summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-09sna: Do not rely on udev_monitor_receive_device() being non-blockingChris Wilson
The libudev documentation says that is it non-blocking by default, but experience shows otherwise. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-08uxa: Do not FreePixmap(screen->devPrivate)Chris Wilson
Prevent the crash caused by commit 444a1f7a8802999e27ecf5f6eb598df2206f7277 Author: Brendan King <brendan.king@imgtec.com> Date: Thu Apr 24 11:37:45 2014 +0100 fb: fix screen pixmap leak on server reset Call FreePixmap() instead of free() to destroy the screen pixmap in fbCloseScreen(). Signed-off-by: Frank Binns <frank.binns@imgtec.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-08sna/dri2: DBG compile fixChris Wilson
Typo in DBG message. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-08sna/dri2: Allow xchg to replace the frontbuffer when all outputs are offChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-08sna/dri2: Use xchg for offscreen drawables where applicableChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-08sna/dri2: Explicitly drain the pending event queue before swappingChris Wilson
As there may be some latency between the wakeup and the queue, do a final check if there is a pending vblank event before we decide whether to chain up or perform an immediate flip. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-08sna/dri2: Mark frames under constructionChris Wilson
As we may recurse into the vblank handler whilst waiting for the TearFree shadow, we need to be careful that we do not queue the frame from the vblank handler that we are in the process of constructing. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-08sna/dri2: Check the xchg against the Pixmap sizeChris Wilson
As the Window may be resized between the client sending the swap request and the xchg being processed, we need to validate the swap against the final target not the buffers supplied originally by the client. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-07sna: Restore backlight when switching to VTChris Wilson
fbcon doesn't adjust the backlight when it takes over. Therefore if X performs a VT switch whilst its outputs are off, fbcon wakes up with no backlight and users are unhappy. Make the assumption that whoever takes over the VT will set the outputs as it desires, and that the failsafe value is to then turn the backlight to full. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67025 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-07sna: Fix reporting of TearFreeChris Wilson
The switch was moved after we checked whether pageflips are supported, but the log message was left in the old location. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-07sna: Release CRTC on VT switchChris Wilson
In order to free up memory and improve our bookkeeping when the X server is switched away from the current VT, disable the CRTC. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-07sna: Allow TearFree to be enabled by default via configureChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-07sna: Fix TearFree for non-compositorsChris Wilson
The tearfree code forgot to update the shadow bo, so after the first flip it would be rendering to the scanout anyway and flip to itself periodically. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-06sna: Fix no relaxed delta path for gen4+Chris Wilson
This is for debug purposes only. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-06sna: Auto-retire upload proxiesChris Wilson
This was disabled in commit 9f4f855ba37966fb91d31e9081d03cf72affb154 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon May 26 07:06:18 2014 +0100 sna: Implicit release of upload buffers considered bad as retiring the buffers during the command setup could free one of the earlier bo used in the command. But discarding the snooped bo could still be advantageous. So restore the automatic discard of upload proxies, but make sure we only do between operations. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matti Hämäläinen <ccr@tnsp.org>
2014-06-06sna: Only allow the inplace copy to replace a complete overwritten GPU boChris Wilson
And double check after recreating the new GPU bo that is still mappable. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-06sna: Rearrange scanout_flush checking to avoid potential crashChris Wilson
With a shadow, we may never attach a GPU bo to the frontbuffer, so be careful when checking the scanout not to dereference that NULL pointer. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-06sna: Report KMS driver versionChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-06man: Update notes about TearFreeChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-06sna/dri2: Restore flush on front buffers after swapping boChris Wilson
Fallout from commit 8369166349c92a20d9a2e7d0256e63f66fe2682b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jun 4 08:29:51 2014 +0100 sna/dri2: Enable immediate buffer exchanges We set the flush hint too early, as we may need to swap the GPU bo for a more appropriate buffer for DRI. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-06sna: Hook up a backlight udev monitor for external changesChris Wilson
Changes to the backlights are notified through uevents. Hooking up a udev monitor to listen out for external changes to the backlight (e.g. through ACPI function keys, or by the user writing to /sys/class/backlight directly) is easier than enabling polling on the backlight sysfs file using X's select() mechanism. Since we listen to backlight changes, we have to be careful not to confuse the side-effects of disabling connectors (which may cause either ourselves or the kernel to turn off the backlight) with the user value. Many thanks to Alexander Mezin for the suggestion to use udev for tracking the notifications for external changes to the backlight. Reported-by: Alexander Mezin <mezin.alexander@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79699 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-05sna: When the output is off, report the cached backlight valueChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-05sna: Inline calls to save/restore backlight around output DPMSChris Wilson
The intertwined logic was a little confusing to read mixed between the functions, so inline it. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-05sna: Set initial output DPMS state from kernelChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-05sna: Make sure we recompute the vblank interval after reconfiguring the CRTCChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-05sna: Skip marking the CRTC as damaged for TearFreeChris Wilson
As we have reorder the application of damage on a TearFree frontbuffer to before we attach the CRTC, we do not need to then schedule the update afterwards (until it gets drawn by the client). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-05sna: Fix DBG compilationChris Wilson
Update the DBG to reflect the new arguments to sna_damage_reduce_all() Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-05sna: Curry parameters to sna_damage_all()Chris Wilson
It is far easily to pass the PixmapPtr into the function and have it pluck out the width and height than do so in all callers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-05sna: Mark CPU as all damaged when discarding a busy GPU boChris Wilson
When we discard a GPU bo, we need to make sure that the remaining content is marked as only accessible via the CPU shadow pointer. Regression from commit 65301412ecf2d55ab55a2d7faeaa048d4ee8b1d0 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat May 17 20:59:38 2014 +0100 sna: Discard active GPU buffers before uploading into them Reported-by: Jan Alexander Steffens <jan.steffens@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79517 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-05sna/dri2: Enable immediate buffer exchangesChris Wilson
The primary benefit of this is avoid the extra blit when using a compositor and instead propagate the compositor flip on the frontbuffer to the scanout, or equivalently allows a fullscreen game to flip onto the scanout without intervention by TearFree. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-03configure: XORG_DRIVER_CHECK_EXT does not create CFLAGS/LIBS variablesChris Wilson
XORG_DRIVER_CHECK_EXT only adds the package name to the list of REQUIRED_MODULES (which is later passed to pkg-config). For our optional dependencies, we must do a later call to pkg-config to verify the package is available and then remember to include the includes with the CFLAGS. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-03configure: Remove xf86driproto from REQUIRED_MODULESChris Wilson
We only depend upon the original DRI1 infrastructure when building i810 with DRI support. So unless that is true, do not throw an error if the legacy protocol is absent. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-03configure: Don't link the driver against libX11Adam Jackson
78dc0c04745ad4485b994f67833f4a155749f01d added REQUIRED_MODULES to the driver link line for... some reason. That pulled in the libs from the XF86DRI check, which near as I can tell has always been wrong, all of the other extension checks just look for the protocol module and xextproto doesn't define dri1 protocol in any case. Signed-off-by: Adam Jackson <ajax@redhat.com>
2014-06-03sna: Replace the bo for tiled uploads if not suitable and being replacedChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-03sna: Allow replacements to cancel operations between both bo under a PixmapChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-03sna: Discard unwanted damage when promoting to a full CPU migrationChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02sna: Fix early return in download using the GPUChris Wilson
In commit 961139f5878572ebea268a0bbf47caf05af9093f Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri May 30 09:45:15 2014 +0100 sna: Use manual detiling for downloads the code for deciding when to use the GPU was refactored into a new function that also performed the transfer, but failed to notice the early return. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02sna: Use CPU mmappings for linear uploadsChris Wilson
The other half of the commit that accidentally got included with commit bb49222a514b1d6041f3d9530a22f5701377118b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Jun 2 08:25:52 2014 +0100 sna: Add DBG hints for using inplace CPU mmappings Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02Only enable the new Cursor API for the next pre-release of XorgChris Wilson
Make sure we can compile against the pre-release tarballs at the expense of an innocuous compile warning if compiled against xserver.git Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02uxa: Add Present extension supportKeith Packard
Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Eric Anholt <eric@anholt.net> Conflicts: configure.ac src/uxa/intel.h src/uxa/intel_driver.c
2014-06-02uxa: Restructure DRM event handling.Keith Packard
This refactors the drm interrupt handling logic quite a bit, both to allow for either DRI2 or Present handlers, but also to eliminate passing pointers through the kernel. Passing pointers left the kernel holding the only reference to some internal X server data structures. After a server reset, the X server would end up using stale pointers stored in those structures. Using simple integers makes it possible to empty the queue of pending interrupt data and then ignore the stale kernel data. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2014-06-02uxa: Support 64-bit MSC values. Handle kernel vageries about MSC reportingKeith Packard
The kernel sometimes reports bogus MSC values, especially when suspending and resuming the machine. Deal with this by tracking an offset to ensure that the MSC seen by applications increases monotonically, and at a reasonable pace. Also, provide a full 64 bits of MSC value by noticing wrapping and tracking the high 32-bits of MSC separately. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Eric Anholt <eric@anholt.net> Conflicts: src/uxa/intel_dri.c
2014-06-02uxa: Add DRI3 and miSyncShm supportChris Wilson
Based on a patch by Keith Packard. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02sna: Add support for PresentChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02sna: Add support for DRI3Chris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02sna: Relax tiling height restrictionsChris Wilson
Only force the even-tile-row alignment if we have an old GPU with an old kernel that doesn't perform conservative alignment for us (as required). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02intel-virtual-output: Add DRI3 xfer pathChris Wilson
Just as proof-of-principle. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02Add rudimentary tests for PresentChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02Add rudimentary tests for DRI3Chris Wilson
This is a simple little test to create a pixmap from a local bo, copy it to a normal pixmap, then read it back by importing it into anther local bo. It tests the fundamental mechanisms of opening a DRI3 render device, importing into pixmaps, exporting into /buffers and a read-barrier. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2014-06-02intel: Clear structs for valgrindChris Wilson
When probing the module, clear structs passed into unknown ioctls to keep valgrind quiet. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-24 16:45:53 +0000