.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon.man,v 1.0 2003/01/31 23:04:50
.ds q \N'34'
.TH RADEON __drivermansuffix__ __vendorversion__
.SH NAME
radeon \- ATI RADEON video driver
.SH SYNOPSIS
.nf 
.B "Section \*qDevice\*q"
.BI "  Identifier \*q"  devname \*q
.B  "  Driver \*qradeon\*q"
\ \ ...
.B EndSection
.fi 
.SH DESCRIPTION
.B radeon
is a XFree86 driver for ATI RADEON based video cards.  It contains
full support for 8, 15, 16 and 24 bit pixel depths, dual-head setup, 
flat panel, hardware 2D acceleration, hardware 3D acceleration 
(except R300 and IGP series cards), hardware cursor, XV extension, Xinerama extension.
.SH SUPPORTED HARDWARE
The
.B radeon
driver supports PCI and AGP video cards based on the following ATI chips
.TP 12
.B R100
Radeon 7200
.TP 12
.B RV100
Radeon 7000(VE), M6
.TP 12
.B RS100
Radeon IGP320(M) (2D only)
.TP 12
.B RV200
Radeon 7500, M7
.TP 12
.B RS200
Radeon IGP330(M)/IGP340(M) (2D only)
.TP 12
.B RS250
Radeon Mobility 7000 IGP (2D only)
.TP 12
.B R200
Radeon 8500, 9100, FireGL 8800/8700
.TP 12
.B RV250
Radeon 9000, M9
.TP 12
.B RS300
Radeon 9000 IGP (2D only)
.TP 12
.B RV280
Radeon 9200, M9+
.TP 12
.B R300
Radeon 9700PRO/9700/9500PRO/9500, FireGL X1/Z1 (2D only)
.TP 12
.B R350
Radeon 9800PRO (2D only)
.TP 12
.B RV350
Radeon 9600PRO/9600, M10 (2D only)

.SH CONFIGURATION DETAILS
Please refer to XF86Config(__filemansuffix__) for general configuration
details.  This section only covers configuration details specific to this
driver.
.PP 
The driver auto\-detects all device information necessary to initialize
the card.  However, if you have problems with auto\-detection, you can
specify:
.PP 
.RS 4
VideoRam \- in kilobytes
.br 
MemBase  \- physical address of the linear framebuffer
.br 
IOBase   \- physical address of the MMIO registers
.br 
ChipID   \- PCI DEVICE ID
.RE
.PP 
In addition, the following driver
.B Options
are supported:
.TP 
.BI "Option \*qSWcursor\*q \*q" boolean \*q
Selects software cursor.  The default is
.B off.
.TP 
.BI "Option \*qNoAccel\*q \*q" boolean \*q
Enables or disables all hardware acceleration.  
.br
The default is to
.B enable
hardware acceleration.
.TP 
.BI "Option \*qDac6Bit\*q \*q" boolean \*q
Enables or disables the use of 6 bits per color component when in 8 bpp
mode (emulates VGA mode).  By default, all 8 bits per color component
are used.  
.br
The default is
.B off.
.TP 
.BI "Option \*qVideoKey\*q \*q" integer \*q
This overrides the default pixel value for the YUV video overlay key.
.br
The default value is
.B 0x1E.
.TP 
.BI "Option \*qUseFBDev\*q \*q" boolean \*q
Enable or disable use of an OS\-specific framebuffer device interface
(which is not supported on all OSs).  See fbdevhw(__drivermansuffix__)
for further information. 
.br
The default is
.B off.
.TP 
.BI "Option \*qAGPMode\*q \*q" integer \*q
Set AGP data transfer rate.
(used only when DRI is enabled)
.br
1      \-\- x1 (default)
.br
2      \-\- x2
.br
4      \-\- x4
.br
others \-\- invalid
.TP 
.BI "Option \*qAGPFastWrite\*q \*q" boolean \*q
Enable AGP fast write.
.br
(used only when DRI is enabled)
.br
The default is
.B off.
.TP 
.BI "Option \*qForcePCIMode\*q \*q" boolean \*q
Force to use PCI GART for DRI acceleration.
.br
(used only when DRI is enabled)
.br
The default is
.B off.
.TP 
.BI "Option \*qDDCMode\*q \*q" boolean \*q
Force to use the modes queried from the connected monitor.
.br
The default is
.B off.
.TP 
.BI "Option \*qMonitorLayout\*q \*q" string \*q
.br 
This option is used to overwrite the detected monitor types.
This is only required when driver makes a false detection.
The possible monitor types are:
.br 
NONE   \-\- Not connected
.br 
CRT    \-\- Analog CRT monitor
.br 
TMDS   \-\- Desktop flat panel
.br 
LVDS   \-\- Lapto flat panel
.br
This option can be used in following format:
.br
Option "MonitorLayout" "[type on primary], [type on secondary]"
.br
For example, Option "MonitorLayout" "CRT, TMDS"

Primary/Secondary head for dual\-head cards:
.br 
(when only one port is used, it will be treated as the primary regardless)
.br 
.B Primary head:
.br 
DVI port on DVI+VGA cards
.br 
LCD output on laptops
.br 
Internal TMDS prot on DVI+DVI cards
.br 
.B Secondary head:
.br 
VGA port on DVI+VGA cards
.br 
VGA port on laptops
.br 
External TMDS port on DVI+DVI cards

The default value is
.B undefined.
.TP 
.BI "Option \*qCloneMode\*q \*q" "string" \*q
Set the first mode for the secondary head.
It can be different from the modes used for the primary head. If you don't
have this line while clone is on, the modes specified for the primary head
will be used for the secondary head.
.br
For example, Option "CloneMode" "1024x768"
.br
The default value is
.B undefined.
.TP 
.BI "Option \*qCloneHSync\*q \*q" "string" \*q
Set the horizontal sync range for the secondary  monitor. 
It is not required if a DDC\-capable monitor is connected.
.br
For example, Option "CloneHSync" "30.0-86.0"
.br
The default value is
.B undefined.
.TP 
.BI "Option \*qCloneVRefresh\*q \*q" "string" \*q
Set the vertical refresh range for the secondary monitor. 
It is not required if a DDC\-capable monitor is connected.
.br
For example, Option "CloneVRefresh" "50.0-120.0"
.br
The default value is
.B undefined.
.TP 
.BI "Option \*qOverlayOnCRTC2\*q \*q" boolean \*q
Force hardware overlay to clone head.
.br
The default value is
.B off.
.TP 
.BI "Option \*qIgnoreEDID\*q \*q" boolean \*q
Do not use EDID data for mode validation, but DDC is still used
for monitor detection. This is different from NoDDC option.  
.br
The default value is
.B off.
.TP 
.BI "Option \*qPanelOff\*q \*q" boolean \*q
Disable panel output. Only used when clone is enabled.
.br
The default value is
.B off.
.TP 
.BI "Option \*qEnablePageFlip\*q \*q" boolean \*q
Enable page flipping for 3D acceleration. This will increase performance
but not work correctly in some rare cases, hence the default is
.B off.


.SH SEE ALSO
XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__)
.SH AUTHORS
.nf 
Authors include: ...