diff options
Diffstat (limited to 'src')
39 files changed, 83 insertions, 83 deletions
diff --git a/src/cim/cim_defs.h b/src/cim/cim_defs.h index 9084a07..a81d5bd 100644 --- a/src/cim/cim_defs.h +++ b/src/cim/cim_defs.h @@ -315,7 +315,7 @@ /*-----------------------------------------------------------------*/ /* STRING MACROS */ /* These macros are included to facilitate the optimization of */ -/* routines that write or copy large amounts of data. Two vesions */ +/* routines that write or copy large amounts of data. Two versions */ /* of these macros are included. One is intended for operating */ /* systems that allow the use of inline assembly, while the other */ /* is a pure C implementation for stricter operating systems. */ diff --git a/src/cim/cim_df.c b/src/cim/cim_df.c index d3c1149..61a77d1 100644 --- a/src/cim/cim_df.c +++ b/src/cim/cim_df.c @@ -138,7 +138,7 @@ df_configure_video_source(DF_VIDEO_SOURCE_PARAMS * video_source_odd, /* STORE THE DESIRED SCALING PROCEDURE */ /* Cimarron supports two modes when programming the scale and position */ /* of the video window. The first mode is designed to implicitly apply */ - /* the graphics scale to any video operations. The second applys the */ + /* the graphics scale to any video operations. The second applies the */ /* video unchanged, allowing complete control by the user. To allow */ /* visibility between modules, the current mode is stored in a spare */ /* bit in the DF miscellaneous register. */ @@ -866,7 +866,7 @@ df_set_video_enable(int enable, unsigned long flags) WRITE_REG32(DC3_GENERAL_CFG, (gcfg & ~DC3_GCFG_VIDE)); /* DISABLE COLOR KEY WINDOW WHEN VIDEO IS INACTIVE */ - /* To mimic legacy functionality, we disble color keying */ + /* To mimic legacy functionality, we disable color keying */ /* when the video window is not active. We will restore */ /* the enable when video is re-enabled if the appropriate */ /* bit is set in display config. */ diff --git a/src/cim/cim_msr.c b/src/cim/cim_msr.c index 6dd4183..d43bc4b 100644 --- a/src/cim/cim_msr.c +++ b/src/cim/cim_msr.c @@ -43,7 +43,7 @@ GEODELINK_NODE msr_dev_lookup[MSR_DEVICE_EMPTY]; /*--------------------------------------------------------------------------- * msr_init_table * - * This routine intializes the internal MSR table in Cimarron. This table is + * This routine initializes the internal MSR table in Cimarron. This table is * used for any MSR device accesses. *--------------------------------------------------------------------------*/ diff --git a/src/cim/cim_parm.h b/src/cim/cim_parm.h index a8fa9b0..de6d2b6 100644 --- a/src/cim/cim_parm.h +++ b/src/cim/cim_parm.h @@ -109,7 +109,7 @@ typedef struct tagGeodeLinkNode { /*---------------------------------------------*/ /* QWORD DATA STRUCTURE */ -/* 64-bit data structure for MSR acess. */ +/* 64-bit data structure for MSR access. */ /*---------------------------------------------*/ typedef struct tagQ_WORD { diff --git a/src/cim/cim_regs.h b/src/cim/cim_regs.h index f0bc95a..a120a52 100644 --- a/src/cim/cim_regs.h +++ b/src/cim/cim_regs.h @@ -832,7 +832,7 @@ typedef struct tagPLLFrequency { /*----------------------------------------------------------------*/ /*----------------------------*/ -/* STATIC GEODELINK ADRESSES */ +/* STATIC GEODELINK ADDRESSES */ /*----------------------------*/ #define MSR_ADDRESS_GLIU0 0x10000000 diff --git a/src/cim/cim_vg.c b/src/cim/cim_vg.c index 784519d..46984b5 100644 --- a/src/cim/cim_vg.c +++ b/src/cim/cim_vg.c @@ -901,7 +901,7 @@ vg_set_custom_mode(VG_DISPLAY_MODE * mode_params, int bpp) == VG_MODEFLAG_INT_FLICKER) || (irq_ctl & DC3_IRQFILT_GFX_FILT_EN)) { /* HIGH BANDWIDTH */ - /* Set agressive watermarks and disallow forced low priority */ + /* Set aggressive watermarks and disallow forced low priority */ gcfg |= 0x0000BA01; dcfg |= 0x000EA000; diff --git a/src/cim/cim_vip.c b/src/cim/cim_vip.c index a88b65f..f37a394 100644 --- a/src/cim/cim_vip.c +++ b/src/cim/cim_vip.c @@ -207,7 +207,7 @@ vip_update_601_params(VIP_601PARAMS * buffer) * * The new buffer addresses are written to the hardware registers although * they may not be latched immediately. Calling vip_is_buffer_update_latched - * allows the determination of whether the update has occured. + * allows the determination of whether the update has occurred. * * Review the Cimarron VIP API documentation to determine which buffer * addresses are latched immediately. @@ -1085,7 +1085,7 @@ vip_restore_state(VIPSTATEBUFFER * restore_buffer) * * This routine returns the current interrupt state of the system. The * rv can be tested with the following flags to determine if the appropriate - * event has occured. + * event has occurred. *--------------------------------------------------------------------------*/ unsigned long diff --git a/src/durango.c b/src/durango.c index fbca7b2..be494ed 100644 --- a/src/durango.c +++ b/src/durango.c @@ -24,7 +24,7 @@ * */ /* The previous version of this file was way more complex then it should have - been - remove the unnessesary #defines and routines, and concentrate on + been - remove the unnecessary #defines and routines, and concentrate on Linux for now. */ diff --git a/src/geode.h b/src/geode.h index 1b144ff..3dd3e15 100644 --- a/src/geode.h +++ b/src/geode.h @@ -215,7 +215,7 @@ typedef struct _geodeRec { unsigned long CursorStartOffset; int Pitch; /* display FB pitch */ - int displaySize; /* The size of the visibile area */ + int displaySize; /* The size of the visible area */ ExaOffscreenArea *shadowArea; @@ -285,7 +285,7 @@ typedef struct _geodeRec { int PanelX; int PanelY; - int displayPitch; /* The pitch ofthe visible area */ + int displayPitch; /* The pitch of the visible area */ int displayOffset; /* The offset of the visible area */ DisplayModePtr curMode; diff --git a/src/geode_driver.c b/src/geode_driver.c index 9cd0af9..e16ea72 100644 --- a/src/geode_driver.c +++ b/src/geode_driver.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2006 Avanced Micro Devices, Inc. + * Copyright (c) 2006 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), @@ -414,7 +414,7 @@ AmdPciProbe(DriverPtr driver, * * Comments :This should be minimal probe and it should under no * circumstances change the state of the hardware.Don't do - * any intiallizations other than the required + * any initializations other than the required * ScreenInforec. *---------------------------------------------------------------------------- */ diff --git a/src/gfx/disp_gu1.c b/src/gfx/disp_gu1.c index 2cb1ed5..a03c754 100644 --- a/src/gfx/disp_gu1.c +++ b/src/gfx/disp_gu1.c @@ -789,11 +789,11 @@ gfx_set_display_offset(unsigned long offset) WRITE_REG32(DC_UNLOCK, DC_UNLOCK_VALUE); /* START ADDRESS EFFECTS DISPLAY COMPRESSION */ - /* Disable compression for non-zero start addresss values. */ - /* Enable compression if offset is zero and comression is intended to */ - /* be enabled from a previous call to "gfx_set_compression_enable". */ - /* Compression should be disabled BEFORE the offset is changed */ - /* and enabled AFTER the offset is changed. */ + /* Disable compression for non-zero start address values. */ + /* Enable compression if offset is zero and compression is intended to */ + /* be enabled from a previous call to "gfx_set_compression_enable". */ + /* Compression should be disabled BEFORE the offset is changed */ + /* and enabled AFTER the offset is changed. */ if (offset == 0) { WRITE_REG32(DC_FB_ST_OFFSET, offset); if (gfx_compression_enabled) { diff --git a/src/gfx/disp_gu2.c b/src/gfx/disp_gu2.c index f105cc1..1f0bbb6 100644 --- a/src/gfx/disp_gu2.c +++ b/src/gfx/disp_gu2.c @@ -613,11 +613,11 @@ gfx_set_display_offset(unsigned long offset) WRITE_REG32(MDC_UNLOCK, MDC_UNLOCK_VALUE); /* START ADDRESS EFFECTS DISPLAY COMPRESSION */ - /* Disable compression for non-zero start addresss values. */ - /* Enable compression if offset is zero and comression is intended to */ - /* be enabled from a previous call to "gfx_set_compression_enable". */ - /* Compression should be disabled BEFORE the offset is changed */ - /* and enabled AFTER the offset is changed. */ + /* Disable compression for non-zero start address values. */ + /* Enable compression if offset is zero and compression is intended to */ + /* be enabled from a previous call to "gfx_set_compression_enable". */ + /* Compression should be disabled BEFORE the offset is changed */ + /* and enabled AFTER the offset is changed. */ if (offset == 0) { WRITE_REG32(MDC_FB_ST_OFFSET, offset); if (gfx_compression_enabled) { @@ -1100,7 +1100,7 @@ int gfx_set_compression_enable(int enable) #endif { - /* SET GLOBAL VARIABLE FOR INDENDED STATE */ + /* SET GLOBAL VARIABLE FOR INTENDED STATE */ /* Compression can only be enabled for non-zero start address values. */ /* Keep state to enable compression on start address changes. */ diff --git a/src/gfx/gfx_disp.c b/src/gfx/gfx_disp.c index 62238b2..5124d76 100644 --- a/src/gfx/gfx_disp.c +++ b/src/gfx/gfx_disp.c @@ -1802,7 +1802,7 @@ gfx_get_frame_buffer_line_size(void) /*--------------------------------------------------------------------------- * gfx_get_display_mode - * get the curent mode set, + * get the current mode set, * return the supported mode on success, -1 on fail *--------------------------------------------------------------------------- */ @@ -1824,7 +1824,7 @@ gfx_get_display_mode(int *xres, int *yres, int *bpp, int *hz) /*--------------------------------------------------------------------------- * gfx_get_display_details - * given the mode get's the resoultion details, width, height, freq + * given the mode gets the resolution details, width, height, freq *--------------------------------------------------------------------------- */ int diff --git a/src/gfx/gfx_init.c b/src/gfx/gfx_init.c index 648d9cb..597eccf 100644 --- a/src/gfx/gfx_init.c +++ b/src/gfx/gfx_init.c @@ -149,7 +149,7 @@ gfx_detect_chip(void) /*---------------------------------------------------------------------------- * gfx_detect_cpu * - * This routine returns the type and revison of the CPU. If a Geode + * This routine returns the type and revision of the CPU. If a Geode * processor is not present, the routine returns zero. * * The return value is as follows: diff --git a/src/gfx/gfx_priv.h b/src/gfx/gfx_priv.h index 6a2218e..4f63f62 100644 --- a/src/gfx/gfx_priv.h +++ b/src/gfx/gfx_priv.h @@ -1011,7 +1011,7 @@ int fs450_set_color(int color); int fs450_get_brightness(int *p_brightness); int fs450_set_brightness(int brightness); int fs450_get_contrast(int *p_contrast); -int fs450_set_contrast(int constrast); +int fs450_set_contrast(int contrast); int fs450_get_yc_filter(unsigned int *p_yc_filter); int fs450_set_yc_filter(unsigned int yc_filter); int fs450_get_aps_trigger_bits(unsigned int *p_trigger_bits); diff --git a/src/gfx/gfx_rtns.h b/src/gfx/gfx_rtns.h index bfcfe9f..2087f21 100644 --- a/src/gfx/gfx_rtns.h +++ b/src/gfx/gfx_rtns.h @@ -63,7 +63,7 @@ extern "C" { extern unsigned char *gfx_phys_spptr; extern unsigned char *gfx_phys_gpptr; -/* DURANGO VARIBLES FOR RUNTIME SELECTION AND POSSIBLE VALUES */ +/* DURANGO VARIABLES FOR RUNTIME SELECTION AND POSSIBLE VALUES */ extern int gfx_display_type; #define GFX_DISPLAY_TYPE_GU1 0x0001 @@ -603,7 +603,7 @@ extern "C" { int gfx_get_brightness(int *p_brightness); int gfx_set_brightness(int brightness); int gfx_get_contrast(int *p_contrast); - int gfx_set_contrast(int constrast); + int gfx_set_contrast(int contrast); int gfx_get_yc_filter(unsigned int *p_yc_filter); int gfx_set_yc_filter(unsigned int yc_filter); int gfx_get_aps_trigger_bits(unsigned int *p_trigger_bits); diff --git a/src/gfx/gfx_vid.c b/src/gfx/gfx_vid.c index 15f0048..0dd7847 100644 --- a/src/gfx/gfx_vid.c +++ b/src/gfx/gfx_vid.c @@ -159,7 +159,7 @@ int gfx_set_screen_enable(int enable); /* forward declaration #include "vid_1200.c" #endif -/* INLUDE SUPPORT FOR REDCLOUD, IF SPECIFIED. */ +/* INCLUDE SUPPORT FOR REDCLOUD, IF SPECIFIED. */ #if GFX_VIDEO_REDCLOUD #include "vid_rdcl.c" diff --git a/src/gfx/msr_rdcl.c b/src/gfx/msr_rdcl.c index 2f85e6a..1a01be7 100644 --- a/src/gfx/msr_rdcl.c +++ b/src/gfx/msr_rdcl.c @@ -437,8 +437,8 @@ redcloud_find_msr_device(MSR * pDev) /*-------------------------------------------------------------------- * gfx_id_msr_device * - * This routine handles reading the capabilities MSR register (typically - * 0x2000) and checking if the 'id' field matchs pDev.Id. This routine is + * This routine handles reading the capabilities MSR register (typically + * 0x2000) and checking if the 'id' field matches pDev.Id. This routine is * used by applications/drivers that need to extend the list of known * MBUS devices beyond those known by Durango. * diff --git a/src/gfx/release.txt b/src/gfx/release.txt index 805b847..25f6803 100644 --- a/src/gfx/release.txt +++ b/src/gfx/release.txt @@ -333,7 +333,7 @@ FUNCTIONAL CHANGES * Added support for 1152x864 desktop resolution on a flat panel. * Added 24BPP support for large display modes. * Modified gfx_set_video_scale such that an identity scale is now default. -* Modifed flat panel modeset code to dynamically determine the size of the mode table. +* Modified flat panel modeset code to dynamically determine the size of the mode table. * Added support for Carmel Rev D2. ============================================================================= @@ -462,7 +462,7 @@ FUNCTIONAL CHANGES * Added functions gfx_enable_softvga, dfx_disable_softvga. * Added code optimization in rendering loops to use 32 bit writes where possible. * Added gfx_is_mode_supported to query if given mode supported by the h/w. -* Added Flat panel support, realy testing with panel done only for 800x600. +* Added Flat panel support, really testing with panel done only for 800x600. * Removed subtraction of 16 from gfx_set_compression_size. * Added version.h file to reflect the version of the durango used. @@ -475,7 +475,7 @@ FUNCTIONAL CHANGES ----------------------------------------------------------------------------- * Verified Xfree86 driver version 1.1 under FreeBSD and Linux. * Added automatic detection of BLT buffer bases in "gfx_set_bpp" routine. -* Fixed improper setting of VGA attrubute controller index register. +* Fixed improper setting of VGA attribute controller index register. * Moved "gfx_get_display_bpp" to always be included. * Moved "gfx_get_hactive" and "gfx_get_vactive" to always be included. * Clipped video source size if off bottom or right side. @@ -503,7 +503,7 @@ FUNCTIONAL CHANGES ----------------------------------------------------------------------------- * Verified display modes and graphics rendering on SC1200. * Updated PLL table for SC1200 to set modes. -* DURANGO.C FILE CHANGE!: Modifed and added compiler definitions. +* DURANGO.C FILE CHANGE!: Modified and added compiler definitions. * Split gfx_disp.c file into gu1_disp.c and gu2_disp.c * Split gfx_rndr.c file into gu1_rndr.c and gu2_rndr.c * Split gfx_vid.c file into vid_5530.c, vid_1400.c, and vid_1200.c @@ -567,7 +567,7 @@ FUNCTIONAL CHANGES ----------------------------------------------------------------------------- FUNCTIONAL CHANGES ----------------------------------------------------------------------------- -* Added video port, video decoder, I2C, and hardware query rouines. +* Added video port, video decoder, I2C, and hardware query routines. * New files: gfx_vip.c, gfx_dcdr.c, gfx_i2c.c, gfx_read.c. ============================================================================= @@ -581,7 +581,7 @@ FUNCTIONAL CHANGES * Added "gfx_get_vid_register_base" and "gfx_get_vip_register_base". * Added initial PLL table for SC1400. * Verified mode set and video overlay routines work correctly on SC1400. -* Updated initilization routines. +* Updated initialization routines. * Added update of graphics engine in "gfx_set_display_pitch". ============================================================================= diff --git a/src/gfx/rndr_gu1.c b/src/gfx/rndr_gu1.c index 57fe9b1..6c16c93 100644 --- a/src/gfx/rndr_gu1.c +++ b/src/gfx/rndr_gu1.c @@ -407,7 +407,7 @@ gfx_set_raster_operation(unsigned char rop) GFXsavedRop = rop16; /* SET FLAG INDICATING ROP REQUIRES DESTINATION DATA */ - /* True if even bits (0:2:4:6) do not equal the correspinding */ + /* True if even bits (0:2:4:6) do not equal the corresponding */ /* even bits (1:3:5:7). */ GFXusesDstData = ((rop & 0x55) ^ ((rop >> 1) & 0x55)); diff --git a/src/gfx/rndr_gu2.c b/src/gfx/rndr_gu2.c index a8126fb..ed327b3 100644 --- a/src/gfx/rndr_gu2.c +++ b/src/gfx/rndr_gu2.c @@ -137,7 +137,7 @@ gfx_set_bpp(unsigned short bpp) { GFXbpp = bpp; - /* COVERT TO BPP/FORMAT VALUE */ + /* CONVERT TO BPP/FORMAT VALUE */ /* Save in global to combine with ROP later. */ /* Could write register here and then use byte access for */ /* the ROP, but would need to set other 24 bits to make */ diff --git a/src/gfx/tv_fs450.c b/src/gfx/tv_fs450.c index 24e7446..99194b2 100644 --- a/src/gfx/tv_fs450.c +++ b/src/gfx/tv_fs450.c @@ -78,8 +78,8 @@ const S_SET_DESCRIP *gcc_regs(void); #define HOUSTON_IHO 0x00 /* Input Horizontal Offset */ #define HOUSTON_IVO 0x02 /* Input Vertical Offset */ #define HOUSTON_IHA 0x04 /* Input Horizontal Active Width */ -#define HOUSTON_VSC 0x06 /* Vertical Scaling Coeficient */ -#define HOUSTON_HSC 0x08 /* Horizontal Scaling Coeficient */ +#define HOUSTON_VSC 0x06 /* Vertical Scaling Coefficient */ +#define HOUSTON_HSC 0x08 /* Horizontal Scaling Coefficient */ #define HOUSTON_BYP 0x0A /* Bypass Register */ #define HOUSTON_CR 0x0C /* Control Register */ #define HOUSTON_SP 0x0E /* Status */ @@ -1027,7 +1027,7 @@ gfx_set_tv_enable(int on) /*if turning off... */ if (!on) { - /*reenable vga. */ + /*re-enable vga. */ PLAL_EnableVga(); /*power down houston */ @@ -1477,13 +1477,13 @@ gfx_get_contrast(int *p_contrast) #if GFX_TV_DYNAMIC int -fs450_set_contrast(int constrast) +fs450_set_contrast(int contrast) #else int -gfx_set_contrast(int constrast) +gfx_set_contrast(int contrast) #endif { - d.contrast = range_limit(constrast, 0, 100); + d.contrast = range_limit(contrast, 0, 100); return write_config(REQ_BRIGHTNESS_CONTRAST); } @@ -3239,7 +3239,7 @@ PLAL_SetTVTimingRegisters(const S_TIMING_SPECS * p_specs) reg = ((p_specs->v_sync - 1) << 16) | (p_specs->v_sync - 2); WriteGx(DC_FP_V_TIMING, reg); - /*timing config, reenable all dclk stuff. */ + /*timing config, re-enable all dclk stuff. */ reg = ReadGx(DC_TIMING_CFG); reg |= GX_TGEN; WriteGx(DC_TIMING_CFG, reg); diff --git a/src/gfx/tv_fs450.h b/src/gfx/tv_fs450.h index 4da7a21..1d01cff 100644 --- a/src/gfx/tv_fs450.h +++ b/src/gfx/tv_fs450.h @@ -131,7 +131,7 @@ extern "C" { /* brightness is a percentage, 0 to 100 */ int FS450_get_contrast(int *p_contrast); - int FS450_set_contrast(int constrast); + int FS450_set_contrast(int contrast); /* contrast is a percentage, 0 to 100 */ /*==========================================================================*/ diff --git a/src/gfx/vid_1200.c b/src/gfx/vid_1200.c index abc1b54..3e6c023 100644 --- a/src/gfx/vid_1200.c +++ b/src/gfx/vid_1200.c @@ -1044,7 +1044,7 @@ gfx_set_video_palette_entry(unsigned long index, unsigned long palette) /*--------------------------------------------------------------------------- * gfx_set_video_palette_bypass * - * This routine enables/disables the pallete RAM bypass. + * This routine enables/disables the palette RAM bypass. *--------------------------------------------------------------------------- */ #if GFX_VIDEO_DYNAMIC @@ -2045,7 +2045,7 @@ gfx_get_video_src_size(void) if (width) { /* DETERMINE HEIGHT BY DIVIDING TOTAL SIZE BY WIDTH */ - /* Get total size from display controller - abtracted. */ + /* Get total size from display controller - abstracted. */ height = gfx_get_display_video_size() / (width << 1); } diff --git a/src/gfx/vid_5530.c b/src/gfx/vid_5530.c index f524300..8442dfb 100644 --- a/src/gfx/vid_5530.c +++ b/src/gfx/vid_5530.c @@ -1086,7 +1086,7 @@ gfx_get_video_src_size(void) if (width) { /* DETERMINE HEIGHT BY DIVIDING TOTAL SIZE BY WIDTH */ - /* Get total size from display controller - abtracted. */ + /* Get total size from display controller - abstracted. */ height = gfx_get_display_video_size() / (width << 1); } diff --git a/src/gfx/vid_rdcl.c b/src/gfx/vid_rdcl.c index 3ccc57a..72f45d4 100644 --- a/src/gfx/vid_rdcl.c +++ b/src/gfx/vid_rdcl.c @@ -1251,7 +1251,7 @@ gfx_set_video_palette_entry(unsigned long index, unsigned long palette) /*--------------------------------------------------------------------------- * gfx_set_video_palette_bypass * - * This routine enables/disables the pallete RAM bypass. + * This routine enables/disables the palette RAM bypass. *--------------------------------------------------------------------------- */ #if GFX_VIDEO_DYNAMIC diff --git a/src/gx_accel.c b/src/gx_accel.c index 41fb7ec..1bc9a4c 100644 --- a/src/gx_accel.c +++ b/src/gx_accel.c @@ -1158,7 +1158,7 @@ GXSubsequentSolidBresenhamLine(ScrnInfoPtr pScrni, int x1, int y1, * y0 int destination y start offset * x1 int destination x end offset * y1 int destination y end offset - * flags int OMIT_LAST, dont draw last pixel (not used) + * flags int OMIT_LAST, don't draw last pixel (not used) * * Returns :none *---------------------------------------------------------------------------*/ @@ -1319,9 +1319,9 @@ GXSetupForDashedLine(ScrnInfoPtr pScrn, int fg, int bg, int rop, * Parameters: * pScrni: Screen handler pointer having screen information. * x1: Specifies the starting x position - * y1: Specifies starting y possition - * absmaj: Specfies the Bresenman absolute major. - * absmin: Specfies the Bresenman absolute minor. + * y1: Specifies starting y position + * absmaj: Specifies the Bresenman absolute major. + * absmin: Specifies the Bresenman absolute minor. * err: Specifies the bresenham err term. * len: Specifies the length of the vector interms of pixels. * octant: not used in this function,may be added for standard @@ -1376,7 +1376,7 @@ GXSubsequentDashedBresenhamLine(ScrnInfoPtr pScrni, * y0 int destination y start offset * x1 int destination x end offset * y1 int destination y end offset - * flags int OMIT_LAST, dont draw last pixel (not used) + * flags int OMIT_LAST, don't draw last pixel (not used) * phase int initial pattern offset at x1,y1 * * Returns :none diff --git a/src/gx_cursor.c b/src/gx_cursor.c index 5a8f335..54a1bf1 100644 --- a/src/gx_cursor.c +++ b/src/gx_cursor.c @@ -74,15 +74,15 @@ GXHWCursorInit(ScreenPtr pScrn) infoPtr = xf86CreateCursorInfoRec(); if (!infoPtr) return FALSE; - /* the geode structure is intiallized with the cursor infoRec */ + /* the geode structure is initialized with the cursor infoRec */ pGeode->CursorInfo = infoPtr; infoPtr->MaxWidth = 32; infoPtr->MaxHeight = 32; - /* seeting up the cursor flags */ + /* setting up the cursor flags */ infoPtr->Flags = HARDWARE_CURSOR_BIT_ORDER_MSBFIRST | HARDWARE_CURSOR_TRUECOLOR_AT_8BPP | HARDWARE_CURSOR_SOURCE_MASK_NOT_INTERLEAVED; - /* cursor info ptr is intiallized with the values obtained from + /* cursor info ptr is initialized with the values obtained from * * durnago calls */ infoPtr->SetCursorColors = GXSetCursorColors; @@ -125,7 +125,7 @@ GXSetCursorColors(ScrnInfoPtr pScrni, int bg, int fg) * Parameters: * pScrn: Screeen pointer structure. * x: Specifies the x-cordinates of the cursor. - * y: Specifies the y co-ordinate of the cursor. + * y: Specifies the y coordinate of the cursor. * * Returns: none. * diff --git a/src/gx_driver.c b/src/gx_driver.c index 188828c..0471389 100644 --- a/src/gx_driver.c +++ b/src/gx_driver.c @@ -269,7 +269,7 @@ GXAllocateMemory(ScreenPtr pScrn, ScrnInfoPtr pScrni, int rotate) RegionRec OffscreenRegion; BoxRec AvailBox; - /* Assume the shadow FB exists even if it doesnt */ + /* Assume the shadow FB exists even if it doesn't */ if (pGeode->shadowSize == 0) { size = (pScrn->width * bytpp) * pScrni->virtualX; @@ -564,7 +564,7 @@ GXPreInit(ScrnInfoPtr pScrni, int flags) (int *) &(pGeode->FBAvail))) pGeode->FBAvail = 0; - /* For compatability - allow SWCursor too */ + /* For compatibility - allow SWCursor too */ if (xf86ReturnOptValBool(GeodeOptions, GX_OPTION_SW_CURSOR, FALSE)) pGeode->tryHWCursor = FALSE; @@ -620,7 +620,7 @@ GXPreInit(ScrnInfoPtr pScrni, int flags) pGeode->useEXA = FALSE; else if (xf86NameCmp(s, "EXA")) xf86DrvMsg(pScrni->scrnIndex, X_ERROR, - "Unknown accleration method %s. Defaulting to XAA.\n", + "Unknown acceleration method %s. Defaulting to XAA.\n", s); #elif defined(XF86EXA) pGeode->useEXA = TRUE; @@ -1135,7 +1135,7 @@ GXEnterGraphics(ScreenPtr pScrn, ScrnInfoPtr pScrni) } /* Set up the memory */ - /* XXX - FIXME - when we alow inital rotation, it should be here */ + /* XXX - FIXME - when we allow initial rotation, it should be here */ GXAllocateMemory(pScrn, pScrni, pGeode->rotation); /* Clear the framebuffer */ @@ -1635,7 +1635,7 @@ GeodeCalculatePitchBytes(unsigned int width, unsigned int bpp) if (width < 640) delta <<= 1; - /* Calculate the pitch (compression rquires a power of 2) */ + /* Calculate the pitch (compression requires a power of 2) */ if (delta > 4096) delta = 8192; diff --git a/src/gx_vga.c b/src/gx_vga.c index 48d08d5..9482a3f 100644 --- a/src/gx_vga.c +++ b/src/gx_vga.c @@ -174,7 +174,7 @@ gu2_gfx_to_vga(int vga_mode) /*restart the sequencer */ gfx_outw(0x3C4, 0x300); - /* turn on the attribute controler */ + /* turn on the attribute controller */ tmp = gfx_inb(0x3DA); gfx_outb(0x3C0, 0x20); tmp = gfx_inb(0x3DA); diff --git a/src/gx_video.c b/src/gx_video.c index 7964d17..cc69dc2 100644 --- a/src/gx_video.c +++ b/src/gx_video.c @@ -271,7 +271,7 @@ typedef struct { /*---------------------------------------------------------------------------- * GXSetColorKey * - * Description :This function reads the color key for the pallete and + * Description :This function reads the color key for the palette and * sets the video color key register. * * Parameters. @@ -514,7 +514,7 @@ GXStopVideo(ScrnInfoPtr pScrni, pointer data, Bool exit) * attribute :The port attribute to be set * value :Value of the attribute to be set. * - * Returns :Sucess if the attribute is supported, else BadMatch + * Returns :Success if the attribute is supported, else BadMatch * * Comments :none *---------------------------------------------------------------------------- @@ -564,7 +564,7 @@ GXSetPortAttribute(ScrnInfoPtr pScrni, * attribute :The port attribute to be read * value :Pointer to the value of the attribute to be read. * - * Returns :Sucess if the attribute is supported, else BadMatch + * Returns :Success if the attribute is supported, else BadMatch * * Comments :none *---------------------------------------------------------------------------- diff --git a/src/lx_display.c b/src/lx_display.c index 6315f9f..2aeb3b4 100644 --- a/src/lx_display.c +++ b/src/lx_display.c @@ -297,7 +297,7 @@ lx_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode, else vg_set_display_offset(0); - /* FIXME: Whats up with X and Y? Does that come into play + /* FIXME: What's up with X and Y? Does that come into play * here? */ df_configure_video_source(&vs_odd, &vs_even); diff --git a/src/lx_driver.c b/src/lx_driver.c index 9cb8889..0f04579 100644 --- a/src/lx_driver.c +++ b/src/lx_driver.c @@ -425,7 +425,7 @@ LXPreInit(ScrnInfoPtr pScrni, int flags) (int *) &(pGeode->FBAvail))) pGeode->FBAvail = 0; - /* For compatability - allow SWCursor too */ + /* For compatibility - allow SWCursor too */ if (xf86ReturnOptValBool(GeodeOptions, LX_OPTION_SW_CURSOR, FALSE)) pGeode->tryHWCursor = FALSE; diff --git a/src/lx_exa.c b/src/lx_exa.c index 60edd1b..fb26bee 100644 --- a/src/lx_exa.c +++ b/src/lx_exa.c @@ -1136,7 +1136,7 @@ lx_do_composite_mask_two_pass(PixmapPtr pxDst, unsigned long dstOffset, /* The rendering region should not be bigger than off-screen memory size * which equals to DEFAULT_EXA_SCRATCH_BFRSZ. If that happens, we split * the PictOpOver rendering region into several 256KB chunks. And because - * of the Pitch(stride) parameter, so we use maximun width of mask picture. + * of the Pitch(stride) parameter, so we use maximum width of mask picture. * that is to say it is a scanline rendering process */ if (width * height * 4 > DEFAULT_EXA_SCRATCH_BFRSZ) { opWidth = width; diff --git a/src/lx_memory.c b/src/lx_memory.c index 992446f..9e14926 100644 --- a/src/lx_memory.c +++ b/src/lx_memory.c @@ -261,7 +261,7 @@ LXInitOffscreen(ScrnInfoPtr pScrni) if (ptr == NULL) { /* If we couldn't allocate what we wanted, - * then allocate whats left */ + * then allocate what's left */ ptr = GeodeAllocRemainder(pGeode); } diff --git a/src/panel/pnl_bios.c b/src/panel/pnl_bios.c index 56b13b9..73f1e5c 100644 --- a/src/panel/pnl_bios.c +++ b/src/panel/pnl_bios.c @@ -25,7 +25,7 @@ /* * File Contents: This file panel functions which query for the BIOS for - * current FP Paramters. + * current FP Parameters. * * SubModule: Geode FlatPanel library * */ diff --git a/src/panel/pnl_init.c b/src/panel/pnl_init.c index 3c58014..ae28ecb 100644 --- a/src/panel/pnl_init.c +++ b/src/panel/pnl_init.c @@ -25,7 +25,7 @@ /* * File Contents: This file contains the Geode frame buffer panel - * intialization functions. + * initialization functions. * * SubModule: Geode FlatPanel library * */ diff --git a/src/panel/readme.txt b/src/panel/readme.txt index c8ca986..3dc2ecf 100644 --- a/src/panel/readme.txt +++ b/src/panel/readme.txt @@ -22,7 +22,7 @@ subdirectory needs to be copied in the driver directory. ----------------------------------------------------------------------------- INSTALLATION INSTRUCTIONS ----------------------------------------------------------------------------- -These is no instalation and to be treaded as a driver source code extension. +There is no installation and to be treated as a driver source code extension. ----------------------------------------------------------------------------- UNIT TEST Panel library when compiled is a part of the driver and cannot be unit tested. @@ -153,7 +153,7 @@ Dependencies: ----------------------------------------------------------------------------- FUNCTIONAL CHANGES ----------------------------------------------------------------------------- -- Added function protoype. +- Added function prototype. ----------------------------------------------------------------------------- DEFECTS CORRECTED ----------------------------------------------------------------------------- @@ -224,7 +224,7 @@ Dependencies: ----------------------------------------------------------------------------- FUNCTIONAL CHANGES ----------------------------------------------------------------------------- -Added the protoype for gfx_detect_video. +Added the prototype for gfx_detect_video. Durango dependency removed. ----------------------------------------------------------------------------- DEFECTS CORRECTED @@ -305,7 +305,7 @@ z4l_open_device(Z4lPortPrivRec * pPriv) enable = 1; #ifdef NONBLK_IO if (IoCtl(pPriv->fd, FIONBIO, &enable, 1) != 0) { - DBLOG(1, "open cant enable nonblocking\n"); + DBLOG(1, "open can't enable nonblocking\n"); close(pPriv->fd); pPriv->fd = -1; } @@ -1363,7 +1363,7 @@ Z4lInit(ScrnInfoPtr pScrni, XF86VideoAdaptorPtr ** adaptors) msg = "no streaming"; #ifdef NONBLK_IO else if (IoCtl(fd, FIONBIO, &enable, 1) != 0) - msg = "cant enable non-blocking io"; + msg = "can't enable non-blocking io"; #endif if (msg == NULL) { memset(&format, 0, sizeof(format)); |