Fix LVDS EDID to match all possible default modes

If the EDID data from the LVDS doesn't indicate support for a wide range of
continuous frequencies, it will not match any of the default modes although
our LVDS scaler logic ignores refresh rates when programming LVDS modes. Fix
this by smashing the compute EDID data to open up the sync rates.

Signed-off-by: Keith Packard <keithp@keithp.com>
(cherry picked from commit 3354e660b0744976871683ce226f17e873f26b50)

1 files changed, 30 insertions, 0 deletions

diff --git a/src/i830_lvds.c b/src/i830_lvds.c
index 1799eab1..3714142d 100644
--- a/src/i830_lvds.c
+++ b/src/i830_lvds.c
@@ -788,6 +788,36 @@ i830_lvds_get_modes(xf86OutputPtr output)
     DisplayModePtr	    modes;
 
     edid_mon = xf86OutputGetEDID (output, intel_output->pDDCBus);
+
+    /* Our LVDS scaler can hit any size, so mark the EDID data as
+     * supporting continuous timings
+     */
+    if (edid_mon) {
+	int i, j = -1;
+	edid_mon->features.msc |= 0x1;
+
+	/* Either find a DS_RANGES block, or replace a DS_VENDOR block,
+	 * smashing it into a DS_RANGES block with wide open refresh to
+	 * match all default modes
+	 */
+	for (i = 0; i < sizeof (edid_mon->det_mon) / sizeof (edid_mon->det_mon[0]); i++)
+	{
+	    if (edid_mon->det_mon[i].type >= DS_VENDOR && j == -1)
+		j = i;
+	    if (edid_mon->det_mon[i].type == DS_RANGES) {
+		j = i;
+		break;
+	    }
+	}
+	if (j != -1) {
+	    struct monitor_ranges   *ranges = &edid_mon->det_mon[j].section.ranges;
+	    edid_mon->det_mon[j].type = DS_RANGES;
+	    ranges->min_v = 0;
+	    ranges->max_v = 200;
+	    ranges->min_h = 0;
+	    ranges->max_h = 200;
+	}
+    }
     xf86OutputSetEDID (output, edid_mon);
     
     modes = xf86OutputGetEDIDModes (output);