/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon_accel.c,v 1.36 2003/11/10 18:41:22 tsi Exp $ */ /* * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and * VA Linux Systems Inc., Fremont, California. * * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining * a copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation on the rights to use, copy, modify, merge, * publish, distribute, sublicense, and/or sell copies of the Software, * and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial * portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. */ /* * Authors: * Kevin E. Martin * Rickard E. Faith * Alan Hourihane * * Credits: * * Thanks to Ani Joshi for providing source * code to his Radeon driver. Portions of this file are based on the * initialization code for that driver. * * References: * * !!!! FIXME !!!! * RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical * Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April * 1999. * * RAGE 128 Software Development Manual (Technical Reference Manual P/N * SDK-G04000 Rev. 0.01), ATI Technologies: June 1999. * * Notes on unimplemented XAA optimizations: * * SetClipping: This has been removed as XAA expects 16bit registers * for full clipping. * TwoPointLine: The Radeon supports this. Not Bresenham. * DashedLine with non-power-of-two pattern length: Apparently, there is * no way to set the length of the pattern -- it is always * assumed to be 8 or 32 (or 1024?). * ScreenToScreenColorExpandFill: See p. 4-17 of the Technical Reference * Manual where it states that monochrome expansion of frame * buffer data is not supported. * CPUToScreenColorExpandFill, direct: The implementation here uses a hybrid * direct/indirect method. If we had more data registers, * then we could do better. If XAA supported a trigger write * address, the code would be simpler. * Color8x8PatternFill: Apparently, an 8x8 color brush cannot take an 8x8 * pattern from frame buffer memory. * ImageWrites: Same as CPUToScreenColorExpandFill * */ /* Driver data structures */ #include "radeon.h" #include "radeon_macros.h" #include "radeon_probe.h" #include "radeon_reg.h" #include "radeon_version.h" #ifdef XF86DRI #define _XF86DRI_SERVER_ #include "radeon_dri.h" #include "radeon_common.h" #include "radeon_sarea.h" #endif /* Line support */ #include "miline.h" /* X and server generic header files */ #include "xf86.h" static struct { int rop; int pattern; } RADEON_ROP[] = { { RADEON_ROP3_ZERO, RADEON_ROP3_ZERO }, /* GXclear */ { RADEON_ROP3_DSa, RADEON_ROP3_DPa }, /* Gxand */ { RADEON_ROP3_SDna, RADEON_ROP3_PDna }, /* GXandReverse */ { RADEON_ROP3_S, RADEON_ROP3_P }, /* GXcopy */ { RADEON_ROP3_DSna, RADEON_ROP3_DPna }, /* GXandInverted */ { RADEON_ROP3_D, RADEON_ROP3_D }, /* GXnoop */ { RADEON_ROP3_DSx, RADEON_ROP3_DPx }, /* GXxor */ { RADEON_ROP3_DSo, RADEON_ROP3_DPo }, /* GXor */ { RADEON_ROP3_DSon, RADEON_ROP3_DPon }, /* GXnor */ { RADEON_ROP3_DSxn, RADEON_ROP3_PDxn }, /* GXequiv */ { RADEON_ROP3_Dn, RADEON_ROP3_Dn }, /* GXinvert */ { RADEON_ROP3_SDno, RADEON_ROP3_PDno }, /* GXorReverse */ { RADEON_ROP3_Sn, RADEON_ROP3_Pn }, /* GXcopyInverted */ { RADEON_ROP3_DSno, RADEON_ROP3_DPno }, /* GXorInverted */ { RADEON_ROP3_DSan, RADEON_ROP3_DPan }, /* GXnand */ { RADEON_ROP3_ONE, RADEON_ROP3_ONE } /* GXset */ }; extern int gRADEONEntityIndex; /* The FIFO has 64 slots. This routines waits until at least `entries' * of these slots are empty. */ void RADEONWaitForFifoFunction(ScrnInfoPtr pScrn, int entries) { RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; int i; for (;;) { for (i = 0; i < RADEON_TIMEOUT; i++) { info->fifo_slots = INREG(RADEON_RBBM_STATUS) & RADEON_RBBM_FIFOCNT_MASK; if (info->fifo_slots >= entries) return; } RADEONTRACE(("FIFO timed out: %d entries, stat=0x%08x\n", INREG(RADEON_RBBM_STATUS) & RADEON_RBBM_FIFOCNT_MASK, INREG(RADEON_RBBM_STATUS))); xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "FIFO timed out, resetting engine...\n"); RADEONEngineReset(pScrn); RADEONEngineRestore(pScrn); #ifdef XF86DRI if (info->directRenderingEnabled) { RADEONCP_RESET(pScrn, info); RADEONCP_START(pScrn, info); } #endif } } /* Flush all dirty data in the Pixel Cache to memory */ void RADEONEngineFlush(ScrnInfoPtr pScrn) { RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; int i; OUTREGP(RADEON_RB2D_DSTCACHE_CTLSTAT, RADEON_RB2D_DC_FLUSH_ALL, ~RADEON_RB2D_DC_FLUSH_ALL); for (i = 0; i < RADEON_TIMEOUT; i++) { if (!(INREG(RADEON_RB2D_DSTCACHE_CTLSTAT) & RADEON_RB2D_DC_BUSY)) break; } } /* Reset graphics card to known state */ void RADEONEngineReset(ScrnInfoPtr pScrn) { RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; CARD32 clock_cntl_index; CARD32 mclk_cntl; CARD32 rbbm_soft_reset; CARD32 host_path_cntl; RADEONEngineFlush(pScrn); clock_cntl_index = INREG(RADEON_CLOCK_CNTL_INDEX); if (info->R300CGWorkaround) R300CGWorkaround(pScrn); /* Some ASICs have bugs with dynamic-on feature, which are * ASIC-version dependent, so we force all blocks on for now */ if (info->HasCRTC2) { CARD32 tmp; tmp = INPLL(pScrn, RADEON_SCLK_CNTL); OUTPLL(RADEON_SCLK_CNTL, ((tmp & ~RADEON_DYN_STOP_LAT_MASK) | RADEON_CP_MAX_DYN_STOP_LAT | RADEON_SCLK_FORCEON_MASK)); if (info->ChipFamily == CHIP_FAMILY_RV200) { tmp = INPLL(pScrn, RADEON_SCLK_MORE_CNTL); OUTPLL(RADEON_SCLK_MORE_CNTL, tmp | RADEON_SCLK_MORE_FORCEON); } } mclk_cntl = INPLL(pScrn, RADEON_MCLK_CNTL); OUTPLL(RADEON_MCLK_CNTL, (mclk_cntl | RADEON_FORCEON_MCLKA | RADEON_FORCEON_MCLKB | RADEON_FORCEON_YCLKA | RADEON_FORCEON_YCLKB | RADEON_FORCEON_MC | RADEON_FORCEON_AIC)); /* Soft resetting HDP thru RBBM_SOFT_RESET register can cause some * unexpected behaviour on some machines. Here we use * RADEON_HOST_PATH_CNTL to reset it. */ host_path_cntl = INREG(RADEON_HOST_PATH_CNTL); rbbm_soft_reset = INREG(RADEON_RBBM_SOFT_RESET); if ((info->ChipFamily == CHIP_FAMILY_R300) || (info->ChipFamily == CHIP_FAMILY_R350) || (info->ChipFamily == CHIP_FAMILY_RV350)) { CARD32 tmp; OUTREG(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | RADEON_SOFT_RESET_CP | RADEON_SOFT_RESET_HI | RADEON_SOFT_RESET_E2)); INREG(RADEON_RBBM_SOFT_RESET); OUTREG(RADEON_RBBM_SOFT_RESET, 0); tmp = INREG(RADEON_RB2D_DSTCACHE_MODE); OUTREG(RADEON_RB2D_DSTCACHE_MODE, tmp | (1 << 17)); /* FIXME */ } else { OUTREG(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | RADEON_SOFT_RESET_CP | RADEON_SOFT_RESET_HI | RADEON_SOFT_RESET_SE | RADEON_SOFT_RESET_RE | RADEON_SOFT_RESET_PP | RADEON_SOFT_RESET_E2 | RADEON_SOFT_RESET_RB)); INREG(RADEON_RBBM_SOFT_RESET); OUTREG(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset & (CARD32) ~(RADEON_SOFT_RESET_CP | RADEON_SOFT_RESET_HI | RADEON_SOFT_RESET_SE | RADEON_SOFT_RESET_RE | RADEON_SOFT_RESET_PP | RADEON_SOFT_RESET_E2 | RADEON_SOFT_RESET_RB))); INREG(RADEON_RBBM_SOFT_RESET); } OUTREG(RADEON_HOST_PATH_CNTL, host_path_cntl | RADEON_HDP_SOFT_RESET); INREG(RADEON_HOST_PATH_CNTL); OUTREG(RADEON_HOST_PATH_CNTL, host_path_cntl); if ((info->ChipFamily != CHIP_FAMILY_R300) && (info->ChipFamily != CHIP_FAMILY_R350) && (info->ChipFamily != CHIP_FAMILY_RV350)) OUTREG(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset); OUTREG(RADEON_CLOCK_CNTL_INDEX, clock_cntl_index); OUTPLL(RADEON_MCLK_CNTL, mclk_cntl); if (info->R300CGWorkaround) R300CGWorkaround(pScrn); } /* Restore the acceleration hardware to its previous state */ void RADEONEngineRestore(ScrnInfoPtr pScrn) { RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; int pitch64; RADEONTRACE(("EngineRestore (%d/%d)\n", info->CurrentLayout.pixel_code, info->CurrentLayout.bitsPerPixel)); RADEONWaitForFifo(pScrn, 1); /* NOTE: The following RB2D_DSTCACHE_MODE setting will cause the * R300 to hang. ATI does not see a reason to change it from the * default BIOS settings (even on non-R300 cards). This setting * might be removed in future versions of the Radeon driver. */ /* Turn of all automatic flushing - we'll do it all */ if ((info->ChipFamily != CHIP_FAMILY_R300) && (info->ChipFamily != CHIP_FAMILY_R350) && (info->ChipFamily != CHIP_FAMILY_RV350)) OUTREG(RADEON_RB2D_DSTCACHE_MODE, 0); pitch64 = ((pScrn->displayWidth * (pScrn->bitsPerPixel / 8) + 0x3f)) >> 6; RADEONWaitForFifo(pScrn, 1); OUTREG(RADEON_DEFAULT_OFFSET, ((info->fbLocation >> 10) | (pitch64 << 22))); RADEONWaitForFifo(pScrn, 1); #if X_BYTE_ORDER == X_BIG_ENDIAN OUTREGP(RADEON_DP_DATATYPE, RADEON_HOST_BIG_ENDIAN_EN, ~RADEON_HOST_BIG_ENDIAN_EN); #else OUTREGP(RADEON_DP_DATATYPE, 0, ~RADEON_HOST_BIG_ENDIAN_EN); #endif /* Restore SURFACE_CNTL - only the first head contains valid data -ReneR */ if (!info->IsSecondary) { OUTREG(RADEON_SURFACE_CNTL, info->ModeReg.surface_cntl); } RADEONWaitForFifo(pScrn, 1); OUTREG(RADEON_DEFAULT_SC_BOTTOM_RIGHT, (RADEON_DEFAULT_SC_RIGHT_MAX | RADEON_DEFAULT_SC_BOTTOM_MAX)); RADEONWaitForFifo(pScrn, 1); OUTREG(RADEON_DP_GUI_MASTER_CNTL, (info->dp_gui_master_cntl | RADEON_GMC_BRUSH_SOLID_COLOR | RADEON_GMC_SRC_DATATYPE_COLOR)); RADEONWaitForFifo(pScrn, 7); OUTREG(RADEON_DST_LINE_START, 0); OUTREG(RADEON_DST_LINE_END, 0); OUTREG(RADEON_DP_BRUSH_FRGD_CLR, 0xffffffff); OUTREG(RADEON_DP_BRUSH_BKGD_CLR, 0x00000000); OUTREG(RADEON_DP_SRC_FRGD_CLR, 0xffffffff); OUTREG(RADEON_DP_SRC_BKGD_CLR, 0x00000000); OUTREG(RADEON_DP_WRITE_MASK, 0xffffffff); #ifdef RENDER /* In the DRI case, it's initialized when the server grabs the lock. We * don't hold the lock here, so don't do it in that case. */ if (!info->directRenderingEnabled && info->RenderAccel) RADEONInit3DEngineForRender(pScrn); #endif RADEONWaitForIdleMMIO(pScrn); } /* Initialize the acceleration hardware */ void RADEONEngineInit(ScrnInfoPtr pScrn) { RADEONInfoPtr info = RADEONPTR(pScrn); unsigned char *RADEONMMIO = info->MMIO; RADEONTRACE(("EngineInit (%d/%d)\n", info->CurrentLayout.pixel_code, info->CurrentLayout.bitsPerPixel)); OUTREG(RADEON_RB3D_CNTL, 0); RADEONEngineReset(pScrn); switch (info->CurrentLayout.pixel_code) { case 8: info->datatype = 2; break; case 15: info->datatype = 3; break; case 16: info->datatype = 4; break; case 24: info->datatype = 5; break; case 32: info->datatype = 6; break; default: RADEONTRACE(("Unknown depth/bpp = %d/%d (code = %d)\n", info->CurrentLayout.depth, info->CurrentLayout.bitsPerPixel, info->CurrentLayout.pixel_code)); } info->pitch = ((info->CurrentLayout.displayWidth / 8) * (info->CurrentLayout.pixel_bytes == 3 ? 3 : 1)); RADEONTRACE(("Pitch for acceleration = %d\n", info->pitch)); info->dp_gui_master_cntl = ((info->datatype << RADEON_GMC_DST_DATATYPE_SHIFT) | RADEON_GMC_CLR_CMP_CNTL_DIS); #ifdef XF86DRI info->sc_left = 0x00000000; info->sc_right = RADEON_DEFAULT_SC_RIGHT_MAX; info->sc_top = 0x00000000; info->sc_bottom = RADEON_DEFAULT_SC_BOTTOM_MAX; info->re_top_left = 0x00000000; info->re_width_height = ((0x7ff << RADEON_RE_WIDTH_SHIFT) | (0x7ff << RADEON_RE_HEIGHT_SHIFT)); info->aux_sc_cntl = 0x00000000; #endif RADEONEngineRestore(pScrn); } #define ACCEL_MMIO #define ACCEL_PREAMBLE() unsigned char *RADEONMMIO = info->MMIO #define BEGIN_ACCEL(n) RADEONWaitForFifo(pScrn, (n)) #define OUT_ACCEL_REG(reg, val) OUTREG(reg, val) #define FINISH_ACCEL() #ifdef RENDER #include "radeon_render.c" #endif #include "radeon_accelfuncs.c" #undef ACCEL_MMIO #undef ACCEL_PREAMBLE #undef BEGIN_ACCEL #undef OUT_ACCEL_REG #undef FINISH_ACCEL #ifdef XF86DRI #define ACCEL_CP #define ACCEL_PREAMBLE() \ RING_LOCALS; \ RADEONCP_REFRESH(pScrn, info) #define BEGIN_ACCEL(n) BEGIN_RING(2*(n)) #define OUT_ACCEL_REG(reg, val) OUT_RING_REG(reg, val) #define FINISH_ACCEL() ADVANCE_RING() #ifdef RENDER #include "radeon_render.c" #endif #include "radeon_accelfuncs.c" #undef ACCEL_CP #undef ACCEL_PREAMBLE #undef BEGIN_ACCEL #undef OUT_ACCEL_REG #undef FINISH_ACCEL /* Stop the CP */ int RADEONCPStop(ScrnInfoPtr pScrn, RADEONInfoPtr info) { drmRadeonCPStop stop; int ret, i; stop.flush = 1; stop.idle = 1; ret = drmCommandWrite(info->drmFD, DRM_RADEON_CP_STOP, &stop, sizeof(drmRadeonCPStop)); if (ret == 0) { return 0; } else if (errno != EBUSY) { return -errno; } stop.flush = 0; i = 0; do { ret = drmCommandWrite(info->drmFD, DRM_RADEON_CP_STOP, &stop, sizeof(drmRadeonCPStop)); } while (ret && errno == EBUSY && i++ < RADEON_IDLE_RETRY); if (ret == 0) { return 0; } else if (errno != EBUSY) { return -errno; } stop.idle = 0; if (drmCommandWrite(info->drmFD, DRM_RADEON_CP_STOP, &stop, sizeof(drmRadeonCPStop))) { return -errno; } else { return 0; } } /* Get an indirect buffer for the CP 2D acceleration commands */ drmBufPtr RADEONCPGetBuffer(ScrnInfoPtr pScrn) { RADEONInfoPtr info = RADEONPTR(pScrn); drmDMAReq dma; drmBufPtr buf = NULL; int indx = 0; int size = 0; int i = 0; int ret; #if 0 /* FIXME: pScrn->pScreen has not been initialized when this is first * called from RADEONSelectBuffer via RADEONDRICPInit. We could use * the screen index from pScrn, which is initialized, and then get * the screen from screenInfo.screens[index], but that is a hack. */ dma.context = DRIGetContext(pScrn->pScreen); #else /* This is the X server's context */ dma.context = 0x00000001; #endif dma.send_count = 0; dma.send_list = NULL; dma.send_sizes = NULL; dma.flags = 0; dma.request_count = 1; dma.request_size = RADEON_BUFFER_SIZE; dma.request_list = &indx; dma.request_sizes = &size; dma.granted_count = 0; while (1) { do { ret = drmDMA(info->drmFD, &dma); if (ret && ret != -EBUSY) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "%s: CP GetBuffer %d\n", __FUNCTION__, ret); } } while ((ret == -EBUSY) && (i++ < RADEON_TIMEOUT)); if (ret == 0) { buf = &info->buffers->list[indx]; buf->used = 0; if (RADEON_VERBOSE) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, " GetBuffer returning %d %p\n", buf->idx, buf->address); } return buf; } xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "GetBuffer timed out, resetting engine...\n"); RADEONEngineReset(pScrn); RADEONEngineRestore(pScrn); /* Always restart the engine when doing CP 2D acceleration */ RADEONCP_RESET(pScrn, info); RADEONCP_START(pScrn, info); } } /* Flush the indirect buffer to the kernel for submission to the card */ void RADEONCPFlushIndirect(ScrnInfoPtr pScrn, int discard) { RADEONInfoPtr info = RADEONPTR(pScrn); drmBufPtr buffer = info->indirectBuffer; int start = info->indirectStart; drmRadeonIndirect indirect; if (!buffer) return; if (start == buffer->used && !discard) return; if (RADEON_VERBOSE) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Flushing buffer %d\n", buffer->idx); } indirect.idx = buffer->idx; indirect.start = start; indirect.end = buffer->used; indirect.discard = discard; drmCommandWriteRead(info->drmFD, DRM_RADEON_INDIRECT, &indirect, sizeof(drmRadeonIndirect)); if (discard) { info->indirectBuffer = RADEONCPGetBuffer(pScrn); info->indirectStart = 0; } else { /* Start on a double word boundary */ info->indirectStart = buffer->used = (buffer->used + 7) & ~7; if (RADEON_VERBOSE) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, " Starting at %d\n", info->indirectStart); } } } /* Flush and release the indirect buffer */ void RADEONCPReleaseIndirect(ScrnInfoPtr pScrn) { RADEONInfoPtr info = RADEONPTR(pScrn); drmBufPtr buffer = info->indirectBuffer; int start = info->indirectStart; drmRadeonIndirect indirect; info->indirectBuffer = NULL; info->indirectStart = 0; if (!buffer) return; if (RADEON_VERBOSE) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Releasing buffer %d\n", buffer->idx); } indirect.idx = buffer->idx; indirect.start = start; indirect.end = buffer->used; indirect.discard = 1; drmCommandWriteRead(info->drmFD, DRM_RADEON_INDIRECT, &indirect, sizeof(drmRadeonIndirect)); } #endif /* Initialize XAA for supported acceleration and also initialize the * graphics hardware for acceleration */ Bool RADEONAccelInit(ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; RADEONInfoPtr info = RADEONPTR(pScrn); XAAInfoRecPtr a; if (!(a = info->accel = XAACreateInfoRec())) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "XAACreateInfoRec Error\n"); return FALSE; } #ifdef XF86DRI if (info->directRenderingEnabled) RADEONAccelInitCP(pScreen, a); else #endif RADEONAccelInitMMIO(pScreen, a); RADEONEngineInit(pScrn); if (!XAAInit(pScreen, a)) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "XAAInit Error\n"); return FALSE; } return TRUE; }