/*
 * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and
 *                VA Linux Systems Inc., Fremont, California.
 *
 * All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation on the rights to use, copy, modify, merge,
 * publish, distribute, sublicense, and/or sell copies of the Software,
 * and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the
 * next paragraph) shall be included in all copies or substantial
 * portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NON-INFRINGEMENT.  IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR
 * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#define RADEONCTRACE(x)
/*#define RADEONCTRACE(x) RADEONTRACE(x) */

/*
 * Authors:
 *   Kevin E. Martin <martin@xfree86.org>
 *   Rickard E. Faith <faith@valinux.com>
 *
 * References:
 *
 * !!!! FIXME !!!!
 *   RAGE 128 VR/ RAGE 128 GL Register Reference Manual (Technical
 *   Reference Manual P/N RRG-G04100-C Rev. 0.04), ATI Technologies: April
 *   1999.
 *
 *   RAGE 128 Software Development Manual (Technical Reference Manual P/N
 *   SDK-G04000 Rev. 0.01), ATI Technologies: June 1999.
 *
 */

				/* Driver data structures */
#include "radeon.h"
#include "radeon_version.h"
#include "radeon_reg.h"
#include "radeon_macros.h"

				/* X and server generic header files */
#include "xf86.h"

#define CURSOR_WIDTH	64
#define CURSOR_HEIGHT	64

/*
 * The cursor bits are always 32bpp.  On MSBFirst buses,
 * configure byte swapping to swap 32 bit units when writing
 * the cursor image.  Byte swapping must always be returned
 * to its previous value before returning.
 */
#if X_BYTE_ORDER == X_BIG_ENDIAN

#define CURSOR_SWAPPING_DECL_MMIO   unsigned char *RADEONMMIO = info->MMIO;
#define CURSOR_SWAPPING_START() \
  do { \
    OUTREG(RADEON_SURFACE_CNTL, \
	   (info->ModeReg.surface_cntl | \
	     RADEON_NONSURF_AP0_SWP_32BPP | RADEON_NONSURF_AP1_SWP_32BPP) & \
	   ~(RADEON_NONSURF_AP0_SWP_16BPP | RADEON_NONSURF_AP1_SWP_16BPP)); \
  } while (0)
#define CURSOR_SWAPPING_END()	(OUTREG(RADEON_SURFACE_CNTL, \
					info->ModeReg.surface_cntl))

#else

#define CURSOR_SWAPPING_DECL_MMIO
#define CURSOR_SWAPPING_START()
#define CURSOR_SWAPPING_END()

#endif

void
radeon_crtc_show_cursor (xf86CrtcPtr crtc)
{
    ScrnInfoPtr pScrn = crtc->scrn;
    RADEONCrtcPrivatePtr radeon_crtc = crtc->driver_private;
    int crtc_id = radeon_crtc->crtc_id;
    RADEONInfoPtr      info       = RADEONPTR(pScrn);
    unsigned char     *RADEONMMIO = info->MMIO;

    if (crtc_id == 0) 
	OUTREGP(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_CUR_EN | 2 << 20, 
		~(RADEON_CRTC_CUR_EN | RADEON_CRTC_CUR_MODE_MASK));
    else if (crtc_id == 1)
	OUTREGP(RADEON_CRTC2_GEN_CNTL, RADEON_CRTC2_CUR_EN | 2 << 20,
		~(RADEON_CRTC2_CUR_EN | RADEON_CRTC2_CUR_MODE_MASK));
}

void
radeon_crtc_hide_cursor (xf86CrtcPtr crtc)
{
    ScrnInfoPtr pScrn = crtc->scrn;
    RADEONCrtcPrivatePtr radeon_crtc = crtc->driver_private;
    int crtc_id = radeon_crtc->crtc_id;
    RADEONInfoPtr      info       = RADEONPTR(pScrn);
    unsigned char     *RADEONMMIO = info->MMIO;

    if (crtc_id == 0)
	OUTREGP(RADEON_CRTC_GEN_CNTL, 0, ~RADEON_CRTC_CUR_EN);
    else if (crtc_id == 1)
	OUTREGP(RADEON_CRTC2_GEN_CNTL, 0, ~RADEON_CRTC2_CUR_EN);


}

void
radeon_crtc_set_cursor_position (xf86CrtcPtr crtc, int x, int y)
{
    ScrnInfoPtr pScrn = crtc->scrn;
    RADEONCrtcPrivatePtr radeon_crtc = crtc->driver_private;
    int crtc_id = radeon_crtc->crtc_id;
    RADEONInfoPtr      info       = RADEONPTR(pScrn);
    unsigned char     *RADEONMMIO = info->MMIO;
    int xorigin = 0, yorigin = 0;
    int stride = 256;
    DisplayModePtr mode = &crtc->mode;

    if (x < 0)                        xorigin = -x+1;
    if (y < 0)                        yorigin = -y+1;
    if (xorigin >= CURSOR_WIDTH)  xorigin = CURSOR_WIDTH - 1;
    if (yorigin >= CURSOR_HEIGHT) yorigin = CURSOR_HEIGHT - 1;

    if (mode->Flags & V_INTERLACE)
	y /= 2;
    else if (mode->Flags & V_DBLSCAN)
	y *= 2;

    if (crtc_id == 0) {
	OUTREG(RADEON_CUR_HORZ_VERT_OFF,  (RADEON_CUR_LOCK
					   | (xorigin << 16)
					   | yorigin));
	OUTREG(RADEON_CUR_HORZ_VERT_POSN, (RADEON_CUR_LOCK
					   | ((xorigin ? 0 : x) << 16)
					   | (yorigin ? 0 : y)));
	RADEONCTRACE(("cursor_offset: 0x%x, yorigin: %d, stride: %d, temp %08X\n",
			info->cursor_offset + pScrn->fbOffset, yorigin, stride, temp));
	OUTREG(RADEON_CUR_OFFSET,
		info->cursor_offset + pScrn->fbOffset + yorigin * stride);
    } else if (crtc_id == 1) {
	OUTREG(RADEON_CUR2_HORZ_VERT_OFF,  (RADEON_CUR2_LOCK
					    | (xorigin << 16)
					    | yorigin));
	OUTREG(RADEON_CUR2_HORZ_VERT_POSN, (RADEON_CUR2_LOCK
					   | ((xorigin ? 0 : x) << 16)
					   | (yorigin ? 0 : y)));
	RADEONCTRACE(("cursor_offset2: 0x%x, yorigin: %d, stride: %d, temp %08X\n",
			info->cursor_offset + pScrn->fbOffset, yorigin, stride, temp));
	OUTREG(RADEON_CUR2_OFFSET,
		info->cursor_offset + pScrn->fbOffset + yorigin * stride);
    }

}

void
radeon_crtc_set_cursor_colors (xf86CrtcPtr crtc, int bg, int fg)
{
    ScrnInfoPtr pScrn = crtc->scrn;
    RADEONInfoPtr      info       = RADEONPTR(pScrn);
    CARD32        *pixels     = (CARD32 *)(pointer)(info->FB + info->cursor_offset + pScrn->fbOffset);
    int            pixel, i;
    CURSOR_SWAPPING_DECL_MMIO

    RADEONCTRACE(("RADEONSetCursorColors\n"));

#ifdef ARGB_CURSOR
    /* Don't recolour cursors set with SetCursorARGB. */
    if (info->cursor_argb)
       return;
#endif

    fg |= 0xff000000;
    bg |= 0xff000000;

    /* Don't recolour the image if we don't have to. */
    if (fg == info->cursor_fg && bg == info->cursor_bg)
       return;

    CURSOR_SWAPPING_START();

    /* Note: We assume that the pixels are either fully opaque or fully
     * transparent, so we won't premultiply them, and we can just
     * check for non-zero pixel values; those are either fg or bg
     */
    for (i = 0; i < CURSOR_WIDTH * CURSOR_HEIGHT; i++, pixels++)
       if ((pixel = *pixels))
           *pixels = (pixel == info->cursor_fg) ? fg : bg;

    CURSOR_SWAPPING_END();
    info->cursor_fg = fg;
    info->cursor_bg = bg;
}

#ifdef ARGB_CURSOR

void
radeon_crtc_load_cursor_argb (xf86CrtcPtr crtc, CARD32 *image)
{
    ScrnInfoPtr pScrn = crtc->scrn;
    RADEONInfoPtr  info       = RADEONPTR(pScrn);
    unsigned char *RADEONMMIO = info->MMIO;
    CARD32        *d          = (CARD32 *)(pointer)(info->FB + info->cursor_offset + pScrn->fbOffset);
#if 0
    int            x, y, w, h;
    CARD32	  *i;
#endif

    RADEONCTRACE(("RADEONLoadCursorARGB\n"));

    info->cursor_argb = TRUE;

    CURSOR_SWAPPING_START();


    memcpy (d, image, CURSOR_HEIGHT * CURSOR_WIDTH * 4);
#if 0
    w = pCurs->bits->width;
    if (w > CURSOR_WIDTH)
	w = CURSOR_WIDTH;
    h = pCurs->bits->height;
    if (h > CURSOR_HEIGHT)
	h = CURSOR_HEIGHT;
    for (y = 0; y < h; y++)
    {
	i = image;
	image += pCurs->bits->width;
	for (x = 0; x < w; x++)
	    *d++ = *i++;
	/* pad to the right with transparent */
	for (; x < CURSOR_WIDTH; x++)
	    *d++ = 0;
    }
    /* pad below with transparent */
    for (; y < CURSOR_HEIGHT; y++)
	for (x = 0; x < CURSOR_WIDTH; x++)
	    *d++ = 0;
#endif

    CURSOR_SWAPPING_END ();
}

#endif


/* Initialize hardware cursor support. */
Bool RADEONCursorInit(ScreenPtr pScreen)
{
    ScrnInfoPtr        pScrn   = xf86Screens[pScreen->myNum];
    RADEONInfoPtr      info    = RADEONPTR(pScrn);
    int                width;
    int		       width_bytes;
    int                height;
    int                size_bytes;


    size_bytes                = CURSOR_WIDTH * 4 * CURSOR_HEIGHT;
    width                     = pScrn->displayWidth;
    width_bytes		      = width * (pScrn->bitsPerPixel / 8);
    height                    = (size_bytes + width_bytes - 1) / width_bytes;

#ifdef USE_XAA
    if (!info->useEXA) {
	FBAreaPtr          fbarea;

	fbarea = xf86AllocateOffscreenArea(pScreen, width, height,
					   256, NULL, NULL, NULL);

	if (!fbarea) {
	    info->cursor_offset    = 0;
	    xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
		   "Hardware cursor disabled"
		   " due to insufficient offscreen memory\n");
	} else {
	    info->cursor_offset  = RADEON_ALIGN((fbarea->box.x1 +
						fbarea->box.y1 * width) *
						info->CurrentLayout.pixel_bytes,
						256);
	    info->cursor_end = info->cursor_offset + size_bytes;
	}
	RADEONCTRACE(("RADEONCursorInit (0x%08x-0x%08x)\n",
		    info->cursor_offset, info->cursor_end));
    }
#endif

    return xf86_cursors_init (pScreen, CURSOR_WIDTH, CURSOR_HEIGHT,
			      (HARDWARE_CURSOR_TRUECOLOR_AT_8BPP |
#if X_BYTE_ORDER == X_BIG_ENDIAN
				 /* this is a lie --
				  * HARDWARE_CURSOR_BIT_ORDER_MSBFIRST
				  * actually inverts the bit order, so
				  * this switches to LSBFIRST
				  */
			       HARDWARE_CURSOR_BIT_ORDER_MSBFIRST |
#endif
			       HARDWARE_CURSOR_AND_SOURCE_WITH_MASK |
			       HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_1 |
			       HARDWARE_CURSOR_ARGB));
}