/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128_driver.c,v 1.88 2004/01/29 02:51:17 dawes Exp $ */ /* * Copyright 1999, 2000 ATI Technologies Inc., Markham, Ontario, * Precision Insight, Inc., Cedar Park, Texas, and * VA Linux Systems Inc., Fremont, California. * * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation on the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial * portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, PRECISION INSIGHT, VA LINUX * SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #ifdef HAVE_CONFIG_H #include "config.h" #endif /* * Authors: * Rickard E. Faith * Kevin E. Martin * Gareth Hughes * * Credits: * * Thanks to Alan Hourihane and SuSE for * providing source code to their 3.3.x Rage 128 driver. Portions of * this file are based on the initialization code for that driver. * * References: * * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April * 1999. * * RAGE 128 Software Development Manual (Technical Reference Manual P/N * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. * * This server does not yet support these XFree86 4.0 features: * DDC1 & DDC2 * shadowfb * overlay planes * * Modified by Marc Aurele La France for ATI driver merge. * * Dualhead support - Alex Deucher */ #include #include /* Driver data structures */ #include "r128.h" #include "r128_probe.h" #include "r128_reg.h" #include "r128_version.h" #ifdef XF86DRI #define _XF86DRI_SERVER_ #include "r128_dri.h" #include "r128_common.h" #include "r128_sarea.h" #endif #include "fb.h" /* colormap initialization */ #include "micmap.h" /* X and server generic header files */ #include "xf86.h" #include "xf86_OSproc.h" #include "xf86RAC.h" #include "xf86Resources.h" #include "xf86cmap.h" #include "xf86xv.h" #include "vbe.h" /* fbdevhw & vgahw */ #ifdef WITH_VGAHW #include "vgaHW.h" #endif #include "fbdevhw.h" #include "dixstruct.h" /* DPMS support. */ #define DPMS_SERVER #include #include "atipciids.h" #include "r128_chipset.h" #ifndef MAX #define MAX(a,b) ((a)>(b)?(a):(b)) #endif #define USE_CRT_ONLY 0 /* Forward definitions for driver functions */ static Bool R128CloseScreen(int scrnIndex, ScreenPtr pScreen); static Bool R128SaveScreen(ScreenPtr pScreen, int mode); static void R128Save(ScrnInfoPtr pScrn); static void R128Restore(ScrnInfoPtr pScrn); static Bool R128ModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode); static void R128DisplayPowerManagementSet(ScrnInfoPtr pScrn, int PowerManagementMode, int flags); static void R128DisplayPowerManagementSetLCD(ScrnInfoPtr pScrn, int PowerManagementMode, int flags); typedef enum { OPTION_NOACCEL, OPTION_SW_CURSOR, OPTION_DAC_6BIT, OPTION_DAC_8BIT, #ifdef XF86DRI OPTION_XV_DMA, OPTION_IS_PCI, OPTION_CCE_PIO, OPTION_NO_SECURITY, OPTION_USEC_TIMEOUT, OPTION_AGP_MODE, OPTION_AGP_SIZE, OPTION_RING_SIZE, OPTION_BUFFER_SIZE, OPTION_PAGE_FLIP, #endif #if USE_CRT_ONLY /* FIXME: Disable CRTOnly until it is tested */ OPTION_CRT, #endif OPTION_DISPLAY, OPTION_PANEL_WIDTH, OPTION_PANEL_HEIGHT, OPTION_PROG_FP_REGS, OPTION_FBDEV, OPTION_VIDEO_KEY, OPTION_SHOW_CACHE, OPTION_VGA_ACCESS } R128Opts; static const OptionInfoRec R128Options[] = { { OPTION_NOACCEL, "NoAccel", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_SW_CURSOR, "SWcursor", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_DAC_6BIT, "Dac6Bit", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_DAC_8BIT, "Dac8Bit", OPTV_BOOLEAN, {0}, TRUE }, #ifdef XF86DRI { OPTION_XV_DMA, "DMAForXv", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_IS_PCI, "ForcePCIMode", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_CCE_PIO, "CCEPIOMode", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_NO_SECURITY, "CCENoSecurity", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_USEC_TIMEOUT, "CCEusecTimeout", OPTV_INTEGER, {0}, FALSE }, { OPTION_AGP_MODE, "AGPMode", OPTV_INTEGER, {0}, FALSE }, { OPTION_AGP_SIZE, "AGPSize", OPTV_INTEGER, {0}, FALSE }, { OPTION_RING_SIZE, "RingSize", OPTV_INTEGER, {0}, FALSE }, { OPTION_BUFFER_SIZE, "BufferSize", OPTV_INTEGER, {0}, FALSE }, { OPTION_PAGE_FLIP, "EnablePageFlip", OPTV_BOOLEAN, {0}, FALSE }, #endif { OPTION_DISPLAY, "Display", OPTV_STRING, {0}, FALSE }, { OPTION_PANEL_WIDTH, "PanelWidth", OPTV_INTEGER, {0}, FALSE }, { OPTION_PANEL_HEIGHT, "PanelHeight", OPTV_INTEGER, {0}, FALSE }, { OPTION_PROG_FP_REGS, "ProgramFPRegs", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_FBDEV, "UseFBDev", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_VIDEO_KEY, "VideoKey", OPTV_INTEGER, {0}, FALSE }, { OPTION_SHOW_CACHE, "ShowCache", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_VGA_ACCESS, "VGAAccess", OPTV_BOOLEAN, {0}, TRUE }, { -1, NULL, OPTV_NONE, {0}, FALSE } }; _X_EXPORT const OptionInfoRec *R128OptionsWeak(void) { return R128Options; } R128RAMRec R128RAM[] = { /* Memory Specifications From RAGE 128 Software Development Manual (Technical Reference Manual P/N SDK-G04000 Rev 0.01), page 3-21. */ { 4, 4, 3, 3, 1, 3, 1, 16, 12, "128-bit SDR SGRAM 1:1" }, { 4, 8, 3, 3, 1, 3, 1, 17, 13, "64-bit SDR SGRAM 1:1" }, { 4, 4, 1, 2, 1, 2, 1, 16, 12, "64-bit SDR SGRAM 2:1" }, { 4, 4, 3, 3, 2, 3, 1, 16, 12, "64-bit DDR SGRAM" }, }; #ifdef WITH_VGAHW static const char *vgahwSymbols[] = { "vgaHWFreeHWRec", "vgaHWGetHWRec", "vgaHWGetIndex", "vgaHWLock", "vgaHWRestore", "vgaHWSave", "vgaHWUnlock", NULL }; #endif static const char *fbdevHWSymbols[] = { "fbdevHWInit", "fbdevHWUseBuildinMode", "fbdevHWGetLineLength", "fbdevHWGetVidmem", "fbdevHWDPMSSet", "fbdevHWDPMSSetWeak", /* colormap */ "fbdevHWLoadPalette", "fbdevHWLoadPaletteWeak", /* ScrnInfo hooks */ "fbdevHWAdjustFrame", "fbdevHWAdjustFrameWeak", "fbdevHWEnterVT", "fbdevHWLeaveVT", "fbdevHWModeInit", "fbdevHWRestore", "fbdevHWSave", "fbdevHWSwitchMode", "fbdevHWSwitchModeWeak", "fbdevHWValidModeWeak", "fbdevHWMapMMIO", "fbdevHWMapVidmem", "fbdevHWUnmapMMIO", "fbdevHWUnmapVidmem", NULL }; static const char *ddcSymbols[] = { "xf86PrintEDID", "xf86DoEDID_DDC1", "xf86DoEDID_DDC2", NULL }; static const char *i2cSymbols[] = { "xf86CreateI2CBusRec", "xf86I2CBusInit", NULL }; static const char *fbSymbols[] = { "fbPictureInit", "fbScreenInit", NULL }; static const char *xaaSymbols[] = { "XAACreateInfoRec", "XAADestroyInfoRec", "XAAInit", NULL }; static const char *ramdacSymbols[] = { "xf86CreateCursorInfoRec", "xf86DestroyCursorInfoRec", "xf86InitCursor", NULL }; #ifdef XF86DRI static const char *drmSymbols[] = { "drmAddBufs", "drmAddMap", "drmAgpAcquire", "drmAgpAlloc", "drmAgpBase", "drmAgpBind", "drmAgpDeviceId", "drmAgpEnable", "drmAgpFree", "drmAgpGetMode", "drmAgpRelease", "drmAgpUnbind", "drmAgpVendorId", "drmAvailable", "drmCommandNone", "drmCommandRead", "drmCommandWrite", "drmCommandWriteRead", "drmCtlInstHandler", "drmCtlUninstHandler", "drmFreeBufs", "drmFreeVersion", "drmGetInterruptFromBusID", "drmGetLibVersion", "drmGetVersion", "drmMap", "drmMapBufs", "drmDMA", "drmScatterGatherAlloc", "drmScatterGatherFree", "drmUnmap", "drmUnmapBufs", NULL }; static const char *driSymbols[] = { "DRICloseScreen", "DRICreateInfoRec", "DRIDestroyInfoRec", "DRIFinishScreenInit", "DRIGetDeviceInfo", "DRIGetSAREAPrivate", "DRILock", "DRIQueryVersion", "DRIScreenInit", "DRIUnlock", "GlxSetVisualConfigs", "DRICreatePCIBusID", NULL }; static const char *driShadowFBSymbols[] = { "ShadowFBInit", NULL }; #endif static const char *vbeSymbols[] = { "VBEInit", "vbeDoEDID", "vbeFree", NULL }; static const char *int10Symbols[] = { "xf86InitInt10", "xf86FreeInt10", "xf86int10Addr", NULL }; void R128LoaderRefSymLists(void) { /* * Tell the loader about symbols from other modules that this module might * refer to. */ xf86LoaderRefSymLists( #ifdef WITH_VGAHW vgahwSymbols, #endif fbSymbols, xaaSymbols, ramdacSymbols, #ifdef XF86DRI drmSymbols, driSymbols, driShadowFBSymbols, #endif fbdevHWSymbols, int10Symbols, vbeSymbols, /* ddcsymbols, */ i2cSymbols, /* shadowSymbols, */ NULL); } #ifdef XFree86LOADER int getR128EntityIndex(void) { int *r128_entity_index = LoaderSymbol("gR128EntityIndex"); if (!r128_entity_index) return -1; else return *r128_entity_index; } #else extern int gR128EntityIndex; int getR128EntityIndex(void) { return gR128EntityIndex; } #endif R128EntPtr R128EntPriv(ScrnInfoPtr pScrn) { DevUnion *pPriv; R128InfoPtr info = R128PTR(pScrn); pPriv = xf86GetEntityPrivate(info->pEnt->index, getR128EntityIndex()); return pPriv->ptr; } /* Allocate our private R128InfoRec. */ static Bool R128GetRec(ScrnInfoPtr pScrn) { if (pScrn->driverPrivate) return TRUE; pScrn->driverPrivate = xnfcalloc(sizeof(R128InfoRec), 1); return TRUE; } /* Free our private R128InfoRec. */ static void R128FreeRec(ScrnInfoPtr pScrn) { if (!pScrn || !pScrn->driverPrivate) return; xfree(pScrn->driverPrivate); pScrn->driverPrivate = NULL; } /* Memory map the MMIO region. Used during pre-init and by R128MapMem, below. */ static Bool R128MapMMIO(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); if (info->FBDev) { info->MMIO = fbdevHWMapMMIO(pScrn); } else { info->MMIO = xf86MapPciMem(pScrn->scrnIndex, VIDMEM_MMIO | VIDMEM_READSIDEEFFECT, info->PciTag, info->MMIOAddr, R128_MMIOSIZE); } if (!info->MMIO) return FALSE; return TRUE; } /* Unmap the MMIO region. Used during pre-init and by R128UnmapMem, below. */ static Bool R128UnmapMMIO(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); if (info->FBDev) fbdevHWUnmapMMIO(pScrn); else { xf86UnMapVidMem(pScrn->scrnIndex, info->MMIO, R128_MMIOSIZE); } info->MMIO = NULL; return TRUE; } /* Memory map the frame buffer. Used by R128MapMem, below. */ static Bool R128MapFB(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); if (info->FBDev) { info->FB = fbdevHWMapVidmem(pScrn); } else { info->FB = xf86MapPciMem(pScrn->scrnIndex, VIDMEM_FRAMEBUFFER, info->PciTag, info->LinearAddr, info->FbMapSize); } if (!info->FB) return FALSE; return TRUE; } /* Unmap the frame buffer. Used by R128UnmapMem, below. */ static Bool R128UnmapFB(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); if (info->FBDev) fbdevHWUnmapVidmem(pScrn); else xf86UnMapVidMem(pScrn->scrnIndex, info->FB, info->FbMapSize); info->FB = NULL; return TRUE; } /* Memory map the MMIO region and the frame buffer. */ static Bool R128MapMem(ScrnInfoPtr pScrn) { if (!R128MapMMIO(pScrn)) return FALSE; if (!R128MapFB(pScrn)) { R128UnmapMMIO(pScrn); return FALSE; } return TRUE; } /* Unmap the MMIO region and the frame buffer. */ static Bool R128UnmapMem(ScrnInfoPtr pScrn) { if (!R128UnmapMMIO(pScrn) || !R128UnmapFB(pScrn)) return FALSE; return TRUE; } /* Read PLL information */ unsigned R128INPLL(ScrnInfoPtr pScrn, int addr) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; OUTREG8(R128_CLOCK_CNTL_INDEX, addr & 0x3f); return INREG(R128_CLOCK_CNTL_DATA); } #if 0 /* Read PAL information (only used for debugging). */ static int R128INPAL(int idx) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; OUTREG(R128_PALETTE_INDEX, idx << 16); return INREG(R128_PALETTE_DATA); } #endif /* Wait for vertical sync. */ void R128WaitForVerticalSync(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; int i; OUTREG(R128_GEN_INT_STATUS, R128_VSYNC_INT_AK); for (i = 0; i < R128_TIMEOUT; i++) { if (INREG(R128_GEN_INT_STATUS) & R128_VSYNC_INT) break; } } /* Blank screen. */ static void R128Blank(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; if(!info->IsSecondary) { switch(info->DisplayType) { case MT_LCD: OUTREGP(R128_LVDS_GEN_CNTL, R128_LVDS_DISPLAY_DIS, ~R128_LVDS_DISPLAY_DIS); break; case MT_CRT: OUTREGP(R128_CRTC_EXT_CNTL, R128_CRTC_DISPLAY_DIS, ~R128_CRTC_DISPLAY_DIS); break; case MT_DFP: OUTREGP(R128_FP_GEN_CNTL, R128_FP_BLANK_DIS, ~R128_FP_BLANK_DIS); break; case MT_NONE: default: break; } } else { OUTREGP(R128_CRTC2_GEN_CNTL, R128_CRTC2_DISP_DIS, ~R128_CRTC2_DISP_DIS); } } /* Unblank screen. */ static void R128Unblank(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; if(!info->IsSecondary) { switch(info->DisplayType) { case MT_LCD: OUTREGP(R128_LVDS_GEN_CNTL, 0, ~R128_LVDS_DISPLAY_DIS); break; case MT_CRT: OUTREGP(R128_CRTC_EXT_CNTL, 0, ~R128_CRTC_DISPLAY_DIS); break; case MT_DFP: OUTREGP(R128_FP_GEN_CNTL, 0, ~R128_FP_BLANK_DIS); break; case MT_NONE: default: break; } } else { switch(info->DisplayType) { case MT_LCD: case MT_DFP: case MT_CRT: OUTREGP(R128_CRTC2_GEN_CNTL, 0, ~R128_CRTC2_DISP_DIS); break; case MT_NONE: default: break; } } } /* Compute log base 2 of val. */ int R128MinBits(int val) { int bits; if (!val) return 1; for (bits = 0; val; val >>= 1, ++bits); return bits; } /* Compute n/d with rounding. */ static int R128Div(int n, int d) { return (n + (d / 2)) / d; } /* Read the Video BIOS block and the FP registers (if applicable). */ static Bool R128GetBIOSParameters(ScrnInfoPtr pScrn, xf86Int10InfoPtr pInt10) { R128InfoPtr info = R128PTR(pScrn); int i; int FPHeader = 0; #define R128_BIOS8(v) (info->VBIOS[v]) #define R128_BIOS16(v) (info->VBIOS[v] | \ (info->VBIOS[(v) + 1] << 8)) #define R128_BIOS32(v) (info->VBIOS[v] | \ (info->VBIOS[(v) + 1] << 8) | \ (info->VBIOS[(v) + 2] << 16) | \ (info->VBIOS[(v) + 3] << 24)) if (!(info->VBIOS = xalloc(R128_VBIOS_SIZE))) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Cannot allocate space for hold Video BIOS!\n"); return FALSE; } if (pInt10) { info->BIOSAddr = pInt10->BIOSseg << 4; (void)memcpy(info->VBIOS, xf86int10Addr(pInt10, info->BIOSAddr), R128_VBIOS_SIZE); } else { xf86ReadPciBIOS(0, info->PciTag, 0, info->VBIOS, R128_VBIOS_SIZE); if (info->VBIOS[0] != 0x55 || info->VBIOS[1] != 0xaa) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Video BIOS not detected in PCI space!\n"); xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Attempting to read Video BIOS from legacy ISA space!\n"); info->BIOSAddr = 0x000c0000; xf86ReadDomainMemory(info->PciTag, info->BIOSAddr, R128_VBIOS_SIZE, info->VBIOS); } } if (info->VBIOS[0] != 0x55 || info->VBIOS[1] != 0xaa) { info->BIOSAddr = 0x00000000; xfree(info->VBIOS); info->VBIOS = NULL; xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Video BIOS not found!\n"); } if(info->HasCRTC2) { if(info->IsSecondary) { /* there may be a way to detect this, for now, just assume second head is CRT */ info->DisplayType = MT_CRT; if(info->DisplayType > MT_NONE) { DevUnion* pPriv; R128EntPtr pR128Ent; pPriv = xf86GetEntityPrivate(pScrn->entityList[0], getR128EntityIndex()); pR128Ent = pPriv->ptr; pR128Ent->HasSecondary = TRUE; } else return FALSE; } else { /* really need some sort of detection here */ if (info->HasPanelRegs) { info->DisplayType = MT_LCD; } else if (info->isDFP) { info->DisplayType = MT_DFP; } else { /*DVI port has no monitor connected, try CRT port. If something on CRT port, treat it as primary*/ if(xf86IsEntityShared(pScrn->entityList[0])) { DevUnion* pPriv; R128EntPtr pR128Ent; pPriv = xf86GetEntityPrivate(pScrn->entityList[0], getR128EntityIndex()); pR128Ent = pPriv->ptr; pR128Ent->BypassSecondary = TRUE; } info->DisplayType = MT_CRT; #if 0 { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No monitor detected!!!\n"); return FALSE; } #endif } } } else { /*Regular Radeon ASIC, only one CRTC, but it could be used for DFP with a DVI output, like AIW board*/ if(info->isDFP) info->DisplayType = MT_DFP; else info->DisplayType = MT_CRT; } xf86DrvMsg(pScrn->scrnIndex, X_INFO, "%s Display == Type %d\n", (info->IsSecondary ? "Secondary" : "Primary"), info->DisplayType); if (info->VBIOS && info->DisplayType == MT_LCD) { info->FPBIOSstart = 0; /* FIXME: There should be direct access to the start of the FP info tables, but until we find out where that offset is stored, we must search for the ATI signature string: "M3 ". */ for (i = 4; i < R128_VBIOS_SIZE-8; i++) { if (R128_BIOS8(i) == 'M' && R128_BIOS8(i+1) == '3' && R128_BIOS8(i+2) == ' ' && R128_BIOS8(i+3) == ' ' && R128_BIOS8(i+4) == ' ' && R128_BIOS8(i+5) == ' ' && R128_BIOS8(i+6) == ' ' && R128_BIOS8(i+7) == ' ') { FPHeader = i-2; break; } } if (!FPHeader) return TRUE; /* Assume that only one panel is attached and supported */ for (i = FPHeader+20; i < FPHeader+84; i += 2) { if (R128_BIOS16(i) != 0) { info->FPBIOSstart = R128_BIOS16(i); break; } } if (!info->FPBIOSstart) return TRUE; if (!info->PanelXRes) info->PanelXRes = R128_BIOS16(info->FPBIOSstart+25); if (!info->PanelYRes) info->PanelYRes = R128_BIOS16(info->FPBIOSstart+27); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Panel size: %dx%d\n", info->PanelXRes, info->PanelYRes); info->PanelPwrDly = R128_BIOS8(info->FPBIOSstart+56); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Panel ID: "); for (i = 1; i <= 24; i++) ErrorF("%c", R128_BIOS8(info->FPBIOSstart+i)); ErrorF("\n"); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Panel Type: "); i = R128_BIOS16(info->FPBIOSstart+29); if (i & 1) ErrorF("Color, "); else ErrorF("Monochrome, "); if (i & 2) ErrorF("Dual(split), "); else ErrorF("Single, "); switch ((i >> 2) & 0x3f) { case 0: ErrorF("STN"); break; case 1: ErrorF("TFT"); break; case 2: ErrorF("Active STN"); break; case 3: ErrorF("EL"); break; case 4: ErrorF("Plasma"); break; default: ErrorF("UNKNOWN"); break; } ErrorF("\n"); if (R128_BIOS8(info->FPBIOSstart+61) & 1) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Panel Interface: LVDS\n"); } else { /* FIXME: Add Non-LVDS flat pael support */ xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Non-LVDS panel interface detected! " "This support is untested and may not " "function properly\n"); } } if (!info->PanelXRes || !info->PanelYRes) { info->HasPanelRegs = FALSE; xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Can't determine panel dimensions, and none specified.\n" "\tDisabling programming of FP registers.\n"); } return TRUE; } /* Read PLL parameters from BIOS block. Default to typical values if there is no BIOS. */ static Bool R128GetPLLParameters(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); R128PLLPtr pll = &info->pll; #if defined(__powerpc__) || defined(__alpha__) /* there is no bios under Linux PowerPC but Open Firmware does set up the PLL registers properly and we can use those to calculate xclk and find the reference divider */ unsigned x_mpll_ref_fb_div; unsigned xclk_cntl; unsigned Nx, M; unsigned PostDivSet[] = {0, 1, 2, 4, 8, 3, 6, 12}; /* Assume REF clock is 2950 (in units of 10khz) */ /* and that all pllclk must be between 125 Mhz and 250Mhz */ pll->reference_freq = 2950; pll->min_pll_freq = 12500; pll->max_pll_freq = 25000; /* need to memory map the io to use INPLL since it has not been done yet at this point in the startup */ R128MapMMIO(pScrn); x_mpll_ref_fb_div = INPLL(pScrn, R128_X_MPLL_REF_FB_DIV); xclk_cntl = INPLL(pScrn, R128_XCLK_CNTL) & 0x7; pll->reference_div = INPLL(pScrn,R128_PPLL_REF_DIV) & R128_PPLL_REF_DIV_MASK; /* unmap it again */ R128UnmapMMIO(pScrn); Nx = (x_mpll_ref_fb_div & 0x00FF00) >> 8; M = (x_mpll_ref_fb_div & 0x0000FF); pll->xclk = R128Div((2 * Nx * pll->reference_freq), (M * PostDivSet[xclk_cntl])); #else /* !defined(__powerpc__) */ if (!info->VBIOS) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Video BIOS not detected, using default PLL parameters!\n"); /* These probably aren't going to work for the card you are using. Specifically, reference freq can be 29.50MHz, 28.63MHz, or 14.32MHz. YMMV. */ pll->reference_freq = 2950; pll->reference_div = 65; pll->min_pll_freq = 12500; pll->max_pll_freq = 25000; pll->xclk = 10300; } else { CARD16 bios_header = R128_BIOS16(0x48); CARD16 pll_info_block = R128_BIOS16(bios_header + 0x30); R128TRACE(("Header at 0x%04x; PLL Information at 0x%04x\n", bios_header, pll_info_block)); pll->reference_freq = R128_BIOS16(pll_info_block + 0x0e); pll->reference_div = R128_BIOS16(pll_info_block + 0x10); pll->min_pll_freq = R128_BIOS32(pll_info_block + 0x12); pll->max_pll_freq = R128_BIOS32(pll_info_block + 0x16); pll->xclk = R128_BIOS16(pll_info_block + 0x08); } #endif /* __powerpc__ */ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "PLL parameters: rf=%d rd=%d min=%d max=%d; xclk=%d\n", pll->reference_freq, pll->reference_div, pll->min_pll_freq, pll->max_pll_freq, pll->xclk); return TRUE; } /* This is called by R128PreInit to set up the default visual. */ static Bool R128PreInitVisual(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); if (!xf86SetDepthBpp(pScrn, 0, 0, 0, (Support24bppFb | Support32bppFb | SupportConvert32to24 ))) return FALSE; switch (pScrn->depth) { case 8: case 15: case 16: case 24: break; default: xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Given depth (%d) is not supported by %s driver\n", pScrn->depth, R128_DRIVER_NAME); return FALSE; } xf86PrintDepthBpp(pScrn); info->fifo_slots = 0; info->pix24bpp = xf86GetBppFromDepth(pScrn, pScrn->depth); info->CurrentLayout.bitsPerPixel = pScrn->bitsPerPixel; info->CurrentLayout.depth = pScrn->depth; info->CurrentLayout.pixel_bytes = pScrn->bitsPerPixel / 8; info->CurrentLayout.pixel_code = (pScrn->bitsPerPixel != 16 ? pScrn->bitsPerPixel : pScrn->depth); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Pixel depth = %d bits stored in %d byte%s (%d bpp pixmaps)\n", pScrn->depth, info->CurrentLayout.pixel_bytes, info->CurrentLayout.pixel_bytes > 1 ? "s" : "", info->pix24bpp); if (!xf86SetDefaultVisual(pScrn, -1)) return FALSE; if (pScrn->depth > 8 && pScrn->defaultVisual != TrueColor) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Default visual (%s) is not supported at depth %d\n", xf86GetVisualName(pScrn->defaultVisual), pScrn->depth); return FALSE; } return TRUE; } /* This is called by R128PreInit to handle all color weight issues. */ static Bool R128PreInitWeight(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); /* Save flag for 6 bit DAC to use for setting CRTC registers. Otherwise use an 8 bit DAC, even if xf86SetWeight sets pScrn->rgbBits to some value other than 8. */ info->dac6bits = FALSE; if (pScrn->depth > 8) { rgb defaultWeight = { 0, 0, 0 }; if (!xf86SetWeight(pScrn, defaultWeight, defaultWeight)) return FALSE; } else { pScrn->rgbBits = 8; if (xf86ReturnOptValBool(info->Options, OPTION_DAC_6BIT, FALSE)) { pScrn->rgbBits = 6; info->dac6bits = TRUE; } } xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Using %d bits per RGB (%d bit DAC)\n", pScrn->rgbBits, info->dac6bits ? 6 : 8); return TRUE; } /* This is called by R128PreInit to handle config file overrides for things like chipset and memory regions. Also determine memory size and type. If memory type ever needs an override, put it in this routine. */ static Bool R128PreInitConfig(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; EntityInfoPtr pEnt = info->pEnt; GDevPtr dev = pEnt->device; int offset = 0; /* RAM Type */ MessageType from; /* Chipset */ from = X_PROBED; if (dev->chipset && *dev->chipset) { info->Chipset = xf86StringToToken(R128Chipsets, dev->chipset); from = X_CONFIG; } else if (dev->chipID >= 0) { info->Chipset = dev->chipID; from = X_CONFIG; } else { info->Chipset = info->PciInfo->chipType; } pScrn->chipset = (char *)xf86TokenToString(R128Chipsets, info->Chipset); if (!pScrn->chipset) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "ChipID 0x%04x is not recognized\n", info->Chipset); return FALSE; } if (info->Chipset < 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Chipset \"%s\" is not recognized\n", pScrn->chipset); return FALSE; } xf86DrvMsg(pScrn->scrnIndex, from, "Chipset: \"%s\" (ChipID = 0x%04x)\n", pScrn->chipset, info->Chipset); /* Framebuffer */ from = X_PROBED; info->LinearAddr = info->PciInfo->memBase[0] & 0xfc000000; pScrn->memPhysBase = info->LinearAddr; if (dev->MemBase) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Linear address override, using 0x%08lx instead of 0x%08lx\n", dev->MemBase, info->LinearAddr); info->LinearAddr = dev->MemBase; from = X_CONFIG; } else if (!info->LinearAddr) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid linear framebuffer address\n"); return FALSE; } xf86DrvMsg(pScrn->scrnIndex, from, "Linear framebuffer at 0x%08lx\n", info->LinearAddr); /* MMIO registers */ from = X_PROBED; info->MMIOAddr = info->PciInfo->memBase[2] & 0xffffff00; if (dev->IOBase) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "MMIO address override, using 0x%08lx instead of 0x%08lx\n", dev->IOBase, info->MMIOAddr); info->MMIOAddr = dev->IOBase; from = X_CONFIG; } else if (!info->MMIOAddr) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid MMIO address\n"); return FALSE; } xf86DrvMsg(pScrn->scrnIndex, from, "MMIO registers at 0x%08lx\n", info->MMIOAddr); /* BIOS */ from = X_PROBED; info->BIOSAddr = info->PciInfo->biosBase & 0xfffe0000; if (dev->BiosBase) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "BIOS address override, using 0x%08lx instead of 0x%08lx\n", dev->BiosBase, info->BIOSAddr); info->BIOSAddr = dev->BiosBase; from = X_CONFIG; } if (info->BIOSAddr) { xf86DrvMsg(pScrn->scrnIndex, from, "BIOS at 0x%08lx\n", info->BIOSAddr); } /* Flat panel (part 1) */ if (xf86GetOptValBool(info->Options, OPTION_PROG_FP_REGS, &info->HasPanelRegs)) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Turned flat panel register programming %s\n", info->HasPanelRegs ? "on" : "off"); xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "\n\nWARNING: Forcing the driver to use/not use the flat panel registers\nmight damage your flat panel. Use at your *OWN* *RISK*.\n\n"); } else { info->isDFP = FALSE; info->isPro2 = FALSE; info->HasCRTC2 = FALSE; switch (info->Chipset) { /* R128 Pro and Pro2 can have DFP, we will deal with it. No support for dual-head/xinerama yet. M3 can also have DFP, no support for now */ case PCI_CHIP_RAGE128TF: case PCI_CHIP_RAGE128TL: case PCI_CHIP_RAGE128TR: /* FIXME: RAGE128 TS/TT/TU are assumed to be PRO2 as all 6 chips came * out at the same time, so are of the same family likely. * This requires confirmation however to be fully correct. * Mike A. Harris */ case PCI_CHIP_RAGE128TS: case PCI_CHIP_RAGE128TT: case PCI_CHIP_RAGE128TU: info->isPro2 = TRUE; /* FIXME: RAGE128 P[ABCEGHIJKLMNOQSTUVWX] are assumed to have DFP * capability, as the comment at the top suggests. * This requires confirmation however to be fully correct. * Mike A. Harris */ case PCI_CHIP_RAGE128PA: case PCI_CHIP_RAGE128PB: case PCI_CHIP_RAGE128PC: case PCI_CHIP_RAGE128PE: case PCI_CHIP_RAGE128PG: case PCI_CHIP_RAGE128PH: case PCI_CHIP_RAGE128PI: case PCI_CHIP_RAGE128PJ: case PCI_CHIP_RAGE128PK: case PCI_CHIP_RAGE128PL: case PCI_CHIP_RAGE128PM: case PCI_CHIP_RAGE128PN: case PCI_CHIP_RAGE128PO: case PCI_CHIP_RAGE128PQ: case PCI_CHIP_RAGE128PS: case PCI_CHIP_RAGE128PT: case PCI_CHIP_RAGE128PU: case PCI_CHIP_RAGE128PV: case PCI_CHIP_RAGE128PW: case PCI_CHIP_RAGE128PX: case PCI_CHIP_RAGE128PD: case PCI_CHIP_RAGE128PF: case PCI_CHIP_RAGE128PP: case PCI_CHIP_RAGE128PR: info->isDFP = TRUE; break; case PCI_CHIP_RAGE128LE: case PCI_CHIP_RAGE128LF: case PCI_CHIP_RAGE128MF: case PCI_CHIP_RAGE128ML: info->HasPanelRegs = TRUE; /* which chips support dualhead? */ info->HasCRTC2 = TRUE; break; case PCI_CHIP_RAGE128RE: case PCI_CHIP_RAGE128RF: case PCI_CHIP_RAGE128RG: case PCI_CHIP_RAGE128RK: case PCI_CHIP_RAGE128RL: case PCI_CHIP_RAGE128SM: /* FIXME: RAGE128 S[EFGHKLN] are assumed to be like the SM above as * all of them are listed as "Rage 128 4x" in ATI docs. * This requires confirmation however to be fully correct. * Mike A. Harris */ case PCI_CHIP_RAGE128SE: case PCI_CHIP_RAGE128SF: case PCI_CHIP_RAGE128SG: case PCI_CHIP_RAGE128SH: case PCI_CHIP_RAGE128SK: case PCI_CHIP_RAGE128SL: case PCI_CHIP_RAGE128SN: default: info->HasPanelRegs = FALSE; break; } } /* Read registers used to determine options */ from = X_PROBED; R128MapMMIO(pScrn); R128MMIO = info->MMIO; if (info->FBDev) pScrn->videoRam = fbdevHWGetVidmem(pScrn) / 1024; else pScrn->videoRam = INREG(R128_CONFIG_MEMSIZE) / 1024; info->MemCntl = INREG(R128_MEM_CNTL); info->BusCntl = INREG(R128_BUS_CNTL); /* On non-flat panel systems, the default is to display to the CRT, and on flat panel systems, the default is to display to the flat panel unless the user explicity chooses otherwise using the "Display" config file setting. BIOS_5_SCRATCH holds the display device on flat panel systems only. */ if (info->HasPanelRegs) { char *Display = xf86GetOptValString(info->Options, OPTION_DISPLAY); if (info->FBDev) xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Option \"Display\" ignored " "(framebuffer device determines display type)\n"); else if (info->IsPrimary || info->IsSecondary) info->BIOSDisplay = R128_DUALHEAD; else if (!Display || !xf86NameCmp(Display, "FP")) info->BIOSDisplay = R128_BIOS_DISPLAY_FP; else if (!xf86NameCmp(Display, "BIOS")) info->BIOSDisplay = INREG8(R128_BIOS_5_SCRATCH); else if (!xf86NameCmp(Display, "Mirror")) info->BIOSDisplay = R128_BIOS_DISPLAY_FP_CRT; else if (!xf86NameCmp(Display, "CRT")) info->BIOSDisplay = R128_BIOS_DISPLAY_CRT; else { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Unsupported type \"%s\" specified for Option \"Display\".\n" "\tSupported types are: " "\"BIOS\", \"Mirror\", \"CRT\" and \"FP\"\n", Display); return FALSE; } } else { info->BIOSDisplay = R128_BIOS_DISPLAY_CRT; } R128MMIO = NULL; R128UnmapMMIO(pScrn); /* RAM */ switch (info->MemCntl & 0x3) { case 0: /* SDR SGRAM 1:1 */ switch (info->Chipset) { case PCI_CHIP_RAGE128TF: case PCI_CHIP_RAGE128TL: case PCI_CHIP_RAGE128TR: case PCI_CHIP_RAGE128LE: case PCI_CHIP_RAGE128LF: case PCI_CHIP_RAGE128MF: case PCI_CHIP_RAGE128ML: case PCI_CHIP_RAGE128RE: case PCI_CHIP_RAGE128RF: case PCI_CHIP_RAGE128RG: offset = 0; break; /* 128-bit SDR SGRAM 1:1 */ case PCI_CHIP_RAGE128RK: case PCI_CHIP_RAGE128RL: case PCI_CHIP_RAGE128SM: default: offset = 1; break; /* 64-bit SDR SGRAM 1:1 */ } break; case 1: offset = 2; break; /* 64-bit SDR SGRAM 2:1 */ case 2: offset = 3; break; /* 64-bit DDR SGRAM */ default: offset = 1; break; /* 64-bit SDR SGRAM 1:1 */ } info->ram = &R128RAM[offset]; if (dev->videoRam) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Video RAM override, using %d kB instead of %d kB\n", dev->videoRam, pScrn->videoRam); from = X_CONFIG; pScrn->videoRam = dev->videoRam; } xf86DrvMsg(pScrn->scrnIndex, from, "VideoRAM: %d kByte (%s)\n", pScrn->videoRam, info->ram->name); if (info->IsPrimary) { pScrn->videoRam /= 2; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Using %dk of videoram for primary head\n", pScrn->videoRam); } if (info->IsSecondary) { pScrn->videoRam /= 2; info->LinearAddr += pScrn->videoRam * 1024; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Using %dk of videoram for secondary head\n", pScrn->videoRam); } pScrn->videoRam &= ~1023; info->FbMapSize = pScrn->videoRam * 1024; /* Flat panel (part 2) */ switch (info->BIOSDisplay) { case R128_DUALHEAD: xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Dual display\n"); break; case R128_BIOS_DISPLAY_FP: xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Using flat panel for display\n"); break; case R128_BIOS_DISPLAY_CRT: xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Using external CRT for display\n"); break; case R128_BIOS_DISPLAY_FP_CRT: xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Using both flat panel and external CRT " "for display\n"); break; } if (info->HasPanelRegs) { /* Panel width/height overrides */ info->PanelXRes = 0; info->PanelYRes = 0; if (xf86GetOptValInteger(info->Options, OPTION_PANEL_WIDTH, &(info->PanelXRes))) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Flat panel width: %d\n", info->PanelXRes); } if (xf86GetOptValInteger(info->Options, OPTION_PANEL_HEIGHT, &(info->PanelYRes))) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Flat panel height: %d\n", info->PanelYRes); } } #ifdef XF86DRI /* DMA for Xv */ info->DMAForXv = xf86ReturnOptValBool(info->Options, OPTION_XV_DMA, FALSE); if (info->DMAForXv) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Will try to use DMA for Xv image transfers\n"); } /* AGP/PCI */ if (xf86ReturnOptValBool(info->Options, OPTION_IS_PCI, FALSE)) { info->IsPCI = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Forced into PCI-only mode\n"); } else { switch (info->Chipset) { case PCI_CHIP_RAGE128LE: case PCI_CHIP_RAGE128RE: case PCI_CHIP_RAGE128RK: case PCI_CHIP_RAGE128PD: case PCI_CHIP_RAGE128PR: case PCI_CHIP_RAGE128PP: info->IsPCI = TRUE; break; case PCI_CHIP_RAGE128LF: case PCI_CHIP_RAGE128MF: case PCI_CHIP_RAGE128ML: case PCI_CHIP_RAGE128PF: case PCI_CHIP_RAGE128RF: case PCI_CHIP_RAGE128RG: case PCI_CHIP_RAGE128RL: case PCI_CHIP_RAGE128SM: case PCI_CHIP_RAGE128TF: case PCI_CHIP_RAGE128TL: case PCI_CHIP_RAGE128TR: /* FIXME: Rage 128 S[EFGHKLN], T[STU], P[ABCEGHIJKLMNOQSTUVWX] are * believed to be AGP, but need confirmation. */ case PCI_CHIP_RAGE128PA: case PCI_CHIP_RAGE128PB: case PCI_CHIP_RAGE128PC: case PCI_CHIP_RAGE128PE: case PCI_CHIP_RAGE128PG: case PCI_CHIP_RAGE128PH: case PCI_CHIP_RAGE128PI: case PCI_CHIP_RAGE128PJ: case PCI_CHIP_RAGE128PK: case PCI_CHIP_RAGE128PL: case PCI_CHIP_RAGE128PM: case PCI_CHIP_RAGE128PN: case PCI_CHIP_RAGE128PO: case PCI_CHIP_RAGE128PQ: case PCI_CHIP_RAGE128PS: case PCI_CHIP_RAGE128PT: case PCI_CHIP_RAGE128PU: case PCI_CHIP_RAGE128PV: case PCI_CHIP_RAGE128PW: case PCI_CHIP_RAGE128PX: case PCI_CHIP_RAGE128TS: case PCI_CHIP_RAGE128TT: case PCI_CHIP_RAGE128TU: case PCI_CHIP_RAGE128SE: case PCI_CHIP_RAGE128SF: case PCI_CHIP_RAGE128SG: case PCI_CHIP_RAGE128SH: case PCI_CHIP_RAGE128SK: case PCI_CHIP_RAGE128SL: case PCI_CHIP_RAGE128SN: default: info->IsPCI = FALSE; break; } } #endif return TRUE; } static Bool R128PreInitDDC(ScrnInfoPtr pScrn, xf86Int10InfoPtr pInt10) { R128InfoPtr info = R128PTR(pScrn); vbeInfoPtr pVbe; if (!xf86LoadSubModule(pScrn, "ddc")) return FALSE; xf86LoaderReqSymLists(ddcSymbols, NULL); #if defined(__powerpc__) || defined(__alpha__) /* Int10 is broken on PPC and some Alphas */ return TRUE; #else if (xf86LoadSubModule(pScrn, "vbe")) { xf86LoaderReqSymLists(vbeSymbols,NULL); pVbe = VBEInit(pInt10,info->pEnt->index); if (!pVbe) return FALSE; xf86SetDDCproperties(pScrn,xf86PrintEDID(vbeDoEDID(pVbe,NULL))); vbeFree(pVbe); return TRUE; } else return FALSE; #endif } /* This is called by R128PreInit to initialize gamma correction. */ static Bool R128PreInitGamma(ScrnInfoPtr pScrn) { Gamma zeros = { 0.0, 0.0, 0.0 }; if (!xf86SetGamma(pScrn, zeros)) return FALSE; return TRUE; } static void R128I2CGetBits(I2CBusPtr b, int *Clock, int *data) { ScrnInfoPtr pScrn = xf86Screens[b->scrnIndex]; R128InfoPtr info = R128PTR(pScrn); unsigned long val; unsigned char *R128MMIO = info->MMIO; /* Get the result. */ val = INREG(info->DDCReg); *Clock = (val & R128_GPIO_MONID_Y_3) != 0; *data = (val & R128_GPIO_MONID_Y_0) != 0; } static void R128I2CPutBits(I2CBusPtr b, int Clock, int data) { ScrnInfoPtr pScrn = xf86Screens[b->scrnIndex]; R128InfoPtr info = R128PTR(pScrn); unsigned long val; unsigned char *R128MMIO = info->MMIO; val = INREG(info->DDCReg) & ~(CARD32)(R128_GPIO_MONID_EN_0 | R128_GPIO_MONID_EN_3); val |= (Clock ? 0:R128_GPIO_MONID_EN_3); val |= (data ? 0:R128_GPIO_MONID_EN_0); OUTREG(info->DDCReg, val); } static Bool R128I2cInit(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); if ( xf86LoadSubModule(pScrn, "i2c") ) xf86LoaderReqSymLists(i2cSymbols,NULL); else{ xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Failed to load i2c module\n"); return FALSE; } info->pI2CBus = xf86CreateI2CBusRec(); if(!info->pI2CBus) return FALSE; info->pI2CBus->BusName = "DDC"; info->pI2CBus->scrnIndex = pScrn->scrnIndex; info->DDCReg = R128_GPIO_MONID; info->pI2CBus->I2CPutBits = R128I2CPutBits; info->pI2CBus->I2CGetBits = R128I2CGetBits; info->pI2CBus->AcknTimeout = 5; if (!xf86I2CBusInit(info->pI2CBus)) { return FALSE; } return TRUE; } /* return TRUE is a DFP is indeed connected to a DVI port */ static Bool R128GetDFPInfo(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); int i; xf86MonPtr MonInfo = NULL; xf86MonPtr ddc; unsigned char *R128MMIO = info->MMIO; if(!R128I2cInit(pScrn)){ xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "I2C initialization failed!\n"); } OUTREG(info->DDCReg, (INREG(info->DDCReg) | R128_GPIO_MONID_MASK_0 | R128_GPIO_MONID_MASK_3)); OUTREG(info->DDCReg, INREG(info->DDCReg) & ~(CARD32)(R128_GPIO_MONID_A_0 | R128_GPIO_MONID_A_3)); MonInfo = xf86DoEDID_DDC2(pScrn->scrnIndex, info->pI2CBus); if(!MonInfo) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No DFP detected\n"); return FALSE; } xf86SetDDCproperties(pScrn, MonInfo); ddc = pScrn->monitor->DDC; for(i=0; i<4; i++) { if((ddc->det_mon[i].type == 0) && (ddc->det_mon[i].section.d_timings.h_active > 0) && (ddc->det_mon[i].section.d_timings.v_active > 0)) { info->PanelXRes = ddc->det_mon[i].section.d_timings.h_active; info->PanelYRes = ddc->det_mon[i].section.d_timings.v_active; info->HOverPlus = ddc->det_mon[i].section.d_timings.h_sync_off; info->HSyncWidth = ddc->det_mon[i].section.d_timings.h_sync_width; info->HBlank = ddc->det_mon[i].section.d_timings.h_blanking; info->VOverPlus = ddc->det_mon[i].section.d_timings.v_sync_off; info->VSyncWidth = ddc->det_mon[i].section.d_timings.v_sync_width; info->VBlank = ddc->det_mon[i].section.d_timings.v_blanking; } } return TRUE; } static void R128SetSyncRangeFromEdid(ScrnInfoPtr pScrn, int flag) { int i; xf86MonPtr ddc = pScrn->monitor->DDC; if(flag) /*HSync*/ { for(i=0; i<4; i++) { if(ddc->det_mon[i].type == DS_RANGES) { pScrn->monitor->nHsync = 1; pScrn->monitor->hsync[0].lo = ddc->det_mon[i].section.ranges.min_h; pScrn->monitor->hsync[0].hi = ddc->det_mon[i].section.ranges.max_h; return; } } /*if no sync ranges detected in detailed timing table, let's try to derive them from supported VESA modes Are we doing too much here!!!? **/ i = 0; if(ddc->timings1.t1 & 0x02) /*800x600@56*/ { pScrn->monitor->hsync[i].lo = pScrn->monitor->hsync[i].hi = 35.2; i++; } if(ddc->timings1.t1 & 0x04) /*640x480@75*/ { pScrn->monitor->hsync[i].lo = pScrn->monitor->hsync[i].hi = 37.5; i++; } if((ddc->timings1.t1 & 0x08) || (ddc->timings1.t1 & 0x01)) { pScrn->monitor->hsync[i].lo = pScrn->monitor->hsync[i].hi = 37.9; i++; } if(ddc->timings1.t2 & 0x40) { pScrn->monitor->hsync[i].lo = pScrn->monitor->hsync[i].hi = 46.9; i++; } if((ddc->timings1.t2 & 0x80) || (ddc->timings1.t2 & 0x08)) { pScrn->monitor->hsync[i].lo = pScrn->monitor->hsync[i].hi = 48.1; i++; } if(ddc->timings1.t2 & 0x04) { pScrn->monitor->hsync[i].lo = pScrn->monitor->hsync[i].hi = 56.5; i++; } if(ddc->timings1.t2 & 0x02) { pScrn->monitor->hsync[i].lo = pScrn->monitor->hsync[i].hi = 60.0; i++; } if(ddc->timings1.t2 & 0x01) { pScrn->monitor->hsync[i].lo = pScrn->monitor->hsync[i].hi = 64.0; i++; } pScrn->monitor->nHsync = i; } else /*Vrefresh*/ { for(i=0; i<4; i++) { if(ddc->det_mon[i].type == DS_RANGES) { pScrn->monitor->nVrefresh = 1; pScrn->monitor->vrefresh[0].lo = ddc->det_mon[i].section.ranges.min_v; pScrn->monitor->vrefresh[0].hi = ddc->det_mon[i].section.ranges.max_v; return; } } i = 0; if(ddc->timings1.t1 & 0x02) /*800x600@56*/ { pScrn->monitor->vrefresh[i].lo = pScrn->monitor->vrefresh[i].hi = 56; i++; } if((ddc->timings1.t1 & 0x01) || (ddc->timings1.t2 & 0x08)) { pScrn->monitor->vrefresh[i].lo = pScrn->monitor->vrefresh[i].hi = 60; i++; } if(ddc->timings1.t2 & 0x04) { pScrn->monitor->vrefresh[i].lo = pScrn->monitor->vrefresh[i].hi = 70; i++; } if((ddc->timings1.t1 & 0x08) || (ddc->timings1.t2 & 0x80)) { pScrn->monitor->vrefresh[i].lo = pScrn->monitor->vrefresh[i].hi = 72; i++; } if((ddc->timings1.t1 & 0x04) || (ddc->timings1.t2 & 0x40) || (ddc->timings1.t2 & 0x02) || (ddc->timings1.t2 & 0x01)) { pScrn->monitor->vrefresh[i].lo = pScrn->monitor->vrefresh[i].hi = 75; i++; } pScrn->monitor->nVrefresh = i; } } /*********** xfree's xf86ValidateModes routine deosn't work well with DFPs here is our own validation routine. All modes between 640<=XRes<=MaxRes and 480<=YRes<=MaxYRes will be permitted. NOTE: RageProII doesn't support rmx, can only work with the standard modes the monitor can support (scale). ************/ static int R128ValidateFPModes(ScrnInfoPtr pScrn) { int i, j, count=0, width, height; R128InfoPtr info = R128PTR(pScrn); DisplayModePtr last = NULL, new = NULL, first = NULL; xf86MonPtr ddc; /* Free any allocated modes during configuration. We don't need them*/ while (pScrn->modes) { xf86DeleteMode(&pScrn->modes, pScrn->modes); } while (pScrn->modePool) { xf86DeleteMode(&pScrn->modePool, pScrn->modePool); } pScrn->virtualX = pScrn->display->virtualX; pScrn->virtualY = pScrn->display->virtualY; /* If no mode specified in config, we use native resolution*/ if(!pScrn->display->modes[0]) { pScrn->display->modes[0] = xnfalloc(16); sprintf(pScrn->display->modes[0], "%dx%d", info->PanelXRes, info->PanelYRes); } for(i=0; pScrn->display->modes[i] != NULL; i++) { if (sscanf(pScrn->display->modes[i], "%dx%d", &width, &height) == 2) { if(width < 640 || width > info->PanelXRes || height < 480 || height > info->PanelYRes) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Mode %s is out of range.\n" "Valid mode should be between 640x480-%dx%d\n", pScrn->display->modes[i], info->PanelXRes, info->PanelYRes); continue; } new = xnfcalloc(1, sizeof(DisplayModeRec)); new->prev = last; new->name = xnfalloc(strlen(pScrn->display->modes[i]) + 1); strcpy(new->name, pScrn->display->modes[i]); new->HDisplay = new->CrtcHDisplay = width; new->VDisplay = new->CrtcVDisplay = height; ddc = pScrn->monitor->DDC; for(j=0; jdet_mon[j].type == 0){ new->Clock = ddc->det_mon[j].section.d_timings.clock / 1000; break; } } if(new->prev) new->prev->next = new; last = new; if(!first) first = new; pScrn->display->virtualX = pScrn->virtualX = MAX(pScrn->virtualX, width); pScrn->display->virtualY = pScrn->virtualY = MAX(pScrn->virtualY, height); count++; } else { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Mode name %s is invalid\n", pScrn->display->modes[i]); continue; } } if(last) { last->next = first; first->prev = last; pScrn->modes = first; /*FIXME: May need to validate line pitch here*/ { int dummy = 0; switch(pScrn->depth / 8) { case 1: dummy = 128 - pScrn->virtualX % 128; break; case 2: dummy = 32 - pScrn->virtualX % 32; break; case 3: case 4: dummy = 16 - pScrn->virtualX % 16; } pScrn->displayWidth = pScrn->virtualX + dummy; } } return count; } /* This is called by R128PreInit to validate modes and compute parameters for all of the valid modes. */ static Bool R128PreInitModes(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); ClockRangePtr clockRanges; int modesFound; if(info->isDFP) { R128MapMem(pScrn); info->BIOSDisplay = R128_BIOS_DISPLAY_FP; /* validate if DFP really connected. */ if(!R128GetDFPInfo(pScrn)) { info->isDFP = FALSE; info->BIOSDisplay = R128_BIOS_DISPLAY_CRT; } else if(!info->isPro2) { /* RageProII doesn't support rmx, we can't use native-mode stretching for other non-native modes. It will rely on whatever VESA modes monitor can support. */ modesFound = R128ValidateFPModes(pScrn); if(modesFound < 1) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid mode found for this DFP/LCD\n"); R128UnmapMem(pScrn); return FALSE; } } R128UnmapMem(pScrn); } if(!info->isDFP || info->isPro2) { /* Get mode information */ pScrn->progClock = TRUE; clockRanges = xnfcalloc(sizeof(*clockRanges), 1); clockRanges->next = NULL; clockRanges->minClock = info->pll.min_pll_freq; clockRanges->maxClock = info->pll.max_pll_freq * 10; clockRanges->clockIndex = -1; if (info->HasPanelRegs || info->isDFP) { clockRanges->interlaceAllowed = FALSE; clockRanges->doubleScanAllowed = FALSE; } else { clockRanges->interlaceAllowed = TRUE; clockRanges->doubleScanAllowed = TRUE; } if(pScrn->monitor->DDC) { /*if we still don't know sync range yet, let's try EDID. Note that, since we can have dual heads, the Xconfigurator may not be able to probe both monitors correctly through vbe probe function (R128ProbeDDC). Here we provide an additional way to auto-detect sync ranges if they haven't been added to XF86Config manually. **/ if(pScrn->monitor->nHsync <= 0) R128SetSyncRangeFromEdid(pScrn, 1); if(pScrn->monitor->nVrefresh <= 0) R128SetSyncRangeFromEdid(pScrn, 0); } modesFound = xf86ValidateModes(pScrn, pScrn->monitor->Modes, pScrn->display->modes, clockRanges, NULL, /* linePitches */ 8 * 64, /* minPitch */ 8 * 1024, /* maxPitch */ /* * ATI docs say pitchInc must be 8 * 64, but this doesn't permit a pitch of * 800 bytes, which is known to work on the Rage128 LF on clamshell iBooks */ 8 * 32, /* pitchInc */ 128, /* minHeight */ 2048, /* maxHeight */ pScrn->display->virtualX, pScrn->display->virtualY, info->FbMapSize, LOOKUP_BEST_REFRESH); if (modesFound < 1 && info->FBDev) { fbdevHWUseBuildinMode(pScrn); pScrn->displayWidth = fbdevHWGetLineLength(pScrn)/(pScrn->bitsPerPixel/8); modesFound = 1; } if (modesFound == -1) return FALSE; xf86PruneDriverModes(pScrn); if (!modesFound || !pScrn->modes) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid modes found\n"); return FALSE; } xf86SetCrtcForModes(pScrn, 0); } /* Set DPI */ pScrn->currentMode = pScrn->modes; xf86PrintModes(pScrn); xf86SetDpi(pScrn, 0, 0); /* Get ScreenInit function */ if (!xf86LoadSubModule(pScrn, "fb")) return FALSE; xf86LoaderReqSymLists(fbSymbols, NULL); info->CurrentLayout.displayWidth = pScrn->displayWidth; info->CurrentLayout.mode = pScrn->currentMode; return TRUE; } /* This is called by R128PreInit to initialize the hardware cursor. */ static Bool R128PreInitCursor(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); if (!xf86ReturnOptValBool(info->Options, OPTION_SW_CURSOR, FALSE)) { if (!xf86LoadSubModule(pScrn, "ramdac")) return FALSE; xf86LoaderReqSymLists(ramdacSymbols, NULL); } return TRUE; } /* This is called by R128PreInit to initialize hardware acceleration. */ static Bool R128PreInitAccel(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); if (!xf86ReturnOptValBool(info->Options, OPTION_NOACCEL, FALSE)) { if (!xf86LoadSubModule(pScrn, "xaa")) return FALSE; xf86LoaderReqSymLists(xaaSymbols, NULL); } return TRUE; } static Bool R128PreInitInt10(ScrnInfoPtr pScrn, xf86Int10InfoPtr *ppInt10) { R128InfoPtr info = R128PTR(pScrn); #if 1 && !defined(__alpha__) /* int10 is broken on some Alphas */ if (xf86LoadSubModule(pScrn, "int10")) { xf86LoaderReqSymLists(int10Symbols, NULL); xf86DrvMsg(pScrn->scrnIndex,X_INFO,"initializing int10\n"); *ppInt10 = xf86InitInt10(info->pEnt->index); } #endif return TRUE; } #ifdef XF86DRI static Bool R128PreInitDRI(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); if (xf86ReturnOptValBool(info->Options, OPTION_CCE_PIO, FALSE)) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Forcing CCE into PIO mode\n"); info->CCEMode = R128_DEFAULT_CCE_PIO_MODE; } else { info->CCEMode = R128_DEFAULT_CCE_BM_MODE; } if (xf86ReturnOptValBool(info->Options, OPTION_NO_SECURITY, FALSE)) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "WARNING!!! CCE Security checks disabled!!! **********\n"); info->CCESecure = FALSE; } else { info->CCESecure = TRUE; } info->agpMode = R128_DEFAULT_AGP_MODE; info->agpSize = R128_DEFAULT_AGP_SIZE; info->ringSize = R128_DEFAULT_RING_SIZE; info->bufSize = R128_DEFAULT_BUFFER_SIZE; info->agpTexSize = R128_DEFAULT_AGP_TEX_SIZE; info->CCEusecTimeout = R128_DEFAULT_CCE_TIMEOUT; if (!info->IsPCI) { if (xf86GetOptValInteger(info->Options, OPTION_AGP_MODE, &(info->agpMode))) { if (info->agpMode < 1 || info->agpMode > R128_AGP_MAX_MODE) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Illegal AGP Mode: %d\n", info->agpMode); return FALSE; } xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Using AGP %dx mode\n", info->agpMode); } if (xf86GetOptValInteger(info->Options, OPTION_AGP_SIZE, (int *)&(info->agpSize))) { switch (info->agpSize) { case 4: case 8: case 16: case 32: case 64: case 128: case 256: break; default: xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Illegal AGP size: %d MB\n", info->agpSize); return FALSE; } } if (xf86GetOptValInteger(info->Options, OPTION_RING_SIZE, &(info->ringSize))) { if (info->ringSize < 1 || info->ringSize >= (int)info->agpSize) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Illegal ring buffer size: %d MB\n", info->ringSize); return FALSE; } } if (xf86GetOptValInteger(info->Options, OPTION_BUFFER_SIZE, &(info->bufSize))) { if (info->bufSize < 1 || info->bufSize >= (int)info->agpSize) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Illegal vertex/indirect buffers size: %d MB\n", info->bufSize); return FALSE; } if (info->bufSize > 2) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Illegal vertex/indirect buffers size: %d MB\n", info->bufSize); xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Clamping vertex/indirect buffers size to 2 MB\n"); info->bufSize = 2; } } if (info->ringSize + info->bufSize + info->agpTexSize > (int)info->agpSize) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Buffers are too big for requested AGP space\n"); return FALSE; } info->agpTexSize = info->agpSize - (info->ringSize + info->bufSize); } if (xf86GetOptValInteger(info->Options, OPTION_USEC_TIMEOUT, &(info->CCEusecTimeout))) { /* This option checked by the R128 DRM kernel module */ } if (!xf86LoadSubModule(pScrn, "shadowfb")) { info->allowPageFlip = 0; xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Couldn't load shadowfb module:\n"); } else { xf86LoaderReqSymLists(driShadowFBSymbols, NULL); info->allowPageFlip = xf86ReturnOptValBool(info->Options, OPTION_PAGE_FLIP, FALSE); } xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Page flipping %sabled\n", info->allowPageFlip ? "en" : "dis"); return TRUE; } #endif static void R128ProbeDDC(ScrnInfoPtr pScrn, int indx) { vbeInfoPtr pVbe; if (xf86LoadSubModule(pScrn, "vbe")) { pVbe = VBEInit(NULL,indx); ConfiguredMonitor = vbeDoEDID(pVbe, NULL); vbeFree(pVbe); } } /* R128PreInit is called once at server startup. */ _X_EXPORT Bool R128PreInit(ScrnInfoPtr pScrn, int flags) { R128InfoPtr info; xf86Int10InfoPtr pInt10 = NULL; R128TRACE(("R128PreInit\n")); if (pScrn->numEntities != 1) return FALSE; if (!R128GetRec(pScrn)) return FALSE; info = R128PTR(pScrn); info->IsSecondary = FALSE; info->IsPrimary = FALSE; info->SwitchingMode = FALSE; info->pEnt = xf86GetEntityInfo(pScrn->entityList[0]); if (info->pEnt->location.type != BUS_PCI) goto fail; if(xf86IsEntityShared(pScrn->entityList[0])) { if(xf86IsPrimInitDone(pScrn->entityList[0])) { DevUnion* pPriv; R128EntPtr pR128Ent; info->IsSecondary = TRUE; pPriv = xf86GetEntityPrivate(pScrn->entityList[0], getR128EntityIndex()); pR128Ent = pPriv->ptr; if(pR128Ent->BypassSecondary) return FALSE; pR128Ent->pSecondaryScrn = pScrn; } else { DevUnion* pPriv; R128EntPtr pR128Ent; info->IsPrimary = TRUE; xf86SetPrimInitDone(pScrn->entityList[0]); pPriv = xf86GetEntityPrivate(pScrn->entityList[0], getR128EntityIndex()); pR128Ent = pPriv->ptr; pR128Ent->pPrimaryScrn = pScrn; pR128Ent->IsDRIEnabled = FALSE; pR128Ent->BypassSecondary = FALSE; pR128Ent->HasSecondary = FALSE; pR128Ent->RestorePrimary = FALSE; pR128Ent->IsSecondaryRestored = FALSE; } } if (flags & PROBE_DETECT) { R128ProbeDDC(pScrn, info->pEnt->index); return TRUE; } info->PciInfo = xf86GetPciInfoForEntity(info->pEnt->index); info->PciTag = pciTag(info->PciInfo->bus, info->PciInfo->device, info->PciInfo->func); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "PCI bus %d card %d func %d\n", info->PciInfo->bus, info->PciInfo->device, info->PciInfo->func); if (xf86RegisterResources(info->pEnt->index, 0, ResNone)) goto fail; if (xf86SetOperatingState(resVga, info->pEnt->index, ResUnusedOpr)) goto fail; pScrn->racMemFlags = RAC_FB | RAC_COLORMAP | RAC_VIEWPORT | RAC_CURSOR; pScrn->monitor = pScrn->confScreen->monitor; if (!R128PreInitVisual(pScrn)) goto fail; /* We can't do this until we have a pScrn->display. */ xf86CollectOptions(pScrn, NULL); if (!(info->Options = xalloc(sizeof(R128Options)))) goto fail; memcpy(info->Options, R128Options, sizeof(R128Options)); xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, info->Options); /* By default, don't do VGA IOs on ppc */ #if defined(__powerpc__) || !defined(WITH_VGAHW) info->VGAAccess = FALSE; #else info->VGAAccess = TRUE; #endif #ifdef WITH_VGAHW xf86GetOptValBool(info->Options, OPTION_VGA_ACCESS, &info->VGAAccess); if (info->VGAAccess) { if (!xf86LoadSubModule(pScrn, "vgahw")) info->VGAAccess = FALSE; else { xf86LoaderReqSymLists(vgahwSymbols, NULL); if (!vgaHWGetHWRec(pScrn)) info->VGAAccess = FALSE; } if (!info->VGAAccess) xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Loading VGA module failed," " trying to run without it\n"); } else xf86DrvMsg(pScrn->scrnIndex, X_INFO, "VGAAccess option set to FALSE," " VGA module load skipped\n"); if (info->VGAAccess) vgaHWGetIOBase(VGAHWPTR(pScrn)); #else xf86DrvMsg(pScrn->scrnIndex, X_INFO, "VGAHW support not compiled, VGA " "module load skipped\n"); #endif if (!R128PreInitWeight(pScrn)) goto fail; if(xf86GetOptValInteger(info->Options, OPTION_VIDEO_KEY, &(info->videoKey))) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "video key set to 0x%x\n", info->videoKey); } else { info->videoKey = 0x1E; } if (xf86ReturnOptValBool(info->Options, OPTION_SHOW_CACHE, FALSE)) { info->showCache = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ShowCache enabled\n"); } #ifdef __powerpc__ if (xf86ReturnOptValBool(info->Options, OPTION_FBDEV, TRUE)) #else if (xf86ReturnOptValBool(info->Options, OPTION_FBDEV, FALSE)) #endif { info->FBDev = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Using framebuffer device\n"); } if (info->FBDev) { /* check for linux framebuffer device */ if (!xf86LoadSubModule(pScrn, "fbdevhw")) return FALSE; xf86LoaderReqSymLists(fbdevHWSymbols, NULL); if (!fbdevHWInit(pScrn, info->PciInfo, NULL)) return FALSE; pScrn->SwitchMode = fbdevHWSwitchModeWeak(); pScrn->AdjustFrame = fbdevHWAdjustFrameWeak(); pScrn->ValidMode = fbdevHWValidModeWeak(); } if (!info->FBDev) if (!R128PreInitInt10(pScrn, &pInt10)) goto fail; if (!R128PreInitConfig(pScrn)) goto fail; if (!R128GetBIOSParameters(pScrn, pInt10)) goto fail; if (!R128GetPLLParameters(pScrn)) goto fail; /* Don't fail on this one */ R128PreInitDDC(pScrn, pInt10); if (!R128PreInitGamma(pScrn)) goto fail; if (!R128PreInitModes(pScrn)) goto fail; if (!R128PreInitCursor(pScrn)) goto fail; if (!R128PreInitAccel(pScrn)) goto fail; #ifdef XF86DRI if (!R128PreInitDRI(pScrn)) goto fail; #endif /* Free the video bios (if applicable) */ if (info->VBIOS) { xfree(info->VBIOS); info->VBIOS = NULL; } /* Free int10 info */ if (pInt10) xf86FreeInt10(pInt10); xf86DrvMsg(pScrn->scrnIndex, X_NOTICE, "For information on using the multimedia capabilities\n\tof this" " adapter, please see http://gatos.sf.net.\n"); return TRUE; fail: /* Pre-init failed. */ /* Free the video bios (if applicable) */ if (info->VBIOS) { xfree(info->VBIOS); info->VBIOS = NULL; } /* Free int10 info */ if (pInt10) xf86FreeInt10(pInt10); #ifdef WITH_VGAHW if (info->VGAAccess) vgaHWFreeHWRec(pScrn); #endif R128FreeRec(pScrn); return FALSE; } /* Load a palette. */ static void R128LoadPalette(ScrnInfoPtr pScrn, int numColors, int *indices, LOCO *colors, VisualPtr pVisual) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; int i, j; int idx; unsigned char r, g, b; /* If the second monitor is connected, we also need to deal with the secondary palette*/ if (info->IsSecondary) j = 1; else j = 0; PAL_SELECT(j); /* Select palette 0 (main CRTC) if using FP-enabled chip */ /*if (info->HasPanelRegs || info->isDFP) PAL_SELECT(0);*/ if (info->CurrentLayout.depth == 15) { /* 15bpp mode. This sends 32 values. */ for (i = 0; i < numColors; i++) { idx = indices[i]; r = colors[idx].red; g = colors[idx].green; b = colors[idx].blue; OUTPAL(idx * 8, r, g, b); } } else if (info->CurrentLayout.depth == 16) { /* 16bpp mode. This sends 64 values. */ /* There are twice as many green values as there are values for red and blue. So, we take each red and blue pair, and combine it with each of the two green values. */ for (i = 0; i < numColors; i++) { idx = indices[i]; r = colors[idx / 2].red; g = colors[idx].green; b = colors[idx / 2].blue; OUTPAL(idx * 4, r, g, b); } } else { /* 8bpp mode. This sends 256 values. */ for (i = 0; i < numColors; i++) { idx = indices[i]; r = colors[idx].red; b = colors[idx].blue; g = colors[idx].green; OUTPAL(idx, r, g, b); } } } static void R128BlockHandler(int i, pointer blockData, pointer pTimeout, pointer pReadmask) { ScreenPtr pScreen = screenInfo.screens[i]; ScrnInfoPtr pScrn = xf86Screens[i]; R128InfoPtr info = R128PTR(pScrn); #ifdef XF86DRI if (info->directRenderingEnabled) FLUSH_RING(); #endif pScreen->BlockHandler = info->BlockHandler; (*pScreen->BlockHandler) (i, blockData, pTimeout, pReadmask); pScreen->BlockHandler = R128BlockHandler; if(info->VideoTimerCallback) { (*info->VideoTimerCallback)(pScrn, currentTime.milliseconds); } } /* Called at the start of each server generation. */ _X_EXPORT Bool R128ScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; R128InfoPtr info = R128PTR(pScrn); BoxRec MemBox; int y2; R128TRACE(("R128ScreenInit %x %d\n", pScrn->memPhysBase, pScrn->fbOffset)); #ifdef XF86DRI /* Turn off the CCE for now. */ info->CCEInUse = FALSE; info->indirectBuffer = NULL; #endif if (!R128MapMem(pScrn)) return FALSE; pScrn->fbOffset = 0; if(info->IsSecondary) pScrn->fbOffset = pScrn->videoRam * 1024; #ifdef XF86DRI info->fbX = 0; info->fbY = 0; info->frontOffset = 0; info->frontPitch = pScrn->displayWidth; #endif info->PaletteSavedOnVT = FALSE; R128Save(pScrn); if (info->FBDev) { if (!fbdevHWModeInit(pScrn, pScrn->currentMode)) return FALSE; } else { if (!R128ModeInit(pScrn, pScrn->currentMode)) return FALSE; } R128SaveScreen(pScreen, SCREEN_SAVER_ON); pScrn->AdjustFrame(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0); /* Visual setup */ miClearVisualTypes(); if (!miSetVisualTypes(pScrn->depth, miGetDefaultVisualMask(pScrn->depth), pScrn->rgbBits, pScrn->defaultVisual)) return FALSE; miSetPixmapDepths (); #ifdef XF86DRI /* Setup DRI after visuals have been established, but before fbScreenInit is called. fbScreenInit will eventually call the driver's InitGLXVisuals call back. */ { /* FIXME: When we move to dynamic allocation of back and depth buffers, we will want to revisit the following check for 3 times the virtual size of the screen below. */ int width_bytes = (pScrn->displayWidth * info->CurrentLayout.pixel_bytes); int maxy = info->FbMapSize / width_bytes; if (xf86ReturnOptValBool(info->Options, OPTION_NOACCEL, FALSE)) { xf86DrvMsg(scrnIndex, X_WARNING, "Acceleration disabled, not initializing the DRI\n"); info->directRenderingEnabled = FALSE; } else if (maxy <= pScrn->virtualY * 3) { xf86DrvMsg(scrnIndex, X_WARNING, "Static buffer allocation failed -- " "need at least %d kB video memory\n", (pScrn->displayWidth * pScrn->virtualY * info->CurrentLayout.pixel_bytes * 3 + 1023) / 1024); info->directRenderingEnabled = FALSE; } else { if(info->IsSecondary) info->directRenderingEnabled = FALSE; else { /* Xinerama has sync problem with DRI, disable it for now */ if(xf86IsEntityShared(pScrn->entityList[0])) { info->directRenderingEnabled = FALSE; xf86DrvMsg(scrnIndex, X_WARNING, "Direct Rendering Disabled -- " "Dual-head configuration is not working with DRI " "at present.\nPlease use only one Device/Screen " "section in your XFConfig file.\n"); } else info->directRenderingEnabled = R128DRIScreenInit(pScreen); if(xf86IsEntityShared(pScrn->entityList[0])) { DevUnion* pPriv; R128EntPtr pR128Ent; pPriv = xf86GetEntityPrivate(pScrn->entityList[0], getR128EntityIndex()); pR128Ent = pPriv->ptr; pR128Ent->IsDRIEnabled = info->directRenderingEnabled; } } } } #endif if (!fbScreenInit (pScreen, info->FB, pScrn->virtualX, pScrn->virtualY, pScrn->xDpi, pScrn->yDpi, pScrn->displayWidth, pScrn->bitsPerPixel)) return FALSE; xf86SetBlackWhitePixels(pScreen); if (pScrn->bitsPerPixel > 8) { VisualPtr visual; visual = pScreen->visuals + pScreen->numVisuals; while (--visual >= pScreen->visuals) { if ((visual->class | DynamicClass) == DirectColor) { visual->offsetRed = pScrn->offset.red; visual->offsetGreen = pScrn->offset.green; visual->offsetBlue = pScrn->offset.blue; visual->redMask = pScrn->mask.red; visual->greenMask = pScrn->mask.green; visual->blueMask = pScrn->mask.blue; } } } /* must be after RGB order fixed */ fbPictureInit (pScreen, 0, 0); /* Memory manager setup */ #ifdef XF86DRI if (info->directRenderingEnabled) { FBAreaPtr fbarea; int width_bytes = (pScrn->displayWidth * info->CurrentLayout.pixel_bytes); int cpp = info->CurrentLayout.pixel_bytes; int bufferSize = pScrn->virtualY * width_bytes; int l, total; int scanlines; switch (info->CCEMode) { case R128_DEFAULT_CCE_PIO_MODE: xf86DrvMsg(pScrn->scrnIndex, X_INFO, "CCE in PIO mode\n"); break; case R128_DEFAULT_CCE_BM_MODE: xf86DrvMsg(pScrn->scrnIndex, X_INFO, "CCE in BM mode\n"); break; default: xf86DrvMsg(pScrn->scrnIndex, X_INFO, "CCE in UNKNOWN mode\n"); break; } xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Using %d MB AGP aperture\n", info->agpSize); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Using %d MB for the ring buffer\n", info->ringSize); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Using %d MB for vertex/indirect buffers\n", info->bufSize); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Using %d MB for AGP textures\n", info->agpTexSize); /* Try for front, back, depth, and two framebuffers worth of * pixmap cache. Should be enough for a fullscreen background * image plus some leftovers. */ info->textureSize = info->FbMapSize - 5 * bufferSize; /* If that gives us less than half the available memory, let's * be greedy and grab some more. Sorry, I care more about 3D * performance than playing nicely, and you'll get around a full * framebuffer's worth of pixmap cache anyway. */ if (info->textureSize < (int)info->FbMapSize / 2) { info->textureSize = info->FbMapSize - 4 * bufferSize; } if (info->textureSize > 0) { l = R128MinBits((info->textureSize-1) / R128_NR_TEX_REGIONS); if (l < R128_LOG_TEX_GRANULARITY) l = R128_LOG_TEX_GRANULARITY; /* Round the texture size up to the nearest whole number of * texture regions. Again, be greedy about this, don't * round down. */ info->log2TexGran = l; info->textureSize = (info->textureSize >> l) << l; } else { info->textureSize = 0; } /* Set a minimum usable local texture heap size. This will fit * two 256x256x32bpp textures. */ if (info->textureSize < 512 * 1024) { info->textureOffset = 0; info->textureSize = 0; } total = info->FbMapSize - info->textureSize; scanlines = total / width_bytes; if (scanlines > 8191) scanlines = 8191; /* Recalculate the texture offset and size to accomodate any * rounding to a whole number of scanlines. */ info->textureOffset = scanlines * width_bytes; MemBox.x1 = 0; MemBox.y1 = 0; MemBox.x2 = pScrn->displayWidth; MemBox.y2 = scanlines; if (!xf86InitFBManager(pScreen, &MemBox)) { xf86DrvMsg(scrnIndex, X_ERROR, "Memory manager initialization to (%d,%d) (%d,%d) failed\n", MemBox.x1, MemBox.y1, MemBox.x2, MemBox.y2); return FALSE; } else { int width, height; xf86DrvMsg(scrnIndex, X_INFO, "Memory manager initialized to (%d,%d) (%d,%d)\n", MemBox.x1, MemBox.y1, MemBox.x2, MemBox.y2); if ((fbarea = xf86AllocateOffscreenArea(pScreen, pScrn->displayWidth, 2, 0, NULL, NULL, NULL))) { xf86DrvMsg(scrnIndex, X_INFO, "Reserved area from (%d,%d) to (%d,%d)\n", fbarea->box.x1, fbarea->box.y1, fbarea->box.x2, fbarea->box.y2); } else { xf86DrvMsg(scrnIndex, X_ERROR, "Unable to reserve area\n"); } if (xf86QueryLargestOffscreenArea(pScreen, &width, &height, 0, 0, 0)) { xf86DrvMsg(scrnIndex, X_INFO, "Largest offscreen area available: %d x %d\n", width, height); } } /* Allocate the shared back buffer */ if ((fbarea = xf86AllocateOffscreenArea(pScreen, pScrn->virtualX, pScrn->virtualY, 32, NULL, NULL, NULL))) { xf86DrvMsg(scrnIndex, X_INFO, "Reserved back buffer from (%d,%d) to (%d,%d)\n", fbarea->box.x1, fbarea->box.y1, fbarea->box.x2, fbarea->box.y2); info->backX = fbarea->box.x1; info->backY = fbarea->box.y1; info->backOffset = (fbarea->box.y1 * width_bytes + fbarea->box.x1 * cpp); info->backPitch = pScrn->displayWidth; } else { xf86DrvMsg(scrnIndex, X_ERROR, "Unable to reserve back buffer\n"); info->backX = -1; info->backY = -1; info->backOffset = -1; info->backPitch = -1; } /* Allocate the shared depth buffer */ if ((fbarea = xf86AllocateOffscreenArea(pScreen, pScrn->virtualX, pScrn->virtualY + 1, 32, NULL, NULL, NULL))) { xf86DrvMsg(scrnIndex, X_INFO, "Reserved depth buffer from (%d,%d) to (%d,%d)\n", fbarea->box.x1, fbarea->box.y1, fbarea->box.x2, fbarea->box.y2); info->depthX = fbarea->box.x1; info->depthY = fbarea->box.y1; info->depthOffset = (fbarea->box.y1 * width_bytes + fbarea->box.x1 * cpp); info->depthPitch = pScrn->displayWidth; info->spanOffset = ((fbarea->box.y2 - 1) * width_bytes + fbarea->box.x1 * cpp); xf86DrvMsg(scrnIndex, X_INFO, "Reserved depth span from (%d,%d) offset 0x%x\n", fbarea->box.x1, fbarea->box.y2 - 1, info->spanOffset); } else { xf86DrvMsg(scrnIndex, X_ERROR, "Unable to reserve depth buffer\n"); info->depthX = -1; info->depthY = -1; info->depthOffset = -1; info->depthPitch = -1; info->spanOffset = -1; } xf86DrvMsg(scrnIndex, X_INFO, "Reserved %d kb for textures at offset 0x%x\n", info->textureSize/1024, info->textureOffset); } else #endif { MemBox.x1 = 0; MemBox.y1 = 0; MemBox.x2 = pScrn->displayWidth; y2 = (info->FbMapSize / (pScrn->displayWidth * info->CurrentLayout.pixel_bytes)); /* The acceleration engine uses 14 bit signed coordinates, so we can't have any drawable caches beyond this region. */ if (y2 > 8191) y2 = 8191; MemBox.y2 = y2; if (!xf86InitFBManager(pScreen, &MemBox)) { xf86DrvMsg(scrnIndex, X_ERROR, "Memory manager initialization to (%d,%d) (%d,%d) failed\n", MemBox.x1, MemBox.y1, MemBox.x2, MemBox.y2); return FALSE; } else { int width, height; FBAreaPtr fbarea; xf86DrvMsg(scrnIndex, X_INFO, "Memory manager initialized to (%d,%d) (%d,%d)\n", MemBox.x1, MemBox.y1, MemBox.x2, MemBox.y2); if ((fbarea = xf86AllocateOffscreenArea(pScreen, pScrn->displayWidth, 2, 0, NULL, NULL, NULL))) { xf86DrvMsg(scrnIndex, X_INFO, "Reserved area from (%d,%d) to (%d,%d)\n", fbarea->box.x1, fbarea->box.y1, fbarea->box.x2, fbarea->box.y2); } else { xf86DrvMsg(scrnIndex, X_ERROR, "Unable to reserve area\n"); } if (xf86QueryLargestOffscreenArea(pScreen, &width, &height, 0, 0, 0)) { xf86DrvMsg(scrnIndex, X_INFO, "Largest offscreen area available: %d x %d\n", width, height); } } } /* Acceleration setup */ if (!xf86ReturnOptValBool(info->Options, OPTION_NOACCEL, FALSE)) { if (R128AccelInit(pScreen)) { xf86DrvMsg(scrnIndex, X_INFO, "Acceleration enabled\n"); info->accelOn = TRUE; } else { xf86DrvMsg(scrnIndex, X_ERROR, "Acceleration initialization failed\n"); xf86DrvMsg(scrnIndex, X_INFO, "Acceleration disabled\n"); info->accelOn = FALSE; } } else { xf86DrvMsg(scrnIndex, X_INFO, "Acceleration disabled\n"); info->accelOn = FALSE; } /* DGA setup */ R128DGAInit(pScreen); /* Backing store setup */ miInitializeBackingStore(pScreen); xf86SetBackingStore(pScreen); /* Set Silken Mouse */ xf86SetSilkenMouse(pScreen); /* Cursor setup */ miDCInitialize(pScreen, xf86GetPointerScreenFuncs()); /* Hardware cursor setup */ if (!xf86ReturnOptValBool(info->Options, OPTION_SW_CURSOR, FALSE)) { if (R128CursorInit(pScreen)) { int width, height; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Using hardware cursor (scanline %ld)\n", info->cursor_start / pScrn->displayWidth); if (xf86QueryLargestOffscreenArea(pScreen, &width, &height, 0, 0, 0)) { xf86DrvMsg(scrnIndex, X_INFO, "Largest offscreen area available: %d x %d\n", width, height); } } else { xf86DrvMsg(scrnIndex, X_ERROR, "Hardware cursor initialization failed\n"); xf86DrvMsg(scrnIndex, X_INFO, "Using software cursor\n"); } } else { info->cursor_start = 0; xf86DrvMsg(scrnIndex, X_INFO, "Using software cursor\n"); } /* Colormap setup */ if (!miCreateDefColormap(pScreen)) return FALSE; if (!xf86HandleColormaps(pScreen, 256, info->dac6bits ? 6 : 8, (info->FBDev ? fbdevHWLoadPaletteWeak() : R128LoadPalette), NULL, CMAP_PALETTED_TRUECOLOR | CMAP_RELOAD_ON_MODE_SWITCH #if 0 /* This option messes up text mode! (eich@suse.de) */ | CMAP_LOAD_EVEN_IF_OFFSCREEN #endif )) return FALSE; /* DPMS setup - FIXME: also for mirror mode in non-fbdev case? - Michel */ if (info->FBDev) xf86DPMSInit(pScreen, fbdevHWDPMSSetWeak(), 0); else { if (info->DisplayType == MT_LCD) xf86DPMSInit(pScreen, R128DisplayPowerManagementSetLCD, 0); else xf86DPMSInit(pScreen, R128DisplayPowerManagementSet, 0); } if (!info->IsSecondary) R128InitVideo(pScreen); /* Provide SaveScreen */ pScreen->SaveScreen = R128SaveScreen; /* Wrap CloseScreen */ info->CloseScreen = pScreen->CloseScreen; pScreen->CloseScreen = R128CloseScreen; /* Note unused options */ if (serverGeneration == 1) xf86ShowUnusedOptions(pScrn->scrnIndex, pScrn->options); #ifdef XF86DRI /* DRI finalization */ if (info->directRenderingEnabled) { /* Now that mi, fb, drm and others have done their thing, complete the DRI setup. */ info->directRenderingEnabled = R128DRIFinishScreenInit(pScreen); } if (info->directRenderingEnabled) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Direct rendering enabled\n"); } else { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Direct rendering disabled\n"); } #endif info->BlockHandler = pScreen->BlockHandler; pScreen->BlockHandler = R128BlockHandler; return TRUE; } /* Write common registers (initialized to 0). */ static void R128RestoreCommonRegisters(ScrnInfoPtr pScrn, R128SavePtr restore) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; OUTREG(R128_FP_GEN_CNTL, restore->fp_gen_cntl | R128_FP_BLANK_DIS); OUTREG(R128_OVR_CLR, restore->ovr_clr); OUTREG(R128_OVR_WID_LEFT_RIGHT, restore->ovr_wid_left_right); OUTREG(R128_OVR_WID_TOP_BOTTOM, restore->ovr_wid_top_bottom); OUTREG(R128_OV0_SCALE_CNTL, restore->ov0_scale_cntl); OUTREG(R128_MPP_TB_CONFIG, restore->mpp_tb_config ); OUTREG(R128_MPP_GP_CONFIG, restore->mpp_gp_config ); OUTREG(R128_SUBPIC_CNTL, restore->subpic_cntl); OUTREG(R128_VIPH_CONTROL, restore->viph_control); OUTREG(R128_I2C_CNTL_1, restore->i2c_cntl_1); OUTREG(R128_GEN_INT_CNTL, restore->gen_int_cntl); OUTREG(R128_CAP0_TRIG_CNTL, restore->cap0_trig_cntl); OUTREG(R128_CAP1_TRIG_CNTL, restore->cap1_trig_cntl); OUTREG(R128_BUS_CNTL, restore->bus_cntl); OUTREG(R128_CONFIG_CNTL, restore->config_cntl); } /* Write CRTC registers. */ static void R128RestoreCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr restore) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; OUTREG(R128_CRTC_GEN_CNTL, restore->crtc_gen_cntl); OUTREGP(R128_CRTC_EXT_CNTL, restore->crtc_ext_cntl, R128_CRTC_VSYNC_DIS | R128_CRTC_HSYNC_DIS | R128_CRTC_DISPLAY_DIS); OUTREGP(R128_DAC_CNTL, restore->dac_cntl, R128_DAC_RANGE_CNTL | R128_DAC_BLANKING); OUTREG(R128_CRTC_H_TOTAL_DISP, restore->crtc_h_total_disp); OUTREG(R128_CRTC_H_SYNC_STRT_WID, restore->crtc_h_sync_strt_wid); OUTREG(R128_CRTC_V_TOTAL_DISP, restore->crtc_v_total_disp); OUTREG(R128_CRTC_V_SYNC_STRT_WID, restore->crtc_v_sync_strt_wid); OUTREG(R128_CRTC_OFFSET, restore->crtc_offset); OUTREG(R128_CRTC_OFFSET_CNTL, restore->crtc_offset_cntl); OUTREG(R128_CRTC_PITCH, restore->crtc_pitch); } /* Write CRTC2 registers. */ static void R128RestoreCrtc2Registers(ScrnInfoPtr pScrn, R128SavePtr restore) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; OUTREGP(R128_CRTC2_GEN_CNTL, restore->crtc2_gen_cntl, R128_CRTC2_DISP_DIS); OUTREG(R128_CRTC2_H_TOTAL_DISP, restore->crtc2_h_total_disp); OUTREG(R128_CRTC2_H_SYNC_STRT_WID, restore->crtc2_h_sync_strt_wid); OUTREG(R128_CRTC2_V_TOTAL_DISP, restore->crtc2_v_total_disp); OUTREG(R128_CRTC2_V_SYNC_STRT_WID, restore->crtc2_v_sync_strt_wid); OUTREG(R128_CRTC2_OFFSET, restore->crtc2_offset); OUTREG(R128_CRTC2_OFFSET_CNTL, restore->crtc2_offset_cntl); OUTREG(R128_CRTC2_PITCH, restore->crtc2_pitch); } /* Write flat panel registers */ static void R128RestoreFPRegisters(ScrnInfoPtr pScrn, R128SavePtr restore) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; CARD32 tmp; if (info->BIOSDisplay != R128_DUALHEAD) OUTREG(R128_CRTC2_GEN_CNTL, restore->crtc2_gen_cntl); OUTREG(R128_FP_HORZ_STRETCH, restore->fp_horz_stretch); OUTREG(R128_FP_VERT_STRETCH, restore->fp_vert_stretch); OUTREG(R128_FP_CRTC_H_TOTAL_DISP, restore->fp_crtc_h_total_disp); OUTREG(R128_FP_CRTC_V_TOTAL_DISP, restore->fp_crtc_v_total_disp); OUTREG(R128_FP_H_SYNC_STRT_WID, restore->fp_h_sync_strt_wid); OUTREG(R128_FP_V_SYNC_STRT_WID, restore->fp_v_sync_strt_wid); OUTREG(R128_TMDS_CRC, restore->tmds_crc); OUTREG(R128_FP_PANEL_CNTL, restore->fp_panel_cntl); OUTREG(R128_FP_GEN_CNTL, restore->fp_gen_cntl & ~(CARD32)R128_FP_BLANK_DIS); if(info->isDFP) return; tmp = INREG(R128_LVDS_GEN_CNTL); if ((tmp & (R128_LVDS_ON | R128_LVDS_BLON)) == (restore->lvds_gen_cntl & (R128_LVDS_ON | R128_LVDS_BLON))) { OUTREG(R128_LVDS_GEN_CNTL, restore->lvds_gen_cntl); } else { if (restore->lvds_gen_cntl & (R128_LVDS_ON | R128_LVDS_BLON)) { OUTREG(R128_LVDS_GEN_CNTL, restore->lvds_gen_cntl & (CARD32)~R128_LVDS_BLON); usleep(R128PTR(pScrn)->PanelPwrDly * 1000); OUTREG(R128_LVDS_GEN_CNTL, restore->lvds_gen_cntl); } else { OUTREG(R128_LVDS_GEN_CNTL, restore->lvds_gen_cntl | R128_LVDS_BLON); usleep(R128PTR(pScrn)->PanelPwrDly * 1000); OUTREG(R128_LVDS_GEN_CNTL, restore->lvds_gen_cntl); } } } static void R128PLLWaitForReadUpdateComplete(ScrnInfoPtr pScrn) { while (INPLL(pScrn, R128_PPLL_REF_DIV) & R128_PPLL_ATOMIC_UPDATE_R); } static void R128PLLWriteUpdate(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; while (INPLL(pScrn, R128_PPLL_REF_DIV) & R128_PPLL_ATOMIC_UPDATE_R); OUTPLLP(pScrn, R128_PPLL_REF_DIV, R128_PPLL_ATOMIC_UPDATE_W, ~R128_PPLL_ATOMIC_UPDATE_W); } static void R128PLL2WaitForReadUpdateComplete(ScrnInfoPtr pScrn) { while (INPLL(pScrn, R128_P2PLL_REF_DIV) & R128_P2PLL_ATOMIC_UPDATE_R); } static void R128PLL2WriteUpdate(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; while (INPLL(pScrn, R128_P2PLL_REF_DIV) & R128_P2PLL_ATOMIC_UPDATE_R); OUTPLLP(pScrn, R128_P2PLL_REF_DIV, R128_P2PLL_ATOMIC_UPDATE_W, ~(R128_P2PLL_ATOMIC_UPDATE_W)); } /* Write PLL registers. */ static void R128RestorePLLRegisters(ScrnInfoPtr pScrn, R128SavePtr restore) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; OUTPLLP(pScrn, R128_VCLK_ECP_CNTL, R128_VCLK_SRC_SEL_CPUCLK, ~(R128_VCLK_SRC_SEL_MASK)); OUTPLLP(pScrn, R128_PPLL_CNTL, R128_PPLL_RESET | R128_PPLL_ATOMIC_UPDATE_EN | R128_PPLL_VGA_ATOMIC_UPDATE_EN, ~(R128_PPLL_RESET | R128_PPLL_ATOMIC_UPDATE_EN | R128_PPLL_VGA_ATOMIC_UPDATE_EN)); OUTREGP(R128_CLOCK_CNTL_INDEX, R128_PLL_DIV_SEL, ~(R128_PLL_DIV_SEL)); /* R128PLLWaitForReadUpdateComplete(pScrn);*/ OUTPLLP(pScrn, R128_PPLL_REF_DIV, restore->ppll_ref_div, ~R128_PPLL_REF_DIV_MASK); /* R128PLLWriteUpdate(pScrn); R128PLLWaitForReadUpdateComplete(pScrn);*/ OUTPLLP(pScrn, R128_PPLL_DIV_3, restore->ppll_div_3, ~R128_PPLL_FB3_DIV_MASK); /* R128PLLWriteUpdate(pScrn);*/ OUTPLLP(pScrn, R128_PPLL_DIV_3, restore->ppll_div_3, ~R128_PPLL_POST3_DIV_MASK); R128PLLWriteUpdate(pScrn); R128PLLWaitForReadUpdateComplete(pScrn); OUTPLL(R128_HTOTAL_CNTL, restore->htotal_cntl); /* R128PLLWriteUpdate(pScrn);*/ OUTPLLP(pScrn, R128_PPLL_CNTL, 0, ~(R128_PPLL_RESET | R128_PPLL_SLEEP | R128_PPLL_ATOMIC_UPDATE_EN | R128_PPLL_VGA_ATOMIC_UPDATE_EN)); R128TRACE(("Wrote: 0x%08x 0x%08x 0x%08x (0x%08x)\n", restore->ppll_ref_div, restore->ppll_div_3, restore->htotal_cntl, INPLL(pScrn, R128_PPLL_CNTL))); R128TRACE(("Wrote: rd=%d, fd=%d, pd=%d\n", restore->ppll_ref_div & R128_PPLL_REF_DIV_MASK, restore->ppll_div_3 & R128_PPLL_FB3_DIV_MASK, (restore->ppll_div_3 & R128_PPLL_POST3_DIV_MASK) >> 16)); usleep(5000); /* let the clock lock */ OUTPLLP(pScrn, R128_VCLK_ECP_CNTL, R128_VCLK_SRC_SEL_PPLLCLK, ~(R128_VCLK_SRC_SEL_MASK)); } /* Write PLL2 registers. */ static void R128RestorePLL2Registers(ScrnInfoPtr pScrn, R128SavePtr restore) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; OUTPLLP(pScrn, R128_V2CLK_VCLKTV_CNTL, R128_V2CLK_SRC_SEL_CPUCLK, ~R128_V2CLK_SRC_SEL_MASK); OUTPLLP(pScrn, R128_P2PLL_CNTL, R128_P2PLL_RESET | R128_P2PLL_ATOMIC_UPDATE_EN | R128_P2PLL_VGA_ATOMIC_UPDATE_EN, ~(R128_P2PLL_RESET | R128_P2PLL_ATOMIC_UPDATE_EN | R128_P2PLL_VGA_ATOMIC_UPDATE_EN)); #if 1 OUTREGP(R128_CLOCK_CNTL_INDEX, 0, R128_PLL2_DIV_SEL_MASK); #endif /*R128PLL2WaitForReadUpdateComplete(pScrn);*/ OUTPLLP(pScrn, R128_P2PLL_REF_DIV, restore->p2pll_ref_div, ~R128_P2PLL_REF_DIV_MASK); /* R128PLL2WriteUpdate(pScrn); R128PLL2WaitForReadUpdateComplete(pScrn);*/ OUTPLLP(pScrn, R128_P2PLL_DIV_0, restore->p2pll_div_0, ~R128_P2PLL_FB0_DIV_MASK); /* R128PLL2WriteUpdate(pScrn); R128PLL2WaitForReadUpdateComplete(pScrn);*/ OUTPLLP(pScrn, R128_P2PLL_DIV_0, restore->p2pll_div_0, ~R128_P2PLL_POST0_DIV_MASK); R128PLL2WriteUpdate(pScrn); R128PLL2WaitForReadUpdateComplete(pScrn); OUTPLL(R128_HTOTAL2_CNTL, restore->htotal_cntl2); /* R128PLL2WriteUpdate(pScrn);*/ OUTPLLP(pScrn, R128_P2PLL_CNTL, 0, ~(R128_P2PLL_RESET | R128_P2PLL_SLEEP | R128_P2PLL_ATOMIC_UPDATE_EN | R128_P2PLL_VGA_ATOMIC_UPDATE_EN)); R128TRACE(("Wrote: 0x%08x 0x%08x 0x%08x (0x%08x)\n", restore->p2pll_ref_div, restore->p2pll_div_0, restore->htotal_cntl2, INPLL(pScrn, RADEON_P2PLL_CNTL))); R128TRACE(("Wrote: rd=%d, fd=%d, pd=%d\n", restore->p2pll_ref_div & RADEON_P2PLL_REF_DIV_MASK, restore->p2pll_div_0 & RADEON_P2PLL_FB3_DIV_MASK, (restore->p2pll_div_0 & RADEON_P2PLL_POST3_DIV_MASK) >>16)); usleep(5000); /* Let the clock to lock */ OUTPLLP(pScrn, R128_V2CLK_VCLKTV_CNTL, R128_V2CLK_SRC_SEL_P2PLLCLK, ~R128_V2CLK_SRC_SEL_MASK); } /* Write DDA registers. */ static void R128RestoreDDARegisters(ScrnInfoPtr pScrn, R128SavePtr restore) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; OUTREG(R128_DDA_CONFIG, restore->dda_config); OUTREG(R128_DDA_ON_OFF, restore->dda_on_off); } /* Write DDA registers. */ static void R128RestoreDDA2Registers(ScrnInfoPtr pScrn, R128SavePtr restore) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; OUTREG(R128_DDA2_CONFIG, restore->dda2_config); OUTREG(R128_DDA2_ON_OFF, restore->dda2_on_off); } /* Write palette data. */ static void R128RestorePalette(ScrnInfoPtr pScrn, R128SavePtr restore) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; int i; if (!restore->palette_valid) return; PAL_SELECT(1); OUTPAL_START(0); for (i = 0; i < 256; i++) { R128WaitForFifo(pScrn, 32); /* delay */ OUTPAL_NEXT_CARD32(restore->palette2[i]); } PAL_SELECT(0); OUTPAL_START(0); for (i = 0; i < 256; i++) { R128WaitForFifo(pScrn, 32); /* delay */ OUTPAL_NEXT_CARD32(restore->palette[i]); } } /* Write out state to define a new video mode. */ static void R128RestoreMode(ScrnInfoPtr pScrn, R128SavePtr restore) { R128InfoPtr info = R128PTR(pScrn); DevUnion* pPriv; R128EntPtr pR128Ent; static R128SaveRec restore0; R128TRACE(("R128RestoreMode(%p)\n", restore)); if(!info->HasCRTC2) { R128RestoreCommonRegisters(pScrn, restore); R128RestoreDDARegisters(pScrn, restore); R128RestoreCrtcRegisters(pScrn, restore); if((info->DisplayType == MT_DFP) || (info->DisplayType == MT_LCD)) { R128RestoreFPRegisters(pScrn, restore); } R128RestorePLLRegisters(pScrn, restore); return; } pPriv = xf86GetEntityPrivate(pScrn->entityList[0], getR128EntityIndex()); pR128Ent = pPriv->ptr; /***** When changing mode with Dual-head card (VE/M6), care must be taken for the special order in setting registers. CRTC2 has to be set before changing CRTC_EXT register. In the dual-head setup, X server calls this routine twice with primary and secondary pScrn pointers respectively. The calls can come with different order. Regardless the order of X server issuing the calls, we have to ensure we set registers in the right order!!! Otherwise we may get a blank screen. *****/ if(info->IsSecondary) { if (!pR128Ent->RestorePrimary && !info->SwitchingMode) R128RestoreCommonRegisters(pScrn, restore); R128RestoreDDA2Registers(pScrn, restore); R128RestoreCrtc2Registers(pScrn, restore); R128RestorePLL2Registers(pScrn, restore); if(info->SwitchingMode) return; pR128Ent->IsSecondaryRestored = TRUE; if(pR128Ent->RestorePrimary) { R128InfoPtr info0 = R128PTR(pR128Ent->pPrimaryScrn); pR128Ent->RestorePrimary = FALSE; R128RestoreCrtcRegisters(pScrn, &restore0); if((info0->DisplayType == MT_DFP) || (info0->DisplayType == MT_LCD)) { R128RestoreFPRegisters(pScrn, &restore0); } R128RestorePLLRegisters(pScrn, &restore0); pR128Ent->IsSecondaryRestored = FALSE; } } else { if (!pR128Ent->IsSecondaryRestored) R128RestoreCommonRegisters(pScrn, restore); R128RestoreDDARegisters(pScrn, restore); if(!pR128Ent->HasSecondary || pR128Ent->IsSecondaryRestored || info->SwitchingMode) { pR128Ent->IsSecondaryRestored = FALSE; R128RestoreCrtcRegisters(pScrn, restore); if((info->DisplayType == MT_DFP) || (info->DisplayType == MT_LCD)) { R128RestoreFPRegisters(pScrn, restore); } R128RestorePLLRegisters(pScrn, restore); } else { memcpy(&restore0, restore, sizeof(restore0)); pR128Ent->RestorePrimary = TRUE; } } R128RestorePalette(pScrn, restore); } /* Read common registers. */ static void R128SaveCommonRegisters(ScrnInfoPtr pScrn, R128SavePtr save) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; save->ovr_clr = INREG(R128_OVR_CLR); save->ovr_wid_left_right = INREG(R128_OVR_WID_LEFT_RIGHT); save->ovr_wid_top_bottom = INREG(R128_OVR_WID_TOP_BOTTOM); save->ov0_scale_cntl = INREG(R128_OV0_SCALE_CNTL); save->mpp_tb_config = INREG(R128_MPP_TB_CONFIG); save->mpp_gp_config = INREG(R128_MPP_GP_CONFIG); save->subpic_cntl = INREG(R128_SUBPIC_CNTL); save->viph_control = INREG(R128_VIPH_CONTROL); save->i2c_cntl_1 = INREG(R128_I2C_CNTL_1); save->gen_int_cntl = INREG(R128_GEN_INT_CNTL); save->cap0_trig_cntl = INREG(R128_CAP0_TRIG_CNTL); save->cap1_trig_cntl = INREG(R128_CAP1_TRIG_CNTL); save->bus_cntl = INREG(R128_BUS_CNTL); save->config_cntl = INREG(R128_CONFIG_CNTL); } /* Read CRTC registers. */ static void R128SaveCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr save) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; save->crtc_gen_cntl = INREG(R128_CRTC_GEN_CNTL); save->crtc_ext_cntl = INREG(R128_CRTC_EXT_CNTL); save->dac_cntl = INREG(R128_DAC_CNTL); save->crtc_h_total_disp = INREG(R128_CRTC_H_TOTAL_DISP); save->crtc_h_sync_strt_wid = INREG(R128_CRTC_H_SYNC_STRT_WID); save->crtc_v_total_disp = INREG(R128_CRTC_V_TOTAL_DISP); save->crtc_v_sync_strt_wid = INREG(R128_CRTC_V_SYNC_STRT_WID); save->crtc_offset = INREG(R128_CRTC_OFFSET); save->crtc_offset_cntl = INREG(R128_CRTC_OFFSET_CNTL); save->crtc_pitch = INREG(R128_CRTC_PITCH); } /* Read flat panel registers */ static void R128SaveFPRegisters(ScrnInfoPtr pScrn, R128SavePtr save) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; if (info->BIOSDisplay != R128_DUALHEAD) save->crtc2_gen_cntl = INREG(R128_CRTC2_GEN_CNTL); save->fp_crtc_h_total_disp = INREG(R128_FP_CRTC_H_TOTAL_DISP); save->fp_crtc_v_total_disp = INREG(R128_FP_CRTC_V_TOTAL_DISP); save->fp_gen_cntl = INREG(R128_FP_GEN_CNTL); save->fp_h_sync_strt_wid = INREG(R128_FP_H_SYNC_STRT_WID); save->fp_horz_stretch = INREG(R128_FP_HORZ_STRETCH); save->fp_panel_cntl = INREG(R128_FP_PANEL_CNTL); save->fp_v_sync_strt_wid = INREG(R128_FP_V_SYNC_STRT_WID); save->fp_vert_stretch = INREG(R128_FP_VERT_STRETCH); save->lvds_gen_cntl = INREG(R128_LVDS_GEN_CNTL); save->tmds_crc = INREG(R128_TMDS_CRC); save->tmds_transmitter_cntl = INREG(R128_TMDS_TRANSMITTER_CNTL); } /* Read CRTC2 registers. */ static void R128SaveCrtc2Registers(ScrnInfoPtr pScrn, R128SavePtr save) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; save->crtc2_gen_cntl = INREG(R128_CRTC2_GEN_CNTL); save->crtc2_h_total_disp = INREG(R128_CRTC2_H_TOTAL_DISP); save->crtc2_h_sync_strt_wid = INREG(R128_CRTC2_H_SYNC_STRT_WID); save->crtc2_v_total_disp = INREG(R128_CRTC2_V_TOTAL_DISP); save->crtc2_v_sync_strt_wid = INREG(R128_CRTC2_V_SYNC_STRT_WID); save->crtc2_offset = INREG(R128_CRTC2_OFFSET); save->crtc2_offset_cntl = INREG(R128_CRTC2_OFFSET_CNTL); save->crtc2_pitch = INREG(R128_CRTC2_PITCH); } /* Read PLL registers. */ static void R128SavePLLRegisters(ScrnInfoPtr pScrn, R128SavePtr save) { save->ppll_ref_div = INPLL(pScrn, R128_PPLL_REF_DIV); save->ppll_div_3 = INPLL(pScrn, R128_PPLL_DIV_3); save->htotal_cntl = INPLL(pScrn, R128_HTOTAL_CNTL); R128TRACE(("Read: 0x%08x 0x%08x 0x%08x\n", save->ppll_ref_div, save->ppll_div_3, save->htotal_cntl)); R128TRACE(("Read: rd=%d, fd=%d, pd=%d\n", save->ppll_ref_div & R128_PPLL_REF_DIV_MASK, save->ppll_div_3 & R128_PPLL_FB3_DIV_MASK, (save->ppll_div_3 & R128_PPLL_POST3_DIV_MASK) >> 16)); } /* Read PLL2 registers. */ static void R128SavePLL2Registers(ScrnInfoPtr pScrn, R128SavePtr save) { save->p2pll_ref_div = INPLL(pScrn, R128_P2PLL_REF_DIV); save->p2pll_div_0 = INPLL(pScrn, R128_P2PLL_DIV_0); save->htotal_cntl2 = INPLL(pScrn, R128_HTOTAL2_CNTL); R128TRACE(("Read: 0x%08x 0x%08x 0x%08x\n", save->p2pll_ref_div, save->p2pll_div_0, save->htotal_cntl2)); R128TRACE(("Read: rd=%d, fd=%d, pd=%d\n", save->p2pll_ref_div & R128_P2PLL_REF_DIV_MASK, save->p2pll_div_0 & R128_P2PLL_FB0_DIV_MASK, (save->p2pll_div_0 & R128_P2PLL_POST0_DIV_MASK) >> 16)); } /* Read DDA registers. */ static void R128SaveDDARegisters(ScrnInfoPtr pScrn, R128SavePtr save) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; save->dda_config = INREG(R128_DDA_CONFIG); save->dda_on_off = INREG(R128_DDA_ON_OFF); } /* Read DDA2 registers. */ static void R128SaveDDA2Registers(ScrnInfoPtr pScrn, R128SavePtr save) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; save->dda2_config = INREG(R128_DDA2_CONFIG); save->dda2_on_off = INREG(R128_DDA2_ON_OFF); } /* Read palette data. */ static void R128SavePalette(ScrnInfoPtr pScrn, R128SavePtr save) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; int i; PAL_SELECT(1); INPAL_START(0); for (i = 0; i < 256; i++) save->palette2[i] = INPAL_NEXT(); PAL_SELECT(0); INPAL_START(0); for (i = 0; i < 256; i++) save->palette[i] = INPAL_NEXT(); save->palette_valid = TRUE; } /* Save state that defines current video mode. */ static void R128SaveMode(ScrnInfoPtr pScrn, R128SavePtr save) { R128InfoPtr info = R128PTR(pScrn); R128TRACE(("R128SaveMode(%p)\n", save)); if(info->IsSecondary) { R128SaveCrtc2Registers(pScrn, save); R128SavePLL2Registers(pScrn, save); R128SaveDDA2Registers(pScrn, save); } else { R128SaveCommonRegisters(pScrn, save); R128SaveCrtcRegisters(pScrn, save); if((info->DisplayType == MT_DFP) || (info->DisplayType == MT_LCD)) { R128SaveFPRegisters(pScrn, save); } R128SavePLLRegisters(pScrn, save); R128SaveDDARegisters(pScrn, save); R128SavePalette(pScrn, save); } R128TRACE(("R128SaveMode returns %p\n", save)); } /* Save everything needed to restore the original VC state. */ static void R128Save(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; R128SavePtr save = &info->SavedReg; R128TRACE(("R128Save\n")); if (info->FBDev) { fbdevHWSave(pScrn); return; } if (!info->IsSecondary) { #ifdef WITH_VGAHW if (info->VGAAccess) { vgaHWPtr hwp = VGAHWPTR(pScrn); vgaHWUnlock(hwp); # if defined(__powerpc__) /* temporary hack to prevent crashing on PowerMacs when trying to * read VGA fonts and colormap, will find a better solution * in the future. TODO: Check if there's actually some VGA stuff * setup in the card at all !! */ vgaHWSave(pScrn, &hwp->SavedReg, VGA_SR_MODE); /* Save mode only */ # else /* Save mode * & fonts & cmap */ vgaHWSave(pScrn, &hwp->SavedReg, VGA_SR_MODE | VGA_SR_FONTS); # endif vgaHWLock(hwp); } #endif save->dp_datatype = INREG(R128_DP_DATATYPE); save->gen_reset_cntl = INREG(R128_GEN_RESET_CNTL); save->clock_cntl_index = INREG(R128_CLOCK_CNTL_INDEX); save->amcgpio_en_reg = INREG(R128_AMCGPIO_EN_REG); save->amcgpio_mask = INREG(R128_AMCGPIO_MASK); } R128SaveMode(pScrn, save); } /* Restore the original (text) mode. */ static void R128Restore(ScrnInfoPtr pScrn) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; R128SavePtr restore = &info->SavedReg; R128TRACE(("R128Restore\n")); if (info->FBDev) { fbdevHWRestore(pScrn); return; } R128Blank(pScrn); if (!info->IsSecondary) { OUTREG(R128_AMCGPIO_MASK, restore->amcgpio_mask); OUTREG(R128_AMCGPIO_EN_REG, restore->amcgpio_en_reg); OUTREG(R128_CLOCK_CNTL_INDEX, restore->clock_cntl_index); OUTREG(R128_GEN_RESET_CNTL, restore->gen_reset_cntl); OUTREG(R128_DP_DATATYPE, restore->dp_datatype); } R128RestoreMode(pScrn, restore); #ifdef WITH_VGAHW if (info->VGAAccess) { vgaHWPtr hwp = VGAHWPTR(pScrn); if (!info->IsSecondary) { vgaHWUnlock(hwp); # if defined(__powerpc__) /* Temporary hack to prevent crashing on PowerMacs when trying to * write VGA fonts, will find a better solution in the future */ vgaHWRestore(pScrn, &hwp->SavedReg, VGA_SR_MODE ); # else vgaHWRestore(pScrn, &hwp->SavedReg, VGA_SR_MODE | VGA_SR_FONTS ); # endif vgaHWLock(hwp); } else { R128EntPtr pR128Ent = R128EntPriv(pScrn); ScrnInfoPtr pScrn0 = pR128Ent->pPrimaryScrn; R128InfoPtr info0 = R128PTR(pScrn0); vgaHWPtr hwp0; if (info0->VGAAccess) { hwp0 = VGAHWPTR(pScrn0); vgaHWUnlock(hwp0); #if defined(__powerpc__) vgaHWRestore(pScrn0, &hwp0->SavedReg, VGA_SR_MODE); #else vgaHWRestore(pScrn0, &hwp0->SavedReg, VGA_SR_MODE | VGA_SR_FONTS ); #endif vgaHWLock(hwp0); } } } #endif R128WaitForVerticalSync(pScrn); R128Unblank(pScrn); } /* Define common registers for requested video mode. */ static void R128InitCommonRegisters(R128SavePtr save, R128InfoPtr info) { save->ovr_clr = 0; save->ovr_wid_left_right = 0; save->ovr_wid_top_bottom = 0; save->ov0_scale_cntl = 0; save->mpp_tb_config = 0; save->mpp_gp_config = 0; save->subpic_cntl = 0; save->viph_control = 0; save->i2c_cntl_1 = 0; #ifdef XF86DRI save->gen_int_cntl = info->gen_int_cntl; #else save->gen_int_cntl = 0; #endif save->cap0_trig_cntl = 0; save->cap1_trig_cntl = 0; save->bus_cntl = info->BusCntl; /* * If bursts are enabled, turn on discards and aborts */ if (save->bus_cntl & (R128_BUS_WRT_BURST|R128_BUS_READ_BURST)) save->bus_cntl |= R128_BUS_RD_DISCARD_EN | R128_BUS_RD_ABORT_EN; } /* Define CRTC registers for requested video mode. */ static Bool R128InitCrtcRegisters(ScrnInfoPtr pScrn, R128SavePtr save, DisplayModePtr mode, R128InfoPtr info) { int format; int hsync_start; int hsync_wid; int hsync_fudge; int vsync_wid; int hsync_fudge_default[] = { 0x00, 0x12, 0x09, 0x09, 0x06, 0x05 }; int hsync_fudge_fp[] = { 0x12, 0x11, 0x09, 0x09, 0x05, 0x05 }; int hsync_fudge_fp_crt[] = { 0x12, 0x10, 0x08, 0x08, 0x04, 0x04 }; switch (info->CurrentLayout.pixel_code) { case 4: format = 1; break; case 8: format = 2; break; case 15: format = 3; break; /* 555 */ case 16: format = 4; break; /* 565 */ case 24: format = 5; break; /* RGB */ case 32: format = 6; break; /* xRGB */ default: xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Unsupported pixel depth (%d)\n", info->CurrentLayout.bitsPerPixel); return FALSE; } if ((info->DisplayType == MT_DFP) || (info->DisplayType == MT_LCD)) hsync_fudge = hsync_fudge_fp[format-1]; else hsync_fudge = hsync_fudge_default[format-1]; save->crtc_gen_cntl = (R128_CRTC_EXT_DISP_EN | R128_CRTC_EN | (format << 8) | ((mode->Flags & V_DBLSCAN) ? R128_CRTC_DBL_SCAN_EN : 0) | ((mode->Flags & V_INTERLACE) ? R128_CRTC_INTERLACE_EN : 0) | ((mode->Flags & V_CSYNC) ? R128_CRTC_CSYNC_EN : 0)); if((info->DisplayType == MT_DFP) || (info->DisplayType == MT_LCD)) { save->crtc_ext_cntl = R128_VGA_ATI_LINEAR | R128_XCRT_CNT_EN; save->crtc_gen_cntl &= ~(R128_CRTC_DBL_SCAN_EN | R128_CRTC_INTERLACE_EN); } else save->crtc_ext_cntl = R128_VGA_ATI_LINEAR | R128_XCRT_CNT_EN | R128_CRTC_CRT_ON; save->dac_cntl = (R128_DAC_MASK_ALL | R128_DAC_VGA_ADR_EN | (info->dac6bits ? 0 : R128_DAC_8BIT_EN)); if(info->isDFP && !info->isPro2) { if(info->PanelXRes < mode->CrtcHDisplay) mode->HDisplay = mode->CrtcHDisplay = info->PanelXRes; if(info->PanelYRes < mode->CrtcVDisplay) mode->VDisplay = mode->CrtcVDisplay = info->PanelYRes; mode->CrtcHTotal = mode->CrtcHDisplay + info->HBlank; mode->CrtcHSyncStart = mode->CrtcHDisplay + info->HOverPlus; mode->CrtcHSyncEnd = mode->CrtcHSyncStart + info->HSyncWidth; mode->CrtcVTotal = mode->CrtcVDisplay + info->VBlank; mode->CrtcVSyncStart = mode->CrtcVDisplay + info->VOverPlus; mode->CrtcVSyncEnd = mode->CrtcVSyncStart + info->VSyncWidth; } save->crtc_h_total_disp = ((((mode->CrtcHTotal / 8) - 1) & 0xffff) | (((mode->CrtcHDisplay / 8) - 1) << 16)); hsync_wid = (mode->CrtcHSyncEnd - mode->CrtcHSyncStart) / 8; if (!hsync_wid) hsync_wid = 1; if (hsync_wid > 0x3f) hsync_wid = 0x3f; hsync_start = mode->CrtcHSyncStart - 8 + hsync_fudge; save->crtc_h_sync_strt_wid = ((hsync_start & 0xfff) | (hsync_wid << 16) | ((mode->Flags & V_NHSYNC) ? R128_CRTC_H_SYNC_POL : 0)); #if 1 /* This works for double scan mode. */ save->crtc_v_total_disp = (((mode->CrtcVTotal - 1) & 0xffff) | ((mode->CrtcVDisplay - 1) << 16)); #else /* This is what cce/nbmode.c example code does -- is this correct? */ save->crtc_v_total_disp = (((mode->CrtcVTotal - 1) & 0xffff) | ((mode->CrtcVDisplay * ((mode->Flags & V_DBLSCAN) ? 2 : 1) - 1) << 16)); #endif vsync_wid = mode->CrtcVSyncEnd - mode->CrtcVSyncStart; if (!vsync_wid) vsync_wid = 1; if (vsync_wid > 0x1f) vsync_wid = 0x1f; save->crtc_v_sync_strt_wid = (((mode->CrtcVSyncStart - 1) & 0xfff) | (vsync_wid << 16) | ((mode->Flags & V_NVSYNC) ? R128_CRTC_V_SYNC_POL : 0)); save->crtc_offset = 0; save->crtc_offset_cntl = 0; save->crtc_pitch = info->CurrentLayout.displayWidth / 8; R128TRACE(("Pitch = %d bytes (virtualX = %d, displayWidth = %d)\n", save->crtc_pitch, pScrn->virtualX, info->CurrentLayout.displayWidth)); #if X_BYTE_ORDER == X_BIG_ENDIAN /* Change the endianness of the aperture */ switch (info->CurrentLayout.pixel_code) { case 15: case 16: save->config_cntl |= APER_0_BIG_ENDIAN_16BPP_SWAP; break; case 32: save->config_cntl |= APER_0_BIG_ENDIAN_32BPP_SWAP; break; default: break; } #endif return TRUE; } /* Define CRTC2 registers for requested video mode. */ static Bool R128InitCrtc2Registers(ScrnInfoPtr pScrn, R128SavePtr save, DisplayModePtr mode, R128InfoPtr info) { int format; int hsync_start; int hsync_wid; int hsync_fudge; int vsync_wid; int bytpp; int hsync_fudge_default[] = { 0x00, 0x12, 0x09, 0x09, 0x06, 0x05 }; switch (info->CurrentLayout.pixel_code) { case 4: format = 1; bytpp = 0; break; case 8: format = 2; bytpp = 1; break; case 15: format = 3; bytpp = 2; break; /* 555 */ case 16: format = 4; bytpp = 2; break; /* 565 */ case 24: format = 5; bytpp = 3; break; /* RGB */ case 32: format = 6; bytpp = 4; break; /* xRGB */ default: xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Unsupported pixel depth (%d)\n", info->CurrentLayout.bitsPerPixel); return FALSE; } R128TRACE(("Format = %d (%d bytes per pixel)\n", format, bytpp)); hsync_fudge = hsync_fudge_default[format-1]; save->crtc2_gen_cntl = (R128_CRTC2_EN | (format << 8) | ((mode->Flags & V_DBLSCAN) ? R128_CRTC2_DBL_SCAN_EN : 0)); /* save->crtc2_gen_cntl &= ~R128_CRTC_EXT_DISP_EN; save->crtc2_gen_cntl |= (1 << 21); */ save->crtc2_h_total_disp = ((((mode->CrtcHTotal / 8) - 1) & 0xffff) | (((mode->CrtcHDisplay / 8) - 1) << 16)); hsync_wid = (mode->CrtcHSyncEnd - mode->CrtcHSyncStart) / 8; if (!hsync_wid) hsync_wid = 1; if (hsync_wid > 0x3f) hsync_wid = 0x3f; hsync_start = mode->CrtcHSyncStart - 8 + hsync_fudge; save->crtc2_h_sync_strt_wid = ((hsync_start & 0xfff) | (hsync_wid << 16) | ((mode->Flags & V_NHSYNC) ? R128_CRTC2_H_SYNC_POL : 0)); #if 1 /* This works for double scan mode. */ save->crtc2_v_total_disp = (((mode->CrtcVTotal - 1) & 0xffff) | ((mode->CrtcVDisplay - 1) << 16)); #else /* This is what cce/nbmode.c example code does -- is this correct? */ save->crtc2_v_total_disp = (((mode->CrtcVTotal - 1) & 0xffff) | ((mode->CrtcVDisplay * ((mode->Flags & V_DBLSCAN) ? 2 : 1) - 1) << 16)); #endif vsync_wid = mode->CrtcVSyncEnd - mode->CrtcVSyncStart; if (!vsync_wid) vsync_wid = 1; if (vsync_wid > 0x1f) vsync_wid = 0x1f; save->crtc2_v_sync_strt_wid = (((mode->CrtcVSyncStart - 1) & 0xfff) | (vsync_wid << 16) | ((mode->Flags & V_NVSYNC) ? R128_CRTC2_V_SYNC_POL : 0)); save->crtc2_offset = 0; save->crtc2_offset_cntl = 0; save->crtc2_pitch = info->CurrentLayout.displayWidth / 8; R128TRACE(("Pitch = %d bytes (virtualX = %d, displayWidth = %d)\n", save->crtc2_pitch, pScrn->virtualX, info->CurrentLayout.displayWidth)); return TRUE; } /* Define CRTC registers for requested video mode. */ static void R128InitFPRegisters(R128SavePtr orig, R128SavePtr save, DisplayModePtr mode, R128InfoPtr info) { int xres = mode->CrtcHDisplay; int yres = mode->CrtcVDisplay; float Hratio, Vratio; if (info->BIOSDisplay == R128_BIOS_DISPLAY_CRT) { save->crtc_ext_cntl |= R128_CRTC_CRT_ON; save->crtc2_gen_cntl = 0; save->fp_gen_cntl = orig->fp_gen_cntl; save->fp_gen_cntl &= ~(R128_FP_FPON | R128_FP_CRTC_USE_SHADOW_VEND | R128_FP_CRTC_HORZ_DIV2_EN | R128_FP_CRTC_HOR_CRT_DIV2_DIS | R128_FP_USE_SHADOW_EN); save->fp_gen_cntl |= (R128_FP_SEL_CRTC2 | R128_FP_CRTC_DONT_SHADOW_VPAR); save->fp_panel_cntl = orig->fp_panel_cntl & (CARD32)~R128_FP_DIGON; save->lvds_gen_cntl = orig->lvds_gen_cntl & (CARD32)~(R128_LVDS_ON | R128_LVDS_BLON); return; } if (xres > info->PanelXRes) xres = info->PanelXRes; if (yres > info->PanelYRes) yres = info->PanelYRes; Hratio = (float)xres/(float)info->PanelXRes; Vratio = (float)yres/(float)info->PanelYRes; save->fp_horz_stretch = (((((int)(Hratio * R128_HORZ_STRETCH_RATIO_MAX + 0.5)) & R128_HORZ_STRETCH_RATIO_MASK) << R128_HORZ_STRETCH_RATIO_SHIFT) | (orig->fp_horz_stretch & (R128_HORZ_PANEL_SIZE | R128_HORZ_FP_LOOP_STRETCH | R128_HORZ_STRETCH_RESERVED))); save->fp_horz_stretch &= ~R128_HORZ_AUTO_RATIO_FIX_EN; save->fp_horz_stretch &= ~R128_AUTO_HORZ_RATIO; if (xres == info->PanelXRes) save->fp_horz_stretch &= ~(R128_HORZ_STRETCH_BLEND | R128_HORZ_STRETCH_ENABLE); else save->fp_horz_stretch |= (R128_HORZ_STRETCH_BLEND | R128_HORZ_STRETCH_ENABLE); save->fp_vert_stretch = (((((int)(Vratio * R128_VERT_STRETCH_RATIO_MAX + 0.5)) & R128_VERT_STRETCH_RATIO_MASK) << R128_VERT_STRETCH_RATIO_SHIFT) | (orig->fp_vert_stretch & (R128_VERT_PANEL_SIZE | R128_VERT_STRETCH_RESERVED))); save->fp_vert_stretch &= ~R128_VERT_AUTO_RATIO_EN; if (yres == info->PanelYRes) save->fp_vert_stretch &= ~(R128_VERT_STRETCH_ENABLE | R128_VERT_STRETCH_BLEND); else save->fp_vert_stretch |= (R128_VERT_STRETCH_ENABLE | R128_VERT_STRETCH_BLEND); save->fp_gen_cntl = (orig->fp_gen_cntl & (CARD32)~(R128_FP_SEL_CRTC2 | R128_FP_CRTC_USE_SHADOW_VEND | R128_FP_CRTC_HORZ_DIV2_EN | R128_FP_CRTC_HOR_CRT_DIV2_DIS | R128_FP_USE_SHADOW_EN)); save->fp_panel_cntl = orig->fp_panel_cntl; save->lvds_gen_cntl = orig->lvds_gen_cntl; save->tmds_crc = orig->tmds_crc; /* Disable CRT output by disabling CRT output and setting the CRT DAC to use CRTC2, which we set to 0's. In the future, we will want to use the dual CRTC capabilities of the R128 to allow both the flat panel and external CRT to either simultaneously display the same image or display two different images. */ if(!info->isDFP){ if (info->BIOSDisplay == R128_BIOS_DISPLAY_FP_CRT) { save->crtc_ext_cntl |= R128_CRTC_CRT_ON; } else if (info->BIOSDisplay == R128_DUALHEAD) { save->crtc_ext_cntl |= R128_CRTC_CRT_ON; save->dac_cntl |= R128_DAC_CRT_SEL_CRTC2; save->dac_cntl |= R128_DAC_PALETTE2_SNOOP_EN; } else { save->crtc_ext_cntl &= ~R128_CRTC_CRT_ON; save->dac_cntl |= R128_DAC_CRT_SEL_CRTC2; save->crtc2_gen_cntl = 0; } } /* WARNING: Be careful about turning on the flat panel */ if(info->isDFP){ save->fp_gen_cntl = orig->fp_gen_cntl; save->fp_gen_cntl &= ~(R128_FP_CRTC_USE_SHADOW_VEND | R128_FP_CRTC_USE_SHADOW_ROWCUR | R128_FP_CRTC_HORZ_DIV2_EN | R128_FP_CRTC_HOR_CRT_DIV2_DIS | R128_FP_CRT_SYNC_SEL | R128_FP_USE_SHADOW_EN); save->fp_panel_cntl |= (R128_FP_DIGON | R128_FP_BLON); save->fp_gen_cntl |= (R128_FP_FPON | R128_FP_TDMS_EN | R128_FP_CRTC_DONT_SHADOW_VPAR | R128_FP_CRTC_DONT_SHADOW_HEND); save->tmds_transmitter_cntl = (orig->tmds_transmitter_cntl & ~(CARD32)R128_TMDS_PLLRST) | R128_TMDS_PLLEN; } else save->lvds_gen_cntl |= (R128_LVDS_ON | R128_LVDS_BLON); save->fp_crtc_h_total_disp = save->crtc_h_total_disp; save->fp_crtc_v_total_disp = save->crtc_v_total_disp; save->fp_h_sync_strt_wid = save->crtc_h_sync_strt_wid; save->fp_v_sync_strt_wid = save->crtc_v_sync_strt_wid; } /* Define PLL registers for requested video mode. */ static void R128InitPLLRegisters(ScrnInfoPtr pScrn, R128SavePtr save, R128PLLPtr pll, double dot_clock) { unsigned long freq = dot_clock * 100; struct { int divider; int bitvalue; } *post_div, post_divs[] = { /* From RAGE 128 VR/RAGE 128 GL Register Reference Manual (Technical Reference Manual P/N RRG-G04100-C Rev. 0.04), page 3-17 (PLL_DIV_[3:0]). */ { 1, 0 }, /* VCLK_SRC */ { 2, 1 }, /* VCLK_SRC/2 */ { 4, 2 }, /* VCLK_SRC/4 */ { 8, 3 }, /* VCLK_SRC/8 */ { 3, 4 }, /* VCLK_SRC/3 */ /* bitvalue = 5 is reserved */ { 6, 6 }, /* VCLK_SRC/6 */ { 12, 7 }, /* VCLK_SRC/12 */ { 0, 0 } }; if (freq > pll->max_pll_freq) freq = pll->max_pll_freq; if (freq * 12 < pll->min_pll_freq) freq = pll->min_pll_freq / 12; for (post_div = &post_divs[0]; post_div->divider; ++post_div) { save->pll_output_freq = post_div->divider * freq; if (save->pll_output_freq >= pll->min_pll_freq && save->pll_output_freq <= pll->max_pll_freq) break; } save->dot_clock_freq = freq; save->feedback_div = R128Div(pll->reference_div * save->pll_output_freq, pll->reference_freq); save->post_div = post_div->divider; R128TRACE(("dc=%d, of=%d, fd=%d, pd=%d\n", save->dot_clock_freq, save->pll_output_freq, save->feedback_div, save->post_div)); save->ppll_ref_div = pll->reference_div; save->ppll_div_3 = (save->feedback_div | (post_div->bitvalue << 16)); save->htotal_cntl = 0; } /* Define PLL2 registers for requested video mode. */ static void R128InitPLL2Registers(R128SavePtr save, R128PLLPtr pll, double dot_clock) { unsigned long freq = dot_clock * 100; struct { int divider; int bitvalue; } *post_div, post_divs[] = { /* From RAGE 128 VR/RAGE 128 GL Register Reference Manual (Technical Reference Manual P/N RRG-G04100-C Rev. 0.04), page 3-17 (PLL_DIV_[3:0]). */ { 1, 0 }, /* VCLK_SRC */ { 2, 1 }, /* VCLK_SRC/2 */ { 4, 2 }, /* VCLK_SRC/4 */ { 8, 3 }, /* VCLK_SRC/8 */ { 3, 4 }, /* VCLK_SRC/3 */ /* bitvalue = 5 is reserved */ { 6, 6 }, /* VCLK_SRC/6 */ { 12, 7 }, /* VCLK_SRC/12 */ { 0, 0 } }; if (freq > pll->max_pll_freq) freq = pll->max_pll_freq; if (freq * 12 < pll->min_pll_freq) freq = pll->min_pll_freq / 12; for (post_div = &post_divs[0]; post_div->divider; ++post_div) { save->pll_output_freq_2 = post_div->divider * freq; if (save->pll_output_freq_2 >= pll->min_pll_freq && save->pll_output_freq_2 <= pll->max_pll_freq) break; } save->dot_clock_freq_2 = freq; save->feedback_div_2 = R128Div(pll->reference_div * save->pll_output_freq_2, pll->reference_freq); save->post_div_2 = post_div->divider; R128TRACE(("dc=%d, of=%d, fd=%d, pd=%d\n", save->dot_clock_freq_2, save->pll_output_freq_2, save->feedback_div_2, save->post_div_2)); save->p2pll_ref_div = pll->reference_div; save->p2pll_div_0 = (save->feedback_div_2 | (post_div->bitvalue<<16)); save->htotal_cntl2 = 0; } /* Define DDA registers for requested video mode. */ static Bool R128InitDDARegisters(ScrnInfoPtr pScrn, R128SavePtr save, R128PLLPtr pll, R128InfoPtr info, DisplayModePtr mode) { int DisplayFifoWidth = 128; int DisplayFifoDepth = 32; int XclkFreq; int VclkFreq; int XclksPerTransfer; int XclksPerTransferPrecise; int UseablePrecision; int Roff; int Ron; XclkFreq = pll->xclk; VclkFreq = R128Div(pll->reference_freq * save->feedback_div, pll->reference_div * save->post_div); if(info->isDFP && !info->isPro2){ if(info->PanelXRes != mode->CrtcHDisplay) VclkFreq = (VclkFreq * mode->CrtcHDisplay)/info->PanelXRes; } XclksPerTransfer = R128Div(XclkFreq * DisplayFifoWidth, VclkFreq * (info->CurrentLayout.pixel_bytes * 8)); UseablePrecision = R128MinBits(XclksPerTransfer) + 1; XclksPerTransferPrecise = R128Div((XclkFreq * DisplayFifoWidth) << (11 - UseablePrecision), VclkFreq * (info->CurrentLayout.pixel_bytes * 8)); Roff = XclksPerTransferPrecise * (DisplayFifoDepth - 4); Ron = (4 * info->ram->MB + 3 * MAX(info->ram->Trcd - 2, 0) + 2 * info->ram->Trp + info->ram->Twr + info->ram->CL + info->ram->Tr2w + XclksPerTransfer) << (11 - UseablePrecision); if (Ron + info->ram->Rloop >= Roff) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "(Ron = %d) + (Rloop = %d) >= (Roff = %d)\n", Ron, info->ram->Rloop, Roff); return FALSE; } save->dda_config = (XclksPerTransferPrecise | (UseablePrecision << 16) | (info->ram->Rloop << 20)); save->dda_on_off = (Ron << 16) | Roff; R128TRACE(("XclkFreq = %d; VclkFreq = %d; per = %d, %d (useable = %d)\n", XclkFreq, VclkFreq, XclksPerTransfer, XclksPerTransferPrecise, UseablePrecision)); R128TRACE(("Roff = %d, Ron = %d, Rloop = %d\n", Roff, Ron, info->ram->Rloop)); return TRUE; } /* Define DDA2 registers for requested video mode. */ static Bool R128InitDDA2Registers(ScrnInfoPtr pScrn, R128SavePtr save, R128PLLPtr pll, R128InfoPtr info, DisplayModePtr mode) { int DisplayFifoWidth = 128; int DisplayFifoDepth = 32; int XclkFreq; int VclkFreq; int XclksPerTransfer; int XclksPerTransferPrecise; int UseablePrecision; int Roff; int Ron; XclkFreq = pll->xclk; VclkFreq = R128Div(pll->reference_freq * save->feedback_div_2, pll->reference_div * save->post_div_2); if(info->isDFP && !info->isPro2){ if(info->PanelXRes != mode->CrtcHDisplay) VclkFreq = (VclkFreq * mode->CrtcHDisplay)/info->PanelXRes; } XclksPerTransfer = R128Div(XclkFreq * DisplayFifoWidth, VclkFreq * (info->CurrentLayout.pixel_bytes * 8)); UseablePrecision = R128MinBits(XclksPerTransfer) + 1; XclksPerTransferPrecise = R128Div((XclkFreq * DisplayFifoWidth) << (11 - UseablePrecision), VclkFreq * (info->CurrentLayout.pixel_bytes * 8)); Roff = XclksPerTransferPrecise * (DisplayFifoDepth - 4); Ron = (4 * info->ram->MB + 3 * MAX(info->ram->Trcd - 2, 0) + 2 * info->ram->Trp + info->ram->Twr + info->ram->CL + info->ram->Tr2w + XclksPerTransfer) << (11 - UseablePrecision); if (Ron + info->ram->Rloop >= Roff) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "(Ron = %d) + (Rloop = %d) >= (Roff = %d)\n", Ron, info->ram->Rloop, Roff); return FALSE; } save->dda2_config = (XclksPerTransferPrecise | (UseablePrecision << 16) | (info->ram->Rloop << 20)); /*save->dda2_on_off = (Ron << 16) | Roff;*/ /* shift most be 18 otherwise there's corruption on crtc2 */ save->dda2_on_off = (Ron << 18) | Roff; R128TRACE(("XclkFreq = %d; VclkFreq = %d; per = %d, %d (useable = %d)\n", XclkFreq, VclkFreq, XclksPerTransfer, XclksPerTransferPrecise, UseablePrecision)); R128TRACE(("Roff = %d, Ron = %d, Rloop = %d\n", Roff, Ron, info->ram->Rloop)); return TRUE; } #if 0 /* Define initial palette for requested video mode. This doesn't do anything for XFree86 4.0. */ static void R128InitPalette(R128SavePtr save) { save->palette_valid = FALSE; } #endif /* Define registers for a requested video mode. */ static Bool R128Init(ScrnInfoPtr pScrn, DisplayModePtr mode, R128SavePtr save) { R128InfoPtr info = R128PTR(pScrn); double dot_clock = mode->Clock/1000.0; #if R128_DEBUG ErrorF("%-12.12s %7.2f %4d %4d %4d %4d %4d %4d %4d %4d (%d,%d)", mode->name, dot_clock, mode->HDisplay, mode->HSyncStart, mode->HSyncEnd, mode->HTotal, mode->VDisplay, mode->VSyncStart, mode->VSyncEnd, mode->VTotal, pScrn->depth, pScrn->bitsPerPixel); if (mode->Flags & V_DBLSCAN) ErrorF(" D"); if (mode->Flags & V_CSYNC) ErrorF(" C"); if (mode->Flags & V_INTERLACE) ErrorF(" I"); if (mode->Flags & V_PHSYNC) ErrorF(" +H"); if (mode->Flags & V_NHSYNC) ErrorF(" -H"); if (mode->Flags & V_PVSYNC) ErrorF(" +V"); if (mode->Flags & V_NVSYNC) ErrorF(" -V"); ErrorF("\n"); ErrorF("%-12.12s %7.2f %4d %4d %4d %4d %4d %4d %4d %4d (%d,%d)", mode->name, dot_clock, mode->CrtcHDisplay, mode->CrtcHSyncStart, mode->CrtcHSyncEnd, mode->CrtcHTotal, mode->CrtcVDisplay, mode->CrtcVSyncStart, mode->CrtcVSyncEnd, mode->CrtcVTotal, pScrn->depth, pScrn->bitsPerPixel); if (mode->Flags & V_DBLSCAN) ErrorF(" D"); if (mode->Flags & V_CSYNC) ErrorF(" C"); if (mode->Flags & V_INTERLACE) ErrorF(" I"); if (mode->Flags & V_PHSYNC) ErrorF(" +H"); if (mode->Flags & V_NHSYNC) ErrorF(" -H"); if (mode->Flags & V_PVSYNC) ErrorF(" +V"); if (mode->Flags & V_NVSYNC) ErrorF(" -V"); ErrorF("\n"); #endif info->Flags = mode->Flags; if(info->IsSecondary) { if (!R128InitCrtc2Registers(pScrn, save, pScrn->currentMode,info)) return FALSE; R128InitPLL2Registers(save, &info->pll, dot_clock); if (!R128InitDDA2Registers(pScrn, save, &info->pll, info, mode)) return FALSE; } else { R128InitCommonRegisters(save, info); if(!R128InitCrtcRegisters(pScrn, save, mode, info)) return FALSE; if(dot_clock) { R128InitPLLRegisters(pScrn, save, &info->pll, dot_clock); if (!R128InitDDARegisters(pScrn, save, &info->pll, info, mode)) return FALSE; } else { save->ppll_ref_div = info->SavedReg.ppll_ref_div; save->ppll_div_3 = info->SavedReg.ppll_div_3; save->htotal_cntl = info->SavedReg.htotal_cntl; save->dda_config = info->SavedReg.dda_config; save->dda_on_off = info->SavedReg.dda_on_off; } /* not used for now */ /*if (!info->PaletteSavedOnVT) RADEONInitPalette(save);*/ } if (((info->DisplayType == MT_DFP) || (info->DisplayType == MT_LCD))) { R128InitFPRegisters(&info->SavedReg, save, mode, info); } R128TRACE(("R128Init returns %p\n", save)); return TRUE; } /* Initialize a new mode. */ static Bool R128ModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode) { R128InfoPtr info = R128PTR(pScrn); if (!R128Init(pScrn, mode, &info->ModeReg)) return FALSE; /* FIXME? DRILock/DRIUnlock here? */ pScrn->vtSema = TRUE; R128Blank(pScrn); R128RestoreMode(pScrn, &info->ModeReg); R128Unblank(pScrn); info->CurrentLayout.mode = mode; return TRUE; } static Bool R128SaveScreen(ScreenPtr pScreen, int mode) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; Bool unblank; unblank = xf86IsUnblank(mode); if (unblank) SetTimeSinceLastInputEvent(); if ((pScrn != NULL) && pScrn->vtSema) { if (unblank) R128Unblank(pScrn); else R128Blank(pScrn); } return TRUE; } /* * SwitchMode() doesn't work right on crtc2 on some laptops. * The workaround is to switch the mode, then switch to another VT, then * switch back. --AGD */ _X_EXPORT Bool R128SwitchMode(int scrnIndex, DisplayModePtr mode, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; R128InfoPtr info = R128PTR(pScrn); Bool ret; info->SwitchingMode = TRUE; ret = R128ModeInit(xf86Screens[scrnIndex], mode); info->SwitchingMode = FALSE; return ret; } /* Used to disallow modes that are not supported by the hardware. */ _X_EXPORT ModeStatus R128ValidMode(int scrnIndex, DisplayModePtr mode, Bool verbose, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; R128InfoPtr info = R128PTR(pScrn); if(info->isDFP) { if(info->PanelXRes < mode->CrtcHDisplay || info->PanelYRes < mode->CrtcVDisplay) return MODE_NOMODE; else return MODE_OK; } if (info->DisplayType == MT_LCD) { if (mode->Flags & V_INTERLACE) return MODE_NO_INTERLACE; if (mode->Flags & V_DBLSCAN) return MODE_NO_DBLESCAN; } if (info->DisplayType == MT_LCD && info->VBIOS) { int i; for (i = info->FPBIOSstart+64; R128_BIOS16(i) != 0; i += 2) { int j = R128_BIOS16(i); if (mode->CrtcHDisplay == R128_BIOS16(j) && mode->CrtcVDisplay == R128_BIOS16(j+2)) { if ((flags & MODECHECK_FINAL) == MODECHECK_FINAL) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Modifying mode according to VBIOS: %ix%i [pclk %.1f MHz] for FP to: ", mode->CrtcHDisplay,mode->CrtcVDisplay, (float)mode->Clock/1000); /* Assume we are using expanded mode */ if (R128_BIOS16(j+5)) j = R128_BIOS16(j+5); else j += 9; mode->Clock = (CARD32)R128_BIOS16(j) * 10; mode->HDisplay = mode->CrtcHDisplay = ((R128_BIOS16(j+10) & 0x01ff)+1)*8; mode->HSyncStart = mode->CrtcHSyncStart = ((R128_BIOS16(j+12) & 0x01ff)+1)*8; mode->HSyncEnd = mode->CrtcHSyncEnd = mode->CrtcHSyncStart + (R128_BIOS8(j+14) & 0x1f); mode->HTotal = mode->CrtcHTotal = ((R128_BIOS16(j+8) & 0x01ff)+1)*8; mode->VDisplay = mode->CrtcVDisplay = (R128_BIOS16(j+17) & 0x07ff)+1; mode->VSyncStart = mode->CrtcVSyncStart = (R128_BIOS16(j+19) & 0x07ff)+1; mode->VSyncEnd = mode->CrtcVSyncEnd = mode->CrtcVSyncStart + ((R128_BIOS16(j+19) >> 11) & 0x1f); mode->VTotal = mode->CrtcVTotal = (R128_BIOS16(j+15) & 0x07ff)+1; xf86ErrorF("%ix%i [pclk %.1f MHz]\n", mode->CrtcHDisplay,mode->CrtcVDisplay, (float)mode->Clock/1000); } return MODE_OK; } } xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 5, "Mode rejected for FP %ix%i [pclk: %.1f] " "(not listed in VBIOS)\n", mode->CrtcHDisplay, mode->CrtcVDisplay, (float)mode->Clock / 1000); return MODE_NOMODE; } return MODE_OK; } /* Adjust viewport into virtual desktop such that (0,0) in viewport space is (x,y) in virtual space. */ _X_EXPORT void R128AdjustFrame(int scrnIndex, int x, int y, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; int Base; if(info->showCache && y && pScrn->vtSema) y += pScrn->virtualY - 1; Base = y * info->CurrentLayout.displayWidth + x; switch (info->CurrentLayout.pixel_code) { case 15: case 16: Base *= 2; break; case 24: Base *= 3; break; case 32: Base *= 4; break; } Base &= ~7; /* 3 lower bits are always 0 */ if (info->CurrentLayout.pixel_code == 24) Base += 8 * (Base % 3); /* Must be multiple of 8 and 3 */ if(info->IsSecondary) { Base += pScrn->fbOffset; OUTREG(R128_CRTC2_OFFSET, Base); } else OUTREG(R128_CRTC_OFFSET, Base); } /* Called when VT switching back to the X server. Reinitialize the video mode. */ _X_EXPORT Bool R128EnterVT(int scrnIndex, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; R128InfoPtr info = R128PTR(pScrn); R128TRACE(("R128EnterVT\n")); if (info->FBDev) { if (!fbdevHWEnterVT(scrnIndex,flags)) return FALSE; } else if (!R128ModeInit(pScrn, pScrn->currentMode)) return FALSE; if (info->accelOn) R128EngineInit(pScrn); #ifdef XF86DRI if (info->directRenderingEnabled) { if (info->irq) { /* Need to make sure interrupts are enabled */ unsigned char *R128MMIO = info->MMIO; OUTREG(R128_GEN_INT_CNTL, info->gen_int_cntl); } R128CCE_START(pScrn, info); DRIUnlock(pScrn->pScreen); } #endif info->PaletteSavedOnVT = FALSE; pScrn->AdjustFrame(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0); return TRUE; } /* Called when VT switching away from the X server. Restore the original text mode. */ _X_EXPORT void R128LeaveVT(int scrnIndex, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; R128InfoPtr info = R128PTR(pScrn); R128SavePtr save = &info->ModeReg; R128TRACE(("R128LeaveVT\n")); #ifdef XF86DRI if (info->directRenderingEnabled) { DRILock(pScrn->pScreen, 0); R128CCE_STOP(pScrn, info); } #endif R128SavePalette(pScrn, save); info->PaletteSavedOnVT = TRUE; if (info->FBDev) fbdevHWLeaveVT(scrnIndex,flags); else R128Restore(pScrn); } /* Called at the end of each server generation. Restore the original text mode, unmap video memory, and unwrap and call the saved CloseScreen function. */ static Bool R128CloseScreen(int scrnIndex, ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; R128InfoPtr info = R128PTR(pScrn); R128TRACE(("R128CloseScreen\n")); #ifdef XF86DRI /* Disable direct rendering */ if (info->directRenderingEnabled) { R128DRICloseScreen(pScreen); info->directRenderingEnabled = FALSE; } #endif if (pScrn->vtSema) { R128Restore(pScrn); R128UnmapMem(pScrn); } if (info->accel) XAADestroyInfoRec(info->accel); info->accel = NULL; if (info->scratch_save) xfree(info->scratch_save); info->scratch_save = NULL; if (info->cursor) xf86DestroyCursorInfoRec(info->cursor); info->cursor = NULL; if (info->DGAModes) xfree(info->DGAModes); info->DGAModes = NULL; if (info->adaptor) { xfree(info->adaptor->pPortPrivates[0].ptr); xf86XVFreeVideoAdaptorRec(info->adaptor); info->adaptor = NULL; } pScrn->vtSema = FALSE; pScreen->BlockHandler = info->BlockHandler; pScreen->CloseScreen = info->CloseScreen; return (*pScreen->CloseScreen)(scrnIndex, pScreen); } _X_EXPORT void R128FreeScreen(int scrnIndex, int flags) { ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; R128InfoPtr info = R128PTR(pScrn); R128TRACE(("R128FreeScreen\n")); #ifdef WITH_VGAHW if (info->VGAAccess && xf86LoaderCheckSymbol("vgaHWFreeHWRec")) vgaHWFreeHWRec(pScrn); #endif R128FreeRec(pScrn); } /* Sets VESA Display Power Management Signaling (DPMS) Mode. */ static void R128DisplayPowerManagementSet(ScrnInfoPtr pScrn, int PowerManagementMode, int flags) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; int mask = (R128_CRTC_DISPLAY_DIS | R128_CRTC_HSYNC_DIS | R128_CRTC_VSYNC_DIS); int mask2 = R128_CRTC2_DISP_DIS; switch (PowerManagementMode) { case DPMSModeOn: /* Screen: On; HSync: On, VSync: On */ if (info->IsSecondary) OUTREGP(R128_CRTC2_GEN_CNTL, 0, ~mask2); else OUTREGP(R128_CRTC_EXT_CNTL, 0, ~mask); break; case DPMSModeStandby: /* Screen: Off; HSync: Off, VSync: On */ if (info->IsSecondary) OUTREGP(R128_CRTC2_GEN_CNTL, R128_CRTC2_DISP_DIS, ~mask2); else OUTREGP(R128_CRTC_EXT_CNTL, R128_CRTC_DISPLAY_DIS | R128_CRTC_HSYNC_DIS, ~mask); break; case DPMSModeSuspend: /* Screen: Off; HSync: On, VSync: Off */ if (info->IsSecondary) OUTREGP(R128_CRTC2_GEN_CNTL, R128_CRTC2_DISP_DIS, ~mask2); else OUTREGP(R128_CRTC_EXT_CNTL, R128_CRTC_DISPLAY_DIS | R128_CRTC_VSYNC_DIS, ~mask); break; case DPMSModeOff: /* Screen: Off; HSync: Off, VSync: Off */ if (info->IsSecondary) OUTREGP(R128_CRTC2_GEN_CNTL, mask2, ~mask2); else OUTREGP(R128_CRTC_EXT_CNTL, mask, ~mask); break; } } static int r128_set_backlight_enable(ScrnInfoPtr pScrn, int on); static void R128DisplayPowerManagementSetLCD(ScrnInfoPtr pScrn, int PowerManagementMode, int flags) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; int mask = R128_LVDS_DISPLAY_DIS; switch (PowerManagementMode) { case DPMSModeOn: /* Screen: On; HSync: On, VSync: On */ OUTREGP(R128_LVDS_GEN_CNTL, 0, ~mask); r128_set_backlight_enable(pScrn, 1); break; case DPMSModeStandby: /* Fall through */ case DPMSModeSuspend: /* Fall through */ break; case DPMSModeOff: /* Screen: Off; HSync: Off, VSync: Off */ OUTREGP(R128_LVDS_GEN_CNTL, mask, ~mask); r128_set_backlight_enable(pScrn, 0); break; } } static int r128_set_backlight_enable(ScrnInfoPtr pScrn, int on) { R128InfoPtr info = R128PTR(pScrn); unsigned char *R128MMIO = info->MMIO; unsigned int lvds_gen_cntl = INREG(R128_LVDS_GEN_CNTL); lvds_gen_cntl |= (/*R128_LVDS_BL_MOD_EN |*/ R128_LVDS_BLON); if (on) { lvds_gen_cntl |= R128_LVDS_DIGON; if (!(lvds_gen_cntl & R128_LVDS_ON)) { lvds_gen_cntl &= ~R128_LVDS_BLON; OUTREG(R128_LVDS_GEN_CNTL, lvds_gen_cntl); (void)INREG(R128_LVDS_GEN_CNTL); usleep(10000); lvds_gen_cntl |= R128_LVDS_BLON; OUTREG(R128_LVDS_GEN_CNTL, lvds_gen_cntl); } #if 0 lvds_gen_cntl &= ~R128_LVDS_BL_MOD_LEVEL_MASK; lvds_gen_cntl |= (0xFF /* backlight_conv[level] */ << R128_LVDS_BL_MOD_LEVEL_SHIFT); #endif lvds_gen_cntl |= (R128_LVDS_ON | R128_LVDS_EN); lvds_gen_cntl &= ~R128_LVDS_DISPLAY_DIS; } else { #if 0 lvds_gen_cntl &= ~R128_LVDS_BL_MOD_LEVEL_MASK; lvds_gen_cntl |= (0xFF /* backlight_conv[0] */ << R128_LVDS_BL_MOD_LEVEL_SHIFT); #endif lvds_gen_cntl |= R128_LVDS_DISPLAY_DIS; OUTREG(R128_LVDS_GEN_CNTL, lvds_gen_cntl); usleep(10); lvds_gen_cntl &= ~(R128_LVDS_ON | R128_LVDS_EN | R128_LVDS_BLON | R128_LVDS_DIGON); } OUTREG(R128_LVDS_GEN_CNTL, lvds_gen_cntl); return 0; } _X_EXPORT void R128FillInScreenInfo(ScrnInfoPtr pScrn) { pScrn->driverVersion = R128_VERSION_CURRENT; pScrn->driverName = R128_DRIVER_NAME; pScrn->name = R128_NAME; pScrn->PreInit = R128PreInit; pScrn->ScreenInit = R128ScreenInit; pScrn->SwitchMode = R128SwitchMode; pScrn->AdjustFrame = R128AdjustFrame; pScrn->EnterVT = R128EnterVT; pScrn->LeaveVT = R128LeaveVT; pScrn->FreeScreen = R128FreeScreen; pScrn->ValidMode = R128ValidMode; }