Age | Commit message (Collapse) | Author |
|
First comes the swap overhead measurement for various window modes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
So libobj/ wasn't included in the tarball, and nor was the compatability
functions being added to the driver when they were needed. The oddity is
that using the ./configure script (and thus make distcheck) succeeds. It
was only when 'autoreconf -fi' was run was the first error encoutered.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Tobias Klausmann
|
|
Once the xserver stops running as root on kms capabable systems, we will need
some other way to access the backlight.
The approach taken in this patch moves most of the heavy lifting to a
helper that runs with root privileges and pipes our requested brightness
into the sysfs backlight interface. Where required, we use pkexec to
launch the helper with the elevated privilege.
v2: Amalgamate much more of the duplicate code.
Keep the daemon and pipe alive for the lifetime of the backlight interface.
Provide an alternative for systems without PolicyKit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> [v1]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
If we find that the headers for the tools are not available on the
system, simply disable building them as they are not essential features
of the driver.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Based on the original implementation (hybrid-screenclone) by
Tomáš Janoušek, and Bumblebee integration by Kevin Puetz.
intel-virtual-output utilizes local VirtualHeads to present a contiguous
desktop to the local display manager, but maps the drawing on those
outputs to the remote display, and provides bidirectional RandR proxy so
that you can resize the remote display and configure it within your
desktop. The remote display should also send hotplug events back to the
local desktop, for reconfiguration on the fly.
Ideally the remote display is a discrete GPU on the same host so that we
can use local Shared Memory transport and avoid sending data over the
wire (though it will work in that setup). Ideally you would have userptr
support to provide zero-copy rendering between the GPUs, or have dma-buf
(in which case you would be using PRIME). For remote rendering, no
compression is done so this fares worse than VNC.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
i.e. move the toplevel uxa/*.[ch] into src/uxa/*.[ch]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Move all the UXA backend specifc files into their own subdirectory.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Probe for i830_dri.so and, if it exists, use that driver in preference
to i915_dri.so for DRI (i.e. GL clients). This was suggested in the
context of distributions supplying i915g as the main DRI driver for
gen3, in which case we need to provide a separate DRI driver for gen2.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
When running autoreconf, it's possible to give flags to the underlying
aclocal by declaring a ACLOCAL_AMFLAGS variable in the top level
Makefile.am.
Putting ${ACLOCAL_FLAGS} there allows the user to set an environment
variable up before running autogen.sh and pull in the right directories
to look for m4 macros, say an up-to-date version of the xorg-util macros.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
This reverts commit 9184af921bc2f332fcb6c9b47001414378eab8e2.
All X.Org modules must be able to be configured with autoconf 2.60.
In addition, version 2.63 has GPL licensing issues which prevents
some vendor to release software based on it.
The AM_SILENT_RULES are already handled by XORG_DEFAULT_OPTIONS.
All X.Org modules must be able to be configured with libtool 1.5.
AM_MAINTAINER_MODE default value is "enabled" already.
We use the same autogen script for all x.org modules.
There are proposals for changes which should be reviewed and eventually
applied to all modules together.
The lt*.m4 patterns are already included in the root .gitignore file.
This can be proposed as a change to all modules, but it invloves
changing the topvel .gitignore, the m4/.gitignore, the ACLOCAL_AMFLAGS
and the AC_CONFIG_MACRO_DIR together.
For more information on project wide configuration guidelines,
consult http://www.x.org/wiki/ModularDevelopersGuide
and http://www.x.org/wiki/NewModuleGuidelines.
Acked-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
The premise is that switching between rings (i.e. the BLT and
RENDER rings) on SandyBridge imposes a large latency overhead whilst
rendering. The cause is that in order to switch rings, we need to split
the batch earlier than is desired and to add serialisation between the
rings. Both of which incur large overhead.
By switching to using a pure 3D blit engine (ok, not so pure as the BLT
engine still has uses for the core drawing model which can not be easily
represented without a combinatorial explosion of shaders) we can take
advantage of additional efficiencies, such as relative relocations, that
have been incorporated into recent hardware advances. However, even
older hardware performs better from avoiding the implicit context
switches and from the batching efficiency of the 3D pipeline...
But this is X, and PolyGlyphBlt still exists and remains in use. So for
the operations that are not worth accelerating in hardware, we introduce a
shadow buffer mechanism through out and reintroduce pixmap migration.
Doing this efficiently is the cornerstone of ensuring that we do exploit
the increased potential of recent hardware for running old applications and
environments (i.e. so that the latest and greatest chip is actually faster
than gen2!)
For the curious, sna is SandyBridge's New Acceleration. If you are
running older chipsets and welcome the performance increase offered by
this patch, then you may choose to call it Snazzy instead.
Speedups
========
gen3 firefox-fishtank 1203584.56 (1203842.75 0.01%) -> 85561.71 (125146.44 14.87%): 14.07x speedup
gen5 grads-heat-map 3385.42 (3489.73 1.44%) -> 350.29 (350.75 0.18%): 9.66x speedup
gen3 xfce4-terminal-a1 4179.02 (4180.09 0.06%) -> 503.90 (531.88 4.48%): 8.29x speedup
gen4 grads-heat-map 2458.66 (2826.34 4.64%) -> 348.82 (349.20 0.29%): 7.05x speedup
gen3 grads-heat-map 1443.33 (1445.32 0.09%) -> 298.55 (298.76 0.05%): 4.83x speedup
gen3 swfdec-youtube 3836.14 (3894.14 0.95%) -> 889.84 (979.56 5.99%): 4.31x speedup
gen6 grads-heat-map 742.11 (744.44 0.15%) -> 172.51 (172.93 0.20%): 4.30x speedup
gen3 firefox-talos-svg 71740.44 (72370.13 0.59%) -> 21959.29 (21995.09 0.68%): 3.27x speedup
gen5 gvim 8045.51 (8071.47 0.17%) -> 2589.38 (3246.78 10.74%): 3.11x speedup
gen6 poppler 3800.78 (3817.92 0.24%) -> 1227.36 (1230.12 0.30%): 3.10x speedup
gen6 gnome-terminal-vim 9106.84 (9111.56 0.03%) -> 3459.49 (3478.52 0.25%): 2.63x speedup
gen5 midori-zoomed 9564.53 (9586.58 0.17%) -> 3677.73 (3837.02 2.02%): 2.60x speedup
gen5 gnome-terminal-vim 38167.25 (38215.82 0.08%) -> 14901.09 (14902.28 0.01%): 2.56x speedup
gen5 poppler 13575.66 (13605.04 0.16%) -> 5554.27 (5555.84 0.01%): 2.44x speedup
gen5 swfdec-giant-steps 8941.61 (8988.72 0.52%) -> 3851.98 (3871.01 0.93%): 2.32x speedup
gen5 xfce4-terminal-a1 18956.60 (18986.90 0.07%) -> 8362.75 (8365.70 0.01%): 2.27x speedup
gen5 firefox-fishtank 88750.31 (88858.23 0.14%) -> 39164.57 (39835.54 0.80%): 2.27x speedup
gen3 midori-zoomed 2392.13 (2397.82 0.14%) -> 1109.96 (1303.10 30.35%): 2.16x speedup
gen6 gvim 2510.34 (2513.34 0.20%) -> 1200.76 (1204.30 0.22%): 2.09x speedup
gen5 firefox-planet-gnome 40478.16 (40565.68 0.09%) -> 19606.22 (19648.79 0.16%): 2.06x speedup
gen5 gnome-system-monitor 10344.47 (10385.62 0.29%) -> 5136.69 (5256.85 1.15%): 2.01x speedup
gen3 poppler 2595.23 (2603.10 0.17%) -> 1297.56 (1302.42 0.61%): 2.00x speedup
gen6 firefox-talos-gfx 7184.03 (7194.97 0.13%) -> 3806.31 (3811.66 0.06%): 1.89x speedup
gen5 evolution 8739.25 (8766.12 0.27%) -> 4817.54 (5050.96 1.54%): 1.81x speedup
gen3 evolution 1684.06 (1696.88 0.35%) -> 1004.99 (1008.55 0.85%): 1.68x speedup
gen3 gnome-terminal-vim 4285.13 (4287.68 0.04%) -> 2715.97 (3202.17 13.52%): 1.58x speedup
gen5 swfdec-youtube 5843.94 (5951.07 0.91%) -> 3810.86 (3826.04 1.32%): 1.53x speedup
gen4 poppler 7496.72 (7558.83 0.58%) -> 5125.08 (5247.65 1.44%): 1.46x speedup
gen4 gnome-terminal-vim 21126.24 (21292.08 0.85%) -> 14590.25 (15066.33 1.80%): 1.45x speedup
gen5 firefox-talos-svg 99873.69 (100300.95 0.37%) -> 70745.66 (70818.86 0.05%): 1.41x speedup
gen4 firefox-planet-gnome 28205.10 (28304.45 0.27%) -> 19996.11 (20081.44 0.56%): 1.41x speedup
gen5 firefox-talos-gfx 93070.85 (93194.72 0.10%) -> 67687.93 (70374.37 1.30%): 1.37x speedup
gen4 evolution 6696.25 (6854.14 0.85%) -> 4958.62 (5027.73 0.85%): 1.35x speedup
gen3 swfdec-giant-steps 2538.03 (2539.30 0.04%) -> 1895.71 (2050.62 62.43%): 1.34x speedup
gen4 gvim 4356.18 (4422.78 0.70%) -> 3276.31 (3281.69 0.13%): 1.33x speedup
gen6 evolution 1242.13 (1245.44 0.72%) -> 953.76 (954.54 0.07%): 1.30x speedup
gen6 firefox-planet-gnome 4554.23 (4560.69 0.08%) -> 3758.76 (3768.97 0.28%): 1.21x speedup
gen3 firefox-talos-gfx 6264.13 (6284.65 0.30%) -> 5261.56 (5370.87 1.28%): 1.19x speedup
gen4 midori-zoomed 4771.13 (4809.90 0.73%) -> 4037.03 (4118.93 0.85%): 1.18x speedup
gen6 swfdec-giant-steps 1557.06 (1560.13 0.12%) -> 1336.34 (1341.29 0.32%): 1.17x speedup
gen4 firefox-talos-gfx 80767.28 (80986.31 0.17%) -> 69629.08 (69721.71 0.06%): 1.16x speedup
gen6 midori-zoomed 1463.70 (1463.76 0.08%) -> 1331.45 (1336.56 0.22%): 1.10x speedup
Slowdowns
=========
gen6 xfce4-terminal-a1 2030.25 (2036.23 0.25%) -> 2144.60 (2240.31 4.29%): 1.06x slowdown
gen4 swfdec-youtube 3580.00 (3597.23 3.92%) -> 3826.90 (3862.24 0.91%): 1.07x slowdown
gen4 firefox-talos-svg 66112.25 (66256.51 0.11%) -> 71433.40 (71584.31 0.14%): 1.08x slowdown
gen4 gnome-system-monitor 5691.60 (5724.03 0.56%) -> 6707.56 (6747.83 0.33%): 1.18x slowdown
gen3 ocitysmap 3494.05 (3502.44 0.20%) -> 4321.99 (4524.42 2.78%): 1.24x slowdown
gen4 ocitysmap 3628.42 (3641.66 9.37%) -> 5177.16 (5828.74 8.38%): 1.43x slowdown
gen5 ocitysmap 4027.77 (4068.11 0.80%) -> 5748.26 (6282.25 7.38%): 1.43x slowdown
gen6 ocitysmap 1401.61 (1402.24 0.40%) -> 2365.74 (2379.14 4.12%): 1.69x slowdown
[Note the performance regression for ocitysmap comes from that we now
attempt to support rendering to and (more importantly) from large
surfaces. By enabling such operations is the only way to one day be
faster than purely using the CPU, in the meantime we suffer regression
due to the increased migration and aperture thrashing. The other couple
of regressions will be eliminated with improved span and shader support,
now that the framework for such is in place.]
The performance increase for Cairo completely overlooks the other
critical aspects of the architecture:
World of Padman:
gen3 (800x600): 57.5 -> 96.2
gen4 (800x600): 47.8 -> 74.6
gen6 (1366x768): 100.4 -> 140.3 [F15]
144.3 -> 146.4 [drm-intel-next]
x11perf (gen6);
aa10text: 3.47 -> 14.3 Mglyphs/s [unthrottled!]
copywinwin10: 1.66 -> 1.99 Mops/s
copywinpix10: 2.28 -> 2.98 Mops/s
And we do not have a good measure for how much improvement the reworking
of the fallback paths give, except that xterm is now over 4x faster...
PS: This depends upon the Xorg patchset "Remove the cacheing of the last
scratch PixmapRec" for correct invalidations of scratch Pixmaps (used by
the dix to implement SHM operations, used by chromium and gtk+ pixbufs.
PPS: ./configure --enable-sna
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Use new libtool syntax and silent-rules to silent
the build output a bit (linux-like)
|
|
Now that the INSTALL file is generated.
Allows running make maintainer-clean.
|
|
Automake 'foreign' option is specified in configure.ac.
Remove from Makefile.am
|
|
Add missing INSTALL file. Use standard GNU file on building tarball
README may have been updated
Remove AUTHORS file as it is empty and no content available yet.
Remove NEWS file as it is empty and no content available yet.
|
|
The git generated ChangeLog replaces the hand written one.
Update configure.ac to xorg-macros level 1.3.
Use XORG_DEFAULT_OPTIONS which replaces four XORG_* macros
Update Makefile.am to add ChangeLog target if missing
Remove ChangeLog from EXTRA_DIST or *CLEAN variables
This is a pre-req for the INSTALL_CMD
|
|
|
|
Otherwise make distcheck fails.
|
|
These new files don't do us much good if we don't distribute them in
our releases.
|
|
|
|
|
|
This disables UXA and DRM modesetting pre-1.5, due to privates handling
issues.
|
|
This eliminates the cost of EXA migration management while providing full
pixmap allocation control to the driver. The goal is to make something
useful for UMA drivers.
|
|
|
|
|
|
system to build the README file at make dist time
- in util/macros/xorg-macros.m4, add a new XORG_CHECK_LINUXDOC macro that
will check if the required tools and files exist, and if so set a
conditional.
- util/modular/symlink.sh
- Link all the <driver>.sgml to xf86-video-<driver>/README.sgml
- Add all the README.<driver> to the list of excluded files
- xc/programs/Xserver/hw/xfree86/doc/sgml/SiS.sgml: Various changes
to make it spew less warnings when the text file is built.
|
|
|