diff options
Diffstat (limited to 'man/radeon.man')
| -rw-r--r-- | man/radeon.man | 11 |
1 files changed, 7 insertions, 4 deletions
diff --git a/man/radeon.man b/man/radeon.man index 8514c1cc..28b13853 100644 --- a/man/radeon.man +++ b/man/radeon.man @@ -306,8 +306,11 @@ The default value is Forces the X driver to use the EDID data specified in a file rather than the display's EDID. Also overrides DDC monitor detection. .br -You may specify a semicolon separated list of output name and filename pairs. -The output name is something like "VGA-0" or "DVI-0"; +You may specify a semicolon separated list of output name and filename pairs +with an optional flag, "digital" or "analog", to override the digital bit in +the edid which is used by the driver to determine whether to use the +analog or digital encoder associated with a DVI-I port. +The output name is the randr output name, e.g., "VGA-0" or "DVI-0"; consult the Xorg log for the supported output names of any given system. .br The file must contain a raw 128-byte EDID block, as captured by @@ -316,10 +319,10 @@ get-edid. .br For example: .B -Option \*qCustomEDID\*q \*qVGA-0:/tmp/edid1.bin; DVI-0:/tmp/edid2.bin\*q +Option \*qCustomEDID\*q \*qVGA-0:/tmp/edid1.bin; DVI-0:/tmp/edid2.bin:digital\*q will assign the EDID from the file /tmp/edid1.bin to the output device VGA-0, and the EDID from the file /tmp/edid2.bin to the output device -DVI-0. +DVI-0 and force the DVI port to use the digital encoder. .br Note that a output name must always be specified, even if only one EDID is specified. |