/* * Copyright © 2006 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * Authors: * Eric Anholt * */ #ifndef _I830_BIOS_H_ #define _I830_BIOS_H_ #include #ifndef REG_DUMPER #include #endif struct vbt_header { char signature[20]; /**< Always starts with 'VBT$' */ uint16_t version; /**< decimal */ uint16_t header_size; /**< in bytes */ uint16_t vbt_size; /**< in bytes */ uint8_t vbt_checksum; uint8_t reserved0; uint32_t bdb_offset; /**< from beginning of VBT */ uint32_t aim_offset[4]; /**< from beginning of VBT */ } __attribute__ ((packed)); struct bdb_header { char signature[16]; /**< Always 'BIOS_DATA_BLOCK' */ uint16_t version; /**< decimal */ uint16_t header_size; /**< in bytes */ uint16_t bdb_size; /**< in bytes */ } __attribute__ ((packed)); /* * There are several types of BIOS data blocks (BDBs), each block has * an ID and size in the first 3 bytes (ID in first, size in next 2). * Known types are listed below. */ #define BDB_GENERAL_FEATURES 1 #define BDB_GENERAL_DEFINITIONS 2 #define BDB_OLD_TOGGLE_LIST 3 #define BDB_MODE_SUPPORT_LIST 4 #define BDB_GENERIC_MODE_TABLE 5 #define BDB_EXT_MMIO_REGS 6 #define BDB_SWF_IO 7 #define BDB_SWF_MMIO 8 #define BDB_DOT_CLOCK_TABLE 9 #define BDB_MODE_REMOVAL_TABLE 10 #define BDB_CHILD_DEVICE_TABLE 11 #define BDB_DRIVER_FEATURES 12 #define BDB_DRIVER_PERSISTENCE 13 #define BDB_EXT_TABLE_PTRS 14 #define BDB_DOT_CLOCK_OVERRIDE 15 #define BDB_DISPLAY_SELECT 16 /* 17 rsvd */ #define BDB_DRIVER_ROTATION 18 #define BDB_DISPLAY_REMOVE 19 #define BDB_OEM_CUSTOM 20 #define BDB_EFP_LIST 21 /* workarounds for VGA hsync/vsync */ #define BDB_SDVO_LVDS_OPTIONS 22 #define BDB_SDVO_PANEL_DTDS 23 #define BDB_SDVO_LVDS_PNP_IDS 24 #define BDB_SDVO_LVDS_POWER_SEQ 25 #define BDB_TV_OPTIONS 26 #define BDB_LVDS_OPTIONS 40 #define BDB_LVDS_LFP_DATA_PTRS 41 #define BDB_LVDS_LFP_DATA 42 #define BDB_LVDS_BACKLIGHT 43 #define BDB_LVDS_POWER 44 #define BDB_SKIP 254 /* VBIOS private block, ignore */ struct bdb_general_features { /* bits 1 */ unsigned char panel_fitting:2; unsigned char flexaim:1; unsigned char msg_enable:1; unsigned char clear_screen:3; unsigned char color_flip:1; /* bits 2 */ unsigned char download_ext_vbt:1; unsigned char enable_ssc:1; unsigned char ssc_freq:1; unsigned char enable_lfp_on_override:1; unsigned char disable_ssc_ddt:1; unsigned char rsvd8:3; /* finish byte */ /* bits 3 */ unsigned char disable_smooth_vision:1; unsigned char single_dvi:1; unsigned char rsvd9:6; /* finish byte */ /* bits 4 */ unsigned char legacy_monitor_detect; /* bits 5 */ unsigned char int_crt_support:1; unsigned char int_tv_support:1; unsigned char rsvd11:6; /* finish byte */ } __attribute__ ((packed)); #define GPIO_PIN_NONE 0x00 /* "N/A" */ #define GPIO_PIN_I2C 0x01 /* "I2C GPIO pins" */ #define GPIO_PIN_CRT_DDC 0x02 /* "Analog CRT DDC GPIO pins" */ /* 915+ */ #define GPIO_PIN_LVDS 0x03 /* "Integrated LVDS DDC GPIO pins" */ #define GPIO_PIN_SDVO_I2C 0x05 /* "sDVO I2C GPIO pins" */ #define GPIO_PIN_SDVO_DDC1 0x1D /* "SDVO DDC1 GPIO pins" */ #define GPIO_PIN_SDVO_DDC2 0x2D /* "SDVO DDC2 GPIO pins" */ /* pre-915 */ #define GPIO_PIN_DVI_LVDS 0x03 /* "DVI/LVDS DDC GPIO pins" */ #define GPIO_PIN_ADD_I2C 0x05 /* "ADDCARD I2C GPIO pins" */ #define GPIO_PIN_ADD_DDC 0x04 /* "ADDCARD DDC GPIO pins" */ #define GPIO_PIN_ADD_DDC_I2C 0x06 /* "ADDCARD DDC/I2C GPIO pins" */ /* Pre 915 */ #define DEVICE_TYPE_NONE 0x00 #define DEVICE_TYPE_CRT 0x01 #define DEVICE_TYPE_TV 0x09 #define DEVICE_TYPE_EFP 0x12 #define DEVICE_TYPE_LFP 0x22 /* On 915+ */ #define DEVICE_TYPE_CRT_DPMS 0x6001 #define DEVICE_TYPE_CRT_DPMS_HOTPLUG 0x4001 #define DEVICE_TYPE_TV_COMPOSITE 0x0209 #define DEVICE_TYPE_TV_MACROVISION 0x0289 #define DEVICE_TYPE_TV_RF_COMPOSITE 0x020c #define DEVICE_TYPE_TV_SVIDEO_COMPOSITE 0x0609 #define DEVICE_TYPE_TV_SCART 0x0209 #define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009 #define DEVICE_TYPE_EFP_HOTPLUG_PWR 0x6012 #define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR 0x6052 #define DEVICE_TYPE_EFP_DVI_I 0x6053 #define DEVICE_TYPE_EFP_DVI_D_DUAL 0x6152 #define DEVICE_TYPE_EFP_DVI_D_HDCP 0x60d2 #define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR 0x6062 #define DEVICE_TYPE_OPENLDI_DUALPIX 0x6162 #define DEVICE_TYPE_LFP_PANELLINK 0x5012 #define DEVICE_TYPE_LFP_CMOS_PWR 0x5042 #define DEVICE_TYPE_LFP_LVDS_PWR 0x5062 #define DEVICE_TYPE_LFP_LVDS_DUAL 0x5162 #define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP 0x51e2 #define DEVICE_CFG_NONE 0x00 #define DEVICE_CFG_12BIT_DVOB 0x01 #define DEVICE_CFG_12BIT_DVOC 0x02 #define DEVICE_CFG_24BIT_DVOBC 0x09 #define DEVICE_CFG_24BIT_DVOCB 0x0a #define DEVICE_CFG_DUAL_DVOB 0x11 #define DEVICE_CFG_DUAL_DVOC 0x12 #define DEVICE_CFG_DUAL_DVOBC 0x13 #define DEVICE_CFG_DUAL_LINK_DVOBC 0x19 #define DEVICE_CFG_DUAL_LINK_DVOCB 0x1a #define DEVICE_WIRE_NONE 0x00 #define DEVICE_WIRE_DVOB 0x01 #define DEVICE_WIRE_DVOC 0x02 #define DEVICE_WIRE_DVOBC 0x03 #define DEVICE_WIRE_DVOBB 0x05 #define DEVICE_WIRE_DVOCC 0x06 #define DEVICE_WIRE_DVOB_MASTER 0x0d #define DEVICE_WIRE_DVOC_MASTER 0x0e #define DEVICE_PORT_DVOA 0x00 /* none on 845+ */ #define DEVICE_PORT_DVOB 0x01 #define DEVICE_PORT_DVOC 0x02 struct child_device_config { uint16_t handle; uint16_t device_type; /* See DEVICE_TYPE_* above */ uint8_t device_id[10]; uint16_t addin_offset; uint8_t dvo_port; /* See DEVICE_PORT_* above */ uint8_t i2c_pin; uint8_t slave_addr; uint8_t ddc_pin; uint16_t edid_ptr; uint8_t dvo_cfg; /* See DEVICE_CFG_* above */ uint8_t dvo2_port; uint8_t i2c2_pin; uint8_t slave2_addr; uint8_t ddc2_pin; uint8_t capabilities; uint8_t dvo_wiring; /* See DEVICE_WIRE_* above */ uint8_t dvo2_wiring; uint16_t extended_type; uint8_t dvo_function; } __attribute__ ((packed)); struct bdb_general_definitions { unsigned char crt_ddc_gmbus_pin; /* see GPIO_PIN_* above */ /* DPMS bits */ unsigned char dpms_acpi:1; unsigned char skip_boot_crt_detect:1; unsigned char dpms_aim:1; unsigned char rsvd1:5; /* finish byte */ /* boot device bits */ unsigned char boot_display[2]; unsigned char child_dev_size; /* * Device info: * If TV is present, it'll be at devices[0] * LVDS will be next, either devices[0] or [1], if present * Max total will be 6, but could be as few as 4 if both * TV and LVDS are missing, so be careful when interpreting * [4] and [5]. */ struct child_device_config devices[0]; /* may be another device block here on some platforms */ } __attribute__ ((packed)); #define DEVICE_CHILD_SIZE 7 struct bdb_child_devices { uint8_t child_structure_size; struct child_device_config children[DEVICE_CHILD_SIZE]; } __attribute__ ((packed)); struct bdb_lvds_options { uint8_t panel_type; uint8_t rsvd1; /* LVDS capabilities, stored in a dword */ uint8_t pfit_mode:2; uint8_t pfit_text_mode_enhanced:1; uint8_t pfit_gfx_mode_enhanced:1; uint8_t pfit_ratio_auto:1; uint8_t pixel_dither:1; uint8_t lvds_edid:1; uint8_t rsvd2:1; uint8_t rsvd4; } __attribute__ ((packed)); /* 915+ only */ struct bdb_tv_features { /* need to verify bit ordering */ uint16_t under_over_scan_via_yprpb:2; uint16_t rsvd1:10; uint16_t under_over_scan_via_dvi:2; uint16_t add_overscan_mode:1; uint16_t rsvd2:1; } __attribute__ ((packed)); struct lvds_fp_timing { uint16_t x_res; uint16_t y_res; uint32_t lvds_reg; uint32_t lvds_reg_val; uint32_t pp_on_reg; uint32_t pp_on_reg_val; uint32_t pp_off_reg; uint32_t pp_off_reg_val; uint32_t pp_cycle_reg; uint32_t pp_cycle_reg_val; uint32_t pfit_reg; uint32_t pfit_reg_val; uint16_t terminator; } __attribute__ ((packed)); struct lvds_dvo_timing { uint16_t dclk; /**< In 10khz */ uint8_t hactive; uint8_t hblank; uint8_t high_h; /**< 7:4 = hactive 11:8, 3:0 = hblank 11:8 */ uint8_t vactive; uint8_t vblank; uint8_t high_v; /**< 7:4 = vactive 11:8, 3:0 = vblank 11:8 */ uint8_t hsync_off; uint8_t hsync_pulse_width; uint8_t vsync_off; uint8_t high_hsync_off; /**< 7:6 = hsync off 9:8 */ uint8_t h_image; uint8_t v_image; uint8_t max_hv; uint8_t h_border; uint8_t v_border; uint8_t flags; } __attribute__ ((packed)); struct lvds_pnp_id { uint16_t mfg_name; uint16_t product_code; uint32_t serial; uint8_t mfg_week; uint8_t mfg_year; } __attribute__ ((packed));; /* LFP pointer table contains entries to the struct below */ struct bdb_lvds_lfp_data_ptr { uint16_t fp_timing_offset; /* offsets are from start of bdb */ uint8_t fp_table_size; uint16_t dvo_timing_offset; uint8_t dvo_table_size; uint16_t panel_pnp_id_offset; uint8_t pnp_table_size; } __attribute__ ((packed)); struct bdb_lvds_lfp_data_ptrs { uint8_t lvds_entries; struct bdb_lvds_lfp_data_ptr ptr[16]; } __attribute__ ((packed)); struct bdb_lvds_lfp_data_entry { struct lvds_fp_timing fp_timing; struct lvds_dvo_timing dvo_timing; struct lvds_pnp_id pnp_id; } __attribute__ ((packed)); struct bdb_lvds_lfp_data { struct bdb_lvds_lfp_data_entry data[16]; } __attribute__ ((packed)); #define BACKLIGHT_TYPE_NONE 0 #define BACKLIGHT_TYPE_I2C 1 #define BACKLIGHT_TYPE_PWM 2 #define BACKLIGHT_GMBUS_100KHZ 0 #define BACKLIGHT_GMBUS_50KHZ 1 #define BACKLIGHT_GMBUS_400KHZ 2 #define BACKLIGHT_GMBUS_1MHZ 3 struct backlight_info { uint8_t inverter_type:2; /* see BACKLIGHT_TYPE_* above */ uint8_t inverter_polarity:1; /* 1 means 0 is max, 255 is min */ uint8_t gpio_pins:3; /* see GPIO_PIN_* above */ uint8_t gmbus_speed:2; uint16_t pwm_frequency; /* in Hz */ uint8_t min_brightness; /* Next two are only for 915+ systems */ uint8_t i2c_addr; uint8_t i2c_cmd; } __attribute((packed)); struct bdb_backlight_control { uint8_t row_size; struct backlight_info lfps[16]; } __attribute__ ((packed)); struct bdb_bia { uint8_t bia_enable:1; uint8_t bia_level:3; uint8_t rsvd1:3; uint8_t als_enable:1; uint8_t als_response_data[20]; } __attribute((packed)); struct aimdb_header { char signature[16]; char oem_device[20]; uint16_t aimdb_version; uint16_t aimdb_header_size; uint16_t aimdb_size; } __attribute__ ((packed)); struct aimdb_block { uint8_t aimdb_id; uint16_t aimdb_size; } __attribute__ ((packed)); struct vch_panel_data { uint16_t fp_timing_offset; uint8_t fp_timing_size; uint16_t dvo_timing_offset; uint8_t dvo_timing_size; uint16_t text_fitting_offset; uint8_t text_fitting_size; uint16_t graphics_fitting_offset; uint8_t graphics_fitting_size; } __attribute__ ((packed)); struct vch_bdb_22 { struct aimdb_block aimdb_block; struct vch_panel_data panels[16]; } __attribute__ ((packed)); #define BLC_INVERTER_TYPE_NONE 0 #define BLC_INVERTER_TYPE_I2C 1 #define BLC_INVERTER_TYPE_PWM 2 #define BLC_GPIO_NONE 0 #define BLC_GPIO_I2C 1 #define BLC_GPIO_CRT_DDC 2 #define BLC_GPIO_DVI_DDC 3 #define BLC_GPIO_SDVO_I2C 5 struct blc_struct { uint8_t inverter_type:2; uint8_t inverter_polarity:1; /* 1 means inverted (0 = max brightness) */ uint8_t gpio_pins:3; uint8_t gmbus_speed:2; uint16_t pwm_freq; /* in Hz */ uint8_t min_brightness; /* (0-255) */ uint8_t i2c_slave_addr; uint8_t i2c_cmd; } __attribute__ ((packed)); struct bdb_lvds_backlight { uint8_t blcstruct_size; struct blc_struct panels[16]; } __attribute__ ((packed)); struct bdb_lvds_power { uint8_t dpst_enabled:1; uint8_t pwr_prefs:3; uint8_t rsvd1:3; uint8_t als_enabled:1; uint16_t als_backlight1; uint16_t als_backlight2; uint16_t als_backlight3; uint16_t als_backlight4; uint16_t als_backlight5; } __attribute__ ((packed)); #define BDB_DRIVER_NO_LVDS 0 #define BDB_DRIVER_INT_LVDS 1 #define BDB_DRIVER_SDVO_LVDS 2 #define BDB_DRIVER_EDP 3 struct bdb_driver_feature { uint8_t boot_dev_algorithm:1; uint8_t block_display_switch:1; uint8_t allow_display_switch:1; uint8_t hotplug_dvo:1; uint8_t dual_view_zoom:1; uint8_t int15h_hook:1; uint8_t sprite_in_clone:1; uint8_t primary_lfp_id:1; uint16_t boot_mode_x; uint16_t boot_mode_y; uint8_t boot_mode_bpp; uint8_t boot_mode_refresh; uint16_t enable_lfp_primary:1; uint16_t selective_mode_pruning:1; uint16_t dual_frequency:1; uint16_t render_clock_freq:1; /* 0: high freq; 1: low freq */ uint16_t nt_clone_support:1; uint16_t power_scheme_ui:1; /* 0: CUI; 1: 3rd party */ uint16_t sprite_display_assign:1; /* 0: secondary; 1: primary */ uint16_t cui_aspect_scaling:1; uint16_t preserve_aspect_ratio:1; uint16_t sdvo_device_power_down:1; uint16_t crt_hotplug:1; uint16_t lvds_config:2; uint16_t reserved:3; uint8_t static_display:1; uint8_t reserved2:7; uint16_t legacy_crt_max_x; uint16_t legacy_crt_max_y; uint8_t legacy_crt_max_refresh; } __attribute__ ((packed)); struct bdb_sdvo_lvds_options { uint8_t panel_backlight; uint8_t h40_set_panel_type; uint8_t panel_type; uint8_t ssc_clk_freq; uint16_t als_low_trip; uint16_t als_high_trip; uint8_t sclalarcoeff_tab_row_num; uint8_t sclalarcoeff_tab_row_size; uint8_t coefficient[8]; uint8_t panel_misc_bits_1; uint8_t panel_misc_bits_2; uint8_t panel_misc_bits_3; uint8_t panel_misc_bits_4; } __attribute__ ((packed)); #ifndef REG_DUMPER int i830_bios_init(ScrnInfoPtr scrn); #endif /* * Driver<->VBIOS interaction occurs through scratch bits in * GR18 & SWF*. * * The VBIOS/firmware will signal to the gfx driver through the ASLE interrupt * (visible in the interupt regs at bit 0) when it wants something done. * * Pre-965: * The gfx driver can make calls to the VBIOS/firmware through an SMI request, * generated by writing to offset 0xe0 of the device's config space (see the * publically available 915 PRM for details). * * 965 and above: * IGD OpRegion requests to the VBIOS/firmware are made using SWSCI, which can * be triggered by writing to offset 0xe4 (see the publically available * 965 graphics PRM for details). */ /* GR18 bits are set on display switch and hotkey events */ #define GR18_DRIVER_SWITCH_EN (1<<7) /* 0: VBIOS control, 1: driver control */ #define GR18_HOTKEY_MASK 0x78 /* See also SWF4 15:0 */ #define GR18_HK_NONE (0x0<<3) #define GR18_HK_LFP_STRETCH (0x1<<3) #define GR18_HK_TOGGLE_DISP (0x2<<3) #define GR18_HK_DISP_SWITCH (0x4<<3) /* see SWF14 15:0 for what to enable */ #define GR18_HK_POPUP_DISABLED (0x6<<3) #define GR18_HK_POPUP_ENABLED (0x7<<3) #define GR18_HK_PFIT (0x8<<3) #define GR18_HK_APM_CHANGE (0xa<<3) #define GR18_HK_MULTIPLE (0xc<<3) #define GR18_USER_INT_EN (1<<2) #define GR18_A0000_FLUSH_EN (1<<1) #define GR18_SMM_EN (1<<0) /* Set by driver, cleared by VBIOS */ #define SWF00_YRES_SHIFT 16 #define SWF00_XRES_SHIFT 0 #define SWF00_RES_MASK 0xffff /* Set by VBIOS at boot time and driver at runtime */ #define SWF01_TV2_FORMAT_SHIFT 8 #define SWF01_TV1_FORMAT_SHIFT 0 #define SWF01_TV_FORMAT_MASK 0xffff #define SWF10_VBIOS_BLC_I2C_EN (1<<29) #define SWF10_GTT_OVERRIDE_EN (1<<28) #define SWF10_LFP_DPMS_OVR (1<<27) /* override DPMS on display switch */ #define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24) #define SWF10_OLD_TOGGLE 0x0 #define SWF10_TOGGLE_LIST_1 0x1 #define SWF10_TOGGLE_LIST_2 0x2 #define SWF10_TOGGLE_LIST_3 0x3 #define SWF10_TOGGLE_LIST_4 0x4 #define SWF10_PANNING_EN (1<<23) #define SWF10_DRIVER_LOADED (1<<22) #define SWF10_EXTENDED_DESKTOP (1<<21) #define SWF10_EXCLUSIVE_MODE (1<<20) #define SWF10_OVERLAY_EN (1<<19) #define SWF10_PLANEB_HOLDOFF (1<<18) #define SWF10_PLANEA_HOLDOFF (1<<17) #define SWF10_VGA_HOLDOFF (1<<16) #define SWF10_ACTIVE_DISP_MASK 0xffff #define SWF10_PIPEB_LFP2 (1<<15) #define SWF10_PIPEB_EFP2 (1<<14) #define SWF10_PIPEB_TV2 (1<<13) #define SWF10_PIPEB_CRT2 (1<<12) #define SWF10_PIPEB_LFP (1<<11) #define SWF10_PIPEB_EFP (1<<10) #define SWF10_PIPEB_TV (1<<9) #define SWF10_PIPEB_CRT (1<<8) #define SWF10_PIPEA_LFP2 (1<<7) #define SWF10_PIPEA_EFP2 (1<<6) #define SWF10_PIPEA_TV2 (1<<5) #define SWF10_PIPEA_CRT2 (1<<4) #define SWF10_PIPEA_LFP (1<<3) #define SWF10_PIPEA_EFP (1<<2) #define SWF10_PIPEA_TV (1<<1) #define SWF10_PIPEA_CRT (1<<0) #define SWF11_MEMORY_SIZE_SHIFT 16 #define SWF11_SV_TEST_EN (1<<15) #define SWF11_IS_AGP (1<<14) #define SWF11_DISPLAY_HOLDOFF (1<<13) #define SWF11_DPMS_REDUCED (1<<12) #define SWF11_IS_VBE_MODE (1<<11) #define SWF11_PIPEB_ACCESS (1<<10) /* 0 here means pipe a */ #define SWF11_DPMS_MASK 0x07 #define SWF11_DPMS_OFF (1<<2) #define SWF11_DPMS_SUSPEND (1<<1) #define SWF11_DPMS_STANDBY (1<<0) #define SWF11_DPMS_ON 0 #define SWF14_GFX_PFIT_EN (1<<31) #define SWF14_TEXT_PFIT_EN (1<<30) #define SWF14_LID_SWITCH_EN (1<<29) #define SWF14_POPUP_EN (1<<28) #define SWF14_DISPLAY_HOLDOFF (1<<27) #define SWF14_DISP_DETECT_EN (1<<26) #define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */ #define SWF14_DRIVER_STATUS (1<<24) #define SWF14_OS_TYPE_WIN9X (1<<23) #define SWF14_OS_TYPE_WINNT (1<<22) /* 21:19 rsvd */ #define SWF14_PM_TYPE_MASK 0x00070000 #define SWF14_PM_ACPI_VIDEO (0x4 << 16) #define SWF14_PM_ACPI (0x3 << 16) #define SWF14_PM_APM_12 (0x2 << 16) #define SWF14_PM_APM_11 (0x1 << 16) #define SWF14_HK_REQUEST_MASK 0x0000ffff /* see GR18 6:3 for event type */ /* if GR18 indicates a display switch */ #define SWF14_DS_PIPEB_LFP2_EN (1<<15) #define SWF14_DS_PIPEB_EFP2_EN (1<<14) #define SWF14_DS_PIPEB_TV2_EN (1<<13) #define SWF14_DS_PIPEB_CRT2_EN (1<<12) #define SWF14_DS_PIPEB_LFP_EN (1<<11) #define SWF14_DS_PIPEB_EFP_EN (1<<10) #define SWF14_DS_PIPEB_TV_EN (1<<9) #define SWF14_DS_PIPEB_CRT_EN (1<<8) #define SWF14_DS_PIPEA_LFP2_EN (1<<7) #define SWF14_DS_PIPEA_EFP2_EN (1<<6) #define SWF14_DS_PIPEA_TV2_EN (1<<5) #define SWF14_DS_PIPEA_CRT2_EN (1<<4) #define SWF14_DS_PIPEA_LFP_EN (1<<3) #define SWF14_DS_PIPEA_EFP_EN (1<<2) #define SWF14_DS_PIPEA_TV_EN (1<<1) #define SWF14_DS_PIPEA_CRT_EN (1<<0) /* if GR18 indicates a panel fitting request */ #define SWF14_PFIT_EN (1<<0) /* 0 means disable */ /* if GR18 indicates an APM change request */ #define SWF14_APM_HIBERNATE 0x4 #define SWF14_APM_SUSPEND 0x3 #define SWF14_APM_STANDBY 0x1 #define SWF14_APM_RESTORE 0x0 #endif /* _I830_BIOS_H_ */