1 files changed, 132 insertions, 0 deletions
diff --git a/src/i2c_vid.h b/src/i2c_vid.h
new file mode 100644
index 00000000..2ba88298
--- /dev/null
+++ b/src/i2c_vid.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright © 2006 Eric Anholt
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef I2C_VID_H
+#define I2C_VID_H
+#include <randrstr.h>
+#include "xf86Crtc.h"
+
+typedef struct _XF86I2CVidOutputRec {
+    /**
+     * Initialize the device at startup time.
+     * Returns NULL if the device does not exist.
+     */
+    void *(*init)(I2CBusPtr b, I2CSlaveAddr addr);
+
+    /**
+     * Called to allow the output a chance to create properties after the
+     * RandR objects have been created.
+     */
+    void
+    (*create_resources)(I2CDevPtr d);
+
+    /**
+     * Turns the output on/off, or sets intermediate power levels if available.
+     *
+     * Unsupported intermediate modes drop to the lower power setting.  If the
+     * mode is DPMSModeOff, the output must be disabled, as the DPLL may be
+     * disabled afterwards.
+     */
+    void (*dpms)(I2CDevPtr d, int mode);
+    
+    /**
+     * Saves the output's state for restoration on VT switch.
+     */
+    void (*save)(I2CDevPtr d);
+
+    /**
+     * Restore's the output's state at VT switch.
+     */
+    void (*restore)(I2CDevPtr d);
+
+    /**
+     * Callback for testing a video mode for a given output.
+     *
+     * This function should only check for cases where a mode can't be supported
+     * on the output specifically, and not represent generic CRTC limitations.
+     *
+     * \return MODE_OK if the mode is valid, or another MODE_* otherwise.
+     */
+    int (*mode_valid)(I2CDevPtr d, DisplayModePtr mode);
+
+    /**
+     * Callback to adjust the mode to be set in the CRTC.
+     *
+     * This allows an output to adjust the clock or even the entire set of
+     * timings, which is used for panels with fixed timings or for
+     * buses with clock limitations.
+     */
+    Bool (*mode_fixup)(I2CDevPtr d, DisplayModePtr mode, DisplayModePtr adjusted_mode);
+
+    /**
+     * Callback for preparing mode changes on an output
+     */
+    void (*prepare)(I2CDevPtr d);
+
+    /**
+     * Callback for committing mode changes on an output
+     */
+    void (*commit)(I2CDevPtr d);
+    
+    /**
+     * Callback for setting up a video mode after fixups have been made.
+     *
+     * This is only called while the output is disabled.  The dpms callback
+     * must be all that's necessary for the output, to turn the output on
+     * after this function is called.
+     */
+    void (*mode_set)(I2CDevPtr d, DisplayModePtr mode, DisplayModePtr adjusted_mode);
+    
+    /**
+     * Probe for a connected output, and return detect_status.
+     */
+    xf86OutputStatus (*detect)(I2CDevPtr d);
+
+    /**
+     * Query the device for the modes it provides.
+     *
+     * This function may also update MonInfo, mm_width, and mm_height.
+     *
+     * \return singly-linked list of modes or NULL if no modes found.
+     */
+    DisplayModePtr
+    (*get_modes)(I2CDevPtr d);
+    
+    /**
+     * Callback when an output's property has changed.
+     */
+    Bool
+    (*set_property)(I2CDevPtr d, Atom property, RRPropertyValuePtr value);
+
+    /**
+     * Clean up driver-specific bits of the output
+     */
+    void (*destroy) (I2CDevPtr d);
+
+    /**
+     * Debugging hook to dump device registers to log file
+     */
+    void (*dump_regs)(I2CDevPtr d);
+} XF86I2CVidOutputRec, *XF86I2CVidOutputPtr;
+
+
+#endif