diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/i830_driver.c | 25 | ||||
-rw-r--r-- | src/i830_randr.c | 4 | ||||
-rw-r--r-- | src/i830_sdvo.c | 7 | ||||
-rw-r--r-- | src/i830_xf86Crtc.c | 410 | ||||
-rw-r--r-- | src/i830_xf86Crtc.h | 20 |
5 files changed, 375 insertions, 91 deletions
diff --git a/src/i830_driver.c b/src/i830_driver.c index 52647676..694c96f3 100644 --- a/src/i830_driver.c +++ b/src/i830_driver.c @@ -912,7 +912,7 @@ I830PreInit(ScrnInfoPtr pScrn, int flags) Bool enable; const char *chipname; int num_pipe; - int max_width; + int max_width, max_height; #ifdef XF86DRI unsigned long savedMMSize; #endif @@ -1183,10 +1183,16 @@ I830PreInit(ScrnInfoPtr pScrn, int flags) xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); if (IS_I965G(pI830)) + { max_width = 16384; + max_height = 4096; + } else - max_width = 8192 / pI830->cpp; - xf86CrtcSetSizeRange (pScrn, 320, 200, max_width, 2048); + { + max_width = 2048; + max_height = 2048; + } + xf86CrtcSetSizeRange (pScrn, 320, 200, max_width, max_height); /* Some of the probing needs MMIO access, so map it here. */ I830MapMMIO(pScrn); @@ -1830,14 +1836,14 @@ I830PreInit(ScrnInfoPtr pScrn, int flags) pI830->pEnt->device->videoRam ? X_CONFIG : X_DEFAULT, "VideoRam: %d KB\n", pScrn->videoRam); - if (!IS_I965G(pI830) && pScrn->displayWidth * pI830->cpp > 8192) { + if (!IS_I965G(pI830) && pScrn->displayWidth > 2048) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, - "Cannot support DRI with frame buffer stride > 8K.\n"); + "Cannot support DRI with frame buffer width > 2048.\n"); pI830->disableTiling = TRUE; pI830->directRenderingDisabled = TRUE; } - if (pScrn->virtualY > 2048) { + if (!IS_I965G(pI830) && pScrn->virtualY > 2048) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Cannot support > 2048 vertical lines. disabling acceleration.\n"); pI830->noAccel = TRUE; } @@ -3047,7 +3053,8 @@ i830AdjustFrame(int scrnIndex, int x, int y, int flags) ScrnInfoPtr pScrn = xf86Screens[scrnIndex]; xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); - xf86CrtcPtr crtc = config->output[config->compat_output]->crtc; + xf86OutputPtr output = config->output[config->compat_output]; + xf86CrtcPtr crtc = output->crtc; DPRINTF(PFX, "i830AdjustFrame: y = %d (+ %d), x = %d (+ %d)\n", x, pI830->xoffset, y, pI830->yoffset); @@ -3059,7 +3066,7 @@ i830AdjustFrame(int scrnIndex, int x, int y, int flags) (*pI830->AccelInfoRec->Sync)(pScrn); pI830->AccelInfoRec->NeedToSync = FALSE; } - i830PipeSetBase(crtc, x, y); + i830PipeSetBase(crtc, output->initial_x + x, output->initial_y + y); } } @@ -3596,7 +3603,7 @@ I830CheckDevicesTimer(OsTimerPtr timer, CARD32 now, pointer arg) * is this. */ - xf86ProbeOutputModes (pScrn); + xf86ProbeOutputModes (pScrn, 0, 0); xf86SetScrnInfoModes (pScrn); I830DGAReInit (pScrn->pScreen); xf86SwitchMode(pScrn->pScreen, pScrn->currentMode); diff --git a/src/i830_randr.c b/src/i830_randr.c index d5ccce37..83cf0238 100644 --- a/src/i830_randr.c +++ b/src/i830_randr.c @@ -95,7 +95,7 @@ xf86RandR12GetInfo (ScreenPtr pScreen, Rotation *rotations) } /* Re-probe the outputs for new monitors or modes */ - xf86ProbeOutputModes (scrp); + xf86ProbeOutputModes (scrp, 0, 0); xf86SetScrnInfoModes (scrp); I830DGAReInit (pScreen); @@ -818,7 +818,7 @@ xf86RandR12GetInfo12 (ScreenPtr pScreen, Rotation *rotations) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; - xf86ProbeOutputModes (pScrn); + xf86ProbeOutputModes (pScrn, 0, 0); xf86SetScrnInfoModes (pScrn); I830DGAReInit (pScreen); return xf86RandR12SetInfo12 (pScreen); diff --git a/src/i830_sdvo.c b/src/i830_sdvo.c index b5116be0..19b4b934 100644 --- a/src/i830_sdvo.c +++ b/src/i830_sdvo.c @@ -1207,7 +1207,12 @@ i830_sdvo_init(ScrnInfoPtr pScrn, int output_device) } strcpy (name, name_prefix); strcat (name, name_suffix); - xf86OutputRename (output, name); + if (!xf86OutputRename (output, name)) + { + xf86OutputDestroy (output); + return; + } + /* Set the input timing to the screen. Assume always input 0. */ i830_sdvo_set_target_input(output, TRUE, FALSE); diff --git a/src/i830_xf86Crtc.c b/src/i830_xf86Crtc.c index a0f44df5..ceb8f2ef 100644 --- a/src/i830_xf86Crtc.c +++ b/src/i830_xf86Crtc.c @@ -127,6 +127,33 @@ xf86CrtcDestroy (xf86CrtcPtr crtc) extern XF86ConfigPtr xf86configptr; +typedef enum { + OPTION_PREFERRED_MODE, + OPTION_POSITION, + OPTION_BELOW, + OPTION_RIGHT_OF, + OPTION_ABOVE, + OPTION_LEFT_OF, + OPTION_ENABLE, + OPTION_DISABLE, + OPTION_MIN_CLOCK, + OPTION_MAX_CLOCK, +} OutputOpts; + +static OptionInfoRec xf86OutputOptions[] = { + {OPTION_PREFERRED_MODE, "PreferredMode", OPTV_STRING, {0}, FALSE }, + {OPTION_POSITION, "Position", OPTV_STRING, {0}, FALSE }, + {OPTION_BELOW, "Below", OPTV_STRING, {0}, FALSE }, + {OPTION_RIGHT_OF, "RightOf", OPTV_STRING, {0}, FALSE }, + {OPTION_ABOVE, "Above", OPTV_STRING, {0}, FALSE }, + {OPTION_LEFT_OF, "LeftOf", OPTV_STRING, {0}, FALSE }, + {OPTION_ENABLE, "Enable", OPTV_BOOLEAN, {0}, FALSE }, + {OPTION_DISABLE, "Disable", OPTV_BOOLEAN, {0}, FALSE }, + {OPTION_MIN_CLOCK, "MinClock", OPTV_FREQ, {0}, FALSE }, + {OPTION_MAX_CLOCK, "MaxClock", OPTV_FREQ, {0}, FALSE }, + {-1, NULL, OPTV_NONE, {0}, FALSE }, +}; + static void xf86OutputSetMonitor (xf86OutputPtr output) { @@ -134,6 +161,12 @@ xf86OutputSetMonitor (xf86OutputPtr output) static const char monitor_prefix[] = "monitor-"; char *monitor; + if (output->options) + xfree (output->options); + + output->options = xnfalloc (sizeof (xf86OutputOptions)); + memcpy (output->options, xf86OutputOptions, sizeof (xf86OutputOptions)); + option_name = xnfalloc (strlen (monitor_prefix) + strlen (output->name) + 1); strcpy (option_name, monitor_prefix); @@ -144,7 +177,24 @@ xf86OutputSetMonitor (xf86OutputPtr output) else xf86MarkOptionUsedByName (output->scrn->options, option_name); xfree (option_name); - output->conf_monitor = xf86findMonitor (monitor, xf86configptr->conf_monitor_lst); + output->conf_monitor = xf86findMonitor (monitor, + xf86configptr->conf_monitor_lst); + if (output->conf_monitor) + xf86ProcessOptions (output->scrn->scrnIndex, + output->conf_monitor->mon_option_lst, + output->options); +} + +static Bool +xf86OutputEnabled (xf86OutputPtr output) +{ + /* Check to see if this output was disabled in the config file */ + if (xf86ReturnOptValBool (output->options, OPTION_ENABLE, TRUE) == FALSE || + xf86ReturnOptValBool (output->options, OPTION_DISABLE, FALSE) == TRUE) + { + return FALSE; + } + return TRUE; } xf86OutputPtr @@ -167,6 +217,8 @@ xf86OutputCreate (ScrnInfoPtr scrn, #ifdef RANDR_12_INTERFACE output->randr_output = NULL; #endif + xf86OutputSetMonitor (output); + if (xf86_config->output) outputs = xrealloc (xf86_config->output, (xf86_config->num_output + 1) * sizeof (xf86OutputPtr)); @@ -181,24 +233,24 @@ xf86OutputCreate (ScrnInfoPtr scrn, xf86_config->output = outputs; xf86_config->output[xf86_config->num_output++] = output; - xf86OutputSetMonitor (output); return output; } -void +Bool xf86OutputRename (xf86OutputPtr output, const char *name) { int len = strlen(name); char *newname = xalloc (len + 1); if (!newname) - return; /* so sorry... */ + return FALSE; /* so sorry... */ strcpy (newname, name); if (output->name != (char *) (output + 1)) xfree (output->name); output->name = newname; xf86OutputSetMonitor (output); + return TRUE; } void @@ -375,7 +427,9 @@ xf86PickCrtcs (ScrnInfoPtr pScrn, * If the two outputs desire the same mode, * see if they can be cloned */ - if (xf86ModesEqual (modes[o], modes[n])) + if (xf86ModesEqual (modes[o], modes[n]) && + config->output[o]->initial_x == config->output[n]->initial_x && + config->output[o]->initial_y == config->output[n]->initial_y) { for (l = 0; l < config->num_output; l++) if (output->possible_clones & (1 << l)) @@ -403,7 +457,8 @@ xf86PickCrtcs (ScrnInfoPtr pScrn, /* * Compute the virtual size necessary to place all of the available - * crtcs in a panorama configuration + * crtcs in the specified configuration and also large enough to + * resize any crtc to the largest available mode */ static void @@ -418,7 +473,13 @@ xf86DefaultScreenLimits (ScrnInfoPtr pScrn, int *widthp, int *heightp) for (c = 0; c < config->num_crtc; c++) { int crtc_width = 0, crtc_height = 0; + xf86CrtcPtr crtc = config->crtc[c]; + if (crtc->enabled) + { + crtc_width = crtc->x + crtc->desiredMode.HDisplay; + crtc_height = crtc->y + crtc->desiredMode.VDisplay; + } for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; @@ -436,7 +497,8 @@ xf86DefaultScreenLimits (ScrnInfoPtr pScrn, int *widthp, int *heightp) } } } - width += crtc_width; + if (crtc_width > width) + width = crtc_width; if (crtc_height > height) height = crtc_height; } @@ -448,6 +510,186 @@ xf86DefaultScreenLimits (ScrnInfoPtr pScrn, int *widthp, int *heightp) *heightp = height; } +#define POSITION_UNSET -100000 + +static Bool +xf86InitialOutputPositions (ScrnInfoPtr pScrn, DisplayModePtr *modes) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(pScrn); + int o; + int min_x, min_y; + + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + + output->initial_x = output->initial_y = POSITION_UNSET; + } + + /* + * Loop until all outputs are set + */ + for (;;) + { + Bool any_set = FALSE; + Bool keep_going = FALSE; + + for (o = 0; o < config->num_output; o++) + { + static const OutputOpts relations[] = { + OPTION_BELOW, OPTION_RIGHT_OF, OPTION_ABOVE, OPTION_LEFT_OF + }; + xf86OutputPtr output = config->output[o]; + xf86OutputPtr relative; + char *relative_name; + char *position; + OutputOpts relation; + int r; + + if (output->initial_x != POSITION_UNSET) + continue; + position = xf86GetOptValString (output->options, + OPTION_POSITION); + /* + * Absolute position wins + */ + if (position) + { + int x, y; + if (sscanf (position, "%d %d", &x, &y) == 2) + { + output->initial_x = x; + output->initial_y = y; + } + else + { + xf86DrvMsg (pScrn->scrnIndex, X_ERROR, + "Output %s position not of form \"x y\"\n", + output->name); + output->initial_x = output->initial_y = 0; + } + any_set = TRUE; + continue; + } + /* + * Next comes relative positions + */ + relation = 0; + relative_name = NULL; + for (r = 0; r < 4; r++) + { + relation = relations[r]; + relative_name = xf86GetOptValString (output->options, + relation); + if (relative_name) + break; + } + if (relative_name) + { + int or; + relative = NULL; + for (or = 0; or < config->num_output; or++) + { + xf86OutputPtr out_rel = config->output[or]; + XF86ConfMonitorPtr rel_mon = out_rel->conf_monitor; + char *name; + + if (rel_mon) + name = rel_mon->mon_identifier; + else + name = out_rel->name; + if (!strcmp (relative_name, name)) + { + relative = config->output[or]; + break; + } + } + if (!relative) + { + xf86DrvMsg (pScrn->scrnIndex, X_ERROR, + "Cannot position output %s relative to unknown output %s\n", + output->name, relative_name); + output->initial_x = 0; + output->initial_y = 0; + any_set = TRUE; + continue; + } + if (relative->initial_x == POSITION_UNSET) + { + keep_going = TRUE; + continue; + } + output->initial_x = relative->initial_x; + output->initial_y = relative->initial_y; + switch (relation) { + case OPTION_BELOW: + output->initial_y += modes[or]->VDisplay; + break; + case OPTION_RIGHT_OF: + output->initial_x += modes[or]->HDisplay; + break; + case OPTION_ABOVE: + output->initial_y -= modes[o]->VDisplay; + break; + case OPTION_LEFT_OF: + output->initial_x -= modes[o]->HDisplay; + break; + default: + break; + } + any_set = TRUE; + continue; + } + + /* Nothing set, just stick them at 0,0 */ + output->initial_x = 0; + output->initial_y = 0; + any_set = TRUE; + } + if (!keep_going) + break; + if (!any_set) + { + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + if (output->initial_x == POSITION_UNSET) + { + xf86DrvMsg (pScrn->scrnIndex, X_ERROR, + "Output position loop. Moving %s to 0,0\n", + output->name); + output->initial_x = output->initial_y = 0; + break; + } + } + } + } + + /* + * normalize positions + */ + min_x = 1000000; + min_y = 1000000; + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + + if (output->initial_x < min_x) + min_x = output->initial_x; + if (output->initial_y < min_y) + min_y = output->initial_y; + } + + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + + output->initial_x -= min_x; + output->initial_y -= min_y; + } + return TRUE; +} + /* * XXX walk the monitor mode list and prune out duplicates that * are inserted by xf86DDCMonitorSet. In an ideal world, that @@ -536,13 +778,13 @@ i830xf86SortModes (DisplayModePtr input) #define DEBUG_REPROBE 1 void -xf86ProbeOutputModes (ScrnInfoPtr pScrn) +xf86ProbeOutputModes (ScrnInfoPtr pScrn, int maxX, int maxY) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(pScrn); int o; - int virtualX, virtualY; - xf86RandR12GetOriginalVirtualSize (pScrn, &virtualX, &virtualY); + if (maxX == 0 || maxY == 0) + xf86RandR12GetOriginalVirtualSize (pScrn, &maxX, &maxY); /* Elide duplicate modes before defaulting code uses them */ xf86PruneDuplicateMonitorModes (pScrn->monitor); @@ -553,11 +795,13 @@ xf86ProbeOutputModes (ScrnInfoPtr pScrn) xf86OutputPtr output = config->output[o]; DisplayModePtr mode; DisplayModePtr config_modes = NULL, output_modes, default_modes; - XF86ConfMonitorPtr conf_monitor; + char *preferred_mode; xf86MonPtr edid_monitor; + XF86ConfMonitorPtr conf_monitor; MonRec mon_rec; int min_clock = 0; int max_clock = 0; + double clock; enum { sync_config, sync_edid, sync_default } sync_source = sync_default; while (output->probed_modes != NULL) @@ -632,6 +876,14 @@ xf86ProbeOutputModes (ScrnInfoPtr pScrn) } } } + + if (xf86GetOptValFreq (output->options, OPTION_MIN_CLOCK, + OPTUNITS_KHZ, &clock)) + min_clock = (int) clock; + if (xf86GetOptValFreq (output->options, OPTION_MAX_CLOCK, + OPTUNITS_KHZ, &clock)) + max_clock = (int) clock; + /* * These limits will end up setting a 1024x768@60Hz mode by default, * which seems like a fairly good mode to use when nothing else is @@ -677,9 +929,11 @@ xf86ProbeOutputModes (ScrnInfoPtr pScrn) output->probed_modes = xf86ModesAdd (output->probed_modes, default_modes); /* - * Check all modes against virtual size + * Check all modes against max size */ - i830xf86ValidateModesSize (pScrn, output->probed_modes, virtualX, virtualY, 0); + if (maxX && maxY) + i830xf86ValidateModesSize (pScrn, output->probed_modes, + maxX, maxY, 0); /* * Check all modes against output @@ -693,27 +947,28 @@ xf86ProbeOutputModes (ScrnInfoPtr pScrn) output->probed_modes = i830xf86SortModes (output->probed_modes); /* Check for a configured preference for a particular mode */ - if (conf_monitor) - { - char *preferred_mode = xf86findOptionValue (conf_monitor->mon_option_lst, - "Preferred Mode"); + preferred_mode = xf86GetOptValString (output->options, + OPTION_PREFERRED_MODE); - if (preferred_mode) + if (preferred_mode) + { + for (mode = output->probed_modes; mode; mode = mode->next) { - for (mode = output->probed_modes; mode; mode = mode->next) - if (!strcmp (preferred_mode, mode->name)) - break; - if (mode && mode != output->probed_modes) + if (!strcmp (preferred_mode, mode->name)) { - if (mode->prev) - mode->prev->next = mode->next; - if (mode->next) - mode->next->prev = mode->prev; - mode->next = output->probed_modes; - output->probed_modes->prev = mode; - mode->prev = NULL; - output->probed_modes = mode; + if (mode != output->probed_modes) + { + if (mode->prev) + mode->prev->next = mode->next; + if (mode->next) + mode->next->prev = mode->prev; + mode->next = output->probed_modes; + output->probed_modes->prev = mode; + mode->prev = NULL; + output->probed_modes = mode; + } mode->type |= M_T_PREFERRED; + break; } } } @@ -760,7 +1015,6 @@ xf86SetScrnInfoModes (ScrnInfoPtr pScrn) xf86OutputPtr output; xf86CrtcPtr crtc; DisplayModePtr last, mode; - int originalVirtualX, originalVirtualY; output = config->output[config->compat_output]; if (!output->crtc) @@ -788,18 +1042,6 @@ xf86SetScrnInfoModes (ScrnInfoPtr pScrn) /* Set pScrn->modes to the mode list for the 'compat' output */ pScrn->modes = xf86DuplicateModes(pScrn, output->probed_modes); - xf86RandR12GetOriginalVirtualSize(pScrn, &originalVirtualX, &originalVirtualY); - - /* Disable modes in the XFree86 DDX list that are larger than the current - * virtual size. - */ - i830xf86ValidateModesSize(pScrn, pScrn->modes, - originalVirtualX, originalVirtualY, - pScrn->displayWidth); - - /* Strip out anything that we threw out for virtualX/Y. */ - i830xf86PruneInvalidModes(pScrn, &pScrn->modes, TRUE); - for (mode = pScrn->modes; mode; mode = mode->next) if (xf86ModesEqual (mode, &crtc->desiredMode)) break; @@ -835,35 +1077,33 @@ xf86InitialConfiguration (ScrnInfoPtr pScrn) DisplayModePtr target_mode = NULL; xf86CrtcPtr *crtcs; DisplayModePtr *modes; - int width, height; - - xf86ProbeOutputModes (pScrn); + Bool *enabled; + int width; + int height; - if (pScrn->display->virtualX == 0) - { - /* - * Expand virtual size to cover potential mode switches - */ - xf86DefaultScreenLimits (pScrn, &width, &height); - - pScrn->display->virtualX = width; - pScrn->display->virtualY = height; - } - else - { + if (pScrn->display->virtualX) width = pScrn->display->virtualX; + else + width = config->maxWidth; + if (pScrn->display->virtualY) height = pScrn->display->virtualY; - } - if (width > pScrn->virtualX) - pScrn->virtualX = width; - if (height > pScrn->virtualY) - pScrn->virtualY = height; - + else + height = config->maxHeight; + + xf86ProbeOutputModes (pScrn, width, height); + crtcs = xnfcalloc (config->num_output, sizeof (xf86CrtcPtr)); modes = xnfcalloc (config->num_output, sizeof (DisplayModePtr)); + enabled = xnfcalloc (config->num_output, sizeof (Bool)); for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + modes[o] = NULL; + enabled[o] = (xf86OutputEnabled (output) && + output->status != XF86OutputStatusDisconnected); + } /* * Let outputs with preferred modes drive screen size @@ -872,7 +1112,7 @@ xf86InitialConfiguration (ScrnInfoPtr pScrn) { xf86OutputPtr output = config->output[o]; - if (output->status != XF86OutputStatusDisconnected && + if (enabled[o] && xf86OutputHasPreferredMode (output, width, height)) { target_mode = xf86DefaultMode (output, width, height); @@ -889,7 +1129,7 @@ xf86InitialConfiguration (ScrnInfoPtr pScrn) for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; - if (output->status != XF86OutputStatusDisconnected) + if (enabled[o]) { target_mode = xf86DefaultMode (output, width, height); if (target_mode) @@ -905,10 +1145,23 @@ xf86InitialConfiguration (ScrnInfoPtr pScrn) { xf86OutputPtr output = config->output[o]; - if (output->status != XF86OutputStatusDisconnected && !modes[o]) + if (enabled[o] && !modes[o]) modes[o] = xf86ClosestMode (output, target_mode, width, height); } + /* + * Set the position of each output + */ + if (!xf86InitialOutputPositions (pScrn, modes)) + { + xfree (crtcs); + xfree (modes); + return FALSE; + } + + /* + * Assign CRTCs to fit output configuration + */ if (!xf86PickCrtcs (pScrn, crtcs, modes, 0, width, height)) { xfree (crtcs); @@ -928,7 +1181,7 @@ xf86InitialConfiguration (ScrnInfoPtr pScrn) crtc->enabled = FALSE; memset (&crtc->desiredMode, '\0', sizeof (crtc->desiredMode)); } - + /* * Set initial configuration */ @@ -942,13 +1195,28 @@ xf86InitialConfiguration (ScrnInfoPtr pScrn) { crtc->desiredMode = *mode; crtc->enabled = TRUE; - crtc->x = 0; - crtc->y = 0; + crtc->x = output->initial_x; + crtc->y = output->initial_y; output->crtc = crtc; - /* XXX set position; for now, we clone */ } } + if (pScrn->display->virtualX == 0) + { + /* + * Expand virtual size to cover potential mode switches + */ + xf86DefaultScreenLimits (pScrn, &width, &height); + + pScrn->display->virtualX = width; + pScrn->display->virtualY = height; + } + + if (width > pScrn->virtualX) + pScrn->virtualX = width; + if (height > pScrn->virtualY) + pScrn->virtualY = height; + /* Mirror output modes to pScrn mode list */ xf86SetScrnInfoModes (pScrn); diff --git a/src/i830_xf86Crtc.h b/src/i830_xf86Crtc.h index b30003e7..2555c55d 100644 --- a/src/i830_xf86Crtc.h +++ b/src/i830_xf86Crtc.h @@ -289,6 +289,16 @@ struct _xf86Output { DisplayModePtr probed_modes; /** + * Options parsed from the related monitor section + */ + OptionInfoPtr options; + + /** + * Configured monitor section + */ + XF86ConfMonitorPtr conf_monitor; + + /** * Desired initial position */ int initial_x, initial_y; @@ -313,12 +323,6 @@ struct _xf86Output { /** Output name */ char *name; - /** Configured monitor name */ - char *monitor_name; - - /** Monitor information from config file */ - XF86ConfMonitorPtr conf_monitor; - /** output-specific functions */ const xf86OutputFuncsRec *funcs; @@ -410,14 +414,14 @@ xf86OutputCreate (ScrnInfoPtr scrn, const xf86OutputFuncsRec *funcs, const char *name); -void +Bool xf86OutputRename (xf86OutputPtr output, const char *name); void xf86OutputDestroy (xf86OutputPtr output); void -xf86ProbeOutputModes (ScrnInfoPtr pScrn); +xf86ProbeOutputModes (ScrnInfoPtr pScrn, int maxX, int maxY); void xf86SetScrnInfoModes (ScrnInfoPtr pScrn); |