| Age | Commit message (Collapse) | Author |
|---|
|
Added one configuration option --enable-glamor to control
whether use glamor. Added one new file intel_glamor.c to
wrap glamor egl API for intel driver's usage.
This commit doesn't really change the driver's control path.
It just adds necessary files for glamor and change some
configuration.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Zhigang Gong <zhigang.gong@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Sandybdrige requires an elaborate dance to flush caches without
hanging the gpu. See public docs Vol2Part1 1.7.4.1 PIPE_CONTROL
or the corrensponding code in mesa/kernel.
This (together with the corresponding patch for the kernel) seems to
fix the hangs in cairo-perf-traces I'm seeing on my snb machine.
v2: Incorporate review from Chris Wilson. For paranoia keep all three
PIPE_CONTROL cmds in the same batchbuffer to avoid upsetting the gpu.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
By popular demand.
Triple-buffering trade-offs output latency versus jitter. By having a
pre-rendered frame ready to swap in following a pageflip, we avoid the
scenario where the latency between receiving the flip complete signal
from the kernel, waking up the vsynced application, it render the new
frame and then for the server to process the swap request is greater
than the frame interval, causing us to miss the vblank. The result is
that application can become frame-locked to 30fps. Instead, we report to
the application that the first frame swap is immediately completed,
supply a new back buffer (or else the rendering would be blocked on
waiting for the front-buffer to be swapped away from the scanout) and
let them proceed to render the second frame. The second frame is added
to the swap queue, and the client throttled to vrefresh. (If the client
missed the vblank, the swap queue is empty and the client is immediately
woken again, whilst the pageflip is pending.)
Note, for practical reasons this only applies to page-flipping, for
example, calls to glXSwapBuffer() on fullscreen applications.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
I'd like it to not be in the SDK anymore, and we're not using anything
from it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Still need to handle video and gamma correction, but this gets the
display up and running at 30 bit depth if the kernel and display support
it.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
As fullscreen swaps were going via a different path to the swapping of
ordinary windows, we were no longer honouring the xorg.conf option to
disable swapbuffer waiting.
This changes the code to only use pageflipping if the Option
"SwapbuffersWait" is set to "TRUE" (default).
Jesse's comment was that this should be superseded by actually
supporting asynchronous page flips. As we are missing kernel and dix level
support for that, in the meantime honour the config option.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Kristian Høgsberg <krh@bitplanet.net>
|
|
There are still too many unresolved bugs, typically GPU hangs, that are
related to using relaxed fencing (i.e. only allocating the minimal
amount of memory required for a buffer) on older hardware, so turn off
the feature by default for the release.
Reported-and-tested-by: Knut Petersen <Knut_Petersen@t-online.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36147
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Daniel Vetter pointed out that the automagic flush by the kernel for the
busy-ioctl was only introduced upstream in 2.6.37. So we still need to
manually emit a flush on old kernels.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Rather than just creating and submitting a batch that simply contains a
flush in order to periodically ensure that rendering reaches the
scanout, we can simply ask the kernel whether the scanout is busy. The
kernel will then submit a flush on our behalf if it is dirty, which
takes advantage of the kernel's dirty state tracking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
The kernel will emit any required flushes between the dri client and the
ddx, and we do not rely on the MI_FLUSH here for scanout.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
So that you can indeed allocate a linear framebuffer if you so desire
without breaking mesa.
Adds:
Section "Driver"
Option "LinearFramebuffer" "False|True" # default false
EndSection
to xorg.conf
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
These have been made obsolete by KMS and GEM.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
As we know the maximum length of the string, we can replace our single
usage of XNFprintf with snprintf.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Reported-by: György Balló <ballogy@freestart.hu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32482
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
This is known to lock up the GPU even with the workaround in place.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31773
Signed-off-by: Matthias Hopf <mhopf@suse.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
This pair of chipsets seem broken beyond repair, specifically the
erratum that causes the wrong PTE entry to be invalidated, so disable
our incorrect attempts to use the BLT on those devices.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
If we attempt to emit BLT batches without kernel support, we just end up
with EINVAL and no rendering. Prevent this, and avoid uncached
rendering, by restoring the shadow fallback paths if there is no BLT
support.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
This is a holdover from early GEM work when we weren't syncing on the
DRI client side. It would keep clients from getting too far ahead and
killing their interactivity, by bringing everyone to a halt when
anyone was too far ahead.
Now, GL clients throttle themselves to avoid the problem, and it turns
out that in the case that they don't (long rendering to buffers with
no swap), this actually reduces X Server interactivity: instead of
lagging of X rendering behind input, you get no response for seconds
at a time, then a burst of rendering, then nothing again.
Reported by ajax. Tested with moving a window while running
cairo-perf-trace on the GL backend (improvement) and X backend (no
significant change in responsiveness).
|
|
Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
This connects the kernel uevent indicating monitor hotplugging to the
RandR notification events so that X applications can be notified
automatically when monitors are connected or disconnected.
This also adds a configuration option to disable hotplug events.
V2: missed a #ifdef HAVE_UDEV around some udev-specific declarations
V3: document Hotplug option in man page
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
SandyBridge 2D support is far from complete, so instead of
permanently falling back and always using uncached GTT mapping for
rendering, use the shadow buffer instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
To enable DRI we create GEM buffers for the client to render into with
hardware acceleration. In order to maintain coherency between any 2D
render operations with the independent 3D clients (this includes the
reading of 2D rasterisation by the direct rendering client, e.g.
compiz using texture_from_pixmap) we need to replace the shadow pixmap
with the GTT mapping. Therefore 2D rendering to a DRI buffer will be to
uncached memory and thus penalised -- but the direct rendering clients
will have full hardware acceleration.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
By returning FALSE whilst probing if we can't find a KMS driver, we
allow X to fallback to trying the VESA driver -- rather than failing.
The initial idea for this was by Julien Cristau.
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Sandybridge requires kind of buffer must be tiling, like depth.
And we would or have all tiling cases handled fine. So not allow
user to turn off tiling on Sandybridge+ may be fine.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
If we force fallbacks, then we will only create pixmaps in system
memory, preventing DRI2 from passing valid bo names to the clients. In
this case, they will just fallback to swrast. If we disable DRI2 after
forcing fallbacks (e.g. regenerating after a GPU hang or explicitly
disabled with the shadow buffer) then it is simpler just to disable the
extension and allow mesa to use pure swrast.
Reported-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
MI_LOAD_SCAN_LINE_INCL command is not available on sandybridge.
I haven't got reply on any substitution for it, so turn it off for now.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
This is a slightly less risky strategy than having to remember to update
all pointers to the old Screen pixmap.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
An attempt to workaround the incoherency in gen2 chipsets, we avoid
using dynamic reallocation as much as possible.
The first step is to disable allocation of pixmaps using GEM and simply
create them in system memory without a backing buffer object. This
forces all rendering to use S/W fallbacks.
The second step is to allocate a shadow front buffer and assign that to
the Screen pixmap. This ensure that the front buffer remains in the GTT
and pinned for scanout. The shadow buffer will be rendered to in the
normal fashion via the Screen pixmap, and be marked dirty. In the block
handler, the dirty shadow buffer is then blitted (using the GPU) over
the front buffer. This should completely avoid having to move pages
around in the GTT and avoid incurring the wrath of those early chipsets.
Secondly, performance should be reasonable as we avoid the ping-pong
caused by the small aperture and weak GPU forcing software fallbacks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
During -configure we would attempt to query the availablility of KMS
before the DRI module was loaded, thus we were unable to create a valid
bus identifier and so the query failed and we disowned the device.
Fixes:
Bug 29611 - Xorg -configure fails
https://bugs.freedesktop.org/show_bug.cgi?id=29611
Reported-by: Sergey Samokhin <prikrutil@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Marty Jack reported an issue he found where the page-flipping handler
was being lost on server reset. This results in the swap completion
notification being lost, with the sporadic hang of full screen
applications like Compiz, flash and even glxgears!
Fixes:
Bug 29584 - Server in compute loop
https://bugs.freedesktop.org/show_bug.cgi?id=29584
There are also several possibly related bugs with similar symptoms, i.e.
OpenGL applications hanging on missed swap notifications.
Reported-by: Marty Jack <martyj19@comcast.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Keith Packard <keithp@keithp.com>
|
|
And fixup all the drmmode_* functions to have an intel prefix and
categorise those into intel_mode, intel_crtc, intel_output and
intel_property so that the functions are a little more self-descriptive
and, more importantly, are consistent.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
There are a few cases where the server will flush client output buffers
but our block handler only catches the most common (before going into select).
If the server flushes client buffers before we submit our batch buffer,
the client may receive a damage event for rendering that hasn't happened yet.
Instead, we can hook into the flush callback chain, which the server will
invoke just before flushing output. This lets us submit batch buffers
before sending out events, preserving ordering.
Fixes 28438: [bisected] incorrect character in gnome-terminal under compiz
https://bugs.freedesktop.org/show_bug.cgi?id=28438
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
In order to cleanup all CRTCs and outputs on shutdown, we need to keep a
list of the individual structures and iterate over that list on
shutdown.
Also, the output and crtcs are configured just once and not for each
screen generation so move the shutdown to the termination and not on
CloseScreen. Oops.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Should fix:
Bug 26946 - CRTC cursor BO leak in 2D
https://bugs.freedesktop.org/show_bug.cgi?id=26946
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
After splitting out the i810 driver into its own legacy directory, we
can identify the common routines not as i830 but as intel. This
clarifies the code which *is* i830 specific.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
