summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/r128.h44
-rw-r--r--src/r128_accel.c62
-rw-r--r--src/r128_cursor.c67
-rw-r--r--src/r128_driver.c1038
-rw-r--r--src/r128_probe.c50
-rw-r--r--src/r128_probe.h15
-rw-r--r--src/r128_reg.h65
7 files changed, 1204 insertions, 137 deletions
diff --git a/src/r128.h b/src/r128.h
index 38d15c8b..eced5c7f 100644
--- a/src/r128.h
+++ b/src/r128.h
@@ -53,6 +53,8 @@
/* Xv support */
#include "xf86xv.h"
+#include "r128_probe.h"
+
/* DRI support */
#ifdef XF86DRI
#define _XF86DRI_SERVER_
@@ -135,6 +137,13 @@ typedef struct {
/* CRTC2 registers */
CARD32 crtc2_gen_cntl;
+ CARD32 crtc2_h_total_disp;
+ CARD32 crtc2_h_sync_strt_wid;
+ CARD32 crtc2_v_total_disp;
+ CARD32 crtc2_v_sync_strt_wid;
+ CARD32 crtc2_offset;
+ CARD32 crtc2_offset_cntl;
+ CARD32 crtc2_pitch;
/* Flat panel registers */
CARD32 fp_crtc_h_total_disp;
@@ -160,13 +169,29 @@ typedef struct {
CARD32 ppll_div_3;
CARD32 htotal_cntl;
+ /* Computed values for PLL2 */
+ CARD32 dot_clock_freq_2;
+ CARD32 pll_output_freq_2;
+ int feedback_div_2;
+ int post_div_2;
+
+ /* PLL2 registers */
+ CARD32 p2pll_ref_div;
+ CARD32 p2pll_div_0;
+ CARD32 htotal_cntl2;
+
/* DDA register */
CARD32 dda_config;
CARD32 dda_on_off;
+ /* DDA2 register */
+ CARD32 dda2_config;
+ CARD32 dda2_on_off;
+
/* Pallet */
Bool palette_valid;
CARD32 palette[256];
+ CARD32 palette2[256];
} R128SaveRec, *R128SavePtr;
typedef struct {
@@ -186,6 +211,16 @@ typedef struct {
DisplayModePtr mode;
} R128FBLayout;
+typedef enum
+{
+ MT_NONE,
+ MT_CRT,
+ MT_LCD,
+ MT_DFP,
+ MT_CTV,
+ MT_STV
+} R128MonitorType;
+
typedef struct {
EntityInfoPtr pEnt;
pciVideoPtr PciInfo;
@@ -403,6 +438,14 @@ typedef struct {
Bool VGAAccess;
+ /****** Added for dualhead support *******************/
+ BOOL HasCRTC2; /* M3/M4 */
+ BOOL IsSecondary; /* second Screen */
+ BOOL IsPrimary; /* primary Screen */
+ BOOL UseCRT; /* force use CRT port as primary */
+ BOOL SwitchingMode;
+ R128MonitorType DisplayType; /* Monitor connected on*/
+
} R128InfoRec, *R128InfoPtr;
#define R128WaitForFifo(pScrn, entries) \
@@ -411,6 +454,7 @@ do { \
info->fifo_slots -= entries; \
} while (0)
+extern R128EntPtr R128EntPriv(ScrnInfoPtr pScrn);
extern void R128WaitForFifoFunction(ScrnInfoPtr pScrn, int entries);
extern void R128WaitForIdle(ScrnInfoPtr pScrn);
extern void R128EngineReset(ScrnInfoPtr pScrn);
diff --git a/src/r128_accel.c b/src/r128_accel.c
index ded73d5a..08654bc0 100644
--- a/src/r128_accel.c
+++ b/src/r128_accel.c
@@ -82,6 +82,7 @@
/* Driver data structures */
#include "r128.h"
#include "r128_reg.h"
+#include "r128_probe.h"
#ifdef XF86DRI
#include "r128_sarea.h"
#define _XF86DRI_SERVER_
@@ -117,6 +118,8 @@ static struct {
{ R128_ROP3_ONE, R128_ROP3_ONE } /* GXset */
};
+extern int gR128EntityIndex;
+
/* Flush all dirty data in the Pixel Cache to memory. */
void R128EngineFlush(ScrnInfoPtr pScrn)
{
@@ -1023,7 +1026,7 @@ void R128EngineInit(ScrnInfoPtr pScrn)
R128TRACE(("Pitch for acceleration = %d\n", info->pitch));
R128WaitForFifo(pScrn, 2);
- OUTREG(R128_DEFAULT_OFFSET, 0);
+ OUTREG(R128_DEFAULT_OFFSET, pScrn->fbOffset);
OUTREG(R128_DEFAULT_PITCH, info->pitch);
R128WaitForFifo(pScrn, 4);
@@ -1647,6 +1650,25 @@ void R128CCEReleaseIndirect( ScrnInfoPtr pScrn )
&indirect, sizeof(drmR128Indirect));
}
+/* This callback is required for multihead cards using XAA */
+static
+void R128RestoreCCEAccelState(ScrnInfoPtr pScrn)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+/* unsigned char *R128MMIO = info->MMIO; needed for OUTREG below */
+ /*xf86DrvMsg(pScrn->scrnIndex, X_INFO, "===>RestoreCP\n");*/
+
+ R128WaitForFifo(pScrn, 1);
+/* is this needed on r128
+ OUTREG( R128_DEFAULT_OFFSET, info->frontPitchOffset);
+*/
+ R128WaitForIdle(pScrn);
+
+ /* FIXME: May need to restore other things,
+ like BKGD_CLK FG_CLK...*/
+
+}
+
static void R128CCEAccelInit(ScrnInfoPtr pScrn, XAAInfoRecPtr a)
{
R128InfoPtr info = R128PTR(pScrn);
@@ -1707,9 +1729,31 @@ static void R128CCEAccelInit(ScrnInfoPtr pScrn, XAAInfoRecPtr a)
| HARDWARE_PATTERN_PROGRAMMED_ORIGIN
| HARDWARE_PATTERN_SCREEN_ORIGIN
| BIT_ORDER_IN_BYTE_LSBFIRST);
+
+ if(!info->IsSecondary && xf86IsEntityShared(pScrn->entityList[0]))
+ a->RestoreAccelState = R128RestoreCCEAccelState;
+
}
#endif
+/* This callback is required for multihead cards using XAA */
+static
+void R128RestoreAccelState(ScrnInfoPtr pScrn)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+ unsigned char *R128MMIO = info->MMIO;
+
+ R128WaitForFifo(pScrn, 2);
+ OUTREG(R128_DEFAULT_OFFSET, pScrn->fbOffset);
+ OUTREG(R128_DEFAULT_PITCH, info->pitch);
+
+ /* FIXME: May need to restore other things,
+ like BKGD_CLK FG_CLK...*/
+
+ R128WaitForIdle(pScrn);
+
+}
+
static void R128MMIOAccelInit(ScrnInfoPtr pScrn, XAAInfoRecPtr a)
{
R128InfoPtr info = R128PTR(pScrn);
@@ -1788,6 +1832,22 @@ static void R128MMIOAccelInit(ScrnInfoPtr pScrn, XAAInfoRecPtr a)
| LEFT_EDGE_CLIPPING
| LEFT_EDGE_CLIPPING_NEGATIVE_X
| SCANLINE_PAD_DWORD;
+
+ if(xf86IsEntityShared(pScrn->entityList[0]))
+ {
+ DevUnion* pPriv;
+ R128EntPtr pR128Ent;
+ pPriv = xf86GetEntityPrivate(pScrn->entityList[0],
+ gR128EntityIndex);
+ pR128Ent = pPriv->ptr;
+
+ /*if there are more than one devices sharing this entity, we
+ have to assign this call back, otherwise the XAA will be
+ disabled */
+ if(pR128Ent->HasSecondary || pR128Ent->BypassSecondary)
+ a->RestoreAccelState = R128RestoreAccelState;
+ }
+
}
/* Initialize XAA for supported acceleration and also initialize the
diff --git a/src/r128_cursor.c b/src/r128_cursor.c
index 5a2ac4f0..41f8f2d1 100644
--- a/src/r128_cursor.c
+++ b/src/r128_cursor.c
@@ -1,4 +1,4 @@
-/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_cursor.c,v 1.6 2003/02/13 20:28:40 tsi Exp $ */
+/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_cursor.c,v 1.5tsi Exp $ */
/*
* Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario,
* Precision Insight, Inc., Cedar Park, Texas, and
@@ -72,8 +72,16 @@ static void R128SetCursorColors(ScrnInfoPtr pScrn, int bg, int fg)
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- OUTREG(R128_CUR_CLR0, bg);
- OUTREG(R128_CUR_CLR1, fg);
+ if(info->IsSecondary)
+ {
+ OUTREG(R128_CUR2_CLR0, bg);
+ OUTREG(R128_CUR2_CLR1, fg);
+ }
+ else
+ {
+ OUTREG(R128_CUR_CLR0, bg);
+ OUTREG(R128_CUR_CLR1, fg);
+ }
}
/* Set cursor position to (x,y) with offset into cursor bitmap at
@@ -94,11 +102,25 @@ static void R128SetCursorPosition(ScrnInfoPtr pScrn, int x, int y)
if (xorigin >= cursor->MaxWidth) xorigin = cursor->MaxWidth - 1;
if (yorigin >= cursor->MaxHeight) yorigin = cursor->MaxHeight - 1;
- OUTREG(R128_CUR_HORZ_VERT_OFF, R128_CUR_LOCK | (xorigin << 16) | yorigin);
- OUTREG(R128_CUR_HORZ_VERT_POSN, (R128_CUR_LOCK
+ if(!info->IsSecondary)
+ {
+ OUTREG(R128_CUR_HORZ_VERT_OFF, R128_CUR_LOCK | (xorigin << 16) | yorigin);
+ OUTREG(R128_CUR_HORZ_VERT_POSN, (R128_CUR_LOCK
| ((xorigin ? 0 : x) << 16)
| (yorigin ? 0 : y)));
- OUTREG(R128_CUR_OFFSET, info->cursor_start + yorigin * 16);
+ OUTREG(R128_CUR_OFFSET, info->cursor_start + yorigin * 16);
+ }
+ else
+ {
+ OUTREG(R128_CUR2_HORZ_VERT_OFF, (R128_CUR2_LOCK
+ | (xorigin << 16)
+ | yorigin));
+ OUTREG(R128_CUR2_HORZ_VERT_POSN, (R128_CUR2_LOCK
+ | ((xorigin ? 0 : x) << 16)
+ | (yorigin ? 0 : y)));
+ OUTREG(R128_CUR2_OFFSET,
+ info->cursor_start + pScrn->fbOffset + yorigin * 16);
+ }
}
/* Copy cursor image from `image' to video memory. R128SetCursorPosition
@@ -112,8 +134,16 @@ static void R128LoadCursorImage(ScrnInfoPtr pScrn, unsigned char *image)
int y;
CARD32 save;
- save = INREG(R128_CRTC_GEN_CNTL);
- OUTREG(R128_CRTC_GEN_CNTL, save & (CARD32)~R128_CRTC_CUR_EN);
+ if(!info->IsSecondary)
+ {
+ save = INREG(R128_CRTC_GEN_CNTL);
+ OUTREG(R128_CRTC_GEN_CNTL, save & (CARD32)~R128_CRTC_CUR_EN);
+ }
+ else
+ {
+ save = INREG(R128_CRTC2_GEN_CNTL);
+ OUTREG(R128_CRTC2_GEN_CNTL, save & (CARD32)~R128_CRTC2_CUR_EN);
+ }
#if X_BYTE_ORDER == X_BIG_ENDIAN
switch(info->CurrentLayout.pixel_bytes) {
@@ -169,7 +199,11 @@ static void R128LoadCursorImage(ScrnInfoPtr pScrn, unsigned char *image)
}
- OUTREG(R128_CRTC_GEN_CNTL, save);
+ if(!info->IsSecondary)
+ OUTREG(R128_CRTC_GEN_CNTL, save);
+ else
+ OUTREG(R128_CRTC2_GEN_CNTL, save);
+
}
/* Hide hardware cursor. */
@@ -178,7 +212,10 @@ static void R128HideCursor(ScrnInfoPtr pScrn)
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- OUTREGP(R128_CRTC_GEN_CNTL, 0, ~R128_CRTC_CUR_EN);
+ if(info->IsSecondary)
+ OUTREGP(R128_CRTC2_GEN_CNTL, 0, ~R128_CRTC2_CUR_EN);
+ else
+ OUTREGP(R128_CRTC_GEN_CNTL, 0, ~R128_CRTC_CUR_EN);
}
/* Show hardware cursor. */
@@ -187,7 +224,15 @@ static void R128ShowCursor(ScrnInfoPtr pScrn)
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- OUTREGP(R128_CRTC_GEN_CNTL, R128_CRTC_CUR_EN, ~R128_CRTC_CUR_EN);
+ if(info->IsSecondary)
+ {
+ OUTREGP(R128_CRTC2_GEN_CNTL, R128_CRTC2_CUR_EN,
+ ~R128_CRTC2_CUR_EN);
+ }
+ else
+ {
+ OUTREGP(R128_CRTC_GEN_CNTL, R128_CRTC_CUR_EN, ~R128_CRTC_CUR_EN);
+ }
}
/* Determine if hardware cursor is in use. */
diff --git a/src/r128_driver.c b/src/r128_driver.c
index 9dec22f0..61e59d8a 100644
--- a/src/r128_driver.c
+++ b/src/r128_driver.c
@@ -55,6 +55,8 @@
* overlay planes
*
* Modified by Marc Aurele La France <tsi@xfree86.org> for ATI driver merge.
+ *
+ * Dualhead support - Alex Deucher <agd5f@yahoo.com>
*/
@@ -355,6 +357,17 @@ void R128LoaderRefSymLists(void)
NULL);
}
+extern int gR128EntityIndex;
+
+R128EntPtr R128EntPriv(ScrnInfoPtr pScrn)
+{
+ DevUnion *pPriv;
+ R128InfoPtr info = R128PTR(pScrn);
+ pPriv = xf86GetEntityPrivate(info->pEnt->index,
+ gR128EntityIndex);
+ return pPriv->ptr;
+}
+
/* Allocate our private R128InfoRec. */
static Bool R128GetRec(ScrnInfoPtr pScrn)
{
@@ -463,7 +476,7 @@ unsigned R128INPLL(ScrnInfoPtr pScrn, int addr)
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- OUTREG8(R128_CLOCK_CNTL_INDEX, addr & 0x1f);
+ OUTREG8(R128_CLOCK_CNTL_INDEX, addr & 0x3f);
return INREG(R128_CLOCK_CNTL_DATA);
}
@@ -497,10 +510,30 @@ static void R128Blank(ScrnInfoPtr pScrn)
{
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- if(info->isDFP)
- OUTREGP(R128_FP_GEN_CNTL, R128_FP_BLANK_DIS, ~R128_FP_BLANK_DIS);
+
+ if(!info->IsSecondary)
+ {
+ switch(info->DisplayType)
+ {
+ case MT_LCD:
+ OUTREGP(R128_LVDS_GEN_CNTL, R128_LVDS_DISPLAY_DIS,
+ ~R128_LVDS_DISPLAY_DIS);
+ break;
+ case MT_CRT:
+ OUTREGP(R128_CRTC_EXT_CNTL, R128_CRTC_DISPLAY_DIS, ~R128_CRTC_DISPLAY_DIS);
+ break;
+ case MT_DFP:
+ OUTREGP(R128_FP_GEN_CNTL, R128_FP_BLANK_DIS, ~R128_FP_BLANK_DIS);
+ break;
+ case MT_NONE:
+ default:
+ break;
+ }
+ }
else
- OUTREGP(R128_CRTC_EXT_CNTL, R128_CRTC_DISPLAY_DIS, ~R128_CRTC_DISPLAY_DIS);
+ {
+ OUTREGP(R128_CRTC2_GEN_CNTL, R128_CRTC2_DISP_DIS, ~R128_CRTC2_DISP_DIS);
+ }
}
/* Unblank screen. */
@@ -509,12 +542,39 @@ static void R128Unblank(ScrnInfoPtr pScrn)
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- if(info->isDFP)
- OUTREGP(R128_FP_GEN_CNTL, 0, ~R128_FP_BLANK_DIS);
+ if(!info->IsSecondary)
+ {
+ switch(info->DisplayType)
+ {
+ case MT_LCD:
+ OUTREGP(R128_LVDS_GEN_CNTL, 0,
+ ~R128_LVDS_DISPLAY_DIS);
+ break;
+ case MT_CRT:
+ OUTREGP(R128_CRTC_EXT_CNTL, 0, ~R128_CRTC_DISPLAY_DIS);
+ break;
+ case MT_DFP:
+ OUTREGP(R128_FP_GEN_CNTL, 0, ~R128_FP_BLANK_DIS);
+ break;
+ case MT_NONE:
+ default:
+ break;
+ }
+ }
else
- OUTREGP(R128_CRTC_EXT_CNTL, 0, ~(R128_CRTC_DISPLAY_DIS |
- R128_CRTC_VSYNC_DIS |
- R128_CRTC_HSYNC_DIS));
+ {
+ switch(info->DisplayType)
+ {
+ case MT_LCD:
+ case MT_DFP:
+ case MT_CRT:
+ OUTREGP(R128_CRTC2_GEN_CNTL, 0, ~R128_CRTC2_DISP_DIS);
+ break;
+ case MT_NONE:
+ default:
+ break;
+ }
+ }
}
/* Compute log base 2 of val. */
@@ -577,7 +637,73 @@ static Bool R128GetBIOSParameters(ScrnInfoPtr pScrn, xf86Int10InfoPtr pInt10)
"Video BIOS not found!\n");
}
- if (info->VBIOS && info->HasPanelRegs) {
+ if(info->HasCRTC2)
+ {
+ if(info->IsSecondary)
+ {
+ /* there may be a way to detect this, for now, just assume
+ second head is CRT */
+ info->DisplayType = MT_CRT;
+
+ if(info->DisplayType > MT_NONE)
+ {
+ DevUnion* pPriv;
+ R128EntPtr pR128Ent;
+ pPriv = xf86GetEntityPrivate(pScrn->entityList[0],
+ gR128EntityIndex);
+ pR128Ent = pPriv->ptr;
+ pR128Ent->HasSecondary = TRUE;
+
+ }
+ else return FALSE;
+
+ }
+ else
+ {
+ /* really need some sort of detection here */
+ if (info->HasPanelRegs) {
+ info->DisplayType = MT_LCD;
+ } else if (info->isDFP) {
+ info->DisplayType = MT_DFP;
+ } else
+ {
+ /*DVI port has no monitor connected, try CRT port.
+ If something on CRT port, treat it as primary*/
+ if(xf86IsEntityShared(pScrn->entityList[0]))
+ {
+ DevUnion* pPriv;
+ R128EntPtr pR128Ent;
+ pPriv = xf86GetEntityPrivate(pScrn->entityList[0],
+ gR128EntityIndex);
+ pR128Ent = pPriv->ptr;
+ pR128Ent->BypassSecondary = TRUE;
+ }
+
+ info->DisplayType = MT_CRT;
+#if 0
+ {
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "No monitor detected!!!\n");
+ return FALSE;
+ }
+#endif
+ }
+ }
+ }
+ else
+ {
+ /*Regular Radeon ASIC, only one CRTC, but it could be
+ used for DFP with a DVI output, like AIW board*/
+ if(info->isDFP) info->DisplayType = MT_DFP;
+ else info->DisplayType = MT_CRT;
+ }
+
+ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "%s Display == Type %d\n",
+ (info->IsSecondary ? "Secondary" : "Primary"),
+ info->DisplayType);
+
+
+ if (info->VBIOS && info->DisplayType == MT_LCD) {
info->FPBIOSstart = 0;
/* FIXME: There should be direct access to the start of the FP info
@@ -925,6 +1051,7 @@ static Bool R128PreInitConfig(ScrnInfoPtr pScrn)
} else {
info->isDFP = FALSE;
info->isPro2 = FALSE;
+ info->HasCRTC2 = FALSE;
switch (info->Chipset) {
/* R128 Pro and Pro2 can have DFP, we will deal with it.
No support for dual-head/xinerama yet.
@@ -974,7 +1101,11 @@ static Bool R128PreInitConfig(ScrnInfoPtr pScrn)
case PCI_CHIP_RAGE128LE:
case PCI_CHIP_RAGE128LF:
case PCI_CHIP_RAGE128MF:
- case PCI_CHIP_RAGE128ML: info->HasPanelRegs = TRUE; break;
+ case PCI_CHIP_RAGE128ML:
+ info->HasPanelRegs = TRUE;
+ /* which chips support dualhead? */
+ info->HasCRTC2 = TRUE;
+ break;
case PCI_CHIP_RAGE128RE:
case PCI_CHIP_RAGE128RF:
case PCI_CHIP_RAGE128RG:
@@ -1022,6 +1153,8 @@ static Bool R128PreInitConfig(ScrnInfoPtr pScrn)
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"Option \"Display\" ignored "
"(framebuffer device determines display type)\n");
+ else if (info->IsPrimary || info->IsSecondary)
+ info->BIOSDisplay = R128_DUALHEAD;
else if (!Display || !xf86NameCmp(Display, "FP"))
info->BIOSDisplay = R128_BIOS_DISPLAY_FP;
else if (!xf86NameCmp(Display, "BIOS"))
@@ -1078,13 +1211,35 @@ static Bool R128PreInitConfig(ScrnInfoPtr pScrn)
from = X_CONFIG;
pScrn->videoRam = dev->videoRam;
}
- pScrn->videoRam &= ~1023;
- info->FbMapSize = pScrn->videoRam * 1024;
+
xf86DrvMsg(pScrn->scrnIndex, from,
"VideoRAM: %d kByte (%s)\n", pScrn->videoRam, info->ram->name);
+ if (info->IsPrimary) {
+ pScrn->videoRam /= 2;
+ xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "Using %dk of videoram for primary head\n",
+ pScrn->videoRam);
+ }
+
+ if (info->IsSecondary) {
+ pScrn->videoRam /= 2;
+ info->LinearAddr += pScrn->videoRam * 1024;
+ xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "Using %dk of videoram for secondary head\n",
+ pScrn->videoRam);
+ }
+
+ pScrn->videoRam &= ~1023;
+ info->FbMapSize = pScrn->videoRam * 1024;
+
+
/* Flat panel (part 2) */
switch (info->BIOSDisplay) {
+ case R128_DUALHEAD:
+ xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
+ "Dual display\n");
+ break;
case R128_BIOS_DISPLAY_FP:
xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
"Using flat panel for display\n");
@@ -1869,9 +2024,44 @@ Bool R128PreInit(ScrnInfoPtr pScrn, int flags)
info = R128PTR(pScrn);
+ info->IsSecondary = FALSE;
+ info->IsPrimary = FALSE;
+ info->SwitchingMode = FALSE;
+
info->pEnt = xf86GetEntityInfo(pScrn->entityList[0]);
if (info->pEnt->location.type != BUS_PCI) goto fail;
+ if(xf86IsEntityShared(pScrn->entityList[0]))
+ {
+ if(xf86IsPrimInitDone(pScrn->entityList[0]))
+ {
+ DevUnion* pPriv;
+ R128EntPtr pR128Ent;
+ info->IsSecondary = TRUE;
+ pPriv = xf86GetEntityPrivate(pScrn->entityList[0],
+ gR128EntityIndex);
+ pR128Ent = pPriv->ptr;
+ if(pR128Ent->BypassSecondary) return FALSE;
+ pR128Ent->pSecondaryScrn = pScrn;
+ }
+ else
+ {
+ DevUnion* pPriv;
+ R128EntPtr pR128Ent;
+ info->IsPrimary = TRUE;
+ xf86SetPrimInitDone(pScrn->entityList[0]);
+ pPriv = xf86GetEntityPrivate(pScrn->entityList[0],
+ gR128EntityIndex);
+ pR128Ent = pPriv->ptr;
+ pR128Ent->pPrimaryScrn = pScrn;
+ pR128Ent->IsDRIEnabled = FALSE;
+ pR128Ent->BypassSecondary = FALSE;
+ pR128Ent->HasSecondary = FALSE;
+ pR128Ent->RestorePrimary = FALSE;
+ pR128Ent->IsSecondaryRestored = FALSE;
+ }
+ }
+
if (flags & PROBE_DETECT) {
R128ProbeDDC(pScrn, info->pEnt->index);
return TRUE;
@@ -2030,12 +2220,20 @@ static void R128LoadPalette(ScrnInfoPtr pScrn, int numColors,
{
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- int i;
+ int i, j;
int idx;
unsigned char r, g, b;
+ /* If the second monitor is connected, we also
+ need to deal with the secondary palette*/
+ if (info->IsSecondary) j = 1;
+ else j = 0;
+
+ PAL_SELECT(j);
+
+
/* Select palette 0 (main CRTC) if using FP-enabled chip */
- if (info->HasPanelRegs || info->isDFP) PAL_SELECT(0);
+ /*if (info->HasPanelRegs || info->isDFP) PAL_SELECT(0);*/
if (info->CurrentLayout.depth == 15) {
/* 15bpp mode. This sends 32 values. */
@@ -2113,6 +2311,7 @@ Bool R128ScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
if (!R128MapMem(pScrn)) return FALSE;
pScrn->fbOffset = 0;
+ if(info->IsSecondary) pScrn->fbOffset = pScrn->videoRam * 1024;
#ifdef XF86DRI
info->fbX = 0;
info->fbY = 0;
@@ -2166,7 +2365,33 @@ Bool R128ScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
info->CurrentLayout.pixel_bytes * 3 + 1023) / 1024);
info->directRenderingEnabled = FALSE;
} else {
- info->directRenderingEnabled = R128DRIScreenInit(pScreen);
+ if(info->IsSecondary)
+ info->directRenderingEnabled = FALSE;
+ else
+ {
+ /* Xinerama has sync problem with DRI, disable it for now */
+ if(xf86IsEntityShared(pScrn->entityList[0]))
+ {
+ info->directRenderingEnabled = FALSE;
+ xf86DrvMsg(scrnIndex, X_WARNING,
+ "Direct Rendering Disabled -- "
+ "Dual-head configuration is not working with DRI "
+ "at present.\nPlease use only one Device/Screen "
+ "section in your XFConfig file.\n");
+ }
+ else
+ info->directRenderingEnabled =
+ R128DRIScreenInit(pScreen);
+ if(xf86IsEntityShared(pScrn->entityList[0]))
+ {
+ DevUnion* pPriv;
+ R128EntPtr pR128Ent;
+ pPriv = xf86GetEntityPrivate(pScrn->entityList[0],
+ gR128EntityIndex);
+ pR128Ent = pPriv->ptr;
+ pR128Ent->IsDRIEnabled = info->directRenderingEnabled;
+ }
+ }
}
}
#endif
@@ -2479,14 +2704,16 @@ Bool R128ScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
/* DPMS setup - FIXME: also for mirror mode in non-fbdev case? - Michel */
if (info->FBDev)
xf86DPMSInit(pScreen, fbdevHWDPMSSetWeak(), 0);
+
else {
- if (!info->HasPanelRegs || info->BIOSDisplay == R128_BIOS_DISPLAY_CRT)
- xf86DPMSInit(pScreen, R128DisplayPowerManagementSet, 0);
- else if (info->HasPanelRegs || info->BIOSDisplay == R128_BIOS_DISPLAY_FP)
+ if (info->DisplayType == MT_LCD)
xf86DPMSInit(pScreen, R128DisplayPowerManagementSetLCD, 0);
+ else
+ xf86DPMSInit(pScreen, R128DisplayPowerManagementSet, 0);
}
- R128InitVideo(pScreen);
+ if (!info->IsSecondary)
+ R128InitVideo(pScreen);
/* Provide SaveScreen */
pScreen->SaveScreen = R128SaveScreen;
@@ -2567,6 +2794,25 @@ static void R128RestoreCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
OUTREG(R128_CRTC_PITCH, restore->crtc_pitch);
}
+/* Write CRTC2 registers. */
+static void R128RestoreCrtc2Registers(ScrnInfoPtr pScrn,
+ R128SavePtr restore)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+ unsigned char *R128MMIO = info->MMIO;
+
+ OUTREGP(R128_CRTC2_GEN_CNTL, restore->crtc2_gen_cntl,
+ R128_CRTC2_DISP_DIS);
+
+ OUTREG(R128_CRTC2_H_TOTAL_DISP, restore->crtc2_h_total_disp);
+ OUTREG(R128_CRTC2_H_SYNC_STRT_WID, restore->crtc2_h_sync_strt_wid);
+ OUTREG(R128_CRTC2_V_TOTAL_DISP, restore->crtc2_v_total_disp);
+ OUTREG(R128_CRTC2_V_SYNC_STRT_WID, restore->crtc2_v_sync_strt_wid);
+ OUTREG(R128_CRTC2_OFFSET, restore->crtc2_offset);
+ OUTREG(R128_CRTC2_OFFSET_CNTL, restore->crtc2_offset_cntl);
+ OUTREG(R128_CRTC2_PITCH, restore->crtc2_pitch);
+}
+
/* Write flat panel registers */
static void R128RestoreFPRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
{
@@ -2574,8 +2820,8 @@ static void R128RestoreFPRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
unsigned char *R128MMIO = info->MMIO;
CARD32 tmp;
-
- /*OUTREG(R128_CRTC2_GEN_CNTL, restore->crtc2_gen_cntl);*/
+ if (info->BIOSDisplay != R128_DUALHEAD)
+ OUTREG(R128_CRTC2_GEN_CNTL, restore->crtc2_gen_cntl);
OUTREG(R128_FP_HORZ_STRETCH, restore->fp_horz_stretch);
OUTREG(R128_FP_VERT_STRETCH, restore->fp_vert_stretch);
OUTREG(R128_FP_CRTC_H_TOTAL_DISP, restore->fp_crtc_h_total_disp);
@@ -2616,7 +2862,28 @@ static void R128PLLWriteUpdate(ScrnInfoPtr pScrn)
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- OUTPLLP(pScrn, R128_PPLL_REF_DIV, R128_PPLL_ATOMIC_UPDATE_W, 0xffff);
+ while (INPLL(pScrn, R128_PPLL_REF_DIV) & R128_PPLL_ATOMIC_UPDATE_R);
+
+ OUTPLLP(pScrn, R128_PPLL_REF_DIV, R128_PPLL_ATOMIC_UPDATE_W,
+ ~R128_PPLL_ATOMIC_UPDATE_W);
+
+}
+
+static void R128PLL2WaitForReadUpdateComplete(ScrnInfoPtr pScrn)
+{
+ while (INPLL(pScrn, R128_P2PLL_REF_DIV) & R128_P2PLL_ATOMIC_UPDATE_R);
+}
+
+static void R128PLL2WriteUpdate(ScrnInfoPtr pScrn)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+ unsigned char *R128MMIO = info->MMIO;
+
+ while (INPLL(pScrn, R128_P2PLL_REF_DIV) & R128_P2PLL_ATOMIC_UPDATE_R);
+
+ OUTPLLP(pScrn, R128_P2PLL_REF_DIV,
+ R128_P2PLL_ATOMIC_UPDATE_W,
+ ~(R128_P2PLL_ATOMIC_UPDATE_W));
}
/* Write PLL registers. */
@@ -2625,33 +2892,44 @@ static void R128RestorePLLRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- OUTREGP(R128_CLOCK_CNTL_INDEX, R128_PLL_DIV_SEL, 0xffff);
+
+ OUTPLLP(pScrn, R128_VCLK_ECP_CNTL,
+ R128_VCLK_SRC_SEL_CPUCLK,
+ ~(R128_VCLK_SRC_SEL_MASK));
OUTPLLP(pScrn,
R128_PPLL_CNTL,
R128_PPLL_RESET
| R128_PPLL_ATOMIC_UPDATE_EN
| R128_PPLL_VGA_ATOMIC_UPDATE_EN,
- 0xffff);
+ ~(R128_PPLL_RESET
+ | R128_PPLL_ATOMIC_UPDATE_EN
+ | R128_PPLL_VGA_ATOMIC_UPDATE_EN));
- R128PLLWaitForReadUpdateComplete(pScrn);
+ OUTREGP(R128_CLOCK_CNTL_INDEX, R128_PLL_DIV_SEL, ~(R128_PLL_DIV_SEL));
+
+/* R128PLLWaitForReadUpdateComplete(pScrn);*/
OUTPLLP(pScrn, R128_PPLL_REF_DIV,
restore->ppll_ref_div, ~R128_PPLL_REF_DIV_MASK);
- R128PLLWriteUpdate(pScrn);
+/* R128PLLWriteUpdate(pScrn);
- R128PLLWaitForReadUpdateComplete(pScrn);
+ R128PLLWaitForReadUpdateComplete(pScrn);*/
OUTPLLP(pScrn, R128_PPLL_DIV_3,
restore->ppll_div_3, ~R128_PPLL_FB3_DIV_MASK);
- R128PLLWriteUpdate(pScrn);
+/* R128PLLWriteUpdate(pScrn);*/
OUTPLLP(pScrn, R128_PPLL_DIV_3,
restore->ppll_div_3, ~R128_PPLL_POST3_DIV_MASK);
- R128PLLWriteUpdate(pScrn);
+ R128PLLWriteUpdate(pScrn);
R128PLLWaitForReadUpdateComplete(pScrn);
+
OUTPLL(R128_HTOTAL_CNTL, restore->htotal_cntl);
- R128PLLWriteUpdate(pScrn);
+/* R128PLLWriteUpdate(pScrn);*/
- OUTPLLP(pScrn, R128_PPLL_CNTL, 0, ~R128_PPLL_RESET);
+ OUTPLLP(pScrn, R128_PPLL_CNTL, 0, ~(R128_PPLL_RESET
+ | R128_PPLL_SLEEP
+ | R128_PPLL_ATOMIC_UPDATE_EN
+ | R128_PPLL_VGA_ATOMIC_UPDATE_EN));
R128TRACE(("Wrote: 0x%08x 0x%08x 0x%08x (0x%08x)\n",
restore->ppll_ref_div,
@@ -2662,6 +2940,82 @@ static void R128RestorePLLRegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
restore->ppll_ref_div & R128_PPLL_REF_DIV_MASK,
restore->ppll_div_3 & R128_PPLL_FB3_DIV_MASK,
(restore->ppll_div_3 & R128_PPLL_POST3_DIV_MASK) >> 16));
+
+ usleep(5000); /* let the clock lock */
+
+ OUTPLLP(pScrn, R128_VCLK_ECP_CNTL,
+ R128_VCLK_SRC_SEL_PPLLCLK,
+ ~(R128_VCLK_SRC_SEL_MASK));
+
+}
+
+/* Write PLL2 registers. */
+static void R128RestorePLL2Registers(ScrnInfoPtr pScrn, R128SavePtr restore)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+ unsigned char *R128MMIO = info->MMIO;
+
+ OUTPLLP(pScrn, R128_V2CLK_VCLKTV_CNTL,
+ R128_V2CLK_SRC_SEL_CPUCLK,
+ ~R128_V2CLK_SRC_SEL_MASK);
+
+ OUTPLLP(pScrn,
+ R128_P2PLL_CNTL,
+ R128_P2PLL_RESET
+ | R128_P2PLL_ATOMIC_UPDATE_EN
+ | R128_P2PLL_VGA_ATOMIC_UPDATE_EN,
+ ~(R128_P2PLL_RESET
+ | R128_P2PLL_ATOMIC_UPDATE_EN
+ | R128_P2PLL_VGA_ATOMIC_UPDATE_EN));
+
+#if 1
+ OUTREGP(R128_CLOCK_CNTL_INDEX, 0, R128_PLL2_DIV_SEL_MASK);
+#endif
+
+ /*R128PLL2WaitForReadUpdateComplete(pScrn);*/
+
+ OUTPLLP(pScrn, R128_P2PLL_REF_DIV, restore->p2pll_ref_div, ~R128_P2PLL_REF_DIV_MASK);
+
+/* R128PLL2WriteUpdate(pScrn);
+ R128PLL2WaitForReadUpdateComplete(pScrn);*/
+
+ OUTPLLP(pScrn, R128_P2PLL_DIV_0,
+ restore->p2pll_div_0, ~R128_P2PLL_FB0_DIV_MASK);
+
+/* R128PLL2WriteUpdate(pScrn);
+ R128PLL2WaitForReadUpdateComplete(pScrn);*/
+
+ OUTPLLP(pScrn, R128_P2PLL_DIV_0,
+ restore->p2pll_div_0, ~R128_P2PLL_POST0_DIV_MASK);
+
+ R128PLL2WriteUpdate(pScrn);
+ R128PLL2WaitForReadUpdateComplete(pScrn);
+
+ OUTPLL(R128_HTOTAL2_CNTL, restore->htotal_cntl2);
+
+/* R128PLL2WriteUpdate(pScrn);*/
+
+ OUTPLLP(pScrn, R128_P2PLL_CNTL, 0, ~(R128_P2PLL_RESET
+ | R128_P2PLL_SLEEP
+ | R128_P2PLL_ATOMIC_UPDATE_EN
+ | R128_P2PLL_VGA_ATOMIC_UPDATE_EN));
+
+ R128TRACE(("Wrote: 0x%08x 0x%08x 0x%08x (0x%08x)\n",
+ restore->p2pll_ref_div,
+ restore->p2pll_div_0,
+ restore->htotal_cntl2,
+ INPLL(pScrn, RADEON_P2PLL_CNTL)));
+ R128TRACE(("Wrote: rd=%d, fd=%d, pd=%d\n",
+ restore->p2pll_ref_div & RADEON_P2PLL_REF_DIV_MASK,
+ restore->p2pll_div_0 & RADEON_P2PLL_FB3_DIV_MASK,
+ (restore->p2pll_div_0 & RADEON_P2PLL_POST3_DIV_MASK) >>16));
+
+ usleep(5000); /* Let the clock to lock */
+
+ OUTPLLP(pScrn, R128_V2CLK_VCLKTV_CNTL,
+ R128_V2CLK_SRC_SEL_P2PLLCLK,
+ ~R128_V2CLK_SRC_SEL_MASK);
+
}
/* Write DDA registers. */
@@ -2674,6 +3028,16 @@ static void R128RestoreDDARegisters(ScrnInfoPtr pScrn, R128SavePtr restore)
OUTREG(R128_DDA_ON_OFF, restore->dda_on_off);
}
+/* Write DDA registers. */
+static void R128RestoreDDA2Registers(ScrnInfoPtr pScrn, R128SavePtr restore)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+ unsigned char *R128MMIO = info->MMIO;
+
+ OUTREG(R128_DDA2_CONFIG, restore->dda2_config);
+ OUTREG(R128_DDA2_ON_OFF, restore->dda2_on_off);
+}
+
/* Write palette data. */
static void R128RestorePalette(ScrnInfoPtr pScrn, R128SavePtr restore)
{
@@ -2683,27 +3047,113 @@ static void R128RestorePalette(ScrnInfoPtr pScrn, R128SavePtr restore)
if (!restore->palette_valid) return;
- /* Select palette 0 (main CRTC) if using FP-enabled chip */
- if (info->HasPanelRegs || info->isDFP) PAL_SELECT(0);
+ PAL_SELECT(1);
+ OUTPAL_START(0);
+ for (i = 0; i < 256; i++) {
+ R128WaitForFifo(pScrn, 32); /* delay */
+ OUTPAL_NEXT_CARD32(restore->palette2[i]);
+ }
+ PAL_SELECT(0);
OUTPAL_START(0);
- for (i = 0; i < 256; i++) OUTPAL_NEXT_CARD32(restore->palette[i]);
+ for (i = 0; i < 256; i++) {
+ R128WaitForFifo(pScrn, 32); /* delay */
+ OUTPAL_NEXT_CARD32(restore->palette[i]);
+ }
+
}
/* Write out state to define a new video mode. */
static void R128RestoreMode(ScrnInfoPtr pScrn, R128SavePtr restore)
{
R128InfoPtr info = R128PTR(pScrn);
+ DevUnion* pPriv;
+ R128EntPtr pR128Ent;
+ static R128SaveRec restore0;
R128TRACE(("R128RestoreMode(%p)\n", restore));
- R128RestoreCommonRegisters(pScrn, restore);
- R128RestoreCrtcRegisters(pScrn, restore);
- if (!(info->HasPanelRegs) || info->BIOSDisplay == R128_BIOS_DISPLAY_CRT){
+ if(!info->HasCRTC2)
+ {
+ R128RestoreCommonRegisters(pScrn, restore);
+ R128RestoreDDARegisters(pScrn, restore);
+ R128RestoreCrtcRegisters(pScrn, restore);
+ if((info->DisplayType == MT_DFP) ||
+ (info->DisplayType == MT_LCD))
+ {
+ R128RestoreFPRegisters(pScrn, restore);
+ }
R128RestorePLLRegisters(pScrn, restore);
+ return;
+ }
+
+ pPriv = xf86GetEntityPrivate(pScrn->entityList[0],
+ gR128EntityIndex);
+ pR128Ent = pPriv->ptr;
+
+
+ /*****
+ When changing mode with Dual-head card (VE/M6), care must
+ be taken for the special order in setting registers. CRTC2 has
+ to be set before changing CRTC_EXT register.
+ In the dual-head setup, X server calls this routine twice with
+ primary and secondary pScrn pointers respectively. The calls
+ can come with different order. Regardless the order of X server issuing
+ the calls, we have to ensure we set registers in the right order!!!
+ Otherwise we may get a blank screen.
+ *****/
+
+ if(info->IsSecondary)
+ {
+ if (!pR128Ent->RestorePrimary && !info->SwitchingMode)
+ R128RestoreCommonRegisters(pScrn, restore);
+ R128RestoreDDA2Registers(pScrn, restore);
+ R128RestoreCrtc2Registers(pScrn, restore);
+ R128RestorePLL2Registers(pScrn, restore);
+
+ if(info->SwitchingMode) return;
+
+ pR128Ent->IsSecondaryRestored = TRUE;
+
+ if(pR128Ent->RestorePrimary)
+ {
+ R128InfoPtr info0 = R128PTR(pR128Ent->pPrimaryScrn);
+ pR128Ent->RestorePrimary = FALSE;
+
+ R128RestoreCrtcRegisters(pScrn, &restore0);
+ if((info0->DisplayType == MT_DFP) ||
+ (info0->DisplayType == MT_LCD))
+ {
+ R128RestoreFPRegisters(pScrn, &restore0);
+ }
+
+ R128RestorePLLRegisters(pScrn, &restore0);
+ pR128Ent->IsSecondaryRestored = FALSE;
+
+ }
+ }
+ else
+ {
+ if (!pR128Ent->IsSecondaryRestored)
+ R128RestoreCommonRegisters(pScrn, restore);
+ R128RestoreDDARegisters(pScrn, restore);
+ if(!pR128Ent->HasSecondary || pR128Ent->IsSecondaryRestored
+ || info->SwitchingMode)
+ {
+ pR128Ent->IsSecondaryRestored = FALSE;
+ R128RestoreCrtcRegisters(pScrn, restore);
+ if((info->DisplayType == MT_DFP) ||
+ (info->DisplayType == MT_LCD))
+ {
+ R128RestoreFPRegisters(pScrn, restore);
+ }
+ R128RestorePLLRegisters(pScrn, restore);
+ }
+ else
+ {
+ memcpy(&restore0, restore, sizeof(restore0));
+ pR128Ent->RestorePrimary = TRUE;
+ }
}
- R128RestoreDDARegisters(pScrn, restore);
- if (info->HasPanelRegs || info->isDFP)
- R128RestoreFPRegisters(pScrn, restore);
R128RestorePalette(pScrn, restore);
}
@@ -2754,7 +3204,8 @@ static void R128SaveFPRegisters(ScrnInfoPtr pScrn, R128SavePtr save)
R128InfoPtr info = R128PTR(pScrn);
unsigned char *R128MMIO = info->MMIO;
- save->crtc2_gen_cntl = INREG(R128_CRTC2_GEN_CNTL);
+ if (info->BIOSDisplay != R128_DUALHEAD)
+ save->crtc2_gen_cntl = INREG(R128_CRTC2_GEN_CNTL);
save->fp_crtc_h_total_disp = INREG(R128_FP_CRTC_H_TOTAL_DISP);
save->fp_crtc_v_total_disp = INREG(R128_FP_CRTC_V_TOTAL_DISP);
save->fp_gen_cntl = INREG(R128_FP_GEN_CNTL);
@@ -2768,6 +3219,22 @@ static void R128SaveFPRegisters(ScrnInfoPtr pScrn, R128SavePtr save)
save->tmds_transmitter_cntl = INREG(R128_TMDS_TRANSMITTER_CNTL);
}
+/* Read CRTC2 registers. */
+static void R128SaveCrtc2Registers(ScrnInfoPtr pScrn, R128SavePtr save)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+ unsigned char *R128MMIO = info->MMIO;
+
+ save->crtc2_gen_cntl = INREG(R128_CRTC2_GEN_CNTL);
+ save->crtc2_h_total_disp = INREG(R128_CRTC2_H_TOTAL_DISP);
+ save->crtc2_h_sync_strt_wid = INREG(R128_CRTC2_H_SYNC_STRT_WID);
+ save->crtc2_v_total_disp = INREG(R128_CRTC2_V_TOTAL_DISP);
+ save->crtc2_v_sync_strt_wid = INREG(R128_CRTC2_V_SYNC_STRT_WID);
+ save->crtc2_offset = INREG(R128_CRTC2_OFFSET);
+ save->crtc2_offset_cntl = INREG(R128_CRTC2_OFFSET_CNTL);
+ save->crtc2_pitch = INREG(R128_CRTC2_PITCH);
+}
+
/* Read PLL registers. */
static void R128SavePLLRegisters(ScrnInfoPtr pScrn, R128SavePtr save)
{
@@ -2785,6 +3252,23 @@ static void R128SavePLLRegisters(ScrnInfoPtr pScrn, R128SavePtr save)
(save->ppll_div_3 & R128_PPLL_POST3_DIV_MASK) >> 16));
}
+/* Read PLL2 registers. */
+static void R128SavePLL2Registers(ScrnInfoPtr pScrn, R128SavePtr save)
+{
+ save->p2pll_ref_div = INPLL(pScrn, R128_P2PLL_REF_DIV);
+ save->p2pll_div_0 = INPLL(pScrn, R128_P2PLL_DIV_0);
+ save->htotal_cntl2 = INPLL(pScrn, R128_HTOTAL2_CNTL);
+
+ R128TRACE(("Read: 0x%08x 0x%08x 0x%08x\n",
+ save->p2pll_ref_div,
+ save->p2pll_div_0,
+ save->htotal_cntl2));
+ R128TRACE(("Read: rd=%d, fd=%d, pd=%d\n",
+ save->p2pll_ref_div & R128_P2PLL_REF_DIV_MASK,
+ save->p2pll_div_0 & R128_P2PLL_FB0_DIV_MASK,
+ (save->p2pll_div_0 & R128_P2PLL_POST0_DIV_MASK) >> 16));
+}
+
/* Read DDA registers. */
static void R128SaveDDARegisters(ScrnInfoPtr pScrn, R128SavePtr save)
{
@@ -2795,6 +3279,16 @@ static void R128SaveDDARegisters(ScrnInfoPtr pScrn, R128SavePtr save)
save->dda_on_off = INREG(R128_DDA_ON_OFF);
}
+/* Read DDA2 registers. */
+static void R128SaveDDA2Registers(ScrnInfoPtr pScrn, R128SavePtr save)
+{
+ R128InfoPtr info = R128PTR(pScrn);
+ unsigned char *R128MMIO = info->MMIO;
+
+ save->dda2_config = INREG(R128_DDA2_CONFIG);
+ save->dda2_on_off = INREG(R128_DDA2_ON_OFF);
+}
+
/* Read palette data. */
static void R128SavePalette(ScrnInfoPtr pScrn, R128SavePtr save)
{
@@ -2802,9 +3296,10 @@ static void R128SavePalette(ScrnInfoPtr pScrn, R128SavePtr save)
unsigned char *R128MMIO = info->MMIO;
int i;
- /* Select palette 0 (main CRTC) if using FP-enabled chip */
- if (info->HasPanelRegs || info->isDFP) PAL_SELECT(0);
-
+ PAL_SELECT(1);
+ INPAL_START(0);
+ for (i = 0; i < 256; i++) save->palette2[i] = INPAL_NEXT();
+ PAL_SELECT(0);
INPAL_START(0);
for (i = 0; i < 256; i++) save->palette[i] = INPAL_NEXT();
save->palette_valid = TRUE;
@@ -2813,15 +3308,29 @@ static void R128SavePalette(ScrnInfoPtr pScrn, R128SavePtr save)
/* Save state that defines current video mode. */
static void R128SaveMode(ScrnInfoPtr pScrn, R128SavePtr save)
{
+ R128InfoPtr info = R128PTR(pScrn);
+
R128TRACE(("R128SaveMode(%p)\n", save));
- R128SaveCommonRegisters(pScrn, save);
- R128SaveCrtcRegisters(pScrn, save);
- if (R128PTR(pScrn)->HasPanelRegs || R128PTR(pScrn)->isDFP)
- R128SaveFPRegisters(pScrn, save);
- R128SavePLLRegisters(pScrn, save);
- R128SaveDDARegisters(pScrn, save);
- R128SavePalette(pScrn, save);
+ if(info->IsSecondary)
+ {
+ R128SaveCrtc2Registers(pScrn, save);
+ R128SavePLL2Registers(pScrn, save);
+ R128SaveDDA2Registers(pScrn, save);
+ }
+ else
+ {
+ R128SaveCommonRegisters(pScrn, save);
+ R128SaveCrtcRegisters(pScrn, save);
+ if((info->DisplayType == MT_DFP) ||
+ (info->DisplayType == MT_LCD))
+ {
+ R128SaveFPRegisters(pScrn, save);
+ }
+ R128SavePLLRegisters(pScrn, save);
+ R128SaveDDARegisters(pScrn, save);
+ R128SavePalette(pScrn, save);
+ }
R128TRACE(("R128SaveMode returns %p\n", save));
}
@@ -2839,31 +3348,34 @@ static void R128Save(ScrnInfoPtr pScrn)
return;
}
- if (info->VGAAccess) {
- vgaHWPtr hwp = VGAHWPTR(pScrn);
+ if (!info->IsSecondary) {
+ if (info->VGAAccess) {
+ vgaHWPtr hwp = VGAHWPTR(pScrn);
- vgaHWUnlock(hwp);
+ vgaHWUnlock(hwp);
#if defined(__powerpc__)
- /* temporary hack to prevent crashing on PowerMacs when trying to
- * read VGA fonts and colormap, will find a better solution
- * in the future. TODO: Check if there's actually some VGA stuff
- * setup in the card at all !!
- */
- vgaHWSave(pScrn, &hwp->SavedReg, VGA_SR_MODE); /* Save mode only */
+ /* temporary hack to prevent crashing on PowerMacs when trying to
+ * read VGA fonts and colormap, will find a better solution
+ * in the future. TODO: Check if there's actually some VGA stuff
+ * setup in the card at all !!
+ */
+ vgaHWSave(pScrn, &hwp->SavedReg, VGA_SR_MODE); /* Save mode only */
#else
- /* Save mode * & fonts & cmap */
- vgaHWSave(pScrn, &hwp->SavedReg, VGA_SR_MODE | VGA_SR_FONTS);
+ /* Save mode * & fonts & cmap */
+ vgaHWSave(pScrn, &hwp->SavedReg, VGA_SR_MODE | VGA_SR_FONTS);
#endif
- vgaHWLock(hwp);
+ vgaHWLock(hwp);
+ }
+
+ save->dp_datatype = INREG(R128_DP_DATATYPE);
+ save->gen_reset_cntl = INREG(R128_GEN_RESET_CNTL);
+ save->clock_cntl_index = INREG(R128_CLOCK_CNTL_INDEX);
+ save->amcgpio_en_reg = INREG(R128_AMCGPIO_EN_REG);
+ save->amcgpio_mask = INREG(R128_AMCGPIO_MASK);
}
R128SaveMode(pScrn, save);
- save->dp_datatype = INREG(R128_DP_DATATYPE);
- save->gen_reset_cntl = INREG(R128_GEN_RESET_CNTL);
- save->clock_cntl_index = INREG(R128_CLOCK_CNTL_INDEX);
- save->amcgpio_en_reg = INREG(R128_AMCGPIO_EN_REG);
- save->amcgpio_mask = INREG(R128_AMCGPIO_MASK);
}
/* Restore the original (text) mode. */
@@ -2880,25 +3392,46 @@ static void R128Restore(ScrnInfoPtr pScrn)
}
R128Blank(pScrn);
- OUTREG(R128_AMCGPIO_MASK, restore->amcgpio_mask);
- OUTREG(R128_AMCGPIO_EN_REG, restore->amcgpio_en_reg);
- OUTREG(R128_CLOCK_CNTL_INDEX, restore->clock_cntl_index);
- OUTREG(R128_GEN_RESET_CNTL, restore->gen_reset_cntl);
- OUTREG(R128_DP_DATATYPE, restore->dp_datatype);
+
+ if (!info->IsSecondary) {
+ OUTREG(R128_AMCGPIO_MASK, restore->amcgpio_mask);
+ OUTREG(R128_AMCGPIO_EN_REG, restore->amcgpio_en_reg);
+ OUTREG(R128_CLOCK_CNTL_INDEX, restore->clock_cntl_index);
+ OUTREG(R128_GEN_RESET_CNTL, restore->gen_reset_cntl);
+ OUTREG(R128_DP_DATATYPE, restore->dp_datatype);
+ }
R128RestoreMode(pScrn, restore);
if (info->VGAAccess) {
vgaHWPtr hwp = VGAHWPTR(pScrn);
- vgaHWUnlock(hwp);
+ if (!info->IsSecondary) {
+ vgaHWUnlock(hwp);
#if defined(__powerpc__)
- /* Temporary hack to prevent crashing on PowerMacs when trying to
- * write VGA fonts, will find a better solution in the future
- */
- vgaHWRestore(pScrn, &hwp->SavedReg, VGA_SR_MODE );
+ /* Temporary hack to prevent crashing on PowerMacs when trying to
+ * write VGA fonts, will find a better solution in the future
+ */
+ vgaHWRestore(pScrn, &hwp->SavedReg, VGA_SR_MODE );
#else
- vgaHWRestore(pScrn, &hwp->SavedReg, VGA_SR_MODE | VGA_SR_FONTS );
+ vgaHWRestore(pScrn, &hwp->SavedReg, VGA_SR_MODE | VGA_SR_FONTS );
#endif
- vgaHWLock(hwp);
+ vgaHWLock(hwp);
+ } else {
+ R128EntPtr pR128Ent = R128EntPriv(pScrn);
+ ScrnInfoPtr pScrn0 = pR128Ent->pPrimaryScrn;
+ R128InfoPtr info0 = R128PTR(pScrn0);
+ vgaHWPtr hwp0;
+
+ if (info0->VGAAccess) {
+ hwp0 = VGAHWPTR(pScrn0);
+ vgaHWUnlock(hwp0);
+#if defined(__powerpc__)
+ vgaHWRestore(pScrn0, &hwp0->SavedReg, VGA_SR_MODE);
+#else
+ vgaHWRestore(pScrn0, &hwp0->SavedReg, VGA_SR_MODE | VGA_SR_FONTS );
+#endif
+ vgaHWLock(hwp0);
+ }
+ }
}
R128WaitForVerticalSync(pScrn);
@@ -2959,18 +3492,11 @@ static Bool R128InitCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr save,
return FALSE;
}
- switch (info->BIOSDisplay) {
- case R128_BIOS_DISPLAY_FP:
+ if ((info->DisplayType == MT_DFP) ||
+ (info->DisplayType == MT_LCD))
hsync_fudge = hsync_fudge_fp[format-1];
- break;
- case R128_BIOS_DISPLAY_FP_CRT:
- hsync_fudge = hsync_fudge_fp_crt[format-1];
- break;
- case R128_BIOS_DISPLAY_CRT:
- default:
- hsync_fudge = hsync_fudge_default[format-1];
- break;
- }
+ else
+ hsync_fudge = hsync_fudge_default[format-1];
save->crtc_gen_cntl = (R128_CRTC_EXT_DISP_EN
| R128_CRTC_EN
@@ -2985,7 +3511,19 @@ static Bool R128InitCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr save,
? R128_CRTC_CSYNC_EN
: 0));
- save->crtc_ext_cntl = R128_VGA_ATI_LINEAR | R128_XCRT_CNT_EN;
+ if((info->DisplayType == MT_DFP) ||
+ (info->DisplayType == MT_LCD))
+ {
+ save->crtc_ext_cntl = R128_VGA_ATI_LINEAR |
+ R128_XCRT_CNT_EN;
+ save->crtc_gen_cntl &= ~(R128_CRTC_DBL_SCAN_EN |
+ R128_CRTC_INTERLACE_EN);
+ }
+ else
+ save->crtc_ext_cntl = R128_VGA_ATI_LINEAR |
+ R128_XCRT_CNT_EN |
+ R128_CRTC_CRT_ON;
+
save->dac_cntl = (R128_DAC_MASK_ALL
| R128_DAC_VGA_ADR_EN
| (info->dac6bits ? 0 : R128_DAC_8BIT_EN));
@@ -3062,6 +3600,92 @@ static Bool R128InitCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr save,
return TRUE;
}
+/* Define CRTC2 registers for requested video mode. */
+static Bool R128InitCrtc2Registers(ScrnInfoPtr pScrn, R128SavePtr save,
+ DisplayModePtr mode, R128InfoPtr info)
+{
+ int format;
+ int hsync_start;
+ int hsync_wid;
+ int hsync_fudge;
+ int vsync_wid;
+ int bytpp;
+ int hsync_fudge_default[] = { 0x00, 0x12, 0x09, 0x09, 0x06, 0x05 };
+
+ switch (info->CurrentLayout.pixel_code) {
+ case 4: format = 1; bytpp = 0; break;
+ case 8: format = 2; bytpp = 1; break;
+ case 15: format = 3; bytpp = 2; break; /* 555 */
+ case 16: format = 4; bytpp = 2; break; /* 565 */
+ case 24: format = 5; bytpp = 3; break; /* RGB */
+ case 32: format = 6; bytpp = 4; break; /* xRGB */
+ default:
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "Unsupported pixel depth (%d)\n", info->CurrentLayout.bitsPerPixel);
+ return FALSE;
+ }
+ R128TRACE(("Format = %d (%d bytes per pixel)\n", format, bytpp));
+
+ hsync_fudge = hsync_fudge_default[format-1];
+
+ save->crtc2_gen_cntl = (R128_CRTC2_EN
+ | (format << 8)
+ | ((mode->Flags & V_DBLSCAN)
+ ? R128_CRTC2_DBL_SCAN_EN
+ : 0));
+/*
+ save->crtc2_gen_cntl &= ~R128_CRTC_EXT_DISP_EN;
+ save->crtc2_gen_cntl |= (1 << 21);
+*/
+ save->crtc2_h_total_disp = ((((mode->CrtcHTotal / 8) - 1) & 0xffff)
+ | (((mode->CrtcHDisplay / 8) - 1) << 16));
+
+ hsync_wid = (mode->CrtcHSyncEnd - mode->CrtcHSyncStart) / 8;
+ if (!hsync_wid) hsync_wid = 1;
+ if (hsync_wid > 0x3f) hsync_wid = 0x3f;
+
+ hsync_start = mode->CrtcHSyncStart - 8 + hsync_fudge;
+
+ save->crtc2_h_sync_strt_wid = ((hsync_start & 0xfff)
+ | (hsync_wid << 16)
+ | ((mode->Flags & V_NHSYNC)
+ ? R128_CRTC2_H_SYNC_POL
+ : 0));
+
+#if 1
+ /* This works for double scan mode. */
+ save->crtc2_v_total_disp = (((mode->CrtcVTotal - 1) & 0xffff)
+ | ((mode->CrtcVDisplay - 1) << 16));
+#else
+ /* This is what cce/nbmode.c example code
+ does -- is this correct? */
+ save->crtc2_v_total_disp = (((mode->CrtcVTotal - 1) & 0xffff)
+ | ((mode->CrtcVDisplay
+ * ((mode->Flags & V_DBLSCAN) ? 2 : 1) - 1)
+ << 16));
+#endif
+
+ vsync_wid = mode->CrtcVSyncEnd - mode->CrtcVSyncStart;
+ if (!vsync_wid) vsync_wid = 1;
+ if (vsync_wid > 0x1f) vsync_wid = 0x1f;
+
+ save->crtc2_v_sync_strt_wid = (((mode->CrtcVSyncStart - 1) & 0xfff)
+ | (vsync_wid << 16)
+ | ((mode->Flags & V_NVSYNC)
+ ? R128_CRTC2_V_SYNC_POL
+ : 0));
+
+ save->crtc2_offset = 0;
+ save->crtc2_offset_cntl = 0;
+
+ save->crtc2_pitch = info->CurrentLayout.displayWidth / 8;
+
+ R128TRACE(("Pitch = %d bytes (virtualX = %d, displayWidth = %d)\n",
+ save->crtc2_pitch, pScrn->virtualX,
+ info->CurrentLayout.displayWidth));
+ return TRUE;
+}
+
/* Define CRTC registers for requested video mode. */
static void R128InitFPRegisters(R128SavePtr orig, R128SavePtr save,
DisplayModePtr mode, R128InfoPtr info)
@@ -3134,9 +3758,14 @@ static void R128InitFPRegisters(R128SavePtr orig, R128SavePtr save,
the flat panel and external CRT to either simultaneously display
the same image or display two different images. */
+
if(!info->isDFP){
if (info->BIOSDisplay == R128_BIOS_DISPLAY_FP_CRT) {
save->crtc_ext_cntl |= R128_CRTC_CRT_ON;
+ } else if (info->BIOSDisplay == R128_DUALHEAD) {
+ save->crtc_ext_cntl |= R128_CRTC_CRT_ON;
+ save->dac_cntl |= R128_DAC_CRT_SEL_CRTC2;
+ save->dac_cntl |= R128_DAC_PALETTE2_SNOOP_EN;
} else {
save->crtc_ext_cntl &= ~R128_CRTC_CRT_ON;
save->dac_cntl |= R128_DAC_CRT_SEL_CRTC2;
@@ -3222,6 +3851,58 @@ static void R128InitPLLRegisters(ScrnInfoPtr pScrn, R128SavePtr save,
}
+/* Define PLL2 registers for requested video mode. */
+static void R128InitPLL2Registers(R128SavePtr save, R128PLLPtr pll,
+ double dot_clock)
+{
+ unsigned long freq = dot_clock * 100;
+ struct {
+ int divider;
+ int bitvalue;
+ } *post_div,
+ post_divs[] = {
+ /* From RAGE 128 VR/RAGE 128 GL Register
+ Reference Manual (Technical Reference
+ Manual P/N RRG-G04100-C Rev. 0.04), page
+ 3-17 (PLL_DIV_[3:0]). */
+ { 1, 0 }, /* VCLK_SRC */
+ { 2, 1 }, /* VCLK_SRC/2 */
+ { 4, 2 }, /* VCLK_SRC/4 */
+ { 8, 3 }, /* VCLK_SRC/8 */
+
+ { 3, 4 }, /* VCLK_SRC/3 */
+ /* bitvalue = 5 is reserved */
+ { 6, 6 }, /* VCLK_SRC/6 */
+ { 12, 7 }, /* VCLK_SRC/12 */
+ { 0, 0 }
+ };
+
+ if (freq > pll->max_pll_freq) freq = pll->max_pll_freq;
+ if (freq * 12 < pll->min_pll_freq) freq = pll->min_pll_freq / 12;
+
+ for (post_div = &post_divs[0]; post_div->divider; ++post_div) {
+ save->pll_output_freq_2 = post_div->divider * freq;
+ if (save->pll_output_freq_2 >= pll->min_pll_freq
+ && save->pll_output_freq_2 <= pll->max_pll_freq) break;
+ }
+
+ save->dot_clock_freq_2 = freq;
+ save->feedback_div_2 = R128Div(pll->reference_div
+ * save->pll_output_freq_2,
+ pll->reference_freq);
+ save->post_div_2 = post_div->divider;
+
+ R128TRACE(("dc=%d, of=%d, fd=%d, pd=%d\n",
+ save->dot_clock_freq_2,
+ save->pll_output_freq_2,
+ save->feedback_div_2,
+ save->post_div_2));
+
+ save->p2pll_ref_div = pll->reference_div;
+ save->p2pll_div_0 = (save->feedback_div_2 | (post_div->bitvalue<<16));
+ save->htotal_cntl2 = 0;
+}
+
/* Define DDA registers for requested video mode. */
static Bool R128InitDDARegisters(ScrnInfoPtr pScrn, R128SavePtr save,
R128PLLPtr pll, R128InfoPtr info,
@@ -3291,6 +3972,77 @@ static Bool R128InitDDARegisters(ScrnInfoPtr pScrn, R128SavePtr save,
return TRUE;
}
+/* Define DDA2 registers for requested video mode. */
+static Bool R128InitDDA2Registers(ScrnInfoPtr pScrn, R128SavePtr save,
+ R128PLLPtr pll, R128InfoPtr info,
+ DisplayModePtr mode)
+{
+ int DisplayFifoWidth = 128;
+ int DisplayFifoDepth = 32;
+ int XclkFreq;
+ int VclkFreq;
+ int XclksPerTransfer;
+ int XclksPerTransferPrecise;
+ int UseablePrecision;
+ int Roff;
+ int Ron;
+
+ XclkFreq = pll->xclk;
+
+ VclkFreq = R128Div(pll->reference_freq * save->feedback_div_2,
+ pll->reference_div * save->post_div_2);
+
+ if(info->isDFP && !info->isPro2){
+ if(info->PanelXRes != mode->CrtcHDisplay)
+ VclkFreq = (VclkFreq * mode->CrtcHDisplay)/info->PanelXRes;
+ }
+
+ XclksPerTransfer = R128Div(XclkFreq * DisplayFifoWidth,
+ VclkFreq * (info->CurrentLayout.pixel_bytes * 8));
+
+ UseablePrecision = R128MinBits(XclksPerTransfer) + 1;
+
+ XclksPerTransferPrecise = R128Div((XclkFreq * DisplayFifoWidth)
+ << (11 - UseablePrecision),
+ VclkFreq * (info->CurrentLayout.pixel_bytes * 8));
+
+ Roff = XclksPerTransferPrecise * (DisplayFifoDepth - 4);
+
+ Ron = (4 * info->ram->MB
+ + 3 * MAX(info->ram->Trcd - 2, 0)
+ + 2 * info->ram->Trp
+ + info->ram->Twr
+ + info->ram->CL
+ + info->ram->Tr2w
+ + XclksPerTransfer) << (11 - UseablePrecision);
+
+
+ if (Ron + info->ram->Rloop >= Roff) {
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "(Ron = %d) + (Rloop = %d) >= (Roff = %d)\n",
+ Ron, info->ram->Rloop, Roff);
+ return FALSE;
+ }
+
+ save->dda2_config = (XclksPerTransferPrecise
+ | (UseablePrecision << 16)
+ | (info->ram->Rloop << 20));
+
+ /*save->dda2_on_off = (Ron << 16) | Roff;*/
+ /* shift most be 18 otherwise there's corruption on crtc2 */
+ save->dda2_on_off = (Ron << 18) | Roff;
+
+ R128TRACE(("XclkFreq = %d; VclkFreq = %d; per = %d, %d (useable = %d)\n",
+ XclkFreq,
+ VclkFreq,
+ XclksPerTransfer,
+ XclksPerTransferPrecise,
+ UseablePrecision));
+ R128TRACE(("Roff = %d, Ron = %d, Rloop = %d\n",
+ Roff, Ron, info->ram->Rloop));
+
+ return TRUE;
+}
#if 0
/* Define initial palette for requested video mode. This doesn't do
@@ -3358,21 +4110,42 @@ static Bool R128Init(ScrnInfoPtr pScrn, DisplayModePtr mode, R128SavePtr save)
info->Flags = mode->Flags;
- R128InitCommonRegisters(save, info);
- if (!R128InitCrtcRegisters(pScrn, save, mode, info)) return FALSE;
- if (info->HasPanelRegs || info->isDFP)
- R128InitFPRegisters(&info->SavedReg, save, mode, info);
- if(dot_clock > 0){
- R128InitPLLRegisters(pScrn, save, &info->pll, dot_clock);
- if (!R128InitDDARegisters(pScrn, save, &info->pll, info, mode))
- return FALSE;
+ if(info->IsSecondary)
+ {
+ if (!R128InitCrtc2Registers(pScrn, save,
+ pScrn->currentMode,info))
+ return FALSE;
+ R128InitPLL2Registers(save, &info->pll, dot_clock);
+ if (!R128InitDDA2Registers(pScrn, save, &info->pll, info, mode))
+ return FALSE;
}
- else{
- save->ppll_ref_div = info->SavedReg.ppll_ref_div;
- save->ppll_div_3 = info->SavedReg.ppll_div_3;
- save->htotal_cntl = info->SavedReg.htotal_cntl;
- save->dda_config = info->SavedReg.dda_config;
- save->dda_on_off = info->SavedReg.dda_on_off;
+ else
+ {
+ R128InitCommonRegisters(save, info);
+ if(!R128InitCrtcRegisters(pScrn, save, mode, info))
+ return FALSE;
+ if(dot_clock)
+ {
+ R128InitPLLRegisters(pScrn, save, &info->pll, dot_clock);
+ if (!R128InitDDARegisters(pScrn, save, &info->pll, info, mode))
+ return FALSE;
+ }
+ else
+ {
+ save->ppll_ref_div = info->SavedReg.ppll_ref_div;
+ save->ppll_div_3 = info->SavedReg.ppll_div_3;
+ save->htotal_cntl = info->SavedReg.htotal_cntl;
+ save->dda_config = info->SavedReg.dda_config;
+ save->dda_on_off = info->SavedReg.dda_on_off;
+ }
+ /* not used for now */
+ /*if (!info->PaletteSavedOnVT) RADEONInitPalette(save);*/
+ }
+
+ if (((info->DisplayType == MT_DFP) ||
+ (info->DisplayType == MT_LCD)))
+ {
+ R128InitFPRegisters(&info->SavedReg, save, mode, info);
}
R128TRACE(("R128Init returns %p\n", save));
@@ -3414,9 +4187,21 @@ static Bool R128SaveScreen(ScreenPtr pScreen, int mode)
return TRUE;
}
+/*
+ * SwitchMode() doesn't work right on crtc2 on some laptops.
+ * The workaround is to switch the mode, then switch to another VT, then
+ * switch back. --AGD
+ */
Bool R128SwitchMode(int scrnIndex, DisplayModePtr mode, int flags)
{
- return R128ModeInit(xf86Screens[scrnIndex], mode);
+ ScrnInfoPtr pScrn = xf86Screens[scrnIndex];
+ R128InfoPtr info = R128PTR(pScrn);
+ Bool ret;
+
+ info->SwitchingMode = TRUE;
+ ret = R128ModeInit(xf86Screens[scrnIndex], mode);
+ info->SwitchingMode = FALSE;
+ return ret;
}
/* Used to disallow modes that are not supported by the hardware. */
@@ -3434,13 +4219,12 @@ ModeStatus R128ValidMode(int scrnIndex, DisplayModePtr mode,
return MODE_OK;
}
- if (info->HasPanelRegs) {
+ if (info->DisplayType == MT_LCD) {
if (mode->Flags & V_INTERLACE) return MODE_NO_INTERLACE;
if (mode->Flags & V_DBLSCAN) return MODE_NO_DBLESCAN;
}
- if (info->HasPanelRegs &&
- info->BIOSDisplay != R128_BIOS_DISPLAY_CRT &&
+ if (info->DisplayType == MT_LCD &&
info->VBIOS) {
int i;
for (i = info->FPBIOSstart+64; R128_BIOS16(i) != 0; i += 2) {
@@ -3521,7 +4305,14 @@ void R128AdjustFrame(int scrnIndex, int x, int y, int flags)
if (info->CurrentLayout.pixel_code == 24)
Base += 8 * (Base % 3); /* Must be multiple of 8 and 3 */
+ if(info->IsSecondary)
+ {
+ Base += pScrn->fbOffset;
+ OUTREG(R128_CRTC2_OFFSET, Base);
+ }
+ else
OUTREG(R128_CRTC_OFFSET, Base);
+
}
/* Called when VT switching back to the X server. Reinitialize the video
@@ -3649,25 +4440,38 @@ static void R128DisplayPowerManagementSet(ScrnInfoPtr pScrn,
int mask = (R128_CRTC_DISPLAY_DIS
| R128_CRTC_HSYNC_DIS
| R128_CRTC_VSYNC_DIS);
+ int mask2 = R128_CRTC2_DISP_DIS;
switch (PowerManagementMode) {
case DPMSModeOn:
/* Screen: On; HSync: On, VSync: On */
- OUTREGP(R128_CRTC_EXT_CNTL, 0, ~mask);
+ if (info->IsSecondary)
+ OUTREGP(R128_CRTC2_GEN_CNTL, 0, ~mask2);
+ else
+ OUTREGP(R128_CRTC_EXT_CNTL, 0, ~mask);
break;
case DPMSModeStandby:
/* Screen: Off; HSync: Off, VSync: On */
- OUTREGP(R128_CRTC_EXT_CNTL,
- R128_CRTC_DISPLAY_DIS | R128_CRTC_HSYNC_DIS, ~mask);
+ if (info->IsSecondary)
+ OUTREGP(R128_CRTC2_GEN_CNTL, R128_CRTC2_DISP_DIS, ~mask2);
+ else
+ OUTREGP(R128_CRTC_EXT_CNTL,
+ R128_CRTC_DISPLAY_DIS | R128_CRTC_HSYNC_DIS, ~mask);
break;
case DPMSModeSuspend:
/* Screen: Off; HSync: On, VSync: Off */
- OUTREGP(R128_CRTC_EXT_CNTL,
- R128_CRTC_DISPLAY_DIS | R128_CRTC_VSYNC_DIS, ~mask);
+ if (info->IsSecondary)
+ OUTREGP(R128_CRTC2_GEN_CNTL, R128_CRTC2_DISP_DIS, ~mask2);
+ else
+ OUTREGP(R128_CRTC_EXT_CNTL,
+ R128_CRTC_DISPLAY_DIS | R128_CRTC_VSYNC_DIS, ~mask);
break;
case DPMSModeOff:
/* Screen: Off; HSync: Off, VSync: Off */
- OUTREGP(R128_CRTC_EXT_CNTL, mask, ~mask);
+ if (info->IsSecondary)
+ OUTREGP(R128_CRTC2_GEN_CNTL, mask2, ~mask2);
+ else
+ OUTREGP(R128_CRTC_EXT_CNTL, mask, ~mask);
break;
}
}
diff --git a/src/r128_probe.c b/src/r128_probe.c
index 08b3595a..85ba6416 100644
--- a/src/r128_probe.c
+++ b/src/r128_probe.c
@@ -101,6 +101,8 @@ PciChipsets R128PciChipsets[] = {
{ -1, -1, RES_UNDEFINED }
};
+int gR128EntityIndex = -1;
+
/* Return the options for supported chipset 'n'; NULL otherwise */
const OptionInfoRec *
R128AvailableOptions(int chipid, int busid)
@@ -137,7 +139,6 @@ R128Probe(DriverPtr drv, int flags)
int numDevSections, nATIGDev, nR128GDev;
int *usedChips;
GDevPtr *devSections, *ATIGDevs, *R128GDevs;
- EntityInfoPtr pEnt;
Bool foundScreen = FALSE;
int i;
@@ -183,10 +184,13 @@ R128Probe(DriverPtr drv, int flags)
if (flags & PROBE_DETECT)
foundScreen = TRUE;
else for (i = 0; i < numUsed; i++) {
- pEnt = xf86GetEntityInfo(usedChips[i]);
-
- if (pEnt->active) {
- ScrnInfoPtr pScrn = xf86AllocateScreen(drv, 0);
+ ScrnInfoPtr pScrn;
+ EntityInfoPtr pEnt;
+
+ pScrn = NULL;
+ if((pScrn = xf86ConfigPciEntity(pScrn, 0, usedChips[i],
+ R128PciChipsets, 0, 0, 0, 0, 0)))
+ {
#ifdef XFree86LOADER
@@ -206,11 +210,43 @@ R128Probe(DriverPtr drv, int flags)
foundScreen = TRUE;
- xf86ConfigActivePciEntity(pScrn, usedChips[i], R128PciChipsets,
- 0, 0, 0, 0, 0);
+ pEnt = xf86GetEntityInfo(usedChips[i]);
+
+ /* mobility cards support Dual-Head, mark the entity as sharable*/
+ if(pEnt->chipset == PCI_CHIP_RAGE128LE ||
+ pEnt->chipset == PCI_CHIP_RAGE128LF ||
+ pEnt->chipset == PCI_CHIP_RAGE128MF ||
+ pEnt->chipset == PCI_CHIP_RAGE128ML)
+ {
+ static int instance = 0;
+ DevUnion* pPriv;
+
+ xf86SetEntitySharable(usedChips[i]);
+ xf86SetEntityInstanceForScreen(pScrn,
+ pScrn->entityList[0], instance);
+
+ if(gR128EntityIndex < 0)
+ {
+ gR128EntityIndex = xf86AllocateEntityPrivateIndex();
+ pPriv = xf86GetEntityPrivate(pScrn->entityList[0],
+ gR128EntityIndex);
+
+ if (!pPriv->ptr)
+ {
+ R128EntPtr pR128Ent;
+ pPriv->ptr = xnfcalloc(sizeof(R128EntRec), 1);
+ pR128Ent = pPriv->ptr;
+ pR128Ent->IsDRIEnabled = FALSE;
+ pR128Ent->BypassSecondary = FALSE;
+ pR128Ent->HasSecondary = FALSE;
+ pR128Ent->IsSecondaryRestored = FALSE;
+ }
+ }
+ instance++;
}
xfree(pEnt);
}
+ }
xfree(usedChips);
xfree(devSections);
diff --git a/src/r128_probe.h b/src/r128_probe.h
index 99508fb3..f370c000 100644
--- a/src/r128_probe.h
+++ b/src/r128_probe.h
@@ -39,6 +39,21 @@
#include "xf86str.h"
+typedef struct
+{
+ Bool IsDRIEnabled;
+
+ Bool HasSecondary;
+ Bool BypassSecondary;
+ /*These two registers are used to make sure the CRTC2 is
+ retored before CRTC_EXT, otherwise it could lead to blank screen.*/
+ Bool IsSecondaryRestored;
+ Bool RestorePrimary;
+
+ ScrnInfoPtr pSecondaryScrn;
+ ScrnInfoPtr pPrimaryScrn;
+} R128EntRec, *R128EntPtr;
+
/* r128_probe.c */
extern const OptionInfoRec * R128AvailableOptions(int, int);
extern void R128Identify(int);
diff --git a/src/r128_reg.h b/src/r128_reg.h
index 98b89bfa..31883e3d 100644
--- a/src/r128_reg.h
+++ b/src/r128_reg.h
@@ -76,7 +76,7 @@
#define OUTPLL(addr, val) \
do { \
- OUTREG8(R128_CLOCK_CNTL_INDEX, ((addr) & 0x1f) | R128_PLL_WR_EN); \
+ OUTREG8(R128_CLOCK_CNTL_INDEX, ((addr) & 0x3f) | R128_PLL_WR_EN); \
OUTREG(R128_CLOCK_CNTL_DATA, val); \
} while (0)
@@ -189,6 +189,9 @@
# define R128_BIOS_DISPLAY_FP (1 << 0)
# define R128_BIOS_DISPLAY_CRT (2 << 0)
# define R128_BIOS_DISPLAY_FP_CRT (3 << 0)
+/* R128_DUALHEAD is just a flag for the driver;
+ it doesn't actually correspond to any bits */
+# define R128_DUALHEAD 4
#define R128_BIOS_6_SCRATCH 0x0028
#define R128_BIOS_7_SCRATCH 0x002c
#define R128_BIOS_ROM 0x0f30 /* PCI */
@@ -284,6 +287,7 @@
#define R128_CLOCK_CNTL_INDEX 0x0008
# define R128_PLL_WR_EN (1 << 7)
# define R128_PLL_DIV_SEL (3 << 8)
+# define R128_PLL2_DIV_SEL_MASK ~(3 << 8)
#define R128_CLR_CMP_CLR_3D 0x1a24
#define R128_CLR_CMP_CLR_DST 0x15c8
#define R128_CLR_CMP_CLR_SRC 0x15c4
@@ -374,15 +378,41 @@
#define R128_CRTC2_CRNT_FRAME 0x0314
#define R128_CRTC2_DEBUG 0x031c
#define R128_CRTC2_GEN_CNTL 0x03f8
+# define R128_CRTC2_DBL_SCAN_EN (1 << 0)
+# define R128_CRTC2_CUR_EN (1 << 16)
+# define R128_CRTC2_ICON_EN (1 << 20)
+# define R128_CRTC2_DISP_DIS (1 << 23)
+# define R128_CRTC2_EN (1 << 25)
+# define R128_CRTC2_DISP_REQ_EN_B (1 << 26)
#define R128_CRTC2_GUI_TRIG_VLINE 0x0318
#define R128_CRTC2_H_SYNC_STRT_WID 0x0304
+# define R128_CRTC2_H_SYNC_STRT_PIX (0x07 << 0)
+# define R128_CRTC2_H_SYNC_STRT_CHAR (0x1ff << 3)
+# define R128_CRTC2_H_SYNC_STRT_CHAR_SHIFT 3
+# define R128_CRTC2_H_SYNC_WID (0x3f << 16)
+# define R128_CRTC2_H_SYNC_WID_SHIFT 16
+# define R128_CRTC2_H_SYNC_POL (1 << 23)
#define R128_CRTC2_H_TOTAL_DISP 0x0300
+# define R128_CRTC2_H_TOTAL (0x01ff << 0)
+# define R128_CRTC2_H_TOTAL_SHIFT 0
+# define R128_CRTC2_H_DISP (0x00ff << 16)
+# define R128_CRTC2_H_DISP_SHIFT 16
#define R128_CRTC2_OFFSET 0x0324
#define R128_CRTC2_OFFSET_CNTL 0x0328
+# define R128_CRTC2_TILE_EN (1 << 15)
#define R128_CRTC2_PITCH 0x032c
#define R128_CRTC2_STATUS 0x03fc
#define R128_CRTC2_V_SYNC_STRT_WID 0x030c
+# define R128_CRTC2_V_SYNC_STRT (0x7ff << 0)
+# define R128_CRTC2_V_SYNC_STRT_SHIFT 0
+# define R128_CRTC2_V_SYNC_WID (0x1f << 16)
+# define R128_CRTC2_V_SYNC_WID_SHIFT 16
+# define R128_CRTC2_V_SYNC_POL (1 << 23)
#define R128_CRTC2_V_TOTAL_DISP 0x0308
+# define R128_CRTC2_V_TOTAL (0x07ff << 0)
+# define R128_CRTC2_V_TOTAL_SHIFT 0
+# define R128_CRTC2_V_DISP (0x07ff << 16)
+# define R128_CRTC2_V_DISP_SHIFT 16
#define R128_CRTC2_VLINE_CRNT_VLINE 0x0310
#define R128_CRTC8_DATA 0x03d5 /* VGA, 0x3b5 */
#define R128_CRTC8_IDX 0x03d4 /* VGA, 0x3b4 */
@@ -392,12 +422,19 @@
#define R128_CUR_HORZ_VERT_POSN 0x0264
#define R128_CUR_OFFSET 0x0260
# define R128_CUR_LOCK (1 << 31)
+#define R128_CUR2_CLR0 0x036c
+#define R128_CUR2_CLR1 0x0370
+#define R128_CUR2_HORZ_VERT_OFF 0x0368
+#define R128_CUR2_HORZ_VERT_POSN 0x0364
+#define R128_CUR2_OFFSET 0x0360
+# define R128_CUR2_LOCK (1 << 31)
#define R128_DAC_CNTL 0x0058
# define R128_DAC_RANGE_CNTL (3 << 0)
# define R128_DAC_BLANKING (1 << 2)
# define R128_DAC_CRT_SEL_CRTC2 (1 << 4)
# define R128_DAC_PALETTE_ACC_CTL (1 << 5)
+# define R128_DAC_PALETTE2_SNOOP_EN (1 << 6)
# define R128_DAC_8BIT_EN (1 << 8)
# define R128_DAC_VGA_ADR_EN (1 << 13)
# define R128_DAC_MASK_ALL (0xff << 24)
@@ -408,11 +445,16 @@
#define R128_DAC_W_INDEX 0x03c8 /* VGA */
#define R128_DDA_CONFIG 0x02e0
#define R128_DDA_ON_OFF 0x02e4
+#define R128_DDA2_CONFIG 0x03e0
+#define R128_DDA2_ON_OFF 0x03e4
#define R128_DEFAULT_OFFSET 0x16e0
#define R128_DEFAULT_PITCH 0x16e4
#define R128_DEFAULT_SC_BOTTOM_RIGHT 0x16e8
# define R128_DEFAULT_SC_RIGHT_MAX (0x1fff << 0)
# define R128_DEFAULT_SC_BOTTOM_MAX (0x1fff << 16)
+#define R128_DEFAULT2_OFFSET 0x16f8
+#define R128_DEFAULT2_PITCH 0x16fc
+#define R128_DEFAULT2_SC_BOTTOM_RIGHT 0x16dc
#define R128_DESTINATION_3D_CLR_CMP_VAL 0x1820
#define R128_DESTINATION_3D_CLR_CMP_MSK 0x1824
#define R128_DEVICE_ID 0x0f02 /* PCI */
@@ -670,6 +712,7 @@
#define R128_HOST_DATA_LAST 0x17e0
#define R128_HOST_PATH_CNTL 0x0130
#define R128_HTOTAL_CNTL 0x0009 /* PLL */
+#define R128_HTOTAL2_CNTL 0x002e /* PLL */
#define R128_HW_DEBUG 0x0128
#define R128_HW_DEBUG2 0x011c
@@ -875,6 +918,19 @@
# define R128_PPLL_REF_DIV_MASK 0x03ff
# define R128_PPLL_ATOMIC_UPDATE_R (1 << 15) /* same as _W */
# define R128_PPLL_ATOMIC_UPDATE_W (1 << 15) /* same as _R */
+#define R128_P2PLL_CNTL 0x002a /* P2PLL */
+# define R128_P2PLL_RESET (1 << 0)
+# define R128_P2PLL_SLEEP (1 << 1)
+# define R128_P2PLL_ATOMIC_UPDATE_EN (1 << 16)
+# define R128_P2PLL_VGA_ATOMIC_UPDATE_EN (1 << 17)
+# define R128_P2PLL_ATOMIC_UPDATE_VSYNC (1 << 18)
+#define R128_P2PLL_DIV_0 0x002c
+# define R128_P2PLL_FB0_DIV_MASK 0x07ff
+# define R128_P2PLL_POST0_DIV_MASK 0x00070000
+#define R128_P2PLL_REF_DIV 0x002B /* PLL */
+# define R128_P2PLL_REF_DIV_MASK 0x03ff
+# define R128_P2PLL_ATOMIC_UPDATE_R (1 << 15) /* same as _W */
+# define R128_P2PLL_ATOMIC_UPDATE_W (1 << 15) /* same as _R */
#define R128_PWR_MNGMT_CNTL_STATUS 0x0f60 /* PCI */
#define R128_REG_BASE 0x0f18 /* PCI */
#define R128_REGPROG_INF 0x0f09 /* PCI */
@@ -935,7 +991,14 @@
#define R128_TRAIL_X_SUB 0x1620
#define R128_VCLK_ECP_CNTL 0x0008 /* PLL */
+# define R128_VCLK_SRC_SEL_MASK 0x03
+# define R128_VCLK_SRC_SEL_CPUCLK 0x00
+# define R128_VCLK_SRC_SEL_PPLLCLK 0x03
# define R128_ECP_DIV_MASK (3 << 8)
+#define R128_V2CLK_VCLKTV_CNTL 0x002d /* PLL */
+# define R128_V2CLK_SRC_SEL_MASK 0x03
+# define R128_V2CLK_SRC_SEL_CPUCLK 0x00
+# define R128_V2CLK_SRC_SEL_P2PLLCLK 0x03
#define R128_VENDOR_ID 0x0f00 /* PCI */
#define R128_VGA_DDA_CONFIG 0x02e8
#define R128_VGA_DDA_ON_OFF 0x02ec
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 16:40:39 +0000