/* -*- c-basic-offset: 4 -*- */ /* * Copyright © 2006 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * Authors: * Eric Anholt * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include #include #include #include "xf86.h" #include "i830.h" #include "i830_bios.h" #include "i830_display.h" #include "i830_debug.h" #include "xf86Modes.h" typedef struct { /* given values */ int n; int m1, m2; int p1, p2; /* derived values */ int dot; int vco; int m; int p; } intel_clock_t; typedef struct { int min, max; } intel_range_t; typedef struct { int dot_limit; int p2_slow, p2_fast; } intel_p2_t; #define INTEL_P2_NUM 2 typedef struct { intel_range_t dot, vco, n, m, m1, m2, p, p1; intel_p2_t p2; } intel_limit_t; #define I8XX_DOT_MIN 25000 #define I8XX_DOT_MAX 350000 #define I8XX_VCO_MIN 930000 #define I8XX_VCO_MAX 1400000 #define I8XX_N_MIN 3 #define I8XX_N_MAX 16 #define I8XX_M_MIN 96 #define I8XX_M_MAX 140 #define I8XX_M1_MIN 18 #define I8XX_M1_MAX 26 #define I8XX_M2_MIN 6 #define I8XX_M2_MAX 16 #define I8XX_P_MIN 4 #define I8XX_P_MAX 128 #define I8XX_P1_MIN 2 #define I8XX_P1_MAX 33 #define I8XX_P1_LVDS_MIN 1 #define I8XX_P1_LVDS_MAX 6 #define I8XX_P2_SLOW 4 #define I8XX_P2_FAST 2 #define I8XX_P2_LVDS_SLOW 14 #define I8XX_P2_LVDS_FAST 7 #define I8XX_P2_SLOW_LIMIT 165000 #define I9XX_DOT_MIN 20000 #define I9XX_DOT_MAX 400000 #define I9XX_VCO_MIN 1400000 #define I9XX_VCO_MAX 2800000 /* Haven't found any reason to go this fast, but newer chips support it */ #define I96X_VCO_MAX 3200000 /* * These values are taken from the broadwater/crestline PLL spreadsheet. * All of the defines here are for the programmed register value, not * the 'counter' value (e.g. Ncounter = Nregister + 2) */ #define I9XX_N_MIN 1 #define I9XX_N_MAX 6 #define I9XX_M_MIN 70 #define I9XX_M_MAX 120 /* these two come from the calm1 macro */ #define I9XX_M1_MIN 10 #define I9XX_M1_MAX 22 #define I9XX_M2_MIN 5 #define I9XX_M2_MAX 9 #define I9XX_P_SDVO_DAC_MIN 5 #define I9XX_P_SDVO_DAC_MAX 80 #define I9XX_P_LVDS_MIN 7 #define I9XX_P_LVDS_MAX 98 #define I9XX_P1_MIN 1 #define I9XX_P1_MAX 8 #define I9XX_P2_SDVO_DAC_SLOW 10 #define I9XX_P2_SDVO_DAC_FAST 5 #define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000 #define I9XX_P2_LVDS_SLOW 14 #define I9XX_P2_LVDS_FAST 7 #define I9XX_P2_LVDS_SLOW_LIMIT 112000 #define INTEL_LIMIT_I8XX_DVO_DAC 0 #define INTEL_LIMIT_I8XX_LVDS 1 #define INTEL_LIMIT_I9XX_SDVO_DAC 2 #define INTEL_LIMIT_I9XX_LVDS 3 static const intel_limit_t intel_limits[] = { { /* INTEL_LIMIT_I8XX_DVO_DAC */ .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX }, .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, }, { /* INTEL_LIMIT_I8XX_LVDS */ .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, .p1 = { .min = I8XX_P1_LVDS_MIN, .max = I8XX_P1_LVDS_MAX }, .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, }, { /* INTEL_LIMIT_I9XX_SDVO_DAC */ .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX }, .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, }, { /* INTEL_LIMIT_I9XX_LVDS */ .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX }, .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, /* The single-channel range is 25-112Mhz, and dual-channel * is 80-224Mhz. Prefer single channel as much as possible. */ .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, }, }; static const intel_limit_t *intel_limit (xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); const intel_limit_t *limit; if (IS_I9XX(pI830)) { if (i830PipeHasType (crtc, I830_OUTPUT_LVDS)) limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS]; else limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; } else { if (i830PipeHasType (crtc, I830_OUTPUT_LVDS)) limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS]; else limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC]; } return limit; } /** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ static void i8xx_clock(int refclk, intel_clock_t *clock) { clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / (clock->n + 2); clock->dot = clock->vco / clock->p; } /** Derive the pixel clock for the given refclk and divisors for 9xx chips. */ static void i9xx_clock(int refclk, intel_clock_t *clock) { clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / (clock->n + 2); clock->dot = clock->vco / clock->p; } static void intel_clock(I830Ptr pI830, int refclk, intel_clock_t *clock) { if (IS_I9XX(pI830)) i9xx_clock (refclk, clock); else i8xx_clock (refclk, clock); } static void i830PrintPll(char *prefix, intel_clock_t *clock) { ErrorF("%s: dotclock %d vco %d ((m %d, m1 %d, m2 %d), n %d, (p %d, p1 %d, p2 %d))\n", prefix, clock->dot, clock->vco, clock->m, clock->m1, clock->m2, clock->n, clock->p, clock->p1, clock->p2); } /** * Returns whether any output on the specified pipe is of the specified type */ Bool i830PipeHasType (xf86CrtcPtr crtc, int type) { ScrnInfoPtr pScrn = crtc->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); int i; for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; if (output->crtc == crtc) { I830OutputPrivatePtr intel_output = output->driver_private; if (intel_output->type == type) return TRUE; } } return FALSE; } #define i830PllInvalid(s) { /* ErrorF (s) */; return FALSE; } /** * Returns whether the given set of divisors are valid for a given refclk with * the given outputs. */ static Bool i830PllIsValid(xf86CrtcPtr crtc, intel_clock_t *clock) { const intel_limit_t *limit = intel_limit (crtc); if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) i830PllInvalid ("p1 out of range\n"); if (clock->p < limit->p.min || limit->p.max < clock->p) i830PllInvalid ("p out of range\n"); if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) i830PllInvalid ("m2 out of range\n"); if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) i830PllInvalid ("m1 out of range\n"); if (clock->m1 <= clock->m2) i830PllInvalid ("m1 <= m2\n"); if (clock->m < limit->m.min || limit->m.max < clock->m) i830PllInvalid ("m out of range\n"); if (clock->n < limit->n.min || limit->n.max < clock->n) i830PllInvalid ("n out of range\n"); if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) i830PllInvalid ("vco out of range\n"); /* XXX: We may need to be checking "Dot clock" depending on the multiplier, * output, etc., rather than just a single range. */ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) i830PllInvalid ("dot out of range\n"); return TRUE; } /** * Returns a set of divisors for the desired target clock with the given * refclk, or FALSE. The returned values represent the clock equation: * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. */ static Bool i830FindBestPLL(xf86CrtcPtr crtc, int target, int refclk, intel_clock_t *best_clock) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); intel_clock_t clock; const intel_limit_t *limit = intel_limit (crtc); int err = target; if (i830PipeHasType(crtc, I830_OUTPUT_LVDS)) { /* For LVDS, if the panel is on, just rely on its current settings for * dual-channel. We haven't figured out how to reliably set up * different single/dual channel state, if we even can. */ if ((INREG(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = limit->p2.p2_fast; else clock.p2 = limit->p2.p2_slow; } else { if (target < limit->p2.dot_limit) clock.p2 = limit->p2.p2_slow; else clock.p2 = limit->p2.p2_fast; } memset (best_clock, 0, sizeof (*best_clock)); for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { for (clock.m2 = limit->m2.min; clock.m2 < clock.m1 && clock.m2 <= limit->m2.max; clock.m2++) { for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; clock.p1++) { int this_err; intel_clock (pI830, refclk, &clock); if (!i830PllIsValid(crtc, &clock)) continue; this_err = abs(clock.dot - target); if (this_err < err) { *best_clock = clock; err = this_err; } } } } } return (err != target); } void i830WaitForVblank(ScrnInfoPtr pScreen) { /* Wait for 20ms, i.e. one cycle at 50hz. */ usleep(30000); } void i830PipeSetBase(xf86CrtcPtr crtc, int x, int y) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; unsigned long Start, Offset; int dspbase = (plane == 0 ? DSPABASE : DSPBBASE); int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF); int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF); Offset = ((y * pScrn->displayWidth + x) * pI830->cpp); if (pI830->front_buffer == NULL) { /* During startup we may be called as part of monitor detection while * there is no memory allocation done, so just supply a dummy base * address. */ Start = 0; } else if (crtc->rotatedData != NULL) { /* offset is done by shadow painting code, not here */ Start = (char *)crtc->rotatedData - (char *)pI830->FbBase; Offset = 0; } else if (I830IsPrimary(pScrn)) { Start = pI830->front_buffer->offset; } else { I830Ptr pI8301 = I830PTR(pI830->entityPrivate->pScrn_1); Start = pI8301->front_buffer_2->offset; } if (IS_I965G(pI830)) { OUTREG(dspbase, Offset); POSTING_READ(dspbase); OUTREG(dspsurf, Start); POSTING_READ(dspsurf); OUTREG(dsptileoff, (y << 16) | x); } else { OUTREG(dspbase, Start + Offset); POSTING_READ(dspbase); } #ifdef XF86DRI if (pI830->directRenderingEnabled) { drmI830Sarea *sPriv = (drmI830Sarea *) DRIGetSAREAPrivate(pScrn->pScreen); if (!sPriv) return; switch (plane) { case 0: sPriv->planeA_x = x; sPriv->planeA_y = y; break; case 1: sPriv->planeB_x = x; sPriv->planeB_y = y; break; default: xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Can't update pipe %d in SAREA\n", pipe); break; } } #endif } /* * Both crtc activation and video overlay enablement on pipe B * will fail on i830 if pipe A is not running. This function * makes sure pipe A is active for these cases */ int i830_crtc_pipe (xf86CrtcPtr crtc) { if (crtc == NULL) return 0; return ((I830CrtcPrivatePtr) crtc->driver_private)->pipe; } static xf86CrtcPtr i830_crtc_for_pipe (ScrnInfoPtr scrn, int pipe) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); int c; for (c = 0; c < xf86_config->num_crtc; c++) { xf86CrtcPtr crtc = xf86_config->crtc[c]; if (i830_crtc_pipe (crtc) == pipe) return crtc; } return NULL; } Bool i830_pipe_a_require_activate (ScrnInfoPtr scrn) { xf86CrtcPtr crtc = i830_crtc_for_pipe (scrn, 0); /* VESA 640x480x72Hz mode to set on the pipe */ static DisplayModeRec mode = { NULL, NULL, "640x480", MODE_OK, M_T_DEFAULT, 31500, 640, 664, 704, 832, 0, 480, 489, 491, 520, 0, V_NHSYNC | V_NVSYNC, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, FALSE, FALSE, 0, NULL, 0, 0.0, 0.0 }; if (!crtc) return FALSE; if (crtc->enabled) return FALSE; xf86SetModeCrtc (&mode, INTERLACE_HALVE_V); crtc->funcs->mode_set (crtc, &mode, &mode, 0, 0); crtc->funcs->dpms (crtc, DPMSModeOn); return TRUE; } void i830_pipe_a_require_deactivate (ScrnInfoPtr scrn) { xf86CrtcPtr crtc = i830_crtc_for_pipe (scrn, 0); if (!crtc) return; if (crtc->enabled) return; crtc->funcs->dpms (crtc, DPMSModeOff); return; } /* FIXME: use pixmap private instead if possible */ static Bool i830_display_tiled(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); /* Rotated data is currently linear, allocated either via XAA or EXA */ if (crtc->rotatedData) return FALSE; if (pI830->front_buffer && pI830->front_buffer->tiling != TILE_NONE) return TRUE; return FALSE; } /* * Several restrictions: * - DSP[AB]CNTR - no line duplication && no pixel multiplier * - pixel format == 15 bit, 16 bit, or 32 bit xRGB_8888 * - no alpha buffer discard * - no dual wide display * - progressive mode only (DSP[AB]CNTR) * - uncompressed fb is <= 2048 in width, 0 mod 8 * - uncompressed fb is <= 1536 in height, 0 mod 2 * - SR display watermarks must be equal between 16bpp and 32bpp? * * FIXME: verify above conditions are true * * Enable 8xx style FB compression */ static void i830_enable_fb_compression_8xx(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; uint32_t fbc_ctl = 0; unsigned long compressed_stride; int plane = (intel_crtc->plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB); unsigned long uncompressed_stride = pScrn->displayWidth * pI830->cpp; unsigned long interval = 1000; if (INREG(FBC_CONTROL) & FBC_CTL_EN) return; compressed_stride = pI830->compressed_front_buffer->size / FBC_LL_SIZE; if (uncompressed_stride < compressed_stride) compressed_stride = uncompressed_stride; /* FBC_CTL wants 64B units */ compressed_stride = (compressed_stride / 64) - 1; /* Set it up... */ /* Wait for compressing bit to clear */ while (INREG(FBC_STATUS) & FBC_STAT_COMPRESSING) ; /* nothing */ i830WaitForVblank(pScrn); OUTREG(FBC_CFB_BASE, pI830->compressed_front_buffer->bus_addr); OUTREG(FBC_LL_BASE, pI830->compressed_ll_buffer->bus_addr + 6); OUTREG(FBC_CONTROL2, FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | FBC_CTL_CPU_FENCE | plane); OUTREG(FBC_FENCE_OFF, crtc->y); /* Zero buffers */ memset(pI830->FbBase + pI830->compressed_front_buffer->offset, 0, pI830->compressed_front_buffer->size); memset(pI830->FbBase + pI830->compressed_ll_buffer->offset, 0, pI830->compressed_ll_buffer->size); /* enable it... */ fbc_ctl |= FBC_CTL_EN | FBC_CTL_PERIODIC; fbc_ctl |= (compressed_stride & 0xff) << FBC_CTL_STRIDE_SHIFT; fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT; fbc_ctl |= FBC_CTL_UNCOMPRESSIBLE; fbc_ctl |= pI830->front_buffer->fence_nr; OUTREG(FBC_CONTROL, fbc_ctl); } /* * Disable 8xx style FB compression */ static void i830_disable_fb_compression_8xx(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); uint32_t fbc_ctl; /* Disable compression */ fbc_ctl = INREG(FBC_CONTROL); fbc_ctl &= ~FBC_CTL_EN; OUTREG(FBC_CONTROL, fbc_ctl); /* Wait for compressing bit to clear */ while (INREG(FBC_STATUS) & FBC_STAT_COMPRESSING) ; /* nothing */ } static void i830_disable_fb_compression2(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); uint32_t dpfc_ctl; /* Disable compression */ dpfc_ctl = INREG(DPFC_CONTROL); dpfc_ctl &= ~DPFC_CTL_EN; OUTREG(DPFC_CONTROL, dpfc_ctl); i830WaitForVblank(pScrn); } static void i830_enable_fb_compression2(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int plane = (intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB); unsigned long stall_watermark = 200, frames = 50; if (INREG(DPFC_CONTROL) & DPFC_CTL_EN) return; /* Set it up... */ i830_disable_fb_compression2(crtc); OUTREG(DPFC_CB_BASE, pI830->compressed_front_buffer->offset); /* Update i830_memory.c too if compression ratio changes */ OUTREG(DPFC_CONTROL, plane | DPFC_CTL_FENCE_EN | DPFC_CTL_LIMIT_4X | pI830->front_buffer->fence_nr); OUTREG(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN | (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) | (frames << DPFC_RECOMP_TIMER_COUNT_SHIFT)); OUTREG(DPFC_FENCE_YOFF, crtc->y); /* Zero buffers */ memset(pI830->FbBase + pI830->compressed_front_buffer->offset, 0, pI830->compressed_front_buffer->size); /* enable it... */ OUTREG(DPFC_CONTROL, INREG(DPFC_CONTROL) | DPFC_CTL_EN); } static void i830_enable_fb_compression(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); if (IS_IGD_GM(pI830)) return i830_enable_fb_compression2(crtc); i830_enable_fb_compression_8xx(crtc); } static void i830_disable_fb_compression(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); if (IS_IGD_GM(pI830)) return i830_disable_fb_compression2(crtc); i830_disable_fb_compression_8xx(crtc); } static Bool i830_use_fb_compression(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int plane = (intel_crtc->plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB); int i, count = 0; /* Only available on one pipe at a time */ for (i = 0; i < xf86_config->num_crtc; i++) { if (xf86_config->crtc[i]->enabled) count++; } /* Here we disable it to catch one->two pipe enabled configs */ if (count > 1) { if (i830_fb_compression_supported(pI830)) i830_disable_fb_compression(crtc); return FALSE; } if (!pI830->fb_compression) return FALSE; if (!i830_display_tiled(crtc)) return FALSE; /* Pre-965 only supports plane A */ if (!IS_I965GM(pI830) && plane != FBC_CTL_PLANEA) return FALSE; /* Need 15, 16, or 32 (w/alpha) pixel format */ if (!(pScrn->bitsPerPixel == 16 || /* covers 15 bit mode as well */ pScrn->bitsPerPixel == 32)) /* mode_set dtrt if fbc is in use */ return FALSE; /* * No checks for pixel multiply, incl. horizontal, or interlaced modes * since they're currently unused. */ return TRUE; } /** * Sets the power management mode of the pipe and plane. * * This code should probably grow support for turning the cursor off and back * on appropriately at the same time as we're turning the pipe off/on. */ static void i830_crtc_dpms(xf86CrtcPtr crtc, int mode) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; int dspbase_reg = (plane == 0) ? DSPABASE : DSPBBASE; uint32_t temp; /* XXX: When our outputs are all unaware of DPMS modes other than off and * on, we should map those modes to DPMSModeOff in the CRTC. */ switch (mode) { case DPMSModeOn: case DPMSModeStandby: case DPMSModeSuspend: /* Enable the DPLL */ temp = INREG(dpll_reg); if ((temp & DPLL_VCO_ENABLE) == 0) { OUTREG(dpll_reg, temp); POSTING_READ(dpll_reg); /* Wait for the clocks to stabilize. */ usleep(150); OUTREG(dpll_reg, temp | DPLL_VCO_ENABLE); POSTING_READ(dpll_reg); /* Wait for the clocks to stabilize. */ usleep(150); OUTREG(dpll_reg, temp | DPLL_VCO_ENABLE); POSTING_READ(dpll_reg); /* Wait for the clocks to stabilize. */ usleep(150); } /* Enable the pipe */ temp = INREG(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) == 0) OUTREG(pipeconf_reg, temp | PIPEACONF_ENABLE); /* Enable the plane */ temp = INREG(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) == 0) { OUTREG(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ OUTREG(dspbase_reg, INREG(dspbase_reg)); } i830_crtc_load_lut(crtc); /* Give the overlay scaler a chance to enable if it's on this pipe */ i830_crtc_dpms_video(crtc, TRUE); /* Reenable compression if needed */ if (i830_use_fb_compression(crtc)) i830_enable_fb_compression(crtc); break; case DPMSModeOff: /* Shut off compression if in use */ if (i830_use_fb_compression(crtc)) i830_disable_fb_compression(crtc); /* Give the overlay scaler a chance to disable if it's on this pipe */ i830_crtc_dpms_video(crtc, FALSE); /* May need to leave pipe A on */ if ((pipe == 0) && (pI830->quirk_flag & QUIRK_PIPEA_FORCE)) return; /* Disable the VGA plane that we never use */ OUTREG(VGACNTRL, VGA_DISP_DISABLE); /* Disable display plane */ temp = INREG(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) != 0) { OUTREG(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ OUTREG(dspbase_reg, INREG(dspbase_reg)); POSTING_READ(dspbase_reg); } if (!IS_I9XX(pI830)) { /* Wait for vblank for the disable to take effect */ i830WaitForVblank(pScrn); } /* Next, disable display pipes */ temp = INREG(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) != 0) { OUTREG(pipeconf_reg, temp & ~PIPEACONF_ENABLE); POSTING_READ(pipeconf_reg); } /* Wait for vblank for the disable to take effect. */ i830WaitForVblank(pScrn); temp = INREG(dpll_reg); if ((temp & DPLL_VCO_ENABLE) != 0) { OUTREG(dpll_reg, temp & ~DPLL_VCO_ENABLE); POSTING_READ(dpll_reg); } /* Wait for the clocks to turn off. */ usleep(150); break; } intel_crtc->dpms_mode = mode; #ifdef XF86DRI if (pI830->directRenderingEnabled) { drmI830Sarea *sPriv = (drmI830Sarea *) DRIGetSAREAPrivate(pScrn->pScreen); Bool enabled = crtc->enabled && mode != DPMSModeOff; I830DRISetVBlankInterrupt (pScrn, TRUE); if (!sPriv) return; switch (plane) { case 0: sPriv->planeA_w = enabled ? crtc->mode.HDisplay : 0; sPriv->planeA_h = enabled ? crtc->mode.VDisplay : 0; break; case 1: sPriv->planeB_w = enabled ? crtc->mode.HDisplay : 0; sPriv->planeB_h = enabled ? crtc->mode.VDisplay : 0; break; default: xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Can't update pipe %d in SAREA\n", pipe); break; } } #endif } static Bool i830_crtc_lock (xf86CrtcPtr crtc) { /* Sync the engine before mode switch */ i830WaitSync(crtc->scrn); #ifdef XF86DRI return I830DRILock(crtc->scrn); #else return FALSE; #endif } static void i830_crtc_unlock (xf86CrtcPtr crtc) { #ifdef XF86DRI I830DRIUnlock (crtc->scrn); #endif } static void i830_crtc_prepare (xf86CrtcPtr crtc) { I830CrtcPrivatePtr intel_crtc = crtc->driver_private; /* Temporarily turn off FB compression during modeset */ if (i830_use_fb_compression(crtc)) i830_disable_fb_compression(crtc); if (intel_crtc->enabled) crtc->funcs->hide_cursor (crtc); crtc->funcs->dpms (crtc, DPMSModeOff); } static void i830_crtc_commit (xf86CrtcPtr crtc) { I830CrtcPrivatePtr intel_crtc = crtc->driver_private; Bool deactivate = FALSE; if (!intel_crtc->enabled && intel_crtc->pipe != 0) deactivate = i830_pipe_a_require_activate (crtc->scrn); intel_crtc->enabled = TRUE; crtc->funcs->dpms (crtc, DPMSModeOn); if (crtc->scrn->pScreen != NULL) xf86_reload_cursors (crtc->scrn->pScreen); if (deactivate) i830_pipe_a_require_deactivate (crtc->scrn); /* Reenable FB compression if possible */ if (i830_use_fb_compression(crtc)) i830_enable_fb_compression(crtc); } void i830_output_prepare (xf86OutputPtr output) { output->funcs->dpms (output, DPMSModeOff); } void i830_output_commit (xf86OutputPtr output) { output->funcs->dpms (output, DPMSModeOn); } static Bool i830_crtc_mode_fixup(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayModePtr adjusted_mode) { return TRUE; } /** Returns the core display clock speed for i830 - i945 */ static int i830_get_core_clock_speed(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); /* Core clock values taken from the published datasheets. * The 830 may go up to 166 Mhz, which we should check. */ if (IS_I945G(pI830) || IS_G33CLASS(pI830)) return 400000; else if (IS_I915G(pI830)) return 333000; else if (IS_I945GM(pI830) || IS_845G(pI830)) return 200000; else if (IS_I915GM(pI830)) { uint16_t gcfgc; #if XSERVER_LIBPCIACCESS pci_device_cfg_read_u16 (pI830->PciInfo, &gcfgc, I915_GCFGC); #else gcfgc = pciReadWord(pI830->PciTag, I915_GCFGC); #endif if (gcfgc & I915_LOW_FREQUENCY_ENABLE) return 133000; else { switch (gcfgc & I915_DISPLAY_CLOCK_MASK) { case I915_DISPLAY_CLOCK_333_MHZ: return 333000; default: case I915_DISPLAY_CLOCK_190_200_MHZ: return 190000; } } } else if (IS_I865G(pI830)) return 266000; else if (IS_I855(pI830)) { #if XSERVER_LIBPCIACCESS struct pci_device *bridge = intel_host_bridge (); uint16_t hpllcc; pci_device_cfg_read_u16 (bridge, &hpllcc, I855_HPLLCC); #else PCITAG bridge = pciTag(0, 0, 0); /* This is always the host bridge */ uint16_t hpllcc = pciReadWord(bridge, I855_HPLLCC); #endif /* Assume that the hardware is in the high speed state. This * should be the default. */ switch (hpllcc & I855_CLOCK_CONTROL_MASK) { case I855_CLOCK_133_200: case I855_CLOCK_100_200: return 200000; case I855_CLOCK_166_250: return 250000; case I855_CLOCK_100_133: return 133000; } } else /* 852, 830 */ return 133000; return 0; /* Silence gcc warning */ } /** * Return the pipe currently connected to the panel fitter, * or -1 if the panel fitter is not present or not in use */ static int i830_panel_fitter_pipe(I830Ptr pI830) { uint32_t pfit_control; /* i830 doesn't have a panel fitter */ if (IS_I830(pI830)) return -1; pfit_control = INREG(PFIT_CONTROL); /* See if the panel fitter is in use */ if ((pfit_control & PFIT_ENABLE) == 0) return -1; /* 965 can place panel fitter on either pipe */ if (IS_I965G(pI830)) return (pfit_control & PFIT_PIPE_MASK) >> PFIT_PIPE_SHIFT; /* older chips can only use pipe 1 */ return 1; } /** * Sets up registers for the given mode/adjusted_mode pair. * * The clocks, CRTCs and outputs attached to this CRTC must be off. * * This shouldn't enable any clocks, CRTCs, or outputs, but they should * be easily turned on/off after this. */ static void i830_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayModePtr adjusted_mode, int x, int y) { ScrnInfoPtr pScrn = crtc->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; I830OutputPrivatePtr intel_output; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int fp_reg = (pipe == 0) ? FPA0 : FPB0; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int dpll_md_reg = (pipe == 0) ? DPLL_A_MD : DPLL_B_MD; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR; int dspstride_reg = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE; int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS; int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE; int i; int refclk; intel_clock_t clock; uint32_t dpll = 0, fp = 0, dspcntr, pipeconf; Bool ok, is_sdvo = FALSE, is_dvo = FALSE; Bool is_crt = FALSE, is_lvds = FALSE, is_tv = FALSE; /* Set up some convenient bools for what outputs are connected to * our pipe, used in DPLL setup. */ for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; intel_output = output->driver_private; if (output->crtc != crtc) continue; switch (intel_output->type) { case I830_OUTPUT_LVDS: is_lvds = TRUE; break; case I830_OUTPUT_SDVO: is_sdvo = TRUE; if (intel_output->needs_tv_clock) is_tv = TRUE; break; case I830_OUTPUT_DVO_TMDS: case I830_OUTPUT_DVO_LVDS: case I830_OUTPUT_DVO_TVOUT: is_dvo = TRUE; break; case I830_OUTPUT_TVOUT: is_tv = TRUE; break; case I830_OUTPUT_ANALOG: is_crt = TRUE; break; } } if (IS_I9XX(pI830)) { refclk = 96000; } else { refclk = 48000; } ok = i830FindBestPLL(crtc, adjusted_mode->Clock, refclk, &clock); if (!ok) FatalError("Couldn't find PLL settings for mode!\n"); if (fabs(adjusted_mode->Clock - clock.dot) / clock.dot > .02) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Chosen PLL clock of %.1f Mhz more than 2%% away from " "desired %.1f Mhz\n", (float)clock.dot / 1000, (float)adjusted_mode->Clock / 1000); } fp = clock.n << 16 | clock.m1 << 8 | clock.m2; dpll = DPLL_VGA_MODE_DIS; if (IS_I9XX(pI830)) { if (is_lvds) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; if (is_sdvo) { dpll |= DPLL_DVO_HIGH_SPEED; if ((IS_I945G(pI830) || IS_I945GM(pI830) || IS_G33CLASS(pI830)) && !is_tv) { int sdvo_pixel_multiply = adjusted_mode->Clock / mode->Clock; dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; } } /* compute bitmask from p1 value */ dpll |= (1 << (clock.p1 - 1)) << 16; switch (clock.p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; break; case 7: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; break; case 10: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; break; case 14: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } if (IS_I965G(pI830)) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); } else { if (is_lvds) { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; } else { if (clock.p1 == 2) dpll |= PLL_P1_DIVIDE_BY_TWO; else dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; if (clock.p2 == 4) dpll |= PLL_P2_DIVIDE_BY_4; } } if (is_sdvo && is_tv) dpll |= PLL_REF_INPUT_TVCLKINBC; else if (is_tv) { /* XXX: just matching BIOS for now */ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; } #if 0 else if (is_lvds) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; #endif else dpll |= PLL_REF_INPUT_DREFCLK; /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; switch (pScrn->bitsPerPixel) { case 8: dspcntr |= DISPPLANE_8BPP; break; case 16: if (pScrn->depth == 15) dspcntr |= DISPPLANE_15_16BPP; else dspcntr |= DISPPLANE_16BPP; break; case 32: dspcntr |= DISPPLANE_32BPP_NO_ALPHA; break; default: FatalError("unknown display bpp\n"); } if (pipe == 0) dspcntr |= DISPPLANE_SEL_PIPE_A; else dspcntr |= DISPPLANE_SEL_PIPE_B; if (IS_I965G(pI830) && i830_display_tiled(crtc)) dspcntr |= DISPLAY_PLANE_TILED; pipeconf = INREG(pipeconf_reg); if (pipe == 0 && !IS_I965G(pI830)) { /* Enable pixel doubling when the dot clock is > 90% of the (display) * core speed. * * XXX: No double-wide on 915GM pipe B. Is that the only reason for the * pipe == 0 check? */ if (mode->Clock > i830_get_core_clock_speed(pScrn) * 9 / 10) pipeconf |= PIPEACONF_DOUBLE_WIDE; else pipeconf &= ~PIPEACONF_DOUBLE_WIDE; } /* * This "shouldn't" be needed as the dpms on code * will be run after the mode is set. On 9xx, it helps. * On 855, it can lock up the chip (and the entire machine) */ if (!IS_I85X (pI830)) { dspcntr |= DISPLAY_PLANE_ENABLE; pipeconf |= PIPEACONF_ENABLE; dpll |= DPLL_VCO_ENABLE; } /* Disable the panel fitter if it was on our pipe */ if (i830_panel_fitter_pipe (pI830) == pipe) OUTREG(PFIT_CONTROL, 0); if (pI830->debug_modes) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); xf86PrintModeline(pScrn->scrnIndex, mode); if (!xf86ModesEqual(mode, adjusted_mode)) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Adjusted mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); xf86PrintModeline(pScrn->scrnIndex, adjusted_mode); } i830PrintPll("chosen", &clock); } if (dpll & DPLL_VCO_ENABLE) { OUTREG(fp_reg, fp); OUTREG(dpll_reg, dpll & ~DPLL_VCO_ENABLE); POSTING_READ(dpll_reg); usleep(150); } /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. */ if (is_lvds) { uint32_t lvds = INREG(LVDS); lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ if (clock.p2 == I9XX_P2_LVDS_FAST) lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; else lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); if (pI830->lvds_24_bit_mode) { /* Option set which requests 24-bit mode * (LVDS_A3_POWER_UP, as opposed to 18-bit mode) here; we * still need to look more thoroughly into how panels * behave in the two modes. This option enables that * experimentation. */ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Selecting less common 24 bit TMDS pixel format.\n"); lvds |= LVDS_A3_POWER_UP; lvds |= LVDS_DATA_FORMAT_DOT_ONE; } else { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Selecting standard 18 bit TMDS pixel format.\n"); } /* Enable dithering if we're in 18-bit mode. */ if (IS_I965G(pI830)) { if ((lvds & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) lvds &= ~LVDS_DITHER_ENABLE; else lvds |= LVDS_DITHER_ENABLE; } lvds |= intel_output->lvds_bits; OUTREG(LVDS, lvds); POSTING_READ(LVDS); } OUTREG(fp_reg, fp); OUTREG(dpll_reg, dpll); POSTING_READ(dpll_reg); /* Wait for the clocks to stabilize. */ usleep(150); if (IS_I965G(pI830)) { int sdvo_pixel_multiply = adjusted_mode->Clock / mode->Clock; OUTREG(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); } else { /* write it again -- the BIOS does, after all */ OUTREG(dpll_reg, dpll); } POSTING_READ(dpll_reg); /* Wait for the clocks to stabilize. */ usleep(150); OUTREG(htot_reg, (adjusted_mode->CrtcHDisplay - 1) | ((adjusted_mode->CrtcHTotal - 1) << 16)); OUTREG(hblank_reg, (adjusted_mode->CrtcHBlankStart - 1) | ((adjusted_mode->CrtcHBlankEnd - 1) << 16)); OUTREG(hsync_reg, (adjusted_mode->CrtcHSyncStart - 1) | ((adjusted_mode->CrtcHSyncEnd - 1) << 16)); OUTREG(vtot_reg, (adjusted_mode->CrtcVDisplay - 1) | ((adjusted_mode->CrtcVTotal - 1) << 16)); OUTREG(vblank_reg, (adjusted_mode->CrtcVBlankStart - 1) | ((adjusted_mode->CrtcVBlankEnd - 1) << 16)); OUTREG(vsync_reg, (adjusted_mode->CrtcVSyncStart - 1) | ((adjusted_mode->CrtcVSyncEnd - 1) << 16)); OUTREG(dspstride_reg, pScrn->displayWidth * pI830->cpp); /* pipesrc and dspsize control the size that is scaled from, which should * always be the user's requested size. */ OUTREG(dspsize_reg, ((mode->VDisplay - 1) << 16) | (mode->HDisplay - 1)); OUTREG(dsppos_reg, 0); OUTREG(pipesrc_reg, ((mode->HDisplay - 1) << 16) | (mode->VDisplay - 1)); OUTREG(pipeconf_reg, pipeconf); POSTING_READ(pipeconf_reg); i830WaitForVblank(pScrn); OUTREG(dspcntr_reg, dspcntr); /* Flush the plane changes */ i830PipeSetBase(crtc, x, y); #ifdef XF86DRI I830DRISetVBlankInterrupt (pScrn, TRUE); #endif i830WaitForVblank(pScrn); } /** Loads the palette/gamma unit for the CRTC with the prepared values */ void i830_crtc_load_lut(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B; int i; /* The clocks have to be on to load the palette. */ if (!crtc->enabled) return; for (i = 0; i < 256; i++) { OUTREG(palreg + 4 * i, (intel_crtc->lut_r[i] << 16) | (intel_crtc->lut_g[i] << 8) | intel_crtc->lut_b[i]); } } /** Sets the color ramps on behalf of RandR */ static void i830_crtc_gamma_set(xf86CrtcPtr crtc, CARD16 *red, CARD16 *green, CARD16 *blue, int size) { I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int i; assert(size == 256); for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = red[i] >> 8; intel_crtc->lut_g[i] = green[i] >> 8; intel_crtc->lut_b[i] = blue[i] >> 8; } i830_crtc_load_lut(crtc); } /** * Allocates memory for a locked-in-framebuffer shadow of the given * width and height for this CRTC's rotated shadow framebuffer. */ static void * i830_crtc_shadow_allocate (xf86CrtcPtr crtc, int width, int height) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; unsigned long rotate_pitch; int align = KB(4), size; rotate_pitch = pScrn->displayWidth * pI830->cpp; size = rotate_pitch * height; assert(intel_crtc->rotate_mem == NULL); intel_crtc->rotate_mem = i830_allocate_memory(pScrn, "rotated crtc", size, align, 0); if (intel_crtc->rotate_mem == NULL) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Couldn't allocate shadow memory for rotated CRTC\n"); return NULL; } memset(pI830->FbBase + intel_crtc->rotate_mem->offset, 0, size); return pI830->FbBase + intel_crtc->rotate_mem->offset; } /** * Creates a pixmap for this CRTC's rotated shadow framebuffer. */ static PixmapPtr i830_crtc_shadow_create(xf86CrtcPtr crtc, void *data, int width, int height) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); unsigned long rotate_pitch; PixmapPtr rotate_pixmap; if (!data) data = i830_crtc_shadow_allocate (crtc, width, height); rotate_pitch = pScrn->displayWidth * pI830->cpp; rotate_pixmap = GetScratchPixmapHeader(pScrn->pScreen, width, height, pScrn->depth, pScrn->bitsPerPixel, rotate_pitch, data); if (rotate_pixmap == NULL) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Couldn't allocate shadow pixmap for rotated CRTC\n"); } return rotate_pixmap; } static void i830_crtc_shadow_destroy(xf86CrtcPtr crtc, PixmapPtr rotate_pixmap, void *data) { ScrnInfoPtr pScrn = crtc->scrn; I830CrtcPrivatePtr intel_crtc = crtc->driver_private; if (rotate_pixmap) FreeScratchPixmapHeader(rotate_pixmap); if (data) { /* Be sure to sync acceleration before the memory gets unbound. */ I830Sync(pScrn); i830_free_memory(pScrn, intel_crtc->rotate_mem); intel_crtc->rotate_mem = NULL; } } void i830DescribeOutputConfiguration(ScrnInfoPtr pScrn) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); int i; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Output configuration:\n"); for (i = 0; i < xf86_config->num_crtc; i++) { xf86CrtcPtr crtc = xf86_config->crtc[i]; I830CrtcPrivatePtr intel_crtc = crtc ? crtc->driver_private : NULL; uint32_t dspcntr = intel_crtc->plane == 0 ? INREG(DSPACNTR) : INREG(DSPBCNTR); uint32_t pipeconf = i == 0 ? INREG(PIPEACONF) : INREG(PIPEBCONF); Bool hw_plane_enable = (dspcntr & DISPLAY_PLANE_ENABLE) != 0; Bool hw_pipe_enable = (pipeconf & PIPEACONF_ENABLE) != 0; xf86DrvMsg(pScrn->scrnIndex, X_INFO, " Pipe %c is %s\n", 'A' + i, crtc->enabled ? "on" : "off"); xf86DrvMsg(pScrn->scrnIndex, X_INFO, " Display plane %c is now %s and connected to pipe %c.\n", 'A' + intel_crtc->plane, hw_plane_enable ? "enabled" : "disabled", dspcntr & DISPPLANE_SEL_PIPE_MASK ? 'B' : 'A'); if (hw_pipe_enable != crtc->enabled) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, " Hardware claims pipe %c is %s while software " "believes it is %s\n", 'A' + i, hw_pipe_enable ? "on" : "off", crtc->enabled ? "on" : "off"); } if (hw_plane_enable != crtc->enabled) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, " Hardware claims plane %c is %s while software " "believes it is %s\n", 'A' + i, hw_plane_enable ? "on" : "off", crtc->enabled ? "on" : "off"); } } for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; xf86CrtcPtr crtc = output->crtc; I830CrtcPrivatePtr intel_crtc = crtc ? crtc->driver_private : NULL; xf86DrvMsg(pScrn->scrnIndex, X_INFO, " Output %s is connected to pipe %s\n", output->name, intel_crtc == NULL ? "none" : (intel_crtc->pipe == 0 ? "A" : "B")); } } /** * Get a pipe with a simple mode set on it for doing load-based monitor * detection. * * It will be up to the load-detect code to adjust the pipe as appropriate for * its requirements. The pipe will be connected to no other outputs. * * Currently this code will only succeed if there is a pipe with no outputs * configured for it. In the future, it could choose to temporarily disable * some outputs to free up a pipe for its use. * * \return crtc, or NULL if no pipes are available. */ /* VESA 640x480x72Hz mode to set on the pipe */ static DisplayModeRec load_detect_mode = { NULL, NULL, "640x480", MODE_OK, M_T_DEFAULT, 31500, 640, 664, 704, 832, 0, 480, 489, 491, 520, 0, V_NHSYNC | V_NVSYNC, 0, 0, 640, 640, 664, 704, 832, 832, 0, 480, 489, 489, 491, 520, 520, FALSE, FALSE, 0, NULL, 0, 0.0, 0.0 }; xf86CrtcPtr i830GetLoadDetectPipe(xf86OutputPtr output, DisplayModePtr mode, int *dpms_mode) { ScrnInfoPtr pScrn = output->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830OutputPrivatePtr intel_output = output->driver_private; I830CrtcPrivatePtr intel_crtc; xf86CrtcPtr supported_crtc =NULL; xf86CrtcPtr crtc = NULL; int i; if (output->crtc) { crtc = output->crtc; /* * Make sure the crtc and output are running */ intel_crtc = crtc->driver_private; *dpms_mode = intel_crtc->dpms_mode; if (intel_crtc->dpms_mode != DPMSModeOn) { crtc->funcs->dpms (crtc, DPMSModeOn); output->funcs->dpms (output, DPMSModeOn); } return crtc; } for (i = 0; i < xf86_config->num_crtc; i++) { xf86CrtcPtr possible_crtc; if (!(output->possible_crtcs & (1 << i))) continue; possible_crtc = xf86_config->crtc[i]; if (!possible_crtc->enabled) { crtc = possible_crtc; break; } if (!supported_crtc) supported_crtc = possible_crtc; } if (!crtc) { crtc = supported_crtc; if (!crtc) return NULL; } output->crtc = crtc; intel_output->load_detect_temp = TRUE; intel_crtc = crtc->driver_private; *dpms_mode = intel_crtc->dpms_mode; if (!crtc->enabled) { if (!mode) mode = &load_detect_mode; xf86CrtcSetMode (crtc, mode, RR_Rotate_0, 0, 0); } else { if (intel_crtc->dpms_mode != DPMSModeOn) crtc->funcs->dpms (crtc, DPMSModeOn); /* Add this output to the crtc */ output->funcs->mode_set (output, &crtc->mode, &crtc->mode); output->funcs->commit (output); } /* let the output get through one full cycle before testing */ i830WaitForVblank (pScrn); return crtc; } void i830ReleaseLoadDetectPipe(xf86OutputPtr output, int dpms_mode) { ScrnInfoPtr pScrn = output->scrn; I830OutputPrivatePtr intel_output = output->driver_private; xf86CrtcPtr crtc = output->crtc; if (intel_output->load_detect_temp) { output->crtc = NULL; intel_output->load_detect_temp = FALSE; crtc->enabled = xf86CrtcInUse (crtc); xf86DisableUnusedFunctions(pScrn); } /* * Switch crtc and output back off if necessary */ if (crtc->enabled && dpms_mode != DPMSModeOn) { if (output->crtc == crtc) output->funcs->dpms (output, dpms_mode); crtc->funcs->dpms (crtc, dpms_mode); } } /* Returns the clock of the currently programmed mode of the given pipe. */ static int i830_crtc_clock_get(ScrnInfoPtr pScrn, xf86CrtcPtr crtc) { I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int pipe = intel_crtc->pipe; uint32_t dpll = INREG((pipe == 0) ? DPLL_A : DPLL_B); uint32_t fp; intel_clock_t clock; if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) fp = INREG((pipe == 0) ? FPA0 : FPB0); else fp = INREG((pipe == 0) ? FPA1 : FPB1); clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; if (IS_I9XX(pI830)) { clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >> DPLL_FPA01_P1_POST_DIV_SHIFT); switch (dpll & DPLL_MODE_MASK) { case DPLLB_MODE_DAC_SERIAL: clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ? 5 : 10; break; case DPLLB_MODE_LVDS: clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ? 7 : 14; break; default: xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Unknown DPLL mode %08x in programmed mode\n", (int)(dpll & DPLL_MODE_MASK)); return 0; } /* XXX: Handle the 100Mhz refclk */ i9xx_clock(96000, &clock); } else { Bool is_lvds = (pipe == 1) && (INREG(LVDS) & LVDS_PORT_EN); if (is_lvds) { clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> DPLL_FPA01_P1_POST_DIV_SHIFT); /* if LVDS is dual-channel, p2 = 7 */ if ((INREG(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = 7; else clock.p2 = 14; if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) i8xx_clock(66000, &clock); /* XXX: might not be 66MHz */ else i8xx_clock(48000, &clock); } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) { clock.p1 = 2; } else { clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; } if (dpll & PLL_P2_DIVIDE_BY_4) clock.p2 = 4; else clock.p2 = 2; i8xx_clock(48000, &clock); } } /* XXX: It would be nice to validate the clocks, but we can't reuse * i830PllIsValid() because it relies on the xf86_config output * configuration being accurate, which it isn't necessarily. */ if (0) i830PrintPll("probed", &clock); return clock.dot; } /** Returns the currently programmed mode of the given pipe. */ DisplayModePtr i830_crtc_mode_get(ScrnInfoPtr pScrn, xf86CrtcPtr crtc) { I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int pipe = intel_crtc->pipe; DisplayModePtr mode; int htot = INREG((pipe == 0) ? HTOTAL_A : HTOTAL_B); int hsync = INREG((pipe == 0) ? HSYNC_A : HSYNC_B); int vtot = INREG((pipe == 0) ? VTOTAL_A : VTOTAL_B); int vsync = INREG((pipe == 0) ? VSYNC_A : VSYNC_B); mode = xcalloc(1, sizeof(DisplayModeRec)); if (mode == NULL) return NULL; mode->Clock = i830_crtc_clock_get(pScrn, crtc); mode->HDisplay = (htot & 0xffff) + 1; mode->HTotal = ((htot & 0xffff0000) >> 16) + 1; mode->HSyncStart = (hsync & 0xffff) + 1; mode->HSyncEnd = ((hsync & 0xffff0000) >> 16) + 1; mode->VDisplay = (vtot & 0xffff) + 1; mode->VTotal = ((vtot & 0xffff0000) >> 16) + 1; mode->VSyncStart = (vsync & 0xffff) + 1; mode->VSyncEnd = ((vsync & 0xffff0000) >> 16) + 1; xf86SetModeDefaultName(mode); xf86SetModeCrtc(mode, 0); return mode; } static const xf86CrtcFuncsRec i830_crtc_funcs = { .dpms = i830_crtc_dpms, .save = NULL, /* XXX */ .restore = NULL, /* XXX */ .lock = i830_crtc_lock, .unlock = i830_crtc_unlock, .mode_fixup = i830_crtc_mode_fixup, .prepare = i830_crtc_prepare, .mode_set = i830_crtc_mode_set, .commit = i830_crtc_commit, .gamma_set = i830_crtc_gamma_set, .shadow_create = i830_crtc_shadow_create, .shadow_allocate = i830_crtc_shadow_allocate, .shadow_destroy = i830_crtc_shadow_destroy, .set_cursor_colors = i830_crtc_set_cursor_colors, .set_cursor_position = i830_crtc_set_cursor_position, .show_cursor = i830_crtc_show_cursor, .hide_cursor = i830_crtc_hide_cursor, /* .load_cursor_image = i830_crtc_load_cursor_image, */ .load_cursor_argb = i830_crtc_load_cursor_argb, .destroy = NULL, /* XXX */ }; void i830_crtc_init(ScrnInfoPtr pScrn, int pipe) { xf86CrtcPtr crtc; I830CrtcPrivatePtr intel_crtc; int i; crtc = xf86CrtcCreate (pScrn, &i830_crtc_funcs); if (crtc == NULL) return; intel_crtc = xnfcalloc (sizeof (I830CrtcPrivateRec), 1); intel_crtc->pipe = pipe; intel_crtc->dpms_mode = DPMSModeOff; intel_crtc->plane = pipe; /* Initialize the LUTs for when we turn on the CRTC. */ for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; intel_crtc->lut_g[i] = i; intel_crtc->lut_b[i] = i; } crtc->driver_private = intel_crtc; }