diff options
Diffstat (limited to 'src/legacy/i810/i810_reg.h')
| -rw-r--r-- | src/legacy/i810/i810_reg.h | 3194 |
1 files changed, 3194 insertions, 0 deletions
diff --git a/src/legacy/i810/i810_reg.h b/src/legacy/i810/i810_reg.h new file mode 100644 index 00000000..2b679346 --- /dev/null +++ b/src/legacy/i810/i810_reg.h @@ -0,0 +1,3194 @@ +/************************************************************************** + +Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas. +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sub license, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice (including the +next paragraph) shall be included in all copies or substantial portions +of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. +IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR +ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +**************************************************************************/ + +/** @file + * Register names and fields for Intel graphics. + */ + +/* + * Authors: + * Keith Whitwell <keith@tungstengraphics.com> + * Eric Anholt <eric@anholt.net> + * + * based on the i740 driver by + * Kevin E. Martin <kevin@precisioninsight.com> + * + * + */ + +#ifndef _I810_REG_H +#define _I810_REG_H + +/* I/O register offsets + */ +#define SRX 0x3C4 /* p208 */ +#define GRX 0x3CE /* p213 */ +#define ARX 0x3C0 /* p224 */ + +/* VGA Color Palette Registers */ +#define DACMASK 0x3C6 /* p232 */ +#define DACSTATE 0x3C7 /* p232 */ +#define DACRX 0x3C7 /* p233 */ +#define DACWX 0x3C8 /* p233 */ +#define DACDATA 0x3C9 /* p233 */ + +/* CRT Controller Registers (CRX) */ +#define START_ADDR_HI 0x0C /* p246 */ +#define START_ADDR_LO 0x0D /* p247 */ +#define VERT_SYNC_END 0x11 /* p249 */ +#define EXT_VERT_TOTAL 0x30 /* p257 */ +#define EXT_VERT_DISPLAY 0x31 /* p258 */ +#define EXT_VERT_SYNC_START 0x32 /* p259 */ +#define EXT_VERT_BLANK_START 0x33 /* p260 */ +#define EXT_HORIZ_TOTAL 0x35 /* p261 */ +#define EXT_HORIZ_BLANK 0x39 /* p261 */ +#define EXT_START_ADDR 0x40 /* p262 */ +#define EXT_START_ADDR_ENABLE 0x80 +#define EXT_OFFSET 0x41 /* p263 */ +#define EXT_START_ADDR_HI 0x42 /* p263 */ +#define INTERLACE_CNTL 0x70 /* p264 */ +#define INTERLACE_ENABLE 0x80 +#define INTERLACE_DISABLE 0x00 + +/* Miscellaneous Output Register + */ +#define MSR_R 0x3CC /* p207 */ +#define MSR_W 0x3C2 /* p207 */ +#define IO_ADDR_SELECT 0x01 + +#define MDA_BASE 0x3B0 /* p207 */ +#define CGA_BASE 0x3D0 /* p207 */ + +/* CR80 - IO Control, p264 + */ +#define IO_CTNL 0x80 +#define EXTENDED_ATTR_CNTL 0x02 +#define EXTENDED_CRTC_CNTL 0x01 + +/* GR10 - Address mapping, p221 + */ +#define ADDRESS_MAPPING 0x10 +#define PAGE_TO_LOCAL_MEM_ENABLE 0x10 +#define GTT_MEM_MAP_ENABLE 0x08 +#define PACKED_MODE_ENABLE 0x04 +#define LINEAR_MODE_ENABLE 0x02 +#define PAGE_MAPPING_ENABLE 0x01 + +#define HOTKEY_VBIOS_SWITCH_BLOCK 0x80 +#define HOTKEY_SWITCH 0x20 +#define HOTKEY_TOGGLE 0x10 + +/* Blitter control, p378 + */ +#define BITBLT_CNTL 0x7000c +#define COLEXP_MODE 0x30 +#define COLEXP_8BPP 0x00 +#define COLEXP_16BPP 0x10 +#define COLEXP_24BPP 0x20 +#define COLEXP_RESERVED 0x30 +#define BITBLT_STATUS 0x01 + +#define CHDECMISC 0x10111 +#define DCC 0x10200 +#define C0DRB0 0x10200 +#define C0DRB1 0x10202 +#define C0DRB2 0x10204 +#define C0DRB3 0x10206 +#define C0DRA01 0x10208 +#define C0DRA23 0x1020a +#define C1DRB0 0x10600 +#define C1DRB1 0x10602 +#define C1DRB2 0x10604 +#define C1DRB3 0x10606 +#define C1DRA01 0x10608 +#define C1DRA23 0x1060a + +/* p375. + */ +#define DISPLAY_CNTL 0x70008 +#define VGA_WRAP_MODE 0x02 +#define VGA_WRAP_AT_256KB 0x00 +#define VGA_NO_WRAP 0x02 +#define GUI_MODE 0x01 +#define STANDARD_VGA_MODE 0x00 +#define HIRES_MODE 0x01 + +/* p375 + */ +#define PIXPIPE_CONFIG_0 0x70009 +#define DAC_8_BIT 0x80 +#define DAC_6_BIT 0x00 +#define HW_CURSOR_ENABLE 0x10 +#define EXTENDED_PALETTE 0x01 + +/* p375 + */ +#define PIXPIPE_CONFIG_1 0x7000a +#define DISPLAY_COLOR_MODE 0x0F +#define DISPLAY_VGA_MODE 0x00 +#define DISPLAY_8BPP_MODE 0x02 +#define DISPLAY_15BPP_MODE 0x04 +#define DISPLAY_16BPP_MODE 0x05 +#define DISPLAY_24BPP_MODE 0x06 +#define DISPLAY_32BPP_MODE 0x07 + +/* p375 + */ +#define PIXPIPE_CONFIG_2 0x7000b +#define DISPLAY_GAMMA_ENABLE 0x08 +#define DISPLAY_GAMMA_DISABLE 0x00 +#define OVERLAY_GAMMA_ENABLE 0x04 +#define OVERLAY_GAMMA_DISABLE 0x00 + + +/* p380 + */ +#define DISPLAY_BASE 0x70020 +#define DISPLAY_BASE_MASK 0x03fffffc + + +/* Cursor control registers, pp383-384 + */ +/* Desktop (845G, 865G) */ +#define CURSOR_CONTROL 0x70080 +#define CURSOR_ENABLE 0x80000000 +#define CURSOR_GAMMA_ENABLE 0x40000000 +#define CURSOR_STRIDE_MASK 0x30000000 +#define CURSOR_FORMAT_SHIFT 24 +#define CURSOR_FORMAT_MASK (0x07 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_2C (0x00 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_3C (0x01 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_4C (0x02 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_ARGB (0x04 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_XRGB (0x05 << CURSOR_FORMAT_SHIFT) + +/* Mobile and i810 */ +#define CURSOR_A_CONTROL CURSOR_CONTROL +#define CURSOR_ORIGIN_SCREEN 0x00 /* i810 only */ +#define CURSOR_ORIGIN_DISPLAY 0x1 /* i810 only */ +#define CURSOR_MODE 0x27 +#define CURSOR_MODE_DISABLE 0x00 +#define CURSOR_MODE_32_4C_AX 0x01 /* i810 only */ +#define CURSOR_MODE_64_3C 0x04 +#define CURSOR_MODE_64_4C_AX 0x05 +#define CURSOR_MODE_64_4C 0x06 +#define CURSOR_MODE_64_32B_AX 0x07 +#define CURSOR_MODE_64_ARGB_AX (0x20 | CURSOR_MODE_64_32B_AX) +#define MCURSOR_PIPE_SELECT (1 << 28) +#define MCURSOR_PIPE_A 0x00 +#define MCURSOR_PIPE_B (1 << 28) +#define MCURSOR_GAMMA_ENABLE (1 << 26) +#define MCURSOR_MEM_TYPE_LOCAL (1 << 25) + + +#define CURSOR_BASEADDR 0x70084 +#define CURSOR_A_BASE CURSOR_BASEADDR +#define CURSOR_BASEADDR_MASK 0x1FFFFF00 +#define CURSOR_A_POSITION 0x70088 +#define CURSOR_POS_SIGN 0x8000 +#define CURSOR_POS_MASK 0x007FF +#define CURSOR_X_SHIFT 0 +#define CURSOR_Y_SHIFT 16 +#define CURSOR_X_LO 0x70088 +#define CURSOR_X_HI 0x70089 +#define CURSOR_X_POS 0x00 +#define CURSOR_X_NEG 0x80 +#define CURSOR_Y_LO 0x7008A +#define CURSOR_Y_HI 0x7008B +#define CURSOR_Y_POS 0x00 +#define CURSOR_Y_NEG 0x80 + +#define CURSOR_A_PALETTE0 0x70090 +#define CURSOR_A_PALETTE1 0x70094 +#define CURSOR_A_PALETTE2 0x70098 +#define CURSOR_A_PALETTE3 0x7009C + +#define CURSOR_SIZE 0x700A0 +#define CURSOR_SIZE_MASK 0x3FF +#define CURSOR_SIZE_HSHIFT 0 +#define CURSOR_SIZE_VSHIFT 12 + +#define CURSOR_B_CONTROL 0x700C0 +#define CURSOR_B_BASE 0x700C4 +#define CURSOR_B_POSITION 0x700C8 +#define CURSOR_B_PALETTE0 0x700D0 +#define CURSOR_B_PALETTE1 0x700D4 +#define CURSOR_B_PALETTE2 0x700D8 +#define CURSOR_B_PALETTE3 0x700DC + + +/* Similar registers exist in Device 0 on the i810 (pp55-65), but I'm + * not sure they refer to local (graphics) memory. + * + * These details are for the local memory control registers, + * (pp301-310). The test machines are not equiped with local memory, + * so nothing is tested. Only a single row seems to be supported. + */ +#define DRAM_ROW_TYPE 0x3000 +#define DRAM_ROW_0 0x01 +#define DRAM_ROW_0_SDRAM 0x01 +#define DRAM_ROW_0_EMPTY 0x00 +#define DRAM_ROW_CNTL_LO 0x3001 +#define DRAM_PAGE_MODE_CTRL 0x10 +#define DRAM_RAS_TO_CAS_OVRIDE 0x08 +#define DRAM_CAS_LATENCY 0x04 +#define DRAM_RAS_TIMING 0x02 +#define DRAM_RAS_PRECHARGE 0x01 +#define DRAM_ROW_CNTL_HI 0x3002 +#define DRAM_REFRESH_RATE 0x18 +#define DRAM_REFRESH_DISABLE 0x00 +#define DRAM_REFRESH_60HZ 0x08 +#define DRAM_REFRESH_FAST_TEST 0x10 +#define DRAM_REFRESH_RESERVED 0x18 +#define DRAM_SMS 0x07 +#define DRAM_SMS_NORMAL 0x00 +#define DRAM_SMS_NOP_ENABLE 0x01 +#define DRAM_SMS_ABPCE 0x02 +#define DRAM_SMS_MRCE 0x03 +#define DRAM_SMS_CBRCE 0x04 + +/* p307 + */ +#define DPMS_SYNC_SELECT 0x5002 +#define VSYNC_CNTL 0x08 +#define VSYNC_ON 0x00 +#define VSYNC_OFF 0x08 +#define HSYNC_CNTL 0x02 +#define HSYNC_ON 0x00 +#define HSYNC_OFF 0x02 + +#define GPIOA 0x5010 +#define GPIOB 0x5014 +#define GPIOC 0x5018 +#define GPIOD 0x501c +#define GPIOE 0x5020 +#define GPIOF 0x5024 +#define GPIOG 0x5028 +#define GPIOH 0x502c +# define GPIO_CLOCK_DIR_MASK (1 << 0) +# define GPIO_CLOCK_DIR_IN (0 << 1) +# define GPIO_CLOCK_DIR_OUT (1 << 1) +# define GPIO_CLOCK_VAL_MASK (1 << 2) +# define GPIO_CLOCK_VAL_OUT (1 << 3) +# define GPIO_CLOCK_VAL_IN (1 << 4) +# define GPIO_CLOCK_PULLUP_DISABLE (1 << 5) +# define GPIO_DATA_DIR_MASK (1 << 8) +# define GPIO_DATA_DIR_IN (0 << 9) +# define GPIO_DATA_DIR_OUT (1 << 9) +# define GPIO_DATA_VAL_MASK (1 << 10) +# define GPIO_DATA_VAL_OUT (1 << 11) +# define GPIO_DATA_VAL_IN (1 << 12) +# define GPIO_DATA_PULLUP_DISABLE (1 << 13) + +/* GMBus registers for hardware-assisted (non-bitbanging) I2C access */ +#define GMBUS0 0x5100 +#define GMBUS1 0x5104 +#define GMBUS2 0x5108 +#define GMBUS3 0x510c +#define GMBUS4 0x5110 +#define GMBUS5 0x5120 + +/* p317, 319 + */ +#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */ +#define VCLK2_VCO_N 0x600a +#define VCLK2_VCO_DIV_SEL 0x6012 + +#define VCLK_DIVISOR_VGA0 0x6000 +#define VCLK_DIVISOR_VGA1 0x6004 +#define VCLK_POST_DIV 0x6010 +/** Selects a post divisor of 4 instead of 2. */ +# define VGA1_PD_P2_DIV_4 (1 << 15) +/** Overrides the p2 post divisor field */ +# define VGA1_PD_P1_DIV_2 (1 << 13) +# define VGA1_PD_P1_SHIFT 8 +/** P1 value is 2 greater than this field */ +# define VGA1_PD_P1_MASK (0x1f << 8) +/** Selects a post divisor of 4 instead of 2. */ +# define VGA0_PD_P2_DIV_4 (1 << 7) +/** Overrides the p2 post divisor field */ +# define VGA0_PD_P1_DIV_2 (1 << 5) +# define VGA0_PD_P1_SHIFT 0 +/** P1 value is 2 greater than this field */ +# define VGA0_PD_P1_MASK (0x1f << 0) + +#define POST_DIV_SELECT 0x70 +#define POST_DIV_1 0x00 +#define POST_DIV_2 0x10 +#define POST_DIV_4 0x20 +#define POST_DIV_8 0x30 +#define POST_DIV_16 0x40 +#define POST_DIV_32 0x50 +#define VCO_LOOP_DIV_BY_4M 0x00 +#define VCO_LOOP_DIV_BY_16M 0x04 + + +/* Instruction Parser Mode Register + * - p281 + * - 2 new bits. + */ +#define INST_PM 0x20c0 +#define AGP_SYNC_PACKET_FLUSH_ENABLE 0x20 /* reserved */ +#define SYNC_PACKET_FLUSH_ENABLE 0x10 +#define TWO_D_INST_DISABLE 0x08 +#define THREE_D_INST_DISABLE 0x04 +#define STATE_VAR_UPDATE_DISABLE 0x02 +#define PAL_STIP_DISABLE 0x01 + + +#define MEMMODE 0x20dc + + +/* Instruction parser error register. p279 + */ +#define IPEIR 0x2088 +#define IPEHR 0x208C + +#define INST_DONE 0x2090 +# define IDCT_DONE (1 << 30) +# define IQ_DONE (1 << 29) +# define PR_DONE (1 << 28) +# define VLD_DONE (1 << 27) +# define IP_DONE (1 << 26) +# define FBC_DONE (1 << 25) +# define BINNER_DONE (1 << 24) +# define SF_DONE (1 << 23) +# define SE_DONE (1 << 22) +# define WM_DONE (1 << 21) +# define IZ_DONE (1 << 20) +# define PERSPECTIVE_INTERP_DONE (1 << 19) +# define DISPATCHER_DONE (1 << 18) +# define PROJECTION_DONE (1 << 17) +# define DEPENDENT_ADDRESS_DONE (1 << 16) +# define QUAD_CACHE_DONE (1 << 15) +# define TEXTURE_FETCH_DONE (1 << 14) +# define TEXTURE_DECOMPRESS_DONE (1 << 13) +# define SAMPLER_CACHE_DONE (1 << 12) +# define FILTER_DONE (1 << 11) +# define BYPASS_FIFO_DONE (1 << 10) +# define PS_DONE (1 << 9) +# define CC_DONE (1 << 8) +# define MAP_FILTER_DONE (1 << 7) +# define MAP_L2_IDLE (1 << 6) +# define RING_2_ENABLE (1 << 2) +# define RING_1_ENABLE (1 << 1) +# define RING_0_ENABLE (1 << 0) + +#define SCPD0 0x209c /* debug */ +#define INST_PS 0x20c4 +#define IPEIR_I965 0x2064 /* i965 */ +#define IPEHR_I965 0x2068 /* i965 */ +#define INST_DONE_I965 0x206c +# define I965_SF_DONE (1 << 23) +# define I965_SE_DONE (1 << 22) +# define I965_WM_DONE (1 << 21) +# define I965_TEXTURE_FETCH_DONE (1 << 14) +# define I965_SAMPLER_CACHE_DONE (1 << 12) +# define I965_FILTER_DONE (1 << 11) +# define I965_PS_DONE (1 << 9) +# define I965_CC_DONE (1 << 8) +# define I965_MAP_FILTER_DONE (1 << 7) +# define I965_MAP_L2_IDLE (1 << 6) +# define I965_CP_DONE (1 << 1) +# define I965_RING_0_ENABLE (1 << 0) +#define INST_PS_I965 0x2070 + +/* Current active ring head address: + */ +#define ACTHD_I965 0x2074 +#define ACTHD 0x20C8 + +/* Current primary/secondary DMA fetch addresses: + */ +#define DMA_FADD_P 0x2078 +#define DMA_FADD_S 0x20d4 +#define INST_DONE_1 0x207c + +#define CACHE_MODE_0 0x2120 +#define CACHE_MODE_1 0x2124 +#define MI_MODE 0x209c +#define MI_DISPLAY_POWER_DOWN 0x20e0 +#define MI_ARB_STATE 0x20e4 +#define MI_RDRET_STATE 0x20fc + +/* Start addresses for each of the primary rings: + */ +#define PR0_STR 0x20f0 +#define PR1_STR 0x20f4 +#define PR2_STR 0x20f8 + +#define WIZ_CTL 0x7c00 +#define WIZ_CTL_SINGLE_SUBSPAN (1<<6) +#define WIZ_CTL_IGNORE_STALLS (1<<5) + +#define SVG_WORK_CTL 0x7408 + +#define TS_CTL 0x7e00 +#define TS_MUX_ERR_CODE (0<<8) +#define TS_MUX_URB_0 (1<<8) +#define TS_MUX_DISPATCH_ID_0 (10<<8) +#define TS_MUX_ERR_CODE_VALID (15<<8) +#define TS_MUX_TID_0 (16<<8) +#define TS_MUX_EUID_0 (18<<8) +#define TS_MUX_FFID_0 (22<<8) +#define TS_MUX_EOT (26<<8) +#define TS_MUX_SIDEBAND_0 (27<<8) +#define TS_SNAP_ALL_CHILD (1<<2) +#define TS_SNAP_ALL_ROOT (1<<1) +#define TS_SNAP_ENABLE (1<<0) + +#define TS_DEBUG_DATA 0x7e0c + +#define TD_CTL 0x8000 +#define TD_CTL2 0x8004 + + +#define ECOSKPD 0x21d0 +#define EXCC 0x2028 + +/* I965 debug regs: + */ +#define IA_VERTICES_COUNT_QW 0x2310 +#define IA_PRIMITIVES_COUNT_QW 0x2318 +#define VS_INVOCATION_COUNT_QW 0x2320 +#define GS_INVOCATION_COUNT_QW 0x2328 +#define GS_PRIMITIVES_COUNT_QW 0x2330 +#define CL_INVOCATION_COUNT_QW 0x2338 +#define CL_PRIMITIVES_COUNT_QW 0x2340 +#define PS_INVOCATION_COUNT_QW 0x2348 +#define PS_DEPTH_COUNT_QW 0x2350 +#define TIMESTAMP_QW 0x2358 +#define CLKCMP_QW 0x2360 + + + + + + +/* General error reporting regs, p296 + */ +#define EIR 0x20B0 +#define EMR 0x20B4 +#define ESR 0x20B8 +# define ERR_VERTEX_MAX (1 << 5) /* lpt/cst */ +# define ERR_PGTBL_ERROR (1 << 4) +# define ERR_DISPLAY_OVERLAY_UNDERRUN (1 << 3) +# define ERR_MAIN_MEMORY_REFRESH (1 << 1) +# define ERR_INSTRUCTION_ERROR (1 << 0) + + +/* Interrupt Control Registers + * - new bits for i810 + * - new register hwstam (mask) + */ +#define HWS_PGA 0x2080 +#define PWRCTXA 0x2088 /* 965GM+ only */ +#define PWRCTX_EN (1<<0) +#define HWSTAM 0x2098 /* p290 */ +#define IER 0x20a0 /* p291 */ +#define IIR 0x20a4 /* p292 */ +#define IMR 0x20a8 /* p293 */ +#define ISR 0x20ac /* p294 */ +#define HW_ERROR 0x8000 +#define SYNC_STATUS_TOGGLE 0x1000 +#define DPY_0_FLIP_PENDING 0x0800 +#define DPY_1_FLIP_PENDING 0x0400 /* not implemented on i810 */ +#define OVL_0_FLIP_PENDING 0x0200 +#define OVL_1_FLIP_PENDING 0x0100 /* not implemented on i810 */ +#define DPY_0_VBLANK 0x0080 +#define DPY_0_EVENT 0x0040 +#define DPY_1_VBLANK 0x0020 /* not implemented on i810 */ +#define DPY_1_EVENT 0x0010 /* not implemented on i810 */ +#define HOST_PORT_EVENT 0x0008 /* */ +#define CAPTURE_EVENT 0x0004 /* */ +#define USER_DEFINED 0x0002 +#define BREAKPOINT 0x0001 + + +#define INTR_RESERVED (0x6000 | \ + DPY_1_FLIP_PENDING | \ + OVL_1_FLIP_PENDING | \ + DPY_1_VBLANK | \ + DPY_1_EVENT | \ + HOST_PORT_EVENT | \ + CAPTURE_EVENT ) + +/* FIFO Watermark and Burst Length Control Register + * + * - different offset and contents on i810 (p299) (fewer bits per field) + * - some overlay fields added + * - what does it all mean? + */ +#define FWATER_BLC 0x20d8 +#define FWATER_BLC2 0x20dc +#define MM_BURST_LENGTH 0x00700000 +#define MM_FIFO_WATERMARK 0x0001F000 +#define LM_BURST_LENGTH 0x00000700 +#define LM_FIFO_WATERMARK 0x0000001F + + +/* Fence/Tiling ranges [0..7] + */ +#define FENCE 0x2000 +#define FENCE_NR 8 + +#define FENCE_NEW 0x3000 +#define FENCE_NEW_NR 16 + +#define FENCE_LINEAR 0 +#define FENCE_XMAJOR 1 +#define FENCE_YMAJOR 2 + +#define I915G_FENCE_START_MASK 0x0ff00000 + +#define I830_FENCE_START_MASK 0x07f80000 + +#define FENCE_START_MASK 0x03F80000 +#define FENCE_X_MAJOR 0x00000000 +#define FENCE_Y_MAJOR 0x00001000 +#define FENCE_SIZE_MASK 0x00000700 +#define FENCE_SIZE_512K 0x00000000 +#define FENCE_SIZE_1M 0x00000100 +#define FENCE_SIZE_2M 0x00000200 +#define FENCE_SIZE_4M 0x00000300 +#define FENCE_SIZE_8M 0x00000400 +#define FENCE_SIZE_16M 0x00000500 +#define FENCE_SIZE_32M 0x00000600 +#define FENCE_SIZE_64M 0x00000700 +#define I915G_FENCE_SIZE_1M 0x00000000 +#define I915G_FENCE_SIZE_2M 0x00000100 +#define I915G_FENCE_SIZE_4M 0x00000200 +#define I915G_FENCE_SIZE_8M 0x00000300 +#define I915G_FENCE_SIZE_16M 0x00000400 +#define I915G_FENCE_SIZE_32M 0x00000500 +#define I915G_FENCE_SIZE_64M 0x00000600 +#define I915G_FENCE_SIZE_128M 0x00000700 +#define I965_FENCE_X_MAJOR 0x00000000 +#define I965_FENCE_Y_MAJOR 0x00000002 +#define FENCE_PITCH_1 0x00000000 +#define FENCE_PITCH_2 0x00000010 +#define FENCE_PITCH_4 0x00000020 +#define FENCE_PITCH_8 0x00000030 +#define FENCE_PITCH_16 0x00000040 +#define FENCE_PITCH_32 0x00000050 +#define FENCE_PITCH_64 0x00000060 +#define FENCE_VALID 0x00000001 + + +/* Registers to control page table, p274 + */ +#define PGETBL_CTL 0x2020 +#define PGETBL_ADDR_MASK 0xFFFFF000 +#define PGETBL_ENABLE_MASK 0x00000001 +#define PGETBL_ENABLED 0x00000001 +/** Added in 965G, this field has the actual size of the global GTT */ +#define PGETBL_SIZE_MASK 0x0000000e +#define PGETBL_SIZE_512KB (0 << 1) +#define PGETBL_SIZE_256KB (1 << 1) +#define PGETBL_SIZE_128KB (2 << 1) +#define PGETBL_SIZE_1MB (3 << 1) +#define PGETBL_SIZE_2MB (4 << 1) +#define PGETBL_SIZE_1_5MB (5 << 1) +#define G33_PGETBL_SIZE_MASK (3 << 8) +#define G33_PGETBL_SIZE_1M (1 << 8) +#define G33_PGETBL_SIZE_2M (2 << 8) + +#define I830_PTE_BASE 0x10000 +#define PTE_ADDRESS_MASK 0xfffff000 +#define PTE_ADDRESS_MASK_HIGH 0x000000f0 /* i915+ */ +#define PTE_MAPPING_TYPE_UNCACHED (0 << 1) +#define PTE_MAPPING_TYPE_DCACHE (1 << 1) /* i830 only */ +#define PTE_MAPPING_TYPE_CACHED (3 << 1) +#define PTE_MAPPING_TYPE_MASK (3 << 1) +#define PTE_VALID (1 << 0) + +/** @defgroup PGE_ERR + * @{ + */ +/** Page table debug register for i845 */ +#define PGE_ERR 0x2024 +#define PGE_ERR_ADDR_MASK 0xFFFFF000 +#define PGE_ERR_ID_MASK 0x00000038 +#define PGE_ERR_CAPTURE 0x00000000 +#define PGE_ERR_OVERLAY 0x00000008 +#define PGE_ERR_DISPLAY 0x00000010 +#define PGE_ERR_HOST 0x00000018 +#define PGE_ERR_RENDER 0x00000020 +#define PGE_ERR_BLITTER 0x00000028 +#define PGE_ERR_MAPPING 0x00000030 +#define PGE_ERR_CMD_PARSER 0x00000038 +#define PGE_ERR_TYPE_MASK 0x00000007 +#define PGE_ERR_INV_TABLE 0x00000000 +#define PGE_ERR_INV_PTE 0x00000001 +#define PGE_ERR_MIXED_TYPES 0x00000002 +#define PGE_ERR_PAGE_MISS 0x00000003 +#define PGE_ERR_ILLEGAL_TRX 0x00000004 +#define PGE_ERR_LOCAL_MEM 0x00000005 +#define PGE_ERR_TILED 0x00000006 +/** @} */ + +/** @defgroup PGTBL_ER + * @{ + */ +/** Page table debug register for i945 */ +# define PGTBL_ER 0x2024 +# define PGTBL_ERR_MT_TILING (1 << 27) +# define PGTBL_ERR_MT_GTT_PTE (1 << 26) +# define PGTBL_ERR_LC_TILING (1 << 25) +# define PGTBL_ERR_LC_GTT_PTE (1 << 24) +# define PGTBL_ERR_BIN_VERTEXDATA_GTT_PTE (1 << 23) +# define PGTBL_ERR_BIN_INSTRUCTION_GTT_PTE (1 << 22) +# define PGTBL_ERR_CS_VERTEXDATA_GTT_PTE (1 << 21) +# define PGTBL_ERR_CS_INSTRUCTION_GTT_PTE (1 << 20) +# define PGTBL_ERR_CS_GTT (1 << 19) +# define PGTBL_ERR_OVERLAY_TILING (1 << 18) +# define PGTBL_ERR_OVERLAY_GTT_PTE (1 << 16) +# define PGTBL_ERR_DISPC_TILING (1 << 14) +# define PGTBL_ERR_DISPC_GTT_PTE (1 << 12) +# define PGTBL_ERR_DISPB_TILING (1 << 10) +# define PGTBL_ERR_DISPB_GTT_PTE (1 << 8) +# define PGTBL_ERR_DISPA_TILING (1 << 6) +# define PGTBL_ERR_DISPA_GTT_PTE (1 << 4) +# define PGTBL_ERR_HOST_PTE_DATA (1 << 1) +# define PGTBL_ERR_HOST_GTT_PTE (1 << 0) +/** @} */ + +/* Ring buffer registers, p277, overview p19 + */ +#define LP_RING 0x2030 +#define HP_RING 0x2040 + +#define RING_TAIL 0x00 +#define TAIL_ADDR 0x000FFFF8 +#define I830_TAIL_MASK 0x001FFFF8 + +#define RING_HEAD 0x04 +#define HEAD_WRAP_COUNT 0xFFE00000 +#define HEAD_WRAP_ONE 0x00200000 +#define HEAD_ADDR 0x001FFFFC +#define I830_HEAD_MASK 0x001FFFFC + +#define RING_START 0x08 +#define START_ADDR 0x03FFFFF8 +#define I830_RING_START_MASK 0xFFFFF000 + +#define RING_LEN 0x0C +#define RING_NR_PAGES 0x001FF000 +#define I830_RING_NR_PAGES 0x001FF000 +#define RING_REPORT_MASK 0x00000006 +#define RING_REPORT_64K 0x00000002 +#define RING_REPORT_128K 0x00000004 +#define RING_NO_REPORT 0x00000000 +#define RING_VALID_MASK 0x00000001 +#define RING_VALID 0x00000001 +#define RING_INVALID 0x00000000 + + + +/* BitBlt Instructions + * + * There are many more masks & ranges yet to add. + */ +#define BR00_BITBLT_CLIENT 0x40000000 +#define BR00_OP_COLOR_BLT 0x10000000 +#define BR00_OP_SRC_COPY_BLT 0x10C00000 +#define BR00_OP_FULL_BLT 0x11400000 +#define BR00_OP_MONO_SRC_BLT 0x11800000 +#define BR00_OP_MONO_SRC_COPY_BLT 0x11000000 +#define BR00_OP_MONO_PAT_BLT 0x11C00000 +#define BR00_OP_MONO_SRC_COPY_IMMEDIATE_BLT (0x61 << 22) +#define BR00_OP_TEXT_IMMEDIATE_BLT 0xc000000 + + +#define BR00_TPCY_DISABLE 0x00000000 +#define BR00_TPCY_ENABLE 0x00000010 + +#define BR00_TPCY_ROP 0x00000000 +#define BR00_TPCY_NO_ROP 0x00000020 +#define BR00_TPCY_EQ 0x00000000 +#define BR00_TPCY_NOT_EQ 0x00000040 + +#define BR00_PAT_MSB_FIRST 0x00000000 /* ? */ + +#define BR00_PAT_VERT_ALIGN 0x000000e0 + +#define BR00_LENGTH 0x0000000F + +#define BR09_DEST_ADDR 0x03FFFFFF + +#define BR11_SOURCE_PITCH 0x00003FFF + +#define BR12_SOURCE_ADDR 0x03FFFFFF + +#define BR13_SOLID_PATTERN 0x80000000 +#define BR13_RIGHT_TO_LEFT 0x40000000 +#define BR13_LEFT_TO_RIGHT 0x00000000 +#define BR13_MONO_TRANSPCY 0x20000000 +#define BR13_MONO_PATN_TRANS 0x10000000 +#define BR13_USE_DYN_DEPTH 0x04000000 +#define BR13_DYN_8BPP 0x00000000 +#define BR13_DYN_16BPP 0x01000000 +#define BR13_DYN_24BPP 0x02000000 +#define BR13_ROP_MASK 0x00FF0000 +#define BR13_DEST_PITCH 0x0000FFFF +#define BR13_PITCH_SIGN_BIT 0x00008000 + +#define BR14_DEST_HEIGHT 0xFFFF0000 +#define BR14_DEST_WIDTH 0x0000FFFF + +#define BR15_PATTERN_ADDR 0x03FFFFFF + +#define BR16_SOLID_PAT_COLOR 0x00FFFFFF +#define BR16_BACKGND_PAT_CLR 0x00FFFFFF + +#define BR17_FGND_PAT_CLR 0x00FFFFFF + +#define BR18_SRC_BGND_CLR 0x00FFFFFF +#define BR19_SRC_FGND_CLR 0x00FFFFFF + + +/* Instruction parser instructions + */ + +#define INST_PARSER_CLIENT 0x00000000 +#define INST_OP_FLUSH 0x02000000 +#define INST_FLUSH_MAP_CACHE 0x00000001 + + +#define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) + + +/* Registers in the i810 host-pci bridge pci config space which affect + * the i810 graphics operations. + */ +#define SMRAM_MISCC 0x70 +#define GMS 0x000000c0 +#define GMS_DISABLE 0x00000000 +#define GMS_ENABLE_BARE 0x00000040 +#define GMS_ENABLE_512K 0x00000080 +#define GMS_ENABLE_1M 0x000000c0 +#define USMM 0x00000030 +#define USMM_DISABLE 0x00000000 +#define USMM_TSEG_ZERO 0x00000010 +#define USMM_TSEG_512K 0x00000020 +#define USMM_TSEG_1M 0x00000030 +#define GFX_MEM_WIN_SIZE 0x00010000 +#define GFX_MEM_WIN_32M 0x00010000 +#define GFX_MEM_WIN_64M 0x00000000 + +/* Overkill? I don't know. Need to figure out top of mem to make the + * SMRAM calculations come out. Linux seems to have problems + * detecting it all on its own, so this seems a reasonable double + * check to any user supplied 'mem=...' boot param. + * + * ... unfortunately this reg doesn't work according to spec on the + * test hardware. + */ +#define WHTCFG_PAMR_DRP 0x50 +#define SYS_DRAM_ROW_0_SHIFT 16 +#define SYS_DRAM_ROW_1_SHIFT 20 +#define DRAM_MASK 0x0f +#define DRAM_VALUE_0 0 +#define DRAM_VALUE_1 8 +/* No 2 value defined */ +#define DRAM_VALUE_3 16 +#define DRAM_VALUE_4 16 +#define DRAM_VALUE_5 24 +#define DRAM_VALUE_6 32 +#define DRAM_VALUE_7 32 +#define DRAM_VALUE_8 48 +#define DRAM_VALUE_9 64 +#define DRAM_VALUE_A 64 +#define DRAM_VALUE_B 96 +#define DRAM_VALUE_C 128 +#define DRAM_VALUE_D 128 +#define DRAM_VALUE_E 192 +#define DRAM_VALUE_F 256 /* nice one, geezer */ +#define LM_FREQ_MASK 0x10 +#define LM_FREQ_133 0x10 +#define LM_FREQ_100 0x00 + + + + +/* These are 3d state registers, but the state is invarient, so we let + * the X server handle it: + */ + + + +/* GFXRENDERSTATE_COLOR_CHROMA_KEY, p135 + */ +#define GFX_OP_COLOR_CHROMA_KEY ((0x3<<29)|(0x1d<<24)|(0x2<<16)|0x1) +#define CC1_UPDATE_KILL_WRITE (1<<28) +#define CC1_ENABLE_KILL_WRITE (1<<27) +#define CC1_DISABLE_KILL_WRITE 0 +#define CC1_UPDATE_COLOR_IDX (1<<26) +#define CC1_UPDATE_CHROMA_LOW (1<<25) +#define CC1_UPDATE_CHROMA_HI (1<<24) +#define CC1_CHROMA_LOW_MASK ((1<<24)-1) +#define CC2_COLOR_IDX_SHIFT 24 +#define CC2_COLOR_IDX_MASK (0xff<<24) +#define CC2_CHROMA_HI_MASK ((1<<24)-1) + + +#define GFX_CMD_CONTEXT_SEL ((0<<29)|(0x5<<23)) +#define CS_UPDATE_LOAD (1<<17) +#define CS_UPDATE_USE (1<<16) +#define CS_UPDATE_LOAD (1<<17) +#define CS_LOAD_CTX0 0 +#define CS_LOAD_CTX1 (1<<8) +#define CS_USE_CTX0 0 +#define CS_USE_CTX1 (1<<0) + +/* I810 LCD/TV registers */ +#define LCD_TV_HTOTAL 0x60000 +#define LCD_TV_C 0x60018 +#define LCD_TV_OVRACT 0x6001C + +#define LCD_TV_ENABLE (1 << 31) +#define LCD_TV_VGAMOD (1 << 28) + +/* I830 CRTC registers */ +#define HTOTAL_A 0x60000 +#define HBLANK_A 0x60004 +#define HSYNC_A 0x60008 +#define VTOTAL_A 0x6000c +#define VBLANK_A 0x60010 +#define VSYNC_A 0x60014 +#define PIPEASRC 0x6001c +#define BCLRPAT_A 0x60020 +#define VSYNCSHIFT_A 0x60028 + +#define HTOTAL_B 0x61000 +#define HBLANK_B 0x61004 +#define HSYNC_B 0x61008 +#define VTOTAL_B 0x6100c +#define VBLANK_B 0x61010 +#define VSYNC_B 0x61014 +#define PIPEBSRC 0x6101c +#define BCLRPAT_B 0x61020 +#define VSYNCSHIFT_B 0x61028 + +#define PP_STATUS 0x61200 +# define PP_ON (1 << 31) +/** + * Indicates that all dependencies of the panel are on: + * + * - PLL enabled + * - pipe enabled + * - LVDS/DVOB/DVOC on + */ +# define PP_READY (1 << 30) +# define PP_SEQUENCE_NONE (0 << 28) +# define PP_SEQUENCE_ON (1 << 28) +# define PP_SEQUENCE_OFF (2 << 28) +# define PP_SEQUENCE_MASK 0x30000000 + +#define PP_CONTROL 0x61204 +# define POWER_DOWN_ON_RESET (1 << 1) +# define POWER_TARGET_ON (1 << 0) + +#define PP_ON_DELAYS 0x61208 +#define PP_OFF_DELAYS 0x6120c +#define PP_DIVISOR 0x61210 + +#define PFIT_CONTROL 0x61230 +# define PFIT_ENABLE (1 << 31) +/* Pre-965 */ +# define VERT_INTERP_DISABLE (0 << 10) +# define VERT_INTERP_BILINEAR (1 << 10) +# define VERT_INTERP_MASK (3 << 10) +# define VERT_AUTO_SCALE (1 << 9) +# define HORIZ_INTERP_DISABLE (0 << 6) +# define HORIZ_INTERP_BILINEAR (1 << 6) +# define HORIZ_INTERP_MASK (3 << 6) +# define HORIZ_AUTO_SCALE (1 << 5) +# define PANEL_8TO6_DITHER_ENABLE (1 << 3) +/* 965+ */ +# define PFIT_PIPE_MASK (3 << 29) +# define PFIT_PIPE_SHIFT 29 +# define PFIT_SCALING_MODE_MASK (7 << 26) +# define PFIT_SCALING_AUTO (0 << 26) +# define PFIT_SCALING_PROGRAMMED (1 << 26) +# define PFIT_SCALING_PILLAR (2 << 26) +# define PFIT_SCALING_LETTER (3 << 26) +# define PFIT_FILTER_SELECT_MASK (3 << 24) +# define PFIT_FILTER_FUZZY (0 << 24) +# define PFIT_FILTER_CRISP (1 << 24) +# define PFIT_FILTER_MEDIAN (2 << 24) + +#define PFIT_PGM_RATIOS 0x61234 +/* Pre-965 */ +# define PFIT_VERT_SCALE_SHIFT 20 +# define PFIT_VERT_SCALE_MASK 0xfff00000 +# define PFIT_HORIZ_SCALE_SHIFT 4 +# define PFIT_HORIZ_SCALE_MASK 0x0000fff0 +/* 965+ */ +# define PFIT_VERT_SCALE_SHIFT_965 16 +# define PFIT_VERT_SCALE_MASK_965 0x1fff0000 +# define PFIT_HORIZ_SCALE_SHIFT_965 0 +# define PFIT_HORIZ_SCALE_MASK_965 0x00001fff + +#define DPLL_A 0x06014 +#define DPLL_B 0x06018 +# define DPLL_VCO_ENABLE (1 << 31) +# define DPLL_DVO_HIGH_SPEED (1 << 30) +# define DPLL_SYNCLOCK_ENABLE (1 << 29) +# define DPLL_VGA_MODE_DIS (1 << 28) +# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ +# define DPLLB_MODE_LVDS (2 << 26) /* i915 */ +# define DPLL_MODE_MASK (3 << 26) +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ +# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ +# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ +# define DPLL_FPA01_P1_POST_DIV_MASK_IGD 0x00ff8000 /* IGD */ +/** + * The i830 generation, in DAC/serial mode, defines p1 as two plus this + * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 +/** + * The i830 generation, in LVDS mode, defines P1 as the bit number set within + * this field (only one bit may be set). + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 +# define DPLL_FPA01_P1_POST_DIV_SHIFT 16 +# define DPLL_FPA01_P1_POST_DIV_SHIFT_IGD 15 +/* IGDNG */ +# define DPLL_FPA0_P1_POST_DIV_SHIFT 16 + +# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */ +# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ +# define PLL_REF_INPUT_DREFCLK (0 << 13) +# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ +# define PLL_REF_INPUT_SUPER_SSC (1 << 13) /* IGDNG: 120M SSC */ +# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ +# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) +# define PLL_REF_INPUT_MASK (3 << 13) +# define PLL_REF_INPUT_DMICLK (5 << 13) /* IGDNG: DMI refclk */ +# define PLL_LOAD_PULSE_PHASE_SHIFT 9 +/* + * Parallel to Serial Load Pulse phase selection. + * Selects the phase for the 10X DPLL clock for the PCIe + * digital display port. The range is 4 to 13; 10 or more + * is just a flip delay. The default is 6 + */ +# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) +# define DISPLAY_RATE_SELECT_FPA1 (1 << 8) +/* IGDNG */ +# define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT 9 +# define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK (7 << 9) +# define PLL_REF_SDVO_HDMI_MULTIPLIER(x) (((x)-1)<< PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) +# define DPLL_FPA1_P1_POST_DIV_SHIFT 0 +# define DPLL_FPA1_P1_POST_DIV_MASK 0xff + +/** + * SDVO multiplier for 945G/GM. Not used on 965. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +# define SDVO_MULTIPLIER_MASK 0x000000ff +# define SDVO_MULTIPLIER_SHIFT_HIRES 4 +# define SDVO_MULTIPLIER_SHIFT_VGA 0 + +/** @defgroup DPLL_MD + * @{ + */ +/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_A_MD 0x0601c +/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_B_MD 0x06020 +/** + * UDI pixel divider, controlling how many pixels are stuffed into a packet. + * + * Value is pixels minus 1. Must be set to 1 pixel for SDVO. + */ +# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 +# define DPLL_MD_UDI_DIVIDER_SHIFT 24 +/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ +# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 +# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 +/** + * SDVO/UDI pixel multiplier. + * + * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus + * clock rate is 10 times the DPLL clock. At low resolution/refresh rate + * modes, the bus rate would be below the limits, so SDVO allows for stuffing + * dummy bytes in the datastream at an increased clock rate, with both sides of + * the link knowing how many bytes are fill. + * + * So, for a mode with a dotclock of 65Mhz, we would want to double the clock + * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be + * set to 130Mhz, and the SDVO multiplier set to 2x in this register and + * through an SDVO command. + * + * This register field has values of multiplication factor minus 1, with + * a maximum multiplier of 5 for SDVO. + */ +# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 +# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 +/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. + * This best be set to the default value (3) or the CRT won't work. No, + * I don't entirely understand what this does... + */ +# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f +# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 +/** @} */ + +#define DPLL_TEST 0x606c +# define DPLLB_TEST_SDVO_DIV_1 (0 << 22) +# define DPLLB_TEST_SDVO_DIV_2 (1 << 22) +# define DPLLB_TEST_SDVO_DIV_4 (2 << 22) +# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) +# define DPLLB_TEST_N_BYPASS (1 << 19) +# define DPLLB_TEST_M_BYPASS (1 << 18) +# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) +# define DPLLA_TEST_N_BYPASS (1 << 3) +# define DPLLA_TEST_M_BYPASS (1 << 2) +# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) + +#define D_STATE 0x6104 +#define DSPCLK_GATE_D 0x6200 +# define DPUNIT_B_CLOCK_GATE_DISABLE (1 << 30) /* 965 */ +# define VSUNIT_CLOCK_GATE_DISABLE (1 << 29) /* 965 */ +# define VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) /* 965 */ +# define VRDUNIT_CLOCK_GATE_DISABLE (1 << 27) /* 965 */ +# define AUDUNIT_CLOCK_GATE_DISABLE (1 << 26) /* 965 */ +# define DPUNIT_A_CLOCK_GATE_DISABLE (1 << 25) /* 965 */ +# define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24) /* 965 */ +# define TVRUNIT_CLOCK_GATE_DISABLE (1 << 23) /* 915-945 */ +# define TVCUNIT_CLOCK_GATE_DISABLE (1 << 22) /* 915-945 */ +# define TVFUNIT_CLOCK_GATE_DISABLE (1 << 21) /* 915-945 */ +# define TVEUNIT_CLOCK_GATE_DISABLE (1 << 20) /* 915-945 */ +# define DVSUNIT_CLOCK_GATE_DISABLE (1 << 19) /* 915-945 */ +# define DSSUNIT_CLOCK_GATE_DISABLE (1 << 18) /* 915-945 */ +# define DDBUNIT_CLOCK_GATE_DISABLE (1 << 17) /* 915-945 */ +# define DPRUNIT_CLOCK_GATE_DISABLE (1 << 16) /* 915-945 */ +# define DPFUNIT_CLOCK_GATE_DISABLE (1 << 15) /* 915-945 */ +# define DPBMUNIT_CLOCK_GATE_DISABLE (1 << 14) /* 915-945 */ +# define DPLSUNIT_CLOCK_GATE_DISABLE (1 << 13) /* 915-945 */ +# define DPLUNIT_CLOCK_GATE_DISABLE (1 << 12) /* 915-945 */ +# define DPOUNIT_CLOCK_GATE_DISABLE (1 << 11) +# define DPBUNIT_CLOCK_GATE_DISABLE (1 << 10) +# define DCUNIT_CLOCK_GATE_DISABLE (1 << 9) +# define DPUNIT_CLOCK_GATE_DISABLE (1 << 8) +# define VRUNIT_CLOCK_GATE_DISABLE (1 << 7) /* 915+: reserved */ +# define OVHUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 830-865 */ +# define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 915-945 */ +# define OVFUNIT_CLOCK_GATE_DISABLE (1 << 5) +# define OVBUNIT_CLOCK_GATE_DISABLE (1 << 4) +/** + * This bit must be set on the 830 to prevent hangs when turning off the + * overlay scaler. + */ +# define OVRUNIT_CLOCK_GATE_DISABLE (1 << 3) +# define OVCUNIT_CLOCK_GATE_DISABLE (1 << 2) +# define OVUUNIT_CLOCK_GATE_DISABLE (1 << 1) +# define ZVUNIT_CLOCK_GATE_DISABLE (1 << 0) /* 830 */ +# define OVLUNIT_CLOCK_GATE_DISABLE (1 << 0) /* 845,865 */ + +#define RENCLK_GATE_D1 0x6204 +# define BLITTER_CLOCK_GATE_DISABLE (1 << 13) /* 945GM only */ +# define MPEG_CLOCK_GATE_DISABLE (1 << 12) /* 945GM only */ +# define PC_FE_CLOCK_GATE_DISABLE (1 << 11) +# define PC_BE_CLOCK_GATE_DISABLE (1 << 10) +# define WINDOWER_CLOCK_GATE_DISABLE (1 << 9) +# define INTERPOLATOR_CLOCK_GATE_DISABLE (1 << 8) +# define COLOR_CALCULATOR_CLOCK_GATE_DISABLE (1 << 7) +# define MOTION_COMP_CLOCK_GATE_DISABLE (1 << 6) +# define MAG_CLOCK_GATE_DISABLE (1 << 5) +/** This bit must be unset on 855,865 */ +# define MECI_CLOCK_GATE_DISABLE (1 << 4) +# define DCMP_CLOCK_GATE_DISABLE (1 << 3) +# define MEC_CLOCK_GATE_DISABLE (1 << 2) +# define MECO_CLOCK_GATE_DISABLE (1 << 1) +/** This bit must be set on 855,865. */ +# define SV_CLOCK_GATE_DISABLE (1 << 0) +# define I915_MPEG_CLOCK_GATE_DISABLE (1 << 16) +# define I915_VLD_IP_PR_CLOCK_GATE_DISABLE (1 << 15) +# define I915_MOTION_COMP_CLOCK_GATE_DISABLE (1 << 14) +# define I915_BD_BF_CLOCK_GATE_DISABLE (1 << 13) +# define I915_SF_SE_CLOCK_GATE_DISABLE (1 << 12) +# define I915_WM_CLOCK_GATE_DISABLE (1 << 11) +# define I915_IZ_CLOCK_GATE_DISABLE (1 << 10) +# define I915_PI_CLOCK_GATE_DISABLE (1 << 9) +# define I915_DI_CLOCK_GATE_DISABLE (1 << 8) +# define I915_SH_SV_CLOCK_GATE_DISABLE (1 << 7) +# define I915_PL_DG_QC_FT_CLOCK_GATE_DISABLE (1 << 6) +# define I915_SC_CLOCK_GATE_DISABLE (1 << 5) +# define I915_FL_CLOCK_GATE_DISABLE (1 << 4) +# define I915_DM_CLOCK_GATE_DISABLE (1 << 3) +# define I915_PS_CLOCK_GATE_DISABLE (1 << 2) +# define I915_CC_CLOCK_GATE_DISABLE (1 << 1) +# define I915_BY_CLOCK_GATE_DISABLE (1 << 0) + +# define I965_RCZ_CLOCK_GATE_DISABLE (1 << 30) +/** This bit must always be set on 965G/965GM */ +# define I965_RCC_CLOCK_GATE_DISABLE (1 << 29) +# define I965_RCPB_CLOCK_GATE_DISABLE (1 << 28) +# define I965_DAP_CLOCK_GATE_DISABLE (1 << 27) +# define I965_ROC_CLOCK_GATE_DISABLE (1 << 26) +# define I965_GW_CLOCK_GATE_DISABLE (1 << 25) +# define I965_TD_CLOCK_GATE_DISABLE (1 << 24) +/** This bit must always be set on 965G */ +# define I965_ISC_CLOCK_GATE_DISABLE (1 << 23) +# define I965_IC_CLOCK_GATE_DISABLE (1 << 22) +# define I965_EU_CLOCK_GATE_DISABLE (1 << 21) +# define I965_IF_CLOCK_GATE_DISABLE (1 << 20) +# define I965_TC_CLOCK_GATE_DISABLE (1 << 19) +# define I965_SO_CLOCK_GATE_DISABLE (1 << 17) +# define I965_FBC_CLOCK_GATE_DISABLE (1 << 16) +# define I965_MARI_CLOCK_GATE_DISABLE (1 << 15) +# define I965_MASF_CLOCK_GATE_DISABLE (1 << 14) +# define I965_MAWB_CLOCK_GATE_DISABLE (1 << 13) +# define I965_EM_CLOCK_GATE_DISABLE (1 << 12) +# define I965_UC_CLOCK_GATE_DISABLE (1 << 11) +# define I965_SI_CLOCK_GATE_DISABLE (1 << 6) +# define I965_MT_CLOCK_GATE_DISABLE (1 << 5) +# define I965_PL_CLOCK_GATE_DISABLE (1 << 4) +# define I965_DG_CLOCK_GATE_DISABLE (1 << 3) +# define I965_QC_CLOCK_GATE_DISABLE (1 << 2) +# define I965_FT_CLOCK_GATE_DISABLE (1 << 1) +# define I965_DM_CLOCK_GATE_DISABLE (1 << 0) + +#define RENCLK_GATE_D2 0x6208 +#define VF_UNIT_CLOCK_GATE_DISABLE (1 << 9) +#define GS_UNIT_CLOCK_GATE_DISABLE (1 << 7) +#define CL_UNIT_CLOCK_GATE_DISABLE (1 << 6) +#define RAMCLK_GATE_D 0x6210 /* CRL only */ +#define DEUC 0x6214 /* CRL only */ + +/* + * This is a PCI config space register to manipulate backlight brightness + * It is used when the BLM_LEGACY_MODE is turned on. When enabled, the first + * byte of this config register sets brightness within the range from + * 0 to 0xff + */ +#define LEGACY_BACKLIGHT_BRIGHTNESS 0xf4 + +#define BLC_PWM_CTL 0x61254 +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) +#define BACKLIGHT_MODULATION_FREQ_SHIFT2 (16) +/** + * This is the most significant 15 bits of the number of backlight cycles in a + * complete cycle of the modulated backlight control. + * + * The actual value is this field multiplied by two. + */ +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BACKLIGHT_MODULATION_FREQ_MASK2 (0xffff << 16) +#define BLM_LEGACY_MODE (1 << 16) + +/** + * This is the number of cycles out of the backlight modulation cycle for which + * the backlight is on. + * + * This field must be no greater than the number of cycles in the complete + * backlight modulation cycle. + */ +#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) +#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) + +/* On 965+ backlight control is in another register */ +#define BLC_PWM_CTL2 0x61250 +#define BLM_LEGACY_MODE2 (1 << 30) + +#define BLM_CTL 0x61260 +#define BLM_THRESHOLD_0 0x61270 +#define BLM_THRESHOLD_1 0x61274 +#define BLM_THRESHOLD_2 0x61278 +#define BLM_THRESHOLD_3 0x6127c +#define BLM_THRESHOLD_4 0x61280 +#define BLM_THRESHOLD_5 0x61284 + +#define BLM_ACCUMULATOR_0 0x61290 +#define BLM_ACCUMULATOR_1 0x61294 +#define BLM_ACCUMULATOR_2 0x61298 +#define BLM_ACCUMULATOR_3 0x6129c +#define BLM_ACCUMULATOR_4 0x612a0 +#define BLM_ACCUMULATOR_5 0x612a4 + +#define FPA0 0x06040 +#define FPA1 0x06044 +#define FPB0 0x06048 +#define FPB1 0x0604c +# define FP_N_DIV_MASK 0x003f0000 +# define FP_N_IGD_DIV_MASK 0x00ff0000 +# define FP_N_DIV_SHIFT 16 +# define FP_M1_DIV_MASK 0x00003f00 +# define FP_M1_DIV_SHIFT 8 +# define FP_M2_DIV_MASK 0x0000003f +# define FP_M2_IGD_DIV_MASK 0x000000ff +# define FP_M2_DIV_SHIFT 0 + +#define PORT_HOTPLUG_EN 0x61110 +# define HDMIB_HOTPLUG_INT_EN (1 << 29) +# define HDMIC_HOTPLUG_INT_EN (1 << 28) +# define HDMID_HOTPLUG_INT_EN (1 << 27) +# define SDVOB_HOTPLUG_INT_EN (1 << 26) +# define SDVOC_HOTPLUG_INT_EN (1 << 25) +# define TV_HOTPLUG_INT_EN (1 << 18) +# define CRT_HOTPLUG_INT_EN (1 << 9) +# define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8) +/* must use period 64 on GM45 according to docs */ +# define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8) +# define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7) +# define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7) +# define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5) +# define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5) +# define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5) +# define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5) +# define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5) +# define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4) +# define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4) +# define CRT_HOTPLUG_FORCE_DETECT (1 << 3) +# define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2) +# define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) +# define CRT_HOTPLUG_MASK (0x3fc) /* Bits 9-2 */ +# define CRT_FORCE_HOTPLUG_MASK 0xfffffe1f + +#define PORT_HOTPLUG_STAT 0x61114 +# define HDMIB_HOTPLUG_INT_STATUS (1 << 29) +# define HDMIC_HOTPLUG_INT_STATUS (1 << 28) +# define HDMID_HOTPLUG_INT_STATUS (1 << 27) +# define CRT_HOTPLUG_INT_STATUS (1 << 11) +# define TV_HOTPLUG_INT_STATUS (1 << 10) +# define CRT_HOTPLUG_MONITOR_MASK (3 << 8) +# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) +# define CRT_HOTPLUG_MONITOR_MONO (2 << 8) +# define CRT_HOTPLUG_MONITOR_NONE (0 << 8) +# define SDVOC_HOTPLUG_INT_STATUS (1 << 7) +# define SDVOB_HOTPLUG_INT_STATUS (1 << 6) + +#define SDVOB 0x61140 +#define SDVOC 0x61160 +#define SDVO_ENABLE (1 << 31) +#define SDVO_PIPE_B_SELECT (1 << 30) +#define SDVO_STALL_SELECT (1 << 29) +#define SDVO_INTERRUPT_ENABLE (1 << 26) +/** + * 915G/GM SDVO pixel multiplier. + * + * Programmed value is multiplier - 1, up to 5x. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +#define SDVO_PORT_MULTIPLY_MASK (7 << 23) +#define SDVO_PORT_MULTIPLY_SHIFT 23 +#define SDVO_PHASE_SELECT_MASK (15 << 19) +#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) +#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) +#define SDVOC_GANG_MODE (1 << 16) +#define SDVO_ENCODING_SDVO (0x0 << 10) +#define SDVO_ENCODING_HDMI (0x2 << 10) +/** Requird for HDMI operation */ +#define SDVO_NULL_PACKETS_DURING_VSYNC (1 << 9) +#define SDVO_COLOR_NOT_FULL_RANGE (1 << 8) +#define SDVO_BORDER_ENABLE (1 << 7) +#define SDVO_AUDIO_ENABLE (1 << 6) +/** New with 965, default is to be set */ +#define SDVO_VSYNC_ACTIVE_HIGH (1 << 4) +/** New with 965, default is to be set */ +#define SDVO_HSYNC_ACTIVE_HIGH (1 << 3) +/** 915/945 only, read-only bit */ +#define SDVOB_PCIE_CONCURRENCY (1 << 3) +#define SDVO_DETECTED (1 << 2) +/* Bits to be preserved when writing */ +#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) +#define SDVOC_PRESERVE_MASK (1 << 17) + +#define UDIB_SVB_SHB_CODES 0x61144 +#define UDIB_SHA_BLANK_CODES 0x61148 +#define UDIB_START_END_FILL_CODES 0x6114c + + +#define SDVOUDI 0x61150 + +#define I830_HTOTAL_MASK 0xfff0000 +#define I830_HACTIVE_MASK 0x7ff + +#define I830_HBLANKEND_MASK 0xfff0000 +#define I830_HBLANKSTART_MASK 0xfff + +#define I830_HSYNCEND_MASK 0xfff0000 +#define I830_HSYNCSTART_MASK 0xfff + +#define I830_VTOTAL_MASK 0xfff0000 +#define I830_VACTIVE_MASK 0x7ff + +#define I830_VBLANKEND_MASK 0xfff0000 +#define I830_VBLANKSTART_MASK 0xfff + +#define I830_VSYNCEND_MASK 0xfff0000 +#define I830_VSYNCSTART_MASK 0xfff + +#define I830_PIPEA_HORZ_MASK 0x7ff0000 +#define I830_PIPEA_VERT_MASK 0x7ff + +#define ADPA 0x61100 +#define ADPA_DAC_ENABLE (1<<31) +#define ADPA_DAC_DISABLE 0 +#define ADPA_PIPE_SELECT_MASK (1<<30) +#define ADPA_PIPE_A_SELECT 0 +#define ADPA_PIPE_B_SELECT (1<<30) +#define ADPA_USE_VGA_HVPOLARITY (1<<15) +#define ADPA_SETS_HVPOLARITY 0 +#define ADPA_VSYNC_CNTL_DISABLE (1<<11) +#define ADPA_VSYNC_CNTL_ENABLE 0 +#define ADPA_HSYNC_CNTL_DISABLE (1<<10) +#define ADPA_HSYNC_CNTL_ENABLE 0 +#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) +#define ADPA_VSYNC_ACTIVE_LOW 0 +#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) +#define ADPA_HSYNC_ACTIVE_LOW 0 + + +#define DVOA 0x61120 +#define DVOB 0x61140 +#define DVOC 0x61160 +#define DVO_ENABLE (1 << 31) +#define DVO_PIPE_B_SELECT (1 << 30) +#define DVO_PIPE_STALL_UNUSED (0 << 28) +#define DVO_PIPE_STALL (1 << 28) +#define DVO_PIPE_STALL_TV (2 << 28) +#define DVO_PIPE_STALL_MASK (3 << 28) +#define DVO_USE_VGA_SYNC (1 << 15) +#define DVO_DATA_ORDER_I740 (0 << 14) +#define DVO_DATA_ORDER_FP (1 << 14) +#define DVO_VSYNC_DISABLE (1 << 11) +#define DVO_HSYNC_DISABLE (1 << 10) +#define DVO_VSYNC_TRISTATE (1 << 9) +#define DVO_HSYNC_TRISTATE (1 << 8) +#define DVO_BORDER_ENABLE (1 << 7) +#define DVO_DATA_ORDER_GBRG (1 << 6) +#define DVO_DATA_ORDER_RGGB (0 << 6) +#define DVO_DATA_ORDER_GBRG_ERRATA (0 << 6) +#define DVO_DATA_ORDER_RGGB_ERRATA (1 << 6) +#define DVO_VSYNC_ACTIVE_HIGH (1 << 4) +#define DVO_HSYNC_ACTIVE_HIGH (1 << 3) +#define DVO_BLANK_ACTIVE_HIGH (1 << 2) +#define DVO_OUTPUT_CSTATE_PIXELS (1 << 1) /* SDG only */ +#define DVO_OUTPUT_SOURCE_SIZE_PIXELS (1 << 0) /* SDG only */ +#define DVO_PRESERVE_MASK (0x7<<24) + +#define DVOA_SRCDIM 0x61124 +#define DVOB_SRCDIM 0x61144 +#define DVOC_SRCDIM 0x61164 +#define DVO_SRCDIM_HORIZONTAL_SHIFT 12 +#define DVO_SRCDIM_VERTICAL_SHIFT 0 + +/** @defgroup LVDS + * @{ + */ +/** + * This register controls the LVDS output enable, pipe selection, and data + * format selection. + * + * All of the clock/data pairs are force powered down by power sequencing. + */ +#define LVDS 0x61180 +/** + * Enables the LVDS port. This bit must be set before DPLLs are enabled, as + * the DPLL semantics change when the LVDS is assigned to that pipe. + */ +# define LVDS_PORT_EN (1 << 31) +/** Selects pipe B for LVDS data. Must be set on pre-965. */ +# define LVDS_PIPEB_SELECT (1 << 30) + +/* on 965, dithering is enabled in this register, not PFIT_CONTROL */ +# define LVDS_DITHER_ENABLE (1 << 25) + +/* + * Selects between .0 and .1 formats: + * + * 0 = 1x18.0, 2x18.0, 1x24.0 or 2x24.0 + * 1 = 1x24.1 or 2x24.1 + */ +# define LVDS_DATA_FORMAT_DOT_ONE (1 << 24) + +/* Using LE instead of HS on second channel control signal */ +# define LVDS_LE_CONTROL_ENABLE (1 << 23) + +/* Using LF instead of VS on second channel control signal */ +# define LVDS_LF_CONTROL_ENABLE (1 << 22) + +/* invert vsync signal polarity */ +# define LVDS_VSYNC_POLARITY_INVERT (1 << 21) + +/* invert hsync signal polarity */ +# define LVDS_HSYNC_POLARITY_INVERT (1 << 20) + +/* invert display enable signal polarity */ +# define LVDS_DE_POLARITY_INVERT (1 << 19) + +/* + * Control signals for second channel, ignored in single channel modes + */ + +/* send DE, HS, VS on second channel */ +# define LVDS_SECOND_CHANNEL_DE_HS_VS (0 << 17) + +# define LVDS_SECOND_CHANNEL_RESERVED (1 << 17) + +/* Send zeros instead of DE, HS, VS on second channel */ +# define LVDS_SECOND_CHANNEL_ZEROS (2 << 17) + +/* Set DE=0, HS=LE, VS=LF on second channel */ +# define LVDS_SECOND_CHANNEL_HS_VS (3 << 17) + +/* + * Send duplicate data for channel reserved bits, otherwise send zeros + */ +# define LVDS_CHANNEL_DUP_RESERVED (1 << 16) + +/* + * Enable border for unscaled (or aspect-scaled) display + */ +# define LVDS_BORDER_ENABLE (1 << 15) + +/* + * Tri-state the LVDS buffers when powered down, otherwise + * they are set to 0V + */ +# define LVDS_POWER_DOWN_TRI_STATE (1 << 10) + +/** + * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per + * pixel. + */ +# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) +# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) +# define LVDS_A0A2_CLKA_POWER_UP (3 << 8) +/** + * Controls the A3 data pair, which contains the additional LSBs for 24 bit + * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be + * on. + */ +# define LVDS_A3_POWER_MASK (3 << 6) +# define LVDS_A3_POWER_DOWN (0 << 6) +# define LVDS_A3_POWER_UP (3 << 6) +/** + * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP + * is set. + */ +# define LVDS_CLKB_POWER_MASK (3 << 4) +# define LVDS_CLKB_POWER_DOWN (0 << 4) +# define LVDS_CLKB_POWER_UP (3 << 4) + +/** + * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 + * setting for whether we are in dual-channel mode. The B3 pair will + * additionally only be powered up when LVDS_A3_POWER_UP is set. + */ +# define LVDS_B0B3_POWER_MASK (3 << 2) +# define LVDS_B0B3_POWER_DOWN (0 << 2) +# define LVDS_B0B3_POWER_UP (3 << 2) + +/** @} */ + +#define DP_B 0x64100 +#define DPB_AUX_CH_CTL 0x64110 +#define DPB_AUX_CH_DATA1 0x64114 +#define DPB_AUX_CH_DATA2 0x64118 +#define DPB_AUX_CH_DATA3 0x6411c +#define DPB_AUX_CH_DATA4 0x64120 +#define DPB_AUX_CH_DATA5 0x64124 + +#define DP_C 0x64200 +#define DPC_AUX_CH_CTL 0x64210 +#define DPC_AUX_CH_DATA1 0x64214 +#define DPC_AUX_CH_DATA2 0x64218 +#define DPC_AUX_CH_DATA3 0x6421c +#define DPC_AUX_CH_DATA4 0x64220 +#define DPC_AUX_CH_DATA5 0x64224 + +#define DP_D 0x64300 +#define DPD_AUX_CH_CTL 0x64310 +#define DPD_AUX_CH_DATA1 0x64314 +#define DPD_AUX_CH_DATA2 0x64318 +#define DPD_AUX_CH_DATA3 0x6431c +#define DPD_AUX_CH_DATA4 0x64320 +#define DPD_AUX_CH_DATA5 0x64324 + +/* + * Two channel clock control. Turn this on if you need clkb for two channel mode + * Overridden by global LVDS power sequencing + */ + +/* clkb off */ +# define LVDS_CLKB_POWER_DOWN (0 << 4) + +/* powered up, but clkb forced to 0 */ +# define LVDS_CLKB_POWER_PARTIAL (1 << 4) + +/* clock B running */ +# define LVDS_CLKB_POWER_UP (3 << 4) + +/* + * Two channel mode B0-B2 control. Sets state when power is on. + * Set to POWER_DOWN in single channel mode, other settings enable + * two channel mode. The CLKB power control controls whether that clock + * is enabled during two channel mode. + * + */ +/* Everything is off, including B3 and CLKB */ +# define LVDS_B_POWER_DOWN (0 << 2) + +/* B0, B1, B2 and data lines forced to 0. timing is active */ +# define LVDS_B_POWER_PARTIAL (1 << 2) + +/* data lines active (both timing and colour) */ +# define LVDS_B_POWER_UP (3 << 2) + +/** @defgroup TV_CTL + * @{ + */ +#define TV_CTL 0x68000 +/** Enables the TV encoder */ +# define TV_ENC_ENABLE (1 << 31) +/** Sources the TV encoder input from pipe B instead of A. */ +# define TV_ENC_PIPEB_SELECT (1 << 30) +/** Outputs composite video (DAC A only) */ +# define TV_ENC_OUTPUT_COMPOSITE (0 << 28) +/** Outputs SVideo video (DAC B/C) */ +# define TV_ENC_OUTPUT_SVIDEO (1 << 28) +/** Outputs Component video (DAC A/B/C) */ +# define TV_ENC_OUTPUT_COMPONENT (2 << 28) +/** Outputs Composite and SVideo (DAC A/B/C) */ +# define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28) +# define TV_TRILEVEL_SYNC (1 << 21) +/** Enables slow sync generation (945GM only) */ +# define TV_SLOW_SYNC (1 << 20) +/** Selects 4x oversampling for 480i and 576p */ +# define TV_OVERSAMPLE_4X (0 << 18) +/** Selects 2x oversampling for 720p and 1080i */ +# define TV_OVERSAMPLE_2X (1 << 18) +/** Selects no oversampling for 1080p */ +# define TV_OVERSAMPLE_NONE (2 << 18) +/** Selects 8x oversampling */ +# define TV_OVERSAMPLE_8X (3 << 18) +/** Selects progressive mode rather than interlaced */ +# define TV_PROGRESSIVE (1 << 17) +/** Sets the colorburst to PAL mode. Required for non-M PAL modes. */ +# define TV_PAL_BURST (1 << 16) +/** Field for setting delay of Y compared to C */ +# define TV_YC_SKEW_MASK (7 << 12) +/** Enables a fix for 480p/576p standard definition modes on the 915GM only */ +# define TV_ENC_SDP_FIX (1 << 11) +/** + * Enables a fix for the 915GM only. + * + * Not sure what it does. + */ +# define TV_ENC_C0_FIX (1 << 10) +/** Bits that must be preserved by software */ +# define TV_CTL_SAVE ((1 << 11) | (3 << 9) | (7 << 6) | 0xf) +# define TV_FUSE_STATE_MASK (3 << 4) +/** Read-only state that reports all features enabled */ +# define TV_FUSE_STATE_ENABLED (0 << 4) +/** Read-only state that reports that Macrovision is disabled in hardware*/ +# define TV_FUSE_STATE_NO_MACROVISION (1 << 4) +/** Read-only state that reports that TV-out is disabled in hardware. */ +# define TV_FUSE_STATE_DISABLED (2 << 4) +/** Normal operation */ +# define TV_TEST_MODE_NORMAL (0 << 0) +/** Encoder test pattern 1 - combo pattern */ +# define TV_TEST_MODE_PATTERN_1 (1 << 0) +/** Encoder test pattern 2 - full screen vertical 75% color bars */ +# define TV_TEST_MODE_PATTERN_2 (2 << 0) +/** Encoder test pattern 3 - full screen horizontal 75% color bars */ +# define TV_TEST_MODE_PATTERN_3 (3 << 0) +/** Encoder test pattern 4 - random noise */ +# define TV_TEST_MODE_PATTERN_4 (4 << 0) +/** Encoder test pattern 5 - linear color ramps */ +# define TV_TEST_MODE_PATTERN_5 (5 << 0) +/** + * This test mode forces the DACs to 50% of full output. + * + * This is used for load detection in combination with TVDAC_SENSE_MASK + */ +# define TV_TEST_MODE_MONITOR_DETECT (7 << 0) +# define TV_TEST_MODE_MASK (7 << 0) +/** @} */ + +/** @defgroup TV_DAC + * @{ + */ +#define TV_DAC 0x68004 +/** + * Reports that DAC state change logic has reported change (RO). + * + * This gets cleared when TV_DAC_STATE_EN is cleared +*/ +# define TVDAC_STATE_CHG (1 << 31) +# define TVDAC_SENSE_MASK (7 << 28) +/** Reports that DAC A voltage is above the detect threshold */ +# define TVDAC_A_SENSE (1 << 30) +/** Reports that DAC B voltage is above the detect threshold */ +# define TVDAC_B_SENSE (1 << 29) +/** Reports that DAC C voltage is above the detect threshold */ +# define TVDAC_C_SENSE (1 << 28) +/** + * Enables DAC state detection logic, for load-based TV detection. + * + * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set + * to off, for load detection to work. + */ +# define TVDAC_STATE_CHG_EN (1 << 27) +/** Sets the DAC A sense value to high */ +# define TVDAC_A_SENSE_CTL (1 << 26) +/** Sets the DAC B sense value to high */ +# define TVDAC_B_SENSE_CTL (1 << 25) +/** Sets the DAC C sense value to high */ +# define TVDAC_C_SENSE_CTL (1 << 24) +/** Overrides the ENC_ENABLE and DAC voltage levels */ +# define DAC_CTL_OVERRIDE (1 << 7) +/** Sets the slew rate. Must be preserved in software */ +# define ENC_TVDAC_SLEW_FAST (1 << 6) +# define DAC_A_1_3_V (0 << 4) +# define DAC_A_1_1_V (1 << 4) +# define DAC_A_0_7_V (2 << 4) +# define DAC_A_MASK (3 << 4) +# define DAC_B_1_3_V (0 << 2) +# define DAC_B_1_1_V (1 << 2) +# define DAC_B_0_7_V (2 << 2) +# define DAC_B_MASK (3 << 2) +# define DAC_C_1_3_V (0 << 0) +# define DAC_C_1_1_V (1 << 0) +# define DAC_C_0_7_V (2 << 0) +# define DAC_C_MASK (3 << 0) +/** @} */ + +/** + * CSC coefficients are stored in a floating point format with 9 bits of + * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n, + * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with + * -1 (0x3) being the only legal negative value. + */ +#define TV_CSC_Y 0x68010 +# define TV_RY_MASK 0x07ff0000 +# define TV_RY_SHIFT 16 +# define TV_GY_MASK 0x00000fff +# define TV_GY_SHIFT 0 + +#define TV_CSC_Y2 0x68014 +# define TV_BY_MASK 0x07ff0000 +# define TV_BY_SHIFT 16 +/** + * Y attenuation for component video. + * + * Stored in 1.9 fixed point. + */ +# define TV_AY_MASK 0x000003ff +# define TV_AY_SHIFT 0 + +#define TV_CSC_U 0x68018 +# define TV_RU_MASK 0x07ff0000 +# define TV_RU_SHIFT 16 +# define TV_GU_MASK 0x000007ff +# define TV_GU_SHIFT 0 + +#define TV_CSC_U2 0x6801c +# define TV_BU_MASK 0x07ff0000 +# define TV_BU_SHIFT 16 +/** + * U attenuation for component video. + * + * Stored in 1.9 fixed point. + */ +# define TV_AU_MASK 0x000003ff +# define TV_AU_SHIFT 0 + +#define TV_CSC_V 0x68020 +# define TV_RV_MASK 0x0fff0000 +# define TV_RV_SHIFT 16 +# define TV_GV_MASK 0x000007ff +# define TV_GV_SHIFT 0 + +#define TV_CSC_V2 0x68024 +# define TV_BV_MASK 0x07ff0000 +# define TV_BV_SHIFT 16 +/** + * V attenuation for component video. + * + * Stored in 1.9 fixed point. + */ +# define TV_AV_MASK 0x000007ff +# define TV_AV_SHIFT 0 + +/** @defgroup TV_CSC_KNOBS + * @{ + */ +#define TV_CLR_KNOBS 0x68028 +/** 2s-complement brightness adjustment */ +# define TV_BRIGHTNESS_MASK 0xff000000 +# define TV_BRIGHTNESS_SHIFT 24 +/** Contrast adjustment, as a 2.6 unsigned floating point number */ +# define TV_CONTRAST_MASK 0x00ff0000 +# define TV_CONTRAST_SHIFT 16 +/** Saturation adjustment, as a 2.6 unsigned floating point number */ +# define TV_SATURATION_MASK 0x0000ff00 +# define TV_SATURATION_SHIFT 8 +/** Hue adjustment, as an integer phase angle in degrees */ +# define TV_HUE_MASK 0x000000ff +# define TV_HUE_SHIFT 0 +/** @} */ + +/** @defgroup TV_CLR_LEVEL + * @{ + */ +#define TV_CLR_LEVEL 0x6802c +/** Controls the DAC level for black */ +# define TV_BLACK_LEVEL_MASK 0x01ff0000 +# define TV_BLACK_LEVEL_SHIFT 16 +/** Controls the DAC level for blanking */ +# define TV_BLANK_LEVEL_MASK 0x000001ff +# define TV_BLANK_LEVEL_SHIFT 0 +/* @} */ + +/** @defgroup TV_H_CTL_1 + * @{ + */ +#define TV_H_CTL_1 0x68030 +/** Number of pixels in the hsync. */ +# define TV_HSYNC_END_MASK 0x1fff0000 +# define TV_HSYNC_END_SHIFT 16 +/** Total number of pixels minus one in the line (display and blanking). */ +# define TV_HTOTAL_MASK 0x00001fff +# define TV_HTOTAL_SHIFT 0 +/** @} */ + +/** @defgroup TV_H_CTL_2 + * @{ + */ +#define TV_H_CTL_2 0x68034 +/** Enables the colorburst (needed for non-component color) */ +# define TV_BURST_ENA (1 << 31) +/** Offset of the colorburst from the start of hsync, in pixels minus one. */ +# define TV_HBURST_START_SHIFT 16 +# define TV_HBURST_START_MASK 0x1fff0000 +/** Length of the colorburst */ +# define TV_HBURST_LEN_SHIFT 0 +# define TV_HBURST_LEN_MASK 0x0001fff +/** @} */ + +/** @defgroup TV_H_CTL_3 + * @{ + */ +#define TV_H_CTL_3 0x68038 +/** End of hblank, measured in pixels minus one from start of hsync */ +# define TV_HBLANK_END_SHIFT 16 +# define TV_HBLANK_END_MASK 0x1fff0000 +/** Start of hblank, measured in pixels minus one from start of hsync */ +# define TV_HBLANK_START_SHIFT 0 +# define TV_HBLANK_START_MASK 0x0001fff +/** @} */ + +/** @defgroup TV_V_CTL_1 + * @{ + */ +#define TV_V_CTL_1 0x6803c +/** XXX */ +# define TV_NBR_END_SHIFT 16 +# define TV_NBR_END_MASK 0x07ff0000 +/** XXX */ +# define TV_VI_END_F1_SHIFT 8 +# define TV_VI_END_F1_MASK 0x00003f00 +/** XXX */ +# define TV_VI_END_F2_SHIFT 0 +# define TV_VI_END_F2_MASK 0x0000003f +/** @} */ + +/** @defgroup TV_V_CTL_2 + * @{ + */ +#define TV_V_CTL_2 0x68040 +/** Length of vsync, in half lines */ +# define TV_VSYNC_LEN_MASK 0x07ff0000 +# define TV_VSYNC_LEN_SHIFT 16 +/** Offset of the start of vsync in field 1, measured in one less than the + * number of half lines. + */ +# define TV_VSYNC_START_F1_MASK 0x00007f00 +# define TV_VSYNC_START_F1_SHIFT 8 +/** + * Offset of the start of vsync in field 2, measured in one less than the + * number of half lines. + */ +# define TV_VSYNC_START_F2_MASK 0x0000007f +# define TV_VSYNC_START_F2_SHIFT 0 +/** @} */ + +/** @defgroup TV_V_CTL_3 + * @{ + */ +#define TV_V_CTL_3 0x68044 +/** Enables generation of the equalization signal */ +# define TV_EQUAL_ENA (1 << 31) +/** Length of vsync, in half lines */ +# define TV_VEQ_LEN_MASK 0x007f0000 +# define TV_VEQ_LEN_SHIFT 16 +/** Offset of the start of equalization in field 1, measured in one less than + * the number of half lines. + */ +# define TV_VEQ_START_F1_MASK 0x0007f00 +# define TV_VEQ_START_F1_SHIFT 8 +/** + * Offset of the start of equalization in field 2, measured in one less than + * the number of half lines. + */ +# define TV_VEQ_START_F2_MASK 0x000007f +# define TV_VEQ_START_F2_SHIFT 0 +/** @} */ + +/** @defgroup TV_V_CTL_4 + * @{ + */ +#define TV_V_CTL_4 0x68048 +/** + * Offset to start of vertical colorburst, measured in one less than the + * number of lines from vertical start. + */ +# define TV_VBURST_START_F1_MASK 0x003f0000 +# define TV_VBURST_START_F1_SHIFT 16 +/** + * Offset to the end of vertical colorburst, measured in one less than the + * number of lines from the start of NBR. + */ +# define TV_VBURST_END_F1_MASK 0x000000ff +# define TV_VBURST_END_F1_SHIFT 0 +/** @} */ + +/** @defgroup TV_V_CTL_5 + * @{ + */ +#define TV_V_CTL_5 0x6804c +/** + * Offset to start of vertical colorburst, measured in one less than the + * number of lines from vertical start. + */ +# define TV_VBURST_START_F2_MASK 0x003f0000 +# define TV_VBURST_START_F2_SHIFT 16 +/** + * Offset to the end of vertical colorburst, measured in one less than the + * number of lines from the start of NBR. + */ +# define TV_VBURST_END_F2_MASK 0x000000ff +# define TV_VBURST_END_F2_SHIFT 0 +/** @} */ + +/** @defgroup TV_V_CTL_6 + * @{ + */ +#define TV_V_CTL_6 0x68050 +/** + * Offset to start of vertical colorburst, measured in one less than the + * number of lines from vertical start. + */ +# define TV_VBURST_START_F3_MASK 0x003f0000 +# define TV_VBURST_START_F3_SHIFT 16 +/** + * Offset to the end of vertical colorburst, measured in one less than the + * number of lines from the start of NBR. + */ +# define TV_VBURST_END_F3_MASK 0x000000ff +# define TV_VBURST_END_F3_SHIFT 0 +/** @} */ + +/** @defgroup TV_V_CTL_7 + * @{ + */ +#define TV_V_CTL_7 0x68054 +/** + * Offset to start of vertical colorburst, measured in one less than the + * number of lines from vertical start. + */ +# define TV_VBURST_START_F4_MASK 0x003f0000 +# define TV_VBURST_START_F4_SHIFT 16 +/** + * Offset to the end of vertical colorburst, measured in one less than the + * number of lines from the start of NBR. + */ +# define TV_VBURST_END_F4_MASK 0x000000ff +# define TV_VBURST_END_F4_SHIFT 0 +/** @} */ + +/** @defgroup TV_SC_CTL_1 + * @{ + */ +#define TV_SC_CTL_1 0x68060 +/** Turns on the first subcarrier phase generation DDA */ +# define TV_SC_DDA1_EN (1 << 31) +/** Turns on the first subcarrier phase generation DDA */ +# define TV_SC_DDA2_EN (1 << 30) +/** Turns on the first subcarrier phase generation DDA */ +# define TV_SC_DDA3_EN (1 << 29) +/** Sets the subcarrier DDA to reset frequency every other field */ +# define TV_SC_RESET_EVERY_2 (0 << 24) +/** Sets the subcarrier DDA to reset frequency every fourth field */ +# define TV_SC_RESET_EVERY_4 (1 << 24) +/** Sets the subcarrier DDA to reset frequency every eighth field */ +# define TV_SC_RESET_EVERY_8 (2 << 24) +/** Sets the subcarrier DDA to never reset the frequency */ +# define TV_SC_RESET_NEVER (3 << 24) +/** Sets the peak amplitude of the colorburst.*/ +# define TV_BURST_LEVEL_MASK 0x00ff0000 +# define TV_BURST_LEVEL_SHIFT 16 +/** Sets the increment of the first subcarrier phase generation DDA */ +# define TV_SCDDA1_INC_MASK 0x00000fff +# define TV_SCDDA1_INC_SHIFT 0 +/** @} */ + +/** @defgroup TV_SC_CTL_2 + * @{ + */ +#define TV_SC_CTL_2 0x68064 +/** Sets the rollover for the second subcarrier phase generation DDA */ +# define TV_SCDDA2_SIZE_MASK 0x7fff0000 +# define TV_SCDDA2_SIZE_SHIFT 16 +/** Sets the increent of the second subcarrier phase generation DDA */ +# define TV_SCDDA2_INC_MASK 0x00007fff +# define TV_SCDDA2_INC_SHIFT 0 +/** @} */ + +/** @defgroup TV_SC_CTL_3 + * @{ + */ +#define TV_SC_CTL_3 0x68068 +/** Sets the rollover for the third subcarrier phase generation DDA */ +# define TV_SCDDA3_SIZE_MASK 0x7fff0000 +# define TV_SCDDA3_SIZE_SHIFT 16 +/** Sets the increent of the third subcarrier phase generation DDA */ +# define TV_SCDDA3_INC_MASK 0x00007fff +# define TV_SCDDA3_INC_SHIFT 0 +/** @} */ + +/** @defgroup TV_WIN_POS + * @{ + */ +#define TV_WIN_POS 0x68070 +/** X coordinate of the display from the start of horizontal active */ +# define TV_XPOS_MASK 0x1fff0000 +# define TV_XPOS_SHIFT 16 +/** Y coordinate of the display from the start of vertical active (NBR) */ +# define TV_YPOS_MASK 0x00000fff +# define TV_YPOS_SHIFT 0 +/** @} */ + +/** @defgroup TV_WIN_SIZE + * @{ + */ +#define TV_WIN_SIZE 0x68074 +/** Horizontal size of the display window, measured in pixels*/ +# define TV_XSIZE_MASK 0x1fff0000 +# define TV_XSIZE_SHIFT 16 +/** + * Vertical size of the display window, measured in pixels. + * + * Must be even for interlaced modes. + */ +# define TV_YSIZE_MASK 0x00000fff +# define TV_YSIZE_SHIFT 0 +/** @} */ + +/** @defgroup TV_FILTER_CTL_1 + * @{ + */ +#define TV_FILTER_CTL_1 0x68080 +/** + * Enables automatic scaling calculation. + * + * If set, the rest of the registers are ignored, and the calculated values can + * be read back from the register. + */ +# define TV_AUTO_SCALE (1 << 31) +/** + * Disables the vertical filter. + * + * This is required on modes more than 1024 pixels wide */ +# define TV_V_FILTER_BYPASS (1 << 29) +/** Enables adaptive vertical filtering */ +# define TV_VADAPT (1 << 28) +# define TV_VADAPT_MODE_MASK (3 << 26) +/** Selects the least adaptive vertical filtering mode */ +# define TV_VADAPT_MODE_LEAST (0 << 26) +/** Selects the moderately adaptive vertical filtering mode */ +# define TV_VADAPT_MODE_MODERATE (1 << 26) +/** Selects the most adaptive vertical filtering mode */ +# define TV_VADAPT_MODE_MOST (3 << 26) +/** + * Sets the horizontal scaling factor. + * + * This should be the fractional part of the horizontal scaling factor divided + * by the oversampling rate. TV_HSCALE should be less than 1, and set to: + * + * (src width - 1) / ((oversample * dest width) - 1) + */ +# define TV_HSCALE_FRAC_MASK 0x00003fff +# define TV_HSCALE_FRAC_SHIFT 0 +/** @} */ + +/** @defgroup TV_FILTER_CTL_2 + * @{ + */ +#define TV_FILTER_CTL_2 0x68084 +/** + * Sets the integer part of the 3.15 fixed-point vertical scaling factor. + * + * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1) + */ +# define TV_VSCALE_INT_MASK 0x00038000 +# define TV_VSCALE_INT_SHIFT 15 +/** + * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. + * + * \sa TV_VSCALE_INT_MASK + */ +# define TV_VSCALE_FRAC_MASK 0x00007fff +# define TV_VSCALE_FRAC_SHIFT 0 +/** @} */ + +/** @defgroup TV_FILTER_CTL_3 + * @{ + */ +#define TV_FILTER_CTL_3 0x68088 +/** + * Sets the integer part of the 3.15 fixed-point vertical scaling factor. + * + * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1)) + * + * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. + */ +# define TV_VSCALE_IP_INT_MASK 0x00038000 +# define TV_VSCALE_IP_INT_SHIFT 15 +/** + * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. + * + * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. + * + * \sa TV_VSCALE_IP_INT_MASK + */ +# define TV_VSCALE_IP_FRAC_MASK 0x00007fff +# define TV_VSCALE_IP_FRAC_SHIFT 0 +/** @} */ + +/** @defgroup TV_CC_CONTROL + * @{ + */ +#define TV_CC_CONTROL 0x68090 +# define TV_CC_ENABLE (1 << 31) +/** + * Specifies which field to send the CC data in. + * + * CC data is usually sent in field 0. + */ +# define TV_CC_FID_MASK (1 << 27) +# define TV_CC_FID_SHIFT 27 +/** Sets the horizontal position of the CC data. Usually 135. */ +# define TV_CC_HOFF_MASK 0x03ff0000 +# define TV_CC_HOFF_SHIFT 16 +/** Sets the vertical position of the CC data. Usually 21 */ +# define TV_CC_LINE_MASK 0x0000003f +# define TV_CC_LINE_SHIFT 0 +/** @} */ + +/** @defgroup TV_CC_DATA + * @{ + */ +#define TV_CC_DATA 0x68094 +# define TV_CC_RDY (1 << 31) +/** Second word of CC data to be transmitted. */ +# define TV_CC_DATA_2_MASK 0x007f0000 +# define TV_CC_DATA_2_SHIFT 16 +/** First word of CC data to be transmitted. */ +# define TV_CC_DATA_1_MASK 0x0000007f +# define TV_CC_DATA_1_SHIFT 0 +/** @} + */ + +/** @{ */ +#define TV_H_LUMA_0 0x68100 +#define TV_H_LUMA_59 0x681ec +#define TV_H_CHROMA_0 0x68200 +#define TV_H_CHROMA_59 0x682ec +#define TV_V_LUMA_0 0x68300 +#define TV_V_LUMA_42 0x683a8 +#define TV_V_CHROMA_0 0x68400 +#define TV_V_CHROMA_42 0x684a8 +/** @} */ + +#define PIPEA_DSL 0x70000 + +#define PIPEACONF 0x70008 +#define PIPEACONF_ENABLE (1<<31) +#define PIPEACONF_DISABLE 0 +#define PIPEACONF_DOUBLE_WIDE (1<<30) +#define I965_PIPECONF_ACTIVE (1<<30) +#define PIPEACONF_SINGLE_WIDE 0 +#define PIPEACONF_PIPE_UNLOCKED 0 +#define PIPEACONF_PIPE_LOCKED (1<<25) +#define PIPEACONF_PALETTE 0 +#define PIPEACONF_GAMMA (1<<24) +/* IGDNG: gamma */ +#define PIPECONF_PALETTE_8BIT (0<<24) +#define PIPECONF_PALETTE_10BIT (1<<24) +#define PIPECONF_PALETTE_12BIT (2<<24) +#define PIPECONF_FORCE_BORDER (1<<25) +#define PIPECONF_PROGRESSIVE (0 << 21) +#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) +#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) +/* IGDNG */ +#define PIPECONF_MSA_TIMING_DELAY (0<<18) /* for eDP */ +#define PIPECONF_NO_DYNAMIC_RATE_CHANGE (0 << 16) +#define PIPECONF_NO_ROTATION (0<<14) +#define PIPECONF_FULL_COLOR_RANGE (0<<13) +#define PIPECONF_CE_COLOR_RANGE (1<<13) +#define PIPECONF_COLOR_SPACE_RGB (0<<11) +#define PIPECONF_COLOR_SPACE_YUV601 (1<<11) +#define PIPECONF_COLOR_SPACE_YUV709 (2<<11) +#define PIPECONF_CONNECT_DEFAULT (0<<9) +#define PIPECONF_8BPP (0<<5) +#define PIPECONF_10BPP (1<<5) +#define PIPECONF_6BPP (2<<5) +#define PIPECONF_12BPP (3<<5) +#define PIPECONF_ENABLE_DITHER (1<<4) +#define PIPECONF_DITHER_SPATIAL (0<<2) +#define PIPECONF_DITHER_ST1 (1<<2) +#define PIPECONF_DITHER_ST2 (2<<2) +#define PIPECONF_DITHER_TEMPORAL (3<<2) + +#define PIPEAGCMAXRED 0x70010 +#define PIPEAGCMAXGREEN 0x70014 +#define PIPEAGCMAXBLUE 0x70018 +#define PIPEASTAT 0x70024 +# define FIFO_UNDERRUN (1 << 31) +# define CRC_ERROR_ENABLE (1 << 29) +# define CRC_DONE_ENABLE (1 << 28) +# define GMBUS_EVENT_ENABLE (1 << 27) +# define VSYNC_INT_ENABLE (1 << 25) +# define DLINE_COMPARE_ENABLE (1 << 24) +# define DPST_EVENT_ENABLE (1 << 23) +# define LBLC_EVENT_ENABLE (1 << 22) +# define OFIELD_INT_ENABLE (1 << 21) +# define EFIELD_INT_ENABLE (1 << 20) +# define SVBLANK_INT_ENABLE (1 << 18) +# define VBLANK_INT_ENABLE (1 << 17) +# define OREG_UPDATE_ENABLE (1 << 16) +# define CRC_ERROR_INT_STATUS (1 << 13) +# define CRC_DONE_INT_STATUS (1 << 12) +# define GMBUS_INT_STATUS (1 << 11) +# define VSYNC_INT_STATUS (1 << 9) +# define DLINE_COMPARE_STATUS (1 << 8) +# define DPST_EVENT_STATUS (1 << 7) +# define LBLC_EVENT_STATUS (1 << 6) +# define OFIELD_INT_STATUS (1 << 5) +# define EFIELD_INT_STATUS (1 << 4) +# define SVBLANK_INT_STATUS (1 << 2) +# define VBLANK_INT_STATUS (1 << 1) +# define OREG_UPDATE_STATUS (1 << 0) + + +#define DSPARB 0x70030 +#define DSPARB_CSTART_SHIFT 7 +#define DSPARB_BSTART_SHIFT 0 +#define DSPARB_BEND_SHIFT 9 /* on 855 */ +#define DSPARB_AEND_SHIFT 0 +#define DSPFW1 0x70034 +#define DSPFW2 0x70038 +#define DSPFW3 0x7003c +/* + * The two pipe frame counter registers are not synchronized, so + * reading a stable value is somewhat tricky. The following code + * should work: + * + * do { + * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> PIPE_FRAME_HIGH_SHIFT; + * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >> PIPE_FRAME_LOW_SHIFT); + * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> PIPE_FRAME_HIGH_SHIFT); + * } while (high1 != high2); + * frame = (high1 << 8) | low1; + */ +#define PIPEAFRAMEHIGH 0x70040 +#define PIPE_FRAME_HIGH_MASK 0x0000ffff +#define PIPE_FRAME_HIGH_SHIFT 0 +#define PIPEAFRAMEPIXEL 0x70044 +#define PIPE_FRAME_LOW_MASK 0xff000000 +#define PIPE_FRAME_LOW_SHIFT 24 +/* + * Pixel within the current frame is counted in the PIPEAFRAMEPIXEL register + * and is 24 bits wide. + */ +#define PIPE_PIXEL_MASK 0x00ffffff +#define PIPE_PIXEL_SHIFT 0 + +/* + * Computing GMCH M and N values. + * + * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes + * + * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz) + * + * The GMCH value is used internally + */ +#define PIPEA_GMCH_DATA_M 0x70050 + +/* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */ +#define PIPE_GMCH_DATA_M_TU_SIZE_MASK (0x3f << 25) +#define PIPE_GMCH_DATA_M_TU_SIZE_SHIFT 25 + +#define PIPE_GMCH_DATA_M_MASK (0xffffff) + +#define PIPEA_GMCH_DATA_N 0x70054 +#define PIPE_GMCH_DATA_N_MASK (0xffffff) + +/* + * Computing Link M and N values. + * + * Link M / N = pixel_clock / ls_clk + * + * (the DP spec calls pixel_clock the 'strm_clk') + * + * The Link value is transmitted in the Main Stream + * Attributes and VB-ID. + */ + +#define PIPEA_DP_LINK_M 0x70060 +#define PIPEA_DP_LINK_M_MASK (0xffffff) + +#define PIPEA_DP_LINK_N 0x70064 +#define PIPEA_DP_LINK_N_MASK (0xffffff) + +#define PIPEB_DSL 0x71000 + +#define PIPEBCONF 0x71008 +#define PIPEBCONF_ENABLE (1<<31) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_DOUBLE_WIDE (1<<30) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_GAMMA (1<<24) +#define PIPEBCONF_PALETTE 0 + +#define PIPEBGCMAXRED 0x71010 +#define PIPEBGCMAXGREEN 0x71014 +#define PIPEBGCMAXBLUE 0x71018 +#define PIPEBSTAT 0x71024 +#define PIPEBFRAMEHIGH 0x71040 +#define PIPEBFRAMEPIXEL 0x71044 + +#define PIPEB_GMCH_DATA_M 0x71050 +#define PIPEB_GMCH_DATA_N 0x71054 +#define PIPEB_DP_LINK_M 0x71060 +#define PIPEB_DP_LINK_N 0x71064 + +#define DSPACNTR 0x70180 +#define DSPBCNTR 0x71180 +#define DISPLAY_PLANE_ENABLE (1<<31) +#define DISPLAY_PLANE_DISABLE 0 +#define DISPLAY_PLANE_TILED (1<<10) +#define DISPPLANE_GAMMA_ENABLE (1<<30) +#define DISPPLANE_GAMMA_DISABLE 0 +#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) +#define DISPPLANE_8BPP (0x2<<26) +#define DISPPLANE_15_16BPP (0x4<<26) +#define DISPPLANE_16BPP (0x5<<26) +#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) /* IGDNG: BGRX */ +#define DISPPLANE_32BPP (0x7<<26) /* IGDNG: not support */ +/* IGDNG */ +#define DISPPLANE_32BPP_10 (0x8<<26) /* 2:10:10:10 */ +#define DISPPLANE_32BPP_BGRX (0xa<<26) +#define DISPPLANE_64BPP (0xc<<26) +#define DISPPLANE_32BPP_RGBX (0xe<<26) +#define DISPPLANE_STEREO_ENABLE (1<<25) +#define DISPPLANE_STEREO_DISABLE 0 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) +#define DISPPLANE_SEL_PIPE_A 0 /* IGDNG: don't use */ +#define DISPPLANE_SEL_PIPE_B (1<<24) +#define DISPPLANE_NORMAL_RANGE (0<<25) +#define DISPPLANE_EXT_RANGE (1<<25) +/* IGDNG */ +#define DISPPLANE_CSC_BYPASS (0<<24) +#define DISPPLANE_CSC_PASSTHROUGH (1<<24) +#define DISPPLANE_SRC_KEY_ENABLE (1<<22) +#define DISPPLANE_SRC_KEY_DISABLE 0 +#define DISPPLANE_LINE_DOUBLE (1<<20) +#define DISPPLANE_NO_LINE_DOUBLE 0 +#define DISPPLANE_STEREO_POLARITY_FIRST 0 +#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) +/* plane B only */ +#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) +#define DISPPLANE_ALPHA_TRANS_DISABLE 0 +#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 +#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) +/* IGDNG */ +#define DISPPLANE_X_TILE (1<<10) +#define DISPPLANE_LINEAR (0<<10) + +#define DSPABASE 0x70184 +/* IGDNG */ +#define DSPALINOFF 0x70184 +#define DSPASTRIDE 0x70188 + +#define DSPBBASE 0x71184 +/* IGDNG */ +#define DSPBLINOFF 0x71184 +#define DSPBADDR DSPBBASE +#define DSPBSTRIDE 0x71188 + +#define DSPAKEYVAL 0x70194 +#define DSPAKEYMASK 0x70198 + +#define DSPAPOS 0x7018C /* reserved */ +#define DSPASIZE 0x70190 +#define DSPBPOS 0x7118C +#define DSPBSIZE 0x71190 + +#define DSPASURF 0x7019C +#define DSPATILEOFF 0x701A4 + +#define DSPBSURF 0x7119C +#define DSPBTILEOFF 0x711A4 + +#define VGACNTRL 0x71400 +# define VGA_DISP_DISABLE (1 << 31) +# define VGA_2X_MODE (1 << 30) +# define VGA_PIPE_B_SELECT (1 << 29) + +/* Various masks for reserved bits, etc. */ +#define I830_FWATER1_MASK (~((1<<11)|(1<<10)|(1<<9)| \ + (1<<8)|(1<<26)|(1<<25)|(1<<24)|(1<<5)|(1<<4)|(1<<3)| \ + (1<<2)|(1<<1)|1|(1<<20)|(1<<19)|(1<<18)|(1<<17)|(1<<16))) +#define I830_FWATER2_MASK ~(0) + +#define DV0A_RESERVED ((1<<26)|(1<<25)|(1<<24)|(1<<23)|(1<<22)|(1<<21)|(1<<20)|(1<<19)|(1<<18)|(1<<16)|(1<<5)|(1<<1)|1) +#define DV0B_RESERVED ((1<<27)|(1<<26)|(1<<25)|(1<<24)|(1<<23)|(1<<22)|(1<<21)|(1<<20)|(1<<19)|(1<<18)|(1<<16)|(1<<5)|(1<<1)|1) +#define VGA0_N_DIVISOR_MASK ((1<<21)|(1<<20)|(1<<19)|(1<<18)|(1<<17)|(1<<16)) +#define VGA0_M1_DIVISOR_MASK ((1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8)) +#define VGA0_M2_DIVISOR_MASK ((1<<5)|(1<<4)|(1<<3)|(1<<2)|(1<<1)|1) +#define VGA0_M1M2N_RESERVED ~(VGA0_N_DIVISOR_MASK|VGA0_M1_DIVISOR_MASK|VGA0_M2_DIVISOR_MASK) +#define VGA0_POSTDIV_MASK ((1<<7)|(1<<5)|(1<<4)|(1<<3)|(1<<2)|(1<<1)|1) +#define VGA1_POSTDIV_MASK ((1<<15)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8)) +#define VGA_POSTDIV_RESERVED ~(VGA0_POSTDIV_MASK|VGA1_POSTDIV_MASK|(1<<7)|(1<<15)) +#define DPLLA_POSTDIV_MASK ((1<<23)|(1<<21)|(1<<20)|(1<<19)|(1<<18)|(1<<17)|(1<<16)) +#define DPLLA_RESERVED ((1<<27)|(1<<26)|(1<<25)|(1<<24)|(1<<22)|(1<<15)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8)|(1<<7)|(1<<6)|(1<<5)|(1<<4)|(1<<3)|(1<<2)|(1<<1)|1) +#define ADPA_RESERVED ((1<<2)|(1<<1)|1|(1<<9)|(1<<8)|(1<<7)|(1<<6)|(1<<5)|(1<<30)|(1<<29)|(1<<28)|(1<<27)|(1<<26)|(1<<25)|(1<<24)|(1<<23)|(1<<22)|(1<<21)|(1<<20)|(1<<19)|(1<<18)|(1<<17)|(1<<16)) +#define SUPER_WORD 32 +#define BURST_A_MASK ((1<<11)|(1<<10)|(1<<9)|(1<<8)) +#define BURST_B_MASK ((1<<26)|(1<<25)|(1<<24)) +#define WATER_A_MASK ((1<<5)|(1<<4)|(1<<3)|(1<<2)|(1<<1)|1) +#define WATER_B_MASK ((1<<20)|(1<<19)|(1<<18)|(1<<17)|(1<<16)) +#define WATER_RESERVED ((1<<31)|(1<<30)|(1<<29)|(1<<28)|(1<<27)|(1<<23)|(1<<22)|(1<<21)|(1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<7)|(1<<6)) +#define PIPEACONF_RESERVED ((1<<29)|(1<<28)|(1<<27)|(1<<23)|(1<<22)|(1<<21)|(1<<20)|(1<<19)|(1<<18)|(1<<17)|(1<<16)|0xffff) +#define PIPEBCONF_RESERVED ((1<<30)|(1<<29)|(1<<28)|(1<<27)|(1<<26)|(1<<25)|(1<<23)|(1<<22)|(1<<21)|(1<<20)|(1<<19)|(1<<18)|(1<<17)|(1<<16)|0xffff) +#define DSPACNTR_RESERVED ((1<<23)|(1<<19)|(1<<17)|(1<<16)|0xffff) +#define DSPBCNTR_RESERVED ((1<<23)|(1<<19)|(1<<17)|(1<<16)|0x7ffe) + +#define I830_GMCH_CTRL 0x52 + +#define I830_GMCH_ENABLED 0x4 +#define I830_GMCH_MEM_MASK 0x1 +#define I830_GMCH_MEM_64M 0x1 +#define I830_GMCH_MEM_128M 0 + +#define I830_GMCH_GMS_MASK 0x70 +#define I830_GMCH_GMS_DISABLED 0x00 +#define I830_GMCH_GMS_LOCAL 0x10 +#define I830_GMCH_GMS_STOLEN_512 0x20 +#define I830_GMCH_GMS_STOLEN_1024 0x30 +#define I830_GMCH_GMS_STOLEN_8192 0x40 + +#define I830_RDRAM_CHANNEL_TYPE 0x03010 +#define I830_RDRAM_ND(x) (((x) & 0x20) >> 5) +#define I830_RDRAM_DDT(x) (((x) & 0x18) >> 3) + +#define I855_GMCH_GMS_MASK (0xF << 4) +#define I855_GMCH_GMS_DISABLED 0x00 +#define I855_GMCH_GMS_STOLEN_1M (0x1 << 4) +#define I855_GMCH_GMS_STOLEN_4M (0x2 << 4) +#define I855_GMCH_GMS_STOLEN_8M (0x3 << 4) +#define I855_GMCH_GMS_STOLEN_16M (0x4 << 4) +#define I855_GMCH_GMS_STOLEN_32M (0x5 << 4) +#define I915G_GMCH_GMS_STOLEN_48M (0x6 << 4) +#define I915G_GMCH_GMS_STOLEN_64M (0x7 << 4) +#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4) +#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4) +#define INTEL_GMCH_GMS_STOLEN_96M (0xa << 4) +#define INTEL_GMCH_GMS_STOLEN_160M (0xb << 4) +#define INTEL_GMCH_GMS_STOLEN_224M (0xc << 4) +#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4) + + +#define I915_GCFGC 0xf0 +#define I915_LOW_FREQUENCY_ENABLE (1 << 7) +#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) +#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) +#define I915_DISPLAY_CLOCK_MASK (7 << 4) + +#define I855_HPLLCC 0xc0 +#define I855_CLOCK_CONTROL_MASK (3 << 0) +#define I855_CLOCK_133_200 (0 << 0) +#define I855_CLOCK_100_200 (1 << 0) +#define I855_CLOCK_100_133 (2 << 0) +#define I855_CLOCK_166_250 (3 << 0) + +/* BLT commands */ +#define COLOR_BLT_CMD ((2<<29)|(0x40<<22)|(0x3)) +#define COLOR_BLT_WRITE_ALPHA (1<<21) +#define COLOR_BLT_WRITE_RGB (1<<20) + +#define XY_COLOR_BLT_CMD ((2<<29)|(0x50<<22)|(0x4)) +#define XY_COLOR_BLT_WRITE_ALPHA (1<<21) +#define XY_COLOR_BLT_WRITE_RGB (1<<20) +#define XY_COLOR_BLT_TILED (1<<11) + +#define XY_SETUP_CLIP_BLT_CMD ((2<<29)|(3<<22)|1) + +#define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) +#define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) +#define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) +#define XY_SRC_COPY_BLT_SRC_TILED (1<<15) +#define XY_SRC_COPY_BLT_DST_TILED (1<<11) + +#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|0x4) +#define SRC_COPY_BLT_WRITE_ALPHA (1<<21) +#define SRC_COPY_BLT_WRITE_RGB (1<<20) + +#define XY_PAT_BLT_IMMEDIATE ((2<<29)|(0x72<<22)) + +#define XY_MONO_PAT_BLT_CMD ((0x2<<29)|(0x52<<22)|0x7) +#define XY_MONO_PAT_VERT_SEED ((1<<10)|(1<<9)|(1<<8)) +#define XY_MONO_PAT_HORT_SEED ((1<<14)|(1<<13)|(1<<12)) +#define XY_MONO_PAT_BLT_WRITE_ALPHA (1<<21) +#define XY_MONO_PAT_BLT_WRITE_RGB (1<<20) + +#define XY_MONO_SRC_BLT_CMD ((0x2<<29)|(0x54<<22)|(0x6)) +#define XY_MONO_SRC_BLT_WRITE_ALPHA (1<<21) +#define XY_MONO_SRC_BLT_WRITE_RGB (1<<20) + +#define STATE3D_FOG_MODE ((3<<29)|(0x1d<<24)|(0x89<<16)|2) +#define FOG_MODE_VERTEX (1<<31) + +#define DISABLE_TEX_TRANSFORM (1<<28) +#define TEXTURE_SET(x) (x<<29) + +#define STATE3D_VERTEX_TRANSFORM ((3<<29)|(0x1d<<24)|(0x8b<<16)) +#define DISABLE_VIEWPORT_TRANSFORM (1<<31) +#define DISABLE_PERSPECTIVE_DIVIDE (1<<29) + +#define MI_SET_CONTEXT (0x18<<23) +#define CTXT_NO_RESTORE (1) +#define CTXT_PALETTE_SAVE_DISABLE (1<<3) +#define CTXT_PALETTE_RESTORE_DISABLE (1<<2) + +/* Dword 0 */ +#define MI_VERTEX_BUFFER (0x17<<23) +#define MI_VERTEX_BUFFER_IDX(x) (x<<20) +#define MI_VERTEX_BUFFER_PITCH(x) (x<<13) +#define MI_VERTEX_BUFFER_WIDTH(x) (x<<6) +/* Dword 1 */ +#define MI_VERTEX_BUFFER_DISABLE (1) + +/* Overlay Flip */ +#define MI_OVERLAY_FLIP (0x11<<23) +#define MI_OVERLAY_FLIP_CONTINUE (0<<21) +#define MI_OVERLAY_FLIP_ON (1<<21) +#define MI_OVERLAY_FLIP_OFF (2<<21) + +/* Wait for Events */ +#define MI_WAIT_FOR_EVENT (0x03<<23) +#define MI_WAIT_FOR_PIPEB_SVBLANK (1<<18) +#define MI_WAIT_FOR_PIPEA_SVBLANK (1<<17) +#define MI_WAIT_FOR_OVERLAY_FLIP (1<<16) +#define MI_WAIT_FOR_PIPEB_VBLANK (1<<7) +#define MI_WAIT_FOR_PIPEB_SCAN_LINE_WINDOW (1<<5) +#define MI_WAIT_FOR_PIPEA_VBLANK (1<<3) +#define MI_WAIT_FOR_PIPEA_SCAN_LINE_WINDOW (1<<1) + +/* Set the scan line for MI_WAIT_FOR_PIPE?_SCAN_LINE_WINDOW */ +#define MI_LOAD_SCAN_LINES_INCL (0x12<<23) +#define MI_LOAD_SCAN_LINES_DISPLAY_PIPEA (0) +#define MI_LOAD_SCAN_LINES_DISPLAY_PIPEB (0x1<<20) + +/* Flush */ +#define MI_FLUSH (0x04<<23) +#define MI_WRITE_DIRTY_STATE (1<<4) +#define MI_END_SCENE (1<<3) +#define MI_GLOBAL_SNAPSHOT_COUNT_RESET (1<<3) +#define MI_INHIBIT_RENDER_CACHE_FLUSH (1<<2) +#define MI_STATE_INSTRUCTION_CACHE_FLUSH (1<<1) +#define MI_INVALIDATE_MAP_CACHE (1<<0) +/* broadwater flush bits */ +#define BRW_MI_GLOBAL_SNAPSHOT_RESET (1 << 3) + +/* Noop */ +#define MI_NOOP 0x00 +#define MI_NOOP_WRITE_ID (1<<22) +#define MI_NOOP_ID_MASK (1<<22 - 1) + +#define STATE3D_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x01<<16)) + +/* Batch */ +#define MI_BATCH_BUFFER ((0x30 << 23) | 1) +#define MI_BATCH_BUFFER_START (0x31 << 23) +#define MI_BATCH_BUFFER_END (0xA << 23) +#define MI_BATCH_NON_SECURE (1) +#define MI_BATCH_NON_SECURE_I965 (1 << 8) + +/* STATE3D_FOG_MODE stuff */ +#define ENABLE_FOG_SOURCE (1<<27) +#define ENABLE_FOG_CONST (1<<24) +#define ENABLE_FOG_DENSITY (1<<23) + +#define MAX_DISPLAY_PIPES 2 + +typedef enum { + CrtIndex = 0, + TvIndex, + DfpIndex, + LfpIndex, + Crt2Index, + Tv2Index, + Dfp2Index, + Lfp2Index, + NumDisplayTypes +} DisplayType; + +/* What's connected to the pipes (as reported by the BIOS) */ +#define PIPE_ACTIVE_MASK 0xff +#define PIPE_CRT_ACTIVE (1 << CrtIndex) +#define PIPE_TV_ACTIVE (1 << TvIndex) +#define PIPE_DFP_ACTIVE (1 << DfpIndex) +#define PIPE_LCD_ACTIVE (1 << LfpIndex) +#define PIPE_CRT2_ACTIVE (1 << Crt2Index) +#define PIPE_TV2_ACTIVE (1 << Tv2Index) +#define PIPE_DFP2_ACTIVE (1 << Dfp2Index) +#define PIPE_LCD2_ACTIVE (1 << Lfp2Index) + +#define PIPE_SIZED_DISP_MASK (PIPE_DFP_ACTIVE | \ + PIPE_LCD_ACTIVE | \ + PIPE_DFP2_ACTIVE) + +#define PIPE_A_SHIFT 0 +#define PIPE_B_SHIFT 8 +#define PIPE_SHIFT(n) ((n) == 0 ? \ + PIPE_A_SHIFT : PIPE_B_SHIFT) + +/* + * Some BIOS scratch area registers. The 845 (and 830?) store the amount + * of video memory available to the BIOS in SWF1. + */ + +#define SWF0 0x71410 +#define SWF1 0x71414 +#define SWF2 0x71418 +#define SWF3 0x7141c +#define SWF4 0x71420 +#define SWF5 0x71424 +#define SWF6 0x71428 + +/* + * 855 scratch registers. + */ +#define SWF00 0x70410 +#define SWF01 0x70414 +#define SWF02 0x70418 +#define SWF03 0x7041c +#define SWF04 0x70420 +#define SWF05 0x70424 +#define SWF06 0x70428 + +#define SWF10 SWF0 +#define SWF11 SWF1 +#define SWF12 SWF2 +#define SWF13 SWF3 +#define SWF14 SWF4 +#define SWF15 SWF5 +#define SWF16 SWF6 + +#define SWF30 0x72414 +#define SWF31 0x72418 +#define SWF32 0x7241c + +/* + * Overlay registers. These are overlay registers accessed via MMIO. + * Those loaded via the overlay register page are defined in i830_video.c. + */ +#define OVADD 0x30000 + +#define DOVSTA 0x30008 +#define OC_BUF (0x3<<20) + +#define OGAMC5 0x30010 +#define OGAMC4 0x30014 +#define OGAMC3 0x30018 +#define OGAMC2 0x3001c +#define OGAMC1 0x30020 +#define OGAMC0 0x30024 + + +/* + * Palette registers + */ +#define PALETTE_A 0x0a000 +#define PALETTE_B 0x0a800 + +/* Framebuffer compression */ +#define FBC_CFB_BASE 0x03200 /* 4k page aligned */ +#define FBC_LL_BASE 0x03204 /* 4k page aligned */ +#define FBC_CONTROL 0x03208 +#define FBC_CTL_EN (1<<31) +#define FBC_CTL_PERIODIC (1<<30) +#define FBC_CTL_INTERVAL_SHIFT (16) +#define FBC_CTL_UNCOMPRESSIBLE (1<<14) +#define FBC_CTL_STRIDE_SHIFT (5) +#define FBC_CTL_FENCENO (1<<0) +#define FBC_COMMAND 0x0320c +#define FBC_CMD_COMPRESS (1<<0) +#define FBC_STATUS 0x03210 +#define FBC_STAT_COMPRESSING (1<<31) +#define FBC_STAT_COMPRESSED (1<<30) +#define FBC_STAT_MODIFIED (1<<29) +#define FBC_STAT_CURRENT_LINE (1<<0) +#define FBC_CONTROL2 0x03214 +#define FBC_CTL_FENCE_DBL (0<<4) +#define FBC_CTL_IDLE_IMM (0<<2) +#define FBC_CTL_IDLE_FULL (1<<2) +#define FBC_CTL_IDLE_LINE (2<<2) +#define FBC_CTL_IDLE_DEBUG (3<<2) +#define FBC_CTL_CPU_FENCE (1<<1) +#define FBC_CTL_PLANEA (0<<0) +#define FBC_CTL_PLANEB (1<<0) +#define FBC_FENCE_OFF 0x0321b +#define FBC_MOD_NUM 0x03220 +#define FBC_TAG_DEBUG 0x03300 + +#define FBC_LL_SIZE (1536) +#define FBC_LL_PAD (32) + +/* Framebuffer compression version 2 */ +#define DPFC_CB_BASE 0x3200 +#define DPFC_CONTROL 0x3208 +#define DPFC_CTL_EN (1<<31) +#define DPFC_CTL_PLANEA (0<<30) +#define DPFC_CTL_PLANEB (1<<30) +#define DPFC_CTL_FENCE_EN (1<<29) +#define DPFC_CTL_LIMIT_1X (0<<6) +#define DPFC_CTL_LIMIT_2X (1<<6) +#define DPFC_CTL_LIMIT_4X (2<<6) +#define DPFC_RECOMP_CTL 0x320c +#define DPFC_RECOMP_STALL_EN (1<<27) +#define DPFC_RECOMP_STALL_WM_SHIFT (16) +#define DPFC_RECOMP_STALL_WM_MASK (0x07ff0000) +#define DPFC_RECOMP_TIMER_COUNT_SHIFT (0) +#define DPFC_RECOMP_TIMER_COUNT_MASK (0x0000003f) +#define DPFC_STATUS 0x3210 +#define DPFC_INVAL_SEG_SHIFT (16) +#define DPFC_INVAL_SEG_MASK (0x07ff0000) +#define DPFC_COMP_SEG_SHIFT (0) +#define DPFC_COMP_SEG_MASK (0x000003ff) +#define DPFC_STATUS2 0x3214 +#define DPFC_FENCE_YOFF 0x3218 + +#define PEG_BAND_GAP_DATA 0x14d68 + +#define MCHBAR_RENDER_STANDBY 0x111B8 +#define RENDER_STANDBY_ENABLE (1 << 30) + +/* IGDNG */ + +/* warmup time in us */ +#define WARMUP_PCH_REF_CLK_SSC_MOD 1 +#define WARMUP_PCH_FDI_RECEIVER_PLL 25 +#define WARMUP_PCH_DPLL 50 +#define WARMUP_CPU_DP_PLL 20 +#define WARMUP_CPU_FDI_TRANSMITTER_PLL 10 +#define WARMUP_DMI_LATENCY 20 +#define FDI_TRAIN_PATTERN_1_TIME 0.5 +#define FDI_TRAIN_PATTERN_2_TIME 1.5 +#define FDI_ONE_IDLE_PATTERN_TIME 31 + +#define CPU_VGACNTRL 0x41000 + +#define DIGITAL_PORT_HOTPLUG_CNTRL 0x44030 +#define DIGITAL_PORTA_HOTPLUG_ENABLE (1 << 4) +#define DIGITAL_PORTA_SHORT_PULSE_2MS (0 << 2) +#define DIGITAL_PORTA_SHORT_PULSE_4_5MS (1 << 2) +#define DIGITAL_PORTA_SHORT_PULSE_6MS (2 << 2) +#define DIGITAL_PORTA_SHORT_PULSE_100MS (3 << 2) +#define DIGITAL_PORTA_NO_DETECT (0 << 0) +#define DIGITAL_PORTA_LONG_PULSE_DETECT_MASK (1 << 1) +#define DIGITAL_PORTA_SHORT_PULSE_DETECT_MASK (1 << 0) + +/* refresh rate hardware control */ +#define RR_HW_CTL 0x45300 +#define RR_HW_LOW_POWER_FRAMES_MASK 0xff +#define RR_HW_HIGH_POWER_FRAMES_MASK 0xff00 + +#define FDI_PLL_BIOS_0 0x46000 +#define FDI_PLL_BIOS_1 0x46004 +#define FDI_PLL_BIOS_2 0x46008 +#define DISPLAY_PORT_PLL_BIOS_0 0x4600c +#define DISPLAY_PORT_PLL_BIOS_1 0x46010 +#define DISPLAY_PORT_PLL_BIOS_2 0x46014 + +#define FDI_PLL_FREQ_CTL 0x46030 +#define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24) +#define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00 +#define FDI_PLL_FREQ_DISABLE_COUNT_LIMIT_MASK 0xff + +#define PIPEA_DATA_M1 0x60030 +#define TU_SIZE(x) (((x)-1) << 25) /* default size 64 */ +#define TU_SIZE_MASK 0x7e000000 +#define PIPEA_DATA_M1_OFFSET 0 +#define PIPEA_DATA_N1 0x60034 +#define PIPEA_DATA_N1_OFFSET 0 + +#define PIPEA_DATA_M2 0x60038 +#define PIPEA_DATA_M2_OFFSET 0 +#define PIPEA_DATA_N2 0x6003c +#define PIPEA_DATA_N2_OFFSET 0 + +#define PIPEA_LINK_M1 0x60040 +#define PIPEA_LINK_M1_OFFSET 0 +#define PIPEA_LINK_N1 0x60044 +#define PIPEA_LINK_N1_OFFSET 0 + +#define PIPEA_LINK_M2 0x60048 +#define PIPEA_LINK_M2_OFFSET 0 +#define PIPEA_LINK_N2 0x6004c +#define PIPEA_LINK_N2_OFFSET 0 + +/* PIPEB timing regs are same start from 0x61000 */ + +#define PIPEB_DATA_M1 0x61030 +#define PIPEB_DATA_M1_OFFSET 0 +#define PIPEB_DATA_N1 0x61034 +#define PIPEB_DATA_N1_OFFSET 0 + +#define PIPEB_DATA_M2 0x61038 +#define PIPEB_DATA_M2_OFFSET 0 +#define PIPEB_DATA_N2 0x6103c +#define PIPEB_DATA_N2_OFFSET 0 + +#define PIPEB_LINK_M1 0x61040 +#define PIPEB_LINK_M1_OFFSET 0 +#define PIPEB_LINK_N1 0x61044 +#define PIPEB_LINK_N1_OFFSET 0 + +#define PIPEB_LINK_M2 0x61048 +#define PIPEB_LINK_M2_OFFSET 0 +#define PIPEB_LINK_N2 0x6104c +#define PIPEB_LINK_N2_OFFSET 0 + +/* PIPECONF for pipe A/B addr is same */ + +/* cusor A is only connected to pipe A, + cursor B is connected to pipe B. Otherwise no change. */ + +/* Plane A/B, DSPACNTR/DSPBCNTR addr not changed */ + +/* CPU panel fitter */ +#define PFA_CTL_1 0x68080 +#define PFB_CTL_1 0x68880 +#define PF_ENABLE (1<<31) + +#define PFA_WIN_POS 0x68070 +#define PFB_WIN_POS 0x68870 +#define PFA_WIN_SIZE 0x68074 +#define PFB_WIN_SIZE 0x68874 + +/* legacy palette */ +#define LGC_PALETTE_A 0x4a000 +#define LGC_PALETTE_B 0x4a800 + +/* interrupts */ +#define DE_MASTER_IRQ_CONTROL (1 << 31) +#define DE_SPRITEB_FLIP_DONE (1 << 29) +#define DE_SPRITEA_FLIP_DONE (1 << 28) +#define DE_PLANEB_FLIP_DONE (1 << 27) +#define DE_PLANEA_FLIP_DONE (1 << 26) +#define DE_PCU_EVENT (1 << 25) +#define DE_GTT_FAULT (1 << 24) +#define DE_POISON (1 << 23) +#define DE_PERFORM_COUNTER (1 << 22) +#define DE_PCH_EVENT (1 << 21) +#define DE_AUX_CHANNEL_A (1 << 20) +#define DE_DP_A_HOTPLUG (1 << 19) +#define DE_GSE (1 << 18) +#define DE_PIPEB_VBLANK (1 << 15) +#define DE_PIPEB_EVEN_FIELD (1 << 14) +#define DE_PIPEB_ODD_FIELD (1 << 13) +#define DE_PIPEB_LINE_COMPARE (1 << 12) +#define DE_PIPEB_VSYNC (1 << 11) +#define DE_PIPEB_FIFO_UNDERRUN (1 << 8) +#define DE_PIPEA_VBLANK (1 << 7) +#define DE_PIPEA_EVEN_FIELD (1 << 6) +#define DE_PIPEA_ODD_FIELD (1 << 5) +#define DE_PIPEA_LINE_COMPARE (1 << 4) +#define DE_PIPEA_VSYNC (1 << 3) +#define DE_PIPEA_FIFO_UNDERRUN (1 << 0) + +#define DEISR 0x44000 +#define DEIMR 0x44004 +#define DEIIR 0x44008 +#define DEIER 0x4400c + +/* GT interrupt */ +#define GT_SYNC_STATUS (1 << 2) +#define GT_USER_INTERRUPT (1 << 0) + +#define GTISR 0x44010 +#define GTIMR 0x44014 +#define GTIIR 0x44018 +#define GTIER 0x4401c + +/* PCH */ + +/* south display engine interrupt */ +#define SDE_CRT_HOTPLUG (1 << 11) +#define SDE_PORTD_HOTPLUG (1 << 10) +#define SDE_PORTC_HOTPLUG (1 << 9) +#define SDE_PORTB_HOTPLUG (1 << 8) +#define SDE_SDVOB_HOTPLUG (1 << 6) + +#define SDEISR 0xc4000 +#define SDEIMR 0xc4004 +#define SDEIIR 0xc4008 +#define SDEIER 0xc400c + +/* digital port hotplug */ +#define PCH_PORT_HOTPLUG 0xc4030 +#define PORTD_HOTPLUG_ENABLE (1 << 20) +#define PORTD_PULSE_DURATION_2ms (0) +#define PORTD_PULSE_DURATION_4_5ms (1 << 18) +#define PORTD_PULSE_DURATION_6ms (2 << 18) +#define PORTD_PULSE_DURATION_100ms (3 << 18) +#define PORTD_HOTPLUG_NO_DETECT (0) +#define PORTD_HOTPLUG_SHORT_DETECT (1 << 16) +#define PORTD_HOTPLUG_LONG_DETECT (1 << 17) +#define PORTC_HOTPLUG_ENABLE (1 << 12) +#define PORTC_PULSE_DURATION_2ms (0) +#define PORTC_PULSE_DURATION_4_5ms (1 << 10) +#define PORTC_PULSE_DURATION_6ms (2 << 10) +#define PORTC_PULSE_DURATION_100ms (3 << 10) +#define PORTC_HOTPLUG_NO_DETECT (0) +#define PORTC_HOTPLUG_SHORT_DETECT (1 << 8) +#define PORTC_HOTPLUG_LONG_DETECT (1 << 9) +#define PORTB_HOTPLUG_ENABLE (1 << 4) +#define PORTB_PULSE_DURATION_2ms (0) +#define PORTB_PULSE_DURATION_4_5ms (1 << 2) +#define PORTB_PULSE_DURATION_6ms (2 << 2) +#define PORTB_PULSE_DURATION_100ms (3 << 2) +#define PORTB_HOTPLUG_NO_DETECT (0) +#define PORTB_HOTPLUG_SHORT_DETECT (1 << 0) +#define PORTB_HOTPLUG_LONG_DETECT (1 << 1) + +#define PCH_GPIOA 0xc5010 +#define PCH_GPIOB 0xc5014 +#define PCH_GPIOC 0xc5018 +#define PCH_GPIOD 0xc501c +#define PCH_GPIOE 0xc5020 +#define PCH_GPIOF 0xc5024 +#define PCH_GMBUS0 0xc5100 +#define PCH_GMBUS1 0xc5104 +#define PCH_GMBUS2 0xc5108 +#define PCH_GMBUS3 0xc510c +#define PCH_GMBUS4 0xc5110 +#define PCH_GMBUS5 0xc5120 + +#define PCH_DPLL_A 0xc6014 +#define PCH_DPLL_B 0xc6018 + +#define PCH_FPA0 0xc6040 +#define PCH_FPA1 0xc6044 +#define PCH_FPB0 0xc6048 +#define PCH_FPB1 0xc604c + +#define PCH_DPLL_TEST 0xc606c + +#define PCH_DREF_CONTROL 0xC6200 +#define DREF_CONTROL_MASK 0x7fc3 +#define DREF_CPU_SOURCE_OUTPUT_DISABLE (0<<13) +#define DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD (2<<13) +#define DREF_CPU_SOURCE_OUTPUT_NONSPREAD (3<<13) +#define DREF_SSC_SOURCE_DISABLE (0<<11) +#define DREF_SSC_SOURCE_ENABLE (2<<11) +#define DREF_NONSPREAD_SOURCE_DISABLE (0<<9) +#define DREF_NONSPREAD_SOURCE_ENABLE (2<<9) +#define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7) +#define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7) +#define DREF_SSC4_DOWNSPREAD (0<<6) +#define DREF_SSC4_CENTERSPREAD (1<<6) +#define DREF_SSC1_DISABLE (0<<1) +#define DREF_SSC1_ENABLE (1<<1) +#define DREF_SSC4_DISABLE (0) +#define DREF_SSC4_ENABLE (1) + +#define PCH_RAWCLK_FREQ 0xc6204 +#define FDL_TP1_TIMER_SHIFT 12 +#define FDL_TP1_TIMER_MASK (3<<12) +#define FDL_TP2_TIMER_SHIFT 10 +#define FDL_TP2_TIMER_MASK (3<<10) +#define RAWCLK_FREQ_MASK 0x3ff + +#define PCH_DPLL_TMR_CFG 0xc6208 + +#define PCH_SSC4_PARMS 0xc6210 +#define PCH_SSC4_AUX_PARMS 0xc6214 + +/* transcoder */ + +#define TRANS_HTOTAL_A 0xe0000 +#define TRANS_HTOTAL_SHIFT 16 +#define TRANS_HACTIVE_SHIFT 0 +#define TRANS_HBLANK_A 0xe0004 +#define TRANS_HBLANK_END_SHIFT 16 +#define TRANS_HBLANK_START_SHIFT 0 +#define TRANS_HSYNC_A 0xe0008 +#define TRANS_HSYNC_END_SHIFT 16 +#define TRANS_HSYNC_START_SHIFT 0 +#define TRANS_VTOTAL_A 0xe000c +#define TRANS_VTOTAL_SHIFT 16 +#define TRANS_VACTIVE_SHIFT 0 +#define TRANS_VBLANK_A 0xe0010 +#define TRANS_VBLANK_END_SHIFT 16 +#define TRANS_VBLANK_START_SHIFT 0 +#define TRANS_VSYNC_A 0xe0014 +#define TRANS_VSYNC_END_SHIFT 16 +#define TRANS_VSYNC_START_SHIFT 0 + +#define TRANSA_DATA_M1 0xe0030 +#define TRANSA_DATA_N1 0xe0034 +#define TRANSA_DATA_M2 0xe0038 +#define TRANSA_DATA_N2 0xe003c +#define TRANSA_DP_LINK_M1 0xe0040 +#define TRANSA_DP_LINK_N1 0xe0044 +#define TRANSA_DP_LINK_M2 0xe0048 +#define TRANSA_DP_LINK_N2 0xe004c + +#define TRANS_HTOTAL_B 0xe1000 +#define TRANS_HBLANK_B 0xe1004 +#define TRANS_HSYNC_B 0xe1008 +#define TRANS_VTOTAL_B 0xe100c +#define TRANS_VBLANK_B 0xe1010 +#define TRANS_VSYNC_B 0xe1014 + +#define TRANSB_DATA_M1 0xe1030 +#define TRANSB_DATA_N1 0xe1034 +#define TRANSB_DATA_M2 0xe1038 +#define TRANSB_DATA_N2 0xe103c +#define TRANSB_DP_LINK_M1 0xe1040 +#define TRANSB_DP_LINK_N1 0xe1044 +#define TRANSB_DP_LINK_M2 0xe1048 +#define TRANSB_DP_LINK_N2 0xe104c + +#define TRANSACONF 0xf0008 +#define TRANSBCONF 0xf1008 +#define TRANS_DISABLE (0<<31) +#define TRANS_ENABLE (1<<31) +#define TRANS_STATE_MASK (1<<30) +#define TRANS_STATE_DISABLE (0<<30) +#define TRANS_STATE_ENABLE (1<<30) +#define TRANS_FSYNC_DELAY_HB1 (0<<27) +#define TRANS_FSYNC_DELAY_HB2 (1<<27) +#define TRANS_FSYNC_DELAY_HB3 (2<<27) +#define TRANS_FSYNC_DELAY_HB4 (3<<27) +#define TRANS_DP_AUDIO_ONLY (1<<26) +#define TRANS_DP_VIDEO_AUDIO (0<<26) +#define TRANS_PROGRESSIVE (0<<21) +#define TRANS_8BPC (0<<5) +#define TRANS_10BPC (1<<5) +#define TRANS_6BPC (2<<5) +#define TRANS_12BPC (3<<5) + +#define FDI_RXA_CHICKEN 0xc200c +#define FDI_RXB_CHICKEN 0xc2010 +#define FDI_RX_PHASE_SYNC_POINTER_ENABLE (1) + +/* CPU: FDI_TX */ +#define FDI_TXA_CTL 0x60100 +#define FDI_TXB_CTL 0x61100 +#define FDI_TX_DISABLE (0<<31) +#define FDI_TX_ENABLE (1<<31) +#define FDI_LINK_TRAIN_PATTERN_1 (0<<28) +#define FDI_LINK_TRAIN_PATTERN_2 (1<<28) +#define FDI_LINK_TRAIN_PATTERN_IDLE (2<<28) +#define FDI_LINK_TRAIN_NONE (3<<28) +#define FDI_LINK_TRAIN_VOLTAGE_0_4V (0<<25) +#define FDI_LINK_TRAIN_VOLTAGE_0_6V (1<<25) +#define FDI_LINK_TRAIN_VOLTAGE_0_8V (2<<25) +#define FDI_LINK_TRAIN_VOLTAGE_1_2V (3<<25) +#define FDI_LINK_TRAIN_PRE_EMPHASIS_NONE (0<<22) +#define FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22) +#define FDI_LINK_TRAIN_PRE_EMPHASIS_2X (2<<22) +#define FDI_LINK_TRAIN_PRE_EMPHASIS_3X (3<<22) +#define FDI_DP_PORT_WIDTH_X1 (0<<19) +#define FDI_DP_PORT_WIDTH_X2 (1<<19) +#define FDI_DP_PORT_WIDTH_X3 (2<<19) +#define FDI_DP_PORT_WIDTH_X4 (3<<19) +#define FDI_TX_ENHANCE_FRAME_ENABLE (1<<18) +/* IGDNG: hardwired to 1 */ +#define FDI_TX_PLL_ENABLE (1<<14) +/* both Tx and Rx */ +#define FDI_SCRAMBLING_ENABLE (0<<7) +#define FDI_SCRAMBLING_DISABLE (1<<7) + +/* FDI_RX, FDI_X is hard-wired to Transcoder_X */ +#define FDI_RXA_CTL 0xf000c +#define FDI_RXB_CTL 0xf100c +#define FDI_RX_ENABLE (1<<31) +#define FDI_RX_DISABLE (0<<31) +/* train, dp width same as FDI_TX */ +#define FDI_DP_PORT_WIDTH_X8 (7<<19) +#define FDI_8BPC (0<<16) +#define FDI_10BPC (1<<16) +#define FDI_6BPC (2<<16) +#define FDI_12BPC (3<<16) +#define FDI_LINK_REVERSE_OVERWRITE (1<<15) +#define FDI_DMI_LINK_REVERSE_MASK (1<<14) +#define FDI_RX_PLL_ENABLE (1<<13) +#define FDI_FS_ERR_CORRECT_ENABLE (1<<11) +#define FDI_FE_ERR_CORRECT_ENABLE (1<<10) +#define FDI_FS_ERR_REPORT_ENABLE (1<<9) +#define FDI_FE_ERR_REPORT_ENABLE (1<<8) +#define FDI_RX_ENHANCE_FRAME_ENABLE (1<<6) +#define FDI_SEL_RAWCLK (0<<4) +#define FDI_SEL_PCDCLK (1<<4) + +#define FDI_RXA_MISC 0xf0010 +#define FDI_RXB_MISC 0xf1010 +#define FDI_RXA_TUSIZE1 0xf0030 +#define FDI_RXA_TUSIZE2 0xf0038 +#define FDI_RXB_TUSIZE1 0xf1030 +#define FDI_RXB_TUSIZE2 0xf1038 + +/* FDI_RX interrupt register format */ +#define FDI_RX_INTER_LANE_ALIGN (1<<10) +#define FDI_RX_SYMBOL_LOCK (1<<9) /* train 2 */ +#define FDI_RX_BIT_LOCK (1<<8) /* train 1 */ +#define FDI_RX_TRAIN_PATTERN_2_FAIL (1<<7) +#define FDI_RX_FS_CODE_ERR (1<<6) +#define FDI_RX_FE_CODE_ERR (1<<5) +#define FDI_RX_SYMBOL_ERR_RATE_ABOVE (1<<4) +#define FDI_RX_HDCP_LINK_FAIL (1<<3) +#define FDI_RX_PIXEL_FIFO_OVERFLOW (1<<2) +#define FDI_RX_CROSS_CLOCK_OVERFLOW (1<<1) +#define FDI_RX_SYMBOL_QUEUE_OVERFLOW (1<<0) + +#define FDI_RXA_IIR 0xf0014 +#define FDI_RXA_IMR 0xf0018 +#define FDI_RXB_IIR 0xf1014 +#define FDI_RXB_IMR 0xf1018 + +#define FDI_PLL_CTL_1 0xfe000 +#define FDI_PLL_CTL_2 0xfe004 + +/* CRT */ +#define PCH_ADPA 0xe1100 +#define ADPA_TRANS_SELECT_MASK (1<<30) +#define ADPA_TRANS_A_SELECT 0 +#define ADPA_TRANS_B_SELECT (1<<30) +/* HPD is here */ +#define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */ +#define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24) +#define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24) +#define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24) +#define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24) +#define ADPA_CRT_HOTPLUG_ENABLE (1<<23) +#define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22) +#define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22) +#define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21) +#define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21) +#define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20) +#define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20) +#define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18) +#define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18) +#define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18) +#define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18) +#define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17) +#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17) +#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) +/* polarity control not changed */ + +/* or SDVOB */ +#define HDMIB 0xe1140 +#define PORT_ENABLE (1 << 31) +#define TRANSCODER_A (0) +#define TRANSCODER_B (1 << 30) +#define COLOR_FORMAT_8bpc (0) +#define COLOR_FORMAT_12bpc (3 << 26) +#define SDVOB_HOTPLUG_ENABLE (1 << 23) +#define SDVO_ENCODING (0) +#define TMDS_ENCODING (2 << 10) +#define NULL_PACKET_VSYNC_ENABLE (1 << 9) +#define SDVOB_BORDER_ENABLE (1 << 7) +#define AUDIO_ENABLE (1 << 6) +#define VSYNC_ACTIVE_HIGH (1 << 4) +#define HSYNC_ACTIVE_HIGH (1 << 3) +#define PORT_DETECTED (1 << 2) + +#define HDMIC 0xe1150 +#define HDMID 0xe1160 +#define PCH_LVDS 0xe1180 + +#define AUD_CONFIG 0x62000 +#define AUD_DEBUG 0x62010 +#define AUD_VID_DID 0x62020 +#define AUD_RID 0x62024 +#define AUD_SUBN_CNT 0x62028 +#define AUD_FUNC_GRP 0x62040 +#define AUD_SUBN_CNT2 0x62044 +#define AUD_GRP_CAP 0x62048 +#define AUD_PWRST 0x6204c +#define AUD_SUPPWR 0x62050 +#define AUD_SID 0x62054 +#define AUD_OUT_CWCAP 0x62070 +#define AUD_OUT_PCMSIZE 0x62074 +#define AUD_OUT_STR 0x62078 +#define AUD_OUT_DIG_CNVT 0x6207c +#define AUD_OUT_CH_STR 0x62080 +#define AUD_OUT_STR_DESC 0x62084 +#define AUD_PINW_CAP 0x620a0 +#define AUD_PIN_CAP 0x620a4 +#define AUD_PINW_CONNLNG 0x620a8 +#define AUD_PINW_CONNLST 0x620ac +#define AUD_PINW_CNTR 0x620b0 +#define AUD_PINW_UNSOLRESP 0x620b8 +#define AUD_CNTL_ST 0x620b4 +#define AUD_PINW_CONFIG 0x620bc +#define AUD_HDMIW_STATUS 0x620d4 +#define AUD_HDMIW_HDMIEDID 0x6210c +#define AUD_HDMIW_INFOFR 0x62118 +#define AUD_CONV_CHCNT 0x62120 +#define AUD_CTS_ENABLE 0x62128 + +#define VIDEO_DIP_CTL 0x61170 + +#endif /* _I810_REG_H */ |