diff options
Diffstat (limited to 'src/atidsp.c')
| -rw-r--r-- | src/atidsp.c | 329 |
1 files changed, 0 insertions, 329 deletions
diff --git a/src/atidsp.c b/src/atidsp.c deleted file mode 100644 index 4cc2a053..00000000 --- a/src/atidsp.c +++ /dev/null @@ -1,329 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atidsp.c,v 1.20 2003/04/23 21:51:28 tsi Exp $ */ -/* - * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atichip.h" -#include "aticrtc.h" -#include "atidsp.h" -#include "atimach64io.h" -#include "atividmem.h" - -/* - * ATIDSPPreInit -- - * - * This function initialises global variables used to set DSP registers on a - * VT-B or later. - */ -Bool -ATIDSPPreInit -( - int iScreen, - ATIPtr pATI -) -{ - CARD32 IOValue, dsp_config, dsp_on_off, vga_dsp_config, vga_dsp_on_off; - int trp; - - /* - * VT-B's and later have additional post-dividers that are not powers of - * two. - */ - pATI->ClockDescriptor.NumD = 8; - - /* Retrieve XCLK settings */ - IOValue = ATIMach64GetPLLReg(PLL_XCLK_CNTL); - pATI->XCLKPostDivider = GetBits(IOValue, PLL_XCLK_SRC_SEL); - pATI->XCLKReferenceDivider = 1; - switch (pATI->XCLKPostDivider) - { - case 0: case 1: case 2: case 3: - break; - - case 4: - pATI->XCLKReferenceDivider = 3; - pATI->XCLKPostDivider = 0; - break; - - default: - xf86DrvMsg(iScreen, X_ERROR, - "Unsupported XCLK source: %d.\n", pATI->XCLKPostDivider); - return FALSE; - } - - pATI->XCLKPostDivider -= GetBits(IOValue, PLL_MFB_TIMES_4_2B); - pATI->XCLKFeedbackDivider = ATIMach64GetPLLReg(PLL_MCLK_FB_DIV); - - xf86DrvMsgVerb(iScreen, X_INFO, 2, - "Engine XCLK %.3f MHz; Refresh rate code %d.\n", - ATIDivide(pATI->XCLKFeedbackDivider * pATI->ReferenceNumerator, - pATI->XCLKReferenceDivider * pATI->ClockDescriptor.MaxM * - pATI->ReferenceDenominator, 1 - pATI->XCLKPostDivider, 0) / - (double)1000.0, - GetBits(pATI->LockData.mem_cntl, CTL_MEM_REFRESH_RATE_B)); - - /* Compute maximum RAS delay and friends */ - trp = GetBits(pATI->LockData.mem_cntl, CTL_MEM_TRP); - pATI->XCLKPageFaultDelay = GetBits(pATI->LockData.mem_cntl, CTL_MEM_TRCD) + - GetBits(pATI->LockData.mem_cntl, CTL_MEM_TCRD) + trp + 2; - pATI->XCLKMaxRASDelay = GetBits(pATI->LockData.mem_cntl, CTL_MEM_TRAS) + - trp + 2; - pATI->DisplayFIFODepth = 32; - - if (pATI->Chip < ATI_CHIP_264VT4) - { - pATI->XCLKPageFaultDelay += 2; - pATI->XCLKMaxRASDelay += 3; - pATI->DisplayFIFODepth = 24; - } - - switch (pATI->MemoryType) - { - case MEM_264_DRAM: - if (pATI->VideoRAM <= 1024) - { - pATI->DisplayLoopLatency = 10; - } - else - { - pATI->DisplayLoopLatency = 8; - pATI->XCLKPageFaultDelay += 2; - } - break; - - case MEM_264_EDO: - case MEM_264_PSEUDO_EDO: - if (pATI->VideoRAM <= 1024) - { - pATI->DisplayLoopLatency = 9; - } - else - { - pATI->DisplayLoopLatency = 8; - pATI->XCLKPageFaultDelay++; - } - break; - - case MEM_264_SDRAM: - if (pATI->VideoRAM <= 1024) - { - pATI->DisplayLoopLatency = 11; - } - else - { - pATI->DisplayLoopLatency = 10; - pATI->XCLKPageFaultDelay++; - } - break; - - case MEM_264_SGRAM: - pATI->DisplayLoopLatency = 8; - pATI->XCLKPageFaultDelay += 3; - break; - - default: /* Set maximums */ - pATI->DisplayLoopLatency = 11; - pATI->XCLKPageFaultDelay += 3; - break; - } - - if (pATI->XCLKMaxRASDelay <= pATI->XCLKPageFaultDelay) - pATI->XCLKMaxRASDelay = pATI->XCLKPageFaultDelay + 1; - - /* Allow BIOS to override */ - dsp_config = inr(DSP_CONFIG); - dsp_on_off = inr(DSP_ON_OFF); - vga_dsp_config = inr(VGA_DSP_CONFIG); - vga_dsp_on_off = inr(VGA_DSP_ON_OFF); - - if (dsp_config) - pATI->DisplayLoopLatency = GetBits(dsp_config, DSP_LOOP_LATENCY); - - if ((!dsp_on_off && (pATI->Chip < ATI_CHIP_264GTPRO)) || - ((dsp_on_off == vga_dsp_on_off) && - (!dsp_config || !((dsp_config ^ vga_dsp_config) & DSP_XCLKS_PER_QW)))) - { - if (ATIDivide(GetBits(vga_dsp_on_off, VGA_DSP_OFF), - GetBits(vga_dsp_config, VGA_DSP_XCLKS_PER_QW), 5, 1) > 24) - pATI->DisplayFIFODepth = 32; - else - pATI->DisplayFIFODepth = 24; - } - - return TRUE; -} - -/* - * ATIDSPSave -- - * - * This function is called to remember DSP register values on VT-B and later - * controllers. - */ -void -ATIDSPSave -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - pATIHW->dsp_on_off = inr(DSP_ON_OFF); - pATIHW->dsp_config = inr(DSP_CONFIG); -} - - -/* - * ATIDSPCalculate -- - * - * This function sets up DSP register values for a VTB or later. Note that - * this would be slightly different if VCLK 0 or 1 were used for the mode - * instead. In that case, this function would set VGA_DSP_CONFIG and - * VGA_DSP_ON_OFF, would have to zero out DSP_CONFIG and DSP_ON_OFF, and would - * have to consider that VGA_DSP_CONFIG is partitioned slightly differently - * than DSP_CONFIG. - */ -void -ATIDSPCalculate -( - ATIPtr pATI, - ATIHWPtr pATIHW, - DisplayModePtr pMode -) -{ - int Multiplier, Divider; - int RASMultiplier = pATI->XCLKMaxRASDelay, RASDivider = 1; - int dsp_precision, dsp_on, dsp_off, dsp_xclks; - int tmp, vshift, xshift; - -# define Maximum_DSP_PRECISION ((int)MaxBits(DSP_PRECISION)) - - /* Compute a memory-to-screen bandwidth ratio */ - Multiplier = pATI->XCLKFeedbackDivider * - pATI->ClockDescriptor.PostDividers[pATIHW->PostDivider]; - Divider = pATIHW->FeedbackDivider * pATI->XCLKReferenceDivider; - -#ifndef AVOID_CPIO - - if (pATI->depth >= 8) - -#endif /* AVOID_CPIO */ - - { - Divider *= pATI->bitsPerPixel / 4; - } - - /* Start by assuming a display FIFO width of 64 bits */ - vshift = (6 - 2) - pATI->XCLKPostDivider; - -#ifndef AVOID_CPIO - - if (pATIHW->crtc == ATI_CRTC_VGA) - vshift--; /* Nope, it's 32 bits wide */ - -#endif /* AVOID_CPIO */ - - if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0)) - { - /* Compensate for horizontal stretching */ - Multiplier *= pATI->LCDHorizontal; - Divider *= pMode->HDisplay & ~7; - - RASMultiplier *= pATI->LCDHorizontal; - RASDivider *= pMode->HDisplay & ~7; - } - - /* Determine dsp_precision first */ - tmp = ATIDivide(Multiplier * pATI->DisplayFIFODepth, Divider, vshift, -1); - for (dsp_precision = -5; tmp; dsp_precision++) - tmp >>= 1; - if (dsp_precision < 0) - dsp_precision = 0; - else if (dsp_precision > Maximum_DSP_PRECISION) - dsp_precision = Maximum_DSP_PRECISION; - - xshift = 6 - dsp_precision; - vshift += xshift; - - /* Move on to dsp_off */ - dsp_off = ATIDivide(Multiplier * (pATI->DisplayFIFODepth - 1), Divider, - vshift, -1) - ATIDivide(1, 1, vshift - xshift, 1); - - /* Next is dsp_on */ - -#ifndef AVOID_CPIO - - if ((pATIHW->crtc == ATI_CRTC_VGA) /* && (dsp_precision < 3) */) - { - /* - * TODO: I don't yet know why something like this appears necessary. - * But I don't have time to explore this right now. - */ - dsp_on = ATIDivide(Multiplier * 5, Divider, vshift + 2, 1); - } - else - -#endif /* AVOID_CPIO */ - - { - dsp_on = ATIDivide(Multiplier, Divider, vshift, 1); - tmp = ATIDivide(RASMultiplier, RASDivider, xshift, 1); - if (dsp_on < tmp) - dsp_on = tmp; - dsp_on += (tmp * 2) + - ATIDivide(pATI->XCLKPageFaultDelay, 1, xshift, 1); - } - - /* Calculate rounding factor and apply it to dsp_on */ - tmp = ((1 << (Maximum_DSP_PRECISION - dsp_precision)) - 1) >> 1; - dsp_on = ((dsp_on + tmp) / (tmp + 1)) * (tmp + 1); - - if (dsp_on >= ((dsp_off / (tmp + 1)) * (tmp + 1))) - { - dsp_on = dsp_off - ATIDivide(Multiplier, Divider, vshift, -1); - dsp_on = (dsp_on / (tmp + 1)) * (tmp + 1); - } - - /* Last but not least: dsp_xclks */ - dsp_xclks = ATIDivide(Multiplier, Divider, vshift + 5, 1); - - /* Build DSP register contents */ - pATIHW->dsp_on_off = SetBits(dsp_on, DSP_ON) | - SetBits(dsp_off, DSP_OFF); - pATIHW->dsp_config = SetBits(dsp_precision, DSP_PRECISION) | - SetBits(dsp_xclks, DSP_XCLKS_PER_QW) | - SetBits(pATI->DisplayLoopLatency, DSP_LOOP_LATENCY); -} - -/* - * ATIDSPSet -- - * - * This function is called to set DSP registers on VT-B and later controllers. - */ -void -ATIDSPSet -( - ATIPtr pATI, - ATIHWPtr pATIHW -) -{ - outr(DSP_ON_OFF, pATIHW->dsp_on_off); - outr(DSP_CONFIG, pATIHW->dsp_config); -} |