/* * Copyright (c) 2006 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Neither the name of the Advanced Micro Devices, Inc. nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. */ /* * Cimarron MSR access routines. These routines allow the user to query the * state of the GeodeLink Bus and read and write model-specfic registers. */ /*--------------------------------------------------------------*/ /* MSR GLOBALS */ /* These variables hold a local copy of the GeodeLink mapping */ /* as well as a lookup table for easy device addressing. */ /*--------------------------------------------------------------*/ GEODELINK_NODE gliu_nodes[24]; GEODELINK_NODE msr_dev_lookup[MSR_DEVICE_EMPTY]; #define GET_DEVICE_ID(macrohigh, macrolow) ((macrolow >> 12) & 0xFF) /*--------------------------------------------------------------------------- * msr_init_table * * This routine intializes the internal MSR table in Cimarron. This table is * used for any MSR device accesses. *--------------------------------------------------------------------------*/ int msr_init_table(void) { Q_WORD msr_value = {0, 0}; unsigned int i, j; int return_value = CIM_STATUS_OK; /* CHECK FOR VALID GEODELINK CONFIGURATION * The CPU and the three GLIUs are assumed to be at known static * addresses, so we will check the device IDs at these addresses as proof * of a valid GeodeLink configuration */ MSR_READ(MSR_GEODELINK_CAP, MSR_ADDRESS_VAIL, &msr_value); if (GET_DEVICE_ID(msr_value.high, msr_value.low) != MSR_CLASS_CODE_VAIL) return_value = CIM_STATUS_ERROR; MSR_READ(MSR_GEODELINK_CAP, MSR_ADDRESS_GLIU0, &msr_value); if (GET_DEVICE_ID(msr_value.high, msr_value.low) != MSR_CLASS_CODE_GLIU) return_value = CIM_STATUS_ERROR; MSR_READ(MSR_GEODELINK_CAP, MSR_ADDRESS_GLIU1, &msr_value); if (GET_DEVICE_ID(msr_value.high, msr_value.low) != MSR_CLASS_CODE_GLIU) return_value = CIM_STATUS_ERROR; MSR_READ(MSR_GEODELINK_CAP, MSR_ADDRESS_GLIU2, &msr_value); if (GET_DEVICE_ID(msr_value.high, msr_value.low) != MSR_CLASS_CODE_GLIU) return_value = CIM_STATUS_ERROR; if (return_value == CIM_STATUS_OK) { /* BUILD LOCAL COPY OF THE GEODELINK BUS */ msr_create_geodelink_table(gliu_nodes); /* CLEAR TABLE STATUS */ for (i = 0; i < MSR_DEVICE_EMPTY; i++) msr_dev_lookup[i].device_id = MSR_DEVICE_NOTFOUND; /* CREATE EASY LOOKUP TABLE FOR FUTURE HARDWARE ACCESS */ /* Note that MSR_DEVICE_EMPTY is the index after the last */ /* available device. Also note that we fill in known */ /* devices before filling in the rest of the table. */ msr_dev_lookup[MSR_DEVICE_GEODELX_GLIU0].address_from_cpu = MSR_ADDRESS_GLIU0; msr_dev_lookup[MSR_DEVICE_GEODELX_GLIU0].device_id = MSR_DEVICE_PRESENT; msr_dev_lookup[MSR_DEVICE_GEODELX_GLIU1].address_from_cpu = MSR_ADDRESS_GLIU1; msr_dev_lookup[MSR_DEVICE_GEODELX_GLIU1].device_id = MSR_DEVICE_PRESENT; msr_dev_lookup[MSR_DEVICE_5535_GLIU].address_from_cpu = MSR_ADDRESS_GLIU2; msr_dev_lookup[MSR_DEVICE_5535_GLIU].device_id = MSR_DEVICE_PRESENT; msr_dev_lookup[MSR_DEVICE_GEODELX_VAIL].address_from_cpu = MSR_ADDRESS_VAIL; msr_dev_lookup[MSR_DEVICE_GEODELX_VAIL].device_id = MSR_DEVICE_PRESENT; for (i = 0; i < MSR_DEVICE_EMPTY; i++) { if (msr_dev_lookup[i].device_id == MSR_DEVICE_NOTFOUND) { for (j = 0; j < 24; j++) { if (gliu_nodes[j].device_id == i) break; } if (j == 24) msr_dev_lookup[i].device_id = MSR_DEVICE_NOTFOUND; else { msr_dev_lookup[i].device_id = MSR_DEVICE_PRESENT; msr_dev_lookup[i].address_from_cpu = gliu_nodes[j].address_from_cpu; } } } } else { /* ERROR OUT THE GEODELINK TABLES */ for (i = 0; i < 24; i++) { gliu_nodes[i].address_from_cpu = 0xFFFFFFFF; gliu_nodes[i].device_id = MSR_DEVICE_EMPTY; } for (i = 0; i < MSR_DEVICE_EMPTY; i++) { msr_dev_lookup[i].address_from_cpu = 0xFFFFFFFF; msr_dev_lookup[i].device_id = MSR_DEVICE_NOTFOUND; } } return return_value; } /*--------------------------------------------------------------------------- * msr_create_geodelink_table * * This routine dumps the contents of the GeodeLink bus into an array of * 24 GEODELINK_NODE structures. Indexes 0-7 represent ports 0-7 of GLIU0, * indexes 8-15 represent ports 0-7 of GLIU1 and indexes 16-23 represent * ports 0-7 of GLIU2 (5535). *--------------------------------------------------------------------------*/ int msr_create_geodelink_table(GEODELINK_NODE * gliu_nodes) { unsigned long mbiu_port_count, reflective; unsigned long port, index; unsigned long gliu_count = 0; int glcp_count = 0; int usb_count = 0; int mpci_count = 0; Q_WORD msr_value = {0, 0}; /* ALL THREE GLIUS ARE IN ONE ARRAY */ /* Entries 0-7 contain the port information for GLIU0, entries */ /* 8-15 contain GLIU1 and 15-23 contain GLIU2. We perform the */ /* enumeration in two passes. The first simply fills in the */ /* addresses and class codes at each node. The second pass */ /* translates the class codes into indexes into Cimarron's device */ /* lookup table. */ /* COUNT GLIU0 PORTS */ MSR_READ(MSR_GLIU_CAP, MSR_ADDRESS_GLIU0, &msr_value); mbiu_port_count = (msr_value.high >> NUM_PORTS_SHIFT) & 7; /* FIND REFLECTIVE PORT */ /* Query the GLIU for the port through which we are communicating. */ /* We will avoid accesses to this port to avoid a self-reference. */ MSR_READ(MSR_GLIU_WHOAMI, MSR_ADDRESS_GLIU0, &msr_value); reflective = msr_value.low & WHOAMI_MASK; /* SPECIAL CASE FOR PORT 0 */ /* GLIU0 port 0 is a special case, as it points back to GLIU0. GLIU0 */ /* responds at address 0x10000xxx, which does not equal 0 << 29. */ gliu_nodes[0].address_from_cpu = MSR_ADDRESS_GLIU0; gliu_nodes[0].device_id = MSR_CLASS_CODE_GLIU; /* ENUMERATE ALL PORTS */ for (port = 1; port < 8; port++) { /* FILL IN ADDRESS */ gliu_nodes[port].address_from_cpu = port << 29; if (port == reflective) gliu_nodes[port].device_id = MSR_CLASS_CODE_REFLECTIVE; else if (port > mbiu_port_count) gliu_nodes[port].device_id = MSR_CLASS_CODE_UNPOPULATED; else { MSR_READ(MSR_GEODELINK_CAP, gliu_nodes[port].address_from_cpu, &msr_value); gliu_nodes[port].device_id = GET_DEVICE_ID(msr_value.high, msr_value.low); } } /* COUNT GLIU1 PORTS */ MSR_READ(MSR_GLIU_CAP, MSR_ADDRESS_GLIU1, &msr_value); mbiu_port_count = (msr_value.high >> NUM_PORTS_SHIFT) & 7; /* FIND REFLECTIVE PORT */ MSR_READ(MSR_GLIU_WHOAMI, MSR_ADDRESS_GLIU1, &msr_value); reflective = msr_value.low & WHOAMI_MASK; /* ENUMERATE ALL PORTS */ for (port = 0; port < 8; port++) { index = port + 8; /* FILL IN ADDRESS */ gliu_nodes[index].address_from_cpu = (0x02l << 29) + (port << 26); if (port == reflective) gliu_nodes[index].device_id = MSR_CLASS_CODE_REFLECTIVE; else if (port > mbiu_port_count) gliu_nodes[index].device_id = MSR_CLASS_CODE_UNPOPULATED; else { MSR_READ(MSR_GEODELINK_CAP, gliu_nodes[index].address_from_cpu, &msr_value); gliu_nodes[index].device_id = GET_DEVICE_ID(msr_value.high, msr_value.low); } } /* COUNT GLIU2 PORTS */ MSR_READ(MSR_GLIU_CAP, MSR_ADDRESS_GLIU2, &msr_value); mbiu_port_count = (msr_value.high >> NUM_PORTS_SHIFT) & 7; /* FIND REFLECTIVE PORT */ MSR_READ(MSR_GLIU_WHOAMI, MSR_ADDRESS_GLIU2, &msr_value); reflective = msr_value.low & WHOAMI_MASK; /* FILL IN PORT 0 AND 1 */ /* Port 0 on 5535 is MBIU2. Port 1 is MPCI, but it is referenced at */ /* a special address. */ gliu_nodes[16].address_from_cpu = MSR_ADDRESS_GLIU2; gliu_nodes[16].device_id = MSR_CLASS_CODE_GLIU; gliu_nodes[17].address_from_cpu = MSR_ADDRESS_5535MPCI; gliu_nodes[17].device_id = MSR_CLASS_CODE_MPCI; /* ENUMERATE ALL PORTS */ for (port = 2; port < 8; port++) { index = port + 16; /* FILL IN ADDRESS */ gliu_nodes[index].address_from_cpu = (0x02l << 29) + (0x04l << 26) + (0x02l << 23) + (port << 20); if (port == reflective) gliu_nodes[index].device_id = MSR_CLASS_CODE_REFLECTIVE; else if (port > mbiu_port_count) gliu_nodes[index].device_id = MSR_CLASS_CODE_UNPOPULATED; else { MSR_READ(MSR_GEODELINK_CAP, gliu_nodes[index].address_from_cpu, &msr_value); gliu_nodes[index].device_id = GET_DEVICE_ID(msr_value.high, msr_value.low); } } /* SECOND PASS - TRANSLATION */ /* Now that the class codes for each device are stored in the */ /* array, we walk through the array and translate the class */ /* codes to table indexes. For class codes that have multiple */ /* instances, the table indexes are sequential. */ for (port = 0; port < 24; port++) { /* SPECIAL CASE FOR GLIU UNITS */ /* A GLIU can be both on another port and on its own port. These */ /* end up as the same address, but are shown as duplicate nodes in */ /* the GeodeLink table. */ if ((port & 7) == 0) gliu_count = port >> 3; switch (gliu_nodes[port].device_id) { /* UNPOPULATED OR REFLECTIVE NODES */ case MSR_CLASS_CODE_UNPOPULATED: index = MSR_DEVICE_EMPTY; break; case MSR_CLASS_CODE_REFLECTIVE: index = MSR_DEVICE_REFLECTIVE; break; /* KNOWN CLASS CODES */ case MSR_CLASS_CODE_GLIU: index = MSR_DEVICE_GEODELX_GLIU0 + gliu_count++; break; case MSR_CLASS_CODE_GLCP: index = MSR_DEVICE_GEODELX_GLCP + glcp_count++; break; case MSR_CLASS_CODE_MPCI: index = MSR_DEVICE_GEODELX_MPCI + mpci_count++; break; case MSR_CLASS_CODE_USB: index = MSR_DEVICE_5535_USB2 + usb_count++; break; case MSR_CLASS_CODE_USB2: index = MSR_DEVICE_5536_USB_2_0; break; case MSR_CLASS_CODE_ATAC: index = MSR_DEVICE_5535_ATAC; break; case MSR_CLASS_CODE_MDD: index = MSR_DEVICE_5535_MDD; break; case MSR_CLASS_CODE_ACC: index = MSR_DEVICE_5535_ACC; break; case MSR_CLASS_CODE_MC: index = MSR_DEVICE_GEODELX_MC; break; case MSR_CLASS_CODE_GP: index = MSR_DEVICE_GEODELX_GP; break; case MSR_CLASS_CODE_VG: index = MSR_DEVICE_GEODELX_VG; break; case MSR_CLASS_CODE_DF: index = MSR_DEVICE_GEODELX_DF; break; case MSR_CLASS_CODE_FG: index = MSR_DEVICE_GEODELX_FG; break; case MSR_CLASS_CODE_VIP: index = MSR_DEVICE_GEODELX_VIP; break; case MSR_CLASS_CODE_AES: index = MSR_DEVICE_GEODELX_AES; break; case MSR_CLASS_CODE_VAIL: index = MSR_DEVICE_GEODELX_VAIL; break; default: index = MSR_DEVICE_EMPTY; break; } gliu_nodes[port].device_id = index; } return CIM_STATUS_OK; } /*--------------------------------------------------------------------------- * msr_create_device_list * * This routine dumps a list of all known GeodeLX/5535 devices as well as their * respective status and address. *--------------------------------------------------------------------------*/ int msr_create_device_list(GEODELINK_NODE * gliu_nodes, int max_devices) { int i, count; if (max_devices < MSR_DEVICE_EMPTY) count = max_devices; else count = MSR_DEVICE_EMPTY; for (i = 0; i < count; i++) { gliu_nodes[i].address_from_cpu = msr_dev_lookup[i].address_from_cpu; gliu_nodes[i].device_id = msr_dev_lookup[i].device_id; } return CIM_STATUS_OK; } /*-------------------------------------------------------------------- * msr_read64 * * Performs a 64-bit read from 'msr_register' in device 'device'. 'device' is * an index into Cimarron's table of known GeodeLink devices. *-------------------------------------------------------------------*/ int msr_read64(unsigned long device, unsigned long msr_register, Q_WORD * msr_value) { if (device < MSR_DEVICE_EMPTY) { if (msr_dev_lookup[device].device_id == MSR_DEVICE_PRESENT) { MSR_READ(msr_register, msr_dev_lookup[device].address_from_cpu, msr_value); return CIM_STATUS_OK; } } msr_value->low = msr_value->high = 0; return CIM_STATUS_DEVNOTFOUND; } /*-------------------------------------------------------------------- * msr_write64 * * Performs a 64-bit write to 'msr_register' in device 'device'. 'device' is * an index into Cimarron's table of known GeodeLink devices. *-------------------------------------------------------------------*/ int msr_write64(unsigned long device, unsigned long msr_register, Q_WORD * msr_value) { if (device < MSR_DEVICE_EMPTY) { if (msr_dev_lookup[device].device_id == MSR_DEVICE_PRESENT) { MSR_WRITE(msr_register, msr_dev_lookup[device].address_from_cpu, msr_value); return CIM_STATUS_OK; } } return CIM_STATUS_DEVNOTFOUND; }