Initial revisionXORG-STABLE

1 files changed, 288 insertions, 0 deletions

diff --git a/src/i830_common.h b/src/i830_common.h
new file mode 100644
index 00000000..3367bfc1
--- /dev/null
+++ b/src/i830_common.h
@@ -0,0 +1,288 @@
+/**************************************************************************
+
+Copyright 2001 VA Linux Systems Inc., Fremont, California.
+Copyright 2002 Tungsten Graphics Inc., Cedar Park, Texas.
+
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+on the rights to use, copy, modify, merge, publish, distribute, sub
+license, and/or sell copies of the Software, and to permit persons to whom
+the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice (including the next
+paragraph) shall be included in all copies or substantial portions of the
+Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ATI, VA LINUX SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM,
+DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+**************************************************************************/
+
+/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i830_common.h,v 1.2 2002/12/10 01:27:05 dawes Exp $ */
+
+/* Author: Jeff Hartmann <jhartmann@valinux.com> 
+
+   Converted to common header format:
+     Jens Owen <jens@tungstengraphics.com>
+ */
+
+#ifndef _I830_COMMON_H_
+#define _I830_COMMON_H_
+
+/* WARNING: These defines must be the same as what the Xserver uses.
+ * if you change them, you must change the defines in the Xserver.
+ */
+
+#ifndef _I830_DEFINES_
+#define _I830_DEFINES_
+
+#define I830_DMA_BUF_ORDER		12
+#define I830_DMA_BUF_SZ 		(1<<I830_DMA_BUF_ORDER)
+#define I830_DMA_BUF_NR 		256
+#define I830_NR_SAREA_CLIPRECTS 	8
+
+/* Each region is a minimum of 64k, and there are at most 64 of them.
+ */
+#define I830_NR_TEX_REGIONS 64
+#define I830_LOG_MIN_TEX_REGION_SIZE 16
+
+/* if defining I830_ENABLE_4_TEXTURES, do it in i830_3d_reg.h, too */
+#if !defined(I830_ENABLE_4_TEXTURES)
+#define I830_TEXTURE_COUNT	2
+#define I830_TEXBLEND_COUNT	2	/* always same as TEXTURE_COUNT? */
+#else /* defined(I830_ENABLE_4_TEXTURES) */
+#define I830_TEXTURE_COUNT	4
+#define I830_TEXBLEND_COUNT	4	/* always same as TEXTURE_COUNT? */
+#endif /* I830_ENABLE_4_TEXTURES */
+
+#define I830_TEXBLEND_SIZE	12	/* (4 args + op) * 2 + COLOR_FACTOR */
+
+#define I830_UPLOAD_CTX			0x1
+#define I830_UPLOAD_BUFFERS		0x2
+#define I830_UPLOAD_CLIPRECTS		0x4
+#define I830_UPLOAD_TEX0_IMAGE		0x100	/* handled clientside */
+#define I830_UPLOAD_TEX0_CUBE		0x200	/* handled clientside */
+#define I830_UPLOAD_TEX1_IMAGE		0x400	/* handled clientside */
+#define I830_UPLOAD_TEX1_CUBE		0x800	/* handled clientside */
+#define I830_UPLOAD_TEX2_IMAGE		0x1000	/* handled clientside */
+#define I830_UPLOAD_TEX2_CUBE		0x2000	/* handled clientside */
+#define I830_UPLOAD_TEX3_IMAGE		0x4000	/* handled clientside */
+#define I830_UPLOAD_TEX3_CUBE		0x8000	/* handled clientside */
+#define I830_UPLOAD_TEX_N_IMAGE(n)	(0x100 << (n * 2))
+#define I830_UPLOAD_TEX_N_CUBE(n)	(0x200 << (n * 2))
+#define I830_UPLOAD_TEXIMAGE_MASK	0xff00
+#define I830_UPLOAD_TEX0			0x10000
+#define I830_UPLOAD_TEX1			0x20000
+#define I830_UPLOAD_TEX2			0x40000
+#define I830_UPLOAD_TEX3			0x80000
+#define I830_UPLOAD_TEX_N(n)		(0x10000 << (n))
+#define I830_UPLOAD_TEX_MASK		0xf0000
+#define I830_UPLOAD_TEXBLEND0		0x100000
+#define I830_UPLOAD_TEXBLEND1		0x200000
+#define I830_UPLOAD_TEXBLEND2		0x400000
+#define I830_UPLOAD_TEXBLEND3		0x800000
+#define I830_UPLOAD_TEXBLEND_N(n)	(0x100000 << (n))
+#define I830_UPLOAD_TEXBLEND_MASK	0xf00000
+#define I830_UPLOAD_TEX_PALETTE_N(n)    (0x1000000 << (n))
+#define I830_UPLOAD_TEX_PALETTE_SHARED	0x4000000
+#define I830_UPLOAD_STIPPLE         	0x8000000
+
+/* Indices into buf.Setup where various bits of state are mirrored per
+ * context and per buffer.  These can be fired at the card as a unit,
+ * or in a piecewise fashion as required.
+ */
+
+/* Destbuffer state 
+ *    - backbuffer linear offset and pitch -- invarient in the current dri
+ *    - zbuffer linear offset and pitch -- also invarient
+ *    - drawing origin in back and depth buffers.
+ *
+ * Keep the depth/back buffer state here to acommodate private buffers
+ * in the future.
+ */
+
+#define I830_DESTREG_CBUFADDR 0
+/* Invarient */
+#define I830_DESTREG_DBUFADDR 1
+#define I830_DESTREG_DV0 2
+#define I830_DESTREG_DV1 3
+#define I830_DESTREG_SENABLE 4
+#define I830_DESTREG_SR0 5
+#define I830_DESTREG_SR1 6
+#define I830_DESTREG_SR2 7
+#define I830_DESTREG_DR0 8
+#define I830_DESTREG_DR1 9
+#define I830_DESTREG_DR2 10
+#define I830_DESTREG_DR3 11
+#define I830_DESTREG_DR4 12
+#define I830_DEST_SETUP_SIZE 13
+
+/* Context state
+ */
+#define I830_CTXREG_STATE1		0
+#define I830_CTXREG_STATE2		1
+#define I830_CTXREG_STATE3		2
+#define I830_CTXREG_STATE4		3
+#define I830_CTXREG_STATE5		4
+#define I830_CTXREG_IALPHAB		5
+#define I830_CTXREG_STENCILTST		6
+#define I830_CTXREG_ENABLES_1		7
+#define I830_CTXREG_ENABLES_2		8
+#define I830_CTXREG_AA			9
+#define I830_CTXREG_FOGCOLOR		10
+#define I830_CTXREG_BLENDCOLR0		11
+#define I830_CTXREG_BLENDCOLR		12	/* Dword 1 of 2 dword command */
+#define I830_CTXREG_VF			13
+#define I830_CTXREG_VF2			14
+#define I830_CTXREG_MCSB0		15
+#define I830_CTXREG_MCSB1		16
+#define I830_CTX_SETUP_SIZE		17
+
+/* 1.3: Stipple state
+ */ 
+#define I830_STPREG_ST0 0
+#define I830_STPREG_ST1 1
+#define I830_STP_SETUP_SIZE 2
+
+/* Texture state (per tex unit)
+ */
+#define I830_TEXREG_MI0	0		/* GFX_OP_MAP_INFO (6 dwords) */
+#define I830_TEXREG_MI1	1
+#define I830_TEXREG_MI2	2
+#define I830_TEXREG_MI3	3
+#define I830_TEXREG_MI4	4
+#define I830_TEXREG_MI5	5
+#define I830_TEXREG_MF	6		/* GFX_OP_MAP_FILTER */
+#define I830_TEXREG_MLC	7		/* GFX_OP_MAP_LOD_CTL */
+#define I830_TEXREG_MLL	8		/* GFX_OP_MAP_LOD_LIMITS */
+#define I830_TEXREG_MCS	9		/* GFX_OP_MAP_COORD_SETS */
+#define I830_TEX_SETUP_SIZE 10
+
+/* New version.  Kernel auto-detects.
+ */
+#define I830_TEXREG_TM0LI 	0 /* load immediate 2 texture map n */
+#define I830_TEXREG_TM0S0	1
+#define I830_TEXREG_TM0S1	2
+#define I830_TEXREG_TM0S2	3
+#define I830_TEXREG_TM0S3	4
+#define I830_TEXREG_TM0S4	5
+#define I830_TEXREG_NOP0	6	/* noop */
+#define I830_TEXREG_NOP1	7	/* noop */
+#define I830_TEXREG_NOP2	8	/* noop */
+#define __I830_TEXREG_MCS	9	/* GFX_OP_MAP_COORD_SETS -- shared */
+#define __I830_TEX_SETUP_SIZE   10
+
+
+#define I830_FRONT   0x1
+#define I830_BACK    0x2
+#define I830_DEPTH   0x4
+
+/* Driver specific DRM command indices
+ * NOTE: these are not OS specific, but they are driver specific
+ */
+#define DRM_I830_INIT                     0x00
+#define DRM_I830_VERTEX                   0x01
+#define DRM_I830_CLEAR                    0x02
+#define DRM_I830_FLUSH                    0x03
+#define DRM_I830_GETAGE                   0x04
+#define DRM_I830_GETBUF                   0x05
+#define DRM_I830_SWAP                     0x06
+#define DRM_I830_COPY                     0x07
+#define DRM_I830_DOCOPY                   0x08
+#define DRM_I830_FLIP                     0x09
+#define DRM_I830_IRQ_EMIT                 0x0a
+#define DRM_I830_IRQ_WAIT                 0x0b
+#define DRM_I830_GETPARAM                 0x0c
+#define DRM_I830_SETPARAM                 0x0d
+
+#endif /* _I830_DEFINES_ */
+
+typedef struct {
+   enum {
+      I830_INIT_DMA = 0x01,
+      I830_CLEANUP_DMA = 0x02
+   } func;
+   unsigned int mmio_offset;
+   unsigned int buffers_offset;
+   int sarea_priv_offset;
+   unsigned int ring_start;
+   unsigned int ring_end;
+   unsigned int ring_size;
+   unsigned int front_offset;
+   unsigned int back_offset;
+   unsigned int depth_offset;
+   unsigned int w;
+   unsigned int h;
+   unsigned int pitch;
+   unsigned int pitch_bits;
+   unsigned int back_pitch;
+   unsigned int depth_pitch;
+   unsigned int cpp;
+} drmI830Init;
+
+typedef struct {
+   int clear_color;
+   int clear_depth;
+   int flags;
+   unsigned int clear_colormask;
+   unsigned int clear_depthmask;
+} drmI830Clear;
+
+/* These may be placeholders if we have more cliprects than
+ * I830_NR_SAREA_CLIPRECTS.  In that case, the client sets discard to
+ * false, indicating that the buffer will be dispatched again with a
+ * new set of cliprects.
+ */
+typedef struct {
+   int idx;				/* buffer index */
+   int used;				/* nr bytes in use */
+   int discard;				/* client is finished with the buffer? */
+} drmI830Vertex;
+
+typedef struct {
+   int idx;				/* buffer index */
+   int used;				/* nr bytes in use */
+   void *address;			/* Address to copy from */
+} drmI830Copy;
+
+typedef struct {
+   void *virtual;
+   int request_idx;
+   int request_size;
+   int granted;
+} drmI830DMA;
+
+typedef struct drm_i830_irq_emit {
+	int *irq_seq;
+} drmI830IrqEmit;
+
+typedef struct drm_i830_irq_wait {
+	int irq_seq;
+} drmI830IrqWait;
+
+typedef struct drm_i830_getparam {
+	int param;
+	int *value;
+} drmI830GetParam;
+
+#define I830_PARAM_IRQ_ACTIVE  1
+
+
+typedef struct drm_i830_setparam {
+	int param;
+	int value;
+} drmI830SetParam;
+
+#define I830_SETPARAM_USE_MI_BATCHBUFFER_START  1
+
+
+
+#endif /* _I830_DRM_H_ */