| Age | Commit message (Collapse) | Author |
|---|
|
Convert all XAA accel code to use explicit dst and src offset pitch
control to make it work. Use the new drm surface ioctls to set up the
tiled surfaces (if dri is enabled).
|
|
|
|
with DRI support (Bugzilla #2370)
|
|
programs/Xserver/hw/xfree86/drivers/ati/radeon_driver.c
Some of the newer Radeons (R420 for example) have MM_TABLE's with size 0x33
(instead of 0x0c that we know). Furthermore, they lockup during access
of I2C bus !
Add a check to validate MM_TABLE. Note: the check is not more stringent as
other card manufacturers (like Asus or Tekram) might make cards with
slightly different MM_TABLE.
|
|
- formatting cleanup
|
|
|
|
|
|
|
|
|
|
|
|
should now work on ppcs without usefbdev. To use this on ppc make sure
you set "usefbdev" to false. (bug 2089)
- Apply Benjamin Herrenschmidt's radeon patches (bug 2064)
|
|
programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c
programs/Xserver/hw/xfree86/drivers/ati/radeon_dri.c
Move DMA robustness fix into radeon_dri.c::RADEONEnterServer() as per
suggestion by Michel Dänzer.
I could not trigger a lockup, even with r300_demo (possibly it has code
that flushes cache inside ?), so this must be good enough..
|
|
programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c
Add DMA robustness fix from Nicolai Haehnle.
TODO: move this fix into DRM driver or other parts of Xserver when R300
support is more stable.
This fix affects only R300 and later variants and results in small slowdown
when using CP acceleration in comparison to the previous version of the
driver.
We are still a lot faster in CP mode than using MMIO register access.
|
|
|
|
programs/Xserver/hw/xfree86/drivers/ati/radeon_render.c
programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c
Make DMA blitting code more robust.
|
|
programs/Xserver/hw/xfree86/drivers/ati/radeon_driver.c
programs/Xserver/hw/xfree86/drivers/ati/radeon_dri.c
Enable DRM support permanently, allowing its use for any CHIP_FAMILY >
R300. Fix bug in naming Mesa3d driver (it was defaulting to r200)
|
|
|
|
programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c
programs/Xserver/hw/xfree86/drivers/ati/radeon_driver.c
programs/Xserver/hw/xfree86/drivers/ati/radeon_dri.c
programs/Xserver/hw/xfree86/drivers/ati/radeon_common.h
programs/Xserver/hw/xfree86/drivers/ati/radeon_version.h Add R300 (and
later) DRM support, protected by X_R300_DRM option.
Note: at the moment this is for 2d support only, if enabled running
glxgears locks up my machine, but DMAForXv=yes works fine.
|
|
|
|
- fix display detection (Hui Yu) bug 1559
- Add new option "BIOSHotkeys" to allow the bios to control output
switching (off by default) bug 2000
- update the savage man page to document the "CrtOnly" option
|
|
memory (a symptom of incompletely coming up from D3 power state), which
fixes some Dell laptops (closes: #1890).
|
|
system memory to video RAM, which should reduce CPU usage especially
with larger videos. Can be disabled via Option "DMAForXv" if there
should be any stability issues, but it's been stable for me during a
week of testing. Based on a patch by Nikolaus Meine
<meine@tnt.uni-hannover.de>. Probably fix endianness issues in some
newer XVideo code, untested.
Also use hostdata blits to transfer RENDER image data to video RAM to avoid
idling the accelerator engine. Increases RENDER performance
significantly for me.
These changes were only tested on an M9 in a Titanium PowerBook but should
work with all Radeons where direct rendering is supported.
|
|
preventing lockups (closes: #1886).
Allow pitches with a granularity of 32, rather than 64, because some
clamshell iBooks have 800-byte pitches. Change Xv allocation
granularity to 8 bytes, rather than 16 bytes, also (closes: #1888).
|
|
stop the engine if we totally fail -- gets rid of serious performance
issues and lockups with r128 DRI.
|
|
|
|
Avoid PIO access on IA64. Some IA64 machine check if legacy ports outside
the VGA range are accessed. The ATi driver however does this to probe
for ISA Mach8/32/64. Since no IA64 has ISA slots this restriction
should not be relevant to the user.
Avoid recursive calls of xf86scanpci(). This function normally detects that
it has been called before by checking if the PCI structure is filled
out. So far if this was not the case (because PCI probing has failed
for some reason) the function is traversed again. With the chipset
specific PCI bus probing this can lead to an endless recursive loop as
the post-probing code calls xf86scanpci() from within this function.
The OS specific PCI code for Linux worked only if bus 0 was populated as it
checked for the presence of /proc/bus/pci/00. Fixed to check for
/proc/bus/pci/<bus_to_look_for> instead.
|
|
factor calculation in panel size derivation in the Radeon driver
(closes: #1881).
|
|
|
|
- make PutVideo() MergedFB aware
|
|
problems'.
|
|
platforms.
Compress all font encodings (Stefan Dirsch).
Fixed warnings.
Turn on forwarding XNSpotLocation event to XIM server in OffTheSpot and
Root mode (bugzilla #1580, James Su).
Added another compose key combination for the Euro symbol (Stefan Dirsch).
Added support for UTF-8 in ja_JP, ko_KR and zh_TW locales (Mike Fabian).
Changed default encoding for ru from KOI8-R to ISO8859-5 (Mike Fabian).
This is the encoding that is also used by glibc. We may break other
libcs - lets see who complains.
Added explanation for DESTDIR to install to a different directory than /.
Added some early bailouts to atiprobe if PCI structure pointer is NULL to
prevent sig11.
XV support doesn't depend on 2D acceleration any more. This patch removes
this limitation from the NSC driver. This is a patch that I have
committed to XFree86 a while ago but never ported over to X.Org.
Matthieu Herrb contributed some build fixes.
Fixing SetDPMSTimers() so that DPMS*Time == 0 disables the appropriate
timer. This takes advantage of the fact that TimerSet() with a timeout
argument 0 behaves like TimerCanel().
Use /dev/xconsole (named pipe) or devpts for system logger (Werner Fink).
Create missing links for backward compatibility to XFree86 (Stefan Dirsch).
Changed comment to mention xorg.
Changed cursor for the 'kill' action from XC_draped_box to XC_Pirate. If
you don't like it we can change it back (original author unkown).
Added 'pic' to the man page rendering command pipeline (Werner Fink).
Added missing return value (Stefan Dirsch, Roland Mainz)
|
|
- Fix EmulateWheelInertia defaults (bug 1115, Andrew Pimlott)
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_driver.c On my Inspiron
8600 both internal and external ports are marked DAC_PRIMARY in BIOS.
So be extra careful - only swap when the first port is not DAC_PRIMARY
|
|
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.c
xc/programs/Xserver/hw/xfree86/drivers/i2c/fi1236.h Squash annoying warning
about fi1236_dump_status
|
|
Added support for IBM space saver keyboard (Stefan Dirsch). Added support
for Cherry CyMotion Master XPress (Marcus Schaefer).
Change order of SetDisplayDevice(), HWRestore(), UnbindGART() and
RestoreBIOSMemSize() to be exactly opposite to the Save procedure in
EnterVT() (Matthias Hopf, Alan Hourihane).
Fix text mode restauration by removing the assumption that the register
which determines which head is programmed is set. to the active head by
the BIOS (Mark Vojkovich).
When I wrote the resource code 5 years ago I made some assumptions which
turned out to be false: I've assumed that the bus number of the PCI
hostbridge would be the PCI bus the bridge links to. This is not
correct. Fixing this assumption is not easy. However I hope that the
attached patch will make the system work regardless as it 'ignores'
host bridges from which the target bus is not known. This should not
matter at all as we really don't care about host bridges (unless we
have bridge specific code which retrieves information about the
bridge).
Fixed server crash on reset when a structure allocated in PreInit() was
freed on CloseScreen().
Fixed ring buffer lock ups that happened because the structure that
contained ringbuffer data was not zeroed after allocation.
Fixed numerous warnings due to signed unsigned comparisons.
programs/Xserver/hw/xfree86/drivers/nv/nv_driver.c:
(NVBacklightEnable): Changed the order in which the sequencer registers
and the backlight control registers are written. The sequencer control
register need to be written first otherwise DPMS screen blanking
produces vertical bars on a mobile device. lib/Xau/Imakefile: Build
libXau static library PIC so it can be linked into toolkits that would
like to wrap its functionality.
|
|
- clean up some old cruft in the savage i2c code
|
|
version called the driver directly and too late.
Unblank secondary screen explicitely. Don't rely on the value read during
register save as the BIOS have blanked the secondary head.
Checking if server isn't switched away before calling sync. Sanity check
for possible bugs in aother areas of the code.
Fixing default amount of of allocated video memory from AGP for i810: Use
16MB if less than 192MB are installed else use 24MB (Matthias Hopf).
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.c Remove redundant
and incorrect line.
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/theatre.h Patch from Matthieu
Herrb - fix compilation with DoLoadableServer=NO
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.c Do not probe for
Rage Theatre if no multimedia table is present and no parameters have
been specified.
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.c This is really
embarassing - I found a part of code that had <cr> at the end of the
lines. I am certain I never saw it before - talk about code rot !
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_mm_i2c.c Remove debugging
statement that cause loading of DLL modules to fail.
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.c Fix compilation
with gcc 3.4.x (patch by Ronny V. Vindenes)
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.[c,h]
xc/programs/Xserver/hw/xfree86/drivers/ati/theatre.c
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_reg.h Port the rest of
GATOS Radeon-specific code. Remove "checkpoint" noise from logs. Test
with AIW Radeon 7500
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon.h
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_driver.c
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.[c,h]
xc/programs/Xserver/hw/xfree86/drivers/ati/theatre.c Detect and initialize
Rage Theatre (RT100)
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/Imakefile
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_reg.h
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.[c,h]
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_vip.c Add VIP bus access
code, hook it into initialization system.
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/theatre*
xc/programs/Xserver/hw/xfree86/drivers/ati/generic_bus.h Add Rage Theatre
(RT100) module code and hook it into the build system
|
|
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon.h
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.c
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_video.h
xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_mm_i2c.c Add code to
access and initialize multimedia i2c bus. Hook it up.
|
|
|
