diff options
Diffstat (limited to 'src/radeon_driver.c')
-rw-r--r-- | src/radeon_driver.c | 198 |
1 files changed, 106 insertions, 92 deletions
diff --git a/src/radeon_driver.c b/src/radeon_driver.c index 71ed7f10..d6a635e6 100644 --- a/src/radeon_driver.c +++ b/src/radeon_driver.c @@ -1,5 +1,5 @@ /* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_driver.c,v 1.117 2004/02/19 22:38:12 tsi Exp $ */ -/* $XdotOrg: driver/xf86-video-ati/src/radeon_driver.c,v 1.92.2.4 2006/03/12 05:03:22 benh Exp $ */ +/* $XdotOrg: driver/xf86-video-ati/src/radeon_driver.c,v 1.92.2.5 2006/03/12 06:57:12 benh Exp $ */ /* * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and * VA Linux Systems Inc., Fremont, California. @@ -2465,23 +2465,121 @@ static CARD32 RADEONGetAccessibleVRAM(ScrnInfoPtr pScrn) return aper_size; } +static Bool RADEONPreInitVRAM(ScrnInfoPtr pScrn) +{ + RADEONInfoPtr info = RADEONPTR(pScrn); + EntityInfoPtr pEnt = info->pEnt; + GDevPtr dev = pEnt->device; + unsigned char *RADEONMMIO = info->MMIO; + MessageType from = X_PROBED; + + if (info->FBDev) + pScrn->videoRam = fbdevHWGetVidmem(pScrn) / 1024; + else if ((info->ChipFamily == CHIP_FAMILY_RS100) || + (info->ChipFamily == CHIP_FAMILY_RS200) || + (info->ChipFamily == CHIP_FAMILY_RS300)) { + CARD32 tom = INREG(RADEON_NB_TOM); + + pScrn->videoRam = (((tom >> 16) - + (tom & 0xffff) + 1) << 6); + + OUTREG(RADEON_CONFIG_MEMSIZE, pScrn->videoRam * 1024); + } else { + CARD32 accessible; + CARD32 bar_size; + + /* Read VRAM size from card */ + pScrn->videoRam = INREG(RADEON_CONFIG_MEMSIZE) / 1024; + + /* Some production boards of m6 will return 0 if it's 8 MB */ + if (pScrn->videoRam == 0) { + pScrn->videoRam = 8192; + OUTREG(RADEON_CONFIG_MEMSIZE, 0x800000); + } + + /* Get accessible memory */ + accessible = RADEONGetAccessibleVRAM(pScrn); + + /* Crop it to the size of the PCI BAR */ + bar_size = (1ul << info->PciInfo->size[0]) / 1024; + if (bar_size == 0) + bar_size = 0x20000; + if (accessible > bar_size) + accessible = bar_size; + + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Detected total video RAM=%dK, accessible=%dK " + "(PCI BAR=%dK)\n", + pScrn->videoRam, accessible, bar_size); + if (pScrn->videoRam > accessible) + pScrn->videoRam = accessible; + } + + info->MemCntl = INREG(RADEON_SDRAM_MODE_REG); + info->BusCntl = INREG(RADEON_BUS_CNTL); + + RADEONGetVRamType(pScrn); + + if (dev->videoRam) { + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Video RAM override, using %d kB instead of %d kB\n", + dev->videoRam, + pScrn->videoRam); + from = X_CONFIG; + pScrn->videoRam = dev->videoRam; + } + + xf86DrvMsg(pScrn->scrnIndex, from, + "Mapped VideoRAM: %d kByte (%d bit %s SDRAM)\n", pScrn->videoRam, info->RamWidth, info->IsDDR?"DDR":"SDR"); + + /* FIXME: For now, split FB into two equal sections. This should + * be able to be adjusted by user with a config option. */ + if (info->IsPrimary) { + pScrn->videoRam /= 2; + info->MergedFB = FALSE; + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Using %dk of videoram for primary head\n", + pScrn->videoRam); + } + + if (info->IsSecondary) { + pScrn->videoRam /= 2; + info->LinearAddr += pScrn->videoRam * 1024; + xf86DrvMsg(pScrn->scrnIndex, X_INFO, + "Using %dk of videoram for secondary head\n", + pScrn->videoRam); + } + + pScrn->videoRam &= ~1023; + info->FbMapSize = pScrn->videoRam * 1024; + + /* if the card is PCI Express reserve the last 32k for the gart table */ +#ifdef XF86DRI + if (info->cardType == CARD_PCIE && info->directRenderingEnabled) + info->FbSecureSize = RADEON_PCIGART_TABLE_SIZE; + else +#endif + info->FbSecureSize = 0; +} + + /* This is called by RADEONPreInit to handle config file overrides for * things like chipset and memory regions. Also determine memory size * and type. If memory type ever needs an override, put it in this * routine. */ -static Bool RADEONPreInitConfig(ScrnInfoPtr pScrn) +static Bool RADEONPreInitChipType(ScrnInfoPtr pScrn) { RADEONInfoPtr info = RADEONPTR(pScrn); EntityInfoPtr pEnt = info->pEnt; GDevPtr dev = pEnt->device; - MessageType from; unsigned char *RADEONMMIO = info->MMIO; + MessageType from = X_PROBED; #ifdef XF86DRI const char *s; #endif - /* Chipset */ + /* Chipset */ from = X_PROBED; if (dev->chipset && *dev->chipset) { info->Chipset = xf86StringToToken(RADEONChipsets, dev->chipset); @@ -2757,7 +2855,6 @@ static Bool RADEONPreInitConfig(ScrnInfoPtr pScrn) info->HasCRTC2 = FALSE; } - /* Framebuffer */ from = X_PROBED; info->LinearAddr = info->PciInfo->memBase[0] & 0xfe000000; @@ -2794,49 +2891,6 @@ static Bool RADEONPreInitConfig(ScrnInfoPtr pScrn) } /* Read registers used to determine options */ - from = X_PROBED; - if (info->FBDev) - pScrn->videoRam = fbdevHWGetVidmem(pScrn) / 1024; - else if ((info->ChipFamily == CHIP_FAMILY_RS100) || - (info->ChipFamily == CHIP_FAMILY_RS200) || - (info->ChipFamily == CHIP_FAMILY_RS300)) { - CARD32 tom = INREG(RADEON_NB_TOM); - - pScrn->videoRam = (((tom >> 16) - - (tom & 0xffff) + 1) << 6); - - OUTREG(RADEON_CONFIG_MEMSIZE, pScrn->videoRam * 1024); - } else { - CARD32 accessible; - CARD32 bar_size; - - /* Read VRAM size from card */ - pScrn->videoRam = INREG(RADEON_CONFIG_MEMSIZE) / 1024; - - /* Some production boards of m6 will return 0 if it's 8 MB */ - if (pScrn->videoRam == 0) { - pScrn->videoRam = 8192; - OUTREG(RADEON_CONFIG_MEMSIZE, 0x800000); - } - - /* Get accessible memory */ - accessible = RADEONGetAccessibleVRAM(pScrn); - - /* Crop it to the size of the PCI BAR */ - bar_size = (1ul << info->PciInfo->size[0]) / 1024; - if (bar_size == 0) - bar_size = 0x20000; - if (accessible > bar_size) - accessible = bar_size; - - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Detected total video RAM=%dK, accessible=%dK " - "(PCI BAR=%dK)\n", - pScrn->videoRam, accessible, bar_size); - if (pScrn->videoRam > accessible) - pScrn->videoRam = accessible; - } - /* Check chip errata */ info->ChipErrata = 0; @@ -2854,45 +2908,6 @@ static Bool RADEONPreInitConfig(ScrnInfoPtr pScrn) info->ChipFamily == CHIP_FAMILY_RS200) info->ChipErrata |= CHIP_ERRATA_PLL_DELAY; - info->MemCntl = INREG(RADEON_SDRAM_MODE_REG); - info->BusCntl = INREG(RADEON_BUS_CNTL); - - RADEONGetVRamType(pScrn); - - if (dev->videoRam) { - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Video RAM override, using %d kB instead of %d kB\n", - dev->videoRam, - pScrn->videoRam); - from = X_CONFIG; - pScrn->videoRam = dev->videoRam; - } - - xf86DrvMsg(pScrn->scrnIndex, from, - "Mapped VideoRAM: %d kByte (%d bit %s SDRAM)\n", pScrn->videoRam, info->RamWidth, info->IsDDR?"DDR":"SDR"); - - /* FIXME: For now, split FB into two equal sections. This should - * be able to be adjusted by user with a config option. */ - if (info->IsPrimary) { - pScrn->videoRam /= 2; - info->MergedFB = FALSE; - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Using %dk of videoram for primary head\n", - pScrn->videoRam); - } - - if (info->IsSecondary) { - pScrn->videoRam /= 2; - info->LinearAddr += pScrn->videoRam * 1024; - xf86DrvMsg(pScrn->scrnIndex, X_INFO, - "Using %dk of videoram for secondary head\n", - pScrn->videoRam); - } - - pScrn->videoRam &= ~1023; - info->FbMapSize = pScrn->videoRam * 1024; - info->FbSecureSize = 0; - #ifdef XF86DRI /* AGP/PCI */ /* Proper autodetection of an AGP capable device requires examining @@ -2976,10 +2991,6 @@ static Bool RADEONPreInitConfig(ScrnInfoPtr pScrn) "Invalid BusType option, using detected type\n"); } } - - /* if the card is PCI Express reserve the last 32k for the gart table */ - if (info->cardType == CARD_PCIE) - info->FbSecureSize = RADEON_PCIGART_TABLE_SIZE; #endif xf86GetOptValBool(info->Options, OPTION_SHOWCACHE, &info->showCache); if (info->showCache) @@ -5059,6 +5070,9 @@ _X_EXPORT Bool RADEONPreInit(ScrnInfoPtr pScrn, int flags) RADEONPostInt10Check(pScrn, int10_save); + if (!RADEONPreInitChipType(pScrn)) + goto fail; + #ifdef XF86DRI /* PreInit DRI first of all since we need that for getting a proper * memory map @@ -5066,7 +5080,7 @@ _X_EXPORT Bool RADEONPreInit(ScrnInfoPtr pScrn, int flags) info->directRenderingEnabled = RADEONPreInitDRI(pScrn); #endif - if (!RADEONPreInitConfig(pScrn)) + if (!RADEONPreInitVRAM(pScrn)) goto fail; RADEONPreInitColorTiling(pScrn); |