From 223944878cf38f86580df5a7d3102d86cfc061b9 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Tue, 20 Mar 2007 14:33:53 -0700
Subject: Attempt to fix single/dual-channel issues on i9xx LVDS panels.

- Use the existing single/dual-channel state when available, as changing it
  doesn't appear to work out.
- Set the power state of the CLKB and B0-B3 pairs according to whether
  choose to go dual-channel or not.
- Restore the LVDS register at the appropriate point (before DPLLs are
  re-programmed.
---
 src/i810_reg.h | 50 ++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 48 insertions(+), 2 deletions(-)

(limited to 'src/i810_reg.h')

diff --git a/src/i810_reg.h b/src/i810_reg.h
index d63be025..4c6e582e 100644
--- a/src/i810_reg.h
+++ b/src/i810_reg.h
@@ -1128,11 +1128,57 @@ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 #define DVO_SRCDIM_HORIZONTAL_SHIFT	12
 #define DVO_SRCDIM_VERTICAL_SHIFT	0
 
+/** @defgroup LVDS
+ * @{
+ */
+/**
+ * This register controls the LVDS output enable, pipe selection, and data
+ * format selection.
+ *
+ * All of the clock/data pairs are force powered down by power sequencing.
+ */
 #define LVDS			0x61180
+/**
+ * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
+ * the DPLL semantics change when the LVDS is assigned to that pipe.
+ */
 # define LVDS_PORT_EN			(1 << 31)
+/** Selects pipe B for LVDS data.  Must be set on pre-965. */
 # define LVDS_PIPEB_SELECT		(1 << 30)
-# define LVDS_CLKA_POWER_DOWN		(0 << 8)
-# define LVDS_CLKA_POWER_UP		(3 << 8)
+
+/**
+ * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
+ * pixel.
+ */
+# define LVDS_A0A2_CLKA_POWER_MASK	(3 << 8)
+# define LVDS_A0A2_CLKA_POWER_DOWN	(0 << 8)
+# define LVDS_A0A2_CLKA_POWER_UP	(3 << 8)
+/**
+ * Controls the A3 data pair, which contains the additional LSBs for 24 bit
+ * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
+ * on.
+ */
+# define LVDS_A3_POWER_MASK		(3 << 6)
+# define LVDS_A3_POWER_DOWN		(0 << 6)
+# define LVDS_A3_POWER_UP		(3 << 6)
+/**
+ * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
+ * is set.
+ */
+# define LVDS_CLKB_POWER_MASK		(3 << 4)
+# define LVDS_CLKB_POWER_DOWN		(0 << 4)
+# define LVDS_CLKB_POWER_UP		(3 << 4)
+
+/**
+ * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
+ * setting for whether we are in dual-channel mode.  The B3 pair will
+ * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ */
+# define LVDS_B0B3_POWER_MASK		(3 << 2)
+# define LVDS_B0B3_POWER_DOWN		(0 << 2)
+# define LVDS_B0B3_POWER_UP		(3 << 2)
+
+/** @} */
 
 /** @defgroup TV_CTL
  * @{
-- 
cgit v1.2.3