summaryrefslogtreecommitdiff
path: root/src/atipreinit.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/atipreinit.c')
-rw-r--r--src/atipreinit.c614
1 files changed, 502 insertions, 112 deletions
diff --git a/src/atipreinit.c b/src/atipreinit.c
index 675b036d..914476a1 100644
--- a/src/atipreinit.c
+++ b/src/atipreinit.c
@@ -1,4 +1,4 @@
-/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atipreinit.c,v 1.65 2003/01/01 19:16:33 tsi Exp $ */
+/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atipreinit.c,v 1.71 2003/11/13 21:21:34 tsi Exp $ */
/*
* Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org
*
@@ -24,22 +24,26 @@
#include "ati.h"
#include "atiadapter.h"
#include "atiadjust.h"
+#include "atiaudio.h"
#include "atibus.h"
#include "atichip.h"
#include "aticonfig.h"
#include "aticursor.h"
#include "atidac.h"
#include "atidsp.h"
+#include "atii2c.h"
#include "atiident.h"
#include "atiload.h"
#include "atilock.h"
#include "atimach64.h"
+#include "atimach64accel.h"
#include "atimach64io.h"
#include "atimode.h"
#include "atipreinit.h"
#include "atiprint.h"
#include "atividmem.h"
#include "atiwonderio.h"
+#include "atixv.h"
#include "vbe.h"
#include "xf86RAC.h"
@@ -248,12 +252,14 @@ ATIMach32videoRam
/* Test for lost pixels */
AllPixelsOK = TRUE;
ForEachTestPixel
+ {
if (ATIMach32ReadPixel(TestPixel.x, TestPixel.y) !=
Test_Pixel[Pixel_Number])
{
AllPixelsOK = FALSE;
break;
}
+ }
/* Restore clobbered pixels */
ForEachTestPixel
@@ -319,8 +325,10 @@ ATIReportMemory
#endif /* AVOID_CPIO */
if (pATI->VideoRAM > pScreenInfo->videoRam)
+ {
Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message,
" (using %d kB)", pScreenInfo->videoRam);
+ }
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, "%s.\n", Buffer);
}
@@ -330,12 +338,12 @@ static const rgb defaultWeight = {0, 0, 0};
static const Gamma defaultGamma = {0.0, 0.0, 0.0};
/*
- * ATIMapMach64 --
+ * ATIMach64Map --
*
* This function attempts to mmap() a Mach64's MMIO aperture.
*/
static void
-ATIMapMach64
+ATIMach64Map
(
int iScreen,
ATIPtr pATI
@@ -394,7 +402,8 @@ ATIPreInit
(BIOS[(_n) + 3] << 24)))
unsigned int BIOSSize = 0;
unsigned int ROMTable = 0, ClockTable = 0, FrequencyTable = 0;
- unsigned int LCDTable = 0, LCDPanelInfo = 0;
+ unsigned int LCDTable = 0, LCDPanelInfo = 0, VideoTable = 0;
+ unsigned int HardwareTable = 0;
char Buffer[128], *Message;
ATIPtr pATI;
@@ -412,7 +421,9 @@ ATIPreInit
int DefaultmaxClock = 0;
int minPitch, maxPitch = 0xFFU, maxHeight = 0;
int ApertureSize = 0x00010000U;
+ int ModeType = M_T_BUILTIN;
LookupModeFlags Strategy = LOOKUP_CLOSEST_CLOCK;
+ int DefaultDepth;
# define pATIHW (&pATI->OldHW)
@@ -509,10 +520,17 @@ ATIPreInit
/* Set depth, bpp, etc. */
if ((pATI->Chipset != ATI_CHIPSET_ATI) ||
(pATI->Chip < ATI_CHIP_264CT))
+ {
i = NoDepth24Support; /* No support for >8bpp either */
+ DefaultDepth = 8;
+ }
else
+ {
i = Support24bppFb | Support32bppFb;
- if (!xf86SetDepthBpp(pScreenInfo, 8, 8, 8, i))
+ DefaultDepth = 0;
+ }
+
+ if (!xf86SetDepthBpp(pScreenInfo, DefaultDepth, 0, 0, i))
return FALSE;
for (j = 0; ; j++)
@@ -573,7 +591,9 @@ ATIPreInit
#ifdef AVOID_CPIO
else /* if (flags & PROBE_DETECT) */
+ {
return TRUE;
+ }
#else /* AVOID_CPIO */
@@ -582,20 +602,28 @@ ATIPreInit
* has been executed, and retrieve DDC and VBE information from it.
*/
if (!(pInt10Module = ATILoadModule(pScreenInfo, "int10", ATIint10Symbols)))
+ {
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Unable to load int10 module.\n");
+ }
else if (!(pInt10Info = xf86InitInt10(pATI->iEntity)))
+ {
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Unable to initialise int10 interface.\n");
+ }
else
{
if (!(pDDCModule = ATILoadModule(pScreenInfo, "ddc", ATIddcSymbols)))
+ {
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Unable to load ddc module.\n");
+ }
else
if (!(pVBEModule = ATILoadModule(pScreenInfo, "vbe", ATIvbeSymbols)))
+ {
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Unable to load vbe module.\n");
+ }
else
{
if ((pVBE = VBEInit(pInt10Info, pATI->iEntity)))
@@ -612,8 +640,10 @@ ATIPreInit
CARD8 *pBIOS = xf86int10Addr(pInt10Info, pInt10Info->BIOSseg << 4);
if ((pBIOS[0] != 0x55U) || (pBIOS[1] != 0xAAU) || !pBIOS[2])
+ {
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Unable to correctly retrieve adapter BIOS.\n");
+ }
else
{
BIOSSize = pBIOS[2] << 9;
@@ -722,6 +752,7 @@ ATIPreInit
pATI->LCDPanelID = -1;
pATI->nFIFOEntries = 16; /* For now */
+ pATI->Audio = ATI_AUDIO_NONE;
/* Finish probing the adapter */
switch (pATI->Adapter)
@@ -805,12 +836,12 @@ ATIPreInit
if ((pATI->Block0Base = pVideo->memBase[0]))
{
pATI->Block0Base += 0x007FFC00U;
- ATIMapMach64(pScreenInfo->scrnIndex, pATI);
+ ATIMach64Map(pScreenInfo->scrnIndex, pATI);
if (pATI->pBlock[0])
break;
pATI->Block0Base -= 0x00400000U;
- ATIMapMach64(pScreenInfo->scrnIndex, pATI);
+ ATIMach64Map(pScreenInfo->scrnIndex, pATI);
if (pATI->pBlock[0])
break;
}
@@ -820,7 +851,7 @@ ATIPreInit
pATI->Block0Base = 0x000BFC00U;
}
- ATIMapMach64(pScreenInfo->scrnIndex, pATI);
+ ATIMach64Map(pScreenInfo->scrnIndex, pATI);
} while (0);
pATI->Block0Base = Block0Base;
@@ -862,8 +893,10 @@ ATIPreInit
pATIHW->mem_cntl = inr(MEM_CNTL);
if (pATI->Chip < ATI_CHIP_264VTB)
+ {
pATI->VideoRAM =
videoRamSizes[GetBits(pATIHW->mem_cntl, CTL_MEM_SIZE) + 2];
+ }
else
{
pATI->nFIFOEntries = /* Don't care */
@@ -885,7 +918,7 @@ ATIPreInit
{
pATI->MemoryType = GetBits(IOValue, CFG_MEM_TYPE_T);
- /* Get LCD panel id and set LCD & TV I/O port numbers */
+ /* Get LCD panel id */
if (pATI->Chip == ATI_CHIP_264LT)
{
pATI->LCDPanelID = GetBits(IOValue, CFG_PANEL_ID);
@@ -902,7 +935,7 @@ ATIPreInit
pATIHW->lcd_index = inr(LCD_INDEX);
pATIHW->horz_stretching =
- ATIGetMach64LCDReg(LCD_HORZ_STRETCHING);
+ ATIMach64GetLCDReg(LCD_HORZ_STRETCHING);
pATI->LCDHorizontal =
GetBits(pATIHW->horz_stretching, HORZ_PANEL_SIZE);
if (pATI->LCDHorizontal)
@@ -914,7 +947,7 @@ ATIPreInit
(pATI->LCDHorizontal + 1) << 3;
}
pATIHW->ext_vert_stretch =
- ATIGetMach64LCDReg(LCD_EXT_VERT_STRETCH);
+ ATIMach64GetLCDReg(LCD_EXT_VERT_STRETCH);
pATI->LCDVertical =
GetBits(pATIHW->ext_vert_stretch, VERT_PANEL_SIZE);
if (pATI->LCDVertical)
@@ -925,8 +958,8 @@ ATIPreInit
pATI->LCDVertical++;
}
pATIHW->vert_stretching =
- ATIGetMach64LCDReg(LCD_VERT_STRETCHING);
- pATIHW->lcd_gen_ctrl = ATIGetMach64LCDReg(LCD_GEN_CNTL);
+ ATIMach64GetLCDReg(LCD_VERT_STRETCHING);
+ pATIHW->lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL);
outr(LCD_INDEX, pATIHW->lcd_index);
}
@@ -993,7 +1026,9 @@ ATIPreInit
pATI->ClockNumberToProgramme = -1;
ROMTable = BIOSWord(0x48U);
- if ((ROMTable + 0x12U) > BIOSSize)
+ if ((ROMTable < 0x0002U) ||
+ (BIOSWord(ROMTable - 0x02U) < 0x0012U) ||
+ ((ROMTable + BIOSWord(ROMTable - 0x02U)) > BIOSSize))
ROMTable = 0;
if (ROMTable > 0)
@@ -1001,6 +1036,26 @@ ATIPreInit
ClockTable = BIOSWord(ROMTable + 0x10U);
if ((ClockTable + 0x20U) > BIOSSize)
ClockTable = 0;
+
+ if (BIOSWord(ROMTable - 0x02U) >= 0x0048U)
+ {
+ VideoTable = BIOSWord(ROMTable + 0x46U);
+ if ((VideoTable < 0x08U) ||
+ (BIOSByte(VideoTable - 0x01U) < 0x08U) ||
+ (BIOSByte(VideoTable - 0x02U) > 0x01U) ||
+ ((VideoTable + BIOSByte(VideoTable - 0x01U)) > BIOSSize))
+ VideoTable = 0;
+ }
+
+ if (BIOSWord(ROMTable - 0x02U) >= 0x004AU)
+ {
+ HardwareTable = BIOSWord(ROMTable + 0x48U);
+ if (((HardwareTable + 0x08U) <= BIOSSize) &&
+ !memcmp(BIOS + HardwareTable, "$ATI", 4))
+ pATI->I2CType = BIOSByte(HardwareTable + 0x06U) & 0x0FU;
+ else
+ HardwareTable = 0;
+ }
}
if (ClockTable > 0)
@@ -1043,7 +1098,9 @@ ATIPreInit
* frequency has already been set by option processing.
*/
if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL)
+ {
pATI->ProgrammableClock = ATI_CLOCK_INTERNAL;
+ }
else switch (pATI->DAC)
{
case ATI_DAC_STG1703:
@@ -1135,7 +1192,7 @@ ATIPreInit
* graphics controller's tolerance.
*/
pATI->ClockDescriptor.MinM = pATI->ClockDescriptor.MaxM =
- ATIGetMach64PLLReg(PLL_REF_DIV);
+ ATIMach64GetPLLReg(PLL_REF_DIV);
/* The DAC is also integrated */
if ((pATI->DAC & ~0x0FU) != ATI_DAC_INTERNAL)
@@ -1178,7 +1235,55 @@ ATIPreInit
pATI->ClockNumberToProgramme = 7;
}
else
+ {
pATI->DAC = ClockDac; /* For now */
+ }
+ }
+
+ /*
+ * Pick up multimedia information, which will be at different
+ * displacements depending on table revision.
+ */
+ if (VideoTable > 0)
+ {
+ switch (BIOSByte(VideoTable - 0x02U))
+ {
+ case 0x00U:
+ pATI->Tuner = BIOSByte(VideoTable) & 0x1FU;
+
+ /*
+ * XXX The VideoTable[1] byte is known to have been
+ * omitted in LTPro and Mobility BIOS'es. Any others?
+ */
+ switch (pATI->Chip)
+ {
+ case ATI_CHIP_264LTPRO:
+ case ATI_CHIP_MOBILITY:
+ pATI->Decoder =
+ BIOSByte(VideoTable + 0x01U) & 0x07U;
+ pATI->Audio =
+ BIOSByte(VideoTable + 0x02U) & 0x0FU;
+ break;
+
+ default:
+ pATI->Decoder =
+ BIOSByte(VideoTable + 0x02U) & 0x07U;
+ pATI->Audio =
+ BIOSByte(VideoTable + 0x03U) & 0x0FU;
+ break;
+ }
+
+ break;
+
+ case 0x01U:
+ pATI->Tuner = BIOSByte(VideoTable) & 0x1FU;
+ pATI->Audio = BIOSByte(VideoTable + 0x01U) & 0x0FU;
+ pATI->Decoder = BIOSByte(VideoTable + 0x05U) & 0x0FU;
+ break;
+
+ default:
+ break;
+ }
}
/* Determine panel dimensions */
@@ -1213,11 +1318,13 @@ ATIPreInit
/* ... followed by 24-byte panel model name ... */
for (j = 0; j < 24; j++)
+ {
if ((CARD8)(BIOSByte(i + j + 1) - 0x20U) > 0x5FU)
{
i += j;
goto NextBIOSByte;
}
+ }
/* ... verify panel width ... */
if (pATI->LCDHorizontal &&
@@ -1262,6 +1369,23 @@ ATIPreInit
pATI->LCDVertical = BIOSWord(LCDPanelInfo + 0x1BU);
}
}
+
+ xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3,
+ "BIOS Data: BIOSSize=0x%04X, ROMTable=0x%04X.\n",
+ BIOSSize, ROMTable);
+ xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3,
+ "BIOS Data: ClockTable=0x%04X, FrequencyTable=0x%04X.\n",
+ ClockTable, FrequencyTable);
+ xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3,
+ "BIOS Data: LCDTable=0x%04X, LCDPanelInfo=0x%04X.\n",
+ LCDTable, LCDPanelInfo);
+ xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3,
+ "BIOS Data: VideoTable=0x%04X, HardwareTable=0x%04X.\n",
+ VideoTable, HardwareTable);
+ xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3,
+ "BIOS Data: I2CType=0x%02X, Tuner=0x%02X, Decoder=0x%02X,"
+ " Audio=0x%02X.\n",
+ pATI->I2CType, pATI->Tuner, pATI->Decoder, pATI->Audio);
}
ATIUnlock(pATI); /* Unlock registers */
@@ -1323,7 +1447,6 @@ ATIPreInit
#ifndef AVOID_CPIO
if (pATI->Adapter >= ATI_ADAPTER_MACH64)
-
{
Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message,
"; %s I/O base is 0x%04lX",
@@ -1340,7 +1463,7 @@ ATIPreInit
if (pATI->CPIO_VGAWonder)
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
- "VGA Wonder registers at I/O port 0x%04X.\n",
+ "VGA Wonder registers at I/O port 0x%04lX.\n",
pATI->CPIO_VGAWonder);
if (pATI->Coprocessor != ATI_CHIP_NONE)
@@ -1360,8 +1483,10 @@ ATIPreInit
" adapter, please see http://gatos.sf.net.\n");
if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL)
+ {
xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
"Internal RAMDAC (subtype %d) detected.\n", pATI->DAC & 0x0FU);
+ }
else
{
const SymTabRec *DAC;
@@ -1424,8 +1549,8 @@ ATIPreInit
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR,
"Driver does not support weight %d%d%d for depth %d.\n",
- pScreenInfo->weight.red, pScreenInfo->weight.green,
- pScreenInfo->weight.blue, pScreenInfo->depth);
+ (int)pScreenInfo->weight.red, (int)pScreenInfo->weight.green,
+ (int)pScreenInfo->weight.blue, pScreenInfo->depth);
ATILock(pATI);
ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize);
ATIUnmapApertures(pScreenInfo->scrnIndex, pATI);
@@ -1585,77 +1710,223 @@ ATIPreInit
}
else
{
- int HDisplay, VDisplay;
+ unsigned HDisplay, VDisplay;
CARD8 ClockMask, PostMask;
/*
- * Determine porch data. The following is inaccurate (but still
- * good enough) when BIOS initialisation has set things up so that
- * the registers read here are not the ones actually in use by the
- * panel. Thus, a further refinement here would be to flip back
- * and forth between shadow and non-shadow registers as dictated by
- * the various LCD_GEN_CNTL and CONFIG_PANEL bits involved.
- *
- * This groks the mode on entry to extract the width and position
- * of its sync and blanking pulses, and considers any overscan as
- * part of the displayed area, given that the overscan is also
- * stretched.
+ * Determine porch data. This groks the mode on entry to extract
+ * the width and position of its sync and blanking pulses, and
+ * considers any overscan as part of the displayed area, given that
+ * the overscan is also stretched.
*
* This also attempts to determine panel dimensions but cannot do
* so for one that is "auto-stretched".
*/
+ if (pATI->Chip == ATI_CHIP_264LT)
+ {
+ pATIHW->lcd_gen_ctrl = inr(LCD_GEN_CTRL);
+
+ /* Set up to read non-shadow registers */
+ if (pATIHW->lcd_gen_ctrl & SHADOW_RW_EN)
+ outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl & ~SHADOW_RW_EN);
+ }
+ else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
+ (pATI->Chip == ATI_CHIP_264XL) ||
+ (pATI->Chip == ATI_CHIP_MOBILITY)) */
+ {
+ pATIHW->lcd_index = inr(LCD_INDEX);
+ pATIHW->config_panel = ATIMach64GetLCDReg(LCD_CONFIG_PANEL);
+ pATIHW->lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL);
+
+ /* Set up to read non-shadow registers */
+ if (pATIHW->lcd_gen_ctrl & SHADOW_RW_EN)
+ ATIMach64PutLCDReg(LCD_GEN_CNTL,
+ pATIHW->lcd_gen_ctrl & ~SHADOW_RW_EN);
+ }
+
#ifndef AVOID_CPIO
if (!(pATIHW->crtc_gen_cntl & CRTC_EXT_DISP_EN))
{
+ unsigned HBlankStart, HSyncStart, HSyncEnd, HBlankEnd, HTotal;
+ unsigned VBlankStart, VSyncStart, VSyncEnd, VBlankEnd, VTotal;
+
pATIHW->clock = (inb(R_GENMO) & 0x0CU) >> 2;
- pATIHW->crt[0] = GetReg(CRTX(pATI->CPIO_VGABase), 0x00U);
pATIHW->crt[2] = GetReg(CRTX(pATI->CPIO_VGABase), 0x02U);
pATIHW->crt[3] = GetReg(CRTX(pATI->CPIO_VGABase), 0x03U);
- pATIHW->crt[4] = GetReg(CRTX(pATI->CPIO_VGABase), 0x04U);
pATIHW->crt[5] = GetReg(CRTX(pATI->CPIO_VGABase), 0x05U);
- pATIHW->crt[6] = GetReg(CRTX(pATI->CPIO_VGABase), 0x06U);
pATIHW->crt[7] = GetReg(CRTX(pATI->CPIO_VGABase), 0x07U);
pATIHW->crt[9] = GetReg(CRTX(pATI->CPIO_VGABase), 0x09U);
- pATIHW->crt[16] = GetReg(CRTX(pATI->CPIO_VGABase), 0x10U);
- pATIHW->crt[17] = GetReg(CRTX(pATI->CPIO_VGABase), 0x11U);
pATIHW->crt[21] = GetReg(CRTX(pATI->CPIO_VGABase), 0x15U);
pATIHW->crt[22] = GetReg(CRTX(pATI->CPIO_VGABase), 0x16U);
- pATI->LCDHSyncWidth =
- (pATIHW->crt[5] - pATIHW->crt[4]) & 0x1FU;
- pATI->LCDHBlankWidth = (((pATIHW->crt[3] & 0x1FU) |
- ((pATIHW->crt[5] >> 2) & 0x20U)) -
- pATIHW->crt[2]) & 0x3FU;
- pATI->LCDVSyncWidth =
- (pATIHW->crt[17] - pATIHW->crt[16]) & 0x0FU;
- pATI->LCDVBlankWidth =
- ((pATIHW->crt[22] - pATIHW->crt[21]) & 0xFFU) + 1;
+ pATIHW->crtc_h_total_disp = inr(CRTC_H_TOTAL_DISP);
+ pATIHW->crtc_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID);
+ pATIHW->crtc_v_total_disp = inr(CRTC_V_TOTAL_DISP);
+ pATIHW->crtc_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID);
- pATI->LCDHSyncStart =
- ((pATIHW->crt[4] - pATIHW->crt[2]) & 0xFFU) + 1;
- pATI->LCDVSyncStart = (((((pATIHW->crt[7] << 2) & 0x0200U) |
- ((pATIHW->crt[7] << 6) & 0x0100U) |
- pATIHW->crt[16]) -
- (((pATIHW->crt[9] << 4) & 0x0200U) |
- ((pATIHW->crt[7] << 5) & 0x0100U) |
- pATIHW->crt[21])) & 0xFFU) + 1;
-
- HDisplay = pATI->LCDHSyncStart + pATI->LCDHSyncWidth -
- pATI->LCDHBlankWidth;
- if (HDisplay > 0)
- pATI->LCDHBlankWidth += (HDisplay + 0x3FU) & ~0x3FU;
- VDisplay = pATI->LCDVSyncStart + pATI->LCDVSyncWidth -
- pATI->LCDVBlankWidth;
- if (VDisplay > 0)
- pATI->LCDVBlankWidth += (VDisplay + 0xFFU) & ~0xFFU;
-
- HDisplay = pATIHW->crt[0] + 5 - pATI->LCDHBlankWidth;
- VDisplay = (((pATIHW->crt[7] << 4) & 0x0200U) |
- ((pATIHW->crt[7] << 8) & 0x0100U) |
- pATIHW->crt[6]) + 3 - pATI->LCDVBlankWidth;
+ /* Switch to shadow registers */
+ if (pATI->Chip == ATI_CHIP_264LT)
+ outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl | SHADOW_RW_EN);
+ else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
+ (pATI->Chip == ATI_CHIP_264XL) ||
+ (pATI->Chip == ATI_CHIP_MOBILITY)) */
+ ATIMach64PutLCDReg(LCD_GEN_CNTL,
+ pATIHW->lcd_gen_ctrl | SHADOW_RW_EN);
+
+ pATIHW->shadow_vga[2] =
+ GetReg(CRTX(pATI->CPIO_VGABase), 0x02U);
+ pATIHW->shadow_vga[3] =
+ GetReg(CRTX(pATI->CPIO_VGABase), 0x03U);
+ pATIHW->shadow_vga[5] =
+ GetReg(CRTX(pATI->CPIO_VGABase), 0x05U);
+ pATIHW->shadow_vga[7] =
+ GetReg(CRTX(pATI->CPIO_VGABase), 0x07U);
+ pATIHW->shadow_vga[9] =
+ GetReg(CRTX(pATI->CPIO_VGABase), 0x09U);
+ pATIHW->shadow_vga[21] =
+ GetReg(CRTX(pATI->CPIO_VGABase), 0x15U);
+ pATIHW->shadow_vga[22] =
+ GetReg(CRTX(pATI->CPIO_VGABase), 0x16U);
+
+ pATIHW->shadow_h_total_disp = inr(CRTC_H_TOTAL_DISP);
+ pATIHW->shadow_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID);
+ pATIHW->shadow_v_total_disp = inr(CRTC_V_TOTAL_DISP);
+ pATIHW->shadow_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID);
+
+ /*
+ * HSyncStart and HSyncEnd should equal their shadow
+ * counterparts. Otherwise, due to a chip bug, the panel might
+ * not sync, regardless of which register set is used to drive
+ * the panel. There are certain combinations of register
+ * values where the panel does in fact sync, but it remains
+ * impossible to accurately determine the horizontal sync pulse
+ * timing actually seen by the panel.
+ *
+ * Note that this hardware bug does not affect the CRT output.
+ */
+ if (((pATIHW->crtc_h_sync_strt_wid ^
+ pATIHW->shadow_h_sync_strt_wid) &
+ (CRTC_H_SYNC_STRT | CRTC_H_SYNC_STRT_HI |
+ CRTC_H_SYNC_WID)))
+ {
+ xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_NOTICE, 0,
+ "Invalid horizontal sync pulse timing detected in mode"
+ " on server entry.\n");
+
+ /* Don't trust input timing */
+ pATI->OptionLCDSync = TRUE;
+ ModeType = 0;
+ }
+
+ /* Merge in shadow registers as appropriate */
+ if (pATIHW->lcd_gen_ctrl & SHADOW_EN)
+ {
+ pATIHW->crt[2] = pATIHW->shadow_vga[2];
+ pATIHW->crt[3] = pATIHW->shadow_vga[3];
+ pATIHW->crt[5] = pATIHW->shadow_vga[5];
+
+ /* XXX Does this apply to VGA? If so, what about the LT? */
+ if ((pATI->Chip < ATI_CHIP_264LTPRO) ||
+ !(pATIHW->config_panel & DONT_SHADOW_HEND))
+ {
+ pATIHW->crtc_h_total_disp &= ~CRTC_H_DISP;
+ pATIHW->crtc_h_total_disp |=
+ pATIHW->shadow_h_total_disp & CRTC_H_DISP;
+ }
+
+ pATIHW->crtc_h_total_disp &= ~CRTC_H_TOTAL;
+ pATIHW->crtc_h_total_disp |=
+ pATIHW->shadow_h_total_disp & CRTC_H_TOTAL;
+ pATIHW->crtc_h_sync_strt_wid =
+ pATIHW->shadow_h_sync_strt_wid;
+
+ /* XXX Does this apply to VGA? */
+ if (pATIHW->lcd_gen_ctrl & USE_SHADOWED_VEND)
+ {
+ pATIHW->crtc_v_total_disp &= ~CRTC_V_DISP;
+ pATIHW->crtc_v_total_disp |=
+ pATIHW->shadow_v_total_disp & CRTC_V_DISP;
+ }
+
+ if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR))
+ {
+ pATIHW->crt[7] = pATIHW->shadow_vga[7];
+ pATIHW->crt[9] = pATIHW->shadow_vga[9];
+ pATIHW->crt[21] = pATIHW->shadow_vga[21];
+ pATIHW->crt[22] = pATIHW->shadow_vga[22];
+
+ pATIHW->crtc_v_total_disp &= ~CRTC_V_TOTAL;
+ pATIHW->crtc_v_total_disp |=
+ pATIHW->shadow_v_total_disp & CRTC_V_TOTAL;
+ }
+ }
+
+ if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR))
+ pATIHW->crtc_v_sync_strt_wid =
+ pATIHW->shadow_v_sync_strt_wid;
+
+ /*
+ * Decipher input timing. This is complicated by the fact that
+ * the full width of all timing parameters, except for the
+ * blanking pulses, is only available through the accelerator
+ * registers, not the VGA ones. Blanking pulse boundaries must
+ * then be interpolated.
+ *
+ * Note that, in VGA mode, the accelerator's sync width fields
+ * are actually end positions, not widths.
+ */
+ HDisplay = GetBits(pATIHW->crtc_h_total_disp, CRTC_H_DISP);
+ HSyncStart =
+ (GetBits(pATIHW->crtc_h_sync_strt_wid,
+ CRTC_H_SYNC_STRT_HI) *
+ (MaxBits(CRTC_H_SYNC_STRT) + 1)) |
+ GetBits(pATIHW->crtc_h_sync_strt_wid, CRTC_H_SYNC_STRT);
+ HSyncEnd = (HSyncStart & ~MaxBits(CRTC_H_SYNC_WID)) |
+ GetBits(pATIHW->crtc_h_sync_strt_wid, CRTC_H_SYNC_WID);
+ if (HSyncStart >= HSyncEnd)
+ HSyncEnd += MaxBits(CRTC_H_SYNC_WID) + 1;
+ HTotal = GetBits(pATIHW->crtc_h_total_disp, CRTC_H_TOTAL);
+
+ HBlankStart = (HDisplay & ~0xFFU) | pATIHW->crt[2];
+ if (HDisplay > HBlankStart)
+ HBlankStart += 0x0100U;
+ HBlankEnd = (HSyncEnd & ~0x3FU) |
+ ((pATIHW->crt[5] >> 2) & 0x20U) |
+ (pATIHW->crt[3] & 0x1FU);
+ if (HSyncEnd > (HBlankEnd + 1))
+ HBlankEnd += 0x40U;
+
+ VDisplay = GetBits(pATIHW->crtc_v_total_disp, CRTC_V_DISP);
+ VSyncStart =
+ GetBits(pATIHW->crtc_v_sync_strt_wid, CRTC_V_SYNC_STRT);
+ VSyncEnd = (VSyncStart & ~MaxBits(CRTC_V_SYNC_WID)) |
+ GetBits(pATIHW->crtc_v_sync_strt_wid, CRTC_V_SYNC_WID);
+ if (VSyncStart > VSyncEnd)
+ VSyncEnd += MaxBits(CRTC_V_SYNC_WID) + 1;
+ VTotal = GetBits(pATIHW->crtc_v_total_disp, CRTC_V_TOTAL);
+
+ VBlankStart = (VDisplay & ~0x03FFU) |
+ ((pATIHW->crt[9] << 4) & 0x0200U) |
+ ((pATIHW->crt[7] << 5) & 0x0100U) | pATIHW->crt[21];
+ if (VDisplay > VBlankStart)
+ VBlankStart += 0x0400U;
+ VBlankEnd = (VSyncEnd & ~0x00FFU) | pATIHW->crt[22];
+ if (VSyncEnd > (VBlankEnd + 1))
+ VBlankEnd += 0x0100U;
+
+ pATI->LCDHBlankWidth = HBlankEnd - HBlankStart;
+ pATI->LCDHSyncStart = HSyncStart - HBlankStart - 1;
+ pATI->LCDHSyncWidth = HSyncEnd - HSyncStart;
+
+ pATI->LCDVBlankWidth = VBlankEnd - VBlankStart;
+ pATI->LCDVSyncStart = VSyncStart - VBlankStart - 1;
+ pATI->LCDVSyncWidth = VSyncEnd - VSyncStart;
+
+ HDisplay = HTotal + 5 - pATI->LCDHBlankWidth;
+ VDisplay = VTotal + 2 - pATI->LCDVBlankWidth;
}
else
@@ -1671,6 +1942,84 @@ ATIPreInit
pATIHW->ovr_wid_left_right = inr(OVR_WID_LEFT_RIGHT);
pATIHW->ovr_wid_top_bottom = inr(OVR_WID_TOP_BOTTOM);
+ /* Switch to shadow registers */
+ if (pATI->Chip == ATI_CHIP_264LT)
+ outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl | SHADOW_RW_EN);
+ else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
+ (pATI->Chip == ATI_CHIP_264XL) ||
+ (pATI->Chip == ATI_CHIP_MOBILITY)) */
+ ATIMach64PutLCDReg(LCD_GEN_CNTL,
+ pATIHW->lcd_gen_ctrl | SHADOW_RW_EN);
+
+ /* Oddly enough, there are no shadow overscan registers */
+ pATIHW->shadow_h_total_disp = inr(CRTC_H_TOTAL_DISP);
+ pATIHW->shadow_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID);
+ pATIHW->shadow_v_total_disp = inr(CRTC_V_TOTAL_DISP);
+ pATIHW->shadow_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID);
+
+ /*
+ * HSyncStart and HSyncEnd should equal their shadow
+ * counterparts. Otherwise, due to a chip bug, the panel might
+ * not sync, regardless of which register set is used to drive
+ * the panel. There are certain combinations of register
+ * values where the panel does in fact sync, but it remains
+ * impossible to accurately determine the horizontal sync pulse
+ * timing actually seen by the panel.
+ *
+ * Note that this hardware bug does not affect the CRT output.
+ */
+ if (((pATIHW->crtc_h_sync_strt_wid ^
+ pATIHW->shadow_h_sync_strt_wid) &
+ (CRTC_H_SYNC_STRT | CRTC_H_SYNC_STRT_HI |
+ CRTC_H_SYNC_WID)))
+ {
+ xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_NOTICE, 0,
+ "Invalid horizontal sync pulse timing detected in mode"
+ " on server entry.\n");
+
+ /* Don't trust input timing */
+ pATI->OptionLCDSync = TRUE;
+ ModeType = 0;
+ }
+
+ /* Merge in shadow registers as appropriate */
+ if (pATIHW->lcd_gen_ctrl & SHADOW_EN)
+ {
+ /* XXX What about the LT? */
+ if ((pATI->Chip < ATI_CHIP_264LTPRO) ||
+ !(pATIHW->config_panel & DONT_SHADOW_HEND))
+ {
+ pATIHW->crtc_h_total_disp &= ~CRTC_H_DISP;
+ pATIHW->crtc_h_total_disp |=
+ pATIHW->shadow_h_total_disp & CRTC_H_DISP;
+ }
+
+ pATIHW->crtc_h_total_disp &= ~CRTC_H_TOTAL;
+ pATIHW->crtc_h_total_disp |=
+ pATIHW->shadow_h_total_disp & CRTC_H_TOTAL;
+ pATIHW->crtc_h_sync_strt_wid =
+ pATIHW->shadow_h_sync_strt_wid;
+
+ if (pATIHW->lcd_gen_ctrl & USE_SHADOWED_VEND)
+ {
+ pATIHW->crtc_v_total_disp &= ~CRTC_V_DISP;
+ pATIHW->crtc_v_total_disp |=
+ pATIHW->shadow_v_total_disp & CRTC_V_DISP;
+ }
+
+ if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR))
+ {
+ pATIHW->crtc_v_total_disp &= ~CRTC_V_TOTAL;
+ pATIHW->crtc_v_total_disp |=
+ pATIHW->shadow_v_total_disp & CRTC_V_TOTAL;
+ }
+ }
+
+ if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR))
+ pATIHW->crtc_v_sync_strt_wid =
+ pATIHW->shadow_v_sync_strt_wid;
+
+ /* Decipher input timing */
HDisplay = GetBits(pATIHW->crtc_h_total_disp, CRTC_H_DISP) +
GetBits(pATIHW->ovr_wid_left_right, OVR_WID_LEFT) +
GetBits(pATIHW->ovr_wid_left_right, OVR_WID_RIGHT);
@@ -1702,6 +2051,19 @@ ATIPreInit
VDisplay++;
}
+ /* Restore LCD registers */
+ if (pATI->Chip == ATI_CHIP_264LT)
+ {
+ outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl);
+ }
+ else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) ||
+ (pATI->Chip == ATI_CHIP_264XL) ||
+ (pATI->Chip == ATI_CHIP_MOBILITY)) */
+ {
+ ATIMach64PutLCDReg(LCD_GEN_CNTL, pATIHW->lcd_gen_ctrl);
+ outr(LCD_INDEX, pATIHW->lcd_index);
+ }
+
HDisplay <<= 3;
pATI->LCDHSyncStart <<= 3;
pATI->LCDHSyncWidth <<= 3;
@@ -1810,7 +2172,7 @@ ATIPreInit
(HORZ_STRETCH_EN | AUTO_HORZ_RATIO))
pATI->LCDHorizontal = HDisplay;
}
- else if (pATI->LCDHorizontal != HDisplay)
+ else if (pATI->LCDHorizontal != (int)HDisplay)
{
if ((pATIHW->horz_stretching &
(HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) !=
@@ -1827,7 +2189,7 @@ ATIPreInit
!(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO))
pATI->LCDVertical = VDisplay;
}
- else if (pATI->LCDVertical != VDisplay)
+ else if (pATI->LCDVertical != (int)VDisplay)
{
if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) ||
!(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO))
@@ -1857,8 +2219,9 @@ ATIPreInit
if (!(pATIHW->horz_stretching & HORZ_STRETCH_EN) &&
((HDisplay = pATI->LCDHorizontal - HDisplay) > 0))
{
- pATI->LCDHSyncStart -= HDisplay;
- if (pATI->LCDHSyncStart < 0)
+ if (pATI->LCDHSyncStart >= HDisplay)
+ pATI->LCDHSyncStart -= HDisplay;
+ else
pATI->LCDHSyncStart = 0;
pATI->LCDHBlankWidth -= HDisplay;
HDisplay = pATI->LCDHSyncStart + pATI->LCDHSyncWidth;
@@ -1869,8 +2232,9 @@ ATIPreInit
if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) &&
((VDisplay = pATI->LCDVertical - VDisplay) > 0))
{
- pATI->LCDVSyncStart -= VDisplay;
- if (pATI->LCDVSyncStart < 0)
+ if (pATI->LCDVSyncStart >= VDisplay)
+ pATI->LCDVSyncStart -= VDisplay;
+ else
pATI->LCDVSyncStart = 0;
pATI->LCDVBlankWidth -= VDisplay;
VDisplay = pATI->LCDVSyncStart + pATI->LCDVSyncWidth;
@@ -1911,12 +2275,12 @@ ATIPreInit
*/
ClockMask = PLL_VCLK0_XDIV << pATIHW->clock;
PostMask = PLL_VCLK0_POST_DIV << (pATIHW->clock * 2);
- i = GetBits(ATIGetMach64PLLReg(PLL_XCLK_CNTL), ClockMask);
+ i = GetBits(ATIMach64GetPLLReg(PLL_XCLK_CNTL), ClockMask);
i *= MaxBits(PLL_VCLK0_POST_DIV) + 1;
- i |= GetBits(ATIGetMach64PLLReg(PLL_VCLK_POST_DIV), PostMask);
+ i |= GetBits(ATIMach64GetPLLReg(PLL_VCLK_POST_DIV), PostMask);
/* Calculate clock of mode on entry */
- Numerator = ATIGetMach64PLLReg(PLL_VCLK0_FB_DIV + pATIHW->clock) *
+ Numerator = ATIMach64GetPLLReg(PLL_VCLK0_FB_DIV + pATIHW->clock) *
pATI->ReferenceNumerator;
Denominator = pATI->ClockDescriptor.MinM *
pATI->ReferenceDenominator *
@@ -2060,14 +2424,17 @@ ATIPreInit
else
IOValue = ~((CARD32)((1 << 22) - 1));
- if ((IOValue &= pGDev->MemBase) &&
- (IOValue <= (MaxBits(CFG_MEM_AP_LOC) << 22)))
+ IOValue &= pGDev->MemBase;
+ if (IOValue &&
+ (IOValue <= (CARD32)(MaxBits(CFG_MEM_AP_LOC) << 22)))
pATI->LinearBase = IOValue;
if (!pATI->LinearBase)
+ {
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Linear aperture not configured. Specify \"MemBase\""
" override in XF86Config \"Device\" section.\n");
+ }
else
{
if (!pATI->LinearSize)
@@ -2088,7 +2455,7 @@ ATIPreInit
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Unable to register %d MB linear aperture at"
- " 0x%08X.\n", pATI->LinearSize >> 10,
+ " 0x%08lX.\n", pATI->LinearSize >> 10,
pATI->LinearBase);
pATI->LinearSize = 0;
@@ -2108,7 +2475,7 @@ ATIPreInit
{
pATI->Block0Base =
pATI->LinearBase + pATI->LinearSize - 0x00000400U;
- pATI->MMIOInLinear = pATI->OptionAccel;
+ pATI->MMIOInLinear = TRUE;
}
AcceleratorVideoRAM = pATI->LinearSize >> 10;
@@ -2137,7 +2504,7 @@ ATIPreInit
pATI->CursorBase = pATI->LinearBase + pATI->CursorOffset;
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
- "Storing hardware cursor image at 0x%08X.\n",
+ "Storing hardware cursor image at 0x%08lX.\n",
pATI->CursorBase);
}
@@ -2192,7 +2559,7 @@ ATIPreInit
(AcceleratorVideoRAM + PageSize) & ~PageSize;
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
- "Using %d MB linear aperture at 0x%08X.\n",
+ "Using %d MB linear aperture at 0x%08lX.\n",
pATI->LinearSize >> 20, pATI->LinearBase);
/* Only mmap what is needed */
@@ -2282,28 +2649,17 @@ ATIPreInit
}
-#ifndef AVOID_CPIO
-
- if (!pATI->OptionAccel)
- {
- pATI->Block0Base = 0; /* Not needed */
- pATI->MMIOInLinear = FALSE;
- }
- else
-
-#endif
-
if (pATI->Block0Base)
{
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
- "Using Block 0 MMIO aperture at 0x%08X.\n", pATI->Block0Base);
+ "Using Block 0 MMIO aperture at 0x%08lX.\n", pATI->Block0Base);
/* Set Block1 MMIO address if supported */
if (pATI->Chip >= ATI_CHIP_264VT)
{
pATI->Block1Base = pATI->Block0Base - 0x00000400U;
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
- "Using Block 1 MMIO aperture at 0x%08X.\n",
+ "Using Block 1 MMIO aperture at 0x%08lX.\n",
pATI->Block1Base);
}
}
@@ -2352,23 +2708,20 @@ ATIPreInit
"Linear aperture not supported in this configuration.\n");
pATI->OptionLinear = FALSE;
}
- else
+ else if (pATI->VGAAdapter != ATI_ADAPTER_NONE)
{
- if (pATI->VGAAdapter != ATI_ADAPTER_NONE)
+ /*
+ * Free VGA memory aperture during operating state (but it is still
+ * decoded).
+ */
+ pResources = xf86SetOperatingState(resVgaMem, pATI->iEntity,
+ ResUnusedOpr);
+ if (pResources)
{
- /*
- * Free VGA memory aperture during operating state (but it is
- * still decoded).
- */
- pResources = xf86SetOperatingState(resVgaMem,
- pATI->iEntity, ResUnusedOpr);
- if (pResources)
- {
- xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
- "Logic error setting operating state for VGA memory"
- " aperture.\n");
- xf86FreeResList(pResources);
- }
+ xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
+ "Logic error setting operating state for VGA memory"
+ " aperture.\n");
+ xf86FreeResList(pResources);
}
}
}
@@ -2437,10 +2790,14 @@ ATIPreInit
#ifndef AVOID_CPIO
else if (pATI->Adapter >= ATI_ADAPTER_V3)
+ {
ATIReportMemory(pScreenInfo, pATI,
(ATIGetExtReg(0xB7U) & 0x04U) ? "DRAM" : "VRAM");
+ }
else
+ {
ATIReportMemory(pScreenInfo, pATI, "video memory");
+ }
#endif /* AVOID_CPIO */
@@ -2480,7 +2837,9 @@ ATIPreInit
#endif
if ((pATI->Chip >= ATI_CHIP_88800GXC) &&
(pATI->LockData.crtc_gen_cntl & CRTC_EXT_DISP_EN))
+ {
pATIHW->crtc = ATI_CRTC_MACH64;
+ }
if (pATI->depth <= 4)
{
@@ -2510,7 +2869,9 @@ ATIPreInit
pATIHW->nBank = pATI->NewHW.nBank = 1;
}
else if (!pATI->UseSmallApertures)
+ {
pATIHW->SetBank = pATI->NewHW.SetBank;
+ }
else if ((pATIHW->crtc == ATI_CRTC_VGA) &&
!(pATI->LockData.config_cntl & CFG_MEM_VGA_AP_EN))
{
@@ -2518,9 +2879,13 @@ ATIPreInit
pATIHW->nBank = 1;
}
else if (pATIHW->nPlane == 1)
+ {
pATIHW->SetBank = ATIMach64SetBankPacked;
+ }
else
+ {
pATIHW->SetBank = ATIMach64SetBankPlanar;
+ }
if (((ApertureSize * pATI->depth) / pATI->BankInfo.nBankDepth) >=
(unsigned)(pScreenInfo->videoRam * 1024))
@@ -2558,8 +2923,10 @@ ATIPreInit
pATI->OptionShadowFB = FALSE;
}
else
+ {
xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO,
"Using shadow frame buffer.\n");
+ }
}
/* 264VT-B's and later have DSP registers */
@@ -2704,12 +3071,16 @@ ATIPreInit
#ifndef AVOID_CPIO
if (pATI->NewHW.crtc == ATI_CRTC_VGA)
+ {
DefaultmaxClock = 100000;
+ }
else
#endif /* AVOID_CPIO */
+ {
DefaultmaxClock = 220000;
+ }
break;
default:
@@ -2723,12 +3094,16 @@ ATIPreInit
*/
if ((pATI->Chip == ATI_CHIP_18800) ||
(pATI->Chip == ATI_CHIP_18800_1))
+ {
DefaultmaxClock = 40000;
+ }
else if (pATI->CPIO_VGAWonder &&
(pATI->VideoRAM < 1024) &&
(pATI->depth >= 8))
+ {
DefaultmaxClock =
(GetBits(BIOSByte(0x44U), 0x04U) * 5000) + 40000;
+ }
else
#endif /* AVOID_CPIO */
@@ -2767,12 +3142,16 @@ ATIPreInit
#ifdef AVOID_CPIO
if (pATI->Chip >= ATI_CHIP_264CT)
+ {
minPitch = 8;
+ }
#else /* AVOID_CPIO */
if ((pATI->depth >= 8) && (pATI->Chip >= ATI_CHIP_264CT))
+ {
minPitch = 8;
+ }
else if (pATI->CPIO_VGAWonder &&
(pATI->Chip <= ATI_CHIP_18800_1) &&
(pATI->VideoRAM == 256) &&
@@ -2785,7 +3164,9 @@ ATIPreInit
#endif /* AVOID_CPIO */
else
+ {
minPitch = 16;
+ }
pATI->pitchInc = minPitch;
@@ -2896,7 +3277,8 @@ ATIPreInit
pATI->pitchInc = pATI->XModifier * (64 * 8);
}
- if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0))
+ if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0) &&
+ (ModeType == M_T_BUILTIN))
{
/*
* Given LCD modes are more tightly controlled than CRT modes, allow
@@ -2942,7 +3324,9 @@ ATIPreInit
pMode->CrtcVTotal = pMode->VTotal;
if (!pScreenInfo->monitor->Modes)
+ {
pScreenInfo->monitor->Modes = pMode;
+ }
else
{
pScreenInfo->monitor->Last->next = pMode;
@@ -3072,13 +3456,19 @@ ATIPreInit
else if ((pMode->HDisplay & ~pATI->AdjustMask) / pScreenInfo->xInc)
xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
"Mode \"%s\" cannot scroll to bottom right corner of virtual"
- " resolution.\n Horizontal dimension not a multiple of %d.\n",
+ " resolution.\n Horizontal dimension not a multiple of %ld.\n",
pMode->name, ~pATI->AdjustMask + 1);
} while ((pMode = pMode->next) != pScreenInfo->modes);
+ /* Initialise XVideo extension support */
+ ATIXVPreInit(pATI);
+
/* Initialise CRTC code */
ATIModePreInit(pScreenInfo, pATI, &pATI->NewHW);
+ /* Set up for I2C */
+ ATII2CPreInit(pScreenInfo, pATI);
+
if (!pScreenInfo->chipset || !*pScreenInfo->chipset)
pScreenInfo->chipset = (char *)ATIChipsetNames[0];
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 10:10:26 +0000