT/GT */ -#define CRTC_CAPBUF0_INT 0x00020000ul /* VT/GT */ -#define CRTC_CAPBUF1_INT_EN 0x00040000ul /* VT/GT */ -#define CRTC_CAPBUF1_INT 0x00080000ul /* VT/GT */ -#define CRTC_OVERLAY_EOF_INT_EN 0x00100000ul /* VT/GT */ -#define CRTC_OVERLAY_EOF_INT 0x00200000ul /* VT/GT */ -#define CRTC_ONESHOT_CAP_INT_EN 0x00400000ul /* VT/GT */ -#define CRTC_ONESHOT_CAP_INT 0x00800000ul /* VT/GT */ -#define CRTC_BUSMASTER_EOL_INT_EN 0x01000000ul /* VTB/GTB/LT */ -#define CRTC_BUSMASTER_EOL_INT 0x02000000ul /* VTB/GTB/LT */ -#define CRTC_GP_INT_EN 0x04000000ul /* VTB/GTB/LT */ -#define CRTC_GP_INT 0x08000000ul /* VTB/GTB/LT */ -#define CRTC2_VLINE_SYNC 0x10000000ul /* LTPro */ -#define CRTC_SNAPSHOT2_INT_EN 0x20000000ul /* LTPro */ -#define CRTC_SNAPSHOT2_INT 0x40000000ul /* LTPro */ -#define CRTC_VBLANK_BIT2_INT 0x80000000ul /* GTPro */ -#define CRTC_INT_ENS /* *** UPDATE ME *** */ \ - ( \ - CRTC_VBLANK_INT_EN | \ - CRTC_VLINE_INT_EN | \ - CRTC_SNAPSHOT_INT_EN | \ - CRTC_I2C_INT_EN | \ - CRTC2_VBLANK_INT_EN | \ - CRTC2_VLINE_INT_EN | \ - CRTC_CAPBUF0_INT_EN | \ - CRTC_CAPBUF1_INT_EN | \ - CRTC_OVERLAY_EOF_INT_EN | \ - CRTC_ONESHOT_CAP_INT_EN | \ - CRTC_BUSMASTER_EOL_INT_EN | \ - CRTC_GP_INT_EN | \ - CRTC_SNAPSHOT2_INT_EN | \ - 0 \ - ) -#define CRTC_INT_ACKS /* *** UPDATE ME *** */ \ - ( \ - CRTC_VBLANK_INT | \ - CRTC_VLINE_INT | \ - CRTC_SNAPSHOT_INT | \ - CRTC_I2C_INT | \ - CRTC2_VBLANK_INT | \ - CRTC2_VLINE_INT | \ - CRTC_CAPBUF0_INT | \ - CRTC_CAPBUF1_INT | \ - CRTC_OVERLAY_EOF_INT | \ - CRTC_ONESHOT_CAP_INT | \ - CRTC_BUSMASTER_EOL_INT | \ - CRTC_GP_INT | \ - CRTC_SNAPSHOT2_INT | \ - CRTC_VBLANK_BIT2_INT | \ - 0 \ - ) -#define CRTC_GEN_CNTL IOPortTag(0x07u, 0x07u) -#define CRTC_DBL_SCAN_EN 0x00000001ul -#define CRTC_INTERLACE_EN 0x00000002ul -#define CRTC_HSYNC_DIS 0x00000004ul -#define CRTC_VSYNC_DIS 0x00000008ul -#define CRTC_CSYNC_EN 0x00000010ul -#define CRTC_PIX_BY_2_EN 0x00000020ul -#define CRTC2_DBL_SCAN_EN 0x00000020ul /* LTPro */ -#define CRTC_DISPLAY_DIS 0x00000040ul -#define CRTC_VGA_XOVERSCAN 0x00000080ul -#define CRTC_PIX_WIDTH 0x00000700ul -#define CRTC_BYTE_PIX_ORDER 0x00000800ul -#define CRTC_VSYNC_INT_EN 0x00001000ul /* XC/XL */ -#define CRTC_VSYNC_INT 0x00002000ul /* XC/XL */ -#define CRTC_FIFO_OVERFILL 0x0000c000ul /* VT/GT */ -#define CRTC2_VSYNC_INT_EN 0x00004000ul /* XC/XL */ -#define CRTC2_VSYNC_INT 0x00008000ul /* XC/XL */ -#define CRTC_FIFO_LWM 0x000f0000ul -#define CRTC_HVSYNC_IO_DRIVE 0x00010000ul /* XC/XL */ -#define CRTC2_PIX_WIDTH 0x000e0000ul /* LTPro */ -#define CRTC_VGA_128KAP_PAGING 0x00100000ul /* VT/GT */ -#define CRTC_DISPREQ_ONLY 0x00200000ul /* VT/GT */ -#define CRTC_VFC_SYNC_TRISTATE 0x00200000ul /* VTB/GTB/LT */ -#define CRTC2_EN 0x00200000ul /* LTPro */ -#define CRTC_LOCK_REGS 0x00400000ul /* VT/GT */ -#define CRTC_SYNC_TRISTATE 0x00800000ul /* VT/GT */ -#define CRTC_EXT_DISP_EN 0x01000000ul -#define CRTC_EN 0x02000000ul -#define CRTC_DISP_REQ_EN 0x04000000ul -#define CRTC_VGA_LINEAR 0x08000000ul -#define CRTC_VSYNC_FALL_EDGE 0x10000000ul -#define CRTC_VGA_TEXT_132 0x20000000ul -#define CRTC_CNT_EN 0x40000000ul -#define CRTC_CUR_B_TEST 0x80000000ul -#define CRTC_INT_ENS_X /* *** UPDATE ME *** */ \ - ( \ - CRTC_VSYNC_INT_EN | \ - CRTC2_VSYNC_INT_EN | \ - 0 \ - ) -#define CRTC_INT_ACKS_X /* *** UPDATE ME *** */ \ - ( \ - CRTC_VSYNC_INT | \ - CRTC2_VSYNC_INT | \ - 0 \ - ) -#define DSP_CONFIG BlockIOTag(0x08u) /* VTB/GTB/LT */ -#define DSP_XCLKS_PER_QW 0x00003ffful -/* ? 0x00004000ul */ -#define DSP_FLUSH_WB 0x00008000ul -#define DSP_LOOP_LATENCY 0x000f0000ul -#define DSP_PRECISION 0x00700000ul -/* ? 0xff800000ul */ -#define DSP_ON_OFF BlockIOTag(0x09u) /* VTB/GTB/LT */ -#define DSP_OFF 0x000007fful -/* ? 0x0000f800ul */ -#define DSP_ON 0x07ff0000ul -/* ? 0xf8000000ul */ -#define TIMER_CONFIG BlockIOTag(0x0au) /* VTB/GTB/LT */ -#define MEM_BUF_CNTL BlockIOTag(0x0bu) /* VTB/GTB/LT */ -#define SHARED_CNTL BlockIOTag(0x0cu) /* VTB/GTB/LT */ -#define SHARED_MEM_CONFIG BlockIOTag(0x0du) /* VTB/GTB/LT */ -#define MEM_ADDR_CONFIG BlockIOTag(0x0du) /* GTPro */ -#define SHARED_CNTL_CTD BlockIOTag(0x0eu) /* CTD */ -/* ? 0x00fffffful */ -#define CTD_FIFO5 0x01000000ul -/* ? 0xfe000000ul */ -#define CRT_TRAP BlockIOTag(0x0eu) /* VTB/GTB/LT */ -#define DSTN_CONTROL BlockIOTag(0x0fu) /* LT */ -#define I2C_CNTL_0 BlockIOTag(0x0fu) /* GTPro */ -#define I2C_CNTL_STAT 0x0000000ful -#define I2C_CNTL_DONE 0x00000001ul -#define I2C_CNTL_NACK 0x00000002ul -#define I2C_CNTL_HALT 0x00000004ul -#define I2C_CNTL_FULL 0x00000008ul -/* ? 0x00000010ul */ -#define I2C_CNTL_HPTR_RST 0x00000020ul -/* ? 0x000000c0ul */ -#define I2C_CNTL_START 0x00000100ul -#define I2C_CNTL_STOP 0x00000200ul -#define I2C_CNTL_GO 0x00000400ul -#define I2C_CNTL_RECEIVE 0x00000800ul -#define I2C_CNTL_ABORT 0x00001000ul -#define I2C_CNTL_INT_EN 0x00002000ul -#define I2C_CNTL_SCL 0x00004000ul -#define I2C_CNTL_SDA 0x00008000ul -#define I2C_CNTL_M_FACTOR 0x00ff0000ul -#define I2C_CNTL_N_FACTOR 0xff000000ul -#define OVR_CLR IOPortTag(0x08u, 0x10u) -#define OVR_CLR_8 0x000000fful -#define OVR_CLR_B 0x0000ff00ul -#define OVR_CLR_G 0x00ff0000ul -#define OVR_CLR_R 0xff000000ul -#define OVR_WID_LEFT_RIGHT IOPortTag(0x09u, 0x11u) -#define OVR_WID_LEFT 0x0000003ful /* 0x0f on <LT */ -/* ? 0x0000ffc0ul */ -#define OVR_WID_RIGHT 0x003f0000ul /* 0x0f0000 on <LT */ -/* ? 0xffc00000ul */ -#define OVR_WID_TOP_BOTTOM IOPortTag(0x0au, 0x12u) -#define OVR_WID_TOP 0x000001fful /* 0x00ff on <LT */ -/* ? 0x0000fe00ul */ -#define OVR_WID_BOTTOM 0x01ff0000ul /* 0x00ff0000 on <LT */ -/* ? 0xfe000000ul */ -#define VGA_DSP_CONFIG BlockIOTag(0x13u) /* VTB/GTB/LT */ -#define VGA_DSP_XCLKS_PER_QW DSP_XCLKS_PER_QW -/* ? 0x000fc000ul */ -#define VGA_DSP_PREC_PCLKBY2 0x00700000ul -/* ? 0x00800000ul */ -#define VGA_DSP_PREC_PCLK 0x07000000ul -/* ? 0xf8000000ul */ -#define VGA_DSP_ON_OFF BlockIOTag(0x14u) /* VTB/GTB/LT */ -#define VGA_DSP_OFF DSP_OFF -/* ? 0x0000f800ul */ -#define VGA_DSP_ON DSP_ON -/* ? 0xf8000000ul */ -#define DSP2_CONFIG BlockIOTag(0x15u) /* LTPro */ -#define DSP2_ON_OFF BlockIOTag(0x16u) /* LTPro */ -#define EXT_CRTC_GEN_CNTL BlockIOTag(0x17u) /* VT-A4 (W) */ -#define CRTC2_OFF_PITCH BlockIOTag(0x17u) /* LTPro */ -#define CUR_CLR0 IOPortTag(0x0bu, 0x18u) -#define CUR_CLR1 IOPortTag(0x0cu, 0x19u) -/* These are for both CUR_CLR0 and CUR_CLR1 */ -#define CUR_CLR_I 0x000000fful -#define CUR_CLR_B 0x0000ff00ul -#define CUR_CLR_G 0x00ff0000ul -#define CUR_CLR_R 0xff000000ul -#define CUR_CLR (CUR_CLR_R | CUR_CLR_G | CUR_CLR_B) -#define CUR_OFFSET IOPortTag(0x0du, 0x1au) -#define CUR_HORZ_VERT_POSN IOPortTag(0x0eu, 0x1bu) -#define CUR_HORZ_POSN 0x000007fful -/* ? 0x0000f800ul */ -#define CUR_VERT_POSN 0x07ff0000ul -/* ? 0xf8000000ul */ -#define CUR_HORZ_VERT_OFF IOPortTag(0x0fu, 0x1cu) -#define CUR_HORZ_OFF 0x0000007ful -/* ? 0x0000ff80ul */ -#define CUR_VERT_OFF 0x007f0000ul -/* ? 0xff800000ul */ -#define CONFIG_PANEL BlockIOTag(0x1du) /* LT */ -#define PANEL_FORMAT 0x00000007ul -/* ? 0x00000008ul */ -#define PANEL_TYPE 0x000000f0ul -#define NO_OF_GREY 0x00000700ul -#define MOD_GEN 0x00001800ul -#define EXT_LVDS_CLK 0x00001800ul /* LTPro */ -#define BLINK_RATE 0x00006000ul -#define BLINK_RATE_PRO 0x00002000ul /* LTPro */ -#define DONT_SHADOW_HEND 0x00004000ul /* LTPro */ -#define DONT_USE_F32KHZ 0x00008000ul -#define LCD_IO_DRIVE 0x00008000ul /* XC/XL */ -#define FP_POL 0x00010000ul -#define LP_POL 0x00020000ul -#define DTMG_POL 0x00040000ul -#define SCK_POL 0x00080000ul -#define DITHER_SEL 0x00300000ul -#define INVERSE_VIDEO_EN 0x00400000ul -#define BL_CLK_SEL 0x01800000ul -#define BL_LEVEL 0x0e000000ul -#define BL_CLK_SEL_PRO 0x00800000ul /* LTPro */ -#define BL_LEVEL_PRO 0x03000000ul /* LTPro */ -#define BIAS_LEVEL_PRO 0x0c000000ul /* LTPro */ -#define HSYNC_DELAY 0xf0000000ul -#define TV_OUT_INDEX BlockIOTag(0x1du) /* LTPro */ -#define TV_REG_INDEX 0x000000fful -#define TV_ON 0x00000100ul -/* ? 0xfffffe00ul */ -#define GP_IO IOPortTag(0x1eu, 0x1eu) /* VT/GT */ -#define GP_IO_0 0x00000001ul -#define GP_IO_1 0x00000002ul -#define GP_IO_2 0x00000004ul -#define GP_IO_3 0x00000008ul -#define GP_IO_4 0x00000010ul -#define GP_IO_5 0x00000020ul -#define GP_IO_6 0x00000040ul -#define GP_IO_7 0x00000080ul -#define GP_IO_8 0x00000100ul -#define GP_IO_9 0x00000200ul -#define GP_IO_A 0x00000400ul -#define GP_IO_B 0x00000800ul -#define GP_IO_C 0x00001000ul -#define GP_IO_D 0x00002000ul -#define GP_IO_E 0x00004000ul -#define GP_IO_F 0x00008000ul -#define GP_IO_DIR_0 0x00010000ul -#define GP_IO_DIR_1 0x00020000ul -#define GP_IO_DIR_2 0x00040000ul -#define GP_IO_DIR_3 0x00080000ul -#define GP_IO_DIR_4 0x00100000ul -#define GP_IO_DIR_5 0x00200000ul -#define GP_IO_DIR_6 0x00400000ul -#define GP_IO_DIR_7 0x00800000ul -#define GP_IO_DIR_8 0x01000000ul -#define GP_IO_DIR_9 0x02000000ul -#define GP_IO_DIR_A 0x04000000ul -#define GP_IO_DIR_B 0x08000000ul -#define GP_IO_DIR_C 0x10000000ul -#define GP_IO_DIR_D 0x20000000ul -#define GP_IO_DIR_E 0x40000000ul -#define GP_IO_DIR_F 0x80000000ul -#define GP_IO_CNTL BlockIOTag(0x1fu) /* VT/GT */ -#define GP_IO_MODE 0x0000000ful -/* ? 0x7ffffff0ul */ -#define GP_IO_EN 0x80000000ul -#define HW_DEBUG BlockIOTag(0x1fu) /* VTB/GTB/LT */ -#define FAST_SRCCOPY_DIS 0x00000001ul -#define BYPASS_SUBPIC_DBF 0x00000001ul /* XL/XC */ -#define SRC_AUTONA_FIX_DIS 0x00000002ul -#define SYNC_PD_EN 0x00000002ul /* Mobility */ -#define DISP_QW_FIX_DIS 0x00000004ul -#define GUIDST_WB_EXP_DIS 0x00000008ul -#define CYC_ALL_FIX_DIS 0x00000008ul /* GTPro */ -#define AGPPLL_FIX_EN 0x00000008ul /* Mobility */ -#define SRC_AUTONA_ALWAYS_EN 0x00000010ul -#define GUI_BEATS_HOST_P 0x00000010ul /* GTPro */ -#define DRV_CNTL_DQMB_WEB 0x00000020ul -#define FAST_FILL_SCISSOR_DIS 0x00000020ul /* GT2c/VT4 */ -#define INTER_BLIT_FIX_DIS 0x00000020ul /* GTPro */ -#define DRV_CNTL_MA 0x00000040ul -#define AUTO_BLKWRT_COLOR_DIS 0x00000040ul /* GT2c/VT4 */ -#define INTER_PRIM_DIS 0x00000040ul /* GTPro */ -#define DRV_CNTL_MD 0x00000080ul -#define CHG_DEV_ID 0x00000100ul -#define SRC_TRACK_DST_FIX_DIS 0x00000200ul -#define HCLK_FB_SKEW 0x00000380ul /* GT2c/VT4 */ -#define SRC_TRACK_DST_FIX_DIS_P 0x00000080ul /* GTPro */ -#define AUTO_BLKWRT_COLOR_DIS_P 0x00000100ul /* GTPro */ -#define INTER_LINE_OVERLAP_DIS 0x00000200ul /* GTPro */ -#define MEM_OE_PULLBACK 0x00000400ul -#define DBL_BUFFER_EN 0x00000400ul /* GTPro */ -#define MEM_WE_FIX_DIS 0x00000800ul -#define MEM_OE_PULLBACK_B 0x00000800ul /* GT2c/VT4 */ -#define CMDFIFO_SIZE_EN 0x00000800ul /* GTPro */ -#define RD_EN_FIX_DIS 0x00001000ul -#define MEM_WE_FIX_DIS_B 0x00001000ul -#define AUTO_FF_DIS 0x00001000ul /* GTPro */ -#define CMDFIFO_SIZE_DIS 0x00002000ul /* GT2c/VT4 */ -#define AUTO_BLKWRT_DIS 0x00002000ul /* GTPro */ -#define GUI_BEATS_HOST 0x00004000ul /* GT2c/VT4 */ -#define ORED_INVLD_RB_CACHE 0x00004000ul /* GTPro */ -#define BLOCK_DBL_BUF 0x00008000ul /* GTPro */ -#define R2W_TURNAROUND_DELAY 0x00020000ul /* GT2c/VT4 */ -#define ENA_32BIT_DATA_BUS 0x00040000ul /* GT2c/VT4 */ -#define HCLK_FB_SKEW_P 0x00070000ul /* GTPro */ -#define ENA_FLASH_ROM 0x00080000ul /* GT2c/VT4 */ -#define DISABLE_SWITCH_FIX 0x00080000ul /* GTPro */ -#define MCLK_START_EN 0x00080000ul /* LTPro */ -#define SEL_VBLANK_BDL_BUF 0x00100000ul /* GTPro */ -#define CMDFIFO_64EN 0x00200000ul /* GTPro */ -#define BM_FIX_DIS 0x00400000ul /* GTPro */ -#define Z_SWITCH_EN 0x00800000ul /* LTPro */ -#define FLUSH_HOST_WB 0x01000000ul /* GTPro */ -#define HW_DEBUG_WRITE_MSK_FIX_DIS 0x02000000ul /* LTPro */ -#define Z_NO_WRITE_EN 0x04000000ul /* LTPro */ -#define DISABLE_PCLK_RESET_P 0x08000000ul /* LTPro */ -#define PM_D3_SUPPORT_ENABLE_P 0x10000000ul /* LTPro */ -#define STARTCYCLE_FIX_ENABLE 0x20000000ul /* LTPro */ -#define DONT_RST_CHAREN 0x20000000ul /* XL/XC */ -#define C3_FIX_ENABLE 0x40000000ul /* LTPro */ -#define BM_HOSTRA_EN 0x40000000ul /* XL/XC */ -#define PKGBGAb 0x80000000ul /* XL/XC */ -#define AUTOEXP_HORZ_FIX 0x80000000ul /* Mobility */ -#define SCRATCH_REG0 IOPortTag(0x10u, 0x20u) -#define SCRATCH_REG1 IOPortTag(0x11u, 0x21u) -/* BIOS_BASE_SEGMENT 0x0000007ful */ /* As above */ -/* ? 0x00000f80ul */ -#define BIOS_INIT_DAC_SUBTYPE 0x0000f000ul -/* ? 0xffff0000ul */ -#define SCRATCH_REG2 BlockIOTag(0x22u) /* LT */ -#define SCRATCH_REG3 BlockIOTag(0x23u) /* GTPro */ -/* Not described here 0x07fffffful */ -#define DISPLAY_SWITCH_DISABLE 0x08000000ul -/* Not described here 0xf0000000ul */ -#define CLOCK_CNTL IOPortTag(0x12u, 0x24u) -#define CLOCK_BIT 0x00000004ul /* For ICS2595 */ -#define CLOCK_PULSE 0x00000008ul /* For ICS2595 */ -#define CLOCK_SELECT 0x0000000ful -#define CLOCK_DIVIDER 0x00000030ul -#define CLOCK_STROBE 0x00000040ul -#define CLOCK_DATA 0x00000080ul -/* ? 0x00000100ul */ -#define PLL_WR_EN 0x00000200ul /* For internal PLL */ -#define PLL_ADDR 0x0000fc00ul /* For internal PLL */ -#define PLL_DATA 0x00ff0000ul /* For internal PLL */ -/* ? 0xff000000ul */ -#define CONFIG_STAT64_1 BlockIOTag(0x25u) /* GTPro */ -#define CFG_SUBSYS_DEV_ID 0x000000fful -#define CFG_SUBSYS_VEN_ID 0x00ffff00ul -/* ? 0x1f000000ul */ -#define CFG_DIMM_TYPE 0xe0000000ul -#define CFG_PCI_SUBSYS_DEV_ID 0x0000fffful /* XC/XL */ -#define CFG_PCI_SUBSYS_VEN_ID 0xffff0000ul /* XC/XL */ -#define CONFIG_STAT64_2 BlockIOTag(0x26u) /* GTPro */ -#define CFG_DIMM_TYPE_3 0x00000001ul -/* ? 0x0000001eul */ -#define CFG_ROMWRTEN 0x00000020ul -#define CFG_AGPVCOGAIN 0x000000c0ul -#define CFG_PCI_TYPE 0x00000100ul -#define CFG_AGPSKEW 0x00000e00ul -#define CFG_X1CLKSKEW 0x00007000ul -#define CFG_PANEL_ID_P 0x000f8000ul /* LTPro */ -/* ? 0x00100000ul */ -#define CFG_PREFETCH_EN 0x00200000ul -#define CFG_ID_DISABLE 0x00400000ul -#define CFG_PRE_TESTEN 0x00800000ul -/* ? 0x01000000ul */ -#define CFG_PCI5VEN 0x02000000ul /* LTPro */ -#define CFG_VGA_DISABLE 0x04000000ul -#define CFG_ENINTB 0x08000000ul -/* ? 0x10000000ul */ -#define CFG_ROM_REMAP_2 0x20000000ul -#define CFG_IDSEL 0x40000000ul -/* ? 0x80000000ul */ -#define TV_OUT_DATA BlockIOTag(0x27u) /* LTPro */ -#define BUS_CNTL IOPortTag(0x13u, 0x28u) -#define BUS_WS 0x0000000ful -#define BUS_DBL_RESYNC 0x00000001ul /* VTB/GTB/LT */ -#define BUS_MSTR_RESET 0x00000002ul /* VTB/GTB/LT */ -#define BUS_FLUSH_BUF 0x00000004ul /* VTB/GTB/LT */ -#define BUS_STOP_REQ_DIS 0x00000008ul /* VTB/GTB/LT */ -#define BUS_ROM_WS 0x000000f0ul -#define BUS_APER_REG_DIS 0x00000010ul /* VTB/GTB/LT */ -#define BUS_EXTRA_PIPE_DIS 0x00000020ul /* VTB/GTB/LT */ -#define BUS_MASTER_DIS 0x00000040ul /* VTB/GTB/LT */ -#define BUS_ROM_WRT_EN 0x00000080ul /* GTPro */ -#define BUS_ROM_PAGE 0x00000f00ul -#define BUS_MINOR_REV_ID 0x00000700ul /* LTPro */ -/* First silicom - Prototype (A11) 0x00000000ul */ -/* Metal mask spin (A12 & A13) 0x00000100ul */ -/* All layer spin (A21) 0x00000200ul */ -/* Fast metal spin (A22) - Prod. 0x00000300ul */ -/* All layer spin (A31) 0x00000700ul */ -/* ? 0x00000800ul */ /* LTPro */ -#define BUS_CHIP_HIDDEN_REV 0x00000300ul /* XC/XL */ -/* ? 0x00001c00ul */ /* XC/XL */ -#define BUS_ROM_DIS 0x00001000ul -#define BUS_IO_16_EN 0x00002000ul /* GX */ -#define BUS_PCI_READ_RETRY_EN 0x00002000ul /* VTB/GTB/LT */ -#define BUS_DAC_SNOOP_EN 0x00004000ul -#define BUS_PCI_RETRY_EN 0x00008000ul /* VT/GT */ -#define BUS_PCI_WRT_RETRY_EN 0x00008000ul /* VTB/GTB/LT */ -#define BUS_FIFO_WS 0x000f0000ul -#define BUS_RETRY_WS 0x000f0000ul /* VTB/GTB/LT */ -#define BUS_FIFO_ERR_INT_EN 0x00100000ul -#define BUS_MSTR_RD_MULT 0x00100000ul /* VTB/GTB/LT */ -#define BUS_FIFO_ERR_INT 0x00200000ul -#define BUS_MSTR_RD_LINE 0x00200000ul /* VTB/GTB/LT */ -#define BUS_HOST_ERR_INT_EN 0x00400000ul -#define BUS_SUSPEND 0x00400000ul /* GTPro */ -#define BUS_HOST_ERR_INT 0x00800000ul -#define BUS_LAT16X 0x00800000ul /* GTPro */ -#define BUS_PCI_DAC_WS 0x07000000ul -#define BUS_RD_DISCARD_EN 0x01000000ul /* VTB/GTB/LT */ -#define BUS_RD_ABORT_EN 0x02000000ul /* VTB/GTB/LT */ -#define BUS_MSTR_WS 0x04000000ul /* VTB/GTB/LT */ -#define BUS_PCI_DAC_DLY 0x08000000ul -#define BUS_EXT_REG_EN 0x08000000ul /* VT/GT */ -#define BUS_PCI_MEMW_WS 0x10000000ul -#define BUS_MSTR_DISCONNECT_EN 0x10000000ul /* VTB/GTB/LT */ -#define BUS_PCI_BURST_DEC 0x20000000ul /* GX/CX */ -#define BUS_BURST 0x20000000ul /* 264xT */ -#define BUS_WRT_BURST 0x20000000ul /* VTB/GTB/LT */ -#define BUS_RDY_READ_DLY 0xc0000000ul -#define BUS_READ_BURST 0x40000000ul /* VTB/GTB/LT */ -#define BUS_RDY_READ_DLY_B 0x80000000ul /* VTB/GTB/LT */ -#define LCD_INDEX BlockIOTag(0x29u) /* LTPro */ -#define LCD_REG_INDEX 0x0000003ful -/* ? 0x000000c0ul */ -#define LCD_DISPLAY_DIS 0x00000100ul -#define LCD_SRC_SEL 0x00000200ul -#define LCD_SRC_SEL_CRTC1 0x00000000ul -#define LCD_SRC_SEL_CRTC2 0x00000200ul -#define LCD_CRTC2_DISPLAY_DIS 0x00000400ul -#define LCD_GUI_ACTIVE 0x00000800ul /* XC/XL */ -/* ? 0x00fff000ul */ -#define LCD_MONDET_SENSE 0x01000000ul /* XC/XL */ -#define LCD_MONDET_INT_POL 0x02000000ul /* XC/XL */ -#define LCD_MONDET_INT_EN 0x04000000ul /* XC/XL */ -#define LCD_MONDET_INT 0x08000000ul /* XC/XL */ -#define LCD_MONDET_EN 0x10000000ul /* XC/XL */ -#define LCD_EN_PL 0x20000000ul /* XC/XL */ -/* ? 0xc0000000ul */ -#define HFB_PITCH_ADDR BlockIOTag(0x2au) /* LT */ -#define LCD_DATA BlockIOTag(0x2au) /* LTPro */ -#define EXT_MEM_CNTL BlockIOTag(0x2bu) /* VTB/GTB/LT */ -#define MEM_CNTL IOPortTag(0x14u, 0x2cu) -#define CTL_MEM_SIZE 0x00000007ul -/* ? 0x00000008ul */ -#define CTL_MEM_REFRESH 0x00000078ul /* VT/GT */ -#define CTL_MEM_SIZEB 0x0000000ful /* VTB/GTB/LT */ -#define CTL_MEM_RD_LATCH_EN 0x00000010ul -#define CTL_MEM_RD_LATCH_DLY 0x00000020ul -#define CTL_MEM_LATENCY 0x00000030ul /* VTB/GTB/LT */ -#define CTL_MEM_SD_LATCH_EN 0x00000040ul -#define CTL_MEM_SD_LATCH_DLY 0x00000080ul -#define CTL_MEM_LATCH 0x000000c0ul /* VTB/GTB/LT */ -#define CTL_MEM_WDOE_CNTL 0x000000c0ul /* XC/XL */ -#define CTL_MEM_FULL_PLS 0x00000100ul -#define CTL_MEM_CYC_LNTH_AUX 0x00000180ul /* VT/GT */ -#define CTL_MEM_TRP 0x00000300ul /* VTB/GTB/LT */ -#define CTL_MEM_CYC_LNTH 0x00000600ul -#define CTL_MEM_REFRESH_RATE 0x00001800ul /* 264xT */ -#define CTL_MEM_TRCD 0x00000c00ul /* VTB/GTB/LT */ -#define CTL_MEM_WR_RDY_SEL 0x00000800ul /* GX/CX */ -#define CTL_MEM_EXT_RMW_CYC_EN 0x00001000ul /* GX/CX */ -#define CTL_MEM_TCRD 0x00001000ul /* VTB/GTB/LT */ -#define CTL_MEM_DLL_RESET 0x00002000ul /* VT/GT */ -#define CTL_MEM_TR2W 0x00002000ul /* GTPro */ -#define CTL_MEM_ACTV_PRE 0x0000c000ul /* VT/GT */ -#define CTL_MEM_CAS_PHASE 0x00004000ul /* GTPro */ -#define CTL_MEM_OE_PULLBACK 0x00008000ul /* GTPro */ -#define CTL_MEM_TWR 0x0000c000ul /* XC/XL */ -#define CTL_MEM_BNDRY 0x00030000ul -#define CTL_MEM_BNDRY_0K 0x00000000ul -#define CTL_MEM_BNDRY_256K 0x00010000ul -#define CTL_MEM_BNDRY_512K 0x00020000ul -#define CTL_MEM_BNDRY_1024K 0x00030000ul -#define CTL_MEM_DLL_GAIN_CNTL 0x00030000ul /* VT/GT */ -#define CTL_MEM_BNDRY_EN 0x00040000ul -#define CTL_MEM_SDRAM_RESET 0x00040000ul /* VT/GT */ -#define CTL_MEM_TRAS 0x00070000ul /* VTB/GTB/LT */ -#define CTL_MEM_TILE_SELECT 0x00180000ul /* VT/GT */ -#define CTL_MEM_REFRESH_DIS 0x00080000ul /* VTB/GTB/LT */ -#define CTL_MEM_LOW_LATENCY_MODE 0x00200000ul /* VT/GT */ -#define CTL_MEM_CDE_PULLBACK 0x00400000ul /* VT/GT */ -#define CTL_MEM_REFRESH_RATE_B 0x00f00000ul /* VTB/GTB/LT */ -#define CTL_MEM_PIX_WIDTH 0x07000000ul -#define CTL_MEM_LOWER_APER_ENDIAN 0x03000000ul /* VTB/GTB/LT */ -#define CTL_MEM_OE_SELECT 0x18000000ul /* VT/GT */ -#define CTL_MEM_UPPER_APER_ENDIAN 0x0c000000ul /* VTB/GTB/LT */ -/* ? 0xe0000000ul */ -#define CTL_MEM_PAGE_SIZE 0x30000000ul /* VTB/GTB/LT */ -#define MEM_VGA_WP_SEL IOPortTag(0x15u, 0x2du) -#define MEM_VGA_WPS0 0x0000fffful -#define MEM_VGA_WPS1 0xffff0000ul -#define MEM_VGA_RP_SEL IOPortTag(0x16u, 0x2eu) -#define MEM_VGA_RPS0 0x0000fffful -#define MEM_VGA_RPS1 0xffff0000ul -#define LT_GIO BlockIOTag(0x2fu) /* LT */ -#define I2C_CNTL_1 BlockIOTag(0x2fu) /* GTPro */ -#define I2C_DATA_PORT 0x000000fful -#define I2C_DATA_COUNT 0x0000ff00ul -#define I2C_ADDR_COUNT 0x00070000ul -/* ? 0x00380000ul */ -#define I2C_SEL 0x00400000ul -/* ? 0x00800000ul */ -#define I2C_TIME_LIMIT 0xff000000ul -#define DAC_REGS IOPortTag(0x17u, 0x30u) /* 4 separate bytes */ -#define M64_DAC_WRITE (DAC_REGS + 0) -#define M64_DAC_DATA (DAC_REGS + 1) -#define M64_DAC_MASK (DAC_REGS + 2) -#define M64_DAC_READ (DAC_REGS + 3) -#define DAC_CNTL IOPortTag(0x18u, 0x31u) -#define DAC_EXT_SEL 0x00000003ul -#define DAC_EXT_SEL_RS2 0x000000001ul -#define DAC_EXT_SEL_RS3 0x000000002ul -#define DAC_RANGE_CTL 0x00000003ul /* VTB/GTB/LT */ -#define DAC_BLANKING 0x00000004ul /* 264xT */ -#define DAC_CMP_DIS 0x00000008ul /* 264xT */ -#define DAC1_CLK_SEL 0x00000010ul /* LTPro */ -#define DAC_PALETTE_ACCESS_CNTL 0x00000020ul /* LTPro */ -#define DAC_PALETTE2_SNOOP_EN 0x00000040ul /* LTPro */ -#define DAC_CMP_OUTPUT 0x00000080ul /* 264xT */ -#define DAC_8BIT_EN 0x00000100ul -#define DAC_PIX_DLY 0x00000600ul -#define DAC_DIRECT 0x00000400ul /* VTB/GTB/LT */ -#define DAC_BLANK_ADJ 0x00001800ul -#define DAC_PAL_CLK_SEL 0x00000800ul /* VTB/GTB/LT */ -#define DAC_CRT_SENSE 0x00000800ul /* XC/XL */ -#define DAC_CRT_DETECTION_ON 0x00001000ul /* XC/XL */ -#define DAC_VGA_ADR_EN 0x00002000ul -#define DAC_FEA_CON_EN 0x00004000ul /* 264xT */ -#define DAC_PDMN 0x00008000ul /* 264xT */ -#define DAC_TYPE 0x00070000ul -/* ? 0x00f80000ul */ -#define DAC_MON_ID_STATE0 0x01000000ul /* GX-E+/CX */ -#define DAC_GIO_STATE_1 0x01000000ul /* 264xT */ -#define DAC_MON_ID_STATE1 0x02000000ul /* GX-E+/CX */ -#define DAC_GIO_STATE_0 0x02000000ul /* 264xT */ -#define DAC_MON_ID_STATE2 0x04000000ul /* GX-E+/CX */ -#define DAC_GIO_STATE_4 0x04000000ul /* 264xT */ -#define DAC_MON_ID_DIR0 0x08000000ul /* GX-E+/CX */ -#define DAC_GIO_DIR_1 0x08000000ul /* 264xT */ -#define DAC_MON_ID_DIR1 0x10000000ul /* GX-E+/CX */ -#define DAC_GIO_DIR_0 0x10000000ul /* 264xT */ -#define DAC_MON_ID_DIR2 0x20000000ul /* GX-E+/CX */ -#define DAC_GIO_DIR_4 0x20000000ul /* 264xT */ -#define DAC_MAN_CMP_STATE 0x40000000ul /* GX-E+ */ -#define DAC_RW_WS 0x80000000ul /* VT/GT */ -#define HORZ_STRETCHING BlockIOTag(0x32u) /* LT */ -#define HORZ_STRETCH_BLEND 0x00000ffful -#define HORZ_STRETCH_RATIO 0x0000fffful -#define HORZ_STRETCH_LOOP 0x00070000ul -#define HORZ_STRETCH_LOOP09 0x00000000ul -#define HORZ_STRETCH_LOOP11 0x00010000ul -#define HORZ_STRETCH_LOOP12 0x00020000ul -#define HORZ_STRETCH_LOOP14 0x00030000ul -#define HORZ_STRETCH_LOOP15 0x00040000ul -/* ? 0x00050000ul */ -/* ? 0x00060000ul */ -/* ? 0x00070000ul */ -/* ? 0x00080000ul */ -#define HORZ_PANEL_SIZE 0x0ff00000ul /* XC/XL */ -/* ? 0x10000000ul */ -#define AUTO_HORZ_RATIO 0x20000000ul /* XC/XL */ -#define HORZ_STRETCH_MODE 0x40000000ul -#define HORZ_STRETCH_EN 0x80000000ul -#define EXT_DAC_REGS BlockIOTag(0x32u) /* GTPro */ -#define EXT_DAC_REG_SEL 0x0000000ful -/* ? 0x000000f0ul */ -#define EXT_DAC_DATA 0x0000ff00ul -#define EXT_DAC_EN 0x00010000ul -#define EXT_DAC_WID 0x00020000ul -/* ? 0xfffc0000ul */ -#define VERT_STRETCHING BlockIOTag(0x33u) /* LT */ -#define VERT_STRETCH_RATIO0 0x000003fful -#define VERT_STRETCH_RATIO1 0x000ffc00ul -#define VERT_STRETCH_RATIO2 0x3ff00000ul -#define VERT_STRETCH_USE0 0x40000000ul -#define VERT_STRETCH_EN 0x80000000ul -#define GEN_TEST_CNTL IOPortTag(0x19u, 0x34u) -#define GEN_EE_DATA_OUT 0x00000001ul /* GX/CX */ -#define GEN_GIO2_DATA_OUT 0x00000001ul /* 264xT */ -#define GEN_EE_CLOCK 0x00000002ul /* GX/CX */ -/* ? 0x00000002ul */ /* 264xT */ -#define GEN_EE_CHIP_SEL 0x00000004ul /* GX/CX */ -#define GEN_GIO3_DATA_OUT 0x00000004ul /* 264xT */ -#define GEN_EE_DATA_IN 0x00000008ul /* GX/CX */ -#define GEN_GIO2_DATA_IN 0x00000008ul /* 264xT */ -#define GEN_EE_EN 0x00000010ul /* GX/CX */ -#define GEN_GIO2_ENABLE 0x00000010ul /* 264xT */ -#define GEN_ICON2_ENABLE 0x00000010ul /* XC/XL */ -#define GEN_OVR_OUTPUT_EN 0x00000020ul /* GX/CX */ -#define GEN_GIO2_WRITE 0x00000020ul /* 264xT */ -#define GEN_CUR2_ENABLE 0x00000020ul /* XC/XL */ -#define GEN_OVR_POLARITY 0x00000040ul /* GX/CX */ -#define GEN_ICON_ENABLE 0x00000040ul /* XC/XL */ -#define GEN_CUR_EN 0x00000080ul -#define GEN_GUI_EN 0x00000100ul /* GX/CX */ -#define GEN_GUI_RESETB 0x00000100ul /* 264xT */ -#define GEN_BLOCK_WR_EN 0x00000200ul /* GX */ -/* ? 0x00000200ul */ /* CX/264xT */ -#define GEN_SOFT_RESET 0x00000200ul /* VTB/GTB/LT */ -#define GEN_MEM_TRISTATE 0x00000400ul /* GTPro */ -/* ? 0x00000800ul */ -#define GEN_TEST_VECT_MODE 0x00003000ul /* VT/GT */ -/* ? 0x0000c000ul */ -#define GEN_TEST_FIFO_EN 0x00010000ul /* GX/CX */ -#define GEN_TEST_GUI_REGS_EN 0x00020000ul /* GX/CX */ -#define GEN_TEST_VECT_EN 0x00040000ul /* GX/CX */ -#define GEN_TEST_CRC_STR 0x00080000ul /* GX-C/-D */ -/* ? 0x00080000ul */ /* GX-E+/CX */ -#define GEN_TEST_MODE_T 0x000f0000ul /* 264xT */ -#define GEN_TEST_MODE 0x00700000ul /* GX/CX */ -#define GEN_TEST_CNT_EN 0x00100000ul /* 264xT */ -#define GEN_TEST_CRC_EN 0x00200000ul /* 264xT */ -/* ? 0x00400000ul */ /* 264xT */ -/* ? 0x00800000ul */ -#define GEN_TEST_MEM_WR 0x01000000ul /* GX-C/-D */ -#define GEN_TEST_MEM_STROBE 0x02000000ul /* GX-C/-D */ -#define GEN_TEST_DST_SS_EN 0x04000000ul /* GX/CX */ -#define GEN_TEST_DST_SS_STROBE 0x08000000ul /* GX/CX */ -#define GEN_TEST_SRC_SS_EN 0x10000000ul /* GX/CX */ -#define GEN_TEST_SRC_SS_STROBE 0x20000000ul /* GX/CX */ -#define GEN_TEST_CNT_VALUE 0x3f000000ul /* 264xT */ -#define GEN_TEST_CC_EN 0x40000000ul /* GX/CX */ -#define GEN_TEST_CC_STROBE 0x80000000ul /* GX/CX */ -/* ? 0xc0000000ul */ /* 264xT */ -#define GEN_DEBUG_MODE 0xff000000ul /* VTB/GTB/LT */ -#define LCD_GEN_CTRL BlockIOTag(0x35u) /* LT */ -#define CRT_ON 0x00000001ul -#define LCD_ON 0x00000002ul -#define HORZ_DIVBY2_EN 0x00000004ul -#define TRISTATE_MEM_EN 0x00000008ul -#define DONT_DS_ICON 0x00000008ul /* LTPro */ -#define LOCK_8DOT 0x00000010ul -#define ICON_ENABLE 0x00000020ul -#define DONT_SHADOW_VPAR 0x00000040ul -#define TOGGLE_EN 0x00000080ul -#define V2CLK_PM_EN 0x00000080ul /* LTPro */ -#define RST_FM 0x00000100ul -#define DISABLE_PCLK_RESET 0x00000200ul /* XC/XL */ -#define DIS_HOR_CRT_DIVBY2 0x00000400ul -#define SCLK_SEL 0x00000800ul -#define SCLK_DELAY 0x0000f000ul -#define MCLK_PM_EN 0x00010000ul -#define TVCLK_PM_EN 0x00010000ul /* LTPro */ -#define VCLK_DAC_PM_EN 0x00020000ul -#define VCLK_LCD_OFF 0x00040000ul -#define SLOWDOWN_XMCLK 0x00080000ul -#define SELECT_WAIT_4MS 0x00080000ul /* LTPro */ -#define XTALIN_PM_EN 0x00080000ul /* XC/XL */ -#define LCD_CLK_RATIO 0x00100000ul -#define V2CLK_DAC_PM_EN 0x00100000ul /* LTPro */ -#define LVDS_EN 0x00200000ul -#define LVDS_PLL_EN 0x00400000ul -#define LVDS_PLL_RESET 0x00800000ul -#define LVDS_RESERVED_BITS 0x07000000ul -#define CRTC_RW_SELECT 0x08000000ul /* LTPro */ -#define USE_SHADOWED_VEND 0x10000000ul -#define USE_SHADOWED_ROWCUR 0x20000000ul -#define SHADOW_EN 0x40000000ul -#define SHADOW_RW_EN 0x80000000ul -#define CUSTOM_MACRO_CNTL BlockIOTag(0x35u) /* GTPro */ -#define POWER_MANAGEMENT BlockIOTag(0x36u) /* LT */ -#define PWR_MGT_ON 0x00000001ul -#define PWR_MGT_MODE 0x00000006ul -#define AUTO_PWRUP_EN 0x00000008ul -#define ACTIVITY_PIN_ON 0x00000010ul -#define STANDBY_POL 0x00000020ul -#define SUSPEND_POL 0x00000040ul -#define SELF_REFRESH 0x00000080ul -#define ACTIVITY_PIN_EN 0x00000100ul -#define KEYBD_SNOOP 0x00000200ul -#define USE_F32KHZ 0x00000400ul /* LTPro */ -#define DONT_USE_XTALIN 0x00000400ul /* XC/XL */ -#define TRISTATE_MEM_EN_P 0x00000800ul /* LTPro */ -#define LCDENG_TEST_MODE 0x0000f000ul -#define STANDBY_COUNT 0x000f0000ul -#define SUSPEND_COUNT 0x00f00000ul -#define BAISON 0x01000000ul -#define BLON 0x02000000ul -#define DIGON 0x04000000ul -#define PM_D3_SUPPORT_ENABLE 0x08000000ul /* XC/XL */ -#define STANDBY_NOW 0x10000000ul -#define SUSPEND_NOW 0x20000000ul -#define PWR_MGT_STATUS 0xc0000000ul -#define CONFIG_CNTL IOPortTag(0x1au, 0x37u) -#define CFG_MEM_AP_SIZE 0x00000003ul -#define CFG_MEM_VGA_AP_EN 0x00000004ul -/* ? 0x00000008ul */ -#define CFG_MEM_AP_LOC 0x00003ff0ul -/* ? 0x0000c000ul */ -#define CFG_CARD_ID 0x00070000ul -#define CFG_VGA_DIS 0x00080000ul -/* ? 0x00f00000ul */ -#define CFG_CDE_WINDOW 0x3f000000ul /* VT/GT */ -/* ? 0xc0000000ul */ -#define CONFIG_CHIP_ID IOPortTag(0x1bu, 0x38u) /* Read */ -#define CFG_CHIP_TYPE0 0x000000fful -#define CFG_CHIP_TYPE1 0x0000ff00ul -#define CFG_CHIP_TYPE 0x0000fffful -#define CFG_CHIP_CLASS 0x00ff0000ul -#define CFG_CHIP_REV 0xff000000ul -#define CFG_CHIP_VERSION 0x07000000ul /* 264xT */ -#define CFG_CHIP_FOUNDRY 0x38000000ul /* 264xT */ -#define CFG_CHIP_REVISION 0xc0000000ul /* 264xT */ -#define CONFIG_STATUS64_0 IOPortTag(0x1cu, 0x39u) /* Read (R/W (264xT)) */ -#define CFG_BUS_TYPE 0x00000007ul /* GX/CX */ -#define CFG_MEM_TYPE_T 0x00000007ul /* 264xT */ -#define CFG_MEM_TYPE 0x00000038ul /* GX/CX */ -#define CFG_DUAL_CAS_EN_T 0x00000008ul /* 264xT */ -#define CFG_ROM_128K_EN 0x00000008ul /* VTB/GTB/LT */ -#define CFG_ROM_REMAP 0x00000008ul /* GTPro */ -#define CFG_VGA_EN_T 0x00000010ul /* VT/GT */ -#define CFG_CLOCK_EN 0x00000020ul /* 264xT */ -#define CFG_DUAL_CAS_EN 0x00000040ul /* GX/CX */ -#define CFG_VMC_SENSE 0x00000040ul /* VT/GT */ -#define CFG_SHARED_MEM_EN 0x00000040ul /* VTB/GTB/LT */ -#define CFG_LOCAL_BUS_OPTION 0x00000180ul /* GX/CX */ -#define CFG_VFC_SENSE 0x00000080ul /* VT/GT */ -#define CFG_INIT_DAC_TYPE 0x00000e00ul /* GX/CX */ -#define CFG_INIT_CARD_ID 0x00007000ul /* GX-C/-D */ -#define CFG_BLK_WR_SIZE 0x00001000ul /* GX-E+ */ -#define CFG_INT_QSF_EN 0x00002000ul /* GX-E+ */ -/* ? 0x00004000ul */ /* GX-E+ */ -/* ? 0x00007000ul */ /* CX */ -#define CFG_TRI_BUF_DIS 0x00008000ul /* GX/CX */ -#define CFG_BOARD_ID 0x0000ff00ul /* VT/GT */ -#define CFG_EXT_RAM_ADDR 0x003f0000ul /* GX/CX */ -#define CFG_PANEL_ID 0x001f0000ul /* LT */ -#define CFG_MACROVISION_EN 0x00200000ul /* GTPro */ -#define CFG_ROM_DIS 0x00400000ul /* GX/CX */ -#define CFG_PCI33EN 0x00400000ul /* GTPro */ -#define CFG_VGA_EN 0x00800000ul /* GX/CX */ -#define CFG_FULLAGP 0x00800000ul /* GTPro */ -#define CFG_ARITHMOS_ENABLE 0x00800000ul /* XC/XL */ -#define CFG_LOCAL_BUS_CFG 0x01000000ul /* GX/CX */ -#define CFG_CHIP_EN 0x02000000ul /* GX/CX */ -#define CFG_LOCAL_READ_DLY_DIS 0x04000000ul /* GX/CX */ -#define CFG_ROM_OPTION 0x08000000ul /* GX/CX */ -#define CFG_BUS_OPTION 0x10000000ul /* GX/CX */ -#define CFG_LOCAL_DAC_WR_EN 0x20000000ul /* GX/CX */ -#define CFG_VLB_RDY_DIS 0x40000000ul /* GX/CX */ -#define CFG_AP_4GBYTE_DIS 0x80000000ul /* GX/CX */ -#define CONFIG_STATUS64_1 IOPortTag(0x1du, 0x3au) /* Read */ -#define CFG_PCI_DAC_CFG 0x00000001ul /* GX/CX */ -/* ? 0x0000001eul */ /* GX/CX */ -#define CFG_1C8_IO_SEL 0x00000020ul /* GX/CX */ -/* ? 0xffffffc0ul */ /* GX/CX */ -#define CRC_SIG 0xfffffffful /* 264xT */ -#define MPP_CONFIG BlockIOTag(0x3bu) /* VTB/GTB/LT */ -#define MPP_PRESCALE 0x00000007ul -/* ? 0x00000008ul */ -#define MPP_NSTATES 0x00000030ul -/* ? 0x00000000ul */ -#define MPP_NSTATES_2 0x00000010ul -#define MPP_NSTATES_4 0x00000020ul -#define MPP_NSTATES_8 0x00000030ul -#define MPP_FORMAT 0x000000c0ul -#define MPP_FORMAT_DO8 0x00000000ul -#define MPP_FORMAT_DO16 0x00000040ul -#define MPP_FORMAT_DA8 0x00000080ul -#define MPP_FORMAT_DA16 0x000000c0ul -#define MPP_WAIT_STATE 0x00000700ul -#define MPP_CHKRDY_EN 0x00000800ul -#define MPP_INSERT_WAIT 0x00001000ul -#define MPP_TRISTATE_ADDR 0x00002000ul -/* ? 0x00004000ul */ -#define MPP_READ_EARLY 0x00008000ul -#define MPP_RW_MODE 0x00030000ul -#define MPP_INT_MASK 0x000c0000ul -#define MPP_AUTO_INC_EN 0x00300000ul -#define MPP_CHKREQ_EN 0x00400000ul -#define MPP_CHKREQ_MODE 0x00800000ul -#define MPP_BUFFER_SIZE 0x03000000ul -#define MPP_BUFFER_MODE 0x0c000000ul -#define MPP_BUFFER_MODE_NORMAL 0x00000000ul -#define MPP_BUFFER_MODE_PREFETCH 0x04000000ul -#define MPP_BUFFER_MODE_BUS_MASTER 0x08000000ul -/* ? 0x0c000000ul */ -/* ? 0x30000000ul */ -#define MPP_BUSY 0x40000000ul -#define MPP_EN 0x80000000ul -#define MPP_STROBE_SEQ BlockIOTag(0x3cu) /* VTB/GTB/LT */ -#define MPP_STB0_SEQ 0x000000fful -#define MPP_STB1_SEQ 0x0000ff00ul -/* ? 0xffff0000ul */ -#define MPP_ADDR BlockIOTag(0x3du) /* VTB/GTB/LT */ -#define MPP_DATA BlockIOTag(0x3eu) /* VTB/GTB/LT */ -#define TVO_CNTL BlockIOTag(0x3fu) /* VTB/GTB/LT */ -#define TVO_H_TOT_PIX 0x00000007ul -#define TVO_PC_OVR_DIS 0x00000008ul -#define TVO_H_TOT_EDGE 0x00000010ul -/* ? 0x00000060ul */ -#define TVO_VBLANK_ONLY 0x00000080ul -/* ? 0x0000ff00ul */ -#define TVO_MPEG_CLR_SRC 0x00030000ul -/* ? 0x1ffc0000ul */ -#define TVO_MPEG_CLK_EN 0x20000000ul -#define TVO_OVERRIDE_EN 0x40000000ul -#define TVO_EN 0x80000000ul -/* GP_IO IOPortTag(0x1eu, 0x1eu) */ /* See above */ -/* CRTC_H_TOTAL_DISP IOPortTag(0x1fu, 0x00u) */ /* Duplicate */ -#define DST_OFF_PITCH BlockIOTag(0x40u) -#define DST_OFFSET 0x000ffffful -/* ? 0x00300000ul */ -#define DST_PITCH 0xffc00000ul -#define DST_X BlockIOTag(0x41u) -#define DST_Y BlockIOTag(0x42u) -#define DST_Y_X BlockIOTag(0x43u) -#define DST_WIDTH BlockIOTag(0x44u) -#define DST_HEIGHT BlockIOTag(0x45u) -#define DST_HEIGHT_WIDTH BlockIOTag(0x46u) -#define DST_X_WIDTH BlockIOTag(0x47u) -#define DST_BRES_LNTH BlockIOTag(0x48u) -#define DST_BRES_ERR BlockIOTag(0x49u) -#define DST_BRES_INC BlockIOTag(0x4au) -#define DST_BRES_DEC BlockIOTag(0x4bu) -#define DST_CNTL BlockIOTag(0x4cu) -#define DST_X_DIR 0x00000001ul -#define DST_Y_DIR 0x00000002ul -#define DST_Y_MAJOR 0x00000004ul -#define DST_X_TILE 0x00000008ul -#define DST_Y_TILE 0x00000010ul -#define DST_LAST_PEL 0x00000020ul -#define DST_POLYGON_EN 0x00000040ul -#define DST_24_ROT_EN 0x00000080ul -#define DST_24_ROT 0x00000700ul -#define DST_BRES_SIGN 0x00000800ul /* GX/CX */ -#define DST_BRES_ZERO 0x00000800ul /* CT */ -#define DST_POLYGON_RTEDGE_DIS 0x00001000ul /* CT */ -#define TRAIL_X_DIR 0x00002000ul /* GT */ -#define TRAP_FILL_DIR 0x00004000ul /* GT */ -#define TRAIL_BRES_SIGN 0x00008000ul /* GT */ -/* ? 0x00010000ul */ -#define BRES_SIGN_AUTO 0x00020000ul /* GT */ -/* ? 0x00040000ul */ -#define ALPHA_OVERLAP_ENB 0x00080000ul /* GTPro */ -#define SUB_PIX_ON 0x00100000ul /* GTPro */ -/* ? 0xffe00000ul */ -/* DST_Y_X BlockIOTag(0x4du) */ /* Duplicate */ -#define TRAIL_BRES_ERR BlockIOTag(0x4eu) /* GT */ -#define TRAIL_BRES_INC BlockIOTag(0x4fu) /* GT */ -#define TRAIL_BRES_DEC BlockIOTag(0x50u) /* GT */ -#define LEAD_BRES_LNTH BlockIOTag(0x51u) /* GT */ -#define Z_OFF_PITCH BlockIOTag(0x52u) /* GT */ -#define Z_CNTL BlockIOTag(0x53u) /* GT */ -#define ALPHA_TST_CNTL BlockIOTag(0x54u) /* GTPro */ -/* ? BlockIOTag(0x55u) */ -#define SECONDARY_STW_EXP BlockIOTag(0x56u) /* GTPro */ -#define SECONDARY_S_X_INC BlockIOTag(0x57u) /* GTPro */ -#define SECONDARY_S_Y_INC BlockIOTag(0x58u) /* GTPro */ -#define SECONDARY_S_START BlockIOTag(0x59u) /* GTPro */ -#define SECONDARY_W_X_INC BlockIOTag(0x5au) /* GTPro */ -#define SECONDARY_W_Y_INC BlockIOTag(0x5bu) /* GTPro */ -#define SECONDARY_W_START BlockIOTag(0x5cu) /* GTPro */ -#define SECONDARY_T_X_INC BlockIOTag(0x5du) /* GTPro */ -#define SECONDARY_T_Y_INC BlockIOTag(0x5eu) /* GTPro */ -#define SECONDARY_T_START BlockIOTag(0x5fu) /* GTPro */ -#define SRC_OFF_PITCH BlockIOTag(0x60u) -#define SRC_OFFSET 0x000ffffful -/* ? 0x00300000ul */ -#define SRC_PITCH 0xffc00000ul -#define SRC_X BlockIOTag(0x61u) -#define SRC_Y BlockIOTag(0x62u) -#define SRC_Y_X BlockIOTag(0x63u) -#define SRC_WIDTH1 BlockIOTag(0x64u) -#define SRC_HEIGHT1 BlockIOTag(0x65u) -#define SRC_HEIGHT1_WIDTH1 BlockIOTag(0x66u) -#define SRC_X_START BlockIOTag(0x67u) -#define SRC_Y_START BlockIOTag(0x68u) -#define SRC_Y_X_START BlockIOTag(0x69u) -#define SRC_WIDTH2 BlockIOTag(0x6au) -#define SRC_HEIGHT2 BlockIOTag(0x6bu) -#define SRC_HEIGHT2_WIDTH2 BlockIOTag(0x6cu) -#define SRC_CNTL BlockIOTag(0x6du) -#define SRC_PATT_EN 0x00000001ul -#define SRC_PATT_ROT_EN 0x00000002ul -#define SRC_LINEAR_EN 0x00000004ul -#define SRC_BYTE_ALIGN 0x00000008ul -#define SRC_LINE_X_DIR 0x00000010ul -#define SRC_8X8X8_BRUSH 0x00000020ul /* VTB/GTB */ -#define FAST_FILL_EN 0x00000040ul /* VTB/GTB */ -#define SRC_TRACK_DST 0x00000080ul /* VTB/GTB */ -#define BUS_MASTER_EN 0x00000100ul /* VTB/GTB */ -#define BUS_MASTER_SYNC 0x00000200ul /* VTB/GTB */ -#define BUS_MASTER_OP 0x00000c00ul /* VTB/GTB */ -#define SRC_8X8X8_BRUSH_LOADED 0x00001000ul /* VTB/GTB */ -#define COLOR_REG_WRITE_EN 0x00002000ul /* VTB/GTB */ -#define BLOCK_WRITE_EN 0x00004000ul /* VTB/GTB */ -/* ? 0xffff8000ul */ -/* ? BlockIOTag(0x6eu) */ -/* ? BlockIOTag(0x6fu) */ -#define SCALE_Y_OFF BlockIOTag(0x70u) /* GT */ -#define SCALE_OFF BlockIOTag(0x70u) /* GTPro */ -#define SECONDARY_SCALE_OFF BlockIOTag(0x70u) /* GTPro */ -#define TEX_0_OFF BlockIOTag(0x70u) /* GT */ -#define TEX_1_OFF BlockIOTag(0x71u) /* GT */ -#define TEX_2_OFF BlockIOTag(0x72u) /* GT */ -#define TEX_3_OFF BlockIOTag(0x73u) /* GT */ -#define TEX_4_OFF BlockIOTag(0x74u) /* GT */ -#define TEX_5_OFF BlockIOTag(0x75u) /* GT */ -#define TEX_6_OFF BlockIOTag(0x76u) /* GT */ -#define SCALE_WIDTH BlockIOTag(0x77u) /* GT */ -#define TEX_7_OFF BlockIOTag(0x77u) /* GT */ -#define SCALE_HEIGHT BlockIOTag(0x78u) /* GT */ -#define TEX_8_OFF BlockIOTag(0x78u) /* GT */ -#define TEX_9_OFF BlockIOTag(0x79u) /* GT */ -#define TEX_10_OFF BlockIOTag(0x7au) /* GT */ -#define S_Y_INC BlockIOTag(0x7bu) /* GT */ -#define SCALE_Y_PITCH BlockIOTag(0x7bu) /* GT */ -#define SCALE_X_INC BlockIOTag(0x7cu) /* GT */ -#define RED_X_INC BlockIOTag(0x7cu) /* GT */ -#define GREEN_X_INC BlockIOTag(0x7du) /* GT */ -#define SCALE_Y_INC BlockIOTag(0x7du) /* GT */ -#define SCALE_VACC BlockIOTag(0x7eu) /* GT */ -#define SCALE_3D_CNTL BlockIOTag(0x7fu) /* GT */ -#define HOST_DATA_0 BlockIOTag(0x80u) -#define HOST_DATA_1 BlockIOTag(0x81u) -#define HOST_DATA_2 BlockIOTag(0x82u) -#define HOST_DATA_3 BlockIOTag(0x83u) -#define HOST_DATA_4 BlockIOTag(0x84u) -#define HOST_DATA_5 BlockIOTag(0x85u) -#define HOST_DATA_6 BlockIOTag(0x86u) -#define HOST_DATA_7 BlockIOTag(0x87u) -#define HOST_DATA_8 BlockIOTag(0x88u) -#define HOST_DATA_9 BlockIOTag(0x89u) -#define HOST_DATA_A BlockIOTag(0x8au) -#define HOST_DATA_B BlockIOTag(0x8bu) -#define HOST_DATA_C BlockIOTag(0x8cu) -#define HOST_DATA_D BlockIOTag(0x8du) -#define HOST_DATA_E BlockIOTag(0x8eu) -#define HOST_DATA_F BlockIOTag(0x8fu) -#define HOST_CNTL BlockIOTag(0x90u) -#define HOST_BYTE_ALIGN 0x00000001ul -#define HOST_BIG_ENDIAN_EN 0x00000002ul /* GX-E/CT */ -/* ? 0xfffffffcul */ -#define BM_HOSTDATA BlockIOTag(0x91u) /* VTB/GTB */ -#define BM_ADDR BlockIOTag(0x92u) /* VTB/GTB */ -#define BM_DATA BlockIOTag(0x92u) /* VTB/GTB */ -#define BM_GUI_TABLE_CMD BlockIOTag(0x93u) /* GTPro */ -/* ? BlockIOTag(0x94u) */ -/* ? BlockIOTag(0x95u) */ -/* ? BlockIOTag(0x96u) */ -/* ? BlockIOTag(0x97u) */ -/* ? BlockIOTag(0x98u) */ -/* ? BlockIOTag(0x99u) */ -/* ? BlockIOTag(0x9au) */ -/* ? BlockIOTag(0x9bu) */ -/* ? BlockIOTag(0x9cu) */ -/* ? BlockIOTag(0x9du) */ -/* ? BlockIOTag(0x9eu) */ -/* ? BlockIOTag(0x9fu) */ -#define PAT_REG0 BlockIOTag(0xa0u) -#define PAT_REG1 BlockIOTag(0xa1u) -#define PAT_CNTL BlockIOTag(0xa2u) -#define PAT_MONO_EN 0x00000001ul -#define PAT_CLR_4x2_EN 0x00000002ul -#define PAT_CLR_8x1_EN 0x00000004ul -/* ? 0xfffffff8ul */ -/* ? BlockIOTag(0xa3u) */ -/* ? BlockIOTag(0xa4u) */ -/* ? BlockIOTag(0xa5u) */ -/* ? BlockIOTag(0xa6u) */ -/* ? BlockIOTag(0xa7u) */ -#define SC_LEFT BlockIOTag(0xa8u) -#define SC_RIGHT BlockIOTag(0xa9u) -#define SC_LEFT_RIGHT BlockIOTag(0xaau) -#define SC_TOP BlockIOTag(0xabu) -#define SC_BOTTOM BlockIOTag(0xacu) -#define SC_TOP_BOTTOM BlockIOTag(0xadu) -#define USR1_DST_OFF_PITCH BlockIOTag(0xaeu) /* LTPro */ -#define USR2_DST_OFF_PITCH BlockIOTag(0xafu) /* LTPro */ -#define DP_BKGD_CLR BlockIOTag(0xb0u) -#define DP_FRGD_CLR BlockIOTag(0xb1u) -#define DP_WRITE_MASK BlockIOTag(0xb2u) -#define DP_CHAIN_MASK BlockIOTag(0xb3u) -#define DP_CHAIN_1BPP 0x00000000ul /* Irrelevant */ -#define DP_CHAIN_4BPP 0x00008888ul -#define DP_CHAIN_8BPP 0x00008080ul -#define DP_CHAIN_8BPP_332 0x00009292ul -#define DP_CHAIN_15BPP_1555 0x00004210ul -#define DP_CHAIN_16BPP_565 0x00008410ul -#define DP_CHAIN_24BPP_888 0x00008080ul -#define DP_CHAIN_32BPP_8888 0x00008080ul -/* ? 0xffff0000ul */ -#define DP_PIX_WIDTH BlockIOTag(0xb4u) -#define DP_DST_PIX_WIDTH 0x0000000ful -#define COMPOSITE_PIX_WIDTH 0x000000f0ul /* GTPro */ -#define DP_SRC_PIX_WIDTH 0x00000f00ul -/* ? 0x00001000ul */ -#define DP_HOST_TRIPLE_EN 0x00002000ul /* GT2c/VT4 */ -#define DP_SRC_AUTONA_FIX_DIS 0x00004000ul /* GTB */ -#define DP_FAST_SRCCOPY_DIS 0x00008000ul /* GTB */ -#define DP_HOST_PIX_WIDTH 0x000f0000ul -#define DP_CI4_RGB_INDEX 0x00f00000ul /* GTB */ -#define DP_BYTE_PIX_ORDER 0x01000000ul -#define DP_CONVERSION_TEMP 0x02000000ul /* GTB */ -#define DP_CI4_RGB_LOW_NIBBLE 0x04000000ul /* GTB */ -#define DP_C14_RGB_HIGH_NIBBLE 0x08000000ul /* GTB */ -#define DP_SCALE_PIX_WIDTH 0xf0000000ul /* GTB */ -#define DP_MIX BlockIOTag(0xb5u) -#define DP_BKGD_MIX 0x0000001ful -/* ? 0x0000ffe0ul */ -#define DP_FRGD_MIX 0x001f0000ul -/* ? 0xffe00000ul */ -#define DP_SRC BlockIOTag(0xb6u) -#define DP_BKGD_SRC 0x00000007ul -/* ? 0x000000feul */ -#define DP_FRGD_SRC 0x00000700ul -/* ? 0x0000fe00ul */ -#define DP_MONO_SRC 0x00030000ul -#define DP_MONO_SRC_ALLONES 0x00000000ul -#define DP_MONO_SRC_PATTERN 0x00010000ul -#define DP_MONO_SRC_HOST 0x00020000ul -#define DP_MONO_SRC_BLIT 0x00030000ul -/* ? 0xfffc0000ul */ -#define DP_FRGD_CLR_MIX BlockIOTag(0xb7u) /* VTB/GTB */ -#define DP_FRGD_BKGD_CLR BlockIOTag(0xb8u) /* VTB/GTB */ -/* ? BlockIOTag(0xb9u) */ -#define DST_X_Y BlockIOTag(0xbau) /* VTB/GTB */ -#define DST_WIDTH_HEIGHT BlockIOTag(0xbbu) /* VTB/GTB */ -#define USR_DST_PITCH BlockIOTag(0xbcu) /* GTPro */ -/* ? BlockIOTag(0xbdu) */ -#define DP_SET_GUI_ENGINE2 BlockIOTag(0xbeu) /* GTPro */ -#define DP_SET_GUI_ENGINE BlockIOTag(0xbfu) /* VTB/GTB */ -#define CLR_CMP_CLR BlockIOTag(0xc0u) -#define CLR_CMP_MSK BlockIOTag(0xc1u) -#define CLR_CMP_CNTL BlockIOTag(0xc2u) -#define CLR_CMP_FN 0x00000007ul -#define CLR_CMP_FN_FALSE 0x00000000ul -#define CLR_CMP_FN_TRUE 0x00000001ul -/* ? 0x00000002ul */ -/* ? 0x00000003ul */ -#define CLR_CMP_FN_NOT_EQUAL 0x00000004ul -#define CLR_CMP_FN_EQUAL 0x00000005ul -/* ? 0x00000006ul */ -/* ? 0x00000007ul */ -/* ? 0x00fffff8ul */ -#define CLR_CMP_SRC 0x03000000ul -#define CLR_CMP_SRC_DST 0x00000000ul -#define CLR_CMP_SRC_2D 0x01000000ul -#define CLR_CMP_SRC_TEXEL 0x02000000ul -/* ? 0x03000000ul */ -/* ? 0xfc000000ul */ -/* ? BlockIOTag(0xc3u) */ -#define FIFO_STAT BlockIOTag(0xc4u) -#define FIFO_STAT_BITS 0x0000fffful -/* ? 0x7fff0000ul */ -#define FIFO_ERR 0x80000000ul -/* ? BlockIOTag(0xc5u) */ -/* ? BlockIOTag(0xc6u) */ -/* ? BlockIOTag(0xc7u) */ -#define CONTEXT_MASK BlockIOTag(0xc8u) -/* ? BlockIOTag(0xc9u) */ -/* ? BlockIOTag(0xcau) */ -#define CONTEXT_LOAD_CNTL BlockIOTag(0xcbu) -#define CONTEXT_LOAD_PTR 0x00007ffful -/* ? 0x00008000ul */ -#define CONTEXT_LOAD_CMD 0x00030000ul -#define CONTEXT_LOAD_NONE 0x00000000ul -#define CONTEXT_LOAD_ONLY 0x00010000ul -#define CONTEXT_LOAD_FILL 0x00020000ul -#define CONTEXT_LOAD_LINE 0x00030000ul -/* ? 0x7ffc0000ul */ -#define CONTEXT_LOAD_DIS 0x80000000ul -#define GUI_TRAJ_CNTL BlockIOTag(0xccu) -/* ? BlockIOTag(0xcdu) */ -#define GUI_STAT BlockIOTag(0xceu) -#define GUI_ACTIVE 0x00000001ul -/* ? 0x000000feul */ -#define DSTX_LT_SCISSOR_LEFT 0x00000100ul -#define DSTX_GT_SCISSOR_RIGHT 0x00000200ul -#define DSTY_LT_SCISSOR_TOP 0x00000400ul -#define DSTY_GT_SCISSOR_BOTTOM 0x00000800ul -/* ? 0x0000f000ul */ -#define GUI_FIFO 0x03ff0000ul /* VTB/GTB */ -/* ? 0xfc000000ul */ -/* ? BlockIOTag(0xcfu) */ -#define S_X_INC2 BlockIOTag(0xd0u) /* GTB */ -#define TEX_PALETTE_INDEX BlockIOTag(0xd0u) /* GTPro */ -#define S_Y_INC2 BlockIOTag(0xd1u) /* GTB */ -#define STW_EXP BlockIOTag(0xd1u) /* GTPro */ -#define S_XY_INC2 BlockIOTag(0xd2u) /* GTB */ -#define LOG_MAX_INC BlockIOTag(0xd2u) /* GTPro */ -#define S_XINC_START BlockIOTag(0xd3u) /* GTB */ -/* S_Y_INC BlockIOTag(0xd4u) */ /* Duplicate */ -/* SCALE_Y_PITCH BlockIOTag(0xd4u) */ /* Duplicate */ -#define S_START BlockIOTag(0xd5u) /* GTB */ -#define T_X_INC2 BlockIOTag(0xd6u) /* GTB */ -#define W_X_INC BlockIOTag(0xd6u) /* GTPro */ -#define T_Y_INC2 BlockIOTag(0xd7u) /* GTB */ -#define W_Y_INC BlockIOTag(0xd7u) /* GTPro */ -#define T_XY_INC2 BlockIOTag(0xd8u) /* GTB */ -#define W_START BlockIOTag(0xd8u) /* GTPro */ -#define T_XINC_START BlockIOTag(0xd9u) /* GTB */ -#define T_Y_INC BlockIOTag(0xdau) /* GTB */ -#define SECONDARY_SCALE_PITCH BlockIOTag(0xdau) /* GTPro */ -#define T_START BlockIOTag(0xdbu) /* GTB */ -#define TEX_SIZE_PITCH BlockIOTag(0xdcu) /* GTB */ -#define TEX_CNTL BlockIOTag(0xddu) /* GTPro */ -#define SECONDARY_TEX_OFFSET BlockIOTag(0xdeu) /* GTPro */ -#define TEX_PAL_WR BlockIOTag(0xdfu) /* GTB */ -#define TEX_PALETTE BlockIOTag(0xdfu) /* GTPro */ -#define SCALE_PITCH_BOTH BlockIOTag(0xe0u) /* GTPro */ -#define SECONDARY_SCALE_OFF_ACC BlockIOTag(0xe1u) /* GTPro */ -#define SCALE_OFF_ACC BlockIOTag(0xe2u) /* GTPro */ -#define SCALE_DST_Y_X BlockIOTag(0xe3u) /* GTPro */ -/* ? BlockIOTag(0xe4u) */ -/* ? BlockIOTag(0xe5u) */ -#define COMPOSITE_SHADOW_ID BlockIOTag(0xe6u) /* GTPro */ -#define SECONDARY_SCALE_X_INC BlockIOTag(0xe7u) /* GTPro */ -#define SPECULAR_RED_X_INC BlockIOTag(0xe7u) /* GTPro */ -#define SPECULAR_RED_Y_INC BlockIOTag(0xe8u) /* GTPro */ -#define SPECULAR_RED_START BlockIOTag(0xe9u) /* GTPro */ -#define SECONDARY_SCALE_HACC BlockIOTag(0xe9u) /* GTPro */ -#define SPECULAR_GREEN_X_INC BlockIOTag(0xeau) /* GTPro */ -#define SPECULAR_GREEN_Y_INC BlockIOTag(0xebu) /* GTPro */ -#define SPECULAR_GREEN_START BlockIOTag(0xecu) /* GTPro */ -#define SPECULAR_BLUE_X_INC BlockIOTag(0xedu) /* GTPro */ -#define SPECULAR_BLUE_Y_INC BlockIOTag(0xeeu) /* GTPro */ -#define SPECULAR_BLUE_START BlockIOTag(0xefu) /* GTPro */ -/* SCALE_X_INC BlockIOTag(0xf0u) */ /* Duplicate */ -/* RED_X_INC BlockIOTag(0xf0u) */ /* Duplicate */ -#define RED_Y_INC BlockIOTag(0xf1u) /* GTB */ -#define SCALE_HACC BlockIOTag(0xf2u) /* GTB */ -#define RED_START BlockIOTag(0xf2u) /* GTB */ -/* GREEN_X_INC BlockIOTag(0xf3u) */ /* Duplicate */ -/* SCALE_Y_INC BlockIOTag(0xf3u) */ /* Duplicate */ -#define GREEN_Y_INC BlockIOTag(0xf4u) /* GTB */ -#define SECONDARY_SCALE_Y_INC BlockIOTag(0xf4u) /* GTPro */ -#define SECONDARY_SCALE_VACC BlockIOTag(0xf5u) /* GTPro */ -#define GREEN_START BlockIOTag(0xf5u) /* GTB */ -#define BLUE_X_INC BlockIOTag(0xf6u) /* GTB */ -#define SCALE_XUV_INC BlockIOTag(0xf6u) /* GTB */ -#define BLUE_Y_INC BlockIOTag(0xf7u) /* GTB */ -#define BLUE_START BlockIOTag(0xf8u) /* GTB */ -#define SCALE_UV_HACC BlockIOTag(0xf8u) /* GTB */ -#define Z_X_INC BlockIOTag(0xf9u) /* GTB */ -#define Z_Y_INC BlockIOTag(0xfau) /* GTB */ -#define Z_START BlockIOTag(0xfbu) /* GTB */ -#define ALPHA_FOG_X_INC BlockIOTag(0xfcu) /* GTB */ -#define ALPHA_FOG_Y_INC BlockIOTag(0xfdu) /* GTB */ -#define ALPHA_FOG_START BlockIOTag(0xfeu) /* GTB */ -/* ? BlockIOTag(0xffu) */ -#define OVERLAY_Y_X_START BlockIOTag(0x100u) -#define OVERLAY_Y_START 0x000003fful -/* ? 0x0000fc00ul */ -#define OVERLAY_X_START 0x03ff0000ul -/* ? 0x7c000000ul */ -#define OVERLAY_LOCK_START 0x80000000ul -#define OVERLAY_Y_X_END BlockIOTag(0x101u) -#define OVERLAY_Y_END 0x000003fful -/* ? 0x0000fc00ul */ -#define OVERLAY_X_END 0x03ff0000ul -/* ? 0x7c000000ul */ -#define OVERLAY_LOCK_END 0x80000000ul -#define OVERLAY_VIDEO_KEY_CLR BlockIOTag(0x102u) -#define OVERLAY_VIDEO_KEY_MSK BlockIOTag(0x103u) -#define OVERLAY_GRAPHICS_KEY_CLR BlockIOTag(0x104u) -#define OVERLAY_GRAPHICS_KEY_MSK BlockIOTag(0x105u) -#define OVERLAY_KEY_CNTL BlockIOTag(0x106u) -#define OVERLAY_VIDEO_FN 0x00000007ul -/* ? 0x00000008ul */ -#define OVERLAY_GRAPHICS_FN 0x00000070ul -/* ? 0x00000080ul */ -#define OVERLAY_CMP_MIX 0x00000100ul -/* ? 0xfffffe00ul */ -/* ? BlockIOTag(0x107u) */ -#define OVERLAY_SCALE_INC BlockIOTag(0x108u) -#define OVERLAY_SCALE_CNTL BlockIOTag(0x109u) -#define SCALE_PIX_EXPAND 0x00000001ul -#define SCALE_Y2R_TEMP 0x00000002ul -#define SCALE_HORZ_MODE 0x00000004ul -#define SCALE_VERT_MODE 0x00000008ul -#define SCALE_SIGNED_UV 0x00000010ul -#define SCALE_GAMMA_SEL 0x00000060ul -/* ? 0x03ffff80ul */ -#define SCALE_BANDWIDTH 0x04000000ul -#define SCALE_DIS_LIMIT 0x08000000ul -/* ? 0x10000000ul */ -#define SCALE_CLK_FORCE_ON 0x20000000ul -#define OVERLAY_EN 0x40000000ul -#define SCALE_EN 0x80000000ul -#define SCALER_HEIGHT_WIDTH BlockIOTag(0x10au) -#define SCALER_TEST BlockIOTag(0x10bu) -/* ? 0x00000001ul */ -#define SCALE_Y2R_DIS 0x00000002ul -/* ? 0xfffffffcul */ -#define SCALER_THRESHOLD BlockIOTag(0x10cu) -#define SCALER_BUF0_OFFSET BlockIOTag(0x10du) /* VTB/GTB */ -#define SCALER_BUF1_OFFSET BlockIOTag(0x10eu) /* VTB/GTB */ -#define SCALER_BUF_PITCH BlockIOTag(0x10fu) /* VTB/GTB */ -#define CAPTURE_Y_X BlockIOTag(0x110u) -#define CAPTURE_START_END BlockIOTag(0x110u) /* VTB/GTB */ -#define CAPTURE_HEIGHT_WIDTH BlockIOTag(0x111u) -#define CAPTURE_X_WIDTH BlockIOTag(0x111u) /* VTB/GTB */ -#define VIDEO_FORMAT BlockIOTag(0x112u) -#define VIDEO_IN 0x0000000ful -/* ? 0x00000000ul */ -/* ? 0x00000001ul */ -/* ? 0x00000002ul */ -/* ? 0x00000003ul */ -/* ? 0x00000004ul */ -/* ? 0x00000005ul */ -/* ? 0x00000006ul */ -/* ? 0x00000007ul */ -/* ? 0x00000008ul */ -/* ? 0x00000009ul */ -/* ? 0x0000000aul */ -#define VIDEO_IN_VYUY422 0x0000000bul -#define VIDEO_IN_YVYU422 0x0000000cul -/* ? 0x0000000dul */ -/* ? 0x0000000eul */ -/* ? 0x0000000ful */ -#define VIDEO_SIGNED_UV 0x00000010ul -/* ? 0x0000ffe0ul */ -#define SCALER_IN 0x000f0000ul -/* ? 0x00000000ul */ -/* ? 0x00010000ul */ -/* ? 0x00020000ul */ -#define SCALER_IN_15BPP 0x00030000ul -#define SCALER_IN_16BPP 0x00040000ul -/* ? 0x00050000ul */ -#define SCALER_IN_32BPP 0x00060000ul -/* ? 0x00070000ul */ -/* ? 0x00080000ul */ -#define SCALER_IN_YUV9 0x00090000ul -#define SCALER_IN_YUV12 0x000a0000ul -#define SCALER_IN_VYUY422 0x000b0000ul -#define SCALER_IN_YVYU422 0x000c0000ul -/* ? 0x000d0000ul */ -/* ? 0x000e0000ul */ -/* ? 0x000f0000ul */ -/* ? 0x0ff00000ul */ -#define HOST_BYTE_SHIFT_EN 0x10000000ul -#define HOST_YUV_APER 0x20000000ul -#define HOST_MEM_MODE 0xc0000000ul -#define HOST_MEM_MODE_NORMAL 0x00000000ul -#define HOST_MEM_MODE_Y 0x40000000ul -#define HOST_MEM_MODE_U 0x80000000ul -#define HOST_MEM_MODE_V 0xc0000000ul -#define VIDEO_CONFIG BlockIOTag(0x113u) -#define VBI_START_END BlockIOTag(0x113u) /* VTB/GTB */ -#define CAPTURE_CONFIG BlockIOTag(0x114u) -#define CAP_INPUT_MODE 0x00000001ul -#define CAP_START_FIELD 0x00000002ul -#define CAP_BUF_MODE 0x00000004ul -#define CAP_START_BUF 0x00000008ul -#define CAP_BUF_TYPE 0x00000030ul -#define CAP_BUF_FIELD 0x00000000ul -#define CAP_BUF_ALTERNATING 0x00000010ul -#define CAP_BUF_FRAME 0x00000020ul -/* ? 0x00000030ul */ -#define CAP_FIELD_FLIP 0x00000040ul -#define CAP_CCIR656_EN 0x00000080ul -/* ? 0x00000f00ul */ -#define CAP_MIRROR_EN 0x00001000ul -#define ONESHOT_MIRROR_EN 0x00002000ul -#define ONESHOT_MODE 0x00004000ul -/* ? 0x00008000ul */ -#define CAP_HORZ_DOWN 0x00030000ul -#define CAP_VERT_DOWN 0x000c0000ul -#define ONESHOT_HORZ_DOWN 0x00300000ul -#define ONESHOT_VERT_DOWN 0x00c00000ul -/* ? 0x0f000000ul */ -#define OVL_BUF_MODE 0x10000000ul -#define OVL_BUF_NEXT 0x20000000ul -/* ? 0xc0000000ul */ -#define TRIG_CNTL BlockIOTag(0x115u) -#define CAP_TRIGGER 0x00000003ul -#define CAP_TRIGGER_NEXT 0x00000001ul -/* ? 0x0000001cul */ -#define OVL_CUR_BUF 0x00000020ul -#define OVL_BUF_STATUS 0x00000040ul -#define CAP_BUF_STATUS 0x00000080ul -/* ? 0x7fffff00ul */ -#define CAPTURE_EN 0x80000000ul -#define VIDEO_SYNC_TEST BlockIOTag(0x116u) -#define OVERLAY_EXCLUSIVE_HORZ BlockIOTag(0x116u) /* VTB/GTB */ -#define EXCLUSIVE_HORZ_START 0x000000fful -#define EXCLUSIVE_HORZ_END 0x0000ff00ul -#define EXCLUSIVE_HORZ_PORCH 0x00ff0000ul -/* ? 0x7f000000ul */ -#define EXCLUSIVE_EN 0x80000000ul -#define EXT_CRTC_GEN_CNTL_R BlockIOTag(0x117u) /* VT-A4 (R) */ -#define OVERLAY_EXCLUSIVE_VERT BlockIOTag(0x117u) /* VTB/GTB */ -#define EXCLUSIVE_VERT_START 0x000003fful -/* ? 0x0000fc00ul */ -#define EXCLUSIVE_VERT_END 0x03ff0000ul -/* ? 0xfc000000ul */ -#define VMC_CONFIG BlockIOTag(0x118u) -#define VBI_WIDTH BlockIOTag(0x118u) /* VTB/GTB */ -#define VMC_STATUS BlockIOTag(0x119u) -#define CAPTURE_DEBUG BlockIOTag(0x119u) /* VTB/GTB */ -#define VMC_CMD BlockIOTag(0x11au) -#define VIDEO_SYNC_TEST_B BlockIOTag(0x11au) /* VTB/GTB */ -#define VMC_ARG0 BlockIOTag(0x11bu) -#define VMC_ARG1 BlockIOTag(0x11cu) -#define SNAPSHOT_VH_COUNTS BlockIOTag(0x11cu) /* GTPro */ -#define VMC_SNOOP_ARG0 BlockIOTag(0x11du) -#define SNAPSHOT_F_COUNT BlockIOTag(0x11du) /* GTPro */ -#define VMC_SNOOP_ARG1 BlockIOTag(0x11eu) -#define N_VIF_COUNT BlockIOTag(0x11eu) /* GTPro */ -#define SNAPSHOT_VIF_COUNT BlockIOTag(0x11fu) /* GTPro */ -#define BUF0_OFFSET BlockIOTag(0x120u) -#define CAPTURE_BUF0_OFFSET BlockIOTag(0x120u) /* VTB/GTB */ -#define CAPTURE_BUF1_OFFSET BlockIOTag(0x121u) /* VTB/GTB */ -#define ONESHOT_BUF_OFFSET BlockIOTag(0x122u) /* VTB/GTB */ -#define BUF0_PITCH BlockIOTag(0x123u) -/* ? BlockIOTag(0x124u) */ -/* ? BlockIOTag(0x125u) */ -#define BUF1_OFFSET BlockIOTag(0x126u) -/* ? BlockIOTag(0x127u) */ -/* ? BlockIOTag(0x128u) */ -#define BUF1_PITCH BlockIOTag(0x129u) -/* ? BlockIOTag(0x12au) */ -#define BUF0_CAP_ODD_OFFSET BlockIOTag(0x12bu) -#define BUF1_CAP_ODD_OFFSET BlockIOTag(0x12cu) -#define SNAPSHOT2_VH_COUNTS BlockIOTag(0x12cu) /* LTPro */ -#define SNAPSHOT2_F_COUNT BlockIOTag(0x12du) /* LTPro */ -#define N_VIF2_COUNT BlockIOTag(0x12eu) /* LTPro */ -#define SNAPSHOT2_VIF_COUNT BlockIOTag(0x12fu) /* LTPro */ -#define VMC_STRM_DATA_0 BlockIOTag(0x130u) -/* MPP_CONFIG BlockIOTag(0x130u) */ /* See 0x3bu */ -#define VMC_STRM_DATA_1 BlockIOTag(0x131u) -/* MPP_STROBE_SEQ BlockIOTag(0x131u) */ /* See 0x3cu */ -#define VMC_STRM_DATA_2 BlockIOTag(0x132u) -/* MPP_ADDR BlockIOTag(0x132u) */ /* See 0x3du */ -#define VMC_STRM_DATA_3 BlockIOTag(0x133u) -/* MPP_DATA BlockIOTag(0x133u) */ /* See 0x3eu */ -#define VMC_STRM_DATA_4 BlockIOTag(0x134u) -#define VMC_STRM_DATA_5 BlockIOTag(0x135u) -#define VMC_STRM_DATA_6 BlockIOTag(0x136u) -#define VMC_STRM_DATA_7 BlockIOTag(0x137u) -#define VMC_STRM_DATA_8 BlockIOTag(0x138u) -#define VMC_STRM_DATA_9 BlockIOTag(0x139u) -#define VMC_STRM_DATA_A BlockIOTag(0x13au) -#define VMC_STRM_DATA_B BlockIOTag(0x13bu) -#define VMC_STRM_DATA_C BlockIOTag(0x13cu) -#define VMC_STRM_DATA_D BlockIOTag(0x13du) -#define VMC_STRM_DATA_E BlockIOTag(0x13eu) -#define VMC_STRM_DATA_F BlockIOTag(0x13fu) -/* TVO_CNTL BlockIOTag(0x140u) */ /* See 0x3fu */ -/* ? BlockIOTag(0x141u) */ -/* ? BlockIOTag(0x142u) */ -/* ? BlockIOTag(0x143u) */ -/* ? BlockIOTag(0x144u) */ -/* ? BlockIOTag(0x145u) */ -/* ? BlockIOTag(0x146u) */ -/* ? BlockIOTag(0x147u) */ -/* ? BlockIOTag(0x148u) */ -/* ? BlockIOTag(0x149u) */ -/* ? BlockIOTag(0x14au) */ -/* ? BlockIOTag(0x14bu) */ -/* ? BlockIOTag(0x14cu) */ -/* ? BlockIOTag(0x14du) */ -/* ? BlockIOTag(0x14eu) */ -/* ? BlockIOTag(0x14fu) */ -/* ? BlockIOTag(0x150u) */ -#define CRT_HORZ_VERT_LOAD BlockIOTag(0x151u) /* VTB/GTB */ -#define AGP_BASE BlockIOTag(0x152u) /* GTPro */ -#define AGP_CNTL BlockIOTag(0x153u) /* GTPro */ -#define AGP_MODE_1X 0x00000001ul -#define AGP_MODE_2X 0x00000002ul -#define AGP_MODE_MASK 0x00000003ul -#define AGP_APER_SIZE_MASK 0x0000003ful -#define AGP_APER_SIZE_4MB 0x0000003ful -#define AGP_APER_SIZE_8MB 0x0000003eul -#define AGP_APER_SIZE_16MB 0x0000003cul -#define AGP_APER_SIZE_32MB 0x00000038ul -#define AGP_APER_SIZE_64MB 0x00000030ul -#define AGP_APER_SIZE_128MB 0x00000020ul -#define AGP_APER_SIZE_256MB 0x00000000ul -#define HIGH_PRIORITY_READ_EN 0x00010000ul -#define AGP_TRDY_MODE 0x00020000ul -#define SCALER_COLOUR_CNTL BlockIOTag(0x154u) /* GTPro */ -#define SCALE_BRIGHTNESS 0x0000007ful -/* ? 0x00000080ul */ -#define SCALE_SATURATION_U 0x00001f00ul -/* ? 0x0000e000ul */ -#define SCALE_SATURATION_V 0x001f0000ul -#define SCALE_VERT_ADJ_UV 0x0fe00000ul -#define SCALE_HORZ_ADJ_UV 0xf0000000ul -#define SCALER_H_COEFF0 BlockIOTag(0x155u) /* GTPro */ -#define SCALER_H_COEFF1 BlockIOTag(0x156u) /* GTPro */ -#define SCALER_H_COEFF2 BlockIOTag(0x157u) /* GTPro */ -#define SCALER_H_COEFF3 BlockIOTag(0x158u) /* GTPro */ -#define SCALER_H_COEFF4 BlockIOTag(0x159u) /* GTPro */ -/* ? BlockIOTag(0x15au) */ -/* ? BlockIOTag(0x15bu) */ -#define GUI_CMDFIFO_DEBUG BlockIOTag(0x15cu) /* GT2c/VT4 */ -#define GUI_CMDFIFO_DATA BlockIOTag(0x15du) /* GT2c/VT4 */ -#define GUI_CNTL BlockIOTag(0x15eu) /* GT2c/VT4 */ -#define CMDFIFO_SIZE_MODE 0x00000003ul -/* ? 0x0000fffcul */ -#define IDCT_PRSR_MODE 0x00010000ul /* XL/XC */ -#define IDCT_BLOCK_GUI_INITIATOR 0x00020000ul /* XL/XC */ -/* ? 0xfffc0000ul */ -/* ? BlockIOTag(0x15fu) */ -#define BM_FRAME_BUF_OFFSET BlockIOTag(0x160u) /* VTB/GTB */ -#define BM_SYSTEM_MEM_ADDR BlockIOTag(0x161u) /* VTB/GTB */ -#define BM_COMMAND BlockIOTag(0x162u) /* VTB/GTB */ -#define BM_STATUS BlockIOTag(0x163u) /* VTB/GTB */ -/* ? BlockIOTag(0x164u) */ -/* ? BlockIOTag(0x165u) */ -/* ? BlockIOTag(0x166u) */ -/* ? BlockIOTag(0x167u) */ -/* ? BlockIOTag(0x168u) */ -/* ? BlockIOTag(0x169u) */ -/* ? BlockIOTag(0x16au) */ -/* ? BlockIOTag(0x16bu) */ -/* ? BlockIOTag(0x16cu) */ -/* ? BlockIOTag(0x16du) */ -#define BM_GUI_TABLE BlockIOTag(0x16eu) /* VTB/GTB */ -#define BM_SYSTEM_TABLE BlockIOTag(0x16fu) /* VTB/GTB */ -/* ? BlockIOTag(0x170u) */ -/* ? BlockIOTag(0x171u) */ -/* ? BlockIOTag(0x172u) */ -/* ? BlockIOTag(0x173u) */ -/* ? BlockIOTag(0x174u) */ -#define SCALER_BUF0_OFFSET_U BlockIOTag(0x175u) /* GTPro */ -#define SCALER_BUF0_OFFSET_V BlockIOTag(0x176u) /* GTPro */ -#define SCALER_BUF1_OFFSET_U BlockIOTag(0x177u) /* GTPro */ -#define SCALER_BUF1_OFFSET_V BlockIOTag(0x178u) /* GTPro */ -/* ? BlockIOTag(0x179u) */ -/* ? BlockIOTag(0x17au) */ -/* ? BlockIOTag(0x17bu) */ -/* ? BlockIOTag(0x17cu) */ -/* ? BlockIOTag(0x17du) */ -/* ? BlockIOTag(0x17eu) */ -/* ? BlockIOTag(0x17fu) */ -/* ? BlockIOTag(0x180u) */ -/* ? BlockIOTag(0x181u) */ -/* ? BlockIOTag(0x182u) */ -/* ? BlockIOTag(0x183u) */ -/* ? BlockIOTag(0x184u) */ -/* ? BlockIOTag(0x185u) */ -/* ? BlockIOTag(0x186u) */ -/* ? BlockIOTag(0x187u) */ -/* ? BlockIOTag(0x188u) */ -/* ? BlockIOTag(0x189u) */ -/* ? BlockIOTag(0x18au) */ -/* ? BlockIOTag(0x18bu) */ -/* ? BlockIOTag(0x18cu) */ -/* ? BlockIOTag(0x18du) */ -/* ? BlockIOTag(0x18eu) */ -/* ? BlockIOTag(0x18fu) */ -#define VERTEX_1_S BlockIOTag(0x190u) /* GTPro */ -#define VERTEX_1_T BlockIOTag(0x191u) /* GTPro */ -#define VERTEX_1_W BlockIOTag(0x192u) /* GTPro */ -#define VERTEX_1_SPEC_ARGB BlockIOTag(0x193u) /* GTPro */ -#define VERTEX_1_Z BlockIOTag(0x194u) /* GTPro */ -#define VERTEX_1_ARGB BlockIOTag(0x195u) /* GTPro */ -#define VERTEX_1_X_Y BlockIOTag(0x196u) /* GTPro */ -#define ONE_OVER_AREA BlockIOTag(0x197u) /* GTPro */ -#define VERTEX_2_S BlockIOTag(0x198u) /* GTPro */ -#define VERTEX_2_T BlockIOTag(0x199u) /* GTPro */ -#define VERTEX_2_W BlockIOTag(0x19au) /* GTPro */ -#define VERTEX_2_SPEC_ARGB BlockIOTag(0x19bu) /* GTPro */ -#define VERTEX_2_Z BlockIOTag(0x19cu) /* GTPro */ -#define VERTEX_2_ARGB BlockIOTag(0x19du) /* GTPro */ -#define VERTEX_2_X_Y BlockIOTag(0x19eu) /* GTPro */ -/* ONE_OVER_AREA BlockIOTag(0x19fu) */ /* Duplicate */ -#define VERTEX_3_S BlockIOTag(0x1a0u) /* GTPro */ -#define VERTEX_3_T BlockIOTag(0x1a1u) /* GTPro */ -#define VERTEX_3_W BlockIOTag(0x1a2u) /* GTPro */ -#define VERTEX_3_SPEC_ARGB BlockIOTag(0x1a3u) /* GTPro */ -#define VERTEX_3_Z BlockIOTag(0x1a4u) /* GTPro */ -#define VERTEX_3_ARGB BlockIOTag(0x1a5u) /* GTPro */ -#define VERTEX_3_X_Y BlockIOTag(0x1a6u) /* GTPro */ -/* ONE_OVER_AREA BlockIOTag(0x1a7u) */ /* Duplicate */ -#define VERTEX_3_SECONDARY_S BlockIOTag(0x1a8u) /* GTPro */ -#define VERTEX_3_SECONDARY_T BlockIOTag(0x1a9u) /* GTPro */ -#define VERTEX_3_SECONDARY_W BlockIOTag(0x1aau) /* GTPro */ -/* VERTEX_1_S BlockIOTag(0x1abu) */ /* Duplicate */ -/* VERTEX_1_T BlockIOTag(0x1acu) */ /* Duplicate */ -/* VERTEX_1_W BlockIOTag(0x1adu) */ /* Duplicate */ -/* VERTEX_2_S BlockIOTag(0x1aeu) */ /* Duplicate */ -/* VERTEX_2_T BlockIOTag(0x1afu) */ /* Duplicate */ -/* VERTEX_2_W BlockIOTag(0x1b0u) */ /* Duplicate */ -/* VERTEX_3_S BlockIOTag(0x1b1u) */ /* Duplicate */ -/* VERTEX_3_T BlockIOTag(0x1b2u) */ /* Duplicate */ -/* VERTEX_3_W BlockIOTag(0x1b3u) */ /* Duplicate */ -/* VERTEX_1_SPEC_ARGB BlockIOTag(0x1b4u) */ /* Duplicate */ -/* VERTEX_2_SPEC_ARGB BlockIOTag(0x1b5u) */ /* Duplicate */ -/* VERTEX_3_SPEC_ARGB BlockIOTag(0x1b6u) */ /* Duplicate */ -/* VERTEX_1_Z BlockIOTag(0x1b7u) */ /* Duplicate */ -/* VERTEX_2_Z BlockIOTag(0x1b8u) */ /* Duplicate */ -/* VERTEX_3_Z BlockIOTag(0x1b9u) */ /* Duplicate */ -/* VERTEX_1_ARGB BlockIOTag(0x1bau) */ /* Duplicate */ -/* VERTEX_2_ARGB BlockIOTag(0x1bbu) */ /* Duplicate */ -/* VERTEX_3_ARGB BlockIOTag(0x1bcu) */ /* Duplicate */ -/* VERTEX_1_X_Y BlockIOTag(0x1bdu) */ /* Duplicate */ -/* VERTEX_2_X_Y BlockIOTag(0x1beu) */ /* Duplicate */ -/* VERTEX_3_X_Y BlockIOTag(0x1bfu) */ /* Duplicate */ -#define ONE_OVER_AREA_UC BlockIOTag(0x1c0u) /* GTPro */ -#define SETUP_CNTL BlockIOTag(0x1c1u) /* GTPro */ -/* ? BlockIOTag(0x1c2u) */ -/* ? BlockIOTag(0x1c3u) */ -/* ? BlockIOTag(0x1c4u) */ -/* ? BlockIOTag(0x1c5u) */ -/* ? BlockIOTag(0x1c6u) */ -/* ? BlockIOTag(0x1c7u) */ -/* ? BlockIOTag(0x1c8u) */ -/* ? BlockIOTag(0x1c9u) */ -#define VERTEX_1_SECONDARY_S BlockIOTag(0x1cau) /* GTPro */ -#define VERTEX_1_SECONDARY_T BlockIOTag(0x1cbu) /* GTPro */ -#define VERTEX_1_SECONDARY_W BlockIOTag(0x1ccu) /* GTPro */ -#define VERTEX_2_SECONDARY_S BlockIOTag(0x1cdu) /* GTPro */ -#define VERTEX_2_SECONDARY_T BlockIOTag(0x1ceu) /* GTPro */ -#define VERTEX_2_SECONDARY_W BlockIOTag(0x1cfu) /* GTPro */ -/* ? BlockIOTag(0x1d0u) */ -/* ? BlockIOTag(0x1d1u) */ -/* ? BlockIOTag(0x1d2u) */ -/* ? BlockIOTag(0x1d3u) */ -/* ? BlockIOTag(0x1d4u) */ -/* ? BlockIOTag(0x1d5u) */ -/* ? BlockIOTag(0x1d6u) */ -/* ? BlockIOTag(0x1d7u) */ -/* ? BlockIOTag(0x1d8u) */ -/* ? BlockIOTag(0x1d9u) */ -/* ? BlockIOTag(0x1dau) */ -/* ? BlockIOTag(0x1dbu) */ -/* ? BlockIOTag(0x1dcu) */ -/* ? BlockIOTag(0x1ddu) */ -/* ? BlockIOTag(0x1deu) */ -/* ? BlockIOTag(0x1dfu) */ -/* ? BlockIOTag(0x1e0u) */ -/* ? BlockIOTag(0x1e1u) */ -/* ? BlockIOTag(0x1e2u) */ -/* ? BlockIOTag(0x1e3u) */ -/* ? BlockIOTag(0x1e4u) */ -/* ? BlockIOTag(0x1e5u) */ -/* ? BlockIOTag(0x1e6u) */ -/* ? BlockIOTag(0x1e7u) */ -/* ? BlockIOTag(0x1e8u) */ -/* ? BlockIOTag(0x1e9u) */ -/* ? BlockIOTag(0x1eau) */ -/* ? BlockIOTag(0x1ebu) */ -/* ? BlockIOTag(0x1ecu) */ -/* ? BlockIOTag(0x1edu) */ -/* ? BlockIOTag(0x1eeu) */ -/* ? BlockIOTag(0x1efu) */ -/* ? BlockIOTag(0x1f0u) */ -/* ? BlockIOTag(0x1f1u) */ -/* ? BlockIOTag(0x1f2u) */ -/* ? BlockIOTag(0x1f3u) */ -/* ? BlockIOTag(0x1f4u) */ -/* ? BlockIOTag(0x1f5u) */ -/* ? BlockIOTag(0x1f6u) */ -/* ? BlockIOTag(0x1f7u) */ -/* ? BlockIOTag(0x1f8u) */ -/* ? BlockIOTag(0x1f9u) */ -/* ? BlockIOTag(0x1fau) */ -/* ? BlockIOTag(0x1fbu) */ -/* ? BlockIOTag(0x1fcu) */ -/* ? BlockIOTag(0x1fdu) */ -/* ? BlockIOTag(0x1feu) */ -/* ? BlockIOTag(0x1ffu) */ - -/* Definitions for MEM_CNTL's CTL_MEM_?????_APER_ENDIAN fields */ -#define CTL_MEM_APER_BYTE_ENDIAN 0x00u -#define CTL_MEM_APER_WORD_ENDIAN 0x01u -#define CTL_MEM_APER_LONG_ENDIAN 0x02u -/* ? 0x03u */ - -/* Definitions for an ICS2595's programme word */ -#define ICS2595_CLOCK 0x000001f0ul -#define ICS2595_FB_DIV 0x0001fe00ul /* Feedback divider */ -#define ICS2595_POST_DIV 0x000c0000ul /* Post-divider */ -#define ICS2595_STOP 0x00300000ul /* Stop bits */ -#define ICS2595_TOGGLE (ICS2595_POST_DIV | ICS2595_STOP) - -/* Definitions for internal PLL registers on a 264xT */ -#define PLL_MPLL_CNTL 0x00u -#define MPLL_PC_GAIN 0x07u -#define MPLL_VC_GAIN 0x18u -#define MPLL_D_CYC 0x60u -#define MPLL_RANGE 0x80u -#define VPLL_CNTL 0x01u -#define VPLL_PC_GAIN 0x07u -#define VPLL_VC_GAIN 0x18u -#define VPLL_D_CYC 0x60u -#define VPLL_RANGE 0x80u -#define PLL_REF_DIV 0x02u -#define PLL_GEN_CNTL 0x03u -#define PLL_OVERRIDE 0x01u -#define PLL_SLEEP 0x01u /* GTPro */ -#define PLL_MCLK_RESET 0x02u -#define PLL_OSC_EN 0x04u -#define PLL_EXT_CLK_EN 0x08u -#define PLL_MCLK_SRC_SEL 0x70u -#define PLL_EXT_CLK_CNTL 0x80u /* CT/ET */ -#define PLL_DLL_PWDN 0x80u /* VTB/GTB/LT */ -#define PLL_MCLK_FB_DIV 0x04u -#define PLL_VCLK_CNTL 0x05u -#define PLL_VCLK_SRC_SEL 0x03u -#define PLL_VCLK_RESET 0x04u -#define PLL_VCLK_INVERT 0x08u -#define PLL_ECP_DIV 0x30u /* VT/GT */ -#define PLL_ERATE_GT_XRATE 0x40u /* VT/GT */ -#define PLL_SCALER_LOCK_EN 0x80u /* VT/GT */ -#define PLL_VCLK_POST_DIV 0x06u -#define PLL_VCLK0_POST_DIV 0x03u -#define PLL_VCLK1_POST_DIV 0x0cu -#define PLL_VCLK2_POST_DIV 0x30u -#define PLL_VCLK3_POST_DIV 0xc0u -#define PLL_VCLK0_FB_DIV 0x07u -#define PLL_VCLK1_FB_DIV 0x08u -#define PLL_VCLK2_FB_DIV 0x09u -#define PLL_VCLK3_FB_DIV 0x0au -#define PLL_XCLK_CNTL 0x0bu /* VT/GT */ -#define PLL_XCLK_MCLK_RATIO 0x03u -#define PLL_XCLK_SRC_SEL 0x07u /* VTB/GTB/LT */ -#define PLL_MFB_TIMES_4_2B 0x08u -#define PLL_VCLK0_XDIV 0x10u -#define PLL_VCLK1_XDIV 0x20u -#define PLL_VCLK2_XDIV 0x40u -#define PLL_VCLK3_XDIV 0x80u -#define PLL_FCP_CNTL 0x0cu /* VT/GT */ -#define PLL_FCP_POST_DIV 0x0fu -#define PLL_FCP_SRC_SEL 0x70u -#define PLL_DCLK_BY2_EN 0x80u -#define PLL_DLL_CNTL 0x0cu /* VTB/GTB/LT */ -#define PLL_DLL_REF_SRC 0x03u -#define PLL_DLL_FB_SRC 0x0cu -#define PLL_DLL_GAIN 0x30u -#define PLL_DLL_RESET 0x40u -#define PLL_DLL_HCLK_OUT_EN 0x80u -#define PLL_VFC_CNTL 0x0du /* VT/GT */ -#define PLL_DCLK_INVB 0x01u -#define PLL_DCLKBY2_EN 0x02u -#define PLL_VFC_2PHASE 0x04u -#define PLL_VFC_DELAY 0x18u -#define PLL_VFC_DCLKBY2_SHIFT 0x20u -/* ? 0x40u */ -#define PLL_TST_SRC_SEL_BIT5 0x80u /* VTB/GTB/LT */ -#define PLL_TEST_CNTL 0x0eu -#define PLL_TST_SRC_SEL 0x1fu -#define PLL_TST_DIVIDERS 0x20u -#define PLL_TST_MASK_READ 0x40u -#define PLL_TST_ANALOG_MON_EN 0x80u -#define PLL_TEST_COUNT 0x0fu -#define PLL_LVDSPLL_CNTL0 0x10u /* LT */ -#define PLL_FPDI_NS_TIMING 0x01u -#define PLL_CURR_LEVEL 0x0eu -#define PLL_LVDS_TEST_MODE 0xf0u -#define PLL_LVDSPLL_CNTL1 0x11u /* LT */ -#define PLL_LPPL_RANGE 0x01u -#define PLL_LPLL_DUTY 0x06u -#define PLL_LPLL_VC_GAIN 0x18u -#define PLL_LPLL_CP_GAIN 0xe0u -#define PLL_AGP1_CNTL 0x12u /* GTPro */ -#define PLL_AGP2_CNTL 0x13u /* GTPro */ -#define PLL_DLL2_CNTL 0x14u /* GTPro */ -#define PLL_SCLK_FB_DIV 0x15u /* GTPro */ -#define PLL_SPLL_CNTL1 0x16u /* GTPro */ -#define PLL_SPLL_CNTL2 0x17u /* GTPro */ -#define PLL_APLL_STRAPS 0x18u /* GTPro */ -#define PLL_EXT_VPLL_CNTL 0x19u /* GTPro */ -#define PLL_EXT_VPLL_REF_SRC 0x03u -#define PLL_EXT_VPLL_EN 0x04u -#define PLL_EXT_VPLL_VGA_EN 0x08u -#define PLL_EXT_VPLL_INSYNC 0x10u -/* ? 0x60u */ -#define PLL_EXT_V2PLL_EN 0x80u -#define PLL_EXT_VPLL_REF_DIV 0x1au /* GTPro */ -#define PLL_EXT_VPLL_FB_DIV 0x1bu /* GTPro */ -#define PLL_EXT_VPLL_MSB 0x1cu /* GTPro */ -#define PLL_HTOTAL_CNTL 0x1du /* GTPro */ -#define PLL_BYTE_CLK_CNTL 0x1eu /* GTPro */ -#define PLL_TV_REF_DIV 0x1fu /* LTPro */ -#define PLL_TV_FB_DIV 0x20u /* LTPro */ -#define PLL_TV_CNTL 0x21u /* LTPro */ -#define PLL_TV_GEN_CNTL 0x22u /* LTPro */ -#define PLL_V2_CNTL 0x23u /* LTPro */ -#define PLL_V2_GEN_CNTL 0x24u /* LTPro */ -#define PLL_V2_REF_DIV 0x25u /* LTPro */ -#define PLL_V2_FB_DIV 0x26u /* LTPro */ -#define PLL_V2_MSB 0x27u /* LTPro */ -#define PLL_HTOTAL2_CNTL 0x28u /* LTPro */ -#define PLL_YCLK_CNTL 0x29u /* XC/XL */ -#define PM_DYN_CLK_CNTL 0x2au /* XC/XL */ -/* ? 0x2bu */ -/* ? 0x2cu */ -/* ? 0x2du */ -/* ? 0x2eu */ -/* ? 0x2fu */ -/* ? 0x30u */ -/* ? 0x31u */ -/* ? 0x32u */ -/* ? 0x33u */ -/* ? 0x34u */ -/* ? 0x35u */ -/* ? 0x36u */ -/* ? 0x37u */ -/* ? 0x38u */ -/* ? 0x39u */ -/* ? 0x3au */ -/* ? 0x3bu */ -/* ? 0x3cu */ -/* ? 0x3du */ -/* ? 0x3eu */ -/* ? 0x3fu */ - -/* Definitions for an LTPro's 32-bit LCD registers */ -#define LCD_CONFIG_PANEL 0x00u /* See LT's CONFIG_PANEL (0x1d) */ -#define LCD_GEN_CNTL 0x01u /* See LT's LCD_GEN_CTRL (0x35) */ -#define LCD_DSTN_CONTROL 0x02u /* See LT's DSTN_CONTROL (0x1f) */ -#define LCD_HFB_PITCH_ADDR 0x03u /* See LT's HFB_PITCH_ADDR (0x2a) */ -#define LCD_HORZ_STRETCHING 0x04u /* See LT's HORZ_STRETCHING (0x32) */ -#define LCD_VERT_STRETCHING 0x05u /* See LT's VERT_STRETCHING (0x33) */ -#define LCD_EXT_VERT_STRETCH 0x06u -#define VERT_STRETCH_RATIO3 0x000003fful -#define FORCE_DAC_DATA 0x000000fful -#define FORCE_DAC_DATA_SEL 0x00000300ul -#define VERT_STRETCH_MODE 0x00000400ul -#define VERT_PANEL_SIZE 0x003ff800ul -#define AUTO_VERT_RATIO 0x00400000ul -#define USE_AUTO_FP_POS 0x00800000ul -#define USE_AUTO_LCD_VSYNC 0x01000000ul -/* ? 0xfe000000ul */ -#define LCD_LT_GIO 0x07u /* See LT's LT_GIO (0x2f) */ -#define LCD_POWER_MANAGEMENT 0x08u /* See LT's POWER_MANAGEMENT (0x36) */ -#define LCD_ZVGPIO 0x09u -#define LCD_ICON_CLR0 0x0au /* Mobility */ -#define LCD_ICON_CLR1 0x0bu /* Mobility */ -#define LCD_ICON_OFFSET 0x0cu /* Mobility */ -#define LCD_ICON_HORZ_VERT_POSN 0x0du /* Mobility */ -#define LCD_ICON_HORZ_VERT_OFF 0x0eu /* Mobility */ -#define LCD_ICON2_CLR0 0x0fu /* Mobility */ -#define LCD_ICON2_CLR1 0x10u /* Mobility */ -#define LCD_ICON2_OFFSET 0x11u /* Mobility */ -#define LCD_ICON2_HORZ_VERT_POSN 0x12u /* Mobility */ -#define LCD_ICON2_HORZ_VERT_OFF 0x13u /* Mobility */ -#define LCD_MISC_CNTL 0x14u /* XC/XL */ -#define BL_MOD_LEVEL 0x000000fful -#define BIAS_MOD_LEVEL 0x0000ff00ul -#define BLMOD_EN 0x00010000ul -#define BIASMOD_EN 0x00020000ul -/* ? 0x00040000ul */ -#define PWRSEQ_MODE 0x00080000ul -#define APC_EN 0x00100000ul -#define MONITOR_DET_EN 0x00200000ul -#define FORCE_DAC_DATA_SEL_X 0x00c00000ul -#define FORCE_DAC_DATA_X 0xff000000ul -#define LCD_TMDS_CNTL 0x15u /* XC/XL */ -#define LCD_SCRATCH_PAD_4M 0x15u /* Mobility */ -#define LCD_TMDS_SYNC_CHAR_SETA 0x16u /* XC/XL */ -#define LCD_SCRATCH_PAD_5M 0x16u /* Mobility */ -#define LCD_TMDS_SYNC_CHAR_SETB 0x17u /* XC/XL */ -#define LCD_SCRATCH_PAD_6M 0x17u /* Mobility */ -#define LCD_TMDS_SRC 0x18u /* XC/XL */ -#define LCD_SCRATCH_PAD_7M 0x18u /* Mobility */ -#define LCD_PLTSTBLK_CNTL 0x19u /* XC/XL */ -#define LCD_SCRATCH_PAD_8M 0x19u /* Mobility */ -#define LCD_SYNC_GEN_CNTL 0x1au /* XC/XL */ -#define LCD_PATTERN_GEN_SEED 0x1bu /* XC/XL */ -#define LCD_APC_CNTL 0x1cu /* XC/XL */ -#define LCD_POWER_MANAGEMENT_2 0x1du /* XC/XL */ -#define LCD_XCLK_DISP_PM_EN 0x00000001ul -#define LCD_XCLK_DISP2_PM_EN 0x00000002ul /* Mobility */ -#define LCD_XCLK_VID_PM_EN 0x00000004ul -#define LCD_XCLK_SCL_PM_EN 0x00000008ul -#define LCD_XCLK_GUI_PM_EN 0x00000010ul -#define LCD_XCLK_SUB_PM_EN 0x00000020ul -/* ? 0x000000c0ul */ -#define LCD_MCLK_PM_EN 0x00000100ul -#define LCD_SS_EN 0x00000200ul -#define LCD_BLON_DIGON_EN 0x00000400ul -/* ? 0x00000800ul */ -#define LCD_PM_DYN_XCLK_SYNC 0x00003000ul -#define LCD_SEL_W4MS 0x00004000ul -/* ? 0x00008000ul */ -#define LCD_PM_DYN_XCLK_EN 0x00010000ul -#define LCD_PM_XCLK_ALWAYS 0x00020000ul -#define LCD_PM_DYN_XCLK_STATUS 0x00040000ul -#define LCD_PCI_ACC_DIS 0x00080000ul -#define LCD_PM_DYN_XCLK_DISP 0x00100000ul -#define LCD_PM_DYN_XCLK_DISP2 0x00200000ul /* Mobility */ -#define LCD_PM_DYN_XCLK_VID 0x00400000ul -#define LCD_PM_DYN_XCLK_HFB 0x00800000ul -#define LCD_PM_DYN_XCLK_SCL 0x01000000ul -#define LCD_PM_DYN_XCLK_SUB 0x02000000ul -#define LCD_PM_DYN_XCLK_GUI 0x04000000ul -#define LCD_PM_DYN_XCLK_HOST 0x08000000ul -/* ? 0xf0000000ul */ -#define LCD_PRI_ERR_PATTERN 0x1eu /* XC/XL */ -#define LCD_CUR_ERR_PATTERN 0x1fu /* XC/XL */ -#define LCD_PLTSTBLK_RPT 0x20u /* XC/XL */ -#define LCD_SYNC_RPT 0x21u /* XC/XL */ -#define LCD_CRC_PATTERN_RPT 0x22u /* XC/XL */ -#define LCD_PL_TRANSMITTER_CNTL 0x23u /* XC/XL */ -#define LCD_PL_PLL_CNTL 0x24u /* XC/XL */ -#define LCD_ALPHA_BLENDING 0x25u /* Mobility */ -#define LCD_PORTRAIT_GEN_CNTL 0x26u /* Mobility */ -#define LCD_APC_CTRL_IO 0x27u /* Mobility */ -#define LCD_TEST_IO 0x28u /* XC/XL */ -/* ? 0x29u */ -#define LCD_DP1_MEM_ACCESS 0x2au /* XC/XL */ -#define LCD_DP0_MEM_ACCESS 0x2bu /* XC/XL */ -#define LCD_DP0_DEBUG_A 0x2cu /* XC/XL */ -#define LCD_DP0_DEBUG_B 0x2du /* XC/XL */ -#define LCD_DP1_DEBUG_A 0x2eu /* XC/XL */ -#define LCD_DP1_DEBUG_B 0x2fu /* XC/XL */ -#define LCD_DPCTRL_DEBUG_A 0x30u /* XC/XL */ -#define LCD_DPCTRL_DEBUG_B 0x31u /* XC/XL */ -#define LCD_MEMBLK_DEBUG 0x32u /* XC/XL */ -#define LCD_APC_LUT_AB 0x33u /* Mobility */ -#define LCD_SCRATCH_PAD_4X 0x33u /* XL/XC */ -#define LCD_APC_LUT_CD 0x34u /* Mobility */ -#define LCD_SCRATCH_PAD_5X 0x34u /* XL/XC */ -#define LCD_APC_LUT_EF 0x35u /* Mobility */ -#define LCD_SCRATCH_PAD_6X 0x35u /* XL/XC */ -#define LCD_APC_LUT_GH 0x36u /* Mobility */ -#define LCD_SCRATCH_PAD_7X 0x36u /* XL/XC */ -#define LCD_APC_LUT_IJ 0x37u /* Mobility */ -#define LCD_SCRATCH_PAD_8X 0x37u /* XL/XC */ -#define LCD_APC_LUT_KL 0x38u /* Mobility */ -#define LCD_APC_LUT_MN 0x39u /* Mobility */ -#define LCD_APC_LUT_OP 0x3au /* Mobility */ -/* ? 0x3bu */ -/* ? 0x3cu */ -/* ? 0x3du */ -/* ? 0x3eu */ -/* ? 0x3fu */ - -/* Definitions for an LTPro's TV registers */ -/* ? 0x00u */ -/* ? 0x01u */ -/* ? 0x02u */ -/* ? 0x03u */ -/* ? 0x04u */ -/* ? 0x05u */ -/* ? 0x06u */ -/* ? 0x07u */ -/* ? 0x08u */ -/* ? 0x09u */ -/* ? 0x0au */ -/* ? 0x0bu */ -/* ? 0x0cu */ -/* ? 0x0du */ -/* ? 0x0eu */ -/* ? 0x0fu */ -#define TV_MASTER_CNTL 0x10u -/* ? 0x11u */ -#define TV_RGB_CNTL 0x12u -/* ? 0x13u */ -#define TV_SYNC_CNTL 0x14u -/* ? 0x15u */ -/* ? 0x16u */ -/* ? 0x17u */ -/* ? 0x18u */ -/* ? 0x19u */ -/* ? 0x1au */ -/* ? 0x1bu */ -/* ? 0x1cu */ -/* ? 0x1du */ -/* ? 0x1eu */ -/* ? 0x1fu */ -#define TV_HTOTAL 0x20u -#define TV_HDISP 0x21u -#define TV_HSIZE 0x22u -#define TV_HSTART 0x23u -#define TV_HCOUNT 0x24u -#define TV_VTOTAL 0x25u -#define TV_VDISP 0x26u -#define TV_VCOUNT 0x27u -#define TV_FTOTAL 0x28u -#define TV_FCOUNT 0x29u -#define TV_FRESTART 0x2au -#define TV_HRESTART 0x2bu -#define TV_VRESTART 0x2cu -/* ? 0x2du */ -/* ? 0x2eu */ -/* ? 0x2fu */ -/* ? 0x30u */ -/* ? 0x31u */ -/* ? 0x32u */ -/* ? 0x33u */ -/* ? 0x34u */ -/* ? 0x35u */ -/* ? 0x36u */ -/* ? 0x37u */ -/* ? 0x38u */ -/* ? 0x39u */ -/* ? 0x3au */ -/* ? 0x3bu */ -/* ? 0x3cu */ -/* ? 0x3du */ -/* ? 0x3eu */ -/* ? 0x3fu */ -/* ? 0x40u */ -/* ? 0x41u */ -/* ? 0x42u */ -/* ? 0x43u */ -/* ? 0x44u */ -/* ? 0x45u */ -/* ? 0x46u */ -/* ? 0x47u */ -/* ? 0x48u */ -/* ? 0x49u */ -/* ? 0x4au */ -/* ? 0x4bu */ -/* ? 0x4cu */ -/* ? 0x4du */ -/* ? 0x4eu */ -/* ? 0x4fu */ -/* ? 0x50u */ -/* ? 0x51u */ -/* ? 0x52u */ -/* ? 0x53u */ -/* ? 0x54u */ -/* ? 0x55u */ -/* ? 0x56u */ -/* ? 0x57u */ -/* ? 0x58u */ -/* ? 0x59u */ -/* ? 0x5au */ -/* ? 0x5bu */ -/* ? 0x5cu */ -/* ? 0x5du */ -/* ? 0x5eu */ -/* ? 0x5fu */ -#define TV_HOST_READ_DATA 0x60u -#define TV_HOST_WRITE_DATA 0x61u -#define TV_HOST_RD_WT_CNTL 0x62u -/* ? 0x63u */ -/* ? 0x64u */ -/* ? 0x65u */ -/* ? 0x66u */ -/* ? 0x67u */ -/* ? 0x68u */ -/* ? 0x69u */ -/* ? 0x6au */ -/* ? 0x6bu */ -/* ? 0x6cu */ -/* ? 0x6du */ -/* ? 0x6eu */ -/* ? 0x6fu */ -#define TV_VSCALER_CNTL 0x70u -#define TV_TIMING_CNTL 0x71u -#define TV_GAMMA_CNTL 0x72u -#define TV_Y_FALL_CNTL 0x73u -#define TV_Y_RISE_CNTL 0x74u -#define TV_Y_SAW_TOOTH_CNTL 0x75u -/* ? 0x76u */ -/* ? 0x77u */ -/* ? 0x78u */ -/* ? 0x79u */ -/* ? 0x7au */ -/* ? 0x7bu */ -/* ? 0x7cu */ -/* ? 0x7du */ -/* ? 0x7eu */ -/* ? 0x7fu */ -#define TV_MODULATOR_CNTL1 0x80u -#define TV_MODULATOR_CNTL2 0x81u -/* ? 0x82u */ -/* ? 0x83u */ -/* ? 0x84u */ -/* ? 0x85u */ -/* ? 0x86u */ -/* ? 0x87u */ -/* ? 0x88u */ -/* ? 0x89u */ -/* ? 0x8au */ -/* ? 0x8bu */ -/* ? 0x8cu */ -/* ? 0x8du */ -/* ? 0x8eu */ -/* ? 0x8fu */ -#define TV_PRE_DAC_MUX_CNTL 0x90u -/* ? 0x91u */ -/* ? 0x92u */ -/* ? 0x93u */ -/* ? 0x94u */ -/* ? 0x95u */ -/* ? 0x96u */ -/* ? 0x97u */ -/* ? 0x98u */ -/* ? 0x99u */ -/* ? 0x9au */ -/* ? 0x9bu */ -/* ? 0x9cu */ -/* ? 0x9du */ -/* ? 0x9eu */ -/* ? 0x9fu */ -#define TV_DAC_CNTL 0xa0u -/* ? 0xa1u */ -/* ? 0xa2u */ -/* ? 0xa3u */ -/* ? 0xa4u */ -/* ? 0xa5u */ -/* ? 0xa6u */ -/* ? 0xa7u */ -/* ? 0xa8u */ -/* ? 0xa9u */ -/* ? 0xaau */ -/* ? 0xabu */ -/* ? 0xacu */ -/* ? 0xadu */ -/* ? 0xaeu */ -/* ? 0xafu */ -#define TV_CRC_CNTL 0xb0u -#define TV_VIDEO_PORT_SIG 0xb1u -/* ? 0xb2u */ -/* ? 0xb3u */ -/* ? 0xb4u */ -/* ? 0xb5u */ -/* ? 0xb6u */ -/* ? 0xb7u */ -#define TV_VBI_CC_CNTL 0xb8u -#define TV_VBI_EDS_CNTL 0xb9u -#define TV_VBI_20BIT_CNTL 0xbau -/* ? 0xbbu */ -/* ? 0xbcu */ -#define TV_VBI_DTO_CNTL 0xbdu -#define TV_VBI_LEVEL_CNTL 0xbeu -/* ? 0xbfu */ -#define TV_UV_ADR 0xc0u -#define TV_FIFO_TEST_CNTL 0xc1u -/* ? 0xc2u */ -/* ? 0xc3u */ -/* ? 0xc4u */ -/* ? 0xc5u */ -/* ? 0xc6u */ -/* ? 0xc7u */ -/* ? 0xc8u */ -/* ? 0xc9u */ -/* ? 0xcau */ -/* ? 0xcbu */ -/* ? 0xccu */ -/* ? 0xcdu */ -/* ? 0xceu */ -/* ? 0xcfu */ -/* ? 0xd0u */ -/* ? 0xd1u */ -/* ? 0xd2u */ -/* ? 0xd3u */ -/* ? 0xd4u */ -/* ? 0xd5u */ -/* ? 0xd6u */ -/* ? 0xd7u */ -/* ? 0xd8u */ -/* ? 0xd9u */ -/* ? 0xdau */ -/* ? 0xdbu */ -/* ? 0xdcu */ -/* ? 0xddu */ -/* ? 0xdeu */ -/* ? 0xdfu */ -/* ? 0xe0u */ -/* ? 0xe1u */ -/* ? 0xe2u */ -/* ? 0xe3u */ -/* ? 0xe4u */ -/* ? 0xe5u */ -/* ? 0xe6u */ -/* ? 0xe7u */ -/* ? 0xe8u */ -/* ? 0xe9u */ -/* ? 0xeau */ -/* ? 0xebu */ -/* ? 0xecu */ -/* ? 0xedu */ -/* ? 0xeeu */ -/* ? 0xefu */ -/* ? 0xf0u */ -/* ? 0xf1u */ -/* ? 0xf2u */ -/* ? 0xf3u */ -/* ? 0xf4u */ -/* ? 0xf5u */ -/* ? 0xf6u */ -/* ? 0xf7u */ -/* ? 0xf8u */ -/* ? 0xf9u */ -/* ? 0xfau */ -/* ? 0xfbu */ -/* ? 0xfcu */ -/* ? 0xfdu */ -/* ? 0xfeu */ -/* ? 0xffu */ - -/* Some ImpacTV definitions */ -#define IT_SDA_GET 0x40u -#define IT_SDA_SET 0x20u -#define IT_SDA_DIR 0x10u -#define IT_SCL_GET 0x04u -#define IT_SCL_SET 0x02u -#define IT_SCL_DIR 0x01u - -#define IT_I2C_CNTL 0x0015u - -/* Miscellaneous */ - -/* Current X, Y & Dest X, Y mask */ -#define COORD_MASK 0x07ffu - -/* Pixel widths */ -#define PIX_WIDTH_1BPP 0x00u -#define PIX_WIDTH_4BPP 0x01u /* CRTC2: 8bpp */ -#define PIX_WIDTH_8BPP 0x02u /* CRTC2: Undefined */ -#define PIX_WIDTH_15BPP 0x03u -#define PIX_WIDTH_16BPP 0x04u -#define PIX_WIDTH_24BPP 0x05u -#define PIX_WIDTH_32BPP 0x06u -#define PIX_WIDTH_YUV422 0x07u /* CRTC2 only */ - -/* Source definitions */ -#define SRC_BKGD 0x00u -#define SRC_FRGD 0x01u -#define SRC_HOST 0x02u -#define SRC_BLIT 0x03u -#define SRC_PATTERN 0x04u -#define SRC_SCALER_3D 0x05u -/* ? 0x06u */ -/* ? 0x07u */ - -/* The Mixes */ -#define MIX_MASK 0x001fu - -#define MIX_NOT_DST 0x0000u -#define MIX_0 0x0001u -#define MIX_1 0x0002u -#define MIX_DST 0x0003u -#define MIX_NOT_SRC 0x0004u -#define MIX_XOR 0x0005u -#define MIX_XNOR 0x0006u -#define MIX_SRC 0x0007u -#define MIX_NAND 0x0008u -#define MIX_NOT_SRC_OR_DST 0x0009u -#define MIX_SRC_OR_NOT_DST 0x000au -#define MIX_OR 0x000bu -#define MIX_AND 0x000cu -#define MIX_SRC_AND_NOT_DST 0x000du -#define MIX_NOT_SRC_AND_DST 0x000eu -#define MIX_NOR 0x000fu - -#define MIX_MIN 0x0010u -#define MIX_DST_MINUS_SRC 0x0011u -#define MIX_SRC_MINUS_DST 0x0012u -#define MIX_PLUS 0x0013u -#define MIX_MAX 0x0014u -#define MIX_HALF__DST_MINUS_SRC 0x0015u -#define MIX_HALF__SRC_MINUS_DST 0x0016u -#define MIX_AVERAGE 0x0017u -#define MIX_DST_MINUS_SRC_SAT 0x0018u -#define MIX_SRC_MINUS_DST_SAT 0x001au -#define MIX_HALF__DST_MINUS_SRC_SAT 0x001cu -#define MIX_HALF__SRC_MINUS_DST_SAT 0x001eu -#define MIX_AVERAGE_SAT 0x001fu -#define MIX_FN_PAINT MIX_SRC - -/* Video/Graphics mix functions for overlay */ -#define OVERLAY_MIX_FALSE 0x00u -#define OVERLAY_MIX_TRUE 0x01u -/* ? 0x02u */ -/* ? 0x03u */ -#define OVERLAY_MIX_NOT_EQUAL 0x04u -#define OVERLAY_MIX_EQUAL 0x05u -/* ? 0x06u */ -/* ? 0x07u */ - -#endif /* ___ATIREGS_H___ */ diff --git a/src/atirgb514.c b/src/atirgb514.c deleted file mode 100644 index bedb7940..00000000 --- a/src/atirgb514.c +++ /dev/null @@ -1,280 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atirgb514.c,v 1.4 2003/01/01 19:16:34 tsi Exp $ */ -/* - * Copyright 2001 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "aticrtc.h" -#include "atimach64io.h" -#include "atirgb514.h" - -/* - * ATIRGB514PreInit -- - * - * This function fills in the IBM RGB 514 portion of an ATIHWRec that is common - * to all video modes generated by the server. - */ -void -ATIRGB514PreInit -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - /* Get a work copy of IBM RGB 514 registers */ - ATIRGB514Save(pATI, pATIHW); - - /* Miscellaneous Clock Control */ - pATIHW->ibmrgb514[0x0002U] = 0x01U; - - /* Sync Control */ - pATIHW->ibmrgb514[0x0003U] &= ~0x80U; - - /* Horizontal Sync Control */ - pATIHW->ibmrgb514[0x0004U] = 0x00U; - - /* Power Management */ - pATIHW->ibmrgb514[0x0005U] = 0x00U; - - /* DAC Operation */ - pATIHW->ibmrgb514[0x0006U] &= ~0x04U; - - /* Palette Control */ - pATIHW->ibmrgb514[0x0007U] = 0x00U; - - /* PLL Control */ - pATIHW->ibmrgb514[0x0010U] = 0x01U; - - /* Cursor control */ - pATIHW->ibmrgb514[0x0030U] &= ~0x03U; /* For now */ - - /* Border (i.e. overscan) */ - pATIHW->ibmrgb514[0x0060U] = 0x00U; - pATIHW->ibmrgb514[0x0061U] = 0x00U; - pATIHW->ibmrgb514[0x0062U] = 0x00U; - - /* Miscellaneous Control */ - pATIHW->ibmrgb514[0x0070U] &= ~0x20U; - pATIHW->ibmrgb514[0x0071U] = 0x41U; /* See workaround in ATIRGB514Set() */ - -#ifndef AVOID_CPIO - - if (pATIHW->crtc == ATI_CRTC_VGA) - { - /* Pixel Format */ - pATIHW->ibmrgb514[0x000AU] = 0x03U; - - /* Miscellaneous Control */ - pATIHW->ibmrgb514[0x0070U] |= 0x40U; - - /* VRAM Mask */ - pATIHW->ibmrgb514[0x0090U] = 0x03U; - } - else - -#endif /* AVOID_CPIO */ - - { - /* Miscellaneous Control */ - pATIHW->ibmrgb514[0x0070U] &= ~0x40U; - - /* VRAM Mask */ - pATIHW->ibmrgb514[0x0090U] = 0x00U; - pATIHW->ibmrgb514[0x0091U] = 0x00U; - - /* Pixel Format */ - switch (pATI->depth) - { - case 8: - pATIHW->ibmrgb514[0x000AU] = 0x03U; - pATIHW->ibmrgb514[0x000BU] = 0x00U; - break; - - case 15: - pATIHW->ibmrgb514[0x000AU] = 0x04U; - pATIHW->ibmrgb514[0x000CU] = 0xC4U; - break; - - case 16: - pATIHW->ibmrgb514[0x000AU] = 0x04U; - pATIHW->ibmrgb514[0x000CU] = 0xC6U; - break; - - case 24: - if (pATI->bitsPerPixel == 24) - { - pATIHW->ibmrgb514[0x000AU] = 0x05U; - pATIHW->ibmrgb514[0x000DU] = 0x01U; - } - else - { - pATIHW->ibmrgb514[0x000AU] = 0x06U; - pATIHW->ibmrgb514[0x000EU] = 0x03U; - } - break; - - default: - break; - } - } - - if (pATI->rgbBits == 8) - pATIHW->ibmrgb514[0x0071U] |= 0x04U; -} - -/* - * ATIRGB514Save -- - * - * This function saves IBM RGB514 related data into an ATIHWRec. - */ -void -ATIRGB514Save -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - CARD32 crtc_gen_cntl, dac_cntl; - CARD8 index_lo, index_hi, index_ctl; - int Index; - - /* Temporarily switch to Mach64 CRTC */ - crtc_gen_cntl = inr(CRTC_GEN_CNTL); - if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN)) - outr(CRTC_GEN_CNTL, crtc_gen_cntl | CRTC_EXT_DISP_EN); - - /* Temporarily switch to IBM RGB 514 registers */ - dac_cntl = inr(DAC_CNTL) & ~(DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3); - outr(DAC_CNTL, dac_cntl | DAC_EXT_SEL_RS2); - - index_lo = in8(M64_DAC_WRITE); - index_hi = in8(M64_DAC_DATA); - index_ctl = in8(M64_DAC_READ); - - out8(M64_DAC_WRITE, 0x00U); - out8(M64_DAC_DATA, 0x00U); - out8(M64_DAC_READ, 0x01U); /* Auto-increment */ - - /* Save IBM RGB 514 registers */ - for (Index = 0; Index < NumberOf(pATIHW->ibmrgb514); Index++) - { - /* Need to rewrite the index every so often... */ - if ((Index == 0x0100) || (Index == 0x0500)) - { - out8(M64_DAC_WRITE, 0); - out8(M64_DAC_DATA, Index >> 8); - } - pATIHW->ibmrgb514[Index] = in8(M64_DAC_MASK); - } - - /* Restore registers */ - out8(M64_DAC_WRITE, index_lo); - out8(M64_DAC_DATA, index_hi); - out8(M64_DAC_READ, index_ctl); - outr(DAC_CNTL, dac_cntl); - if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN)) - outr(CRTC_GEN_CNTL, crtc_gen_cntl); -} - -/* - * ATIRGB514Calculate -- - * - * This function fills in the IBM RGB 514 portion of an ATIHWRec that is - * specific to a display mode. pATIHW->ibmrgb514 has already been - * initialised by a previous call to ATIRGB514PreInit(). - */ -void -ATIRGB514Calculate -( - ATIPtr pATI, - ATIHWPtr pATIHW, - DisplayModePtr pMode -) -{ - if (pATI->OptionCSync || (pMode->Flags & (V_CSYNC | V_PCSYNC))) - pATIHW->ibmrgb514[0x0006U] |= 0x08U; - else - pATIHW->ibmrgb514[0x0006U] &= ~0x08U; - - if (pMode->Flags & V_INTERLACE) - pATIHW->ibmrgb514[0x0071U] |= 0x20U; - else - pATIHW->ibmrgb514[0x0071U] &= ~0x20U; -} - -/* - * ATIRGB514Set -- - * - * This function is called to set an IBM RGB514's registers. - */ -void -ATIRGB514Set -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - CARD32 crtc_gen_cntl, dac_cntl; - CARD8 index_lo, index_hi, index_ctl; - int Index; - - /* Temporarily switch to Mach64 CRTC */ - crtc_gen_cntl = inr(CRTC_GEN_CNTL); - if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN)) - outr(CRTC_GEN_CNTL, crtc_gen_cntl | CRTC_EXT_DISP_EN); - - /* Temporarily switch to IBM RGB 514 registers */ - dac_cntl = inr(DAC_CNTL) & ~(DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3); - outr(DAC_CNTL, dac_cntl | DAC_EXT_SEL_RS2); - - index_lo = in8(M64_DAC_WRITE); - index_hi = in8(M64_DAC_DATA); - index_ctl = in8(M64_DAC_READ); - - out8(M64_DAC_WRITE, 0x00U); - out8(M64_DAC_DATA, 0x00U); - out8(M64_DAC_READ, 0x01U); /* Auto-increment */ - - /* Load IBM RGB 514 registers */ - for (Index = 0; Index < NumberOf(pATIHW->ibmrgb514); Index++) - out8(M64_DAC_MASK, pATIHW->ibmrgb514[Index]); - -#ifndef AVOID_CPIO - - /* Deal with documented anomaly */ - if (pATIHW->crtc == ATI_CRTC_VGA) - { - /* Reset Miscellaneous Control 2 */ - out8(M64_DAC_WRITE, 0x71U); - out8(M64_DAC_DATA, 0x00U); - out8(M64_DAC_MASK, pATIHW->ibmrgb514[0x0071U] & ~0x41U); - } - -#endif /* AVOID_CPIO */ - - /* Restore registers */ - out8(M64_DAC_WRITE, index_lo); - out8(M64_DAC_DATA, index_hi); - out8(M64_DAC_READ, index_ctl); - outr(DAC_CNTL, dac_cntl); - if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN)) - outr(CRTC_GEN_CNTL, crtc_gen_cntl); -} diff --git a/src/atirgb514.h b/src/atirgb514.h deleted file mode 100644 index 71f44d2d..00000000 --- a/src/atirgb514.h +++ /dev/null @@ -1,38 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atirgb514.h,v 1.3 2003/01/01 19:16:34 tsi Exp $ */ -/* - * Copyright 2001 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIRGB514_H___ -#define ___ATIRGB514_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -extern void ATIRGB514PreInit FunctionPrototype((ATIPtr, ATIHWPtr)); -extern void ATIRGB514Save FunctionPrototype((ATIPtr, ATIHWPtr)); -extern void ATIRGB514Calculate FunctionPrototype((ATIPtr, ATIHWPtr, - DisplayModePtr)); -extern void ATIRGB514Set FunctionPrototype((ATIPtr, ATIHWPtr)); - -#endif /* ___ATIRGB514_H___ */ diff --git a/src/atiscreen.c b/src/atiscreen.c deleted file mode 100644 index ec784cbc..00000000 --- a/src/atiscreen.c +++ /dev/null @@ -1,635 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiscreen.c,v 1.30 2003/04/23 21:51:30 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Gareth Hughes <gareth@valinux.com> - * José Fonseca <j_r_fonseca@yahoo.co.uk> - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#include "ati.h" -#include "atibus.h" -#include "atichip.h" -#include "atiaccel.h" -#include "aticonsole.h" -#include "aticursor.h" -#include "atidac.h" -#include "atidga.h" -#include "atidri.h" -#include "atimach64.h" -#include "atimode.h" -#include "atiscreen.h" -#include "atistruct.h" -#include "atixv.h" -#include "atimach64accel.h" - -#include "mach64_dri.h" -#include "mach64_sarea.h" - -#include "shadowfb.h" -#include "xf86cmap.h" - -#include "xf1bpp.h" -#include "xf4bpp.h" - -#include "fb.h" - -#include "mibank.h" -#include "micmap.h" -#include "mipointer.h" - -/* - * ATIRefreshArea -- - * - * This function is called by the shadow frame buffer code to refresh the - * hardware frame buffer. - */ -static void -ATIRefreshArea -( - ScrnInfoPtr pScreenInfo, - int nBox, - BoxPtr pBox -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - pointer pSrc, pDst; - int offset, w, h; - - while (nBox-- > 0) - { - w = (pBox->x2 - pBox->x1) * pATI->AdjustDepth; - h = pBox->y2 - pBox->y1; - offset = (pBox->y1 * pATI->FBPitch) + (pBox->x1 * pATI->AdjustDepth); - pSrc = (char *)pATI->pShadow + offset; - pDst = (char *)pATI->pMemory + offset; - - while (h-- > 0) - { - (void)memcpy(pDst, pSrc, w); - pSrc = (char *)pSrc + pATI->FBPitch; - pDst = (char *)pDst + pATI->FBPitch; - } - - pBox++; - } -} - -/* - * ATIMinBits -- - * - * Compute log base 2 of val. - */ -static int -ATIMinBits -( - int val -) -{ - int bits; - - if (!val) return 1; - for (bits = 0; val; val >>= 1, ++bits); - return bits; -} - -/* - * ATIScreenInit -- - * - * This function is called by DIX to initialise the screen. - */ -Bool -ATIScreenInit -( - int iScreen, - ScreenPtr pScreen, - int argc, - char **argv -) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[iScreen]; - ATIPtr pATI = ATIPTR(pScreenInfo); - pointer pFB; - int VisualMask; - BoxRec ScreenArea; - - /* Set video hardware state */ - if (!ATIEnterGraphics(pScreen, pScreenInfo, pATI)) - return FALSE; - - /* Re-initialise mi's visual list */ - miClearVisualTypes(); - - if ((pATI->depth > 8) && (pATI->DAC == ATI_DAC_INTERNAL)) - VisualMask = TrueColorMask; - else - VisualMask = miGetDefaultVisualMask(pATI->depth); - - if (!miSetVisualTypes(pATI->depth, VisualMask, pATI->rgbBits, - pScreenInfo->defaultVisual)) - return FALSE; - - if (!miSetPixmapDepths()) - return FALSE; - - pFB = pATI->pMemory; - pATI->FBPitch = PixmapBytePad(pATI->displayWidth, pATI->depth); - if (pATI->OptionShadowFB) - { - pATI->FBBytesPerPixel = pATI->bitsPerPixel >> 3; - pATI->FBPitch = PixmapBytePad(pATI->displayWidth, pATI->depth); - if ((pATI->pShadow = xalloc(pATI->FBPitch * pScreenInfo->virtualY))) - { - pFB = pATI->pShadow; - } - else - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Insufficient virtual memory for shadow frame buffer.\n"); - pATI->OptionShadowFB = FALSE; - } - } - -#ifdef XF86DRI - - /* Setup DRI after visuals have been established, but before - * cfbScreenInit is called. cfbScreenInit will eventually call the - * driver's InitGLXVisuals call back. - */ - - /* According to atiregs.h, GTPro (3D Rage Pro) is the first chip type with - * 3D triangle setup (the VERTEX_* registers) - */ - if (pATI->Chip < ATI_CHIP_264GTPRO) { - xf86DrvMsg(iScreen, X_WARNING, - "Direct rendering is not supported for ATI chips earlier than " - "the ATI 3D Rage Pro.\n"); - pATI->directRenderingEnabled = FALSE; - } else { - /* FIXME: When we move to dynamic allocation of back and depth - * buffers, we will want to revisit the following check for 3 - * times the virtual size (or 2.5 times for 24-bit depth) of the screen below. - */ - int cpp = pATI->bitsPerPixel >> 3; - int maxY = pScreenInfo->videoRam * 1024 / (pATI->displayWidth * cpp); - int requiredY; - - requiredY = pScreenInfo->virtualY * 2 /* front, back buffers */ - + (pScreenInfo->virtualY * 2 / cpp); /* depth buffer (always 16-bit) */ - - if (!pATI->OptionAccel) { - xf86DrvMsg(iScreen, X_WARNING, - "Acceleration disabled, not initializing the DRI\n"); - pATI->directRenderingEnabled = FALSE; - } else if ( maxY > requiredY ) { - pATI->directRenderingEnabled = ATIDRIScreenInit(pScreen); - } else { - xf86DrvMsg(iScreen, X_WARNING, - "DRI static buffer allocation failed -- " - "need at least %d kB video memory\n", - (pScreenInfo->displayWidth * requiredY * cpp ) / 1024); - pATI->directRenderingEnabled = FALSE; - } - } - -#endif /* XF86DRI */ - - /* Initialise framebuffer layer */ - switch (pATI->bitsPerPixel) - { - -#ifndef AVOID_CPIO - - case 1: - pATI->Closeable = xf1bppScreenInit(pScreen, pFB, - pScreenInfo->virtualX, pScreenInfo->virtualY, - pScreenInfo->xDpi, pScreenInfo->yDpi, pATI->displayWidth); - break; - - case 4: - pATI->Closeable = xf4bppScreenInit(pScreen, pFB, - pScreenInfo->virtualX, pScreenInfo->virtualY, - pScreenInfo->xDpi, pScreenInfo->yDpi, pATI->displayWidth); - break; - -#endif /* AVOID_CPIO */ - - case 8: - case 16: - case 24: - case 32: - pATI->Closeable = fbScreenInit(pScreen, pFB, - pScreenInfo->virtualX, pScreenInfo->virtualY, - pScreenInfo->xDpi, pScreenInfo->yDpi, pATI->displayWidth, - pATI->bitsPerPixel); - break; - - default: - return FALSE; - } - - if (!pATI->Closeable) - return FALSE; - - /* Fixup RGB ordering */ - if (pATI->depth > 8) - { - VisualPtr pVisual = pScreen->visuals + pScreen->numVisuals; - - while (--pVisual >= pScreen->visuals) - { - if ((pVisual->class | DynamicClass) != DirectColor) - continue; - - pVisual->offsetRed = pScreenInfo->offset.red; - pVisual->offsetGreen = pScreenInfo->offset.green; - pVisual->offsetBlue = pScreenInfo->offset.blue; - - pVisual->redMask = pScreenInfo->mask.red; - pVisual->greenMask = pScreenInfo->mask.green; - pVisual->blueMask = pScreenInfo->mask.blue; - } - } - - /* If applicable, initialise RENDER extension */ - if (pATI->bitsPerPixel > 4) - { - if (pATI->OptionShadowFB) - { - if (serverGeneration == 1) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "RENDER extension not supported with a shadowed" - " framebuffer.\n"); - } - -#ifndef AVOID_CPIO - - else if (pATI->BankInfo.BankSize) - { - if (serverGeneration == 1) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "RENDER extension not supported with a banked" - " framebuffer.\n"); - } - -#endif /* AVOID_CPIO */ - - else if (!fbPictureInit(pScreen, NULL, 0) && - (serverGeneration == 1)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "RENDER extension initialisation failed.\n"); - } - } - - xf86SetBlackWhitePixels(pScreen); - -#ifndef AVOID_CPIO - - /* Initialise banking if needed */ - if (!miInitializeBanking(pScreen, - pScreenInfo->virtualX, pScreenInfo->virtualY, - pATI->displayWidth, &pATI->BankInfo)) - return FALSE; - -#endif /* AVOID_CPIO */ - - /* Memory manager setup */ - -#ifdef XF86DRI - - if (pATI->directRenderingEnabled) - { - ATIDRIServerInfoPtr pATIDRIServer = pATI->pDRIServerInfo; - int cpp = pATI->bitsPerPixel >> 3; - int widthBytes = pScreenInfo->displayWidth * cpp; - int zWidthBytes = pScreenInfo->displayWidth * 2; /* always 16-bit z-buffer */ - int fbSize = pScreenInfo->videoRam * 1024; - int bufferSize = pScreenInfo->virtualY * widthBytes; - int zBufferSize = pScreenInfo->virtualY * zWidthBytes; - int offscreenBytes, total, scanlines; - - pATIDRIServer->fbX = 0; - pATIDRIServer->fbY = 0; - pATIDRIServer->frontOffset = 0; - pATIDRIServer->frontPitch = pScreenInfo->displayWidth; - - /* Calculate memory remaining for pixcache and textures after - * front, back, and depth buffers - */ - offscreenBytes = fbSize - ( 2 * bufferSize + zBufferSize ); - - if ( !pATIDRIServer->IsPCI && !pATI->OptionLocalTextures ) { - /* Don't allocate a local texture heap for AGP unless requested */ - pATIDRIServer->textureSize = 0; - } else { - int l, maxPixcache; - -# ifdef XvExtension - - int xvBytes; - - /* Try for enough pixmap cache for DVD and a full viewport - */ - xvBytes = 720*480*cpp; /* enough for single-buffered DVD */ - maxPixcache = xvBytes > bufferSize ? xvBytes : bufferSize; - -# else /* XvExtension */ - - /* Try for one viewport */ - maxPixcache = bufferSize; - -# endif /* XvExtension */ - - pATIDRIServer->textureSize = offscreenBytes - maxPixcache; - - /* If that gives us less than half the offscreen mem available for textures, split - * the available mem between textures and pixmap cache - */ - if (pATIDRIServer->textureSize < (offscreenBytes/2)) { - pATIDRIServer->textureSize = offscreenBytes/2; - } - - if (pATIDRIServer->textureSize <= 0) - pATIDRIServer->textureSize = 0; - - l = ATIMinBits((pATIDRIServer->textureSize-1) / MACH64_NR_TEX_REGIONS); - if (l < MACH64_LOG_TEX_GRANULARITY) l = MACH64_LOG_TEX_GRANULARITY; - - /* Round the texture size up to the nearest whole number of - * texture regions. Again, be greedy about this, don't round - * down. - */ - pATIDRIServer->logTextureGranularity = l; - pATIDRIServer->textureSize = - (pATIDRIServer->textureSize >> l) << l; - } - - total = fbSize - pATIDRIServer->textureSize; - scanlines = total / widthBytes; - if (scanlines > ATIMach64MaxY) scanlines = ATIMach64MaxY; - - /* Recalculate the texture offset and size to accomodate any - * rounding to a whole number of scanlines. - * FIXME: Is this actually needed? - */ - pATIDRIServer->textureOffset = scanlines * widthBytes; - pATIDRIServer->textureSize = fbSize - pATIDRIServer->textureOffset; - - /* Set a minimum usable local texture heap size. This will fit - * two 256x256 textures. We check this after any rounding of - * the texture area. - */ - if (pATIDRIServer->textureSize < 256*256 * cpp * 2) { - pATIDRIServer->textureOffset = 0; - pATIDRIServer->textureSize = 0; - scanlines = fbSize / widthBytes; - if (scanlines > ATIMach64MaxY) scanlines = ATIMach64MaxY; - } - - pATIDRIServer->depthOffset = scanlines * widthBytes - zBufferSize; - pATIDRIServer->depthPitch = pScreenInfo->displayWidth; - pATIDRIServer->depthY = pATIDRIServer->depthOffset/widthBytes; - pATIDRIServer->depthX = (pATIDRIServer->depthOffset - - (pATIDRIServer->depthY * widthBytes)) / cpp; - - pATIDRIServer->backOffset = pATIDRIServer->depthOffset - bufferSize; - pATIDRIServer->backPitch = pScreenInfo->displayWidth; - pATIDRIServer->backY = pATIDRIServer->backOffset/widthBytes; - pATIDRIServer->backX = (pATIDRIServer->backOffset - - (pATIDRIServer->backY * widthBytes)) / cpp; - - scanlines = fbSize / widthBytes; - if (scanlines > ATIMach64MaxY) scanlines = ATIMach64MaxY; - - if ( pATIDRIServer->IsPCI && pATIDRIServer->textureSize == 0 ) { - xf86DrvMsg(iScreen, X_WARNING, - "Not enough memory for local textures, disabling DRI\n"); - ATIDRICloseScreen(pScreen); - pATI->directRenderingEnabled = FALSE; - } else { - - ScreenArea.x1 = 0; - ScreenArea.y1 = 0; - ScreenArea.x2 = pATI->displayWidth; - ScreenArea.y2 = scanlines; - - if (!xf86InitFBManager(pScreen, &ScreenArea)) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Memory manager initialization to (%d,%d) (%d,%d) failed\n", - ScreenArea.x1, ScreenArea.y1, - ScreenArea.x2, ScreenArea.y2); - return FALSE; - } else { - int width, height; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Memory manager initialized to (%d,%d) (%d,%d)\n", - ScreenArea.x1, ScreenArea.y1, ScreenArea.x2, ScreenArea.y2); - - if (xf86QueryLargestOffscreenArea(pScreen, &width, &height, 0, 0, 0)) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Largest offscreen area available: %d x %d\n", - width, height); - - /* lines in offscreen area needed for depth buffer and textures */ - pATI->depthTexLines = scanlines - - pATIDRIServer->depthOffset / widthBytes; - pATI->backLines = scanlines - - pATIDRIServer->backOffset / widthBytes - - pATI->depthTexLines; - pATI->depthTexArea = NULL; - pATI->backArea = NULL; - } else { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Unable to determine largest offscreen area available\n"); - return FALSE; - } - - } - - xf86DrvMsg(iScreen, X_INFO, "Will use %d kB of offscreen memory for XAA\n", - (offscreenBytes - pATIDRIServer->textureSize)/1024); - - xf86DrvMsg(iScreen, X_INFO, "Will use back buffer at offset 0x%x\n", - pATIDRIServer->backOffset); - - xf86DrvMsg(iScreen, X_INFO, "Will use depth buffer at offset 0x%x\n", - pATIDRIServer->depthOffset); - - if (pATIDRIServer->textureSize > 0) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Will use %d kB for local textures at offset 0x%x\n", - pATIDRIServer->textureSize/1024, - pATIDRIServer->textureOffset); - } - } - } - -#endif /* XF86DRI */ - - /* Setup acceleration */ - /* If direct rendering is not enabled, the framebuffer memory - * manager is initialized by this function call */ - if (!ATIInitializeAcceleration(pScreen, pScreenInfo, pATI)) - return FALSE; - -#ifndef AVOID_DGA - - /* Initialise DGA support */ - (void)ATIDGAInit(pScreen, pScreenInfo, pATI); - -#endif /* AVOID_DGA */ - - /* Initialise backing store */ - miInitializeBackingStore(pScreen); - xf86SetBackingStore(pScreen); - - /* Initialise cursor */ - if (!ATIInitializeCursor(pScreen, pATI)) - return FALSE; - - /* Create default colourmap */ - if (!miCreateDefColormap(pScreen)) - return FALSE; - -#ifdef AVOID_CPIO - - if (!xf86HandleColormaps(pScreen, 256, pATI->rgbBits, ATILoadPalette, NULL, - CMAP_PALETTED_TRUECOLOR | - CMAP_LOAD_EVEN_IF_OFFSCREEN)) - return FALSE; - -#else /* AVOID_CPIO */ - - if (pATI->depth > 1) - if (!xf86HandleColormaps(pScreen, (pATI->depth == 4) ? 16 : 256, - pATI->rgbBits, ATILoadPalette, NULL, - CMAP_PALETTED_TRUECOLOR | - CMAP_LOAD_EVEN_IF_OFFSCREEN)) - return FALSE; - -#endif /* AVOID_CPIO */ - - /* Initialise shadow framebuffer */ - if (pATI->OptionShadowFB && - !ShadowFBInit(pScreen, ATIRefreshArea)) - return FALSE; - - /* Initialise DPMS support */ - (void)xf86DPMSInit(pScreen, ATISetDPMSMode, 0); - - /* Initialise XVideo support */ - (void)ATIInitializeXVideo(pScreen, pScreenInfo, pATI); - - /* Set pScreen->SaveScreen and wrap CloseScreen vector */ - pScreen->SaveScreen = ATISaveScreen; - pATI->CloseScreen = pScreen->CloseScreen; - pScreen->CloseScreen = ATICloseScreen; - - if (serverGeneration == 1) - xf86ShowUnusedOptions(pScreenInfo->scrnIndex, pScreenInfo->options); - -#ifdef XF86DRI - - /* DRI finalization */ - if (pATI->directRenderingEnabled) { - /* Now that mi, cfb, drm and others have done their thing, - * complete the DRI setup. - */ - pATI->directRenderingEnabled = ATIDRIFinishScreenInit(pScreen); - } - if (pATI->directRenderingEnabled) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Direct rendering enabled\n"); - } else { - /* FIXME: Release unused offscreen mem here? */ - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Direct rendering disabled\n"); - } - -#endif /* XF86DRI */ - - return TRUE; -} - -/* - * ATICloseScreen -- - * - * This function is called by DIX to close the screen. - */ -Bool -ATICloseScreen -( - int iScreen, - ScreenPtr pScreen -) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[iScreen]; - ATIPtr pATI = ATIPTR(pScreenInfo); - Bool Closed = TRUE; - -#ifdef XF86DRI - - /* Disable direct rendering */ - if (pATI->directRenderingEnabled) - { - ATIDRICloseScreen(pScreen); - pATI->directRenderingEnabled = FALSE; - } - -#endif /* XF86DRI */ - - ATICloseXVideo(pScreen, pScreenInfo, pATI); - - if (pATI->pXAAInfo) - { - XAADestroyInfoRec(pATI->pXAAInfo); - pATI->pXAAInfo = NULL; - } - - if ((pScreen->CloseScreen = pATI->CloseScreen)) - { - pATI->CloseScreen = NULL; - Closed = (*pScreen->CloseScreen)(iScreen, pScreen); - } - - pATI->Closeable = FALSE; - - if (pATI->pCursorInfo) - { - xf86DestroyCursorInfoRec(pATI->pCursorInfo); - pATI->pCursorInfo = NULL; - } - - ATILeaveGraphics(pScreenInfo, pATI); - - xfree(pATI->ExpansionBitmapScanlinePtr[1]); - pATI->ExpansionBitmapScanlinePtr[0] = - pATI->ExpansionBitmapScanlinePtr[1] = NULL; - - xfree(pATI->pShadow); - pATI->pShadow = NULL; - pScreenInfo->pScreen = NULL; - - return Closed; -} diff --git a/src/atiscreen.h b/src/atiscreen.h deleted file mode 100644 index 7397042b..00000000 --- a/src/atiscreen.h +++ /dev/null @@ -1,34 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiscreen.h,v 1.6 2003/01/01 19:16:34 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATISCREEN_H___ -#define ___ATISCREEN_H___ 1 - -#include "atiproto.h" - -#include "screenint.h" - -extern Bool ATIScreenInit FunctionPrototype((int, ScreenPtr, int, char **)); -extern Bool ATICloseScreen FunctionPrototype((int, ScreenPtr)); - -#endif /* ___ATISCREEN_H___ */ diff --git a/src/atistruct.h b/src/atistruct.h deleted file mode 100644 index cbaf1b85..00000000 --- a/src/atistruct.h +++ /dev/null @@ -1,491 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atistruct.h,v 1.39 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - * - * DRI support by: - * Gareth Hughes <gareth@valinux.com> - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifndef ___ATISTRUCT_H___ -#define ___ATISTRUCT_H___ 1 - -#include "atibank.h" -#include "aticlock.h" -#include "atiregs.h" - -#ifdef XF86DRI - -/* - * DRI support - */ -#define _XF86DRI_SERVER_ -#include "atidripriv.h" -#include "mach64_dri.h" -#include "sarea.h" -#include "xf86dri.h" -#include "dri.h" - -#endif /* XF86DRI */ - -#include "xaa.h" -#include "xf86Cursor.h" -#include "xf86Pci.h" -#include "xf86Resources.h" - -#define CacheSlotOf(____Register) ((____Register) / UnitOf(DWORD_SELECT)) - -/* - * This is probably as good a place as any to put this note, as it applies to - * the entire driver, but especially here. CARD8's are used rather than the - * appropriate enum types because the latter would nearly quadruple storage - * requirements (they are stored as int's). This reduces the usefulness of - * enum types to their ability to declare index values. I've also elected to - * forgo the strong typing capabilities of enum types. C is not terribly adept - * at strong typing anyway. - */ - -/* A structure for local data related to video modes */ -typedef struct _ATIHWRec -{ - /* Clock number for mode */ - CARD8 clock; - - /* The CRTC used to drive the screen (VGA, 8514, Mach64) */ - CARD8 crtc; - - /* Colour lookup table */ - CARD8 lut[256 * 3]; - -#ifndef AVOID_CPIO - - /* VGA registers */ - CARD8 genmo, crt[25], seq[5], gra[9], attr[21]; - - /* VGA Wonder registers */ - CARD8 a3, a6, a7, ab, ac, ad, ae, - b0, b1, b2, b3, b5, b6, b8, b9, ba, bd, be, bf; - - /* Shadow VGA CRTC registers */ - CARD8 shadow_vga[25]; - -#endif /* AVOID_CPIO */ - - /* Generic DAC registers */ - CARD8 dac_read, dac_write, dac_mask; - - /* IBM RGB 514 registers */ - CARD8 ibmrgb514[0x0092U]; /* All that's needed for now */ - - /* Mach64 PLL registers */ - CARD8 pll_vclk_cntl, pll_vclk_post_div, - pll_vclk0_fb_div, pll_vclk1_fb_div, - pll_vclk2_fb_div, pll_vclk3_fb_div, - pll_xclk_cntl, pll_ext_vpll_cntl; - - /* Mach64 CPIO registers */ - CARD32 crtc_h_total_disp, crtc_h_sync_strt_wid, - crtc_v_total_disp, crtc_v_sync_strt_wid, - crtc_off_pitch, crtc_gen_cntl, dsp_config, dsp_on_off, - ovr_clr, ovr_wid_left_right, ovr_wid_top_bottom, - cur_clr0, cur_clr1, cur_offset, - cur_horz_vert_posn, cur_horz_vert_off, - clock_cntl, bus_cntl, mem_cntl, mem_vga_wp_sel, mem_vga_rp_sel, - dac_cntl, gen_test_cntl, config_cntl, mpp_config, mpp_strobe_seq, - tvo_cntl; - - /* LCD registers */ - CARD32 lcd_index, config_panel, lcd_gen_ctrl, - horz_stretching, vert_stretching, ext_vert_stretch; - - /* Shadow Mach64 CRTC registers */ - CARD32 shadow_h_total_disp, shadow_h_sync_strt_wid, - shadow_v_total_disp, shadow_v_sync_strt_wid; - - /* Mach64 MMIO Block 0 registers and related subfields */ - CARD32 dst_off_pitch; - CARD16 dst_x, dst_y, dst_height; - CARD32 dst_bres_err, dst_bres_inc, dst_bres_dec, dst_cntl; - CARD32 src_off_pitch; - CARD16 src_x, src_y, src_width1, src_height1, - src_x_start, src_y_start, src_width2, src_height2; - CARD32 src_cntl; - CARD32 host_cntl; - CARD32 pat_reg0, pat_reg1, pat_cntl; - CARD16 sc_left, sc_right, sc_top, sc_bottom; - CARD32 dp_bkgd_clr, dp_frgd_clr, dp_write_mask, dp_chain_mask, - dp_pix_width, dp_mix, dp_src; - CARD32 clr_cmp_clr, clr_cmp_msk, clr_cmp_cntl; - CARD32 context_mask, context_load_cntl; - - /* Mach64 MMIO Block 1 registers */ - CARD32 overlay_y_x_start, overlay_y_x_end, overlay_graphics_key_clr, - overlay_graphics_key_msk, overlay_key_cntl, overlay_scale_inc, - overlay_scale_cntl, scaler_height_width, scaler_test, - scaler_buf0_offset, scaler_buf1_offset, scaler_buf_pitch, - video_format, overlay_exclusive_horz, overlay_exclusive_vert, - buf0_offset, buf0_pitch, buf1_offset, buf1_pitch, - scaler_colour_cntl, scaler_h_coeff0, scaler_h_coeff1, - scaler_h_coeff2, scaler_h_coeff3, scaler_h_coeff4, gui_cntl, - scaler_buf0_offset_u, scaler_buf0_offset_v, scaler_buf1_offset_u, - scaler_buf1_offset_v; - - /* Clock map pointers */ - const CARD8 *ClockMap, *ClockUnmap; - - /* Clock programming data */ - int FeedbackDivider, ReferenceDivider, PostDivider; - -#ifndef AVOID_CPIO - - /* This is used by ATISwap() */ - pointer frame_buffer; - ATIBankProcPtr SetBank; - unsigned int nBank, nPlane; - -#endif /* AVOID_CPIO */ - -} ATIHWRec; - -/* - * This structure defines the driver's private area. - */ -typedef struct _ATIRec -{ - /* - * Definitions related to XF86Config "Chipset" specifications. - */ - CARD8 Chipset; - - /* - * Adapter-related definitions. - */ - CARD8 Adapter; - -#ifndef AVOID_CPIO - - CARD8 VGAAdapter; - -#endif /* AVOID_CPIO */ - - /* - * Chip-related definitions. - */ - CARD32 config_chip_id; - CARD16 ChipType; - CARD8 Chip; - CARD8 ChipClass, ChipRevision, ChipRev, ChipVersion, ChipFoundry; - -#ifndef AVOID_CPIO - - CARD8 Coprocessor, ChipHasSUBSYS_CNTL; - -#endif /* AVOID_CPIO */ - - /* - * Processor I/O decoding definitions. - */ - CARD8 CPIODecoding; - IOADDRESS CPIOBase; - -#ifndef AVOID_CPIO - - /* - * Processor I/O port definition for VGA. - */ - IOADDRESS CPIO_VGABase; - - /* - * Processor I/O port definitions for VGA Wonder. - */ - IOADDRESS CPIO_VGAWonder; - CARD8 B2Reg; /* The B2 mirror */ - CARD8 VGAOffset; /* Low index for CPIO_VGAWonder */ - -#endif /* AVOID_CPIO */ - - /* - * DAC-related definitions. - */ - -#ifndef AVOID_CPIO - - IOADDRESS CPIO_DAC_MASK, CPIO_DAC_DATA, CPIO_DAC_READ, CPIO_DAC_WRITE, - CPIO_DAC_WAIT; - -#endif /* AVOID_CPIO */ - - CARD16 DAC; - CARD8 rgbBits; - - /* - * Definitions related to system bus interface. - */ - pciVideoPtr PCIInfo; - CARD8 BusType; - CARD8 SharedAccelerator; - -#ifndef AVOID_CPIO - - CARD8 SharedVGA; - resRange VGAWonderResources[2]; - -#endif /* AVOID_CPIO */ - - /* - * Definitions related to video memory. - */ - CARD8 MemoryType; - int VideoRAM; - - /* - * BIOS-related definitions. - */ - unsigned long BIOSBase; - CARD8 I2CType, Tuner, Decoder, Audio; - - /* - * Definitions related to video memory apertures. - */ - pointer pMemory, pShadow; - pointer pMemoryLE; /* Always little-endian */ - unsigned long LinearBase; - int LinearSize, FBPitch, FBBytesPerPixel; - -#ifndef AVOID_CPIO - - /* - * Banking interface. - */ - miBankInfoRec BankInfo; - pointer pBank; - CARD8 UseSmallApertures; - -#endif /* AVOID_CPIO */ - - /* - * Definitions related to MMIO register apertures. - */ - pointer pMMIO, pBlock[2]; - unsigned long Block0Base, Block1Base; - - /* - * XAA interface. - */ - XAAInfoRecPtr pXAAInfo; - int nAvailableFIFOEntries, nFIFOEntries, nHostFIFOEntries; - CARD8 EngineIsBusy, EngineIsLocked, XModifier; - CARD32 dst_cntl; /* For SetupFor/Subsequent communication */ - CARD32 sc_left_right, sc_top_bottom; - CARD16 sc_left, sc_right, sc_top, sc_bottom; /* Current scissors */ - pointer pHOST_DATA; /* Current HOST_DATA_* transfer window address */ - CARD32 *ExpansionBitmapScanlinePtr[2]; - int ExpansionBitmapWidth; - - /* - * Cursor-related definitions. - */ - xf86CursorInfoPtr pCursorInfo; - pointer pCursorPage, pCursorImage; - unsigned long CursorBase; - CARD32 CursorOffset; - CARD16 CursorXOffset, CursorYOffset; - CARD8 Cursor; - - /* - * MMIO cache. - */ - CARD32 MMIOCache[CacheSlotOf(DWORD_SELECT) + 1]; - CARD8 MMIOCached[(CacheSlotOf(DWORD_SELECT) + 8) >> 3]; - - /* - * Clock-related definitions. - */ - int ClockNumberToProgramme, ReferenceNumerator, ReferenceDenominator; - int ProgrammableClock, maxClock; - ClockRec ClockDescriptor; - CARD16 BIOSClocks[16]; - CARD8 Clock; - - /* - * DSP register data. - */ - int XCLKFeedbackDivider, XCLKReferenceDivider, XCLKPostDivider; - CARD16 XCLKMaxRASDelay, XCLKPageFaultDelay, - DisplayLoopLatency, DisplayFIFODepth; - - /* - * LCD panel data. - */ - int LCDPanelID, LCDClock, LCDHorizontal, LCDVertical; - int LCDHSyncStart, LCDHSyncWidth, LCDHBlankWidth; - int LCDVSyncStart, LCDVSyncWidth, LCDVBlankWidth; - int LCDVBlendFIFOSize; - - /* - * Data used by ATIAdjustFrame(). - */ - int AdjustDepth, AdjustMaxX, AdjustMaxY; - unsigned long AdjustMask, AdjustMaxBase; - - /* - * DGA and non-DGA common data. - */ - DisplayModePtr currentMode; - CARD8 depth, bitsPerPixel; - short int displayWidth; - int pitchInc; - rgb weight; - -#ifndef AVOID_DGA - - /* - * DGA-related data. - */ - DGAModePtr pDGAMode; - DGAFunctionRec ATIDGAFunctions; - int nDGAMode; - - /* - * XAAForceTransBlit alters the behavior of 'SetupForScreenToScreenCopy', - * such that ~0 is interpreted as a legitimate transparency key. - */ - CARD8 XAAForceTransBlit; - -#endif /* AVOID_DGA */ - - /* - * XVideo-related data. - */ - DevUnion XVPortPrivate[1]; - FBLinearPtr pXVBuffer; - RegionRec VideoClip; - int SurfacePitch, SurfaceOffset; - CARD8 AutoPaint, DoubleBuffer, CurrentBuffer, ActiveSurface; - - /* - * Data saved by ATIUnlock() and restored by ATILock(). - */ - struct - { - /* Mach64 registers */ - CARD32 crtc_int_cntl, crtc_gen_cntl, i2c_cntl_0, hw_debug, - scratch_reg3, bus_cntl, lcd_index, mem_cntl, i2c_cntl_1, - dac_cntl, gen_test_cntl, mpp_config, mpp_strobe_seq, tvo_cntl; - -#ifndef AVOID_CPIO - - CARD32 config_cntl; - - /* Mach8/Mach32 registers */ - CARD16 clock_sel, misc_options, mem_bndry, mem_cfg; - - /* VGA Wonder registers */ - CARD8 a6, ab, b1, b4, b5, b6, b8, b9, be; - - /* VGA registers */ - CARD8 crt03, crt11; - - /* VGA shadow registers */ - CARD8 shadow_crt03, shadow_crt11; - -#endif /* AVOID_CPIO */ - - } LockData; - - /* Mode data */ - ATIHWRec OldHW, NewHW; - int MaximumInterlacedPitch; - Bool InterlacedSeen; - - /* - * Resource Access Control entity index. - */ - int iEntity; - - /* - * Driver options. - */ - CARD8 OptionAccel; /* Use hardware draw engine */ - CARD8 OptionBlend; /* Force horizontal blending */ - CARD8 OptionCRTDisplay; /* Display on both CRT and digital panel */ - CARD8 OptionCSync; /* Use composite sync */ - CARD8 OptionDevel; /* Intentionally undocumented */ - -#ifndef AVOID_CPIO - - CARD8 OptionLinear; /* Use linear fb aperture when available */ - -#endif /* AVOID_CPIO */ - - CARD8 OptionMMIOCache; /* Cache MMIO writes */ - CARD8 OptionTestMMIOCache; /* Test MMIO cache integrity */ - CARD8 OptionPanelDisplay; /* Prefer CRT over digital panel */ - CARD8 OptionProbeClocks; /* Force probe for fixed clocks */ - CARD8 OptionShadowFB; /* Use shadow frame buffer */ - CARD8 OptionLCDSync; /* Temporary */ - - /* - * State flags. - */ - CARD8 Unlocked, Mapped, Closeable; - CARD8 MMIOInLinear; - - /* - * Wrapped functions. - */ - CloseScreenProcPtr CloseScreen; - -#ifdef XF86DRI - - /* - * DRI data. - */ - int directRenderingEnabled; - DRIInfoPtr pDRIInfo; - int drmFD; - int irq; - int numVisualConfigs; - __GLXvisualConfig *pVisualConfigs; - ATIConfigPrivPtr pVisualConfigsPriv; - ATIDRIServerInfoPtr pDRIServerInfo; - Bool NeedDRISync; - Bool have3DWindows; - - /* offscreen memory management */ - int backLines; - FBAreaPtr backArea; - int depthTexLines; - FBAreaPtr depthTexArea; - CARD8 OptionIsPCI; /* Force PCI mode */ - CARD8 OptionDMAMode; /* async, sync, mmio */ - CARD8 OptionAGPMode; /* AGP mode */ - CARD8 OptionAGPSize; /* AGP size in MB */ - CARD8 OptionLocalTextures; /* Use local textures + AGP textures (only valid for AGP) */ - CARD8 OptionBufferSize; /* Command/dma buffer size in MB */ - -#endif /* XF86DRI */ - -} ATIRec; - -#define ATIPTR(_p) ((ATIPtr)((_p)->driverPrivate)) - -#endif /* ___ATISTRUCT_H___ */ diff --git a/src/atituner.c b/src/atituner.c deleted file mode 100644 index 55dc7c2e..00000000 --- a/src/atituner.c +++ /dev/null @@ -1,174 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atituner.c,v 1.1 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "atituner.h" - -/* Temporary interface glitch */ -#if 0 -# include "fi12x6.h" -#else - typedef enum { - FI12x6_TYPE_UNKNOWN = -1, - FI12x6_TYPE_FI1236 = 0, - FI12x6_TYPE_FI1216, - FI12x6_TYPE_FI1216MF, - FI12x6_TYPE_TEMIC_FN5AL, - FI12x6_TYPE_MT2032, - FI12x6_TYPE_MAX /* Must be last */ - } FI12x6TunerType; -#endif - -/* - * TV tuner definitions. - */ -const SymTabRec ATITuners[] = -{ - { - FI12x6_TYPE_UNKNOWN, - "No tuner" - }, - { - FI12x6_TYPE_FI1236, - "Philips FI1236 MK1 NTSC M/N North America" - }, - { - FI12x6_TYPE_FI1236, - "Philips FI1236 MK2 NTSC M/N Japan" - }, - { - FI12x6_TYPE_FI1216, - "Philips FI1216 MK2 PAL B/G" - }, - { - FI12x6_TYPE_UNKNOWN, - "Philips FI1246 MK2 PAL I" - }, - { - FI12x6_TYPE_FI1216MF, - "Philips FI1216 MF MK2 PAL B/G, SECAM L/L" - }, - { - FI12x6_TYPE_FI1236, - "Philips FI1236 MK2 NTSC M/N North America" - }, - { - FI12x6_TYPE_UNKNOWN, - "Philips FI1256 MK2 SECAM D/K" - }, - { - FI12x6_TYPE_FI1236, - "Philips FM1236 MK2 NTSC M/N North America" - }, - { - FI12x6_TYPE_FI1216, - "Philips FI1216 MK2 PAL B/G - External Tuner POD" - }, - { - FI12x6_TYPE_UNKNOWN, - "Philips FI1246 MK2 PAL I - External Tuner POD" - }, - { - FI12x6_TYPE_FI1216MF, - "Philips FI1216 MF MK2 PAL B/G, SECAM L/L - External Tuner POD" - }, - { - FI12x6_TYPE_FI1236, - "Philips FI1236 MK2 NTSC M/N North America - External Tuner POD" - }, - { - FI12x6_TYPE_TEMIC_FN5AL, - "Temic FN5AL.RF3X7595 PAL I/B/G/DK & SECAM DK" - }, - { - FI12x6_TYPE_FI1216MF, - "Philips FQ1216 ME/P" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (15)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Alps TSBH5 NTSC M/N North America" - }, - { - FI12x6_TYPE_UNKNOWN, - "Alps TSC?? NTSC M/N North America" - }, - { - FI12x6_TYPE_UNKNOWN, - "Alps TSCH5 NTSC M/N North America with FM" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (19)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (20)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (21)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (22)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (23)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (24)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (25)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (26)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (27)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (28)" - }, - { - FI12x6_TYPE_MT2032, - "Microtune MT2032" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (30)" - }, - { - FI12x6_TYPE_UNKNOWN, - "Unknown type (31)" - } -}; diff --git a/src/atituner.h b/src/atituner.h deleted file mode 100644 index 0c3c67f4..00000000 --- a/src/atituner.h +++ /dev/null @@ -1,70 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atituner.h,v 1.1 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATITUNER_H___ -#define ___ATITUNER_H___ 1 - -#include "xf86str.h" - -/* - * TV Tuner definitions. Most of these are from Philips. - */ -typedef enum -{ - ATI_TUNER_NONE, - ATI_TUNER_FI1236MK1NA, - ATI_TUNER_FI1236MK2J, - ATI_TUNER_FI1216MK2BG, - ATI_TUNER_FI1246MK2I, - ATI_TUNER_FI1216MFMK2, - ATI_TUNER_FI1236MK2NA, - ATI_TUNER_FI1256MK2DK, - ATI_TUNER_FM1236MK2NA, - ATI_TUNER_FI1216MK2BGEXT, - ATI_TUNER_FI1246MK2IEXT, - ATI_TUNER_FI1216MFMK2EXT, - ATI_TUNER_FI1236MK2NAEXT, - ATI_TUNER_TEMIC_FN5AL, - ATI_TUNER_FQ1216MEP, - ATI_TUNER_15, - ATI_TUNER_ALPS_TSBH5, - ATI_TUNER_ALPS_TSCXX, - ATI_TUNER_ALPS_TSCH5, - ATI_TUNER_19, - ATI_TUNER_20, - ATI_TUNER_21, - ATI_TUNER_22, - ATI_TUNER_23, - ATI_TUNER_24, - ATI_TUNER_25, - ATI_TUNER_26, - ATI_TUNER_27, - ATI_TUNER_28, - ATI_TUNER_MT2032, - ATI_TUNER_30, - ATI_TUNER_31 -} ATITunerType; - -extern const SymTabRec ATITuners[]; - -#endif /* ___ATITUNER_H___ */ diff --git a/src/atiutil.c b/src/atiutil.c deleted file mode 100644 index e7bb4122..00000000 --- a/src/atiutil.c +++ /dev/null @@ -1,114 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiutil.c,v 1.8 2003/01/01 19:16:34 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "atiutil.h" - -/* - * ATIReduceRatio -- - * - * Reduce a fraction by factoring out the largest common divider of the - * fraction's numerator and denominator. - */ -void -ATIReduceRatio -( - int *Numerator, - int *Denominator -) -{ - int Multiplier, Divider, Remainder; - - Multiplier = *Numerator; - Divider = *Denominator; - - while ((Remainder = Multiplier % Divider)) - { - Multiplier = Divider; - Divider = Remainder; - } - - *Numerator /= Divider; - *Denominator /= Divider; -} - -/* - * ATIDivide -- - * - * Using integer arithmetic and avoiding overflows, this function finds the - * rounded integer that best approximates - * - * Numerator Shift - * ----------- * 2 - * Denominator - * - * using the specified rounding (floor (<0), nearest (=0) or ceiling (>0)). - */ -int -ATIDivide -( - int Numerator, - int Denominator, - int Shift, - const int RoundingKind -) -{ - int Rounding = 0; /* Default to floor */ - -#define MaxInt ((int)((unsigned int)(-1) >> 2)) - - ATIReduceRatio(&Numerator, &Denominator); - - /* Deal with left shifts but try to keep the denominator even */ - if (Denominator & 1) - { - if (Denominator <= MaxInt) - { - Denominator <<= 1; - Shift++; - } - } - else while ((Shift > 0) && !(Denominator & 3)) - { - Denominator >>= 1; - Shift--; - } - - /* Deal with right shifts */ - while (Shift < 0) - { - if ((Numerator & 1) && (Denominator <= MaxInt)) - Denominator <<= 1; - else - Numerator >>= 1; - - Shift++; - } - - if (!RoundingKind) /* Nearest */ - Rounding = Denominator >> 1; - else if (RoundingKind > 0) /* Ceiling */ - Rounding = Denominator - 1; - - return ((Numerator / Denominator) << Shift) + - ((((Numerator % Denominator) << Shift) + Rounding) / Denominator); -} diff --git a/src/atiutil.h b/src/atiutil.h deleted file mode 100644 index f43295d9..00000000 --- a/src/atiutil.h +++ /dev/null @@ -1,70 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiutil.h,v 1.8 2003/01/01 19:16:34 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIUTIL_H___ -#define ___ATIUTIL_H___ 1 - -#include "atiproto.h" - -/* - * Prevent the C standard's insistence on unsigned long sizeof's from causing - * counter-intuitive results. - */ -#define SizeOf(_object) ((int)sizeof(_object)) -#define NumberOf(_what) (SizeOf(_what) / SizeOf(_what[0])) - -#define __ONE_MICROSECOND__ 100 /* This'll need calibration */ - -#define ATIDelay(_microseconds) \ - { \ - unsigned int _i, _j; \ - for (_i = 0; _i < _microseconds; _i++) \ - for (_j = 0; _j < __ONE_MICROSECOND__; _j++) \ - /* Nothing */; \ - } - -/* - * Macros to get/set a contiguous bit field. Arguments should not be - * self-modifying. - */ -#define UnitOf(___Value) \ - (((((___Value) ^ ((___Value) - 1)) + 1) >> 1) | \ - ((((___Value) ^ ((___Value) - 1)) >> 1) + 1)) - -#define GetBits(__Value, _Mask) (((__Value) & (_Mask)) / UnitOf(_Mask)) -#define SetBits(__Value, _Mask) (((__Value) * UnitOf(_Mask)) & (_Mask)) - -#define MaxBits(__Mask) GetBits(__Mask, __Mask) - -#define _ByteMask(__Byte) ((CARD8)(-1) << (8 * (__Byte))) -#define GetByte(_Value, _Byte) GetBits(_Value, _ByteMask(_Byte)) -#define SetByte(_Value, _Byte) SetBits(_Value, _ByteMask(_Byte)) - -#define _WordMask(__Word) ((CARD16)(-1) << (16 * (__Word))) -#define GetWord(_Value, _Word) GetBits(_Value, _WordMask(_Word)) -#define SetWord(_Value, _Word) SetBits(_Value, _WordMask(_Word)) - -extern void ATIReduceRatio FunctionPrototype((int *, int *)); -extern int ATIDivide FunctionPrototype((int, int, int, const int)); - -#endif /* ___ATIUTIL_H___ */ diff --git a/src/ativalid.c b/src/ativalid.c deleted file mode 100644 index 7c798883..00000000 --- a/src/ativalid.c +++ /dev/null @@ -1,235 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ativalid.c,v 1.16 2003/04/23 21:51:31 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "atiadapter.h" -#include "atichip.h" -#include "aticrtc.h" -#include "atistruct.h" -#include "ativalid.h" - -#include "xf86.h" - -/* - * ATIValidMode -- - * - * This checks for hardware-related limits on mode timings. - */ -int -ATIValidMode -( - int iScreen, - DisplayModePtr pMode, - Bool Verbose, - int flags -) -{ - ScrnInfoPtr pScreenInfo = xf86Screens[iScreen]; - ATIPtr pATI = ATIPTR(pScreenInfo); - Bool InterlacedSeen; - int HBlankWidth, HAdjust, VScan, VInterlace; - -#ifndef AVOID_CPIO - - int VDisplay, VTotal; - -#endif /* AVOID_CPIO */ - - if (flags & MODECHECK_FINAL) - { - /* - * This is the final check before the common layer accepts a mode. - * pScreenInfo->displayWidth is set to the proposed virtual pitch - * should the mode be accepted. The only check needed here is for - * 18800's and 28800's, which don't support interlaced modes if the - * pitch is over half the chipset's maximum pitch. - */ - if (pATI->MaximumInterlacedPitch) - { - /* - * Ensure no interlaced modes have a scanline pitch larger than the - * limit. - */ - if (pMode->Flags & V_INTERLACE) - InterlacedSeen = TRUE; - else - InterlacedSeen = pATI->InterlacedSeen; - - if (InterlacedSeen && - (pScreenInfo->displayWidth > pATI->MaximumInterlacedPitch)) - return MODE_INTERLACE_WIDTH; - - pATI->InterlacedSeen = InterlacedSeen; - } - - return MODE_OK; - } - - /* - * The following is done for every mode in the monitor section that - * survives the common layer's basic checks. - */ - if (pMode->VScan <= 1) - VScan = 1; - else - VScan = pMode->VScan; - - if (pMode->Flags & V_DBLSCAN) - VScan <<= 1; - - if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0)) - { - if ((pMode->CrtcHDisplay > pATI->LCDHorizontal) || - (pMode->CrtcVDisplay > pATI->LCDVertical)) - return MODE_PANEL; - - if (!pATI->OptionLCDSync || (pMode->type & M_T_BUILTIN)) - { - if ((pMode->HDisplay > pATI->LCDHorizontal) || - (pMode->VDisplay > pATI->LCDVertical)) - return MODE_PANEL; - - return MODE_OK; - } - - /* - * Adjust effective timings for monitor checks. Here the modeline - * clock is ignored. Horizontal timings are scaled by the stretch - * ratio used for the displayed area. The vertical porch is scaled by - * the native resolution's aspect ratio. This seems rather arbitrary, - * and it is, but it does make all applicable VESA modes sync on a - * panel after stretching. This has the unfortunate, but necessary, - * side-effect of changing the mode's horizontal sync and vertical - * refresh rates. With some exceptions, this tends to increase the - * mode's horizontal sync rate, and decrease its vertical refresh rate. - */ - pMode->SynthClock = pATI->LCDClock; - - pMode->CrtcHTotal = pMode->CrtcHBlankEnd = - ATIDivide(pMode->CrtcHTotal * pATI->LCDHorizontal, - pMode->CrtcHDisplay, -3, 1) << 3; - pMode->CrtcHSyncEnd = - ATIDivide(pMode->CrtcHSyncEnd * pATI->LCDHorizontal, - pMode->CrtcHDisplay, -3, 1) << 3; - pMode->CrtcHSyncStart = - ATIDivide(pMode->CrtcHSyncStart * pATI->LCDHorizontal, - pMode->CrtcHDisplay, -3, -1) << 3; - pMode->CrtcHDisplay = pMode->CrtcHBlankStart = pATI->LCDHorizontal; - - pMode->CrtcVTotal = pMode->CrtcVBlankEnd = - ATIDivide((pMode->CrtcVTotal - pMode->CrtcVDisplay) * - pATI->LCDVertical, pATI->LCDHorizontal, 0, 1) + - pATI->LCDVertical; - pMode->CrtcVSyncEnd = - ATIDivide((pMode->CrtcVSyncEnd - pMode->CrtcVDisplay) * - pATI->LCDVertical, pATI->LCDHorizontal, 0, 1) + - pATI->LCDVertical; - pMode->CrtcVSyncStart = - ATIDivide((pMode->CrtcVSyncStart - pMode->CrtcVDisplay) * - pATI->LCDVertical, pATI->LCDHorizontal, 0, -1) + - pATI->LCDVertical; - pMode->CrtcVDisplay = pMode->CrtcVBlankStart = pATI->LCDVertical; - - /* - * The CRTC only stretches the mode's displayed area, not its porches. - * Reverse-engineer the mode's timings back into the user specified - * values so that the stretched mode is produced when the CRTC is - * eventually programmed. The reverse-engineered mode is then checked - * against CRTC limits below. - */ - pMode->Clock = pATI->LCDClock; - - HAdjust = pATI->LCDHorizontal - pMode->HDisplay; -# define ATIReverseHorizontal(_x) \ - (pMode->_x - HAdjust) - - pMode->HSyncStart = ATIReverseHorizontal(CrtcHSyncStart); - pMode->HSyncEnd = ATIReverseHorizontal(CrtcHSyncEnd); - pMode->HTotal = ATIReverseHorizontal(CrtcHTotal); - - VInterlace = GetBits(pMode->Flags, V_INTERLACE) + 1; -# define ATIReverseVertical(_y) \ - ((((pMode->_y - pATI->LCDVertical) * VInterlace) / VScan) + \ - pMode->VDisplay) - - pMode->VSyncStart = ATIReverseVertical(CrtcVSyncStart); - pMode->VSyncEnd = ATIReverseVertical(CrtcVSyncEnd); - pMode->VTotal = ATIReverseVertical(CrtcVTotal); - -# undef ATIReverseHorizontal -# undef ATIReverseVertical - } - - HBlankWidth = (pMode->HTotal >> 3) - (pMode->HDisplay >> 3); - if (!HBlankWidth) - return MODE_HBLANK_NARROW; - - switch (pATI->NewHW.crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - /* Prevent overscans */ - if (HBlankWidth > 63) - return MODE_HBLANK_WIDE; - - if (pMode->HDisplay > 2048) - return MODE_BAD_HVALUE; - - if (VScan > 64) - return MODE_BAD_VSCAN; - - VDisplay = pMode->VDisplay * VScan; - VTotal = pMode->VTotal * VScan; - - if ((pMode->Flags & V_INTERLACE) && (pATI->Chip < ATI_CHIP_264CT)) - { - VDisplay >>= 1; - VTotal >>= 1; - } - - if ((VDisplay > 2048) || (VTotal > 2050)) - return MODE_BAD_VVALUE; - - if (pATI->Adapter != ATI_ADAPTER_VGA) - break; - - if ((VDisplay > 1024) || (VTotal > 1025)) - return MODE_BAD_VVALUE; - - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - if (VScan > 2) - return MODE_NO_VSCAN; - - break; - - default: - break; - } - - return MODE_OK; -} diff --git a/src/ativalid.h b/src/ativalid.h deleted file mode 100644 index 055ed509..00000000 --- a/src/ativalid.h +++ /dev/null @@ -1,33 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ativalid.h,v 1.8 2003/01/01 19:16:34 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIVALID_H___ -#define ___ATIVALID_H___ 1 - -#include "atiproto.h" - -#include "xf86str.h" - -extern int ATIValidMode FunctionPrototype((int, DisplayModePtr, Bool, int)); - -#endif /* ___ATIVALID_H___ */ diff --git a/src/ativersion.h b/src/ativersion.h deleted file mode 100644 index e41618d6..00000000 --- a/src/ativersion.h +++ /dev/null @@ -1,58 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ativersion.h,v 1.62 2003/07/24 22:08:28 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIVERSION_H___ -#define ___ATIVERSION_H___ 1 - -#undef ATI_NAME -#undef ATI_DRIVER_NAME -#undef ATI_VERSION_MAJOR -#undef ATI_VERSION_MINOR -#undef ATI_VERSION_PATCH -#undef ATI_VERSION_CURRENT -#undef ATI_VERSION_EVALUATE -#undef ATI_VERSION_STRINGIFY -#undef ATI_VERSION_NAME - -#define ATI_NAME "ATI" -#define ATI_DRIVER_NAME "ati" - -#define ATI_VERSION_MAJOR 6 -#define ATI_VERSION_MINOR 5 -#define ATI_VERSION_PATCH 3 - -#ifndef ATI_VERSION_EXTRA -#define ATI_VERSION_EXTRA "" -#endif - -#define ATI_VERSION_CURRENT \ - ((ATI_VERSION_MAJOR << 20) | (ATI_VERSION_MINOR << 10) | ATI_VERSION_PATCH) - -#define ATI_VERSION_EVALUATE(__x) #__x -#define ATI_VERSION_STRINGIFY(_x) ATI_VERSION_EVALUATE(_x) -#define ATI_VERSION_NAME \ - ATI_VERSION_STRINGIFY(ATI_VERSION_MAJOR) "." \ - ATI_VERSION_STRINGIFY(ATI_VERSION_MINOR) "." \ - ATI_VERSION_STRINGIFY(ATI_VERSION_PATCH) ATI_VERSION_EXTRA - -#endif /* ___ATIVERSION_H___ */ diff --git a/src/ativga.c b/src/ativga.c deleted file mode 100644 index 62edf02f..00000000 --- a/src/ativga.c +++ /dev/null @@ -1,534 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ativga.c,v 1.20 2003/04/23 21:51:31 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atichip.h" -#include "atimono.h" -#include "atistruct.h" -#include "ativga.h" -#include "ativgaio.h" - -#ifndef DPMS_SERVER -# define DPMS_SERVER -#endif -#include "extensions/dpms.h" - -#ifndef AVOID_CPIO - -/* - * ATIVGAPreInit -- - * - * This function is called to set up VGA-related data that is common to all - * video modes generated by the driver. - */ -void -ATIVGAPreInit -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - int Index; - - /* Initialise sequencer register values */ - pATIHW->seq[0] = 0x03U; - if (pATI->depth == 1) - pATIHW->seq[2] = 0x01U << BIT_PLANE; - else - pATIHW->seq[2] = 0x0FU; - if (pATI->depth <= 4) - pATIHW->seq[4] = 0x06U; - else if (pATI->Adapter == ATI_ADAPTER_VGA) - pATIHW->seq[4] = 0x0EU; - else - pATIHW->seq[4] = 0x0AU; - - /* Initialise CRTC register values */ - if ((pATI->depth >= 8) && - ((pATI->Chip >= ATI_CHIP_264CT) || - (pATI->CPIO_VGAWonder && - (pATI->Chip <= ATI_CHIP_18800_1) && - (pATI->VideoRAM == 256)))) - pATIHW->crt[19] = pATI->displayWidth >> 3; - else - pATIHW->crt[19] = pATI->displayWidth >> 4; - if ((pATI->depth >= 8) && (pATI->Adapter == ATI_ADAPTER_VGA)) - pATIHW->crt[23] = 0xC3U; - else - pATIHW->crt[23] = 0xE3U; - pATIHW->crt[24] = 0xFFU; - - /* Initialise attribute controller register values */ - if (pATI->depth == 1) - { - Bool FlipPixels = xf86GetFlipPixels(); - - for (Index = 0; Index < 16; Index++) - if (((Index & (0x01U << BIT_PLANE)) != 0) != FlipPixels) - pATIHW->attr[Index] = MONO_WHITE; - else - pATIHW->attr[Index] = MONO_BLACK; - pATIHW->attr[16] = 0x01U; - pATIHW->attr[17] = MONO_OVERSCAN; - } - else - { - for (Index = 0; Index < 16; Index++) - pATIHW->attr[Index] = Index; - if (pATI->depth <= 4) - pATIHW->attr[16] = 0x81U; - else if (pATI->Adapter == ATI_ADAPTER_VGA) - pATIHW->attr[16] = 0x41U; - else - pATIHW->attr[16] = 0x01U; - pATIHW->attr[17] = 0xFFU; - } - pATIHW->attr[18] = 0x0FU; - - /* Initialise graphics controller register values */ - if (pATI->depth == 1) - pATIHW->gra[4] = BIT_PLANE; - else if (pATI->depth <= 4) - pATIHW->gra[5] = 0x02U; - else if (pATI->Chip >= ATI_CHIP_264CT) - pATIHW->gra[5] = 0x40U; - if (pATI->UseSmallApertures && (pATI->Chip >= ATI_CHIP_264CT) && - ((pATI->Chip >= ATI_CHIP_264VT) || !pATI->LinearBase)) - pATIHW->gra[6] = 0x01U; /* 128kB aperture */ - else - pATIHW->gra[6] = 0x05U; /* 64kB aperture */ - pATIHW->gra[7] = 0x0FU; - pATIHW->gra[8] = 0xFFU; -} - -/* - * ATIVGASave -- - * - * This function is called to save the VGA portion of the current video state. - */ -void -ATIVGASave -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - int Index; - - /* Save miscellaneous output register */ - pATIHW->genmo = inb(R_GENMO); - ATISetVGAIOBase(pATI, pATIHW->genmo); - - /* Save sequencer registers */ - for (Index = 0; Index < NumberOf(pATIHW->seq); Index++) - pATIHW->seq[Index] = GetReg(SEQX, Index); - - /* Save CRTC registers */ - for (Index = 0; Index < NumberOf(pATIHW->crt); Index++) - pATIHW->crt[Index] = GetReg(CRTX(pATI->CPIO_VGABase), Index); - - /* Save attribute controller registers */ - for (Index = 0; Index < NumberOf(pATIHW->attr); Index++) - { - (void)inb(GENS1(pATI->CPIO_VGABase)); /* Reset flip-flop */ - pATIHW->attr[Index] = GetReg(ATTRX, Index); - } - - /* Save graphics controller registers */ - for (Index = 0; Index < NumberOf(pATIHW->gra); Index++) - pATIHW->gra[Index] = GetReg(GRAX, Index); -} - -/* - * ATIVGACalculate -- - * - * This function fills in the VGA portion of an ATIHWRec. - */ -void -ATIVGACalculate -( - ATIPtr pATI, - ATIHWPtr pATIHW, - DisplayModePtr pMode -) -{ - int Index, VDisplay; - - /* If not already done, adjust horizontal timings */ - if (!pMode->CrtcHAdjusted) - { - pMode->CrtcHAdjusted = TRUE; - pMode->CrtcHDisplay = (pMode->HDisplay >> 3) - 1; - pMode->CrtcHBlankStart = (pMode->HDisplay >> 3); - if ((pATI->Chip == ATI_CHIP_18800_1) || - (pATI->Chip >= ATI_CHIP_264CT)) - pMode->CrtcHBlankStart--; - pMode->CrtcHSyncStart = pMode->HSyncStart >> 3; - pMode->CrtcHSyncEnd = pMode->HSyncEnd >> 3; - pMode->CrtcHBlankEnd = (pMode->HTotal >> 3) - 1; - pMode->CrtcHTotal = (pMode->HTotal >> 3) - 5; - pMode->CrtcHSkew = pMode->HSkew; - - /* Check sync pulse width */ - Index = pMode->CrtcHSyncEnd - pMode->CrtcHSyncStart - 0x1F; - if (Index > 0) - { - pMode->CrtcHSyncStart += Index / 2; - pMode->CrtcHSyncEnd = pMode->CrtcHSyncStart + 0x1F; - } - - /* Check blank pulse width */ - Index = pMode->CrtcHBlankEnd - pMode->CrtcHBlankStart - 0x3F; - if (Index > 0) - { - if ((pMode->CrtcHBlankEnd - Index) > pMode->CrtcHSyncEnd) - { - pMode->CrtcHBlankStart += Index / 2; - if (pMode->CrtcHBlankStart >= pMode->CrtcHSyncStart) - pMode->CrtcHBlankStart = pMode->CrtcHSyncStart - 1; - pMode->CrtcHBlankEnd = pMode->CrtcHBlankStart + 0x3F; - } - else - { - Index -= 0x40; - if (Index > 0) - { - pMode->CrtcHBlankStart += Index / 2; - if (pMode->CrtcHBlankStart >= pMode->CrtcHSyncStart) - pMode->CrtcHBlankStart = pMode->CrtcHSyncStart - 1; - pMode->CrtcHBlankEnd = pMode->CrtcHBlankStart + 0x7F; - } - } - } - } - - /* - * Because of the use of CRTC[23] bit 0x04's for vertical doubling, it is - * necessary to always re-adjust vertical timings here. - */ - pMode->CrtcVDisplay = pMode->VDisplay; - pMode->CrtcVBlankStart = pMode->VDisplay; - pMode->CrtcVSyncStart = pMode->VSyncStart; - pMode->CrtcVSyncEnd = pMode->VSyncEnd; - pMode->CrtcVBlankEnd = pMode->VTotal; - pMode->CrtcVTotal = pMode->VTotal; - - /* Adjust for doublescanned modes */ - if (pMode->Flags & V_DBLSCAN) - { - pMode->CrtcVDisplay <<= 1; - pMode->CrtcVBlankStart <<= 1; - pMode->CrtcVSyncStart <<= 1; - pMode->CrtcVSyncEnd <<= 1; - pMode->CrtcVBlankEnd <<= 1; - pMode->CrtcVTotal <<= 1; - } - - /* Adjust for multiscanned modes */ - if (pMode->VScan > 1) - { - pMode->CrtcVDisplay *= pMode->VScan; - pMode->CrtcVBlankStart *= pMode->VScan; - pMode->CrtcVSyncStart *= pMode->VScan; - pMode->CrtcVSyncEnd *= pMode->VScan; - pMode->CrtcVBlankEnd *= pMode->VScan; - pMode->CrtcVTotal *= pMode->VScan; - } - - /* Set up miscellaneous output register value */ - pATIHW->genmo = 0x23U; - if ((pMode->Flags & (V_PHSYNC | V_NHSYNC)) && - (pMode->Flags & (V_PVSYNC | V_NVSYNC))) - { - if (pMode->Flags & V_NHSYNC) - pATIHW->genmo |= 0x40U; - if (pMode->Flags & V_NVSYNC) - pATIHW->genmo |= 0x80U; - } - else - { - pMode->Flags &= ~(V_PHSYNC | V_NHSYNC | V_PVSYNC | V_NVSYNC); - - if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0)) - VDisplay = pATI->LCDVertical; - else - VDisplay = pMode->CrtcVDisplay; - - if (VDisplay < 400) - { - pMode->Flags |= V_PHSYNC | V_NVSYNC; - pATIHW->genmo |= 0x80U; - } - else if (VDisplay < 480) - { - pMode->Flags |= V_NHSYNC | V_PVSYNC; - pATIHW->genmo |= 0x40U; - } - else if (VDisplay < 768) - { - pMode->Flags |= V_NHSYNC | V_NVSYNC; - pATIHW->genmo |= 0xC0U; - } - else - { - pMode->Flags |= V_PHSYNC | V_PVSYNC; - } - } - - /* Adjust for interlaced modes */ - if ((pMode->Flags & V_INTERLACE) && (pATI->Chip < ATI_CHIP_264CT)) - { - pMode->CrtcVDisplay >>= 1; - pMode->CrtcVBlankStart >>= 1; - pMode->CrtcVSyncStart >>= 1; - pMode->CrtcVSyncEnd >>= 1; - pMode->CrtcVBlankEnd >>= 1; - pMode->CrtcVTotal >>= 1; - } - - if (pMode->CrtcVTotal > 1024) - { - pATIHW->crt[23] |= 0x04U; - pMode->CrtcVDisplay >>= 1; - pMode->CrtcVBlankStart >>= 1; - pMode->CrtcVSyncStart >>= 1; - pMode->CrtcVSyncEnd >>= 1; - pMode->CrtcVBlankEnd >>= 1; - pMode->CrtcVTotal >>= 1; - } - else - { - pATIHW->crt[23] &= ~0x04U; - } - - pMode->CrtcVDisplay--; - if (pATI->Chip == ATI_CHIP_18800) - pMode->CrtcVBlankStart++; - else - pMode->CrtcVBlankStart--; - pMode->CrtcVBlankEnd--; - if (pATI->Chip < ATI_CHIP_264CT) - pMode->CrtcVBlankEnd--; - pMode->CrtcVTotal -= 2; - pMode->CrtcVAdjusted = TRUE; /* Redundant */ - - /* Check sync pulse width */ - Index = pMode->CrtcVSyncEnd - pMode->CrtcVSyncStart - 0x0F; - if (Index > 0) - { - pMode->CrtcVSyncStart += Index / 2; - pMode->CrtcVSyncEnd = pMode->CrtcVSyncStart + 0x0F; - } - - /* Check blank pulse width */ - Index = pMode->CrtcVBlankEnd - pMode->CrtcVBlankStart - 0x00FF; - if (Index > 0) - { - if ((pMode->CrtcVBlankEnd - Index) > pMode->CrtcVSyncEnd) - { - pMode->CrtcVBlankStart += Index / 2; - if (pMode->CrtcVBlankStart >= pMode->CrtcVSyncStart) - pMode->CrtcVBlankStart = pMode->CrtcVSyncStart - 1; - pMode->CrtcVBlankEnd = pMode->CrtcVBlankStart + 0x00FF; - } - else - { - Index -= 0x0100; - if (Index > 0) - { - pMode->CrtcVBlankStart += Index / 2; - if (pMode->CrtcVBlankStart >= pMode->CrtcVSyncStart) - pMode->CrtcVBlankStart = pMode->CrtcVSyncStart - 1; - pMode->CrtcVBlankEnd = pMode->CrtcVBlankStart + 0x01FF; - } - } - } - - /* Set up sequencer register values */ - if (pMode->Flags & V_CLKDIV2) - pATIHW->seq[1] = 0x09U; - else - pATIHW->seq[1] = 0x01U; - - /* Set up CRTC register values */ - pATIHW->crt[0] = pMode->CrtcHTotal; - pATIHW->crt[1] = pMode->CrtcHDisplay; - pATIHW->crt[2] = pMode->CrtcHBlankStart; - pATIHW->crt[3] = (pMode->CrtcHBlankEnd & 0x1FU) | 0x80U; - Index = ((pMode->CrtcHSkew << 2) + 0x10U) & ~0x1FU; - if (Index < 0x0080) - pATIHW->crt[3] |= Index; - pATIHW->crt[4] = pMode->CrtcHSyncStart; - pATIHW->crt[5] = ((pMode->CrtcHBlankEnd & 0x20U) << 2) | - ((pMode->CrtcHSyncEnd & 0x1FU) ); - pATIHW->crt[6] = pMode->CrtcVTotal & 0xFFU; - pATIHW->crt[7] = ((pMode->CrtcVTotal & 0x0100U) >> 8) | - ((pMode->CrtcVDisplay & 0x0100U) >> 7) | - ((pMode->CrtcVSyncStart & 0x0100U) >> 6) | - ((pMode->CrtcVBlankStart & 0x0100U) >> 5) | - 0x10U | - ((pMode->CrtcVTotal & 0x0200U) >> 4) | - ((pMode->CrtcVDisplay & 0x0200U) >> 3) | - ((pMode->CrtcVSyncStart & 0x0200U) >> 2); - pATIHW->crt[9] = ((pMode->CrtcVBlankStart & 0x0200U) >> 4) | 0x40U; - /* - * Doublescanned modes are missing the top scanline. Convert - * doublescanning to multiscanning, using the doublescan bit only as a last - * resort. - */ - if ((Index = pMode->VScan) <= 0) - Index = 1; - if (pMode->Flags & V_DBLSCAN) - Index <<= 1; - Index--; - pATIHW->crt[9] |= (Index & 0x1FU) | ((Index & 0x20U) << 2); - pATIHW->crt[16] = pMode->CrtcVSyncStart & 0xFFU; - pATIHW->crt[17] = (pMode->CrtcVSyncEnd & 0x0FU) | 0x20U; - pATIHW->crt[18] = pMode->CrtcVDisplay & 0xFFU; - pATIHW->crt[21] = pMode->CrtcVBlankStart & 0xFFU; - pATIHW->crt[22] = pMode->CrtcVBlankEnd & 0xFFU; -} - -/* - * ATIVGASet -- - * - * This function is called to load the VGA portion of a video state. - */ -void -ATIVGASet -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - int Index; - - /* Set VGA I/O base */ - ATISetVGAIOBase(pATI, pATIHW->genmo); - - /* Load miscellaneous output register */ - outb(GENMO, pATIHW->genmo); - - /* Load sequencer in reverse index order; this also ends its reset */ - for (Index = NumberOf(pATIHW->seq); --Index >= 0; ) - PutReg(SEQX, Index, pATIHW->seq[Index]); - - /* Load CRTC registers */ - for (Index = 0; Index < NumberOf(pATIHW->crt); Index++) - PutReg(CRTX(pATI->CPIO_VGABase), Index, pATIHW->crt[Index]); - - /* Load attribute controller registers */ - for (Index = 0; Index < NumberOf(pATIHW->attr); Index++) - { - (void)inb(GENS1(pATI->CPIO_VGABase)); /* Reset flip-flop & delay */ - outb(ATTRX, Index); - outb(ATTRX, pATIHW->attr[Index]); - } - - /* Load graphics controller registers */ - for (Index = 0; Index < NumberOf(pATIHW->gra); Index++) - PutReg(GRAX, Index, pATIHW->gra[Index]); -} - -/* - * ATIVGASaveScreen -- - * - * This function blanks or unblanks a VGA screen. - */ -void -ATIVGASaveScreen -( - ATIPtr pATI, - int Mode -) -{ - (void)inb(GENS1(pATI->CPIO_VGABase)); /* Reset flip-flop */ - - switch (Mode) - { - case SCREEN_SAVER_OFF: - case SCREEN_SAVER_FORCER: - outb(ATTRX, 0x20U); /* Turn PAS on */ - break; - - case SCREEN_SAVER_ON: - case SCREEN_SAVER_CYCLE: - outb(ATTRX, 0x00U); /* Turn PAS off */ - break; - - default: - break; - } -} - -/* - * ATIVGASetDPMSMode -- - * - * This function sets a VGA's VESA Display Power Management Signaling mode. - */ -void -ATIVGASetDPMSMode -( - ATIPtr pATI, - int DPMSMode -) -{ - CARD8 seq1, crt17; - - switch (DPMSMode) - { - case DPMSModeOn: /* HSync on, VSync on */ - seq1 = 0x00U; - crt17 = 0x80U; - break; - - case DPMSModeStandby: /* HSync off, VSync on -- unsupported */ - seq1 = 0x20U; - crt17 = 0x80U; - break; - - case DPMSModeSuspend: /* HSync on, VSync off -- unsupported */ - seq1 = 0x20U; - crt17 = 0x80U; - break; - - case DPMSModeOff: /* HSync off, VSync off */ - seq1 = 0x20U; - crt17 = 0x00U; - break; - - default: /* Muffle compiler */ - return; - } - - PutReg(SEQX, 0x00U, 0x01U); /* Start synchonous reset */ - seq1 |= GetReg(SEQX, 0x01U) & ~0x20U; - PutReg(SEQX, 0x01U, seq1); - crt17 |= GetReg(CRTX(pATI->CPIO_VGABase), 0x17U) & ~0x80U; - usleep(10000); - PutReg(CRTX(pATI->CPIO_VGABase), 0x17U, crt17); - PutReg(SEQX, 0x01U, 0x03U); /* End synchonous reset */ -} - -#endif /* AVOID_CPIO */ diff --git a/src/ativga.h b/src/ativga.h deleted file mode 100644 index ff65b354..00000000 --- a/src/ativga.h +++ /dev/null @@ -1,45 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ativga.h,v 1.10 2003/01/01 19:16:34 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIVGA_H___ -#define ___ATIVGA_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -#ifndef AVOID_CPIO - -extern void ATIVGAPreInit FunctionPrototype((ATIPtr, ATIHWPtr)); -extern void ATIVGASave FunctionPrototype((ATIPtr, ATIHWPtr)); -extern void ATIVGACalculate FunctionPrototype((ATIPtr, ATIHWPtr, - DisplayModePtr)); -extern void ATIVGASet FunctionPrototype((ATIPtr, ATIHWPtr)); - -extern void ATIVGASaveScreen FunctionPrototype((ATIPtr, int)); -extern void ATIVGASetDPMSMode FunctionPrototype((ATIPtr, int)); - -#endif /* AVOID_CPIO */ - -#endif /* ___ATIVGA_H___ */ diff --git a/src/ativgaio.c b/src/ativgaio.c deleted file mode 100644 index def54e24..00000000 --- a/src/ativgaio.c +++ /dev/null @@ -1,46 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ativgaio.c,v 1.4 2003/01/01 19:16:34 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atistruct.h" -#include "ativgaio.h" - -#ifndef AVOID_CPIO - -/* - * ATISetVGAIOBase -- - * - * This sets vgaIOBase according to the value of the passed value of the - * miscellaneous output register. - */ -void -ATISetVGAIOBase -( - ATIPtr pATI, - const CARD8 misc -) -{ - pATI->CPIO_VGABase = (misc & 0x01U) ? ColourIOBase : MonochromeIOBase; -} - -#endif /* AVOID_CPIO */ diff --git a/src/ativgaio.h b/src/ativgaio.h deleted file mode 100644 index e08ecff8..00000000 --- a/src/ativgaio.h +++ /dev/null @@ -1,56 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ativgaio.h,v 1.5 2003/01/01 19:16:34 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIVGAIO_H___ - -#if !defined(___ATI_H___) && defined(XFree86Module) -# error missing #include "ati.h" before #include "ativgaio.h" -# undef XFree86Module -#endif - -#define ___ATIVGAIO_H___ 1 - -#include "atiio.h" -#include "atipriv.h" -#include "atiproto.h" - -#ifndef AVOID_CPIO - -extern void ATISetVGAIOBase FunctionPrototype((ATIPtr, const CARD8)); - -/* Odds and ends to ease reading and writting of indexed registers */ -#define GetReg(_Register, _Index) \ - ( \ - outb(_Register, _Index), \ - inb((_Register) + 1) \ - ) -#define PutReg(_Register, _Index, _Value) \ - do \ - { \ - outb(_Register, _Index); \ - outb((_Register) + 1, _Value); \ - } while (0) - -#endif /* AVOID_CPIO */ - -#endif /* ___ATIVGAIO_H___ */ diff --git a/src/atividmem.c b/src/atividmem.c deleted file mode 100644 index 1b866598..00000000 --- a/src/atividmem.c +++ /dev/null @@ -1,417 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atividmem.c,v 1.15 2003/04/23 21:51:31 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atistruct.h" -#include "atividmem.h" - -/* Memory types for 68800's and 88800GX's */ -const char *ATIMemoryTypeNames_Mach[] = -{ - "DRAM (256Kx4)", - "VRAM (256Kx4, x8, x16)", - "VRAM (256Kx16 with short shift register)", - "DRAM (256Kx16)", - "Graphics DRAM (256Kx16)", - "Enhanced VRAM (256Kx4, x8, x16)", - "Enhanced VRAM (256Kx16 with short shift register)", - "Unknown video memory type" -}; - -/* Memory types for 88800CX's */ -const char *ATIMemoryTypeNames_88800CX[] = -{ - "DRAM (256Kx4, x8, x16)", - "EDO DRAM (256Kx4, x8, x16)", - "Unknown video memory type", - "DRAM (256Kx16 with assymetric RAS/CAS)", - "Unknown video memory type", - "Unknown video memory type", - "Unknown video memory type", - "Unknown video memory type" -}; - -/* Memory types for 264xT's */ -const char *ATIMemoryTypeNames_264xT[] = -{ - "Disabled video memory", - "DRAM", - "EDO DRAM", - "Pseudo-EDO DRAM", - "SDRAM (1:1)", - "SGRAM (1:1)", - "SGRAM (2:1) 32-bit", - "Unknown video memory type" -}; - -#ifndef AVOID_CPIO - -/* - * ATIUnmapVGA -- - * - * Unmap VGA aperture. - */ -static void -ATIUnmapVGA -( - int iScreen, - ATIPtr pATI -) -{ - if (!pATI->pBank) - return; - - xf86UnMapVidMem(iScreen, pATI->pBank, 0x00010000U); - - pATI->pBank = pATI->BankInfo.pBankA = pATI->BankInfo.pBankB = NULL; -} - -#endif /* AVOID_CPIO */ - -/* - * ATIUnmapLinear -- - * - * Unmap linear aperture. - */ -static void -ATIUnmapLinear -( - int iScreen, - ATIPtr pATI -) -{ - -#ifdef AVOID_CPIO - - if (!pATI->pMemory) - return; - -#else /* AVOID_CPIO */ - - if (pATI->pMemory != pATI->pBank) - -#endif /* AVOID_CPIO */ - - { - xf86UnMapVidMem(iScreen, pATI->pMemory, pATI->LinearSize); - -#if X_BYTE_ORDER != X_LITTLE_ENDIAN - - if (pATI->pMemoryLE) - xf86UnMapVidMem(iScreen, pATI->pMemoryLE, pATI->LinearSize); - -#endif /* X_BYTE_ORDER */ - - } - - pATI->pMemory = pATI->pMemoryLE = NULL; -} - -/* - * ATIUnmapMMIO -- - * - * Unmap MMIO registers. - */ -static void -ATIUnmapMMIO -( - int iScreen, - ATIPtr pATI -) -{ - if (pATI->pMMIO) - xf86UnMapVidMem(iScreen, pATI->pMMIO, getpagesize()); - - pATI->pMMIO = pATI->pBlock[0] = pATI->pBlock[1] = NULL; -} - -/* - * ATIUnmapCursor -- - * - * Unmap hardware cursor image area. - */ -static void -ATIUnmapCursor -( - int iScreen, - ATIPtr pATI -) -{ - if (pATI->pCursorPage) - xf86UnMapVidMem(iScreen, pATI->pCursorPage, getpagesize()); - - pATI->pCursorPage = pATI->pCursorImage = NULL; -} - -/* - * ATIMapApertures -- - * - * This function maps all apertures used by the driver. - */ -Bool -ATIMapApertures -( - int iScreen, - ATIPtr pATI -) -{ - pciVideoPtr pVideo; - PCITAG Tag; - unsigned long PageSize; - - if (pATI->Mapped) - return TRUE; - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - -#endif /* AVOID_CPIO */ - - { - if (!pATI->LinearBase && !pATI->Block0Base) - return FALSE; - } - - PageSize = getpagesize(); - - if ((pVideo = pATI->PCIInfo)) - Tag = ((pciConfigPtr)(pVideo->thisCard))->tag; - else - Tag = 0; - -#ifndef AVOID_CPIO - - /* Map VGA aperture */ - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - /* - * No relocation, resizing, caching or write-combining of this - * aperture is supported. Hence, the hard-coded values here... - */ - if (pVideo) - pATI->pBank = xf86MapPciMem(iScreen, VIDMEM_MMIO, - Tag, 0x000A0000U, 0x00010000U); - else - pATI->pBank = xf86MapVidMem(iScreen, VIDMEM_MMIO, - 0x000A0000U, 0x00010000U); - - if (!pATI->pBank) - return FALSE; - - pATI->pMemory = - pATI->BankInfo.pBankA = - pATI->BankInfo.pBankB = pATI->pBank; - - pATI->Mapped = TRUE; - } - -#endif /* AVOID_CPIO */ - - /* Map linear aperture */ - if (pATI->LinearBase) - { - if (pVideo) - pATI->pMemory = xf86MapPciMem(iScreen, VIDMEM_FRAMEBUFFER, - Tag, pATI->LinearBase, pATI->LinearSize); - else - pATI->pMemory = xf86MapVidMem(iScreen, VIDMEM_FRAMEBUFFER, - pATI->LinearBase, pATI->LinearSize); - - if (!pATI->pMemory) - { - -#ifndef AVOID_CPIO - - ATIUnmapVGA(iScreen, pATI); - -#endif /* AVOID_CPIO */ - - pATI->Mapped = FALSE; - return FALSE; - } - - pATI->Mapped = TRUE; - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - - if ((pATI->CursorBase >= pATI->LinearBase) && - ((pATI->CursorOffset + 0x00000400UL) <= (CARD32)pATI->LinearSize)) - pATI->pCursorImage = (char *)pATI->pMemory + pATI->CursorOffset; - - pATI->pMemoryLE = pATI->pMemory; - -#else /* if X_BYTE_ORDER != X_LITTLE_ENDIAN */ - - /* - * Map the little-endian aperture (used for video, etc.). Note that - * caching of this area is _not_ wanted. - */ - if (pVideo) - { - pATI->pMemoryLE = xf86MapPciMem(iScreen, VIDMEM_MMIO, Tag, - pATI->LinearBase - 0x00800000U, pATI->LinearSize); - - if (!pATI->pMemoryLE) - { - ATIUnmapLinear(iScreen, pATI); - -#ifndef AVOID_CPIO - - ATIUnmapVGA(iScreen, pATI); - -#endif /* AVOID_CPIO */ - - pATI->Mapped = FALSE; - return FALSE; - } - } - -#endif /* X_BYTE_ORDER */ - - } - - /* Map MMIO aperture */ - if (pATI->Block0Base) - { - unsigned long MMIOBase = pATI->Block0Base & ~(PageSize - 1); - - if (pVideo) - pATI->pMMIO = xf86MapPciMem(iScreen, VIDMEM_MMIO, - Tag, MMIOBase, PageSize); - else - pATI->pMMIO = xf86MapVidMem(iScreen, VIDMEM_MMIO, - MMIOBase, PageSize); - - if (!pATI->pMMIO) - { - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - - ATIUnmapCursor(iScreen, pATI); - -#endif /* X_BYTE_ORDER */ - - ATIUnmapLinear(iScreen, pATI); - -#ifndef AVOID_CPIO - - ATIUnmapVGA(iScreen, pATI); - -#endif /* AVOID_CPIO */ - - pATI->Mapped = FALSE; - return FALSE; - } - - pATI->Mapped = TRUE; - - pATI->pBlock[0] = (char *)pATI->pMMIO + - (pATI->Block0Base - MMIOBase); - - if (pATI->Block1Base) - pATI->pBlock[1] = (char *)pATI->pBlock[0] - 0x00000400U; - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - - if (!pATI->pCursorImage) - -#endif /* X_BYTE_ORDER */ - - { - if ((pATI->CursorBase >= MMIOBase) && - ((pATI->CursorBase + 0x00000400UL) <= (MMIOBase + PageSize))) - pATI->pCursorImage = (char *)pATI->pMMIO + - (pATI->CursorBase - MMIOBase); - } - } - - /* Map hardware cursor image area */ - if (pATI->CursorBase && !pATI->pCursorImage) - { - unsigned long CursorBase = pATI->CursorBase & ~(PageSize - 1); - - if (pVideo) - pATI->pCursorPage = xf86MapPciMem(iScreen, VIDMEM_FRAMEBUFFER, - Tag, CursorBase, PageSize); - else - pATI->pCursorPage = xf86MapVidMem(iScreen, VIDMEM_FRAMEBUFFER, - CursorBase, PageSize); - - if (!pATI->pCursorPage) - { - ATIUnmapCursor(iScreen, pATI); - ATIUnmapMMIO(iScreen, pATI); - ATIUnmapLinear(iScreen, pATI); - -#ifndef AVOID_CPIO - - ATIUnmapVGA(iScreen, pATI); - -#endif /* AVOID_CPIO */ - - pATI->Mapped = FALSE; - return FALSE; - } - - pATI->pCursorImage = (char *)pATI->pCursorPage + - (pATI->CursorBase - CursorBase); - } - - return TRUE; -} - -/* - * ATIUnmapApertures -- - * - * This function unmaps all apertures used by the driver. - */ -void -ATIUnmapApertures -( - int iScreen, - ATIPtr pATI -) -{ - if (!pATI->Mapped) - return; - pATI->Mapped = FALSE; - - /* Unmap hardware cursor image area */ - ATIUnmapCursor(iScreen, pATI); - - /* Unmap MMIO area */ - ATIUnmapMMIO(iScreen, pATI); - - /* Unmap linear aperture */ - ATIUnmapLinear(iScreen, pATI); - -#ifndef AVOID_CPIO - - /* Unmap VGA aperture */ - ATIUnmapVGA(iScreen, pATI); - -#endif /* AVOID_CPIO */ - -} diff --git a/src/atividmem.h b/src/atividmem.h deleted file mode 100644 index 7e4c26cd..00000000 --- a/src/atividmem.h +++ /dev/null @@ -1,75 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atividmem.h,v 1.9 2003/01/01 19:16:35 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIVIDMEM_H___ -#define ___ATIVIDMEM_H___ 1 - -#include "atiproto.h" -#include "atipriv.h" - -/* Memory types for 68800's and 88800GX's */ -typedef enum -{ - MEM_MACH_DRAMx4, - MEM_MACH_VRAM, - MEM_MACH_VRAMssr, - MEM_MACH_DRAMx16, - MEM_MACH_GDRAM, - MEM_MACH_EVRAM, - MEM_MACH_EVRAMssr, - MEM_MACH_TYPE_7 -} ATIMachMemoryType; -extern const char *ATIMemoryTypeNames_Mach[]; - -/* Memory types for 88800CX's */ -typedef enum -{ - MEM_CX_DRAM, - MEM_CX_EDO, - MEM_CX_TYPE_2, - MEM_CX_DRAM_A, - MEM_CX_TYPE_4, - MEM_CX_TYPE_5, - MEM_CX_TYPE_6, - MEM_CX_TYPE_7 -} ATICXMemoryType; -extern const char *ATIMemoryTypeNames_88800CX[]; - -/* Memory types for 264xT's */ -typedef enum -{ - MEM_264_NONE, - MEM_264_DRAM, - MEM_264_EDO, - MEM_264_PSEUDO_EDO, - MEM_264_SDRAM, - MEM_264_SGRAM, - MEM_264_SGRAM32, - MEM_264_TYPE_7 -} ATI264MemoryType; -extern const char *ATIMemoryTypeNames_264xT[]; - -extern Bool ATIMapApertures FunctionPrototype((int, ATIPtr)); -extern void ATIUnmapApertures FunctionPrototype((int, ATIPtr)); - -#endif /* ___ATIVIDMEM_H___ */ diff --git a/src/atiwonder.c b/src/atiwonder.c deleted file mode 100644 index 404aeaf0..00000000 --- a/src/atiwonder.c +++ /dev/null @@ -1,303 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiwonder.c,v 1.14 2003/01/01 19:16:35 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -/* - * The ATI x8800 chips use special registers for their extended VGA features. - * These registers are accessible through an index I/O port and a data I/O - * port. BIOS initialisation stores the index port number in the Graphics - * register bank (0x03CE), indices 0x50 and 0x51. Unfortunately, for all but - * the 18800-x series of adapters, these registers are write-only (a.k.a. black - * holes). On all but 88800's, the index port number can be found in the short - * integer at offset 0x10 in the BIOS. For 88800's, this driver will use - * 0x01CE or 0x03CE as the index port number, depending on the I/O port - * decoding used. The data port number is one more than the index port number - * (i.e. 0x01CF). These ports differ slightly in their I/O behaviour from the - * normal VGA ones: - * - * write: outw(0x01CE, (data << 8) | index); (16-bit, not used) - * outb(0x01CE, index); outb(0x01CF, data); (8-bit) - * read: outb(0x01CE, index); data = inb(0x01CF); - * - * Two consecutive byte-writes to the data port will not work. Furthermore an - * index written to 0x01CE is usable only once. Note also that the setting of - * ATI extended registers (especially those with clock selection bits) should - * be bracketed by a sequencer reset. - * - * The number of these extended VGA registers varies by chipset. The 18800 - * series have 16, the 28800 series have 32, while 68800's and 88800's have 64. - * The last 16 on each have almost identical definitions. Thus, the BIOS sets - * up an indexing scheme whereby the last 16 extended VGA registers are - * accessed at indices 0xB0 through 0xBF on all chipsets. - */ - -#include "ati.h" -#include "atichip.h" -#include "atiwonder.h" -#include "atiwonderio.h" - -#ifndef AVOID_CPIO - -/* - * ATIVGAWonderPreInit -- - * - * This function is called to initialise the VGA Wonder part of an ATIHWRec - * that is common to all modes generated by the driver. - */ -void -ATIVGAWonderPreInit -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - pATIHW->b3 = ATIGetExtReg(0xB3U) & 0x20U; - if (pATI->depth <= 4) - pATIHW->b6 = 0x40U; - else - pATIHW->b6 = 0x04U; - if (pATI->Chip <= ATI_CHIP_18800) - pATIHW->ba = 0x08U; - else if (pATI->Chip >= ATI_CHIP_28800_2) - { - if (pATI->VideoRAM > 256) - pATIHW->b6 |= 0x01U; - pATIHW->bf = ATIGetExtReg(0xBFU) & 0x5FU; - pATIHW->a3 = ATIGetExtReg(0xA3U) & 0x67U; - pATIHW->ab = ATIGetExtReg(0xABU) & 0xE7U; - pATIHW->ae = ATIGetExtReg(0xAEU) & 0xE0U; - } -} - -/* - * ATIVGAWonderSave -- - * - * This function is called to save the VGA Wonder portion of the current video - * state. - */ -void -ATIVGAWonderSave -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - pATIHW->b0 = ATIGetExtReg(0xB0U); - pATIHW->b1 = ATIGetExtReg(0xB1U); - pATIHW->b2 = ATIGetExtReg(0xB2U); - pATIHW->b3 = ATIGetExtReg(0xB3U); - pATIHW->b5 = ATIGetExtReg(0xB5U); - pATIHW->b6 = ATIGetExtReg(0xB6U); - pATIHW->b8 = ATIGetExtReg(0xB8U); - pATIHW->b9 = ATIGetExtReg(0xB9U); - pATIHW->ba = ATIGetExtReg(0xBAU); - pATIHW->bd = ATIGetExtReg(0xBDU); - if (pATI->Chip > ATI_CHIP_18800) - { - pATIHW->be = ATIGetExtReg(0xBEU); - if (pATI->Chip >= ATI_CHIP_28800_2) - { - pATIHW->bf = ATIGetExtReg(0xBFU); - pATIHW->a3 = ATIGetExtReg(0xA3U); - pATIHW->a6 = ATIGetExtReg(0xA6U); - pATIHW->a7 = ATIGetExtReg(0xA7U); - pATIHW->ab = ATIGetExtReg(0xABU); - pATIHW->ac = ATIGetExtReg(0xACU); - pATIHW->ad = ATIGetExtReg(0xADU); - pATIHW->ae = ATIGetExtReg(0xAEU); - } - } -} - -/* - * ATIVGAWonderCalculate -- - * - * This function fills in the VGA Wonder portion of an ATIHWRec structure - * occurrence. - */ -void -ATIVGAWonderCalculate -( - ATIPtr pATI, - ATIHWPtr pATIHW, - DisplayModePtr pMode -) -{ - /* Set up the default horizontal display enable skew */ - if ((pATI->Chip >= ATI_CHIP_28800_2) && (pATI->Chip <= ATI_CHIP_28800_6) && - !(pMode->Flags & V_HSKEW)) - { - /* - * Modes using the higher clock frequencies need a non-zero Display - * Enable Skew. The following number has been empirically determined - * to be somewhere between 4.2 and 4.7 MHz. - */ -# define DisplayEnableSkewThreshold 4500 - - /* Set a reasonable default Display Enable Skew */ - pMode->HSkew = pMode->CrtcHSkew = - ATIDivide(pMode->SynthClock, DisplayEnableSkewThreshold, 0, 0); - } - pMode->Flags |= V_HSKEW; - - /* - * Fill in mode-specific VGA Wonder data. - */ - pATIHW->b0 = 0x00U; - if (pATI->depth >= 8) - pATIHW->b0 = 0x20U; - if (pATI->Chip >= ATI_CHIP_28800_2) - { - if (pATI->VideoRAM > 512) - pATIHW->b0 |= 0x08U; - else if (pATI->VideoRAM > 256) - pATIHW->b0 |= 0x10U; - } - else if (pATI->depth <= 4) - { - if (pATI->VideoRAM > 256) - pATIHW->b0 |= 0x08U; - } - else - { - if (pATI->VideoRAM > 256) - pATIHW->b0 |= 0x18U; - else - pATIHW->b0 |= 0x06U; - } - pATIHW->b1 = ATIGetExtReg(0xB1U) & 0x04U; - /* - * Setting the following bit causes hangs on return to text mode from - * packed modes on 18800-1's. The hang occurs because the adapter's I/O - * response is completely disabled when the register is rewritten. The - * adapter can then only be re-enabled with a powerdown. The bit, when on, - * blanks out the overscan. - */ - if ((pATI->Chip == ATI_CHIP_18800_1) && (pATI->depth >= 8)) - pATIHW->b5 = 0x00U; - else - pATIHW->b5 = 0x01U; - pATIHW->b8 = ATIGetExtReg(0xB8U) & 0xC0U; - pATIHW->b9 = ATIGetExtReg(0xB9U) & 0x7FU; - pATIHW->bd = ATIGetExtReg(0xBDU) & 0x02U; - if (pATI->Chip <= ATI_CHIP_18800) - pATIHW->b2 = ATIGetExtReg(0xB2U) & 0xC0U; - else - { - pATIHW->b2 = 0x00U; - pATIHW->be = (ATIGetExtReg(0xBEU) & 0x30U) | 0x09U; - if (pATI->Chip >= ATI_CHIP_28800_2) - { - pATIHW->a6 = (ATIGetExtReg(0xA6U) & 0x38U) | 0x04U; - pATIHW->a7 = (ATIGetExtReg(0xA7U) & 0xBEU) ; - pATIHW->ac = (ATIGetExtReg(0xACU) & 0x8EU) ; - } - } - if (pMode->Flags & V_INTERLACE) - { /* Enable interlace */ - if (pATI->Chip <= ATI_CHIP_18800) - pATIHW->b2 |= 0x01U; - else - pATIHW->be |= 0x02U; - } -#if 0 /* This is no longer needed but is left in for reference */ - if (pMode->Flags & V_DBLSCAN) /* Enable doublescan */ - pATIHW->b1 |= 0x08U; -#endif - if (pATI->OptionCSync || (pMode->Flags & (V_CSYNC | V_PCSYNC))) - pATIHW->bd |= 0x08U; /* Enable composite sync */ - if (pMode->Flags & V_NCSYNC) - pATIHW->bd |= 0x09U; /* Invert composite sync */ - if (pMode->HSkew > 0) - { - if (pMode->HSkew <= 3) - pATIHW->b5 |= 0x04U; - else if (pATI->Chip >= ATI_CHIP_28800_2) - switch ((pMode->HSkew + 4) >> 3) - { - case 1: /* Use ATI override */ - pATIHW->crt[3] &= ~0x60U; - pATIHW->b0 |= 0x01U; - break; - case 2: /* Use ATI override */ - pATIHW->crt[3] &= ~0x60U; - pATIHW->a6 |= 0x01U; - break; - case 3: - pATIHW->crt[3] |= 0x60U; - break; - case 4: - pATIHW->a7 |= 0x40U; - break; - case 5: - pATIHW->ac |= 0x10U; - break; - case 6: - pATIHW->ac |= 0x20U; - break; - default: - break; - } - } -} - -/* - * ATIVGAWonderSet -- - * - * This function loads the VGA Wonder portion of a video state. - */ -void -ATIVGAWonderSet -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - if (pATI->Chip <= ATI_CHIP_18800) - ATIModifyExtReg(pATI, 0xB2U, -1, 0x00U, pATIHW->b2); - else - { - ATIModifyExtReg(pATI, 0xBEU, -1, 0x00U, pATIHW->be); - if (pATI->Chip >= ATI_CHIP_28800_2) - { - ATIModifyExtReg(pATI, 0xBFU, -1, 0x00U, pATIHW->bf); - ATIModifyExtReg(pATI, 0xA3U, -1, 0x00U, pATIHW->a3); - ATIModifyExtReg(pATI, 0xA6U, -1, 0x00U, pATIHW->a6); - ATIModifyExtReg(pATI, 0xA7U, -1, 0x00U, pATIHW->a7); - ATIModifyExtReg(pATI, 0xABU, -1, 0x00U, pATIHW->ab); - ATIModifyExtReg(pATI, 0xACU, -1, 0x00U, pATIHW->ac); - ATIModifyExtReg(pATI, 0xADU, -1, 0x00U, pATIHW->ad); - ATIModifyExtReg(pATI, 0xAEU, -1, 0x00U, pATIHW->ae); - } - } - ATIModifyExtReg(pATI, 0xB0U, -1, 0x00U, pATIHW->b0); - ATIModifyExtReg(pATI, 0xB1U, -1, 0x00U, pATIHW->b1); - ATIModifyExtReg(pATI, 0xB3U, -1, 0x00U, pATIHW->b3); - ATIModifyExtReg(pATI, 0xB5U, -1, 0x00U, pATIHW->b5); - ATIModifyExtReg(pATI, 0xB6U, -1, 0x00U, pATIHW->b6); - ATIModifyExtReg(pATI, 0xB8U, -1, 0x00U, pATIHW->b8); - ATIModifyExtReg(pATI, 0xB9U, -1, 0x00U, pATIHW->b9); - ATIModifyExtReg(pATI, 0xBAU, -1, 0x00U, pATIHW->ba); - ATIModifyExtReg(pATI, 0xBDU, -1, 0x00U, pATIHW->bd); -} - -#endif /* AVOID_CPIO */ diff --git a/src/atiwonder.h b/src/atiwonder.h deleted file mode 100644 index 34f19cfe..00000000 --- a/src/atiwonder.h +++ /dev/null @@ -1,42 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiwonder.h,v 1.9 2003/01/01 19:16:35 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIWONDER_H___ -#define ___ATIWONDER_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -#ifndef AVOID_CPIO - -extern void ATIVGAWonderPreInit FunctionPrototype((ATIPtr, ATIHWPtr)); -extern void ATIVGAWonderSave FunctionPrototype((ATIPtr, ATIHWPtr)); -extern void ATIVGAWonderCalculate FunctionPrototype((ATIPtr, ATIHWPtr, - DisplayModePtr)); -extern void ATIVGAWonderSet FunctionPrototype((ATIPtr, ATIHWPtr)); - -#endif /* AVOID_CPIO */ - -#endif /* ___ATIWONDER_H___ */ diff --git a/src/atiwonderio.c b/src/atiwonderio.c deleted file mode 100644 index 064e49ed..00000000 --- a/src/atiwonderio.c +++ /dev/null @@ -1,86 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiwonderio.c,v 1.4 2003/01/01 19:16:35 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atichip.h" -#include "atiwonderio.h" - -#ifndef AVOID_CPIO - -/* - * ATIModifyExtReg -- - * - * This function is called to modify certain bits in an ATI extended VGA - * register while preserving its other bits. The function will not write the - * register if it turns out its value would not change. This helps prevent - * server hangs on older adapters. - */ -void -ATIModifyExtReg -( - ATIPtr pATI, - const CARD8 Index, - int CurrentValue, - const CARD8 CurrentMask, - CARD8 NewValue -) -{ - /* Possibly retrieve the current value */ - if (CurrentValue < 0) - CurrentValue = ATIGetExtReg(Index); - - /* Compute new value */ - NewValue &= (CARD8)(~CurrentMask); - NewValue |= CurrentValue & CurrentMask; - - /* Check if value will be changed */ - if (CurrentValue == NewValue) - return; - - /* - * The following is taken from ATI's VGA Wonder programmer's reference - * manual which says that this is needed to "ensure the proper state of the - * 8/16 bit ROM toggle". I suspect a timing glitch appeared in the 18800 - * after its die was cast. 18800-1 and later chips do not exhibit this - * problem. - */ - if ((pATI->Chip <= ATI_CHIP_18800) && (Index == 0xB2U) && - ((NewValue ^ 0x40U) & CurrentValue & 0x40U)) - { - CARD8 misc = inb(R_GENMO); - CARD8 bb = ATIGetExtReg(0xBBU); - - outb(GENMO, (misc & 0xF3U) | 0x04U | ((bb & 0x10U) >> 1)); - CurrentValue &= (CARD8)(~0x40U); - ATIPutExtReg(0xB2U, CurrentValue); - ATIDelay(5); - outb(GENMO, misc); - ATIDelay(5); - if (CurrentValue != NewValue) - ATIPutExtReg(0xB2U, NewValue); - } - else - ATIPutExtReg(Index, NewValue); -} - -#endif /* AVOID_CPIO */ diff --git a/src/atiwonderio.h b/src/atiwonderio.h deleted file mode 100644 index dd0fa585..00000000 --- a/src/atiwonderio.h +++ /dev/null @@ -1,48 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atiwonderio.h,v 1.4 2003/01/01 19:16:35 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIWONDERIO_H___ - -#if !defined(___ATI_H___) && defined(XFree86Module) -# error missing #include "ati.h" before #include "atiwonderio.h" -# undef XFree86Module -#endif - -#define ___ATIWONDERIO_H___ 1 - -#include "atistruct.h" -#include "ativgaio.h" - -#ifndef AVOID_CPIO - -extern void ATIModifyExtReg FunctionPrototype((ATIPtr, const CARD8, int, - const CARD8, CARD8)); - -#define ATIGetExtReg(_Index) \ - GetReg(pATI->CPIO_VGAWonder, _Index) -#define ATIPutExtReg(_Index, _Value) \ - PutReg(pATI->CPIO_VGAWonder, _Index, _Value) - -#endif /* AVOID_CPIO */ - -#endif /* ___ATIWONDERIO_H___ */ diff --git a/src/atixv.c b/src/atixv.c deleted file mode 100644 index 417373a1..00000000 --- a/src/atixv.c +++ /dev/null @@ -1,165 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atixv.c,v 1.5 2003/04/25 04:09:54 tsi Exp $ */ -/* - * Copyright 2001 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "atiadapter.h" -#include "atimach64xv.h" -#include "atistruct.h" -#include "atixv.h" - -/* - * ATIXVFreeAdaptorInfo -- - * - * Free XVideo adaptor information. - */ -static void -ATIXVFreeAdaptorInfo -( - XF86VideoAdaptorPtr *ppAdaptor, - int nAdaptor -) -{ - if (!ppAdaptor) - return; - - while (nAdaptor > 0) - xfree(ppAdaptor[--nAdaptor]); - - xfree(ppAdaptor); -} - -/* - * ATIXVInitializeAdaptor -- - * - * This is called by the server's XVideo support layer to initialise an XVideo - * adapter. - */ -static int -ATIXVInitializeAdaptor -( - ScrnInfoPtr pScreenInfo, - XF86VideoAdaptorPtr **pppAdaptor -) -{ - ScreenPtr pScreen = screenInfo.screens[pScreenInfo->scrnIndex]; - ATIPtr pATI = ATIPTR(pScreenInfo); - XF86VideoAdaptorPtr *ppAdaptor = NULL; - int nAdaptor; - - switch (pATI->Adapter) - { - case ATI_ADAPTER_MACH64: - nAdaptor = ATIMach64XVInitialiseAdaptor(pScreen, pScreenInfo, pATI, - &ppAdaptor); - break; - - default: - nAdaptor = 0; - break; - } - - if (pppAdaptor) - *pppAdaptor = ppAdaptor; - else - ATIXVFreeAdaptorInfo(ppAdaptor, nAdaptor); - - return nAdaptor; -} - -/* - * ATIXVPreInit -- - * - * This function is called by ATIPreInit() to set up the environment required - * to support the XVideo extension. - */ -void -ATIXVPreInit -( - ATIPtr pATI -) -{ - -#ifndef AVOID_CPIO - - /* Currently a linear aperture is needed ... */ - if (!pATI->LinearBase) - return; - -#endif /* AVOID_CPIO */ - - (void)xf86XVRegisterGenericAdaptorDriver(ATIXVInitializeAdaptor); -} - -/* - * ATIInitializeXVideo -- - * - * This function is called to initialise XVideo extension support on a screen. - */ -Bool -ATIInitializeXVideo -( - ScreenPtr pScreen, - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - XF86VideoAdaptorPtr *ppAdaptor; - int nAdaptor; - Bool result; - - if (!(pScreenInfo->memPhysBase = pATI->LinearBase)) - return FALSE; - - pScreenInfo->fbOffset = 0; - - nAdaptor = xf86XVListGenericAdaptors(pScreenInfo, &ppAdaptor); - result = xf86XVScreenInit(pScreen, ppAdaptor, nAdaptor); - - ATIXVFreeAdaptorInfo(ppAdaptor, nAdaptor); - - return result; -} - -/* - * ATICloseXVideo -- - * - * This function is called during screen termination to clean up after XVideo - * initialisation. - */ -void -ATICloseXVideo -( - ScreenPtr pScreen, - ScrnInfoPtr pScreenInfo, - ATIPtr pATI -) -{ - switch (pATI->Adapter) - { - case ATI_ADAPTER_MACH64: - ATIMach64CloseXVideo(pScreen, pScreenInfo, pATI); - break; - - default: - break; - } -} diff --git a/src/atixv.h b/src/atixv.h deleted file mode 100644 index 56f8da82..00000000 --- a/src/atixv.h +++ /dev/null @@ -1,38 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atixv.h,v 1.4 2003/04/23 21:51:31 tsi Exp $ */ -/* - * Copyright 2001 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef ___ATIXV_H___ -#define ___ATIXV_H___ 1 - -#include "atipriv.h" -#include "atiproto.h" - -#include "xf86str.h" - -extern void ATIXVPreInit FunctionPrototype((ATIPtr)); -extern Bool ATIInitializeXVideo FunctionPrototype((ScreenPtr, ScrnInfoPtr, - ATIPtr)); -extern void ATICloseXVideo FunctionPrototype((ScreenPtr, ScrnInfoPtr, - ATIPtr)); - -#endif /* ___ATIXV_H___ */ diff --git a/src/mach64_common.h b/src/mach64_common.h deleted file mode 100644 index 00609e31..00000000 --- a/src/mach64_common.h +++ /dev/null @@ -1,131 +0,0 @@ -/* $XFree86$ */ /* -*- mode: c; c-basic-offset: 3 -*- */ -/* mach64_common.h -- common header definitions for Rage Pro 2D/3D/DRM suite - * Created: Sun Dec 03 11:34:16 2000 by gareth@valinux.com - * - * Copyright 2000 Gareth Hughes - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * GARETH HUGHES BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * Author: - * Gareth Hughes <gareth@valinux.com> - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifndef __MACH64_COMMON_H__ -#define __MACH64_COMMON_H__ 1 - -/* WARNING: If you change any of these defines, make sure to change - * the kernel include file as well (mach64_drm.h) - */ - -/* Driver specific DRM command indices - * NOTE: these are not OS specific, but they are driver specific - */ -#define DRM_MACH64_INIT 0x00 -#define DRM_MACH64_IDLE 0x01 -#define DRM_MACH64_RESET 0x02 -#define DRM_MACH64_SWAP 0x03 -#define DRM_MACH64_CLEAR 0x04 -#define DRM_MACH64_VERTEX 0x05 -#define DRM_MACH64_BLIT 0x06 -#define DRM_MACH64_FLUSH 0x07 -#define DRM_MACH64_GETPARAM 0x08 - -/* Buffer flags for clears - */ -#define MACH64_FRONT 0x1 -#define MACH64_BACK 0x2 -#define MACH64_DEPTH 0x4 - -/* Primitive types for vertex buffers - */ -#define MACH64_PRIM_POINTS 0x00000000 -#define MACH64_PRIM_LINES 0x00000001 -#define MACH64_PRIM_LINE_LOOP 0x00000002 -#define MACH64_PRIM_LINE_STRIP 0x00000003 -#define MACH64_PRIM_TRIANGLES 0x00000004 -#define MACH64_PRIM_TRIANGLE_STRIP 0x00000005 -#define MACH64_PRIM_TRIANGLE_FAN 0x00000006 -#define MACH64_PRIM_QUADS 0x00000007 -#define MACH64_PRIM_QUAD_STRIP 0x00000008 -#define MACH64_PRIM_POLYGON 0x00000009 - - -typedef enum _drmMach64DMAMode { - MACH64_MODE_DMA_ASYNC, - MACH64_MODE_DMA_SYNC, - MACH64_MODE_MMIO -} drmMach64DMAMode; - -typedef struct { - enum { - DRM_MACH64_INIT_DMA = 0x01, - DRM_MACH64_CLEANUP_DMA = 0x02 - } func; - unsigned long sarea_priv_offset; - int is_pci; - drmMach64DMAMode dma_mode; - - unsigned int fb_bpp; - unsigned int front_offset, front_pitch; - unsigned int back_offset, back_pitch; - - unsigned int depth_bpp; - unsigned int depth_offset, depth_pitch; - - unsigned long fb_offset; - unsigned long mmio_offset; - unsigned long ring_offset; - unsigned long buffers_offset; - unsigned long agp_textures_offset; -} drmMach64Init; - -typedef struct { - unsigned int flags; - int x, y, w, h; - unsigned int clear_color; - unsigned int clear_depth; -} drmMach64Clear; - -typedef struct { - int prim; - void *buf; /* Address of vertex buffer */ - unsigned long used; /* Number of bytes in buffer */ - int discard; /* Client finished with buffer? */ -} drmMach64Vertex; - -typedef struct { - int idx; - int pitch; - int offset; - int format; - unsigned short x, y; - unsigned short width, height; -} drmMach64Blit; - -typedef struct { - int param; - int *value; -} drmMach64GetParam; - -#define MACH64_PARAM_FRAMES_QUEUED 1 -#define MACH64_PARAM_IRQ_NR 2 - -#endif /* __MACH64_COMMON_H__ */ diff --git a/src/mach64_dri.h b/src/mach64_dri.h deleted file mode 100644 index 139668e3..00000000 --- a/src/mach64_dri.h +++ /dev/null @@ -1,126 +0,0 @@ -/* $XFree86$ */ /* -*- mode: c; c-basic-offset: 3 -*- */ -/* - * Copyright 2000 Gareth Hughes - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * GARETH HUGHES BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Gareth Hughes <gareth@valinux.com> - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifndef __MACH64_DRI_H__ -#define __MACH64_DRI_H__ 1 - -#include "xf86drm.h" - -typedef struct { - drm_handle_t fbHandle; - - drm_handle_t regsHandle; - drmSize regsSize; - - int IsPCI; - - drm_handle_t agpHandle; /* Handle from drmAgpAlloc */ - unsigned long agpOffset; - drmSize agpSize; - int agpMode; - - /* DMA descriptor ring */ - unsigned long ringStart; /* Offset into AGP space */ - drm_handle_t ringHandle; /* Handle from drmAddMap */ - drmSize ringMapSize; /* Size of map */ - int ringSize; /* Size of ring (in kB) */ - drmAddress ringMap; /* Map */ - - /* vertex buffer data */ - unsigned long bufferStart; /* Offset into AGP space */ - drm_handle_t bufferHandle; /* Handle from drmAddMap */ - drmSize bufferMapSize; /* Size of map */ - int bufferSize; /* Size of buffers (in MB) */ - drmAddress bufferMap; /* Map */ - - drmBufMapPtr drmBuffers; /* Buffer map */ - int numBuffers; /* Number of buffers */ - - /* AGP Texture data */ - unsigned long agpTexStart; /* Offset into AGP space */ - drm_handle_t agpTexHandle; /* Handle from drmAddMap */ - drmSize agpTexMapSize; /* Size of map */ - int agpTexSize; /* Size of AGP tex space (in MB) */ - drmAddress agpTexMap; /* Map */ - int log2AGPTexGran; - - int fbX; - int fbY; - int backX; - int backY; - int depthX; - int depthY; - - int frontOffset; - int frontPitch; - int backOffset; - int backPitch; - int depthOffset; - int depthPitch; - - int textureOffset; - int textureSize; - int logTextureGranularity; -} ATIDRIServerInfoRec, *ATIDRIServerInfoPtr; - -typedef struct { - int chipset; - int width; - int height; - int mem; - int cpp; - - int IsPCI; - int AGPMode; - - unsigned int frontOffset; - unsigned int frontPitch; - - unsigned int backOffset; - unsigned int backPitch; - - unsigned int depthOffset; - unsigned int depthPitch; - - unsigned int textureOffset; - unsigned int textureSize; - int logTextureGranularity; - - drm_handle_t regs; - drmSize regsSize; - - drm_handle_t agp; - drmSize agpSize; - unsigned int agpTextureOffset; - unsigned int agpTextureSize; - int logAgpTextureGranularity; -} ATIDRIRec, *ATIDRIPtr; - -#endif /* __MACH64_DRI_H__ */ diff --git a/src/mach64_sarea.h b/src/mach64_sarea.h deleted file mode 100644 index 47a4bf9a..00000000 --- a/src/mach64_sarea.h +++ /dev/null @@ -1,163 +0,0 @@ -/* $XFree86$ */ /* -*- mode: c; c-basic-offset: 3 -*- */ -/* - * Copyright 2000 Gareth Hughes - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * GARETH HUGHES BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Gareth Hughes <gareth@valinux.com> - * Leif Delgass <ldelgass@retinalburn.net> - */ - -#ifndef __MACH64_SAREA_H__ -#define __MACH64_SAREA_H__ 1 - -#include "Xmd.h" - -/* WARNING: If you change any of these defines, make sure to change the - * defines in the kernel file (mach64_drm.h) - */ -#ifndef __MACH64_SAREA_DEFINES__ -#define __MACH64_SAREA_DEFINES__ 1 - -/* What needs to be changed for the current vertex buffer? - * GH: We're going to be pedantic about this. We want the card to do as - * little as possible, so let's avoid having it fetch a whole bunch of - * register values that don't change all that often, if at all. - */ -#define MACH64_UPLOAD_DST_OFF_PITCH 0x0001 -#define MACH64_UPLOAD_Z_OFF_PITCH 0x0002 -#define MACH64_UPLOAD_Z_ALPHA_CNTL 0x0004 -#define MACH64_UPLOAD_SCALE_3D_CNTL 0x0008 -#define MACH64_UPLOAD_DP_FOG_CLR 0x0010 -#define MACH64_UPLOAD_DP_WRITE_MASK 0x0020 -#define MACH64_UPLOAD_DP_PIX_WIDTH 0x0040 -#define MACH64_UPLOAD_SETUP_CNTL 0x0080 -#define MACH64_UPLOAD_MISC 0x0100 -#define MACH64_UPLOAD_TEXTURE 0x0200 -#define MACH64_UPLOAD_TEX0IMAGE 0x0400 -#define MACH64_UPLOAD_TEX1IMAGE 0x0800 -#define MACH64_UPLOAD_CLIPRECTS 0x1000 /* handled client-side */ -#define MACH64_UPLOAD_CONTEXT 0x00ff -#define MACH64_UPLOAD_ALL 0x1fff - -/* DMA buffer size - */ -#define MACH64_BUFFER_SIZE 16384 - -/* Max number of swaps allowed on the ring - * before the client must wait - */ -#define MACH64_MAX_QUEUED_FRAMES 3 - -/* Byte offsets for host blit buffer data - */ -#define MACH64_HOSTDATA_BLIT_OFFSET 104 - -/* Keep these small for testing. - */ -#define MACH64_NR_SAREA_CLIPRECTS 8 - - -#define MACH64_CARD_HEAP 0 -#define MACH64_AGP_HEAP 1 -#define MACH64_NR_TEX_HEAPS 2 -#define MACH64_NR_TEX_REGIONS 64 -#define MACH64_LOG_TEX_GRANULARITY 16 - -#define MACH64_TEX_MAXLEVELS 1 - -#define MACH64_NR_CONTEXT_REGS 15 -#define MACH64_NR_TEXTURE_REGS 4 - -#endif /* __MACH64_SAREA_DEFINES__ */ - -typedef struct { - /* Context state */ - unsigned int dst_off_pitch; /* 0x500 */ - - unsigned int z_off_pitch; /* 0x548 */ /* ****** */ - unsigned int z_cntl; /* 0x54c */ - unsigned int alpha_tst_cntl; /* 0x550 */ - - unsigned int scale_3d_cntl; /* 0x5fc */ - - unsigned int sc_left_right; /* 0x6a8 */ - unsigned int sc_top_bottom; /* 0x6b4 */ - - unsigned int dp_fog_clr; /* 0x6c4 */ - unsigned int dp_write_mask; /* 0x6c8 */ - unsigned int dp_pix_width; /* 0x6d0 */ - unsigned int dp_mix; /* 0x6d4 */ /* ****** */ - unsigned int dp_src; /* 0x6d8 */ /* ****** */ - - unsigned int clr_cmp_cntl; /* 0x708 */ /* ****** */ - unsigned int gui_traj_cntl; /* 0x730 */ /* ****** */ - - unsigned int setup_cntl; /* 0x304 */ - - /* Texture state */ - unsigned int tex_size_pitch; /* 0x770 */ - unsigned int tex_cntl; /* 0x774 */ - unsigned int secondary_tex_off; /* 0x778 */ - unsigned int tex_offset; /* 0x5c0 */ -} mach64_context_regs_t; - -typedef struct { - /* The channel for communication of state information to the kernel - * on firing a vertex buffer. - */ - mach64_context_regs_t ContextState; - unsigned int dirty; - unsigned int vertsize; - -#ifdef XF86DRI - /* The current cliprects, or a subset thereof. - */ - drm_clip_rect_t boxes[MACH64_NR_SAREA_CLIPRECTS]; - unsigned int nbox; -#endif - /* Counter for throttling of rendering clients. - */ - unsigned int frames_queued; - - /* Maintain an LRU of contiguous regions of texture space. If you - * think you own a region of texture memory, and it has an age - * different to the one you set, then you are mistaken and it has - * been stolen by another client. If global texAge hasn't changed, - * there is no need to walk the list. - * - * These regions can be used as a proxy for the fine-grained texture - * information of other clients - by maintaining them in the same - * lru which is used to age their own textures, clients have an - * approximate lru for the whole of global texture space, and can - * make informed decisions as to which areas to kick out. There is - * no need to choose whether to kick out your own texture or someone - * else's - simply eject them all in LRU order. - */ - drmTextureRegion texList[MACH64_NR_TEX_HEAPS][MACH64_NR_TEX_REGIONS+1]; - unsigned int texAge[MACH64_NR_TEX_HEAPS]; - - int ctxOwner; /* last context to upload state */ -} ATISAREAPrivRec, *ATISAREAPrivPtr; - -#endif /* __MACH64_SAREA_H__ */ diff --git a/src/r128.h b/src/r128.h deleted file mode 100644 index eac70f86..00000000 --- a/src/r128.h +++ /dev/null @@ -1,558 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128.h,v 1.24 2002/12/16 16:19:10 dawes Exp $ */ -/* - * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, - * Precision Insight, Inc., Cedar Park, Texas, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX - * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Rickard E. Faith <faith@valinux.com> - * Kevin E. Martin <martin@valinux.com> - * - */ - -#ifndef _R128_H_ -#define _R128_H_ - -#include "xf86str.h" - - /* PCI support */ -#include "xf86Pci.h" - - /* XAA and Cursor Support */ -#include "xaa.h" -#include "xf86Cursor.h" - - /* DDC support */ -#include "xf86DDC.h" - - /* Xv support */ -#include "xf86xv.h" - - /* DRI support */ -#ifdef XF86DRI -#define _XF86DRI_SERVER_ -#include "r128_dripriv.h" -#include "dri.h" -#include "GL/glxint.h" -#endif - -#define R128_DEBUG 0 /* Turn off debugging output */ -#define R128_IDLE_RETRY 32 /* Fall out of idle loops after this count */ -#define R128_TIMEOUT 2000000 /* Fall out of wait loops after this count */ -#define R128_MMIOSIZE 0x4000 - -#define R128_VBIOS_SIZE 0x00010000 - -#if R128_DEBUG -#define R128TRACE(x) \ - do { \ - ErrorF("(**) %s(%d): ", R128_NAME, pScrn->scrnIndex); \ - ErrorF x; \ - } while (0); -#else -#define R128TRACE(x) -#endif - - -/* Other macros */ -#define R128_ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0])) -#define R128_ALIGN(x,bytes) (((x) + ((bytes) - 1)) & ~((bytes) - 1)) -#define R128PTR(pScrn) ((R128InfoPtr)(pScrn)->driverPrivate) - -typedef struct { /* All values in XCLKS */ - int ML; /* Memory Read Latency */ - int MB; /* Memory Burst Length */ - int Trcd; /* RAS to CAS delay */ - int Trp; /* RAS percentage */ - int Twr; /* Write Recovery */ - int CL; /* CAS Latency */ - int Tr2w; /* Read to Write Delay */ - int Rloop; /* Loop Latency */ - int Rloop_fudge; /* Add to ML to get Rloop */ - char *name; -} R128RAMRec, *R128RAMPtr; - -typedef struct { - /* Common registers */ - CARD32 ovr_clr; - CARD32 ovr_wid_left_right; - CARD32 ovr_wid_top_bottom; - CARD32 ov0_scale_cntl; - CARD32 mpp_tb_config; - CARD32 mpp_gp_config; - CARD32 subpic_cntl; - CARD32 viph_control; - CARD32 i2c_cntl_1; - CARD32 gen_int_cntl; - CARD32 cap0_trig_cntl; - CARD32 cap1_trig_cntl; - CARD32 bus_cntl; - CARD32 config_cntl; - - /* Other registers to save for VT switches */ - CARD32 dp_datatype; - CARD32 gen_reset_cntl; - CARD32 clock_cntl_index; - CARD32 amcgpio_en_reg; - CARD32 amcgpio_mask; - - /* CRTC registers */ - CARD32 crtc_gen_cntl; - CARD32 crtc_ext_cntl; - CARD32 dac_cntl; - CARD32 crtc_h_total_disp; - CARD32 crtc_h_sync_strt_wid; - CARD32 crtc_v_total_disp; - CARD32 crtc_v_sync_strt_wid; - CARD32 crtc_offset; - CARD32 crtc_offset_cntl; - CARD32 crtc_pitch; - - /* CRTC2 registers */ - CARD32 crtc2_gen_cntl; - - /* Flat panel registers */ - CARD32 fp_crtc_h_total_disp; - CARD32 fp_crtc_v_total_disp; - CARD32 fp_gen_cntl; - CARD32 fp_h_sync_strt_wid; - CARD32 fp_horz_stretch; - CARD32 fp_panel_cntl; - CARD32 fp_v_sync_strt_wid; - CARD32 fp_vert_stretch; - CARD32 lvds_gen_cntl; - CARD32 tmds_crc; - CARD32 tmds_transmitter_cntl; - - /* Computed values for PLL */ - CARD32 dot_clock_freq; - CARD32 pll_output_freq; - int feedback_div; - int post_div; - - /* PLL registers */ - CARD32 ppll_ref_div; - CARD32 ppll_div_3; - CARD32 htotal_cntl; - - /* DDA register */ - CARD32 dda_config; - CARD32 dda_on_off; - - /* Pallet */ - Bool palette_valid; - CARD32 palette[256]; -} R128SaveRec, *R128SavePtr; - -typedef struct { - CARD16 reference_freq; - CARD16 reference_div; - CARD32 min_pll_freq; - CARD32 max_pll_freq; - CARD16 xclk; -} R128PLLRec, *R128PLLPtr; - -typedef struct { - int bitsPerPixel; - int depth; - int displayWidth; - int pixel_code; - int pixel_bytes; - DisplayModePtr mode; -} R128FBLayout; - -typedef struct { - EntityInfoPtr pEnt; - pciVideoPtr PciInfo; - PCITAG PciTag; - int Chipset; - Bool Primary; - - Bool FBDev; - - unsigned long LinearAddr; /* Frame buffer physical address */ - unsigned long MMIOAddr; /* MMIO region physical address */ - unsigned long BIOSAddr; /* BIOS physical address */ - - unsigned char *MMIO; /* Map of MMIO region */ - unsigned char *FB; /* Map of frame buffer */ - - CARD32 MemCntl; - CARD32 BusCntl; - unsigned long FbMapSize; /* Size of frame buffer, in bytes */ - int Flags; /* Saved copy of mode flags */ - - CARD8 BIOSDisplay; /* Device the BIOS is set to display to */ - - Bool HasPanelRegs; /* Current chip can connect to a FP */ - CARD8 *VBIOS; /* Video BIOS for mode validation on FPs */ - int FPBIOSstart; /* Start of the flat panel info */ - - /* Computed values for FPs */ - int PanelXRes; - int PanelYRes; - int HOverPlus; - int HSyncWidth; - int HBlank; - int VOverPlus; - int VSyncWidth; - int VBlank; - int PanelPwrDly; - - R128PLLRec pll; - R128RAMPtr ram; - - R128SaveRec SavedReg; /* Original (text) mode */ - R128SaveRec ModeReg; /* Current mode */ - Bool (*CloseScreen)(int, ScreenPtr); - void (*BlockHandler)(int, pointer, pointer, pointer); - - Bool PaletteSavedOnVT; /* Palette saved on last VT switch */ - - XAAInfoRecPtr accel; - Bool accelOn; - xf86CursorInfoPtr cursor; - unsigned long cursor_start; - unsigned long cursor_end; - - /* - * XAAForceTransBlit is used to change the behavior of the XAA - * SetupForScreenToScreenCopy function, to make it DGA-friendly. - */ - Bool XAAForceTransBlit; - - int fifo_slots; /* Free slots in the FIFO (64 max) */ - int pix24bpp; /* Depth of pixmap for 24bpp framebuffer */ - Bool dac6bits; /* Use 6 bit DAC? */ - - /* Computed values for Rage 128 */ - int pitch; - int datatype; - CARD32 dp_gui_master_cntl; - - /* Saved values for ScreenToScreenCopy */ - int xdir; - int ydir; - - /* ScanlineScreenToScreenColorExpand support */ - unsigned char *scratch_buffer[1]; - unsigned char *scratch_save; - int scanline_x; - int scanline_y; - int scanline_w; - int scanline_h; -#ifdef XF86DRI - int scanline_hpass; - int scanline_x1clip; - int scanline_x2clip; - int scanline_rop; - int scanline_fg; - int scanline_bg; -#endif /* XF86DRI */ - int scanline_words; - int scanline_direct; - int scanline_bpp; /* Only used for ImageWrite */ - - DGAModePtr DGAModes; - int numDGAModes; - Bool DGAactive; - int DGAViewportStatus; - DGAFunctionRec DGAFuncs; - - R128FBLayout CurrentLayout; -#ifdef XF86DRI - Bool directRenderingEnabled; - DRIInfoPtr pDRIInfo; - int drmFD; - drm_context_t drmCtx; - int numVisualConfigs; - __GLXvisualConfig *pVisualConfigs; - R128ConfigPrivPtr pVisualConfigsPriv; - - drm_handle_t fbHandle; - - drmSize registerSize; - drm_handle_t registerHandle; - - Bool IsPCI; /* Current card is a PCI card */ - drmSize pciSize; - drm_handle_t pciMemHandle; - unsigned char *PCI; /* Map */ - - Bool allowPageFlip; /* Enable 3d page flipping */ - Bool have3DWindows; /* Are there any 3d clients? */ - int drmMinor; - - drmSize agpSize; - drm_handle_t agpMemHandle; /* Handle from drmAgpAlloc */ - unsigned long agpOffset; - unsigned char *AGP; /* Map */ - int agpMode; - - Bool CCEInUse; /* CCE is currently active */ - int CCEMode; /* CCE mode that server/clients use */ - int CCEFifoSize; /* Size of the CCE command FIFO */ - Bool CCESecure; /* CCE security enabled */ - int CCEusecTimeout; /* CCE timeout in usecs */ - - /* CCE ring buffer data */ - unsigned long ringStart; /* Offset into AGP space */ - drm_handle_t ringHandle; /* Handle from drmAddMap */ - drmSize ringMapSize; /* Size of map */ - int ringSize; /* Size of ring (in MB) */ - unsigned char *ring; /* Map */ - int ringSizeLog2QW; - - unsigned long ringReadOffset; /* Offset into AGP space */ - drm_handle_t ringReadPtrHandle; /* Handle from drmAddMap */ - drmSize ringReadMapSize; /* Size of map */ - unsigned char *ringReadPtr; /* Map */ - - /* CCE vertex/indirect buffer data */ - unsigned long bufStart; /* Offset into AGP space */ - drm_handle_t bufHandle; /* Handle from drmAddMap */ - drmSize bufMapSize; /* Size of map */ - int bufSize; /* Size of buffers (in MB) */ - unsigned char *buf; /* Map */ - int bufNumBufs; /* Number of buffers */ - drmBufMapPtr buffers; /* Buffer map */ - - /* CCE AGP Texture data */ - unsigned long agpTexStart; /* Offset into AGP space */ - drm_handle_t agpTexHandle; /* Handle from drmAddMap */ - drmSize agpTexMapSize; /* Size of map */ - int agpTexSize; /* Size of AGP tex space (in MB) */ - unsigned char *agpTex; /* Map */ - int log2AGPTexGran; - - /* CCE 2D accleration */ - drmBufPtr indirectBuffer; - int indirectStart; - - /* DRI screen private data */ - int fbX; - int fbY; - int backX; - int backY; - int depthX; - int depthY; - - int frontOffset; - int frontPitch; - int backOffset; - int backPitch; - int depthOffset; - int depthPitch; - int spanOffset; - int textureOffset; - int textureSize; - int log2TexGran; - - /* Saved scissor values */ - CARD32 sc_left; - CARD32 sc_right; - CARD32 sc_top; - CARD32 sc_bottom; - - CARD32 re_top_left; - CARD32 re_width_height; - - CARD32 aux_sc_cntl; - - int irq; - CARD32 gen_int_cntl; - - Bool DMAForXv; -#endif - - XF86VideoAdaptorPtr adaptor; - void (*VideoTimerCallback)(ScrnInfoPtr, Time); - int videoKey; - Bool showCache; - OptionInfoPtr Options; - - Bool isDFP; - Bool isPro2; - I2CBusPtr pI2CBus; - CARD32 DDCReg; - -} R128InfoRec, *R128InfoPtr; - -#define R128WaitForFifo(pScrn, entries) \ -do { \ - if (info->fifo_slots < entries) R128WaitForFifoFunction(pScrn, entries); \ - info->fifo_slots -= entries; \ -} while (0) - -extern void R128WaitForFifoFunction(ScrnInfoPtr pScrn, int entries); -extern void R128WaitForIdle(ScrnInfoPtr pScrn); -extern void R128EngineReset(ScrnInfoPtr pScrn); -extern void R128EngineFlush(ScrnInfoPtr pScrn); - -extern unsigned R128INPLL(ScrnInfoPtr pScrn, int addr); -extern void R128WaitForVerticalSync(ScrnInfoPtr pScrn); - -extern Bool R128AccelInit(ScreenPtr pScreen); -extern void R128EngineInit(ScrnInfoPtr pScrn); -extern Bool R128CursorInit(ScreenPtr pScreen); -extern Bool R128DGAInit(ScreenPtr pScreen); - -extern int R128MinBits(int val); - -extern void R128InitVideo(ScreenPtr pScreen); - -#ifdef XF86DRI -extern Bool R128DRIScreenInit(ScreenPtr pScreen); -extern void R128DRICloseScreen(ScreenPtr pScreen); -extern Bool R128DRIFinishScreenInit(ScreenPtr pScreen); - -#define R128CCE_START(pScrn, info) \ -do { \ - int _ret = drmCommandNone(info->drmFD, DRM_R128_CCE_START); \ - if (_ret) { \ - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, \ - "%s: CCE start %d\n", __FUNCTION__, _ret); \ - } \ -} while (0) - -#define R128CCE_STOP(pScrn, info) \ -do { \ - int _ret = R128CCEStop(pScrn); \ - if (_ret) { \ - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, \ - "%s: CCE stop %d\n", __FUNCTION__, _ret); \ - } \ -} while (0) - -#define R128CCE_RESET(pScrn, info) \ -do { \ - if (info->directRenderingEnabled \ - && R128CCE_USE_RING_BUFFER(info->CCEMode)) { \ - int _ret = drmCommandNone(info->drmFD, DRM_R128_CCE_RESET); \ - if (_ret) { \ - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, \ - "%s: CCE reset %d\n", __FUNCTION__, _ret); \ - } \ - } \ -} while (0) - -extern drmBufPtr R128CCEGetBuffer(ScrnInfoPtr pScrn); -#endif - -extern void R128CCEFlushIndirect(ScrnInfoPtr pScrn, int discard); -extern void R128CCEReleaseIndirect(ScrnInfoPtr pScrn); -extern void R128CCEWaitForIdle(ScrnInfoPtr pScrn); -extern int R128CCEStop(ScrnInfoPtr pScrn); - - -#define CCE_PACKET0( reg, n ) \ - (R128_CCE_PACKET0 | ((n) << 16) | ((reg) >> 2)) -#define CCE_PACKET1( reg0, reg1 ) \ - (R128_CCE_PACKET1 | (((reg1) >> 2) << 11) | ((reg0) >> 2)) -#define CCE_PACKET2() \ - (R128_CCE_PACKET2) -#define CCE_PACKET3( pkt, n ) \ - (R128_CCE_PACKET3 | (pkt) | ((n) << 16)) - - -#define R128_VERBOSE 0 - -#define RING_LOCALS CARD32 *__head; int __count; - -#define R128CCE_REFRESH(pScrn, info) \ -do { \ - if ( R128_VERBOSE ) { \ - xf86DrvMsg( pScrn->scrnIndex, X_INFO, "REFRESH( %d ) in %s\n", \ - !info->CCEInUse , __FUNCTION__ ); \ - } \ - if ( !info->CCEInUse ) { \ - R128CCEWaitForIdle(pScrn); \ - BEGIN_RING( 6 ); \ - OUT_RING_REG( R128_RE_TOP_LEFT, info->re_top_left ); \ - OUT_RING_REG( R128_RE_WIDTH_HEIGHT, info->re_width_height ); \ - OUT_RING_REG( R128_AUX_SC_CNTL, info->aux_sc_cntl ); \ - ADVANCE_RING(); \ - info->CCEInUse = TRUE; \ - } \ -} while (0) - -#define BEGIN_RING( n ) do { \ - if ( R128_VERBOSE ) { \ - xf86DrvMsg( pScrn->scrnIndex, X_INFO, \ - "BEGIN_RING( %d ) in %s\n", n, __FUNCTION__ ); \ - } \ - if ( !info->indirectBuffer ) { \ - info->indirectBuffer = R128CCEGetBuffer( pScrn ); \ - info->indirectStart = 0; \ - } else if ( (info->indirectBuffer->used + 4*(n)) > \ - info->indirectBuffer->total ) { \ - R128CCEFlushIndirect( pScrn, 1 ); \ - } \ - __head = (pointer)((char *)info->indirectBuffer->address + \ - info->indirectBuffer->used); \ - __count = 0; \ -} while (0) - -#define ADVANCE_RING() do { \ - if ( R128_VERBOSE ) { \ - xf86DrvMsg( pScrn->scrnIndex, X_INFO, \ - "ADVANCE_RING() used: %d+%d=%d/%d\n", \ - info->indirectBuffer->used - info->indirectStart, \ - __count * sizeof(CARD32), \ - info->indirectBuffer->used - info->indirectStart + \ - __count * sizeof(CARD32), \ - info->indirectBuffer->total - info->indirectStart ); \ - } \ - info->indirectBuffer->used += __count * (int)sizeof(CARD32); \ -} while (0) - -#define OUT_RING( x ) do { \ - if ( R128_VERBOSE ) { \ - xf86DrvMsg( pScrn->scrnIndex, X_INFO, \ - " OUT_RING( 0x%08x )\n", (unsigned int)(x) ); \ - } \ - MMIO_OUT32(&__head[__count++], 0, (x)); \ -} while (0) - -#define OUT_RING_REG( reg, val ) \ -do { \ - OUT_RING( CCE_PACKET0( reg, 0 ) ); \ - OUT_RING( val ); \ -} while (0) - -#define FLUSH_RING() \ -do { \ - if ( R128_VERBOSE ) \ - xf86DrvMsg( pScrn->scrnIndex, X_INFO, \ - "FLUSH_RING in %s\n", __FUNCTION__ ); \ - if ( info->indirectBuffer ) { \ - R128CCEFlushIndirect( pScrn, 0 ); \ - } \ -} while (0) - -#endif diff --git a/src/r128_accel.c b/src/r128_accel.c deleted file mode 100644 index 98877962..00000000 --- a/src/r128_accel.c +++ /dev/null @@ -1,1807 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_accel.c,v 1.16 2002/11/15 03:01:35 dawes Exp $ */ -/* - * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, - * Precision Insight, Inc., Cedar Park, Texas, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX - * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Rickard E. Faith <faith@valinux.com> - * Kevin E. Martin <martin@valinux.com> - * Alan Hourihane <alanh@fairlite.demon.co.uk> - * - * Credits: - * - * Thanks to Alan Hourihane <alanh@fairlite.demon..co.uk> and SuSE for - * providing source code to their 3.3.x Rage 128 driver. Portions of - * this file are based on the acceleration code for that driver. - * - * References: - * - * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical - * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April - * 1999. - * - * RAGE 128 Software Development Manual (Technical Reference Manual P/N - * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. - * - * Notes on unimplemented XAA optimizations: - * - * SetClipping: The Rage128 doesn't support the full 16bit registers needed - * for XAA clip rect support. - * SolidFillTrap: This will probably work if we can compute the correct - * Bresenham error values. - * TwoPointLine: The Rage 128 supports Bresenham lines instead. - * DashedLine with non-power-of-two pattern length: Apparently, there is - * no way to set the length of the pattern -- it is always - * assumed to be 8 or 32 (or 1024?). - * ScreenToScreenColorExpandFill: See p. 4-17 of the Technical Reference - * Manual where it states that monochrome expansion of frame - * buffer data is not supported. - * CPUToScreenColorExpandFill, direct: The implementation here uses a hybrid - * direct/indirect method. If we had more data registers, - * then we could do better. If XAA supported a trigger write - * address, the code would be simpler. - * (Alan Hourihane) Update. We now use purely indirect and clip the full - * rectangle. Seems as the direct method has some problems - * with this, although this indirect method is much faster - * than the old method of setting up the engine per scanline. - * This code was the basis of the Radeon work we did. - * Color8x8PatternFill: Apparently, an 8x8 color brush cannot take an 8x8 - * pattern from frame buffer memory. - * ImageWrites: See CPUToScreenColorExpandFill. - * - */ - -#define R128_TRAPEZOIDS 0 /* Trapezoids don't work */ - - /* Driver data structures */ -#include "r128.h" -#include "r128_reg.h" -#include "r128_sarea.h" -#ifdef XF86DRI -#include "r128_sarea.h" -#define _XF86DRI_SERVER_ -#include "r128_dri.h" -#include "r128_common.h" -#endif - - /* Line support */ -#include "miline.h" - - /* X and server generic header files */ -#include "xf86.h" - -static struct { - int rop; - int pattern; -} R128_ROP[] = { - { R128_ROP3_ZERO, R128_ROP3_ZERO }, /* GXclear */ - { R128_ROP3_DSa, R128_ROP3_DPa }, /* Gxand */ - { R128_ROP3_SDna, R128_ROP3_PDna }, /* GXandReverse */ - { R128_ROP3_S, R128_ROP3_P }, /* GXcopy */ - { R128_ROP3_DSna, R128_ROP3_DPna }, /* GXandInverted */ - { R128_ROP3_D, R128_ROP3_D }, /* GXnoop */ - { R128_ROP3_DSx, R128_ROP3_DPx }, /* GXxor */ - { R128_ROP3_DSo, R128_ROP3_DPo }, /* GXor */ - { R128_ROP3_DSon, R128_ROP3_DPon }, /* GXnor */ - { R128_ROP3_DSxn, R128_ROP3_PDxn }, /* GXequiv */ - { R128_ROP3_Dn, R128_ROP3_Dn }, /* GXinvert */ - { R128_ROP3_SDno, R128_ROP3_PDno }, /* GXorReverse */ - { R128_ROP3_Sn, R128_ROP3_Pn }, /* GXcopyInverted */ - { R128_ROP3_DSno, R128_ROP3_DPno }, /* GXorInverted */ - { R128_ROP3_DSan, R128_ROP3_DPan }, /* GXnand */ - { R128_ROP3_ONE, R128_ROP3_ONE } /* GXset */ -}; - -/* Flush all dirty data in the Pixel Cache to memory. */ -void R128EngineFlush(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int i; - - OUTREGP(R128_PC_NGUI_CTLSTAT, R128_PC_FLUSH_ALL, ~R128_PC_FLUSH_ALL); - for (i = 0; i < R128_TIMEOUT; i++) { - if (!(INREG(R128_PC_NGUI_CTLSTAT) & R128_PC_BUSY)) break; - } -} - -/* Reset graphics card to known state. */ -void R128EngineReset(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - CARD32 clock_cntl_index; - CARD32 mclk_cntl; - CARD32 gen_reset_cntl; - - R128EngineFlush(pScrn); - - clock_cntl_index = INREG(R128_CLOCK_CNTL_INDEX); - mclk_cntl = INPLL(pScrn, R128_MCLK_CNTL); - - OUTPLL(R128_MCLK_CNTL, mclk_cntl | R128_FORCE_GCP | R128_FORCE_PIPE3D_CP); - - gen_reset_cntl = INREG(R128_GEN_RESET_CNTL); - - OUTREG(R128_GEN_RESET_CNTL, gen_reset_cntl | R128_SOFT_RESET_GUI); - INREG(R128_GEN_RESET_CNTL); - OUTREG(R128_GEN_RESET_CNTL, - gen_reset_cntl & (CARD32)(~R128_SOFT_RESET_GUI)); - INREG(R128_GEN_RESET_CNTL); - - OUTPLL(R128_MCLK_CNTL, mclk_cntl); - OUTREG(R128_CLOCK_CNTL_INDEX, clock_cntl_index); - OUTREG(R128_GEN_RESET_CNTL, gen_reset_cntl); -} - -/* The FIFO has 64 slots. This routines waits until at least `entries' of - these slots are empty. */ -void R128WaitForFifoFunction(ScrnInfoPtr pScrn, int entries) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int i; - - for (;;) { - for (i = 0; i < R128_TIMEOUT; i++) { - info->fifo_slots = INREG(R128_GUI_STAT) & R128_GUI_FIFOCNT_MASK; - if (info->fifo_slots >= entries) return; - } - R128TRACE(("FIFO timed out: %d entries, stat=0x%08x, probe=0x%08x\n", - INREG(R128_GUI_STAT) & R128_GUI_FIFOCNT_MASK, - INREG(R128_GUI_STAT), - INREG(R128_GUI_PROBE))); - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "FIFO timed out, resetting engine...\n"); - R128EngineReset(pScrn); -#ifdef XF86DRI - R128CCE_RESET(pScrn, info); - if (info->directRenderingEnabled) { - R128CCE_START(pScrn, info); - } -#endif - } -} - -/* Wait for the graphics engine to be completely idle: the FIFO has - drained, the Pixel Cache is flushed, and the engine is idle. This is a - standard "sync" function that will make the hardware "quiescent". */ -void R128WaitForIdle(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int i; - - R128WaitForFifoFunction(pScrn, 64); - - for (;;) { - for (i = 0; i < R128_TIMEOUT; i++) { - if (!(INREG(R128_GUI_STAT) & R128_GUI_ACTIVE)) { - R128EngineFlush(pScrn); - return; - } - } - R128TRACE(("Idle timed out: %d entries, stat=0x%08x, probe=0x%08x\n", - INREG(R128_GUI_STAT) & R128_GUI_FIFOCNT_MASK, - INREG(R128_GUI_STAT), - INREG(R128_GUI_PROBE))); - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Idle timed out, resetting engine...\n"); - R128EngineReset(pScrn); -#ifdef XF86DRI - R128CCE_RESET(pScrn, info); - if (info->directRenderingEnabled) { - R128CCE_START(pScrn, info); - } -#endif - } -} - -#ifdef XF86DRI -/* Wait until the CCE is completely idle: the FIFO has drained and the - * CCE is idle. - */ -void R128CCEWaitForIdle(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - int ret, i; - - FLUSH_RING(); - - for (;;) { - i = 0; - do { - ret = drmCommandNone(info->drmFD, DRM_R128_CCE_IDLE); - } while ( ret && errno == EBUSY && i++ < R128_IDLE_RETRY ); - - if (ret && ret != -EBUSY) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "%s: CCE idle %d\n", __FUNCTION__, ret); - } - - if (ret == 0) return; - - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Idle timed out, resetting engine...\n"); - R128EngineReset(pScrn); - - /* Always restart the engine when doing CCE 2D acceleration */ - R128CCE_RESET(pScrn, info); - R128CCE_START(pScrn, info); - } -} - -int R128CCEStop(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - drmR128CCEStop stop; - int ret, i; - - stop.flush = 1; - stop.idle = 1; - - ret = drmCommandWrite( info->drmFD, DRM_R128_CCE_STOP, - &stop, sizeof(drmR128CCEStop) ); - - if ( ret == 0 ) { - return 0; - } else if ( errno != EBUSY ) { - return -errno; - } - - stop.flush = 0; - - i = 0; - do { - ret = drmCommandWrite( info->drmFD, DRM_R128_CCE_STOP, - &stop, sizeof(drmR128CCEStop) ); - } while ( ret && errno == EBUSY && i++ < R128_IDLE_RETRY ); - - if ( ret == 0 ) { - return 0; - } else if ( errno != EBUSY ) { - return -errno; - } - - stop.idle = 0; - - if ( drmCommandWrite( info->drmFD, DRM_R128_CCE_STOP, - &stop, sizeof(drmR128CCEStop) )) { - return -errno; - } else { - return 0; - } -} - -#endif - -/* Setup for XAA SolidFill. */ -static void R128SetupForSolidFill(ScrnInfoPtr pScrn, - int color, int rop, unsigned int planemask) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - R128WaitForFifo(pScrn, 4); - OUTREG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | R128_GMC_BRUSH_SOLID_COLOR - | R128_GMC_SRC_DATATYPE_COLOR - | R128_ROP[rop].pattern)); - OUTREG(R128_DP_BRUSH_FRGD_CLR, color); - OUTREG(R128_DP_WRITE_MASK, planemask); - OUTREG(R128_DP_CNTL, (R128_DST_X_LEFT_TO_RIGHT - | R128_DST_Y_TOP_TO_BOTTOM)); -} - -/* Subsequent XAA SolidFillRect. - - Tests: xtest CH06/fllrctngl, xterm -*/ -static void R128SubsequentSolidFillRect(ScrnInfoPtr pScrn, - int x, int y, int w, int h) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - R128WaitForFifo(pScrn, 2); - OUTREG(R128_DST_Y_X, (y << 16) | x); - OUTREG(R128_DST_WIDTH_HEIGHT, (w << 16) | h); -} - -/* Setup for XAA solid lines. */ -static void R128SetupForSolidLine(ScrnInfoPtr pScrn, - int color, int rop, unsigned int planemask) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - R128WaitForFifo(pScrn, 3); - OUTREG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | R128_GMC_BRUSH_SOLID_COLOR - | R128_GMC_SRC_DATATYPE_COLOR - | R128_ROP[rop].pattern)); - OUTREG(R128_DP_BRUSH_FRGD_CLR, color); - OUTREG(R128_DP_WRITE_MASK, planemask); -} - - -/* Subsequent XAA solid Bresenham line. - - Tests: xtest CH06/drwln, ico, Mark Vojkovich's linetest program - - [See http://www.xfree86.org/devel/archives/devel/1999-Jun/0102.shtml for - Mark Vojkovich's linetest program, posted 2Jun99 to devel@xfree86.org.] - - x11perf -line500 - 1024x768@76Hz 1024x768@76Hz - 8bpp 32bpp - not used: 39700.0/sec 34100.0/sec - used: 47600.0/sec 36800.0/sec -*/ -static void R128SubsequentSolidBresenhamLine(ScrnInfoPtr pScrn, - int x, int y, - int major, int minor, - int err, int len, int octant) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int flags = 0; - - if (octant & YMAJOR) flags |= R128_DST_Y_MAJOR; - if (!(octant & XDECREASING)) flags |= R128_DST_X_DIR_LEFT_TO_RIGHT; - if (!(octant & YDECREASING)) flags |= R128_DST_Y_DIR_TOP_TO_BOTTOM; - - R128WaitForFifo(pScrn, 6); - OUTREG(R128_DP_CNTL_XDIR_YDIR_YMAJOR, flags); - OUTREG(R128_DST_Y_X, (y << 16) | x); - OUTREG(R128_DST_BRES_ERR, err); - OUTREG(R128_DST_BRES_INC, minor); - OUTREG(R128_DST_BRES_DEC, -major); - OUTREG(R128_DST_BRES_LNTH, len); -} - -/* Subsequent XAA solid horizontal and vertical lines - - 1024x768@76Hz 8bpp - Without With - x11perf -hseg500 87600.0/sec 798000.0/sec - x11perf -vseg500 38100.0/sec 38000.0/sec -*/ -static void R128SubsequentSolidHorVertLine(ScrnInfoPtr pScrn, - int x, int y, int len, int dir ) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - R128WaitForFifo(pScrn, 1); - OUTREG(R128_DP_CNTL, (R128_DST_X_LEFT_TO_RIGHT - | R128_DST_Y_TOP_TO_BOTTOM)); - - if (dir == DEGREES_0) { - R128SubsequentSolidFillRect(pScrn, x, y, len, 1); - } else { - R128SubsequentSolidFillRect(pScrn, x, y, 1, len); - } -} - -/* Setup for XAA dashed lines. - - Tests: xtest CH05/stdshs, XFree86/drwln - - NOTE: Since we can only accelerate lines with power-of-2 patterns of - length <= 32, these x11perf numbers are not representative of the - speed-up on appropriately-sized patterns. - - 1024x768@76Hz 8bpp - Without With - x11perf -dseg100 218000.0/sec 222000.0/sec - x11perf -dline100 215000.0/sec 221000.0/sec - x11perf -ddline100 178000.0/sec 180000.0/sec -*/ -static void R128SetupForDashedLine(ScrnInfoPtr pScrn, - int fg, int bg, - int rop, unsigned int planemask, - int length, unsigned char *pattern) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - CARD32 pat = *(CARD32 *)(pointer)pattern; - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN -# define PAT_SHIFT(pat,n) pat << n -#else -# define PAT_SHIFT(pat,n) pat >> n -#endif - - switch (length) { - case 2: pat |= PAT_SHIFT(pat,2); /* fall through */ - case 4: pat |= PAT_SHIFT(pat,4); /* fall through */ - case 8: pat |= PAT_SHIFT(pat,8); /* fall through */ - case 16: pat |= PAT_SHIFT(pat,16); - } - - R128WaitForFifo(pScrn, 5); - OUTREG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | (bg == -1 - ? R128_GMC_BRUSH_32x1_MONO_FG_LA - : R128_GMC_BRUSH_32x1_MONO_FG_BG) - | R128_ROP[rop].pattern - | R128_GMC_BYTE_LSB_TO_MSB)); - OUTREG(R128_DP_WRITE_MASK, planemask); - OUTREG(R128_DP_BRUSH_FRGD_CLR, fg); - OUTREG(R128_DP_BRUSH_BKGD_CLR, bg); - OUTREG(R128_BRUSH_DATA0, pat); -} - -/* Subsequent XAA dashed line. */ -static void R128SubsequentDashedBresenhamLine(ScrnInfoPtr pScrn, - int x, int y, - int major, int minor, - int err, int len, int octant, - int phase) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int flags = 0; - - if (octant & YMAJOR) flags |= R128_DST_Y_MAJOR; - if (!(octant & XDECREASING)) flags |= R128_DST_X_DIR_LEFT_TO_RIGHT; - if (!(octant & YDECREASING)) flags |= R128_DST_Y_DIR_TOP_TO_BOTTOM; - - R128WaitForFifo(pScrn, 7); - OUTREG(R128_DP_CNTL_XDIR_YDIR_YMAJOR, flags); - OUTREG(R128_DST_Y_X, (y << 16) | x); - OUTREG(R128_BRUSH_Y_X, (phase << 16) | phase); - OUTREG(R128_DST_BRES_ERR, err); - OUTREG(R128_DST_BRES_INC, minor); - OUTREG(R128_DST_BRES_DEC, -major); - OUTREG(R128_DST_BRES_LNTH, len); -} - -#if R128_TRAPEZOIDS - /* This doesn't work. Except in the - lower-left quadrant, all of the pixel - errors appear to be because eL and eR - are not correct. Drawing from right to - left doesn't help. Be aware that the - non-_SUB registers set the sub-pixel - values to 0.5 (0x08), which isn't what - XAA wants. */ -/* Subsequent XAA SolidFillTrap. XAA always passes data that assumes we - fill from top to bottom, so dyL and dyR are always non-negative. */ -static void R128SubsequentSolidFillTrap(ScrnInfoPtr pScrn, int y, int h, - int left, int dxL, int dyL, int eL, - int right, int dxR, int dyR, int eR) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int flags = 0; - int Lymajor = 0; - int Rymajor = 0; - int origdxL = dxL; - int origdxR = dxR; - - R128TRACE(("Trap %d %d; L %d %d %d %d; R %d %d %d %d\n", - y, h, - left, dxL, dyL, eL, - right, dxR, dyR, eR)); - - if (dxL < 0) dxL = -dxL; else flags |= (1 << 0) /* | (1 << 8) */; - if (dxR < 0) dxR = -dxR; else flags |= (1 << 6); - - R128WaitForFifo(pScrn, 11); - -#if 1 - OUTREG(R128_DP_CNTL, flags | (1 << 1) | (1 << 7)); - OUTREG(R128_DST_Y_SUB, ((y) << 4) | 0x0 ); - OUTREG(R128_DST_X_SUB, ((left) << 4)|0x0); - OUTREG(R128_TRAIL_BRES_ERR, eR-dxR); - OUTREG(R128_TRAIL_BRES_INC, dxR); - OUTREG(R128_TRAIL_BRES_DEC, -dyR); - OUTREG(R128_TRAIL_X_SUB, ((right) << 4) | 0x0); - OUTREG(R128_LEAD_BRES_ERR, eL-dxL); - OUTREG(R128_LEAD_BRES_INC, dxL); - OUTREG(R128_LEAD_BRES_DEC, -dyL); - OUTREG(R128_LEAD_BRES_LNTH_SUB, ((h) << 4) | 0x00); -#else - OUTREG(R128_DP_CNTL, flags | (1 << 1) ); - OUTREG(R128_DST_Y_SUB, (y << 4)); - OUTREG(R128_DST_X_SUB, (right << 4)); - OUTREG(R128_TRAIL_BRES_ERR, eL); - OUTREG(R128_TRAIL_BRES_INC, dxL); - OUTREG(R128_TRAIL_BRES_DEC, -dyL); - OUTREG(R128_TRAIL_X_SUB, (left << 4) | 0); - OUTREG(R128_LEAD_BRES_ERR, eR); - OUTREG(R128_LEAD_BRES_INC, dxR); - OUTREG(R128_LEAD_BRES_DEC, -dyR); - OUTREG(R128_LEAD_BRES_LNTH_SUB, h << 4); -#endif -} -#endif - -/* Setup for XAA screen-to-screen copy. - - Tests: xtest CH06/fllrctngl (also tests transparency). -*/ -static void R128SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, - int xdir, int ydir, int rop, - unsigned int planemask, - int trans_color) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - info->xdir = xdir; - info->ydir = ydir; - R128WaitForFifo(pScrn, 3); - OUTREG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | R128_GMC_BRUSH_SOLID_COLOR - | R128_GMC_SRC_DATATYPE_COLOR - | R128_ROP[rop].rop - | R128_DP_SRC_SOURCE_MEMORY)); - OUTREG(R128_DP_WRITE_MASK, planemask); - OUTREG(R128_DP_CNTL, ((xdir >= 0 ? R128_DST_X_LEFT_TO_RIGHT : 0) - | (ydir >= 0 - ? R128_DST_Y_TOP_TO_BOTTOM - : 0))); - - if ((trans_color != -1) || (info->XAAForceTransBlit == TRUE)) { - /* Set up for transparency */ - R128WaitForFifo(pScrn, 3); - OUTREG(R128_CLR_CMP_CLR_SRC, trans_color); - OUTREG(R128_CLR_CMP_MASK, R128_CLR_CMP_MSK); - OUTREG(R128_CLR_CMP_CNTL, (R128_SRC_CMP_NEQ_COLOR - | R128_CLR_CMP_SRC_SOURCE)); - } -} - -/* Subsequent XAA screen-to-screen copy. */ -static void R128SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn, - int xa, int ya, - int xb, int yb, - int w, int h) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - if (info->xdir < 0) xa += w - 1, xb += w - 1; - if (info->ydir < 0) ya += h - 1, yb += h - 1; - - R128WaitForFifo(pScrn, 3); - OUTREG(R128_SRC_Y_X, (ya << 16) | xa); - OUTREG(R128_DST_Y_X, (yb << 16) | xb); - OUTREG(R128_DST_HEIGHT_WIDTH, (h << 16) | w); -} - -/* Setup for XAA mono 8x8 pattern color expansion. Patterns with - transparency use `bg == -1'. This routine is only used if the XAA - pixmap cache is turned on. - - Tests: xtest XFree86/fllrctngl (no other test will test this routine with - both transparency and non-transparency) - - 1024x768@76Hz 8bpp - Without With - x11perf -srect100 38600.0/sec 85700.0/sec - x11perf -osrect100 38600.0/sec 85700.0/sec -*/ -static void R128SetupForMono8x8PatternFill(ScrnInfoPtr pScrn, - int patternx, int patterny, - int fg, int bg, int rop, - unsigned int planemask) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - R128WaitForFifo(pScrn, 6); - OUTREG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | (bg == -1 - ? R128_GMC_BRUSH_8X8_MONO_FG_LA - : R128_GMC_BRUSH_8X8_MONO_FG_BG) - | R128_ROP[rop].pattern - | R128_GMC_BYTE_LSB_TO_MSB)); - OUTREG(R128_DP_WRITE_MASK, planemask); - OUTREG(R128_DP_BRUSH_FRGD_CLR, fg); - OUTREG(R128_DP_BRUSH_BKGD_CLR, bg); - OUTREG(R128_BRUSH_DATA0, patternx); - OUTREG(R128_BRUSH_DATA1, patterny); -} - -/* Subsequent XAA 8x8 pattern color expansion. Because they are used in - the setup function, `patternx' and `patterny' are not used here. */ -static void R128SubsequentMono8x8PatternFillRect(ScrnInfoPtr pScrn, - int patternx, int patterny, - int x, int y, int w, int h) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - R128WaitForFifo(pScrn, 3); - OUTREG(R128_BRUSH_Y_X, (patterny << 8) | patternx); - OUTREG(R128_DST_Y_X, (y << 16) | x); - OUTREG(R128_DST_HEIGHT_WIDTH, (h << 16) | w); -} - -#if 0 -/* Setup for XAA color 8x8 pattern fill. - - Tests: xtest XFree86/fllrctngl (with Mono8x8PatternFill off) -*/ -static void R128SetupForColor8x8PatternFill(ScrnInfoPtr pScrn, - int patx, int paty, - int rop, unsigned int planemask, - int trans_color) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - R128TRACE(("Color8x8 %d %d %d\n", trans_color, patx, paty)); - - R128WaitForFifo(pScrn, 2); - OUTREG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | R128_GMC_BRUSH_8x8_COLOR - | R128_GMC_SRC_DATATYPE_COLOR - | R128_ROP[rop].rop - | R128_DP_SRC_SOURCE_MEMORY)); - OUTREG(R128_DP_WRITE_MASK, planemask); - - if (trans_color != -1) { - /* Set up for transparency */ - R128WaitForFifo(pScrn, 3); - OUTREG(R128_CLR_CMP_CLR_SRC, trans_color); - OUTREG(R128_CLR_CMP_MASK, R128_CLR_CMP_MSK); - OUTREG(R128_CLR_CMP_CNTL, (R128_SRC_CMP_NEQ_COLOR - | R128_CLR_CMP_SRC_SOURCE)); - } -} - -/* Subsequent XAA 8x8 pattern color expansion. */ -static void R128SubsequentColor8x8PatternFillRect( ScrnInfoPtr pScrn, - int patx, int paty, - int x, int y, int w, int h) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - R128TRACE(("Color8x8 %d,%d %d,%d %d %d\n", patx, paty, x, y, w, h)); - R128WaitForFifo(pScrn, 3); - OUTREG(R128_SRC_Y_X, (paty << 16) | patx); - OUTREG(R128_DST_Y_X, (y << 16) | x); - OUTREG(R128_DST_HEIGHT_WIDTH, (h << 16) | w); -} -#endif - -/* Setup for XAA indirect CPU-to-screen color expansion (indirect). - Because of how the scratch buffer is initialized, this is really a - mainstore-to-screen color expansion. Transparency is supported when `bg - == -1'. - - x11perf -ftext (pure indirect): - 1024x768@76Hz 1024x768@76Hz - 8bpp 32bpp - not used: 685000.0/sec 794000.0/sec - used: 1070000.0/sec 1080000.0/sec - - We could improve this indirect routine by about 10% if the hardware - could accept DWORD padded scanlines, or if XAA could provide bit-packed - data. We might also be able to move to a direct routine if there were - more HOST_DATA registers. - - Implementing the hybrid indirect/direct scheme improved performance in a - few areas: - - 1024x768@76 8bpp - Indirect Hybrid - x11perf -oddsrect10 50100.0/sec 71700.0/sec - x11perf -oddsrect100 4240.0/sec 6660.0/sec - x11perf -bigsrect10 50300.0/sec 71100.0/sec - x11perf -bigsrect100 4190.0/sec 6800.0/sec - x11perf -polytext 584000.0/sec 714000.0/sec - x11perf -polytext16 154000.0/sec 172000.0/sec - x11perf -seg1 1780000.0/sec 1880000.0/sec - x11perf -copyplane10 42900.0/sec 58300.0/sec - x11perf -copyplane100 4400.0/sec 6710.0/sec - x11perf -putimagexy10 5090.0/sec 6670.0/sec - x11perf -putimagexy100 424.0/sec 575.0/sec - - 1024x768@76 -depth 24 -fbbpp 32 - Indirect Hybrid - x11perf -oddsrect100 4240.0/sec 6670.0/sec - x11perf -bigsrect100 4190.0/sec 6800.0/sec - x11perf -polytext 585000.0/sec 719000.0/sec - x11perf -seg1 2960000.0/sec 2990000.0/sec - x11perf -copyplane100 4400.0/sec 6700.0/sec - x11perf -putimagexy100 138.0/sec 191.0/sec - -*/ -static void R128SetupForScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn, - int fg, int bg, - int rop, - unsigned int - planemask) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - R128WaitForFifo(pScrn, 4); -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - OUTREG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | R128_GMC_DST_CLIPPING - | R128_GMC_BRUSH_NONE - | (bg == -1 - ? R128_GMC_SRC_DATATYPE_MONO_FG_LA - : R128_GMC_SRC_DATATYPE_MONO_FG_BG) - | R128_ROP[rop].rop - | R128_GMC_BYTE_LSB_TO_MSB - | R128_DP_SRC_SOURCE_HOST_DATA)); -#else /* X_BYTE_ORDER == X_BIG_ENDIAN */ - OUTREG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | R128_GMC_DST_CLIPPING - | R128_GMC_BRUSH_NONE - | (bg == -1 - ? R128_GMC_SRC_DATATYPE_MONO_FG_LA - : R128_GMC_SRC_DATATYPE_MONO_FG_BG) - | R128_ROP[rop].rop - | R128_DP_SRC_SOURCE_HOST_DATA)); -#endif - OUTREG(R128_DP_WRITE_MASK, planemask); - OUTREG(R128_DP_SRC_FRGD_CLR, fg); - OUTREG(R128_DP_SRC_BKGD_CLR, bg); -} - -/* Subsequent XAA indirect CPU-to-screen color expansion. This is only - called once for each rectangle. */ -static void R128SubsequentScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn, - int x, int y, - int w, int h, - int skipleft) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int x1clip = x+skipleft; - int x2clip = x+w; - - info->scanline_h = h; - info->scanline_words = (w + 31) >> 5; - -#if 0 - /* Seems as though the Rage128's doesn't like blitting directly - * as we must be overwriting something too quickly, therefore we - * render to the buffer first and then blit */ - if ((info->scanline_words * h) <= 9) { - /* Turn on direct for less than 9 dword colour expansion */ - info->scratch_buffer[0] - = (unsigned char *)(ADDRREG(R128_HOST_DATA_LAST) - - (info->scanline_words - 1)); - info->scanline_direct = 1; - } else -#endif - { - /* Use indirect for anything else */ - info->scratch_buffer[0] = info->scratch_save; - info->scanline_direct = 0; - } - - if (pScrn->bitsPerPixel == 24) { - x1clip *= 3; - x2clip *= 3; - } - - R128WaitForFifo(pScrn, 4 + (info->scanline_direct ? - (info->scanline_words * h) : 0) ); - OUTREG(R128_SC_TOP_LEFT, (y << 16) | (x1clip & 0xffff)); - OUTREG(R128_SC_BOTTOM_RIGHT, ((y+h-1) << 16) | ((x2clip-1) & 0xffff)); - OUTREG(R128_DST_Y_X, (y << 16) | (x & 0xffff)); - /* Have to pad the width here and use clipping engine */ - OUTREG(R128_DST_HEIGHT_WIDTH, (h << 16) | ((w + 31) & ~31)); -} - -/* Subsequent XAA indirect CPU-to-screen color expansion. This is called - once for each scanline. */ -static void R128SubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - CARD32 *p = (pointer)info->scratch_buffer[bufno]; - int i; - int left = info->scanline_words; - volatile CARD32 *d; - - if (info->scanline_direct) return; - --info->scanline_h; - while (left) { - write_mem_barrier(); - if (left <= 8) { - /* Last scanline - finish write to DATA_LAST */ - if (info->scanline_h == 0) { - R128WaitForFifo(pScrn, left); - /* Unrolling doesn't improve performance */ - for (d = ADDRREG(R128_HOST_DATA_LAST) - (left - 1); left; --left) - *d++ = *p++; - return; - } else { - R128WaitForFifo(pScrn, left); - /* Unrolling doesn't improve performance */ - for (d = ADDRREG(R128_HOST_DATA7) - (left - 1); left; --left) - *d++ = *p++; - } - } else { - R128WaitForFifo(pScrn, 8); - /* Unrolling doesn't improve performance */ - for (d = ADDRREG(R128_HOST_DATA0), i = 0; i < 8; i++) - *d++ = *p++; - left -= 8; - } - } -} - -/* Setup for XAA indirect image write. - - 1024x768@76Hz 8bpp - Without With - x11perf -putimage10 37500.0/sec 39300.0/sec - x11perf -putimage100 2150.0/sec 1170.0/sec - x11perf -putimage500 108.0/sec 49.8/sec - */ -static void R128SetupForScanlineImageWrite(ScrnInfoPtr pScrn, - int rop, - unsigned int planemask, - int trans_color, - int bpp, - int depth) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - info->scanline_bpp = bpp; - - R128WaitForFifo(pScrn, 2); - OUTREG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | R128_GMC_DST_CLIPPING - | R128_GMC_BRUSH_1X8_COLOR - | R128_GMC_SRC_DATATYPE_COLOR - | R128_ROP[rop].rop - | R128_GMC_BYTE_LSB_TO_MSB - | R128_DP_SRC_SOURCE_HOST_DATA)); - OUTREG(R128_DP_WRITE_MASK, planemask); - - if (trans_color != -1) { - /* Set up for transparency */ - R128WaitForFifo(pScrn, 3); - OUTREG(R128_CLR_CMP_CLR_SRC, trans_color); - OUTREG(R128_CLR_CMP_MASK, R128_CLR_CMP_MSK); - OUTREG(R128_CLR_CMP_CNTL, (R128_SRC_CMP_NEQ_COLOR - | R128_CLR_CMP_SRC_SOURCE)); - } -} - -/* Subsequent XAA indirect image write. This is only called once for each - rectangle. */ -static void R128SubsequentScanlineImageWriteRect(ScrnInfoPtr pScrn, - int x, int y, - int w, int h, - int skipleft) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int x1clip = x+skipleft; - int x2clip = x+w; - - int shift = 0; /* 32bpp */ - - if (pScrn->bitsPerPixel == 8) shift = 3; - else if (pScrn->bitsPerPixel == 16) shift = 1; - - info->scanline_h = h; - info->scanline_words = (w * info->scanline_bpp + 31) >> 5; - -#if 0 - /* Seeing as the CPUToScreen doesn't like this, I've done this - * here too, as it uses pretty much the same path. */ - if ((info->scanline_words * h) <= 9) { - /* Turn on direct for less than 9 dword colour expansion */ - info->scratch_buffer[0] - = (unsigned char *)(ADDRREG(R128_HOST_DATA_LAST) - - (info->scanline_words - 1)); - info->scanline_direct = 1; - } else -#endif - { - /* Use indirect for anything else */ - info->scratch_buffer[0] = info->scratch_save; - info->scanline_direct = 0; - } - - if (pScrn->bitsPerPixel == 24) { - x1clip *= 3; - x2clip *= 3; - } - - R128WaitForFifo(pScrn, 4 + (info->scanline_direct ? - (info->scanline_words * h) : 0) ); - OUTREG(R128_SC_TOP_LEFT, (y << 16) | (x1clip & 0xffff)); - OUTREG(R128_SC_BOTTOM_RIGHT, ((y+h-1) << 16) | ((x2clip-1) & 0xffff)); - OUTREG(R128_DST_Y_X, (y << 16) | (x & 0xffff)); - /* Have to pad the width here and use clipping engine */ - OUTREG(R128_DST_HEIGHT_WIDTH, (h << 16) | ((w + shift) & ~shift)); -} - -/* Subsequent XAA indirect iamge write. This is called once for each - scanline. */ -static void R128SubsequentImageWriteScanline(ScrnInfoPtr pScrn, int bufno) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - CARD32 *p = (pointer)info->scratch_buffer[bufno]; - int i; - int left = info->scanline_words; - volatile CARD32 *d; - - if (info->scanline_direct) return; - --info->scanline_h; - while (left) { - write_mem_barrier(); - if (left <= 8) { - /* Last scanline - finish write to DATA_LAST */ - if (info->scanline_h == 0) { - R128WaitForFifo(pScrn, left); - /* Unrolling doesn't improve performance */ - for (d = ADDRREG(R128_HOST_DATA_LAST) - (left - 1); left; --left) - *d++ = *p++; - return; - } else { - R128WaitForFifo(pScrn, left); - /* Unrolling doesn't improve performance */ - for (d = ADDRREG(R128_HOST_DATA7) - (left - 1); left; --left) - *d++ = *p++; - } - } else { - R128WaitForFifo(pScrn, 8); - /* Unrolling doesn't improve performance */ - for (d = ADDRREG(R128_HOST_DATA0), i = 0; i < 8; i++) - *d++ = *p++; - left -= 8; - } - } -} - -/* Initialize the acceleration hardware. */ -void R128EngineInit(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - R128TRACE(("EngineInit (%d/%d)\n", info->CurrentLayout.pixel_code, info->CurrentLayout.bitsPerPixel)); - - OUTREG(R128_SCALE_3D_CNTL, 0); - R128EngineReset(pScrn); - - switch (info->CurrentLayout.pixel_code) { - case 8: info->datatype = 2; break; - case 15: info->datatype = 3; break; - case 16: info->datatype = 4; break; - case 24: info->datatype = 5; break; - case 32: info->datatype = 6; break; - default: - R128TRACE(("Unknown depth/bpp = %d/%d (code = %d)\n", - info->CurrentLayout.depth, info->CurrentLayout.bitsPerPixel, - info->CurrentLayout.pixel_code)); - } - info->pitch = (info->CurrentLayout.displayWidth / 8) * (info->CurrentLayout.pixel_bytes == 3 ? 3 : 1); - - R128TRACE(("Pitch for acceleration = %d\n", info->pitch)); - - R128WaitForFifo(pScrn, 2); - OUTREG(R128_DEFAULT_OFFSET, 0); - OUTREG(R128_DEFAULT_PITCH, info->pitch); - - R128WaitForFifo(pScrn, 4); - OUTREG(R128_AUX_SC_CNTL, 0); - OUTREG(R128_DEFAULT_SC_BOTTOM_RIGHT, (R128_DEFAULT_SC_RIGHT_MAX - | R128_DEFAULT_SC_BOTTOM_MAX)); - OUTREG(R128_SC_TOP_LEFT, 0); - OUTREG(R128_SC_BOTTOM_RIGHT, (R128_DEFAULT_SC_RIGHT_MAX - | R128_DEFAULT_SC_BOTTOM_MAX)); - - info->dp_gui_master_cntl = ((info->datatype << R128_GMC_DST_DATATYPE_SHIFT) - | R128_GMC_CLR_CMP_CNTL_DIS - | R128_GMC_AUX_CLIP_DIS); - R128WaitForFifo(pScrn, 1); - OUTREG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | R128_GMC_BRUSH_SOLID_COLOR - | R128_GMC_SRC_DATATYPE_COLOR)); - - R128WaitForFifo(pScrn, 8); - OUTREG(R128_DST_BRES_ERR, 0); - OUTREG(R128_DST_BRES_INC, 0); - OUTREG(R128_DST_BRES_DEC, 0); - OUTREG(R128_DP_BRUSH_FRGD_CLR, 0xffffffff); - OUTREG(R128_DP_BRUSH_BKGD_CLR, 0x00000000); - OUTREG(R128_DP_SRC_FRGD_CLR, 0xffffffff); - OUTREG(R128_DP_SRC_BKGD_CLR, 0x00000000); - OUTREG(R128_DP_WRITE_MASK, 0xffffffff); - - R128WaitForFifo(pScrn, 1); - -#if X_BYTE_ORDER == X_BIG_ENDIAN - /* FIXME: this is a kludge for texture uploads in the 3D driver. Look at - * how the radeon driver handles HOST_DATA_SWAP if you want to implement - * CCE ImageWrite acceleration or anything needing this bit */ -#ifdef XF86DRI - if (info->directRenderingEnabled) - OUTREGP(R128_DP_DATATYPE, 0, ~R128_HOST_BIG_ENDIAN_EN); - else -#endif - OUTREGP(R128_DP_DATATYPE, - R128_HOST_BIG_ENDIAN_EN, ~R128_HOST_BIG_ENDIAN_EN); -#else /* X_LITTLE_ENDIAN */ - OUTREGP(R128_DP_DATATYPE, 0, ~R128_HOST_BIG_ENDIAN_EN); -#endif - -#ifdef XF86DRI - info->sc_left = 0x00000000; - info->sc_right = R128_DEFAULT_SC_RIGHT_MAX; - info->sc_top = 0x00000000; - info->sc_bottom = R128_DEFAULT_SC_BOTTOM_MAX; - - info->re_top_left = 0x00000000; - info->re_width_height = ((0x7ff << R128_RE_WIDTH_SHIFT) | - (0x7ff << R128_RE_HEIGHT_SHIFT)); - - info->aux_sc_cntl = 0x00000000; -#endif - - R128WaitForIdle(pScrn); -} - -#ifdef XF86DRI - -/* Setup for XAA SolidFill. */ -static void R128CCESetupForSolidFill(ScrnInfoPtr pScrn, - int color, int rop, - unsigned int planemask) -{ - R128InfoPtr info = R128PTR(pScrn); - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - BEGIN_RING( 8 ); - - OUT_RING_REG( R128_DP_GUI_MASTER_CNTL, - (info->dp_gui_master_cntl - | R128_GMC_BRUSH_SOLID_COLOR - | R128_GMC_SRC_DATATYPE_COLOR - | R128_ROP[rop].pattern) ); - - OUT_RING_REG( R128_DP_BRUSH_FRGD_CLR, color ); - OUT_RING_REG( R128_DP_WRITE_MASK, planemask ); - OUT_RING_REG( R128_DP_CNTL, (R128_DST_X_LEFT_TO_RIGHT | - R128_DST_Y_TOP_TO_BOTTOM)); - ADVANCE_RING(); -} - -/* Subsequent XAA SolidFillRect. - - Tests: xtest CH06/fllrctngl, xterm -*/ -static void R128CCESubsequentSolidFillRect(ScrnInfoPtr pScrn, - int x, int y, int w, int h) -{ - R128InfoPtr info = R128PTR(pScrn); - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - BEGIN_RING( 4 ); - - OUT_RING_REG( R128_DST_Y_X, (y << 16) | x ); - OUT_RING_REG( R128_DST_WIDTH_HEIGHT, (w << 16) | h ); - - ADVANCE_RING(); -} - -/* Setup for XAA screen-to-screen copy. - - Tests: xtest CH06/fllrctngl (also tests transparency). -*/ -static void R128CCESetupForScreenToScreenCopy(ScrnInfoPtr pScrn, - int xdir, int ydir, int rop, - unsigned int planemask, - int trans_color) -{ - R128InfoPtr info = R128PTR(pScrn); - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - info->xdir = xdir; - info->ydir = ydir; - - BEGIN_RING( 6 ); - - OUT_RING_REG( R128_DP_GUI_MASTER_CNTL, - (info->dp_gui_master_cntl - | R128_GMC_BRUSH_NONE - | R128_GMC_SRC_DATATYPE_COLOR - | R128_ROP[rop].rop - | R128_DP_SRC_SOURCE_MEMORY) ); - - OUT_RING_REG( R128_DP_WRITE_MASK, planemask ); - OUT_RING_REG( R128_DP_CNTL, - ((xdir >= 0 ? R128_DST_X_LEFT_TO_RIGHT : 0) | - (ydir >= 0 ? R128_DST_Y_TOP_TO_BOTTOM : 0)) ); - - ADVANCE_RING(); - - if ((trans_color != -1) || (info->XAAForceTransBlit == TRUE)) { - BEGIN_RING( 6 ); - - OUT_RING_REG( R128_CLR_CMP_CLR_SRC, trans_color ); - OUT_RING_REG( R128_CLR_CMP_MASK, R128_CLR_CMP_MSK ); - OUT_RING_REG( R128_CLR_CMP_CNTL, (R128_SRC_CMP_NEQ_COLOR | - R128_CLR_CMP_SRC_SOURCE) ); - - ADVANCE_RING(); - } -} - -/* Subsequent XAA screen-to-screen copy. */ -static void R128CCESubsequentScreenToScreenCopy(ScrnInfoPtr pScrn, - int xa, int ya, - int xb, int yb, - int w, int h) -{ - R128InfoPtr info = R128PTR(pScrn); - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - if (info->xdir < 0) xa += w - 1, xb += w - 1; - if (info->ydir < 0) ya += h - 1, yb += h - 1; - - BEGIN_RING( 6 ); - - OUT_RING_REG( R128_SRC_Y_X, (ya << 16) | xa ); - OUT_RING_REG( R128_DST_Y_X, (yb << 16) | xb ); - OUT_RING_REG( R128_DST_HEIGHT_WIDTH, (h << 16) | w ); - - ADVANCE_RING(); -} - - -/* - * XAA scanline color expansion - * - * We use HOSTDATA_BLT CCE packets, dividing the image in chunks that fit into - * the indirect buffer if necessary. - */ -static void R128CCESetupForScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn, - int fg, int bg, - int rop, - unsigned int - planemask) -{ - R128InfoPtr info = R128PTR(pScrn); - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - BEGIN_RING( 2 ); - OUT_RING_REG(R128_DP_WRITE_MASK, planemask); - ADVANCE_RING(); - - info->scanline_rop = rop; - info->scanline_fg = fg; - info->scanline_bg = bg; -} - -/* Helper function to write out a HOSTDATA_BLT packet into the indirect buffer - and set the XAA scratch buffer address appropriately */ -static void R128CCEScanlineCPUToScreenColorExpandFillPacket(ScrnInfoPtr pScrn, - int bufno) -{ - R128InfoPtr info = R128PTR(pScrn); - int chunk_words = info->scanline_hpass * info->scanline_words; - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - BEGIN_RING( chunk_words+9 ); - - OUT_RING( CCE_PACKET3( R128_CCE_PACKET3_CNTL_HOSTDATA_BLT, chunk_words+9-2 ) ); -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - OUT_RING( (info->dp_gui_master_cntl - | R128_GMC_DST_CLIPPING - | R128_GMC_BRUSH_NONE - | (info->scanline_bg == -1 - ? R128_GMC_SRC_DATATYPE_MONO_FG_LA - : R128_GMC_SRC_DATATYPE_MONO_FG_BG) - | R128_ROP[info->scanline_rop].rop - | R128_GMC_BYTE_LSB_TO_MSB - | R128_DP_SRC_SOURCE_HOST_DATA)); -#else /* X_BYTE_ORDER == X_BIG_ENDIAN */ - OUT_RING( (info->dp_gui_master_cntl - | R128_GMC_DST_CLIPPING - | R128_GMC_BRUSH_NONE - | (info->scanline_bg == -1 - ? R128_GMC_SRC_DATATYPE_MONO_FG_LA - : R128_GMC_SRC_DATATYPE_MONO_FG_BG) - | R128_ROP[info->scanline_rop].rop - | R128_DP_SRC_SOURCE_HOST_DATA)); -#endif - OUT_RING( (info->scanline_y << 16) | (info->scanline_x1clip & 0xffff) ); - OUT_RING( ((info->scanline_y+info->scanline_hpass-1) << 16) | ((info->scanline_x2clip-1) & 0xffff) ); - OUT_RING( info->scanline_fg ); - OUT_RING( info->scanline_bg ); - OUT_RING( (info->scanline_y << 16) | (info->scanline_x & 0xffff)); - - /* Have to pad the width here and use clipping engine */ - OUT_RING( (info->scanline_hpass << 16) | ((info->scanline_w + 31) & ~31)); - - OUT_RING( chunk_words ); - - info->scratch_buffer[bufno] = (unsigned char *) &__head[__count]; - __count += chunk_words; - - ADVANCE_RING(); - - info->scanline_y += info->scanline_hpass; - info->scanline_h -= info->scanline_hpass; - - if ( R128_VERBOSE ) - xf86DrvMsg( pScrn->scrnIndex, X_INFO, - "%s: hpass=%d, words=%d => chunk_words=%d, y=%d, h=%d\n", - __FUNCTION__, info->scanline_hpass, info->scanline_words, - chunk_words, info->scanline_y, info->scanline_h ); -} - -/* Subsequent XAA indirect CPU-to-screen color expansion. This is only - called once for each rectangle. */ -static void R128CCESubsequentScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn, - int x, int y, - int w, int h, - int skipleft) -{ - R128InfoPtr info = R128PTR(pScrn); - -#define BUFSIZE ( R128_BUFFER_SIZE/4-9 ) - - info->scanline_x = x; - info->scanline_y = y; - info->scanline_w = w; - info->scanline_h = h; - - info->scanline_x1clip = x+skipleft; - info->scanline_x2clip = x+w; - - info->scanline_words = (w + 31) >> 5; - info->scanline_hpass = min(h,(BUFSIZE/info->scanline_words)); - - if ( R128_VERBOSE ) - xf86DrvMsg( pScrn->scrnIndex, X_INFO, - "%s: x=%d, y=%d, w=%d, h=%d, skipleft=%d => x1clip=%d, x2clip=%d, hpass=%d, words=%d\n", - __FUNCTION__, x, y, w, h, skipleft, info->scanline_x1clip, info->scanline_x2clip, - info->scanline_hpass, info->scanline_words ); - - R128CCEScanlineCPUToScreenColorExpandFillPacket(pScrn, 0); -} - -/* Subsequent XAA indirect CPU-to-screen color expansion. This is called - once for each scanline. */ -static void R128CCESubsequentColorExpandScanline(ScrnInfoPtr pScrn, - int bufno) -{ - R128InfoPtr info = R128PTR(pScrn); - - if ( R128_VERBOSE ) - xf86DrvMsg( pScrn->scrnIndex, X_INFO, - "%s enter: scanline_hpass=%d, scanline_h=%d\n", - __FUNCTION__, info->scanline_hpass, info->scanline_h ); - - if (--info->scanline_hpass) { - info->scratch_buffer[bufno] += 4 * info->scanline_words; - } - else if(info->scanline_h) { - info->scanline_hpass = min(info->scanline_h,(BUFSIZE/info->scanline_words)); - R128CCEScanlineCPUToScreenColorExpandFillPacket(pScrn, bufno); - } - - if ( R128_VERBOSE ) - xf86DrvMsg( pScrn->scrnIndex, X_INFO, - "%s exit: scanline_hpass=%d, scanline_h=%d\n", - __FUNCTION__, info->scanline_hpass, info->scanline_h ); -} - -/* Solid lines */ -static void R128CCESetupForSolidLine(ScrnInfoPtr pScrn, - int color, int rop, unsigned int planemask) -{ - R128InfoPtr info = R128PTR(pScrn); - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - BEGIN_RING( 6 ); - - OUT_RING_REG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | R128_GMC_BRUSH_SOLID_COLOR - | R128_GMC_SRC_DATATYPE_COLOR - | R128_ROP[rop].pattern)); - OUT_RING_REG(R128_DP_BRUSH_FRGD_CLR, color); - OUT_RING_REG(R128_DP_WRITE_MASK, planemask); - - ADVANCE_RING(); -} - -static void R128CCESubsequentSolidBresenhamLine(ScrnInfoPtr pScrn, - int x, int y, - int major, int minor, - int err, int len, int octant) -{ - R128InfoPtr info = R128PTR(pScrn); - int flags = 0; - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - if (octant & YMAJOR) flags |= R128_DST_Y_MAJOR; - if (!(octant & XDECREASING)) flags |= R128_DST_X_DIR_LEFT_TO_RIGHT; - if (!(octant & YDECREASING)) flags |= R128_DST_Y_DIR_TOP_TO_BOTTOM; - - BEGIN_RING( 12 ); - - OUT_RING_REG(R128_DP_CNTL_XDIR_YDIR_YMAJOR, flags); - OUT_RING_REG(R128_DST_Y_X, (y << 16) | x); - OUT_RING_REG(R128_DST_BRES_ERR, err); - OUT_RING_REG(R128_DST_BRES_INC, minor); - OUT_RING_REG(R128_DST_BRES_DEC, -major); - OUT_RING_REG(R128_DST_BRES_LNTH, len); - - ADVANCE_RING(); -} - -static void R128CCESubsequentSolidHorVertLine(ScrnInfoPtr pScrn, - int x, int y, int len, int dir ) -{ - R128InfoPtr info = R128PTR(pScrn); - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - BEGIN_RING( 2 ); - - OUT_RING_REG(R128_DP_CNTL, (R128_DST_X_LEFT_TO_RIGHT - | R128_DST_Y_TOP_TO_BOTTOM)); - - ADVANCE_RING(); - - if (dir == DEGREES_0) { - R128CCESubsequentSolidFillRect(pScrn, x, y, len, 1); - } else { - R128CCESubsequentSolidFillRect(pScrn, x, y, 1, len); - } -} - -/* Dashed lines */ -static void R128CCESetupForDashedLine(ScrnInfoPtr pScrn, - int fg, int bg, - int rop, unsigned int planemask, - int length, unsigned char *pattern) -{ - R128InfoPtr info = R128PTR(pScrn); - CARD32 pat = *(CARD32 *)(pointer)pattern; - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN -# define PAT_SHIFT(pat,n) pat << n -#else -# define PAT_SHIFT(pat,n) pat >> n -#endif - - switch (length) { - case 2: pat |= PAT_SHIFT(pat,2); /* fall through */ - case 4: pat |= PAT_SHIFT(pat,4); /* fall through */ - case 8: pat |= PAT_SHIFT(pat,8); /* fall through */ - case 16: pat |= PAT_SHIFT(pat,16); - } - - BEGIN_RING( 10 ); - - OUT_RING_REG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | (bg == -1 - ? R128_GMC_BRUSH_32x1_MONO_FG_LA - : R128_GMC_BRUSH_32x1_MONO_FG_BG) - | R128_ROP[rop].pattern - | R128_GMC_BYTE_LSB_TO_MSB)); - OUT_RING_REG(R128_DP_WRITE_MASK, planemask); - OUT_RING_REG(R128_DP_BRUSH_FRGD_CLR, fg); - OUT_RING_REG(R128_DP_BRUSH_BKGD_CLR, bg); - OUT_RING_REG(R128_BRUSH_DATA0, pat); - - ADVANCE_RING(); -} - -static void R128CCESubsequentDashedBresenhamLine(ScrnInfoPtr pScrn, - int x, int y, - int major, int minor, - int err, int len, int octant, - int phase) -{ - R128InfoPtr info = R128PTR(pScrn); - int flags = 0; - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - if (octant & YMAJOR) flags |= R128_DST_Y_MAJOR; - if (!(octant & XDECREASING)) flags |= R128_DST_X_DIR_LEFT_TO_RIGHT; - if (!(octant & YDECREASING)) flags |= R128_DST_Y_DIR_TOP_TO_BOTTOM; - - BEGIN_RING( 14 ); - - OUT_RING_REG(R128_DP_CNTL_XDIR_YDIR_YMAJOR, flags); - OUT_RING_REG(R128_DST_Y_X, (y << 16) | x); - OUT_RING_REG(R128_BRUSH_Y_X, (phase << 16) | phase); - OUT_RING_REG(R128_DST_BRES_ERR, err); - OUT_RING_REG(R128_DST_BRES_INC, minor); - OUT_RING_REG(R128_DST_BRES_DEC, -major); - OUT_RING_REG(R128_DST_BRES_LNTH, len); - - ADVANCE_RING(); -} - -/* Mono 8x8 pattern color expansion */ -static void R128CCESetupForMono8x8PatternFill(ScrnInfoPtr pScrn, - int patternx, int patterny, - int fg, int bg, int rop, - unsigned int planemask) -{ - R128InfoPtr info = R128PTR(pScrn); - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - BEGIN_RING( 12 ); - - OUT_RING_REG(R128_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | (bg == -1 - ? R128_GMC_BRUSH_8X8_MONO_FG_LA - : R128_GMC_BRUSH_8X8_MONO_FG_BG) - | R128_ROP[rop].pattern - | R128_GMC_BYTE_LSB_TO_MSB)); - OUT_RING_REG(R128_DP_WRITE_MASK, planemask); - OUT_RING_REG(R128_DP_BRUSH_FRGD_CLR, fg); - OUT_RING_REG(R128_DP_BRUSH_BKGD_CLR, bg); - OUT_RING_REG(R128_BRUSH_DATA0, patternx); - OUT_RING_REG(R128_BRUSH_DATA1, patterny); - - ADVANCE_RING(); -} - -static void R128CCESubsequentMono8x8PatternFillRect(ScrnInfoPtr pScrn, - int patternx, int patterny, - int x, int y, int w, int h) -{ - R128InfoPtr info = R128PTR(pScrn); - RING_LOCALS; - - R128CCE_REFRESH( pScrn, info ); - - BEGIN_RING( 6 ); - - OUT_RING_REG(R128_BRUSH_Y_X, (patterny << 8) | patternx); - OUT_RING_REG(R128_DST_Y_X, (y << 16) | x); - OUT_RING_REG(R128_DST_HEIGHT_WIDTH, (h << 16) | w); - - ADVANCE_RING(); -} - -/* Get an indirect buffer for the CCE 2D acceleration commands. - */ -drmBufPtr R128CCEGetBuffer( ScrnInfoPtr pScrn ) -{ - R128InfoPtr info = R128PTR(pScrn); - drmDMAReq dma; - drmBufPtr buf = NULL; - int indx = 0; - int size = 0; - int ret, i = 0; - -#if 0 - /* FIXME: pScrn->pScreen has not been initialized when this is first - called from RADEONSelectBuffer via RADEONDRICPInit. We could use - the screen index from pScrn, which is initialized, and then get - the screen from screenInfo.screens[index], but that is a hack. */ - dma.context = DRIGetContext(pScrn->pScreen); -#else - dma.context = 0x00000001; /* This is the X server's context */ -#endif - dma.send_count = 0; - dma.send_list = NULL; - dma.send_sizes = NULL; - dma.flags = 0; - dma.request_count = 1; - dma.request_size = R128_BUFFER_SIZE; - dma.request_list = &indx; - dma.request_sizes = &size; - dma.granted_count = 0; - - while ( 1 ) { - do { - ret = drmDMA( info->drmFD, &dma ); - if ( ret && ret != -EAGAIN ) { - xf86DrvMsg( pScrn->scrnIndex, X_ERROR, - "%s: CCE GetBuffer %d\n", __FUNCTION__, ret ); - } - } while ( ( ret == -EAGAIN ) && ( i++ < R128_TIMEOUT ) ); - - if ( ret == 0 ) { - buf = &info->buffers->list[indx]; - buf->used = 0; - if ( R128_VERBOSE ) { - xf86DrvMsg( pScrn->scrnIndex, X_INFO, - " GetBuffer returning %d\n", buf->idx ); - } - return buf; - } - - xf86DrvMsg( pScrn->scrnIndex, X_ERROR, - "GetBuffer timed out, resetting engine...\n"); - R128EngineReset( pScrn ); - /* R128EngineRestore( pScrn ); FIXME ??? */ - - /* Always restart the engine when doing CCE 2D acceleration */ - R128CCE_RESET( pScrn, info ); - R128CCE_START( pScrn, info ); - } -} - -/* Flush the indirect buffer to the kernel for submission to the card. - */ -void R128CCEFlushIndirect( ScrnInfoPtr pScrn, int discard ) -{ - R128InfoPtr info = R128PTR(pScrn); - drmBufPtr buffer = info->indirectBuffer; - int start = info->indirectStart; - drmR128Indirect indirect; - - if ( !buffer ) - return; - - if ( (start == buffer->used) && !discard ) - return; - - indirect.idx = buffer->idx; - indirect.start = start; - indirect.end = buffer->used; - indirect.discard = discard; - - drmCommandWriteRead( info->drmFD, DRM_R128_INDIRECT, - &indirect, sizeof(drmR128Indirect)); - - if ( discard ) - buffer = info->indirectBuffer = R128CCEGetBuffer( pScrn ); - - /* pad to an even number of dwords */ - if (buffer->used & 7) - buffer->used = ( buffer->used+7 ) & ~7; - - info->indirectStart = buffer->used; -} - -/* Flush and release the indirect buffer. - */ -void R128CCEReleaseIndirect( ScrnInfoPtr pScrn ) -{ - R128InfoPtr info = R128PTR(pScrn); - drmBufPtr buffer = info->indirectBuffer; - int start = info->indirectStart; - drmR128Indirect indirect; - - info->indirectBuffer = NULL; - info->indirectStart = 0; - - if ( !buffer ) - return; - - indirect.idx = buffer->idx; - indirect.start = start; - indirect.end = buffer->used; - indirect.discard = 1; - - drmCommandWriteRead( info->drmFD, DRM_R128_INDIRECT, - &indirect, sizeof(drmR128Indirect)); -} - -static void R128CCEAccelInit(ScrnInfoPtr pScrn, XAAInfoRecPtr a) -{ - R128InfoPtr info = R128PTR(pScrn); - - a->Flags = (PIXMAP_CACHE - | OFFSCREEN_PIXMAPS - | LINEAR_FRAMEBUFFER); - - /* Sync */ - a->Sync = R128CCEWaitForIdle; - - /* Solid Filled Rectangle */ - a->PolyFillRectSolidFlags = 0; - a->SetupForSolidFill = R128CCESetupForSolidFill; - a->SubsequentSolidFillRect = R128CCESubsequentSolidFillRect; - - /* Screen-to-screen Copy */ - /* Transparency uses the wrong colors for - 24 bpp mode -- the transparent part is - correct, but the opaque color is wrong. - This can be seen with netscape's I-bar - cursor when editing in the URL location - box. */ - a->ScreenToScreenCopyFlags = ((pScrn->bitsPerPixel == 24) - ? NO_TRANSPARENCY - : 0); - a->SetupForScreenToScreenCopy = R128CCESetupForScreenToScreenCopy; - a->SubsequentScreenToScreenCopy = R128CCESubsequentScreenToScreenCopy; - - /* Indirect CPU-To-Screen Color Expand */ - a->ScanlineCPUToScreenColorExpandFillFlags = LEFT_EDGE_CLIPPING - | LEFT_EDGE_CLIPPING_NEGATIVE_X; - a->NumScanlineColorExpandBuffers = 1; - a->ScanlineColorExpandBuffers = info->scratch_buffer; - info->scratch_buffer[0] = NULL; - a->SetupForScanlineCPUToScreenColorExpandFill - = R128CCESetupForScanlineCPUToScreenColorExpandFill; - a->SubsequentScanlineCPUToScreenColorExpandFill - = R128CCESubsequentScanlineCPUToScreenColorExpandFill; - a->SubsequentColorExpandScanline = R128CCESubsequentColorExpandScanline; - - /* Bresenham Solid Lines */ - a->SetupForSolidLine = R128CCESetupForSolidLine; - a->SubsequentSolidBresenhamLine = R128CCESubsequentSolidBresenhamLine; - a->SubsequentSolidHorVertLine = R128CCESubsequentSolidHorVertLine; - - /* Bresenham Dashed Lines*/ - a->SetupForDashedLine = R128CCESetupForDashedLine; - a->SubsequentDashedBresenhamLine = R128CCESubsequentDashedBresenhamLine; - a->DashPatternMaxLength = 32; - a->DashedLineFlags = (LINE_PATTERN_LSBFIRST_LSBJUSTIFIED - | LINE_PATTERN_POWER_OF_2_ONLY); - - /* Mono 8x8 Pattern Fill (Color Expand) */ - a->SetupForMono8x8PatternFill = R128CCESetupForMono8x8PatternFill; - a->SubsequentMono8x8PatternFillRect = R128CCESubsequentMono8x8PatternFillRect; - a->Mono8x8PatternFillFlags = (HARDWARE_PATTERN_PROGRAMMED_BITS - | HARDWARE_PATTERN_PROGRAMMED_ORIGIN - | HARDWARE_PATTERN_SCREEN_ORIGIN - | BIT_ORDER_IN_BYTE_LSBFIRST); -} -#endif - -static void R128MMIOAccelInit(ScrnInfoPtr pScrn, XAAInfoRecPtr a) -{ - R128InfoPtr info = R128PTR(pScrn); - - a->Flags = (PIXMAP_CACHE - | OFFSCREEN_PIXMAPS - | LINEAR_FRAMEBUFFER); - - /* Sync */ - a->Sync = R128WaitForIdle; - - /* Solid Filled Rectangle */ - a->PolyFillRectSolidFlags = 0; - a->SetupForSolidFill = R128SetupForSolidFill; - a->SubsequentSolidFillRect = R128SubsequentSolidFillRect; - - /* Screen-to-screen Copy */ - /* Transparency uses the wrong colors for - 24 bpp mode -- the transparent part is - correct, but the opaque color is wrong. - This can be seen with netscape's I-bar - cursor when editing in the URL location - box. */ - a->ScreenToScreenCopyFlags = ((pScrn->bitsPerPixel == 24) - ? NO_TRANSPARENCY - : 0); - a->SetupForScreenToScreenCopy = R128SetupForScreenToScreenCopy; - a->SubsequentScreenToScreenCopy = R128SubsequentScreenToScreenCopy; - - /* Mono 8x8 Pattern Fill (Color Expand) */ - a->SetupForMono8x8PatternFill = R128SetupForMono8x8PatternFill; - a->SubsequentMono8x8PatternFillRect = R128SubsequentMono8x8PatternFillRect; - a->Mono8x8PatternFillFlags = (HARDWARE_PATTERN_PROGRAMMED_BITS - | HARDWARE_PATTERN_PROGRAMMED_ORIGIN - | HARDWARE_PATTERN_SCREEN_ORIGIN - | BIT_ORDER_IN_BYTE_LSBFIRST); - - /* Indirect CPU-To-Screen Color Expand */ - a->ScanlineCPUToScreenColorExpandFillFlags = LEFT_EDGE_CLIPPING - | LEFT_EDGE_CLIPPING_NEGATIVE_X; - a->NumScanlineColorExpandBuffers = 1; - a->ScanlineColorExpandBuffers = info->scratch_buffer; - info->scratch_save = xalloc(((pScrn->virtualX+31)/32*4) - + (pScrn->virtualX - * info->CurrentLayout.pixel_bytes)); - info->scratch_buffer[0] = info->scratch_save; - a->SetupForScanlineCPUToScreenColorExpandFill - = R128SetupForScanlineCPUToScreenColorExpandFill; - a->SubsequentScanlineCPUToScreenColorExpandFill - = R128SubsequentScanlineCPUToScreenColorExpandFill; - a->SubsequentColorExpandScanline = R128SubsequentColorExpandScanline; - - /* Bresenham Solid Lines */ - a->SetupForSolidLine = R128SetupForSolidLine; - a->SubsequentSolidBresenhamLine = R128SubsequentSolidBresenhamLine; - a->SubsequentSolidHorVertLine = R128SubsequentSolidHorVertLine; - - /* Bresenham Dashed Lines*/ - a->SetupForDashedLine = R128SetupForDashedLine; - a->SubsequentDashedBresenhamLine = R128SubsequentDashedBresenhamLine; - a->DashPatternMaxLength = 32; - a->DashedLineFlags = (LINE_PATTERN_LSBFIRST_LSBJUSTIFIED - | LINE_PATTERN_POWER_OF_2_ONLY); - - /* ImageWrite */ - a->NumScanlineImageWriteBuffers = 1; - a->ScanlineImageWriteBuffers = info->scratch_buffer; - info->scratch_buffer[0] = info->scratch_save; - a->SetupForScanlineImageWrite = R128SetupForScanlineImageWrite; - a->SubsequentScanlineImageWriteRect= R128SubsequentScanlineImageWriteRect; - a->SubsequentImageWriteScanline = R128SubsequentImageWriteScanline; - a->ScanlineImageWriteFlags = CPU_TRANSFER_PAD_DWORD - /* Performance tests show that we shouldn't use GXcopy for - * uploads as a memcpy is faster */ - | NO_GXCOPY - | LEFT_EDGE_CLIPPING - | LEFT_EDGE_CLIPPING_NEGATIVE_X - | SCANLINE_PAD_DWORD; -} - -/* Initialize XAA for supported acceleration and also initialize the - graphics hardware for acceleration. */ -Bool R128AccelInit(ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - R128InfoPtr info = R128PTR(pScrn); - XAAInfoRecPtr a; - - if (!(a = info->accel = XAACreateInfoRec())) return FALSE; - -#ifdef XF86DRI - if (info->directRenderingEnabled) - R128CCEAccelInit(pScrn, a); - else -#endif - R128MMIOAccelInit(pScrn, a); - - R128EngineInit(pScrn); - return XAAInit(pScreen, a); -} diff --git a/src/r128_common.h b/src/r128_common.h deleted file mode 100644 index 506f97c6..00000000 --- a/src/r128_common.h +++ /dev/null @@ -1,171 +0,0 @@ -/* r128_common.h -- common header definitions for R128 2D/3D/DRM suite - * Created: Sun Apr 9 18:16:28 2000 by kevin@precisioninsight.com - * - * Copyright 1999, 2000 Precision Insight, Inc., Cedar Park, Texas. - * Copyright 2002 Tungsten Graphics, Inc., Cedar Park, Texas. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Author: - * Gareth Hughes <gareth@valinux.com> - * Kevin E. Martin <martin@valinux.com> - * - * Converted to common header format: - * Jens Owen <jens@tungstengraphics.com> - * - * $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_common.h,v 1.2 2002/12/16 16:19:10 dawes Exp $ - * - */ - -#ifndef _R128_COMMON_H_ -#define _R128_COMMON_H_ - -#include "X11/Xmd.h" - -/* - * WARNING: If you change any of these defines, make sure to change - * the kernel include file as well (r128_drm.h) - */ - -/* Driver specific DRM command indices - * NOTE: these are not OS specific, but they are driver specific - */ -#define DRM_R128_INIT 0x00 -#define DRM_R128_CCE_START 0x01 -#define DRM_R128_CCE_STOP 0x02 -#define DRM_R128_CCE_RESET 0x03 -#define DRM_R128_CCE_IDLE 0x04 -#define DRM_R128_UNDEFINED1 0x05 -#define DRM_R128_RESET 0x06 -#define DRM_R128_SWAP 0x07 -#define DRM_R128_CLEAR 0x08 -#define DRM_R128_VERTEX 0x09 -#define DRM_R128_INDICES 0x0a -#define DRM_R128_BLIT 0x0b -#define DRM_R128_DEPTH 0x0c -#define DRM_R128_STIPPLE 0x0d -#define DRM_R128_UNDEFINED2 0x0e -#define DRM_R128_INDIRECT 0x0f -#define DRM_R128_FULLSCREEN 0x10 -#define DRM_R128_CLEAR2 0x11 -#define DRM_R128_GETPARAM 0x12 -#define DRM_R128_FLIP 0x13 - -#define DRM_R128_FRONT_BUFFER 0x1 -#define DRM_R128_BACK_BUFFER 0x2 -#define DRM_R128_DEPTH_BUFFER 0x4 - -typedef struct { - enum { - DRM_R128_INIT_CCE = 0x01, - DRM_R128_CLEANUP_CCE = 0x02 - } func; - unsigned long sarea_priv_offset; - int is_pci; - int cce_mode; - int cce_secure; /* FIXME: Deprecated, we should remove this */ - int ring_size; - int usec_timeout; - - unsigned int fb_bpp; - unsigned int front_offset, front_pitch; - unsigned int back_offset, back_pitch; - unsigned int depth_bpp; - unsigned int depth_offset, depth_pitch; - unsigned int span_offset; - - unsigned long fb_offset; - unsigned long mmio_offset; - unsigned long ring_offset; - unsigned long ring_rptr_offset; - unsigned long buffers_offset; - unsigned long agp_textures_offset; -} drmR128Init; - -typedef struct { - int flush; - int idle; -} drmR128CCEStop; - -typedef struct { - int idx; - int start; - int end; - int discard; -} drmR128Indirect; - -typedef struct { - int idx; - int pitch; - int offset; - int format; - unsigned short x, y; - unsigned short width, height; -} drmR128Blit; - -typedef struct { - enum { - DRM_R128_WRITE_SPAN = 0x01, - DRM_R128_WRITE_PIXELS = 0x02, - DRM_R128_READ_SPAN = 0x03, - DRM_R128_READ_PIXELS = 0x04 - } func; - int n; - int *x; - int *y; - unsigned int *buffer; - unsigned char *mask; -} drmR128Depth; - -typedef struct { - int prim; - int idx; /* Index of vertex buffer */ - int count; /* Number of vertices in buffer */ - int discard; /* Client finished with buffer? */ -} drmR128Vertex; - -typedef struct { - unsigned int *mask; -} drmR128Stipple; - -typedef struct { - unsigned int flags; - unsigned int clear_color; - unsigned int clear_depth; - unsigned int color_mask; - unsigned int depth_mask; -} drmR128Clear; - -typedef struct { - enum { - DRM_R128_INIT_FULLSCREEN = 0x01, - DRM_R128_CLEANUP_FULLSCREEN = 0x02 - } func; -} drmR128Fullscreen; - -typedef struct drm_r128_getparam { - int param; - int *value; -} drmR128GetParam; - -#define R128_PARAM_IRQ_NR 1 - -#endif diff --git a/src/r128_cursor.c b/src/r128_cursor.c deleted file mode 100644 index 5a2ac4f0..00000000 --- a/src/r128_cursor.c +++ /dev/null @@ -1,263 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_cursor.c,v 1.6 2003/02/13 20:28:40 tsi Exp $ */ -/* - * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, - * Precision Insight, Inc., Cedar Park, Texas, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX - * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Rickard E. Faith <faith@valinux.com> - * Kevin E. Martin <martin@valinux.com> - * - * References: - * - * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical - * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April - * 1999. - * - * RAGE 128 Software Development Manual (Technical Reference Manual P/N - * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. - * - */ - - /* Driver data structures */ -#include "r128.h" -#include "r128_reg.h" - - /* X and server generic header files */ -#include "xf86.h" - -#if X_BYTE_ORDER == X_BIG_ENDIAN -#define P_SWAP32( a , b ) \ - ((char *)a)[0] = ((char *)b)[3]; \ - ((char *)a)[1] = ((char *)b)[2]; \ - ((char *)a)[2] = ((char *)b)[1]; \ - ((char *)a)[3] = ((char *)b)[0] - -#define P_SWAP16( a , b ) \ - ((char *)a)[0] = ((char *)b)[1]; \ - ((char *)a)[1] = ((char *)b)[0]; \ - ((char *)a)[2] = ((char *)b)[3]; \ - ((char *)a)[3] = ((char *)b)[2] -#endif - - -/* Set cursor foreground and background colors. */ -static void R128SetCursorColors(ScrnInfoPtr pScrn, int bg, int fg) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - OUTREG(R128_CUR_CLR0, bg); - OUTREG(R128_CUR_CLR1, fg); -} - -/* Set cursor position to (x,y) with offset into cursor bitmap at - (xorigin,yorigin). */ -static void R128SetCursorPosition(ScrnInfoPtr pScrn, int x, int y) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - xf86CursorInfoPtr cursor = info->cursor; - int xorigin = 0; - int yorigin = 0; - int total_y = pScrn->frameY1 - pScrn->frameY0; - - if (x < 0) xorigin = -x; - if (y < 0) yorigin = -y; - if (y > total_y) y = total_y; - if (info->Flags & V_DBLSCAN) y *= 2; - if (xorigin >= cursor->MaxWidth) xorigin = cursor->MaxWidth - 1; - if (yorigin >= cursor->MaxHeight) yorigin = cursor->MaxHeight - 1; - - OUTREG(R128_CUR_HORZ_VERT_OFF, R128_CUR_LOCK | (xorigin << 16) | yorigin); - OUTREG(R128_CUR_HORZ_VERT_POSN, (R128_CUR_LOCK - | ((xorigin ? 0 : x) << 16) - | (yorigin ? 0 : y))); - OUTREG(R128_CUR_OFFSET, info->cursor_start + yorigin * 16); -} - -/* Copy cursor image from `image' to video memory. R128SetCursorPosition - will be called after this, so we can ignore xorigin and yorigin. */ -static void R128LoadCursorImage(ScrnInfoPtr pScrn, unsigned char *image) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - CARD32 *s = (pointer)image; - CARD32 *d = (pointer)(info->FB + info->cursor_start); - int y; - CARD32 save; - - save = INREG(R128_CRTC_GEN_CNTL); - OUTREG(R128_CRTC_GEN_CNTL, save & (CARD32)~R128_CRTC_CUR_EN); - -#if X_BYTE_ORDER == X_BIG_ENDIAN - switch(info->CurrentLayout.pixel_bytes) { - case 4: - case 3: - for (y = 0; y < 64; y++) { - P_SWAP32(d,s); - d++; s++; - P_SWAP32(d,s); - d++; s++; - P_SWAP32(d,s); - d++; s++; - P_SWAP32(d,s); - d++; s++; - } - break; - case 2: - for (y = 0; y < 64; y++) { - P_SWAP16(d,s); - d++; s++; - P_SWAP16(d,s); - d++; s++; - P_SWAP16(d,s); - d++; s++; - P_SWAP16(d,s); - d++; s++; - } - break; - default: - for (y = 0; y < 64; y++) { - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - } - } -#else - for (y = 0; y < 64; y++) { - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - *d++ = *s++; - } -#endif - - /* Set the area after the cursor to be all transparent so that we - won't display corrupted cursors on the screen */ - for (y = 0; y < 64; y++) { - *d++ = 0xffffffff; /* The AND bits */ - *d++ = 0xffffffff; - *d++ = 0x00000000; /* The XOR bits */ - *d++ = 0x00000000; - } - - - OUTREG(R128_CRTC_GEN_CNTL, save); -} - -/* Hide hardware cursor. */ -static void R128HideCursor(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - OUTREGP(R128_CRTC_GEN_CNTL, 0, ~R128_CRTC_CUR_EN); -} - -/* Show hardware cursor. */ -static void R128ShowCursor(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - OUTREGP(R128_CRTC_GEN_CNTL, R128_CRTC_CUR_EN, ~R128_CRTC_CUR_EN); -} - -/* Determine if hardware cursor is in use. */ -static Bool R128UseHWCursor(ScreenPtr pScreen, CursorPtr pCurs) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - R128InfoPtr info = R128PTR(pScrn); - - return info->cursor_start ? TRUE : FALSE; -} - -/* Initialize hardware cursor support. */ -Bool R128CursorInit(ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - R128InfoPtr info = R128PTR(pScrn); - xf86CursorInfoPtr cursor; - FBAreaPtr fbarea; - int width; - int height; - int size; - - - if (!(cursor = info->cursor = xf86CreateCursorInfoRec())) return FALSE; - - cursor->MaxWidth = 64; - cursor->MaxHeight = 64; - cursor->Flags = (HARDWARE_CURSOR_TRUECOLOR_AT_8BPP - | HARDWARE_CURSOR_SHOW_TRANSPARENT - | HARDWARE_CURSOR_UPDATE_UNHIDDEN -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - | HARDWARE_CURSOR_BIT_ORDER_MSBFIRST -#endif - | HARDWARE_CURSOR_INVERT_MASK - | HARDWARE_CURSOR_AND_SOURCE_WITH_MASK - | HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_64 - | HARDWARE_CURSOR_SWAP_SOURCE_AND_MASK); - - cursor->SetCursorColors = R128SetCursorColors; - cursor->SetCursorPosition = R128SetCursorPosition; - cursor->LoadCursorImage = R128LoadCursorImage; - cursor->HideCursor = R128HideCursor; - cursor->ShowCursor = R128ShowCursor; - cursor->UseHWCursor = R128UseHWCursor; - - size = (cursor->MaxWidth/4) * cursor->MaxHeight; - width = pScrn->displayWidth; - height = (size*2 + 1023) / pScrn->displayWidth; - fbarea = xf86AllocateOffscreenArea(pScreen, - width, - height, - 16, - NULL, - NULL, - NULL); - - if (!fbarea) { - info->cursor_start = 0; - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Hardware cursor disabled" - " due to insufficient offscreen memory\n"); - } else { - info->cursor_start = R128_ALIGN((fbarea->box.x1 - + width * fbarea->box.y1) - * info->CurrentLayout.pixel_bytes, 16); - info->cursor_end = info->cursor_start + size; - } - - R128TRACE(("R128CursorInit (0x%08x-0x%08x)\n", - info->cursor_start, info->cursor_end)); - - return xf86InitCursor(pScreen, cursor); -} diff --git a/src/r128_dga.c b/src/r128_dga.c deleted file mode 100644 index 6c0013af..00000000 --- a/src/r128_dga.c +++ /dev/null @@ -1,397 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_dga.c,v 1.9 2002/10/30 12:52:12 alanh Exp $ */ -/* - * Authors: - * Ove Kåven <ovek@transgaming.com>, - * borrowing some code from the Chips and MGA drivers. - */ - - /* Driver data structures */ -#include "r128.h" -#include "r128_probe.h" - - /* X and server generic header files */ -#include "xf86.h" - - /* DGA support */ -#include "dgaproc.h" - -#ifdef XF86DRI -#include "r128_common.h" -#endif - -static Bool R128_OpenFramebuffer(ScrnInfoPtr, char **, unsigned char **, - int *, int *, int *); -static Bool R128_SetMode(ScrnInfoPtr, DGAModePtr); -static int R128_GetViewport(ScrnInfoPtr); -static void R128_SetViewport(ScrnInfoPtr, int, int, int); -static void R128_FillRect(ScrnInfoPtr, int, int, int, int, unsigned long); -static void R128_BlitRect(ScrnInfoPtr, int, int, int, int, int, int); -static void R128_BlitTransRect(ScrnInfoPtr, int, int, int, int, int, int, - unsigned long); - -static DGAModePtr R128SetupDGAMode(ScrnInfoPtr pScrn, - DGAModePtr modes, - int *num, - int bitsPerPixel, - int depth, - Bool pixmap, - int secondPitch, - unsigned long red, - unsigned long green, - unsigned long blue, - short visualClass) -{ - R128InfoPtr info = R128PTR(pScrn); - DGAModePtr newmodes = NULL; - DGAModePtr currentMode; - DisplayModePtr pMode; - DisplayModePtr firstMode; - unsigned int size; - int pitch; - int Bpp = bitsPerPixel >> 3; - -SECOND_PASS: - - pMode = firstMode = pScrn->modes; - - while (1) { - pitch = pScrn->displayWidth; - size = pitch * Bpp * pMode->VDisplay; - - if ((!secondPitch || (pitch != secondPitch)) && - (size <= info->FbMapSize)) { - - if (secondPitch) - pitch = secondPitch; - - if (!(newmodes = xrealloc(modes, (*num + 1) * sizeof(DGAModeRec)))) - break; - - modes = newmodes; - currentMode = modes + *num; - - currentMode->mode = pMode; - currentMode->flags = DGA_CONCURRENT_ACCESS; - - if (pixmap) - currentMode->flags |= DGA_PIXMAP_AVAILABLE; - - if (info->accel) { - if (info->accel->SetupForSolidFill && - info->accel->SubsequentSolidFillRect) - currentMode->flags |= DGA_FILL_RECT; - if (info->accel->SetupForScreenToScreenCopy && - info->accel->SubsequentScreenToScreenCopy) - currentMode->flags |= DGA_BLIT_RECT | DGA_BLIT_RECT_TRANS; - if (currentMode->flags & - (DGA_PIXMAP_AVAILABLE | DGA_FILL_RECT | - DGA_BLIT_RECT | DGA_BLIT_RECT_TRANS)) - currentMode->flags &= ~DGA_CONCURRENT_ACCESS; - } - if (pMode->Flags & V_DBLSCAN) - currentMode->flags |= DGA_DOUBLESCAN; - if (pMode->Flags & V_INTERLACE) - currentMode->flags |= DGA_INTERLACED; - - currentMode->byteOrder = pScrn->imageByteOrder; - currentMode->depth = depth; - currentMode->bitsPerPixel = bitsPerPixel; - currentMode->red_mask = red; - currentMode->green_mask = green; - currentMode->blue_mask = blue; - currentMode->visualClass = visualClass; - currentMode->viewportWidth = pMode->HDisplay; - currentMode->viewportHeight = pMode->VDisplay; - currentMode->xViewportStep = 8; - currentMode->yViewportStep = 1; - currentMode->viewportFlags = DGA_FLIP_RETRACE; - currentMode->offset = 0; - currentMode->address = (unsigned char*)info->LinearAddr; - currentMode->bytesPerScanline = pitch * Bpp; - currentMode->imageWidth = pitch; - currentMode->imageHeight = (info->FbMapSize - / currentMode->bytesPerScanline); - currentMode->pixmapWidth = currentMode->imageWidth; - currentMode->pixmapHeight = currentMode->imageHeight; - currentMode->maxViewportX = (currentMode->imageWidth - - currentMode->viewportWidth); - /* this might need to get clamped to some maximum */ - currentMode->maxViewportY = (currentMode->imageHeight - - currentMode->viewportHeight); - (*num)++; - } - - pMode = pMode->next; - if (pMode == firstMode) - break; - } - - if (secondPitch) { - secondPitch = 0; - goto SECOND_PASS; - } - - return modes; -} - -Bool -R128DGAInit(ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - R128InfoPtr info = R128PTR(pScrn); - DGAModePtr modes = NULL; - int num = 0; - - /* 8 */ - modes = R128SetupDGAMode (pScrn, modes, &num, 8, 8, - (pScrn->bitsPerPixel == 8), - (pScrn->bitsPerPixel != 8) ? 0 : pScrn->displayWidth, - 0, 0, 0, PseudoColor); - - /* 15 */ - modes = R128SetupDGAMode (pScrn, modes, &num, 16, 15, - (pScrn->bitsPerPixel == 16), - (pScrn->depth != 15) ? 0 : pScrn->displayWidth, - 0x7c00, 0x03e0, 0x001f, TrueColor); - - modes = R128SetupDGAMode (pScrn, modes, &num, 16, 15, - (pScrn->bitsPerPixel == 16), - (pScrn->depth != 15) ? 0 : pScrn->displayWidth, - 0x7c00, 0x03e0, 0x001f, DirectColor); - - /* 16 */ - modes = R128SetupDGAMode (pScrn, modes, &num, 16, 16, - (pScrn->bitsPerPixel == 16), - (pScrn->depth != 16) ? 0 : pScrn->displayWidth, - 0xf800, 0x07e0, 0x001f, TrueColor); - - modes = R128SetupDGAMode (pScrn, modes, &num, 16, 16, - (pScrn->bitsPerPixel == 16), - (pScrn->depth != 16) ? 0 : pScrn->displayWidth, - 0xf800, 0x07e0, 0x001f, DirectColor); - - /* 24 */ - modes = R128SetupDGAMode (pScrn, modes, &num, 24, 24, - (pScrn->bitsPerPixel == 24), - (pScrn->bitsPerPixel != 24) ? 0 : pScrn->displayWidth, - 0xff0000, 0x00ff00, 0x0000ff, TrueColor); - - modes = R128SetupDGAMode (pScrn, modes, &num, 24, 24, - (pScrn->bitsPerPixel == 24), - (pScrn->bitsPerPixel != 24) ? 0 : pScrn->displayWidth, - 0xff0000, 0x00ff00, 0x0000ff, DirectColor); - - /* 32 */ - modes = R128SetupDGAMode (pScrn, modes, &num, 32, 24, - (pScrn->bitsPerPixel == 32), - (pScrn->bitsPerPixel != 32) ? 0 : pScrn->displayWidth, - 0xff0000, 0x00ff00, 0x0000ff, TrueColor); - - modes = R128SetupDGAMode (pScrn, modes, &num, 32, 24, - (pScrn->bitsPerPixel == 32), - (pScrn->bitsPerPixel != 32) ? 0 : pScrn->displayWidth, - 0xff0000, 0x00ff00, 0x0000ff, DirectColor); - - info->numDGAModes = num; - info->DGAModes = modes; - - info->DGAFuncs.OpenFramebuffer = R128_OpenFramebuffer; - info->DGAFuncs.CloseFramebuffer = NULL; - info->DGAFuncs.SetMode = R128_SetMode; - info->DGAFuncs.SetViewport = R128_SetViewport; - info->DGAFuncs.GetViewport = R128_GetViewport; - - info->DGAFuncs.Sync = NULL; - info->DGAFuncs.FillRect = NULL; - info->DGAFuncs.BlitRect = NULL; - info->DGAFuncs.BlitTransRect = NULL; - - if (info->accel) { - info->DGAFuncs.Sync = info->accel->Sync; - if (info->accel->SetupForSolidFill && - info->accel->SubsequentSolidFillRect) - info->DGAFuncs.FillRect = R128_FillRect; - if (info->accel->SetupForScreenToScreenCopy && - info->accel->SubsequentScreenToScreenCopy) { - info->DGAFuncs.BlitRect = R128_BlitRect; - info->DGAFuncs.BlitTransRect = R128_BlitTransRect; - } - } - - return DGAInit(pScreen, &(info->DGAFuncs), modes, num); -} - - -static Bool -R128_SetMode( - ScrnInfoPtr pScrn, - DGAModePtr pMode -){ - static R128FBLayout SavedLayouts[MAXSCREENS]; - int indx = pScrn->pScreen->myNum; - R128InfoPtr info = R128PTR(pScrn); - - if(!pMode) { /* restore the original mode */ - /* put the ScreenParameters back */ - if(info->DGAactive) - memcpy(&info->CurrentLayout, &SavedLayouts[indx], sizeof(R128FBLayout)); - - pScrn->currentMode = info->CurrentLayout.mode; - - pScrn->SwitchMode(indx, pScrn->currentMode, 0); -#ifdef XF86DRI - if (info->directRenderingEnabled) { - R128CCE_STOP(pScrn, info); - } -#endif - if (info->accelOn) - R128EngineInit(pScrn); -#ifdef XF86DRI - if (info->directRenderingEnabled) { - R128CCE_START(pScrn, info); - } -#endif - pScrn->AdjustFrame(indx, 0, 0, 0); - info->DGAactive = FALSE; - } else { - if(!info->DGAactive) { /* save the old parameters */ - memcpy(&SavedLayouts[indx], &info->CurrentLayout, sizeof(R128FBLayout)); - info->DGAactive = TRUE; - } - - info->CurrentLayout.bitsPerPixel = pMode->bitsPerPixel; - info->CurrentLayout.depth = pMode->depth; - info->CurrentLayout.displayWidth = pMode->bytesPerScanline / - (pMode->bitsPerPixel >> 3); - info->CurrentLayout.pixel_bytes = pMode->bitsPerPixel / 8; - info->CurrentLayout.pixel_code = (pMode->bitsPerPixel != 16 - ? pMode->bitsPerPixel - : pMode->depth); - /* R128ModeInit() will set the mode field */ - - pScrn->SwitchMode(indx, pMode->mode, 0); - -#ifdef XF86DRI - if (info->directRenderingEnabled) { - R128CCE_STOP(pScrn, info); - } -#endif - if (info->accelOn) - R128EngineInit(pScrn); -#ifdef XF86DRI - if (info->directRenderingEnabled) { - R128CCE_START(pScrn, info); - } -#endif - } - - return TRUE; -} - - - -static int -R128_GetViewport( - ScrnInfoPtr pScrn -){ - R128InfoPtr info = R128PTR(pScrn); - - return info->DGAViewportStatus; -} - - -static void -R128_SetViewport( - ScrnInfoPtr pScrn, - int x, int y, - int flags -){ - R128InfoPtr info = R128PTR(pScrn); - - pScrn->AdjustFrame(pScrn->pScreen->myNum, x, y, flags); - info->DGAViewportStatus = 0; /* FIXME */ -} - - -static void -R128_FillRect ( - ScrnInfoPtr pScrn, - int x, int y, int w, int h, - unsigned long color -){ - R128InfoPtr info = R128PTR(pScrn); - - (*info->accel->SetupForSolidFill)(pScrn, color, GXcopy, (CARD32)(~0)); - (*info->accel->SubsequentSolidFillRect)(pScrn, x, y, w, h); - - if (pScrn->bitsPerPixel == info->CurrentLayout.bitsPerPixel) - SET_SYNC_FLAG(info->accel); -} - -static void -R128_BlitRect( - ScrnInfoPtr pScrn, - int srcx, int srcy, - int w, int h, - int dstx, int dsty -){ - R128InfoPtr info = R128PTR(pScrn); - int xdir = ((srcx < dstx) && (srcy == dsty)) ? -1 : 1; - int ydir = (srcy < dsty) ? -1 : 1; - - (*info->accel->SetupForScreenToScreenCopy)( - pScrn, xdir, ydir, GXcopy, (CARD32)(~0), -1); - (*info->accel->SubsequentScreenToScreenCopy)( - pScrn, srcx, srcy, dstx, dsty, w, h); - - if (pScrn->bitsPerPixel == info->CurrentLayout.bitsPerPixel) - SET_SYNC_FLAG(info->accel); -} - - -static void -R128_BlitTransRect( - ScrnInfoPtr pScrn, - int srcx, int srcy, - int w, int h, - int dstx, int dsty, - unsigned long color -){ - R128InfoPtr info = R128PTR(pScrn); - int xdir = ((srcx < dstx) && (srcy == dsty)) ? -1 : 1; - int ydir = (srcy < dsty) ? -1 : 1; - - info->XAAForceTransBlit = TRUE; - - (*info->accel->SetupForScreenToScreenCopy)( - pScrn, xdir, ydir, GXcopy, (CARD32)(~0), color); - - info->XAAForceTransBlit = FALSE; - - (*info->accel->SubsequentScreenToScreenCopy)( - pScrn, srcx, srcy, dstx, dsty, w, h); - - if (pScrn->bitsPerPixel == info->CurrentLayout.bitsPerPixel) - SET_SYNC_FLAG(info->accel); -} - - -static Bool -R128_OpenFramebuffer( - ScrnInfoPtr pScrn, - char **name, - unsigned char **mem, - int *size, - int *offset, - int *flags -){ - R128InfoPtr info = R128PTR(pScrn); - - *name = NULL; /* no special device */ - *mem = (unsigned char*)info->LinearAddr; - *size = info->FbMapSize; - *offset = 0; - *flags = /* DGA_NEED_ROOT */ 0; /* don't need root, just /dev/mem access */ - - return TRUE; -} diff --git a/src/r128_dri.c b/src/r128_dri.c index ef2f9daa..9bb9668f 100644 --- a/src/r128_dri.c +++ b/src/r128_dri.c @@ -56,15 +56,7 @@ #include "GL/glxtokens.h" #include "sarea.h" -/* ?? HACK - for now, put this here... */ -/* ?? Alpha - this may need to be a variable to handle UP1x00 vs TITAN */ -#if defined(__alpha__) -# define DRM_PAGE_SIZE 8192 -#elif defined(__ia64__) -# define DRM_PAGE_SIZE getpagesize() -#else -# define DRM_PAGE_SIZE 4096 -#endif +static size_t r128_drm_page_size; static void R128DRITransitionTo2d(ScreenPtr pScreen); static void R128DRITransitionTo3d(ScreenPtr pScreen); @@ -502,11 +494,11 @@ static Bool R128DRIAgpInit(R128InfoPtr info, ScreenPtr pScreen) /* Initialize the CCE ring buffer data */ info->ringStart = info->agpOffset; - info->ringMapSize = info->ringSize*1024*1024 + DRM_PAGE_SIZE; + info->ringMapSize = info->ringSize*1024*1024 + r128_drm_page_size; info->ringSizeLog2QW = R128MinBits(info->ringSize*1024*1024/8) - 1; info->ringReadOffset = info->ringStart + info->ringMapSize; - info->ringReadMapSize = DRM_PAGE_SIZE; + info->ringReadMapSize = r128_drm_page_size; /* Reserve space for vertex/indirect buffers */ info->bufStart = info->ringReadOffset + info->ringReadMapSize; @@ -655,11 +647,11 @@ static Bool R128DRIPciInit(R128InfoPtr info, ScreenPtr pScreen) /* Initialize the CCE ring buffer data */ info->ringStart = info->agpOffset; - info->ringMapSize = info->ringSize*1024*1024 + DRM_PAGE_SIZE; + info->ringMapSize = info->ringSize*1024*1024 + r128_drm_page_size; info->ringSizeLog2QW = R128MinBits(info->ringSize*1024*1024/8) - 1; info->ringReadOffset = info->ringStart + info->ringMapSize; - info->ringReadMapSize = DRM_PAGE_SIZE; + info->ringReadMapSize = r128_drm_page_size; /* Reserve space for vertex/indirect buffers */ info->bufStart = info->ringReadOffset + info->ringReadMapSize; @@ -1016,6 +1008,8 @@ Bool R128DRIScreenInit(ScreenPtr pScreen) break; } + r128_drm_page_size = getpagesize(); + /* Create the DRI data structure, and fill it in before calling the DRIScreenInit(). */ if (!(pDRIInfo = DRICreateInfoRec())) return FALSE; diff --git a/src/r128_dri.h b/src/r128_dri.h deleted file mode 100644 index c3ab2759..00000000 --- a/src/r128_dri.h +++ /dev/null @@ -1,101 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_dri.h,v 1.7 2002/10/30 12:52:12 alanh Exp $ */ -/* - * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, - * Precision Insight, Inc., Cedar Park, Texas, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX - * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@valinux.com> - * Rickard E. Faith <faith@valinux.com> - * Gareth Hughes <gareth@valinux.com> - * - */ - -#ifndef _R128_DRI_ -#define _R128_DRI_ - -#include "xf86drm.h" - -/* DRI Driver defaults */ -#define R128_DEFAULT_CCE_PIO_MODE R128_PM4_64PIO_64VCBM_64INDBM -#define R128_DEFAULT_CCE_BM_MODE R128_PM4_64BM_64VCBM_64INDBM -#define R128_DEFAULT_AGP_MODE 1 -#define R128_DEFAULT_AGP_SIZE 8 /* MB (must be a power of 2 and > 4MB) */ -#define R128_DEFAULT_RING_SIZE 1 /* MB (must be page aligned) */ -#define R128_DEFAULT_BUFFER_SIZE 2 /* MB (must be page aligned) */ -#define R128_DEFAULT_AGP_TEX_SIZE 1 /* MB (must be page aligned) */ - -#define R128_DEFAULT_CCE_TIMEOUT 10000 /* usecs */ - -#define R128_AGP_MAX_MODE 4 - -#define R128_CARD_TYPE_R128 1 -#define R128_CARD_TYPE_R128_PRO 2 -#define R128_CARD_TYPE_R128_MOBILITY 3 - -#define R128CCE_USE_RING_BUFFER(m) \ -(((m) == R128_PM4_192BM) || \ - ((m) == R128_PM4_128BM_64INDBM) || \ - ((m) == R128_PM4_64BM_128INDBM) || \ - ((m) == R128_PM4_64BM_64VCBM_64INDBM)) - -typedef struct { - /* DRI screen private data */ - int deviceID; /* PCI device ID */ - int width; /* Width in pixels of display */ - int height; /* Height in scanlines of display */ - int depth; /* Depth of display (8, 15, 16, 24) */ - int bpp; /* Bit depth of display (8, 16, 24, 32) */ - - int IsPCI; /* Current card is a PCI card */ - int AGPMode; - - int frontOffset; /* Start of front buffer */ - int frontPitch; - int backOffset; /* Start of shared back buffer */ - int backPitch; - int depthOffset; /* Start of shared depth buffer */ - int depthPitch; - int spanOffset; /* Start of scratch spanline */ - int textureOffset;/* Start of texture data in frame buffer */ - int textureSize; - int log2TexGran; - - /* MMIO register data */ - drm_handle_t registerHandle; - drmSize registerSize; - - /* CCE AGP Texture data */ - drm_handle_t agpTexHandle; - drmSize agpTexMapSize; - int log2AGPTexGran; - int agpTexOffset; - unsigned int sarea_priv_offset; -} R128DRIRec, *R128DRIPtr; - -#endif diff --git a/src/r128_dripriv.h b/src/r128_dripriv.h deleted file mode 100644 index 7f849879..00000000 --- a/src/r128_dripriv.h +++ /dev/null @@ -1,58 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_dripriv.h,v 1.3 2000/11/18 19:37:11 tsi Exp $ */ -/* - * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, - * Precision Insight, Inc., Cedar Park, Texas, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX - * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Rickard E. Faith <faith@valinux.com> - * Kevin E. Martin <martin@valinux.com> - * - */ - -#ifndef _R128_DRIPRIV_H_ -#define _R128_DRIPRIV_H_ - -#include "GL/glxint.h" - -#define R128_MAX_DRAWABLES 256 - -extern void GlxSetVisualConfigs(int nconfigs, __GLXvisualConfig *configs, - void **configprivs); - -typedef struct { - /* Nothing here yet */ - int dummy; -} R128ConfigPrivRec, *R128ConfigPrivPtr; - -typedef struct { - /* Nothing here yet */ - int dummy; -} R128DRIContextRec, *R128DRIContextPtr; - -#endif diff --git a/src/r128_driver.c b/src/r128_driver.c deleted file mode 100644 index d990610c..00000000 --- a/src/r128_driver.c +++ /dev/null @@ -1,3676 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_driver.c,v 1.79 2003/08/23 15:02:54 dawes Exp $ */ -/* - * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, - * Precision Insight, Inc., Cedar Park, Texas, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX - * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Rickard E. Faith <faith@valinux.com> - * Kevin E. Martin <martin@valinux.com> - * Gareth Hughes <gareth@valinux.com> - * - * Credits: - * - * Thanks to Alan Hourihane <alanh@fairlite.demon..co.uk> and SuSE for - * providing source code to their 3.3.x Rage 128 driver. Portions of - * this file are based on the initialization code for that driver. - * - * References: - * - * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical - * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April - * 1999. - * - * RAGE 128 Software Development Manual (Technical Reference Manual P/N - * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. - * - * This server does not yet support these XFree86 4.0 features: - * DDC1 & DDC2 - * shadowfb - * overlay planes - * - * Modified by Marc Aurele La France <tsi@xfree86.org> for ATI driver merge. - */ - - - /* Driver data structures */ -#include "r128.h" -#include "r128_probe.h" -#include "r128_reg.h" -#include "r128_version.h" - -#ifdef XF86DRI -#define _XF86DRI_SERVER_ -#include "r128_dri.h" -#include "r128_common.h" -#include "r128_sarea.h" -#endif - -#include "fb.h" - - /* colormap initialization */ -#include "micmap.h" - - /* X and server generic header files */ -#include "xf86.h" -#include "xf86_OSproc.h" -#include "xf86PciInfo.h" -#include "xf86RAC.h" -#include "xf86Resources.h" -#include "xf86cmap.h" -#include "xf86xv.h" -#include "vbe.h" - - /* fbdevhw & vgahw */ -#include "fbdevhw.h" -#include "vgaHW.h" -#include "dixstruct.h" - -#ifndef MAX -#define MAX(a,b) ((a)>(b)?(a):(b)) -#endif - -#define USE_CRT_ONLY 0 - - /* Forward definitions for driver functions */ -static Bool R128CloseScreen(int scrnIndex, ScreenPtr pScreen); -static Bool R128SaveScreen(ScreenPtr pScreen, int mode); -static void R128Save(ScrnInfoPtr pScrn); -static void R128Restore(ScrnInfoPtr pScrn); -static Bool R128ModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode); -static void R128DisplayPowerManagementSet(ScrnInfoPtr pScrn, - int PowerManagementMode, int flags); -static void R128DisplayPowerManagementSetLCD(ScrnInfoPtr pScrn, - int PowerManagementMode, int flags); - -typedef enum { - OPTION_NOACCEL, - OPTION_SW_CURSOR, - OPTION_DAC_6BIT, - OPTION_DAC_8BIT, -#ifdef XF86DRI - OPTION_XV_DMA, - OPTION_IS_PCI, - OPTION_CCE_PIO, - OPTION_NO_SECURITY, - OPTION_USEC_TIMEOUT, - OPTION_AGP_MODE, - OPTION_AGP_SIZE, - OPTION_RING_SIZE, - OPTION_BUFFER_SIZE, - OPTION_PAGE_FLIP, -#endif -#if USE_CRT_ONLY - /* FIXME: Disable CRTOnly until it is tested */ - OPTION_CRT, -#endif - OPTION_DISPLAY, - OPTION_PANEL_WIDTH, - OPTION_PANEL_HEIGHT, - OPTION_PROG_FP_REGS, - OPTION_FBDEV, - OPTION_VIDEO_KEY, - OPTION_SHOW_CACHE -} R128Opts; - -const OptionInfoRec R128Options[] = { - { OPTION_NOACCEL, "NoAccel", OPTV_BOOLEAN, {0}, FALSE }, - { OPTION_SW_CURSOR, "SWcursor", OPTV_BOOLEAN, {0}, FALSE }, - { OPTION_DAC_6BIT, "Dac6Bit", OPTV_BOOLEAN, {0}, FALSE }, - { OPTION_DAC_8BIT, "Dac8Bit", OPTV_BOOLEAN, {0}, TRUE }, -#ifdef XF86DRI - { OPTION_XV_DMA, "DMAForXv", OPTV_BOOLEAN, {0}, FALSE }, - { OPTION_IS_PCI, "ForcePCIMode", OPTV_BOOLEAN, {0}, FALSE }, - { OPTION_CCE_PIO, "CCEPIOMode", OPTV_BOOLEAN, {0}, FALSE }, - { OPTION_NO_SECURITY, "CCENoSecurity", OPTV_BOOLEAN, {0}, FALSE }, - { OPTION_USEC_TIMEOUT, "CCEusecTimeout", OPTV_INTEGER, {0}, FALSE }, - { OPTION_AGP_MODE, "AGPMode", OPTV_INTEGER, {0}, FALSE }, - { OPTION_AGP_SIZE, "AGPSize", OPTV_INTEGER, {0}, FALSE }, - { OPTION_RING_SIZE, "RingSize", OPTV_INTEGER, {0}, FALSE }, - { OPTION_BUFFER_SIZE, "BufferSize", OPTV_INTEGER, {0}, FALSE }, - { OPTION_PAGE_FLIP, "EnablePageFlip", OPTV_BOOLEAN, {0}, FALSE }, -#endif - { OPTION_DISPLAY, "Display", OPTV_STRING, {0}, FALSE }, - { OPTION_PANEL_WIDTH, "PanelWidth", OPTV_INTEGER, {0}, FALSE }, - { OPTION_PANEL_HEIGHT, "PanelHeight", OPTV_INTEGER, {0}, FALSE }, - { OPTION_PROG_FP_REGS, "ProgramFPRegs", OPTV_BOOLEAN, {0}, FALSE }, - { OPTION_FBDEV, "UseFBDev", OPTV_BOOLEAN, {0}, FALSE }, - { OPTION_VIDEO_KEY, "VideoKey", OPTV_INTEGER, {0}, FALSE }, - { OPTION_SHOW_CACHE, "ShowCache", OPTV_BOOLEAN, {0}, FALSE }, - { -1, NULL, OPTV_NONE, {0}, FALSE } -}; - -R128RAMRec R128RAM[] = { /* Memory Specifications - From RAGE 128 Software Development - Manual (Technical Reference Manual P/N - SDK-G04000 Rev 0.01), page 3-21. */ - { 4, 4, 3, 3, 1, 3, 1, 16, 12, "128-bit SDR SGRAM 1:1" }, - { 4, 8, 3, 3, 1, 3, 1, 17, 13, "64-bit SDR SGRAM 1:1" }, - { 4, 4, 1, 2, 1, 2, 1, 16, 12, "64-bit SDR SGRAM 2:1" }, - { 4, 4, 3, 3, 2, 3, 1, 16, 12, "64-bit DDR SGRAM" }, -}; - -static const char *vgahwSymbols[] = { - "vgaHWFreeHWRec", - "vgaHWGetHWRec", - "vgaHWGetIndex", - "vgaHWLock", - "vgaHWRestore", - "vgaHWSave", - "vgaHWUnlock", - NULL -}; - -static const char *fbdevHWSymbols[] = { - "fbdevHWInit", - "fbdevHWUseBuildinMode", - "fbdevHWGetLineLength", - "fbdevHWGetVidmem", - - "fbdevHWDPMSSet", - - /* colormap */ - "fbdevHWLoadPalette", - - /* ScrnInfo hooks */ - "fbdevHWAdjustFrame", - "fbdevHWEnterVT", - "fbdevHWLeaveVT", - "fbdevHWModeInit", - "fbdevHWRestore", - "fbdevHWSave", - "fbdevHWSwitchMode", - "fbdevHWValidMode", - - "fbdevHWMapMMIO", - "fbdevHWMapVidmem", - "fbdevHWUnmapMMIO", - "fbdevHWUnmapVidmem", - - NULL -}; - -static const char *ddcSymbols[] = { - "xf86PrintEDID", - "xf86DoEDID_DDC1", - "xf86DoEDID_DDC2", - NULL -}; - -static const char *i2cSymbols[] = { - "xf86CreateI2CBusRec", - "xf86I2CBusInit", - NULL -}; - -static const char *fbSymbols[] = { - "fbPictureInit", - "fbScreenInit", - NULL -}; - -static const char *xaaSymbols[] = { - "XAACreateInfoRec", - "XAADestroyInfoRec", - "XAAInit", - NULL -}; - -static const char *ramdacSymbols[] = { - "xf86CreateCursorInfoRec", - "xf86DestroyCursorInfoRec", - "xf86InitCursor", - NULL -}; - -#ifdef XF86DRI -static const char *drmSymbols[] = { - "drmAddBufs", - "drmAddMap", - "drmAgpAcquire", - "drmAgpAlloc", - "drmAgpBase", - "drmAgpBind", - "drmAgpDeviceId", - "drmAgpEnable", - "drmAgpFree", - "drmAgpGetMode", - "drmAgpRelease", - "drmAgpUnbind", - "drmAgpVendorId", - "drmAvailable", - "drmCommandNone", - "drmCommandRead", - "drmCommandWrite", - "drmCommandWriteRead", - "drmCtlInstHandler", - "drmCtlUninstHandler", - "drmFreeBufs", - "drmFreeVersion", - "drmGetInterruptFromBusID", - "drmGetLibVersion", - "drmGetVersion", - "drmMap", - "drmMapBufs", - "drmDMA", - "drmScatterGatherAlloc", - "drmScatterGatherFree", - "drmUnmap", - "drmUnmapBufs", - NULL -}; - -static const char *driSymbols[] = { - "DRICloseScreen", - "DRICreateInfoRec", - "DRIDestroyInfoRec", - "DRIFinishScreenInit", - "DRIGetDeviceInfo", - "DRIGetSAREAPrivate", - "DRILock", - "DRIQueryVersion", - "DRIScreenInit", - "DRIUnlock", - "GlxSetVisualConfigs", - "DRICreatePCIBusID", - NULL -}; - -static const char *driShadowFBSymbols[] = { - "ShadowFBInit", - NULL -}; -#endif - -static const char *vbeSymbols[] = { - "VBEInit", - "vbeDoEDID", - "vbeFree", - NULL -}; - -static const char *int10Symbols[] = { - "xf86InitInt10", - "xf86FreeInt10", - "xf86int10Addr", - NULL -}; - -void R128LoaderRefSymLists(void) -{ - /* - * Tell the loader about symbols from other modules that this module might - * refer to. - */ - xf86LoaderRefSymLists(vgahwSymbols, - fbSymbols, - xaaSymbols, - ramdacSymbols, -#ifdef XF86DRI - drmSymbols, - driSymbols, - driShadowFBSymbols, -#endif - fbdevHWSymbols, - int10Symbols, - vbeSymbols, - /* ddcsymbols, */ - i2cSymbols, - /* shadowSymbols, */ - NULL); -} - -/* Allocate our private R128InfoRec. */ -static Bool R128GetRec(ScrnInfoPtr pScrn) -{ - if (pScrn->driverPrivate) return TRUE; - - pScrn->driverPrivate = xnfcalloc(sizeof(R128InfoRec), 1); - return TRUE; -} - -/* Free our private R128InfoRec. */ -static void R128FreeRec(ScrnInfoPtr pScrn) -{ - if (!pScrn || !pScrn->driverPrivate) return; - xfree(pScrn->driverPrivate); - pScrn->driverPrivate = NULL; -} - -/* Memory map the MMIO region. Used during pre-init and by R128MapMem, - below. */ -static Bool R128MapMMIO(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - - if (info->FBDev) { - info->MMIO = fbdevHWMapMMIO(pScrn); - } else { - info->MMIO = xf86MapPciMem(pScrn->scrnIndex, - VIDMEM_MMIO | VIDMEM_READSIDEEFFECT, - info->PciTag, - info->MMIOAddr, - R128_MMIOSIZE); - } - - if (!info->MMIO) return FALSE; - return TRUE; -} - -/* Unmap the MMIO region. Used during pre-init and by R128UnmapMem, - below. */ -static Bool R128UnmapMMIO(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - - if (info->FBDev) - fbdevHWUnmapMMIO(pScrn); - else { - xf86UnMapVidMem(pScrn->scrnIndex, info->MMIO, R128_MMIOSIZE); - } - info->MMIO = NULL; - return TRUE; -} - -/* Memory map the frame buffer. Used by R128MapMem, below. */ -static Bool R128MapFB(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - - if (info->FBDev) { - info->FB = fbdevHWMapVidmem(pScrn); - } else { - info->FB = xf86MapPciMem(pScrn->scrnIndex, - VIDMEM_FRAMEBUFFER, - info->PciTag, - info->LinearAddr, - info->FbMapSize); - } - - if (!info->FB) return FALSE; - return TRUE; -} - -/* Unmap the frame buffer. Used by R128UnmapMem, below. */ -static Bool R128UnmapFB(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - - if (info->FBDev) - fbdevHWUnmapVidmem(pScrn); - else - xf86UnMapVidMem(pScrn->scrnIndex, info->FB, info->FbMapSize); - info->FB = NULL; - return TRUE; -} - -/* Memory map the MMIO region and the frame buffer. */ -static Bool R128MapMem(ScrnInfoPtr pScrn) -{ - if (!R128MapMMIO(pScrn)) return FALSE; - if (!R128MapFB(pScrn)) { - R128UnmapMMIO(pScrn); - return FALSE; - } - return TRUE; -} - -/* Unmap the MMIO region and the frame buffer. */ -static Bool R128UnmapMem(ScrnInfoPtr pScrn) -{ - if (!R128UnmapMMIO(pScrn) || !R128UnmapFB(pScrn)) return FALSE; - return TRUE; -} - -/* Read PLL information */ -unsigned R128INPLL(ScrnInfoPtr pScrn, int addr) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - OUTREG8(R128_CLOCK_CNTL_INDEX, addr & 0x1f); - return INREG(R128_CLOCK_CNTL_DATA); -} - -#if 0 -/* Read PAL information (only used for debugging). */ -static int R128INPAL(int idx) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - OUTREG(R128_PALETTE_INDEX, idx << 16); - return INREG(R128_PALETTE_DATA); -} -#endif - -/* Wait for vertical sync. */ -void R128WaitForVerticalSync(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int i; - - OUTREG(R128_GEN_INT_STATUS, R128_VSYNC_INT_AK); - for (i = 0; i < R128_TIMEOUT; i++) { - if (INREG(R128_GEN_INT_STATUS) & R128_VSYNC_INT) break; - } -} - -/* Blank screen. */ -static void R128Blank(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - if(info->isDFP) - OUTREGP(R128_FP_GEN_CNTL, R128_FP_BLANK_DIS, ~R128_FP_BLANK_DIS); - else - OUTREGP(R128_CRTC_EXT_CNTL, R128_CRTC_DISPLAY_DIS, ~R128_CRTC_DISPLAY_DIS); -} - -/* Unblank screen. */ -static void R128Unblank(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - if(info->isDFP) - OUTREGP(R128_FP_GEN_CNTL, 0, ~R128_FP_BLANK_DIS); - else - OUTREGP(R128_CRTC_EXT_CNTL, 0, ~R128_CRTC_DISPLAY_DIS); -} - -/* Compute log base 2 of val. */ -int R128MinBits(int val) -{ - int bits; - - if (!val) return 1; - for (bits = 0; val; val >>= 1, ++bits); - return bits; -} - -/* Compute n/d with rounding. */ -static int R128Div(int n, int d) -{ - return (n + (d / 2)) / d; -} - -/* Read the Video BIOS block and the FP registers (if applicable). */ -static Bool R128GetBIOSParameters(ScrnInfoPtr pScrn, xf86Int10InfoPtr pInt10) -{ - R128InfoPtr info = R128PTR(pScrn); - int i; - int FPHeader = 0; - -#define R128_BIOS8(v) (info->VBIOS[v]) -#define R128_BIOS16(v) (info->VBIOS[v] | \ - (info->VBIOS[(v) + 1] << 8)) -#define R128_BIOS32(v) (info->VBIOS[v] | \ - (info->VBIOS[(v) + 1] << 8) | \ - (info->VBIOS[(v) + 2] << 16) | \ - (info->VBIOS[(v) + 3] << 24)) - - if (!(info->VBIOS = xalloc(R128_VBIOS_SIZE))) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Cannot allocate space for hold Video BIOS!\n"); - return FALSE; - } - - if (pInt10) { - info->BIOSAddr = pInt10->BIOSseg << 4; - (void)memcpy(info->VBIOS, xf86int10Addr(pInt10, info->BIOSAddr), - R128_VBIOS_SIZE); - } else { - xf86ReadPciBIOS(0, info->PciTag, 0, info->VBIOS, R128_VBIOS_SIZE); - if (info->VBIOS[0] != 0x55 || info->VBIOS[1] != 0xaa) { - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Video BIOS not detected in PCI space!\n"); - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Attempting to read Video BIOS from legacy ISA space!\n"); - info->BIOSAddr = 0x000c0000; - xf86ReadDomainMemory(info->PciTag, info->BIOSAddr, R128_VBIOS_SIZE, info->VBIOS); - } - } - if (info->VBIOS[0] != 0x55 || info->VBIOS[1] != 0xaa) { - info->BIOSAddr = 0x00000000; - xfree(info->VBIOS); - info->VBIOS = NULL; - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Video BIOS not found!\n"); - } - - if (info->VBIOS && info->HasPanelRegs) { - info->FPBIOSstart = 0; - - /* FIXME: There should be direct access to the start of the FP info - tables, but until we find out where that offset is stored, we - must search for the ATI signature string: "M3 ". */ - for (i = 4; i < R128_VBIOS_SIZE-8; i++) { - if (R128_BIOS8(i) == 'M' && - R128_BIOS8(i+1) == '3' && - R128_BIOS8(i+2) == ' ' && - R128_BIOS8(i+3) == ' ' && - R128_BIOS8(i+4) == ' ' && - R128_BIOS8(i+5) == ' ' && - R128_BIOS8(i+6) == ' ' && - R128_BIOS8(i+7) == ' ') { - FPHeader = i-2; - break; - } - } - - if (!FPHeader) return TRUE; - - /* Assume that only one panel is attached and supported */ - for (i = FPHeader+20; i < FPHeader+84; i += 2) { - if (R128_BIOS16(i) != 0) { - info->FPBIOSstart = R128_BIOS16(i); - break; - } - } - if (!info->FPBIOSstart) return TRUE; - - if (!info->PanelXRes) - info->PanelXRes = R128_BIOS16(info->FPBIOSstart+25); - if (!info->PanelYRes) - info->PanelYRes = R128_BIOS16(info->FPBIOSstart+27); - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Panel size: %dx%d\n", - info->PanelXRes, info->PanelYRes); - - info->PanelPwrDly = R128_BIOS8(info->FPBIOSstart+56); - - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Panel ID: "); - for (i = 1; i <= 24; i++) - ErrorF("%c", R128_BIOS8(info->FPBIOSstart+i)); - ErrorF("\n"); - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Panel Type: "); - i = R128_BIOS16(info->FPBIOSstart+29); - if (i & 1) ErrorF("Color, "); - else ErrorF("Monochrome, "); - if (i & 2) ErrorF("Dual(split), "); - else ErrorF("Single, "); - switch ((i >> 2) & 0x3f) { - case 0: ErrorF("STN"); break; - case 1: ErrorF("TFT"); break; - case 2: ErrorF("Active STN"); break; - case 3: ErrorF("EL"); break; - case 4: ErrorF("Plasma"); break; - default: ErrorF("UNKNOWN"); break; - } - ErrorF("\n"); - if (R128_BIOS8(info->FPBIOSstart+61) & 1) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Panel Interface: LVDS\n"); - } else { - /* FIXME: Add Non-LVDS flat pael support */ - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Non-LVDS panel interface detected! " - "This support is untested and may not " - "function properly\n"); - } - } - - if (!info->PanelXRes || !info->PanelYRes) { - info->HasPanelRegs = FALSE; - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Can't determine panel dimensions, and none specified. \ - Disabling programming of FP registers.\n"); - } - - return TRUE; -} - -/* Read PLL parameters from BIOS block. Default to typical values if there - is no BIOS. */ -static Bool R128GetPLLParameters(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - R128PLLPtr pll = &info->pll; - -#if defined(__powerpc__) || defined(__alpha__) - /* there is no bios under Linux PowerPC but Open Firmware - does set up the PLL registers properly and we can use - those to calculate xclk and find the reference divider */ - - unsigned x_mpll_ref_fb_div; - unsigned xclk_cntl; - unsigned Nx, M; - unsigned PostDivSet[] = {0, 1, 2, 4, 8, 3, 6, 12}; - - /* Assume REF clock is 2950 (in units of 10khz) */ - /* and that all pllclk must be between 125 Mhz and 250Mhz */ - pll->reference_freq = 2950; - pll->min_pll_freq = 12500; - pll->max_pll_freq = 25000; - - /* need to memory map the io to use INPLL since it - has not been done yet at this point in the startup */ - R128MapMMIO(pScrn); - x_mpll_ref_fb_div = INPLL(pScrn, R128_X_MPLL_REF_FB_DIV); - xclk_cntl = INPLL(pScrn, R128_XCLK_CNTL) & 0x7; - pll->reference_div = - INPLL(pScrn,R128_PPLL_REF_DIV) & R128_PPLL_REF_DIV_MASK; - /* unmap it again */ - R128UnmapMMIO(pScrn); - - Nx = (x_mpll_ref_fb_div & 0x00FF00) >> 8; - M = (x_mpll_ref_fb_div & 0x0000FF); - - pll->xclk = R128Div((2 * Nx * pll->reference_freq), - (M * PostDivSet[xclk_cntl])); - -#else /* !defined(__powerpc__) */ - - if (!info->VBIOS) { - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Video BIOS not detected, using default PLL parameters!\n"); - /* These probably aren't going to work for - the card you are using. Specifically, - reference freq can be 29.50MHz, - 28.63MHz, or 14.32MHz. YMMV. */ - pll->reference_freq = 2950; - pll->reference_div = 65; - pll->min_pll_freq = 12500; - pll->max_pll_freq = 25000; - pll->xclk = 10300; - } else { - CARD16 bios_header = R128_BIOS16(0x48); - CARD16 pll_info_block = R128_BIOS16(bios_header + 0x30); - R128TRACE(("Header at 0x%04x; PLL Information at 0x%04x\n", - bios_header, pll_info_block)); - - pll->reference_freq = R128_BIOS16(pll_info_block + 0x0e); - pll->reference_div = R128_BIOS16(pll_info_block + 0x10); - pll->min_pll_freq = R128_BIOS32(pll_info_block + 0x12); - pll->max_pll_freq = R128_BIOS32(pll_info_block + 0x16); - pll->xclk = R128_BIOS16(pll_info_block + 0x08); - } -#endif /* __powerpc__ */ - - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "PLL parameters: rf=%d rd=%d min=%d max=%d; xclk=%d\n", - pll->reference_freq, - pll->reference_div, - pll->min_pll_freq, - pll->max_pll_freq, - pll->xclk); - - return TRUE; -} - -/* This is called by R128PreInit to set up the default visual. */ -static Bool R128PreInitVisual(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - - if (!xf86SetDepthBpp(pScrn, 0, 0, 0, (Support24bppFb - | Support32bppFb - | SupportConvert32to24 - ))) - return FALSE; - - switch (pScrn->depth) { - case 8: - case 15: - case 16: - case 24: - break; - default: - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Given depth (%d) is not supported by %s driver\n", - pScrn->depth, R128_DRIVER_NAME); - return FALSE; - } - - xf86PrintDepthBpp(pScrn); - - info->fifo_slots = 0; - info->pix24bpp = xf86GetBppFromDepth(pScrn, pScrn->depth); - info->CurrentLayout.bitsPerPixel = pScrn->bitsPerPixel; - info->CurrentLayout.depth = pScrn->depth; - info->CurrentLayout.pixel_bytes = pScrn->bitsPerPixel / 8; - info->CurrentLayout.pixel_code = (pScrn->bitsPerPixel != 16 - ? pScrn->bitsPerPixel - : pScrn->depth); - - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Pixel depth = %d bits stored in %d byte%s (%d bpp pixmaps)\n", - pScrn->depth, - info->CurrentLayout.pixel_bytes, - info->CurrentLayout.pixel_bytes > 1 ? "s" : "", - info->pix24bpp); - - - if (!xf86SetDefaultVisual(pScrn, -1)) return FALSE; - - if (pScrn->depth > 8 && pScrn->defaultVisual != TrueColor) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Default visual (%s) is not supported at depth %d\n", - xf86GetVisualName(pScrn->defaultVisual), pScrn->depth); - return FALSE; - } - return TRUE; - -} - -/* This is called by R128PreInit to handle all color weight issues. */ -static Bool R128PreInitWeight(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - - /* Save flag for 6 bit DAC to use for - setting CRTC registers. Otherwise use - an 8 bit DAC, even if xf86SetWeight sets - pScrn->rgbBits to some value other than - 8. */ - info->dac6bits = FALSE; - if (pScrn->depth > 8) { - rgb defaultWeight = { 0, 0, 0 }; - if (!xf86SetWeight(pScrn, defaultWeight, defaultWeight)) return FALSE; - } else { - pScrn->rgbBits = 8; - if (xf86ReturnOptValBool(info->Options, OPTION_DAC_6BIT, FALSE)) { - pScrn->rgbBits = 6; - info->dac6bits = TRUE; - } - } - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Using %d bits per RGB (%d bit DAC)\n", - pScrn->rgbBits, info->dac6bits ? 6 : 8); - - return TRUE; - -} - -/* This is called by R128PreInit to handle config file overrides for things - like chipset and memory regions. Also determine memory size and type. - If memory type ever needs an override, put it in this routine. */ -static Bool R128PreInitConfig(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - EntityInfoPtr pEnt = info->pEnt; - GDevPtr dev = pEnt->device; - int offset = 0; /* RAM Type */ - MessageType from; - - /* Chipset */ - from = X_PROBED; - if (dev->chipset && *dev->chipset) { - info->Chipset = xf86StringToToken(R128Chipsets, dev->chipset); - from = X_CONFIG; - } else if (dev->chipID >= 0) { - info->Chipset = dev->chipID; - from = X_CONFIG; - } else { - info->Chipset = info->PciInfo->chipType; - } - pScrn->chipset = (char *)xf86TokenToString(R128Chipsets, info->Chipset); - - if (!pScrn->chipset) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "ChipID 0x%04x is not recognized\n", info->Chipset); - return FALSE; - } - - if (info->Chipset < 0) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Chipset \"%s\" is not recognized\n", pScrn->chipset); - return FALSE; - } - - xf86DrvMsg(pScrn->scrnIndex, from, - "Chipset: \"%s\" (ChipID = 0x%04x)\n", - pScrn->chipset, - info->Chipset); - - /* Framebuffer */ - - from = X_PROBED; - info->LinearAddr = info->PciInfo->memBase[0] & 0xfc000000; - pScrn->memPhysBase = info->LinearAddr; - if (dev->MemBase) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Linear address override, using 0x%08x instead of 0x%08x\n", - dev->MemBase, - info->LinearAddr); - info->LinearAddr = dev->MemBase; - from = X_CONFIG; - } else if (!info->LinearAddr) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "No valid linear framebuffer address\n"); - return FALSE; - } - xf86DrvMsg(pScrn->scrnIndex, from, - "Linear framebuffer at 0x%08lx\n", info->LinearAddr); - - /* MMIO registers */ - from = X_PROBED; - info->MMIOAddr = info->PciInfo->memBase[2] & 0xffffff00; - if (dev->IOBase) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "MMIO address override, using 0x%08x instead of 0x%08x\n", - dev->IOBase, - info->MMIOAddr); - info->MMIOAddr = dev->IOBase; - from = X_CONFIG; - } else if (!info->MMIOAddr) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid MMIO address\n"); - return FALSE; - } - xf86DrvMsg(pScrn->scrnIndex, from, - "MMIO registers at 0x%08lx\n", info->MMIOAddr); - - /* BIOS */ - from = X_PROBED; - info->BIOSAddr = info->PciInfo->biosBase & 0xfffe0000; - if (dev->BiosBase) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "BIOS address override, using 0x%08x instead of 0x%08x\n", - dev->BiosBase, - info->BIOSAddr); - info->BIOSAddr = dev->BiosBase; - from = X_CONFIG; - } - if (info->BIOSAddr) { - xf86DrvMsg(pScrn->scrnIndex, from, - "BIOS at 0x%08lx\n", info->BIOSAddr); - } - - /* Flat panel (part 1) */ - if (xf86GetOptValBool(info->Options, OPTION_PROG_FP_REGS, - &info->HasPanelRegs)) { - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, - "Turned flat panel register programming %s\n", - info->HasPanelRegs ? "on" : "off"); - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "\n\nWARNING: Forcing the driver to use/not use the flat panel registers\nmight damage your flat panel. Use at your *OWN* *RISK*.\n\n"); - } else { - info->isDFP = FALSE; - info->isPro2 = FALSE; - switch (info->Chipset) { - /* R128 Pro and Pro2 can have DFP, we will deal with it. - No support for dual-head/xinerama yet. - M3 can also have DFP, no support for now */ - case PCI_CHIP_RAGE128TF: - case PCI_CHIP_RAGE128TL: - case PCI_CHIP_RAGE128TR: - /* FIXME: RAGE128 TS/TT/TU are assumed to be PRO2 as all 6 chips came - * out at the same time, so are of the same family likely. - * This requires confirmation however to be fully correct. - * Mike A. Harris <mharris@redhat.com> - */ - case PCI_CHIP_RAGE128TS: - case PCI_CHIP_RAGE128TT: - case PCI_CHIP_RAGE128TU: info->isPro2 = TRUE; - /* FIXME: RAGE128 P[ABCEGHIJKLMNOQSTUVWX] are assumed to have DFP - * capability, as the comment at the top suggests. - * This requires confirmation however to be fully correct. - * Mike A. Harris <mharris@redhat.com> - */ - case PCI_CHIP_RAGE128PA: - case PCI_CHIP_RAGE128PB: - case PCI_CHIP_RAGE128PC: - case PCI_CHIP_RAGE128PE: - case PCI_CHIP_RAGE128PG: - case PCI_CHIP_RAGE128PH: - case PCI_CHIP_RAGE128PI: - case PCI_CHIP_RAGE128PJ: - case PCI_CHIP_RAGE128PK: - case PCI_CHIP_RAGE128PL: - case PCI_CHIP_RAGE128PM: - case PCI_CHIP_RAGE128PN: - case PCI_CHIP_RAGE128PO: - case PCI_CHIP_RAGE128PQ: - case PCI_CHIP_RAGE128PS: - case PCI_CHIP_RAGE128PT: - case PCI_CHIP_RAGE128PU: - case PCI_CHIP_RAGE128PV: - case PCI_CHIP_RAGE128PW: - case PCI_CHIP_RAGE128PX: - - case PCI_CHIP_RAGE128PD: - case PCI_CHIP_RAGE128PF: - case PCI_CHIP_RAGE128PP: - case PCI_CHIP_RAGE128PR: info->isDFP = TRUE; break; - - case PCI_CHIP_RAGE128LE: - case PCI_CHIP_RAGE128LF: - case PCI_CHIP_RAGE128MF: - case PCI_CHIP_RAGE128ML: info->HasPanelRegs = TRUE; break; - case PCI_CHIP_RAGE128RE: - case PCI_CHIP_RAGE128RF: - case PCI_CHIP_RAGE128RG: - case PCI_CHIP_RAGE128RK: - case PCI_CHIP_RAGE128RL: - case PCI_CHIP_RAGE128SM: - /* FIXME: RAGE128 S[EFGHKLN] are assumed to be like the SM above as - * all of them are listed as "Rage 128 4x" in ATI docs. - * This requires confirmation however to be fully correct. - * Mike A. Harris <mharris@redhat.com> - */ - case PCI_CHIP_RAGE128SE: - case PCI_CHIP_RAGE128SF: - case PCI_CHIP_RAGE128SG: - case PCI_CHIP_RAGE128SH: - case PCI_CHIP_RAGE128SK: - case PCI_CHIP_RAGE128SL: - case PCI_CHIP_RAGE128SN: - default: info->HasPanelRegs = FALSE; break; - } - } - - /* Read registers used to determine options */ - from = X_PROBED; - R128MapMMIO(pScrn); - R128MMIO = info->MMIO; - - if (info->FBDev) - pScrn->videoRam = fbdevHWGetVidmem(pScrn) / 1024; - else - pScrn->videoRam = INREG(R128_CONFIG_MEMSIZE) / 1024; - - info->MemCntl = INREG(R128_MEM_CNTL); - info->BusCntl = INREG(R128_BUS_CNTL); - - /* On non-flat panel systems, the default is to display to the CRT, - and on flat panel systems, the default is to display to the flat - panel unless the user explicity chooses otherwise using the "Display" - config file setting. BIOS_5_SCRATCH holds the display device on flat - panel systems only. */ - if (info->HasPanelRegs) { - char *Display = xf86GetOptValString(info->Options, OPTION_DISPLAY); - - if (info->FBDev) - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Option \"Display\" ignored " - "(framebuffer device determines display type)\n"); - else if (!Display || !xf86NameCmp(Display, "FP")) - info->BIOSDisplay = R128_BIOS_DISPLAY_FP; - else if (!xf86NameCmp(Display, "BIOS")) - info->BIOSDisplay = INREG8(R128_BIOS_5_SCRATCH); - else if (!xf86NameCmp(Display, "Mirror")) - info->BIOSDisplay = R128_BIOS_DISPLAY_FP_CRT; - else if (!xf86NameCmp(Display, "CRT")) - info->BIOSDisplay = R128_BIOS_DISPLAY_CRT; - else { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Unsupported type \"%s\" specified for Option \"Display\".\n" - "\tSupported types are: " - "\"BIOS\", \"Mirror\", \"CRT\" and \"FP\"\n", Display); - return FALSE; - } - } else { - info->BIOSDisplay = R128_BIOS_DISPLAY_CRT; - } - - R128MMIO = NULL; - R128UnmapMMIO(pScrn); - - /* RAM */ - switch (info->MemCntl & 0x3) { - case 0: /* SDR SGRAM 1:1 */ - switch (info->Chipset) { - case PCI_CHIP_RAGE128TF: - case PCI_CHIP_RAGE128TL: - case PCI_CHIP_RAGE128TR: - case PCI_CHIP_RAGE128LE: - case PCI_CHIP_RAGE128LF: - case PCI_CHIP_RAGE128MF: - case PCI_CHIP_RAGE128ML: - case PCI_CHIP_RAGE128RE: - case PCI_CHIP_RAGE128RF: - case PCI_CHIP_RAGE128RG: offset = 0; break; /* 128-bit SDR SGRAM 1:1 */ - case PCI_CHIP_RAGE128RK: - case PCI_CHIP_RAGE128RL: - case PCI_CHIP_RAGE128SM: - default: offset = 1; break; /* 64-bit SDR SGRAM 1:1 */ - } - break; - case 1: offset = 2; break; /* 64-bit SDR SGRAM 2:1 */ - case 2: offset = 3; break; /* 64-bit DDR SGRAM */ - default: offset = 1; break; /* 64-bit SDR SGRAM 1:1 */ - } - info->ram = &R128RAM[offset]; - - if (dev->videoRam) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Video RAM override, using %d kB instead of %d kB\n", - dev->videoRam, - pScrn->videoRam); - from = X_CONFIG; - pScrn->videoRam = dev->videoRam; - } - pScrn->videoRam &= ~1023; - info->FbMapSize = pScrn->videoRam * 1024; - xf86DrvMsg(pScrn->scrnIndex, from, - "VideoRAM: %d kByte (%s)\n", pScrn->videoRam, info->ram->name); - - /* Flat panel (part 2) */ - switch (info->BIOSDisplay) { - case R128_BIOS_DISPLAY_FP: - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, - "Using flat panel for display\n"); - break; - case R128_BIOS_DISPLAY_CRT: - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, - "Using external CRT for display\n"); - break; - case R128_BIOS_DISPLAY_FP_CRT: - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, - "Using both flat panel and external CRT " - "for display\n"); - break; - } - - if (info->HasPanelRegs) { - /* Panel width/height overrides */ - info->PanelXRes = 0; - info->PanelYRes = 0; - if (xf86GetOptValInteger(info->Options, - OPTION_PANEL_WIDTH, &(info->PanelXRes))) { - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, - "Flat panel width: %d\n", info->PanelXRes); - } - if (xf86GetOptValInteger(info->Options, - OPTION_PANEL_HEIGHT, &(info->PanelYRes))) { - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, - "Flat panel height: %d\n", info->PanelYRes); - } - } - -#ifdef XF86DRI - /* DMA for Xv */ - info->DMAForXv = xf86ReturnOptValBool(info->Options, OPTION_XV_DMA, FALSE); - if (info->DMAForXv) { - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, - "Will try to use DMA for Xv image transfers\n"); - } - - /* AGP/PCI */ - if (xf86ReturnOptValBool(info->Options, OPTION_IS_PCI, FALSE)) { - info->IsPCI = TRUE; - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Forced into PCI-only mode\n"); - } else { - switch (info->Chipset) { - case PCI_CHIP_RAGE128LE: - case PCI_CHIP_RAGE128RE: - case PCI_CHIP_RAGE128RK: - case PCI_CHIP_RAGE128PD: - case PCI_CHIP_RAGE128PR: - case PCI_CHIP_RAGE128PP: info->IsPCI = TRUE; break; - case PCI_CHIP_RAGE128LF: - case PCI_CHIP_RAGE128MF: - case PCI_CHIP_RAGE128ML: - case PCI_CHIP_RAGE128PF: - case PCI_CHIP_RAGE128RF: - case PCI_CHIP_RAGE128RG: - case PCI_CHIP_RAGE128RL: - case PCI_CHIP_RAGE128SM: - case PCI_CHIP_RAGE128TF: - case PCI_CHIP_RAGE128TL: - case PCI_CHIP_RAGE128TR: - /* FIXME: Rage 128 S[EFGHKLN], T[STU], P[ABCEGHIJKLMNOQSTUVWX] are - * believed to be AGP, but need confirmation. <mharris@redhat.com> - */ - case PCI_CHIP_RAGE128PA: - case PCI_CHIP_RAGE128PB: - case PCI_CHIP_RAGE128PC: - case PCI_CHIP_RAGE128PE: - case PCI_CHIP_RAGE128PG: - case PCI_CHIP_RAGE128PH: - case PCI_CHIP_RAGE128PI: - case PCI_CHIP_RAGE128PJ: - case PCI_CHIP_RAGE128PK: - case PCI_CHIP_RAGE128PL: - case PCI_CHIP_RAGE128PM: - case PCI_CHIP_RAGE128PN: - case PCI_CHIP_RAGE128PO: - case PCI_CHIP_RAGE128PQ: - case PCI_CHIP_RAGE128PS: - case PCI_CHIP_RAGE128PT: - case PCI_CHIP_RAGE128PU: - case PCI_CHIP_RAGE128PV: - case PCI_CHIP_RAGE128PW: - case PCI_CHIP_RAGE128PX: - case PCI_CHIP_RAGE128TS: - case PCI_CHIP_RAGE128TT: - case PCI_CHIP_RAGE128TU: - case PCI_CHIP_RAGE128SE: - case PCI_CHIP_RAGE128SF: - case PCI_CHIP_RAGE128SG: - case PCI_CHIP_RAGE128SH: - case PCI_CHIP_RAGE128SK: - case PCI_CHIP_RAGE128SL: - case PCI_CHIP_RAGE128SN: - default: info->IsPCI = FALSE; break; - } - } -#endif - - return TRUE; -} - -static Bool R128PreInitDDC(ScrnInfoPtr pScrn, xf86Int10InfoPtr pInt10) -{ - R128InfoPtr info = R128PTR(pScrn); - vbeInfoPtr pVbe; - - if (!xf86LoadSubModule(pScrn, "ddc")) return FALSE; - xf86LoaderReqSymLists(ddcSymbols, NULL); - -#if defined(__powerpc__) || defined(__alpha__) - /* Int10 is broken on PPC and some Alphas */ - return TRUE; -#else - if (xf86LoadSubModule(pScrn, "vbe")) { - xf86LoaderReqSymLists(vbeSymbols,NULL); - pVbe = VBEInit(pInt10,info->pEnt->index); - if (!pVbe) return FALSE; - xf86SetDDCproperties(pScrn,xf86PrintEDID(vbeDoEDID(pVbe,NULL))); - vbeFree(pVbe); - return TRUE; - } else - return FALSE; -#endif -} - -/* This is called by R128PreInit to initialize gamma correction. */ -static Bool R128PreInitGamma(ScrnInfoPtr pScrn) -{ - Gamma zeros = { 0.0, 0.0, 0.0 }; - - if (!xf86SetGamma(pScrn, zeros)) return FALSE; - return TRUE; -} - -static void -R128I2CGetBits(I2CBusPtr b, int *Clock, int *data) -{ - ScrnInfoPtr pScrn = xf86Screens[b->scrnIndex]; - R128InfoPtr info = R128PTR(pScrn); - unsigned long val; - unsigned char *R128MMIO = info->MMIO; - - /* Get the result. */ - val = INREG(info->DDCReg); - *Clock = (val & R128_GPIO_MONID_Y_3) != 0; - *data = (val & R128_GPIO_MONID_Y_0) != 0; - -} - -static void -R128I2CPutBits(I2CBusPtr b, int Clock, int data) -{ - ScrnInfoPtr pScrn = xf86Screens[b->scrnIndex]; - R128InfoPtr info = R128PTR(pScrn); - unsigned long val; - unsigned char *R128MMIO = info->MMIO; - - val = INREG(info->DDCReg) - & ~(CARD32)(R128_GPIO_MONID_EN_0 | R128_GPIO_MONID_EN_3); - val |= (Clock ? 0:R128_GPIO_MONID_EN_3); - val |= (data ? 0:R128_GPIO_MONID_EN_0); - OUTREG(info->DDCReg, val); -} - - -static Bool -R128I2cInit(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - if ( xf86LoadSubModule(pScrn, "i2c") ) - xf86LoaderReqSymLists(i2cSymbols,NULL); - else{ - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Failed to load i2c module\n"); - return FALSE; - } - - info->pI2CBus = xf86CreateI2CBusRec(); - if(!info->pI2CBus) return FALSE; - - info->pI2CBus->BusName = "DDC"; - info->pI2CBus->scrnIndex = pScrn->scrnIndex; - info->DDCReg = R128_GPIO_MONID; - info->pI2CBus->I2CPutBits = R128I2CPutBits; - info->pI2CBus->I2CGetBits = R128I2CGetBits; - info->pI2CBus->AcknTimeout = 5; - - if (!xf86I2CBusInit(info->pI2CBus)) { - return FALSE; - } - return TRUE; -} - -/* return TRUE is a DFP is indeed connected to a DVI port */ -static Bool R128GetDFPInfo(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - int i; - xf86MonPtr MonInfo = NULL; - xf86MonPtr ddc; - unsigned char *R128MMIO = info->MMIO; - - if(!R128I2cInit(pScrn)){ - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "I2C initialization failed!\n"); - } - - OUTREG(info->DDCReg, (INREG(info->DDCReg) - | R128_GPIO_MONID_MASK_0 | R128_GPIO_MONID_MASK_3)); - - OUTREG(info->DDCReg, INREG(info->DDCReg) - & ~(CARD32)(R128_GPIO_MONID_A_0 | R128_GPIO_MONID_A_3)); - - MonInfo = xf86DoEDID_DDC2(pScrn->scrnIndex, info->pI2CBus); - if(!MonInfo) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "No DFP detected\n"); - return FALSE; - } - xf86SetDDCproperties(pScrn, MonInfo); - ddc = pScrn->monitor->DDC; - - for(i=0; i<4; i++) - { - if(ddc->det_mon[i].type == 0) - { - info->PanelXRes = - ddc->det_mon[i].section.d_timings.h_active; - info->PanelYRes = - ddc->det_mon[i].section.d_timings.v_active; - - info->HOverPlus = - ddc->det_mon[i].section.d_timings.h_sync_off; - info->HSyncWidth = - ddc->det_mon[i].section.d_timings.h_sync_width; - info->HBlank = - ddc->det_mon[i].section.d_timings.h_blanking; - info->VOverPlus = - ddc->det_mon[i].section.d_timings.v_sync_off; - info->VSyncWidth = - ddc->det_mon[i].section.d_timings.v_sync_width; - info->VBlank = - ddc->det_mon[i].section.d_timings.v_blanking; - } - } - return TRUE; -} - - -static void R128SetSyncRangeFromEdid(ScrnInfoPtr pScrn, int flag) -{ - int i; - xf86MonPtr ddc = pScrn->monitor->DDC; - if(flag) /*HSync*/ - { - for(i=0; i<4; i++) - { - if(ddc->det_mon[i].type == DS_RANGES) - { - pScrn->monitor->nHsync = 1; - pScrn->monitor->hsync[0].lo = - ddc->det_mon[i].section.ranges.min_h; - pScrn->monitor->hsync[0].hi = - ddc->det_mon[i].section.ranges.max_h; - return; - } - } - /*if no sync ranges detected in detailed timing table, - let's try to derive them from supported VESA modes - Are we doing too much here!!!? - **/ - i = 0; - if(ddc->timings1.t1 & 0x02) /*800x600@56*/ - { - pScrn->monitor->hsync[i].lo = - pScrn->monitor->hsync[i].hi = 35.2; - i++; - } - if(ddc->timings1.t1 & 0x04) /*640x480@75*/ - { - pScrn->monitor->hsync[i].lo = - pScrn->monitor->hsync[i].hi = 37.5; - i++; - } - if((ddc->timings1.t1 & 0x08) || (ddc->timings1.t1 & 0x01)) - { - pScrn->monitor->hsync[i].lo = - pScrn->monitor->hsync[i].hi = 37.9; - i++; - } - if(ddc->timings1.t2 & 0x40) - { - pScrn->monitor->hsync[i].lo = - pScrn->monitor->hsync[i].hi = 46.9; - i++; - } - if((ddc->timings1.t2 & 0x80) || (ddc->timings1.t2 & 0x08)) - { - pScrn->monitor->hsync[i].lo = - pScrn->monitor->hsync[i].hi = 48.1; - i++; - } - if(ddc->timings1.t2 & 0x04) - { - pScrn->monitor->hsync[i].lo = - pScrn->monitor->hsync[i].hi = 56.5; - i++; - } - if(ddc->timings1.t2 & 0x02) - { - pScrn->monitor->hsync[i].lo = - pScrn->monitor->hsync[i].hi = 60.0; - i++; - } - if(ddc->timings1.t2 & 0x01) - { - pScrn->monitor->hsync[i].lo = - pScrn->monitor->hsync[i].hi = 64.0; - i++; - } - pScrn->monitor->nHsync = i; - } - else /*Vrefresh*/ - { - for(i=0; i<4; i++) - { - if(ddc->det_mon[i].type == DS_RANGES) - { - pScrn->monitor->nVrefresh = 1; - pScrn->monitor->vrefresh[0].lo = - ddc->det_mon[i].section.ranges.min_v; - pScrn->monitor->vrefresh[0].hi = - ddc->det_mon[i].section.ranges.max_v; - return; - } - } - i = 0; - if(ddc->timings1.t1 & 0x02) /*800x600@56*/ - { - pScrn->monitor->vrefresh[i].lo = - pScrn->monitor->vrefresh[i].hi = 56; - i++; - } - if((ddc->timings1.t1 & 0x01) || (ddc->timings1.t2 & 0x08)) - { - pScrn->monitor->vrefresh[i].lo = - pScrn->monitor->vrefresh[i].hi = 60; - i++; - } - if(ddc->timings1.t2 & 0x04) - { - pScrn->monitor->vrefresh[i].lo = - pScrn->monitor->vrefresh[i].hi = 70; - i++; - } - if((ddc->timings1.t1 & 0x08) || (ddc->timings1.t2 & 0x80)) - { - pScrn->monitor->vrefresh[i].lo = - pScrn->monitor->vrefresh[i].hi = 72; - i++; - } - if((ddc->timings1.t1 & 0x04) || (ddc->timings1.t2 & 0x40) - || (ddc->timings1.t2 & 0x02) || (ddc->timings1.t2 & 0x01)) - { - pScrn->monitor->vrefresh[i].lo = - pScrn->monitor->vrefresh[i].hi = 75; - i++; - } - pScrn->monitor->nVrefresh = i; - } -} - -/*********** - xfree's xf86ValidateModes routine deosn't work well with DFPs - here is our own validation routine. All modes between - 640<=XRes<=MaxRes and 480<=YRes<=MaxYRes will be permitted. - NOTE: RageProII doesn't support rmx, can only work with the - standard modes the monitor can support (scale). -************/ - -static int R128ValidateFPModes(ScrnInfoPtr pScrn) -{ - int i, j, count=0, width, height; - R128InfoPtr info = R128PTR(pScrn); - DisplayModePtr last = NULL, new = NULL, first = NULL; - xf86MonPtr ddc; - - /* Free any allocated modes during configuration. We don't need them*/ - while (pScrn->modes) - { - xf86DeleteMode(&pScrn->modes, pScrn->modes); - } - while (pScrn->modePool) - { - xf86DeleteMode(&pScrn->modePool, pScrn->modePool); - } - - pScrn->virtualX = pScrn->display->virtualX; - pScrn->virtualY = pScrn->display->virtualY; - - /* If no mode specified in config, we use native resolution*/ - if(!pScrn->display->modes[0]) - { - pScrn->display->modes[0] = xnfalloc(16); - sprintf(pScrn->display->modes[0], "%dx%d", - info->PanelXRes, info->PanelYRes); - } - - for(i=0; pScrn->display->modes[i] != NULL; i++) - { - if (sscanf(pScrn->display->modes[i], "%dx%d", &width, &height) == 2) - { - - if(width < 640 || width > info->PanelXRes || - height < 480 || height > info->PanelYRes) - { - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Mode %s is out of range.\n" - "Valid mode should be between 640x480-%dx%d\n", - pScrn->display->modes[i], info->PanelXRes, info->PanelYRes); - continue; - } - - new = xnfcalloc(1, sizeof(DisplayModeRec)); - new->prev = last; - new->name = xnfalloc(strlen(pScrn->display->modes[i]) + 1); - strcpy(new->name, pScrn->display->modes[i]); - new->HDisplay = new->CrtcHDisplay = width; - new->VDisplay = new->CrtcVDisplay = height; - - ddc = pScrn->monitor->DDC; - for(j=0; j<DET_TIMINGS; j++) - { - /*We use native mode clock only*/ - if(ddc->det_mon[j].type == 0){ - new->Clock = ddc->det_mon[j].section.d_timings.clock / 1000; - break; - } - } - - if(new->prev) new->prev->next = new; - last = new; - if(!first) first = new; - pScrn->display->virtualX = - pScrn->virtualX = MAX(pScrn->virtualX, width); - pScrn->display->virtualY = - pScrn->virtualY = MAX(pScrn->virtualY, height); - count++; - } - else - { - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Mode name %s is invalid\n", pScrn->display->modes[i]); - continue; - } - } - - if(last) - { - last->next = first; - first->prev = last; - pScrn->modes = first; - - /*FIXME: May need to validate line pitch here*/ - { - int dummy = 0; - switch(pScrn->depth / 8) - { - case 1: - dummy = 128 - pScrn->virtualX % 128; - break; - case 2: - dummy = 32 - pScrn->virtualX % 32; - break; - case 3: - case 4: - dummy = 16 - pScrn->virtualX % 16; - } - pScrn->displayWidth = pScrn->virtualX + dummy; - } - - } - - return count; -} - - -/* This is called by R128PreInit to validate modes and compute parameters - for all of the valid modes. */ -static Bool R128PreInitModes(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - ClockRangePtr clockRanges; - int modesFound; - - if(info->isDFP) { - R128MapMem(pScrn); - info->BIOSDisplay = R128_BIOS_DISPLAY_FP; - /* validate if DFP really connected. */ - if(!R128GetDFPInfo(pScrn)) { - info->isDFP = FALSE; - info->BIOSDisplay = R128_BIOS_DISPLAY_CRT; - } else if(!info->isPro2) { - /* RageProII doesn't support rmx, we can't use native-mode - stretching for other non-native modes. It will rely on - whatever VESA modes monitor can support. */ - modesFound = R128ValidateFPModes(pScrn); - if(modesFound < 1) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "No valid mode found for this DFP/LCD\n"); - R128UnmapMem(pScrn); - return FALSE; - - } - } - R128UnmapMem(pScrn); - } - - if(!info->isDFP || info->isPro2) { - /* Get mode information */ - pScrn->progClock = TRUE; - clockRanges = xnfcalloc(sizeof(*clockRanges), 1); - clockRanges->next = NULL; - clockRanges->minClock = info->pll.min_pll_freq; - clockRanges->maxClock = info->pll.max_pll_freq * 10; - clockRanges->clockIndex = -1; - if (info->HasPanelRegs || info->isDFP) { - clockRanges->interlaceAllowed = FALSE; - clockRanges->doubleScanAllowed = FALSE; - } else { - clockRanges->interlaceAllowed = TRUE; - clockRanges->doubleScanAllowed = TRUE; - } - - if(pScrn->monitor->DDC) { - /*if we still don't know sync range yet, let's try EDID. - Note that, since we can have dual heads, the Xconfigurator - may not be able to probe both monitors correctly through - vbe probe function (R128ProbeDDC). Here we provide an - additional way to auto-detect sync ranges if they haven't - been added to XF86Config manually. - **/ - if(pScrn->monitor->nHsync <= 0) - R128SetSyncRangeFromEdid(pScrn, 1); - if(pScrn->monitor->nVrefresh <= 0) - R128SetSyncRangeFromEdid(pScrn, 0); - } - - modesFound = xf86ValidateModes(pScrn, - pScrn->monitor->Modes, - pScrn->display->modes, - clockRanges, - NULL, /* linePitches */ - 8 * 64, /* minPitch */ - 8 * 1024, /* maxPitch */ - 8 * 64, /* pitchInc */ - 128, /* minHeight */ - 2048, /* maxHeight */ - pScrn->display->virtualX, - pScrn->display->virtualY, - info->FbMapSize, - LOOKUP_BEST_REFRESH); - - if (modesFound < 1 && info->FBDev) { - fbdevHWUseBuildinMode(pScrn); - pScrn->displayWidth = fbdevHWGetLineLength(pScrn)/(pScrn->bitsPerPixel/8); - modesFound = 1; - } - - if (modesFound == -1) return FALSE; - xf86PruneDriverModes(pScrn); - if (!modesFound || !pScrn->modes) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid modes found\n"); - return FALSE; - } - xf86SetCrtcForModes(pScrn, 0); - } - /* Set DPI */ - pScrn->currentMode = pScrn->modes; - xf86PrintModes(pScrn); - - xf86SetDpi(pScrn, 0, 0); - - /* Get ScreenInit function */ - if (!xf86LoadSubModule(pScrn, "fb")) return FALSE; - xf86LoaderReqSymLists(fbSymbols, NULL); - - info->CurrentLayout.displayWidth = pScrn->displayWidth; - info->CurrentLayout.mode = pScrn->currentMode; - - return TRUE; -} - -/* This is called by R128PreInit to initialize the hardware cursor. */ -static Bool R128PreInitCursor(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - - if (!xf86ReturnOptValBool(info->Options, OPTION_SW_CURSOR, FALSE)) { - if (!xf86LoadSubModule(pScrn, "ramdac")) return FALSE; - xf86LoaderReqSymLists(ramdacSymbols, NULL); - } - return TRUE; -} - -/* This is called by R128PreInit to initialize hardware acceleration. */ -static Bool R128PreInitAccel(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - - if (!xf86ReturnOptValBool(info->Options, OPTION_NOACCEL, FALSE)) { - if (!xf86LoadSubModule(pScrn, "xaa")) return FALSE; - xf86LoaderReqSymLists(xaaSymbols, NULL); - } - return TRUE; -} - -static Bool R128PreInitInt10(ScrnInfoPtr pScrn, xf86Int10InfoPtr *ppInt10) -{ - R128InfoPtr info = R128PTR(pScrn); -#if 1 && !defined(__alpha__) - /* int10 is broken on some Alphas */ - if (xf86LoadSubModule(pScrn, "int10")) { - xf86LoaderReqSymLists(int10Symbols, NULL); - xf86DrvMsg(pScrn->scrnIndex,X_INFO,"initializing int10\n"); - *ppInt10 = xf86InitInt10(info->pEnt->index); - } -#endif - return TRUE; -} - -#ifdef XF86DRI -static Bool R128PreInitDRI(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - - if (xf86ReturnOptValBool(info->Options, OPTION_CCE_PIO, FALSE)) { - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Forcing CCE into PIO mode\n"); - info->CCEMode = R128_DEFAULT_CCE_PIO_MODE; - } else { - info->CCEMode = R128_DEFAULT_CCE_BM_MODE; - } - - if (xf86ReturnOptValBool(info->Options, OPTION_NO_SECURITY, FALSE)) { - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, - "WARNING!!! CCE Security checks disabled!!! **********\n"); - info->CCESecure = FALSE; - } else { - info->CCESecure = TRUE; - } - - info->agpMode = R128_DEFAULT_AGP_MODE; - info->agpSize = R128_DEFAULT_AGP_SIZE; - info->ringSize = R128_DEFAULT_RING_SIZE; - info->bufSize = R128_DEFAULT_BUFFER_SIZE; - info->agpTexSize = R128_DEFAULT_AGP_TEX_SIZE; - - info->CCEusecTimeout = R128_DEFAULT_CCE_TIMEOUT; - - if (!info->IsPCI) { - if (xf86GetOptValInteger(info->Options, - OPTION_AGP_MODE, &(info->agpMode))) { - if (info->agpMode < 1 || info->agpMode > R128_AGP_MAX_MODE) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Illegal AGP Mode: %d\n", info->agpMode); - return FALSE; - } - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, - "Using AGP %dx mode\n", info->agpMode); - } - - if (xf86GetOptValInteger(info->Options, - OPTION_AGP_SIZE, (int *)&(info->agpSize))) { - switch (info->agpSize) { - case 4: - case 8: - case 16: - case 32: - case 64: - case 128: - case 256: - break; - default: - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Illegal AGP size: %d MB\n", info->agpSize); - return FALSE; - } - } - - if (xf86GetOptValInteger(info->Options, - OPTION_RING_SIZE, &(info->ringSize))) { - if (info->ringSize < 1 || info->ringSize >= (int)info->agpSize) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Illegal ring buffer size: %d MB\n", - info->ringSize); - return FALSE; - } - } - - if (xf86GetOptValInteger(info->Options, - OPTION_BUFFER_SIZE, &(info->bufSize))) { - if (info->bufSize < 1 || info->bufSize >= (int)info->agpSize) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Illegal vertex/indirect buffers size: %d MB\n", - info->bufSize); - return FALSE; - } - if (info->bufSize > 2) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Illegal vertex/indirect buffers size: %d MB\n", - info->bufSize); - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Clamping vertex/indirect buffers size to 2 MB\n"); - info->bufSize = 2; - } - } - - if (info->ringSize + info->bufSize + info->agpTexSize > - (int)info->agpSize) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Buffers are too big for requested AGP space\n"); - return FALSE; - } - - info->agpTexSize = info->agpSize - (info->ringSize + info->bufSize); - } - - if (xf86GetOptValInteger(info->Options, OPTION_USEC_TIMEOUT, - &(info->CCEusecTimeout))) { - /* This option checked by the R128 DRM kernel module */ - } - - if (!xf86LoadSubModule(pScrn, "shadowfb")) { - info->allowPageFlip = 0; - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Couldn't load shadowfb module:\n"); - } else { - xf86LoaderReqSymLists(driShadowFBSymbols, NULL); - - info->allowPageFlip = xf86ReturnOptValBool(info->Options, - OPTION_PAGE_FLIP, - FALSE); - } - - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Page flipping %sabled\n", - info->allowPageFlip ? "en" : "dis"); - - return TRUE; -} -#endif - -static void -R128ProbeDDC(ScrnInfoPtr pScrn, int indx) -{ - vbeInfoPtr pVbe; - if (xf86LoadSubModule(pScrn, "vbe")) { - pVbe = VBEInit(NULL,indx); - ConfiguredMonitor = vbeDoEDID(pVbe, NULL); - vbeFree(pVbe); - } -} - -/* R128PreInit is called once at server startup. */ -Bool R128PreInit(ScrnInfoPtr pScrn, int flags) -{ - R128InfoPtr info; - xf86Int10InfoPtr pInt10 = NULL; - - R128TRACE(("R128PreInit\n")); - - if (pScrn->numEntities != 1) return FALSE; - - if (!R128GetRec(pScrn)) return FALSE; - - info = R128PTR(pScrn); - - info->pEnt = xf86GetEntityInfo(pScrn->entityList[0]); - if (info->pEnt->location.type != BUS_PCI) goto fail; - - if (flags & PROBE_DETECT) { - R128ProbeDDC(pScrn, info->pEnt->index); - return TRUE; - } - - if (!xf86LoadSubModule(pScrn, "vgahw")) return FALSE; - xf86LoaderReqSymLists(vgahwSymbols, NULL); - if (!vgaHWGetHWRec(pScrn)) { - R128FreeRec(pScrn); - return FALSE; - } - - info->PciInfo = xf86GetPciInfoForEntity(info->pEnt->index); - info->PciTag = pciTag(info->PciInfo->bus, - info->PciInfo->device, - info->PciInfo->func); - - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "PCI bus %d card %d func %d\n", - info->PciInfo->bus, - info->PciInfo->device, - info->PciInfo->func); - - if (xf86RegisterResources(info->pEnt->index, 0, ResNone)) goto fail; - if (xf86SetOperatingState(resVga, info->pEnt->index, ResUnusedOpr)) goto fail; - - pScrn->racMemFlags = RAC_FB | RAC_COLORMAP | RAC_VIEWPORT | RAC_CURSOR; - pScrn->monitor = pScrn->confScreen->monitor; - - if (!R128PreInitVisual(pScrn)) goto fail; - - /* We can't do this until we have a - pScrn->display. */ - xf86CollectOptions(pScrn, NULL); - if (!(info->Options = xalloc(sizeof(R128Options)))) goto fail; - memcpy(info->Options, R128Options, sizeof(R128Options)); - xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, info->Options); - - if (!R128PreInitWeight(pScrn)) goto fail; - - if(xf86GetOptValInteger(info->Options, OPTION_VIDEO_KEY, &(info->videoKey))) { - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "video key set to 0x%x\n", - info->videoKey); - } else { - info->videoKey = 0x1E; - } - - if (xf86ReturnOptValBool(info->Options, OPTION_SHOW_CACHE, FALSE)) { - info->showCache = TRUE; - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ShowCache enabled\n"); - } - - if (xf86ReturnOptValBool(info->Options, OPTION_FBDEV, FALSE)) { - info->FBDev = TRUE; - xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, - "Using framebuffer device\n"); - } - - if (info->FBDev) { - /* check for linux framebuffer device */ - if (!xf86LoadSubModule(pScrn, "fbdevhw")) return FALSE; - xf86LoaderReqSymLists(fbdevHWSymbols, NULL); - if (!fbdevHWInit(pScrn, info->PciInfo, NULL)) return FALSE; - pScrn->SwitchMode = fbdevHWSwitchMode; - pScrn->AdjustFrame = fbdevHWAdjustFrame; - pScrn->ValidMode = fbdevHWValidMode; - } - - if (!info->FBDev) - if (!R128PreInitInt10(pScrn, &pInt10)) goto fail; - - if (!R128PreInitConfig(pScrn)) goto fail; - - if (!R128GetBIOSParameters(pScrn, pInt10)) goto fail; - - if (!R128GetPLLParameters(pScrn)) goto fail; - - /* Don't fail on this one */ - R128PreInitDDC(pScrn, pInt10); - - if (!R128PreInitGamma(pScrn)) goto fail; - - if (!R128PreInitModes(pScrn)) goto fail; - - if (!R128PreInitCursor(pScrn)) goto fail; - - if (!R128PreInitAccel(pScrn)) goto fail; - -#ifdef XF86DRI - if (!R128PreInitDRI(pScrn)) goto fail; -#endif - - /* Free the video bios (if applicable) */ - if (info->VBIOS) { - xfree(info->VBIOS); - info->VBIOS = NULL; - } - - /* Free int10 info */ - if (pInt10) - xf86FreeInt10(pInt10); - - xf86DrvMsg(pScrn->scrnIndex, X_NOTICE, - "For information on using the multimedia capabilities\n of this" - " adapter, please see http://gatos.sf.net.\n"); - - return TRUE; - - fail: - /* Pre-init failed. */ - - /* Free the video bios (if applicable) */ - if (info->VBIOS) { - xfree(info->VBIOS); - info->VBIOS = NULL; - } - - /* Free int10 info */ - if (pInt10) - xf86FreeInt10(pInt10); - - vgaHWFreeHWRec(pScrn); - R128FreeRec(pScrn); - return FALSE; -} - -/* Load a palette. */ -static void R128LoadPalette(ScrnInfoPtr pScrn, int numColors, - int *indices, LOCO *colors, VisualPtr pVisual) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int i; - int idx; - unsigned char r, g, b; - - /* Select palette 0 (main CRTC) if using FP-enabled chip */ - if (info->HasPanelRegs || info->isDFP) PAL_SELECT(0); - - if (info->CurrentLayout.depth == 15) { - /* 15bpp mode. This sends 32 values. */ - for (i = 0; i < numColors; i++) { - idx = indices[i]; - r = colors[idx].red; - g = colors[idx].green; - b = colors[idx].blue; - OUTPAL(idx * 8, r, g, b); - } - } - else if (info->CurrentLayout.depth == 16) { - /* 16bpp mode. This sends 64 values. */ - /* There are twice as many green values as - there are values for red and blue. So, - we take each red and blue pair, and - combine it with each of the two green - values. */ - for (i = 0; i < numColors; i++) { - idx = indices[i]; - r = colors[idx / 2].red; - g = colors[idx].green; - b = colors[idx / 2].blue; - OUTPAL(idx * 4, r, g, b); - } - } - else { - /* 8bpp mode. This sends 256 values. */ - for (i = 0; i < numColors; i++) { - idx = indices[i]; - r = colors[idx].red; - b = colors[idx].blue; - g = colors[idx].green; - OUTPAL(idx, r, g, b); - } - } -} - -static void -R128BlockHandler(int i, pointer blockData, pointer pTimeout, pointer pReadmask) -{ - ScreenPtr pScreen = screenInfo.screens[i]; - ScrnInfoPtr pScrn = xf86Screens[i]; - R128InfoPtr info = R128PTR(pScrn); - -#ifdef XF86DRI - if (info->directRenderingEnabled) - FLUSH_RING(); -#endif - - pScreen->BlockHandler = info->BlockHandler; - (*pScreen->BlockHandler) (i, blockData, pTimeout, pReadmask); - pScreen->BlockHandler = R128BlockHandler; - - if(info->VideoTimerCallback) { - (*info->VideoTimerCallback)(pScrn, currentTime.milliseconds); - } -} - -/* Called at the start of each server generation. */ -Bool R128ScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - R128InfoPtr info = R128PTR(pScrn); - BoxRec MemBox; - int y2; - - R128TRACE(("R128ScreenInit %x %d\n", pScrn->memPhysBase, pScrn->fbOffset)); - -#ifdef XF86DRI - /* Turn off the CCE for now. */ - info->CCEInUse = FALSE; - info->indirectBuffer = NULL; -#endif - - if (!R128MapMem(pScrn)) return FALSE; - pScrn->fbOffset = 0; -#ifdef XF86DRI - info->fbX = 0; - info->fbY = 0; - info->frontOffset = 0; - info->frontPitch = pScrn->displayWidth; -#endif - - info->PaletteSavedOnVT = FALSE; - - R128Save(pScrn); - if (info->FBDev) { - if (!fbdevHWModeInit(pScrn, pScrn->currentMode)) return FALSE; - } else { - if (!R128ModeInit(pScrn, pScrn->currentMode)) return FALSE; - } - - R128SaveScreen(pScreen, SCREEN_SAVER_ON); - pScrn->AdjustFrame(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0); - - /* Visual setup */ - miClearVisualTypes(); - if (!miSetVisualTypes(pScrn->depth, - miGetDefaultVisualMask(pScrn->depth), - pScrn->rgbBits, - pScrn->defaultVisual)) return FALSE; - miSetPixmapDepths (); - -#ifdef XF86DRI - /* Setup DRI after visuals have been - established, but before fbScreenInit is - called. fbScreenInit will eventually - call the driver's InitGLXVisuals call - back. */ - { - /* FIXME: When we move to dynamic allocation of back and depth - buffers, we will want to revisit the following check for 3 - times the virtual size of the screen below. */ - int width_bytes = (pScrn->displayWidth * - info->CurrentLayout.pixel_bytes); - int maxy = info->FbMapSize / width_bytes; - - if (xf86ReturnOptValBool(info->Options, OPTION_NOACCEL, FALSE)) { - xf86DrvMsg(scrnIndex, X_WARNING, - "Acceleration disabled, not initializing the DRI\n"); - info->directRenderingEnabled = FALSE; - } else if (maxy <= pScrn->virtualY * 3) { - xf86DrvMsg(scrnIndex, X_WARNING, - "Static buffer allocation failed -- " - "need at least %d kB video memory\n", - (pScrn->displayWidth * pScrn->virtualY * - info->CurrentLayout.pixel_bytes * 3 + 1023) / 1024); - info->directRenderingEnabled = FALSE; - } else { - info->directRenderingEnabled = R128DRIScreenInit(pScreen); - } - } -#endif - - if (!fbScreenInit (pScreen, info->FB, - pScrn->virtualX, pScrn->virtualY, - pScrn->xDpi, pScrn->yDpi, pScrn->displayWidth, - pScrn->bitsPerPixel)) - return FALSE; - - xf86SetBlackWhitePixels(pScreen); - - if (pScrn->bitsPerPixel > 8) { - VisualPtr visual; - - visual = pScreen->visuals + pScreen->numVisuals; - while (--visual >= pScreen->visuals) { - if ((visual->class | DynamicClass) == DirectColor) { - visual->offsetRed = pScrn->offset.red; - visual->offsetGreen = pScrn->offset.green; - visual->offsetBlue = pScrn->offset.blue; - visual->redMask = pScrn->mask.red; - visual->greenMask = pScrn->mask.green; - visual->blueMask = pScrn->mask.blue; - } - } - } - - /* must be after RGB order fixed */ - fbPictureInit (pScreen, 0, 0); - - /* Memory manager setup */ -#ifdef XF86DRI - if (info->directRenderingEnabled) { - FBAreaPtr fbarea; - int width_bytes = (pScrn->displayWidth * - info->CurrentLayout.pixel_bytes); - int cpp = info->CurrentLayout.pixel_bytes; - int bufferSize = pScrn->virtualY * width_bytes; - int l, total; - int scanlines; - - switch (info->CCEMode) { - case R128_DEFAULT_CCE_PIO_MODE: - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "CCE in PIO mode\n"); - break; - case R128_DEFAULT_CCE_BM_MODE: - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "CCE in BM mode\n"); - break; - default: - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "CCE in UNKNOWN mode\n"); - break; - } - - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Using %d MB AGP aperture\n", info->agpSize); - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Using %d MB for the ring buffer\n", info->ringSize); - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Using %d MB for vertex/indirect buffers\n", info->bufSize); - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Using %d MB for AGP textures\n", info->agpTexSize); - - /* Try for front, back, depth, and two framebuffers worth of - * pixmap cache. Should be enough for a fullscreen background - * image plus some leftovers. - */ - info->textureSize = info->FbMapSize - 5 * bufferSize; - - /* If that gives us less than half the available memory, let's - * be greedy and grab some more. Sorry, I care more about 3D - * performance than playing nicely, and you'll get around a full - * framebuffer's worth of pixmap cache anyway. - */ - if (info->textureSize < (int)info->FbMapSize / 2) { - info->textureSize = info->FbMapSize - 4 * bufferSize; - } - - if (info->textureSize > 0) { - l = R128MinBits((info->textureSize-1) / R128_NR_TEX_REGIONS); - if (l < R128_LOG_TEX_GRANULARITY) l = R128_LOG_TEX_GRANULARITY; - - /* Round the texture size up to the nearest whole number of - * texture regions. Again, be greedy about this, don't - * round down. - */ - info->log2TexGran = l; - info->textureSize = (info->textureSize >> l) << l; - } else { - info->textureSize = 0; - } - - /* Set a minimum usable local texture heap size. This will fit - * two 256x256x32bpp textures. - */ - if (info->textureSize < 512 * 1024) { - info->textureOffset = 0; - info->textureSize = 0; - } - - total = info->FbMapSize - info->textureSize; - scanlines = total / width_bytes; - if (scanlines > 8191) scanlines = 8191; - - /* Recalculate the texture offset and size to accomodate any - * rounding to a whole number of scanlines. - */ - info->textureOffset = scanlines * width_bytes; - - MemBox.x1 = 0; - MemBox.y1 = 0; - MemBox.x2 = pScrn->displayWidth; - MemBox.y2 = scanlines; - - if (!xf86InitFBManager(pScreen, &MemBox)) { - xf86DrvMsg(scrnIndex, X_ERROR, - "Memory manager initialization to (%d,%d) (%d,%d) failed\n", - MemBox.x1, MemBox.y1, MemBox.x2, MemBox.y2); - return FALSE; - } else { - int width, height; - - xf86DrvMsg(scrnIndex, X_INFO, - "Memory manager initialized to (%d,%d) (%d,%d)\n", - MemBox.x1, MemBox.y1, MemBox.x2, MemBox.y2); - if ((fbarea = xf86AllocateOffscreenArea(pScreen, - pScrn->displayWidth, - 2, 0, NULL, NULL, NULL))) { - xf86DrvMsg(scrnIndex, X_INFO, - "Reserved area from (%d,%d) to (%d,%d)\n", - fbarea->box.x1, fbarea->box.y1, - fbarea->box.x2, fbarea->box.y2); - } else { - xf86DrvMsg(scrnIndex, X_ERROR, "Unable to reserve area\n"); - } - if (xf86QueryLargestOffscreenArea(pScreen, &width, - &height, 0, 0, 0)) { - xf86DrvMsg(scrnIndex, X_INFO, - "Largest offscreen area available: %d x %d\n", - width, height); - } - } - - /* Allocate the shared back buffer */ - if ((fbarea = xf86AllocateOffscreenArea(pScreen, - pScrn->virtualX, - pScrn->virtualY, - 32, NULL, NULL, NULL))) { - xf86DrvMsg(scrnIndex, X_INFO, - "Reserved back buffer from (%d,%d) to (%d,%d)\n", - fbarea->box.x1, fbarea->box.y1, - fbarea->box.x2, fbarea->box.y2); - - info->backX = fbarea->box.x1; - info->backY = fbarea->box.y1; - info->backOffset = (fbarea->box.y1 * width_bytes + - fbarea->box.x1 * cpp); - info->backPitch = pScrn->displayWidth; - } else { - xf86DrvMsg(scrnIndex, X_ERROR, "Unable to reserve back buffer\n"); - info->backX = -1; - info->backY = -1; - info->backOffset = -1; - info->backPitch = -1; - } - - /* Allocate the shared depth buffer */ - if ((fbarea = xf86AllocateOffscreenArea(pScreen, - pScrn->virtualX, - pScrn->virtualY + 1, - 32, NULL, NULL, NULL))) { - xf86DrvMsg(scrnIndex, X_INFO, - "Reserved depth buffer from (%d,%d) to (%d,%d)\n", - fbarea->box.x1, fbarea->box.y1, - fbarea->box.x2, fbarea->box.y2); - - info->depthX = fbarea->box.x1; - info->depthY = fbarea->box.y1; - info->depthOffset = (fbarea->box.y1 * width_bytes + - fbarea->box.x1 * cpp); - info->depthPitch = pScrn->displayWidth; - info->spanOffset = ((fbarea->box.y2 - 1) * width_bytes + - fbarea->box.x1 * cpp); - xf86DrvMsg(scrnIndex, X_INFO, - "Reserved depth span from (%d,%d) offset 0x%x\n", - fbarea->box.x1, fbarea->box.y2 - 1, info->spanOffset); - } else { - xf86DrvMsg(scrnIndex, X_ERROR, "Unable to reserve depth buffer\n"); - info->depthX = -1; - info->depthY = -1; - info->depthOffset = -1; - info->depthPitch = -1; - info->spanOffset = -1; - } - - xf86DrvMsg(scrnIndex, X_INFO, - "Reserved %d kb for textures at offset 0x%x\n", - info->textureSize/1024, info->textureOffset); - } - else -#endif - { - MemBox.x1 = 0; - MemBox.y1 = 0; - MemBox.x2 = pScrn->displayWidth; - y2 = (info->FbMapSize - / (pScrn->displayWidth * - info->CurrentLayout.pixel_bytes)); - /* The acceleration engine uses 14 bit - signed coordinates, so we can't have any - drawable caches beyond this region. */ - if (y2 > 8191) y2 = 8191; - MemBox.y2 = y2; - - if (!xf86InitFBManager(pScreen, &MemBox)) { - xf86DrvMsg(scrnIndex, X_ERROR, - "Memory manager initialization to (%d,%d) (%d,%d) failed\n", - MemBox.x1, MemBox.y1, MemBox.x2, MemBox.y2); - return FALSE; - } else { - int width, height; - FBAreaPtr fbarea; - - xf86DrvMsg(scrnIndex, X_INFO, - "Memory manager initialized to (%d,%d) (%d,%d)\n", - MemBox.x1, MemBox.y1, MemBox.x2, MemBox.y2); - if ((fbarea = xf86AllocateOffscreenArea(pScreen, pScrn->displayWidth, - 2, 0, NULL, NULL, NULL))) { - xf86DrvMsg(scrnIndex, X_INFO, - "Reserved area from (%d,%d) to (%d,%d)\n", - fbarea->box.x1, fbarea->box.y1, - fbarea->box.x2, fbarea->box.y2); - } else { - xf86DrvMsg(scrnIndex, X_ERROR, "Unable to reserve area\n"); - } - if (xf86QueryLargestOffscreenArea(pScreen, &width, &height, - 0, 0, 0)) { - xf86DrvMsg(scrnIndex, X_INFO, - "Largest offscreen area available: %d x %d\n", - width, height); - } - } - } - - /* Acceleration setup */ - if (!xf86ReturnOptValBool(info->Options, OPTION_NOACCEL, FALSE)) { - if (R128AccelInit(pScreen)) { - xf86DrvMsg(scrnIndex, X_INFO, "Acceleration enabled\n"); - info->accelOn = TRUE; - } else { - xf86DrvMsg(scrnIndex, X_ERROR, - "Acceleration initialization failed\n"); - xf86DrvMsg(scrnIndex, X_INFO, "Acceleration disabled\n"); - info->accelOn = FALSE; - } - } else { - xf86DrvMsg(scrnIndex, X_INFO, "Acceleration disabled\n"); - info->accelOn = FALSE; - } - - /* DGA setup */ - R128DGAInit(pScreen); - - /* Backing store setup */ - miInitializeBackingStore(pScreen); - xf86SetBackingStore(pScreen); - - /* Set Silken Mouse */ - xf86SetSilkenMouse(pScreen); - - /* Cursor setup */ - miDCInitialize(pScreen, xf86GetPointerScreenFuncs()); - - /* Hardware cursor setup */ - if (!xf86ReturnOptValBool(info->Options, OPTION_SW_CURSOR, FALSE)) { - if (R128CursorInit(pScreen)) { - int width, height; - - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Using hardware cursor (scanline %d)\n", - info->cursor_start / pScrn->displayWidth); - if (xf86QueryLargestOffscreenArea(pScreen, &width, &height, - 0, 0, 0)) { - xf86DrvMsg(scrnIndex, X_INFO, - "Largest offscreen area available: %d x %d\n", - width, height); - } - } else { - xf86DrvMsg(scrnIndex, X_ERROR, - "Hardware cursor initialization failed\n"); - xf86DrvMsg(scrnIndex, X_INFO, "Using software cursor\n"); - } - } else { - info->cursor_start = 0; - xf86DrvMsg(scrnIndex, X_INFO, "Using software cursor\n"); - } - - /* Colormap setup */ - if (!miCreateDefColormap(pScreen)) return FALSE; - if (!xf86HandleColormaps(pScreen, 256, info->dac6bits ? 6 : 8, - (info->FBDev ? fbdevHWLoadPalette : - R128LoadPalette), NULL, - CMAP_PALETTED_TRUECOLOR - | CMAP_RELOAD_ON_MODE_SWITCH -#if 0 /* This option messes up text mode! (eich@suse.de) */ - | CMAP_LOAD_EVEN_IF_OFFSCREEN -#endif - )) return FALSE; - - /* DPMS setup - FIXME: also for mirror mode in non-fbdev case? - Michel */ - if (info->FBDev) - xf86DPMSInit(pScreen, fbdevHWDPMSSet, 0); - else { - if (!info->HasPanelRegs || info->BIOSDisplay == R128_BIOS_DISPLAY_CRT) - xf86DPMSInit(pScreen, R128DisplayPowerManagementSet, 0); - else if (info->HasPanelRegs || info->BIOSDisplay == R128_BIOS_DISPLAY_FP) - xf86DPMSInit(pScreen, R128DisplayPowerManagementSetLCD, 0); - } - - R128InitVideo(pScreen); - - /* Provide SaveScreen */ - pScreen->SaveScreen = R128SaveScreen; - - /* Wrap CloseScreen */ - info->CloseScreen = pScreen->CloseScreen; - pScreen->CloseScreen = R128CloseScreen; - - /* Note unused options */ - if (serverGeneration == 1) - xf86ShowUnusedOptions(pScrn->scrnIndex, pScrn->options); - -#ifdef XF86DRI - /* DRI finalization */ - if (info->directRenderingEnabled) { - /* Now that mi, fb, drm and others have - done their thing, complete the DRI - setup. */ - info->directRenderingEnabled = R128DRIFinishScreenInit(pScreen); - } - if (info->directRenderingEnabled) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Direct rendering enabled\n"); - } else { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Direct rendering disabled\n"); - } -#endif - - info->BlockHandler = pScreen->BlockHandler; - pScreen->BlockHandler = R128BlockHandler; - - return TRUE; -} - -/* Write common registers (initialized to 0). */ -static void R128RestoreCommonRegisters(ScrnInfoPtr pScrn, R128SavePtr restore) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - OUTREG(R128_FP_GEN_CNTL, restore->fp_gen_cntl | R128_FP_BLANK_DIS); - - OUTREG(R128_OVR_CLR, restore->ovr_clr); - OUTREG(R128_OVR_WID_LEFT_RIGHT, restore->ovr_wid_left_right); - OUTREG(R128_OVR_WID_TOP_BOTTOM, restore->ovr_wid_top_bottom); - OUTREG(R128_OV0_SCALE_CNTL, restore->ov0_scale_cntl); - OUTREG(R128_MPP_TB_CONFIG, restore->mpp_tb_config ); - OUTREG(R128_MPP_GP_CONFIG, restore->mpp_gp_config ); - OUTREG(R128_SUBPIC_CNTL, restore->subpic_cntl); - OUTREG(R128_VIPH_CONTROL, restore->viph_control); - OUTREG(R128_I2C_CNTL_1, restore->i2c_cntl_1); - OUTREG(R128_GEN_INT_CNTL, restore->gen_int_cntl); - OUTREG(R128_CAP0_TRIG_CNTL, restore->cap0_trig_cntl); - OUTREG(R128_CAP1_TRIG_CNTL, restore->cap1_trig_cntl); - OUTREG(R128_BUS_CNTL, restore->bus_cntl); - OUTREG(R128_CONFIG_CNTL, restore->config_cntl); -} - -/* Write CRTC registers. */ -static void R128RestoreCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr restore) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - OUTREG(R128_CRTC_GEN_CNTL, restore->crtc_gen_cntl); - - OUTREGP(R128_CRTC_EXT_CNTL, restore->crtc_ext_cntl, - R128_CRTC_VSYNC_DIS | R128_CRTC_HSYNC_DIS | R128_CRTC_DISPLAY_DIS); - - OUTREGP(R128_DAC_CNTL, restore->dac_cntl, - R128_DAC_RANGE_CNTL | R128_DAC_BLANKING); - - OUTREG(R128_CRTC_H_TOTAL_DISP, restore->crtc_h_total_disp); - OUTREG(R128_CRTC_H_SYNC_STRT_WID, restore->crtc_h_sync_strt_wid); - OUTREG(R128_CRTC_V_TOTAL_DISP, restore->crtc_v_total_disp); - OUTREG(R128_CRTC_V_SYNC_STRT_WID, restore->crtc_v_sync_strt_wid); - OUTREG(R128_CRTC_OFFSET, restore->crtc_offset); - OUTREG(R128_CRTC_OFFSET_CNTL, restore->crtc_offset_cntl); - OUTREG(R128_CRTC_PITCH, restore->crtc_pitch); -} - -/* Write flat panel registers */ -static void R128RestoreFPRegisters(ScrnInfoPtr pScrn, R128SavePtr restore) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - CARD32 tmp; - - - /*OUTREG(R128_CRTC2_GEN_CNTL, restore->crtc2_gen_cntl);*/ - OUTREG(R128_FP_HORZ_STRETCH, restore->fp_horz_stretch); - OUTREG(R128_FP_VERT_STRETCH, restore->fp_vert_stretch); - OUTREG(R128_FP_CRTC_H_TOTAL_DISP, restore->fp_crtc_h_total_disp); - OUTREG(R128_FP_CRTC_V_TOTAL_DISP, restore->fp_crtc_v_total_disp); - OUTREG(R128_FP_H_SYNC_STRT_WID, restore->fp_h_sync_strt_wid); - OUTREG(R128_FP_V_SYNC_STRT_WID, restore->fp_v_sync_strt_wid); - OUTREG(R128_TMDS_CRC, restore->tmds_crc); - OUTREG(R128_FP_PANEL_CNTL, restore->fp_panel_cntl); - OUTREG(R128_FP_GEN_CNTL, restore->fp_gen_cntl & ~(CARD32)R128_FP_BLANK_DIS); - - if(info->isDFP) return; - - tmp = INREG(R128_LVDS_GEN_CNTL); - if ((tmp & (R128_LVDS_ON | R128_LVDS_BLON)) == - (restore->lvds_gen_cntl & (R128_LVDS_ON | R128_LVDS_BLON))) { - OUTREG(R128_LVDS_GEN_CNTL, restore->lvds_gen_cntl); - } else { - if (restore->lvds_gen_cntl & (R128_LVDS_ON | R128_LVDS_BLON)) { - OUTREG(R128_LVDS_GEN_CNTL, - restore->lvds_gen_cntl & (CARD32)~R128_LVDS_BLON); - usleep(R128PTR(pScrn)->PanelPwrDly * 1000); - OUTREG(R128_LVDS_GEN_CNTL, restore->lvds_gen_cntl); - } else { - OUTREG(R128_LVDS_GEN_CNTL, restore->lvds_gen_cntl | R128_LVDS_BLON); - usleep(R128PTR(pScrn)->PanelPwrDly * 1000); - OUTREG(R128_LVDS_GEN_CNTL, restore->lvds_gen_cntl); - } - } -} - -static void R128PLLWaitForReadUpdateComplete(ScrnInfoPtr pScrn) -{ - while (INPLL(pScrn, R128_PPLL_REF_DIV) & R128_PPLL_ATOMIC_UPDATE_R); -} - -static void R128PLLWriteUpdate(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - OUTPLLP(pScrn, R128_PPLL_REF_DIV, R128_PPLL_ATOMIC_UPDATE_W, 0xffff); -} - -/* Write PLL registers. */ -static void R128RestorePLLRegisters(ScrnInfoPtr pScrn, R128SavePtr restore) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - OUTREGP(R128_CLOCK_CNTL_INDEX, R128_PLL_DIV_SEL, 0xffff); - - OUTPLLP(pScrn, - R128_PPLL_CNTL, - R128_PPLL_RESET - | R128_PPLL_ATOMIC_UPDATE_EN - | R128_PPLL_VGA_ATOMIC_UPDATE_EN, - 0xffff); - - R128PLLWaitForReadUpdateComplete(pScrn); - OUTPLLP(pScrn, R128_PPLL_REF_DIV, - restore->ppll_ref_div, ~R128_PPLL_REF_DIV_MASK); - R128PLLWriteUpdate(pScrn); - - R128PLLWaitForReadUpdateComplete(pScrn); - OUTPLLP(pScrn, R128_PPLL_DIV_3, - restore->ppll_div_3, ~R128_PPLL_FB3_DIV_MASK); - R128PLLWriteUpdate(pScrn); - OUTPLLP(pScrn, R128_PPLL_DIV_3, - restore->ppll_div_3, ~R128_PPLL_POST3_DIV_MASK); - R128PLLWriteUpdate(pScrn); - - R128PLLWaitForReadUpdateComplete(pScrn); - OUTPLL(R128_HTOTAL_CNTL, restore->htotal_cntl); - R128PLLWriteUpdate(pScrn); - - OUTPLLP(pScrn, R128_PPLL_CNTL, 0, ~R128_PPLL_RESET); - - R128TRACE(("Wrote: 0x%08x 0x%08x 0x%08x (0x%08x)\n", - restore->ppll_ref_div, - restore->ppll_div_3, - restore->htotal_cntl, - INPLL(pScrn, R128_PPLL_CNTL))); - R128TRACE(("Wrote: rd=%d, fd=%d, pd=%d\n", - restore->ppll_ref_div & R128_PPLL_REF_DIV_MASK, - restore->ppll_div_3 & R128_PPLL_FB3_DIV_MASK, - (restore->ppll_div_3 & R128_PPLL_POST3_DIV_MASK) >> 16)); -} - -/* Write DDA registers. */ -static void R128RestoreDDARegisters(ScrnInfoPtr pScrn, R128SavePtr restore) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - OUTREG(R128_DDA_CONFIG, restore->dda_config); - OUTREG(R128_DDA_ON_OFF, restore->dda_on_off); -} - -/* Write palette data. */ -static void R128RestorePalette(ScrnInfoPtr pScrn, R128SavePtr restore) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int i; - - if (!restore->palette_valid) return; - - /* Select palette 0 (main CRTC) if using FP-enabled chip */ - if (info->HasPanelRegs || info->isDFP) PAL_SELECT(0); - - OUTPAL_START(0); - for (i = 0; i < 256; i++) OUTPAL_NEXT_CARD32(restore->palette[i]); -} - -/* Write out state to define a new video mode. */ -static void R128RestoreMode(ScrnInfoPtr pScrn, R128SavePtr restore) -{ - R128InfoPtr info = R128PTR(pScrn); - - R128TRACE(("R128RestoreMode(%p)\n", restore)); - R128RestoreCommonRegisters(pScrn, restore); - R128RestoreCrtcRegisters(pScrn, restore); - if (!(info->HasPanelRegs) || info->BIOSDisplay == R128_BIOS_DISPLAY_CRT){ - R128RestorePLLRegisters(pScrn, restore); - } - R128RestoreDDARegisters(pScrn, restore); - if (info->HasPanelRegs || info->isDFP) - R128RestoreFPRegisters(pScrn, restore); - - R128RestorePalette(pScrn, restore); -} - -/* Read common registers. */ -static void R128SaveCommonRegisters(ScrnInfoPtr pScrn, R128SavePtr save) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - save->ovr_clr = INREG(R128_OVR_CLR); - save->ovr_wid_left_right = INREG(R128_OVR_WID_LEFT_RIGHT); - save->ovr_wid_top_bottom = INREG(R128_OVR_WID_TOP_BOTTOM); - save->ov0_scale_cntl = INREG(R128_OV0_SCALE_CNTL); - save->mpp_tb_config = INREG(R128_MPP_TB_CONFIG); - save->mpp_gp_config = INREG(R128_MPP_GP_CONFIG); - save->subpic_cntl = INREG(R128_SUBPIC_CNTL); - save->viph_control = INREG(R128_VIPH_CONTROL); - save->i2c_cntl_1 = INREG(R128_I2C_CNTL_1); - save->gen_int_cntl = INREG(R128_GEN_INT_CNTL); - save->cap0_trig_cntl = INREG(R128_CAP0_TRIG_CNTL); - save->cap1_trig_cntl = INREG(R128_CAP1_TRIG_CNTL); - save->bus_cntl = INREG(R128_BUS_CNTL); - save->config_cntl = INREG(R128_CONFIG_CNTL); -} - -/* Read CRTC registers. */ -static void R128SaveCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr save) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - save->crtc_gen_cntl = INREG(R128_CRTC_GEN_CNTL); - save->crtc_ext_cntl = INREG(R128_CRTC_EXT_CNTL); - save->dac_cntl = INREG(R128_DAC_CNTL); - save->crtc_h_total_disp = INREG(R128_CRTC_H_TOTAL_DISP); - save->crtc_h_sync_strt_wid = INREG(R128_CRTC_H_SYNC_STRT_WID); - save->crtc_v_total_disp = INREG(R128_CRTC_V_TOTAL_DISP); - save->crtc_v_sync_strt_wid = INREG(R128_CRTC_V_SYNC_STRT_WID); - save->crtc_offset = INREG(R128_CRTC_OFFSET); - save->crtc_offset_cntl = INREG(R128_CRTC_OFFSET_CNTL); - save->crtc_pitch = INREG(R128_CRTC_PITCH); -} - -/* Read flat panel registers */ -static void R128SaveFPRegisters(ScrnInfoPtr pScrn, R128SavePtr save) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - save->crtc2_gen_cntl = INREG(R128_CRTC2_GEN_CNTL); - save->fp_crtc_h_total_disp = INREG(R128_FP_CRTC_H_TOTAL_DISP); - save->fp_crtc_v_total_disp = INREG(R128_FP_CRTC_V_TOTAL_DISP); - save->fp_gen_cntl = INREG(R128_FP_GEN_CNTL); - save->fp_h_sync_strt_wid = INREG(R128_FP_H_SYNC_STRT_WID); - save->fp_horz_stretch = INREG(R128_FP_HORZ_STRETCH); - save->fp_panel_cntl = INREG(R128_FP_PANEL_CNTL); - save->fp_v_sync_strt_wid = INREG(R128_FP_V_SYNC_STRT_WID); - save->fp_vert_stretch = INREG(R128_FP_VERT_STRETCH); - save->lvds_gen_cntl = INREG(R128_LVDS_GEN_CNTL); - save->tmds_crc = INREG(R128_TMDS_CRC); - save->tmds_transmitter_cntl = INREG(R128_TMDS_TRANSMITTER_CNTL); -} - -/* Read PLL registers. */ -static void R128SavePLLRegisters(ScrnInfoPtr pScrn, R128SavePtr save) -{ - save->ppll_ref_div = INPLL(pScrn, R128_PPLL_REF_DIV); - save->ppll_div_3 = INPLL(pScrn, R128_PPLL_DIV_3); - save->htotal_cntl = INPLL(pScrn, R128_HTOTAL_CNTL); - - R128TRACE(("Read: 0x%08x 0x%08x 0x%08x\n", - save->ppll_ref_div, - save->ppll_div_3, - save->htotal_cntl)); - R128TRACE(("Read: rd=%d, fd=%d, pd=%d\n", - save->ppll_ref_div & R128_PPLL_REF_DIV_MASK, - save->ppll_div_3 & R128_PPLL_FB3_DIV_MASK, - (save->ppll_div_3 & R128_PPLL_POST3_DIV_MASK) >> 16)); -} - -/* Read DDA registers. */ -static void R128SaveDDARegisters(ScrnInfoPtr pScrn, R128SavePtr save) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - - save->dda_config = INREG(R128_DDA_CONFIG); - save->dda_on_off = INREG(R128_DDA_ON_OFF); -} - -/* Read palette data. */ -static void R128SavePalette(ScrnInfoPtr pScrn, R128SavePtr save) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int i; - - /* Select palette 0 (main CRTC) if using FP-enabled chip */ - if (info->HasPanelRegs || info->isDFP) PAL_SELECT(0); - - INPAL_START(0); - for (i = 0; i < 256; i++) save->palette[i] = INPAL_NEXT(); - save->palette_valid = TRUE; -} - -/* Save state that defines current video mode. */ -static void R128SaveMode(ScrnInfoPtr pScrn, R128SavePtr save) -{ - R128TRACE(("R128SaveMode(%p)\n", save)); - - R128SaveCommonRegisters(pScrn, save); - R128SaveCrtcRegisters(pScrn, save); - if (R128PTR(pScrn)->HasPanelRegs || R128PTR(pScrn)->isDFP) - R128SaveFPRegisters(pScrn, save); - R128SavePLLRegisters(pScrn, save); - R128SaveDDARegisters(pScrn, save); - R128SavePalette(pScrn, save); - - R128TRACE(("R128SaveMode returns %p\n", save)); -} - -/* Save everything needed to restore the original VC state. */ -static void R128Save(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - R128SavePtr save = &info->SavedReg; - vgaHWPtr hwp = VGAHWPTR(pScrn); - - R128TRACE(("R128Save\n")); - if (info->FBDev) { - fbdevHWSave(pScrn); - return; - } - vgaHWUnlock(hwp); - vgaHWSave(pScrn, &hwp->SavedReg, VGA_SR_ALL); /* save mode, fonts, cmap */ - vgaHWLock(hwp); - - R128SaveMode(pScrn, save); - - save->dp_datatype = INREG(R128_DP_DATATYPE); - save->gen_reset_cntl = INREG(R128_GEN_RESET_CNTL); - save->clock_cntl_index = INREG(R128_CLOCK_CNTL_INDEX); - save->amcgpio_en_reg = INREG(R128_AMCGPIO_EN_REG); - save->amcgpio_mask = INREG(R128_AMCGPIO_MASK); -} - -/* Restore the original (text) mode. */ -static void R128Restore(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - R128SavePtr restore = &info->SavedReg; - vgaHWPtr hwp = VGAHWPTR(pScrn); - - R128TRACE(("R128Restore\n")); - if (info->FBDev) { - fbdevHWRestore(pScrn); - return; - } - - R128Blank(pScrn); - OUTREG(R128_AMCGPIO_MASK, restore->amcgpio_mask); - OUTREG(R128_AMCGPIO_EN_REG, restore->amcgpio_en_reg); - OUTREG(R128_CLOCK_CNTL_INDEX, restore->clock_cntl_index); - OUTREG(R128_GEN_RESET_CNTL, restore->gen_reset_cntl); - OUTREG(R128_DP_DATATYPE, restore->dp_datatype); - - R128RestoreMode(pScrn, restore); - vgaHWUnlock(hwp); - vgaHWRestore(pScrn, &hwp->SavedReg, VGA_SR_MODE | VGA_SR_FONTS ); - vgaHWLock(hwp); - - R128WaitForVerticalSync(pScrn); - R128Unblank(pScrn); -} - -/* Define common registers for requested video mode. */ -static void R128InitCommonRegisters(R128SavePtr save, R128InfoPtr info) -{ - save->ovr_clr = 0; - save->ovr_wid_left_right = 0; - save->ovr_wid_top_bottom = 0; - save->ov0_scale_cntl = 0; - save->mpp_tb_config = 0; - save->mpp_gp_config = 0; - save->subpic_cntl = 0; - save->viph_control = 0; - save->i2c_cntl_1 = 0; -#ifdef XF86DRI - save->gen_int_cntl = info->gen_int_cntl; -#else - save->gen_int_cntl = 0; -#endif - save->cap0_trig_cntl = 0; - save->cap1_trig_cntl = 0; - save->bus_cntl = info->BusCntl; - /* - * If bursts are enabled, turn on discards and aborts - */ - if (save->bus_cntl & (R128_BUS_WRT_BURST|R128_BUS_READ_BURST)) - save->bus_cntl |= R128_BUS_RD_DISCARD_EN | R128_BUS_RD_ABORT_EN; -} - -/* Define CRTC registers for requested video mode. */ -static Bool R128InitCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr save, - DisplayModePtr mode, R128InfoPtr info) -{ - int format; - int hsync_start; - int hsync_wid; - int hsync_fudge; - int vsync_wid; - int bytpp; - int hsync_fudge_default[] = { 0x00, 0x12, 0x09, 0x09, 0x06, 0x05 }; - int hsync_fudge_fp[] = { 0x12, 0x11, 0x09, 0x09, 0x05, 0x05 }; - int hsync_fudge_fp_crt[] = { 0x12, 0x10, 0x08, 0x08, 0x04, 0x04 }; - - switch (info->CurrentLayout.pixel_code) { - case 4: format = 1; bytpp = 0; break; - case 8: format = 2; bytpp = 1; break; - case 15: format = 3; bytpp = 2; break; /* 555 */ - case 16: format = 4; bytpp = 2; break; /* 565 */ - case 24: format = 5; bytpp = 3; break; /* RGB */ - case 32: format = 6; bytpp = 4; break; /* xRGB */ - default: - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Unsupported pixel depth (%d)\n", - info->CurrentLayout.bitsPerPixel); - return FALSE; - } - R128TRACE(("Format = %d (%d bytes per pixel)\n", format, bytpp)); - - switch (info->BIOSDisplay) { - case R128_BIOS_DISPLAY_FP: - hsync_fudge = hsync_fudge_fp[format-1]; - break; - case R128_BIOS_DISPLAY_FP_CRT: - hsync_fudge = hsync_fudge_fp_crt[format-1]; - break; - case R128_BIOS_DISPLAY_CRT: - default: - hsync_fudge = hsync_fudge_default[format-1]; - break; - } - - save->crtc_gen_cntl = (R128_CRTC_EXT_DISP_EN - | R128_CRTC_EN - | (format << 8) - | ((mode->Flags & V_DBLSCAN) - ? R128_CRTC_DBL_SCAN_EN - : 0) - | ((mode->Flags & V_INTERLACE) - ? R128_CRTC_INTERLACE_EN - : 0) - | ((mode->Flags & V_CSYNC) - ? R128_CRTC_CSYNC_EN - : 0)); - - save->crtc_ext_cntl = R128_VGA_ATI_LINEAR | R128_XCRT_CNT_EN; - save->dac_cntl = (R128_DAC_MASK_ALL - | R128_DAC_VGA_ADR_EN - | (info->dac6bits ? 0 : R128_DAC_8BIT_EN)); - - - if(info->isDFP && !info->isPro2) - { - if(info->PanelXRes < mode->CrtcHDisplay) - mode->HDisplay = mode->CrtcHDisplay = info->PanelXRes; - if(info->PanelYRes < mode->CrtcVDisplay) - mode->VDisplay = mode->CrtcVDisplay = info->PanelYRes; - mode->CrtcHTotal = mode->CrtcHDisplay + info->HBlank; - mode->CrtcHSyncStart = mode->CrtcHDisplay + info->HOverPlus; - mode->CrtcHSyncEnd = mode->CrtcHSyncStart + info->HSyncWidth; - mode->CrtcVTotal = mode->CrtcVDisplay + info->VBlank; - mode->CrtcVSyncStart = mode->CrtcVDisplay + info->VOverPlus; - mode->CrtcVSyncEnd = mode->CrtcVSyncStart + info->VSyncWidth; - } - - save->crtc_h_total_disp = ((((mode->CrtcHTotal / 8) - 1) & 0xffff) - | (((mode->CrtcHDisplay / 8) - 1) << 16)); - - hsync_wid = (mode->CrtcHSyncEnd - mode->CrtcHSyncStart) / 8; - if (!hsync_wid) hsync_wid = 1; - if (hsync_wid > 0x3f) hsync_wid = 0x3f; - - hsync_start = mode->CrtcHSyncStart - 8 + hsync_fudge; - - save->crtc_h_sync_strt_wid = ((hsync_start & 0xfff) - | (hsync_wid << 16) - | ((mode->Flags & V_NHSYNC) - ? R128_CRTC_H_SYNC_POL - : 0)); - -#if 1 - /* This works for double scan mode. */ - save->crtc_v_total_disp = (((mode->CrtcVTotal - 1) & 0xffff) - | ((mode->CrtcVDisplay - 1) << 16)); -#else - /* This is what cce/nbmode.c example code - does -- is this correct? */ - save->crtc_v_total_disp = (((mode->CrtcVTotal - 1) & 0xffff) - | ((mode->CrtcVDisplay - * ((mode->Flags & V_DBLSCAN) ? 2 : 1) - 1) - << 16)); -#endif - - vsync_wid = mode->CrtcVSyncEnd - mode->CrtcVSyncStart; - if (!vsync_wid) vsync_wid = 1; - if (vsync_wid > 0x1f) vsync_wid = 0x1f; - - save->crtc_v_sync_strt_wid = (((mode->CrtcVSyncStart - 1) & 0xfff) - | (vsync_wid << 16) - | ((mode->Flags & V_NVSYNC) - ? R128_CRTC_V_SYNC_POL - : 0)); - save->crtc_offset = 0; - save->crtc_offset_cntl = 0; - save->crtc_pitch = info->CurrentLayout.displayWidth / 8; - - R128TRACE(("Pitch = %d bytes (virtualX = %d, displayWidth = %d)\n", - save->crtc_pitch, pScrn->virtualX, info->CurrentLayout.displayWidth)); - -#if X_BYTE_ORDER == X_BIG_ENDIAN - /* Change the endianness of the aperture */ - switch (info->CurrentLayout.pixel_code) { - case 15: - case 16: save->config_cntl |= APER_0_BIG_ENDIAN_16BPP_SWAP; break; - case 32: save->config_cntl |= APER_0_BIG_ENDIAN_32BPP_SWAP; break; - default: break; - } -#endif - - return TRUE; -} - -/* Define CRTC registers for requested video mode. */ -static void R128InitFPRegisters(R128SavePtr orig, R128SavePtr save, - DisplayModePtr mode, R128InfoPtr info) -{ - int xres = mode->CrtcHDisplay; - int yres = mode->CrtcVDisplay; - float Hratio, Vratio; - - if (info->BIOSDisplay == R128_BIOS_DISPLAY_CRT) { - save->crtc_ext_cntl |= R128_CRTC_CRT_ON; - save->crtc2_gen_cntl = 0; - save->fp_gen_cntl = orig->fp_gen_cntl; - save->fp_gen_cntl &= ~(R128_FP_FPON | - R128_FP_CRTC_USE_SHADOW_VEND | - R128_FP_CRTC_HORZ_DIV2_EN | - R128_FP_CRTC_HOR_CRT_DIV2_DIS | - R128_FP_USE_SHADOW_EN); - save->fp_gen_cntl |= (R128_FP_SEL_CRTC2 | - R128_FP_CRTC_DONT_SHADOW_VPAR); - save->fp_panel_cntl = orig->fp_panel_cntl & (CARD32)~R128_FP_DIGON; - save->lvds_gen_cntl = orig->lvds_gen_cntl & - (CARD32)~(R128_LVDS_ON | R128_LVDS_BLON); - return; - } - - if (xres > info->PanelXRes) xres = info->PanelXRes; - if (yres > info->PanelYRes) yres = info->PanelYRes; - - Hratio = (float)xres/(float)info->PanelXRes; - Vratio = (float)yres/(float)info->PanelYRes; - - save->fp_horz_stretch = - (((((int)(Hratio * R128_HORZ_STRETCH_RATIO_MAX + 0.5)) - & R128_HORZ_STRETCH_RATIO_MASK) << R128_HORZ_STRETCH_RATIO_SHIFT) | - (orig->fp_horz_stretch & (R128_HORZ_PANEL_SIZE | - R128_HORZ_FP_LOOP_STRETCH | - R128_HORZ_STRETCH_RESERVED))); - save->fp_horz_stretch &= ~R128_HORZ_AUTO_RATIO_FIX_EN; - save->fp_horz_stretch &= ~R128_AUTO_HORZ_RATIO; - if (xres == info->PanelXRes) - save->fp_horz_stretch &= ~(R128_HORZ_STRETCH_BLEND | R128_HORZ_STRETCH_ENABLE); - else - save->fp_horz_stretch |= (R128_HORZ_STRETCH_BLEND | R128_HORZ_STRETCH_ENABLE); - - save->fp_vert_stretch = - (((((int)(Vratio * R128_VERT_STRETCH_RATIO_MAX + 0.5)) - & R128_VERT_STRETCH_RATIO_MASK) << R128_VERT_STRETCH_RATIO_SHIFT) | - (orig->fp_vert_stretch & (R128_VERT_PANEL_SIZE | - R128_VERT_STRETCH_RESERVED))); - save->fp_vert_stretch &= ~R128_VERT_AUTO_RATIO_EN; - if (yres == info->PanelYRes) - save->fp_vert_stretch &= ~(R128_VERT_STRETCH_ENABLE | R128_VERT_STRETCH_BLEND); - else - save->fp_vert_stretch |= (R128_VERT_STRETCH_ENABLE | R128_VERT_STRETCH_BLEND); - - save->fp_gen_cntl = (orig->fp_gen_cntl & - (CARD32)~(R128_FP_SEL_CRTC2 | - R128_FP_CRTC_USE_SHADOW_VEND | - R128_FP_CRTC_HORZ_DIV2_EN | - R128_FP_CRTC_HOR_CRT_DIV2_DIS | - R128_FP_USE_SHADOW_EN)); - - save->fp_panel_cntl = orig->fp_panel_cntl; - save->lvds_gen_cntl = orig->lvds_gen_cntl; - save->tmds_crc = orig->tmds_crc; - - /* Disable CRT output by disabling CRT output and setting the CRT - DAC to use CRTC2, which we set to 0's. In the future, we will - want to use the dual CRTC capabilities of the R128 to allow both - the flat panel and external CRT to either simultaneously display - the same image or display two different images. */ - - if(!info->isDFP){ - if (info->BIOSDisplay == R128_BIOS_DISPLAY_FP_CRT) { - save->crtc_ext_cntl |= R128_CRTC_CRT_ON; - } else { - save->crtc_ext_cntl &= ~R128_CRTC_CRT_ON; - save->dac_cntl |= R128_DAC_CRT_SEL_CRTC2; - save->crtc2_gen_cntl = 0; - } - } - - /* WARNING: Be careful about turning on the flat panel */ - if(info->isDFP){ - save->fp_gen_cntl = orig->fp_gen_cntl; - - save->fp_gen_cntl &= ~(R128_FP_CRTC_USE_SHADOW_VEND | - R128_FP_CRTC_USE_SHADOW_ROWCUR | - R128_FP_CRTC_HORZ_DIV2_EN | - R128_FP_CRTC_HOR_CRT_DIV2_DIS | - R128_FP_CRT_SYNC_SEL | - R128_FP_USE_SHADOW_EN); - - save->fp_panel_cntl |= (R128_FP_DIGON | R128_FP_BLON); - save->fp_gen_cntl |= (R128_FP_FPON | R128_FP_TDMS_EN | - R128_FP_CRTC_DONT_SHADOW_VPAR | R128_FP_CRTC_DONT_SHADOW_HEND); - save->tmds_transmitter_cntl = (orig->tmds_transmitter_cntl - & ~(CARD32)R128_TMDS_PLLRST) | R128_TMDS_PLLEN; - } - else - save->lvds_gen_cntl |= (R128_LVDS_ON | R128_LVDS_BLON); - - save->fp_crtc_h_total_disp = save->crtc_h_total_disp; - save->fp_crtc_v_total_disp = save->crtc_v_total_disp; - save->fp_h_sync_strt_wid = save->crtc_h_sync_strt_wid; - save->fp_v_sync_strt_wid = save->crtc_v_sync_strt_wid; -} - -/* Define PLL registers for requested video mode. */ -static void R128InitPLLRegisters(ScrnInfoPtr pScrn, R128SavePtr save, - R128PLLPtr pll, double dot_clock) -{ - unsigned long freq = dot_clock * 100; - struct { - int divider; - int bitvalue; - } *post_div, - post_divs[] = { - /* From RAGE 128 VR/RAGE 128 GL Register - Reference Manual (Technical Reference - Manual P/N RRG-G04100-C Rev. 0.04), page - 3-17 (PLL_DIV_[3:0]). */ - { 1, 0 }, /* VCLK_SRC */ - { 2, 1 }, /* VCLK_SRC/2 */ - { 4, 2 }, /* VCLK_SRC/4 */ - { 8, 3 }, /* VCLK_SRC/8 */ - - { 3, 4 }, /* VCLK_SRC/3 */ - /* bitvalue = 5 is reserved */ - { 6, 6 }, /* VCLK_SRC/6 */ - { 12, 7 }, /* VCLK_SRC/12 */ - { 0, 0 } - }; - - if (freq > pll->max_pll_freq) freq = pll->max_pll_freq; - if (freq * 12 < pll->min_pll_freq) freq = pll->min_pll_freq / 12; - - for (post_div = &post_divs[0]; post_div->divider; ++post_div) { - save->pll_output_freq = post_div->divider * freq; - if (save->pll_output_freq >= pll->min_pll_freq - && save->pll_output_freq <= pll->max_pll_freq) break; - } - - save->dot_clock_freq = freq; - save->feedback_div = R128Div(pll->reference_div * save->pll_output_freq, - pll->reference_freq); - save->post_div = post_div->divider; - - R128TRACE(("dc=%d, of=%d, fd=%d, pd=%d\n", - save->dot_clock_freq, - save->pll_output_freq, - save->feedback_div, - save->post_div)); - - save->ppll_ref_div = pll->reference_div; - save->ppll_div_3 = (save->feedback_div | (post_div->bitvalue << 16)); - save->htotal_cntl = 0; - -} - -/* Define DDA registers for requested video mode. */ -static Bool R128InitDDARegisters(ScrnInfoPtr pScrn, R128SavePtr save, - R128PLLPtr pll, R128InfoPtr info, - DisplayModePtr mode) -{ - int DisplayFifoWidth = 128; - int DisplayFifoDepth = 32; - int XclkFreq; - int VclkFreq; - int XclksPerTransfer; - int XclksPerTransferPrecise; - int UseablePrecision; - int Roff; - int Ron; - - XclkFreq = pll->xclk; - - VclkFreq = R128Div(pll->reference_freq * save->feedback_div, - pll->reference_div * save->post_div); - - if(info->isDFP && !info->isPro2){ - if(info->PanelXRes != mode->CrtcHDisplay) - VclkFreq = (VclkFreq * mode->CrtcHDisplay)/info->PanelXRes; - } - - XclksPerTransfer = R128Div(XclkFreq * DisplayFifoWidth, - VclkFreq * (info->CurrentLayout.pixel_bytes * 8)); - - UseablePrecision = R128MinBits(XclksPerTransfer) + 1; - - XclksPerTransferPrecise = R128Div((XclkFreq * DisplayFifoWidth) - << (11 - UseablePrecision), - VclkFreq * (info->CurrentLayout.pixel_bytes * 8)); - - Roff = XclksPerTransferPrecise * (DisplayFifoDepth - 4); - - Ron = (4 * info->ram->MB - + 3 * MAX(info->ram->Trcd - 2, 0) - + 2 * info->ram->Trp - + info->ram->Twr - + info->ram->CL - + info->ram->Tr2w - + XclksPerTransfer) << (11 - UseablePrecision); - - if (Ron + info->ram->Rloop >= Roff) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "(Ron = %d) + (Rloop = %d) >= (Roff = %d)\n", - Ron, info->ram->Rloop, Roff); - return FALSE; - } - - save->dda_config = (XclksPerTransferPrecise - | (UseablePrecision << 16) - | (info->ram->Rloop << 20)); - - save->dda_on_off = (Ron << 16) | Roff; - - R128TRACE(("XclkFreq = %d; VclkFreq = %d; per = %d, %d (useable = %d)\n", - XclkFreq, - VclkFreq, - XclksPerTransfer, - XclksPerTransferPrecise, - UseablePrecision)); - R128TRACE(("Roff = %d, Ron = %d, Rloop = %d\n", - Roff, Ron, info->ram->Rloop)); - - return TRUE; -} - - -#if 0 -/* Define initial palette for requested video mode. This doesn't do - anything for XFree86 4.0. */ -static void R128InitPalette(R128SavePtr save) -{ - save->palette_valid = FALSE; -} -#endif - -/* Define registers for a requested video mode. */ -static Bool R128Init(ScrnInfoPtr pScrn, DisplayModePtr mode, R128SavePtr save) -{ - R128InfoPtr info = R128PTR(pScrn); - double dot_clock = mode->Clock/1000.0; - -#if R128_DEBUG - ErrorF("%-12.12s %7.2f %4d %4d %4d %4d %4d %4d %4d %4d (%d,%d)", - mode->name, - dot_clock, - - mode->HDisplay, - mode->HSyncStart, - mode->HSyncEnd, - mode->HTotal, - - mode->VDisplay, - mode->VSyncStart, - mode->VSyncEnd, - mode->VTotal, - pScrn->depth, - pScrn->bitsPerPixel); - if (mode->Flags & V_DBLSCAN) ErrorF(" D"); - if (mode->Flags & V_CSYNC) ErrorF(" C"); - if (mode->Flags & V_INTERLACE) ErrorF(" I"); - if (mode->Flags & V_PHSYNC) ErrorF(" +H"); - if (mode->Flags & V_NHSYNC) ErrorF(" -H"); - if (mode->Flags & V_PVSYNC) ErrorF(" +V"); - if (mode->Flags & V_NVSYNC) ErrorF(" -V"); - ErrorF("\n"); - ErrorF("%-12.12s %7.2f %4d %4d %4d %4d %4d %4d %4d %4d (%d,%d)", - mode->name, - dot_clock, - - mode->CrtcHDisplay, - mode->CrtcHSyncStart, - mode->CrtcHSyncEnd, - mode->CrtcHTotal, - - mode->CrtcVDisplay, - mode->CrtcVSyncStart, - mode->CrtcVSyncEnd, - mode->CrtcVTotal, - pScrn->depth, - pScrn->bitsPerPixel); - if (mode->Flags & V_DBLSCAN) ErrorF(" D"); - if (mode->Flags & V_CSYNC) ErrorF(" C"); - if (mode->Flags & V_INTERLACE) ErrorF(" I"); - if (mode->Flags & V_PHSYNC) ErrorF(" +H"); - if (mode->Flags & V_NHSYNC) ErrorF(" -H"); - if (mode->Flags & V_PVSYNC) ErrorF(" +V"); - if (mode->Flags & V_NVSYNC) ErrorF(" -V"); - ErrorF("\n"); -#endif - - info->Flags = mode->Flags; - - R128InitCommonRegisters(save, info); - if (!R128InitCrtcRegisters(pScrn, save, mode, info)) return FALSE; - if (info->HasPanelRegs || info->isDFP) - R128InitFPRegisters(&info->SavedReg, save, mode, info); - if(dot_clock > 0){ - R128InitPLLRegisters(pScrn, save, &info->pll, dot_clock); - if (!R128InitDDARegisters(pScrn, save, &info->pll, info, mode)) - return FALSE; - } - else{ - save->ppll_ref_div = info->SavedReg.ppll_ref_div; - save->ppll_div_3 = info->SavedReg.ppll_div_3; - save->htotal_cntl = info->SavedReg.htotal_cntl; - save->dda_config = info->SavedReg.dda_config; - save->dda_on_off = info->SavedReg.dda_on_off; - } - - R128TRACE(("R128Init returns %p\n", save)); - return TRUE; -} - -/* Initialize a new mode. */ -static Bool R128ModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode) -{ - R128InfoPtr info = R128PTR(pScrn); - - if (!R128Init(pScrn, mode, &info->ModeReg)) return FALSE; - /* FIXME? DRILock/DRIUnlock here? */ - pScrn->vtSema = TRUE; - R128Blank(pScrn); - R128RestoreMode(pScrn, &info->ModeReg); - R128Unblank(pScrn); - - info->CurrentLayout.mode = mode; - - return TRUE; -} - -static Bool R128SaveScreen(ScreenPtr pScreen, int mode) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - Bool unblank; - - unblank = xf86IsUnblank(mode); - if (unblank) - SetTimeSinceLastInputEvent(); - - if ((pScrn != NULL) && pScrn->vtSema) { - if (unblank) - R128Unblank(pScrn); - else - R128Blank(pScrn); - } - return TRUE; -} - -Bool R128SwitchMode(int scrnIndex, DisplayModePtr mode, int flags) -{ - return R128ModeInit(xf86Screens[scrnIndex], mode); -} - -/* Used to disallow modes that are not supported by the hardware. */ -int R128ValidMode(int scrnIndex, DisplayModePtr mode, - Bool verbose, int flag) -{ - ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; - R128InfoPtr info = R128PTR(pScrn); - - if(info->isDFP) { - if(info->PanelXRes < mode->CrtcHDisplay || - info->PanelYRes < mode->CrtcVDisplay) - return MODE_NOMODE; - else - return MODE_OK; - } - - if (info->HasPanelRegs) { - if (mode->Flags & V_INTERLACE) return MODE_NO_INTERLACE; - if (mode->Flags & V_DBLSCAN) return MODE_NO_DBLESCAN; - } - - if (info->HasPanelRegs && - info->BIOSDisplay != R128_BIOS_DISPLAY_CRT && - info->VBIOS) { - int i; - for (i = info->FPBIOSstart+64; R128_BIOS16(i) != 0; i += 2) { - int j = R128_BIOS16(i); - - if (mode->CrtcHDisplay == R128_BIOS16(j) && - mode->CrtcVDisplay == R128_BIOS16(j+2)) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Modifying mode according to VBIOS: %ix%i [pclk %.1f MHz] for FP to: ", - mode->CrtcHDisplay,mode->CrtcVDisplay, - (float)mode->Clock/1000); - - /* Assume we are using expanded mode */ - if (R128_BIOS16(j+5)) j = R128_BIOS16(j+5); - else j += 9; - - mode->Clock = (CARD32)R128_BIOS16(j) * 10; - - mode->HDisplay = mode->CrtcHDisplay = - ((R128_BIOS16(j+10) & 0x01ff)+1)*8; - mode->HSyncStart = mode->CrtcHSyncStart = - ((R128_BIOS16(j+12) & 0x01ff)+1)*8; - mode->HSyncEnd = mode->CrtcHSyncEnd = - mode->CrtcHSyncStart + (R128_BIOS8(j+14) & 0x1f); - mode->HTotal = mode->CrtcHTotal = - ((R128_BIOS16(j+8) & 0x01ff)+1)*8; - - mode->VDisplay = mode->CrtcVDisplay = - (R128_BIOS16(j+17) & 0x07ff)+1; - mode->VSyncStart = mode->CrtcVSyncStart = - (R128_BIOS16(j+19) & 0x07ff)+1; - mode->VSyncEnd = mode->CrtcVSyncEnd = - mode->CrtcVSyncStart + ((R128_BIOS16(j+19) >> 11) & 0x1f); - mode->VTotal = mode->CrtcVTotal = - (R128_BIOS16(j+15) & 0x07ff)+1; - xf86ErrorF("%ix%i [pclk %.1f MHz]\n", - mode->CrtcHDisplay,mode->CrtcVDisplay, - (float)mode->Clock/1000); - - return MODE_OK; - } - } - xf86DrvMsgVerb(5,pScrn->scrnIndex, X_INFO, - "Mode rejected for FP %ix%i [pclk: %.1f] " - "(not listed in VBIOS)\n", - mode->CrtcHDisplay, mode->CrtcVDisplay, - mode->Clock / 1000); - return MODE_NOMODE; - } - - return MODE_OK; -} - -/* Adjust viewport into virtual desktop such that (0,0) in viewport space - is (x,y) in virtual space. */ -void R128AdjustFrame(int scrnIndex, int x, int y, int flags) -{ - ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int Base; - - if(info->showCache && y && pScrn->vtSema) - y += pScrn->virtualY - 1; - - Base = y * info->CurrentLayout.displayWidth + x; - - switch (info->CurrentLayout.pixel_code) { - case 15: - case 16: Base *= 2; break; - case 24: Base *= 3; break; - case 32: Base *= 4; break; - } - - Base &= ~7; /* 3 lower bits are always 0 */ - - if (info->CurrentLayout.pixel_code == 24) - Base += 8 * (Base % 3); /* Must be multiple of 8 and 3 */ - - OUTREG(R128_CRTC_OFFSET, Base); -} - -/* Called when VT switching back to the X server. Reinitialize the video - mode. */ -Bool R128EnterVT(int scrnIndex, int flags) -{ - ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; - R128InfoPtr info = R128PTR(pScrn); - - R128TRACE(("R128EnterVT\n")); - if (info->FBDev) { - if (!fbdevHWEnterVT(scrnIndex,flags)) return FALSE; - } else - if (!R128ModeInit(pScrn, pScrn->currentMode)) return FALSE; - if (info->accelOn) - R128EngineInit(pScrn); - -#ifdef XF86DRI - if (info->directRenderingEnabled) { - if (info->irq) { - /* Need to make sure interrupts are enabled */ - unsigned char *R128MMIO = info->MMIO; - OUTREG(R128_GEN_INT_CNTL, info->gen_int_cntl); - } - R128CCE_START(pScrn, info); - DRIUnlock(pScrn->pScreen); - } -#endif - - info->PaletteSavedOnVT = FALSE; - pScrn->AdjustFrame(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0); - - return TRUE; -} - -/* Called when VT switching away from the X server. Restore the original - text mode. */ -void R128LeaveVT(int scrnIndex, int flags) -{ - ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; - R128InfoPtr info = R128PTR(pScrn); - R128SavePtr save = &info->ModeReg; - - R128TRACE(("R128LeaveVT\n")); -#ifdef XF86DRI - if (info->directRenderingEnabled) { - DRILock(pScrn->pScreen, 0); - R128CCE_STOP(pScrn, info); - } -#endif - R128SavePalette(pScrn, save); - info->PaletteSavedOnVT = TRUE; - if (info->FBDev) - fbdevHWLeaveVT(scrnIndex,flags); - else - R128Restore(pScrn); -} - - -/* Called at the end of each server generation. Restore the original text - mode, unmap video memory, and unwrap and call the saved CloseScreen - function. */ -static Bool R128CloseScreen(int scrnIndex, ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; - R128InfoPtr info = R128PTR(pScrn); - - R128TRACE(("R128CloseScreen\n")); - -#ifdef XF86DRI - /* Disable direct rendering */ - if (info->directRenderingEnabled) { - R128DRICloseScreen(pScreen); - info->directRenderingEnabled = FALSE; - } -#endif - - if (pScrn->vtSema) { - R128Restore(pScrn); - R128UnmapMem(pScrn); - } - - if (info->accel) XAADestroyInfoRec(info->accel); - info->accel = NULL; - - if (info->scratch_save) xfree(info->scratch_save); - info->scratch_save = NULL; - - if (info->cursor) xf86DestroyCursorInfoRec(info->cursor); - info->cursor = NULL; - - if (info->DGAModes) xfree(info->DGAModes); - info->DGAModes = NULL; - - if (info->adaptor) { - xfree(info->adaptor->pPortPrivates[0].ptr); - xf86XVFreeVideoAdaptorRec(info->adaptor); - info->adaptor = NULL; - } - - pScrn->vtSema = FALSE; - - pScreen->BlockHandler = info->BlockHandler; - pScreen->CloseScreen = info->CloseScreen; - return (*pScreen->CloseScreen)(scrnIndex, pScreen); -} - -void R128FreeScreen(int scrnIndex, int flags) -{ - ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; - - R128TRACE(("R128FreeScreen\n")); - if (xf86LoaderCheckSymbol("vgaHWFreeHWRec")) - vgaHWFreeHWRec(pScrn); - R128FreeRec(pScrn); -} - -/* Sets VESA Display Power Management Signaling (DPMS) Mode. */ -static void R128DisplayPowerManagementSet(ScrnInfoPtr pScrn, - int PowerManagementMode, int flags) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int mask = (R128_CRTC_DISPLAY_DIS - | R128_CRTC_HSYNC_DIS - | R128_CRTC_VSYNC_DIS); - - switch (PowerManagementMode) { - case DPMSModeOn: - /* Screen: On; HSync: On, VSync: On */ - OUTREGP(R128_CRTC_EXT_CNTL, 0, ~mask); - break; - case DPMSModeStandby: - /* Screen: Off; HSync: Off, VSync: On */ - OUTREGP(R128_CRTC_EXT_CNTL, - R128_CRTC_DISPLAY_DIS | R128_CRTC_HSYNC_DIS, ~mask); - break; - case DPMSModeSuspend: - /* Screen: Off; HSync: On, VSync: Off */ - OUTREGP(R128_CRTC_EXT_CNTL, - R128_CRTC_DISPLAY_DIS | R128_CRTC_VSYNC_DIS, ~mask); - break; - case DPMSModeOff: - /* Screen: Off; HSync: Off, VSync: Off */ - OUTREGP(R128_CRTC_EXT_CNTL, mask, ~mask); - break; - } -} - -static int r128_set_backlight_enable(ScrnInfoPtr pScrn, int on); - -static void R128DisplayPowerManagementSetLCD(ScrnInfoPtr pScrn, - int PowerManagementMode, int flags) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int mask = R128_LVDS_DISPLAY_DIS; - - switch (PowerManagementMode) { - case DPMSModeOn: - /* Screen: On; HSync: On, VSync: On */ - OUTREGP(R128_LVDS_GEN_CNTL, 0, ~mask); - r128_set_backlight_enable(pScrn, 1); - break; - case DPMSModeStandby: - /* Fall through */ - case DPMSModeSuspend: - /* Fall through */ - break; - case DPMSModeOff: - /* Screen: Off; HSync: Off, VSync: Off */ - OUTREGP(R128_LVDS_GEN_CNTL, mask, ~mask); - r128_set_backlight_enable(pScrn, 0); - break; - } -} - -static int r128_set_backlight_enable(ScrnInfoPtr pScrn, int on) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - unsigned int lvds_gen_cntl = INREG(R128_LVDS_GEN_CNTL); - - lvds_gen_cntl |= (/*R128_LVDS_BL_MOD_EN |*/ R128_LVDS_BLON); - if (on) { - lvds_gen_cntl |= R128_LVDS_DIGON; - if (!lvds_gen_cntl & R128_LVDS_ON) { - lvds_gen_cntl &= ~R128_LVDS_BLON; - OUTREG(R128_LVDS_GEN_CNTL, lvds_gen_cntl); - (void)INREG(R128_LVDS_GEN_CNTL); - usleep(10000); - lvds_gen_cntl |= R128_LVDS_BLON; - OUTREG(R128_LVDS_GEN_CNTL, lvds_gen_cntl); - } -#if 0 - lvds_gen_cntl &= ~R128_LVDS_BL_MOD_LEVEL_MASK; - lvds_gen_cntl |= (0xFF /* backlight_conv[level] */ << - R128_LVDS_BL_MOD_LEVEL_SHIFT); -#endif - lvds_gen_cntl |= (R128_LVDS_ON | R128_LVDS_EN); - lvds_gen_cntl &= ~R128_LVDS_DISPLAY_DIS; - } else { -#if 0 - lvds_gen_cntl &= ~R128_LVDS_BL_MOD_LEVEL_MASK; - lvds_gen_cntl |= (0xFF /* backlight_conv[0] */ << - R128_LVDS_BL_MOD_LEVEL_SHIFT); -#endif - lvds_gen_cntl |= R128_LVDS_DISPLAY_DIS; - OUTREG(R128_LVDS_GEN_CNTL, lvds_gen_cntl); - usleep(10); - lvds_gen_cntl &= ~(R128_LVDS_ON | R128_LVDS_EN | R128_LVDS_BLON - | R128_LVDS_DIGON); - } - - OUTREG(R128_LVDS_GEN_CNTL, lvds_gen_cntl); - - return 0; - } diff --git a/src/r128_misc.c b/src/r128_misc.c deleted file mode 100644 index 8841f34b..00000000 --- a/src/r128_misc.c +++ /dev/null @@ -1,87 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_misc.c,v 1.5 2003/01/01 19:16:35 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifdef XFree86LOADER - -#include "ativersion.h" - -#include "r128_probe.h" -#include "r128_version.h" - -#include "xf86.h" - -/* Module loader interface for subsidiary driver module */ - -static XF86ModuleVersionInfo R128VersionRec = -{ - R128_DRIVER_NAME, - MODULEVENDORSTRING, - MODINFOSTRING1, - MODINFOSTRING2, - XF86_VERSION_CURRENT, - R128_VERSION_MAJOR, R128_VERSION_MINOR, R128_VERSION_PATCH, - ABI_CLASS_VIDEODRV, - ABI_VIDEODRV_VERSION, - MOD_CLASS_VIDEODRV, - {0, 0, 0, 0} -}; - -/* - * R128Setup -- - * - * This function is called every time the module is loaded. - */ -static pointer -R128Setup -( - pointer Module, - pointer Options, - int *ErrorMajor, - int *ErrorMinor -) -{ - static Bool Inited = FALSE; - - if (!Inited) - { - /* Ensure main driver module is loaded, but not as a submodule */ - if (!xf86ServerIsOnlyDetecting() && !LoaderSymbol(ATI_NAME)) - xf86LoadOneModule(ATI_DRIVER_NAME, Options); - - R128LoaderRefSymLists(); - - Inited = TRUE; - } - - return (pointer)TRUE; -} - -/* The following record must be called r128ModuleData */ -XF86ModuleData r128ModuleData = -{ - &R128VersionRec, - R128Setup, - NULL -}; - -#endif /* XFree86LOADER */ diff --git a/src/r128_probe.c b/src/r128_probe.c deleted file mode 100644 index a5cd42fe..00000000 --- a/src/r128_probe.c +++ /dev/null @@ -1,308 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_probe.c,v 1.18 2003/02/09 15:33:17 tsi Exp $ */ -/* - * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, - * Precision Insight, Inc., Cedar Park, Texas, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX - * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Rickard E. Faith <faith@valinux.com> - * Kevin E. Martin <martin@valinux.com> - * - * Modified by Marc Aurele La France <tsi@xfree86.org> for ATI driver merge. - */ - -#include "atimodule.h" -#include "ativersion.h" - -#include "r128_probe.h" -#include "r128_version.h" - -#include "xf86PciInfo.h" - -#include "xf86.h" -#include "xf86_ansic.h" -#include "xf86Resources.h" - -#ifdef XFree86LOADER - -/* - * The following exists to prevent the compiler from considering entry points - * defined in a separate module from being constants. - */ -static xf86PreInitProc * const volatile PreInitProc = R128PreInit; -static xf86ScreenInitProc * const volatile ScreenInitProc = R128ScreenInit; -static xf86SwitchModeProc * const volatile SwitchModeProc = R128SwitchMode; -static xf86AdjustFrameProc * const volatile AdjustFrameProc = R128AdjustFrame; -static xf86EnterVTProc * const volatile EnterVTProc = R128EnterVT; -static xf86LeaveVTProc * const volatile LeaveVTProc = R128LeaveVT; -static xf86FreeScreenProc * const volatile FreeScreenProc = R128FreeScreen; -static xf86ValidModeProc * const volatile ValidModeProc = R128ValidMode; - -#define R128PreInit PreInitProc -#define R128ScreenInit ScreenInitProc -#define R128SwitchMode SwitchModeProc -#define R128AdjustFrame AdjustFrameProc -#define R128EnterVT EnterVTProc -#define R128LeaveVT LeaveVTProc -#define R128FreeScreen FreeScreenProc -#define R128ValidMode ValidModeProc - -#endif - -SymTabRec R128Chipsets[] = { - /* FIXME: The chipsets with (PCI/AGP) are not known wether they are AGP or - * PCI, so I've labeled them as such in hopes users will submit - * data if we're unable to gather it from official documentation - */ - { PCI_CHIP_RAGE128LE, "ATI Rage 128 Mobility M3 LE (PCI)" }, - { PCI_CHIP_RAGE128LF, "ATI Rage 128 Mobility M3 LF (AGP)" }, - { PCI_CHIP_RAGE128MF, "ATI Rage 128 Mobility M4 MF (AGP)" }, - { PCI_CHIP_RAGE128ML, "ATI Rage 128 Mobility M4 ML (AGP)" }, - { PCI_CHIP_RAGE128PA, "ATI Rage 128 Pro GL PA (PCI/AGP)" }, - { PCI_CHIP_RAGE128PB, "ATI Rage 128 Pro GL PB (PCI/AGP)" }, - { PCI_CHIP_RAGE128PC, "ATI Rage 128 Pro GL PC (PCI/AGP)" }, - { PCI_CHIP_RAGE128PD, "ATI Rage 128 Pro GL PD (PCI)" }, - { PCI_CHIP_RAGE128PE, "ATI Rage 128 Pro GL PE (PCI/AGP)" }, - { PCI_CHIP_RAGE128PF, "ATI Rage 128 Pro GL PF (AGP)" }, - { PCI_CHIP_RAGE128PG, "ATI Rage 128 Pro VR PG (PCI/AGP)" }, - { PCI_CHIP_RAGE128PH, "ATI Rage 128 Pro VR PH (PCI/AGP)" }, - { PCI_CHIP_RAGE128PI, "ATI Rage 128 Pro VR PI (PCI/AGP)" }, - { PCI_CHIP_RAGE128PJ, "ATI Rage 128 Pro VR PJ (PCI/AGP)" }, - { PCI_CHIP_RAGE128PK, "ATI Rage 128 Pro VR PK (PCI/AGP)" }, - { PCI_CHIP_RAGE128PL, "ATI Rage 128 Pro VR PL (PCI/AGP)" }, - { PCI_CHIP_RAGE128PM, "ATI Rage 128 Pro VR PM (PCI/AGP)" }, - { PCI_CHIP_RAGE128PN, "ATI Rage 128 Pro VR PN (PCI/AGP)" }, - { PCI_CHIP_RAGE128PO, "ATI Rage 128 Pro VR PO (PCI/AGP)" }, - { PCI_CHIP_RAGE128PP, "ATI Rage 128 Pro VR PP (PCI)" }, - { PCI_CHIP_RAGE128PQ, "ATI Rage 128 Pro VR PQ (PCI/AGP)" }, - { PCI_CHIP_RAGE128PR, "ATI Rage 128 Pro VR PR (PCI)" }, - { PCI_CHIP_RAGE128PS, "ATI Rage 128 Pro VR PS (PCI/AGP)" }, - { PCI_CHIP_RAGE128PT, "ATI Rage 128 Pro VR PT (PCI/AGP)" }, - { PCI_CHIP_RAGE128PU, "ATI Rage 128 Pro VR PU (PCI/AGP)" }, - { PCI_CHIP_RAGE128PV, "ATI Rage 128 Pro VR PV (PCI/AGP)" }, - { PCI_CHIP_RAGE128PW, "ATI Rage 128 Pro VR PW (PCI/AGP)" }, - { PCI_CHIP_RAGE128PX, "ATI Rage 128 Pro VR PX (PCI/AGP)" }, - { PCI_CHIP_RAGE128RE, "ATI Rage 128 GL RE (PCI)" }, - { PCI_CHIP_RAGE128RF, "ATI Rage 128 GL RF (AGP)" }, - { PCI_CHIP_RAGE128RG, "ATI Rage 128 RG (AGP)" }, - { PCI_CHIP_RAGE128RK, "ATI Rage 128 VR RK (PCI)" }, - { PCI_CHIP_RAGE128RL, "ATI Rage 128 VR RL (AGP)" }, - { PCI_CHIP_RAGE128SE, "ATI Rage 128 4X SE (PCI/AGP)" }, - { PCI_CHIP_RAGE128SF, "ATI Rage 128 4X SF (PCI/AGP)" }, - { PCI_CHIP_RAGE128SG, "ATI Rage 128 4X SG (PCI/AGP)" }, - { PCI_CHIP_RAGE128SH, "ATI Rage 128 4X SH (PCI/AGP)" }, - { PCI_CHIP_RAGE128SK, "ATI Rage 128 4X SK (PCI/AGP)" }, - { PCI_CHIP_RAGE128SL, "ATI Rage 128 4X SL (PCI/AGP)" }, - { PCI_CHIP_RAGE128SM, "ATI Rage 128 4X SM (AGP)" }, - { PCI_CHIP_RAGE128SN, "ATI Rage 128 4X SN (PCI/AGP)" }, - { PCI_CHIP_RAGE128TF, "ATI Rage 128 Pro ULTRA TF (AGP)" }, - { PCI_CHIP_RAGE128TL, "ATI Rage 128 Pro ULTRA TL (AGP)" }, - { PCI_CHIP_RAGE128TR, "ATI Rage 128 Pro ULTRA TR (AGP)" }, - { PCI_CHIP_RAGE128TS, "ATI Rage 128 Pro ULTRA TS (AGP?)" }, - { PCI_CHIP_RAGE128TT, "ATI Rage 128 Pro ULTRA TT (AGP?)" }, - { PCI_CHIP_RAGE128TU, "ATI Rage 128 Pro ULTRA TU (AGP?)" }, - { -1, NULL } -}; - -PciChipsets R128PciChipsets[] = { - { PCI_CHIP_RAGE128LE, PCI_CHIP_RAGE128LE, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128LF, PCI_CHIP_RAGE128LF, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128MF, PCI_CHIP_RAGE128MF, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128ML, PCI_CHIP_RAGE128ML, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PA, PCI_CHIP_RAGE128PA, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PB, PCI_CHIP_RAGE128PB, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PC, PCI_CHIP_RAGE128PC, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PD, PCI_CHIP_RAGE128PD, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PE, PCI_CHIP_RAGE128PE, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PF, PCI_CHIP_RAGE128PF, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PG, PCI_CHIP_RAGE128PG, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PH, PCI_CHIP_RAGE128PH, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PI, PCI_CHIP_RAGE128PI, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PJ, PCI_CHIP_RAGE128PJ, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PK, PCI_CHIP_RAGE128PK, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PL, PCI_CHIP_RAGE128PL, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PM, PCI_CHIP_RAGE128PM, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PN, PCI_CHIP_RAGE128PN, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PO, PCI_CHIP_RAGE128PO, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PP, PCI_CHIP_RAGE128PP, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PQ, PCI_CHIP_RAGE128PQ, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PR, PCI_CHIP_RAGE128PR, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PS, PCI_CHIP_RAGE128PS, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PT, PCI_CHIP_RAGE128PT, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PU, PCI_CHIP_RAGE128PU, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PV, PCI_CHIP_RAGE128PV, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PW, PCI_CHIP_RAGE128PW, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128PX, PCI_CHIP_RAGE128PX, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128RE, PCI_CHIP_RAGE128RE, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128RF, PCI_CHIP_RAGE128RF, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128RG, PCI_CHIP_RAGE128RG, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128RK, PCI_CHIP_RAGE128RK, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128RL, PCI_CHIP_RAGE128RL, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128SE, PCI_CHIP_RAGE128SE, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128SF, PCI_CHIP_RAGE128SF, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128SG, PCI_CHIP_RAGE128SG, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128SH, PCI_CHIP_RAGE128SH, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128SK, PCI_CHIP_RAGE128SK, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128SL, PCI_CHIP_RAGE128SL, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128SM, PCI_CHIP_RAGE128SM, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128SN, PCI_CHIP_RAGE128SN, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128TF, PCI_CHIP_RAGE128TF, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128TL, PCI_CHIP_RAGE128TL, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128TR, PCI_CHIP_RAGE128TR, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128TS, PCI_CHIP_RAGE128TS, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128TT, PCI_CHIP_RAGE128TT, RES_SHARED_VGA }, - { PCI_CHIP_RAGE128TU, PCI_CHIP_RAGE128TU, RES_SHARED_VGA }, - { -1, -1, RES_UNDEFINED } -}; - -/* Return the options for supported chipset 'n'; NULL otherwise */ -const OptionInfoRec * -R128AvailableOptions(int chipid, int busid) -{ - int i; - - /* - * Return options defined in the r128 submodule which will have been - * loaded by this point. - */ - if ((chipid >> 16) == PCI_VENDOR_ATI) - chipid -= PCI_VENDOR_ATI << 16; - for (i = 0; R128PciChipsets[i].PCIid > 0; i++) { - if (chipid == R128PciChipsets[i].PCIid) - return R128Options; - } - return NULL; -} - -/* Return the string name for supported chipset 'n'; NULL otherwise. */ -void -R128Identify(int flags) -{ - xf86PrintChipsets(R128_NAME, - "Driver for ATI Rage 128 chipsets", - R128Chipsets); -} - -/* Return TRUE if chipset is present; FALSE otherwise. */ -Bool -R128Probe(DriverPtr drv, int flags) -{ - int numUsed; - int numDevSections, nATIGDev, nR128GDev; - int *usedChips; - GDevPtr *devSections, *ATIGDevs, *R128GDevs; - EntityInfoPtr pEnt; - Bool foundScreen = FALSE; - int i; - - if (!xf86GetPciVideoInfo()) return FALSE; - - /* Collect unclaimed device sections for both driver names */ - nATIGDev = xf86MatchDevice(ATI_NAME, &ATIGDevs); - nR128GDev = xf86MatchDevice(R128_NAME, &R128GDevs); - - if (!(numDevSections = nATIGDev + nR128GDev)) return FALSE; - - if (!ATIGDevs) { - if (!(devSections = R128GDevs)) - numDevSections = 1; - else - numDevSections = nR128GDev; - } if (!R128GDevs) { - devSections = ATIGDevs; - numDevSections = nATIGDev; - } else { - /* Combine into one list */ - devSections = xnfalloc((numDevSections + 1) * sizeof(GDevPtr)); - (void)memcpy(devSections, - ATIGDevs, nATIGDev * sizeof(GDevPtr)); - (void)memcpy(devSections + nATIGDev, - R128GDevs, nR128GDev * sizeof(GDevPtr)); - devSections[numDevSections] = NULL; - xfree(ATIGDevs); - xfree(R128GDevs); - } - - numUsed = xf86MatchPciInstances(R128_NAME, - PCI_VENDOR_ATI, - R128Chipsets, - R128PciChipsets, - devSections, - numDevSections, - drv, - &usedChips); - - if (numUsed<=0) return FALSE; - - if (flags & PROBE_DETECT) - foundScreen = TRUE; - else for (i = 0; i < numUsed; i++) { - pEnt = xf86GetEntityInfo(usedChips[i]); - - if (pEnt->active) { - ScrnInfoPtr pScrn = xf86AllocateScreen(drv, 0); - -#ifdef XFree86LOADER - - if (!xf86LoadSubModule(pScrn, "r128")) { - xf86Msg(X_ERROR, - R128_NAME ": Failed to load \"r128\" module.\n"); - xf86DeleteScreen(pScrn->scrnIndex, 0); - continue; - } - - xf86LoaderReqSymLists(R128Symbols, NULL); - -#endif - - pScrn->driverVersion = R128_VERSION_CURRENT; - pScrn->driverName = R128_DRIVER_NAME; - pScrn->name = R128_NAME; - pScrn->Probe = R128Probe; - pScrn->PreInit = R128PreInit; - pScrn->ScreenInit = R128ScreenInit; - pScrn->SwitchMode = R128SwitchMode; - pScrn->AdjustFrame = R128AdjustFrame; - pScrn->EnterVT = R128EnterVT; - pScrn->LeaveVT = R128LeaveVT; - pScrn->FreeScreen = R128FreeScreen; - pScrn->ValidMode = R128ValidMode; - - foundScreen = TRUE; - - xf86ConfigActivePciEntity(pScrn, usedChips[i], R128PciChipsets, - 0, 0, 0, 0, 0); - } - xfree(pEnt); - } - - xfree(usedChips); - xfree(devSections); - - return foundScreen; -} diff --git a/src/r128_probe.h b/src/r128_probe.h deleted file mode 100644 index 094a9b69..00000000 --- a/src/r128_probe.h +++ /dev/null @@ -1,78 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_probe.h,v 1.6 2002/04/06 19:06:06 tsi Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@valinux.com> - * - * Modified by Marc Aurele La France <tsi@xfree86.org> for ATI driver merge. - */ - -#ifndef _R128_PROBE_H_ -#define _R128_PROBE_H_ 1 - -#include "atiproto.h" - -#include "xf86str.h" - -/* r128_probe.c */ -extern const OptionInfoRec * R128AvailableOptions - FunctionPrototype((int, int)); -extern void R128Identify - FunctionPrototype((int)); -extern Bool R128Probe - FunctionPrototype((DriverPtr, int)); - -extern SymTabRec R128Chipsets[]; -extern PciChipsets R128PciChipsets[]; - -/* r128_driver.c */ -extern void R128LoaderRefSymLists - FunctionPrototype((void)); -extern Bool R128PreInit - FunctionPrototype((ScrnInfoPtr, int)); -extern Bool R128ScreenInit - FunctionPrototype((int, ScreenPtr, int, char **)); -extern Bool R128SwitchMode - FunctionPrototype((int, DisplayModePtr, int)); -extern void R128AdjustFrame - FunctionPrototype((int, int, int, int)); -extern Bool R128EnterVT - FunctionPrototype((int, int)); -extern void R128LeaveVT - FunctionPrototype((int, int)); -extern void R128FreeScreen - FunctionPrototype((int, int)); -extern int R128ValidMode - FunctionPrototype((int, DisplayModePtr, Bool, - int)); - -extern const OptionInfoRec R128Options[]; - -#endif /* _R128_PROBE_H_ */ diff --git a/src/r128_reg.h b/src/r128_reg.h deleted file mode 100644 index 98b89bfa..00000000 --- a/src/r128_reg.h +++ /dev/null @@ -1,1474 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_reg.h,v 1.16 2003/04/06 20:36:36 martin Exp $ */ -/* - * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, - * Precision Insight, Inc., Cedar Park, Texas, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX - * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Rickard E. Faith <faith@valinux.com> - * Kevin E. Martin <martin@valinux.com> - * Gareth Hughes <gareth@valinux.com> - * - * References: - * - * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical - * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April - * 1999. - * - * RAGE 128 Software Development Manual (Technical Reference Manual P/N - * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. - * - */ - -#ifndef _R128_REG_H_ -#define _R128_REG_H_ - -#ifdef XFree86Module -#include "xf86_ansic.h" -#endif -#include "compiler.h" - - /* Memory mapped register access macros */ -#define INREG8(addr) MMIO_IN8(R128MMIO, addr) -#define INREG16(addr) MMIO_IN16(R128MMIO, addr) -#define INREG(addr) MMIO_IN32(R128MMIO, addr) -#define OUTREG8(addr, val) MMIO_OUT8(R128MMIO, addr, val) -#define OUTREG16(addr, val) MMIO_OUT16(R128MMIO, addr, val) -#define OUTREG(addr, val) MMIO_OUT32(R128MMIO, addr, val) - -#define ADDRREG(addr) ((volatile CARD32 *)(pointer)(R128MMIO + (addr))) - - -#define OUTREGP(addr, val, mask) \ - do { \ - CARD32 tmp = INREG(addr); \ - tmp &= (mask); \ - tmp |= (val); \ - OUTREG(addr, tmp); \ - } while (0) - -#define INPLL(pScrn, addr) R128INPLL(pScrn, addr) - -#define OUTPLL(addr, val) \ - do { \ - OUTREG8(R128_CLOCK_CNTL_INDEX, ((addr) & 0x1f) | R128_PLL_WR_EN); \ - OUTREG(R128_CLOCK_CNTL_DATA, val); \ - } while (0) - -#define OUTPLLP(pScrn, addr, val, mask) \ - do { \ - CARD32 tmp = INPLL(pScrn, addr); \ - tmp &= (mask); \ - tmp |= (val); \ - OUTPLL(addr, tmp); \ - } while (0) - -#define OUTPAL_START(idx) \ - do { \ - OUTREG8(R128_PALETTE_INDEX, (idx)); \ - } while (0) - -#define OUTPAL_NEXT(r, g, b) \ - do { \ - OUTREG(R128_PALETTE_DATA, ((r) << 16) | ((g) << 8) | (b)); \ - } while (0) - -#define OUTPAL_NEXT_CARD32(v) \ - do { \ - OUTREG(R128_PALETTE_DATA, (v & 0x00ffffff)); \ - } while (0) - -#define OUTPAL(idx, r, g, b) \ - do { \ - OUTPAL_START((idx)); \ - OUTPAL_NEXT((r), (g), (b)); \ - } while (0) - -#define INPAL_START(idx) \ - do { \ - OUTREG(R128_PALETTE_INDEX, (idx) << 16); \ - } while (0) - -#define INPAL_NEXT() INREG(R128_PALETTE_DATA) - -#define PAL_SELECT(idx) \ - do { \ - CARD32 tmp = INREG(R128_DAC_CNTL); \ - if (idx) { \ - OUTREG(R128_DAC_CNTL, tmp | R128_DAC_PALETTE_ACC_CTL); \ - } else { \ - OUTREG(R128_DAC_CNTL, tmp & \ - (CARD32)~R128_DAC_PALETTE_ACC_CTL); \ - } \ - } while (0) - -#define R128_ADAPTER_ID 0x0f2c /* PCI */ -#define R128_AGP_APER_OFFSET 0x0178 -#define R128_AGP_BASE 0x0170 -#define R128_AGP_CNTL 0x0174 -# define R128_AGP_APER_SIZE_256MB (0x00 << 0) -# define R128_AGP_APER_SIZE_128MB (0x20 << 0) -# define R128_AGP_APER_SIZE_64MB (0x30 << 0) -# define R128_AGP_APER_SIZE_32MB (0x38 << 0) -# define R128_AGP_APER_SIZE_16MB (0x3c << 0) -# define R128_AGP_APER_SIZE_8MB (0x3e << 0) -# define R128_AGP_APER_SIZE_4MB (0x3f << 0) -# define R128_AGP_APER_SIZE_MASK (0x3f << 0) -#define R128_AGP_CNTL_B 0x0b44 -#define R128_AGP_COMMAND 0x0f58 /* PCI */ -#define R128_AGP_PLL_CNTL 0x0010 /* PLL */ -#define R128_AGP_STATUS 0x0f54 /* PCI */ -# define R128_AGP_1X_MODE 0x01 -# define R128_AGP_2X_MODE 0x02 -# define R128_AGP_4X_MODE 0x04 -# define R128_AGP_MODE_MASK 0x07 -#define R128_AMCGPIO_A_REG 0x01a0 -#define R128_AMCGPIO_EN_REG 0x01a8 -#define R128_AMCGPIO_MASK 0x0194 -#define R128_AMCGPIO_Y_REG 0x01a4 -#define R128_ATTRDR 0x03c1 /* VGA */ -#define R128_ATTRDW 0x03c0 /* VGA */ -#define R128_ATTRX 0x03c0 /* VGA */ -#define R128_AUX_SC_CNTL 0x1660 -# define R128_AUX1_SC_EN (1 << 0) -# define R128_AUX1_SC_MODE_OR (0 << 1) -# define R128_AUX1_SC_MODE_NAND (1 << 1) -# define R128_AUX2_SC_EN (1 << 2) -# define R128_AUX2_SC_MODE_OR (0 << 3) -# define R128_AUX2_SC_MODE_NAND (1 << 3) -# define R128_AUX3_SC_EN (1 << 4) -# define R128_AUX3_SC_MODE_OR (0 << 5) -# define R128_AUX3_SC_MODE_NAND (1 << 5) -#define R128_AUX1_SC_BOTTOM 0x1670 -#define R128_AUX1_SC_LEFT 0x1664 -#define R128_AUX1_SC_RIGHT 0x1668 -#define R128_AUX1_SC_TOP 0x166c -#define R128_AUX2_SC_BOTTOM 0x1680 -#define R128_AUX2_SC_LEFT 0x1674 -#define R128_AUX2_SC_RIGHT 0x1678 -#define R128_AUX2_SC_TOP 0x167c -#define R128_AUX3_SC_BOTTOM 0x1690 -#define R128_AUX3_SC_LEFT 0x1684 -#define R128_AUX3_SC_RIGHT 0x1688 -#define R128_AUX3_SC_TOP 0x168c -#define R128_AUX_WINDOW_HORZ_CNTL 0x02d8 -#define R128_AUX_WINDOW_VERT_CNTL 0x02dc - -#define R128_BASE_CODE 0x0f0b -#define R128_BIOS_0_SCRATCH 0x0010 -#define R128_BIOS_1_SCRATCH 0x0014 -#define R128_BIOS_2_SCRATCH 0x0018 -#define R128_BIOS_3_SCRATCH 0x001c -#define R128_BIOS_4_SCRATCH 0x0020 -#define R128_BIOS_5_SCRATCH 0x0024 -# define R128_BIOS_DISPLAY_FP (1 << 0) -# define R128_BIOS_DISPLAY_CRT (2 << 0) -# define R128_BIOS_DISPLAY_FP_CRT (3 << 0) -#define R128_BIOS_6_SCRATCH 0x0028 -#define R128_BIOS_7_SCRATCH 0x002c -#define R128_BIOS_ROM 0x0f30 /* PCI */ -#define R128_BIST 0x0f0f /* PCI */ -#define R128_BM_CHUNK_0_VAL 0x0a18 -# define R128_BM_PTR_FORCE_TO_PCI (1 << 21) -# define R128_BM_PM4_RD_FORCE_TO_PCI (1 << 22) -# define R128_BM_GLOBAL_FORCE_TO_PCI (1 << 23) -#define R128_BRUSH_DATA0 0x1480 -#define R128_BRUSH_DATA1 0x1484 -#define R128_BRUSH_DATA10 0x14a8 -#define R128_BRUSH_DATA11 0x14ac -#define R128_BRUSH_DATA12 0x14b0 -#define R128_BRUSH_DATA13 0x14b4 -#define R128_BRUSH_DATA14 0x14b8 -#define R128_BRUSH_DATA15 0x14bc -#define R128_BRUSH_DATA16 0x14c0 -#define R128_BRUSH_DATA17 0x14c4 -#define R128_BRUSH_DATA18 0x14c8 -#define R128_BRUSH_DATA19 0x14cc -#define R128_BRUSH_DATA2 0x1488 -#define R128_BRUSH_DATA20 0x14d0 -#define R128_BRUSH_DATA21 0x14d4 -#define R128_BRUSH_DATA22 0x14d8 -#define R128_BRUSH_DATA23 0x14dc -#define R128_BRUSH_DATA24 0x14e0 -#define R128_BRUSH_DATA25 0x14e4 -#define R128_BRUSH_DATA26 0x14e8 -#define R128_BRUSH_DATA27 0x14ec -#define R128_BRUSH_DATA28 0x14f0 -#define R128_BRUSH_DATA29 0x14f4 -#define R128_BRUSH_DATA3 0x148c -#define R128_BRUSH_DATA30 0x14f8 -#define R128_BRUSH_DATA31 0x14fc -#define R128_BRUSH_DATA32 0x1500 -#define R128_BRUSH_DATA33 0x1504 -#define R128_BRUSH_DATA34 0x1508 -#define R128_BRUSH_DATA35 0x150c -#define R128_BRUSH_DATA36 0x1510 -#define R128_BRUSH_DATA37 0x1514 -#define R128_BRUSH_DATA38 0x1518 -#define R128_BRUSH_DATA39 0x151c -#define R128_BRUSH_DATA4 0x1490 -#define R128_BRUSH_DATA40 0x1520 -#define R128_BRUSH_DATA41 0x1524 -#define R128_BRUSH_DATA42 0x1528 -#define R128_BRUSH_DATA43 0x152c -#define R128_BRUSH_DATA44 0x1530 -#define R128_BRUSH_DATA45 0x1534 -#define R128_BRUSH_DATA46 0x1538 -#define R128_BRUSH_DATA47 0x153c -#define R128_BRUSH_DATA48 0x1540 -#define R128_BRUSH_DATA49 0x1544 -#define R128_BRUSH_DATA5 0x1494 -#define R128_BRUSH_DATA50 0x1548 -#define R128_BRUSH_DATA51 0x154c -#define R128_BRUSH_DATA52 0x1550 -#define R128_BRUSH_DATA53 0x1554 -#define R128_BRUSH_DATA54 0x1558 -#define R128_BRUSH_DATA55 0x155c -#define R128_BRUSH_DATA56 0x1560 -#define R128_BRUSH_DATA57 0x1564 -#define R128_BRUSH_DATA58 0x1568 -#define R128_BRUSH_DATA59 0x156c -#define R128_BRUSH_DATA6 0x1498 -#define R128_BRUSH_DATA60 0x1570 -#define R128_BRUSH_DATA61 0x1574 -#define R128_BRUSH_DATA62 0x1578 -#define R128_BRUSH_DATA63 0x157c -#define R128_BRUSH_DATA7 0x149c -#define R128_BRUSH_DATA8 0x14a0 -#define R128_BRUSH_DATA9 0x14a4 -#define R128_BRUSH_SCALE 0x1470 -#define R128_BRUSH_Y_X 0x1474 -#define R128_BUS_CNTL 0x0030 -# define R128_BUS_MASTER_DIS (1 << 6) -# define R128_BUS_RD_DISCARD_EN (1 << 24) -# define R128_BUS_RD_ABORT_EN (1 << 25) -# define R128_BUS_MSTR_DISCONNECT_EN (1 << 28) -# define R128_BUS_WRT_BURST (1 << 29) -# define R128_BUS_READ_BURST (1 << 30) -#define R128_BUS_CNTL1 0x0034 -# define R128_BUS_WAIT_ON_LOCK_EN (1 << 4) - -#define R128_CACHE_CNTL 0x1724 -#define R128_CACHE_LINE 0x0f0c /* PCI */ -#define R128_CAP0_TRIG_CNTL 0x0950 /* ? */ -#define R128_CAP1_TRIG_CNTL 0x09c0 /* ? */ -#define R128_CAPABILITIES_ID 0x0f50 /* PCI */ -#define R128_CAPABILITIES_PTR 0x0f34 /* PCI */ -#define R128_CLK_PIN_CNTL 0x0001 /* PLL */ -#define R128_CLOCK_CNTL_DATA 0x000c -#define R128_CLOCK_CNTL_INDEX 0x0008 -# define R128_PLL_WR_EN (1 << 7) -# define R128_PLL_DIV_SEL (3 << 8) -#define R128_CLR_CMP_CLR_3D 0x1a24 -#define R128_CLR_CMP_CLR_DST 0x15c8 -#define R128_CLR_CMP_CLR_SRC 0x15c4 -#define R128_CLR_CMP_CNTL 0x15c0 -# define R128_SRC_CMP_EQ_COLOR (4 << 0) -# define R128_SRC_CMP_NEQ_COLOR (5 << 0) -# define R128_CLR_CMP_SRC_SOURCE (1 << 24) -#define R128_CLR_CMP_MASK 0x15cc -# define R128_CLR_CMP_MSK 0xffffffff -#define R128_CLR_CMP_MASK_3D 0x1A28 -#define R128_COMMAND 0x0f04 /* PCI */ -#define R128_COMPOSITE_SHADOW_ID 0x1a0c -#define R128_CONFIG_APER_0_BASE 0x0100 -#define R128_CONFIG_APER_1_BASE 0x0104 -#define R128_CONFIG_APER_SIZE 0x0108 -#define R128_CONFIG_BONDS 0x00e8 -#define R128_CONFIG_CNTL 0x00e0 -# define APER_0_BIG_ENDIAN_16BPP_SWAP (1 << 0) -# define APER_0_BIG_ENDIAN_32BPP_SWAP (2 << 0) -#define R128_CONFIG_MEMSIZE 0x00f8 -#define R128_CONFIG_MEMSIZE_EMBEDDED 0x0114 -#define R128_CONFIG_REG_1_BASE 0x010c -#define R128_CONFIG_REG_APER_SIZE 0x0110 -#define R128_CONFIG_XSTRAP 0x00e4 -#define R128_CONSTANT_COLOR_C 0x1d34 -# define R128_CONSTANT_COLOR_MASK 0x00ffffff -# define R128_CONSTANT_COLOR_ONE 0x00ffffff -# define R128_CONSTANT_COLOR_ZERO 0x00000000 -#define R128_CRC_CMDFIFO_ADDR 0x0740 -#define R128_CRC_CMDFIFO_DOUT 0x0744 -#define R128_CRTC_CRNT_FRAME 0x0214 -#define R128_CRTC_DEBUG 0x021c -#define R128_CRTC_EXT_CNTL 0x0054 -# define R128_CRTC_VGA_XOVERSCAN (1 << 0) -# define R128_VGA_ATI_LINEAR (1 << 3) -# define R128_XCRT_CNT_EN (1 << 6) -# define R128_CRTC_HSYNC_DIS (1 << 8) -# define R128_CRTC_VSYNC_DIS (1 << 9) -# define R128_CRTC_DISPLAY_DIS (1 << 10) -# define R128_CRTC_CRT_ON (1 << 15) -# define R128_FP_OUT_EN (1 << 22) -# define R128_FP_ACTIVE (1 << 23) -#define R128_CRTC_EXT_CNTL_DPMS_BYTE 0x0055 -# define R128_CRTC_HSYNC_DIS_BYTE (1 << 0) -# define R128_CRTC_VSYNC_DIS_BYTE (1 << 1) -# define R128_CRTC_DISPLAY_DIS_BYTE (1 << 2) -#define R128_CRTC_GEN_CNTL 0x0050 -# define R128_CRTC_DBL_SCAN_EN (1 << 0) -# define R128_CRTC_INTERLACE_EN (1 << 1) -# define R128_CRTC_CSYNC_EN (1 << 4) -# define R128_CRTC_CUR_EN (1 << 16) -# define R128_CRTC_CUR_MODE_MASK (7 << 17) -# define R128_CRTC_ICON_EN (1 << 20) -# define R128_CRTC_EXT_DISP_EN (1 << 24) -# define R128_CRTC_EN (1 << 25) -# define R128_CRTC_DISP_REQ_EN_B (1 << 26) -#define R128_CRTC_GUI_TRIG_VLINE 0x0218 -#define R128_CRTC_H_SYNC_STRT_WID 0x0204 -# define R128_CRTC_H_SYNC_STRT_PIX (0x07 << 0) -# define R128_CRTC_H_SYNC_STRT_CHAR (0x1ff << 3) -# define R128_CRTC_H_SYNC_STRT_CHAR_SHIFT 3 -# define R128_CRTC_H_SYNC_WID (0x3f << 16) -# define R128_CRTC_H_SYNC_WID_SHIFT 16 -# define R128_CRTC_H_SYNC_POL (1 << 23) -#define R128_CRTC_H_TOTAL_DISP 0x0200 -# define R128_CRTC_H_TOTAL (0x01ff << 0) -# define R128_CRTC_H_TOTAL_SHIFT 0 -# define R128_CRTC_H_DISP (0x00ff << 16) -# define R128_CRTC_H_DISP_SHIFT 16 -#define R128_CRTC_OFFSET 0x0224 -#define R128_CRTC_OFFSET_CNTL 0x0228 -#define R128_CRTC_PITCH 0x022c -#define R128_CRTC_STATUS 0x005c -# define R128_CRTC_VBLANK_SAVE (1 << 1) -#define R128_CRTC_V_SYNC_STRT_WID 0x020c -# define R128_CRTC_V_SYNC_STRT (0x7ff << 0) -# define R128_CRTC_V_SYNC_STRT_SHIFT 0 -# define R128_CRTC_V_SYNC_WID (0x1f << 16) -# define R128_CRTC_V_SYNC_WID_SHIFT 16 -# define R128_CRTC_V_SYNC_POL (1 << 23) -#define R128_CRTC_V_TOTAL_DISP 0x0208 -# define R128_CRTC_V_TOTAL (0x07ff << 0) -# define R128_CRTC_V_TOTAL_SHIFT 0 -# define R128_CRTC_V_DISP (0x07ff << 16) -# define R128_CRTC_V_DISP_SHIFT 16 -#define R128_CRTC_VLINE_CRNT_VLINE 0x0210 -# define R128_CRTC_CRNT_VLINE_MASK (0x7ff << 16) -#define R128_CRTC2_CRNT_FRAME 0x0314 -#define R128_CRTC2_DEBUG 0x031c -#define R128_CRTC2_GEN_CNTL 0x03f8 -#define R128_CRTC2_GUI_TRIG_VLINE 0x0318 -#define R128_CRTC2_H_SYNC_STRT_WID 0x0304 -#define R128_CRTC2_H_TOTAL_DISP 0x0300 -#define R128_CRTC2_OFFSET 0x0324 -#define R128_CRTC2_OFFSET_CNTL 0x0328 -#define R128_CRTC2_PITCH 0x032c -#define R128_CRTC2_STATUS 0x03fc -#define R128_CRTC2_V_SYNC_STRT_WID 0x030c -#define R128_CRTC2_V_TOTAL_DISP 0x0308 -#define R128_CRTC2_VLINE_CRNT_VLINE 0x0310 -#define R128_CRTC8_DATA 0x03d5 /* VGA, 0x3b5 */ -#define R128_CRTC8_IDX 0x03d4 /* VGA, 0x3b4 */ -#define R128_CUR_CLR0 0x026c -#define R128_CUR_CLR1 0x0270 -#define R128_CUR_HORZ_VERT_OFF 0x0268 -#define R128_CUR_HORZ_VERT_POSN 0x0264 -#define R128_CUR_OFFSET 0x0260 -# define R128_CUR_LOCK (1 << 31) - -#define R128_DAC_CNTL 0x0058 -# define R128_DAC_RANGE_CNTL (3 << 0) -# define R128_DAC_BLANKING (1 << 2) -# define R128_DAC_CRT_SEL_CRTC2 (1 << 4) -# define R128_DAC_PALETTE_ACC_CTL (1 << 5) -# define R128_DAC_8BIT_EN (1 << 8) -# define R128_DAC_VGA_ADR_EN (1 << 13) -# define R128_DAC_MASK_ALL (0xff << 24) -#define R128_DAC_CRC_SIG 0x02cc -#define R128_DAC_DATA 0x03c9 /* VGA */ -#define R128_DAC_MASK 0x03c6 /* VGA */ -#define R128_DAC_R_INDEX 0x03c7 /* VGA */ -#define R128_DAC_W_INDEX 0x03c8 /* VGA */ -#define R128_DDA_CONFIG 0x02e0 -#define R128_DDA_ON_OFF 0x02e4 -#define R128_DEFAULT_OFFSET 0x16e0 -#define R128_DEFAULT_PITCH 0x16e4 -#define R128_DEFAULT_SC_BOTTOM_RIGHT 0x16e8 -# define R128_DEFAULT_SC_RIGHT_MAX (0x1fff << 0) -# define R128_DEFAULT_SC_BOTTOM_MAX (0x1fff << 16) -#define R128_DESTINATION_3D_CLR_CMP_VAL 0x1820 -#define R128_DESTINATION_3D_CLR_CMP_MSK 0x1824 -#define R128_DEVICE_ID 0x0f02 /* PCI */ -#define R128_DP_BRUSH_BKGD_CLR 0x1478 -#define R128_DP_BRUSH_FRGD_CLR 0x147c -#define R128_DP_CNTL 0x16c0 -# define R128_DST_X_LEFT_TO_RIGHT (1 << 0) -# define R128_DST_Y_TOP_TO_BOTTOM (1 << 1) -#define R128_DP_CNTL_XDIR_YDIR_YMAJOR 0x16d0 -# define R128_DST_Y_MAJOR (1 << 2) -# define R128_DST_Y_DIR_TOP_TO_BOTTOM (1 << 15) -# define R128_DST_X_DIR_LEFT_TO_RIGHT (1 << 31) -#define R128_DP_DATATYPE 0x16c4 -# define R128_HOST_BIG_ENDIAN_EN (1 << 29) -#define R128_DP_GUI_MASTER_CNTL 0x146c -# define R128_GMC_SRC_PITCH_OFFSET_CNTL (1 << 0) -# define R128_GMC_DST_PITCH_OFFSET_CNTL (1 << 1) -# define R128_GMC_SRC_CLIPPING (1 << 2) -# define R128_GMC_DST_CLIPPING (1 << 3) -# define R128_GMC_BRUSH_DATATYPE_MASK (0x0f << 4) -# define R128_GMC_BRUSH_8X8_MONO_FG_BG (0 << 4) -# define R128_GMC_BRUSH_8X8_MONO_FG_LA (1 << 4) -# define R128_GMC_BRUSH_1X8_MONO_FG_BG (4 << 4) -# define R128_GMC_BRUSH_1X8_MONO_FG_LA (5 << 4) -# define R128_GMC_BRUSH_32x1_MONO_FG_BG (6 << 4) -# define R128_GMC_BRUSH_32x1_MONO_FG_LA (7 << 4) -# define R128_GMC_BRUSH_32x32_MONO_FG_BG (8 << 4) -# define R128_GMC_BRUSH_32x32_MONO_FG_LA (9 << 4) -# define R128_GMC_BRUSH_8x8_COLOR (10 << 4) -# define R128_GMC_BRUSH_1X8_COLOR (12 << 4) -# define R128_GMC_BRUSH_SOLID_COLOR (13 << 4) -# define R128_GMC_BRUSH_NONE (15 << 4) -# define R128_GMC_DST_8BPP_CI (2 << 8) -# define R128_GMC_DST_15BPP (3 << 8) -# define R128_GMC_DST_16BPP (4 << 8) -# define R128_GMC_DST_24BPP (5 << 8) -# define R128_GMC_DST_32BPP (6 << 8) -# define R128_GMC_DST_8BPP_RGB (7 << 8) -# define R128_GMC_DST_Y8 (8 << 8) -# define R128_GMC_DST_RGB8 (9 << 8) -# define R128_GMC_DST_VYUY (11 << 8) -# define R128_GMC_DST_YVYU (12 << 8) -# define R128_GMC_DST_AYUV444 (14 << 8) -# define R128_GMC_DST_ARGB4444 (15 << 8) -# define R128_GMC_DST_DATATYPE_MASK (0x0f << 8) -# define R128_GMC_DST_DATATYPE_SHIFT 8 -# define R128_GMC_SRC_DATATYPE_MASK (3 << 12) -# define R128_GMC_SRC_DATATYPE_MONO_FG_BG (0 << 12) -# define R128_GMC_SRC_DATATYPE_MONO_FG_LA (1 << 12) -# define R128_GMC_SRC_DATATYPE_COLOR (3 << 12) -# define R128_GMC_BYTE_PIX_ORDER (1 << 14) -# define R128_GMC_BYTE_MSB_TO_LSB (0 << 14) -# define R128_GMC_BYTE_LSB_TO_MSB (1 << 14) -# define R128_GMC_CONVERSION_TEMP (1 << 15) -# define R128_GMC_CONVERSION_TEMP_6500 (0 << 15) -# define R128_GMC_CONVERSION_TEMP_9300 (1 << 15) -# define R128_GMC_ROP3_MASK (0xff << 16) -# define R128_DP_SRC_SOURCE_MASK (7 << 24) -# define R128_DP_SRC_SOURCE_MEMORY (2 << 24) -# define R128_DP_SRC_SOURCE_HOST_DATA (3 << 24) -# define R128_GMC_3D_FCN_EN (1 << 27) -# define R128_GMC_CLR_CMP_CNTL_DIS (1 << 28) -# define R128_GMC_AUX_CLIP_DIS (1 << 29) -# define R128_GMC_WR_MSK_DIS (1 << 30) -# define R128_GMC_LD_BRUSH_Y_X (1 << 31) -# define R128_ROP3_ZERO 0x00000000 -# define R128_ROP3_DSa 0x00880000 -# define R128_ROP3_SDna 0x00440000 -# define R128_ROP3_S 0x00cc0000 -# define R128_ROP3_DSna 0x00220000 -# define R128_ROP3_D 0x00aa0000 -# define R128_ROP3_DSx 0x00660000 -# define R128_ROP3_DSo 0x00ee0000 -# define R128_ROP3_DSon 0x00110000 -# define R128_ROP3_DSxn 0x00990000 -# define R128_ROP3_Dn 0x00550000 -# define R128_ROP3_SDno 0x00dd0000 -# define R128_ROP3_Sn 0x00330000 -# define R128_ROP3_DSno 0x00bb0000 -# define R128_ROP3_DSan 0x00770000 -# define R128_ROP3_ONE 0x00ff0000 -# define R128_ROP3_DPa 0x00a00000 -# define R128_ROP3_PDna 0x00500000 -# define R128_ROP3_P 0x00f00000 -# define R128_ROP3_DPna 0x000a0000 -# define R128_ROP3_D 0x00aa0000 -# define R128_ROP3_DPx 0x005a0000 -# define R128_ROP3_DPo 0x00fa0000 -# define R128_ROP3_DPon 0x00050000 -# define R128_ROP3_PDxn 0x00a50000 -# define R128_ROP3_PDno 0x00f50000 -# define R128_ROP3_Pn 0x000f0000 -# define R128_ROP3_DPno 0x00af0000 -# define R128_ROP3_DPan 0x005f0000 - - -#define R128_DP_GUI_MASTER_CNTL_C 0x1c84 -#define R128_DP_MIX 0x16c8 -#define R128_DP_SRC_BKGD_CLR 0x15dc -#define R128_DP_SRC_FRGD_CLR 0x15d8 -#define R128_DP_WRITE_MASK 0x16cc -#define R128_DST_BRES_DEC 0x1630 -#define R128_DST_BRES_ERR 0x1628 -#define R128_DST_BRES_INC 0x162c -#define R128_DST_BRES_LNTH 0x1634 -#define R128_DST_BRES_LNTH_SUB 0x1638 -#define R128_DST_HEIGHT 0x1410 -#define R128_DST_HEIGHT_WIDTH 0x143c -#define R128_DST_HEIGHT_WIDTH_8 0x158c -#define R128_DST_HEIGHT_WIDTH_BW 0x15b4 -#define R128_DST_HEIGHT_Y 0x15a0 -#define R128_DST_OFFSET 0x1404 -#define R128_DST_PITCH 0x1408 -#define R128_DST_PITCH_OFFSET 0x142c -#define R128_DST_PITCH_OFFSET_C 0x1c80 -# define R128_PITCH_SHIFT 21 -# define R128_DST_TILE (1 << 31) -#define R128_DST_WIDTH 0x140c -#define R128_DST_WIDTH_HEIGHT 0x1598 -#define R128_DST_WIDTH_X 0x1588 -#define R128_DST_WIDTH_X_INCY 0x159c -#define R128_DST_X 0x141c -#define R128_DST_X_SUB 0x15a4 -#define R128_DST_X_Y 0x1594 -#define R128_DST_Y 0x1420 -#define R128_DST_Y_SUB 0x15a8 -#define R128_DST_Y_X 0x1438 - -#define R128_EXT_MEM_CNTL 0x0144 - -#define R128_FCP_CNTL 0x0012 /* PLL */ -#define R128_FLUSH_1 0x1704 -#define R128_FLUSH_2 0x1708 -#define R128_FLUSH_3 0x170c -#define R128_FLUSH_4 0x1710 -#define R128_FLUSH_5 0x1714 -#define R128_FLUSH_6 0x1718 -#define R128_FLUSH_7 0x171c -#define R128_FOG_3D_TABLE_START 0x1810 -#define R128_FOG_3D_TABLE_END 0x1814 -#define R128_FOG_3D_TABLE_DENSITY 0x181c -#define R128_FOG_TABLE_INDEX 0x1a14 -#define R128_FOG_TABLE_DATA 0x1a18 -#define R128_FP_CRTC_H_TOTAL_DISP 0x0250 -#define R128_FP_CRTC_V_TOTAL_DISP 0x0254 -#define R128_FP_GEN_CNTL 0x0284 -# define R128_FP_FPON (1 << 0) -# define R128_FP_BLANK_DIS (1 << 1) -# define R128_FP_TDMS_EN (1 << 2) -# define R128_FP_DETECT_SENSE (1 << 8) -# define R128_FP_SEL_CRTC2 (1 << 13) -# define R128_FP_CRTC_DONT_SHADOW_VPAR (1 << 16) -# define R128_FP_CRTC_DONT_SHADOW_HEND (1 << 17) -# define R128_FP_CRTC_USE_SHADOW_VEND (1 << 18) -# define R128_FP_CRTC_USE_SHADOW_ROWCUR (1 << 19) -# define R128_FP_CRTC_HORZ_DIV2_EN (1 << 20) -# define R128_FP_CRTC_HOR_CRT_DIV2_DIS (1 << 21) -# define R128_FP_CRT_SYNC_SEL (1 << 23) -# define R128_FP_USE_SHADOW_EN (1 << 24) -#define R128_FP_H_SYNC_STRT_WID 0x02c4 -#define R128_FP_HORZ_STRETCH 0x028c -# define R128_HORZ_STRETCH_RATIO_MASK 0xffff -# define R128_HORZ_STRETCH_RATIO_SHIFT 0 -# define R128_HORZ_STRETCH_RATIO_MAX 4096 -# define R128_HORZ_PANEL_SIZE (0xff << 16) -# define R128_HORZ_PANEL_SHIFT 16 -# define R128_AUTO_HORZ_RATIO (0 << 24) -# define R128_HORZ_STRETCH_PIXREP (0 << 25) -# define R128_HORZ_STRETCH_BLEND (1 << 25) -# define R128_HORZ_STRETCH_ENABLE (1 << 26) -# define R128_HORZ_FP_LOOP_STRETCH (0x7 << 27) -# define R128_HORZ_STRETCH_RESERVED (1 << 30) -# define R128_HORZ_AUTO_RATIO_FIX_EN (1 << 31) - -#define R128_FP_PANEL_CNTL 0x0288 -# define R128_FP_DIGON (1 << 0) -# define R128_FP_BLON (1 << 1) -#define R128_FP_V_SYNC_STRT_WID 0x02c8 -#define R128_FP_VERT_STRETCH 0x0290 -# define R128_VERT_PANEL_SIZE (0x7ff << 0) -# define R128_VERT_PANEL_SHIFT 0 -# define R128_VERT_STRETCH_RATIO_MASK 0x3ff -# define R128_VERT_STRETCH_RATIO_SHIFT 11 -# define R128_VERT_STRETCH_RATIO_MAX 1024 -# define R128_VERT_STRETCH_ENABLE (1 << 24) -# define R128_VERT_STRETCH_LINEREP (0 << 25) -# define R128_VERT_STRETCH_BLEND (1 << 25) -# define R128_VERT_AUTO_RATIO_EN (1 << 26) -# define R128_VERT_STRETCH_RESERVED 0xf8e00000 - -#define R128_GEN_INT_CNTL 0x0040 -#define R128_GEN_INT_STATUS 0x0044 -# define R128_VSYNC_INT_AK (1 << 2) -# define R128_VSYNC_INT (1 << 2) -#define R128_GEN_RESET_CNTL 0x00f0 -# define R128_SOFT_RESET_GUI (1 << 0) -# define R128_SOFT_RESET_VCLK (1 << 8) -# define R128_SOFT_RESET_PCLK (1 << 9) -# define R128_SOFT_RESET_DISPENG_XCLK (1 << 11) -# define R128_SOFT_RESET_MEMCTLR_XCLK (1 << 12) -#define R128_GENENB 0x03c3 /* VGA */ -#define R128_GENFC_RD 0x03ca /* VGA */ -#define R128_GENFC_WT 0x03da /* VGA, 0x03ba */ -#define R128_GENMO_RD 0x03cc /* VGA */ -#define R128_GENMO_WT 0x03c2 /* VGA */ -#define R128_GENS0 0x03c2 /* VGA */ -#define R128_GENS1 0x03da /* VGA, 0x03ba */ -#define R128_GPIO_MONID 0x0068 -# define R128_GPIO_MONID_A_0 (1 << 0) -# define R128_GPIO_MONID_A_1 (1 << 1) -# define R128_GPIO_MONID_A_2 (1 << 2) -# define R128_GPIO_MONID_A_3 (1 << 3) -# define R128_GPIO_MONID_Y_0 (1 << 8) -# define R128_GPIO_MONID_Y_1 (1 << 9) -# define R128_GPIO_MONID_Y_2 (1 << 10) -# define R128_GPIO_MONID_Y_3 (1 << 11) -# define R128_GPIO_MONID_EN_0 (1 << 16) -# define R128_GPIO_MONID_EN_1 (1 << 17) -# define R128_GPIO_MONID_EN_2 (1 << 18) -# define R128_GPIO_MONID_EN_3 (1 << 19) -# define R128_GPIO_MONID_MASK_0 (1 << 24) -# define R128_GPIO_MONID_MASK_1 (1 << 25) -# define R128_GPIO_MONID_MASK_2 (1 << 26) -# define R128_GPIO_MONID_MASK_3 (1 << 27) -#define R128_GPIO_MONIDB 0x006c -#define R128_GRPH8_DATA 0x03cf /* VGA */ -#define R128_GRPH8_IDX 0x03ce /* VGA */ -#define R128_GUI_DEBUG0 0x16a0 -#define R128_GUI_DEBUG1 0x16a4 -#define R128_GUI_DEBUG2 0x16a8 -#define R128_GUI_DEBUG3 0x16ac -#define R128_GUI_DEBUG4 0x16b0 -#define R128_GUI_DEBUG5 0x16b4 -#define R128_GUI_DEBUG6 0x16b8 -#define R128_GUI_PROBE 0x16bc -#define R128_GUI_SCRATCH_REG0 0x15e0 -#define R128_GUI_SCRATCH_REG1 0x15e4 -#define R128_GUI_SCRATCH_REG2 0x15e8 -#define R128_GUI_SCRATCH_REG3 0x15ec -#define R128_GUI_SCRATCH_REG4 0x15f0 -#define R128_GUI_SCRATCH_REG5 0x15f4 -#define R128_GUI_STAT 0x1740 -# define R128_GUI_FIFOCNT_MASK 0x0fff -# define R128_GUI_ACTIVE (1 << 31) - -#define R128_HEADER 0x0f0e /* PCI */ -#define R128_HOST_DATA0 0x17c0 -#define R128_HOST_DATA1 0x17c4 -#define R128_HOST_DATA2 0x17c8 -#define R128_HOST_DATA3 0x17cc -#define R128_HOST_DATA4 0x17d0 -#define R128_HOST_DATA5 0x17d4 -#define R128_HOST_DATA6 0x17d8 -#define R128_HOST_DATA7 0x17dc -#define R128_HOST_DATA_LAST 0x17e0 -#define R128_HOST_PATH_CNTL 0x0130 -#define R128_HTOTAL_CNTL 0x0009 /* PLL */ -#define R128_HW_DEBUG 0x0128 -#define R128_HW_DEBUG2 0x011c - -#define R128_I2C_CNTL_1 0x0094 /* ? */ -#define R128_INTERRUPT_LINE 0x0f3c /* PCI */ -#define R128_INTERRUPT_PIN 0x0f3d /* PCI */ -#define R128_IO_BASE 0x0f14 /* PCI */ - -#define R128_LATENCY 0x0f0d /* PCI */ -#define R128_LEAD_BRES_DEC 0x1608 -#define R128_LEAD_BRES_ERR 0x1600 -#define R128_LEAD_BRES_INC 0x1604 -#define R128_LEAD_BRES_LNTH 0x161c -#define R128_LEAD_BRES_LNTH_SUB 0x1624 -#define R128_LVDS_GEN_CNTL 0x02d0 -# define R128_LVDS_ON (1 << 0) -# define R128_LVDS_DISPLAY_DIS (1 << 1) -# define R128_LVDS_EN (1 << 7) -# define R128_LVDS_DIGON (1 << 18) -# define R128_LVDS_BLON (1 << 19) -# define R128_LVDS_SEL_CRTC2 (1 << 23) -# define R128_HSYNC_DELAY_SHIFT 28 -# define R128_HSYNC_DELAY_MASK (0xf << 28) - -#define R128_MAX_LATENCY 0x0f3f /* PCI */ -#define R128_MCLK_CNTL 0x000f /* PLL */ -# define R128_FORCE_GCP (1 << 16) -# define R128_FORCE_PIPE3D_CP (1 << 17) -# define R128_FORCE_RCP (1 << 18) -#define R128_MDGPIO_A_REG 0x01ac -#define R128_MDGPIO_EN_REG 0x01b0 -#define R128_MDGPIO_MASK 0x0198 -#define R128_MDGPIO_Y_REG 0x01b4 -#define R128_MEM_ADDR_CONFIG 0x0148 -#define R128_MEM_BASE 0x0f10 /* PCI */ -#define R128_MEM_CNTL 0x0140 -#define R128_MEM_INIT_LAT_TIMER 0x0154 -#define R128_MEM_INTF_CNTL 0x014c -#define R128_MEM_SDRAM_MODE_REG 0x0158 -#define R128_MEM_STR_CNTL 0x0150 -#define R128_MEM_VGA_RP_SEL 0x003c -#define R128_MEM_VGA_WP_SEL 0x0038 -#define R128_MIN_GRANT 0x0f3e /* PCI */ -#define R128_MM_DATA 0x0004 -#define R128_MM_INDEX 0x0000 -#define R128_MPLL_CNTL 0x000e /* PLL */ -#define R128_MPP_TB_CONFIG 0x01c0 /* ? */ -#define R128_MPP_GP_CONFIG 0x01c8 /* ? */ - -#define R128_N_VIF_COUNT 0x0248 - -#define R128_OVR_CLR 0x0230 -#define R128_OVR_WID_LEFT_RIGHT 0x0234 -#define R128_OVR_WID_TOP_BOTTOM 0x0238 - -/* first overlay unit (there is only one) */ - -#define R128_OV0_Y_X_START 0x0400 -#define R128_OV0_Y_X_END 0x0404 -#define R128_OV0_EXCLUSIVE_HORZ 0x0408 -# define R128_EXCL_HORZ_START_MASK 0x000000ff -# define R128_EXCL_HORZ_END_MASK 0x0000ff00 -# define R128_EXCL_HORZ_BACK_PORCH_MASK 0x00ff0000 -# define R128_EXCL_HORZ_EXCLUSIVE_EN 0x80000000 -#define R128_OV0_EXCLUSIVE_VERT 0x040C -# define R128_EXCL_VERT_START_MASK 0x000003ff -# define R128_EXCL_VERT_END_MASK 0x03ff0000 -#define R128_OV0_REG_LOAD_CNTL 0x0410 -# define R128_REG_LD_CTL_LOCK 0x00000001L -# define R128_REG_LD_CTL_VBLANK_DURING_LOCK 0x00000002L -# define R128_REG_LD_CTL_STALL_GUI_UNTIL_FLIP 0x00000004L -# define R128_REG_LD_CTL_LOCK_READBACK 0x00000008L -#define R128_OV0_SCALE_CNTL 0x0420 -# define R128_SCALER_PIX_EXPAND 0x00000001L -# define R128_SCALER_Y2R_TEMP 0x00000002L -# define R128_SCALER_HORZ_PICK_NEAREST 0x00000003L -# define R128_SCALER_VERT_PICK_NEAREST 0x00000004L -# define R128_SCALER_SIGNED_UV 0x00000010L -# define R128_SCALER_GAMMA_SEL_MASK 0x00000060L -# define R128_SCALER_GAMMA_SEL_BRIGHT 0x00000000L -# define R128_SCALER_GAMMA_SEL_G22 0x00000020L -# define R128_SCALER_GAMMA_SEL_G18 0x00000040L -# define R128_SCALER_GAMMA_SEL_G14 0x00000060L -# define R128_SCALER_COMCORE_SHIFT_UP_ONE 0x00000080L -# define R128_SCALER_SURFAC_FORMAT 0x00000f00L -# define R128_SCALER_SOURCE_15BPP 0x00000300L -# define R128_SCALER_SOURCE_16BPP 0x00000400L -# define R128_SCALER_SOURCE_32BPP 0x00000600L -# define R128_SCALER_SOURCE_YUV9 0x00000900L -# define R128_SCALER_SOURCE_YUV12 0x00000A00L -# define R128_SCALER_SOURCE_VYUY422 0x00000B00L -# define R128_SCALER_SOURCE_YVYU422 0x00000C00L -# define R128_SCALER_SMART_SWITCH 0x00008000L -# define R128_SCALER_BURST_PER_PLANE 0x00ff0000L -# define R128_SCALER_DOUBLE_BUFFER 0x01000000L -# define R128_SCALER_DIS_LIMIT 0x08000000L -# define R128_SCALER_PRG_LOAD_START 0x10000000L -# define R128_SCALER_INT_EMU 0x20000000L -# define R128_SCALER_ENABLE 0x40000000L -# define R128_SCALER_SOFT_RESET 0x80000000L -#define R128_OV0_V_INC 0x0424 -#define R128_OV0_P1_V_ACCUM_INIT 0x0428 -# define R128_OV0_P1_MAX_LN_IN_PER_LN_OUT 0x00000003L -# define R128_OV0_P1_V_ACCUM_INIT_MASK 0x01ff8000L -#define R128_OV0_P23_V_ACCUM_INIT 0x042C -#define R128_OV0_P1_BLANK_LINES_AT_TOP 0x0430 -# define R128_P1_BLNK_LN_AT_TOP_M1_MASK 0x00000fffL -# define R128_P1_ACTIVE_LINES_M1 0x0fff0000L -#define R128_OV0_P23_BLANK_LINES_AT_TOP 0x0434 -# define R128_P23_BLNK_LN_AT_TOP_M1_MASK 0x000007ffL -# define R128_P23_ACTIVE_LINES_M1 0x07ff0000L -#define R128_OV0_VID_BUF0_BASE_ADRS 0x0440 -# define R128_VIF_BUF0_PITCH_SEL 0x00000001L -# define R128_VIF_BUF0_TILE_ADRS 0x00000002L -# define R128_VIF_BUF0_BASE_ADRS_MASK 0x03fffff0L -# define R128_VIF_BUF0_1ST_LINE_LSBS_MASK 0x48000000L -#define R128_OV0_VID_BUF1_BASE_ADRS 0x0444 -# define R128_VIF_BUF1_PITCH_SEL 0x00000001L -# define R128_VIF_BUF1_TILE_ADRS 0x00000002L -# define R128_VIF_BUF1_BASE_ADRS_MASK 0x03fffff0L -# define R128_VIF_BUF1_1ST_LINE_LSBS_MASK 0x48000000L -#define R128_OV0_VID_BUF2_BASE_ADRS 0x0448 -# define R128_VIF_BUF2_PITCH_SEL 0x00000001L -# define R128_VIF_BUF2_TILE_ADRS 0x00000002L -# define R128_VIF_BUF2_BASE_ADRS_MASK 0x03fffff0L -# define R128_VIF_BUF2_1ST_LINE_LSBS_MASK 0x48000000L -#define R128_OV0_VID_BUF3_BASE_ADRS 0x044C -#define R128_OV0_VID_BUF4_BASE_ADRS 0x0450 -#define R128_OV0_VID_BUF5_BASE_ADRS 0x0454 -#define R128_OV0_VID_BUF_PITCH0_VALUE 0x0460 -#define R128_OV0_VID_BUF_PITCH1_VALUE 0x0464 -#define R128_OV0_AUTO_FLIP_CNTL 0x0470 -#define R128_OV0_DEINTERLACE_PATTERN 0x0474 -#define R128_OV0_H_INC 0x0480 -#define R128_OV0_STEP_BY 0x0484 -#define R128_OV0_P1_H_ACCUM_INIT 0x0488 -#define R128_OV0_P23_H_ACCUM_INIT 0x048C -#define R128_OV0_P1_X_START_END 0x0494 -#define R128_OV0_P2_X_START_END 0x0498 -#define R128_OV0_P3_X_START_END 0x049C -#define R128_OV0_FILTER_CNTL 0x04A0 -#define R128_OV0_FOUR_TAP_COEF_0 0x04B0 -#define R128_OV0_FOUR_TAP_COEF_1 0x04B4 -#define R128_OV0_FOUR_TAP_COEF_2 0x04B8 -#define R128_OV0_FOUR_TAP_COEF_3 0x04BC -#define R128_OV0_FOUR_TAP_COEF_4 0x04C0 -#define R128_OV0_COLOUR_CNTL 0x04E0 -#define R128_OV0_VIDEO_KEY_CLR 0x04E4 -#define R128_OV0_VIDEO_KEY_MSK 0x04E8 -#define R128_OV0_GRAPHICS_KEY_CLR 0x04EC -#define R128_OV0_GRAPHICS_KEY_MSK 0x04F0 -#define R128_OV0_KEY_CNTL 0x04F4 -# define R128_VIDEO_KEY_FN_MASK 0x00000007L -# define R128_VIDEO_KEY_FN_FALSE 0x00000000L -# define R128_VIDEO_KEY_FN_TRUE 0x00000001L -# define R128_VIDEO_KEY_FN_EQ 0x00000004L -# define R128_VIDEO_KEY_FN_NE 0x00000005L -# define R128_GRAPHIC_KEY_FN_MASK 0x00000070L -# define R128_GRAPHIC_KEY_FN_FALSE 0x00000000L -# define R128_GRAPHIC_KEY_FN_TRUE 0x00000010L -# define R128_GRAPHIC_KEY_FN_EQ 0x00000040L -# define R128_GRAPHIC_KEY_FN_NE 0x00000050L -# define R128_CMP_MIX_MASK 0x00000100L -# define R128_CMP_MIX_OR 0x00000000L -# define R128_CMP_MIX_AND 0x00000100L -#define R128_OV0_TEST 0x04F8 - - -#define R128_PALETTE_DATA 0x00b4 -#define R128_PALETTE_INDEX 0x00b0 -#define R128_PC_DEBUG_MODE 0x1760 -#define R128_PC_GUI_CTLSTAT 0x1748 -#define R128_PC_GUI_MODE 0x1744 -# define R128_PC_IGNORE_UNIFY (1 << 5) -#define R128_PC_MISC_CNTL 0x0188 -#define R128_PC_NGUI_CTLSTAT 0x0184 -# define R128_PC_FLUSH_GUI (3 << 0) -# define R128_PC_RI_GUI (1 << 2) -# define R128_PC_FLUSH_ALL 0x00ff -# define R128_PC_BUSY (1 << 31) -#define R128_PC_NGUI_MODE 0x0180 -#define R128_PCI_GART_PAGE 0x017c -#define R128_PLANE_3D_MASK_C 0x1d44 -#define R128_PLL_TEST_CNTL 0x0013 /* PLL */ -#define R128_PMI_CAP_ID 0x0f5c /* PCI */ -#define R128_PMI_DATA 0x0f63 /* PCI */ -#define R128_PMI_NXT_CAP_PTR 0x0f5d /* PCI */ -#define R128_PMI_PMC_REG 0x0f5e /* PCI */ -#define R128_PMI_PMCSR_REG 0x0f60 /* PCI */ -#define R128_PMI_REGISTER 0x0f5c /* PCI */ -#define R128_PPLL_CNTL 0x0002 /* PLL */ -# define R128_PPLL_RESET (1 << 0) -# define R128_PPLL_SLEEP (1 << 1) -# define R128_PPLL_ATOMIC_UPDATE_EN (1 << 16) -# define R128_PPLL_VGA_ATOMIC_UPDATE_EN (1 << 17) -#define R128_PPLL_DIV_0 0x0004 /* PLL */ -#define R128_PPLL_DIV_1 0x0005 /* PLL */ -#define R128_PPLL_DIV_2 0x0006 /* PLL */ -#define R128_PPLL_DIV_3 0x0007 /* PLL */ -# define R128_PPLL_FB3_DIV_MASK 0x07ff -# define R128_PPLL_POST3_DIV_MASK 0x00070000 -#define R128_PPLL_REF_DIV 0x0003 /* PLL */ -# define R128_PPLL_REF_DIV_MASK 0x03ff -# define R128_PPLL_ATOMIC_UPDATE_R (1 << 15) /* same as _W */ -# define R128_PPLL_ATOMIC_UPDATE_W (1 << 15) /* same as _R */ -#define R128_PWR_MNGMT_CNTL_STATUS 0x0f60 /* PCI */ -#define R128_REG_BASE 0x0f18 /* PCI */ -#define R128_REGPROG_INF 0x0f09 /* PCI */ -#define R128_REVISION_ID 0x0f08 /* PCI */ - -#define R128_SC_BOTTOM 0x164c -#define R128_SC_BOTTOM_RIGHT 0x16f0 -#define R128_SC_BOTTOM_RIGHT_C 0x1c8c -#define R128_SC_LEFT 0x1640 -#define R128_SC_RIGHT 0x1644 -#define R128_SC_TOP 0x1648 -#define R128_SC_TOP_LEFT 0x16ec -#define R128_SC_TOP_LEFT_C 0x1c88 -#define R128_SEQ8_DATA 0x03c5 /* VGA */ -#define R128_SEQ8_IDX 0x03c4 /* VGA */ -#define R128_SNAPSHOT_F_COUNT 0x0244 -#define R128_SNAPSHOT_VH_COUNTS 0x0240 -#define R128_SNAPSHOT_VIF_COUNT 0x024c -#define R128_SRC_OFFSET 0x15ac -#define R128_SRC_PITCH 0x15b0 -#define R128_SRC_PITCH_OFFSET 0x1428 -#define R128_SRC_SC_BOTTOM 0x165c -#define R128_SRC_SC_BOTTOM_RIGHT 0x16f4 -#define R128_SRC_SC_RIGHT 0x1654 -#define R128_SRC_X 0x1414 -#define R128_SRC_X_Y 0x1590 -#define R128_SRC_Y 0x1418 -#define R128_SRC_Y_X 0x1434 -#define R128_STATUS 0x0f06 /* PCI */ -#define R128_SUBPIC_CNTL 0x0540 /* ? */ -#define R128_SUB_CLASS 0x0f0a /* PCI */ -#define R128_SURFACE_DELAY 0x0b00 -#define R128_SURFACE0_INFO 0x0b0c -#define R128_SURFACE0_LOWER_BOUND 0x0b04 -#define R128_SURFACE0_UPPER_BOUND 0x0b08 -#define R128_SURFACE1_INFO 0x0b1c -#define R128_SURFACE1_LOWER_BOUND 0x0b14 -#define R128_SURFACE1_UPPER_BOUND 0x0b18 -#define R128_SURFACE2_INFO 0x0b2c -#define R128_SURFACE2_LOWER_BOUND 0x0b24 -#define R128_SURFACE2_UPPER_BOUND 0x0b28 -#define R128_SURFACE3_INFO 0x0b3c -#define R128_SURFACE3_LOWER_BOUND 0x0b34 -#define R128_SURFACE3_UPPER_BOUND 0x0b38 -#define R128_SW_SEMAPHORE 0x013c - -#define R128_TEST_DEBUG_CNTL 0x0120 -#define R128_TEST_DEBUG_MUX 0x0124 -#define R128_TEST_DEBUG_OUT 0x012c -#define R128_TMDS_CRC 0x02a0 -#define R128_TMDS_TRANSMITTER_CNTL 0x02a4 -# define R128_TMDS_PLLEN (1 << 0) -# define R128_TMDS_PLLRST (1 << 1) -#define R128_TRAIL_BRES_DEC 0x1614 -#define R128_TRAIL_BRES_ERR 0x160c -#define R128_TRAIL_BRES_INC 0x1610 -#define R128_TRAIL_X 0x1618 -#define R128_TRAIL_X_SUB 0x1620 - -#define R128_VCLK_ECP_CNTL 0x0008 /* PLL */ -# define R128_ECP_DIV_MASK (3 << 8) -#define R128_VENDOR_ID 0x0f00 /* PCI */ -#define R128_VGA_DDA_CONFIG 0x02e8 -#define R128_VGA_DDA_ON_OFF 0x02ec -#define R128_VID_BUFFER_CONTROL 0x0900 -#define R128_VIDEOMUX_CNTL 0x0190 -#define R128_VIPH_CONTROL 0x01D0 /* ? */ - -#define R128_WAIT_UNTIL 0x1720 - -#define R128_X_MPLL_REF_FB_DIV 0x000a /* PLL */ -#define R128_XCLK_CNTL 0x000d /* PLL */ -#define R128_XDLL_CNTL 0x000c /* PLL */ -#define R128_XPLL_CNTL 0x000b /* PLL */ - - /* Registers for CCE and Microcode Engine */ -#define R128_PM4_MICROCODE_ADDR 0x07d4 -#define R128_PM4_MICROCODE_RADDR 0x07d8 -#define R128_PM4_MICROCODE_DATAH 0x07dc -#define R128_PM4_MICROCODE_DATAL 0x07e0 - -#define R128_PM4_BUFFER_OFFSET 0x0700 -#define R128_PM4_BUFFER_CNTL 0x0704 -# define R128_PM4_NONPM4 (0 << 28) -# define R128_PM4_192PIO (1 << 28) -# define R128_PM4_192BM (2 << 28) -# define R128_PM4_128PIO_64INDBM (3 << 28) -# define R128_PM4_128BM_64INDBM (4 << 28) -# define R128_PM4_64PIO_128INDBM (5 << 28) -# define R128_PM4_64BM_128INDBM (6 << 28) -# define R128_PM4_64PIO_64VCBM_64INDBM (7 << 28) -# define R128_PM4_64BM_64VCBM_64INDBM (8 << 28) -# define R128_PM4_64PIO_64VCPIO_64INDPIO (15 << 28) -#define R128_PM4_BUFFER_WM_CNTL 0x0708 -# define R128_WMA_SHIFT 0 -# define R128_WMB_SHIFT 8 -# define R128_WMC_SHIFT 16 -# define R128_WB_WM_SHIFT 24 -#define R128_PM4_BUFFER_DL_RPTR_ADDR 0x070c -#define R128_PM4_BUFFER_DL_RPTR 0x0710 -#define R128_PM4_BUFFER_DL_WPTR 0x0714 -# define R128_PM4_BUFFER_DL_DONE (1 << 31) -#define R128_PM4_BUFFER_DL_WPTR_DELAY 0x0718 -# define R128_PRE_WRITE_TIMER_SHIFT 0 -# define R128_PRE_WRITE_LIMIT_SHIFT 23 -#define R128_PM4_VC_FPU_SETUP 0x071c -# define R128_FRONT_DIR_CW (0 << 0) -# define R128_FRONT_DIR_CCW (1 << 0) -# define R128_FRONT_DIR_MASK (1 << 0) -# define R128_BACKFACE_CULL (0 << 1) -# define R128_BACKFACE_POINTS (1 << 1) -# define R128_BACKFACE_LINES (2 << 1) -# define R128_BACKFACE_SOLID (3 << 1) -# define R128_BACKFACE_MASK (3 << 1) -# define R128_FRONTFACE_CULL (0 << 3) -# define R128_FRONTFACE_POINTS (1 << 3) -# define R128_FRONTFACE_LINES (2 << 3) -# define R128_FRONTFACE_SOLID (3 << 3) -# define R128_FRONTFACE_MASK (3 << 3) -# define R128_FPU_COLOR_SOLID (0 << 5) -# define R128_FPU_COLOR_FLAT (1 << 5) -# define R128_FPU_COLOR_GOURAUD (2 << 5) -# define R128_FPU_COLOR_GOURAUD2 (3 << 5) -# define R128_FPU_COLOR_MASK (3 << 5) -# define R128_FPU_SUB_PIX_2BITS (0 << 7) -# define R128_FPU_SUB_PIX_4BITS (1 << 7) -# define R128_FPU_MODE_2D (0 << 8) -# define R128_FPU_MODE_3D (1 << 8) -# define R128_TRAP_BITS_DISABLE (1 << 9) -# define R128_EDGE_ANTIALIAS (1 << 10) -# define R128_SUPERSAMPLE (1 << 11) -# define R128_XFACTOR_2 (0 << 12) -# define R128_XFACTOR_4 (1 << 12) -# define R128_YFACTOR_2 (0 << 13) -# define R128_YFACTOR_4 (1 << 13) -# define R128_FLAT_SHADE_VERTEX_D3D (0 << 14) -# define R128_FLAT_SHADE_VERTEX_OGL (1 << 14) -# define R128_FPU_ROUND_TRUNCATE (0 << 15) -# define R128_FPU_ROUND_NEAREST (1 << 15) -# define R128_WM_SEL_8DW (0 << 16) -# define R128_WM_SEL_16DW (1 << 16) -# define R128_WM_SEL_32DW (2 << 16) -#define R128_PM4_VC_DEBUG_CONFIG 0x07a4 -#define R128_PM4_VC_STAT 0x07a8 -#define R128_PM4_VC_TIMESTAMP0 0x07b0 -#define R128_PM4_VC_TIMESTAMP1 0x07b4 -#define R128_PM4_STAT 0x07b8 -# define R128_PM4_FIFOCNT_MASK 0x0fff -# define R128_PM4_BUSY (1 << 16) -# define R128_PM4_GUI_ACTIVE (1 << 31) -#define R128_PM4_BUFFER_ADDR 0x07f0 -#define R128_PM4_MICRO_CNTL 0x07fc -# define R128_PM4_MICRO_FREERUN (1 << 30) -#define R128_PM4_FIFO_DATA_EVEN 0x1000 -#define R128_PM4_FIFO_DATA_ODD 0x1004 - -#define R128_SCALE_3D_CNTL 0x1a00 -# define R128_SCALE_DITHER_ERR_DIFF (0 << 1) -# define R128_SCALE_DITHER_TABLE (1 << 1) -# define R128_TEX_CACHE_SIZE_FULL (0 << 2) -# define R128_TEX_CACHE_SIZE_HALF (1 << 2) -# define R128_DITHER_INIT_CURR (0 << 3) -# define R128_DITHER_INIT_RESET (1 << 3) -# define R128_ROUND_24BIT (1 << 4) -# define R128_TEX_CACHE_DISABLE (1 << 5) -# define R128_SCALE_3D_NOOP (0 << 6) -# define R128_SCALE_3D_SCALE (1 << 6) -# define R128_SCALE_3D_TEXMAP_SHADE (2 << 6) -# define R128_SCALE_PIX_BLEND (0 << 8) -# define R128_SCALE_PIX_REPLICATE (1 << 8) -# define R128_TEX_CACHE_SPLIT (1 << 9) -# define R128_APPLE_YUV_MODE (1 << 10) -# define R128_TEX_CACHE_PALLETE_MODE (1 << 11) -# define R128_ALPHA_COMB_ADD_CLAMP (0 << 12) -# define R128_ALPHA_COMB_ADD_NCLAMP (1 << 12) -# define R128_ALPHA_COMB_SUB_SRC_DST_CLAMP (2 << 12) -# define R128_ALPHA_COMB_SUB_SRC_DST_NCLAMP (3 << 12) -# define R128_ALPHA_COMB_FCN_MASK (3 << 12) -# define R128_FOG_VERTEX (0 << 14) -# define R128_FOG_TABLE (1 << 14) -# define R128_SIGNED_DST_CLAMP (1 << 15) - -# define R128_ALPHA_BLEND_ZERO (0 ) -# define R128_ALPHA_BLEND_ONE (1 ) -# define R128_ALPHA_BLEND_SRCCOLOR (2 ) -# define R128_ALPHA_BLEND_INVSRCCOLOR (3 ) -# define R128_ALPHA_BLEND_SRCALPHA (4 ) -# define R128_ALPHA_BLEND_INVSRCALPHA (5 ) -# define R128_ALPHA_BLEND_DSTALPHA (6 ) -# define R128_ALPHA_BLEND_INVDSTALPHA (7 ) -# define R128_ALPHA_BLEND_DSTCOLOR (8 ) -# define R128_ALPHA_BLEND_INVDSTCOLOR (9 ) -# define R128_ALPHA_BLEND_SAT (10) /* aka SRCALPHASAT */ -# define R128_ALPHA_BLEND_BLEND (11) /* aka BOTHSRCALPHA */ -# define R128_ALPHA_BLEND_INVBLEND (12) /* aka BOTHINVSRCALPHA */ -# define R128_ALPHA_BLEND_MASK (15) - -# define R128_ALPHA_BLEND_SRC_SHIFT (16) -# define R128_ALPHA_BLEND_DST_SHIFT (20) - -# define R128_ALPHA_TEST_NEVER (0 << 24) -# define R128_ALPHA_TEST_LESS (1 << 24) -# define R128_ALPHA_TEST_LESSEQUAL (2 << 24) -# define R128_ALPHA_TEST_EQUAL (3 << 24) -# define R128_ALPHA_TEST_GREATEREQUAL (4 << 24) -# define R128_ALPHA_TEST_GREATER (5 << 24) -# define R128_ALPHA_TEST_NEQUAL (6 << 24) -# define R128_ALPHA_TEST_ALWAYS (7 << 24) -# define R128_ALPHA_TEST_MASK (7 << 24) -# define R128_COMPOSITE_SHADOW_CMP_EQUAL (0 << 28) -# define R128_COMPOSITE_SHADOW_CMP_NEQUAL (1 << 28) -# define R128_COMPOSITE_SHADOW (1 << 29) -# define R128_TEX_MAP_ALPHA_IN_TEXTURE (1 << 30) -# define R128_TEX_CACHE_LINE_SIZE_8QW (0 << 31) -# define R128_TEX_CACHE_LINE_SIZE_4QW (1 << 31) -#define R128_SCALE_3D_DATATYPE 0x1a20 - -#define R128_SETUP_CNTL 0x1bc4 -# define R128_DONT_START_TRIANGLE (1 << 0) -# define R128_Z_BIAS (0 << 1) -# define R128_DONT_START_ANY_ON (1 << 2) -# define R128_COLOR_SOLID_COLOR (0 << 3) -# define R128_COLOR_FLAT_VERT_1 (1 << 3) -# define R128_COLOR_FLAT_VERT_2 (2 << 3) -# define R128_COLOR_FLAT_VERT_3 (3 << 3) -# define R128_COLOR_GOURAUD (4 << 3) -# define R128_PRIM_TYPE_TRI (0 << 7) -# define R128_PRIM_TYPE_LINE (1 << 7) -# define R128_PRIM_TYPE_POINT (2 << 7) -# define R128_PRIM_TYPE_POLY_EDGE (3 << 7) -# define R128_TEXTURE_ST_MULT_W (0 << 9) -# define R128_TEXTURE_ST_DIRECT (1 << 9) -# define R128_STARTING_VERTEX_1 (1 << 14) -# define R128_STARTING_VERTEX_2 (2 << 14) -# define R128_STARTING_VERTEX_3 (3 << 14) -# define R128_ENDING_VERTEX_1 (1 << 16) -# define R128_ENDING_VERTEX_2 (2 << 16) -# define R128_ENDING_VERTEX_3 (3 << 16) -# define R128_SU_POLY_LINE_LAST (0 << 18) -# define R128_SU_POLY_LINE_NOT_LAST (1 << 18) -# define R128_SUB_PIX_2BITS (0 << 19) -# define R128_SUB_PIX_4BITS (1 << 19) -# define R128_SET_UP_CONTINUE (1 << 31) - -#define R128_WINDOW_XY_OFFSET 0x1bcc -# define R128_WINDOW_Y_SHIFT 4 -# define R128_WINDOW_X_SHIFT 20 - -#define R128_Z_OFFSET_C 0x1c90 -#define R128_Z_PITCH_C 0x1c94 -# define R128_Z_TILE (1 << 16) -#define R128_Z_STEN_CNTL_C 0x1c98 -# define R128_Z_PIX_WIDTH_16 (0 << 1) -# define R128_Z_PIX_WIDTH_24 (1 << 1) -# define R128_Z_PIX_WIDTH_32 (2 << 1) -# define R128_Z_PIX_WIDTH_MASK (3 << 1) -# define R128_Z_TEST_NEVER (0 << 4) -# define R128_Z_TEST_LESS (1 << 4) -# define R128_Z_TEST_LESSEQUAL (2 << 4) -# define R128_Z_TEST_EQUAL (3 << 4) -# define R128_Z_TEST_GREATEREQUAL (4 << 4) -# define R128_Z_TEST_GREATER (5 << 4) -# define R128_Z_TEST_NEQUAL (6 << 4) -# define R128_Z_TEST_ALWAYS (7 << 4) -# define R128_Z_TEST_MASK (7 << 4) -# define R128_STENCIL_TEST_NEVER (0 << 12) -# define R128_STENCIL_TEST_LESS (1 << 12) -# define R128_STENCIL_TEST_LESSEQUAL (2 << 12) -# define R128_STENCIL_TEST_EQUAL (3 << 12) -# define R128_STENCIL_TEST_GREATEREQUAL (4 << 12) -# define R128_STENCIL_TEST_GREATER (5 << 12) -# define R128_STENCIL_TEST_NEQUAL (6 << 12) -# define R128_STENCIL_TEST_ALWAYS (7 << 12) -# define R128_STENCIL_S_FAIL_KEEP (0 << 16) -# define R128_STENCIL_S_FAIL_ZERO (1 << 16) -# define R128_STENCIL_S_FAIL_REPLACE (2 << 16) -# define R128_STENCIL_S_FAIL_INC (3 << 16) -# define R128_STENCIL_S_FAIL_DEC (4 << 16) -# define R128_STENCIL_S_FAIL_INV (5 << 16) -# define R128_STENCIL_ZPASS_KEEP (0 << 20) -# define R128_STENCIL_ZPASS_ZERO (1 << 20) -# define R128_STENCIL_ZPASS_REPLACE (2 << 20) -# define R128_STENCIL_ZPASS_INC (3 << 20) -# define R128_STENCIL_ZPASS_DEC (4 << 20) -# define R128_STENCIL_ZPASS_INV (5 << 20) -# define R128_STENCIL_ZFAIL_KEEP (0 << 24) -# define R128_STENCIL_ZFAIL_ZERO (1 << 24) -# define R128_STENCIL_ZFAIL_REPLACE (2 << 24) -# define R128_STENCIL_ZFAIL_INC (3 << 24) -# define R128_STENCIL_ZFAIL_DEC (4 << 24) -# define R128_STENCIL_ZFAIL_INV (5 << 24) -#define R128_TEX_CNTL_C 0x1c9c -# define R128_Z_ENABLE (1 << 0) -# define R128_Z_WRITE_ENABLE (1 << 1) -# define R128_STENCIL_ENABLE (1 << 3) -# define R128_SHADE_ENABLE (0 << 4) -# define R128_TEXMAP_ENABLE (1 << 4) -# define R128_SEC_TEXMAP_ENABLE (1 << 5) -# define R128_FOG_ENABLE (1 << 7) -# define R128_DITHER_ENABLE (1 << 8) -# define R128_ALPHA_ENABLE (1 << 9) -# define R128_ALPHA_TEST_ENABLE (1 << 10) -# define R128_SPEC_LIGHT_ENABLE (1 << 11) -# define R128_TEX_CHROMA_KEY_ENABLE (1 << 12) -# define R128_ALPHA_IN_TEX_COMPLETE_A (0 << 13) -# define R128_ALPHA_IN_TEX_LSB_A (1 << 13) -# define R128_LIGHT_DIS (0 << 14) -# define R128_LIGHT_COPY (1 << 14) -# define R128_LIGHT_MODULATE (2 << 14) -# define R128_LIGHT_ADD (3 << 14) -# define R128_LIGHT_BLEND_CONSTANT (4 << 14) -# define R128_LIGHT_BLEND_TEXTURE (5 << 14) -# define R128_LIGHT_BLEND_VERTEX (6 << 14) -# define R128_LIGHT_BLEND_CONST_COLOR (7 << 14) -# define R128_ALPHA_LIGHT_DIS (0 << 18) -# define R128_ALPHA_LIGHT_COPY (1 << 18) -# define R128_ALPHA_LIGHT_MODULATE (2 << 18) -# define R128_ALPHA_LIGHT_ADD (3 << 18) -# define R128_ANTI_ALIAS (1 << 21) -# define R128_TEX_CACHE_FLUSH (1 << 23) -# define R128_LOD_BIAS_SHIFT 24 -# define R128_LOD_BIAS_MASK (0xff << 24) -#define R128_MISC_3D_STATE_CNTL_REG 0x1ca0 -# define R128_REF_ALPHA_MASK 0xff -# define R128_MISC_SCALE_3D_NOOP (0 << 8) -# define R128_MISC_SCALE_3D_SCALE (1 << 8) -# define R128_MISC_SCALE_3D_TEXMAP_SHADE (2 << 8) -# define R128_MISC_SCALE_PIX_BLEND (0 << 10) -# define R128_MISC_SCALE_PIX_REPLICATE (1 << 10) -/* Bits [14:12] are the same as R128_SCALE_3D_CNTL */ -/* Bit [15] is unknown */ -/* Bits [26:16] are the same as R128_SCALE_3D_CNTL */ -/* Bits [31:27] are unknown */ - -#define R128_TEXTURE_CLR_CMP_CLR_C 0x1ca4 -#define R128_TEXTURE_CLR_CMP_MSK_C 0x1ca8 -#define R128_FOG_COLOR_C 0x1cac -# define R128_FOG_BLUE_SHIFT 0 -# define R128_FOG_GREEN_SHIFT 8 -# define R128_FOG_RED_SHIFT 16 -#define R128_PRIM_TEX_CNTL_C 0x1cb0 -# define R128_MIN_BLEND_NEAREST (0 << 1) -# define R128_MIN_BLEND_LINEAR (1 << 1) -# define R128_MIN_BLEND_MIPNEAREST (2 << 1) -# define R128_MIN_BLEND_MIPLINEAR (3 << 1) -# define R128_MIN_BLEND_LINEARMIPNEAREST (4 << 1) -# define R128_MIN_BLEND_LINEARMIPLINEAR (5 << 1) -# define R128_MIN_BLEND_MASK (7 << 1) -# define R128_MAG_BLEND_NEAREST (0 << 4) -# define R128_MAG_BLEND_LINEAR (1 << 4) -# define R128_MAG_BLEND_MASK (7 << 4) -# define R128_MIP_MAP_DISABLE (1 << 7) -# define R128_TEX_CLAMP_S_WRAP (0 << 8) -# define R128_TEX_CLAMP_S_MIRROR (1 << 8) -# define R128_TEX_CLAMP_S_CLAMP (2 << 8) -# define R128_TEX_CLAMP_S_BORDER_COLOR (3 << 8) -# define R128_TEX_CLAMP_S_MASK (3 << 8) -# define R128_TEX_WRAP_S (1 << 10) -# define R128_TEX_CLAMP_T_WRAP (0 << 11) -# define R128_TEX_CLAMP_T_MIRROR (1 << 11) -# define R128_TEX_CLAMP_T_CLAMP (2 << 11) -# define R128_TEX_CLAMP_T_BORDER_COLOR (3 << 11) -# define R128_TEX_CLAMP_T_MASK (3 << 11) -# define R128_TEX_WRAP_T (1 << 13) -# define R128_TEX_PERSPECTIVE_DISABLE (1 << 14) -# define R128_DATATYPE_VQ (0 << 16) -# define R128_DATATYPE_CI4 (1 << 16) -# define R128_DATATYPE_CI8 (2 << 16) -# define R128_DATATYPE_ARGB1555 (3 << 16) -# define R128_DATATYPE_RGB565 (4 << 16) -# define R128_DATATYPE_RGB888 (5 << 16) -# define R128_DATATYPE_ARGB8888 (6 << 16) -# define R128_DATATYPE_RGB332 (7 << 16) -# define R128_DATATYPE_Y8 (8 << 16) -# define R128_DATATYPE_RGB8 (9 << 16) -# define R128_DATATYPE_CI16 (10 << 16) -# define R128_DATATYPE_YVYU422 (11 << 16) -# define R128_DATATYPE_VYUY422 (12 << 16) -# define R128_DATATYPE_AYUV444 (14 << 16) -# define R128_DATATYPE_ARGB4444 (15 << 16) -# define R128_PALLETE_EITHER (0 << 20) -# define R128_PALLETE_1 (1 << 20) -# define R128_PALLETE_2 (2 << 20) -# define R128_PSEUDOCOLOR_DT_RGB565 (0 << 24) -# define R128_PSEUDOCOLOR_DT_ARGB1555 (1 << 24) -# define R128_PSEUDOCOLOR_DT_ARGB4444 (2 << 24) -#define R128_PRIM_TEXTURE_COMBINE_CNTL_C 0x1cb4 -# define R128_COMB_DIS (0 << 0) -# define R128_COMB_COPY (1 << 0) -# define R128_COMB_COPY_INP (2 << 0) -# define R128_COMB_MODULATE (3 << 0) -# define R128_COMB_MODULATE2X (4 << 0) -# define R128_COMB_MODULATE4X (5 << 0) -# define R128_COMB_ADD (6 << 0) -# define R128_COMB_ADD_SIGNED (7 << 0) -# define R128_COMB_BLEND_VERTEX (8 << 0) -# define R128_COMB_BLEND_TEXTURE (9 << 0) -# define R128_COMB_BLEND_CONST (10 << 0) -# define R128_COMB_BLEND_PREMULT (11 << 0) -# define R128_COMB_BLEND_PREV (12 << 0) -# define R128_COMB_BLEND_PREMULT_INV (13 << 0) -# define R128_COMB_ADD_SIGNED2X (14 << 0) -# define R128_COMB_BLEND_CONST_COLOR (15 << 0) -# define R128_COMB_MASK (15 << 0) -# define R128_COLOR_FACTOR_CONST_COLOR (0 << 4) -# define R128_COLOR_FACTOR_NCONST_COLOR (1 << 4) -# define R128_COLOR_FACTOR_TEX (4 << 4) -# define R128_COLOR_FACTOR_NTEX (5 << 4) -# define R128_COLOR_FACTOR_ALPHA (6 << 4) -# define R128_COLOR_FACTOR_NALPHA (7 << 4) -# define R128_COLOR_FACTOR_PREV_COLOR (8 << 4) -# define R128_COLOR_FACTOR_MASK (15 << 4) -# define R128_COMB_FCN_MSB (1 << 8) -# define R128_INPUT_FACTOR_CONST_COLOR (2 << 10) -# define R128_INPUT_FACTOR_CONST_ALPHA (3 << 10) -# define R128_INPUT_FACTOR_INT_COLOR (4 << 10) -# define R128_INPUT_FACTOR_INT_ALPHA (5 << 10) -# define R128_INPUT_FACTOR_MASK (15 << 10) -# define R128_COMB_ALPHA_DIS (0 << 14) -# define R128_COMB_ALPHA_COPY (1 << 14) -# define R128_COMB_ALPHA_COPY_INP (2 << 14) -# define R128_COMB_ALPHA_MODULATE (3 << 14) -# define R128_COMB_ALPHA_MODULATE2X (4 << 14) -# define R128_COMB_ALPHA_MODULATE4X (5 << 14) -# define R128_COMB_ALPHA_ADD (6 << 14) -# define R128_COMB_ALPHA_ADD_SIGNED (7 << 14) -# define R128_COMB_ALPHA_ADD_SIGNED2X (14 << 14) -# define R128_COMB_ALPHA_MASK (15 << 14) -# define R128_ALPHA_FACTOR_TEX_ALPHA (6 << 18) -# define R128_ALPHA_FACTOR_NTEX_ALPHA (7 << 18) -# define R128_ALPHA_FACTOR_MASK (15 << 18) -# define R128_INP_FACTOR_A_CONST_ALPHA (1 << 25) -# define R128_INP_FACTOR_A_INT_ALPHA (2 << 25) -# define R128_INP_FACTOR_A_MASK (7 << 25) -#define R128_TEX_SIZE_PITCH_C 0x1cb8 -# define R128_TEX_PITCH_SHIFT 0 -# define R128_TEX_SIZE_SHIFT 4 -# define R128_TEX_HEIGHT_SHIFT 8 -# define R128_TEX_MIN_SIZE_SHIFT 12 -# define R128_SEC_TEX_PITCH_SHIFT 16 -# define R128_SEC_TEX_SIZE_SHIFT 20 -# define R128_SEC_TEX_HEIGHT_SHIFT 24 -# define R128_SEC_TEX_MIN_SIZE_SHIFT 28 -# define R128_TEX_PITCH_MASK (0x0f << 0) -# define R128_TEX_SIZE_MASK (0x0f << 4) -# define R128_TEX_HEIGHT_MASK (0x0f << 8) -# define R128_TEX_MIN_SIZE_MASK (0x0f << 12) -# define R128_SEC_TEX_PITCH_MASK (0x0f << 16) -# define R128_SEC_TEX_SIZE_MASK (0x0f << 20) -# define R128_SEC_TEX_HEIGHT_MASK (0x0f << 24) -# define R128_SEC_TEX_MIN_SIZE_MASK (0x0f << 28) -# define R128_TEX_SIZE_PITCH_SHIFT 0 -# define R128_SEC_TEX_SIZE_PITCH_SHIFT 16 -# define R128_TEX_SIZE_PITCH_MASK (0xffff << 0) -# define R128_SEC_TEX_SIZE_PITCH_MASK (0xffff << 16) -#define R128_PRIM_TEX_0_OFFSET_C 0x1cbc -#define R128_PRIM_TEX_1_OFFSET_C 0x1cc0 -#define R128_PRIM_TEX_2_OFFSET_C 0x1cc4 -#define R128_PRIM_TEX_3_OFFSET_C 0x1cc8 -#define R128_PRIM_TEX_4_OFFSET_C 0x1ccc -#define R128_PRIM_TEX_5_OFFSET_C 0x1cd0 -#define R128_PRIM_TEX_6_OFFSET_C 0x1cd4 -#define R128_PRIM_TEX_7_OFFSET_C 0x1cd8 -#define R128_PRIM_TEX_8_OFFSET_C 0x1cdc -#define R128_PRIM_TEX_9_OFFSET_C 0x1ce0 -#define R128_PRIM_TEX_10_OFFSET_C 0x1ce4 -# define R128_TEX_NO_TILE (0 << 30) -# define R128_TEX_TILED_BY_HOST (1 << 30) -# define R128_TEX_TILED_BY_STORAGE (2 << 30) -# define R128_TEX_TILED_BY_STORAGE2 (3 << 30) - -#define R128_SEC_TEX_CNTL_C 0x1d00 -# define R128_SEC_SELECT_PRIM_ST (0 << 0) -# define R128_SEC_SELECT_SEC_ST (1 << 0) -#define R128_SEC_TEX_COMBINE_CNTL_C 0x1d04 -# define R128_INPUT_FACTOR_PREV_COLOR (8 << 10) -# define R128_INPUT_FACTOR_PREV_ALPHA (9 << 10) -# define R128_INP_FACTOR_A_PREV_ALPHA (4 << 25) -#define R128_SEC_TEX_0_OFFSET_C 0x1d08 -#define R128_SEC_TEX_1_OFFSET_C 0x1d0c -#define R128_SEC_TEX_2_OFFSET_C 0x1d10 -#define R128_SEC_TEX_3_OFFSET_C 0x1d14 -#define R128_SEC_TEX_4_OFFSET_C 0x1d18 -#define R128_SEC_TEX_5_OFFSET_C 0x1d1c -#define R128_SEC_TEX_6_OFFSET_C 0x1d20 -#define R128_SEC_TEX_7_OFFSET_C 0x1d24 -#define R128_SEC_TEX_8_OFFSET_C 0x1d28 -#define R128_SEC_TEX_9_OFFSET_C 0x1d2c -#define R128_SEC_TEX_10_OFFSET_C 0x1d30 -#define R128_CONSTANT_COLOR_C 0x1d34 -# define R128_CONSTANT_BLUE_SHIFT 0 -# define R128_CONSTANT_GREEN_SHIFT 8 -# define R128_CONSTANT_RED_SHIFT 16 -# define R128_CONSTANT_ALPHA_SHIFT 24 -#define R128_PRIM_TEXTURE_BORDER_COLOR_C 0x1d38 -# define R128_PRIM_TEX_BORDER_BLUE_SHIFT 0 -# define R128_PRIM_TEX_BORDER_GREEN_SHIFT 8 -# define R128_PRIM_TEX_BORDER_RED_SHIFT 16 -# define R128_PRIM_TEX_BORDER_ALPHA_SHIFT 24 -#define R128_SEC_TEXTURE_BORDER_COLOR_C 0x1d3c -# define R128_SEC_TEX_BORDER_BLUE_SHIFT 0 -# define R128_SEC_TEX_BORDER_GREEN_SHIFT 8 -# define R128_SEC_TEX_BORDER_RED_SHIFT 16 -# define R128_SEC_TEX_BORDER_ALPHA_SHIFT 24 -#define R128_STEN_REF_MASK_C 0x1d40 -# define R128_STEN_REFERENCE_SHIFT 0 -# define R128_STEN_MASK_SHIFT 16 -# define R128_STEN_WRITE_MASK_SHIFT 24 -#define R128_PLANE_3D_MASK_C 0x1d44 -#define R128_TEX_CACHE_STAT_COUNT 0x1974 - - - /* Constants */ -#define R128_AGP_TEX_OFFSET 0x02000000 - -#define R128_LAST_FRAME_REG R128_GUI_SCRATCH_REG0 - - /* CCE packet types */ -#define R128_CCE_PACKET0 0x00000000 -#define R128_CCE_PACKET0_ONE_REG_WR 0x00008000 -#define R128_CCE_PACKET1 0x40000000 -#define R128_CCE_PACKET2 0x80000000 -#define R128_CCE_PACKET3 0xC0000000 -#define R128_CCE_PACKET3_NOP 0xC0001000 -#define R128_CCE_PACKET3_PAINT 0xC0001100 -#define R128_CCE_PACKET3_BITBLT 0xC0001200 -#define R128_CCE_PACKET3_SMALLTEXT 0xC0001300 -#define R128_CCE_PACKET3_HOSTDATA_BLT 0xC0001400 -#define R128_CCE_PACKET3_POLYLINE 0xC0001500 -#define R128_CCE_PACKET3_SCALING 0xC0001600 -#define R128_CCE_PACKET3_TRANS_SCALING 0xC0001700 -#define R128_CCE_PACKET3_POLYSCANLINES 0xC0001800 -#define R128_CCE_PACKET3_NEXT_CHAR 0xC0001900 -#define R128_CCE_PACKET3_PAINT_MULTI 0xC0001A00 -#define R128_CCE_PACKET3_BITBLT_MULTI 0xC0001B00 -#define R128_CCE_PACKET3_PLY_NEXTSCAN 0xC0001D00 -#define R128_CCE_PACKET3_SET_SCISSORS 0xC0001E00 -#define R128_CCE_PACKET3_SET_MODE24BPP 0xC0001F00 -#define R128_CCE_PACKET3_CNTL_PAINT 0xC0009100 -#define R128_CCE_PACKET3_CNTL_BITBLT 0xC0009200 -#define R128_CCE_PACKET3_CNTL_SMALLTEXT 0xC0009300 -#define R128_CCE_PACKET3_CNTL_HOSTDATA_BLT 0xC0009400 -#define R128_CCE_PACKET3_CNTL_POLYLINE 0xC0009500 -#define R128_CCE_PACKET3_CNTL_SCALING 0xC0009600 -#define R128_CCE_PACKET3_CNTL_TRANS_SCALING 0xC0009700 -#define R128_CCE_PACKET3_CNTL_POLYSCANLINES 0xC0009800 -#define R128_CCE_PACKET3_CNTL_NEXT_CHAR 0xC0009900 -#define R128_CCE_PACKET3_CNTL_PAINT_MULTI 0xC0009A00 -#define R128_CCE_PACKET3_CNTL_BITBLT_MULTI 0xC0009B00 -#define R128_CCE_PACKET3_CNTL_TRANS_BITBLT 0xC0009C00 -#define R128_CCE_PACKET3_3D_SAVE_CONTEXT 0xC0002000 -#define R128_CCE_PACKET3_3D_PLAY_CONTEXT 0xC0002100 -#define R128_CCE_PACKET3_3D_RNDR_GEN_INDX_PRIM 0xC0002300 -#define R128_CCE_PACKET3_3D_RNDR_GEN_PRIM 0xC0002500 -#define R128_CCE_PACKET3_LOAD_PALETTE 0xC0002C00 -#define R128_CCE_PACKET3_PURGE 0xC0002D00 -#define R128_CCE_PACKET3_NEXT_VERTEX_BUNDLE 0xC0002E00 -# define R128_CCE_PACKET_MASK 0xC0000000 -# define R128_CCE_PACKET_COUNT_MASK 0x3fff0000 -# define R128_CCE_PACKET_MAX_DWORDS (1 << 12) -# define R128_CCE_PACKET0_REG_MASK 0x000007ff -# define R128_CCE_PACKET1_REG0_MASK 0x000007ff -# define R128_CCE_PACKET1_REG1_MASK 0x003ff800 - -#define R128_CCE_VC_FRMT_RHW 0x00000001 -#define R128_CCE_VC_FRMT_DIFFUSE_BGR 0x00000002 -#define R128_CCE_VC_FRMT_DIFFUSE_A 0x00000004 -#define R128_CCE_VC_FRMT_DIFFUSE_ARGB 0x00000008 -#define R128_CCE_VC_FRMT_SPEC_BGR 0x00000010 -#define R128_CCE_VC_FRMT_SPEC_F 0x00000020 -#define R128_CCE_VC_FRMT_SPEC_FRGB 0x00000040 -#define R128_CCE_VC_FRMT_S_T 0x00000080 -#define R128_CCE_VC_FRMT_S2_T2 0x00000100 -#define R128_CCE_VC_FRMT_RHW2 0x00000200 - -#define R128_CCE_VC_CNTL_PRIM_TYPE_NONE 0x00000000 -#define R128_CCE_VC_CNTL_PRIM_TYPE_POINT 0x00000001 -#define R128_CCE_VC_CNTL_PRIM_TYPE_LINE 0x00000002 -#define R128_CCE_VC_CNTL_PRIM_TYPE_POLY_LINE 0x00000003 -#define R128_CCE_VC_CNTL_PRIM_TYPE_TRI_LIST 0x00000004 -#define R128_CCE_VC_CNTL_PRIM_TYPE_TRI_FAN 0x00000005 -#define R128_CCE_VC_CNTL_PRIM_TYPE_TRI_STRIP 0x00000006 -#define R128_CCE_VC_CNTL_PRIM_TYPE_TRI_TYPE2 0x00000007 -#define R128_CCE_VC_CNTL_PRIM_WALK_IND 0x00000010 -#define R128_CCE_VC_CNTL_PRIM_WALK_LIST 0x00000020 -#define R128_CCE_VC_CNTL_PRIM_WALK_RING 0x00000030 -#define R128_CCE_VC_CNTL_NUM_SHIFT 16 - -/* hmm copyed blindly (no specs) from radeon.h ... */ -#define R128_RE_TOP_LEFT 0x26c0 -# define R128_RE_LEFT_SHIFT 0 -# define R128_RE_TOP_SHIFT 16 -#define R128_RE_WIDTH_HEIGHT 0x1c44 -# define R128_RE_WIDTH_SHIFT 0 -# define R128_RE_HEIGHT_SHIFT 16 - -#endif diff --git a/src/r128_sarea.h b/src/r128_sarea.h deleted file mode 100644 index 63f432b8..00000000 --- a/src/r128_sarea.h +++ /dev/null @@ -1,197 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_sarea.h,v 1.7 2002/02/16 21:26:35 herrb Exp $ */ -/* - * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, - * Precision Insight, Inc., Cedar Park, Texas, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX - * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@valinux.com> - * Gareth Hughes <gareth@valinux.com> - * - */ - -#ifndef _R128_SAREA_H_ -#define _R128_SAREA_H_ - -#include "Xmd.h" - -/* WARNING: If you change any of these defines, make sure to change the - * defines in the kernel file (r128_drm.h) - */ -#ifndef __R128_SAREA_DEFINES__ -#define __R128_SAREA_DEFINES__ - -/* What needs to be changed for the current vertex buffer? - */ -#define R128_UPLOAD_CONTEXT 0x001 -#define R128_UPLOAD_SETUP 0x002 -#define R128_UPLOAD_TEX0 0x004 -#define R128_UPLOAD_TEX1 0x008 -#define R128_UPLOAD_TEX0IMAGES 0x010 -#define R128_UPLOAD_TEX1IMAGES 0x020 -#define R128_UPLOAD_CORE 0x040 -#define R128_UPLOAD_MASKS 0x080 -#define R128_UPLOAD_WINDOW 0x100 -#define R128_UPLOAD_CLIPRECTS 0x200 /* handled client-side */ -#define R128_REQUIRE_QUIESCENCE 0x400 -#define R128_UPLOAD_ALL 0x7ff - -#define R128_FRONT 0x1 -#define R128_BACK 0x2 -#define R128_DEPTH 0x4 - -/* Primitive types - */ -#define R128_POINTS 0x1 -#define R128_LINES 0x2 -#define R128_LINE_STRIP 0x3 -#define R128_TRIANGLES 0x4 -#define R128_TRIANGLE_FAN 0x5 -#define R128_TRIANGLE_STRIP 0x6 - -/* Vertex/indirect buffer size - */ -#define R128_BUFFER_SIZE 16384 - -/* Byte offsets for indirect buffer data - */ -#define R128_INDEX_PRIM_OFFSET 20 -#define R128_HOSTDATA_BLIT_OFFSET 32 - -/* Keep these small for testing - */ -#define R128_NR_SAREA_CLIPRECTS 12 - -/* There are 2 heaps (local/AGP). Each region within a heap is a - * minimum of 64k, and there are at most 64 of them per heap. - */ -#define R128_CARD_HEAP 0 -#define R128_AGP_HEAP 1 -#define R128_NR_TEX_HEAPS 2 -#define R128_NR_TEX_REGIONS 64 -#define R128_LOG_TEX_GRANULARITY 16 - -#define R128_NR_CONTEXT_REGS 12 - -#define R128_MAX_TEXTURE_LEVELS 11 -#define R128_MAX_TEXTURE_UNITS 2 - -#endif /* __R128_SAREA_DEFINES__ */ - -typedef struct { - /* Context state - can be written in one large chunk */ - unsigned int dst_pitch_offset_c; - unsigned int dp_gui_master_cntl_c; - unsigned int sc_top_left_c; - unsigned int sc_bottom_right_c; - unsigned int z_offset_c; - unsigned int z_pitch_c; - unsigned int z_sten_cntl_c; - unsigned int tex_cntl_c; - unsigned int misc_3d_state_cntl_reg; - unsigned int texture_clr_cmp_clr_c; - unsigned int texture_clr_cmp_msk_c; - unsigned int fog_color_c; - - /* Texture state */ - unsigned int tex_size_pitch_c; - unsigned int constant_color_c; - - /* Setup state */ - unsigned int pm4_vc_fpu_setup; - unsigned int setup_cntl; - - /* Mask state */ - unsigned int dp_write_mask; - unsigned int sten_ref_mask_c; - unsigned int plane_3d_mask_c; - - /* Window state */ - unsigned int window_xy_offset; - - /* Core state */ - unsigned int scale_3d_cntl; -} r128_context_regs_t; - -/* Setup registers for each texture unit - */ -typedef struct { - unsigned int tex_cntl; - unsigned int tex_combine_cntl; - unsigned int tex_size_pitch; - unsigned int tex_offset[R128_MAX_TEXTURE_LEVELS]; - unsigned int tex_border_color; -} r128_texture_regs_t; - -typedef struct { - /* The channel for communication of state information to the kernel - * on firing a vertex buffer. - */ - r128_context_regs_t ContextState; - r128_texture_regs_t TexState[R128_MAX_TEXTURE_UNITS]; - unsigned int dirty; - unsigned int vertsize; - unsigned int vc_format; - -#ifdef XF86DRI - /* The current cliprects, or a subset thereof. - */ - drm_clip_rect_t boxes[R128_NR_SAREA_CLIPRECTS]; - unsigned int nbox; -#endif - - /* Counters for throttling of rendering clients. - */ - unsigned int last_frame; - unsigned int last_dispatch; - - /* Maintain an LRU of contiguous regions of texture space. If you - * think you own a region of texture memory, and it has an age - * different to the one you set, then you are mistaken and it has - * been stolen by another client. If global texAge hasn't changed, - * there is no need to walk the list. - * - * These regions can be used as a proxy for the fine-grained texture - * information of other clients - by maintaining them in the same - * lru which is used to age their own textures, clients have an - * approximate lru for the whole of global texture space, and can - * make informed decisions as to which areas to kick out. There is - * no need to choose whether to kick out your own texture or someone - * else's - simply eject them all in LRU order. - */ - /* Last elt is sentinal */ - drmTextureRegion texList[R128_NR_TEX_HEAPS][R128_NR_TEX_REGIONS+1]; - /* last time texture was uploaded */ - unsigned int texAge[R128_NR_TEX_HEAPS]; - - int ctxOwner; /* last context to upload state */ - int pfAllowPageFlip; /* set by the 2d driver, read by the client */ - int pfCurrentPage; /* set by kernel, read by others */ -} R128SAREAPriv, *R128SAREAPrivPtr; - -#endif diff --git a/src/r128_version.h b/src/r128_version.h deleted file mode 100644 index 589d8d40..00000000 --- a/src/r128_version.h +++ /dev/null @@ -1,60 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_version.h,v 1.6 2003/01/01 19:16:35 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _R128_VERSION_H_ -#define _R128_VERSION_H_ 1 - -#undef R128_NAME -#undef R128_DRIVER_NAME -#undef R128_VERSION_MAJOR -#undef R128_VERSION_MINOR -#undef R128_VERSION_PATCH -#undef R128_VERSION_CURRENT -#undef R128_VERSION_EVALUATE -#undef R128_VERSION_STRINGIFY -#undef R128_VERSION_NAME - -#define R128_NAME "R128" -#define R128_DRIVER_NAME "r128" - -#define R128_VERSION_MAJOR 4 -#define R128_VERSION_MINOR 0 -#define R128_VERSION_PATCH 1 - -#ifndef R128_VERSION_EXTRA -#define R128_VERSION_EXTRA "" -#endif - -#define R128_VERSION_CURRENT \ - ((R128_VERSION_MAJOR << 20) | \ - (R128_VERSION_MINOR << 10) | \ - (R128_VERSION_PATCH)) - -#define R128_VERSION_EVALUATE(__x) #__x -#define R128_VERSION_STRINGIFY(_x) R128_VERSION_EVALUATE(_x) -#define R128_VERSION_NAME \ - R128_VERSION_STRINGIFY(R128_VERSION_MAJOR) "." \ - R128_VERSION_STRINGIFY(R128_VERSION_MINOR) "." \ - R128_VERSION_STRINGIFY(R128_VERSION_MINOR) R128_VERSION_EXTRA - -#endif /* _R128_VERSION_H_ */ diff --git a/src/r128_video.c b/src/r128_video.c deleted file mode 100644 index b5a22af0..00000000 --- a/src/r128_video.c +++ /dev/null @@ -1,1021 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_video.c,v 1.28 2003/04/23 21:51:31 tsi Exp $ */ - -#include "r128.h" -#include "r128_reg.h" - -#ifdef XF86DRI -#include "r128_common.h" -#include "r128_sarea.h" -#endif - -#include "xf86.h" -#include "dixstruct.h" - -#include "Xv.h" -#include "fourcc.h" - -#define OFF_DELAY 250 /* milliseconds */ -#define FREE_DELAY 15000 - -#define OFF_TIMER 0x01 -#define FREE_TIMER 0x02 -#define CLIENT_VIDEO_ON 0x04 - -#define TIMER_MASK (OFF_TIMER | FREE_TIMER) - -static XF86VideoAdaptorPtr R128SetupImageVideo(ScreenPtr); -static int R128SetPortAttribute(ScrnInfoPtr, Atom, INT32, pointer); -static int R128GetPortAttribute(ScrnInfoPtr, Atom ,INT32 *, pointer); -static void R128StopVideo(ScrnInfoPtr, pointer, Bool); -static void R128QueryBestSize(ScrnInfoPtr, Bool, short, short, short, short, - unsigned int *, unsigned int *, pointer); -static int R128PutImage(ScrnInfoPtr, short, short, short, short, short, - short, short, short, int, unsigned char*, short, - short, Bool, RegionPtr, pointer); -static int R128QueryImageAttributes(ScrnInfoPtr, int, unsigned short *, - unsigned short *, int *, int *); - - -static void R128ResetVideo(ScrnInfoPtr); - -static void R128VideoTimerCallback(ScrnInfoPtr pScrn, Time now); - - -#define MAKE_ATOM(a) MakeAtom(a, sizeof(a) - 1, TRUE) - -static Atom xvBrightness, xvColorKey, xvSaturation, xvDoubleBuffer; - - -typedef struct { - int brightness; - int saturation; - Bool doubleBuffer; - unsigned char currentBuffer; - FBLinearPtr linear; - RegionRec clip; - CARD32 colorKey; - CARD32 videoStatus; - Time offTime; - Time freeTime; - int ecp_div; -} R128PortPrivRec, *R128PortPrivPtr; - -static void R128ECP(ScrnInfoPtr pScrn, R128PortPrivPtr pPriv) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - int dot_clock = info->ModeReg.dot_clock_freq; - - if (dot_clock < 12500) pPriv->ecp_div = 0; - else if (dot_clock < 25000) pPriv->ecp_div = 1; - else pPriv->ecp_div = 2; - - OUTPLLP(pScrn, R128_VCLK_ECP_CNTL, pPriv->ecp_div<<8, ~R128_ECP_DIV_MASK); -} - -void R128InitVideo(ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - XF86VideoAdaptorPtr *adaptors, *newAdaptors = NULL; - XF86VideoAdaptorPtr newAdaptor = NULL; - int num_adaptors; - - newAdaptor = R128SetupImageVideo(pScreen); - - num_adaptors = xf86XVListGenericAdaptors(pScrn, &adaptors); - - if(newAdaptor) { - if(!num_adaptors) { - num_adaptors = 1; - adaptors = &newAdaptor; - } else { - newAdaptors = /* need to free this someplace */ - xalloc((num_adaptors + 1) * sizeof(XF86VideoAdaptorPtr*)); - if(newAdaptors) { - memcpy(newAdaptors, adaptors, num_adaptors * - sizeof(XF86VideoAdaptorPtr)); - newAdaptors[num_adaptors] = newAdaptor; - adaptors = newAdaptors; - num_adaptors++; - } - } - } - - if(num_adaptors) - xf86XVScreenInit(pScreen, adaptors, num_adaptors); - - if(newAdaptors) - xfree(newAdaptors); -} - -#define MAXWIDTH 2048 -#define MAXHEIGHT 2048 - -/* client libraries expect an encoding */ -static XF86VideoEncodingRec DummyEncoding = -{ - 0, - "XV_IMAGE", - MAXWIDTH, MAXHEIGHT, - {1, 1} -}; - -#define NUM_FORMATS 12 - -static XF86VideoFormatRec Formats[NUM_FORMATS] = -{ - {8, TrueColor}, {8, DirectColor}, {8, PseudoColor}, - {8, GrayScale}, {8, StaticGray}, {8, StaticColor}, - {15, TrueColor}, {16, TrueColor}, {24, TrueColor}, - {15, DirectColor}, {16, DirectColor}, {24, DirectColor} -}; - - -#define NUM_ATTRIBUTES 4 - -static XF86AttributeRec Attributes[NUM_ATTRIBUTES] = -{ - {XvSettable | XvGettable, 0, (1 << 24) - 1, "XV_COLORKEY"}, - {XvSettable | XvGettable, -64, 63, "XV_BRIGHTNESS"}, - {XvSettable | XvGettable, 0, 31, "XV_SATURATION"}, - {XvSettable | XvGettable, 0, 1, "XV_DOUBLE_BUFFER"} -}; - -#define NUM_IMAGES 4 - -static XF86ImageRec Images[NUM_IMAGES] = -{ - XVIMAGE_YUY2, - XVIMAGE_UYVY, - XVIMAGE_YV12, - XVIMAGE_I420 -}; - -static void -R128ResetVideo(ScrnInfoPtr pScrn) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - R128PortPrivPtr pPriv = info->adaptor->pPortPrivates[0].ptr; - - - OUTREG(R128_OV0_SCALE_CNTL, 0x80000000); - OUTREG(R128_OV0_EXCLUSIVE_HORZ, 0); - OUTREG(R128_OV0_AUTO_FLIP_CNTL, 0); /* maybe */ - OUTREG(R128_OV0_FILTER_CNTL, 0x0000000f); - OUTREG(R128_OV0_COLOUR_CNTL, (pPriv->brightness & 0x7f) | - (pPriv->saturation << 8) | - (pPriv->saturation << 16)); - OUTREG(R128_OV0_GRAPHICS_KEY_MSK, (1 << pScrn->depth) - 1); - OUTREG(R128_OV0_GRAPHICS_KEY_CLR, pPriv->colorKey); - OUTREG(R128_OV0_KEY_CNTL, R128_GRAPHIC_KEY_FN_NE); - OUTREG(R128_OV0_TEST, 0); -} - - -static XF86VideoAdaptorPtr -R128AllocAdaptor(ScrnInfoPtr pScrn) -{ - XF86VideoAdaptorPtr adapt; - R128InfoPtr info = R128PTR(pScrn); - R128PortPrivPtr pPriv; - - if(!(adapt = xf86XVAllocateVideoAdaptorRec(pScrn))) - return NULL; - - if(!(pPriv = xcalloc(1, sizeof(R128PortPrivRec) + sizeof(DevUnion)))) - { - xfree(adapt); - return NULL; - } - - adapt->pPortPrivates = (DevUnion*)(&pPriv[1]); - adapt->pPortPrivates[0].ptr = (pointer)pPriv; - - xvBrightness = MAKE_ATOM("XV_BRIGHTNESS"); - xvSaturation = MAKE_ATOM("XV_SATURATION"); - xvColorKey = MAKE_ATOM("XV_COLORKEY"); - xvDoubleBuffer = MAKE_ATOM("XV_DOUBLE_BUFFER"); - - pPriv->colorKey = info->videoKey; - pPriv->doubleBuffer = TRUE; - pPriv->videoStatus = 0; - pPriv->brightness = 0; - pPriv->saturation = 16; - pPriv->currentBuffer = 0; - R128ECP(pScrn, pPriv); - - return adapt; -} - -static XF86VideoAdaptorPtr -R128SetupImageVideo(ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - R128InfoPtr info = R128PTR(pScrn); - R128PortPrivPtr pPriv; - XF86VideoAdaptorPtr adapt; - - if(!(adapt = R128AllocAdaptor(pScrn))) - return NULL; - - adapt->type = XvWindowMask | XvInputMask | XvImageMask; - adapt->flags = VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT; - adapt->name = "ATI Rage128 Video Overlay"; - adapt->nEncodings = 1; - adapt->pEncodings = &DummyEncoding; - adapt->nFormats = NUM_FORMATS; - adapt->pFormats = Formats; - adapt->nPorts = 1; - adapt->nAttributes = NUM_ATTRIBUTES; - adapt->pAttributes = Attributes; - adapt->nImages = NUM_IMAGES; - adapt->pImages = Images; - adapt->PutVideo = NULL; - adapt->PutStill = NULL; - adapt->GetVideo = NULL; - adapt->GetStill = NULL; - adapt->StopVideo = R128StopVideo; - adapt->SetPortAttribute = R128SetPortAttribute; - adapt->GetPortAttribute = R128GetPortAttribute; - adapt->QueryBestSize = R128QueryBestSize; - adapt->PutImage = R128PutImage; - adapt->QueryImageAttributes = R128QueryImageAttributes; - - info->adaptor = adapt; - - pPriv = (R128PortPrivPtr)(adapt->pPortPrivates[0].ptr); - REGION_INIT(pScreen, &(pPriv->clip), NullBox, 0); - - R128ResetVideo(pScrn); - - return adapt; -} - -static void -R128StopVideo(ScrnInfoPtr pScrn, pointer data, Bool cleanup) -{ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - R128PortPrivPtr pPriv = (R128PortPrivPtr)data; - - REGION_EMPTY(pScrn->pScreen, &pPriv->clip); - - if(cleanup) { - if(pPriv->videoStatus & CLIENT_VIDEO_ON) { - OUTREG(R128_OV0_SCALE_CNTL, 0); - } - if(pPriv->linear) { - xf86FreeOffscreenLinear(pPriv->linear); - pPriv->linear = NULL; - } - pPriv->videoStatus = 0; - } else { - if(pPriv->videoStatus & CLIENT_VIDEO_ON) { - pPriv->videoStatus |= OFF_TIMER; - pPriv->offTime = currentTime.milliseconds + OFF_DELAY; - } - } -} - -static int -R128SetPortAttribute( - ScrnInfoPtr pScrn, - Atom attribute, - INT32 value, - pointer data -){ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - R128PortPrivPtr pPriv = (R128PortPrivPtr)data; - - if(attribute == xvBrightness) { - if((value < -64) || (value > 63)) - return BadValue; - pPriv->brightness = value; - - OUTREG(R128_OV0_COLOUR_CNTL, (pPriv->brightness & 0x7f) | - (pPriv->saturation << 8) | - (pPriv->saturation << 16)); - } else - if(attribute == xvSaturation) { - if((value < 0) || (value > 31)) - return BadValue; - pPriv->saturation = value; - - OUTREG(R128_OV0_COLOUR_CNTL, (pPriv->brightness & 0x7f) | - (pPriv->saturation << 8) | - (pPriv->saturation << 16)); - } else - if(attribute == xvDoubleBuffer) { - if((value < 0) || (value > 1)) - return BadValue; - pPriv->doubleBuffer = value; - } else - if(attribute == xvColorKey) { - pPriv->colorKey = value; - OUTREG(R128_OV0_GRAPHICS_KEY_CLR, pPriv->colorKey); - - REGION_EMPTY(pScrn->pScreen, &pPriv->clip); - } else return BadMatch; - - return Success; -} - -static int -R128GetPortAttribute( - ScrnInfoPtr pScrn, - Atom attribute, - INT32 *value, - pointer data -){ - R128PortPrivPtr pPriv = (R128PortPrivPtr)data; - - if(attribute == xvBrightness) { - *value = pPriv->brightness; - } else - if(attribute == xvSaturation) { - *value = pPriv->saturation; - } else - if(attribute == xvDoubleBuffer) { - *value = pPriv->doubleBuffer ? 1 : 0; - } else - if(attribute == xvColorKey) { - *value = pPriv->colorKey; - } else return BadMatch; - - return Success; -} - - -static void -R128QueryBestSize( - ScrnInfoPtr pScrn, - Bool motion, - short vid_w, short vid_h, - short drw_w, short drw_h, - unsigned int *p_w, unsigned int *p_h, - pointer data -){ - if(vid_w > (drw_w << 4)) - drw_w = vid_w >> 4; - if(vid_h > (drw_h << 4)) - drw_h = vid_h >> 4; - - *p_w = drw_w; - *p_h = drw_h; -} - - -/* - * - * R128DMA - abuse the texture blit ioctl to transfer rectangular blocks - * - * The block is split into 'passes' pieces of 'hpass' lines which fit entirely - * into an indirect buffer - * - */ - -static Bool -R128DMA( - R128InfoPtr info, - unsigned char *src, - unsigned char *dst, - int srcPitch, - int dstPitch, - int h, - int w -){ - -#ifdef XF86DRI - -#define BUFSIZE (R128_BUFFER_SIZE - R128_HOSTDATA_BLIT_OFFSET) -#define MAXPASSES (MAXHEIGHT/(BUFSIZE/(MAXWIDTH*2))+1) - - unsigned char *buf; - int err=-1, i, idx, offset, hpass, passes, srcpassbytes, dstpassbytes; - int sizes[MAXPASSES], list[MAXPASSES]; - drmDMAReq req; - drmR128Blit blit; - - /* Verify conditions and bail out as early as possible */ - if (!info->directRenderingEnabled || !info->DMAForXv) - return FALSE; - - if ((hpass = min(h,(BUFSIZE/w))) == 0) - return FALSE; - - if ((passes = (h+hpass-1)/hpass) > MAXPASSES) - return FALSE; - - /* Request indirect buffers */ - srcpassbytes = w*hpass; - - req.context = info->drmCtx; - req.send_count = 0; - req.send_list = NULL; - req.send_sizes = NULL; - req.flags = DRM_DMA_LARGER_OK; - req.request_count = passes; - req.request_size = srcpassbytes + R128_HOSTDATA_BLIT_OFFSET; - req.request_list = &list[0]; - req.request_sizes = &sizes[0]; - req.granted_count = 0; - - if (drmDMA(info->drmFD, &req)) - return FALSE; - - if (req.granted_count < passes) { - drmFreeBufs(info->drmFD, req.granted_count, req.request_list); - return FALSE; - } - - /* Copy parts of the block into buffers and fire them */ - dstpassbytes = hpass*dstPitch; - dstPitch /= 8; - - for (i=0, offset=dst-info->FB; i<passes; i++, offset+=dstpassbytes) { - if (i == (passes-1) && (h % hpass) != 0) { - hpass = h % hpass; - srcpassbytes = w*hpass; - } - - idx = req.request_list[i]; - buf = (unsigned char *) info->buffers->list[idx].address + R128_HOSTDATA_BLIT_OFFSET; - - if (srcPitch == w) { - memcpy(buf, src, srcpassbytes); - src += srcpassbytes; - } else { - int count = hpass; - while(count--) { - memcpy(buf, src, w); - src += srcPitch; - buf += w; - } - } - - blit.idx = idx; - blit.offset = offset; - blit.pitch = dstPitch; - blit.format = (R128_DATATYPE_CI8 >> 16); - blit.x = (offset % 32); - blit.y = 0; - blit.width = w; - blit.height = hpass; - - if ((err = drmCommandWrite(info->drmFD, DRM_R128_BLIT, - &blit, sizeof(drmR128Blit))) < 0) - break; - } - - drmFreeBufs(info->drmFD, req.granted_count, req.request_list); - - return (err==0) ? TRUE : FALSE; - -#else - - /* This is to avoid cluttering the rest of the code with '#ifdef XF86DRI' */ - return FALSE; - -#endif /* XF86DRI */ - -} - - -static void -R128CopyData422( - R128InfoPtr info, - unsigned char *src, - unsigned char *dst, - int srcPitch, - int dstPitch, - int h, - int w -){ - w <<= 1; - - /* Attempt data transfer with DMA and fall back to memcpy */ - - if (!R128DMA(info, src, dst, srcPitch, dstPitch, h, w)) { - while(h--) { - memcpy(dst, src, w); - src += srcPitch; - dst += dstPitch; - } - } -} - -static void -R128CopyData420( - R128InfoPtr info, - unsigned char *src1, - unsigned char *src2, - unsigned char *src3, - unsigned char *dst1, - unsigned char *dst2, - unsigned char *dst3, - int srcPitch, - int srcPitch2, - int dstPitch, - int h, - int w -){ - int count; - - /* Attempt data transfer with DMA and fall back to memcpy */ - - if (!R128DMA(info, src1, dst1, srcPitch, dstPitch, h, w)) { - count = h; - while(count--) { - memcpy(dst1, src1, w); - src1 += srcPitch; - dst1 += dstPitch; - } - } - - w >>= 1; - h >>= 1; - dstPitch >>= 1; - - if (!R128DMA(info, src2, dst2, srcPitch2, dstPitch, h, w)) { - count = h; - while(count--) { - memcpy(dst2, src2, w); - src2 += srcPitch2; - dst2 += dstPitch; - } - } - - if (!R128DMA(info, src3, dst3, srcPitch2, dstPitch, h, w)) { - count = h; - while(count--) { - memcpy(dst3, src3, w); - src3 += srcPitch2; - dst3 += dstPitch; - } - } -} - - -static FBLinearPtr -R128AllocateMemory( - ScrnInfoPtr pScrn, - FBLinearPtr linear, - int size -){ - ScreenPtr pScreen; - FBLinearPtr new_linear; - - if(linear) { - if(linear->size >= size) - return linear; - - if(xf86ResizeOffscreenLinear(linear, size)) - return linear; - - xf86FreeOffscreenLinear(linear); - } - - pScreen = screenInfo.screens[pScrn->scrnIndex]; - - new_linear = xf86AllocateOffscreenLinear(pScreen, size, 16, - NULL, NULL, NULL); - - if(!new_linear) { - int max_size; - - xf86QueryLargestOffscreenLinear(pScreen, &max_size, 16, - PRIORITY_EXTREME); - - if(max_size < size) - return NULL; - - xf86PurgeUnlockedOffscreenAreas(pScreen); - new_linear = xf86AllocateOffscreenLinear(pScreen, size, 16, - NULL, NULL, NULL); - } - - return new_linear; -} - -static void -R128DisplayVideo422( - ScrnInfoPtr pScrn, - int id, - int offset, - short width, short height, - int pitch, - int left, int right, int top, - BoxPtr dstBox, - short src_w, short src_h, - short drw_w, short drw_h -){ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - R128PortPrivPtr pPriv = info->adaptor->pPortPrivates[0].ptr; - int v_inc, h_inc, step_by, tmp; - int p1_h_accum_init, p23_h_accum_init; - int p1_v_accum_init; - - R128ECP(pScrn, pPriv); - - v_inc = (src_h << 20) / drw_h; - h_inc = (src_w << (12 + pPriv->ecp_div)) / drw_w; - step_by = 1; - - while(h_inc >= (2 << 12)) { - step_by++; - h_inc >>= 1; - } - - /* keep everything in 16.16 */ - - offset += ((left >> 16) & ~7) << 1; - - tmp = (left & 0x0003ffff) + 0x00028000 + (h_inc << 3); - p1_h_accum_init = ((tmp << 4) & 0x000f8000) | - ((tmp << 12) & 0xf0000000); - - tmp = ((left >> 1) & 0x0001ffff) + 0x00028000 + (h_inc << 2); - p23_h_accum_init = ((tmp << 4) & 0x000f8000) | - ((tmp << 12) & 0x70000000); - - tmp = (top & 0x0000ffff) + 0x00018000; - p1_v_accum_init = ((tmp << 4) & 0x03ff8000) | 0x00000001; - - left = (left >> 16) & 7; - - OUTREG(R128_OV0_REG_LOAD_CNTL, 1); - while(!(INREG(R128_OV0_REG_LOAD_CNTL) & (1 << 3))); - - OUTREG(R128_OV0_H_INC, h_inc | ((h_inc >> 1) << 16)); - OUTREG(R128_OV0_STEP_BY, step_by | (step_by << 8)); - OUTREG(R128_OV0_Y_X_START, dstBox->x1 | (dstBox->y1 << 16)); - OUTREG(R128_OV0_Y_X_END, dstBox->x2 | (dstBox->y2 << 16)); - OUTREG(R128_OV0_V_INC, v_inc); - OUTREG(R128_OV0_P1_BLANK_LINES_AT_TOP, 0x00000fff | ((src_h - 1) << 16)); - OUTREG(R128_OV0_VID_BUF_PITCH0_VALUE, pitch); - OUTREG(R128_OV0_P1_X_START_END, (width - 1) | (left << 16)); - left >>= 1; width >>= 1; - OUTREG(R128_OV0_P2_X_START_END, (width - 1) | (left << 16)); - OUTREG(R128_OV0_P3_X_START_END, (width - 1) | (left << 16)); - OUTREG(R128_OV0_VID_BUF0_BASE_ADRS, offset & 0xfffffff0); - OUTREG(R128_OV0_P1_V_ACCUM_INIT, p1_v_accum_init); - OUTREG(R128_OV0_P23_V_ACCUM_INIT, 0); - OUTREG(R128_OV0_P1_H_ACCUM_INIT, p1_h_accum_init); - OUTREG(R128_OV0_P23_H_ACCUM_INIT, p23_h_accum_init); - - if(id == FOURCC_UYVY) - OUTREG(R128_OV0_SCALE_CNTL, 0x41FF8C03); - else - OUTREG(R128_OV0_SCALE_CNTL, 0x41FF8B03); - - OUTREG(R128_OV0_REG_LOAD_CNTL, 0); -} - -static void -R128DisplayVideo420( - ScrnInfoPtr pScrn, - short width, short height, - int pitch, - int offset1, int offset2, int offset3, - int left, int right, int top, - BoxPtr dstBox, - short src_w, short src_h, - short drw_w, short drw_h -){ - R128InfoPtr info = R128PTR(pScrn); - unsigned char *R128MMIO = info->MMIO; - R128PortPrivPtr pPriv = info->adaptor->pPortPrivates[0].ptr; - int v_inc, h_inc, step_by, tmp, leftUV; - int p1_h_accum_init, p23_h_accum_init; - int p1_v_accum_init, p23_v_accum_init; - - v_inc = (src_h << 20) / drw_h; - h_inc = (src_w << (12 + pPriv->ecp_div)) / drw_w; - step_by = 1; - - while(h_inc >= (2 << 12)) { - step_by++; - h_inc >>= 1; - } - - /* keep everything in 16.16 */ - - offset1 += (left >> 16) & ~15; - offset2 += (left >> 17) & ~15; - offset3 += (left >> 17) & ~15; - - tmp = (left & 0x0003ffff) + 0x00028000 + (h_inc << 3); - p1_h_accum_init = ((tmp << 4) & 0x000f8000) | - ((tmp << 12) & 0xf0000000); - - tmp = ((left >> 1) & 0x0001ffff) + 0x00028000 + (h_inc << 2); - p23_h_accum_init = ((tmp << 4) & 0x000f8000) | - ((tmp << 12) & 0x70000000); - - tmp = (top & 0x0000ffff) + 0x00018000; - p1_v_accum_init = ((tmp << 4) & 0x03ff8000) | 0x00000001; - - tmp = ((top >> 1) & 0x0000ffff) + 0x00018000; - p23_v_accum_init = ((tmp << 4) & 0x01ff8000) | 0x00000001; - - leftUV = (left >> 17) & 15; - left = (left >> 16) & 15; - - OUTREG(R128_OV0_REG_LOAD_CNTL, 1); - while(!(INREG(R128_OV0_REG_LOAD_CNTL) & (1 << 3))); - - OUTREG(R128_OV0_H_INC, h_inc | ((h_inc >> 1) << 16)); - OUTREG(R128_OV0_STEP_BY, step_by | (step_by << 8)); - OUTREG(R128_OV0_Y_X_START, dstBox->x1 | (dstBox->y1 << 16)); - OUTREG(R128_OV0_Y_X_END, dstBox->x2 | (dstBox->y2 << 16)); - OUTREG(R128_OV0_V_INC, v_inc); - OUTREG(R128_OV0_P1_BLANK_LINES_AT_TOP, 0x00000fff | ((src_h - 1) << 16)); - src_h = (src_h + 1) >> 1; - OUTREG(R128_OV0_P23_BLANK_LINES_AT_TOP, 0x000007ff | ((src_h - 1) << 16)); - OUTREG(R128_OV0_VID_BUF_PITCH0_VALUE, pitch); - OUTREG(R128_OV0_VID_BUF_PITCH1_VALUE, pitch >> 1); - OUTREG(R128_OV0_P1_X_START_END, (width - 1) | (left << 16)); - width >>= 1; - OUTREG(R128_OV0_P2_X_START_END, (width - 1) | (leftUV << 16)); - OUTREG(R128_OV0_P3_X_START_END, (width - 1) | (leftUV << 16)); - OUTREG(R128_OV0_VID_BUF0_BASE_ADRS, offset1 & 0xfffffff0); - OUTREG(R128_OV0_VID_BUF1_BASE_ADRS, (offset2 & 0xfffffff0) | 0x00000001); - OUTREG(R128_OV0_VID_BUF2_BASE_ADRS, (offset3 & 0xfffffff0) | 0x00000001); - OUTREG(R128_OV0_P1_V_ACCUM_INIT, p1_v_accum_init); - OUTREG(R128_OV0_P23_V_ACCUM_INIT, p23_v_accum_init); - OUTREG(R128_OV0_P1_H_ACCUM_INIT, p1_h_accum_init); - OUTREG(R128_OV0_P23_H_ACCUM_INIT, p23_h_accum_init); - OUTREG(R128_OV0_SCALE_CNTL, 0x41FF8A03); - - OUTREG(R128_OV0_REG_LOAD_CNTL, 0); -} - - - -static int -R128PutImage( - ScrnInfoPtr pScrn, - short src_x, short src_y, - short drw_x, short drw_y, - short src_w, short src_h, - short drw_w, short drw_h, - int id, unsigned char* buf, - short width, short height, - Bool Sync, - RegionPtr clipBoxes, pointer data -){ - R128InfoPtr info = R128PTR(pScrn); - R128PortPrivPtr pPriv = (R128PortPrivPtr)data; - INT32 xa, xb, ya, yb; - int pitch, new_size, offset, s1offset, s2offset, s3offset; - int srcPitch, srcPitch2, dstPitch; - int d1line, d2line, d3line, d1offset, d2offset, d3offset; - int top, left, npixels, nlines, bpp; - BoxRec dstBox; - CARD32 tmp; -#if X_BYTE_ORDER == X_BIG_ENDIAN - unsigned char *R128MMIO = info->MMIO; - CARD32 config_cntl = INREG(R128_CONFIG_CNTL); - - /* We need to disable byte swapping, or the data gets mangled */ - OUTREG(R128_CONFIG_CNTL, config_cntl & - ~(APER_0_BIG_ENDIAN_16BPP_SWAP | APER_0_BIG_ENDIAN_32BPP_SWAP)); -#endif - - /* - * s1offset, s2offset, s3offset - byte offsets to the Y, U and V planes - * of the source. - * - * d1offset, d2offset, d3offset - byte offsets to the Y, U and V planes - * of the destination. - * - * offset - byte offset within the framebuffer to where the destination - * is stored. - * - * d1line, d2line, d3line - byte offsets within the destination to the - * first displayed scanline in each plane. - * - */ - - if(src_w > (drw_w << 4)) - drw_w = src_w >> 4; - if(src_h > (drw_h << 4)) - drw_h = src_h >> 4; - - /* Clip */ - xa = src_x; - xb = src_x + src_w; - ya = src_y; - yb = src_y + src_h; - - dstBox.x1 = drw_x; - dstBox.x2 = drw_x + drw_w; - dstBox.y1 = drw_y; - dstBox.y2 = drw_y + drw_h; - - if(!xf86XVClipVideoHelper(&dstBox, &xa, &xb, &ya, &yb, - clipBoxes, width, height)) - return Success; - - dstBox.x1 -= pScrn->frameX0; - dstBox.x2 -= pScrn->frameX0; - dstBox.y1 -= pScrn->frameY0; - dstBox.y2 -= pScrn->frameY0; - - bpp = pScrn->bitsPerPixel >> 3; - pitch = bpp * pScrn->displayWidth; - - switch(id) { - case FOURCC_YV12: - case FOURCC_I420: - srcPitch = (width + 3) & ~3; - srcPitch2 = ((width >> 1) + 3) & ~3; - dstPitch = (width + 31) & ~31; /* of luma */ - new_size = ((dstPitch * (height + (height >> 1))) + bpp - 1) / bpp; - s1offset = 0; - s2offset = srcPitch * height; - s3offset = (srcPitch2 * (height >> 1)) + s2offset; - break; - case FOURCC_UYVY: - case FOURCC_YUY2: - default: - srcPitch = width << 1; - srcPitch2 = 0; - dstPitch = ((width << 1) + 15) & ~15; - new_size = ((dstPitch * height) + bpp - 1) / bpp; - s1offset = 0; - s2offset = 0; - s3offset = 0; - break; - } - - if(!(pPriv->linear = R128AllocateMemory(pScrn, pPriv->linear, - pPriv->doubleBuffer ? (new_size << 1) : new_size))) - { - return BadAlloc; - } - - pPriv->currentBuffer ^= 1; - - /* copy data */ - top = ya >> 16; - left = (xa >> 16) & ~1; - npixels = ((((xb + 0xffff) >> 16) + 1) & ~1) - left; - - offset = pPriv->linear->offset * bpp; - if(pPriv->doubleBuffer) - offset += pPriv->currentBuffer * new_size * bpp; - - switch(id) { - case FOURCC_YV12: - case FOURCC_I420: - d1line = top * dstPitch; - d2line = (height * dstPitch) + ((top >> 1) * (dstPitch >> 1)); - d3line = d2line + ((height >> 1) * (dstPitch >> 1)); - - top &= ~1; - - d1offset = (top * dstPitch) + left + offset; - d2offset = d2line + (left >> 1) + offset; - d3offset = d3line + (left >> 1) + offset; - - s1offset += (top * srcPitch) + left; - tmp = ((top >> 1) * srcPitch2) + (left >> 1); - s2offset += tmp; - s3offset += tmp; - if(id == FOURCC_YV12) { - tmp = s2offset; - s2offset = s3offset; - s3offset = tmp; - } - - nlines = ((((yb + 0xffff) >> 16) + 1) & ~1) - top; - R128CopyData420(info, buf + s1offset, buf + s2offset, buf + s3offset, - info->FB+d1offset, info->FB+d2offset, info->FB+d3offset, - srcPitch, srcPitch2, dstPitch, nlines, npixels); - break; - case FOURCC_UYVY: - case FOURCC_YUY2: - default: - left <<= 1; - d1line = top * dstPitch; - d2line = 0; - d3line = 0; - d1offset = d1line + left + offset; - d2offset = 0; - d3offset = 0; - s1offset += (top * srcPitch) + left; - nlines = ((yb + 0xffff) >> 16) - top; - R128CopyData422(info, buf + s1offset, info->FB + d1offset, - srcPitch, dstPitch, nlines, npixels); - break; - } - -#if X_BYTE_ORDER == X_BIG_ENDIAN - /* restore byte swapping */ - OUTREG(R128_CONFIG_CNTL, config_cntl); -#endif - - /* update cliplist */ - if(!REGION_EQUAL(pScrn->pScreen, &pPriv->clip, clipBoxes)) { - REGION_COPY(pScrn->pScreen, &pPriv->clip, clipBoxes); - /* draw these */ - xf86XVFillKeyHelper(pScrn->pScreen, pPriv->colorKey, clipBoxes); - } - - - switch(id) { - case FOURCC_YV12: - case FOURCC_I420: - R128DisplayVideo420(pScrn, width, height, dstPitch, - offset + d1line, offset + d2line, offset + d3line, - xa, xb, ya, &dstBox, src_w, src_h, drw_w, drw_h); - break; - case FOURCC_UYVY: - case FOURCC_YUY2: - default: - R128DisplayVideo422(pScrn, id, offset + d1line, width, height, dstPitch, - xa, xb, ya, &dstBox, src_w, src_h, drw_w, drw_h); - break; - } - - pPriv->videoStatus = CLIENT_VIDEO_ON; - - info->VideoTimerCallback = R128VideoTimerCallback; - - return Success; -} - - -static int -R128QueryImageAttributes( - ScrnInfoPtr pScrn, - int id, - unsigned short *w, unsigned short *h, - int *pitches, int *offsets -){ - int size, tmp; - - if(*w > MAXWIDTH) *w = MAXWIDTH; - if(*h > MAXHEIGHT) *h = MAXHEIGHT; - - *w = (*w + 1) & ~1; - if(offsets) offsets[0] = 0; - - switch(id) { - case FOURCC_YV12: - case FOURCC_I420: - *h = (*h + 1) & ~1; - size = (*w + 3) & ~3; - if(pitches) pitches[0] = size; - size *= *h; - if(offsets) offsets[1] = size; - tmp = ((*w >> 1) + 3) & ~3; - if(pitches) pitches[1] = pitches[2] = tmp; - tmp *= (*h >> 1); - size += tmp; - if(offsets) offsets[2] = size; - size += tmp; - break; - case FOURCC_UYVY: - case FOURCC_YUY2: - default: - size = *w << 1; - if(pitches) pitches[0] = size; - size *= *h; - break; - } - - return size; -} - -static void -R128VideoTimerCallback(ScrnInfoPtr pScrn, Time now) -{ - R128InfoPtr info = R128PTR(pScrn); - R128PortPrivPtr pPriv = info->adaptor->pPortPrivates[0].ptr; - - if(pPriv->videoStatus & TIMER_MASK) { - if(pPriv->videoStatus & OFF_TIMER) { - if(pPriv->offTime < now) { - unsigned char *R128MMIO = info->MMIO; - OUTREG(R128_OV0_SCALE_CNTL, 0); - pPriv->videoStatus = FREE_TIMER; - pPriv->freeTime = now + FREE_DELAY; - } - } else { /* FREE_TIMER */ - if(pPriv->freeTime < now) { - if(pPriv->linear) { - xf86FreeOffscreenLinear(pPriv->linear); - pPriv->linear = NULL; - } - pPriv->videoStatus = 0; - info->VideoTimerCallback = NULL; - } - } - } else /* shouldn't get here */ - info->VideoTimerCallback = NULL; -} diff --git a/src/radeon.h b/src/radeon.h deleted file mode 100644 index 8b2c8f91..00000000 --- a/src/radeon.h +++ /dev/null @@ -1,805 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon.h,v 1.42 2003/10/07 22:47:12 martin Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * Rickard E. Faith <faith@valinux.com> - * Alan Hourihane <alanh@fairlite.demon.co.uk> - * - */ - -#ifndef _RADEON_H_ -#define _RADEON_H_ - -#include "xf86str.h" - - /* PCI support */ -#include "xf86Pci.h" - - /* XAA and Cursor Support */ -#include "xaa.h" -#include "xf86Cursor.h" - - /* DDC support */ -#include "xf86DDC.h" - - /* Xv support */ -#include "xf86xv.h" - - /* DRI support */ -#ifdef XF86DRI -#define _XF86DRI_SERVER_ -#include "radeon_dripriv.h" -#include "dri.h" -#include "GL/glxint.h" -#endif - - /* Render support */ -#ifdef RENDER -#include "picturestr.h" -#endif - -/* ------- mergedfb support ------------- */ - /* Psuedo Xinerama support */ -#define NEED_REPLIES /* ? */ -#define EXTENSION_PROC_ARGS void * -#include "extnsionst.h" /* required */ -#include "panoramiXproto.h" /* required */ -#define RADEON_XINERAMA_MAJOR_VERSION 1 -#define RADEON_XINERAMA_MINOR_VERSION 1 - - -/* Relative merge position */ -typedef enum { - radeonLeftOf, - radeonRightOf, - radeonAbove, - radeonBelow, - radeonClone -} RADEONScrn2Rel; - -/* ------------------------------------- */ - -#define RADEON_DEBUG 0 /* Turn off debugging output */ -#define RADEON_IDLE_RETRY 16 /* Fall out of idle loops after this count */ -#define RADEON_TIMEOUT 2000000 /* Fall out of wait loops after this count */ -#define RADEON_MMIOSIZE 0x80000 - -#define RADEON_VBIOS_SIZE 0x00010000 -#define RADEON_USE_RMX 0x80000000 /* mode flag for using RMX - * Need to comfirm this is not used - * for something else. - */ - -#if RADEON_DEBUG -#define RADEONTRACE(x) \ -do { \ - ErrorF("(**) %s(%d): ", RADEON_NAME, pScrn->scrnIndex); \ - ErrorF x; \ -} while (0); -#else -#define RADEONTRACE(x) -#endif - - -/* Other macros */ -#define RADEON_ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0])) -#define RADEON_ALIGN(x,bytes) (((x) + ((bytes) - 1)) & ~((bytes) - 1)) -#define RADEONPTR(pScrn) ((RADEONInfoPtr)(pScrn)->driverPrivate) - -typedef struct { - /* Common registers */ - CARD32 ovr_clr; - CARD32 ovr_wid_left_right; - CARD32 ovr_wid_top_bottom; - CARD32 ov0_scale_cntl; - CARD32 mpp_tb_config; - CARD32 mpp_gp_config; - CARD32 subpic_cntl; - CARD32 viph_control; - CARD32 i2c_cntl_1; - CARD32 gen_int_cntl; - CARD32 cap0_trig_cntl; - CARD32 cap1_trig_cntl; - CARD32 bus_cntl; - CARD32 surface_cntl; - CARD32 bios_5_scratch; - /* Other registers to save for VT switches */ - CARD32 dp_datatype; - CARD32 rbbm_soft_reset; - CARD32 clock_cntl_index; - CARD32 amcgpio_en_reg; - CARD32 amcgpio_mask; - - /* CRTC registers */ - CARD32 crtc_gen_cntl; - CARD32 crtc_ext_cntl; - CARD32 dac_cntl; - CARD32 crtc_h_total_disp; - CARD32 crtc_h_sync_strt_wid; - CARD32 crtc_v_total_disp; - CARD32 crtc_v_sync_strt_wid; - CARD32 crtc_offset; - CARD32 crtc_offset_cntl; - CARD32 crtc_pitch; - CARD32 disp_merge_cntl; - CARD32 grph_buffer_cntl; - CARD32 crtc_more_cntl; - - /* CRTC2 registers */ - CARD32 crtc2_gen_cntl; - - CARD32 dac2_cntl; - CARD32 disp_output_cntl; - CARD32 disp_hw_debug; - CARD32 disp2_merge_cntl; - CARD32 grph2_buffer_cntl; - CARD32 crtc2_h_total_disp; - CARD32 crtc2_h_sync_strt_wid; - CARD32 crtc2_v_total_disp; - CARD32 crtc2_v_sync_strt_wid; - CARD32 crtc2_offset; - CARD32 crtc2_offset_cntl; - CARD32 crtc2_pitch; - /* Flat panel registers */ - CARD32 fp_crtc_h_total_disp; - CARD32 fp_crtc_v_total_disp; - CARD32 fp_gen_cntl; - CARD32 fp2_gen_cntl; - CARD32 fp_h_sync_strt_wid; - CARD32 fp2_h_sync_strt_wid; - CARD32 fp_horz_stretch; - CARD32 fp_panel_cntl; - CARD32 fp_v_sync_strt_wid; - CARD32 fp2_v_sync_strt_wid; - CARD32 fp_vert_stretch; - CARD32 lvds_gen_cntl; - CARD32 lvds_pll_cntl; - CARD32 tmds_pll_cntl; - CARD32 tmds_transmitter_cntl; - - /* Computed values for PLL */ - CARD32 dot_clock_freq; - CARD32 pll_output_freq; - int feedback_div; - int post_div; - - /* PLL registers */ - CARD32 ppll_ref_div; - CARD32 ppll_div_3; - CARD32 htotal_cntl; - - /* Computed values for PLL2 */ - CARD32 dot_clock_freq_2; - CARD32 pll_output_freq_2; - int feedback_div_2; - int post_div_2; - - /* PLL2 registers */ - CARD32 p2pll_ref_div; - CARD32 p2pll_div_0; - CARD32 htotal_cntl2; - - /* Pallet */ - Bool palette_valid; - CARD32 palette[256]; - CARD32 palette2[256]; -} RADEONSaveRec, *RADEONSavePtr; - -typedef struct { - CARD16 reference_freq; - CARD16 reference_div; - CARD32 min_pll_freq; - CARD32 max_pll_freq; - CARD16 xclk; -} RADEONPLLRec, *RADEONPLLPtr; - -typedef struct { - int bitsPerPixel; - int depth; - int displayWidth; - int pixel_code; - int pixel_bytes; - DisplayModePtr mode; -} RADEONFBLayout; - -typedef enum { - MT_NONE, - MT_CRT, - MT_LCD, - MT_DFP, - MT_CTV, - MT_STV -} RADEONMonitorType; - -typedef enum { - DDC_NONE_DETECTED, - DDC_MONID, - DDC_DVI, - DDC_VGA, - DDC_CRT2 -} RADEONDDCType; - -typedef enum { - CONNECTOR_NONE, - CONNECTOR_PROPRIETARY, - CONNECTOR_CRT, - CONNECTOR_DVI_I, - CONNECTOR_DVI_D -} RADEONConnectorType; - -typedef enum { - CHIP_FAMILY_UNKNOW, - CHIP_FAMILY_LEGACY, - CHIP_FAMILY_RADEON, - CHIP_FAMILY_RV100, - CHIP_FAMILY_RS100, /* U1 (IGP320M) or A3 (IGP320)*/ - CHIP_FAMILY_RV200, - CHIP_FAMILY_RS200, /* U2 (IGP330M/340M/350M) or A4 (IGP330/340/345/350), RS250 (IGP 7000) */ - CHIP_FAMILY_R200, - CHIP_FAMILY_RV250, - CHIP_FAMILY_RS300, /* Radeon 9000 IGP */ - CHIP_FAMILY_RV280, - CHIP_FAMILY_R300, - CHIP_FAMILY_R350, - CHIP_FAMILY_RV350, - CHIP_FAMILY_LAST -} RADEONChipFamily; - -typedef struct { - CARD32 freq; - CARD32 value; -}RADEONTMDSPll; - -typedef struct { - EntityInfoPtr pEnt; - pciVideoPtr PciInfo; - PCITAG PciTag; - int Chipset; - RADEONChipFamily ChipFamily; - - Bool FBDev; - - unsigned long LinearAddr; /* Frame buffer physical address */ - unsigned long MMIOAddr; /* MMIO region physical address */ - unsigned long BIOSAddr; /* BIOS physical address */ - - unsigned char *MMIO; /* Map of MMIO region */ - unsigned char *FB; /* Map of frame buffer */ - CARD8 *VBIOS; /* Video BIOS pointer */ - - CARD32 MemCntl; - CARD32 BusCntl; - unsigned long FbMapSize; /* Size of frame buffer, in bytes */ - int Flags; /* Saved copy of mode flags */ - - /* VE/M6 support */ - RADEONMonitorType DisplayType; /* Monitor connected on */ - RADEONDDCType DDCType; - RADEONConnectorType ConnectorType; - Bool HasCRTC2; /* All cards except original Radeon */ - Bool IsMobility; /* Mobile chips for laptops */ - Bool IsIGP; /* IGP chips */ - Bool IsSecondary; /* Second Screen */ - Bool IsSwitching; /* Flag for switching mode */ - Bool OverlayOnCRTC2; - Bool PanelOff; /* Force panel (LCD/DFP) off */ - int FPBIOSstart; /* Start of the flat panel info */ - Bool ddc_mode; /* Validate mode by matching exactly - * the modes supported in DDC data - */ - Bool R300CGWorkaround; - - /* EDID or BIOS values for FPs */ - int PanelXRes; - int PanelYRes; - int HOverPlus; - int HSyncWidth; - int HBlank; - int VOverPlus; - int VSyncWidth; - int VBlank; - int PanelPwrDly; - int DotClock; - int RefDivider; - int FeedbackDivider; - int PostDivider; - Bool UseBiosDividers; - /* EDID data using DDC interface */ - Bool ddc_bios; - Bool ddc1; - Bool ddc2; - I2CBusPtr pI2CBus; - CARD32 DDCReg; - - RADEONPLLRec pll; - RADEONTMDSPll tmds_pll[4]; - int RamWidth; - float sclk; /* in MHz */ - float mclk; /* in MHz */ - Bool IsDDR; - int DispPriority; - - RADEONSaveRec SavedReg; /* Original (text) mode */ - RADEONSaveRec ModeReg; /* Current mode */ - Bool (*CloseScreen)(int, ScreenPtr); - - void (*BlockHandler)(int, pointer, pointer, pointer); - - Bool PaletteSavedOnVT; /* Palette saved on last VT switch */ - - XAAInfoRecPtr accel; - Bool accelOn; - xf86CursorInfoPtr cursor; - unsigned long cursor_start; - unsigned long cursor_end; -#ifdef ARGB_CURSOR - Bool cursor_argb; -#endif - int cursor_fg; - int cursor_bg; - - /* - * XAAForceTransBlit is used to change the behavior of the XAA - * SetupForScreenToScreenCopy function, to make it DGA-friendly. - */ - Bool XAAForceTransBlit; - - int fifo_slots; /* Free slots in the FIFO (64 max) */ - int pix24bpp; /* Depth of pixmap for 24bpp fb */ - Bool dac6bits; /* Use 6 bit DAC? */ - - /* Computed values for Radeon */ - int pitch; - int datatype; - CARD32 dp_gui_master_cntl; - CARD32 dp_gui_master_cntl_clip; - CARD32 trans_color; - - /* Saved values for ScreenToScreenCopy */ - int xdir; - int ydir; - - /* ScanlineScreenToScreenColorExpand support */ - unsigned char *scratch_buffer[1]; - unsigned char *scratch_save; - int scanline_x; - int scanline_y; - int scanline_w; - int scanline_h; - int scanline_h_w; - int scanline_words; - int scanline_direct; - int scanline_bpp; /* Only used for ImageWrite */ - int scanline_fg; - int scanline_bg; - int scanline_hpass; - int scanline_x1clip; - int scanline_x2clip; - - /* Saved values for DashedTwoPointLine */ - int dashLen; - CARD32 dashPattern; - int dash_fg; - int dash_bg; - - DGAModePtr DGAModes; - int numDGAModes; - Bool DGAactive; - int DGAViewportStatus; - DGAFunctionRec DGAFuncs; - - RADEONFBLayout CurrentLayout; -#ifdef XF86DRI - Bool noBackBuffer; - Bool directRenderingEnabled; - DRIInfoPtr pDRIInfo; - int drmFD; - int numVisualConfigs; - __GLXvisualConfig *pVisualConfigs; - RADEONConfigPrivPtr pVisualConfigsPriv; - - drm_handle_t fbHandle; - - drmSize registerSize; - drm_handle_t registerHandle; - - Bool IsPCI; /* Current card is a PCI card */ - drmSize pciSize; - drm_handle_t pciMemHandle; - unsigned char *PCI; /* Map */ - - Bool depthMoves; /* Enable depth moves -- slow! */ - Bool allowPageFlip; /* Enable 3d page flipping */ - Bool have3DWindows; /* Are there any 3d clients? */ - int drmMinor; - - drmSize gartSize; - drm_handle_t agpMemHandle; /* Handle from drmAgpAlloc */ - unsigned long gartOffset; - unsigned char *AGP; /* Map */ - int agpMode; - int agpFastWrite; - - CARD32 pciCommand; - - Bool CPRuns; /* CP is running */ - Bool CPInUse; /* CP has been used by X server */ - Bool CPStarted; /* CP has started */ - int CPMode; /* CP mode that server/clients use */ - int CPFifoSize; /* Size of the CP command FIFO */ - int CPusecTimeout; /* CP timeout in usecs */ - - /* CP ring buffer data */ - unsigned long ringStart; /* Offset into GART space */ - drm_handle_t ringHandle; /* Handle from drmAddMap */ - drmSize ringMapSize; /* Size of map */ - int ringSize; /* Size of ring (in MB) */ - unsigned char *ring; /* Map */ - int ringSizeLog2QW; - - unsigned long ringReadOffset; /* Offset into GART space */ - drm_handle_t ringReadPtrHandle; /* Handle from drmAddMap */ - drmSize ringReadMapSize; /* Size of map */ - unsigned char *ringReadPtr; /* Map */ - - /* CP vertex/indirect buffer data */ - unsigned long bufStart; /* Offset into GART space */ - drm_handle_t bufHandle; /* Handle from drmAddMap */ - drmSize bufMapSize; /* Size of map */ - int bufSize; /* Size of buffers (in MB) */ - unsigned char *buf; /* Map */ - int bufNumBufs; /* Number of buffers */ - drmBufMapPtr buffers; /* Buffer map */ - - /* CP GART Texture data */ - unsigned long gartTexStart; /* Offset into GART space */ - drm_handle_t gartTexHandle; /* Handle from drmAddMap */ - drmSize gartTexMapSize; /* Size of map */ - int gartTexSize; /* Size of GART tex space (in MB) */ - unsigned char *gartTex; /* Map */ - int log2GARTTexGran; - - /* CP accleration */ - drmBufPtr indirectBuffer; - int indirectStart; - - /* DRI screen private data */ - int fbX; - int fbY; - int backX; - int backY; - int depthX; - int depthY; - - unsigned int fbLocation; - int frontOffset; - int frontPitch; - int backOffset; - int backPitch; - int depthOffset; - int depthPitch; - int textureOffset; - int textureSize; - int log2TexGran; - - CARD32 frontPitchOffset; - CARD32 backPitchOffset; - CARD32 depthPitchOffset; - - CARD32 dst_pitch_offset; - - /* offscreen memory management */ - int backLines; - FBAreaPtr backArea; - int depthTexLines; - FBAreaPtr depthTexArea; - - /* Saved scissor values */ - CARD32 sc_left; - CARD32 sc_right; - CARD32 sc_top; - CARD32 sc_bottom; - - CARD32 re_top_left; - CARD32 re_width_height; - - CARD32 aux_sc_cntl; - - int irq; - -#ifdef PER_CONTEXT_SAREA - int perctx_sarea_size; -#endif -#endif - - /* XVideo */ - XF86VideoAdaptorPtr adaptor; - void (*VideoTimerCallback)(ScrnInfoPtr, Time); - FBLinearPtr videoLinear; - int videoKey; - - /* general */ - Bool showCache; - OptionInfoPtr Options; -#ifdef XFree86LOADER - XF86ModReqInfo xaaReq; -#endif - - /* merged fb stuff, also covers clone modes */ - Bool MergedFB; - RADEONScrn2Rel CRT2Position; - char * CRT2HSync; - char * CRT2VRefresh; - char * MetaModes; - ScrnInfoPtr CRT2pScrn; - DisplayModePtr CRT1Modes; - DisplayModePtr CRT1CurrentMode; - int CRT1frameX0; - int CRT1frameY0; - int CRT1frameX1; - int CRT1frameY1; - RADEONMonitorType MergeType; - RADEONDDCType MergeDDCType; - void (*PointerMoved)(int index, int x, int y); - /* pseudo xinerama support for mergedfb */ - int maxCRT1_X1, maxCRT1_X2, maxCRT1_Y1, maxCRT1_Y2; - int maxCRT2_X1, maxCRT2_X2, maxCRT2_Y1, maxCRT2_Y2; - int maxClone_X1, maxClone_X2, maxClone_Y1, maxClone_Y2; - Bool UseRADEONXinerama; - Bool CRT2IsScrn0; - ExtensionEntry *XineramaExtEntry; - int RADEONXineramaVX, RADEONXineramaVY; - Bool AtLeastOneNonClone; - int MergedFBXDPI, MergedFBYDPI; - Bool NoVirtual; - -} RADEONInfoRec, *RADEONInfoPtr; - - -#define RADEONWaitForFifo(pScrn, entries) \ -do { \ - if (info->fifo_slots < entries) \ - RADEONWaitForFifoFunction(pScrn, entries); \ - info->fifo_slots -= entries; \ -} while (0) - -extern void RADEONWaitForFifoFunction(ScrnInfoPtr pScrn, int entries); -extern void RADEONWaitForIdleMMIO(ScrnInfoPtr pScrn); -#ifdef XF86DRI -extern void RADEONWaitForIdleCP(ScrnInfoPtr pScrn); -#endif - -extern void RADEONDoAdjustFrame(ScrnInfoPtr pScrn, int x, int y, - int clone); - -extern void RADEONEngineReset(ScrnInfoPtr pScrn); -extern void RADEONEngineFlush(ScrnInfoPtr pScrn); -extern void RADEONEngineRestore(ScrnInfoPtr pScrn); - -extern unsigned RADEONINPLL(ScrnInfoPtr pScrn, int addr); -extern void RADEONWaitForVerticalSync(ScrnInfoPtr pScrn); -extern void RADEONWaitForVerticalSync2(ScrnInfoPtr pScrn); - -extern void RADEONSelectBuffer(ScrnInfoPtr pScrn, int buffer); - -extern Bool RADEONAccelInit(ScreenPtr pScreen); -extern void RADEONAccelInitMMIO(ScreenPtr pScreen, XAAInfoRecPtr a); -extern void RADEONEngineInit(ScrnInfoPtr pScrn); -extern Bool RADEONCursorInit(ScreenPtr pScreen); -extern Bool RADEONDGAInit(ScreenPtr pScreen); - -extern int RADEONMinBits(int val); - -extern void RADEONInitVideo(ScreenPtr pScreen); -extern void RADEONResetVideo(ScrnInfoPtr pScrn); -extern void R300CGWorkaround(ScrnInfoPtr pScrn); - -#ifdef XF86DRI -extern void RADEONAccelInitCP(ScreenPtr pScreen, XAAInfoRecPtr a); -extern Bool RADEONDRIScreenInit(ScreenPtr pScreen); -extern void RADEONDRICloseScreen(ScreenPtr pScreen); -extern void RADEONDRIResume(ScreenPtr pScreen); -extern Bool RADEONDRIFinishScreenInit(ScreenPtr pScreen); - -extern drmBufPtr RADEONCPGetBuffer(ScrnInfoPtr pScrn); -extern void RADEONCPFlushIndirect(ScrnInfoPtr pScrn, int discard); -extern void RADEONCPReleaseIndirect(ScrnInfoPtr pScrn); -extern int RADEONCPStop(ScrnInfoPtr pScrn, RADEONInfoPtr info); - - -#define RADEONCP_START(pScrn, info) \ -do { \ - int _ret = drmCommandNone(info->drmFD, DRM_RADEON_CP_START); \ - if (_ret) { \ - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, \ - "%s: CP start %d\n", __FUNCTION__, _ret); \ - } \ - info->CPStarted = TRUE; \ -} while (0) - -#define RADEONCP_STOP(pScrn, info) \ -do { \ - int _ret; \ - if (info->CPStarted) { \ - _ret = RADEONCPStop(pScrn, info); \ - if (_ret) { \ - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, \ - "%s: CP stop %d\n", __FUNCTION__, _ret); \ - } \ - info->CPStarted = FALSE; \ - } \ - RADEONEngineRestore(pScrn); \ - info->CPRuns = FALSE; \ -} while (0) - -#define RADEONCP_RESET(pScrn, info) \ -do { \ - if (RADEONCP_USE_RING_BUFFER(info->CPMode)) { \ - int _ret = drmCommandNone(info->drmFD, DRM_RADEON_CP_RESET); \ - if (_ret) { \ - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, \ - "%s: CP reset %d\n", __FUNCTION__, _ret); \ - } \ - } \ -} while (0) - -#define RADEONCP_REFRESH(pScrn, info) \ -do { \ - if (!info->CPInUse) { \ - RADEON_WAIT_UNTIL_IDLE(); \ - BEGIN_RING(6); \ - OUT_RING_REG(RADEON_RE_TOP_LEFT, info->re_top_left); \ - OUT_RING_REG(RADEON_RE_WIDTH_HEIGHT, info->re_width_height); \ - OUT_RING_REG(RADEON_AUX_SC_CNTL, info->aux_sc_cntl); \ - ADVANCE_RING(); \ - info->CPInUse = TRUE; \ - } \ -} while (0) - - -#define CP_PACKET0(reg, n) \ - (RADEON_CP_PACKET0 | ((n) << 16) | ((reg) >> 2)) -#define CP_PACKET1(reg0, reg1) \ - (RADEON_CP_PACKET1 | (((reg1) >> 2) << 11) | ((reg0) >> 2)) -#define CP_PACKET2() \ - (RADEON_CP_PACKET2) -#define CP_PACKET3(pkt, n) \ - (RADEON_CP_PACKET3 | (pkt) | ((n) << 16)) - - -#define RADEON_VERBOSE 0 - -#define RING_LOCALS CARD32 *__head = NULL; int __count = 0 - -#define BEGIN_RING(n) do { \ - if (RADEON_VERBOSE) { \ - xf86DrvMsg(pScrn->scrnIndex, X_INFO, \ - "BEGIN_RING(%d) in %s\n", n, __FUNCTION__); \ - } \ - if (!info->indirectBuffer) { \ - info->indirectBuffer = RADEONCPGetBuffer(pScrn); \ - info->indirectStart = 0; \ - } else if (info->indirectBuffer->used + (n) * (int)sizeof(CARD32) > \ - info->indirectBuffer->total) { \ - RADEONCPFlushIndirect(pScrn, 1); \ - } \ - __head = (pointer)((char *)info->indirectBuffer->address + \ - info->indirectBuffer->used); \ - __count = 0; \ -} while (0) - -#define ADVANCE_RING() do { \ - if (RADEON_VERBOSE) { \ - xf86DrvMsg(pScrn->scrnIndex, X_INFO, \ - "ADVANCE_RING() start: %d used: %d count: %d\n", \ - info->indirectStart, \ - info->indirectBuffer->used, \ - __count * sizeof(CARD32)); \ - } \ - info->indirectBuffer->used += __count * (int)sizeof(CARD32); \ -} while (0) - -#define OUT_RING(x) do { \ - if (RADEON_VERBOSE) { \ - xf86DrvMsg(pScrn->scrnIndex, X_INFO, \ - " OUT_RING(0x%08x)\n", (unsigned int)(x)); \ - } \ - __head[__count++] = (x); \ -} while (0) - -#define OUT_RING_REG(reg, val) \ -do { \ - OUT_RING(CP_PACKET0(reg, 0)); \ - OUT_RING(val); \ -} while (0) - -#define FLUSH_RING() \ -do { \ - if (RADEON_VERBOSE) \ - xf86DrvMsg(pScrn->scrnIndex, X_INFO, \ - "FLUSH_RING in %s\n", __FUNCTION__); \ - if (info->indirectBuffer) { \ - RADEONCPFlushIndirect(pScrn, 0); \ - } \ -} while (0) - - -#define RADEON_WAIT_UNTIL_2D_IDLE() \ -do { \ - BEGIN_RING(2); \ - OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0)); \ - OUT_RING((RADEON_WAIT_2D_IDLECLEAN | \ - RADEON_WAIT_HOST_IDLECLEAN)); \ - ADVANCE_RING(); \ -} while (0) - -#define RADEON_WAIT_UNTIL_3D_IDLE() \ -do { \ - BEGIN_RING(2); \ - OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0)); \ - OUT_RING((RADEON_WAIT_3D_IDLECLEAN | \ - RADEON_WAIT_HOST_IDLECLEAN)); \ - ADVANCE_RING(); \ -} while (0) - -#define RADEON_WAIT_UNTIL_IDLE() \ -do { \ - if (RADEON_VERBOSE) { \ - xf86DrvMsg(pScrn->scrnIndex, X_INFO, \ - "WAIT_UNTIL_IDLE() in %s\n", __FUNCTION__); \ - } \ - BEGIN_RING(2); \ - OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0)); \ - OUT_RING((RADEON_WAIT_2D_IDLECLEAN | \ - RADEON_WAIT_3D_IDLECLEAN | \ - RADEON_WAIT_HOST_IDLECLEAN)); \ - ADVANCE_RING(); \ -} while (0) - -#define RADEON_FLUSH_CACHE() \ -do { \ - BEGIN_RING(2); \ - OUT_RING(CP_PACKET0(RADEON_RB2D_DSTCACHE_CTLSTAT, 0)); \ - OUT_RING(RADEON_RB2D_DC_FLUSH); \ - ADVANCE_RING(); \ -} while (0) - -#define RADEON_PURGE_CACHE() \ -do { \ - BEGIN_RING(2); \ - OUT_RING(CP_PACKET0(RADEON_RB2D_DSTCACHE_CTLSTAT, 0)); \ - OUT_RING(RADEON_RB2D_DC_FLUSH_ALL); \ - ADVANCE_RING(); \ -} while (0) - -#endif /* XF86DRI */ - -#endif /* _RADEON_H_ */ diff --git a/src/radeon_accel.c b/src/radeon_accel.c deleted file mode 100644 index 0fabcbee..00000000 --- a/src/radeon_accel.c +++ /dev/null @@ -1,605 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c,v 1.34 2003/07/02 17:31:29 martin Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * Rickard E. Faith <faith@valinux.com> - * Alan Hourihane <alanh@fairlite.demon.co.uk> - * - * Credits: - * - * Thanks to Ani Joshi <ajoshi@shell.unixbox.com> for providing source - * code to his Radeon driver. Portions of this file are based on the - * initialization code for that driver. - * - * References: - * - * !!!! FIXME !!!! - * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical - * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April - * 1999. - * - * RAGE 128 Software Development Manual (Technical Reference Manual P/N - * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. - * - * Notes on unimplemented XAA optimizations: - * - * SetClipping: This has been removed as XAA expects 16bit registers - * for full clipping. - * TwoPointLine: The Radeon supports this. Not Bresenham. - * DashedLine with non-power-of-two pattern length: Apparently, there is - * no way to set the length of the pattern -- it is always - * assumed to be 8 or 32 (or 1024?). - * ScreenToScreenColorExpandFill: See p. 4-17 of the Technical Reference - * Manual where it states that monochrome expansion of frame - * buffer data is not supported. - * CPUToScreenColorExpandFill, direct: The implementation here uses a hybrid - * direct/indirect method. If we had more data registers, - * then we could do better. If XAA supported a trigger write - * address, the code would be simpler. - * Color8x8PatternFill: Apparently, an 8x8 color brush cannot take an 8x8 - * pattern from frame buffer memory. - * ImageWrites: Same as CPUToScreenColorExpandFill - * - */ - - /* Driver data structures */ -#include "radeon.h" -#include "radeon_macros.h" -#include "radeon_probe.h" -#include "radeon_reg.h" -#include "radeon_version.h" -#ifdef XF86DRI -#define _XF86DRI_SERVER_ -#include "radeon_dri.h" -#include "radeon_common.h" -#include "radeon_sarea.h" -#endif - - /* Line support */ -#include "miline.h" - - /* X and server generic header files */ -#include "xf86.h" - -static struct { - int rop; - int pattern; -} RADEON_ROP[] = { - { RADEON_ROP3_ZERO, RADEON_ROP3_ZERO }, /* GXclear */ - { RADEON_ROP3_DSa, RADEON_ROP3_DPa }, /* Gxand */ - { RADEON_ROP3_SDna, RADEON_ROP3_PDna }, /* GXandReverse */ - { RADEON_ROP3_S, RADEON_ROP3_P }, /* GXcopy */ - { RADEON_ROP3_DSna, RADEON_ROP3_DPna }, /* GXandInverted */ - { RADEON_ROP3_D, RADEON_ROP3_D }, /* GXnoop */ - { RADEON_ROP3_DSx, RADEON_ROP3_DPx }, /* GXxor */ - { RADEON_ROP3_DSo, RADEON_ROP3_DPo }, /* GXor */ - { RADEON_ROP3_DSon, RADEON_ROP3_DPon }, /* GXnor */ - { RADEON_ROP3_DSxn, RADEON_ROP3_PDxn }, /* GXequiv */ - { RADEON_ROP3_Dn, RADEON_ROP3_Dn }, /* GXinvert */ - { RADEON_ROP3_SDno, RADEON_ROP3_PDno }, /* GXorReverse */ - { RADEON_ROP3_Sn, RADEON_ROP3_Pn }, /* GXcopyInverted */ - { RADEON_ROP3_DSno, RADEON_ROP3_DPno }, /* GXorInverted */ - { RADEON_ROP3_DSan, RADEON_ROP3_DPan }, /* GXnand */ - { RADEON_ROP3_ONE, RADEON_ROP3_ONE } /* GXset */ -}; - -extern int gRADEONEntityIndex; - -/* The FIFO has 64 slots. This routines waits until at least `entries' - * of these slots are empty. - */ -void RADEONWaitForFifoFunction(ScrnInfoPtr pScrn, int entries) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - int i; - - for (;;) { - for (i = 0; i < RADEON_TIMEOUT; i++) { - info->fifo_slots = - INREG(RADEON_RBBM_STATUS) & RADEON_RBBM_FIFOCNT_MASK; - if (info->fifo_slots >= entries) return; - } - RADEONTRACE(("FIFO timed out: %d entries, stat=0x%08x\n", - INREG(RADEON_RBBM_STATUS) & RADEON_RBBM_FIFOCNT_MASK, - INREG(RADEON_RBBM_STATUS))); - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "FIFO timed out, resetting engine...\n"); - RADEONEngineReset(pScrn); - RADEONEngineRestore(pScrn); -#ifdef XF86DRI - if (info->directRenderingEnabled) { - RADEONCP_RESET(pScrn, info); - RADEONCP_START(pScrn, info); - } -#endif - } -} - -/* Flush all dirty data in the Pixel Cache to memory */ -void RADEONEngineFlush(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - int i; - - OUTREGP(RADEON_RB2D_DSTCACHE_CTLSTAT, - RADEON_RB2D_DC_FLUSH_ALL, - ~RADEON_RB2D_DC_FLUSH_ALL); - for (i = 0; i < RADEON_TIMEOUT; i++) { - if (!(INREG(RADEON_RB2D_DSTCACHE_CTLSTAT) & RADEON_RB2D_DC_BUSY)) - break; - } -} - -/* Reset graphics card to known state */ -void RADEONEngineReset(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - CARD32 clock_cntl_index; - CARD32 mclk_cntl; - CARD32 rbbm_soft_reset; - CARD32 host_path_cntl; - - RADEONEngineFlush(pScrn); - - clock_cntl_index = INREG(RADEON_CLOCK_CNTL_INDEX); - if (info->R300CGWorkaround) R300CGWorkaround(pScrn); - - /* Some ASICs have bugs with dynamic-on feature, which are - * ASIC-version dependent, so we force all blocks on for now - */ - if (info->HasCRTC2) { - CARD32 tmp; - - tmp = INPLL(pScrn, RADEON_SCLK_CNTL); - OUTPLL(RADEON_SCLK_CNTL, ((tmp & ~RADEON_DYN_STOP_LAT_MASK) | - RADEON_CP_MAX_DYN_STOP_LAT | - RADEON_SCLK_FORCEON_MASK)); - - if (info->ChipFamily == CHIP_FAMILY_RV200) { - tmp = INPLL(pScrn, RADEON_SCLK_MORE_CNTL); - OUTPLL(RADEON_SCLK_MORE_CNTL, tmp | RADEON_SCLK_MORE_FORCEON); - } - } - - mclk_cntl = INPLL(pScrn, RADEON_MCLK_CNTL); - OUTPLL(RADEON_MCLK_CNTL, (mclk_cntl | - RADEON_FORCEON_MCLKA | - RADEON_FORCEON_MCLKB | - RADEON_FORCEON_YCLKA | - RADEON_FORCEON_YCLKB | - RADEON_FORCEON_MC | - RADEON_FORCEON_AIC)); - - /* Soft resetting HDP thru RBBM_SOFT_RESET register can cause some - * unexpected behaviour on some machines. Here we use - * RADEON_HOST_PATH_CNTL to reset it. - */ - host_path_cntl = INREG(RADEON_HOST_PATH_CNTL); - rbbm_soft_reset = INREG(RADEON_RBBM_SOFT_RESET); - - if ((info->ChipFamily == CHIP_FAMILY_R300) || - (info->ChipFamily == CHIP_FAMILY_R350) || - (info->ChipFamily == CHIP_FAMILY_RV350)) { - CARD32 tmp; - - OUTREG(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | - RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_E2)); - INREG(RADEON_RBBM_SOFT_RESET); - OUTREG(RADEON_RBBM_SOFT_RESET, 0); - tmp = INREG(RADEON_RB2D_DSTCACHE_MODE); - OUTREG(RADEON_RB2D_DSTCACHE_MODE, tmp | (1 << 17)); /* FIXME */ - } else { - OUTREG(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | - RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_SE | - RADEON_SOFT_RESET_RE | - RADEON_SOFT_RESET_PP | - RADEON_SOFT_RESET_E2 | - RADEON_SOFT_RESET_RB)); - INREG(RADEON_RBBM_SOFT_RESET); - OUTREG(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset & (CARD32) - ~(RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_SE | - RADEON_SOFT_RESET_RE | - RADEON_SOFT_RESET_PP | - RADEON_SOFT_RESET_E2 | - RADEON_SOFT_RESET_RB))); - INREG(RADEON_RBBM_SOFT_RESET); - } - - OUTREG(RADEON_HOST_PATH_CNTL, host_path_cntl | RADEON_HDP_SOFT_RESET); - INREG(RADEON_HOST_PATH_CNTL); - OUTREG(RADEON_HOST_PATH_CNTL, host_path_cntl); - - if ((info->ChipFamily != CHIP_FAMILY_R300) && - (info->ChipFamily != CHIP_FAMILY_R350) && - (info->ChipFamily != CHIP_FAMILY_RV350)) - OUTREG(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset); - - OUTREG(RADEON_CLOCK_CNTL_INDEX, clock_cntl_index); - OUTPLL(RADEON_MCLK_CNTL, mclk_cntl); - if (info->R300CGWorkaround) R300CGWorkaround(pScrn); -} - -/* Restore the acceleration hardware to its previous state */ -void RADEONEngineRestore(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - int pitch64; - - RADEONTRACE(("EngineRestore (%d/%d)\n", - info->CurrentLayout.pixel_code, - info->CurrentLayout.bitsPerPixel)); - - RADEONWaitForFifo(pScrn, 1); - - /* NOTE: The following RB2D_DSTCACHE_MODE setting will cause the - * R300 to hang. ATI does not see a reason to change it from the - * default BIOS settings (even on non-R300 cards). This setting - * might be removed in future versions of the Radeon driver. - */ - - /* Turn of all automatic flushing - we'll do it all */ - if ((info->ChipFamily != CHIP_FAMILY_R300) && - (info->ChipFamily != CHIP_FAMILY_R350) && - (info->ChipFamily != CHIP_FAMILY_RV350)) - OUTREG(RADEON_RB2D_DSTCACHE_MODE, 0); - - pitch64 = ((pScrn->displayWidth * (pScrn->bitsPerPixel / 8) + 0x3f)) >> 6; - - RADEONWaitForFifo(pScrn, 1); - OUTREG(RADEON_DEFAULT_OFFSET, ((info->fbLocation >> 10) - | (pitch64 << 22))); - - RADEONWaitForFifo(pScrn, 1); -#if X_BYTE_ORDER == X_BIG_ENDIAN - OUTREGP(RADEON_DP_DATATYPE, - RADEON_HOST_BIG_ENDIAN_EN, - ~RADEON_HOST_BIG_ENDIAN_EN); -#else - OUTREGP(RADEON_DP_DATATYPE, 0, ~RADEON_HOST_BIG_ENDIAN_EN); -#endif - - /* Restore SURFACE_CNTL */ - OUTREG(RADEON_SURFACE_CNTL, info->ModeReg.surface_cntl); - - RADEONWaitForFifo(pScrn, 1); - OUTREG(RADEON_DEFAULT_SC_BOTTOM_RIGHT, (RADEON_DEFAULT_SC_RIGHT_MAX - | RADEON_DEFAULT_SC_BOTTOM_MAX)); - RADEONWaitForFifo(pScrn, 1); - OUTREG(RADEON_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl - | RADEON_GMC_BRUSH_SOLID_COLOR - | RADEON_GMC_SRC_DATATYPE_COLOR)); - - RADEONWaitForFifo(pScrn, 7); - OUTREG(RADEON_DST_LINE_START, 0); - OUTREG(RADEON_DST_LINE_END, 0); - OUTREG(RADEON_DP_BRUSH_FRGD_CLR, 0xffffffff); - OUTREG(RADEON_DP_BRUSH_BKGD_CLR, 0x00000000); - OUTREG(RADEON_DP_SRC_FRGD_CLR, 0xffffffff); - OUTREG(RADEON_DP_SRC_BKGD_CLR, 0x00000000); - OUTREG(RADEON_DP_WRITE_MASK, 0xffffffff); - - RADEONWaitForIdleMMIO(pScrn); -} - -/* Initialize the acceleration hardware */ -void RADEONEngineInit(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - - RADEONTRACE(("EngineInit (%d/%d)\n", - info->CurrentLayout.pixel_code, - info->CurrentLayout.bitsPerPixel)); - - OUTREG(RADEON_RB3D_CNTL, 0); - - RADEONEngineReset(pScrn); - - switch (info->CurrentLayout.pixel_code) { - case 8: info->datatype = 2; break; - case 15: info->datatype = 3; break; - case 16: info->datatype = 4; break; - case 24: info->datatype = 5; break; - case 32: info->datatype = 6; break; - default: - RADEONTRACE(("Unknown depth/bpp = %d/%d (code = %d)\n", - info->CurrentLayout.depth, - info->CurrentLayout.bitsPerPixel, - info->CurrentLayout.pixel_code)); - } - info->pitch = ((info->CurrentLayout.displayWidth / 8) * - (info->CurrentLayout.pixel_bytes == 3 ? 3 : 1)); - - RADEONTRACE(("Pitch for acceleration = %d\n", info->pitch)); - - info->dp_gui_master_cntl = - ((info->datatype << RADEON_GMC_DST_DATATYPE_SHIFT) - | RADEON_GMC_CLR_CMP_CNTL_DIS); - -#ifdef XF86DRI - info->sc_left = 0x00000000; - info->sc_right = RADEON_DEFAULT_SC_RIGHT_MAX; - info->sc_top = 0x00000000; - info->sc_bottom = RADEON_DEFAULT_SC_BOTTOM_MAX; - - info->re_top_left = 0x00000000; - info->re_width_height = ((0x7ff << RADEON_RE_WIDTH_SHIFT) | - (0x7ff << RADEON_RE_HEIGHT_SHIFT)); - - info->aux_sc_cntl = 0x00000000; -#endif - - RADEONEngineRestore(pScrn); -} - -#define ACCEL_MMIO -#define ACCEL_PREAMBLE() unsigned char *RADEONMMIO = info->MMIO -#define BEGIN_ACCEL(n) RADEONWaitForFifo(pScrn, (n)) -#define OUT_ACCEL_REG(reg, val) OUTREG(reg, val) -#define FINISH_ACCEL() - -#include "radeon_accelfuncs.c" - -#undef ACCEL_MMIO -#undef ACCEL_PREAMBLE -#undef BEGIN_ACCEL -#undef OUT_ACCEL_REG -#undef FINISH_ACCEL - -#ifdef XF86DRI - -#define ACCEL_CP -#define ACCEL_PREAMBLE() \ - RING_LOCALS; \ - RADEONCP_REFRESH(pScrn, info) -#define BEGIN_ACCEL(n) BEGIN_RING(2*(n)) -#define OUT_ACCEL_REG(reg, val) OUT_RING_REG(reg, val) -#define FINISH_ACCEL() ADVANCE_RING() - -#include "radeon_accelfuncs.c" - -#undef ACCEL_CP -#undef ACCEL_PREAMBLE -#undef BEGIN_ACCEL -#undef OUT_ACCEL_REG -#undef FINISH_ACCEL - -/* Stop the CP */ -int RADEONCPStop(ScrnInfoPtr pScrn, RADEONInfoPtr info) -{ - drmRadeonCPStop stop; - int ret, i; - - stop.flush = 1; - stop.idle = 1; - - ret = drmCommandWrite(info->drmFD, DRM_RADEON_CP_STOP, &stop, - sizeof(drmRadeonCPStop)); - - if (ret == 0) { - return 0; - } else if (errno != EBUSY) { - return -errno; - } - - stop.flush = 0; - - i = 0; - do { - ret = drmCommandWrite(info->drmFD, DRM_RADEON_CP_STOP, &stop, - sizeof(drmRadeonCPStop)); - } while (ret && errno == EBUSY && i++ < RADEON_IDLE_RETRY); - - if (ret == 0) { - return 0; - } else if (errno != EBUSY) { - return -errno; - } - - stop.idle = 0; - - if (drmCommandWrite(info->drmFD, DRM_RADEON_CP_STOP, - &stop, sizeof(drmRadeonCPStop))) { - return -errno; - } else { - return 0; - } -} - -/* Get an indirect buffer for the CP 2D acceleration commands */ -drmBufPtr RADEONCPGetBuffer(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - drmDMAReq dma; - drmBufPtr buf = NULL; - int indx = 0; - int size = 0; - int i = 0; - int ret; - -#if 0 - /* FIXME: pScrn->pScreen has not been initialized when this is first - * called from RADEONSelectBuffer via RADEONDRICPInit. We could use - * the screen index from pScrn, which is initialized, and then get - * the screen from screenInfo.screens[index], but that is a hack. - */ - dma.context = DRIGetContext(pScrn->pScreen); -#else - /* This is the X server's context */ - dma.context = 0x00000001; -#endif - - dma.send_count = 0; - dma.send_list = NULL; - dma.send_sizes = NULL; - dma.flags = 0; - dma.request_count = 1; - dma.request_size = RADEON_BUFFER_SIZE; - dma.request_list = &indx; - dma.request_sizes = &size; - dma.granted_count = 0; - - while (1) { - do { - ret = drmDMA(info->drmFD, &dma); - if (ret && ret != -EBUSY) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "%s: CP GetBuffer %d\n", __FUNCTION__, ret); - } - } while ((ret == -EBUSY) && (i++ < RADEON_TIMEOUT)); - - if (ret == 0) { - buf = &info->buffers->list[indx]; - buf->used = 0; - if (RADEON_VERBOSE) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - " GetBuffer returning %d %08x\n", - buf->idx, buf->address); - } - return buf; - } - - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "GetBuffer timed out, resetting engine...\n"); - RADEONEngineReset(pScrn); - RADEONEngineRestore(pScrn); - - /* Always restart the engine when doing CP 2D acceleration */ - RADEONCP_RESET(pScrn, info); - RADEONCP_START(pScrn, info); - } -} - -/* Flush the indirect buffer to the kernel for submission to the card */ -void RADEONCPFlushIndirect(ScrnInfoPtr pScrn, int discard) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - drmBufPtr buffer = info->indirectBuffer; - int start = info->indirectStart; - drmRadeonIndirect indirect; - - if (!buffer) return; - if (start == buffer->used && !discard) return; - - if (RADEON_VERBOSE) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Flushing buffer %d\n", - buffer->idx); - } - - indirect.idx = buffer->idx; - indirect.start = start; - indirect.end = buffer->used; - indirect.discard = discard; - - drmCommandWriteRead(info->drmFD, DRM_RADEON_INDIRECT, - &indirect, sizeof(drmRadeonIndirect)); - - if (discard) { - info->indirectBuffer = RADEONCPGetBuffer(pScrn); - info->indirectStart = 0; - } else { - /* Start on a double word boundary */ - info->indirectStart = buffer->used = (buffer->used + 7) & ~7; - if (RADEON_VERBOSE) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, " Starting at %d\n", - info->indirectStart); - } - } -} - -/* Flush and release the indirect buffer */ -void RADEONCPReleaseIndirect(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - drmBufPtr buffer = info->indirectBuffer; - int start = info->indirectStart; - drmRadeonIndirect indirect; - - info->indirectBuffer = NULL; - info->indirectStart = 0; - - if (!buffer) return; - - if (RADEON_VERBOSE) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Releasing buffer %d\n", - buffer->idx); - } - - indirect.idx = buffer->idx; - indirect.start = start; - indirect.end = buffer->used; - indirect.discard = 1; - - drmCommandWriteRead(info->drmFD, DRM_RADEON_INDIRECT, - &indirect, sizeof(drmRadeonIndirect)); -} -#endif - -/* Initialize XAA for supported acceleration and also initialize the - * graphics hardware for acceleration - */ -Bool RADEONAccelInit(ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - RADEONInfoPtr info = RADEONPTR(pScrn); - XAAInfoRecPtr a; - - if (!(a = info->accel = XAACreateInfoRec())) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "XAACreateInfoRec Error\n"); - return FALSE; - } - -#ifdef XF86DRI - if (info->directRenderingEnabled) - RADEONAccelInitCP(pScreen, a); - else -#endif - RADEONAccelInitMMIO(pScreen, a); - - RADEONEngineInit(pScrn); - - if (!XAAInit(pScreen, a)) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "XAAInit Error\n"); - return FALSE; - } - - return TRUE; -} diff --git a/src/radeon_accelfuncs.c b/src/radeon_accelfuncs.c deleted file mode 100644 index 2dbd6b23..00000000 --- a/src/radeon_accelfuncs.c +++ /dev/null @@ -1,1358 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accelfuncs.c,v 1.7 2003/04/06 20:07:33 martin Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * Rickard E. Faith <faith@valinux.com> - * Alan Hourihane <alanh@fairlite.demon.co.uk> - * Michel Dänzer <michel@daenzer.net> - * - * Credits: - * - * Thanks to Ani Joshi <ajoshi@shell.unixbox.com> for providing source - * code to his Radeon driver. Portions of this file are based on the - * initialization code for that driver. - * - * References: - * - * !!!! FIXME !!!! - * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical - * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April - * 1999. - * - * RAGE 128 Software Development Manual (Technical Reference Manual P/N - * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. - * - * Notes on unimplemented XAA optimizations: - * - * SetClipping: This has been removed as XAA expects 16bit registers - * for full clipping. - * TwoPointLine: The Radeon supports this. Not Bresenham. - * DashedLine with non-power-of-two pattern length: Apparently, there is - * no way to set the length of the pattern -- it is always - * assumed to be 8 or 32 (or 1024?). - * ScreenToScreenColorExpandFill: See p. 4-17 of the Technical Reference - * Manual where it states that monochrome expansion of frame - * buffer data is not supported. - * CPUToScreenColorExpandFill, direct: The implementation here uses a hybrid - * direct/indirect method. If we had more data registers, - * then we could do better. If XAA supported a trigger write - * address, the code would be simpler. - * Color8x8PatternFill: Apparently, an 8x8 color brush cannot take an 8x8 - * pattern from frame buffer memory. - * ImageWrites: Same as CPUToScreenColorExpandFill - * - */ - -#if defined(ACCEL_MMIO) && defined(ACCEL_CP) -#error Cannot define both MMIO and CP acceleration! -#endif - -#if !defined(UNIXCPP) || defined(ANSICPP) -#define FUNC_NAME_CAT(prefix,suffix) prefix##suffix -#else -#define FUNC_NAME_CAT(prefix,suffix) prefix/**/suffix -#endif - -#ifdef ACCEL_MMIO -#define FUNC_NAME(prefix) FUNC_NAME_CAT(prefix,MMIO) -#else -#ifdef ACCEL_CP -#define FUNC_NAME(prefix) FUNC_NAME_CAT(prefix,CP) -#else -#error No accel type defined! -#endif -#endif - -/* MMIO: - * - * Wait for the graphics engine to be completely idle: the FIFO has - * drained, the Pixel Cache is flushed, and the engine is idle. This is - * a standard "sync" function that will make the hardware "quiescent". - * - * CP: - * - * Wait until the CP is completely idle: the FIFO has drained and the CP - * is idle. - */ -void -FUNC_NAME(RADEONWaitForIdle)(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - int i = 0; - -#ifdef ACCEL_CP - /* Make sure the CP is idle first */ - if (info->CPStarted) { - int ret; - FLUSH_RING(); - - for (;;) { - do { - ret = drmCommandNone(info->drmFD, DRM_RADEON_CP_IDLE); - if (ret && ret != -EBUSY) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "%s: CP idle %d\n", __FUNCTION__, ret); - } - } while ((ret == -EBUSY) && (i++ < RADEON_TIMEOUT)); - - if (ret == 0) return; - - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Idle timed out, resetting engine...\n"); - RADEONEngineReset(pScrn); - RADEONEngineRestore(pScrn); - - /* Always restart the engine when doing CP 2D acceleration */ - RADEONCP_RESET(pScrn, info); - RADEONCP_START(pScrn, info); - } - } -#endif - - RADEONTRACE(("WaitForIdle (entering): %d entries, stat=0x%08x\n", - INREG(RADEON_RBBM_STATUS) & RADEON_RBBM_FIFOCNT_MASK, - INREG(RADEON_RBBM_STATUS))); - - /* Wait for the engine to go idle */ - RADEONWaitForFifoFunction(pScrn, 64); - - for (;;) { - for (i = 0; i < RADEON_TIMEOUT; i++) { - if (!(INREG(RADEON_RBBM_STATUS) & RADEON_RBBM_ACTIVE)) { - RADEONEngineFlush(pScrn); - return; - } - } - RADEONTRACE(("Idle timed out: %d entries, stat=0x%08x\n", - INREG(RADEON_RBBM_STATUS) & RADEON_RBBM_FIFOCNT_MASK, - INREG(RADEON_RBBM_STATUS))); - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Idle timed out, resetting engine...\n"); - RADEONEngineReset(pScrn); - RADEONEngineRestore(pScrn); -#ifdef XF86DRI - if (info->directRenderingEnabled) { - RADEONCP_RESET(pScrn, info); - RADEONCP_START(pScrn, info); - } -#endif - } -} - -/* This callback is required for multiheader cards using XAA */ -static void -FUNC_NAME(RADEONRestoreAccelState)(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - -#ifdef ACCEL_MMIO - - CARD32 pitch64; - - pitch64 = ((pScrn->displayWidth * (pScrn->bitsPerPixel / 8) + 0x3f)) >> 6; - - OUTREG(RADEON_DEFAULT_OFFSET, ((info->fbLocation + pScrn->fbOffset) >> 10) - | (pitch64 << 22)); - - /* FIXME: May need to restore other things, like BKGD_CLK FG_CLK... */ - - RADEONWaitForIdleMMIO(pScrn); - -#else /* ACCEL_CP */ - - RADEONWaitForFifo(pScrn, 1); - OUTREG(RADEON_DEFAULT_OFFSET, info->frontPitchOffset); - - RADEONWaitForIdleMMIO(pScrn); - -#if 0 - /* Not working yet */ - RADEONMMIO_TO_CP(pScrn, info); -#endif - - /* FIXME: May need to restore other things, like BKGD_CLK FG_CLK... */ -#endif -} - -/* Setup for XAA SolidFill */ -static void -FUNC_NAME(RADEONSetupForSolidFill)(ScrnInfoPtr pScrn, - int color, - int rop, - unsigned int planemask) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - /* Save for later clipping */ - info->dp_gui_master_cntl_clip = (info->dp_gui_master_cntl - | RADEON_GMC_BRUSH_SOLID_COLOR - | RADEON_GMC_SRC_DATATYPE_COLOR - | RADEON_ROP[rop].pattern); - - BEGIN_ACCEL(4); - - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, info->dp_gui_master_cntl_clip); - OUT_ACCEL_REG(RADEON_DP_BRUSH_FRGD_CLR, color); - OUT_ACCEL_REG(RADEON_DP_WRITE_MASK, planemask); - OUT_ACCEL_REG(RADEON_DP_CNTL, (RADEON_DST_X_LEFT_TO_RIGHT - | RADEON_DST_Y_TOP_TO_BOTTOM)); - - FINISH_ACCEL(); -} - -/* Subsequent XAA SolidFillRect - * - * Tests: xtest CH06/fllrctngl, xterm - */ -static void -FUNC_NAME(RADEONSubsequentSolidFillRect)(ScrnInfoPtr pScrn, - int x, int y, - int w, int h) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - BEGIN_ACCEL(2); - - OUT_ACCEL_REG(RADEON_DST_Y_X, (y << 16) | x); - OUT_ACCEL_REG(RADEON_DST_WIDTH_HEIGHT, (w << 16) | h); - - FINISH_ACCEL(); -} - -/* Setup for XAA solid lines */ -static void -FUNC_NAME(RADEONSetupForSolidLine)(ScrnInfoPtr pScrn, - int color, - int rop, - unsigned int planemask) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - /* Save for later clipping */ - info->dp_gui_master_cntl_clip = (info->dp_gui_master_cntl - | RADEON_GMC_BRUSH_SOLID_COLOR - | RADEON_GMC_SRC_DATATYPE_COLOR - | RADEON_ROP[rop].pattern); - - if (info->ChipFamily >= CHIP_FAMILY_RV200) { - BEGIN_ACCEL(1); - OUT_ACCEL_REG(RADEON_DST_LINE_PATCOUNT, - 0x55 << RADEON_BRES_CNTL_SHIFT); - } - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, info->dp_gui_master_cntl_clip); - OUT_ACCEL_REG(RADEON_DP_BRUSH_FRGD_CLR, color); - OUT_ACCEL_REG(RADEON_DP_WRITE_MASK, planemask); - - FINISH_ACCEL(); -} - -/* Subsequent XAA solid horizontal and vertical lines */ -static void -FUNC_NAME(RADEONSubsequentSolidHorVertLine)(ScrnInfoPtr pScrn, - int x, int y, - int len, - int dir) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - int w = 1; - int h = 1; - ACCEL_PREAMBLE(); - - if (dir == DEGREES_0) w = len; - else h = len; - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_DP_CNTL, (RADEON_DST_X_LEFT_TO_RIGHT - | RADEON_DST_Y_TOP_TO_BOTTOM)); - OUT_ACCEL_REG(RADEON_DST_Y_X, (y << 16) | x); - OUT_ACCEL_REG(RADEON_DST_WIDTH_HEIGHT, (w << 16) | h); - - FINISH_ACCEL(); -} - -/* Subsequent XAA solid TwoPointLine line - * - * Tests: xtest CH06/drwln, ico, Mark Vojkovich's linetest program - * - * [See http://www.xfree86.org/devel/archives/devel/1999-Jun/0102.shtml for - * Mark Vojkovich's linetest program, posted 2Jun99 to devel@xfree86.org.] - */ -static void -FUNC_NAME(RADEONSubsequentSolidTwoPointLine)(ScrnInfoPtr pScrn, - int xa, int ya, - int xb, int yb, - int flags) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - /* TODO: Check bounds -- RADEON only has 14 bits */ - - if (!(flags & OMIT_LAST)) - FUNC_NAME(RADEONSubsequentSolidHorVertLine)(pScrn, - xb, yb, 1, - DEGREES_0); - - BEGIN_ACCEL(2); - - OUT_ACCEL_REG(RADEON_DST_LINE_START, (ya << 16) | xa); - OUT_ACCEL_REG(RADEON_DST_LINE_END, (yb << 16) | xb); - - FINISH_ACCEL(); -} - -/* Setup for XAA dashed lines - * - * Tests: xtest CH05/stdshs, XFree86/drwln - * - * NOTE: Since we can only accelerate lines with power-of-2 patterns of - * length <= 32 - */ -static void -FUNC_NAME(RADEONSetupForDashedLine)(ScrnInfoPtr pScrn, - int fg, - int bg, - int rop, - unsigned int planemask, - int length, - unsigned char *pattern) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - CARD32 pat = *(CARD32 *)(pointer)pattern; - ACCEL_PREAMBLE(); - - /* Save for determining whether or not to draw last pixel */ - info->dashLen = length; - info->dashPattern = pat; - -#if X_BYTE_ORDER == X_BIG_ENDIAN -# define PAT_SHIFT(pat, shift) (pat >> shift) -#else -# define PAT_SHIFT(pat, shift) (pat << shift) -#endif - - switch (length) { - case 2: pat |= PAT_SHIFT(pat, 2); /* fall through */ - case 4: pat |= PAT_SHIFT(pat, 4); /* fall through */ - case 8: pat |= PAT_SHIFT(pat, 8); /* fall through */ - case 16: pat |= PAT_SHIFT(pat, 16); - } - - /* Save for later clipping */ - info->dp_gui_master_cntl_clip = (info->dp_gui_master_cntl - | (bg == -1 - ? RADEON_GMC_BRUSH_32x1_MONO_FG_LA - : RADEON_GMC_BRUSH_32x1_MONO_FG_BG) - | RADEON_ROP[rop].pattern - | RADEON_GMC_BYTE_LSB_TO_MSB); - info->dash_fg = fg; - info->dash_bg = bg; - - BEGIN_ACCEL((bg == -1) ? 4 : 5); - - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, info->dp_gui_master_cntl_clip); - OUT_ACCEL_REG(RADEON_DP_WRITE_MASK, planemask); - OUT_ACCEL_REG(RADEON_DP_BRUSH_FRGD_CLR, fg); - if (bg != -1) - OUT_ACCEL_REG(RADEON_DP_BRUSH_BKGD_CLR, bg); - OUT_ACCEL_REG(RADEON_BRUSH_DATA0, pat); - - FINISH_ACCEL(); -} - -/* Helper function to draw last point for dashed lines */ -static void -FUNC_NAME(RADEONDashedLastPel)(ScrnInfoPtr pScrn, - int x, int y, - int fg) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - CARD32 dp_gui_master_cntl = info->dp_gui_master_cntl_clip; - ACCEL_PREAMBLE(); - - dp_gui_master_cntl &= ~RADEON_GMC_BRUSH_DATATYPE_MASK; - dp_gui_master_cntl |= RADEON_GMC_BRUSH_SOLID_COLOR; - - dp_gui_master_cntl &= ~RADEON_GMC_SRC_DATATYPE_MASK; - dp_gui_master_cntl |= RADEON_GMC_SRC_DATATYPE_COLOR; - - BEGIN_ACCEL(7); - - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, dp_gui_master_cntl); - OUT_ACCEL_REG(RADEON_DP_BRUSH_FRGD_CLR, fg); - OUT_ACCEL_REG(RADEON_DP_CNTL, (RADEON_DST_X_LEFT_TO_RIGHT - | RADEON_DST_Y_TOP_TO_BOTTOM)); - OUT_ACCEL_REG(RADEON_DST_Y_X, (y << 16) | x); - OUT_ACCEL_REG(RADEON_DST_WIDTH_HEIGHT, (1 << 16) | 1); - - /* Restore old values */ - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, info->dp_gui_master_cntl_clip); - OUT_ACCEL_REG(RADEON_DP_BRUSH_FRGD_CLR, info->dash_fg); - - FINISH_ACCEL(); -} - -/* Subsequent XAA dashed line */ -static void -FUNC_NAME(RADEONSubsequentDashedTwoPointLine)(ScrnInfoPtr pScrn, - int xa, int ya, - int xb, int yb, - int flags, - int phase) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - /* TODO: Check bounds -- RADEON only has 14 bits */ - - if (!(flags & OMIT_LAST)) { - int deltax = abs(xa - xb); - int deltay = abs(ya - yb); - int shift; - - if (deltax > deltay) shift = deltax; - else shift = deltay; - - shift += phase; - shift %= info->dashLen; - - if ((info->dashPattern >> shift) & 1) - FUNC_NAME(RADEONDashedLastPel)(pScrn, xb, yb, info->dash_fg); - else if (info->dash_bg != -1) - FUNC_NAME(RADEONDashedLastPel)(pScrn, xb, yb, info->dash_bg); - } - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_DST_LINE_START, (ya << 16) | xa); - OUT_ACCEL_REG(RADEON_DST_LINE_PATCOUNT, phase); - OUT_ACCEL_REG(RADEON_DST_LINE_END, (yb << 16) | xb); - - FINISH_ACCEL(); -} - -/* Set up for transparency - * - * Mmmm, Seems as though the transparency compare is opposite to r128. - * It should only draw when source != trans_color, this is the opposite - * of that. - */ -static void -FUNC_NAME(RADEONSetTransparency)(ScrnInfoPtr pScrn, - int trans_color) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - - if ((trans_color != -1) || (info->XAAForceTransBlit == TRUE)) { - ACCEL_PREAMBLE(); - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_CLR_CMP_CLR_SRC, trans_color); - OUT_ACCEL_REG(RADEON_CLR_CMP_MASK, RADEON_CLR_CMP_MSK); - OUT_ACCEL_REG(RADEON_CLR_CMP_CNTL, (RADEON_SRC_CMP_EQ_COLOR - | RADEON_CLR_CMP_SRC_SOURCE)); - - FINISH_ACCEL(); - } -} - -/* Setup for XAA screen-to-screen copy - * - * Tests: xtest CH06/fllrctngl (also tests transparency) - */ -static void -FUNC_NAME(RADEONSetupForScreenToScreenCopy)(ScrnInfoPtr pScrn, - int xdir, int ydir, - int rop, - unsigned int planemask, - int trans_color) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - info->xdir = xdir; - info->ydir = ydir; - - /* Save for later clipping */ - info->dp_gui_master_cntl_clip = (info->dp_gui_master_cntl - | RADEON_GMC_BRUSH_NONE - | RADEON_GMC_SRC_DATATYPE_COLOR - | RADEON_ROP[rop].rop - | RADEON_DP_SRC_SOURCE_MEMORY); - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, info->dp_gui_master_cntl_clip); - OUT_ACCEL_REG(RADEON_DP_WRITE_MASK, planemask); - OUT_ACCEL_REG(RADEON_DP_CNTL, - ((xdir >= 0 ? RADEON_DST_X_LEFT_TO_RIGHT : 0) | - (ydir >= 0 ? RADEON_DST_Y_TOP_TO_BOTTOM : 0))); - - FINISH_ACCEL(); - - info->trans_color = trans_color; - FUNC_NAME(RADEONSetTransparency)(pScrn, trans_color); -} - -/* Subsequent XAA screen-to-screen copy */ -static void -FUNC_NAME(RADEONSubsequentScreenToScreenCopy)(ScrnInfoPtr pScrn, - int xa, int ya, - int xb, int yb, - int w, int h) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - if (info->xdir < 0) xa += w - 1, xb += w - 1; - if (info->ydir < 0) ya += h - 1, yb += h - 1; - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_SRC_Y_X, (ya << 16) | xa); - OUT_ACCEL_REG(RADEON_DST_Y_X, (yb << 16) | xb); - OUT_ACCEL_REG(RADEON_DST_HEIGHT_WIDTH, (h << 16) | w); - - FINISH_ACCEL(); -} - -/* Setup for XAA mono 8x8 pattern color expansion. Patterns with - * transparency use `bg == -1'. This routine is only used if the XAA - * pixmap cache is turned on. - * - * Tests: xtest XFree86/fllrctngl (no other test will test this routine with - * both transparency and non-transparency) - */ -static void -FUNC_NAME(RADEONSetupForMono8x8PatternFill)(ScrnInfoPtr pScrn, - int patternx, - int patterny, - int fg, - int bg, - int rop, - unsigned int planemask) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); -#if X_BYTE_ORDER == X_BIG_ENDIAN - unsigned char pattern[8]; -#endif - ACCEL_PREAMBLE(); - -#if X_BYTE_ORDER == X_BIG_ENDIAN - /* Take care of endianness */ - pattern[0] = (patternx & 0x000000ff); - pattern[1] = (patternx & 0x0000ff00) >> 8; - pattern[2] = (patternx & 0x00ff0000) >> 16; - pattern[3] = (patternx & 0xff000000) >> 24; - pattern[4] = (patterny & 0x000000ff); - pattern[5] = (patterny & 0x0000ff00) >> 8; - pattern[6] = (patterny & 0x00ff0000) >> 16; - pattern[7] = (patterny & 0xff000000) >> 24; -#endif - - /* Save for later clipping */ - info->dp_gui_master_cntl_clip = (info->dp_gui_master_cntl - | (bg == -1 - ? RADEON_GMC_BRUSH_8X8_MONO_FG_LA - : RADEON_GMC_BRUSH_8X8_MONO_FG_BG) - | RADEON_ROP[rop].pattern -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - | RADEON_GMC_BYTE_MSB_TO_LSB -#endif - ); - - BEGIN_ACCEL((bg == -1) ? 5 : 6); - - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, info->dp_gui_master_cntl_clip); - OUT_ACCEL_REG(RADEON_DP_WRITE_MASK, planemask); - OUT_ACCEL_REG(RADEON_DP_BRUSH_FRGD_CLR, fg); - if (bg != -1) - OUT_ACCEL_REG(RADEON_DP_BRUSH_BKGD_CLR, bg); -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - OUT_ACCEL_REG(RADEON_BRUSH_DATA0, patternx); - OUT_ACCEL_REG(RADEON_BRUSH_DATA1, patterny); -#else - OUT_ACCEL_REG(RADEON_BRUSH_DATA0, *(CARD32 *)(pointer)&pattern[0]); - OUT_ACCEL_REG(RADEON_BRUSH_DATA1, *(CARD32 *)(pointer)&pattern[4]); -#endif - - FINISH_ACCEL(); -} - -/* Subsequent XAA 8x8 pattern color expansion. Because they are used in - * the setup function, `patternx' and `patterny' are not used here. - */ -static void -FUNC_NAME(RADEONSubsequentMono8x8PatternFillRect)(ScrnInfoPtr pScrn, - int patternx, - int patterny, - int x, int y, - int w, int h) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_BRUSH_Y_X, (patterny << 8) | patternx); - OUT_ACCEL_REG(RADEON_DST_Y_X, (y << 16) | x); - OUT_ACCEL_REG(RADEON_DST_HEIGHT_WIDTH, (h << 16) | w); - - FINISH_ACCEL(); -} - -#if 0 -/* Setup for XAA color 8x8 pattern fill - * - * Tests: xtest XFree86/fllrctngl (with Mono8x8PatternFill off) - */ -static void -FUNC_NAME(RADEONSetupForColor8x8PatternFill)(ScrnInfoPtr pScrn, - int patx, int paty, - int rop, - unsigned int planemask, - int trans_color) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - /* Save for later clipping */ - info->dp_gui_master_cntl_clip = (info->dp_gui_master_cntl - | RADEON_GMC_BRUSH_8x8_COLOR - | RADEON_GMC_SRC_DATATYPE_COLOR - | RADEON_ROP[rop].pattern - | RADEON_DP_SRC_SOURCE_MEMORY); - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, info->dp_gui_master_cntl_clip); - OUT_ACCEL_REG(RADEON_DP_WRITE_MASK, planemask); - OUT_ACCEL_REG(RADEON_SRC_Y_X, (paty << 16) | patx); - - FINISH_ACCEL(); - - info->trans_color = trans_color; - FUNC_NAME(RADEONSetTransparency)(pScrn, trans_color); -} - -/* Subsequent XAA 8x8 pattern color expansion */ -static void -FUNC_NAME(RADEONSubsequentColor8x8PatternFillRect)(ScrnInfoPtr pScrn, - int patx, int paty, - int x, int y, - int w, int h) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_BRUSH_Y_X, (paty << 16) | patx); - OUT_ACCEL_REG(RADEON_DST_Y_X, (y << 16) | x); - OUT_ACCEL_REG(RADEON_DST_HEIGHT_WIDTH, (h << 16) | w); - - FINISH_ACCEL(); -} -#endif - -#ifdef ACCEL_CP -#define CP_BUFSIZE (info->indirectBuffer->total/4-9) - -/* Helper function to write out a HOSTDATA_BLT packet into the indirect - * buffer and set the XAA scratch buffer address appropriately. - */ -static void -RADEONCPScanlinePacket(ScrnInfoPtr pScrn, int bufno) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - int chunk_words = info->scanline_hpass * info->scanline_words; - ACCEL_PREAMBLE(); - - if (RADEON_VERBOSE) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "CPScanline Packet h=%d hpass=%d chunkwords=%d\n", - info->scanline_h, info->scanline_hpass, chunk_words); - } - BEGIN_RING(chunk_words+9); - - OUT_RING(CP_PACKET3(RADEON_CP_PACKET3_CNTL_HOSTDATA_BLT,chunk_words+9-2)); - OUT_RING(info->dp_gui_master_cntl_clip); - OUT_RING((info->scanline_y << 16) | - (info->scanline_x1clip & 0xffff)); - OUT_RING(((info->scanline_y+info->scanline_hpass) << 16) | - (info->scanline_x2clip & 0xffff)); - OUT_RING(info->scanline_fg); - OUT_RING(info->scanline_bg); - OUT_RING((info->scanline_y << 16) | - (info->scanline_x & 0xffff)); - OUT_RING((info->scanline_hpass << 16) | - (info->scanline_w & 0xffff)); - OUT_RING(chunk_words); - - info->scratch_buffer[bufno] = (unsigned char *)&__head[__count]; - __count += chunk_words; - - /* The ring can only be advanced after the __head and __count have - been adjusted above */ - FINISH_ACCEL(); - - info->scanline_y += info->scanline_hpass; - info->scanline_h -= info->scanline_hpass; -} -#endif - -/* Setup for XAA indirect CPU-to-screen color expansion (indirect). - * Because of how the scratch buffer is initialized, this is really a - * mainstore-to-screen color expansion. Transparency is supported when - * `bg == -1'. - */ -static void -FUNC_NAME(RADEONSetupForScanlineCPUToScreenColorExpandFill)(ScrnInfoPtr pScrn, - int fg, - int bg, - int rop, - unsigned int - planemask) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - /* Save for later clipping */ - info->dp_gui_master_cntl_clip = (info->dp_gui_master_cntl - | RADEON_GMC_DST_CLIPPING - | RADEON_GMC_BRUSH_NONE - | (bg == -1 - ? RADEON_GMC_SRC_DATATYPE_MONO_FG_LA - : RADEON_GMC_SRC_DATATYPE_MONO_FG_BG) - | RADEON_ROP[rop].rop -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - | RADEON_GMC_BYTE_LSB_TO_MSB -#else - | RADEON_GMC_BYTE_MSB_TO_LSB -#endif - | RADEON_DP_SRC_SOURCE_HOST_DATA); - -#ifdef ACCEL_MMIO - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - BEGIN_ACCEL(4); -#else - BEGIN_ACCEL(5); - - OUT_ACCEL_REG(RADEON_RBBM_GUICNTL, RADEON_HOST_DATA_SWAP_NONE); -#endif - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, info->dp_gui_master_cntl_clip); - OUT_ACCEL_REG(RADEON_DP_WRITE_MASK, planemask); - OUT_ACCEL_REG(RADEON_DP_SRC_FRGD_CLR, fg); - OUT_ACCEL_REG(RADEON_DP_SRC_BKGD_CLR, bg); - -#else /* ACCEL_CP */ - - info->scanline_fg = fg; - info->scanline_bg = bg; - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - BEGIN_ACCEL(1); -#else - BEGIN_ACCEL(2); - - OUT_ACCEL_REG(RADEON_RBBM_GUICNTL, RADEON_HOST_DATA_SWAP_32BIT); -#endif - OUT_ACCEL_REG(RADEON_DP_WRITE_MASK, planemask); - -#endif - - FINISH_ACCEL(); -} - -/* Subsequent XAA indirect CPU-to-screen color expansion. This is only - * called once for each rectangle. - */ -static void -FUNC_NAME(RADEONSubsequentScanlineCPUToScreenColorExpandFill)(ScrnInfoPtr - pScrn, - int x, int y, - int w, int h, - int skipleft) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); -#ifdef ACCEL_MMIO - ACCEL_PREAMBLE(); - - info->scanline_h = h; - info->scanline_words = (w + 31) >> 5; - -#ifdef __alpha__ - /* Always use indirect for Alpha */ - if (0) -#else - if ((info->scanline_words * h) <= 9) -#endif - { - /* Turn on direct for less than 9 dword colour expansion */ - info->scratch_buffer[0] = - (unsigned char *)(ADDRREG(RADEON_HOST_DATA_LAST) - - (info->scanline_words - 1)); - info->scanline_direct = 1; - } else { - /* Use indirect for anything else */ - info->scratch_buffer[0] = info->scratch_save; - info->scanline_direct = 0; - } - - BEGIN_ACCEL(4 + (info->scanline_direct ? - (info->scanline_words * h) : 0)); - - OUT_ACCEL_REG(RADEON_SC_TOP_LEFT, (y << 16) | ((x+skipleft) - & 0xffff)); - OUT_ACCEL_REG(RADEON_SC_BOTTOM_RIGHT, ((y+h) << 16) | ((x+w) & 0xffff)); - OUT_ACCEL_REG(RADEON_DST_Y_X, (y << 16) | (x & 0xffff)); - /* Have to pad the width here and use clipping engine */ - OUT_ACCEL_REG(RADEON_DST_HEIGHT_WIDTH, (h << 16) | ((w + 31) & ~31)); - - FINISH_ACCEL(); - -#else /* ACCEL_CP */ - - info->scanline_x = x; - info->scanline_y = y; - /* Have to pad the width here and use clipping engine */ - info->scanline_w = (w + 31) & ~31; - info->scanline_h = h; - - info->scanline_x1clip = x + skipleft; - info->scanline_x2clip = x + w; - - info->scanline_words = info->scanline_w / 32; - info->scanline_hpass = min(h,(CP_BUFSIZE/info->scanline_words)); - - RADEONCPScanlinePacket(pScrn, 0); - -#endif -} - -/* Subsequent XAA indirect CPU-to-screen color expansion and indirect - * image write. This is called once for each scanline. - */ -static void -FUNC_NAME(RADEONSubsequentScanline)(ScrnInfoPtr pScrn, - int bufno) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); -#ifdef ACCEL_MMIO - CARD32 *p = (pointer)info->scratch_buffer[bufno]; - int i; - int left = info->scanline_words; - volatile CARD32 *d; - ACCEL_PREAMBLE(); - - if (info->scanline_direct) return; - - --info->scanline_h; - - while (left) { - write_mem_barrier(); - if (left <= 8) { - /* Last scanline - finish write to DATA_LAST */ - if (info->scanline_h == 0) { - BEGIN_ACCEL(left); - /* Unrolling doesn't improve performance */ - for (d = ADDRREG(RADEON_HOST_DATA_LAST) - (left - 1); left; --left) - *d++ = *p++; - return; - } else { - BEGIN_ACCEL(left); - /* Unrolling doesn't improve performance */ - for (d = ADDRREG(RADEON_HOST_DATA7) - (left - 1); left; --left) - *d++ = *p++; - } - } else { - BEGIN_ACCEL(8); - /* Unrolling doesn't improve performance */ - for (d = ADDRREG(RADEON_HOST_DATA0), i = 0; i < 8; i++) - *d++ = *p++; - left -= 8; - } - } - - FINISH_ACCEL(); - -#else /* ACCEL_CP */ - - if (--info->scanline_hpass) { - info->scratch_buffer[bufno] += 4 * info->scanline_words; - } else if (info->scanline_h) { - info->scanline_hpass = - min(info->scanline_h,(CP_BUFSIZE/info->scanline_words)); - RADEONCPScanlinePacket(pScrn, bufno); - } - -#endif -} - -/* Setup for XAA indirect image write */ -static void -FUNC_NAME(RADEONSetupForScanlineImageWrite)(ScrnInfoPtr pScrn, - int rop, - unsigned int planemask, - int trans_color, - int bpp, - int depth) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - info->scanline_bpp = bpp; - - /* Save for later clipping */ - info->dp_gui_master_cntl_clip = (info->dp_gui_master_cntl - | RADEON_GMC_DST_CLIPPING - | RADEON_GMC_BRUSH_NONE - | RADEON_GMC_SRC_DATATYPE_COLOR - | RADEON_ROP[rop].rop - | RADEON_GMC_BYTE_MSB_TO_LSB - | RADEON_DP_SRC_SOURCE_HOST_DATA); - -#ifdef ACCEL_MMIO - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - BEGIN_ACCEL(2); -#else - BEGIN_ACCEL(3); - - if (bpp == 16) - OUT_ACCEL_REG(RADEON_RBBM_GUICNTL, RADEON_HOST_DATA_SWAP_16BIT); - else if (bpp == 32) - OUT_ACCEL_REG(RADEON_RBBM_GUICNTL, RADEON_HOST_DATA_SWAP_32BIT); - else - OUT_ACCEL_REG(RADEON_RBBM_GUICNTL, RADEON_HOST_DATA_SWAP_NONE); -#endif - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, info->dp_gui_master_cntl_clip); - -#else /* ACCEL_CP */ - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - BEGIN_ACCEL(1); -#else - BEGIN_ACCEL(2); - - if (bpp == 16) - OUT_ACCEL_REG(RADEON_RBBM_GUICNTL, RADEON_HOST_DATA_SWAP_HDW); - else - OUT_ACCEL_REG(RADEON_RBBM_GUICNTL, RADEON_HOST_DATA_SWAP_NONE); -#endif -#endif - OUT_ACCEL_REG(RADEON_DP_WRITE_MASK, planemask); - - FINISH_ACCEL(); - - info->trans_color = trans_color; - FUNC_NAME(RADEONSetTransparency)(pScrn, trans_color); -} - -/* Subsequent XAA indirect image write. This is only called once for - * each rectangle. - */ -static void -FUNC_NAME(RADEONSubsequentScanlineImageWriteRect)(ScrnInfoPtr pScrn, - int x, int y, - int w, int h, - int skipleft) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - -#ifdef ACCEL_MMIO - - int shift = 0; /* 32bpp */ - ACCEL_PREAMBLE(); - - if (pScrn->bitsPerPixel == 8) shift = 3; - else if (pScrn->bitsPerPixel == 16) shift = 1; - - info->scanline_h = h; - info->scanline_words = (w * info->scanline_bpp + 31) >> 5; - -#ifdef __alpha__ - /* Always use indirect for Alpha */ - if (0) -#else - if ((info->scanline_words * h) <= 9) -#endif - { - /* Turn on direct for less than 9 dword colour expansion */ - info->scratch_buffer[0] - = (unsigned char *)(ADDRREG(RADEON_HOST_DATA_LAST) - - (info->scanline_words - 1)); - info->scanline_direct = 1; - } else { - /* Use indirect for anything else */ - info->scratch_buffer[0] = info->scratch_save; - info->scanline_direct = 0; - } - - BEGIN_ACCEL(4 + (info->scanline_direct ? - (info->scanline_words * h) : 0)); - - OUT_ACCEL_REG(RADEON_SC_TOP_LEFT, (y << 16) | ((x+skipleft) - & 0xffff)); - OUT_ACCEL_REG(RADEON_SC_BOTTOM_RIGHT, ((y+h) << 16) | ((x+w) & 0xffff)); - OUT_ACCEL_REG(RADEON_DST_Y_X, (y << 16) | (x & 0xffff)); - /* Have to pad the width here and use clipping engine */ - OUT_ACCEL_REG(RADEON_DST_HEIGHT_WIDTH, (h << 16) | ((w + shift) & - ~shift)); - - FINISH_ACCEL(); - -#else /* ACCEL_CP */ - - int pad = 0; /* 32bpp */ - - if (pScrn->bitsPerPixel == 8) pad = 3; - else if (pScrn->bitsPerPixel == 16) pad = 1; - - info->scanline_x = x; - info->scanline_y = y; - /* Have to pad the width here and use clipping engine */ - info->scanline_w = (w + pad) & ~pad; - info->scanline_h = h; - - info->scanline_x1clip = x + skipleft; - info->scanline_x2clip = x + w; - - info->scanline_words = (w * info->scanline_bpp + 31) / 32; - info->scanline_hpass = min(h,(CP_BUFSIZE/info->scanline_words)); - - RADEONCPScanlinePacket(pScrn, 0); - -#endif -} - -/* Set up the clipping rectangle */ -static void -FUNC_NAME(RADEONSetClippingRectangle)(ScrnInfoPtr pScrn, - int xa, int ya, - int xb, int yb) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned long tmp1 = 0; - unsigned long tmp2 = 0; - ACCEL_PREAMBLE(); - - if (xa < 0) { - tmp1 = (-xa) & 0x3fff; - tmp1 |= RADEON_SC_SIGN_MASK_LO; - } else { - tmp1 = xa; - } - - if (ya < 0) { - tmp1 |= (((-ya) & 0x3fff) << 16); - tmp1 |= RADEON_SC_SIGN_MASK_HI; - } else { - tmp1 |= (ya << 16); - } - - xb++; yb++; - - if (xb < 0) { - tmp2 = (-xb) & 0x3fff; - tmp2 |= RADEON_SC_SIGN_MASK_LO; - } else { - tmp2 = xb; - } - - if (yb < 0) { - tmp2 |= (((-yb) & 0x3fff) << 16); - tmp2 |= RADEON_SC_SIGN_MASK_HI; - } else { - tmp2 |= (yb << 16); - } - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl_clip - | RADEON_GMC_DST_CLIPPING)); - OUT_ACCEL_REG(RADEON_SC_TOP_LEFT, tmp1); - OUT_ACCEL_REG(RADEON_SC_BOTTOM_RIGHT, tmp2); - - FINISH_ACCEL(); - - FUNC_NAME(RADEONSetTransparency)(pScrn, info->trans_color); -} - -/* Disable the clipping rectangle */ -static void -FUNC_NAME(RADEONDisableClipping)(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - BEGIN_ACCEL(3); - - OUT_ACCEL_REG(RADEON_DP_GUI_MASTER_CNTL, info->dp_gui_master_cntl_clip); - OUT_ACCEL_REG(RADEON_SC_TOP_LEFT, 0); - OUT_ACCEL_REG(RADEON_SC_BOTTOM_RIGHT, (RADEON_DEFAULT_SC_RIGHT_MAX | - RADEON_DEFAULT_SC_BOTTOM_MAX)); - - FINISH_ACCEL(); - - FUNC_NAME(RADEONSetTransparency)(pScrn, info->trans_color); -} - -#ifdef ACCEL_CP -/* Point the DST_PITCH_OFFSET register at the current buffer. This - * allows us to interact with the back and depth buffers. All CP 2D - * acceleration commands use the DST_PITCH_OFFSET register. - */ -void -RADEONSelectBuffer(ScrnInfoPtr pScrn, int buffer) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - ACCEL_PREAMBLE(); - - switch (buffer) { - case RADEON_BACK: - info->dst_pitch_offset = info->backPitchOffset; - break; - case RADEON_DEPTH: - info->dst_pitch_offset = info->depthPitchOffset; - break; - default: - case RADEON_FRONT: - info->dst_pitch_offset = info->frontPitchOffset; - break; - } - - BEGIN_ACCEL(1); - - OUT_ACCEL_REG(RADEON_DEFAULT_OFFSET, info->dst_pitch_offset); - - FINISH_ACCEL(); -} -#endif - -void -FUNC_NAME(RADEONAccelInit)(ScreenPtr pScreen, XAAInfoRecPtr a) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - RADEONInfoPtr info = RADEONPTR(pScrn); - - a->Flags = (PIXMAP_CACHE - | OFFSCREEN_PIXMAPS - | LINEAR_FRAMEBUFFER); - - /* Sync */ - a->Sync = FUNC_NAME(RADEONWaitForIdle); - - /* Solid Filled Rectangle */ - a->PolyFillRectSolidFlags = 0; - a->SetupForSolidFill - = FUNC_NAME(RADEONSetupForSolidFill); - a->SubsequentSolidFillRect - = FUNC_NAME(RADEONSubsequentSolidFillRect); - - /* Screen-to-screen Copy */ - a->ScreenToScreenCopyFlags = 0; - a->SetupForScreenToScreenCopy - = FUNC_NAME(RADEONSetupForScreenToScreenCopy); - a->SubsequentScreenToScreenCopy - = FUNC_NAME(RADEONSubsequentScreenToScreenCopy); - - /* Mono 8x8 Pattern Fill (Color Expand) */ - a->SetupForMono8x8PatternFill - = FUNC_NAME(RADEONSetupForMono8x8PatternFill); - a->SubsequentMono8x8PatternFillRect - = FUNC_NAME(RADEONSubsequentMono8x8PatternFillRect); - a->Mono8x8PatternFillFlags = (HARDWARE_PATTERN_PROGRAMMED_BITS - | HARDWARE_PATTERN_PROGRAMMED_ORIGIN - | HARDWARE_PATTERN_SCREEN_ORIGIN); - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - if (info->ChipFamily >= CHIP_FAMILY_RV200) - a->Mono8x8PatternFillFlags |= BIT_ORDER_IN_BYTE_MSBFIRST; - else - a->Mono8x8PatternFillFlags |= BIT_ORDER_IN_BYTE_LSBFIRST; -#else - a->Mono8x8PatternFillFlags |= BIT_ORDER_IN_BYTE_LSBFIRST; -#endif - - /* Indirect CPU-To-Screen Color Expand */ - - /* RADEON gets upset, when using HOST provided data without a source - rop. To show run 'xtest's drwarc. */ - a->ScanlineCPUToScreenColorExpandFillFlags - = (LEFT_EDGE_CLIPPING - | ROP_NEEDS_SOURCE - | LEFT_EDGE_CLIPPING_NEGATIVE_X); - a->NumScanlineColorExpandBuffers = 1; - a->ScanlineColorExpandBuffers = info->scratch_buffer; - if (!info->scratch_save) - info->scratch_save - = xalloc(((pScrn->virtualX+31)/32*4) - + (pScrn->virtualX * info->CurrentLayout.pixel_bytes)); - info->scratch_buffer[0] = info->scratch_save; - a->SetupForScanlineCPUToScreenColorExpandFill - = FUNC_NAME(RADEONSetupForScanlineCPUToScreenColorExpandFill); - a->SubsequentScanlineCPUToScreenColorExpandFill - = FUNC_NAME(RADEONSubsequentScanlineCPUToScreenColorExpandFill); - a->SubsequentColorExpandScanline = FUNC_NAME(RADEONSubsequentScanline); - - /* Solid Lines */ - a->SetupForSolidLine - = FUNC_NAME(RADEONSetupForSolidLine); - a->SubsequentSolidHorVertLine - = FUNC_NAME(RADEONSubsequentSolidHorVertLine); - -#ifdef XFree86LOADER - if (info->xaaReq.minorversion >= 1) { -#endif - - /* RADEON only supports 14 bits for lines and clipping and only - * draws lines that are completely on-screen correctly. This will - * cause display corruption problem in the cases when out-of-range - * commands are issued, like when dimming screen during GNOME logout - * in dual-head setup. Solid and dashed lines are therefore limited - * to the virtual screen. - */ - - a->SolidLineFlags = LINE_LIMIT_COORDS; - a->SolidLineLimits.x1 = 0; - a->SolidLineLimits.y1 = 0; - a->SolidLineLimits.x2 = pScrn->virtualX-1; - a->SolidLineLimits.y2 = pScrn->virtualY-1; - - /* Call miSetZeroLineBias() to have mi/mfb/cfb/fb routines match - hardware accel two point lines */ - miSetZeroLineBias(pScreen, (OCTANT5 | OCTANT6 | OCTANT7 | OCTANT8)); - - a->SubsequentSolidTwoPointLine - = FUNC_NAME(RADEONSubsequentSolidTwoPointLine); - - /* Disabled on RV200 and newer because it does not pass XTest */ - if (info->ChipFamily < CHIP_FAMILY_RV200) { - a->SetupForDashedLine - = FUNC_NAME(RADEONSetupForDashedLine); - a->SubsequentDashedTwoPointLine - = FUNC_NAME(RADEONSubsequentDashedTwoPointLine); - a->DashPatternMaxLength = 32; - /* ROP3 doesn't seem to work properly for dashedline with GXinvert */ - a->DashedLineFlags = (LINE_PATTERN_LSBFIRST_LSBJUSTIFIED - | LINE_PATTERN_POWER_OF_2_ONLY - | LINE_LIMIT_COORDS - | ROP_NEEDS_SOURCE); - a->DashedLineLimits.x1 = 0; - a->DashedLineLimits.y1 = 0; - a->DashedLineLimits.x2 = pScrn->virtualX-1; - a->DashedLineLimits.y2 = pScrn->virtualY-1; - } - -#ifdef XFree86LOADER - } else { - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "libxaa too old, can't accelerate TwoPoint lines\n"); - } -#endif - - /* Clipping, note that without this, all line accelerations will - * not be called - */ - a->SetClippingRectangle - = FUNC_NAME(RADEONSetClippingRectangle); - a->DisableClipping - = FUNC_NAME(RADEONDisableClipping); - a->ClippingFlags - = (HARDWARE_CLIP_SOLID_LINE - | HARDWARE_CLIP_DASHED_LINE - /* | HARDWARE_CLIP_SOLID_FILL -- seems very slow with this on */ - | HARDWARE_CLIP_MONO_8x8_FILL - | HARDWARE_CLIP_SCREEN_TO_SCREEN_COPY); - - if (xf86IsEntityShared(info->pEnt->index)) { - DevUnion *pPriv; - RADEONEntPtr pRADEONEnt; - - pPriv = xf86GetEntityPrivate(info->pEnt->index, gRADEONEntityIndex); - pRADEONEnt = pPriv->ptr; - - /* If there are more than one devices sharing this entity, we - * have to assign this call back, otherwise the XAA will be - * disabled - */ - if (xf86GetNumEntityInstances(info->pEnt->index) > 1) - a->RestoreAccelState = FUNC_NAME(RADEONRestoreAccelState); - } - - /* ImageWrite */ - a->NumScanlineImageWriteBuffers = 1; - a->ScanlineImageWriteBuffers = info->scratch_buffer; - a->SetupForScanlineImageWrite - = FUNC_NAME(RADEONSetupForScanlineImageWrite); - a->SubsequentScanlineImageWriteRect - = FUNC_NAME(RADEONSubsequentScanlineImageWriteRect); - a->SubsequentImageWriteScanline = FUNC_NAME(RADEONSubsequentScanline); - a->ScanlineImageWriteFlags = (CPU_TRANSFER_PAD_DWORD -#ifdef ACCEL_MMIO - /* Performance tests show that we shouldn't use GXcopy - * for uploads as a memcpy is faster - */ - | NO_GXCOPY -#endif - /* RADEON gets upset, when using HOST provided data - * without a source rop. To show run 'xtest's ptimg - */ - | ROP_NEEDS_SOURCE - | SCANLINE_PAD_DWORD - | LEFT_EDGE_CLIPPING - | LEFT_EDGE_CLIPPING_NEGATIVE_X); - -#if 0 - /* Color 8x8 Pattern Fill */ - a->SetupForColor8x8PatternFill - = FUNC_NAME(RADEONSetupForColor8x8PatternFill); - a->SubsequentColor8x8PatternFillRect - = FUNC_NAME(RADEONSubsequentColor8x8PatternFillRect); - a->Color8x8PatternFillFlags = (HARDWARE_PATTERN_PROGRAMMED_ORIGIN - | HARDWARE_PATTERN_SCREEN_ORIGIN - | BIT_ORDER_IN_BYTE_LSBFIRST); -#endif -} - -#undef FUNC_NAME diff --git a/src/radeon_common.h b/src/radeon_common.h deleted file mode 100644 index bf118639..00000000 --- a/src/radeon_common.h +++ /dev/null @@ -1,473 +0,0 @@ -/* radeon_common.h -- common header definitions for Radeon 2D/3D/DRM suite - * - * Copyright 2000 VA Linux Systems, Inc., Fremont, California. - * Copyright 2002 Tungsten Graphics, Inc., Cedar Park, Texas. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Author: - * Gareth Hughes <gareth@valinux.com> - * Kevin E. Martin <martin@valinux.com> - * Keith Whitwell <keith@tungstengraphics.com> - * - * Converted to common header format: - * Jens Owen <jens@tungstengraphics.com> - * - * $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_common.h,v 1.2 2003/04/07 01:22:09 martin Exp $ - * - */ - -#ifndef _RADEON_COMMON_H_ -#define _RADEON_COMMON_H_ - -#include <inttypes.h> -#include "xf86drm.h" - -/* WARNING: If you change any of these defines, make sure to change - * the kernel include file as well (radeon_drm.h) - */ - -/* Driver specific DRM command indices - * NOTE: these are not OS specific, but they are driver specific - */ -#define DRM_RADEON_CP_INIT 0x00 -#define DRM_RADEON_CP_START 0x01 -#define DRM_RADEON_CP_STOP 0x02 -#define DRM_RADEON_CP_RESET 0x03 -#define DRM_RADEON_CP_IDLE 0x04 -#define DRM_RADEON_RESET 0x05 -#define DRM_RADEON_FULLSCREEN 0x06 -#define DRM_RADEON_SWAP 0x07 -#define DRM_RADEON_CLEAR 0x08 -#define DRM_RADEON_VERTEX 0x09 -#define DRM_RADEON_INDICES 0x0a -#define DRM_RADEON_STIPPLE 0x0c -#define DRM_RADEON_INDIRECT 0x0d -#define DRM_RADEON_TEXTURE 0x0e -#define DRM_RADEON_VERTEX2 0x0f -#define DRM_RADEON_CMDBUF 0x10 -#define DRM_RADEON_GETPARAM 0x11 -#define DRM_RADEON_FLIP 0x12 -#define DRM_RADEON_ALLOC 0x13 -#define DRM_RADEON_FREE 0x14 -#define DRM_RADEON_INIT_HEAP 0x15 -#define DRM_RADEON_IRQ_EMIT 0x16 -#define DRM_RADEON_IRQ_WAIT 0x17 -#define DRM_RADEON_CP_RESUME 0x18 -#define DRM_RADEON_SETPARAM 0x19 -#define DRM_RADEON_MAX_DRM_COMMAND_INDEX 0x39 - - -#define RADEON_FRONT 0x1 -#define RADEON_BACK 0x2 -#define RADEON_DEPTH 0x4 -#define RADEON_STENCIL 0x8 - -#define RADEON_CLEAR_X1 0 -#define RADEON_CLEAR_Y1 1 -#define RADEON_CLEAR_X2 2 -#define RADEON_CLEAR_Y2 3 -#define RADEON_CLEAR_DEPTH 4 - - -typedef struct { - enum { - DRM_RADEON_INIT_CP = 0x01, - DRM_RADEON_CLEANUP_CP = 0x02, - DRM_RADEON_INIT_R200_CP = 0x03 - } func; - unsigned long sarea_priv_offset; - int is_pci; - int cp_mode; - int gart_size; - int ring_size; - int usec_timeout; - - unsigned int fb_bpp; - unsigned int front_offset, front_pitch; - unsigned int back_offset, back_pitch; - unsigned int depth_bpp; - unsigned int depth_offset, depth_pitch; - - unsigned long fb_offset; - unsigned long mmio_offset; - unsigned long ring_offset; - unsigned long ring_rptr_offset; - unsigned long buffers_offset; - unsigned long gart_textures_offset; -} drmRadeonInit; - -typedef struct { - int flush; - int idle; -} drmRadeonCPStop; - -typedef struct { - int idx; - int start; - int end; - int discard; -} drmRadeonIndirect; - -typedef union drmRadeonClearR { - float f[5]; - unsigned int ui[5]; -} drmRadeonClearRect; - -typedef struct drmRadeonClearT { - unsigned int flags; - unsigned int clear_color; - unsigned int clear_depth; - unsigned int color_mask; - unsigned int depth_mask; /* misnamed field: should be stencil */ - drmRadeonClearRect *depth_boxes; -} drmRadeonClearType; - -typedef struct drmRadeonFullscreenT { - enum { - RADEON_INIT_FULLSCREEN = 0x01, - RADEON_CLEANUP_FULLSCREEN = 0x02 - } func; -} drmRadeonFullscreenType; - -typedef struct { - unsigned int *mask; -} drmRadeonStipple; - -typedef struct { - unsigned int x; - unsigned int y; - unsigned int width; - unsigned int height; - const void *data; -} drmRadeonTexImage; - -typedef struct { - unsigned int offset; - int pitch; - int format; - int width; /* Texture image coordinates */ - int height; - drmRadeonTexImage *image; -} drmRadeonTexture; - - -#define RADEON_MAX_TEXTURE_UNITS 3 - -/* Layout matches drm_radeon_state_t in linux drm_radeon.h. - */ -typedef struct { - struct { - unsigned int pp_misc; /* 0x1c14 */ - unsigned int pp_fog_color; - unsigned int re_solid_color; - unsigned int rb3d_blendcntl; - unsigned int rb3d_depthoffset; - unsigned int rb3d_depthpitch; - unsigned int rb3d_zstencilcntl; - unsigned int pp_cntl; /* 0x1c38 */ - unsigned int rb3d_cntl; - unsigned int rb3d_coloroffset; - unsigned int re_width_height; - unsigned int rb3d_colorpitch; - } context; - struct { - unsigned int se_cntl; - } setup1; - struct { - unsigned int se_coord_fmt; /* 0x1c50 */ - } vertex; - struct { - unsigned int re_line_pattern; /* 0x1cd0 */ - unsigned int re_line_state; - unsigned int se_line_width; /* 0x1db8 */ - } line; - struct { - unsigned int pp_lum_matrix; /* 0x1d00 */ - unsigned int pp_rot_matrix_0; /* 0x1d58 */ - unsigned int pp_rot_matrix_1; - } bumpmap; - struct { - unsigned int rb3d_stencilrefmask; /* 0x1d7c */ - unsigned int rb3d_ropcntl; - unsigned int rb3d_planemask; - } mask; - struct { - unsigned int se_vport_xscale; /* 0x1d98 */ - unsigned int se_vport_xoffset; - unsigned int se_vport_yscale; - unsigned int se_vport_yoffset; - unsigned int se_vport_zscale; - unsigned int se_vport_zoffset; - } viewport; - struct { - unsigned int se_cntl_status; /* 0x2140 */ - } setup2; - struct { - unsigned int re_top_left; /*ignored*/ /* 0x26c0 */ - unsigned int re_misc; - } misc; - struct { - unsigned int pp_txfilter; - unsigned int pp_txformat; - unsigned int pp_txoffset; - unsigned int pp_txcblend; - unsigned int pp_txablend; - unsigned int pp_tfactor; - unsigned int pp_border_color; - } texture[RADEON_MAX_TEXTURE_UNITS]; - struct { - unsigned int se_zbias_factor; - unsigned int se_zbias_constant; - } zbias; - unsigned int dirty; -} drmRadeonState; - -/* 1.1 vertex ioctl. Used in compatibility modes. - */ -typedef struct { - int prim; - int idx; /* Index of vertex buffer */ - int count; /* Number of vertices in buffer */ - int discard; /* Client finished with buffer? */ -} drmRadeonVertex; - -typedef struct { - unsigned int start; - unsigned int finish; - unsigned int prim:8; - unsigned int stateidx:8; - unsigned int numverts:16; /* overloaded as offset/64 for elt prims */ - unsigned int vc_format; -} drmRadeonPrim; - -typedef struct { - int idx; /* Index of vertex buffer */ - int discard; /* Client finished with buffer? */ - int nr_states; - drmRadeonState *state; - int nr_prims; - drmRadeonPrim *prim; -} drmRadeonVertex2; - -#define RADEON_MAX_STATES 16 -#define RADEON_MAX_PRIMS 64 - -/* Command buffer. Replace with true dma stream? - */ -typedef struct { - int bufsz; - char *buf; - int nbox; - drm_clip_rect_t *boxes; -} drmRadeonCmdBuffer; - -/* New style per-packet identifiers for use in cmd_buffer ioctl with - * the RADEON_EMIT_PACKET command. Comments relate new packets to old - * state bits and the packet size: - */ -#define RADEON_EMIT_PP_MISC 0 /* context/7 */ -#define RADEON_EMIT_PP_CNTL 1 /* context/3 */ -#define RADEON_EMIT_RB3D_COLORPITCH 2 /* context/1 */ -#define RADEON_EMIT_RE_LINE_PATTERN 3 /* line/2 */ -#define RADEON_EMIT_SE_LINE_WIDTH 4 /* line/1 */ -#define RADEON_EMIT_PP_LUM_MATRIX 5 /* bumpmap/1 */ -#define RADEON_EMIT_PP_ROT_MATRIX_0 6 /* bumpmap/2 */ -#define RADEON_EMIT_RB3D_STENCILREFMASK 7 /* masks/3 */ -#define RADEON_EMIT_SE_VPORT_XSCALE 8 /* viewport/6 */ -#define RADEON_EMIT_SE_CNTL 9 /* setup/2 */ -#define RADEON_EMIT_SE_CNTL_STATUS 10 /* setup/1 */ -#define RADEON_EMIT_RE_MISC 11 /* misc/1 */ -#define RADEON_EMIT_PP_TXFILTER_0 12 /* tex0/6 */ -#define RADEON_EMIT_PP_BORDER_COLOR_0 13 /* tex0/1 */ -#define RADEON_EMIT_PP_TXFILTER_1 14 /* tex1/6 */ -#define RADEON_EMIT_PP_BORDER_COLOR_1 15 /* tex1/1 */ -#define RADEON_EMIT_PP_TXFILTER_2 16 /* tex2/6 */ -#define RADEON_EMIT_PP_BORDER_COLOR_2 17 /* tex2/1 */ -#define RADEON_EMIT_SE_ZBIAS_FACTOR 18 /* zbias/2 */ -#define RADEON_EMIT_SE_TCL_OUTPUT_VTX_FMT 19 /* tcl/11 */ -#define RADEON_EMIT_SE_TCL_MATERIAL_EMMISSIVE_RED 20 /* material/17 */ -#define R200_EMIT_PP_TXCBLEND_0 21 /* tex0/4 */ -#define R200_EMIT_PP_TXCBLEND_1 22 /* tex1/4 */ -#define R200_EMIT_PP_TXCBLEND_2 23 /* tex2/4 */ -#define R200_EMIT_PP_TXCBLEND_3 24 /* tex3/4 */ -#define R200_EMIT_PP_TXCBLEND_4 25 /* tex4/4 */ -#define R200_EMIT_PP_TXCBLEND_5 26 /* tex5/4 */ -#define R200_EMIT_PP_TXCBLEND_6 27 /* /4 */ -#define R200_EMIT_PP_TXCBLEND_7 28 /* /4 */ -#define R200_EMIT_TCL_LIGHT_MODEL_CTL_0 29 /* tcl/6 */ -#define R200_EMIT_TFACTOR_0 30 /* tf/6 */ -#define R200_EMIT_VTX_FMT_0 31 /* vtx/4 */ -#define R200_EMIT_VAP_CTL 32 /* vap/1 */ -#define R200_EMIT_MATRIX_SELECT_0 33 /* msl/5 */ -#define R200_EMIT_TEX_PROC_CTL_2 34 /* tcg/5 */ -#define R200_EMIT_TCL_UCP_VERT_BLEND_CTL 35 /* tcl/1 */ -#define R200_EMIT_PP_TXFILTER_0 36 /* tex0/6 */ -#define R200_EMIT_PP_TXFILTER_1 37 /* tex1/6 */ -#define R200_EMIT_PP_TXFILTER_2 38 /* tex2/6 */ -#define R200_EMIT_PP_TXFILTER_3 39 /* tex3/6 */ -#define R200_EMIT_PP_TXFILTER_4 40 /* tex4/6 */ -#define R200_EMIT_PP_TXFILTER_5 41 /* tex5/6 */ -#define R200_EMIT_PP_TXOFFSET_0 42 /* tex0/1 */ -#define R200_EMIT_PP_TXOFFSET_1 43 /* tex1/1 */ -#define R200_EMIT_PP_TXOFFSET_2 44 /* tex2/1 */ -#define R200_EMIT_PP_TXOFFSET_3 45 /* tex3/1 */ -#define R200_EMIT_PP_TXOFFSET_4 46 /* tex4/1 */ -#define R200_EMIT_PP_TXOFFSET_5 47 /* tex5/1 */ -#define R200_EMIT_VTE_CNTL 48 /* vte/1 */ -#define R200_EMIT_OUTPUT_VTX_COMP_SEL 49 /* vtx/1 */ -#define R200_EMIT_PP_TAM_DEBUG3 50 /* tam/1 */ -#define R200_EMIT_PP_CNTL_X 51 /* cst/1 */ -#define R200_EMIT_RB3D_DEPTHXY_OFFSET 52 /* cst/1 */ -#define R200_EMIT_RE_AUX_SCISSOR_CNTL 53 /* cst/1 */ -#define R200_EMIT_RE_SCISSOR_TL_0 54 /* cst/2 */ -#define R200_EMIT_RE_SCISSOR_TL_1 55 /* cst/2 */ -#define R200_EMIT_RE_SCISSOR_TL_2 56 /* cst/2 */ -#define R200_EMIT_SE_VAP_CNTL_STATUS 57 /* cst/1 */ -#define R200_EMIT_SE_VTX_STATE_CNTL 58 /* cst/1 */ -#define R200_EMIT_RE_POINTSIZE 59 /* cst/1 */ -#define R200_EMIT_TCL_INPUT_VTX_VECTOR_ADDR_0 60 /* cst/4 */ -#define R200_EMIT_PP_CUBIC_FACES_0 61 -#define R200_EMIT_PP_CUBIC_OFFSETS_0 62 -#define R200_EMIT_PP_CUBIC_FACES_1 63 -#define R200_EMIT_PP_CUBIC_OFFSETS_1 64 -#define R200_EMIT_PP_CUBIC_FACES_2 65 -#define R200_EMIT_PP_CUBIC_OFFSETS_2 66 -#define R200_EMIT_PP_CUBIC_FACES_3 67 -#define R200_EMIT_PP_CUBIC_OFFSETS_3 68 -#define R200_EMIT_PP_CUBIC_FACES_4 69 -#define R200_EMIT_PP_CUBIC_OFFSETS_4 70 -#define R200_EMIT_PP_CUBIC_FACES_5 71 -#define R200_EMIT_PP_CUBIC_OFFSETS_5 72 -#define RADEON_EMIT_PP_TEX_SIZE_0 73 -#define RADEON_EMIT_PP_TEX_SIZE_1 74 -#define RADEON_EMIT_PP_TEX_SIZE_2 75 -#define R200_EMIT_RB3D_BLENDCOLOR 76 -#define RADEON_MAX_STATE_PACKETS 77 - - -/* Commands understood by cmd_buffer ioctl. More can be added but - * obviously these can't be removed or changed: - */ -#define RADEON_CMD_PACKET 1 /* emit one of the register packets above */ -#define RADEON_CMD_SCALARS 2 /* emit scalar data */ -#define RADEON_CMD_VECTORS 3 /* emit vector data */ -#define RADEON_CMD_DMA_DISCARD 4 /* discard current dma buf */ -#define RADEON_CMD_PACKET3 5 /* emit hw packet */ -#define RADEON_CMD_PACKET3_CLIP 6 /* emit hw packet wrapped in cliprects */ -#define RADEON_CMD_SCALARS2 7 /* R200 stopgap */ -#define RADEON_CMD_WAIT 8 /* synchronization */ - -typedef union { - int i; - struct { - unsigned char cmd_type, pad0, pad1, pad2; - } header; - struct { - unsigned char cmd_type, packet_id, pad0, pad1; - } packet; - struct { - unsigned char cmd_type, offset, stride, count; - } scalars; - struct { - unsigned char cmd_type, offset, stride, count; - } vectors; - struct { - unsigned char cmd_type, buf_idx, pad0, pad1; - } dma; - struct { - unsigned char cmd_type, flags, pad0, pad1; - } wait; -} drmRadeonCmdHeader; - - -#define RADEON_WAIT_2D 0x1 -#define RADEON_WAIT_3D 0x2 - - -/* 1.3: An ioctl to get parameters that aren't available to the 3d - * client any other way. - */ -#define RADEON_PARAM_GART_BUFFER_OFFSET 1 /* card offset of 1st GART buffer */ -#define RADEON_PARAM_LAST_FRAME 2 -#define RADEON_PARAM_LAST_DISPATCH 3 -#define RADEON_PARAM_LAST_CLEAR 4 -/* Added with DRM version 1.6. */ -#define RADEON_PARAM_IRQ_NR 5 -#define RADEON_PARAM_GART_BASE 6 /* card offset of GART base */ -/* Added with DRM version 1.8. */ -#define RADEON_PARAM_REGISTER_HANDLE 7 /* for drmMap() */ -#define RADEON_PARAM_STATUS_HANDLE 8 -#define RADEON_PARAM_SAREA_HANDLE 9 -#define RADEON_PARAM_GART_TEX_HANDLE 10 -#define RADEON_PARAM_SCRATCH_OFFSET 11 - -typedef struct drm_radeon_getparam { - int param; - int *value; -} drmRadeonGetParam; - - -#define RADEON_MEM_REGION_GART 1 -#define RADEON_MEM_REGION_FB 2 - -typedef struct drm_radeon_mem_alloc { - int region; - int alignment; - int size; - int *region_offset; /* offset from start of fb or GART */ -} drmRadeonMemAlloc; - -typedef struct drm_radeon_mem_free { - int region; - int region_offset; -} drmRadeonMemFree; - -typedef struct drm_radeon_mem_init_heap { - int region; - int size; - int start; -} drmRadeonMemInitHeap; - -/* 1.6: Userspace can request & wait on irq's: - */ -typedef struct drm_radeon_irq_emit { - int *irq_seq; -} drmRadeonIrqEmit; - -typedef struct drm_radeon_irq_wait { - int irq_seq; -} drmRadeonIrqWait; - - -/* 1.10: Clients tell the DRM where they think the framebuffer is located in - * the card's address space, via a new generic ioctl to set parameters - */ - -typedef struct drm_radeon_set_param { - unsigned int param; - int64_t value; -} drmRadeonSetParam; - -#define RADEON_SETPARAM_FB_LOCATION 1 - - -#endif diff --git a/src/radeon_cursor.c b/src/radeon_cursor.c deleted file mode 100644 index fe0d12bd..00000000 --- a/src/radeon_cursor.c +++ /dev/null @@ -1,423 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_cursor.c,v 1.25 2003/08/29 21:07:57 tsi Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * Rickard E. Faith <faith@valinux.com> - * - * References: - * - * !!!! FIXME !!!! - * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical - * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April - * 1999. - * - * RAGE 128 Software Development Manual (Technical Reference Manual P/N - * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. - * - */ - - /* Driver data structures */ -#include "radeon.h" -#include "radeon_macros.h" -#include "radeon_reg.h" -#include "radeon_mergedfb.h" - - /* X and server generic header files */ -#include "xf86.h" - -/* Mono ARGB cursor colours (premultiplied). */ -static CARD32 mono_cursor_color[] = { - 0x00000000, /* White, fully transparent. */ - 0x00000000, /* Black, fully transparent. */ - 0xffffffff, /* White, fully opaque. */ - 0xff000000, /* Black, fully opaque. */ -}; - -#define CURSOR_WIDTH 64 -#define CURSOR_HEIGHT 64 - -/* - * The cursor bits are always 32bpp. On MSBFirst buses, - * configure byte swapping to swap 32 bit units when writing - * the cursor image. Byte swapping must always be returned - * to its previous value before returning. - */ -#if X_BYTE_ORDER == X_BIG_ENDIAN - -#define CURSOR_SWAPPING_DECL_MMIO unsigned char *RADEONMMIO = info->MMIO; -#define CURSOR_SWAPPING_DECL CARD32 __surface_cntl; -#define CURSOR_SWAPPING_START() \ - OUTREG(RADEON_SURFACE_CNTL, \ - ((__surface_cntl = INREG(RADEON_SURFACE_CNTL)) | \ - RADEON_NONSURF_AP0_SWP_32BPP) & \ - ~RADEON_NONSURF_AP0_SWP_16BPP) -#define CURSOR_SWAPPING_END() (OUTREG(RADEON_SURFACE_CNTL, __surface_cntl)) - -#else - -#define CURSOR_SWAPPING_DECL_MMIO -#define CURSOR_SWAPPING_DECL -#define CURSOR_SWAPPING_START() -#define CURSOR_SWAPPING_END() - -#endif - - -/* Set cursor foreground and background colors */ -static void RADEONSetCursorColors(ScrnInfoPtr pScrn, int bg, int fg) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - CARD32 *pixels = (CARD32 *)(pointer)(info->FB + info->cursor_start); - int pixel, i; - CURSOR_SWAPPING_DECL_MMIO - CURSOR_SWAPPING_DECL - -#ifdef ARGB_CURSOR - /* Don't recolour cursors set with SetCursorARGB. */ - if (info->cursor_argb) - return; -#endif - - fg |= 0xff000000; - bg |= 0xff000000; - - /* Don't recolour the image if we don't have to. */ - if (fg == info->cursor_fg && bg == info->cursor_bg) - return; - - CURSOR_SWAPPING_START(); - - /* Note: We assume that the pixels are either fully opaque or fully - * transparent, so we won't premultiply them, and we can just - * check for non-zero pixel values; those are either fg or bg - */ - for (i = 0; i < CURSOR_WIDTH * CURSOR_HEIGHT; i++, pixels++) - if ((pixel = *pixels)) - *pixels = (pixel == info->cursor_fg) ? fg : bg; - - CURSOR_SWAPPING_END(); - info->cursor_fg = fg; - info->cursor_bg = bg; -} - - -/* Set cursor position to (x,y) with offset into cursor bitmap at - * (xorigin,yorigin) - */ -static void RADEONSetCursorPosition(ScrnInfoPtr pScrn, int x, int y) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - xf86CursorInfoPtr cursor = info->cursor; - int xorigin = 0; - int yorigin = 0; - int total_y = pScrn->frameY1 - pScrn->frameY0; - int stride = 256; - - if(info->MergedFB) { - RADEONSetCursorPositionMerged(pScrn, x, y); - return; - } - - if (x < 0) xorigin = -x+1; - if (y < 0) yorigin = -y+1; - if (y > total_y) y = total_y; - if (info->Flags & V_DBLSCAN) y *= 2; - if (xorigin >= cursor->MaxWidth) xorigin = cursor->MaxWidth - 1; - if (yorigin >= cursor->MaxHeight) yorigin = cursor->MaxHeight - 1; - - if (!info->IsSecondary) { - OUTREG(RADEON_CUR_HORZ_VERT_OFF, (RADEON_CUR_LOCK - | (xorigin << 16) - | yorigin)); - OUTREG(RADEON_CUR_HORZ_VERT_POSN, (RADEON_CUR_LOCK - | ((xorigin ? 0 : x) << 16) - | (yorigin ? 0 : y))); - OUTREG(RADEON_CUR_OFFSET, info->cursor_start + yorigin * stride); - } else { - OUTREG(RADEON_CUR2_HORZ_VERT_OFF, (RADEON_CUR2_LOCK - | (xorigin << 16) - | yorigin)); - OUTREG(RADEON_CUR2_HORZ_VERT_POSN, (RADEON_CUR2_LOCK - | ((xorigin ? 0 : x) << 16) - | (yorigin ? 0 : y))); - OUTREG(RADEON_CUR2_OFFSET, - info->cursor_start + pScrn->fbOffset + yorigin * stride); - } - -} - -/* Copy cursor image from `image' to video memory. RADEONSetCursorPosition - * will be called after this, so we can ignore xorigin and yorigin. - */ -static void RADEONLoadCursorImage(ScrnInfoPtr pScrn, unsigned char *image) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - CARD8 *s = (CARD8 *)(pointer)image; - CARD32 *d = (CARD32 *)(pointer)(info->FB + info->cursor_start); - CARD32 save1 = 0; - CARD32 save2 = 0; - CARD8 chunk; - CARD32 i, j; - CURSOR_SWAPPING_DECL - - if (!info->IsSecondary) { - save1 = INREG(RADEON_CRTC_GEN_CNTL) & ~(CARD32) (3 << 20); - save1 |= (CARD32) (2 << 20); - OUTREG(RADEON_CRTC_GEN_CNTL, save1 & (CARD32)~RADEON_CRTC_CUR_EN); - } - - if (info->IsSecondary || info->MergedFB) { - save2 = INREG(RADEON_CRTC2_GEN_CNTL) & ~(CARD32) (3 << 20); - save2 |= (CARD32) (2 << 20); - OUTREG(RADEON_CRTC2_GEN_CNTL, save2 & (CARD32)~RADEON_CRTC2_CUR_EN); - } - -#ifdef ARGB_CURSOR - info->cursor_argb = FALSE; -#endif - - /* - * Convert the bitmap to ARGB32. - * - * HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_1 always places - * source in the low bit of the pair and mask in the high bit, - * and MSBFirst machines set HARDWARE_CURSOR_BIT_ORDER_MSBFIRST - * (which actually bit swaps the image) to make the bits LSBFirst - */ - CURSOR_SWAPPING_START(); -#define ARGB_PER_CHUNK (8 * sizeof (chunk) / 2) - for (i = 0; i < CURSOR_WIDTH * CURSOR_HEIGHT / ARGB_PER_CHUNK; i++) { - chunk = *s++; - for (j = 0; j < ARGB_PER_CHUNK; j++, chunk >>= 2) - *d++ = mono_cursor_color[chunk & 3]; - } - CURSOR_SWAPPING_END(); - - info->cursor_bg = mono_cursor_color[2]; - info->cursor_fg = mono_cursor_color[3]; - - if (!info->IsSecondary) - OUTREG(RADEON_CRTC_GEN_CNTL, save1); - - if (info->IsSecondary || info->MergedFB) - OUTREG(RADEON_CRTC2_GEN_CNTL, save2); - -} - -/* Hide hardware cursor. */ -static void RADEONHideCursor(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - - if (info->IsSecondary || info->MergedFB) - OUTREGP(RADEON_CRTC2_GEN_CNTL, 0, ~RADEON_CRTC2_CUR_EN); - - if (!info->IsSecondary) - OUTREGP(RADEON_CRTC_GEN_CNTL, 0, ~RADEON_CRTC_CUR_EN); -} - -/* Show hardware cursor. */ -static void RADEONShowCursor(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - - if (info->IsSecondary || info->MergedFB) - OUTREGP(RADEON_CRTC2_GEN_CNTL, RADEON_CRTC2_CUR_EN, - ~RADEON_CRTC2_CUR_EN); - - if (!info->IsSecondary) - OUTREGP(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_CUR_EN, - ~RADEON_CRTC_CUR_EN); -} - -/* Determine if hardware cursor is in use. */ -static Bool RADEONUseHWCursor(ScreenPtr pScreen, CursorPtr pCurs) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - RADEONInfoPtr info = RADEONPTR(pScrn); - - return info->cursor_start ? TRUE : FALSE; -} - -#ifdef ARGB_CURSOR -#include "cursorstr.h" - -static Bool RADEONUseHWCursorARGB (ScreenPtr pScreen, CursorPtr pCurs) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - RADEONInfoPtr info = RADEONPTR(pScrn); - - if (info->cursor_start && - pCurs->bits->height <= CURSOR_HEIGHT && pCurs->bits->width <= CURSOR_WIDTH) - return TRUE; - return FALSE; -} - -static void RADEONLoadCursorARGB (ScrnInfoPtr pScrn, CursorPtr pCurs) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - CARD32 *d = (CARD32 *)(pointer)(info->FB + info->cursor_start); - int x, y, w, h; - CARD32 save1 = 0; - CARD32 save2 = 0; - CARD32 *image = pCurs->bits->argb; - CARD32 *i; - CURSOR_SWAPPING_DECL - - if (!image) - return; /* XXX can't happen */ - - if (!info->IsSecondary) { - save1 = INREG(RADEON_CRTC_GEN_CNTL) & ~(CARD32) (3 << 20); - save1 |= (CARD32) (2 << 20); - OUTREG(RADEON_CRTC_GEN_CNTL, save1 & (CARD32)~RADEON_CRTC_CUR_EN); - } - - if (info->IsSecondary || info->MergedFB) { - save2 = INREG(RADEON_CRTC2_GEN_CNTL) & ~(CARD32) (3 << 20); - save2 |= (CARD32) (2 << 20); - OUTREG(RADEON_CRTC2_GEN_CNTL, save2 & (CARD32)~RADEON_CRTC2_CUR_EN); - } - -#ifdef ARGB_CURSOR - info->cursor_argb = TRUE; -#endif - - CURSOR_SWAPPING_START(); - - w = pCurs->bits->width; - if (w > CURSOR_WIDTH) - w = CURSOR_WIDTH; - h = pCurs->bits->height; - if (h > CURSOR_HEIGHT) - h = CURSOR_HEIGHT; - for (y = 0; y < h; y++) - { - i = image; - image += pCurs->bits->width; - for (x = 0; x < w; x++) - *d++ = *i++; - /* pad to the right with transparent */ - for (; x < CURSOR_WIDTH; x++) - *d++ = 0; - } - /* pad below with transparent */ - for (; y < CURSOR_HEIGHT; y++) - for (x = 0; x < CURSOR_WIDTH; x++) - *d++ = 0; - - CURSOR_SWAPPING_END (); - - if (!info->IsSecondary) - OUTREG(RADEON_CRTC_GEN_CNTL, save1); - - if (info->IsSecondary || info->MergedFB) - OUTREG(RADEON_CRTC2_GEN_CNTL, save2); - -} - -#endif - - -/* Initialize hardware cursor support. */ -Bool RADEONCursorInit(ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - RADEONInfoPtr info = RADEONPTR(pScrn); - xf86CursorInfoPtr cursor; - FBAreaPtr fbarea; - int width; - int width_bytes; - int height; - int size_bytes; - - if (!(cursor = info->cursor = xf86CreateCursorInfoRec())) return FALSE; - - cursor->MaxWidth = CURSOR_WIDTH; - cursor->MaxHeight = CURSOR_HEIGHT; - cursor->Flags = (HARDWARE_CURSOR_TRUECOLOR_AT_8BPP - | HARDWARE_CURSOR_AND_SOURCE_WITH_MASK -#if X_BYTE_ORDER == X_BIG_ENDIAN - /* this is a lie -- - * HARDWARE_CURSOR_BIT_ORDER_MSBFIRST - * actually inverts the bit order, so - * this switches to LSBFIRST - */ - | HARDWARE_CURSOR_BIT_ORDER_MSBFIRST -#endif - | HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_1); - - cursor->SetCursorColors = RADEONSetCursorColors; - cursor->SetCursorPosition = RADEONSetCursorPosition; - cursor->LoadCursorImage = RADEONLoadCursorImage; - cursor->HideCursor = RADEONHideCursor; - cursor->ShowCursor = RADEONShowCursor; - cursor->UseHWCursor = RADEONUseHWCursor; - -#ifdef ARGB_CURSOR - cursor->UseHWCursorARGB = RADEONUseHWCursorARGB; - cursor->LoadCursorARGB = RADEONLoadCursorARGB; -#endif - size_bytes = CURSOR_WIDTH * 4 * CURSOR_HEIGHT; - width = pScrn->displayWidth; - width_bytes = width * (pScrn->bitsPerPixel / 8); - height = (size_bytes + width_bytes - 1) / width_bytes; - fbarea = xf86AllocateOffscreenArea(pScreen, - width, - height, - 256, - NULL, - NULL, - NULL); - - if (!fbarea) { - info->cursor_start = 0; - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Hardware cursor disabled" - " due to insufficient offscreen memory\n"); - } else { - info->cursor_start = RADEON_ALIGN((fbarea->box.x1 + - fbarea->box.y1 * width) * - info->CurrentLayout.pixel_bytes, - 256); - info->cursor_end = info->cursor_start + size_bytes; - } - - RADEONTRACE(("RADEONCursorInit (0x%08x-0x%08x)\n", - info->cursor_start, info->cursor_end)); - - return xf86InitCursor(pScreen, cursor); -} diff --git a/src/radeon_dga.c b/src/radeon_dga.c deleted file mode 100644 index a0fe9389..00000000 --- a/src/radeon_dga.c +++ /dev/null @@ -1,397 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_dga.c,v 1.11 2002/09/18 18:14:58 martin Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * - * Credits: - * - * Thanks to Ove Kåven <ovek@transgaming.com> for writing the Rage 128 - * DGA support. Portions of this file are based on the initialization - * code for that driver. - * - */ - - /* Driver data structures */ -#include "radeon.h" -#include "radeon_probe.h" - - /* X and server generic header files */ -#include "xf86.h" - - /* DGA support */ -#include "dgaproc.h" - - -static Bool RADEON_OpenFramebuffer(ScrnInfoPtr, char **, unsigned char **, - int *, int *, int *); -static Bool RADEON_SetMode(ScrnInfoPtr, DGAModePtr); -static int RADEON_GetViewport(ScrnInfoPtr); -static void RADEON_SetViewport(ScrnInfoPtr, int, int, int); -static void RADEON_FillRect(ScrnInfoPtr, int, int, int, int, unsigned long); -static void RADEON_BlitRect(ScrnInfoPtr, int, int, int, int, int, int); -static void RADEON_BlitTransRect(ScrnInfoPtr, int, int, int, int, int, int, - unsigned long); - - -static DGAModePtr RADEONSetupDGAMode(ScrnInfoPtr pScrn, - DGAModePtr modes, - int *num, - int bitsPerPixel, - int depth, - Bool pixmap, - int secondPitch, - unsigned long red, - unsigned long green, - unsigned long blue, - short visualClass) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - DGAModePtr newmodes = NULL; - DGAModePtr currentMode; - DisplayModePtr pMode; - DisplayModePtr firstMode; - unsigned int size; - int pitch; - int Bpp = bitsPerPixel >> 3; - -SECOND_PASS: - - pMode = firstMode = pScrn->modes; - - while (1) { - pitch = pScrn->displayWidth; - size = pitch * Bpp * pMode->VDisplay; - - if ((!secondPitch || (pitch != secondPitch)) && - (size <= info->FbMapSize)) { - - if (secondPitch) - pitch = secondPitch; - - if (!(newmodes = xrealloc(modes, (*num + 1) * sizeof(DGAModeRec)))) - break; - - modes = newmodes; - currentMode = modes + *num; - - currentMode->mode = pMode; - currentMode->flags = DGA_CONCURRENT_ACCESS; - - if (pixmap) - currentMode->flags |= DGA_PIXMAP_AVAILABLE; - - if (info->accel) { - if (info->accel->SetupForSolidFill && - info->accel->SubsequentSolidFillRect) - currentMode->flags |= DGA_FILL_RECT; - if (info->accel->SetupForScreenToScreenCopy && - info->accel->SubsequentScreenToScreenCopy) - currentMode->flags |= DGA_BLIT_RECT | DGA_BLIT_RECT_TRANS; - if (currentMode->flags & - (DGA_PIXMAP_AVAILABLE | DGA_FILL_RECT | - DGA_BLIT_RECT | DGA_BLIT_RECT_TRANS)) - currentMode->flags &= ~DGA_CONCURRENT_ACCESS; - } - if (pMode->Flags & V_DBLSCAN) - currentMode->flags |= DGA_DOUBLESCAN; - if (pMode->Flags & V_INTERLACE) - currentMode->flags |= DGA_INTERLACED; - - currentMode->byteOrder = pScrn->imageByteOrder; - currentMode->depth = depth; - currentMode->bitsPerPixel = bitsPerPixel; - currentMode->red_mask = red; - currentMode->green_mask = green; - currentMode->blue_mask = blue; - currentMode->visualClass = visualClass; - currentMode->viewportWidth = pMode->HDisplay; - currentMode->viewportHeight = pMode->VDisplay; - currentMode->xViewportStep = 8; - currentMode->yViewportStep = 1; - currentMode->viewportFlags = DGA_FLIP_RETRACE; - currentMode->offset = 0; - currentMode->address = (unsigned char*)info->LinearAddr; - currentMode->bytesPerScanline = pitch * Bpp; - currentMode->imageWidth = pitch; - currentMode->imageHeight = (info->FbMapSize - / currentMode->bytesPerScanline); - currentMode->pixmapWidth = currentMode->imageWidth; - currentMode->pixmapHeight = currentMode->imageHeight; - currentMode->maxViewportX = (currentMode->imageWidth - - currentMode->viewportWidth); - /* this might need to get clamped to some maximum */ - currentMode->maxViewportY = (currentMode->imageHeight - - currentMode->viewportHeight); - (*num)++; - } - - pMode = pMode->next; - if (pMode == firstMode) - break; - } - - if (secondPitch) { - secondPitch = 0; - goto SECOND_PASS; - } - - return modes; -} - -Bool RADEONDGAInit(ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - RADEONInfoPtr info = RADEONPTR(pScrn); - DGAModePtr modes = NULL; - int num = 0; - - /* 8 */ - modes = RADEONSetupDGAMode(pScrn, modes, &num, 8, 8, - (pScrn->bitsPerPixel == 8), - ((pScrn->bitsPerPixel != 8) - ? 0 : pScrn->displayWidth), - 0, 0, 0, PseudoColor); - - /* 15 */ - modes = RADEONSetupDGAMode(pScrn, modes, &num, 16, 15, - (pScrn->bitsPerPixel == 16), - ((pScrn->depth != 15) - ? 0 : pScrn->displayWidth), - 0x7c00, 0x03e0, 0x001f, TrueColor); - - modes = RADEONSetupDGAMode(pScrn, modes, &num, 16, 15, - (pScrn->bitsPerPixel == 16), - ((pScrn->depth != 15) - ? 0 : pScrn->displayWidth), - 0x7c00, 0x03e0, 0x001f, DirectColor); - - /* 16 */ - modes = RADEONSetupDGAMode(pScrn, modes, &num, 16, 16, - (pScrn->bitsPerPixel == 16), - ((pScrn->depth != 16) - ? 0 : pScrn->displayWidth), - 0xf800, 0x07e0, 0x001f, TrueColor); - - modes = RADEONSetupDGAMode(pScrn, modes, &num, 16, 16, - (pScrn->bitsPerPixel == 16), - ((pScrn->depth != 16) - ? 0 : pScrn->displayWidth), - 0xf800, 0x07e0, 0x001f, DirectColor); - - /* 32 */ - modes = RADEONSetupDGAMode(pScrn, modes, &num, 32, 24, - (pScrn->bitsPerPixel == 32), - ((pScrn->bitsPerPixel != 32) - ? 0 : pScrn->displayWidth), - 0xff0000, 0x00ff00, 0x0000ff, TrueColor); - - modes = RADEONSetupDGAMode(pScrn, modes, &num, 32, 24, - (pScrn->bitsPerPixel == 32), - ((pScrn->bitsPerPixel != 32) - ? 0 : pScrn->displayWidth), - 0xff0000, 0x00ff00, 0x0000ff, DirectColor); - - info->numDGAModes = num; - info->DGAModes = modes; - - info->DGAFuncs.OpenFramebuffer = RADEON_OpenFramebuffer; - info->DGAFuncs.CloseFramebuffer = NULL; - info->DGAFuncs.SetMode = RADEON_SetMode; - info->DGAFuncs.SetViewport = RADEON_SetViewport; - info->DGAFuncs.GetViewport = RADEON_GetViewport; - - info->DGAFuncs.Sync = NULL; - info->DGAFuncs.FillRect = NULL; - info->DGAFuncs.BlitRect = NULL; - info->DGAFuncs.BlitTransRect = NULL; - - if (info->accel) { - info->DGAFuncs.Sync = info->accel->Sync; - if (info->accel->SetupForSolidFill && - info->accel->SubsequentSolidFillRect) - info->DGAFuncs.FillRect = RADEON_FillRect; - if (info->accel->SetupForScreenToScreenCopy && - info->accel->SubsequentScreenToScreenCopy) { - info->DGAFuncs.BlitRect = RADEON_BlitRect; - info->DGAFuncs.BlitTransRect = RADEON_BlitTransRect; - } - } - - return DGAInit(pScreen, &info->DGAFuncs, modes, num); -} - -static Bool RADEON_SetMode(ScrnInfoPtr pScrn, DGAModePtr pMode) -{ - static RADEONFBLayout SavedLayouts[MAXSCREENS]; - int indx = pScrn->pScreen->myNum; - RADEONInfoPtr info = RADEONPTR(pScrn); - - if (!pMode) { /* restore the original mode */ - /* put the ScreenParameters back */ - if (info->DGAactive) - memcpy(&info->CurrentLayout, &SavedLayouts[indx], - sizeof(RADEONFBLayout)); - - pScrn->currentMode = info->CurrentLayout.mode; - - RADEONSwitchMode(indx, pScrn->currentMode, 0); -#ifdef XF86DRI - if (info->directRenderingEnabled) { - RADEONCP_STOP(pScrn, info); - } -#endif - if (info->accelOn) - RADEONEngineInit(pScrn); -#ifdef XF86DRI - if (info->directRenderingEnabled) { - RADEONCP_START(pScrn, info); - } -#endif - RADEONAdjustFrame(indx, 0, 0, 0); - info->DGAactive = FALSE; - } else { - if (!info->DGAactive) { /* save the old parameters */ - memcpy(&SavedLayouts[indx], &info->CurrentLayout, - sizeof(RADEONFBLayout)); - info->DGAactive = TRUE; - } - - info->CurrentLayout.bitsPerPixel = pMode->bitsPerPixel; - info->CurrentLayout.depth = pMode->depth; - info->CurrentLayout.displayWidth = (pMode->bytesPerScanline / - (pMode->bitsPerPixel >> 3)); - info->CurrentLayout.pixel_bytes = pMode->bitsPerPixel / 8; - info->CurrentLayout.pixel_code = (pMode->bitsPerPixel != 16 - ? pMode->bitsPerPixel - : pMode->depth); - /* RADEONModeInit() will set the mode field */ - - RADEONSwitchMode(indx, pMode->mode, 0); - -#ifdef XF86DRI - if (info->directRenderingEnabled) { - RADEONCP_STOP(pScrn, info); - } -#endif - if (info->accelOn) - RADEONEngineInit(pScrn); -#ifdef XF86DRI - if (info->directRenderingEnabled) { - RADEONCP_START(pScrn, info); - } -#endif - } - - return TRUE; -} - -static int RADEON_GetViewport(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - - return info->DGAViewportStatus; -} - -static void RADEON_SetViewport(ScrnInfoPtr pScrn, int x, int y, int flags) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - - RADEONAdjustFrame(pScrn->pScreen->myNum, x, y, flags); - info->DGAViewportStatus = 0; /* FIXME */ -} - -static void RADEON_FillRect(ScrnInfoPtr pScrn, - int x, int y, int w, int h, - unsigned long color) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - - (*info->accel->SetupForSolidFill)(pScrn, color, GXcopy, (CARD32)(~0)); - (*info->accel->SubsequentSolidFillRect)(pScrn, x, y, w, h); - - if (pScrn->bitsPerPixel == info->CurrentLayout.bitsPerPixel) - SET_SYNC_FLAG(info->accel); -} - -static void RADEON_BlitRect(ScrnInfoPtr pScrn, - int srcx, int srcy, int w, int h, - int dstx, int dsty) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - int xdir = ((srcx < dstx) && (srcy == dsty)) ? -1 : 1; - int ydir = (srcy < dsty) ? -1 : 1; - - (*info->accel->SetupForScreenToScreenCopy)(pScrn, xdir, ydir, - GXcopy, (CARD32)(~0), -1); - (*info->accel->SubsequentScreenToScreenCopy)(pScrn, srcx, srcy, - dstx, dsty, w, h); - - if (pScrn->bitsPerPixel == info->CurrentLayout.bitsPerPixel) - SET_SYNC_FLAG(info->accel); -} - -static void RADEON_BlitTransRect(ScrnInfoPtr pScrn, - int srcx, int srcy, int w, int h, - int dstx, int dsty, unsigned long color) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - int xdir = ((srcx < dstx) && (srcy == dsty)) ? -1 : 1; - int ydir = (srcy < dsty) ? -1 : 1; - - info->XAAForceTransBlit = TRUE; - - (*info->accel->SetupForScreenToScreenCopy)(pScrn, xdir, ydir, - GXcopy, (CARD32)(~0), color); - - info->XAAForceTransBlit = FALSE; - - (*info->accel->SubsequentScreenToScreenCopy)(pScrn, srcx, srcy, - dstx, dsty, w, h); - - if (pScrn->bitsPerPixel == info->CurrentLayout.bitsPerPixel) - SET_SYNC_FLAG(info->accel); -} - -static Bool RADEON_OpenFramebuffer(ScrnInfoPtr pScrn, - char **name, - unsigned char **mem, - int *size, int *offset, int *flags) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - - *name = NULL; /* no special device */ - *mem = (unsigned char*)info->LinearAddr; - *size = info->FbMapSize; - *offset = 0; - *flags = 0; /* DGA_NEED_ROOT; -- don't need root, just /dev/mem access */ - - return TRUE; -} diff --git a/src/radeon_dri.c b/src/radeon_dri.c index f0af0949..396f3c20 100644 --- a/src/radeon_dri.c +++ b/src/radeon_dri.c @@ -56,15 +56,7 @@ #include "sarea.h" #include "radeon_sarea.h" -/* HACK - for now, put this here... */ -/* Alpha - this may need to be a variable to handle UP1x00 vs TITAN */ -#if defined(__alpha__) -# define DRM_PAGE_SIZE 8192 -#elif defined(__ia64__) -# define DRM_PAGE_SIZE getpagesize() -#else -# define DRM_PAGE_SIZE 4096 -#endif +static size_t radeon_drm_page_size; static Bool RADEONDRICloseFullScreen(ScreenPtr pScreen); @@ -692,11 +684,11 @@ static void RADEONDRIInitGARTValues(RADEONInfoPtr info) /* Initialize the CP ring buffer data */ info->ringStart = info->gartOffset; - info->ringMapSize = info->ringSize*1024*1024 + DRM_PAGE_SIZE; + info->ringMapSize = info->ringSize*1024*1024 + radeon_drm_page_size; info->ringSizeLog2QW = RADEONMinBits(info->ringSize*1024*1024/8)-1; info->ringReadOffset = info->ringStart + info->ringMapSize; - info->ringReadMapSize = DRM_PAGE_SIZE; + info->ringReadMapSize = radeon_drm_page_size; /* Reserve space for vertex/indirect buffers */ info->bufStart = info->ringReadOffset + info->ringReadMapSize; @@ -1225,6 +1217,8 @@ Bool RADEONDRIScreenInit(ScreenPtr pScreen) break; } + radeon_drm_page_size = getpagesize(); + /* Create the DRI data structure, and fill it in before calling the * DRIScreenInit(). */ diff --git a/src/radeon_dri.h b/src/radeon_dri.h deleted file mode 100644 index 4453fe6f..00000000 --- a/src/radeon_dri.h +++ /dev/null @@ -1,109 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_dri.h,v 1.4 2002/10/30 12:52:13 alanh Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * Rickard E. Faith <faith@valinux.com> - * - */ - -#ifndef _RADEON_DRI_ -#define _RADEON_DRI_ - -#include "xf86drm.h" - -/* DRI Driver defaults */ -#define RADEON_DEFAULT_CP_PIO_MODE RADEON_CSQ_PRIPIO_INDPIO -#define RADEON_DEFAULT_CP_BM_MODE RADEON_CSQ_PRIBM_INDBM -/* Default to AGP 4x mode for IGP chips, there are some problems with 1x and 2x - * modes on AGP master side - */ -#define RADEON_DEFAULT_AGP_MODE (info->IsIGP ? 4 : 1) -#define RADEON_DEFAULT_AGP_FAST_WRITE 0 -#define RADEON_DEFAULT_GART_SIZE 8 /* MB (must be 2^n and > 4MB) */ -#define RADEON_DEFAULT_RING_SIZE 1 /* MB (must be page aligned) */ -#define RADEON_DEFAULT_BUFFER_SIZE 2 /* MB (must be page aligned) */ -#define RADEON_DEFAULT_GART_TEX_SIZE 1 /* MB (must be page aligned) */ - -#define RADEON_DEFAULT_CP_TIMEOUT 10000 /* usecs */ - -#define RADEON_AGP_MAX_MODE 4 - -#define RADEON_CARD_TYPE_RADEON 1 - -/* Buffer are aligned on 4096 byte boundaries */ -#define RADEON_BUFFER_ALIGN 0x00000fff - -#define RADEONCP_USE_RING_BUFFER(m) \ - (((m) == RADEON_CSQ_PRIBM_INDDIS) || \ - ((m) == RADEON_CSQ_PRIBM_INDBM)) - -typedef struct { - /* DRI screen private data */ - int deviceID; /* PCI device ID */ - int width; /* Width in pixels of display */ - int height; /* Height in scanlines of display */ - int depth; /* Depth of display (8, 15, 16, 24) */ - int bpp; /* Bit depth of display (8, 16, 24, 32) */ - - int IsPCI; /* Current card is a PCI card */ - int AGPMode; - - int frontOffset; /* Start of front buffer */ - int frontPitch; - int backOffset; /* Start of shared back buffer */ - int backPitch; - int depthOffset; /* Start of shared depth buffer */ - int depthPitch; - int textureOffset;/* Start of texture data in frame buffer */ - int textureSize; - int log2TexGran; - - /* MMIO register data */ - drm_handle_t registerHandle; - drmSize registerSize; - - /* CP in-memory status information */ - drm_handle_t statusHandle; - drmSize statusSize; - - /* CP GART Texture data */ - drm_handle_t gartTexHandle; - drmSize gartTexMapSize; - int log2GARTTexGran; - int gartTexOffset; - unsigned int sarea_priv_offset; - -#ifdef PER_CONTEXT_SAREA - drmSize perctx_sarea_size; -#endif -} RADEONDRIRec, *RADEONDRIPtr; - -#endif diff --git a/src/radeon_dripriv.h b/src/radeon_dripriv.h deleted file mode 100644 index 59f54589..00000000 --- a/src/radeon_dripriv.h +++ /dev/null @@ -1,64 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_dripriv.h,v 1.4 2002/10/30 12:52:13 alanh Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * Rickard E. Faith <faith@valinux.com> - * - */ - -#ifndef _RADEON_DRIPRIV_H_ -#define _RADEON_DRIPRIV_H_ - -#include "GL/glxint.h" -#include "xf86drm.h" -#include "radeon_common.h" - -#define RADEON_MAX_DRAWABLES 256 - -extern void GlxSetVisualConfigs(int nconfigs, __GLXvisualConfig *configs, - void **configprivs); - -typedef struct { - /* Nothing here yet */ - int dummy; -} RADEONConfigPrivRec, *RADEONConfigPrivPtr; - -typedef struct { -#ifdef PER_CONTEXT_SAREA - drm_context_t ctx_id; - drm_handle_t sarea_handle; -#else - /* Nothing here yet */ - int dummy; -#endif -} RADEONDRIContextRec, *RADEONDRIContextPtr; - -#endif diff --git a/src/radeon_driver.c b/src/radeon_driver.c index bfc50c43..8a8aae7f 100644 --- a/src/radeon_driver.c +++ b/src/radeon_driver.c @@ -4474,15 +4474,21 @@ Bool RADEONScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv) int bufferSize = ((pScrn->virtualY * width_bytes + RADEON_BUFFER_ALIGN) & ~RADEON_BUFFER_ALIGN); - int depthSize = ((((pScrn->virtualY+15) & ~15) * width_bytes - + RADEON_BUFFER_ALIGN) - & ~RADEON_BUFFER_ALIGN); + int depthSize; int l; int scanlines; info->frontOffset = 0; info->frontPitch = pScrn->displayWidth; + /* Due to tiling, the Z buffer pitch must be a multiple of 32 pixels, + * and its height a multiple of 16 lines. + */ + info->depthPitch = (pScrn->displayWidth + 31) & ~31; + depthSize = ((((pScrn->virtualY+15) & ~15) * info->depthPitch + * info->CurrentLayout.pixel_bytes + RADEON_BUFFER_ALIGN) + & ~RADEON_BUFFER_ALIGN); + switch (info->CPMode) { case RADEON_DEFAULT_CP_PIO_MODE: xf86DrvMsg(pScrn->scrnIndex, X_INFO, "CP in PIO mode\n"); @@ -4573,7 +4579,6 @@ Bool RADEONScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv) info->depthOffset = ((info->textureOffset - depthSize + RADEON_BUFFER_ALIGN) & ~(CARD32)RADEON_BUFFER_ALIGN); - info->depthPitch = pScrn->displayWidth; /* Reserve space for the shared back buffer */ if (info->noBackBuffer) { diff --git a/src/radeon_macros.h b/src/radeon_macros.h deleted file mode 100644 index 5beaee8f..00000000 --- a/src/radeon_macros.h +++ /dev/null @@ -1,134 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_macros.h,v 1.3 2003/07/08 16:55:35 tsi Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * Rickard E. Faith <faith@valinux.com> - * Alan Hourihane <alanh@fairlite.demon.co.uk> - * - * References: - * - * !!!! FIXME !!!! - * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical - * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April - * 1999. - * - * !!!! FIXME !!!! - * RAGE 128 Software Development Manual (Technical Reference Manual P/N - * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. - * - */ - - -#ifndef _RADEON_MACROS_H_ -#define _RADEON_MACROS_H_ - -#ifdef XFree86Module -#include "xf86_ansic.h" -#endif -#include "compiler.h" - - /* Memory mapped register access macros */ -#define INREG8(addr) MMIO_IN8(RADEONMMIO, addr) -#define INREG16(addr) MMIO_IN16(RADEONMMIO, addr) -#define INREG(addr) MMIO_IN32(RADEONMMIO, addr) -#define OUTREG8(addr, val) MMIO_OUT8(RADEONMMIO, addr, val) -#define OUTREG16(addr, val) MMIO_OUT16(RADEONMMIO, addr, val) -#define OUTREG(addr, val) MMIO_OUT32(RADEONMMIO, addr, val) - -#define ADDRREG(addr) ((volatile CARD32 *)(pointer)(RADEONMMIO + (addr))) - - -#define OUTREGP(addr, val, mask) \ -do { \ - CARD32 tmp = INREG(addr); \ - tmp &= (mask); \ - tmp |= (val); \ - OUTREG(addr, tmp); \ -} while (0) - -#define INPLL(pScrn, addr) RADEONINPLL(pScrn, addr) - -#define OUTPLL(addr, val) \ -do { \ - OUTREG8(RADEON_CLOCK_CNTL_INDEX, (((addr) & 0x3f) | \ - RADEON_PLL_WR_EN)); \ - OUTREG(RADEON_CLOCK_CNTL_DATA, val); \ -} while (0) - -#define OUTPLLP(pScrn, addr, val, mask) \ -do { \ - CARD32 tmp_ = INPLL(pScrn, addr); \ - tmp_ &= (mask); \ - tmp_ |= (val); \ - OUTPLL(addr, tmp_); \ -} while (0) - -#define OUTPAL_START(idx) \ -do { \ - OUTREG8(RADEON_PALETTE_INDEX, (idx)); \ -} while (0) - -#define OUTPAL_NEXT(r, g, b) \ -do { \ - OUTREG(RADEON_PALETTE_DATA, ((r) << 16) | ((g) << 8) | (b)); \ -} while (0) - -#define OUTPAL_NEXT_CARD32(v) \ -do { \ - OUTREG(RADEON_PALETTE_DATA, (v & 0x00ffffff)); \ -} while (0) - -#define OUTPAL(idx, r, g, b) \ -do { \ - OUTPAL_START((idx)); \ - OUTPAL_NEXT((r), (g), (b)); \ -} while (0) - -#define INPAL_START(idx) \ -do { \ - OUTREG(RADEON_PALETTE_INDEX, (idx) << 16); \ -} while (0) - -#define INPAL_NEXT() INREG(RADEON_PALETTE_DATA) - -#define PAL_SELECT(idx) \ -do { \ - if (!idx) { \ - OUTREG(RADEON_DAC_CNTL2, INREG(RADEON_DAC_CNTL2) & \ - (CARD32)~RADEON_DAC2_PALETTE_ACC_CTL); \ - } else { \ - OUTREG(RADEON_DAC_CNTL2, INREG(RADEON_DAC_CNTL2) | \ - RADEON_DAC2_PALETTE_ACC_CTL); \ - } \ -} while (0) - - -#endif diff --git a/src/radeon_mergedfb.c b/src/radeon_mergedfb.c deleted file mode 100644 index e9910e8f..00000000 --- a/src/radeon_mergedfb.c +++ /dev/null @@ -1,1560 +0,0 @@ -/* $XFree86$ */ -/* - * Copyright 2003 Alex Deucher. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ALEX DEUCHER, OR ANY OTHER - * CONTRIBUTORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Alex Deucher <agd5f@yahoo.com> - */ - -#include "xf86.h" -#include "xf86Priv.h" -#include "xf86Resources.h" -#include "xf86_OSproc.h" -#include "extnsionst.h" /* required */ -#include "panoramiXproto.h" /* required */ -#include "dixstruct.h" -#include "vbe.h" - - -#include "radeon.h" -#include "radeon_macros.h" -#include "radeon_reg.h" -#include "radeon_mergedfb.h" - -/* psuedo xinerama support */ -static unsigned char RADEONXineramaReqCode = 0; -int RADEONXineramaPixWidth = 0; -int RADEONXineramaPixHeight = 0; -int RADEONXineramaNumScreens = 0; -RADEONXineramaData *RADEONXineramadataPtr = NULL; -static int RADEONXineramaGeneration; -Bool RADEONnoPanoramiXExtension = TRUE; - -int RADEONProcXineramaQueryVersion(ClientPtr client); -int RADEONProcXineramaGetState(ClientPtr client); -int RADEONProcXineramaGetScreenCount(ClientPtr client); -int RADEONProcXineramaGetScreenSize(ClientPtr client); -int RADEONProcXineramaIsActive(ClientPtr client); -int RADEONProcXineramaQueryScreens(ClientPtr client); -int RADEONSProcXineramaDispatch(ClientPtr client); - -static void -RADEONChooseCursorCRTC(ScrnInfoPtr pScrn1, int x, int y); - -/* mergedfb functions */ -/* Helper function for CRT2 monitor vrefresh/hsync options - * (Taken from mga, sis drivers) - */ -int -RADEONStrToRanges(range *r, char *s, int max) -{ - float num = 0.0; - int rangenum = 0; - Bool gotdash = FALSE; - Bool nextdash = FALSE; - char* strnum = NULL; - do { - switch(*s) { - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - case '8': - case '9': - case '.': - if(strnum == NULL) { - strnum = s; - gotdash = nextdash; - nextdash = FALSE; - } - break; - case '-': - case ' ': - case 0: - if(strnum == NULL) break; - sscanf(strnum, "%f", &num); - strnum = NULL; - if(gotdash) - r[rangenum - 1].hi = num; - else { - r[rangenum].lo = num; - r[rangenum].hi = num; - rangenum++; - } - if(*s == '-') nextdash = (rangenum != 0); - else if(rangenum >= max) return rangenum; - break; - default : - return 0; - } - } while(*(s++) != 0); - - return rangenum; -} - -/* Copy and link two modes form merged-fb mode - * (Taken from mga, sis drivers) - * Copys mode i, links the result to dest, and returns it. - * Links i and j in Private record. - * If dest is NULL, return value is copy of i linked to itself. - * For mergedfb auto-config, we only check the dimension - * against virtualX/Y, if they were user-provided. - */ -static DisplayModePtr -RADEONCopyModeNLink(ScrnInfoPtr pScrn, DisplayModePtr dest, - DisplayModePtr i, DisplayModePtr j, - RADEONScrn2Rel srel) -{ - DisplayModePtr mode; - int dx = 0,dy = 0; - RADEONInfoPtr info = RADEONPTR(pScrn); - - if(!((mode = xalloc(sizeof(DisplayModeRec))))) return dest; - memcpy(mode, i, sizeof(DisplayModeRec)); - if(!((mode->Private = xalloc(sizeof(RADEONMergedDisplayModeRec))))) { - xfree(mode); - return dest; - } - ((RADEONMergedDisplayModePtr)mode->Private)->CRT1 = i; - ((RADEONMergedDisplayModePtr)mode->Private)->CRT2 = j; - ((RADEONMergedDisplayModePtr)mode->Private)->CRT2Position = srel; - mode->PrivSize = 0; - - switch(srel) { - case radeonLeftOf: - case radeonRightOf: - if(!(pScrn->display->virtualX)) { - dx = i->HDisplay + j->HDisplay; - } else { - dx = min(pScrn->virtualX, i->HDisplay + j->HDisplay); - } - dx -= mode->HDisplay; - if(!(pScrn->display->virtualY)) { - dy = max(i->VDisplay, j->VDisplay); - } else { - dy = min(pScrn->virtualY, max(i->VDisplay, j->VDisplay)); - } - dy -= mode->VDisplay; - break; - case radeonAbove: - case radeonBelow: - if(!(pScrn->display->virtualY)) { - dy = i->VDisplay + j->VDisplay; - } else { - dy = min(pScrn->virtualY, i->VDisplay + j->VDisplay); - } - dy -= mode->VDisplay; - if(!(pScrn->display->virtualX)) { - dx = max(i->HDisplay, j->HDisplay); - } else { - dx = min(pScrn->virtualX, max(i->HDisplay, j->HDisplay)); - } - dx -= mode->HDisplay; - break; - case radeonClone: - if(!(pScrn->display->virtualX)) { - dx = max(i->HDisplay, j->HDisplay); - } else { - dx = min(pScrn->virtualX, max(i->HDisplay, j->HDisplay)); - } - dx -= mode->HDisplay; - if(!(pScrn->display->virtualY)) { - dy = max(i->VDisplay, j->VDisplay); - } else { - dy = min(pScrn->virtualY, max(i->VDisplay, j->VDisplay)); - } - dy -= mode->VDisplay; - break; - } - mode->HDisplay += dx; - mode->HSyncStart += dx; - mode->HSyncEnd += dx; - mode->HTotal += dx; - mode->VDisplay += dy; - mode->VSyncStart += dy; - mode->VSyncEnd += dy; - mode->VTotal += dy; - mode->Clock = 0; - - if( ((mode->HDisplay * ((pScrn->bitsPerPixel + 7) / 8) * mode->VDisplay) > - (pScrn->videoRam * 1024)) || - (mode->HDisplay > 8192) || - (mode->VDisplay > 8192) ) { - - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Skipped %dx%d, not enough video RAM or beyond hardware specs\n", - mode->HDisplay, mode->VDisplay); - xfree(mode->Private); - xfree(mode); - - return dest; - } - - if(srel != radeonClone) { - info->AtLeastOneNonClone = TRUE; - } - - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Merged %dx%d and %dx%d to %dx%d%s\n", - i->HDisplay, i->VDisplay, j->HDisplay, j->VDisplay, - mode->HDisplay, mode->VDisplay, (srel == radeonClone) ? " (Clone)" : ""); - - mode->next = mode; - mode->prev = mode; - - if(dest) { - mode->next = dest->next; /* Insert node after "dest" */ - dest->next->prev = mode; - mode->prev = dest; - dest->next = mode; - } - - return mode; -} - -/* Helper function to find a mode from a given name - * (Taken from mga driver) - */ -static DisplayModePtr -RADEONGetModeFromName(char* str, DisplayModePtr i) -{ - DisplayModePtr c = i; - if(!i) return NULL; - do { - if(strcmp(str, c->name) == 0) return c; - c = c->next; - } while(c != i); - return NULL; -} - -static DisplayModePtr -RADEONFindWidestTallestMode(DisplayModePtr i, Bool tallest) -{ - DisplayModePtr c = i, d = NULL; - int max = 0; - if(!i) return NULL; - do { - if(tallest) { - if(c->VDisplay > max) { - max = c->VDisplay; - d = c; - } - } else { - if(c->HDisplay > max) { - max = c->HDisplay; - d = c; - } - } - c = c->next; - } while(c != i); - return d; -} - -static DisplayModePtr -RADEONGenerateModeListFromLargestModes(ScrnInfoPtr pScrn, - DisplayModePtr i, DisplayModePtr j, - RADEONScrn2Rel srel) -{ - - RADEONInfoPtr info = RADEONPTR(pScrn); - DisplayModePtr mode1 = NULL; - DisplayModePtr mode2 = NULL; - DisplayModePtr result = NULL; - int p = 0; - int count = 0; - - info->AtLeastOneNonClone = FALSE; - - - switch(srel) { - case radeonLeftOf: - case radeonRightOf: - mode1 = RADEONFindWidestTallestMode(i, FALSE); - mode2 = RADEONFindWidestTallestMode(j, FALSE); - break; - case radeonAbove: - case radeonBelow: - mode1 = RADEONFindWidestTallestMode(i, TRUE); - mode2 = RADEONFindWidestTallestMode(j, TRUE); - break; - case radeonClone: - mode1 = i; - mode2 = j; - while (pScrn->display->modes[count]) count++; - for (p = 0; p < count; p++) { - result = RADEONCopyModeNLink(pScrn, result, mode1, mode2, srel); - mode1 = mode1->next; - mode2 = mode2->next; - } - } - - if(mode1 && mode2) { - if (srel == radeonClone) - return result; - else - return(RADEONCopyModeNLink(pScrn, result, mode1, mode2, srel)); - } else { - return NULL; - } -} - -/* Generate the merged-fb mode modelist - * (Taken from mga driver) - */ -static DisplayModePtr -RADEONGenerateModeListFromMetaModes(ScrnInfoPtr pScrn, char* str, - DisplayModePtr i, DisplayModePtr j, - RADEONScrn2Rel srel) -{ - char* strmode = str; - char modename[256]; - Bool gotdash = FALSE; - RADEONScrn2Rel sr; - DisplayModePtr mode1 = NULL; - DisplayModePtr mode2 = NULL; - DisplayModePtr result = NULL; - RADEONInfoPtr info = RADEONPTR(pScrn); - - info->AtLeastOneNonClone = FALSE; - - do { - switch(*str) { - case 0: - case '-': - case ' ': - if((strmode != str)) { - - strncpy(modename, strmode, str - strmode); - modename[str - strmode] = 0; - - if(gotdash) { - if(mode1 == NULL) return NULL; - mode2 = RADEONGetModeFromName(modename, j); - if(!mode2) { - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Mode \"%s\" is not a supported mode for CRT2\n", modename); - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Skipping metamode \"%s-%s\".\n", mode1->name, modename); - mode1 = NULL; - } - } else { - mode1 = RADEONGetModeFromName(modename, i); - if(!mode1) { - char* tmps = str; - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Mode \"%s\" is not a supported mode for CRT1\n", modename); - gotdash = FALSE; - while(*tmps == ' ') tmps++; - if(*tmps == '-') { /* skip the next mode */ - tmps++; - while((*tmps == ' ') && (*tmps != 0)) tmps++; /* skip spaces */ - while((*tmps != ' ') && (*tmps != '-') && (*tmps != 0)) tmps++; /* skip modename */ - strncpy(modename,strmode,tmps - strmode); - modename[tmps - strmode] = 0; - str = tmps-1; - } - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Skipping metamode \"%s\".\n", modename); - mode1 = NULL; - } - } - gotdash = FALSE; - } - strmode = str + 1; - gotdash |= (*str == '-'); - - if(*str != 0) break; - /* Fall through otherwise */ - - default: - if(!gotdash && mode1) { - sr = srel; - if(!mode2) { - mode2 = RADEONGetModeFromName(mode1->name, j); - sr = radeonClone; - } - if(!mode2) { - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Mode: \"%s\" is not a supported mode for CRT2\n", mode1->name); - xf86DrvMsg(pScrn->scrnIndex, X_WARNING, - "Skipping metamode \"%s\".\n"); - mode1 = NULL; - } else { - result = RADEONCopyModeNLink(pScrn, result, mode1, mode2, sr); - mode1 = NULL; - mode2 = NULL; - } - } - break; - - } - - } while(*(str++) != 0); - - return result; -} - -DisplayModePtr -RADEONGenerateModeList(ScrnInfoPtr pScrn, char* str, - DisplayModePtr i, DisplayModePtr j, - RADEONScrn2Rel srel) -{ - if(str != NULL) { - return(RADEONGenerateModeListFromMetaModes(pScrn, str, i, j, srel)); - } else { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "No MetaModes given, linking %s modes by default\n", - (srel == radeonClone) ? "first" : "largest"); - return(RADEONGenerateModeListFromLargestModes(pScrn, i, j, srel)); - } -} - -void -RADEONRecalcDefaultVirtualSize(ScrnInfoPtr pScrn) -{ - DisplayModePtr mode, bmode; - int max; - static const char *str = "MergedFB: Virtual %s %d\n"; - - if(!(pScrn->display->virtualX)) { - mode = bmode = pScrn->modes; - max = 0; - do { - if(mode->HDisplay > max) max = mode->HDisplay; - mode = mode->next; - } while(mode != bmode); - pScrn->virtualX = max; - pScrn->displayWidth = max; - xf86DrvMsg(pScrn->scrnIndex, X_PROBED, str, "width", max); - } - if(!(pScrn->display->virtualY)) { - mode = bmode = pScrn->modes; - max = 0; - do { - if(mode->VDisplay > max) max = mode->VDisplay; - mode = mode->next; - } while(mode != bmode); - pScrn->virtualY = max; - xf86DrvMsg(pScrn->scrnIndex, X_PROBED, str, "height", max); - } -} - -/* Pseudo-Xinerama extension for MergedFB mode */ -void -RADEONUpdateXineramaScreenInfo(ScrnInfoPtr pScrn1) -{ - RADEONInfoPtr info = RADEONPTR(pScrn1); - ScrnInfoPtr pScrn2 = NULL; - int crt1scrnnum = 0, crt2scrnnum = 1; - int x1=0, x2=0, y1=0, y2=0, h1=0, h2=0, w1=0, w2=0; - DisplayModePtr currentMode, firstMode; - Bool infochanged = FALSE; - - if(!info->MergedFB) return; - - if(RADEONnoPanoramiXExtension) return; - - if(!RADEONXineramadataPtr) return; - - if(info->CRT2IsScrn0) { - crt1scrnnum = 1; - crt2scrnnum = 0; - } - - pScrn2 = info->CRT2pScrn; - - /* Attention: Usage of RandR may lead into virtual X and Y values - * actually smaller than our MetaModes! To avoid this, we calculate - * the maxCRT fields here (and not somewhere else, like in CopyNLink) - */ - - if((info->RADEONXineramaVX != pScrn1->virtualX) || (info->RADEONXineramaVY != pScrn1->virtualY)) { - - if(!(pScrn1->modes)) { - xf86DrvMsg(pScrn1->scrnIndex, X_ERROR, - "Internal error: RADEONUpdateXineramaScreenInfo(): pScrn->modes is NULL\n"); - return; - } - - info->maxCRT1_X1 = info->maxCRT1_X2 = 0; - info->maxCRT1_Y1 = info->maxCRT1_Y2 = 0; - info->maxCRT2_X1 = info->maxCRT2_X2 = 0; - info->maxCRT2_Y1 = info->maxCRT2_Y2 = 0; - info->maxClone_X1 = info->maxClone_X2 = 0; - info->maxClone_Y1 = info->maxClone_Y2 = 0; - - currentMode = firstMode = pScrn1->modes; - - do { - - DisplayModePtr p = currentMode->next; - DisplayModePtr i = ((RADEONMergedDisplayModePtr)currentMode->Private)->CRT1; - DisplayModePtr j = ((RADEONMergedDisplayModePtr)currentMode->Private)->CRT2; - RADEONScrn2Rel srel = ((RADEONMergedDisplayModePtr)currentMode->Private)->CRT2Position; - - if((i->HDisplay <= pScrn1->virtualX) && (j->HDisplay <= pScrn1->virtualX) && - (i->VDisplay <= pScrn1->virtualY) && (j->VDisplay <= pScrn1->virtualY)) { - - if(srel != radeonClone) { - if(info->maxCRT1_X1 <= i->HDisplay) { - info->maxCRT1_X1 = i->HDisplay; /* Largest CRT1 mode */ - if(info->maxCRT1_X2 < j->HDisplay) { - info->maxCRT1_X2 = j->HDisplay; /* Largest X of CRT2 mode displayed with largest CRT1 mode */ - } - } - if(info->maxCRT2_X2 <= j->HDisplay) { - info->maxCRT2_X2 = j->HDisplay; /* Largest CRT2 mode */ - if(info->maxCRT2_X1 < i->HDisplay) { - info->maxCRT2_X1 = i->HDisplay; /* Largest X of CRT1 mode displayed with largest CRT2 mode */ - } - } - if(info->maxCRT1_Y1 <= i->VDisplay) { - info->maxCRT1_Y1 = i->VDisplay; - if(info->maxCRT1_Y2 < j->VDisplay) { - info->maxCRT1_Y2 = j->VDisplay; - } - } - if(info->maxCRT2_Y2 <= j->VDisplay) { - info->maxCRT2_Y2 = j->VDisplay; - if(info->maxCRT2_Y1 < i->VDisplay) { - info->maxCRT2_Y1 = i->VDisplay; - } - } - } else { - if(info->maxClone_X1 < i->HDisplay) { - info->maxClone_X1 = i->HDisplay; - } - if(info->maxClone_X2 < j->HDisplay) { - info->maxClone_X2 = j->HDisplay; - } - if(info->maxClone_Y1 < i->VDisplay) { - info->maxClone_Y1 = i->VDisplay; - } - if(info->maxClone_Y2 < j->VDisplay) { - info->maxClone_Y2 = j->VDisplay; - } - } - } - currentMode = p; - - } while((currentMode) && (currentMode != firstMode)); - - info->RADEONXineramaVX = pScrn1->virtualX; - info->RADEONXineramaVY = pScrn1->virtualY; - infochanged = TRUE; - - } - - /* leftof - - V 1: - CRT2: x = 0 - y = 0 - w = (maxCRT2 X) - h = (virtual Y) - CRT1: x = (virtual X) - (maxCRT1 X) - y = 0 - w = (maxCRT1 X) - h = (virtual Y) - - V 2: - CRT2: x = 0 - y = 0 - w = max CRT2 mode X - h = virtual Y size - CRT1: x = (max) CRT2 mode X von dem Metamode, wo CRT1 mode maximal breit ist - y = 0 - w = max CRT1 mode X - h = virtual Y size - - V 3: (current) - CRT1: x = (maxCRT2 X von dem MMode, wo maxCRT1 X) - y = 0 - w = (virtual X) - x - h = (virtual Y) - CRT2: x = 0 - y = 0 - w = (virtual X) - (maxCRT1 X von dem MMode, wo maxCRT2 X) - h = (virtual Y) - - */ - switch(info->CRT2Position) { - case radeonLeftOf: /* V 1 */ - x1 = min(info->maxCRT1_X2, pScrn1->virtualX - info->maxCRT1_X1); /* pScrn1->virtualX - pSiS->maxCRT1_X1; -*/ - if(x1 < 0) x1 = 0; - y1 = 0; /* 0; */ - w1 = pScrn1->virtualX - x1; /* pSiS->maxCRT1_X1; */ - h1 = pScrn1->virtualY; /* pScrn1->virtualY; */ - x2 = 0; /* 0; */ - y2 = 0; /* 0; */ - w2 = max(info->maxCRT2_X2, pScrn1->virtualX - info->maxCRT2_X1); /* pSiS->maxCRT2_X2; */ - if(w2 > pScrn1->virtualX) w2 = pScrn1->virtualX; - h2 = pScrn1->virtualY; /* pScrn1->virtualY; */ - break; - case radeonRightOf: - x1 = 0; /* 0; */ - y1 = 0; /* 0; */ - w1 = max(info->maxCRT1_X1, pScrn1->virtualX - info->maxCRT1_X2); /* pSiS->maxCRT1_X1; */ - if(w1 > pScrn1->virtualX) w1 = pScrn1->virtualX; - h1 = pScrn1->virtualY; /* pScrn1->virtualY; */ - x2 = min(info->maxCRT2_X1, pScrn1->virtualX - info->maxCRT2_X2); /* pScrn1->virtualX - pSiS->maxCRT2_X2; -*/ - if(x2 < 0) x2 = 0; - y2 = 0; /* 0; */ - w2 = pScrn1->virtualX - x2; /* pSiS->maxCRT2_X2; */ - h2 = pScrn1->virtualY; /* pScrn1->virtualY; */ - break; - case radeonAbove: - x1 = 0; /* 0; */ - y1 = min(info->maxCRT1_Y2, pScrn1->virtualY - info->maxCRT1_Y1); /* pScrn1->virtualY - pSiS->maxCRT1_Y1; -*/ - if(y1 < 0) y1 = 0; - w1 = pScrn1->virtualX; /* pScrn1->virtualX; */ - h1 = pScrn1->virtualY - y1; /* pSiS->maxCRT1_Y1; */ - x2 = 0; /* 0; */ - y2 = 0; /* 0; */ - w2 = pScrn1->virtualX; /* pScrn1->virtualX; */ - h2 = max(info->maxCRT2_Y2, pScrn1->virtualY - info->maxCRT2_Y1); /* pSiS->maxCRT2_Y2; */ - if(h2 > pScrn1->virtualY) h2 = pScrn1->virtualY; - break; - case radeonBelow: - x1 = 0; /* 0; */ - y1 = 0; /* 0; */ - w1 = pScrn1->virtualX; /* pScrn1->virtualX; */ - h1 = max(info->maxCRT1_Y1, pScrn1->virtualY - info->maxCRT1_Y2); /* pSiS->maxCRT1_Y1; */ - if(h1 > pScrn1->virtualY) h1 = pScrn1->virtualY; - x2 = 0; /* 0; */ - y2 = min(info->maxCRT2_Y1, pScrn1->virtualY - info->maxCRT2_Y2); /* pScrn1->virtualY - pSiS->maxCRT2_Y2; -*/ - if(y2 < 0) y2 = 0; - w2 = pScrn1->virtualX; /* pScrn1->virtualX; */ - h2 = pScrn1->virtualY - y2; /* pSiS->maxCRT2_Y2; */ - break; - default: - xf86DrvMsg(pScrn1->scrnIndex, X_ERROR, - "Internal error: UpdateXineramaInfo(): unsupported CRT2Position (%d)\n", - info->CRT2Position); - } - RADEONXineramadataPtr[crt1scrnnum].x = x1; - RADEONXineramadataPtr[crt1scrnnum].y = y1; - RADEONXineramadataPtr[crt1scrnnum].width = w1; - RADEONXineramadataPtr[crt1scrnnum].height = h1; - RADEONXineramadataPtr[crt2scrnnum].x = x2; - RADEONXineramadataPtr[crt2scrnnum].y = y2; - RADEONXineramadataPtr[crt2scrnnum].width = w2; - RADEONXineramadataPtr[crt2scrnnum].height = h2; - - if(infochanged) { - xf86DrvMsg(pScrn1->scrnIndex, X_INFO, - "Pseudo-Xinerama: CRT1 (Screen %d) (%d,%d)-(%d,%d)\n", - crt1scrnnum, x1, y1, w1+x1-1, h1+y1-1); - xf86DrvMsg(pScrn1->scrnIndex, X_INFO, - "Pseudo-Xinerama: CRT2 (Screen %d) (%d,%d)-(%d,%d)\n", - crt2scrnnum, x2, y2, w2+x2-1, h2+y2-1); - } - -} - -/* Proc */ - -int -RADEONProcXineramaQueryVersion(ClientPtr client) -{ - xPanoramiXQueryVersionReply rep; - register int n; - - REQUEST_SIZE_MATCH(xPanoramiXQueryVersionReq); - rep.type = X_Reply; - rep.length = 0; - rep.sequenceNumber = client->sequence; - rep.majorVersion = RADEON_XINERAMA_MAJOR_VERSION; - rep.minorVersion = RADEON_XINERAMA_MINOR_VERSION; - if(client->swapped) { - swaps(&rep.sequenceNumber, n); - swapl(&rep.length, n); - swaps(&rep.majorVersion, n); - swaps(&rep.minorVersion, n); - } - WriteToClient(client, sizeof(xPanoramiXQueryVersionReply), (char *)&rep); - return (client->noClientException); -} - -int -RADEONProcXineramaGetState(ClientPtr client) -{ - REQUEST(xPanoramiXGetStateReq); - WindowPtr pWin; - xPanoramiXGetStateReply rep; - register int n; - - REQUEST_SIZE_MATCH(xPanoramiXGetStateReq); - pWin = LookupWindow(stuff->window, client); - if(!pWin) return BadWindow; - - rep.type = X_Reply; - rep.length = 0; - rep.sequenceNumber = client->sequence; - rep.state = !RADEONnoPanoramiXExtension; - if(client->swapped) { - swaps (&rep.sequenceNumber, n); - swapl (&rep.length, n); - swaps (&rep.state, n); - } - WriteToClient(client, sizeof(xPanoramiXGetStateReply), (char *)&rep); - return client->noClientException; -} - -int -RADEONProcXineramaGetScreenCount(ClientPtr client) -{ - REQUEST(xPanoramiXGetScreenCountReq); - WindowPtr pWin; - xPanoramiXGetScreenCountReply rep; - register int n; - - REQUEST_SIZE_MATCH(xPanoramiXGetScreenCountReq); - pWin = LookupWindow(stuff->window, client); - if(!pWin) return BadWindow; - - rep.type = X_Reply; - rep.length = 0; - rep.sequenceNumber = client->sequence; - rep.ScreenCount = RADEONXineramaNumScreens; - if(client->swapped) { - swaps(&rep.sequenceNumber, n); - swapl(&rep.length, n); - swaps(&rep.ScreenCount, n); - } - WriteToClient(client, sizeof(xPanoramiXGetScreenCountReply), (char *)&rep); - return client->noClientException; -} - -int -RADEONProcXineramaGetScreenSize(ClientPtr client) -{ - REQUEST(xPanoramiXGetScreenSizeReq); - WindowPtr pWin; - xPanoramiXGetScreenSizeReply rep; - register int n; - - REQUEST_SIZE_MATCH(xPanoramiXGetScreenSizeReq); - pWin = LookupWindow (stuff->window, client); - if(!pWin) return BadWindow; - - rep.type = X_Reply; - rep.length = 0; - rep.sequenceNumber = client->sequence; - rep.width = RADEONXineramadataPtr[stuff->screen].width; - rep.height = RADEONXineramadataPtr[stuff->screen].height; - if(client->swapped) { - swaps(&rep.sequenceNumber, n); - swapl(&rep.length, n); - swaps(&rep.width, n); - swaps(&rep.height, n); - } - WriteToClient(client, sizeof(xPanoramiXGetScreenSizeReply), (char *)&rep); - return client->noClientException; -} - -int -RADEONProcXineramaIsActive(ClientPtr client) -{ - xXineramaIsActiveReply rep; - - REQUEST_SIZE_MATCH(xXineramaIsActiveReq); - - rep.type = X_Reply; - rep.length = 0; - rep.sequenceNumber = client->sequence; - rep.state = !RADEONnoPanoramiXExtension; - if(client->swapped) { - register int n; - swaps(&rep.sequenceNumber, n); - swapl(&rep.length, n); - swapl(&rep.state, n); - } - WriteToClient(client, sizeof(xXineramaIsActiveReply), (char *) &rep); - return client->noClientException; -} - -int -RADEONProcXineramaQueryScreens(ClientPtr client) -{ - xXineramaQueryScreensReply rep; - - REQUEST_SIZE_MATCH(xXineramaQueryScreensReq); - - rep.type = X_Reply; - rep.sequenceNumber = client->sequence; - rep.number = (RADEONnoPanoramiXExtension) ? 0 : RADEONXineramaNumScreens; - rep.length = rep.number * sz_XineramaScreenInfo >> 2; - if(client->swapped) { - register int n; - swaps(&rep.sequenceNumber, n); - swapl(&rep.length, n); - swapl(&rep.number, n); - } - WriteToClient(client, sizeof(xXineramaQueryScreensReply), (char *)&rep); - - if(!RADEONnoPanoramiXExtension) { - xXineramaScreenInfo scratch; - int i; - - for(i = 0; i < RADEONXineramaNumScreens; i++) { - scratch.x_org = RADEONXineramadataPtr[i].x; - scratch.y_org = RADEONXineramadataPtr[i].y; - scratch.width = RADEONXineramadataPtr[i].width; - scratch.height = RADEONXineramadataPtr[i].height; - if(client->swapped) { - register int n; - swaps(&scratch.x_org, n); - swaps(&scratch.y_org, n); - swaps(&scratch.width, n); - swaps(&scratch.height, n); - } - WriteToClient(client, sz_XineramaScreenInfo, (char *)&scratch); - } - } - - return client->noClientException; -} - -static int -RADEONProcXineramaDispatch(ClientPtr client) -{ - REQUEST(xReq); - switch (stuff->data) - { - case X_PanoramiXQueryVersion: - return RADEONProcXineramaQueryVersion(client); - case X_PanoramiXGetState: - return RADEONProcXineramaGetState(client); - case X_PanoramiXGetScreenCount: - return RADEONProcXineramaGetScreenCount(client); - case X_PanoramiXGetScreenSize: - return RADEONProcXineramaGetScreenSize(client); - case X_XineramaIsActive: - return RADEONProcXineramaIsActive(client); - case X_XineramaQueryScreens: - return RADEONProcXineramaQueryScreens(client); - } - return BadRequest; -} - -/* SProc */ - -static int -RADEONSProcXineramaQueryVersion (ClientPtr client) -{ - REQUEST(xPanoramiXQueryVersionReq); - register int n; - swaps(&stuff->length,n); - REQUEST_SIZE_MATCH (xPanoramiXQueryVersionReq); - return RADEONProcXineramaQueryVersion(client); -} - -static int -RADEONSProcXineramaGetState(ClientPtr client) -{ - REQUEST(xPanoramiXGetStateReq); - register int n; - swaps (&stuff->length, n); - REQUEST_SIZE_MATCH(xPanoramiXGetStateReq); - return RADEONProcXineramaGetState(client); -} - -static int -RADEONSProcXineramaGetScreenCount(ClientPtr client) -{ - REQUEST(xPanoramiXGetScreenCountReq); - register int n; - swaps (&stuff->length, n); - REQUEST_SIZE_MATCH(xPanoramiXGetScreenCountReq); - return RADEONProcXineramaGetScreenCount(client); -} - -static int -RADEONSProcXineramaGetScreenSize(ClientPtr client) -{ - REQUEST(xPanoramiXGetScreenSizeReq); - register int n; - swaps (&stuff->length, n); - REQUEST_SIZE_MATCH(xPanoramiXGetScreenSizeReq); - return RADEONProcXineramaGetScreenSize(client); -} - -static int -RADEONSProcXineramaIsActive(ClientPtr client) -{ - REQUEST(xXineramaIsActiveReq); - register int n; - swaps (&stuff->length, n); - REQUEST_SIZE_MATCH(xXineramaIsActiveReq); - return RADEONProcXineramaIsActive(client); -} - -static int -RADEONSProcXineramaQueryScreens(ClientPtr client) -{ - REQUEST(xXineramaQueryScreensReq); - register int n; - swaps (&stuff->length, n); - REQUEST_SIZE_MATCH(xXineramaQueryScreensReq); - return RADEONProcXineramaQueryScreens(client); -} - -int -RADEONSProcXineramaDispatch(ClientPtr client) -{ - REQUEST(xReq); - switch (stuff->data) { - case X_PanoramiXQueryVersion: - return RADEONSProcXineramaQueryVersion(client); - case X_PanoramiXGetState: - return RADEONSProcXineramaGetState(client); - case X_PanoramiXGetScreenCount: - return RADEONSProcXineramaGetScreenCount(client); - case X_PanoramiXGetScreenSize: - return RADEONSProcXineramaGetScreenSize(client); - case X_XineramaIsActive: - return RADEONSProcXineramaIsActive(client); - case X_XineramaQueryScreens: - return RADEONSProcXineramaQueryScreens(client); - } - return BadRequest; -} - -static void -RADEONXineramaResetProc(ExtensionEntry* extEntry) -{ - if(RADEONXineramadataPtr) { - Xfree(RADEONXineramadataPtr); - RADEONXineramadataPtr = NULL; - } -} - -void -RADEONXineramaExtensionInit(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - Bool success = FALSE; - - if(!(RADEONXineramadataPtr)) { - - if(!info->MergedFB) { - RADEONnoPanoramiXExtension = TRUE; - return; - } - - if(!noPanoramiXExtension) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Xinerama active, not initializing Radeon Pseudo-Xinerama\n"); - RADEONnoPanoramiXExtension = TRUE; - return; - } - - if(RADEONnoPanoramiXExtension) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Radeon Pseudo-Xinerama disabled\n"); - return; - } - - if(info->CRT2Position == radeonClone) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Running MergedFB in Clone mode, Radeon Pseudo-Xinerama disabled\n"); - RADEONnoPanoramiXExtension = TRUE; - return; - } - - if(!(info->AtLeastOneNonClone)) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Only Clone modes defined, Radeon Pseudo-Xinerama disabled\n"); - RADEONnoPanoramiXExtension = TRUE; - return; - } - - RADEONXineramaNumScreens = 2; - - while(RADEONXineramaGeneration != serverGeneration) { - - info->XineramaExtEntry = AddExtension(PANORAMIX_PROTOCOL_NAME, 0,0, - RADEONProcXineramaDispatch, - RADEONSProcXineramaDispatch, - RADEONXineramaResetProc, - StandardMinorOpcode); - - if(!info->XineramaExtEntry) break; - - RADEONXineramaReqCode = (unsigned char)info->XineramaExtEntry->base; - - if(!(RADEONXineramadataPtr = (RADEONXineramaData *) - xcalloc(RADEONXineramaNumScreens, sizeof(RADEONXineramaData)))) break; - - RADEONXineramaGeneration = serverGeneration; - success = TRUE; - } - - if(!success) { - xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Failed to initialize Radeon Pseudo-Xinerama extension\n"); - RADEONnoPanoramiXExtension = TRUE; - return; - } - - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Initialized Radeon Pseudo-Xinerama extension\n"); - - info->RADEONXineramaVX = 0; - info->RADEONXineramaVY = 0; - - } - - RADEONUpdateXineramaScreenInfo(pScrn); - -} -/* End of PseudoXinerama */ - -static Bool -InRegion(int x, int y, region r) -{ - return (r.x0 <= x) && (x <= r.x1) && (r.y0 <= y) && (y <= r.y1); -} - -void -RADEONMergePointerMoved(int scrnIndex, int x, int y) -{ - ScrnInfoPtr pScrn1 = xf86Screens[scrnIndex]; - RADEONInfoPtr info = RADEONPTR(pScrn1); - ScrnInfoPtr pScrn2 = info->CRT2pScrn; - region out, in1, in2, f2, f1; - int deltax, deltay; - - f1.x0 = info->CRT1frameX0; - f1.x1 = info->CRT1frameX1; - f1.y0 = info->CRT1frameY0; - f1.y1 = info->CRT1frameY1; - f2.x0 = pScrn2->frameX0; - f2.x1 = pScrn2->frameX1; - f2.y0 = pScrn2->frameY0; - f2.y1 = pScrn2->frameY1; - - /* Define the outer region. Crossing this causes all frames to move */ - out.x0 = pScrn1->frameX0; - out.x1 = pScrn1->frameX1; - out.y0 = pScrn1->frameY0; - out.y1 = pScrn1->frameY1; - - /* - * Define the inner sliding window. Being outsize both frames but - * inside the outer clipping window will slide corresponding frame - */ - in1 = out; - in2 = out; - switch(((RADEONMergedDisplayModePtr)info->CurrentLayout.mode->Private)->CRT2Position) { - case radeonLeftOf: - in1.x0 = f1.x0; - in2.x1 = f2.x1; - break; - case radeonRightOf: - in1.x1 = f1.x1; - in2.x0 = f2.x0; - break; - case radeonBelow: - in1.y1 = f1.y1; - in2.y0 = f2.y0; - break; - case radeonAbove: - in1.y0 = f1.y0; - in2.y1 = f2.y1; - break; - case radeonClone: - break; - } - - deltay = 0; - deltax = 0; - - if(InRegion(x, y, out)) { /* inside outer region */ - - /* xf86DrvMsg(0, X_INFO, "1: %d %d | %d %d %d %d | %d %d %d %d\n", - x, y, in1.x0, in1.x1, in1.y0, in1.y1, f1.x0, f1.x1, f1.y0, f1.y1); */ - - if(InRegion(x, y, in1) && !InRegion(x, y, f1)) { - REBOUND(f1.x0, f1.x1, x); - REBOUND(f1.y0, f1.y1, y); - deltax = 1; - /* xf86DrvMsg(0, X_INFO, "2: %d %d | %d %d %d %d | %d %d %d %d\n", - x, y, in1.x0, in1.x1, in1.y0, in1.y1, f1.x0, f1.x1, f1.y0, f1.y1); */ - } - if(InRegion(x, y, in2) && !InRegion(x, y, f2)) { - REBOUND(f2.x0, f2.x1, x); - REBOUND(f2.y0, f2.y1, y); - deltax = 1; - } - - } else { /* outside outer region */ - - /* xf86DrvMsg(0, X_INFO, "3: %d %d | %d %d %d %d | %d %d %d %d\n", - x, y, in1.x0, in1.x1, in1.y0, in1.y1, f1.x0, f1.x1, f1.y0, f1.y1); - xf86DrvMsg(0, X_INFO, "3-out: %d %d %d %d\n", - out.x0, out.x1, out.y0, out.y1); */ - - if(out.x0 > x) { - deltax = x - out.x0; - } - if(out.x1 < x) { - deltax = x - out.x1; - } - if(deltax) { - pScrn1->frameX0 += deltax; - pScrn1->frameX1 += deltax; - f1.x0 += deltax; - f1.x1 += deltax; - f2.x0 += deltax; - f2.x1 += deltax; - } - - if(out.y0 > y) { - deltay = y - out.y0; - } - if(out.y1 < y) { - deltay = y - out.y1; - } - if(deltay) { - pScrn1->frameY0 += deltay; - pScrn1->frameY1 += deltay; - f1.y0 += deltay; - f1.y1 += deltay; - f2.y0 += deltay; - f2.y1 += deltay; - } - - switch(((RADEONMergedDisplayModePtr)info->CurrentLayout.mode->Private)->CRT2Position) { - case radeonLeftOf: - if(x >= f1.x0) { REBOUND(f1.y0, f1.y1, y); } - if(x <= f2.x1) { REBOUND(f2.y0, f2.y1, y); } - break; - case radeonRightOf: - if(x <= f1.x1) { REBOUND(f1.y0, f1.y1, y); } - if(x >= f2.x0) { REBOUND(f2.y0, f2.y1, y); } - break; - case radeonBelow: - if(y <= f1.y1) { REBOUND(f1.x0, f1.x1, x); } - if(y >= f2.y0) { REBOUND(f2.x0, f2.x1, x); } - break; - case radeonAbove: - if(y >= f1.y0) { REBOUND(f1.x0, f1.x1, x); } - if(y <= f2.y1) { REBOUND(f2.x0, f2.x1, x); } - break; - case radeonClone: - break; - } - - } - - if(deltax || deltay) { - info->CRT1frameX0 = f1.x0; - info->CRT1frameY0 = f1.y0; - pScrn2->frameX0 = f2.x0; - pScrn2->frameY0 = f2.y0; - - info->CRT1frameX1 = info->CRT1frameX0 + CDMPTR->CRT1->HDisplay - 1; - info->CRT1frameY1 = info->CRT1frameY0 + CDMPTR->CRT1->VDisplay - 1; - pScrn2->frameX1 = pScrn2->frameX0 + CDMPTR->CRT2->HDisplay - 1; - pScrn2->frameY1 = pScrn2->frameY0 + CDMPTR->CRT2->VDisplay - 1; - pScrn1->frameX1 = pScrn1->frameX0 + info->CurrentLayout.mode->HDisplay - 1; - pScrn1->frameY1 = pScrn1->frameY0 + info->CurrentLayout.mode->VDisplay - 1; - - RADEONDoAdjustFrame(pScrn1, info->CRT1frameX0, info->CRT1frameY0, FALSE); - RADEONDoAdjustFrame(pScrn1, pScrn2->frameX0, pScrn2->frameY0, TRUE); - } -} - -static void -RADEONAdjustFrameMergedHelper(int scrnIndex, int x, int y, int flags) -{ - ScrnInfoPtr pScrn1 = xf86Screens[scrnIndex]; - RADEONInfoPtr info = RADEONPTR(pScrn1); - ScrnInfoPtr pScrn2 = info->CRT2pScrn; - int VTotal = info->CurrentLayout.mode->VDisplay; - int HTotal = info->CurrentLayout.mode->HDisplay; - int VMax = VTotal; - int HMax = HTotal; - - BOUND(x, 0, pScrn1->virtualX - HTotal); - BOUND(y, 0, pScrn1->virtualY - VTotal); - - switch(SDMPTR(pScrn1)->CRT2Position) { - case radeonLeftOf: - pScrn2->frameX0 = x; - BOUND(pScrn2->frameY0, y, y + VMax - CDMPTR->CRT2->VDisplay); - info->CRT1frameX0 = x + CDMPTR->CRT2->HDisplay; - BOUND(info->CRT1frameY0, y, y + VMax - CDMPTR->CRT1->VDisplay); - break; - case radeonRightOf: - info->CRT1frameX0 = x; - BOUND(info->CRT1frameY0, y, y + VMax - CDMPTR->CRT1->VDisplay); - pScrn2->frameX0 = x + CDMPTR->CRT1->HDisplay; - BOUND(pScrn2->frameY0, y, y + VMax - CDMPTR->CRT2->VDisplay); - break; - case radeonAbove: - BOUND(pScrn2->frameX0, x, x + HMax - CDMPTR->CRT2->HDisplay); - pScrn2->frameY0 = y; - BOUND(info->CRT1frameX0, x, x + HMax - CDMPTR->CRT1->HDisplay); - info->CRT1frameY0 = y + CDMPTR->CRT2->VDisplay; - break; - case radeonBelow: - BOUND(info->CRT1frameX0, x, x + HMax - CDMPTR->CRT1->HDisplay); - info->CRT1frameY0 = y; - BOUND(pScrn2->frameX0, x, x + HMax - CDMPTR->CRT2->HDisplay); - pScrn2->frameY0 = y + CDMPTR->CRT1->VDisplay; - break; - case radeonClone: - BOUND(info->CRT1frameX0, x, x + HMax - CDMPTR->CRT1->HDisplay); - BOUND(info->CRT1frameY0, y, y + VMax - CDMPTR->CRT1->VDisplay); - BOUND(pScrn2->frameX0, x, x + HMax - CDMPTR->CRT2->HDisplay); - BOUND(pScrn2->frameY0, y, y + VMax - CDMPTR->CRT2->VDisplay); - break; - } - - BOUND(info->CRT1frameX0, 0, pScrn1->virtualX - CDMPTR->CRT1->HDisplay); - BOUND(info->CRT1frameY0, 0, pScrn1->virtualY - CDMPTR->CRT1->VDisplay); - BOUND(pScrn2->frameX0, 0, pScrn1->virtualX - CDMPTR->CRT2->HDisplay); - BOUND(pScrn2->frameY0, 0, pScrn1->virtualY - CDMPTR->CRT2->VDisplay); - - pScrn1->frameX0 = x; - pScrn1->frameY0 = y; - - info->CRT1frameX1 = info->CRT1frameX0 + CDMPTR->CRT1->HDisplay - 1; - info->CRT1frameY1 = info->CRT1frameY0 + CDMPTR->CRT1->VDisplay - 1; - pScrn2->frameX1 = pScrn2->frameX0 + CDMPTR->CRT2->HDisplay - 1; - pScrn2->frameY1 = pScrn2->frameY0 + CDMPTR->CRT2->VDisplay - 1; - pScrn1->frameX1 = pScrn1->frameX0 + info->CurrentLayout.mode->HDisplay - 1; - pScrn1->frameY1 = pScrn1->frameY0 + info->CurrentLayout.mode->VDisplay - 1; -/* - RADEONDoAdjustFrame(pScrn1, info->CRT1frameX0, info->CRT1frameY0, FALSE); - RADEONDoAdjustFrame(pScrn1, pScrn2->frameX0, pScrn2->frameY0, TRUE); -*/ -} - -void -RADEONAdjustFrameMerged(int scrnIndex, int x, int y, int flags) -{ - ScrnInfoPtr pScrn1 = xf86Screens[scrnIndex]; - RADEONInfoPtr info = RADEONPTR(pScrn1); - ScrnInfoPtr pScrn2 = info->CRT2pScrn; - - RADEONAdjustFrameMergedHelper(scrnIndex, x, y, flags); - RADEONDoAdjustFrame(pScrn1, info->CRT1frameX0, info->CRT1frameY0, FALSE); - RADEONDoAdjustFrame(pScrn1, pScrn2->frameX0, pScrn2->frameY0, TRUE); -} - -void -RADEONMergedFBSetDpi(ScrnInfoPtr pScrn1, ScrnInfoPtr pScrn2, RADEONScrn2Rel srel) -{ - RADEONInfoPtr info = RADEONPTR(pScrn1); - MessageType from = X_DEFAULT; - xf86MonPtr DDC1 = (xf86MonPtr)(pScrn1->monitor->DDC); - xf86MonPtr DDC2 = (xf86MonPtr)(pScrn2->monitor->DDC); - int ddcWidthmm = 0, ddcHeightmm = 0; - const char *dsstr = "MergedFB: Display dimensions: (%d, %d) mm\n"; - - /* This sets the DPI for MergedFB mode. The problem is that - * this can never be exact, because the output devices may - * have different dimensions. This function tries to compromise - * through a few assumptions, and it just calculates an average DPI - * value for both monitors. - */ - - /* Given DisplaySize should regard BOTH monitors */ - pScrn1->widthmm = pScrn1->monitor->widthmm; - pScrn1->heightmm = pScrn1->monitor->heightmm; - - /* Get DDC display size; if only either CRT1 or CRT2 provided these, - * assume equal dimensions for both, otherwise add dimensions - */ - if( (DDC1 && (DDC1->features.hsize > 0 && DDC1->features.vsize > 0)) && - (DDC2 && (DDC2->features.hsize > 0 && DDC2->features.vsize > 0)) ) { - ddcWidthmm = max(DDC1->features.hsize, DDC2->features.hsize) * 10; - ddcHeightmm = max(DDC1->features.vsize, DDC2->features.vsize) * 10; - switch(srel) { - case radeonLeftOf: - case radeonRightOf: - ddcWidthmm = (DDC1->features.hsize + DDC2->features.hsize) * 10; - break; - case radeonAbove: - case radeonBelow: - ddcHeightmm = (DDC1->features.vsize + DDC2->features.vsize) * 10; - default: - break; - } - - } else if(DDC1 && (DDC1->features.hsize > 0 && DDC1->features.vsize > 0)) { - ddcWidthmm = DDC1->features.hsize * 10; - ddcHeightmm = DDC1->features.vsize * 10; - switch(srel) { - case radeonLeftOf: - case radeonRightOf: - ddcWidthmm *= 2; - break; - case radeonAbove: - case radeonBelow: - ddcHeightmm *= 2; - default: - break; - } - } else if(DDC2 && (DDC2->features.hsize > 0 && DDC2->features.vsize > 0) ) { - ddcWidthmm = DDC2->features.hsize * 10; - ddcHeightmm = DDC2->features.vsize * 10; - switch(srel) { - case radeonLeftOf: - case radeonRightOf: - ddcWidthmm *= 2; - break; - case radeonAbove: - case radeonBelow: - ddcHeightmm *= 2; - default: - break; - } - } - - if(monitorResolution > 0) { - - /* Set command line given values (overrules given options) */ - pScrn1->xDpi = monitorResolution; - pScrn1->yDpi = monitorResolution; - from = X_CMDLINE; - - } else if(info->MergedFBXDPI) { - - /* Set option-wise given values (overrule DisplaySize) */ - pScrn1->xDpi = info->MergedFBXDPI; - pScrn1->yDpi = info->MergedFBYDPI; - from = X_CONFIG; - - } else if(pScrn1->widthmm > 0 || pScrn1->heightmm > 0) { - - /* Set values calculated from given DisplaySize */ - from = X_CONFIG; - if(pScrn1->widthmm > 0) { - pScrn1->xDpi = (int)((double)pScrn1->virtualX * 25.4 / pScrn1->widthmm); - } - if(pScrn1->heightmm > 0) { - pScrn1->yDpi = (int)((double)pScrn1->virtualY * 25.4 / pScrn1->heightmm); - } - xf86DrvMsg(pScrn1->scrnIndex, from, dsstr, pScrn1->widthmm, pScrn1->heightmm); - - } else if(ddcWidthmm && ddcHeightmm) { - - /* Set values from DDC-provided display size */ - from = X_PROBED; - xf86DrvMsg(pScrn1->scrnIndex, from, dsstr, ddcWidthmm, ddcHeightmm ); - pScrn1->widthmm = ddcWidthmm; - pScrn1->heightmm = ddcHeightmm; - if(pScrn1->widthmm > 0) { - pScrn1->xDpi = (int)((double)pScrn1->virtualX * 25.4 / pScrn1->widthmm); - } - if(pScrn1->heightmm > 0) { - pScrn1->yDpi = (int)((double)pScrn1->virtualY * 25.4 / pScrn1->heightmm); - } - - } else { - - pScrn1->xDpi = pScrn1->yDpi = DEFAULT_DPI; - - } - - /* Sanity check */ - if(pScrn1->xDpi > 0 && pScrn1->yDpi <= 0) - pScrn1->yDpi = pScrn1->xDpi; - if(pScrn1->yDpi > 0 && pScrn1->xDpi <= 0) - pScrn1->xDpi = pScrn1->yDpi; - - pScrn2->xDpi = pScrn1->xDpi; - pScrn2->yDpi = pScrn1->yDpi; - - xf86DrvMsg(pScrn1->scrnIndex, from, "MergedFB: DPI set to (%d, %d)\n", - pScrn1->xDpi, pScrn1->yDpi); -} - -/* radeon cursor helpers */ -static void -RADEONChooseCursorCRTC(ScrnInfoPtr pScrn1, int x, int y) -{ - RADEONInfoPtr info = RADEONPTR(pScrn1); - unsigned char *RADEONMMIO = info->MMIO; - RADEONScrn2Rel srel = - ((RADEONMergedDisplayModePtr)info->CurrentLayout.mode->Private)->CRT2Position; - ScrnInfoPtr pScrn2 = info->CRT2pScrn; - - if (srel == radeonClone) { - /* show cursor 2 */ - OUTREGP(RADEON_CRTC2_GEN_CNTL, RADEON_CRTC2_CUR_EN, - ~RADEON_CRTC2_CUR_EN); - /* show cursor 1 */ - OUTREGP(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_CUR_EN, - ~RADEON_CRTC_CUR_EN); - } - else { - if (((x >= pScrn1->frameX0) && (x <= pScrn1->frameX1)) && - ((y >= pScrn1->frameY0) && (y <= pScrn1->frameY1))) { - /* hide cursor 2 */ - OUTREGP(RADEON_CRTC2_GEN_CNTL, 0, ~RADEON_CRTC2_CUR_EN); - /* show cursor 1 */ - OUTREGP(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_CUR_EN, - ~RADEON_CRTC_CUR_EN); - } - if (((x >= pScrn2->frameX0) && (x <= pScrn2->frameX1)) && - ((y >= pScrn2->frameY0) && (y <= pScrn2->frameY1))) { - /* hide cursor 1 */ - OUTREGP(RADEON_CRTC_GEN_CNTL, 0, ~RADEON_CRTC_CUR_EN); - /* show cursor 2 */ - OUTREGP(RADEON_CRTC2_GEN_CNTL, RADEON_CRTC2_CUR_EN, - ~RADEON_CRTC2_CUR_EN); - } - } -} - -void -RADEONSetCursorPositionMerged(ScrnInfoPtr pScrn, int x, int y) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - xf86CursorInfoPtr cursor = info->cursor; - int xorigin = 0; - int yorigin = 0; - int stride = 256; - ScrnInfoPtr pScrn2 = info->CRT2pScrn; - DisplayModePtr mode1 = CDMPTR->CRT1; - DisplayModePtr mode2 = CDMPTR->CRT2; - int x1, y1, x2, y2; - int total_y1 = pScrn->frameY1 - pScrn->frameY0; - int total_y2 = pScrn2->frameY1 - pScrn2->frameY0; - - if (x < 0) xorigin = -x+1; - if (y < 0) yorigin = -y+1; - /* if (y > total_y) y = total_y; */ - if (xorigin >= cursor->MaxWidth) xorigin = cursor->MaxWidth - 1; - if (yorigin >= cursor->MaxHeight) yorigin = cursor->MaxHeight - 1; - - x += pScrn->frameX0; - y += pScrn->frameY0; - - x1 = x - info->CRT1frameX0; - y1 = y - info->CRT1frameY0; - - x2 = x - pScrn2->frameX0; - y2 = y - pScrn2->frameY0; - - if (y1 > total_y1) - y1 = total_y1; - if (y2 > total_y2) - y2 = total_y2; - - if(mode1->Flags & V_INTERLACE) - y1 /= 2; - else if(mode1->Flags & V_DBLSCAN) - y1 *= 2; - - if(mode2->Flags & V_INTERLACE) - y2 /= 2; - else if(mode2->Flags & V_DBLSCAN) - y2 *= 2; - - if (x < 0) - x = 0; - if (y < 0) - y = 0; - - RADEONChooseCursorCRTC(pScrn, x, y); - - /* cursor1 */ - OUTREG(RADEON_CUR_HORZ_VERT_OFF, (RADEON_CUR_LOCK - | (xorigin << 16) - | yorigin)); - OUTREG(RADEON_CUR_HORZ_VERT_POSN, (RADEON_CUR_LOCK - | ((xorigin ? 0 : x1) << 16) - | (yorigin ? 0 : y1))); - OUTREG(RADEON_CUR_OFFSET, info->cursor_start + yorigin * stride); - /* cursor2 */ - OUTREG(RADEON_CUR2_HORZ_VERT_OFF, (RADEON_CUR2_LOCK - | (xorigin << 16) - | yorigin)); - OUTREG(RADEON_CUR2_HORZ_VERT_POSN, (RADEON_CUR2_LOCK - | ((xorigin ? 0 : x2) << 16) - | (yorigin ? 0 : y2))); - OUTREG(RADEON_CUR2_OFFSET, - info->cursor_start + yorigin * stride); - -} - -/* radeon Xv helpers */ - -/* choose the crtc for the overlay for mergedfb based on the location - of the output window and the orientation of the crtcs */ - -void -RADEONChooseOverlayCRTC( - ScrnInfoPtr pScrn, - BoxPtr dstBox -) { - RADEONInfoPtr info = RADEONPTR(pScrn); - RADEONScrn2Rel srel = - ((RADEONMergedDisplayModePtr)info->CurrentLayout.mode->Private)->CRT2Position; - - if (srel == radeonLeftOf) { - if (dstBox->x1 >= info->CRT2pScrn->frameX1) - info->OverlayOnCRTC2 = FALSE; - else - info->OverlayOnCRTC2 = TRUE; - } - if (srel == radeonRightOf) { - if (dstBox->x2 <= info->CRT2pScrn->frameX0) - info->OverlayOnCRTC2 = FALSE; - else - info->OverlayOnCRTC2 = TRUE; - } - if (srel == radeonAbove) { - if (dstBox->y1 >= info->CRT2pScrn->frameY1) - info->OverlayOnCRTC2 = FALSE; - else - info->OverlayOnCRTC2 = TRUE; - } - if (srel == radeonBelow) { - if (dstBox->y2 <= info->CRT2pScrn->frameY0) - info->OverlayOnCRTC2 = FALSE; - else - info->OverlayOnCRTC2 = TRUE; - } -} diff --git a/src/radeon_mergedfb.h b/src/radeon_mergedfb.h deleted file mode 100644 index e51ce5c4..00000000 --- a/src/radeon_mergedfb.h +++ /dev/null @@ -1,124 +0,0 @@ -/* $XFree86$ */ -/* - * Copyright 2003 Alex Deucher. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ALEX DEUCHER, OR ANY OTHER - * CONTRIBUTORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Alex Deucher <agd5f@yahoo.com> - * - */ - -#ifndef _RADEON_MERGEDFB_H_ -#define _RADEON_MERGEDFB_H_ - -#include "xf86.h" - -#include "radeon.h" - -#if 0 - /* Psuedo Xinerama support */ -#define NEED_REPLIES /* ? */ -#define EXTENSION_PROC_ARGS void * -#include "extnsionst.h" /* required */ -#include "panoramiXproto.h" /* required */ -#define RADEON_XINERAMA_MAJOR_VERSION 1 -#define RADEON_XINERAMA_MINOR_VERSION 1 - -/* needed for pseudo-xinerama by radeon_driver.c */ -Bool RADEONnoPanoramiXExtension = TRUE; - -/* Relative merge position */ -typedef enum { - radeonLeftOf, - radeonRightOf, - radeonAbove, - radeonBelow, - radeonClone -} RADEONScrn2Rel; -#endif - -#define SDMPTR(x) ((RADEONMergedDisplayModePtr)(x->currentMode->Private)) -#define CDMPTR ((RADEONMergedDisplayModePtr)(info->CurrentLayout.mode->Private)) - -#define BOUND(test,low,hi) { \ - if(test < low) test = low; \ - if(test > hi) test = hi; } - -#define REBOUND(low,hi,test) { \ - if(test < low) { \ - hi += test-low; \ - low = test; } \ - if(test > hi) { \ - low += test-hi; \ - hi = test; } } - -typedef struct _MergedDisplayModeRec { - DisplayModePtr CRT1; - DisplayModePtr CRT2; - RADEONScrn2Rel CRT2Position; -} RADEONMergedDisplayModeRec, *RADEONMergedDisplayModePtr; - -typedef struct _region { - int x0,x1,y0,y1; -} region; - -typedef struct _RADEONXineramaData { - int x; - int y; - int width; - int height; -} RADEONXineramaData; - -/* needed by radeon_driver.c */ -extern void -RADEONAdjustFrameMerged(int scrnIndex, int x, int y, int flags); -extern void -RADEONMergePointerMoved(int scrnIndex, int x, int y); -extern DisplayModePtr -RADEONGenerateModeList(ScrnInfoPtr pScrn, char* str, - DisplayModePtr i, DisplayModePtr j, - RADEONScrn2Rel srel); -extern int -RADEONStrToRanges(range *r, char *s, int max); -extern void -RADEONXineramaExtensionInit(ScrnInfoPtr pScrn); -extern void -RADEONUpdateXineramaScreenInfo(ScrnInfoPtr pScrn1); -extern void -RADEONMergedFBSetDpi(ScrnInfoPtr pScrn1, ScrnInfoPtr pScrn2, RADEONScrn2Rel srel); -extern void -RADEONRecalcDefaultVirtualSize(ScrnInfoPtr pScrn); - -/* needed by radeon_cursor.c */ -extern void -RADEONSetCursorPositionMerged(ScrnInfoPtr pScrn, int x, int y); - -/* needed by radeon_video.c */ -extern void -RADEONChooseOverlayCRTC(ScrnInfoPtr, BoxPtr); - -#endif /* _RADEON_MERGEDFB_H_ */ diff --git a/src/radeon_misc.c b/src/radeon_misc.c deleted file mode 100644 index d9c978fe..00000000 --- a/src/radeon_misc.c +++ /dev/null @@ -1,86 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_misc.c,v 1.7 2003/01/01 19:16:35 tsi Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifdef XFree86LOADER - -#include "ativersion.h" - -#include "radeon_probe.h" -#include "radeon_version.h" - -#include "xf86.h" - -/* Module loader interface for subsidiary driver module */ - -static XF86ModuleVersionInfo RADEONVersionRec = -{ - RADEON_DRIVER_NAME, - MODULEVENDORSTRING, - MODINFOSTRING1, - MODINFOSTRING2, - XF86_VERSION_CURRENT, - RADEON_VERSION_MAJOR, RADEON_VERSION_MINOR, RADEON_VERSION_PATCH, - ABI_CLASS_VIDEODRV, - ABI_VIDEODRV_VERSION, - MOD_CLASS_VIDEODRV, - {0, 0, 0, 0} -}; - -/* - * RADEONSetup -- - * - * This function is called every time the module is loaded. - */ -static pointer -RADEONSetup -( - pointer Module, - pointer Options, - int *ErrorMajor, - int *ErrorMinor -) -{ - static Bool Inited = FALSE; - - if (!Inited) { - /* Ensure main driver module is loaded, but not as a submodule */ - if (!xf86ServerIsOnlyDetecting() && !LoaderSymbol(ATI_NAME)) - xf86LoadOneModule(ATI_DRIVER_NAME, Options); - - RADEONLoaderRefSymLists(); - - Inited = TRUE; - } - - return (pointer)TRUE; -} - -/* The following record must be called radeonModuleData */ -XF86ModuleData radeonModuleData = -{ - &RADEONVersionRec, - RADEONSetup, - NULL -}; - -#endif /* XFree86LOADER */ diff --git a/src/radeon_probe.c b/src/radeon_probe.c deleted file mode 100644 index adb336ab..00000000 --- a/src/radeon_probe.c +++ /dev/null @@ -1,380 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_probe.c,v 1.30 2003/10/07 22:47:12 martin Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * Rickard E. Faith <faith@valinux.com> - * - * Modified by Marc Aurele La France <tsi@xfree86.org> for ATI driver merge. - */ - -#include "atimodule.h" -#include "ativersion.h" - -#include "radeon_probe.h" -#include "radeon_version.h" - -#include "xf86PciInfo.h" - -#include "xf86.h" -#include "xf86_ansic.h" -#define _XF86MISC_SERVER_ -#include "xf86misc.h" -#include "xf86Resources.h" - -#ifdef XFree86LOADER - -/* - * The following exists to prevent the compiler from considering entry points - * defined in a separate module from being constants. - */ -static xf86PreInitProc *const volatile PreInitProc = RADEONPreInit; -static xf86ScreenInitProc *const volatile ScreenInitProc = RADEONScreenInit; -static xf86SwitchModeProc *const volatile SwitchModeProc = RADEONSwitchMode; -static xf86AdjustFrameProc *const volatile AdjustFrameProc = RADEONAdjustFrame; -static xf86EnterVTProc *const volatile EnterVTProc = RADEONEnterVT; -static xf86LeaveVTProc *const volatile LeaveVTProc = RADEONLeaveVT; -static xf86FreeScreenProc *const volatile FreeScreenProc = RADEONFreeScreen; -static xf86ValidModeProc *const volatile ValidModeProc = RADEONValidMode; -#ifdef X_XF86MiscPassMessage -static xf86HandleMessageProc *const volatile HandleMessageProc - = RADEONHandleMessage; -#endif - -#define RADEONPreInit PreInitProc -#define RADEONScreenInit ScreenInitProc -#define RADEONSwitchMode SwitchModeProc -#define RADEONAdjustFrame AdjustFrameProc -#define RADEONEnterVT EnterVTProc -#define RADEONLeaveVT LeaveVTProc -#define RADEONFreeScreen FreeScreenProc -#define RADEONValidMode ValidModeProc -#ifdef X_XF86MiscPassMessage -# define RADEONHandleMessage HandleMessageProc -#endif - -#endif - -SymTabRec RADEONChipsets[] = { - { PCI_CHIP_RADEON_QD, "ATI Radeon QD (AGP)" }, - { PCI_CHIP_RADEON_QE, "ATI Radeon QE (AGP)" }, - { PCI_CHIP_RADEON_QF, "ATI Radeon QF (AGP)" }, - { PCI_CHIP_RADEON_QG, "ATI Radeon QG (AGP)" }, - { PCI_CHIP_RV100_QY, "ATI Radeon VE/7000 QY (AGP/PCI)" }, - { PCI_CHIP_RV100_QZ, "ATI Radeon VE/7000 QZ (AGP/PCI)" }, - { PCI_CHIP_RADEON_LW, "ATI Radeon Mobility M7 LW (AGP)" }, - { PCI_CHIP_RADEON_LX, "ATI Mobility FireGL 7800 M7 LX (AGP)" }, - { PCI_CHIP_RADEON_LY, "ATI Radeon Mobility M6 LY (AGP)" }, - { PCI_CHIP_RADEON_LZ, "ATI Radeon Mobility M6 LZ (AGP)" }, - { PCI_CHIP_RS100_4136, "ATI Radeon IGP320 (A3) 4136" }, - { PCI_CHIP_RS100_4336, "ATI Radeon IGP320M (U1) 4336" }, - { PCI_CHIP_RS200_4137, "ATI Radeon IGP330/340/350 (A4) 4137" }, - { PCI_CHIP_RS200_4337, "ATI Radeon IGP330M/340M/350M (U2) 4337" }, - { PCI_CHIP_RS250_4237, "ATI Radeon 7000 IGP (A4+) 4237" }, - { PCI_CHIP_RS250_4437, "ATI Radeon Mobility 7000 IGP 4437" }, - { PCI_CHIP_R200_QH, "ATI FireGL 8700/8800 QH (AGP)" }, - { PCI_CHIP_R200_QL, "ATI Radeon 8500 QL (AGP)" }, - { PCI_CHIP_R200_QM, "ATI Radeon 9100 QM (AGP)" }, - { PCI_CHIP_R200_BB, "ATI Radeon 8500 AIW BB (AGP)" }, - { PCI_CHIP_R200_BC, "ATI Radeon 8500 AIW BC (AGP)" }, - { PCI_CHIP_RV200_QW, "ATI Radeon 7500 QW (AGP/PCI)" }, - { PCI_CHIP_RV200_QX, "ATI Radeon 7500 QX (AGP/PCI)" }, - { PCI_CHIP_RV250_If, "ATI Radeon 9000/PRO If (AGP/PCI)" }, - { PCI_CHIP_RV250_Ig, "ATI Radeon 9000 Ig (AGP/PCI)" }, - { PCI_CHIP_RV250_Ld, "ATI FireGL Mobility 9000 (M9) Ld (AGP)" }, - { PCI_CHIP_RV250_Lf, "ATI Radeon Mobility 9000 (M9) Lf (AGP)" }, - { PCI_CHIP_RV250_Lg, "ATI Radeon Mobility 9000 (M9) Lg (AGP)" }, - { PCI_CHIP_RS300_5834, "ATI Radeon 9100 IGP (A5) 5834" }, - { PCI_CHIP_RS300_5835, "ATI Radeon Mobility 9100 IGP (U3) 5835" }, - { PCI_CHIP_RV280_5960, "ATI Radeon 9200PRO 5960 (AGP)" }, - { PCI_CHIP_RV280_5961, "ATI Radeon 9200 5961 (AGP)" }, - { PCI_CHIP_RV280_5962, "ATI Radeon 9200 5962 (AGP)" }, - { PCI_CHIP_RV280_5964, "ATI Radeon 9200SE 5964 (AGP)" }, - { PCI_CHIP_RV280_5C61, "ATI Radeon Mobility 9200 (M9+) 5C61 (AGP)" }, - { PCI_CHIP_RV280_5C63, "ATI Radeon Mobility 9200 (M9+) 5C63 (AGP)" }, - { PCI_CHIP_R300_AD, "ATI Radeon 9500 AD (AGP)" }, - { PCI_CHIP_R300_AE, "ATI Radeon 9500 AE (AGP)" }, - { PCI_CHIP_R300_AF, "ATI Radeon 9600TX AF (AGP)" }, - { PCI_CHIP_R300_AG, "ATI FireGL Z1 AG (AGP)" }, - { PCI_CHIP_R300_ND, "ATI Radeon 9700 Pro ND (AGP)" }, - { PCI_CHIP_R300_NE, "ATI Radeon 9700/9500Pro NE (AGP)" }, - { PCI_CHIP_R300_NF, "ATI Radeon 9700 NF (AGP)" }, - { PCI_CHIP_R300_NG, "ATI FireGL X1 NG (AGP)" }, - { PCI_CHIP_RV350_AP, "ATI Radeon 9600 AP (AGP)" }, - { PCI_CHIP_RV350_AQ, "ATI Radeon 9600SE AQ (AGP)" }, - { PCI_CHIP_RV360_AR, "ATI Radeon 9600XT AR (AGP)" }, - { PCI_CHIP_RV350_AS, "ATI Radeon 9600 AS (AGP)" }, - { PCI_CHIP_RV350_AT, "ATI FireGL T2 AT (AGP)" }, - { PCI_CHIP_RV350_AV, "ATI FireGL RV360 AV (AGP)" }, - { PCI_CHIP_RV350_NP, "ATI Radeon Mobility 9600 (M10) NP (AGP)" }, - { PCI_CHIP_RV350_NQ, "ATI Radeon Mobility 9600 (M10) NQ (AGP)" }, - { PCI_CHIP_RV350_NR, "ATI Radeon Mobility 9600 (M11) NR (AGP)" }, - { PCI_CHIP_RV350_NS, "ATI Radeon Mobility 9600 (M10) NS (AGP)" }, - { PCI_CHIP_RV350_NT, "ATI FireGL Mobility T2 (M10) NT (AGP)" }, - { PCI_CHIP_RV350_NV, "ATI FireGL Mobility T2 (M11) NV (AGP)" }, - { PCI_CHIP_R350_AH, "ATI Radeon 9800SE AH (AGP)" }, - { PCI_CHIP_R350_AI, "ATI Radeon 9800 AI (AGP)" }, - { PCI_CHIP_R350_AJ, "ATI Radeon 9800 AJ (AGP)" }, - { PCI_CHIP_R350_AK, "ATI FireGL X2 AK (AGP)" }, - { PCI_CHIP_R350_NH, "ATI Radeon 9800PRO NH (AGP)" }, - { PCI_CHIP_R350_NI, "ATI Radeon 9800 NI (AGP)" }, - { PCI_CHIP_R350_NK, "ATI FireGL X2 NK (AGP)" }, - { PCI_CHIP_R360_NJ, "ATI Radeon 9800XT NJ (AGP)" }, - { -1, NULL } -}; - -PciChipsets RADEONPciChipsets[] = { - { PCI_CHIP_RADEON_QD, PCI_CHIP_RADEON_QD, RES_SHARED_VGA }, - { PCI_CHIP_RADEON_QE, PCI_CHIP_RADEON_QE, RES_SHARED_VGA }, - { PCI_CHIP_RADEON_QF, PCI_CHIP_RADEON_QF, RES_SHARED_VGA }, - { PCI_CHIP_RADEON_QG, PCI_CHIP_RADEON_QG, RES_SHARED_VGA }, - { PCI_CHIP_RV100_QY, PCI_CHIP_RV100_QY, RES_SHARED_VGA }, - { PCI_CHIP_RV100_QZ, PCI_CHIP_RV100_QZ, RES_SHARED_VGA }, - { PCI_CHIP_RADEON_LW, PCI_CHIP_RADEON_LW, RES_SHARED_VGA }, - { PCI_CHIP_RADEON_LX, PCI_CHIP_RADEON_LX, RES_SHARED_VGA }, - { PCI_CHIP_RADEON_LY, PCI_CHIP_RADEON_LY, RES_SHARED_VGA }, - { PCI_CHIP_RADEON_LZ, PCI_CHIP_RADEON_LZ, RES_SHARED_VGA }, - { PCI_CHIP_RS100_4136, PCI_CHIP_RS100_4136, RES_SHARED_VGA }, - { PCI_CHIP_RS100_4336, PCI_CHIP_RS100_4336, RES_SHARED_VGA }, - { PCI_CHIP_RS200_4137, PCI_CHIP_RS200_4137, RES_SHARED_VGA }, - { PCI_CHIP_RS200_4337, PCI_CHIP_RS200_4337, RES_SHARED_VGA }, - { PCI_CHIP_RS250_4237, PCI_CHIP_RS250_4237, RES_SHARED_VGA }, - { PCI_CHIP_RS250_4437, PCI_CHIP_RS250_4437, RES_SHARED_VGA }, - { PCI_CHIP_R200_QH, PCI_CHIP_R200_QH, RES_SHARED_VGA }, - { PCI_CHIP_R200_QL, PCI_CHIP_R200_QL, RES_SHARED_VGA }, - { PCI_CHIP_R200_QM, PCI_CHIP_R200_QM, RES_SHARED_VGA }, - { PCI_CHIP_R200_BB, PCI_CHIP_R200_BB, RES_SHARED_VGA }, - { PCI_CHIP_R200_BC, PCI_CHIP_R200_BC, RES_SHARED_VGA }, - { PCI_CHIP_RV200_QW, PCI_CHIP_RV200_QW, RES_SHARED_VGA }, - { PCI_CHIP_RV200_QX, PCI_CHIP_RV200_QX, RES_SHARED_VGA }, - { PCI_CHIP_RV250_If, PCI_CHIP_RV250_If, RES_SHARED_VGA }, - { PCI_CHIP_RV250_Ig, PCI_CHIP_RV250_Ig, RES_SHARED_VGA }, - { PCI_CHIP_RV250_Ld, PCI_CHIP_RV250_Ld, RES_SHARED_VGA }, - { PCI_CHIP_RV250_Lf, PCI_CHIP_RV250_Lf, RES_SHARED_VGA }, - { PCI_CHIP_RV250_Lg, PCI_CHIP_RV250_Lg, RES_SHARED_VGA }, - { PCI_CHIP_RS300_5834, PCI_CHIP_RS300_5834, RES_SHARED_VGA }, - { PCI_CHIP_RS300_5835, PCI_CHIP_RS300_5835, RES_SHARED_VGA }, - { PCI_CHIP_RV280_5960, PCI_CHIP_RV280_5960, RES_SHARED_VGA }, - { PCI_CHIP_RV280_5961, PCI_CHIP_RV280_5961, RES_SHARED_VGA }, - { PCI_CHIP_RV280_5962, PCI_CHIP_RV280_5962, RES_SHARED_VGA }, - { PCI_CHIP_RV280_5964, PCI_CHIP_RV280_5964, RES_SHARED_VGA }, - { PCI_CHIP_RV280_5C61, PCI_CHIP_RV280_5C61, RES_SHARED_VGA }, - { PCI_CHIP_RV280_5C63, PCI_CHIP_RV280_5C63, RES_SHARED_VGA }, - { PCI_CHIP_R300_AD, PCI_CHIP_R300_AD, RES_SHARED_VGA }, - { PCI_CHIP_R300_AE, PCI_CHIP_R300_AE, RES_SHARED_VGA }, - { PCI_CHIP_R300_AF, PCI_CHIP_R300_AF, RES_SHARED_VGA }, - { PCI_CHIP_R300_AG, PCI_CHIP_R300_AG, RES_SHARED_VGA }, - { PCI_CHIP_R300_ND, PCI_CHIP_R300_ND, RES_SHARED_VGA }, - { PCI_CHIP_R300_NE, PCI_CHIP_R300_NE, RES_SHARED_VGA }, - { PCI_CHIP_R300_NF, PCI_CHIP_R300_NF, RES_SHARED_VGA }, - { PCI_CHIP_R300_NG, PCI_CHIP_R300_NG, RES_SHARED_VGA }, - { PCI_CHIP_RV350_AP, PCI_CHIP_RV350_AP, RES_SHARED_VGA }, - { PCI_CHIP_RV350_AQ, PCI_CHIP_RV350_AQ, RES_SHARED_VGA }, - { PCI_CHIP_RV360_AR, PCI_CHIP_RV360_AR, RES_SHARED_VGA }, - { PCI_CHIP_RV350_AS, PCI_CHIP_RV350_AS, RES_SHARED_VGA }, - { PCI_CHIP_RV350_AT, PCI_CHIP_RV350_AT, RES_SHARED_VGA }, - { PCI_CHIP_RV350_AV, PCI_CHIP_RV350_AV, RES_SHARED_VGA }, - { PCI_CHIP_RV350_NP, PCI_CHIP_RV350_NP, RES_SHARED_VGA }, - { PCI_CHIP_RV350_NQ, PCI_CHIP_RV350_NQ, RES_SHARED_VGA }, - { PCI_CHIP_RV350_NR, PCI_CHIP_RV350_NR, RES_SHARED_VGA }, - { PCI_CHIP_RV350_NS, PCI_CHIP_RV350_NS, RES_SHARED_VGA }, - { PCI_CHIP_RV350_NT, PCI_CHIP_RV350_NT, RES_SHARED_VGA }, - { PCI_CHIP_RV350_NV, PCI_CHIP_RV350_NV, RES_SHARED_VGA }, - { PCI_CHIP_R350_AH, PCI_CHIP_R350_AH, RES_SHARED_VGA }, - { PCI_CHIP_R350_AI, PCI_CHIP_R350_AI, RES_SHARED_VGA }, - { PCI_CHIP_R350_AJ, PCI_CHIP_R350_AJ, RES_SHARED_VGA }, - { PCI_CHIP_R350_AK, PCI_CHIP_R350_AK, RES_SHARED_VGA }, - { PCI_CHIP_R350_NH, PCI_CHIP_R350_NH, RES_SHARED_VGA }, - { PCI_CHIP_R350_NI, PCI_CHIP_R350_NI, RES_SHARED_VGA }, - { PCI_CHIP_R350_NK, PCI_CHIP_R350_NK, RES_SHARED_VGA }, - { PCI_CHIP_R360_NJ, PCI_CHIP_R360_NJ, RES_SHARED_VGA }, - { -1, -1, RES_UNDEFINED } -}; - -int gRADEONEntityIndex = -1; - -/* Return the options for supported chipset 'n'; NULL otherwise */ -const OptionInfoRec * -RADEONAvailableOptions(int chipid, int busid) -{ - int i; - - /* - * Return options defined in the radeon submodule which will have been - * loaded by this point. - */ - if ((chipid >> 16) == PCI_VENDOR_ATI) - chipid -= PCI_VENDOR_ATI << 16; - for (i = 0; RADEONPciChipsets[i].PCIid > 0; i++) { - if (chipid == RADEONPciChipsets[i].PCIid) - return RADEONOptions; - } - return NULL; -} - -/* Return the string name for supported chipset 'n'; NULL otherwise. */ -void -RADEONIdentify(int flags) -{ - xf86PrintChipsets(RADEON_NAME, - "Driver for ATI Radeon chipsets", - RADEONChipsets); -} - -/* Return TRUE if chipset is present; FALSE otherwise. */ -Bool -RADEONProbe(DriverPtr drv, int flags) -{ - int numUsed; - int numDevSections, nATIGDev, nRadeonGDev; - int *usedChips; - GDevPtr *devSections, *ATIGDevs, *RadeonGDevs; - Bool foundScreen = FALSE; - int i; - - if (!xf86GetPciVideoInfo()) return FALSE; - - /* Collect unclaimed device sections for both driver names */ - nATIGDev = xf86MatchDevice(ATI_NAME, &ATIGDevs); - nRadeonGDev = xf86MatchDevice(RADEON_NAME, &RadeonGDevs); - - if (!(numDevSections = nATIGDev + nRadeonGDev)) return FALSE; - - if (!ATIGDevs) { - if (!(devSections = RadeonGDevs)) numDevSections = 1; - else numDevSections = nRadeonGDev; - } if (!RadeonGDevs) { - devSections = ATIGDevs; - numDevSections = nATIGDev; - } else { - /* Combine into one list */ - devSections = xnfalloc((numDevSections + 1) * sizeof(GDevPtr)); - (void)memcpy(devSections, - ATIGDevs, nATIGDev * sizeof(GDevPtr)); - (void)memcpy(devSections + nATIGDev, - RadeonGDevs, nRadeonGDev * sizeof(GDevPtr)); - devSections[numDevSections] = NULL; - xfree(ATIGDevs); - xfree(RadeonGDevs); - } - - numUsed = xf86MatchPciInstances(RADEON_NAME, - PCI_VENDOR_ATI, - RADEONChipsets, - RADEONPciChipsets, - devSections, - numDevSections, - drv, - &usedChips); - - if (numUsed <= 0) return FALSE; - - if (flags & PROBE_DETECT) { - foundScreen = TRUE; - } else { - for (i = 0; i < numUsed; i++) { - ScrnInfoPtr pScrn = NULL; - EntityInfoPtr pEnt; - pEnt = xf86GetEntityInfo(usedChips[i]); - if ((pScrn = xf86ConfigPciEntity(pScrn, 0, usedChips[i], - RADEONPciChipsets, 0, 0, 0, - 0, 0))) { -#ifdef XFree86LOADER - if (!xf86LoadSubModule(pScrn, "radeon")) { - xf86Msg(X_ERROR, RADEON_NAME - ": Failed to load \"radeon\" module.\n"); - xf86DeleteScreen(pScrn->scrnIndex, 0); - continue; - } - - xf86LoaderReqSymLists(RADEONSymbols, NULL); -#endif - - pScrn->driverVersion = RADEON_VERSION_CURRENT; - pScrn->driverName = RADEON_DRIVER_NAME; - pScrn->name = RADEON_NAME; - pScrn->Probe = RADEONProbe; - pScrn->PreInit = RADEONPreInit; - pScrn->ScreenInit = RADEONScreenInit; - pScrn->SwitchMode = RADEONSwitchMode; -#ifdef X_XF86MiscPassMessage - pScrn->HandleMessage = RADEONHandleMessage; -#endif - pScrn->AdjustFrame = RADEONAdjustFrame; - pScrn->EnterVT = RADEONEnterVT; - pScrn->LeaveVT = RADEONLeaveVT; - pScrn->FreeScreen = RADEONFreeScreen; - pScrn->ValidMode = RADEONValidMode; - foundScreen = TRUE; - } - - pEnt = xf86GetEntityInfo(usedChips[i]); - - /* create a RADEONEntity for all chips, even with - old single head Radeon, need to use pRADEONEnt - for new monitor detection routines - */ - { - DevUnion *pPriv; - RADEONEntPtr pRADEONEnt; - - xf86SetEntitySharable(usedChips[i]); - - if (gRADEONEntityIndex == -1) - gRADEONEntityIndex = xf86AllocateEntityPrivateIndex(); - - pPriv = xf86GetEntityPrivate(pEnt->index, - gRADEONEntityIndex); - - if (!pPriv->ptr) { - int j; - int instance = xf86GetNumEntityInstances(pEnt->index); - - for (j = 0; j < instance; j++) - xf86SetEntityInstanceForScreen(pScrn, pEnt->index, j); - - pPriv->ptr = xnfcalloc(sizeof(RADEONEntRec), 1); - pRADEONEnt = pPriv->ptr; - pRADEONEnt->HasSecondary = FALSE; - pRADEONEnt->IsSecondaryRestored = FALSE; - } else { - pRADEONEnt = pPriv->ptr; - pRADEONEnt->HasSecondary = TRUE; - } - } - xfree(pEnt); - } - } - - xfree(usedChips); - xfree(devSections); - - return foundScreen; -} diff --git a/src/radeon_probe.h b/src/radeon_probe.h deleted file mode 100644 index 77d7e86c..00000000 --- a/src/radeon_probe.h +++ /dev/null @@ -1,109 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_probe.h,v 1.11 2003/07/02 17:31:30 martin Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * - * Modified by Marc Aurele La France <tsi@xfree86.org> for ATI driver merge. - */ - -#ifndef _RADEON_PROBE_H_ -#define _RADEON_PROBE_H_ 1 - -#include "atiproto.h" - -#include "xf86str.h" -#include "xf86DDC.h" - -#define _XF86MISC_SERVER_ -#include "xf86misc.h" - -typedef struct -{ - Bool HasSecondary; - - /* - * The next two are used to make sure CRTC2 is restored before CRTC_EXT, - * otherwise it could lead to blank screens. - */ - Bool IsSecondaryRestored; - Bool RestorePrimary; - - ScrnInfoPtr pSecondaryScrn; - ScrnInfoPtr pPrimaryScrn; - - int MonType1; - int MonType2; - xf86MonPtr MonInfo1; - xf86MonPtr MonInfo2; - Bool ReversedDAC; /* TVDAC used as primary dac */ - Bool ReversedTMDS; /* DDC_DVI is used for external TMDS */ -} RADEONEntRec, *RADEONEntPtr; - -/* radeon_probe.c */ -extern const OptionInfoRec *RADEONAvailableOptions - FunctionPrototype((int, int)); -extern void RADEONIdentify - FunctionPrototype((int)); -extern Bool RADEONProbe - FunctionPrototype((DriverPtr, int)); - -extern SymTabRec RADEONChipsets[]; -extern PciChipsets RADEONPciChipsets[]; - -/* radeon_driver.c */ -extern void RADEONLoaderRefSymLists - FunctionPrototype((void)); -extern Bool RADEONPreInit - FunctionPrototype((ScrnInfoPtr, int)); -extern Bool RADEONScreenInit - FunctionPrototype((int, ScreenPtr, int, char **)); -extern Bool RADEONSwitchMode - FunctionPrototype((int, DisplayModePtr, int)); -#ifdef X_XF86MiscPassMessage -extern Bool RADEONHandleMessage - FunctionPrototype((int, const char*, const char*, - char**)); -#endif -extern void RADEONAdjustFrame - FunctionPrototype((int, int, int, int)); -extern Bool RADEONEnterVT - FunctionPrototype((int, int)); -extern void RADEONLeaveVT - FunctionPrototype((int, int)); -extern void RADEONFreeScreen - FunctionPrototype((int, int)); -extern int RADEONValidMode - FunctionPrototype((int, DisplayModePtr, Bool, - int)); - -extern const OptionInfoRec RADEONOptions[]; - -#endif /* _RADEON_PROBE_H_ */ diff --git a/src/radeon_reg.h b/src/radeon_reg.h deleted file mode 100644 index 4bd4d14e..00000000 --- a/src/radeon_reg.h +++ /dev/null @@ -1,2113 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_reg.h,v 1.30 2003/10/07 22:47:12 martin Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * Rickard E. Faith <faith@valinux.com> - * Alan Hourihane <alanh@fairlite.demon.co.uk> - * - * References: - * - * !!!! FIXME !!!! - * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical - * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April - * 1999. - * - * !!!! FIXME !!!! - * RAGE 128 Software Development Manual (Technical Reference Manual P/N - * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. - * - */ - -/* !!!! FIXME !!!! NOTE: THIS FILE HAS BEEN CONVERTED FROM r128_reg.h - * AND CONTAINS REGISTERS AND REGISTER DEFINITIONS THAT ARE NOT CORRECT - * ON THE RADEON. A FULL AUDIT OF THIS CODE IS NEEDED! */ - -#ifndef _RADEON_REG_H_ -#define _RADEON_REG_H_ - - /* Registers for 2D/Video/Overlay */ -#define RADEON_ADAPTER_ID 0x0f2c /* PCI */ -#define RADEON_AGP_BASE 0x0170 -#define RADEON_AGP_CNTL 0x0174 -# define RADEON_AGP_APER_SIZE_256MB (0x00 << 0) -# define RADEON_AGP_APER_SIZE_128MB (0x20 << 0) -# define RADEON_AGP_APER_SIZE_64MB (0x30 << 0) -# define RADEON_AGP_APER_SIZE_32MB (0x38 << 0) -# define RADEON_AGP_APER_SIZE_16MB (0x3c << 0) -# define RADEON_AGP_APER_SIZE_8MB (0x3e << 0) -# define RADEON_AGP_APER_SIZE_4MB (0x3f << 0) -# define RADEON_AGP_APER_SIZE_MASK (0x3f << 0) -#define RADEON_AGP_COMMAND 0x0f60 /* PCI */ -#define RADEON_AGP_COMMAND_PCI_CONFIG 0x0060 /* offset in PCI config*/ -# define RADEON_AGP_ENABLE (1<<8) -#define RADEON_AGP_PLL_CNTL 0x000b /* PLL */ -#define RADEON_AGP_STATUS 0x0f5c /* PCI */ -# define RADEON_AGP_1X_MODE 0x01 -# define RADEON_AGP_2X_MODE 0x02 -# define RADEON_AGP_4X_MODE 0x04 -# define RADEON_AGP_FW_MODE 0x10 -# define RADEON_AGP_MODE_MASK 0x17 -#define RADEON_ATTRDR 0x03c1 /* VGA */ -#define RADEON_ATTRDW 0x03c0 /* VGA */ -#define RADEON_ATTRX 0x03c0 /* VGA */ -#define RADEON_AUX_SC_CNTL 0x1660 -# define RADEON_AUX1_SC_EN (1 << 0) -# define RADEON_AUX1_SC_MODE_OR (0 << 1) -# define RADEON_AUX1_SC_MODE_NAND (1 << 1) -# define RADEON_AUX2_SC_EN (1 << 2) -# define RADEON_AUX2_SC_MODE_OR (0 << 3) -# define RADEON_AUX2_SC_MODE_NAND (1 << 3) -# define RADEON_AUX3_SC_EN (1 << 4) -# define RADEON_AUX3_SC_MODE_OR (0 << 5) -# define RADEON_AUX3_SC_MODE_NAND (1 << 5) -#define RADEON_AUX1_SC_BOTTOM 0x1670 -#define RADEON_AUX1_SC_LEFT 0x1664 -#define RADEON_AUX1_SC_RIGHT 0x1668 -#define RADEON_AUX1_SC_TOP 0x166c -#define RADEON_AUX2_SC_BOTTOM 0x1680 -#define RADEON_AUX2_SC_LEFT 0x1674 -#define RADEON_AUX2_SC_RIGHT 0x1678 -#define RADEON_AUX2_SC_TOP 0x167c -#define RADEON_AUX3_SC_BOTTOM 0x1690 -#define RADEON_AUX3_SC_LEFT 0x1684 -#define RADEON_AUX3_SC_RIGHT 0x1688 -#define RADEON_AUX3_SC_TOP 0x168c -#define RADEON_AUX_WINDOW_HORZ_CNTL 0x02d8 -#define RADEON_AUX_WINDOW_VERT_CNTL 0x02dc - -#define RADEON_BASE_CODE 0x0f0b -#define RADEON_BIOS_0_SCRATCH 0x0010 -#define RADEON_BIOS_1_SCRATCH 0x0014 -#define RADEON_BIOS_2_SCRATCH 0x0018 -#define RADEON_BIOS_3_SCRATCH 0x001c -#define RADEON_BIOS_4_SCRATCH 0x0020 -#define RADEON_BIOS_5_SCRATCH 0x0024 -#define RADEON_BIOS_6_SCRATCH 0x0028 -#define RADEON_BIOS_7_SCRATCH 0x002c -#define RADEON_BIOS_ROM 0x0f30 /* PCI */ -#define RADEON_BIST 0x0f0f /* PCI */ -#define RADEON_BRUSH_DATA0 0x1480 -#define RADEON_BRUSH_DATA1 0x1484 -#define RADEON_BRUSH_DATA10 0x14a8 -#define RADEON_BRUSH_DATA11 0x14ac -#define RADEON_BRUSH_DATA12 0x14b0 -#define RADEON_BRUSH_DATA13 0x14b4 -#define RADEON_BRUSH_DATA14 0x14b8 -#define RADEON_BRUSH_DATA15 0x14bc -#define RADEON_BRUSH_DATA16 0x14c0 -#define RADEON_BRUSH_DATA17 0x14c4 -#define RADEON_BRUSH_DATA18 0x14c8 -#define RADEON_BRUSH_DATA19 0x14cc -#define RADEON_BRUSH_DATA2 0x1488 -#define RADEON_BRUSH_DATA20 0x14d0 -#define RADEON_BRUSH_DATA21 0x14d4 -#define RADEON_BRUSH_DATA22 0x14d8 -#define RADEON_BRUSH_DATA23 0x14dc -#define RADEON_BRUSH_DATA24 0x14e0 -#define RADEON_BRUSH_DATA25 0x14e4 -#define RADEON_BRUSH_DATA26 0x14e8 -#define RADEON_BRUSH_DATA27 0x14ec -#define RADEON_BRUSH_DATA28 0x14f0 -#define RADEON_BRUSH_DATA29 0x14f4 -#define RADEON_BRUSH_DATA3 0x148c -#define RADEON_BRUSH_DATA30 0x14f8 -#define RADEON_BRUSH_DATA31 0x14fc -#define RADEON_BRUSH_DATA32 0x1500 -#define RADEON_BRUSH_DATA33 0x1504 -#define RADEON_BRUSH_DATA34 0x1508 -#define RADEON_BRUSH_DATA35 0x150c -#define RADEON_BRUSH_DATA36 0x1510 -#define RADEON_BRUSH_DATA37 0x1514 -#define RADEON_BRUSH_DATA38 0x1518 -#define RADEON_BRUSH_DATA39 0x151c -#define RADEON_BRUSH_DATA4 0x1490 -#define RADEON_BRUSH_DATA40 0x1520 -#define RADEON_BRUSH_DATA41 0x1524 -#define RADEON_BRUSH_DATA42 0x1528 -#define RADEON_BRUSH_DATA43 0x152c -#define RADEON_BRUSH_DATA44 0x1530 -#define RADEON_BRUSH_DATA45 0x1534 -#define RADEON_BRUSH_DATA46 0x1538 -#define RADEON_BRUSH_DATA47 0x153c -#define RADEON_BRUSH_DATA48 0x1540 -#define RADEON_BRUSH_DATA49 0x1544 -#define RADEON_BRUSH_DATA5 0x1494 -#define RADEON_BRUSH_DATA50 0x1548 -#define RADEON_BRUSH_DATA51 0x154c -#define RADEON_BRUSH_DATA52 0x1550 -#define RADEON_BRUSH_DATA53 0x1554 -#define RADEON_BRUSH_DATA54 0x1558 -#define RADEON_BRUSH_DATA55 0x155c -#define RADEON_BRUSH_DATA56 0x1560 -#define RADEON_BRUSH_DATA57 0x1564 -#define RADEON_BRUSH_DATA58 0x1568 -#define RADEON_BRUSH_DATA59 0x156c -#define RADEON_BRUSH_DATA6 0x1498 -#define RADEON_BRUSH_DATA60 0x1570 -#define RADEON_BRUSH_DATA61 0x1574 -#define RADEON_BRUSH_DATA62 0x1578 -#define RADEON_BRUSH_DATA63 0x157c -#define RADEON_BRUSH_DATA7 0x149c -#define RADEON_BRUSH_DATA8 0x14a0 -#define RADEON_BRUSH_DATA9 0x14a4 -#define RADEON_BRUSH_SCALE 0x1470 -#define RADEON_BRUSH_Y_X 0x1474 -#define RADEON_BUS_CNTL 0x0030 -# define RADEON_BUS_MASTER_DIS (1 << 6) -# define RADEON_BUS_RD_DISCARD_EN (1 << 24) -# define RADEON_BUS_RD_ABORT_EN (1 << 25) -# define RADEON_BUS_MSTR_DISCONNECT_EN (1 << 28) -# define RADEON_BUS_WRT_BURST (1 << 29) -# define RADEON_BUS_READ_BURST (1 << 30) -#define RADEON_BUS_CNTL1 0x0034 -# define RADEON_BUS_WAIT_ON_LOCK_EN (1 << 4) - -#define RADEON_CACHE_CNTL 0x1724 -#define RADEON_CACHE_LINE 0x0f0c /* PCI */ -#define RADEON_CAP0_TRIG_CNTL 0x0950 /* ? */ -#define RADEON_CAP1_TRIG_CNTL 0x09c0 /* ? */ -#define RADEON_CAPABILITIES_ID 0x0f50 /* PCI */ -#define RADEON_CAPABILITIES_PTR 0x0f34 /* PCI */ -#define RADEON_CLK_PIN_CNTL 0x0001 /* PLL */ -#define RADEON_CLOCK_CNTL_DATA 0x000c -#define RADEON_CLOCK_CNTL_INDEX 0x0008 -# define RADEON_PLL_WR_EN (1 << 7) -# define RADEON_PLL_DIV_SEL (3 << 8) -# define RADEON_PLL2_DIV_SEL_MASK ~(3 << 8) -#define RADEON_CLR_CMP_CLR_3D 0x1a24 -#define RADEON_CLR_CMP_CLR_DST 0x15c8 -#define RADEON_CLR_CMP_CLR_SRC 0x15c4 -#define RADEON_CLR_CMP_CNTL 0x15c0 -# define RADEON_SRC_CMP_EQ_COLOR (4 << 0) -# define RADEON_SRC_CMP_NEQ_COLOR (5 << 0) -# define RADEON_CLR_CMP_SRC_SOURCE (1 << 24) -#define RADEON_CLR_CMP_MASK 0x15cc -# define RADEON_CLR_CMP_MSK 0xffffffff -#define RADEON_CLR_CMP_MASK_3D 0x1A28 -#define RADEON_COMMAND 0x0f04 /* PCI */ -#define RADEON_COMPOSITE_SHADOW_ID 0x1a0c -#define RADEON_CONFIG_APER_0_BASE 0x0100 -#define RADEON_CONFIG_APER_1_BASE 0x0104 -#define RADEON_CONFIG_APER_SIZE 0x0108 -#define RADEON_CONFIG_BONDS 0x00e8 -#define RADEON_CONFIG_CNTL 0x00e0 -# define RADEON_CFG_ATI_REV_A11 (0 << 16) -# define RADEON_CFG_ATI_REV_A12 (1 << 16) -# define RADEON_CFG_ATI_REV_A13 (2 << 16) -# define RADEON_CFG_ATI_REV_ID_MASK (0xf << 16) -#define RADEON_CONFIG_MEMSIZE 0x00f8 -#define RADEON_CONFIG_MEMSIZE_EMBEDDED 0x0114 -#define RADEON_CONFIG_REG_1_BASE 0x010c -#define RADEON_CONFIG_REG_APER_SIZE 0x0110 -#define RADEON_CONFIG_XSTRAP 0x00e4 -#define RADEON_CONSTANT_COLOR_C 0x1d34 -# define RADEON_CONSTANT_COLOR_MASK 0x00ffffff -# define RADEON_CONSTANT_COLOR_ONE 0x00ffffff -# define RADEON_CONSTANT_COLOR_ZERO 0x00000000 -#define RADEON_CRC_CMDFIFO_ADDR 0x0740 -#define RADEON_CRC_CMDFIFO_DOUT 0x0744 -#define RADEON_GRPH_BUFFER_CNTL 0x02f0 -# define RADEON_GRPH_START_REQ_MASK (0x7f) -# define RADEON_GRPH_START_REQ_SHIFT 0 -# define RADEON_GRPH_STOP_REQ_MASK (0x7f<<8) -# define RADEON_GRPH_STOP_REQ_SHIFT 8 -# define RADEON_GRPH_CRITICAL_POINT_MASK (0x7f<<16) -# define RADEON_GRPH_CRITICAL_POINT_SHIFT 16 -# define RADEON_GRPH_CRITICAL_CNTL (1<<28) -# define RADEON_GRPH_BUFFER_SIZE (1<<29) -# define RADEON_GRPH_CRITICAL_AT_SOF (1<<30) -# define RADEON_GRPH_STOP_CNTL (1<<31) -#define RADEON_GRPH2_BUFFER_CNTL 0x03f0 -# define RADEON_GRPH2_START_REQ_MASK (0x7f) -# define RADEON_GRPH2_START_REQ_SHIFT 0 -# define RADEON_GRPH2_STOP_REQ_MASK (0x7f<<8) -# define RADEON_GRPH2_STOP_REQ_SHIFT 8 -# define RADEON_GRPH2_CRITICAL_POINT_MASK (0x7f<<16) -# define RADEON_GRPH2_CRITICAL_POINT_SHIFT 16 -# define RADEON_GRPH2_CRITICAL_CNTL (1<<28) -# define RADEON_GRPH2_BUFFER_SIZE (1<<29) -# define RADEON_GRPH2_CRITICAL_AT_SOF (1<<30) -# define RADEON_GRPH2_STOP_CNTL (1<<31) -#define RADEON_CRTC_CRNT_FRAME 0x0214 -#define RADEON_CRTC_EXT_CNTL 0x0054 -# define RADEON_CRTC_VGA_XOVERSCAN (1 << 0) -# define RADEON_VGA_ATI_LINEAR (1 << 3) -# define RADEON_XCRT_CNT_EN (1 << 6) -# define RADEON_CRTC_HSYNC_DIS (1 << 8) -# define RADEON_CRTC_VSYNC_DIS (1 << 9) -# define RADEON_CRTC_DISPLAY_DIS (1 << 10) -# define RADEON_CRTC_SYNC_TRISTAT (1 << 11) -# define RADEON_CRTC_CRT_ON (1 << 15) -#define RADEON_CRTC_EXT_CNTL_DPMS_BYTE 0x0055 -# define RADEON_CRTC_HSYNC_DIS_BYTE (1 << 0) -# define RADEON_CRTC_VSYNC_DIS_BYTE (1 << 1) -# define RADEON_CRTC_DISPLAY_DIS_BYTE (1 << 2) -#define RADEON_CRTC_GEN_CNTL 0x0050 -# define RADEON_CRTC_DBL_SCAN_EN (1 << 0) -# define RADEON_CRTC_INTERLACE_EN (1 << 1) -# define RADEON_CRTC_CSYNC_EN (1 << 4) -# define RADEON_CRTC_CUR_EN (1 << 16) -# define RADEON_CRTC_CUR_MODE_MASK (7 << 17) -# define RADEON_CRTC_ICON_EN (1 << 20) -# define RADEON_CRTC_EXT_DISP_EN (1 << 24) -# define RADEON_CRTC_EN (1 << 25) -# define RADEON_CRTC_DISP_REQ_EN_B (1 << 26) -#define RADEON_CRTC2_GEN_CNTL 0x03f8 -# define RADEON_CRTC2_DBL_SCAN_EN (1 << 0) -# define RADEON_CRTC2_INTERLACE_EN (1 << 1) -# define RADEON_CRTC2_SYNC_TRISTAT (1 << 4) -# define RADEON_CRTC2_HSYNC_TRISTAT (1 << 5) -# define RADEON_CRTC2_VSYNC_TRISTAT (1 << 6) -# define RADEON_CRTC2_CRT2_ON (1 << 7) -# define RADEON_CRTC2_ICON_EN (1 << 15) -# define RADEON_CRTC2_CUR_EN (1 << 16) -# define RADEON_CRTC2_CUR_MODE_MASK (7 << 20) -# define RADEON_CRTC2_DISP_DIS (1 << 23) -# define RADEON_CRTC2_EN (1 << 25) -# define RADEON_CRTC2_DISP_REQ_EN_B (1 << 26) -# define RADEON_CRTC2_CSYNC_EN (1 << 27) -# define RADEON_CRTC2_HSYNC_DIS (1 << 28) -# define RADEON_CRTC2_VSYNC_DIS (1 << 29) -#define RADEON_CRTC_MORE_CNTL 0x27c -# define RADEON_CRTC_H_CUTOFF_ACTIVE_EN (1<<4) -# define RADEON_CRTC_V_CUTOFF_ACTIVE_EN (1<<5) -#define RADEON_CRTC_GUI_TRIG_VLINE 0x0218 -#define RADEON_CRTC_H_SYNC_STRT_WID 0x0204 -# define RADEON_CRTC_H_SYNC_STRT_PIX (0x07 << 0) -# define RADEON_CRTC_H_SYNC_STRT_CHAR (0x3ff << 3) -# define RADEON_CRTC_H_SYNC_STRT_CHAR_SHIFT 3 -# define RADEON_CRTC_H_SYNC_WID (0x3f << 16) -# define RADEON_CRTC_H_SYNC_WID_SHIFT 16 -# define RADEON_CRTC_H_SYNC_POL (1 << 23) -#define RADEON_CRTC2_H_SYNC_STRT_WID 0x0304 -# define RADEON_CRTC2_H_SYNC_STRT_PIX (0x07 << 0) -# define RADEON_CRTC2_H_SYNC_STRT_CHAR (0x3ff << 3) -# define RADEON_CRTC2_H_SYNC_STRT_CHAR_SHIFT 3 -# define RADEON_CRTC2_H_SYNC_WID (0x3f << 16) -# define RADEON_CRTC2_H_SYNC_WID_SHIFT 16 -# define RADEON_CRTC2_H_SYNC_POL (1 << 23) -#define RADEON_CRTC_H_TOTAL_DISP 0x0200 -# define RADEON_CRTC_H_TOTAL (0x03ff << 0) -# define RADEON_CRTC_H_TOTAL_SHIFT 0 -# define RADEON_CRTC_H_DISP (0x01ff << 16) -# define RADEON_CRTC_H_DISP_SHIFT 16 -#define RADEON_CRTC2_H_TOTAL_DISP 0x0300 -# define RADEON_CRTC2_H_TOTAL (0x03ff << 0) -# define RADEON_CRTC2_H_TOTAL_SHIFT 0 -# define RADEON_CRTC2_H_DISP (0x01ff << 16) -# define RADEON_CRTC2_H_DISP_SHIFT 16 -#define RADEON_CRTC_OFFSET 0x0224 -#define RADEON_CRTC2_OFFSET 0x0324 -#define RADEON_CRTC_OFFSET_CNTL 0x0228 -# define RADEON_CRTC_TILE_EN (1 << 15) -#define RADEON_CRTC2_OFFSET_CNTL 0x0328 -# define RADEON_CRTC2_TILE_EN (1 << 15) -#define RADEON_CRTC_PITCH 0x022c -#define RADEON_CRTC2_PITCH 0x032c -#define RADEON_CRTC_STATUS 0x005c -# define RADEON_CRTC_VBLANK_SAVE (1 << 1) -# define RADEON_CRTC_VBLANK_SAVE_CLEAR (1 << 1) -#define RADEON_CRTC2_STATUS 0x03fc -# define RADEON_CRTC2_VBLANK_SAVE (1 << 1) -# define RADEON_CRTC2_VBLANK_SAVE_CLEAR (1 << 1) -#define RADEON_CRTC_V_SYNC_STRT_WID 0x020c -# define RADEON_CRTC_V_SYNC_STRT (0x7ff << 0) -# define RADEON_CRTC_V_SYNC_STRT_SHIFT 0 -# define RADEON_CRTC_V_SYNC_WID (0x1f << 16) -# define RADEON_CRTC_V_SYNC_WID_SHIFT 16 -# define RADEON_CRTC_V_SYNC_POL (1 << 23) -#define RADEON_CRTC2_V_SYNC_STRT_WID 0x030c -# define RADEON_CRTC2_V_SYNC_STRT (0x7ff << 0) -# define RADEON_CRTC2_V_SYNC_STRT_SHIFT 0 -# define RADEON_CRTC2_V_SYNC_WID (0x1f << 16) -# define RADEON_CRTC2_V_SYNC_WID_SHIFT 16 -# define RADEON_CRTC2_V_SYNC_POL (1 << 23) -#define RADEON_CRTC_V_TOTAL_DISP 0x0208 -# define RADEON_CRTC_V_TOTAL (0x07ff << 0) -# define RADEON_CRTC_V_TOTAL_SHIFT 0 -# define RADEON_CRTC_V_DISP (0x07ff << 16) -# define RADEON_CRTC_V_DISP_SHIFT 16 -#define RADEON_CRTC2_V_TOTAL_DISP 0x0308 -# define RADEON_CRTC2_V_TOTAL (0x07ff << 0) -# define RADEON_CRTC2_V_TOTAL_SHIFT 0 -# define RADEON_CRTC2_V_DISP (0x07ff << 16) -# define RADEON_CRTC2_V_DISP_SHIFT 16 -#define RADEON_CRTC_VLINE_CRNT_VLINE 0x0210 -# define RADEON_CRTC_CRNT_VLINE_MASK (0x7ff << 16) -#define RADEON_CRTC2_CRNT_FRAME 0x0314 -#define RADEON_CRTC2_GUI_TRIG_VLINE 0x0318 -#define RADEON_CRTC2_STATUS 0x03fc -#define RADEON_CRTC2_VLINE_CRNT_VLINE 0x0310 -#define RADEON_CRTC8_DATA 0x03d5 /* VGA, 0x3b5 */ -#define RADEON_CRTC8_IDX 0x03d4 /* VGA, 0x3b4 */ -#define RADEON_CUR_CLR0 0x026c -#define RADEON_CUR_CLR1 0x0270 -#define RADEON_CUR_HORZ_VERT_OFF 0x0268 -#define RADEON_CUR_HORZ_VERT_POSN 0x0264 -#define RADEON_CUR_OFFSET 0x0260 -# define RADEON_CUR_LOCK (1 << 31) -#define RADEON_CUR2_CLR0 0x036c -#define RADEON_CUR2_CLR1 0x0370 -#define RADEON_CUR2_HORZ_VERT_OFF 0x0368 -#define RADEON_CUR2_HORZ_VERT_POSN 0x0364 -#define RADEON_CUR2_OFFSET 0x0360 -# define RADEON_CUR2_LOCK (1 << 31) - -#define RADEON_DAC_CNTL 0x0058 -# define RADEON_DAC_RANGE_CNTL (3 << 0) -# define RADEON_DAC_RANGE_CNTL_MASK 0x03 -# define RADEON_DAC_BLANKING (1 << 2) -# define RADEON_DAC_CMP_EN (1 << 3) -# define RADEON_DAC_CMP_OUTPUT (1 << 7) -# define RADEON_DAC_8BIT_EN (1 << 8) -# define RADEON_DAC_VGA_ADR_EN (1 << 13) -# define RADEON_DAC_PDWN (1 << 15) -# define RADEON_DAC_MASK_ALL (0xff << 24) -#define RADEON_DAC_CNTL2 0x007c -# define RADEON_DAC2_DAC_CLK_SEL (1 << 0) -# define RADEON_DAC2_DAC2_CLK_SEL (1 << 1) -# define RADEON_DAC2_PALETTE_ACC_CTL (1 << 5) -#define RADEON_DAC_EXT_CNTL 0x0280 -# define RADEON_DAC_FORCE_BLANK_OFF_EN (1 << 4) -# define RADEON_DAC_FORCE_DATA_EN (1 << 5) -# define RADEON_DAC_FORCE_DATA_SEL_MASK (3 << 6) -# define RADEON_DAC_FORCE_DATA_MASK 0x0003ff00 -# define RADEON_DAC_FORCE_DATA_SHIFT 8 -#define RADEON_TV_DAC_CNTL 0x088c -# define RADEON_TV_DAC_STD_MASK 0x0300 -# define RADEON_TV_DAC_RDACPD (1 << 24) -# define RADEON_TV_DAC_GDACPD (1 << 25) -# define RADEON_TV_DAC_BDACPD (1 << 26) -#define RADEON_DISP_HW_DEBUG 0x0d14 -# define RADEON_CRT2_DISP1_SEL (1 << 5) -#define RADEON_DISP_OUTPUT_CNTL 0x0d64 -# define RADEON_DISP_DAC_SOURCE_MASK 0x03 -# define RADEON_DISP_DAC2_SOURCE_MASK 0x0c -# define RADEON_DISP_DAC_SOURCE_CRTC2 0x01 -# define RADEON_DISP_DAC2_SOURCE_CRTC2 0x04 -#define RADEON_DAC_CRC_SIG 0x02cc -#define RADEON_DAC_DATA 0x03c9 /* VGA */ -#define RADEON_DAC_MASK 0x03c6 /* VGA */ -#define RADEON_DAC_R_INDEX 0x03c7 /* VGA */ -#define RADEON_DAC_W_INDEX 0x03c8 /* VGA */ -#define RADEON_DDA_CONFIG 0x02e0 -#define RADEON_DDA_ON_OFF 0x02e4 -#define RADEON_DEFAULT_OFFSET 0x16e0 -#define RADEON_DEFAULT_PITCH 0x16e4 -#define RADEON_DEFAULT_SC_BOTTOM_RIGHT 0x16e8 -# define RADEON_DEFAULT_SC_RIGHT_MAX (0x1fff << 0) -# define RADEON_DEFAULT_SC_BOTTOM_MAX (0x1fff << 16) -#define RADEON_DESTINATION_3D_CLR_CMP_VAL 0x1820 -#define RADEON_DESTINATION_3D_CLR_CMP_MSK 0x1824 -#define RADEON_DEVICE_ID 0x0f02 /* PCI */ -#define RADEON_DISP_MISC_CNTL 0x0d00 -# define RADEON_SOFT_RESET_GRPH_PP (1 << 0) -#define RADEON_DISP_MERGE_CNTL 0x0d60 -# define RADEON_DISP_ALPHA_MODE_MASK 0x03 -# define RADEON_DISP_ALPHA_MODE_KEY 0 -# define RADEON_DISP_ALPHA_MODE_PER_PIXEL 1 -# define RADEON_DISP_ALPHA_MODE_GLOBAL 2 -# define RADEON_DISP_RGB_OFFSET_EN (1<<8) -# define RADEON_DISP_GRPH_ALPHA_MASK (0xff << 16) -# define RADEON_DISP_OV0_ALPHA_MASK (0xff << 24) -# define RADEON_DISP_LIN_TRANS_BYPASS (0x01 << 9) -#define RADEON_DISP2_MERGE_CNTL 0x0d68 -# define RADEON_DISP2_RGB_OFFSET_EN (1<<8) -#define RADEON_DISP_LIN_TRANS_GRPH_A 0x0d80 -#define RADEON_DISP_LIN_TRANS_GRPH_B 0x0d84 -#define RADEON_DISP_LIN_TRANS_GRPH_C 0x0d88 -#define RADEON_DISP_LIN_TRANS_GRPH_D 0x0d8c -#define RADEON_DISP_LIN_TRANS_GRPH_E 0x0d90 -#define RADEON_DISP_LIN_TRANS_GRPH_F 0x0d98 -#define RADEON_DP_BRUSH_BKGD_CLR 0x1478 -#define RADEON_DP_BRUSH_FRGD_CLR 0x147c -#define RADEON_DP_CNTL 0x16c0 -# define RADEON_DST_X_LEFT_TO_RIGHT (1 << 0) -# define RADEON_DST_Y_TOP_TO_BOTTOM (1 << 1) -#define RADEON_DP_CNTL_XDIR_YDIR_YMAJOR 0x16d0 -# define RADEON_DST_Y_MAJOR (1 << 2) -# define RADEON_DST_Y_DIR_TOP_TO_BOTTOM (1 << 15) -# define RADEON_DST_X_DIR_LEFT_TO_RIGHT (1 << 31) -#define RADEON_DP_DATATYPE 0x16c4 -# define RADEON_HOST_BIG_ENDIAN_EN (1 << 29) -#define RADEON_DP_GUI_MASTER_CNTL 0x146c -# define RADEON_GMC_SRC_PITCH_OFFSET_CNTL (1 << 0) -# define RADEON_GMC_DST_PITCH_OFFSET_CNTL (1 << 1) -# define RADEON_GMC_SRC_CLIPPING (1 << 2) -# define RADEON_GMC_DST_CLIPPING (1 << 3) -# define RADEON_GMC_BRUSH_DATATYPE_MASK (0x0f << 4) -# define RADEON_GMC_BRUSH_8X8_MONO_FG_BG (0 << 4) -# define RADEON_GMC_BRUSH_8X8_MONO_FG_LA (1 << 4) -# define RADEON_GMC_BRUSH_1X8_MONO_FG_BG (4 << 4) -# define RADEON_GMC_BRUSH_1X8_MONO_FG_LA (5 << 4) -# define RADEON_GMC_BRUSH_32x1_MONO_FG_BG (6 << 4) -# define RADEON_GMC_BRUSH_32x1_MONO_FG_LA (7 << 4) -# define RADEON_GMC_BRUSH_32x32_MONO_FG_BG (8 << 4) -# define RADEON_GMC_BRUSH_32x32_MONO_FG_LA (9 << 4) -# define RADEON_GMC_BRUSH_8x8_COLOR (10 << 4) -# define RADEON_GMC_BRUSH_1X8_COLOR (12 << 4) -# define RADEON_GMC_BRUSH_SOLID_COLOR (13 << 4) -# define RADEON_GMC_BRUSH_NONE (15 << 4) -# define RADEON_GMC_DST_8BPP_CI (2 << 8) -# define RADEON_GMC_DST_15BPP (3 << 8) -# define RADEON_GMC_DST_16BPP (4 << 8) -# define RADEON_GMC_DST_24BPP (5 << 8) -# define RADEON_GMC_DST_32BPP (6 << 8) -# define RADEON_GMC_DST_8BPP_RGB (7 << 8) -# define RADEON_GMC_DST_Y8 (8 << 8) -# define RADEON_GMC_DST_RGB8 (9 << 8) -# define RADEON_GMC_DST_VYUY (11 << 8) -# define RADEON_GMC_DST_YVYU (12 << 8) -# define RADEON_GMC_DST_AYUV444 (14 << 8) -# define RADEON_GMC_DST_ARGB4444 (15 << 8) -# define RADEON_GMC_DST_DATATYPE_MASK (0x0f << 8) -# define RADEON_GMC_DST_DATATYPE_SHIFT 8 -# define RADEON_GMC_SRC_DATATYPE_MASK (3 << 12) -# define RADEON_GMC_SRC_DATATYPE_MONO_FG_BG (0 << 12) -# define RADEON_GMC_SRC_DATATYPE_MONO_FG_LA (1 << 12) -# define RADEON_GMC_SRC_DATATYPE_COLOR (3 << 12) -# define RADEON_GMC_BYTE_PIX_ORDER (1 << 14) -# define RADEON_GMC_BYTE_MSB_TO_LSB (0 << 14) -# define RADEON_GMC_BYTE_LSB_TO_MSB (1 << 14) -# define RADEON_GMC_CONVERSION_TEMP (1 << 15) -# define RADEON_GMC_CONVERSION_TEMP_6500 (0 << 15) -# define RADEON_GMC_CONVERSION_TEMP_9300 (1 << 15) -# define RADEON_GMC_ROP3_MASK (0xff << 16) -# define RADEON_DP_SRC_SOURCE_MASK (7 << 24) -# define RADEON_DP_SRC_SOURCE_MEMORY (2 << 24) -# define RADEON_DP_SRC_SOURCE_HOST_DATA (3 << 24) -# define RADEON_GMC_3D_FCN_EN (1 << 27) -# define RADEON_GMC_CLR_CMP_CNTL_DIS (1 << 28) -# define RADEON_GMC_AUX_CLIP_DIS (1 << 29) -# define RADEON_GMC_WR_MSK_DIS (1 << 30) -# define RADEON_GMC_LD_BRUSH_Y_X (1 << 31) -# define RADEON_ROP3_ZERO 0x00000000 -# define RADEON_ROP3_DSa 0x00880000 -# define RADEON_ROP3_SDna 0x00440000 -# define RADEON_ROP3_S 0x00cc0000 -# define RADEON_ROP3_DSna 0x00220000 -# define RADEON_ROP3_D 0x00aa0000 -# define RADEON_ROP3_DSx 0x00660000 -# define RADEON_ROP3_DSo 0x00ee0000 -# define RADEON_ROP3_DSon 0x00110000 -# define RADEON_ROP3_DSxn 0x00990000 -# define RADEON_ROP3_Dn 0x00550000 -# define RADEON_ROP3_SDno 0x00dd0000 -# define RADEON_ROP3_Sn 0x00330000 -# define RADEON_ROP3_DSno 0x00bb0000 -# define RADEON_ROP3_DSan 0x00770000 -# define RADEON_ROP3_ONE 0x00ff0000 -# define RADEON_ROP3_DPa 0x00a00000 -# define RADEON_ROP3_PDna 0x00500000 -# define RADEON_ROP3_P 0x00f00000 -# define RADEON_ROP3_DPna 0x000a0000 -# define RADEON_ROP3_D 0x00aa0000 -# define RADEON_ROP3_DPx 0x005a0000 -# define RADEON_ROP3_DPo 0x00fa0000 -# define RADEON_ROP3_DPon 0x00050000 -# define RADEON_ROP3_PDxn 0x00a50000 -# define RADEON_ROP3_PDno 0x00f50000 -# define RADEON_ROP3_Pn 0x000f0000 -# define RADEON_ROP3_DPno 0x00af0000 -# define RADEON_ROP3_DPan 0x005f0000 -#define RADEON_DP_GUI_MASTER_CNTL_C 0x1c84 -#define RADEON_DP_MIX 0x16c8 -#define RADEON_DP_SRC_BKGD_CLR 0x15dc -#define RADEON_DP_SRC_FRGD_CLR 0x15d8 -#define RADEON_DP_WRITE_MASK 0x16cc -#define RADEON_DST_BRES_DEC 0x1630 -#define RADEON_DST_BRES_ERR 0x1628 -#define RADEON_DST_BRES_INC 0x162c -#define RADEON_DST_BRES_LNTH 0x1634 -#define RADEON_DST_BRES_LNTH_SUB 0x1638 -#define RADEON_DST_HEIGHT 0x1410 -#define RADEON_DST_HEIGHT_WIDTH 0x143c -#define RADEON_DST_HEIGHT_WIDTH_8 0x158c -#define RADEON_DST_HEIGHT_WIDTH_BW 0x15b4 -#define RADEON_DST_HEIGHT_Y 0x15a0 -#define RADEON_DST_LINE_START 0x1600 -#define RADEON_DST_LINE_END 0x1604 -#define RADEON_DST_LINE_PATCOUNT 0x1608 -# define RADEON_BRES_CNTL_SHIFT 8 -#define RADEON_DST_OFFSET 0x1404 -#define RADEON_DST_PITCH 0x1408 -#define RADEON_DST_PITCH_OFFSET 0x142c -#define RADEON_DST_PITCH_OFFSET_C 0x1c80 -# define RADEON_PITCH_SHIFT 21 -# define RADEON_DST_TILE_LINEAR (0 << 30) -# define RADEON_DST_TILE_MACRO (1 << 30) -# define RADEON_DST_TILE_MICRO (2 << 30) -# define RADEON_DST_TILE_BOTH (3 << 30) -#define RADEON_DST_WIDTH 0x140c -#define RADEON_DST_WIDTH_HEIGHT 0x1598 -#define RADEON_DST_WIDTH_X 0x1588 -#define RADEON_DST_WIDTH_X_INCY 0x159c -#define RADEON_DST_X 0x141c -#define RADEON_DST_X_SUB 0x15a4 -#define RADEON_DST_X_Y 0x1594 -#define RADEON_DST_Y 0x1420 -#define RADEON_DST_Y_SUB 0x15a8 -#define RADEON_DST_Y_X 0x1438 - -#define RADEON_FCP_CNTL 0x0910 -# define RADEON_FCP0_SRC_PCICLK 0 -# define RADEON_FCP0_SRC_PCLK 1 -# define RADEON_FCP0_SRC_PCLKb 2 -# define RADEON_FCP0_SRC_HREF 3 -# define RADEON_FCP0_SRC_GND 4 -# define RADEON_FCP0_SRC_HREFb 5 -#define RADEON_FLUSH_1 0x1704 -#define RADEON_FLUSH_2 0x1708 -#define RADEON_FLUSH_3 0x170c -#define RADEON_FLUSH_4 0x1710 -#define RADEON_FLUSH_5 0x1714 -#define RADEON_FLUSH_6 0x1718 -#define RADEON_FLUSH_7 0x171c -#define RADEON_FOG_3D_TABLE_START 0x1810 -#define RADEON_FOG_3D_TABLE_END 0x1814 -#define RADEON_FOG_3D_TABLE_DENSITY 0x181c -#define RADEON_FOG_TABLE_INDEX 0x1a14 -#define RADEON_FOG_TABLE_DATA 0x1a18 -#define RADEON_FP_CRTC_H_TOTAL_DISP 0x0250 -#define RADEON_FP_CRTC_V_TOTAL_DISP 0x0254 -#define RADEON_FP_CRTC2_H_TOTAL_DISP 0x0350 -#define RADEON_FP_CRTC2_V_TOTAL_DISP 0x0354 -# define RADEON_FP_CRTC_H_TOTAL_MASK 0x000003ff -# define RADEON_FP_CRTC_H_DISP_MASK 0x01ff0000 -# define RADEON_FP_CRTC_V_TOTAL_MASK 0x00000fff -# define RADEON_FP_CRTC_V_DISP_MASK 0x0fff0000 -# define RADEON_FP_H_SYNC_STRT_CHAR_MASK 0x00001ff8 -# define RADEON_FP_H_SYNC_WID_MASK 0x003f0000 -# define RADEON_FP_V_SYNC_STRT_MASK 0x00000fff -# define RADEON_FP_V_SYNC_WID_MASK 0x001f0000 -# define RADEON_FP_CRTC_H_TOTAL_SHIFT 0x00000000 -# define RADEON_FP_CRTC_H_DISP_SHIFT 0x00000010 -# define RADEON_FP_CRTC_V_TOTAL_SHIFT 0x00000000 -# define RADEON_FP_CRTC_V_DISP_SHIFT 0x00000010 -# define RADEON_FP_H_SYNC_STRT_CHAR_SHIFT 0x00000003 -# define RADEON_FP_H_SYNC_WID_SHIFT 0x00000010 -# define RADEON_FP_V_SYNC_STRT_SHIFT 0x00000000 -# define RADEON_FP_V_SYNC_WID_SHIFT 0x00000010 -#define RADEON_FP_GEN_CNTL 0x0284 -# define RADEON_FP_FPON (1 << 0) -# define RADEON_FP_TMDS_EN (1 << 2) -# define RADEON_FP_PANEL_FORMAT (1 << 3) -# define RADEON_FP_EN_TMDS (1 << 7) -# define RADEON_FP_DETECT_SENSE (1 << 8) -# define RADEON_FP_SEL_CRTC2 (1 << 13) -# define RADEON_FP_CRTC_DONT_SHADOW_HPAR (1 << 15) -# define RADEON_FP_CRTC_DONT_SHADOW_VPAR (1 << 16) -# define RADEON_FP_CRTC_DONT_SHADOW_HEND (1 << 17) -# define RADEON_FP_CRTC_USE_SHADOW_VEND (1 << 18) -# define RADEON_FP_RMX_HVSYNC_CONTROL_EN (1 << 20) -# define RADEON_FP_DFP_SYNC_SEL (1 << 21) -# define RADEON_FP_CRTC_LOCK_8DOT (1 << 22) -# define RADEON_FP_CRT_SYNC_SEL (1 << 23) -# define RADEON_FP_USE_SHADOW_EN (1 << 24) -# define RADEON_FP_CRT_SYNC_ALT (1 << 26) -#define RADEON_FP2_GEN_CNTL 0x0288 -# define RADEON_FP2_BLANK_EN (1 << 1) -# define RADEON_FP2_ON (1 << 2) -# define RADEON_FP2_PANEL_FORMAT (1 << 3) -# define RADEON_FP2_SOURCE_SEL_MASK (3 << 10) -# define RADEON_FP2_SOURCE_SEL_CRTC2 (1 << 10) -# define RADEON_FP2_SRC_SEL_MASK (3 << 13) -# define RADEON_FP2_SRC_SEL_CRTC2 (1 << 13) -# define RADEON_FP2_FP_POL (1 << 16) -# define RADEON_FP2_LP_POL (1 << 17) -# define RADEON_FP2_SCK_POL (1 << 18) -# define RADEON_FP2_LCD_CNTL_MASK (7 << 19) -# define RADEON_FP2_PAD_FLOP_EN (1 << 22) -# define RADEON_FP2_CRC_EN (1 << 23) -# define RADEON_FP2_CRC_READ_EN (1 << 24) -# define RADEON_FP2_DV0_EN (1 << 25) -# define RADEON_FP2_DV0_RATE_SEL_SDR (1 << 26) -#define RADEON_FP_H_SYNC_STRT_WID 0x02c4 -#define RADEON_FP_H2_SYNC_STRT_WID 0x03c4 -#define RADEON_FP_HORZ_STRETCH 0x028c -#define RADEON_FP_HORZ2_STRETCH 0x038c -# define RADEON_HORZ_STRETCH_RATIO_MASK 0xffff -# define RADEON_HORZ_STRETCH_RATIO_MAX 4096 -# define RADEON_HORZ_PANEL_SIZE (0x1ff << 16) -# define RADEON_HORZ_PANEL_SHIFT 16 -# define RADEON_HORZ_STRETCH_PIXREP (0 << 25) -# define RADEON_HORZ_STRETCH_BLEND (1 << 26) -# define RADEON_HORZ_STRETCH_ENABLE (1 << 25) -# define RADEON_HORZ_AUTO_RATIO (1 << 27) -# define RADEON_HORZ_FP_LOOP_STRETCH (0x7 << 28) -# define RADEON_HORZ_AUTO_RATIO_INC (1 << 31) -#define RADEON_FP_V_SYNC_STRT_WID 0x02c8 -#define RADEON_FP_VERT_STRETCH 0x0290 -#define RADEON_FP_V2_SYNC_STRT_WID 0x03c8 -#define RADEON_FP_VERT2_STRETCH 0x0390 -# define RADEON_VERT_PANEL_SIZE (0xfff << 12) -# define RADEON_VERT_PANEL_SHIFT 12 -# define RADEON_VERT_STRETCH_RATIO_MASK 0xfff -# define RADEON_VERT_STRETCH_RATIO_SHIFT 0 -# define RADEON_VERT_STRETCH_RATIO_MAX 4096 -# define RADEON_VERT_STRETCH_ENABLE (1 << 25) -# define RADEON_VERT_STRETCH_LINEREP (0 << 26) -# define RADEON_VERT_STRETCH_BLEND (1 << 26) -# define RADEON_VERT_AUTO_RATIO_EN (1 << 27) -# define RADEON_VERT_STRETCH_RESERVED 0xf1000000 - -#define RADEON_GEN_INT_CNTL 0x0040 -#define RADEON_GEN_INT_STATUS 0x0044 -# define RADEON_VSYNC_INT_AK (1 << 2) -# define RADEON_VSYNC_INT (1 << 2) -# define RADEON_VSYNC2_INT_AK (1 << 6) -# define RADEON_VSYNC2_INT (1 << 6) -#define RADEON_GENENB 0x03c3 /* VGA */ -#define RADEON_GENFC_RD 0x03ca /* VGA */ -#define RADEON_GENFC_WT 0x03da /* VGA, 0x03ba */ -#define RADEON_GENMO_RD 0x03cc /* VGA */ -#define RADEON_GENMO_WT 0x03c2 /* VGA */ -#define RADEON_GENS0 0x03c2 /* VGA */ -#define RADEON_GENS1 0x03da /* VGA, 0x03ba */ -#define RADEON_GPIO_MONID 0x0068 /* DDC interface via I2C */ -#define RADEON_GPIO_MONIDB 0x006c -#define RADEON_GPIO_CRT2_DDC 0x006c -#define RADEON_GPIO_DVI_DDC 0x0064 -#define RADEON_GPIO_VGA_DDC 0x0060 -# define RADEON_GPIO_A_0 (1 << 0) -# define RADEON_GPIO_A_1 (1 << 1) -# define RADEON_GPIO_Y_0 (1 << 8) -# define RADEON_GPIO_Y_1 (1 << 9) -# define RADEON_GPIO_Y_SHIFT_0 8 -# define RADEON_GPIO_Y_SHIFT_1 9 -# define RADEON_GPIO_EN_0 (1 << 16) -# define RADEON_GPIO_EN_1 (1 << 17) -# define RADEON_GPIO_MASK_0 (1 << 24) /*??*/ -# define RADEON_GPIO_MASK_1 (1 << 25) /*??*/ -#define RADEON_GRPH8_DATA 0x03cf /* VGA */ -#define RADEON_GRPH8_IDX 0x03ce /* VGA */ -#define RADEON_GUI_SCRATCH_REG0 0x15e0 -#define RADEON_GUI_SCRATCH_REG1 0x15e4 -#define RADEON_GUI_SCRATCH_REG2 0x15e8 -#define RADEON_GUI_SCRATCH_REG3 0x15ec -#define RADEON_GUI_SCRATCH_REG4 0x15f0 -#define RADEON_GUI_SCRATCH_REG5 0x15f4 - -#define RADEON_HEADER 0x0f0e /* PCI */ -#define RADEON_HOST_DATA0 0x17c0 -#define RADEON_HOST_DATA1 0x17c4 -#define RADEON_HOST_DATA2 0x17c8 -#define RADEON_HOST_DATA3 0x17cc -#define RADEON_HOST_DATA4 0x17d0 -#define RADEON_HOST_DATA5 0x17d4 -#define RADEON_HOST_DATA6 0x17d8 -#define RADEON_HOST_DATA7 0x17dc -#define RADEON_HOST_DATA_LAST 0x17e0 -#define RADEON_HOST_PATH_CNTL 0x0130 -# define RADEON_HDP_SOFT_RESET (1 << 26) -#define RADEON_HTOTAL_CNTL 0x0009 /* PLL */ -#define RADEON_HTOTAL2_CNTL 0x002e /* PLL */ - -#define RADEON_I2C_CNTL_1 0x0094 /* ? */ -#define RADEON_DVI_I2C_CNTL_1 0x02e4 /* ? */ -#define RADEON_INTERRUPT_LINE 0x0f3c /* PCI */ -#define RADEON_INTERRUPT_PIN 0x0f3d /* PCI */ -#define RADEON_IO_BASE 0x0f14 /* PCI */ - -#define RADEON_LATENCY 0x0f0d /* PCI */ -#define RADEON_LEAD_BRES_DEC 0x1608 -#define RADEON_LEAD_BRES_LNTH 0x161c -#define RADEON_LEAD_BRES_LNTH_SUB 0x1624 -#define RADEON_LVDS_GEN_CNTL 0x02d0 -# define RADEON_LVDS_ON (1 << 0) -# define RADEON_LVDS_DISPLAY_DIS (1 << 1) -# define RADEON_LVDS_PANEL_TYPE (1 << 2) -# define RADEON_LVDS_PANEL_FORMAT (1 << 3) -# define RADEON_LVDS_EN (1 << 7) -# define RADEON_LVDS_DIGON (1 << 18) -# define RADEON_LVDS_BLON (1 << 19) -# define RADEON_LVDS_SEL_CRTC2 (1 << 23) -#define RADEON_LVDS_PLL_CNTL 0x02d4 -# define RADEON_HSYNC_DELAY_SHIFT 28 -# define RADEON_HSYNC_DELAY_MASK (0xf << 28) - -#define RADEON_MAX_LATENCY 0x0f3f /* PCI */ -#define RADEON_MC_AGP_LOCATION 0x014c -#define RADEON_MC_FB_LOCATION 0x0148 -#define RADEON_DISPLAY_BASE_ADDR 0x23c -#define RADEON_DISPLAY2_BASE_ADDR 0x33c -#define RADEON_OV0_BASE_ADDR 0x43c -#define RADEON_NB_TOM 0x15c -#define RADEON_MCLK_CNTL 0x0012 /* PLL */ -# define RADEON_FORCEON_MCLKA (1 << 16) -# define RADEON_FORCEON_MCLKB (1 << 17) -# define RADEON_FORCEON_YCLKA (1 << 18) -# define RADEON_FORCEON_YCLKB (1 << 19) -# define RADEON_FORCEON_MC (1 << 20) -# define RADEON_FORCEON_AIC (1 << 21) -#define RADEON_MDGPIO_A_REG 0x01ac -#define RADEON_MDGPIO_EN_REG 0x01b0 -#define RADEON_MDGPIO_MASK 0x0198 -#define RADEON_MDGPIO_Y_REG 0x01b4 -#define RADEON_MEM_ADDR_CONFIG 0x0148 -#define RADEON_MEM_BASE 0x0f10 /* PCI */ -#define RADEON_MEM_CNTL 0x0140 -# define RADEON_MEM_NUM_CHANNELS_MASK 0x01 -# define RADEON_MEM_USE_B_CH_ONLY (1<<1) -# define RV100_HALF_MODE (1<<3) -# define R300_MEM_NUM_CHANNELS_MASK 0x03 -# define R300_MEM_USE_CD_CH_ONLY (1<<2) -#define RADEON_MEM_TIMING_CNTL 0x0144 /* EXT_MEM_CNTL */ -#define RADEON_MEM_INIT_LAT_TIMER 0x0154 -#define RADEON_MEM_INTF_CNTL 0x014c -#define RADEON_MEM_SDRAM_MODE_REG 0x0158 -#define RADEON_MEM_STR_CNTL 0x0150 -#define RADEON_MEM_VGA_RP_SEL 0x003c -#define RADEON_MEM_VGA_WP_SEL 0x0038 -#define RADEON_MIN_GRANT 0x0f3e /* PCI */ -#define RADEON_MM_DATA 0x0004 -#define RADEON_MM_INDEX 0x0000 -#define RADEON_MPLL_CNTL 0x000e /* PLL */ -#define RADEON_MPP_TB_CONFIG 0x01c0 /* ? */ -#define RADEON_MPP_GP_CONFIG 0x01c8 /* ? */ -#define R300_MC_IND_INDEX 0x01f8 -# define R300_MC_IND_ADDR_MASK 0x3f -#define R300_MC_IND_DATA 0x01fc -#define R300_MC_READ_CNTL_AB 0x017c -# define R300_MEM_RBS_POSITION_A_MASK 0x03 -#define R300_MC_READ_CNTL_CD_mcind 0x24 -# define R300_MEM_RBS_POSITION_C_MASK 0x03 - -#define RADEON_N_VIF_COUNT 0x0248 - -#define RADEON_OV0_AUTO_FLIP_CNTL 0x0470 -#define RADEON_OV0_COLOUR_CNTL 0x04E0 -#define RADEON_OV0_DEINTERLACE_PATTERN 0x0474 -#define RADEON_OV0_EXCLUSIVE_HORZ 0x0408 -# define RADEON_EXCL_HORZ_START_MASK 0x000000ff -# define RADEON_EXCL_HORZ_END_MASK 0x0000ff00 -# define RADEON_EXCL_HORZ_BACK_PORCH_MASK 0x00ff0000 -# define RADEON_EXCL_HORZ_EXCLUSIVE_EN 0x80000000 -#define RADEON_OV0_EXCLUSIVE_VERT 0x040C -# define RADEON_EXCL_VERT_START_MASK 0x000003ff -# define RADEON_EXCL_VERT_END_MASK 0x03ff0000 -#define RADEON_OV0_FILTER_CNTL 0x04A0 -#define RADEON_OV0_FOUR_TAP_COEF_0 0x04B0 -#define RADEON_OV0_FOUR_TAP_COEF_1 0x04B4 -#define RADEON_OV0_FOUR_TAP_COEF_2 0x04B8 -#define RADEON_OV0_FOUR_TAP_COEF_3 0x04BC -#define RADEON_OV0_FOUR_TAP_COEF_4 0x04C0 -#define RADEON_OV0_GAMMA_000_00F 0x0d40 -#define RADEON_OV0_GAMMA_010_01F 0x0d44 -#define RADEON_OV0_GAMMA_020_03F 0x0d48 -#define RADEON_OV0_GAMMA_040_07F 0x0d4c -#define RADEON_OV0_GAMMA_080_0BF 0x0e00 -#define RADEON_OV0_GAMMA_0C0_0FF 0x0e04 -#define RADEON_OV0_GAMMA_100_13F 0x0e08 -#define RADEON_OV0_GAMMA_140_17F 0x0e0c -#define RADEON_OV0_GAMMA_180_1BF 0x0e10 -#define RADEON_OV0_GAMMA_1C0_1FF 0x0e14 -#define RADEON_OV0_GAMMA_200_23F 0x0e18 -#define RADEON_OV0_GAMMA_240_27F 0x0e1c -#define RADEON_OV0_GAMMA_280_2BF 0x0e20 -#define RADEON_OV0_GAMMA_2C0_2FF 0x0e24 -#define RADEON_OV0_GAMMA_300_33F 0x0e28 -#define RADEON_OV0_GAMMA_340_37F 0x0e2c -#define RADEON_OV0_GAMMA_380_3BF 0x0d50 -#define RADEON_OV0_GAMMA_3C0_3FF 0x0d54 -#define RADEON_OV0_GRAPHICS_KEY_CLR_LOW 0x04EC -#define RADEON_OV0_GRAPHICS_KEY_CLR_HIGH 0x04F0 -#define RADEON_OV0_H_INC 0x0480 -#define RADEON_OV0_KEY_CNTL 0x04F4 -# define RADEON_VIDEO_KEY_FN_MASK 0x00000003L -# define RADEON_VIDEO_KEY_FN_FALSE 0x00000000L -# define RADEON_VIDEO_KEY_FN_TRUE 0x00000001L -# define RADEON_VIDEO_KEY_FN_EQ 0x00000002L -# define RADEON_VIDEO_KEY_FN_NE 0x00000003L -# define RADEON_GRAPHIC_KEY_FN_MASK 0x00000030L -# define RADEON_GRAPHIC_KEY_FN_FALSE 0x00000000L -# define RADEON_GRAPHIC_KEY_FN_TRUE 0x00000010L -# define RADEON_GRAPHIC_KEY_FN_EQ 0x00000020L -# define RADEON_GRAPHIC_KEY_FN_NE 0x00000030L -# define RADEON_CMP_MIX_MASK 0x00000100L -# define RADEON_CMP_MIX_OR 0x00000000L -# define RADEON_CMP_MIX_AND 0x00000100L -#define RADEON_OV0_LIN_TRANS_A 0x0d20 -#define RADEON_OV0_LIN_TRANS_B 0x0d24 -#define RADEON_OV0_LIN_TRANS_C 0x0d28 -#define RADEON_OV0_LIN_TRANS_D 0x0d2c -#define RADEON_OV0_LIN_TRANS_E 0x0d30 -#define RADEON_OV0_LIN_TRANS_F 0x0d34 -#define RADEON_OV0_P1_BLANK_LINES_AT_TOP 0x0430 -# define RADEON_P1_BLNK_LN_AT_TOP_M1_MASK 0x00000fffL -# define RADEON_P1_ACTIVE_LINES_M1 0x0fff0000L -#define RADEON_OV0_P1_H_ACCUM_INIT 0x0488 -#define RADEON_OV0_P1_V_ACCUM_INIT 0x0428 -# define RADEON_OV0_P1_MAX_LN_IN_PER_LN_OUT 0x00000003L -# define RADEON_OV0_P1_V_ACCUM_INIT_MASK 0x01ff8000L -#define RADEON_OV0_P1_X_START_END 0x0494 -#define RADEON_OV0_P2_X_START_END 0x0498 -#define RADEON_OV0_P23_BLANK_LINES_AT_TOP 0x0434 -# define RADEON_P23_BLNK_LN_AT_TOP_M1_MASK 0x000007ffL -# define RADEON_P23_ACTIVE_LINES_M1 0x07ff0000L -#define RADEON_OV0_P23_H_ACCUM_INIT 0x048C -#define RADEON_OV0_P23_V_ACCUM_INIT 0x042C -#define RADEON_OV0_P3_X_START_END 0x049C -#define RADEON_OV0_REG_LOAD_CNTL 0x0410 -# define RADEON_REG_LD_CTL_LOCK 0x00000001L -# define RADEON_REG_LD_CTL_VBLANK_DURING_LOCK 0x00000002L -# define RADEON_REG_LD_CTL_STALL_GUI_UNTIL_FLIP 0x00000004L -# define RADEON_REG_LD_CTL_LOCK_READBACK 0x00000008L -#define RADEON_OV0_SCALE_CNTL 0x0420 -# define RADEON_SCALER_HORZ_PICK_NEAREST 0x00000004L -# define RADEON_SCALER_VERT_PICK_NEAREST 0x00000008L -# define RADEON_SCALER_SIGNED_UV 0x00000010L -# define RADEON_SCALER_GAMMA_SEL_MASK 0x00000060L -# define RADEON_SCALER_GAMMA_SEL_BRIGHT 0x00000000L -# define RADEON_SCALER_GAMMA_SEL_G22 0x00000020L -# define RADEON_SCALER_GAMMA_SEL_G18 0x00000040L -# define RADEON_SCALER_GAMMA_SEL_G14 0x00000060L -# define RADEON_SCALER_COMCORE_SHIFT_UP_ONE 0x00000080L -# define RADEON_SCALER_SURFAC_FORMAT 0x00000f00L -# define RADEON_SCALER_SOURCE_15BPP 0x00000300L -# define RADEON_SCALER_SOURCE_16BPP 0x00000400L -# define RADEON_SCALER_SOURCE_32BPP 0x00000600L -# define RADEON_SCALER_SOURCE_YUV9 0x00000900L -# define RADEON_SCALER_SOURCE_YUV12 0x00000A00L -# define RADEON_SCALER_SOURCE_VYUY422 0x00000B00L -# define RADEON_SCALER_SOURCE_YVYU422 0x00000C00L -# define RADEON_SCALER_ADAPTIVE_DEINT 0x00001000L -# define RADEON_SCALER_TEMPORAL_DEINT 0x00002000L -# define RADEON_SCALER_SMART_SWITCH 0x00008000L -# define RADEON_SCALER_BURST_PER_PLANE 0x007F0000L -# define RADEON_SCALER_DOUBLE_BUFFER 0x01000000L -# define RADEON_SCALER_DIS_LIMIT 0x08000000L -# define RADEON_SCALER_INT_EMU 0x20000000L -# define RADEON_SCALER_ENABLE 0x40000000L -# define RADEON_SCALER_SOFT_RESET 0x80000000L -# define RADEON_SCALER_ADAPTIVE_DEINT 0x00001000L -#define RADEON_OV0_STEP_BY 0x0484 -#define RADEON_OV0_TEST 0x04F8 -#define RADEON_OV0_V_INC 0x0424 -#define RADEON_OV0_VID_BUF_PITCH0_VALUE 0x0460 -#define RADEON_OV0_VID_BUF_PITCH1_VALUE 0x0464 -#define RADEON_OV0_VID_BUF0_BASE_ADRS 0x0440 -# define RADEON_VIF_BUF0_PITCH_SEL 0x00000001L -# define RADEON_VIF_BUF0_TILE_ADRS 0x00000002L -# define RADEON_VIF_BUF0_BASE_ADRS_MASK 0x03fffff0L -# define RADEON_VIF_BUF0_1ST_LINE_LSBS_MASK 0x48000000L -#define RADEON_OV0_VID_BUF1_BASE_ADRS 0x0444 -# define RADEON_VIF_BUF1_PITCH_SEL 0x00000001L -# define RADEON_VIF_BUF1_TILE_ADRS 0x00000002L -# define RADEON_VIF_BUF1_BASE_ADRS_MASK 0x03fffff0L -# define RADEON_VIF_BUF1_1ST_LINE_LSBS_MASK 0x48000000L -#define RADEON_OV0_VID_BUF2_BASE_ADRS 0x0448 -# define RADEON_VIF_BUF2_PITCH_SEL 0x00000001L -# define RADEON_VIF_BUF2_TILE_ADRS 0x00000002L -# define RADEON_VIF_BUF2_BASE_ADRS_MASK 0x03fffff0L -# define RADEON_VIF_BUF2_1ST_LINE_LSBS_MASK 0x48000000L -#define RADEON_OV0_VID_BUF3_BASE_ADRS 0x044C -#define RADEON_OV0_VID_BUF4_BASE_ADRS 0x0450 -#define RADEON_OV0_VID_BUF5_BASE_ADRS 0x0454 -#define RADEON_OV0_VIDEO_KEY_CLR_HIGH 0x04E8 -#define RADEON_OV0_VIDEO_KEY_CLR_LOW 0x04E4 -#define RADEON_OV0_Y_X_START 0x0400 -#define RADEON_OV0_Y_X_END 0x0404 -#define RADEON_OV1_Y_X_START 0x0600 -#define RADEON_OV1_Y_X_END 0x0604 -#define RADEON_OVR_CLR 0x0230 -#define RADEON_OVR_WID_LEFT_RIGHT 0x0234 -#define RADEON_OVR_WID_TOP_BOTTOM 0x0238 - -#define RADEON_P2PLL_CNTL 0x002a /* P2PLL */ -# define RADEON_P2PLL_RESET (1 << 0) -# define RADEON_P2PLL_SLEEP (1 << 1) -# define RADEON_P2PLL_ATOMIC_UPDATE_EN (1 << 16) -# define RADEON_P2PLL_VGA_ATOMIC_UPDATE_EN (1 << 17) -# define RADEON_P2PLL_ATOMIC_UPDATE_VSYNC (1 << 18) -#define RADEON_P2PLL_DIV_0 0x002c -# define RADEON_P2PLL_FB0_DIV_MASK 0x07ff -# define RADEON_P2PLL_POST0_DIV_MASK 0x00070000 -#define RADEON_P2PLL_REF_DIV 0x002B /* PLL */ -# define RADEON_P2PLL_REF_DIV_MASK 0x03ff -# define RADEON_P2PLL_ATOMIC_UPDATE_R (1 << 15) /* same as _W */ -# define RADEON_P2PLL_ATOMIC_UPDATE_W (1 << 15) /* same as _R */ -# define R300_PPLL_REF_DIV_ACC_MASK (0x3ff << 18) -# define R300_PPLL_REF_DIV_ACC_SHIFT 18 -#define RADEON_PALETTE_DATA 0x00b4 -#define RADEON_PALETTE_30_DATA 0x00b8 -#define RADEON_PALETTE_INDEX 0x00b0 -#define RADEON_PCI_GART_PAGE 0x017c -#define RADEON_PIXCLKS_CNTL 0x002d -# define RADEON_PIX2CLK_SRC_SEL_MASK 0x03 -# define RADEON_PIX2CLK_SRC_SEL_CPUCLK 0x00 -# define RADEON_PIX2CLK_SRC_SEL_PSCANCLK 0x01 -# define RADEON_PIX2CLK_SRC_SEL_BYTECLK 0x02 -# define RADEON_PIX2CLK_SRC_SEL_P2PLLCLK 0x03 -# define RADEON_PIX2CLK_ALWAYS_ONb (1<<6) -# define RADEON_PIX2CLK_DAC_ALWAYS_ONb (1<<7) -# define RADEON_PIXCLK_TV_SRC_SEL (1 << 8) -# define RADEON_PIXCLK_LVDS_ALWAYS_ONb (1 << 14) -# define RADEON_PIXCLK_TMDS_ALWAYS_ONb (1 << 15) -#define RADEON_PLANE_3D_MASK_C 0x1d44 -#define RADEON_PLL_TEST_CNTL 0x0013 /* PLL */ -#define RADEON_PMI_CAP_ID 0x0f5c /* PCI */ -#define RADEON_PMI_DATA 0x0f63 /* PCI */ -#define RADEON_PMI_NXT_CAP_PTR 0x0f5d /* PCI */ -#define RADEON_PMI_PMC_REG 0x0f5e /* PCI */ -#define RADEON_PMI_PMCSR_REG 0x0f60 /* PCI */ -#define RADEON_PMI_REGISTER 0x0f5c /* PCI */ -#define RADEON_PPLL_CNTL 0x0002 /* PLL */ -# define RADEON_PPLL_RESET (1 << 0) -# define RADEON_PPLL_SLEEP (1 << 1) -# define RADEON_PPLL_ATOMIC_UPDATE_EN (1 << 16) -# define RADEON_PPLL_VGA_ATOMIC_UPDATE_EN (1 << 17) -# define RADEON_PPLL_ATOMIC_UPDATE_VSYNC (1 << 18) -#define RADEON_PPLL_DIV_0 0x0004 /* PLL */ -#define RADEON_PPLL_DIV_1 0x0005 /* PLL */ -#define RADEON_PPLL_DIV_2 0x0006 /* PLL */ -#define RADEON_PPLL_DIV_3 0x0007 /* PLL */ -# define RADEON_PPLL_FB3_DIV_MASK 0x07ff -# define RADEON_PPLL_POST3_DIV_MASK 0x00070000 -#define RADEON_PPLL_REF_DIV 0x0003 /* PLL */ -# define RADEON_PPLL_REF_DIV_MASK 0x03ff -# define RADEON_PPLL_ATOMIC_UPDATE_R (1 << 15) /* same as _W */ -# define RADEON_PPLL_ATOMIC_UPDATE_W (1 << 15) /* same as _R */ -#define RADEON_PWR_MNGMT_CNTL_STATUS 0x0f60 /* PCI */ - -#define RADEON_RBBM_GUICNTL 0x172c -# define RADEON_HOST_DATA_SWAP_NONE (0 << 0) -# define RADEON_HOST_DATA_SWAP_16BIT (1 << 0) -# define RADEON_HOST_DATA_SWAP_32BIT (2 << 0) -# define RADEON_HOST_DATA_SWAP_HDW (3 << 0) -#define RADEON_RBBM_SOFT_RESET 0x00f0 -# define RADEON_SOFT_RESET_CP (1 << 0) -# define RADEON_SOFT_RESET_HI (1 << 1) -# define RADEON_SOFT_RESET_SE (1 << 2) -# define RADEON_SOFT_RESET_RE (1 << 3) -# define RADEON_SOFT_RESET_PP (1 << 4) -# define RADEON_SOFT_RESET_E2 (1 << 5) -# define RADEON_SOFT_RESET_RB (1 << 6) -# define RADEON_SOFT_RESET_HDP (1 << 7) -#define RADEON_RBBM_STATUS 0x0e40 -# define RADEON_RBBM_FIFOCNT_MASK 0x007f -# define RADEON_RBBM_ACTIVE (1 << 31) -#define RADEON_RB2D_DSTCACHE_CTLSTAT 0x342c -# define RADEON_RB2D_DC_FLUSH (3 << 0) -# define RADEON_RB2D_DC_FREE (3 << 2) -# define RADEON_RB2D_DC_FLUSH_ALL 0xf -# define RADEON_RB2D_DC_BUSY (1 << 31) -#define RADEON_RB2D_DSTCACHE_MODE 0x3428 -#define RADEON_REG_BASE 0x0f18 /* PCI */ -#define RADEON_REGPROG_INF 0x0f09 /* PCI */ -#define RADEON_REVISION_ID 0x0f08 /* PCI */ - -#define RADEON_SC_BOTTOM 0x164c -#define RADEON_SC_BOTTOM_RIGHT 0x16f0 -#define RADEON_SC_BOTTOM_RIGHT_C 0x1c8c -#define RADEON_SC_LEFT 0x1640 -#define RADEON_SC_RIGHT 0x1644 -#define RADEON_SC_TOP 0x1648 -#define RADEON_SC_TOP_LEFT 0x16ec -#define RADEON_SC_TOP_LEFT_C 0x1c88 -# define RADEON_SC_SIGN_MASK_LO 0x8000 -# define RADEON_SC_SIGN_MASK_HI 0x80000000 -#define RADEON_SCLK_CNTL 0x000d /* PLL */ -# define RADEON_DYN_STOP_LAT_MASK 0x00007ff8 -# define RADEON_CP_MAX_DYN_STOP_LAT 0x0008 -# define RADEON_SCLK_FORCEON_MASK 0xffff8000 -#define RADEON_SCLK_MORE_CNTL 0x0035 /* PLL */ -# define RADEON_SCLK_MORE_FORCEON 0x0700 -#define RADEON_SDRAM_MODE_REG 0x0158 -#define RADEON_SEQ8_DATA 0x03c5 /* VGA */ -#define RADEON_SEQ8_IDX 0x03c4 /* VGA */ -#define RADEON_SNAPSHOT_F_COUNT 0x0244 -#define RADEON_SNAPSHOT_VH_COUNTS 0x0240 -#define RADEON_SNAPSHOT_VIF_COUNT 0x024c -#define RADEON_SRC_OFFSET 0x15ac -#define RADEON_SRC_PITCH 0x15b0 -#define RADEON_SRC_PITCH_OFFSET 0x1428 -#define RADEON_SRC_SC_BOTTOM 0x165c -#define RADEON_SRC_SC_BOTTOM_RIGHT 0x16f4 -#define RADEON_SRC_SC_RIGHT 0x1654 -#define RADEON_SRC_X 0x1414 -#define RADEON_SRC_X_Y 0x1590 -#define RADEON_SRC_Y 0x1418 -#define RADEON_SRC_Y_X 0x1434 -#define RADEON_STATUS 0x0f06 /* PCI */ -#define RADEON_SUBPIC_CNTL 0x0540 /* ? */ -#define RADEON_SUB_CLASS 0x0f0a /* PCI */ -#define RADEON_SURFACE_CNTL 0x0b00 -# define RADEON_SURF_TRANSLATION_DIS (1 << 8) -# define RADEON_NONSURF_AP0_SWP_16BPP (1 << 20) -# define RADEON_NONSURF_AP0_SWP_32BPP (1 << 21) -#define RADEON_SURFACE0_INFO 0x0b0c -#define RADEON_SURFACE0_LOWER_BOUND 0x0b04 -#define RADEON_SURFACE0_UPPER_BOUND 0x0b08 -#define RADEON_SURFACE1_INFO 0x0b1c -#define RADEON_SURFACE1_LOWER_BOUND 0x0b14 -#define RADEON_SURFACE1_UPPER_BOUND 0x0b18 -#define RADEON_SURFACE2_INFO 0x0b2c -#define RADEON_SURFACE2_LOWER_BOUND 0x0b24 -#define RADEON_SURFACE2_UPPER_BOUND 0x0b28 -#define RADEON_SURFACE3_INFO 0x0b3c -#define RADEON_SURFACE3_LOWER_BOUND 0x0b34 -#define RADEON_SURFACE3_UPPER_BOUND 0x0b38 -#define RADEON_SURFACE4_INFO 0x0b4c -#define RADEON_SURFACE4_LOWER_BOUND 0x0b44 -#define RADEON_SURFACE4_UPPER_BOUND 0x0b48 -#define RADEON_SURFACE5_INFO 0x0b5c -#define RADEON_SURFACE5_LOWER_BOUND 0x0b54 -#define RADEON_SURFACE5_UPPER_BOUND 0x0b58 -#define RADEON_SURFACE6_INFO 0x0b6c -#define RADEON_SURFACE6_LOWER_BOUND 0x0b64 -#define RADEON_SURFACE6_UPPER_BOUND 0x0b68 -#define RADEON_SURFACE7_INFO 0x0b7c -#define RADEON_SURFACE7_LOWER_BOUND 0x0b74 -#define RADEON_SURFACE7_UPPER_BOUND 0x0b78 -#define RADEON_SW_SEMAPHORE 0x013c - -#define RADEON_TEST_DEBUG_CNTL 0x0120 -#define RADEON_TEST_DEBUG_MUX 0x0124 -#define RADEON_TEST_DEBUG_OUT 0x012c -#define RADEON_TMDS_PLL_CNTL 0x02a8 -#define RADEON_TMDS_TRANSMITTER_CNTL 0x02a4 -# define RADEON_TMDS_TRANSMITTER_PLLEN 1 -# define RADEON_TMDS_TRANSMITTER_PLLRST 2 -#define RADEON_TRAIL_BRES_DEC 0x1614 -#define RADEON_TRAIL_BRES_ERR 0x160c -#define RADEON_TRAIL_BRES_INC 0x1610 -#define RADEON_TRAIL_X 0x1618 -#define RADEON_TRAIL_X_SUB 0x1620 - -#define RADEON_VCLK_ECP_CNTL 0x0008 /* PLL */ -# define RADEON_VCLK_SRC_SEL_MASK 0x03 -# define RADEON_VCLK_SRC_SEL_CPUCLK 0x00 -# define RADEON_VCLK_SRC_SEL_PSCANCLK 0x01 -# define RADEON_VCLK_SRC_SEL_BYTECLK 0x02 -# define RADEON_VCLK_SRC_SEL_PPLLCLK 0x03 -# define RADEON_PIXCLK_ALWAYS_ONb (1<<6) -# define RADEON_PIXCLK_DAC_ALWAYS_ONb (1<<7) - -#define RADEON_VENDOR_ID 0x0f00 /* PCI */ -#define RADEON_VGA_DDA_CONFIG 0x02e8 -#define RADEON_VGA_DDA_ON_OFF 0x02ec -#define RADEON_VID_BUFFER_CONTROL 0x0900 -#define RADEON_VIDEOMUX_CNTL 0x0190 -#define RADEON_VIPH_CONTROL 0x0c40 /* ? */ - -#define RADEON_WAIT_UNTIL 0x1720 -# define RADEON_WAIT_CRTC_PFLIP (1 << 0) -# define RADEON_WAIT_2D_IDLECLEAN (1 << 16) -# define RADEON_WAIT_3D_IDLECLEAN (1 << 17) -# define RADEON_WAIT_HOST_IDLECLEAN (1 << 18) - -#define RADEON_X_MPLL_REF_FB_DIV 0x000a /* PLL */ -#define RADEON_XCLK_CNTL 0x000d /* PLL */ -#define RADEON_XDLL_CNTL 0x000c /* PLL */ -#define RADEON_XPLL_CNTL 0x000b /* PLL */ - - - - /* Registers for 3D/TCL */ -#define RADEON_PP_BORDER_COLOR_0 0x1d40 -#define RADEON_PP_BORDER_COLOR_1 0x1d44 -#define RADEON_PP_BORDER_COLOR_2 0x1d48 -#define RADEON_PP_CNTL 0x1c38 -# define RADEON_STIPPLE_ENABLE (1 << 0) -# define RADEON_SCISSOR_ENABLE (1 << 1) -# define RADEON_PATTERN_ENABLE (1 << 2) -# define RADEON_SHADOW_ENABLE (1 << 3) -# define RADEON_TEX_ENABLE_MASK (0xf << 4) -# define RADEON_TEX_0_ENABLE (1 << 4) -# define RADEON_TEX_1_ENABLE (1 << 5) -# define RADEON_TEX_2_ENABLE (1 << 6) -# define RADEON_TEX_3_ENABLE (1 << 7) -# define RADEON_TEX_BLEND_ENABLE_MASK (0xf << 12) -# define RADEON_TEX_BLEND_0_ENABLE (1 << 12) -# define RADEON_TEX_BLEND_1_ENABLE (1 << 13) -# define RADEON_TEX_BLEND_2_ENABLE (1 << 14) -# define RADEON_TEX_BLEND_3_ENABLE (1 << 15) -# define RADEON_PLANAR_YUV_ENABLE (1 << 20) -# define RADEON_SPECULAR_ENABLE (1 << 21) -# define RADEON_FOG_ENABLE (1 << 22) -# define RADEON_ALPHA_TEST_ENABLE (1 << 23) -# define RADEON_ANTI_ALIAS_NONE (0 << 24) -# define RADEON_ANTI_ALIAS_LINE (1 << 24) -# define RADEON_ANTI_ALIAS_POLY (2 << 24) -# define RADEON_ANTI_ALIAS_LINE_POLY (3 << 24) -# define RADEON_BUMP_MAP_ENABLE (1 << 26) -# define RADEON_BUMPED_MAP_T0 (0 << 27) -# define RADEON_BUMPED_MAP_T1 (1 << 27) -# define RADEON_BUMPED_MAP_T2 (2 << 27) -# define RADEON_TEX_3D_ENABLE_0 (1 << 29) -# define RADEON_TEX_3D_ENABLE_1 (1 << 30) -# define RADEON_MC_ENABLE (1 << 31) -#define RADEON_PP_FOG_COLOR 0x1c18 -# define RADEON_FOG_COLOR_MASK 0x00ffffff -# define RADEON_FOG_VERTEX (0 << 24) -# define RADEON_FOG_TABLE (1 << 24) -# define RADEON_FOG_USE_DEPTH (0 << 25) -# define RADEON_FOG_USE_DIFFUSE_ALPHA (2 << 25) -# define RADEON_FOG_USE_SPEC_ALPHA (3 << 25) -#define RADEON_PP_LUM_MATRIX 0x1d00 -#define RADEON_PP_MISC 0x1c14 -# define RADEON_REF_ALPHA_MASK 0x000000ff -# define RADEON_ALPHA_TEST_FAIL (0 << 8) -# define RADEON_ALPHA_TEST_LESS (1 << 8) -# define RADEON_ALPHA_TEST_LEQUAL (2 << 8) -# define RADEON_ALPHA_TEST_EQUAL (3 << 8) -# define RADEON_ALPHA_TEST_GEQUAL (4 << 8) -# define RADEON_ALPHA_TEST_GREATER (5 << 8) -# define RADEON_ALPHA_TEST_NEQUAL (6 << 8) -# define RADEON_ALPHA_TEST_PASS (7 << 8) -# define RADEON_ALPHA_TEST_OP_MASK (7 << 8) -# define RADEON_CHROMA_FUNC_FAIL (0 << 16) -# define RADEON_CHROMA_FUNC_PASS (1 << 16) -# define RADEON_CHROMA_FUNC_NEQUAL (2 << 16) -# define RADEON_CHROMA_FUNC_EQUAL (3 << 16) -# define RADEON_CHROMA_KEY_NEAREST (0 << 18) -# define RADEON_CHROMA_KEY_ZERO (1 << 18) -# define RADEON_SHADOW_ID_AUTO_INC (1 << 20) -# define RADEON_SHADOW_FUNC_EQUAL (0 << 21) -# define RADEON_SHADOW_FUNC_NEQUAL (1 << 21) -# define RADEON_SHADOW_PASS_1 (0 << 22) -# define RADEON_SHADOW_PASS_2 (1 << 22) -# define RADEON_RIGHT_HAND_CUBE_D3D (0 << 24) -# define RADEON_RIGHT_HAND_CUBE_OGL (1 << 24) -#define RADEON_PP_ROT_MATRIX_0 0x1d58 -#define RADEON_PP_ROT_MATRIX_1 0x1d5c -#define RADEON_PP_TXFILTER_0 0x1c54 -#define RADEON_PP_TXFILTER_1 0x1c6c -#define RADEON_PP_TXFILTER_2 0x1c84 -# define RADEON_MAG_FILTER_NEAREST (0 << 0) -# define RADEON_MAG_FILTER_LINEAR (1 << 0) -# define RADEON_MAG_FILTER_MASK (1 << 0) -# define RADEON_MIN_FILTER_NEAREST (0 << 1) -# define RADEON_MIN_FILTER_LINEAR (1 << 1) -# define RADEON_MIN_FILTER_NEAREST_MIP_NEAREST (2 << 1) -# define RADEON_MIN_FILTER_NEAREST_MIP_LINEAR (3 << 1) -# define RADEON_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 1) -# define RADEON_MIN_FILTER_LINEAR_MIP_LINEAR (7 << 1) -# define RADEON_MIN_FILTER_ANISO_NEAREST (8 << 1) -# define RADEON_MIN_FILTER_ANISO_LINEAR (9 << 1) -# define RADEON_MIN_FILTER_ANISO_NEAREST_MIP_NEAREST (10 << 1) -# define RADEON_MIN_FILTER_ANISO_NEAREST_MIP_LINEAR (11 << 1) -# define RADEON_MIN_FILTER_MASK (15 << 1) -# define RADEON_MAX_ANISO_1_TO_1 (0 << 5) -# define RADEON_MAX_ANISO_2_TO_1 (1 << 5) -# define RADEON_MAX_ANISO_4_TO_1 (2 << 5) -# define RADEON_MAX_ANISO_8_TO_1 (3 << 5) -# define RADEON_MAX_ANISO_16_TO_1 (4 << 5) -# define RADEON_MAX_ANISO_MASK (7 << 5) -# define RADEON_LOD_BIAS_MASK (0xff << 8) -# define RADEON_LOD_BIAS_SHIFT 8 -# define RADEON_MAX_MIP_LEVEL_MASK (0x0f << 16) -# define RADEON_MAX_MIP_LEVEL_SHIFT 16 -# define RADEON_YUV_TO_RGB (1 << 20) -# define RADEON_YUV_TEMPERATURE_COOL (0 << 21) -# define RADEON_YUV_TEMPERATURE_HOT (1 << 21) -# define RADEON_YUV_TEMPERATURE_MASK (1 << 21) -# define RADEON_WRAPEN_S (1 << 22) -# define RADEON_CLAMP_S_WRAP (0 << 23) -# define RADEON_CLAMP_S_MIRROR (1 << 23) -# define RADEON_CLAMP_S_CLAMP_LAST (2 << 23) -# define RADEON_CLAMP_S_MIRROR_CLAMP_LAST (3 << 23) -# define RADEON_CLAMP_S_CLAMP_BORDER (4 << 23) -# define RADEON_CLAMP_S_MIRROR_CLAMP_BORDER (5 << 23) -# define RADEON_CLAMP_S_CLAMP_GL (6 << 23) -# define RADEON_CLAMP_S_MIRROR_CLAMP_GL (7 << 23) -# define RADEON_CLAMP_S_MASK (7 << 23) -# define RADEON_WRAPEN_T (1 << 26) -# define RADEON_CLAMP_T_WRAP (0 << 27) -# define RADEON_CLAMP_T_MIRROR (1 << 27) -# define RADEON_CLAMP_T_CLAMP_LAST (2 << 27) -# define RADEON_CLAMP_T_MIRROR_CLAMP_LAST (3 << 27) -# define RADEON_CLAMP_T_CLAMP_BORDER (4 << 27) -# define RADEON_CLAMP_T_MIRROR_CLAMP_BORDER (5 << 27) -# define RADEON_CLAMP_T_CLAMP_GL (6 << 27) -# define RADEON_CLAMP_T_MIRROR_CLAMP_GL (7 << 27) -# define RADEON_CLAMP_T_MASK (7 << 27) -# define RADEON_BORDER_MODE_OGL (0 << 31) -# define RADEON_BORDER_MODE_D3D (1 << 31) -#define RADEON_PP_TXFORMAT_0 0x1c58 -#define RADEON_PP_TXFORMAT_1 0x1c70 -#define RADEON_PP_TXFORMAT_2 0x1c88 -# define RADEON_TXFORMAT_I8 (0 << 0) -# define RADEON_TXFORMAT_AI88 (1 << 0) -# define RADEON_TXFORMAT_RGB332 (2 << 0) -# define RADEON_TXFORMAT_ARGB1555 (3 << 0) -# define RADEON_TXFORMAT_RGB565 (4 << 0) -# define RADEON_TXFORMAT_ARGB4444 (5 << 0) -# define RADEON_TXFORMAT_ARGB8888 (6 << 0) -# define RADEON_TXFORMAT_RGBA8888 (7 << 0) -# define RADEON_TXFORMAT_Y8 (8 << 0) -# define RADEON_TXFORMAT_VYUY422 (10 << 0) -# define RADEON_TXFORMAT_YVYU422 (11 << 0) -# define RADEON_TXFORMAT_DXT1 (12 << 0) -# define RADEON_TXFORMAT_DXT23 (14 << 0) -# define RADEON_TXFORMAT_DXT45 (15 << 0) -# define RADEON_TXFORMAT_FORMAT_MASK (31 << 0) -# define RADEON_TXFORMAT_FORMAT_SHIFT 0 -# define RADEON_TXFORMAT_APPLE_YUV_MODE (1 << 5) -# define RADEON_TXFORMAT_ALPHA_IN_MAP (1 << 6) -# define RADEON_TXFORMAT_NON_POWER2 (1 << 7) -# define RADEON_TXFORMAT_WIDTH_MASK (15 << 8) -# define RADEON_TXFORMAT_WIDTH_SHIFT 8 -# define RADEON_TXFORMAT_HEIGHT_MASK (15 << 12) -# define RADEON_TXFORMAT_HEIGHT_SHIFT 12 -# define RADEON_TXFORMAT_F5_WIDTH_MASK (15 << 16) -# define RADEON_TXFORMAT_F5_WIDTH_SHIFT 16 -# define RADEON_TXFORMAT_F5_HEIGHT_MASK (15 << 20) -# define RADEON_TXFORMAT_F5_HEIGHT_SHIFT 20 -# define RADEON_TXFORMAT_ST_ROUTE_STQ0 (0 << 24) -# define RADEON_TXFORMAT_ST_ROUTE_MASK (3 << 24) -# define RADEON_TXFORMAT_ST_ROUTE_STQ1 (1 << 24) -# define RADEON_TXFORMAT_ST_ROUTE_STQ2 (2 << 24) -# define RADEON_TXFORMAT_ENDIAN_NO_SWAP (0 << 26) -# define RADEON_TXFORMAT_ENDIAN_16BPP_SWAP (1 << 26) -# define RADEON_TXFORMAT_ENDIAN_32BPP_SWAP (2 << 26) -# define RADEON_TXFORMAT_ENDIAN_HALFDW_SWAP (3 << 26) -# define RADEON_TXFORMAT_ALPHA_MASK_ENABLE (1 << 28) -# define RADEON_TXFORMAT_CHROMA_KEY_ENABLE (1 << 29) -# define RADEON_TXFORMAT_CUBIC_MAP_ENABLE (1 << 30) -# define RADEON_TXFORMAT_PERSPECTIVE_ENABLE (1 << 31) -#define RADEON_PP_CUBIC_FACES_0 0x1d24 -#define RADEON_PP_CUBIC_FACES_1 0x1d28 -#define RADEON_PP_CUBIC_FACES_2 0x1d2c -# define RADEON_FACE_WIDTH_1_SHIFT 0 -# define RADEON_FACE_HEIGHT_1_SHIFT 4 -# define RADEON_FACE_WIDTH_1_MASK (0xf << 0) -# define RADEON_FACE_HEIGHT_1_MASK (0xf << 4) -# define RADEON_FACE_WIDTH_2_SHIFT 8 -# define RADEON_FACE_HEIGHT_2_SHIFT 12 -# define RADEON_FACE_WIDTH_2_MASK (0xf << 8) -# define RADEON_FACE_HEIGHT_2_MASK (0xf << 12) -# define RADEON_FACE_WIDTH_3_SHIFT 16 -# define RADEON_FACE_HEIGHT_3_SHIFT 20 -# define RADEON_FACE_WIDTH_3_MASK (0xf << 16) -# define RADEON_FACE_HEIGHT_3_MASK (0xf << 20) -# define RADEON_FACE_WIDTH_4_SHIFT 24 -# define RADEON_FACE_HEIGHT_4_SHIFT 28 -# define RADEON_FACE_WIDTH_4_MASK (0xf << 24) -# define RADEON_FACE_HEIGHT_4_MASK (0xf << 28) - -#define RADEON_PP_TXOFFSET_0 0x1c5c -#define RADEON_PP_TXOFFSET_1 0x1c74 -#define RADEON_PP_TXOFFSET_2 0x1c8c -# define RADEON_TXO_ENDIAN_NO_SWAP (0 << 0) -# define RADEON_TXO_ENDIAN_BYTE_SWAP (1 << 0) -# define RADEON_TXO_ENDIAN_WORD_SWAP (2 << 0) -# define RADEON_TXO_ENDIAN_HALFDW_SWAP (3 << 0) -# define RADEON_TXO_MACRO_LINEAR (0 << 2) -# define RADEON_TXO_MACRO_TILE (1 << 2) -# define RADEON_TXO_MICRO_LINEAR (0 << 3) -# define RADEON_TXO_MICRO_TILE_X2 (1 << 3) -# define RADEON_TXO_MICRO_TILE_OPT (2 << 3) -# define RADEON_TXO_OFFSET_MASK 0xffffffe0 -# define RADEON_TXO_OFFSET_SHIFT 5 - -#define RADEON_PP_CUBIC_OFFSET_T0_0 0x1dd0 /* bits [31:5] */ -#define RADEON_PP_CUBIC_OFFSET_T0_1 0x1dd4 -#define RADEON_PP_CUBIC_OFFSET_T0_2 0x1dd8 -#define RADEON_PP_CUBIC_OFFSET_T0_3 0x1ddc -#define RADEON_PP_CUBIC_OFFSET_T0_4 0x1de0 -#define RADEON_PP_CUBIC_OFFSET_T1_0 0x1e00 -#define RADEON_PP_CUBIC_OFFSET_T1_1 0x1e04 -#define RADEON_PP_CUBIC_OFFSET_T1_2 0x1e08 -#define RADEON_PP_CUBIC_OFFSET_T1_3 0x1e0c -#define RADEON_PP_CUBIC_OFFSET_T1_4 0x1e10 -#define RADEON_PP_CUBIC_OFFSET_T2_0 0x1e14 -#define RADEON_PP_CUBIC_OFFSET_T2_1 0x1e18 -#define RADEON_PP_CUBIC_OFFSET_T2_2 0x1e1c -#define RADEON_PP_CUBIC_OFFSET_T2_3 0x1e20 -#define RADEON_PP_CUBIC_OFFSET_T2_4 0x1e24 - -#define RADEON_PP_TEX_SIZE_0 0x1d04 /* NPOT */ -#define RADEON_PP_TEX_SIZE_1 0x1d0c -#define RADEON_PP_TEX_SIZE_2 0x1d14 -# define RADEON_TEX_USIZE_MASK (0x7ff << 0) -# define RADEON_TEX_USIZE_SHIFT 0 -# define RADEON_TEX_VSIZE_MASK (0x7ff << 16) -# define RADEON_TEX_VSIZE_SHIFT 16 -# define RADEON_SIGNED_RGB_MASK (1 << 30) -# define RADEON_SIGNED_RGB_SHIFT 30 -# define RADEON_SIGNED_ALPHA_MASK (1 << 31) -# define RADEON_SIGNED_ALPHA_SHIFT 31 -#define RADEON_PP_TEX_PITCH_0 0x1d08 /* NPOT */ -#define RADEON_PP_TEX_PITCH_1 0x1d10 /* NPOT */ -#define RADEON_PP_TEX_PITCH_2 0x1d18 /* NPOT */ -/* note: bits 13-5: 32 byte aligned stride of texture map */ - -#define RADEON_PP_TXCBLEND_0 0x1c60 -#define RADEON_PP_TXCBLEND_1 0x1c78 -#define RADEON_PP_TXCBLEND_2 0x1c90 -# define RADEON_COLOR_ARG_A_SHIFT 0 -# define RADEON_COLOR_ARG_A_MASK (0x1f << 0) -# define RADEON_COLOR_ARG_A_ZERO (0 << 0) -# define RADEON_COLOR_ARG_A_CURRENT_COLOR (2 << 0) -# define RADEON_COLOR_ARG_A_CURRENT_ALPHA (3 << 0) -# define RADEON_COLOR_ARG_A_DIFFUSE_COLOR (4 << 0) -# define RADEON_COLOR_ARG_A_DIFFUSE_ALPHA (5 << 0) -# define RADEON_COLOR_ARG_A_SPECULAR_COLOR (6 << 0) -# define RADEON_COLOR_ARG_A_SPECULAR_ALPHA (7 << 0) -# define RADEON_COLOR_ARG_A_TFACTOR_COLOR (8 << 0) -# define RADEON_COLOR_ARG_A_TFACTOR_ALPHA (9 << 0) -# define RADEON_COLOR_ARG_A_T0_COLOR (10 << 0) -# define RADEON_COLOR_ARG_A_T0_ALPHA (11 << 0) -# define RADEON_COLOR_ARG_A_T1_COLOR (12 << 0) -# define RADEON_COLOR_ARG_A_T1_ALPHA (13 << 0) -# define RADEON_COLOR_ARG_A_T2_COLOR (14 << 0) -# define RADEON_COLOR_ARG_A_T2_ALPHA (15 << 0) -# define RADEON_COLOR_ARG_A_T3_COLOR (16 << 0) -# define RADEON_COLOR_ARG_A_T3_ALPHA (17 << 0) -# define RADEON_COLOR_ARG_B_SHIFT 5 -# define RADEON_COLOR_ARG_B_MASK (0x1f << 5) -# define RADEON_COLOR_ARG_B_ZERO (0 << 5) -# define RADEON_COLOR_ARG_B_CURRENT_COLOR (2 << 5) -# define RADEON_COLOR_ARG_B_CURRENT_ALPHA (3 << 5) -# define RADEON_COLOR_ARG_B_DIFFUSE_COLOR (4 << 5) -# define RADEON_COLOR_ARG_B_DIFFUSE_ALPHA (5 << 5) -# define RADEON_COLOR_ARG_B_SPECULAR_COLOR (6 << 5) -# define RADEON_COLOR_ARG_B_SPECULAR_ALPHA (7 << 5) -# define RADEON_COLOR_ARG_B_TFACTOR_COLOR (8 << 5) -# define RADEON_COLOR_ARG_B_TFACTOR_ALPHA (9 << 5) -# define RADEON_COLOR_ARG_B_T0_COLOR (10 << 5) -# define RADEON_COLOR_ARG_B_T0_ALPHA (11 << 5) -# define RADEON_COLOR_ARG_B_T1_COLOR (12 << 5) -# define RADEON_COLOR_ARG_B_T1_ALPHA (13 << 5) -# define RADEON_COLOR_ARG_B_T2_COLOR (14 << 5) -# define RADEON_COLOR_ARG_B_T2_ALPHA (15 << 5) -# define RADEON_COLOR_ARG_B_T3_COLOR (16 << 5) -# define RADEON_COLOR_ARG_B_T3_ALPHA (17 << 5) -# define RADEON_COLOR_ARG_C_SHIFT 10 -# define RADEON_COLOR_ARG_C_MASK (0x1f << 10) -# define RADEON_COLOR_ARG_C_ZERO (0 << 10) -# define RADEON_COLOR_ARG_C_CURRENT_COLOR (2 << 10) -# define RADEON_COLOR_ARG_C_CURRENT_ALPHA (3 << 10) -# define RADEON_COLOR_ARG_C_DIFFUSE_COLOR (4 << 10) -# define RADEON_COLOR_ARG_C_DIFFUSE_ALPHA (5 << 10) -# define RADEON_COLOR_ARG_C_SPECULAR_COLOR (6 << 10) -# define RADEON_COLOR_ARG_C_SPECULAR_ALPHA (7 << 10) -# define RADEON_COLOR_ARG_C_TFACTOR_COLOR (8 << 10) -# define RADEON_COLOR_ARG_C_TFACTOR_ALPHA (9 << 10) -# define RADEON_COLOR_ARG_C_T0_COLOR (10 << 10) -# define RADEON_COLOR_ARG_C_T0_ALPHA (11 << 10) -# define RADEON_COLOR_ARG_C_T1_COLOR (12 << 10) -# define RADEON_COLOR_ARG_C_T1_ALPHA (13 << 10) -# define RADEON_COLOR_ARG_C_T2_COLOR (14 << 10) -# define RADEON_COLOR_ARG_C_T2_ALPHA (15 << 10) -# define RADEON_COLOR_ARG_C_T3_COLOR (16 << 10) -# define RADEON_COLOR_ARG_C_T3_ALPHA (17 << 10) -# define RADEON_COMP_ARG_A (1 << 15) -# define RADEON_COMP_ARG_A_SHIFT 15 -# define RADEON_COMP_ARG_B (1 << 16) -# define RADEON_COMP_ARG_B_SHIFT 16 -# define RADEON_COMP_ARG_C (1 << 17) -# define RADEON_COMP_ARG_C_SHIFT 17 -# define RADEON_BLEND_CTL_MASK (7 << 18) -# define RADEON_BLEND_CTL_ADD (0 << 18) -# define RADEON_BLEND_CTL_SUBTRACT (1 << 18) -# define RADEON_BLEND_CTL_ADDSIGNED (2 << 18) -# define RADEON_BLEND_CTL_BLEND (3 << 18) -# define RADEON_BLEND_CTL_DOT3 (4 << 18) -# define RADEON_SCALE_SHIFT 21 -# define RADEON_SCALE_MASK (3 << 21) -# define RADEON_SCALE_1X (0 << 21) -# define RADEON_SCALE_2X (1 << 21) -# define RADEON_SCALE_4X (2 << 21) -# define RADEON_CLAMP_TX (1 << 23) -# define RADEON_T0_EQ_TCUR (1 << 24) -# define RADEON_T1_EQ_TCUR (1 << 25) -# define RADEON_T2_EQ_TCUR (1 << 26) -# define RADEON_T3_EQ_TCUR (1 << 27) -# define RADEON_COLOR_ARG_MASK 0x1f -# define RADEON_COMP_ARG_SHIFT 15 -#define RADEON_PP_TXABLEND_0 0x1c64 -#define RADEON_PP_TXABLEND_1 0x1c7c -#define RADEON_PP_TXABLEND_2 0x1c94 -# define RADEON_ALPHA_ARG_A_SHIFT 0 -# define RADEON_ALPHA_ARG_A_MASK (0xf << 0) -# define RADEON_ALPHA_ARG_A_ZERO (0 << 0) -# define RADEON_ALPHA_ARG_A_CURRENT_ALPHA (1 << 0) -# define RADEON_ALPHA_ARG_A_DIFFUSE_ALPHA (2 << 0) -# define RADEON_ALPHA_ARG_A_SPECULAR_ALPHA (3 << 0) -# define RADEON_ALPHA_ARG_A_TFACTOR_ALPHA (4 << 0) -# define RADEON_ALPHA_ARG_A_T0_ALPHA (5 << 0) -# define RADEON_ALPHA_ARG_A_T1_ALPHA (6 << 0) -# define RADEON_ALPHA_ARG_A_T2_ALPHA (7 << 0) -# define RADEON_ALPHA_ARG_A_T3_ALPHA (8 << 0) -# define RADEON_ALPHA_ARG_B_SHIFT 4 -# define RADEON_ALPHA_ARG_B_MASK (0xf << 4) -# define RADEON_ALPHA_ARG_B_ZERO (0 << 4) -# define RADEON_ALPHA_ARG_B_CURRENT_ALPHA (1 << 4) -# define RADEON_ALPHA_ARG_B_DIFFUSE_ALPHA (2 << 4) -# define RADEON_ALPHA_ARG_B_SPECULAR_ALPHA (3 << 4) -# define RADEON_ALPHA_ARG_B_TFACTOR_ALPHA (4 << 4) -# define RADEON_ALPHA_ARG_B_T0_ALPHA (5 << 4) -# define RADEON_ALPHA_ARG_B_T1_ALPHA (6 << 4) -# define RADEON_ALPHA_ARG_B_T2_ALPHA (7 << 4) -# define RADEON_ALPHA_ARG_B_T3_ALPHA (8 << 4) -# define RADEON_ALPHA_ARG_C_SHIFT 8 -# define RADEON_ALPHA_ARG_C_MASK (0xf << 8) -# define RADEON_ALPHA_ARG_C_ZERO (0 << 8) -# define RADEON_ALPHA_ARG_C_CURRENT_ALPHA (1 << 8) -# define RADEON_ALPHA_ARG_C_DIFFUSE_ALPHA (2 << 8) -# define RADEON_ALPHA_ARG_C_SPECULAR_ALPHA (3 << 8) -# define RADEON_ALPHA_ARG_C_TFACTOR_ALPHA (4 << 8) -# define RADEON_ALPHA_ARG_C_T0_ALPHA (5 << 8) -# define RADEON_ALPHA_ARG_C_T1_ALPHA (6 << 8) -# define RADEON_ALPHA_ARG_C_T2_ALPHA (7 << 8) -# define RADEON_ALPHA_ARG_C_T3_ALPHA (8 << 8) -# define RADEON_DOT_ALPHA_DONT_REPLICATE (1 << 9) -# define RADEON_ALPHA_ARG_MASK 0xf - -#define RADEON_PP_TFACTOR_0 0x1c68 -#define RADEON_PP_TFACTOR_1 0x1c80 -#define RADEON_PP_TFACTOR_2 0x1c98 - -#define RADEON_RB3D_BLENDCNTL 0x1c20 -# define RADEON_COMB_FCN_MASK (3 << 12) -# define RADEON_COMB_FCN_ADD_CLAMP (0 << 12) -# define RADEON_COMB_FCN_ADD_NOCLAMP (1 << 12) -# define RADEON_COMB_FCN_SUB_CLAMP (2 << 12) -# define RADEON_COMB_FCN_SUB_NOCLAMP (3 << 12) -# define RADEON_SRC_BLEND_GL_ZERO (32 << 16) -# define RADEON_SRC_BLEND_GL_ONE (33 << 16) -# define RADEON_SRC_BLEND_GL_SRC_COLOR (34 << 16) -# define RADEON_SRC_BLEND_GL_ONE_MINUS_SRC_COLOR (35 << 16) -# define RADEON_SRC_BLEND_GL_DST_COLOR (36 << 16) -# define RADEON_SRC_BLEND_GL_ONE_MINUS_DST_COLOR (37 << 16) -# define RADEON_SRC_BLEND_GL_SRC_ALPHA (38 << 16) -# define RADEON_SRC_BLEND_GL_ONE_MINUS_SRC_ALPHA (39 << 16) -# define RADEON_SRC_BLEND_GL_DST_ALPHA (40 << 16) -# define RADEON_SRC_BLEND_GL_ONE_MINUS_DST_ALPHA (41 << 16) -# define RADEON_SRC_BLEND_GL_SRC_ALPHA_SATURATE (42 << 16) -# define RADEON_SRC_BLEND_MASK (63 << 16) -# define RADEON_DST_BLEND_GL_ZERO (32 << 24) -# define RADEON_DST_BLEND_GL_ONE (33 << 24) -# define RADEON_DST_BLEND_GL_SRC_COLOR (34 << 24) -# define RADEON_DST_BLEND_GL_ONE_MINUS_SRC_COLOR (35 << 24) -# define RADEON_DST_BLEND_GL_DST_COLOR (36 << 24) -# define RADEON_DST_BLEND_GL_ONE_MINUS_DST_COLOR (37 << 24) -# define RADEON_DST_BLEND_GL_SRC_ALPHA (38 << 24) -# define RADEON_DST_BLEND_GL_ONE_MINUS_SRC_ALPHA (39 << 24) -# define RADEON_DST_BLEND_GL_DST_ALPHA (40 << 24) -# define RADEON_DST_BLEND_GL_ONE_MINUS_DST_ALPHA (41 << 24) -# define RADEON_DST_BLEND_MASK (63 << 24) -#define RADEON_RB3D_CNTL 0x1c3c -# define RADEON_ALPHA_BLEND_ENABLE (1 << 0) -# define RADEON_PLANE_MASK_ENABLE (1 << 1) -# define RADEON_DITHER_ENABLE (1 << 2) -# define RADEON_ROUND_ENABLE (1 << 3) -# define RADEON_SCALE_DITHER_ENABLE (1 << 4) -# define RADEON_DITHER_INIT (1 << 5) -# define RADEON_ROP_ENABLE (1 << 6) -# define RADEON_STENCIL_ENABLE (1 << 7) -# define RADEON_Z_ENABLE (1 << 8) -# define RADEON_DEPTH_XZ_OFFEST_ENABLE (1 << 9) -# define RADEON_COLOR_FORMAT_ARGB1555 (3 << 10) -# define RADEON_COLOR_FORMAT_RGB565 (4 << 10) -# define RADEON_COLOR_FORMAT_ARGB8888 (6 << 10) -# define RADEON_COLOR_FORMAT_RGB332 (7 << 10) -# define RADEON_COLOR_FORMAT_Y8 (8 << 10) -# define RADEON_COLOR_FORMAT_RGB8 (9 << 10) -# define RADEON_COLOR_FORMAT_YUV422_VYUY (11 << 10) -# define RADEON_COLOR_FORMAT_YUV422_YVYU (12 << 10) -# define RADEON_COLOR_FORMAT_aYUV444 (14 << 10) -# define RADEON_COLOR_FORMAT_ARGB4444 (15 << 10) -# define RADEON_CLRCMP_FLIP_ENABLE (1 << 14) -#define RADEON_RB3D_COLOROFFSET 0x1c40 -# define RADEON_COLOROFFSET_MASK 0xfffffff0 -#define RADEON_RB3D_COLORPITCH 0x1c48 -# define RADEON_COLORPITCH_MASK 0x000001ff8 -# define RADEON_COLOR_TILE_ENABLE (1 << 16) -# define RADEON_COLOR_MICROTILE_ENABLE (1 << 17) -# define RADEON_COLOR_ENDIAN_NO_SWAP (0 << 18) -# define RADEON_COLOR_ENDIAN_WORD_SWAP (1 << 18) -# define RADEON_COLOR_ENDIAN_DWORD_SWAP (2 << 18) -#define RADEON_RB3D_DEPTHOFFSET 0x1c24 -#define RADEON_RB3D_DEPTHPITCH 0x1c28 -# define RADEON_DEPTHPITCH_MASK 0x00001ff8 -# define RADEON_DEPTH_ENDIAN_NO_SWAP (0 << 18) -# define RADEON_DEPTH_ENDIAN_WORD_SWAP (1 << 18) -# define RADEON_DEPTH_ENDIAN_DWORD_SWAP (2 << 18) -#define RADEON_RB3D_PLANEMASK 0x1d84 -#define RADEON_RB3D_ROPCNTL 0x1d80 -# define RADEON_ROP_MASK (15 << 8) -# define RADEON_ROP_CLEAR (0 << 8) -# define RADEON_ROP_NOR (1 << 8) -# define RADEON_ROP_AND_INVERTED (2 << 8) -# define RADEON_ROP_COPY_INVERTED (3 << 8) -# define RADEON_ROP_AND_REVERSE (4 << 8) -# define RADEON_ROP_INVERT (5 << 8) -# define RADEON_ROP_XOR (6 << 8) -# define RADEON_ROP_NAND (7 << 8) -# define RADEON_ROP_AND (8 << 8) -# define RADEON_ROP_EQUIV (9 << 8) -# define RADEON_ROP_NOOP (10 << 8) -# define RADEON_ROP_OR_INVERTED (11 << 8) -# define RADEON_ROP_COPY (12 << 8) -# define RADEON_ROP_OR_REVERSE (13 << 8) -# define RADEON_ROP_OR (14 << 8) -# define RADEON_ROP_SET (15 << 8) -#define RADEON_RB3D_STENCILREFMASK 0x1d7c -# define RADEON_STENCIL_REF_SHIFT 0 -# define RADEON_STENCIL_REF_MASK (0xff << 0) -# define RADEON_STENCIL_MASK_SHIFT 16 -# define RADEON_STENCIL_VALUE_MASK (0xff << 16) -# define RADEON_STENCIL_WRITEMASK_SHIFT 24 -# define RADEON_STENCIL_WRITE_MASK (0xff << 24) -#define RADEON_RB3D_ZSTENCILCNTL 0x1c2c -# define RADEON_DEPTH_FORMAT_MASK (0xf << 0) -# define RADEON_DEPTH_FORMAT_16BIT_INT_Z (0 << 0) -# define RADEON_DEPTH_FORMAT_24BIT_INT_Z (2 << 0) -# define RADEON_DEPTH_FORMAT_24BIT_FLOAT_Z (3 << 0) -# define RADEON_DEPTH_FORMAT_32BIT_INT_Z (4 << 0) -# define RADEON_DEPTH_FORMAT_32BIT_FLOAT_Z (5 << 0) -# define RADEON_DEPTH_FORMAT_16BIT_FLOAT_W (7 << 0) -# define RADEON_DEPTH_FORMAT_24BIT_FLOAT_W (9 << 0) -# define RADEON_DEPTH_FORMAT_32BIT_FLOAT_W (11 << 0) -# define RADEON_Z_TEST_NEVER (0 << 4) -# define RADEON_Z_TEST_LESS (1 << 4) -# define RADEON_Z_TEST_LEQUAL (2 << 4) -# define RADEON_Z_TEST_EQUAL (3 << 4) -# define RADEON_Z_TEST_GEQUAL (4 << 4) -# define RADEON_Z_TEST_GREATER (5 << 4) -# define RADEON_Z_TEST_NEQUAL (6 << 4) -# define RADEON_Z_TEST_ALWAYS (7 << 4) -# define RADEON_Z_TEST_MASK (7 << 4) -# define RADEON_STENCIL_TEST_NEVER (0 << 12) -# define RADEON_STENCIL_TEST_LESS (1 << 12) -# define RADEON_STENCIL_TEST_LEQUAL (2 << 12) -# define RADEON_STENCIL_TEST_EQUAL (3 << 12) -# define RADEON_STENCIL_TEST_GEQUAL (4 << 12) -# define RADEON_STENCIL_TEST_GREATER (5 << 12) -# define RADEON_STENCIL_TEST_NEQUAL (6 << 12) -# define RADEON_STENCIL_TEST_ALWAYS (7 << 12) -# define RADEON_STENCIL_TEST_MASK (0x7 << 12) -# define RADEON_STENCIL_FAIL_KEEP (0 << 16) -# define RADEON_STENCIL_FAIL_ZERO (1 << 16) -# define RADEON_STENCIL_FAIL_REPLACE (2 << 16) -# define RADEON_STENCIL_FAIL_INC (3 << 16) -# define RADEON_STENCIL_FAIL_DEC (4 << 16) -# define RADEON_STENCIL_FAIL_INVERT (5 << 16) -# define RADEON_STENCIL_FAIL_MASK (0x7 << 16) -# define RADEON_STENCIL_ZPASS_KEEP (0 << 20) -# define RADEON_STENCIL_ZPASS_ZERO (1 << 20) -# define RADEON_STENCIL_ZPASS_REPLACE (2 << 20) -# define RADEON_STENCIL_ZPASS_INC (3 << 20) -# define RADEON_STENCIL_ZPASS_DEC (4 << 20) -# define RADEON_STENCIL_ZPASS_INVERT (5 << 20) -# define RADEON_STENCIL_ZPASS_MASK (0x7 << 20) -# define RADEON_STENCIL_ZFAIL_KEEP (0 << 24) -# define RADEON_STENCIL_ZFAIL_ZERO (1 << 24) -# define RADEON_STENCIL_ZFAIL_REPLACE (2 << 24) -# define RADEON_STENCIL_ZFAIL_INC (3 << 24) -# define RADEON_STENCIL_ZFAIL_DEC (4 << 24) -# define RADEON_STENCIL_ZFAIL_INVERT (5 << 24) -# define RADEON_STENCIL_ZFAIL_MASK (0x7 << 24) -# define RADEON_Z_COMPRESSION_ENABLE (1 << 28) -# define RADEON_FORCE_Z_DIRTY (1 << 29) -# define RADEON_Z_WRITE_ENABLE (1 << 30) -#define RADEON_RE_LINE_PATTERN 0x1cd0 -# define RADEON_LINE_PATTERN_MASK 0x0000ffff -# define RADEON_LINE_REPEAT_COUNT_SHIFT 16 -# define RADEON_LINE_PATTERN_START_SHIFT 24 -# define RADEON_LINE_PATTERN_LITTLE_BIT_ORDER (0 << 28) -# define RADEON_LINE_PATTERN_BIG_BIT_ORDER (1 << 28) -# define RADEON_LINE_PATTERN_AUTO_RESET (1 << 29) -#define RADEON_RE_LINE_STATE 0x1cd4 -# define RADEON_LINE_CURRENT_PTR_SHIFT 0 -# define RADEON_LINE_CURRENT_COUNT_SHIFT 8 -#define RADEON_RE_MISC 0x26c4 -# define RADEON_STIPPLE_COORD_MASK 0x1f -# define RADEON_STIPPLE_X_OFFSET_SHIFT 0 -# define RADEON_STIPPLE_X_OFFSET_MASK (0x1f << 0) -# define RADEON_STIPPLE_Y_OFFSET_SHIFT 8 -# define RADEON_STIPPLE_Y_OFFSET_MASK (0x1f << 8) -# define RADEON_STIPPLE_LITTLE_BIT_ORDER (0 << 16) -# define RADEON_STIPPLE_BIG_BIT_ORDER (1 << 16) -#define RADEON_RE_SOLID_COLOR 0x1c1c -#define RADEON_RE_TOP_LEFT 0x26c0 -# define RADEON_RE_LEFT_SHIFT 0 -# define RADEON_RE_TOP_SHIFT 16 -#define RADEON_RE_WIDTH_HEIGHT 0x1c44 -# define RADEON_RE_WIDTH_SHIFT 0 -# define RADEON_RE_HEIGHT_SHIFT 16 - -#define RADEON_SE_CNTL 0x1c4c -# define RADEON_FFACE_CULL_CW (0 << 0) -# define RADEON_FFACE_CULL_CCW (1 << 0) -# define RADEON_FFACE_CULL_DIR_MASK (1 << 0) -# define RADEON_BFACE_CULL (0 << 1) -# define RADEON_BFACE_SOLID (3 << 1) -# define RADEON_FFACE_CULL (0 << 3) -# define RADEON_FFACE_SOLID (3 << 3) -# define RADEON_FFACE_CULL_MASK (3 << 3) -# define RADEON_BADVTX_CULL_DISABLE (1 << 5) -# define RADEON_FLAT_SHADE_VTX_0 (0 << 6) -# define RADEON_FLAT_SHADE_VTX_1 (1 << 6) -# define RADEON_FLAT_SHADE_VTX_2 (2 << 6) -# define RADEON_FLAT_SHADE_VTX_LAST (3 << 6) -# define RADEON_DIFFUSE_SHADE_SOLID (0 << 8) -# define RADEON_DIFFUSE_SHADE_FLAT (1 << 8) -# define RADEON_DIFFUSE_SHADE_GOURAUD (2 << 8) -# define RADEON_DIFFUSE_SHADE_MASK (3 << 8) -# define RADEON_ALPHA_SHADE_SOLID (0 << 10) -# define RADEON_ALPHA_SHADE_FLAT (1 << 10) -# define RADEON_ALPHA_SHADE_GOURAUD (2 << 10) -# define RADEON_ALPHA_SHADE_MASK (3 << 10) -# define RADEON_SPECULAR_SHADE_SOLID (0 << 12) -# define RADEON_SPECULAR_SHADE_FLAT (1 << 12) -# define RADEON_SPECULAR_SHADE_GOURAUD (2 << 12) -# define RADEON_SPECULAR_SHADE_MASK (3 << 12) -# define RADEON_FOG_SHADE_SOLID (0 << 14) -# define RADEON_FOG_SHADE_FLAT (1 << 14) -# define RADEON_FOG_SHADE_GOURAUD (2 << 14) -# define RADEON_FOG_SHADE_MASK (3 << 14) -# define RADEON_ZBIAS_ENABLE_POINT (1 << 16) -# define RADEON_ZBIAS_ENABLE_LINE (1 << 17) -# define RADEON_ZBIAS_ENABLE_TRI (1 << 18) -# define RADEON_WIDELINE_ENABLE (1 << 20) -# define RADEON_VPORT_XY_XFORM_ENABLE (1 << 24) -# define RADEON_VPORT_Z_XFORM_ENABLE (1 << 25) -# define RADEON_VTX_PIX_CENTER_D3D (0 << 27) -# define RADEON_VTX_PIX_CENTER_OGL (1 << 27) -# define RADEON_ROUND_MODE_TRUNC (0 << 28) -# define RADEON_ROUND_MODE_ROUND (1 << 28) -# define RADEON_ROUND_MODE_ROUND_EVEN (2 << 28) -# define RADEON_ROUND_MODE_ROUND_ODD (3 << 28) -# define RADEON_ROUND_PREC_16TH_PIX (0 << 30) -# define RADEON_ROUND_PREC_8TH_PIX (1 << 30) -# define RADEON_ROUND_PREC_4TH_PIX (2 << 30) -# define RADEON_ROUND_PREC_HALF_PIX (3 << 30) -#define RADEON_SE_CNTL_STATUS 0x2140 -# define RADEON_VC_NO_SWAP (0 << 0) -# define RADEON_VC_16BIT_SWAP (1 << 0) -# define RADEON_VC_32BIT_SWAP (2 << 0) -# define RADEON_VC_HALF_DWORD_SWAP (3 << 0) -# define RADEON_TCL_BYPASS (1 << 8) -#define RADEON_SE_COORD_FMT 0x1c50 -# define RADEON_VTX_XY_PRE_MULT_1_OVER_W0 (1 << 0) -# define RADEON_VTX_Z_PRE_MULT_1_OVER_W0 (1 << 1) -# define RADEON_VTX_ST0_NONPARAMETRIC (1 << 8) -# define RADEON_VTX_ST1_NONPARAMETRIC (1 << 9) -# define RADEON_VTX_ST2_NONPARAMETRIC (1 << 10) -# define RADEON_VTX_ST3_NONPARAMETRIC (1 << 11) -# define RADEON_VTX_W0_NORMALIZE (1 << 12) -# define RADEON_VTX_W0_IS_NOT_1_OVER_W0 (1 << 16) -# define RADEON_VTX_ST0_PRE_MULT_1_OVER_W0 (1 << 17) -# define RADEON_VTX_ST1_PRE_MULT_1_OVER_W0 (1 << 19) -# define RADEON_VTX_ST2_PRE_MULT_1_OVER_W0 (1 << 21) -# define RADEON_VTX_ST3_PRE_MULT_1_OVER_W0 (1 << 23) -# define RADEON_TEX1_W_ROUTING_USE_W0 (0 << 26) -# define RADEON_TEX1_W_ROUTING_USE_Q1 (1 << 26) -#define RADEON_SE_LINE_WIDTH 0x1db8 -#define RADEON_SE_TCL_LIGHT_MODEL_CTL 0x226c -# define RADEON_LIGHTING_ENABLE (1 << 0) -# define RADEON_LIGHT_IN_MODELSPACE (1 << 1) -# define RADEON_LOCAL_VIEWER (1 << 2) -# define RADEON_NORMALIZE_NORMALS (1 << 3) -# define RADEON_RESCALE_NORMALS (1 << 4) -# define RADEON_SPECULAR_LIGHTS (1 << 5) -# define RADEON_DIFFUSE_SPECULAR_COMBINE (1 << 6) -# define RADEON_LIGHT_ALPHA (1 << 7) -# define RADEON_LOCAL_LIGHT_VEC_GL (1 << 8) -# define RADEON_LIGHT_NO_NORMAL_AMBIENT_ONLY (1 << 9) -# define RADEON_LM_SOURCE_STATE_PREMULT 0 -# define RADEON_LM_SOURCE_STATE_MULT 1 -# define RADEON_LM_SOURCE_VERTEX_DIFFUSE 2 -# define RADEON_LM_SOURCE_VERTEX_SPECULAR 3 -# define RADEON_EMISSIVE_SOURCE_SHIFT 16 -# define RADEON_AMBIENT_SOURCE_SHIFT 18 -# define RADEON_DIFFUSE_SOURCE_SHIFT 20 -# define RADEON_SPECULAR_SOURCE_SHIFT 22 -#define RADEON_SE_TCL_MATERIAL_AMBIENT_RED 0x2220 -#define RADEON_SE_TCL_MATERIAL_AMBIENT_GREEN 0x2224 -#define RADEON_SE_TCL_MATERIAL_AMBIENT_BLUE 0x2228 -#define RADEON_SE_TCL_MATERIAL_AMBIENT_ALPHA 0x222c -#define RADEON_SE_TCL_MATERIAL_DIFFUSE_RED 0x2230 -#define RADEON_SE_TCL_MATERIAL_DIFFUSE_GREEN 0x2234 -#define RADEON_SE_TCL_MATERIAL_DIFFUSE_BLUE 0x2238 -#define RADEON_SE_TCL_MATERIAL_DIFFUSE_ALPHA 0x223c -#define RADEON_SE_TCL_MATERIAL_EMMISSIVE_RED 0x2210 -#define RADEON_SE_TCL_MATERIAL_EMMISSIVE_GREEN 0x2214 -#define RADEON_SE_TCL_MATERIAL_EMMISSIVE_BLUE 0x2218 -#define RADEON_SE_TCL_MATERIAL_EMMISSIVE_ALPHA 0x221c -#define RADEON_SE_TCL_MATERIAL_SPECULAR_RED 0x2240 -#define RADEON_SE_TCL_MATERIAL_SPECULAR_GREEN 0x2244 -#define RADEON_SE_TCL_MATERIAL_SPECULAR_BLUE 0x2248 -#define RADEON_SE_TCL_MATERIAL_SPECULAR_ALPHA 0x224c -#define RADEON_SE_TCL_MATRIX_SELECT_0 0x225c -# define RADEON_MODELVIEW_0_SHIFT 0 -# define RADEON_MODELVIEW_1_SHIFT 4 -# define RADEON_MODELVIEW_2_SHIFT 8 -# define RADEON_MODELVIEW_3_SHIFT 12 -# define RADEON_IT_MODELVIEW_0_SHIFT 16 -# define RADEON_IT_MODELVIEW_1_SHIFT 20 -# define RADEON_IT_MODELVIEW_2_SHIFT 24 -# define RADEON_IT_MODELVIEW_3_SHIFT 28 -#define RADEON_SE_TCL_MATRIX_SELECT_1 0x2260 -# define RADEON_MODELPROJECT_0_SHIFT 0 -# define RADEON_MODELPROJECT_1_SHIFT 4 -# define RADEON_MODELPROJECT_2_SHIFT 8 -# define RADEON_MODELPROJECT_3_SHIFT 12 -# define RADEON_TEXMAT_0_SHIFT 16 -# define RADEON_TEXMAT_1_SHIFT 20 -# define RADEON_TEXMAT_2_SHIFT 24 -# define RADEON_TEXMAT_3_SHIFT 28 - - -#define RADEON_SE_TCL_OUTPUT_VTX_FMT 0x2254 -# define RADEON_TCL_VTX_W0 (1 << 0) -# define RADEON_TCL_VTX_FP_DIFFUSE (1 << 1) -# define RADEON_TCL_VTX_FP_ALPHA (1 << 2) -# define RADEON_TCL_VTX_PK_DIFFUSE (1 << 3) -# define RADEON_TCL_VTX_FP_SPEC (1 << 4) -# define RADEON_TCL_VTX_FP_FOG (1 << 5) -# define RADEON_TCL_VTX_PK_SPEC (1 << 6) -# define RADEON_TCL_VTX_ST0 (1 << 7) -# define RADEON_TCL_VTX_ST1 (1 << 8) -# define RADEON_TCL_VTX_Q1 (1 << 9) -# define RADEON_TCL_VTX_ST2 (1 << 10) -# define RADEON_TCL_VTX_Q2 (1 << 11) -# define RADEON_TCL_VTX_ST3 (1 << 12) -# define RADEON_TCL_VTX_Q3 (1 << 13) -# define RADEON_TCL_VTX_Q0 (1 << 14) -# define RADEON_TCL_VTX_WEIGHT_COUNT_SHIFT 15 -# define RADEON_TCL_VTX_NORM0 (1 << 18) -# define RADEON_TCL_VTX_XY1 (1 << 27) -# define RADEON_TCL_VTX_Z1 (1 << 28) -# define RADEON_TCL_VTX_W1 (1 << 29) -# define RADEON_TCL_VTX_NORM1 (1 << 30) -# define RADEON_TCL_VTX_Z0 (1 << 31) - -#define RADEON_SE_TCL_OUTPUT_VTX_SEL 0x2258 -# define RADEON_TCL_COMPUTE_XYZW (1 << 0) -# define RADEON_TCL_COMPUTE_DIFFUSE (1 << 1) -# define RADEON_TCL_COMPUTE_SPECULAR (1 << 2) -# define RADEON_TCL_FORCE_NAN_IF_COLOR_NAN (1 << 3) -# define RADEON_TCL_FORCE_INORDER_PROC (1 << 4) -# define RADEON_TCL_TEX_INPUT_TEX_0 0 -# define RADEON_TCL_TEX_INPUT_TEX_1 1 -# define RADEON_TCL_TEX_INPUT_TEX_2 2 -# define RADEON_TCL_TEX_INPUT_TEX_3 3 -# define RADEON_TCL_TEX_COMPUTED_TEX_0 8 -# define RADEON_TCL_TEX_COMPUTED_TEX_1 9 -# define RADEON_TCL_TEX_COMPUTED_TEX_2 10 -# define RADEON_TCL_TEX_COMPUTED_TEX_3 11 -# define RADEON_TCL_TEX_0_OUTPUT_SHIFT 16 -# define RADEON_TCL_TEX_1_OUTPUT_SHIFT 20 -# define RADEON_TCL_TEX_2_OUTPUT_SHIFT 24 -# define RADEON_TCL_TEX_3_OUTPUT_SHIFT 28 - -#define RADEON_SE_TCL_PER_LIGHT_CTL_0 0x2270 -# define RADEON_LIGHT_0_ENABLE (1 << 0) -# define RADEON_LIGHT_0_ENABLE_AMBIENT (1 << 1) -# define RADEON_LIGHT_0_ENABLE_SPECULAR (1 << 2) -# define RADEON_LIGHT_0_IS_LOCAL (1 << 3) -# define RADEON_LIGHT_0_IS_SPOT (1 << 4) -# define RADEON_LIGHT_0_DUAL_CONE (1 << 5) -# define RADEON_LIGHT_0_ENABLE_RANGE_ATTEN (1 << 6) -# define RADEON_LIGHT_0_CONSTANT_RANGE_ATTEN (1 << 7) -# define RADEON_LIGHT_0_SHIFT 0 -# define RADEON_LIGHT_1_ENABLE (1 << 16) -# define RADEON_LIGHT_1_ENABLE_AMBIENT (1 << 17) -# define RADEON_LIGHT_1_ENABLE_SPECULAR (1 << 18) -# define RADEON_LIGHT_1_IS_LOCAL (1 << 19) -# define RADEON_LIGHT_1_IS_SPOT (1 << 20) -# define RADEON_LIGHT_1_DUAL_CONE (1 << 21) -# define RADEON_LIGHT_1_ENABLE_RANGE_ATTEN (1 << 22) -# define RADEON_LIGHT_1_CONSTANT_RANGE_ATTEN (1 << 23) -# define RADEON_LIGHT_1_SHIFT 16 -#define RADEON_SE_TCL_PER_LIGHT_CTL_1 0x2274 -# define RADEON_LIGHT_2_SHIFT 0 -# define RADEON_LIGHT_3_SHIFT 16 -#define RADEON_SE_TCL_PER_LIGHT_CTL_2 0x2278 -# define RADEON_LIGHT_4_SHIFT 0 -# define RADEON_LIGHT_5_SHIFT 16 -#define RADEON_SE_TCL_PER_LIGHT_CTL_3 0x227c -# define RADEON_LIGHT_6_SHIFT 0 -# define RADEON_LIGHT_7_SHIFT 16 - -#define RADEON_SE_TCL_SHININESS 0x2250 - -#define RADEON_SE_TCL_TEXTURE_PROC_CTL 0x2268 -# define RADEON_TEXGEN_TEXMAT_0_ENABLE (1 << 0) -# define RADEON_TEXGEN_TEXMAT_1_ENABLE (1 << 1) -# define RADEON_TEXGEN_TEXMAT_2_ENABLE (1 << 2) -# define RADEON_TEXGEN_TEXMAT_3_ENABLE (1 << 3) -# define RADEON_TEXMAT_0_ENABLE (1 << 4) -# define RADEON_TEXMAT_1_ENABLE (1 << 5) -# define RADEON_TEXMAT_2_ENABLE (1 << 6) -# define RADEON_TEXMAT_3_ENABLE (1 << 7) -# define RADEON_TEXGEN_INPUT_MASK 0xf -# define RADEON_TEXGEN_INPUT_TEXCOORD_0 0 -# define RADEON_TEXGEN_INPUT_TEXCOORD_1 1 -# define RADEON_TEXGEN_INPUT_TEXCOORD_2 2 -# define RADEON_TEXGEN_INPUT_TEXCOORD_3 3 -# define RADEON_TEXGEN_INPUT_OBJ 4 -# define RADEON_TEXGEN_INPUT_EYE 5 -# define RADEON_TEXGEN_INPUT_EYE_NORMAL 6 -# define RADEON_TEXGEN_INPUT_EYE_REFLECT 7 -# define RADEON_TEXGEN_INPUT_EYE_NORMALIZED 8 -# define RADEON_TEXGEN_0_INPUT_SHIFT 16 -# define RADEON_TEXGEN_1_INPUT_SHIFT 20 -# define RADEON_TEXGEN_2_INPUT_SHIFT 24 -# define RADEON_TEXGEN_3_INPUT_SHIFT 28 - -#define RADEON_SE_TCL_UCP_VERT_BLEND_CTL 0x2264 -# define RADEON_UCP_IN_CLIP_SPACE (1 << 0) -# define RADEON_UCP_IN_MODEL_SPACE (1 << 1) -# define RADEON_UCP_ENABLE_0 (1 << 2) -# define RADEON_UCP_ENABLE_1 (1 << 3) -# define RADEON_UCP_ENABLE_2 (1 << 4) -# define RADEON_UCP_ENABLE_3 (1 << 5) -# define RADEON_UCP_ENABLE_4 (1 << 6) -# define RADEON_UCP_ENABLE_5 (1 << 7) -# define RADEON_TCL_FOG_MASK (3 << 8) -# define RADEON_TCL_FOG_DISABLE (0 << 8) -# define RADEON_TCL_FOG_EXP (1 << 8) -# define RADEON_TCL_FOG_EXP2 (2 << 8) -# define RADEON_TCL_FOG_LINEAR (3 << 8) -# define RADEON_RNG_BASED_FOG (1 << 10) -# define RADEON_LIGHT_TWOSIDE (1 << 11) -# define RADEON_BLEND_OP_COUNT_MASK (7 << 12) -# define RADEON_BLEND_OP_COUNT_SHIFT 12 -# define RADEON_POSITION_BLEND_OP_ENABLE (1 << 16) -# define RADEON_NORMAL_BLEND_OP_ENABLE (1 << 17) -# define RADEON_VERTEX_BLEND_SRC_0_PRIMARY (1 << 18) -# define RADEON_VERTEX_BLEND_SRC_0_SECONDARY (1 << 18) -# define RADEON_VERTEX_BLEND_SRC_1_PRIMARY (1 << 19) -# define RADEON_VERTEX_BLEND_SRC_1_SECONDARY (1 << 19) -# define RADEON_VERTEX_BLEND_SRC_2_PRIMARY (1 << 20) -# define RADEON_VERTEX_BLEND_SRC_2_SECONDARY (1 << 20) -# define RADEON_VERTEX_BLEND_SRC_3_PRIMARY (1 << 21) -# define RADEON_VERTEX_BLEND_SRC_3_SECONDARY (1 << 21) -# define RADEON_VERTEX_BLEND_WGT_MINUS_ONE (1 << 22) -# define RADEON_CULL_FRONT_IS_CW (0 << 28) -# define RADEON_CULL_FRONT_IS_CCW (1 << 28) -# define RADEON_CULL_FRONT (1 << 29) -# define RADEON_CULL_BACK (1 << 30) -# define RADEON_FORCE_W_TO_ONE (1 << 31) - -#define RADEON_SE_VPORT_XSCALE 0x1d98 -#define RADEON_SE_VPORT_XOFFSET 0x1d9c -#define RADEON_SE_VPORT_YSCALE 0x1da0 -#define RADEON_SE_VPORT_YOFFSET 0x1da4 -#define RADEON_SE_VPORT_ZSCALE 0x1da8 -#define RADEON_SE_VPORT_ZOFFSET 0x1dac -#define RADEON_SE_ZBIAS_FACTOR 0x1db0 -#define RADEON_SE_ZBIAS_CONSTANT 0x1db4 - - - - /* Registers for CP and Microcode Engine */ -#define RADEON_CP_ME_RAM_ADDR 0x07d4 -#define RADEON_CP_ME_RAM_RADDR 0x07d8 -#define RADEON_CP_ME_RAM_DATAH 0x07dc -#define RADEON_CP_ME_RAM_DATAL 0x07e0 - -#define RADEON_CP_RB_BASE 0x0700 -#define RADEON_CP_RB_CNTL 0x0704 -#define RADEON_CP_RB_RPTR_ADDR 0x070c -#define RADEON_CP_RB_RPTR 0x0710 -#define RADEON_CP_RB_WPTR 0x0714 - -#define RADEON_CP_IB_BASE 0x0738 -#define RADEON_CP_IB_BUFSZ 0x073c - -#define RADEON_CP_CSQ_CNTL 0x0740 -# define RADEON_CSQ_CNT_PRIMARY_MASK (0xff << 0) -# define RADEON_CSQ_PRIDIS_INDDIS (0 << 28) -# define RADEON_CSQ_PRIPIO_INDDIS (1 << 28) -# define RADEON_CSQ_PRIBM_INDDIS (2 << 28) -# define RADEON_CSQ_PRIPIO_INDBM (3 << 28) -# define RADEON_CSQ_PRIBM_INDBM (4 << 28) -# define RADEON_CSQ_PRIPIO_INDPIO (15 << 28) -#define RADEON_CP_CSQ_STAT 0x07f8 -# define RADEON_CSQ_RPTR_PRIMARY_MASK (0xff << 0) -# define RADEON_CSQ_WPTR_PRIMARY_MASK (0xff << 8) -# define RADEON_CSQ_RPTR_INDIRECT_MASK (0xff << 16) -# define RADEON_CSQ_WPTR_INDIRECT_MASK (0xff << 24) -#define RADEON_CP_CSQ_ADDR 0x07f0 -#define RADEON_CP_CSQ_DATA 0x07f4 -#define RADEON_CP_CSQ_APER_PRIMARY 0x1000 -#define RADEON_CP_CSQ_APER_INDIRECT 0x1300 - -#define RADEON_CP_RB_WPTR_DELAY 0x0718 -# define RADEON_PRE_WRITE_TIMER_SHIFT 0 -# define RADEON_PRE_WRITE_LIMIT_SHIFT 23 - -#define RADEON_AIC_CNTL 0x01d0 -# define RADEON_PCIGART_TRANSLATE_EN (1 << 0) -#define RADEON_AIC_LO_ADDR 0x01dc - - - - /* Constants */ -#define RADEON_LAST_FRAME_REG RADEON_GUI_SCRATCH_REG0 -#define RADEON_LAST_CLEAR_REG RADEON_GUI_SCRATCH_REG2 - - - - /* CP packet types */ -#define RADEON_CP_PACKET0 0x00000000 -#define RADEON_CP_PACKET1 0x40000000 -#define RADEON_CP_PACKET2 0x80000000 -#define RADEON_CP_PACKET3 0xC0000000 -# define RADEON_CP_PACKET_MASK 0xC0000000 -# define RADEON_CP_PACKET_COUNT_MASK 0x3fff0000 -# define RADEON_CP_PACKET_MAX_DWORDS (1 << 12) -# define RADEON_CP_PACKET0_REG_MASK 0x000007ff -# define RADEON_CP_PACKET1_REG0_MASK 0x000007ff -# define RADEON_CP_PACKET1_REG1_MASK 0x003ff800 - -#define RADEON_CP_PACKET0_ONE_REG_WR 0x00008000 - -#define RADEON_CP_PACKET3_NOP 0xC0001000 -#define RADEON_CP_PACKET3_NEXT_CHAR 0xC0001900 -#define RADEON_CP_PACKET3_PLY_NEXTSCAN 0xC0001D00 -#define RADEON_CP_PACKET3_SET_SCISSORS 0xC0001E00 -#define RADEON_CP_PACKET3_3D_RNDR_GEN_INDX_PRIM 0xC0002300 -#define RADEON_CP_PACKET3_LOAD_MICROCODE 0xC0002400 -#define RADEON_CP_PACKET3_WAIT_FOR_IDLE 0xC0002600 -#define RADEON_CP_PACKET3_3D_DRAW_VBUF 0xC0002800 -#define RADEON_CP_PACKET3_3D_DRAW_IMMD 0xC0002900 -#define RADEON_CP_PACKET3_3D_DRAW_INDX 0xC0002A00 -#define RADEON_CP_PACKET3_LOAD_PALETTE 0xC0002C00 -#define RADEON_CP_PACKET3_3D_LOAD_VBPNTR 0xC0002F00 -#define RADEON_CP_PACKET3_CNTL_PAINT 0xC0009100 -#define RADEON_CP_PACKET3_CNTL_BITBLT 0xC0009200 -#define RADEON_CP_PACKET3_CNTL_SMALLTEXT 0xC0009300 -#define RADEON_CP_PACKET3_CNTL_HOSTDATA_BLT 0xC0009400 -#define RADEON_CP_PACKET3_CNTL_POLYLINE 0xC0009500 -#define RADEON_CP_PACKET3_CNTL_POLYSCANLINES 0xC0009800 -#define RADEON_CP_PACKET3_CNTL_PAINT_MULTI 0xC0009A00 -#define RADEON_CP_PACKET3_CNTL_BITBLT_MULTI 0xC0009B00 -#define RADEON_CP_PACKET3_CNTL_TRANS_BITBLT 0xC0009C00 - - -#define RADEON_CP_VC_FRMT_XY 0x00000000 -#define RADEON_CP_VC_FRMT_W0 0x00000001 -#define RADEON_CP_VC_FRMT_FPCOLOR 0x00000002 -#define RADEON_CP_VC_FRMT_FPALPHA 0x00000004 -#define RADEON_CP_VC_FRMT_PKCOLOR 0x00000008 -#define RADEON_CP_VC_FRMT_FPSPEC 0x00000010 -#define RADEON_CP_VC_FRMT_FPFOG 0x00000020 -#define RADEON_CP_VC_FRMT_PKSPEC 0x00000040 -#define RADEON_CP_VC_FRMT_ST0 0x00000080 -#define RADEON_CP_VC_FRMT_ST1 0x00000100 -#define RADEON_CP_VC_FRMT_Q1 0x00000200 -#define RADEON_CP_VC_FRMT_ST2 0x00000400 -#define RADEON_CP_VC_FRMT_Q2 0x00000800 -#define RADEON_CP_VC_FRMT_ST3 0x00001000 -#define RADEON_CP_VC_FRMT_Q3 0x00002000 -#define RADEON_CP_VC_FRMT_Q0 0x00004000 -#define RADEON_CP_VC_FRMT_BLND_WEIGHT_CNT_MASK 0x00038000 -#define RADEON_CP_VC_FRMT_N0 0x00040000 -#define RADEON_CP_VC_FRMT_XY1 0x08000000 -#define RADEON_CP_VC_FRMT_Z1 0x10000000 -#define RADEON_CP_VC_FRMT_W1 0x20000000 -#define RADEON_CP_VC_FRMT_N1 0x40000000 -#define RADEON_CP_VC_FRMT_Z 0x80000000 - -#define RADEON_CP_VC_CNTL_PRIM_TYPE_NONE 0x00000000 -#define RADEON_CP_VC_CNTL_PRIM_TYPE_POINT 0x00000001 -#define RADEON_CP_VC_CNTL_PRIM_TYPE_LINE 0x00000002 -#define RADEON_CP_VC_CNTL_PRIM_TYPE_LINE_STRIP 0x00000003 -#define RADEON_CP_VC_CNTL_PRIM_TYPE_TRI_LIST 0x00000004 -#define RADEON_CP_VC_CNTL_PRIM_TYPE_TRI_FAN 0x00000005 -#define RADEON_CP_VC_CNTL_PRIM_TYPE_TRI_STRIP 0x00000006 -#define RADEON_CP_VC_CNTL_PRIM_TYPE_TRI_TYPE_2 0x00000007 -#define RADEON_CP_VC_CNTL_PRIM_TYPE_RECT_LIST 0x00000008 -#define RADEON_CP_VC_CNTL_PRIM_TYPE_3VRT_POINT_LIST 0x00000009 -#define RADEON_CP_VC_CNTL_PRIM_TYPE_3VRT_LINE_LIST 0x0000000a -#define RADEON_CP_VC_CNTL_PRIM_WALK_IND 0x00000010 -#define RADEON_CP_VC_CNTL_PRIM_WALK_LIST 0x00000020 -#define RADEON_CP_VC_CNTL_PRIM_WALK_RING 0x00000030 -#define RADEON_CP_VC_CNTL_COLOR_ORDER_BGRA 0x00000000 -#define RADEON_CP_VC_CNTL_COLOR_ORDER_RGBA 0x00000040 -#define RADEON_CP_VC_CNTL_MAOS_ENABLE 0x00000080 -#define RADEON_CP_VC_CNTL_VTX_FMT_NON_RADEON_MODE 0x00000000 -#define RADEON_CP_VC_CNTL_VTX_FMT_RADEON_MODE 0x00000100 -#define RADEON_CP_VC_CNTL_TCL_DISABLE 0x00000000 -#define RADEON_CP_VC_CNTL_TCL_ENABLE 0x00000200 -#define RADEON_CP_VC_CNTL_NUM_SHIFT 16 - -#define RADEON_VS_MATRIX_0_ADDR 0 -#define RADEON_VS_MATRIX_1_ADDR 4 -#define RADEON_VS_MATRIX_2_ADDR 8 -#define RADEON_VS_MATRIX_3_ADDR 12 -#define RADEON_VS_MATRIX_4_ADDR 16 -#define RADEON_VS_MATRIX_5_ADDR 20 -#define RADEON_VS_MATRIX_6_ADDR 24 -#define RADEON_VS_MATRIX_7_ADDR 28 -#define RADEON_VS_MATRIX_8_ADDR 32 -#define RADEON_VS_MATRIX_9_ADDR 36 -#define RADEON_VS_MATRIX_10_ADDR 40 -#define RADEON_VS_MATRIX_11_ADDR 44 -#define RADEON_VS_MATRIX_12_ADDR 48 -#define RADEON_VS_MATRIX_13_ADDR 52 -#define RADEON_VS_MATRIX_14_ADDR 56 -#define RADEON_VS_MATRIX_15_ADDR 60 -#define RADEON_VS_LIGHT_AMBIENT_ADDR 64 -#define RADEON_VS_LIGHT_DIFFUSE_ADDR 72 -#define RADEON_VS_LIGHT_SPECULAR_ADDR 80 -#define RADEON_VS_LIGHT_DIRPOS_ADDR 88 -#define RADEON_VS_LIGHT_HWVSPOT_ADDR 96 -#define RADEON_VS_LIGHT_ATTENUATION_ADDR 104 -#define RADEON_VS_MATRIX_EYE2CLIP_ADDR 112 -#define RADEON_VS_UCP_ADDR 116 -#define RADEON_VS_GLOBAL_AMBIENT_ADDR 122 -#define RADEON_VS_FOG_PARAM_ADDR 123 -#define RADEON_VS_EYE_VECTOR_ADDR 124 - -#define RADEON_SS_LIGHT_DCD_ADDR 0 -#define RADEON_SS_LIGHT_SPOT_EXPONENT_ADDR 8 -#define RADEON_SS_LIGHT_SPOT_CUTOFF_ADDR 16 -#define RADEON_SS_LIGHT_SPECULAR_THRESH_ADDR 24 -#define RADEON_SS_LIGHT_RANGE_CUTOFF_ADDR 32 -#define RADEON_SS_VERT_GUARD_CLIP_ADJ_ADDR 48 -#define RADEON_SS_VERT_GUARD_DISCARD_ADJ_ADDR 49 -#define RADEON_SS_HORZ_GUARD_CLIP_ADJ_ADDR 50 -#define RADEON_SS_HORZ_GUARD_DISCARD_ADJ_ADDR 51 -#define RADEON_SS_SHININESS 60 - -#define RADEON_TV_MASTER_CNTL 0x0800 -# define RADEON_TVCLK_ALWAYS_ONb (1 << 30) -#define RADEON_TV_DAC_CNTL 0x088c -# define RADEON_TV_DAC_CMPOUT (1 << 5) -#define RADEON_TV_PRE_DAC_MUX_CNTL 0x0888 -# define RADEON_Y_RED_EN (1 << 0) -# define RADEON_C_GRN_EN (1 << 1) -# define RADEON_CMP_BLU_EN (1 << 2) -# define RADEON_RED_MX_FORCE_DAC_DATA (6 << 4) -# define RADEON_GRN_MX_FORCE_DAC_DATA (6 << 8) -# define RADEON_BLU_MX_FORCE_DAC_DATA (6 << 12) -# define RADEON_TV_FORCE_DAC_DATA_SHIFT 16 -#endif diff --git a/src/radeon_sarea.h b/src/radeon_sarea.h deleted file mode 100644 index 556fca6f..00000000 --- a/src/radeon_sarea.h +++ /dev/null @@ -1,231 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_sarea.h,v 1.5 2002/10/30 12:52:14 alanh Exp $ */ -/* - * Copyright 2000 ATI Technologies Inc., Markham, Ontario, - * VA Linux Systems Inc., Fremont, California. - * - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining - * a copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation on the rights to use, copy, modify, merge, - * publish, distribute, sublicense, and/or sell copies of the Software, - * and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial - * portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR - * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* - * Authors: - * Kevin E. Martin <martin@xfree86.org> - * Gareth Hughes <gareth@valinux.com> - * - */ - -#ifndef _RADEON_SAREA_H_ -#define _RADEON_SAREA_H_ - -/* WARNING: If you change any of these defines, make sure to change the - * defines in the kernel file (radeon_drm.h) - */ -#ifndef __RADEON_SAREA_DEFINES__ -#define __RADEON_SAREA_DEFINES__ - -/* What needs to be changed for the current vertex buffer? */ -#define RADEON_UPLOAD_CONTEXT 0x00000001 -#define RADEON_UPLOAD_VERTFMT 0x00000002 -#define RADEON_UPLOAD_LINE 0x00000004 -#define RADEON_UPLOAD_BUMPMAP 0x00000008 -#define RADEON_UPLOAD_MASKS 0x00000010 -#define RADEON_UPLOAD_VIEWPORT 0x00000020 -#define RADEON_UPLOAD_SETUP 0x00000040 -#define RADEON_UPLOAD_TCL 0x00000080 -#define RADEON_UPLOAD_MISC 0x00000100 -#define RADEON_UPLOAD_TEX0 0x00000200 -#define RADEON_UPLOAD_TEX1 0x00000400 -#define RADEON_UPLOAD_TEX2 0x00000800 -#define RADEON_UPLOAD_TEX0IMAGES 0x00001000 -#define RADEON_UPLOAD_TEX1IMAGES 0x00002000 -#define RADEON_UPLOAD_TEX2IMAGES 0x00004000 -#define RADEON_UPLOAD_CLIPRECTS 0x00008000 /* handled client-side */ -#define RADEON_REQUIRE_QUIESCENCE 0x00010000 -#define RADEON_UPLOAD_ZBIAS 0x00020000 -#define RADEON_UPLOAD_ALL 0x0002ffff -#define RADEON_UPLOAD_CONTEXT_ALL 0x000201ff - -#define RADEON_FRONT 0x1 -#define RADEON_BACK 0x2 -#define RADEON_DEPTH 0x4 -#define RADEON_STENCIL 0x8 - -/* Primitive types */ -#define RADEON_POINTS 0x1 -#define RADEON_LINES 0x2 -#define RADEON_LINE_STRIP 0x3 -#define RADEON_TRIANGLES 0x4 -#define RADEON_TRIANGLE_FAN 0x5 -#define RADEON_TRIANGLE_STRIP 0x6 -#define RADEON_3VTX_POINTS 0x9 -#define RADEON_3VTX_LINES 0xa - -/* Vertex/indirect buffer size */ -#define RADEON_BUFFER_SIZE 65536 - -/* Byte offsets for indirect buffer data */ -#define RADEON_INDEX_PRIM_OFFSET 20 -#define RADEON_HOSTDATA_BLIT_OFFSET 32 - -#define RADEON_SCRATCH_REG_OFFSET 32 - -/* Keep these small for testing */ -#define RADEON_NR_SAREA_CLIPRECTS 12 - -/* There are 2 heaps (local/GART). Each region within a heap is a - * minimum of 64k, and there are at most 64 of them per heap. - */ -#define RADEON_CARD_HEAP 0 -#define RADEON_GART_HEAP 1 -#define RADEON_NR_TEX_HEAPS 2 -#define RADEON_NR_TEX_REGIONS 64 -#define RADEON_LOG_TEX_GRANULARITY 16 - -#define RADEON_MAX_TEXTURE_LEVELS 12 -#define RADEON_MAX_TEXTURE_UNITS 3 - -/* Blits have strict offset rules. All blit offset must be aligned on - * a 1K-byte boundary. - */ -#define RADEON_OFFSET_SHIFT 10 -#define RADEON_OFFSET_ALIGN (1 << RADEON_OFFSET_SHIFT) -#define RADEON_OFFSET_MASK (RADEON_OFFSET_ALIGN - 1) - -#endif /* __RADEON_SAREA_DEFINES__ */ - -typedef struct { - unsigned int red; - unsigned int green; - unsigned int blue; - unsigned int alpha; -} radeon_color_regs_t; - -typedef struct { - /* Context state */ - unsigned int pp_misc; - unsigned int pp_fog_color; - unsigned int re_solid_color; - unsigned int rb3d_blendcntl; - unsigned int rb3d_depthoffset; - unsigned int rb3d_depthpitch; - unsigned int rb3d_zstencilcntl; - - unsigned int pp_cntl; - unsigned int rb3d_cntl; - unsigned int rb3d_coloroffset; - unsigned int re_width_height; - unsigned int rb3d_colorpitch; - unsigned int se_cntl; - - /* Vertex format state */ - unsigned int se_coord_fmt; - - /* Line state */ - unsigned int re_line_pattern; - unsigned int re_line_state; - - unsigned int se_line_width; - - /* Bumpmap state */ - unsigned int pp_lum_matrix; - - unsigned int pp_rot_matrix_0; - unsigned int pp_rot_matrix_1; - - /* Mask state */ - unsigned int rb3d_stencilrefmask; - unsigned int rb3d_ropcntl; - unsigned int rb3d_planemask; - - /* Viewport state */ - unsigned int se_vport_xscale; - unsigned int se_vport_xoffset; - unsigned int se_vport_yscale; - unsigned int se_vport_yoffset; - unsigned int se_vport_zscale; - unsigned int se_vport_zoffset; - - /* Setup state */ - unsigned int se_cntl_status; - - /* Misc state */ - unsigned int re_top_left; - unsigned int re_misc; -} radeon_context_regs_t; - -/* Setup registers for each texture unit */ -typedef struct { - unsigned int pp_txfilter; - unsigned int pp_txformat; - unsigned int pp_txoffset; - unsigned int pp_txcblend; - unsigned int pp_txablend; - unsigned int pp_tfactor; - unsigned int pp_border_color; -} radeon_texture_regs_t; - -typedef struct { - /* The channel for communication of state information to the kernel - * on firing a vertex buffer. - */ - radeon_context_regs_t ContextState; - radeon_texture_regs_t TexState[RADEON_MAX_TEXTURE_UNITS]; - unsigned int dirty; - unsigned int vertsize; - unsigned int vc_format; - - /* The current cliprects, or a subset thereof */ - drm_clip_rect_t boxes[RADEON_NR_SAREA_CLIPRECTS]; - unsigned int nbox; - - /* Counters for throttling of rendering clients */ - unsigned int last_frame; - unsigned int last_dispatch; - unsigned int last_clear; - - /* Maintain an LRU of contiguous regions of texture space. If you - * think you own a region of texture memory, and it has an age - * different to the one you set, then you are mistaken and it has - * been stolen by another client. If global texAge hasn't changed, - * there is no need to walk the list. - * - * These regions can be used as a proxy for the fine-grained texture - * information of other clients - by maintaining them in the same - * lru which is used to age their own textures, clients have an - * approximate lru for the whole of global texture space, and can - * make informed decisions as to which areas to kick out. There is - * no need to choose whether to kick out your own texture or someone - * else's - simply eject them all in LRU order. - */ - /* Last elt is sentinal */ - drmTextureRegion texList[RADEON_NR_TEX_HEAPS][RADEON_NR_TEX_REGIONS+1]; - /* last time texture was uploaded */ - unsigned int texAge[RADEON_NR_TEX_HEAPS]; - - int ctxOwner; /* last context to upload state */ - int pfAllowPageFlip; /* set by the 2d driver, read by the client */ - int pfCurrentPage; /* set by kernel, read by others */ - int crtc2_base; /* for pageflipping with CloneMode */ -} RADEONSAREAPriv, *RADEONSAREAPrivPtr; - -#endif diff --git a/src/radeon_version.h b/src/radeon_version.h deleted file mode 100644 index 264724df..00000000 --- a/src/radeon_version.h +++ /dev/null @@ -1,62 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_version.h,v 1.9 2003/04/06 20:07:34 martin Exp $ */ -/* - * Copyright 2000 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _RADEON_VERSION_H_ -#define _RADEON_VERSION_H_ 1 - -#undef RADEON_NAME -#undef RADEON_DRIVER_NAME -#undef R200_DRIVER_NAME -#undef RADEON_VERSION_MAJOR -#undef RADEON_VERSION_MINOR -#undef RADEON_VERSION_PATCH -#undef RADEON_VERSION_CURRENT -#undef RADEON_VERSION_EVALUATE -#undef RADEON_VERSION_STRINGIFY -#undef RADEON_VERSION_NAME - -#define RADEON_NAME "RADEON" -#define RADEON_DRIVER_NAME "radeon" -#define R200_DRIVER_NAME "r200" - -#define RADEON_VERSION_MAJOR 4 -#define RADEON_VERSION_MINOR 0 -#define RADEON_VERSION_PATCH 1 - -#ifndef RADEON_VERSION_EXTRA -#define RADEON_VERSION_EXTRA "" -#endif - -#define RADEON_VERSION_CURRENT \ - ((RADEON_VERSION_MAJOR << 20) | \ - (RADEON_VERSION_MINOR << 10) | \ - (RADEON_VERSION_PATCH)) - -#define RADEON_VERSION_EVALUATE(__x) #__x -#define RADEON_VERSION_STRINGIFY(_x) RADEON_VERSION_EVALUATE(_x) -#define RADEON_VERSION_NAME \ - RADEON_VERSION_STRINGIFY(RADEON_VERSION_MAJOR) "." \ - RADEON_VERSION_STRINGIFY(RADEON_VERSION_MINOR) "." \ - RADEON_VERSION_STRINGIFY(RADEON_VERSION_PATCH) RADEON_VERSION_EXTRA - -#endif /* _RADEON_VERSION_H_ */ diff --git a/src/radeon_video.c b/src/radeon_video.c deleted file mode 100644 index 3f47e499..00000000 --- a/src/radeon_video.c +++ /dev/null @@ -1,1551 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.c,v 1.28 2003/07/02 17:31:30 martin Exp $ */ - -#include "radeon.h" -#include "radeon_macros.h" -#include "radeon_probe.h" -#include "radeon_reg.h" -#include "radeon_mergedfb.h" - -#include "xf86.h" -#include "dixstruct.h" - -#include "Xv.h" -#include "fourcc.h" - -#define OFF_DELAY 250 /* milliseconds */ -#define FREE_DELAY 15000 - -#define OFF_TIMER 0x01 -#define FREE_TIMER 0x02 -#define CLIENT_VIDEO_ON 0x04 - -#define TIMER_MASK (OFF_TIMER | FREE_TIMER) - -extern int gRADEONEntityIndex; - -static void RADEONInitOffscreenImages(ScreenPtr); - -static XF86VideoAdaptorPtr RADEONSetupImageVideo(ScreenPtr); -static int RADEONSetPortAttribute(ScrnInfoPtr, Atom, INT32, pointer); -static int RADEONGetPortAttribute(ScrnInfoPtr, Atom ,INT32 *, pointer); -static void RADEONStopVideo(ScrnInfoPtr, pointer, Bool); -static void RADEONQueryBestSize(ScrnInfoPtr, Bool, short, short, short, short, - unsigned int *, unsigned int *, pointer); -static int RADEONPutImage(ScrnInfoPtr, short, short, short, short, short, - short, short, short, int, unsigned char*, short, - short, Bool, RegionPtr, pointer); -static int RADEONQueryImageAttributes(ScrnInfoPtr, int, unsigned short *, - unsigned short *, int *, int *); - -static void RADEONVideoTimerCallback(ScrnInfoPtr pScrn, Time now); - - -#define MAKE_ATOM(a) MakeAtom(a, sizeof(a) - 1, TRUE) - -static Atom xvBrightness, xvColorKey, xvSaturation, xvDoubleBuffer; -static Atom xvRedIntensity, xvGreenIntensity, xvBlueIntensity; -static Atom xvContrast, xvHue, xvColor, xvAutopaintColorkey, xvSetDefaults; -static Atom xvSwitchCRT; - -typedef struct { - CARD32 transform_index; - int brightness; - int saturation; - int hue; - int contrast; - int red_intensity; - int green_intensity; - int blue_intensity; - int ecp_div; - - Bool doubleBuffer; - unsigned char currentBuffer; - RegionRec clip; - CARD32 colorKey; - CARD32 videoStatus; - Time offTime; - Time freeTime; - Bool autopaint_colorkey; - Bool crt2; /* 0=CRT1, 1=CRT2 */ -} RADEONPortPrivRec, *RADEONPortPrivPtr; - - -#define GET_PORT_PRIVATE(pScrn) \ - (RADEONPortPrivPtr)((RADEONPTR(pScrn))->adaptor->pPortPrivates[0].ptr) - - -void RADEONInitVideo(ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - XF86VideoAdaptorPtr *adaptors, *newAdaptors = NULL; - XF86VideoAdaptorPtr newAdaptor = NULL; - int num_adaptors; - - newAdaptor = RADEONSetupImageVideo(pScreen); - RADEONInitOffscreenImages(pScreen); - num_adaptors = xf86XVListGenericAdaptors(pScrn, &adaptors); - - if(newAdaptor) { - if(!num_adaptors) { - num_adaptors = 1; - adaptors = &newAdaptor; - } else { - newAdaptors = /* need to free this someplace */ - xalloc((num_adaptors + 1) * sizeof(XF86VideoAdaptorPtr*)); - if(newAdaptors) { - memcpy(newAdaptors, adaptors, num_adaptors * - sizeof(XF86VideoAdaptorPtr)); - newAdaptors[num_adaptors] = newAdaptor; - adaptors = newAdaptors; - num_adaptors++; - } - } - } - - if(num_adaptors) - xf86XVScreenInit(pScreen, adaptors, num_adaptors); - - if(newAdaptors) - xfree(newAdaptors); -} - -/* client libraries expect an encoding */ -static XF86VideoEncodingRec DummyEncoding = -{ - 0, - "XV_IMAGE", - 2048, 2048, - {1, 1} -}; - -#define NUM_FORMATS 12 - -static XF86VideoFormatRec Formats[NUM_FORMATS] = -{ - {8, TrueColor}, {8, DirectColor}, {8, PseudoColor}, - {8, GrayScale}, {8, StaticGray}, {8, StaticColor}, - {15, TrueColor}, {16, TrueColor}, {24, TrueColor}, - {15, DirectColor}, {16, DirectColor}, {24, DirectColor} -}; - - -#define NUM_ATTRIBUTES 9+4 - -static XF86AttributeRec Attributes[NUM_ATTRIBUTES] = -{ - {XvSettable , 0, 1, "XV_SET_DEFAULTS"}, - {XvSettable | XvGettable, 0, 1, "XV_AUTOPAINT_COLORKEY"}, - {XvSettable | XvGettable, 0, ~0, "XV_COLORKEY"}, - {XvSettable | XvGettable, 0, 1, "XV_DOUBLE_BUFFER"}, - {XvSettable | XvGettable, -1000, 1000, "XV_BRIGHTNESS"}, - {XvSettable | XvGettable, -1000, 1000, "XV_CONTRAST"}, - {XvSettable | XvGettable, -1000, 1000, "XV_SATURATION"}, - {XvSettable | XvGettable, -1000, 1000, "XV_COLOR"}, - {XvSettable | XvGettable, -1000, 1000, "XV_HUE"}, - {XvSettable | XvGettable, -1000, 1000, "XV_RED_INTENSITY"}, - {XvSettable | XvGettable, -1000, 1000, "XV_GREEN_INTENSITY"}, - {XvSettable | XvGettable, -1000, 1000, "XV_BLUE_INTENSITY"}, - {XvSettable | XvGettable, 0, 1, "XV_SWITCHCRT"}, -}; - -#define NUM_IMAGES 4 - -static XF86ImageRec Images[NUM_IMAGES] = -{ - XVIMAGE_YUY2, - XVIMAGE_UYVY, - XVIMAGE_YV12, - XVIMAGE_I420 -}; - -/* Reference color space transform data */ -typedef struct tagREF_TRANSFORM -{ - float RefLuma; - float RefRCb; - float RefRCr; - float RefGCb; - float RefGCr; - float RefBCb; - float RefBCr; -} REF_TRANSFORM; - -/* Parameters for ITU-R BT.601 and ITU-R BT.709 colour spaces */ -REF_TRANSFORM trans[2] = -{ - {1.1678, 0.0, 1.6007, -0.3929, -0.8154, 2.0232, 0.0}, /* BT.601 */ - {1.1678, 0.0, 1.7980, -0.2139, -0.5345, 2.1186, 0.0} /* BT.709 */ -}; - - -/* Gamma curve definition */ -typedef struct -{ - unsigned int gammaReg; - unsigned int gammaSlope; - unsigned int gammaOffset; -} GAMMA_SETTINGS; - -/* Recommended gamma curve parameters */ -GAMMA_SETTINGS def_gamma[18] = -{ - {RADEON_OV0_GAMMA_000_00F, 0x100, 0x0000}, - {RADEON_OV0_GAMMA_010_01F, 0x100, 0x0020}, - {RADEON_OV0_GAMMA_020_03F, 0x100, 0x0040}, - {RADEON_OV0_GAMMA_040_07F, 0x100, 0x0080}, - {RADEON_OV0_GAMMA_080_0BF, 0x100, 0x0100}, - {RADEON_OV0_GAMMA_0C0_0FF, 0x100, 0x0100}, - {RADEON_OV0_GAMMA_100_13F, 0x100, 0x0200}, - {RADEON_OV0_GAMMA_140_17F, 0x100, 0x0200}, - {RADEON_OV0_GAMMA_180_1BF, 0x100, 0x0300}, - {RADEON_OV0_GAMMA_1C0_1FF, 0x100, 0x0300}, - {RADEON_OV0_GAMMA_200_23F, 0x100, 0x0400}, - {RADEON_OV0_GAMMA_240_27F, 0x100, 0x0400}, - {RADEON_OV0_GAMMA_280_2BF, 0x100, 0x0500}, - {RADEON_OV0_GAMMA_2C0_2FF, 0x100, 0x0500}, - {RADEON_OV0_GAMMA_300_33F, 0x100, 0x0600}, - {RADEON_OV0_GAMMA_340_37F, 0x100, 0x0600}, - {RADEON_OV0_GAMMA_380_3BF, 0x100, 0x0700}, - {RADEON_OV0_GAMMA_3C0_3FF, 0x100, 0x0700} -}; - -/**************************************************************************** - * SetTransform * - * Function: Calculates and sets color space transform from supplied * - * reference transform, gamma, brightness, contrast, hue and * - * saturation. * - * Inputs: bright - brightness * - * cont - contrast * - * sat - saturation * - * hue - hue * - * red_intensity - intensity of red component * - * green_intensity - intensity of green component * - * blue_intensity - intensity of blue component * - * ref - index to the table of refernce transforms * - * Outputs: NONE * - ****************************************************************************/ - -static void RADEONSetTransform (ScrnInfoPtr pScrn, - float bright, - float cont, - float sat, - float hue, - float red_intensity, - float green_intensity, - float blue_intensity, - CARD32 ref) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - float OvHueSin, OvHueCos; - float CAdjLuma, CAdjOff; - float CAdjRCb, CAdjRCr; - float CAdjGCb, CAdjGCr; - float CAdjBCb, CAdjBCr; - float RedAdj,GreenAdj,BlueAdj; - float OvLuma, OvROff, OvGOff, OvBOff; - float OvRCb, OvRCr; - float OvGCb, OvGCr; - float OvBCb, OvBCr; - float Loff = 64.0; - float Coff = 512.0f; - - CARD32 dwOvLuma, dwOvROff, dwOvGOff, dwOvBOff; - CARD32 dwOvRCb, dwOvRCr; - CARD32 dwOvGCb, dwOvGCr; - CARD32 dwOvBCb, dwOvBCr; - - if (ref >= 2) - return; - - OvHueSin = sin(hue); - OvHueCos = cos(hue); - - CAdjLuma = cont * trans[ref].RefLuma; - CAdjOff = cont * trans[ref].RefLuma * bright * 1023.0; - RedAdj = cont * trans[ref].RefLuma * red_intensity * 1023.0; - GreenAdj = cont * trans[ref].RefLuma * green_intensity * 1023.0; - BlueAdj = cont * trans[ref].RefLuma * blue_intensity * 1023.0; - - CAdjRCb = sat * -OvHueSin * trans[ref].RefRCr; - CAdjRCr = sat * OvHueCos * trans[ref].RefRCr; - CAdjGCb = sat * (OvHueCos * trans[ref].RefGCb - OvHueSin * trans[ref].RefGCr); - CAdjGCr = sat * (OvHueSin * trans[ref].RefGCb + OvHueCos * trans[ref].RefGCr); - CAdjBCb = sat * OvHueCos * trans[ref].RefBCb; - CAdjBCr = sat * OvHueSin * trans[ref].RefBCb; - -#if 0 /* default constants */ - CAdjLuma = 1.16455078125; - - CAdjRCb = 0.0; - CAdjRCr = 1.59619140625; - CAdjGCb = -0.39111328125; - CAdjGCr = -0.8125; - CAdjBCb = 2.01708984375; - CAdjBCr = 0; -#endif - OvLuma = CAdjLuma; - OvRCb = CAdjRCb; - OvRCr = CAdjRCr; - OvGCb = CAdjGCb; - OvGCr = CAdjGCr; - OvBCb = CAdjBCb; - OvBCr = CAdjBCr; - OvROff = RedAdj + CAdjOff - - OvLuma * Loff - (OvRCb + OvRCr) * Coff; - OvGOff = GreenAdj + CAdjOff - - OvLuma * Loff - (OvGCb + OvGCr) * Coff; - OvBOff = BlueAdj + CAdjOff - - OvLuma * Loff - (OvBCb + OvBCr) * Coff; -#if 0 /* default constants */ - OvROff = -888.5; - OvGOff = 545; - OvBOff = -1104; -#endif - - dwOvROff = ((INT32)(OvROff * 2.0)) & 0x1fff; - dwOvGOff = ((INT32)(OvGOff * 2.0)) & 0x1fff; - dwOvBOff = ((INT32)(OvBOff * 2.0)) & 0x1fff; - /* - * Whatever docs say about R200 having 3.8 format instead of 3.11 - * as in Radeon is a lie - * Or more precisely the location of bit fields is a lie - */ - if(1 || info->ChipFamily < CHIP_FAMILY_R200) - { - dwOvLuma =(((INT32)(OvLuma * 2048.0))&0x7fff)<<17; - dwOvRCb = (((INT32)(OvRCb * 2048.0))&0x7fff)<<1; - dwOvRCr = (((INT32)(OvRCr * 2048.0))&0x7fff)<<17; - dwOvGCb = (((INT32)(OvGCb * 2048.0))&0x7fff)<<1; - dwOvGCr = (((INT32)(OvGCr * 2048.0))&0x7fff)<<17; - dwOvBCb = (((INT32)(OvBCb * 2048.0))&0x7fff)<<1; - dwOvBCr = (((INT32)(OvBCr * 2048.0))&0x7fff)<<17; - } - else - { - dwOvLuma = (((INT32)(OvLuma * 256.0))&0x7ff)<<20; - dwOvRCb = (((INT32)(OvRCb * 256.0))&0x7ff)<<4; - dwOvRCr = (((INT32)(OvRCr * 256.0))&0x7ff)<<20; - dwOvGCb = (((INT32)(OvGCb * 256.0))&0x7ff)<<4; - dwOvGCr = (((INT32)(OvGCr * 256.0))&0x7ff)<<20; - dwOvBCb = (((INT32)(OvBCb * 256.0))&0x7ff)<<4; - dwOvBCr = (((INT32)(OvBCr * 256.0))&0x7ff)<<20; - } - OUTREG(RADEON_OV0_LIN_TRANS_A, dwOvRCb | dwOvLuma); - OUTREG(RADEON_OV0_LIN_TRANS_B, dwOvROff | dwOvRCr); - OUTREG(RADEON_OV0_LIN_TRANS_C, dwOvGCb | dwOvLuma); - OUTREG(RADEON_OV0_LIN_TRANS_D, dwOvGOff | dwOvGCr); - OUTREG(RADEON_OV0_LIN_TRANS_E, dwOvBCb | dwOvLuma); - OUTREG(RADEON_OV0_LIN_TRANS_F, dwOvBOff | dwOvBCr); -} - -static void RADEONSetColorKey(ScrnInfoPtr pScrn, CARD32 colorKey) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - CARD32 min, max; - CARD8 r, g, b; - - if (info->CurrentLayout.depth > 8) - { - CARD32 rbits, gbits, bbits; - - rbits = (colorKey & pScrn->mask.red) >> pScrn->offset.red; - gbits = (colorKey & pScrn->mask.green) >> pScrn->offset.green; - bbits = (colorKey & pScrn->mask.blue) >> pScrn->offset.blue; - - r = rbits << (8 - pScrn->weight.red); - g = gbits << (8 - pScrn->weight.green); - b = bbits << (8 - pScrn->weight.blue); - } - else - { - CARD32 bits; - - bits = colorKey & ((1 << info->CurrentLayout.depth) - 1); - r = bits; - g = bits; - b = bits; - } - min = (r << 16) | (g << 8) | (b); - max = (0xff << 24) | (r << 16) | (g << 8) | (b); - - RADEONWaitForFifo(pScrn, 2); - OUTREG(RADEON_OV0_GRAPHICS_KEY_CLR_HIGH, max); - OUTREG(RADEON_OV0_GRAPHICS_KEY_CLR_LOW, min); -} - -void -RADEONResetVideo(ScrnInfoPtr pScrn) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - RADEONPortPrivPtr pPriv = info->adaptor->pPortPrivates[0].ptr; - - if (info->accelOn) info->accel->Sync(pScrn); - - RADEONWaitForIdleMMIO(pScrn); - OUTREG(RADEON_OV0_SCALE_CNTL, 0x80000000); - OUTREG(RADEON_OV0_AUTO_FLIP_CNTL, 0); /* maybe */ - OUTREG(RADEON_OV0_EXCLUSIVE_HORZ, 0); - OUTREG(RADEON_OV0_FILTER_CNTL, 0x0000000f); - OUTREG(RADEON_OV0_KEY_CNTL, RADEON_GRAPHIC_KEY_FN_EQ | - RADEON_VIDEO_KEY_FN_FALSE | - RADEON_CMP_MIX_OR); - OUTREG(RADEON_OV0_TEST, 0); - OUTREG(RADEON_FCP_CNTL, RADEON_FCP0_SRC_GND); - OUTREG(RADEON_CAP0_TRIG_CNTL, 0); - RADEONSetColorKey(pScrn, pPriv->colorKey); - - if ((info->ChipFamily == CHIP_FAMILY_R300) || - (info->ChipFamily == CHIP_FAMILY_R350) || - (info->ChipFamily == CHIP_FAMILY_RV350) || - (info->ChipFamily == CHIP_FAMILY_R200) || - (info->ChipFamily == CHIP_FAMILY_RADEON)) { - int i; - - OUTREG(RADEON_OV0_LIN_TRANS_A, 0x12a20000); - OUTREG(RADEON_OV0_LIN_TRANS_B, 0x198a190e); - OUTREG(RADEON_OV0_LIN_TRANS_C, 0x12a2f9da); - OUTREG(RADEON_OV0_LIN_TRANS_D, 0xf2fe0442); - OUTREG(RADEON_OV0_LIN_TRANS_E, 0x12a22046); - OUTREG(RADEON_OV0_LIN_TRANS_F, 0x175f); - - /* - * Set default Gamma ramp: - * - * Of 18 segments for gamma curve, all segments in R200 (and - * newer) are programmable, while only lower 4 and upper 2 - * segments are programmable in the older Radeons. - */ - for (i = 0; i < 18; i++) { - OUTREG(def_gamma[i].gammaReg, - (def_gamma[i].gammaSlope<<16) | def_gamma[i].gammaOffset); - } - } else { - OUTREG(RADEON_OV0_LIN_TRANS_A, 0x12a00000); - OUTREG(RADEON_OV0_LIN_TRANS_B, 0x1990190e); - OUTREG(RADEON_OV0_LIN_TRANS_C, 0x12a0f9c0); - OUTREG(RADEON_OV0_LIN_TRANS_D, 0xf3000442); - OUTREG(RADEON_OV0_LIN_TRANS_E, 0x12a02040); - OUTREG(RADEON_OV0_LIN_TRANS_F, 0x175f); - } -} - - -static XF86VideoAdaptorPtr -RADEONAllocAdaptor(ScrnInfoPtr pScrn) -{ - XF86VideoAdaptorPtr adapt; - RADEONInfoPtr info = RADEONPTR(pScrn); - RADEONPortPrivPtr pPriv; - unsigned char *RADEONMMIO = info->MMIO; - CARD32 dot_clock; - - if(!(adapt = xf86XVAllocateVideoAdaptorRec(pScrn))) - return NULL; - - if(!(pPriv = xcalloc(1, sizeof(RADEONPortPrivRec) + sizeof(DevUnion)))) - { - xfree(adapt); - return NULL; - } - - adapt->pPortPrivates = (DevUnion*)(&pPriv[1]); - adapt->pPortPrivates[0].ptr = (pointer)pPriv; - - pPriv->colorKey = info->videoKey; - pPriv->doubleBuffer = TRUE; - pPriv->videoStatus = 0; - pPriv->brightness = 0; - pPriv->transform_index = 0; - pPriv->saturation = 0; - pPriv->contrast = 0; - pPriv->red_intensity = 0; - pPriv->green_intensity = 0; - pPriv->blue_intensity = 0; - pPriv->hue = 0; - pPriv->currentBuffer = 0; - pPriv->autopaint_colorkey = TRUE; - if (info->OverlayOnCRTC2) - pPriv->crt2 = TRUE; - else - pPriv->crt2 = FALSE; - - /* - * Unlike older Mach64 chips, RADEON has only two ECP settings: - * 0 for PIXCLK < 175Mhz, and 1 (divide by 2) - * for higher clocks, sure makes life nicer - */ - - /* Figure out which head we are on */ - if ((info->MergedFB && info->OverlayOnCRTC2) || info->IsSecondary) - dot_clock = info->ModeReg.dot_clock_freq_2; - else - dot_clock = info->ModeReg.dot_clock_freq; - - if(dot_clock < 17500) - pPriv->ecp_div = 0; - else - pPriv->ecp_div = 1; - - -#if 0 - xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Dotclock is %g Mhz, setting ecp_div to %d\n", info->ModeReg.dot_clock_freq/100.0, pPriv->ecp_div); -#endif - - OUTPLL(RADEON_VCLK_ECP_CNTL, (INPLL(pScrn, RADEON_VCLK_ECP_CNTL) & - 0xfffffCff) | (pPriv->ecp_div << 8)); - - /* I suspect we may need a usleep after writing to the PLL. if you play a video too soon - after switching crtcs in mergedfb clone mode you get a temporary one pixel line of colorkey - on the right edge video output. */ - - - if ((info->ChipFamily == CHIP_FAMILY_RS100) || - (info->ChipFamily == CHIP_FAMILY_RS200) || - (info->ChipFamily == CHIP_FAMILY_RS300)) { - /* Force the overlay clock on for integrated chips - */ - OUTPLL(RADEON_VCLK_ECP_CNTL, (INPLL(pScrn, RADEON_VCLK_ECP_CNTL) | (1<<18))); - } - - info->adaptor = adapt; - - return adapt; -} - -static XF86VideoAdaptorPtr -RADEONSetupImageVideo(ScreenPtr pScreen) -{ - ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - RADEONPortPrivPtr pPriv; - XF86VideoAdaptorPtr adapt; - - if(!(adapt = RADEONAllocAdaptor(pScrn))) - return NULL; - - adapt->type = XvWindowMask | XvInputMask | XvImageMask; - adapt->flags = VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT; - adapt->name = "ATI Radeon Video Overlay"; - adapt->nEncodings = 1; - adapt->pEncodings = &DummyEncoding; - adapt->nFormats = NUM_FORMATS; - adapt->pFormats = Formats; - adapt->nPorts = 1; - adapt->nAttributes = NUM_ATTRIBUTES; - adapt->pAttributes = Attributes; - adapt->nImages = NUM_IMAGES; - adapt->pImages = Images; - adapt->PutVideo = NULL; - adapt->PutStill = NULL; - adapt->GetVideo = NULL; - adapt->GetStill = NULL; - adapt->StopVideo = RADEONStopVideo; - adapt->SetPortAttribute = RADEONSetPortAttribute; - adapt->GetPortAttribute = RADEONGetPortAttribute; - adapt->QueryBestSize = RADEONQueryBestSize; - adapt->PutImage = RADEONPutImage; - adapt->QueryImageAttributes = RADEONQueryImageAttributes; - - pPriv = (RADEONPortPrivPtr)(adapt->pPortPrivates[0].ptr); - REGION_INIT(pScreen, &(pPriv->clip), NullBox, 0); - - xvBrightness = MAKE_ATOM("XV_BRIGHTNESS"); - xvSaturation = MAKE_ATOM("XV_SATURATION"); - xvColor = MAKE_ATOM("XV_COLOR"); - xvContrast = MAKE_ATOM("XV_CONTRAST"); - xvColorKey = MAKE_ATOM("XV_COLORKEY"); - xvDoubleBuffer = MAKE_ATOM("XV_DOUBLE_BUFFER"); - xvHue = MAKE_ATOM("XV_HUE"); - xvRedIntensity = MAKE_ATOM("XV_RED_INTENSITY"); - xvGreenIntensity = MAKE_ATOM("XV_GREEN_INTENSITY"); - xvBlueIntensity = MAKE_ATOM("XV_BLUE_INTENSITY"); - - xvAutopaintColorkey = MAKE_ATOM("XV_AUTOPAINT_COLORKEY"); - xvSetDefaults = MAKE_ATOM("XV_SET_DEFAULTS"); - xvSwitchCRT = MAKE_ATOM("XV_SWITCHCRT"); - - RADEONResetVideo(pScrn); - - return adapt; -} - -static void -RADEONStopVideo(ScrnInfoPtr pScrn, pointer data, Bool cleanup) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - RADEONPortPrivPtr pPriv = (RADEONPortPrivPtr)data; - - REGION_EMPTY(pScrn->pScreen, &pPriv->clip); - - if(cleanup) { - if(pPriv->videoStatus & CLIENT_VIDEO_ON) { - RADEONWaitForFifo(pScrn, 2); - OUTREG(RADEON_OV0_SCALE_CNTL, 0); - } - if(info->videoLinear) { - xf86FreeOffscreenLinear(info->videoLinear); - info->videoLinear = NULL; - } - pPriv->videoStatus = 0; - } else { - if(pPriv->videoStatus & CLIENT_VIDEO_ON) { - pPriv->videoStatus |= OFF_TIMER; - pPriv->offTime = currentTime.milliseconds + OFF_DELAY; - } - } -} - -static int -RADEONSetPortAttribute(ScrnInfoPtr pScrn, - Atom attribute, - INT32 value, - pointer data) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - RADEONPortPrivPtr pPriv = (RADEONPortPrivPtr)data; - Bool setTransform = FALSE; - - info->accel->Sync(pScrn); - -#define RTFSaturation(a) (1.0 + ((a)*1.0)/1000.0) -#define RTFBrightness(a) (((a)*1.0)/2000.0) -#define RTFIntensity(a) (((a)*1.0)/2000.0) -#define RTFContrast(a) (1.0 + ((a)*1.0)/1000.0) -#define RTFHue(a) (((a)*3.1416)/1000.0) -#define ClipValue(v,min,max) ((v) < (min) ? (min) : (v) > (max) ? (max) : (v)) - - if(attribute == xvAutopaintColorkey) - { - pPriv->autopaint_colorkey = ClipValue (value, 0, 1); - } - else if(attribute == xvSetDefaults) - { - pPriv->autopaint_colorkey = TRUE; - pPriv->brightness = 0; - pPriv->saturation = 0; - pPriv->contrast = 0; - pPriv->hue = 0; - pPriv->red_intensity = 0; - pPriv->green_intensity = 0; - pPriv->blue_intensity = 0; - pPriv->doubleBuffer = FALSE; - setTransform = TRUE; - } - else if(attribute == xvBrightness) - { - pPriv->brightness = ClipValue (value, -1000, 1000); - setTransform = TRUE; - } - else if((attribute == xvSaturation) || (attribute == xvColor)) - { - pPriv->saturation = ClipValue (value, -1000, 1000); - setTransform = TRUE; - } - else if(attribute == xvContrast) - { - pPriv->contrast = ClipValue (value, -1000, 1000); - setTransform = TRUE; - } - else if(attribute == xvHue) - { - pPriv->hue = ClipValue (value, -1000, 1000); - setTransform = TRUE; - } - else if(attribute == xvRedIntensity) - { - pPriv->red_intensity = ClipValue (value, -1000, 1000); - setTransform = TRUE; - } - else if(attribute == xvGreenIntensity) - { - pPriv->green_intensity = ClipValue (value, -1000, 1000); - setTransform = TRUE; - } - else if(attribute == xvBlueIntensity) - { - pPriv->blue_intensity = ClipValue (value, -1000, 1000); - setTransform = TRUE; - } - else if(attribute == xvDoubleBuffer) - { - pPriv->doubleBuffer = ClipValue (value, 0, 1); - pPriv->doubleBuffer = value; - } - else if(attribute == xvColorKey) - { - pPriv->colorKey = value; - RADEONSetColorKey (pScrn, pPriv->colorKey); - REGION_EMPTY(pScrn->pScreen, &pPriv->clip); - } - else if(attribute == xvSwitchCRT) - { - pPriv->crt2 = ClipValue (value, 0, 1); - pPriv->crt2 = value; - if (pPriv->crt2) - info->OverlayOnCRTC2 = TRUE; - else - info->OverlayOnCRTC2 = FALSE; - } - else - return BadMatch; - - if (setTransform) - { - RADEONSetTransform(pScrn, - RTFBrightness(pPriv->brightness), - RTFContrast(pPriv->contrast), - RTFSaturation(pPriv->saturation), - RTFHue(pPriv->hue), - RTFIntensity(pPriv->red_intensity), - RTFIntensity(pPriv->green_intensity), - RTFIntensity(pPriv->blue_intensity), - pPriv->transform_index); - } - - return Success; -} - -static int -RADEONGetPortAttribute(ScrnInfoPtr pScrn, - Atom attribute, - INT32 *value, - pointer data) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - RADEONPortPrivPtr pPriv = (RADEONPortPrivPtr)data; - - if (info->accelOn) info->accel->Sync(pScrn); - - if(attribute == xvAutopaintColorkey) - *value = pPriv->autopaint_colorkey; - else if(attribute == xvBrightness) - *value = pPriv->brightness; - else if((attribute == xvSaturation) || (attribute == xvColor)) - *value = pPriv->saturation; - else if(attribute == xvContrast) - *value = pPriv->contrast; - else if(attribute == xvHue) - *value = pPriv->hue; - else if(attribute == xvRedIntensity) - *value = pPriv->red_intensity; - else if(attribute == xvGreenIntensity) - *value = pPriv->green_intensity; - else if(attribute == xvBlueIntensity) - *value = pPriv->blue_intensity; - else if(attribute == xvDoubleBuffer) - *value = pPriv->doubleBuffer ? 1 : 0; - else if(attribute == xvColorKey) - *value = pPriv->colorKey; - else if(attribute == xvSwitchCRT) - *value = pPriv->crt2 ? 1 : 0; - else - return BadMatch; - - return Success; -} - -static void -RADEONQueryBestSize( - ScrnInfoPtr pScrn, - Bool motion, - short vid_w, short vid_h, - short drw_w, short drw_h, - unsigned int *p_w, unsigned int *p_h, - pointer data -){ - if(vid_w > (drw_w << 4)) - drw_w = vid_w >> 4; - if(vid_h > (drw_h << 4)) - drw_h = vid_h >> 4; - - *p_w = drw_w; - *p_h = drw_h; -} - -static void -RADEONCopyData( - unsigned char *src, - unsigned char *dst, - int srcPitch, - int dstPitch, - int h, - int w -){ - w <<= 1; - while(h--) { - memcpy(dst, src, w); - src += srcPitch; - dst += dstPitch; - } -} - -static void -RADEONCopyMungedData( - unsigned char *src1, - unsigned char *src2, - unsigned char *src3, - unsigned char *dst1, - int srcPitch, - int srcPitch2, - int dstPitch, - int h, - int w -){ - CARD32 *dst; - CARD8 *s1, *s2, *s3; - int i, j; - - w >>= 1; - - for(j = 0; j < h; j++) { - dst = (pointer)dst1; - s1 = src1; s2 = src2; s3 = src3; - i = w; - while(i > 4) { - dst[0] = s1[0] | (s1[1] << 16) | (s3[0] << 8) | (s2[0] << 24); - dst[1] = s1[2] | (s1[3] << 16) | (s3[1] << 8) | (s2[1] << 24); - dst[2] = s1[4] | (s1[5] << 16) | (s3[2] << 8) | (s2[2] << 24); - dst[3] = s1[6] | (s1[7] << 16) | (s3[3] << 8) | (s2[3] << 24); - dst += 4; s2 += 4; s3 += 4; s1 += 8; - i -= 4; - } - while(i--) { - dst[0] = s1[0] | (s1[1] << 16) | (s3[0] << 8) | (s2[0] << 24); - dst++; s2++; s3++; - s1 += 2; - } - - dst1 += dstPitch; - src1 += srcPitch; - if(j & 1) { - src2 += srcPitch2; - src3 += srcPitch2; - } - } -} - - -static FBLinearPtr -RADEONAllocateMemory( - ScrnInfoPtr pScrn, - FBLinearPtr linear, - int size -){ - ScreenPtr pScreen; - FBLinearPtr new_linear; - - if(linear) { - if(linear->size >= size) - return linear; - - if(xf86ResizeOffscreenLinear(linear, size)) - return linear; - - xf86FreeOffscreenLinear(linear); - } - - pScreen = screenInfo.screens[pScrn->scrnIndex]; - - new_linear = xf86AllocateOffscreenLinear(pScreen, size, 16, - NULL, NULL, NULL); - - if(!new_linear) { - int max_size; - - xf86QueryLargestOffscreenLinear(pScreen, &max_size, 16, - PRIORITY_EXTREME); - - if(max_size < size) - return NULL; - - xf86PurgeUnlockedOffscreenAreas(pScreen); - new_linear = xf86AllocateOffscreenLinear(pScreen, size, 16, - NULL, NULL, NULL); - } - - return new_linear; -} - -static void -RADEONDisplayVideo( - ScrnInfoPtr pScrn, - int id, - int offset1, int offset2, - short width, short height, - int pitch, - int left, int right, int top, - BoxPtr dstBox, - short src_w, short src_h, - short drw_w, short drw_h -){ - RADEONInfoPtr info = RADEONPTR(pScrn); - unsigned char *RADEONMMIO = info->MMIO; - int v_inc, h_inc, step_by, tmp; - int p1_h_accum_init, p23_h_accum_init; - int p1_v_accum_init; - int ecp_div; - int v_inc_shift; - int y_mult; - int x_off; - int y_off; - CARD32 scaler_src; - CARD32 dot_clock; - DisplayModePtr overlay_mode; - - /* Unlike older Mach64 chips, RADEON has only two ECP settings: 0 for PIXCLK < 175Mhz, and 1 (divide by 2) - for higher clocks, sure makes life nicer - - Here we need to find ecp_div again, as the user may have switched resolutions */ - - - /* Figure out which head we are on for dot clock */ - if ((info->MergedFB && info->OverlayOnCRTC2) || info->IsSecondary) - dot_clock = info->ModeReg.dot_clock_freq_2; - else - dot_clock = info->ModeReg.dot_clock_freq; - - if (dot_clock < 17500) - ecp_div = 0; - else - ecp_div = 1; - - OUTPLL(RADEON_VCLK_ECP_CNTL, (INPLL(pScrn, RADEON_VCLK_ECP_CNTL) & 0xfffffCff) | (ecp_div << 8)); - - /* I suspect we may need a usleep after writing to the PLL. if you play a video too soon - after switching crtcs in mergedfb clone mode you get a temporary one pixel line of colorkey - on the right edge video output. */ - - v_inc_shift = 20; - y_mult = 1; - - if (info->MergedFB) { - if (info->OverlayOnCRTC2) - overlay_mode = ((RADEONMergedDisplayModePtr)info->CurrentLayout.mode->Private)->CRT2; - else - overlay_mode = ((RADEONMergedDisplayModePtr)info->CurrentLayout.mode->Private)->CRT1; - if (overlay_mode->Flags & V_INTERLACE) - v_inc_shift++; - if (overlay_mode->Flags & V_DBLSCAN) { - v_inc_shift--; - y_mult = 2; - } - if (overlay_mode->Flags & RADEON_USE_RMX) { - v_inc = ((src_h * overlay_mode->CrtcVDisplay / info->PanelYRes) << v_inc_shift) / drw_h; - } else { - v_inc = (src_h << v_inc_shift) / drw_h; - } - } else { - if (pScrn->currentMode->Flags & V_INTERLACE) - v_inc_shift++; - if (pScrn->currentMode->Flags & V_DBLSCAN) { - v_inc_shift--; - y_mult = 2; - } - if (pScrn->currentMode->Flags & RADEON_USE_RMX) { - v_inc = ((src_h * pScrn->currentMode->CrtcVDisplay / info->PanelYRes) << v_inc_shift) / drw_h; - } else { - v_inc = (src_h << v_inc_shift) / drw_h; - } - } - h_inc = ((src_w << (12 + ecp_div)) / drw_w); - step_by = 1; - - while(h_inc >= (2 << 12)) { - step_by++; - h_inc >>= 1; - } - - /* keep everything in 16.16 */ - - offset1 += ((left >> 16) & ~7) << 1; - offset2 += ((left >> 16) & ~7) << 1; - - if (info->IsSecondary) { - offset1 += info->FbMapSize; - offset2 += info->FbMapSize; - } - - tmp = (left & 0x0003ffff) + 0x00028000 + (h_inc << 3); - p1_h_accum_init = ((tmp << 4) & 0x000f8000) | - ((tmp << 12) & 0xf0000000); - - tmp = ((left >> 1) & 0x0001ffff) + 0x00028000 + (h_inc << 2); - p23_h_accum_init = ((tmp << 4) & 0x000f8000) | - ((tmp << 12) & 0x70000000); - - tmp = (top & 0x0000ffff) + 0x00018000; - p1_v_accum_init = ((tmp << 4) & 0x03ff8000) | 0x00000001; - - left = (left >> 16) & 7; - - RADEONWaitForFifo(pScrn, 2); - OUTREG(RADEON_OV0_REG_LOAD_CNTL, 1); - if (info->accelOn) info->accel->Sync(pScrn); - while(!(INREG(RADEON_OV0_REG_LOAD_CNTL) & (1 << 3))); - - RADEONWaitForFifo(pScrn, 14); - OUTREG(RADEON_OV0_H_INC, h_inc | ((h_inc >> 1) << 16)); - OUTREG(RADEON_OV0_STEP_BY, step_by | (step_by << 8)); - - x_off = 8; - y_off = 0; - - if ((info->ChipFamily == CHIP_FAMILY_R300) || - (info->ChipFamily == CHIP_FAMILY_R350) || - (info->ChipFamily == CHIP_FAMILY_RV350) || - (info->ChipFamily == CHIP_FAMILY_R200)) - x_off = 0; - - /* needed to make the overlay work on crtc1 in leftof and above modes */ - if (info->MergedFB) { - RADEONScrn2Rel srel = - ((RADEONMergedDisplayModePtr)info->CurrentLayout.mode->Private)->CRT2Position; - overlay_mode = ((RADEONMergedDisplayModePtr)info->CurrentLayout.mode->Private)->CRT2; - if (srel == radeonLeftOf) { - x_off -= overlay_mode->CrtcHDisplay; - /* y_off -= pScrn->frameY0; */ - } - if (srel == radeonAbove) { - y_off -= overlay_mode->CrtcVDisplay; - /* x_off -= pScrn->frameX0; */ - } - } - - /* Put the hardware overlay on CRTC2: - * - * Since one hardware overlay can not be displayed on two heads - * at the same time, we might need to consider using software - * rendering for the second head. - */ - - if ((info->MergedFB && info->OverlayOnCRTC2) || info->IsSecondary) { - x_off = 0; - OUTREG(RADEON_OV1_Y_X_START, ((dstBox->x1 + x_off) | - ((dstBox->y1*y_mult) << 16))); - OUTREG(RADEON_OV1_Y_X_END, ((dstBox->x2 + x_off) | - ((dstBox->y2*y_mult) << 16))); - scaler_src = (1 << 14); - } else { - OUTREG(RADEON_OV0_Y_X_START, ((dstBox->x1 + x_off) | - (((dstBox->y1*y_mult) + y_off) << 16))); - OUTREG(RADEON_OV0_Y_X_END, ((dstBox->x2 + x_off) | - (((dstBox->y2*y_mult) + y_off) << 16))); - scaler_src = 0; - } - - OUTREG(RADEON_OV0_V_INC, v_inc); - OUTREG(RADEON_OV0_P1_BLANK_LINES_AT_TOP, 0x00000fff | ((src_h - 1) << 16)); - OUTREG(RADEON_OV0_VID_BUF_PITCH0_VALUE, pitch); - OUTREG(RADEON_OV0_VID_BUF_PITCH1_VALUE, pitch); - OUTREG(RADEON_OV0_P1_X_START_END, (src_w + left - 1) | (left << 16)); - left >>= 1; src_w >>= 1; - OUTREG(RADEON_OV0_P2_X_START_END, (src_w + left - 1) | (left << 16)); - OUTREG(RADEON_OV0_P3_X_START_END, (src_w + left - 1) | (left << 16)); - OUTREG(RADEON_OV0_VID_BUF0_BASE_ADRS, offset1 & 0xfffffff0); - OUTREG(RADEON_OV0_VID_BUF1_BASE_ADRS, offset2 & 0xfffffff0); - OUTREG(RADEON_OV0_VID_BUF2_BASE_ADRS, offset1 & 0xfffffff0); - - RADEONWaitForFifo(pScrn, 9); - OUTREG(RADEON_OV0_VID_BUF3_BASE_ADRS, offset2 & 0xfffffff0); - OUTREG(RADEON_OV0_VID_BUF4_BASE_ADRS, offset1 & 0xfffffff0); - OUTREG(RADEON_OV0_VID_BUF5_BASE_ADRS, offset2 & 0xfffffff0); - OUTREG(RADEON_OV0_P1_V_ACCUM_INIT, p1_v_accum_init); - OUTREG(RADEON_OV0_P1_H_ACCUM_INIT, p1_h_accum_init); - OUTREG(RADEON_OV0_P23_H_ACCUM_INIT, p23_h_accum_init); - -#if 0 - if(id == FOURCC_UYVY) - OUTREG(RADEON_OV0_SCALE_CNTL, 0x41008C03); - else - OUTREG(RADEON_OV0_SCALE_CNTL, 0x41008B03); -#endif - - if (id == FOURCC_UYVY) - OUTREG(RADEON_OV0_SCALE_CNTL, (RADEON_SCALER_SOURCE_YVYU422 - | RADEON_SCALER_ADAPTIVE_DEINT - | RADEON_SCALER_SMART_SWITCH - | RADEON_SCALER_DOUBLE_BUFFER - | RADEON_SCALER_ENABLE - | scaler_src)); - else - OUTREG(RADEON_OV0_SCALE_CNTL, (RADEON_SCALER_SOURCE_VYUY422 - | RADEON_SCALER_ADAPTIVE_DEINT - | RADEON_SCALER_SMART_SWITCH - | RADEON_SCALER_DOUBLE_BUFFER - | RADEON_SCALER_ENABLE - | scaler_src)); - - OUTREG(RADEON_OV0_REG_LOAD_CNTL, 0); -} - - -static int -RADEONPutImage( - ScrnInfoPtr pScrn, - short src_x, short src_y, - short drw_x, short drw_y, - short src_w, short src_h, - short drw_w, short drw_h, - int id, unsigned char* buf, - short width, short height, - Bool Sync, - RegionPtr clipBoxes, pointer data -){ - RADEONInfoPtr info = RADEONPTR(pScrn); - RADEONPortPrivPtr pPriv = (RADEONPortPrivPtr)data; - INT32 xa, xb, ya, yb; - unsigned char *dst_start; - int pitch, new_size, offset, s2offset, s3offset; - int srcPitch, srcPitch2, dstPitch; - int top, left, npixels, nlines, bpp; - BoxRec dstBox; - CARD32 tmp; -#if X_BYTE_ORDER == X_BIG_ENDIAN - unsigned char *RADEONMMIO = info->MMIO; - CARD32 surface_cntl = INREG(RADEON_SURFACE_CNTL); - - OUTREG(RADEON_SURFACE_CNTL, (surface_cntl | - RADEON_NONSURF_AP0_SWP_32BPP) & ~RADEON_NONSURF_AP0_SWP_16BPP); -#endif - - /* - * s2offset, s3offset - byte offsets into U and V plane of the - * source where copying starts. Y plane is - * done by editing "buf". - * - * offset - byte offset to the first line of the destination. - * - * dst_start - byte address to the first displayed pel. - * - */ - - /* make the compiler happy */ - s2offset = s3offset = srcPitch2 = 0; - - if(src_w > (drw_w << 4)) - drw_w = src_w >> 4; - if(src_h > (drw_h << 4)) - drw_h = src_h >> 4; - - /* Clip */ - xa = src_x; - xb = src_x + src_w; - ya = src_y; - yb = src_y + src_h; - - dstBox.x1 = drw_x; - dstBox.x2 = drw_x + drw_w; - dstBox.y1 = drw_y; - dstBox.y2 = drw_y + drw_h; - - if (info->MergedFB) - RADEONChooseOverlayCRTC(pScrn, &dstBox); - - if(!xf86XVClipVideoHelper(&dstBox, &xa, &xb, &ya, &yb, - clipBoxes, width, height)) - return Success; - - if (info->MergedFB && info->OverlayOnCRTC2) { - dstBox.x1 -= info->CRT2pScrn->frameX0; - dstBox.x2 -= info->CRT2pScrn->frameX0; - dstBox.y1 -= info->CRT2pScrn->frameY0; - dstBox.y2 -= info->CRT2pScrn->frameY0; - } else { - dstBox.x1 -= pScrn->frameX0; - dstBox.x2 -= pScrn->frameX0; - dstBox.y1 -= pScrn->frameY0; - dstBox.y2 -= pScrn->frameY0; - } - - bpp = pScrn->bitsPerPixel >> 3; - pitch = bpp * pScrn->displayWidth; - - switch(id) { - case FOURCC_YV12: - case FOURCC_I420: - dstPitch = ((width << 1) + 15) & ~15; - new_size = ((dstPitch * height) + bpp - 1) / bpp; - srcPitch = (width + 3) & ~3; - s2offset = srcPitch * height; - srcPitch2 = ((width >> 1) + 3) & ~3; - s3offset = (srcPitch2 * (height >> 1)) + s2offset; - break; - case FOURCC_UYVY: - case FOURCC_YUY2: - default: - dstPitch = ((width << 1) + 15) & ~15; - new_size = ((dstPitch * height) + bpp - 1) / bpp; - srcPitch = (width << 1); - break; - } - - if(!(info->videoLinear = RADEONAllocateMemory(pScrn, info->videoLinear, - pPriv->doubleBuffer ? (new_size << 1) : new_size))) - { - return BadAlloc; - } - - pPriv->currentBuffer ^= 1; - - /* copy data */ - top = ya >> 16; - left = (xa >> 16) & ~1; - npixels = ((((xb + 0xffff) >> 16) + 1) & ~1) - left; - - offset = (info->videoLinear->offset * bpp) + (top * dstPitch); - if(pPriv->doubleBuffer) - offset += pPriv->currentBuffer * new_size * bpp; - - dst_start = info->FB + offset; - - switch(id) { - case FOURCC_YV12: - case FOURCC_I420: - top &= ~1; - dst_start += left << 1; - tmp = ((top >> 1) * srcPitch2) + (left >> 1); - s2offset += tmp; - s3offset += tmp; - if(id == FOURCC_I420) { - tmp = s2offset; - s2offset = s3offset; - s3offset = tmp; - } - nlines = ((((yb + 0xffff) >> 16) + 1) & ~1) - top; -#if X_BYTE_ORDER == X_BIG_ENDIAN - OUTREG(RADEON_SURFACE_CNTL, (surface_cntl | RADEON_NONSURF_AP0_SWP_32BPP) - & ~RADEON_NONSURF_AP0_SWP_16BPP); -#endif - RADEONCopyMungedData(buf + (top * srcPitch) + left, buf + s2offset, - buf + s3offset, dst_start, srcPitch, srcPitch2, - dstPitch, nlines, npixels); - break; - case FOURCC_UYVY: - case FOURCC_YUY2: - default: - left <<= 1; - buf += (top * srcPitch) + left; - nlines = ((yb + 0xffff) >> 16) - top; - dst_start += left; -#if X_BYTE_ORDER == X_BIG_ENDIAN - OUTREG(RADEON_SURFACE_CNTL, surface_cntl & ~(RADEON_NONSURF_AP0_SWP_32BPP - | RADEON_NONSURF_AP0_SWP_16BPP)); -#endif - RADEONCopyData(buf, dst_start, srcPitch, dstPitch, nlines, npixels); - break; - } - -#if X_BYTE_ORDER == X_BIG_ENDIAN - /* restore byte swapping */ - OUTREG(RADEON_SURFACE_CNTL, surface_cntl); -#endif - - /* update cliplist */ - if(!REGION_EQUAL(pScrn->pScreen, &pPriv->clip, clipBoxes)) - { - REGION_COPY(pScrn->pScreen, &pPriv->clip, clipBoxes); - /* draw these */ - if(pPriv->autopaint_colorkey) - xf86XVFillKeyHelper(pScrn->pScreen, pPriv->colorKey, clipBoxes); - } - - RADEONDisplayVideo(pScrn, id, offset, offset, width, height, dstPitch, - xa, xb, ya, &dstBox, src_w, src_h, drw_w, drw_h); - - pPriv->videoStatus = CLIENT_VIDEO_ON; - - info->VideoTimerCallback = RADEONVideoTimerCallback; - - return Success; -} - - -static int -RADEONQueryImageAttributes( - ScrnInfoPtr pScrn, - int id, - unsigned short *w, unsigned short *h, - int *pitches, int *offsets -){ - int size, tmp; - - if(*w > 2048) *w = 2048; - if(*h > 2048) *h = 2048; - - *w = (*w + 1) & ~1; - if(offsets) offsets[0] = 0; - - switch(id) { - case FOURCC_YV12: - case FOURCC_I420: - *h = (*h + 1) & ~1; - size = (*w + 3) & ~3; - if(pitches) pitches[0] = size; - size *= *h; - if(offsets) offsets[1] = size; - tmp = ((*w >> 1) + 3) & ~3; - if(pitches) pitches[1] = pitches[2] = tmp; - tmp *= (*h >> 1); - size += tmp; - if(offsets) offsets[2] = size; - size += tmp; - break; - case FOURCC_UYVY: - case FOURCC_YUY2: - default: - size = *w << 1; - if(pitches) pitches[0] = size; - size *= *h; - break; - } - - return size; -} - -static void -RADEONVideoTimerCallback(ScrnInfoPtr pScrn, Time now) -{ - RADEONInfoPtr info = RADEONPTR(pScrn); - RADEONPortPrivPtr pPriv = info->adaptor->pPortPrivates[0].ptr; - - if(pPriv->videoStatus & TIMER_MASK) { - if(pPriv->videoStatus & OFF_TIMER) { - if(pPriv->offTime < now) { - unsigned char *RADEONMMIO = info->MMIO; - OUTREG(RADEON_OV0_SCALE_CNTL, 0); - pPriv->videoStatus = FREE_TIMER; - pPriv->freeTime = now + FREE_DELAY; - } - } else { /* FREE_TIMER */ - if(pPriv->freeTime < now) { - if(info->videoLinear) { - xf86FreeOffscreenLinear(info->videoLinear); - info->videoLinear = NULL; - } - pPriv->videoStatus = 0; - info->VideoTimerCallback = NULL; - } - } - } else /* shouldn't get here */ - info->VideoTimerCallback = NULL; -} - -/****************** Offscreen stuff ***************/ -typedef struct { - FBLinearPtr linear; - Bool isOn; -} OffscreenPrivRec, * OffscreenPrivPtr; - -static int -RADEONAllocateSurface( - ScrnInfoPtr pScrn, - int id, - unsigned short w, - unsigned short h, - XF86SurfacePtr surface -){ - FBLinearPtr linear; - int pitch, fbpitch, size, bpp; - OffscreenPrivPtr pPriv; - if((w > 1024) || (h > 1024)) - return BadAlloc; - - w = (w + 1) & ~1; - pitch = ((w << 1) + 15) & ~15; - bpp = pScrn->bitsPerPixel >> 3; - fbpitch = bpp * pScrn->displayWidth; - size = ((pitch * h) + bpp - 1) / bpp; - - if(!(linear = RADEONAllocateMemory(pScrn, NULL, size))) - return BadAlloc; - - surface->width = w; - surface->height = h; - - if(!(surface->pitches = xalloc(sizeof(int)))) { - xf86FreeOffscreenLinear(linear); - return BadAlloc; - } - if(!(surface->offsets = xalloc(sizeof(int)))) { - xfree(surface->pitches); - xf86FreeOffscreenLinear(linear); - return BadAlloc; - } - if(!(pPriv = xalloc(sizeof(OffscreenPrivRec)))) { - xfree(surface->pitches); - xfree(surface->offsets); - xf86FreeOffscreenLinear(linear); - return BadAlloc; - } - - pPriv->linear = linear; - pPriv->isOn = FALSE; - - surface->pScrn = pScrn; - surface->id = id; - surface->pitches[0] = pitch; - surface->offsets[0] = linear->offset * bpp; - surface->devPrivate.ptr = (pointer)pPriv; - - return Success; -} - -static int -RADEONStopSurface( - XF86SurfacePtr surface -){ - OffscreenPrivPtr pPriv = (OffscreenPrivPtr)surface->devPrivate.ptr; - RADEONInfoPtr info = RADEONPTR(surface->pScrn); - unsigned char *RADEONMMIO = info->MMIO; - - if(pPriv->isOn) { - OUTREG(RADEON_OV0_SCALE_CNTL, 0); - pPriv->isOn = FALSE; - } - return Success; -} - - -static int -RADEONFreeSurface( - XF86SurfacePtr surface -){ - OffscreenPrivPtr pPriv = (OffscreenPrivPtr)surface->devPrivate.ptr; - - if(pPriv->isOn) - RADEONStopSurface(surface); - xf86FreeOffscreenLinear(pPriv->linear); - xfree(surface->pitches); - xfree(surface->offsets); - xfree(surface->devPrivate.ptr); - - return Success; -} - -static int -RADEONGetSurfaceAttribute( - ScrnInfoPtr pScrn, - Atom attribute, - INT32 *value -){ - return RADEONGetPortAttribute(pScrn, attribute, value, - (pointer)(GET_PORT_PRIVATE(pScrn))); -} - -static int -RADEONSetSurfaceAttribute( - ScrnInfoPtr pScrn, - Atom attribute, - INT32 value -){ - return RADEONSetPortAttribute(pScrn, attribute, value, - (pointer)(GET_PORT_PRIVATE(pScrn))); -} - - -static int -RADEONDisplaySurface( - XF86SurfacePtr surface, - short src_x, short src_y, - short drw_x, short drw_y, - short src_w, short src_h, - short drw_w, short drw_h, - RegionPtr clipBoxes -){ - OffscreenPrivPtr pPriv = (OffscreenPrivPtr)surface->devPrivate.ptr; - ScrnInfoPtr pScrn = surface->pScrn; - - RADEONInfoPtr info = RADEONPTR(pScrn); - RADEONPortPrivPtr portPriv = info->adaptor->pPortPrivates[0].ptr; - - INT32 xa, ya, xb, yb; - BoxRec dstBox; - - if (src_w > (drw_w << 4)) - drw_w = src_w >> 4; - if (src_h > (drw_h << 4)) - drw_h = src_h >> 4; - - xa = src_x; - xb = src_x + src_w; - ya = src_y; - yb = src_y + src_h; - - dstBox.x1 = drw_x; - dstBox.x2 = drw_x + drw_w; - dstBox.y1 = drw_y; - dstBox.y2 = drw_y + drw_h; - - if (info->MergedFB) - RADEONChooseOverlayCRTC(pScrn, &dstBox); - - if (!xf86XVClipVideoHelper(&dstBox, &xa, &xb, &ya, &yb, clipBoxes, - surface->width, surface->height)) - return Success; - - if (info->MergedFB && info->OverlayOnCRTC2) { - dstBox.x1 -= info->CRT2pScrn->frameX0; - dstBox.x2 -= info->CRT2pScrn->frameX0; - dstBox.y1 -= info->CRT2pScrn->frameY0; - dstBox.y2 -= info->CRT2pScrn->frameY0; - } else { - dstBox.x1 -= pScrn->frameX0; - dstBox.x2 -= pScrn->frameX0; - dstBox.y1 -= pScrn->frameY0; - dstBox.y2 -= pScrn->frameY0; - } - - RADEONResetVideo(pScrn); - - RADEONDisplayVideo(pScrn, surface->id, - surface->offsets[0], surface->offsets[0], - surface->width, surface->height, surface->pitches[0], - xa, xb, ya, &dstBox, src_w, src_h, drw_w, drw_h); - - if (portPriv->autopaint_colorkey) - xf86XVFillKeyHelper(pScrn->pScreen, portPriv->colorKey, clipBoxes); - - pPriv->isOn = TRUE; - /* we've prempted the XvImage stream so set its free timer */ - if (portPriv->videoStatus & CLIENT_VIDEO_ON) { - REGION_EMPTY(pScrn->pScreen, &portPriv->clip); - UpdateCurrentTime(); - portPriv->videoStatus = FREE_TIMER; - portPriv->freeTime = currentTime.milliseconds + FREE_DELAY; - info->VideoTimerCallback = RADEONVideoTimerCallback; - } - - return Success; -} - - -static void -RADEONInitOffscreenImages(ScreenPtr pScreen) -{ -/* ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - RADEONInfoPtr info = RADEONPTR(pScrn); */ - XF86OffscreenImagePtr offscreenImages; - /* need to free this someplace */ - - if (!(offscreenImages = xalloc(sizeof(XF86OffscreenImageRec)))) - return; - - offscreenImages[0].image = &Images[0]; - offscreenImages[0].flags = VIDEO_OVERLAID_IMAGES | - VIDEO_CLIP_TO_VIEWPORT; - offscreenImages[0].alloc_surface = RADEONAllocateSurface; - offscreenImages[0].free_surface = RADEONFreeSurface; - offscreenImages[0].display = RADEONDisplaySurface; - offscreenImages[0].stop = RADEONStopSurface; - offscreenImages[0].setAttribute = RADEONSetSurfaceAttribute; - offscreenImages[0].getAttribute = RADEONGetSurfaceAttribute; - offscreenImages[0].max_width = 1024; - offscreenImages[0].max_height = 1024; - offscreenImages[0].num_attributes = NUM_ATTRIBUTES; - offscreenImages[0].attributes = Attributes; - - xf86XVRegisterOffscreenImages(pScreen, offscreenImages, 1); -} |