/* -*- c-basic-offset: 4 -*- */ /* * Copyright © 2006 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * Authors: * Eric Anholt * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include #include #include #include "xf86.h" #include "i830.h" #include "i830_bios.h" #include "i830_display.h" #include "i830_debug.h" #include "i830_xf86Modes.h" typedef struct { /* given values */ int n; int m1, m2; int p1, p2; /* derived values */ int dot; int vco; int m; int p; } intel_clock_t; typedef struct { int min, max; } intel_range_t; typedef struct { int dot_limit; int p2_slow, p2_fast; } intel_p2_t; #define INTEL_P2_NUM 2 typedef struct { intel_range_t dot, vco, n, m, m1, m2, p, p1; intel_p2_t p2; } intel_limit_t; #define I8XX_DOT_MIN 25000 #define I8XX_DOT_MAX 350000 #define I8XX_VCO_MIN 930000 #define I8XX_VCO_MAX 1400000 #define I8XX_N_MIN 3 #define I8XX_N_MAX 16 #define I8XX_M_MIN 96 #define I8XX_M_MAX 140 #define I8XX_M1_MIN 18 #define I8XX_M1_MAX 26 #define I8XX_M2_MIN 6 #define I8XX_M2_MAX 16 #define I8XX_P_MIN 4 #define I8XX_P_MAX 128 #define I8XX_P1_MIN 0 #define I8XX_P1_MAX 30 #define I8XX_P2_SLOW 1 #define I8XX_P2_FAST 0 #define I8XX_P2_SLOW_LIMIT 165000 #define I9XX_DOT_MIN 20000 #define I9XX_DOT_MAX 400000 #define I9XX_VCO_MIN 1400000 #define I9XX_VCO_MAX 2800000 #define I9XX_N_MIN 3 #define I9XX_N_MAX 8 #define I9XX_M_MIN 70 #define I9XX_M_MAX 120 #define I9XX_M1_MIN 10 #define I9XX_M1_MAX 20 #define I9XX_M2_MIN 5 #define I9XX_M2_MAX 9 #define I9XX_P_SDVO_DAC_MIN 5 #define I9XX_P_SDVO_DAC_MAX 80 #define I9XX_P_LVDS_MIN 7 #define I9XX_P_LVDS_MAX 98 #define I9XX_P1_MIN 1 #define I9XX_P1_MAX 8 #define I9XX_P2_SDVO_DAC_SLOW 10 #define I9XX_P2_SDVO_DAC_FAST 5 #define I9XX_P2_SDVO_DAC_SLOW_LIMIT 200000 #define I9XX_P2_LVDS_SLOW 14 #define I9XX_P2_LVDS_FAST 7 #define I9XX_P2_LVDS_SLOW_LIMIT 112000 #define INTEL_LIMIT_I8XX 0 #define INTEL_LIMIT_I9XX_SDVO_DAC 1 #define INTEL_LIMIT_I9XX_LVDS 2 static const intel_limit_t intel_limits[] = { { .dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX }, .vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX }, .n = { .min = I8XX_N_MIN, .max = I8XX_N_MAX }, .m = { .min = I8XX_M_MIN, .max = I8XX_M_MAX }, .m1 = { .min = I8XX_M1_MIN, .max = I8XX_M1_MAX }, .m2 = { .min = I8XX_M2_MIN, .max = I8XX_M2_MAX }, .p = { .min = I8XX_P_MIN, .max = I8XX_P_MAX }, .p1 = { .min = I8XX_P1_MIN, .max = I8XX_P1_MAX }, .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, }, { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, .p = { .min = I9XX_P_SDVO_DAC_MIN, .max = I9XX_P_SDVO_DAC_MAX }, .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, }, { .dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX }, .vco = { .min = I9XX_VCO_MIN, .max = I9XX_VCO_MAX }, .n = { .min = I9XX_N_MIN, .max = I9XX_N_MAX }, .m = { .min = I9XX_M_MIN, .max = I9XX_M_MAX }, .m1 = { .min = I9XX_M1_MIN, .max = I9XX_M1_MAX }, .m2 = { .min = I9XX_M2_MIN, .max = I9XX_M2_MAX }, .p = { .min = I9XX_P_LVDS_MIN, .max = I9XX_P_LVDS_MAX }, .p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX }, /* The single-channel range is 25-112Mhz, and dual-channel * is 80-224Mhz. Prefer single channel as much as possible. */ .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, }, }; static const intel_limit_t *intel_limit (xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); const intel_limit_t *limit; if (IS_I9XX(pI830)) { if (i830PipeHasType (crtc, I830_OUTPUT_LVDS)) limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS]; else limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC]; } else limit = &intel_limits[INTEL_LIMIT_I8XX]; return limit; } /** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ static void i8xx_clock(int refclk, intel_clock_t *clock) { clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = (clock->p1 + 2) << (clock->p2 + 1); clock->vco = refclk * clock->m / (clock->n + 2); clock->dot = clock->vco / clock->p; } /** Derive the pixel clock for the given refclk and divisors for 9xx chips. */ static void i9xx_clock(int refclk, intel_clock_t *clock) { clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / (clock->n + 2); clock->dot = clock->vco / clock->p; } static void intel_clock(I830Ptr pI830, int refclk, intel_clock_t *clock) { if (IS_I9XX(pI830)) return i9xx_clock (refclk, clock); else return i8xx_clock (refclk, clock); } static void i830PrintPll(char *prefix, intel_clock_t *clock) { ErrorF("%s: dotclock %d vco %d ((m %d, m1 %d, m2 %d), n %d, (p %d, p1 %d, p2 %d))\n", prefix, clock->dot, clock->vco, clock->m, clock->m1, clock->m2, clock->n, clock->p, clock->p1, clock->p2); } /** * Returns whether any output on the specified pipe is of the specified type */ Bool i830PipeHasType (xf86CrtcPtr crtc, int type) { ScrnInfoPtr pScrn = crtc->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); int i; for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; if (output->crtc == crtc) { I830OutputPrivatePtr intel_output = output->driver_private; if (intel_output->type == type) return TRUE; } } return FALSE; } #define i830PllInvalid(s) { /* ErrorF (s) */; return FALSE; } /** * Returns whether the given set of divisors are valid for a given refclk with * the given outputs. */ static Bool i830PllIsValid(xf86CrtcPtr crtc, intel_clock_t *clock) { const intel_limit_t *limit = intel_limit (crtc); if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) i830PllInvalid ("p1 out of range\n"); if (clock->p < limit->p.min || limit->p.max < clock->p) i830PllInvalid ("p out of range\n"); if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) i830PllInvalid ("m2 out of range\n"); if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) i830PllInvalid ("m1 out of range\n"); if (clock->m1 <= clock->m2) i830PllInvalid ("m1 <= m2\n"); if (clock->m < limit->m.min || limit->m.max < clock->m) i830PllInvalid ("m out of range\n"); if (clock->n < limit->n.min || limit->n.max < clock->n) i830PllInvalid ("n out of range\n"); if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) i830PllInvalid ("vco out of range\n"); /* XXX: We may need to be checking "Dot clock" depending on the multiplier, * output, etc., rather than just a single range. */ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) i830PllInvalid ("dot out of range\n"); return TRUE; } /** * Returns a set of divisors for the desired target clock with the given refclk, * or FALSE. Divisor values are the actual divisors for */ static Bool i830FindBestPLL(xf86CrtcPtr crtc, int target, int refclk, intel_clock_t *best_clock) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); intel_clock_t clock; const intel_limit_t *limit = intel_limit (crtc); int err = target; if (target < limit->p2.dot_limit) clock.p2 = limit->p2.p2_slow; else clock.p2 = limit->p2.p2_fast; memset (best_clock, 0, sizeof (*best_clock)); for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { for (clock.m2 = limit->m2.min; clock.m2 < clock.m1 && clock.m2 <= limit->m2.max; clock.m2++) { for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; clock.p1++) { int this_err; intel_clock (pI830, refclk, &clock); if (!i830PllIsValid(crtc, &clock)) continue; this_err = abs(clock.dot - target); if (this_err < err) { *best_clock = clock; err = this_err; } } } } } return (err != target); } void i830WaitForVblank(ScrnInfoPtr pScreen) { /* Wait for 20ms, i.e. one cycle at 50hz. */ usleep(20000); } void i830PipeSetBase(xf86CrtcPtr crtc, int x, int y) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int pipe = intel_crtc->pipe; unsigned long Start; int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE); int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF); if (crtc->rotation != RR_Rotate_0) { Start = intel_crtc->rotate_mem.Start; } else if (I830IsPrimary(pScrn)) { Start = pI830->FrontBuffer.Start; } else { I830Ptr pI8301 = I830PTR(pI830->entityPrivate->pScrn_1); Start = pI8301->FrontBuffer2.Start; } if (IS_I965G(pI830)) { OUTREG(dspbase, ((y * pScrn->displayWidth + x) * pI830->cpp)); (void) INREG(dspbase); OUTREG(dspsurf, Start); (void) INREG(dspsurf); } else { OUTREG(dspbase, Start + ((y * pScrn->displayWidth + x) * pI830->cpp)); (void) INREG(dspbase); } } /** * In the current world order, there are lists of modes per output, which may * or may not include the mode that was asked to be set by XFree86's mode * selection. Find the closest one, in the following preference order: * * - Equality * - Closer in size to the requested mode, but no larger * - Closer in refresh rate to the requested mode. */ DisplayModePtr i830PipeFindClosestMode(xf86CrtcPtr crtc, DisplayModePtr pMode) { ScrnInfoPtr pScrn = crtc->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); DisplayModePtr pBest = NULL, pScan = NULL; int i; /* Assume that there's only one output connected to the given CRTC. */ for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; if (output->crtc == crtc && output->probed_modes != NULL) { pScan = output->probed_modes; break; } } /* If the pipe doesn't have any detected modes, just let the system try to * spam the desired mode in. */ if (pScan == NULL) { I830CrtcPrivatePtr intel_crtc = crtc->driver_private; xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "No pipe mode list for pipe %d," "continuing with desired mode\n", intel_crtc->pipe); return pMode; } for (; pScan != NULL; pScan = pScan->next) { assert(pScan->VRefresh != 0.0); /* If there's an exact match, we're done. */ if (xf86ModesEqual(pScan, pMode)) { pBest = pMode; break; } /* Reject if it's larger than the desired mode. */ if (pScan->HDisplay > pMode->HDisplay || pScan->VDisplay > pMode->VDisplay) { continue; } if (pBest == NULL) { pBest = pScan; continue; } /* Find if it's closer to the right size than the current best * option. */ if ((pScan->HDisplay > pBest->HDisplay && pScan->VDisplay >= pBest->VDisplay) || (pScan->HDisplay >= pBest->HDisplay && pScan->VDisplay > pBest->VDisplay)) { pBest = pScan; continue; } /* Find if it's still closer to the right refresh than the current * best resolution. */ if (pScan->HDisplay == pBest->HDisplay && pScan->VDisplay == pBest->VDisplay && (fabs(pScan->VRefresh - pMode->VRefresh) < fabs(pBest->VRefresh - pMode->VRefresh))) { pBest = pScan; } } if (pBest == NULL) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "No suitable mode found to program for the pipe.\n" " continuing with desired mode %dx%d@%.1f\n", pMode->HDisplay, pMode->VDisplay, pMode->VRefresh); } else if (!xf86ModesEqual(pBest, pMode)) { I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int pipe = intel_crtc->pipe; xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Choosing pipe %d's mode %dx%d@%.1f instead of xf86 " "mode %dx%d@%.1f\n", pipe, pBest->HDisplay, pBest->VDisplay, pBest->VRefresh, pMode->HDisplay, pMode->VDisplay, pMode->VRefresh); pMode = pBest; } return pMode; } /** * Sets the power management mode of the pipe and plane. * * This code should probably grow support for turning the cursor off and back * on appropriately at the same time as we're turning the pipe off/on. */ static void i830_crtc_dpms(xf86CrtcPtr crtc, int mode) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int pipe = intel_crtc->pipe; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; CARD32 temp; /* XXX: When our outputs are all unaware of DPMS modes other than off and * on, we should map those modes to DPMSModeOff in the CRTC. */ switch (mode) { case DPMSModeOn: case DPMSModeStandby: case DPMSModeSuspend: /* Enable the DPLL */ temp = INREG(dpll_reg); if ((temp & DPLL_VCO_ENABLE) == 0) { OUTREG(dpll_reg, temp); /* Wait for the clocks to stabilize. */ usleep(150); OUTREG(dpll_reg, temp | DPLL_VCO_ENABLE); /* Wait for the clocks to stabilize. */ usleep(150); OUTREG(dpll_reg, temp | DPLL_VCO_ENABLE); /* Wait for the clocks to stabilize. */ usleep(150); } /* Enable the pipe */ temp = INREG(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) == 0) OUTREG(pipeconf_reg, temp | PIPEACONF_ENABLE); /* Enable the plane */ temp = INREG(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) == 0) { OUTREG(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ OUTREG(dspbase_reg, INREG(dspbase_reg)); } i830_crtc_load_lut(crtc); /* Give the overlay scaler a chance to enable if it's on this pipe */ i830_crtc_dpms_video(crtc, TRUE); break; case DPMSModeOff: /* Give the overlay scaler a chance to disable if it's on this pipe */ i830_crtc_dpms_video(crtc, FALSE); /* Disable the VGA plane that we never use */ OUTREG(VGACNTRL, VGA_DISP_DISABLE); /* Disable display plane */ temp = INREG(dspcntr_reg); if ((temp & DISPLAY_PLANE_ENABLE) != 0) { OUTREG(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE); /* Flush the plane changes */ OUTREG(dspbase_reg, INREG(dspbase_reg)); } if (!IS_I9XX(pI830)) { /* Wait for vblank for the disable to take effect */ i830WaitForVblank(pScrn); } /* Next, disable display pipes */ temp = INREG(pipeconf_reg); if ((temp & PIPEACONF_ENABLE) != 0) OUTREG(pipeconf_reg, temp & ~PIPEACONF_ENABLE); /* Wait for vblank for the disable to take effect. */ i830WaitForVblank(pScrn); temp = INREG(dpll_reg); if ((temp & DPLL_VCO_ENABLE) != 0) OUTREG(dpll_reg, temp & ~DPLL_VCO_ENABLE); /* Wait for the clocks to turn off. */ usleep(150); break; } } static Bool i830_crtc_lock (xf86CrtcPtr crtc) { /* Sync the engine before mode switch */ i830WaitSync(crtc->scrn); #ifdef XF86DRI return I830DRILock(crtc->scrn); #else return FALSE; #endif } static void i830_crtc_unlock (xf86CrtcPtr crtc) { #ifdef XF86DRI I830DRIUnlock (crtc->scrn); #endif } static Bool i830_crtc_mode_fixup(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayModePtr adjusted_mode) { return TRUE; } /** * Sets up registers for the given mode/adjusted_mode pair. * * The clocks, CRTCs and outputs attached to this CRTC must be off. * * This shouldn't enable any clocks, CRTCs, or outputs, but they should * be easily turned on/off after this. */ static void i830_crtc_mode_set(xf86CrtcPtr crtc, DisplayModePtr mode, DisplayModePtr adjusted_mode, int x, int y) { ScrnInfoPtr pScrn = crtc->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int pipe = intel_crtc->pipe; int fp_reg = (pipe == 0) ? FPA0 : FPB0; int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD; int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; int dspstride_reg = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; int i; int refclk; intel_clock_t clock; CARD32 dpll = 0, fp = 0, dspcntr, pipeconf; Bool ok, is_sdvo = FALSE, is_dvo = FALSE; Bool is_crt = FALSE, is_lvds = FALSE, is_tv = FALSE; /* Set up some convenient bools for what outputs are connected to * our pipe, used in DPLL setup. */ for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; I830OutputPrivatePtr intel_output = output->driver_private; if (output->crtc != crtc) continue; switch (intel_output->type) { case I830_OUTPUT_LVDS: is_lvds = TRUE; break; case I830_OUTPUT_SDVO: is_sdvo = TRUE; break; case I830_OUTPUT_DVO: is_dvo = TRUE; break; case I830_OUTPUT_TVOUT: is_tv = TRUE; break; case I830_OUTPUT_ANALOG: is_crt = TRUE; break; } } if (IS_I9XX(pI830)) { refclk = 96000; } else { refclk = 48000; } ok = i830FindBestPLL(crtc, adjusted_mode->Clock, refclk, &clock); if (!ok) FatalError("Couldn't find PLL settings for mode!\n"); fp = clock.n << 16 | clock.m1 << 8 | clock.m2; dpll = DPLL_VGA_MODE_DIS; if (IS_I9XX(pI830)) { if (is_lvds) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; if (is_sdvo) { dpll |= DPLL_DVO_HIGH_SPEED; if (IS_I945G(pI830) || IS_I945GM(pI830)) { int sdvo_pixel_multiply = adjusted_mode->Clock / mode->Clock; dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; } } /* compute bitmask from p1 value */ dpll |= (1 << (clock.p1 - 1)) << 16; switch (clock.p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; break; case 7: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; break; case 10: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; break; case 14: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } if (IS_I965G(pI830)) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); } else { dpll |= clock.p1 << 16; dpll |= clock.p2 << 23; } if (is_tv) { /* XXX: just matching BIOS for now */ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; } #if 0 else if (is_lvds) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; #endif else dpll |= PLL_REF_INPUT_DREFCLK; /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; switch (pScrn->bitsPerPixel) { case 8: dspcntr |= DISPPLANE_8BPP; break; case 16: if (pScrn->depth == 15) dspcntr |= DISPPLANE_15_16BPP; else dspcntr |= DISPPLANE_16BPP; break; case 32: dspcntr |= DISPPLANE_32BPP_NO_ALPHA; break; default: FatalError("unknown display bpp\n"); } if (pipe == 0) dspcntr |= DISPPLANE_SEL_PIPE_A; else dspcntr |= DISPPLANE_SEL_PIPE_B; pipeconf = INREG(pipeconf_reg); if (pipe == 0) { /* * The docs say this is needed when the dot clock is > 90% of the * core speed. Core speeds are indicated by bits in the PCI * config space, but that's a pain to go read, so we just guess * based on the hardware age. AGP hardware is assumed to run * at 133MHz while PCI-E hardware is assumed to run at 200MHz */ int core_clock; if (IS_I9XX(pI830)) core_clock = 200000; else core_clock = 133000; if (mode->Clock > core_clock * 9 / 10) pipeconf |= PIPEACONF_DOUBLE_WIDE; else pipeconf &= ~PIPEACONF_DOUBLE_WIDE; } #if 1 dspcntr |= DISPLAY_PLANE_ENABLE; pipeconf |= PIPEACONF_ENABLE; dpll |= DPLL_VCO_ENABLE; #endif if (is_lvds) { /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. */ OUTREG(LVDS, INREG(LVDS) | LVDS_PORT_EN | LVDS_PIPEB_SELECT); } /* Disable the panel fitter if it was on our pipe */ if (!IS_I830(pI830) && ((INREG(PFIT_CONTROL) >> 29) & 0x3) == pipe) OUTREG(PFIT_CONTROL, 0); i830PrintPll("chosen", &clock); ErrorF("clock regs: 0x%08x, 0x%08x\n", (int)dpll, (int)fp); if (dpll & DPLL_VCO_ENABLE) { OUTREG(fp_reg, fp); OUTREG(dpll_reg, dpll & ~DPLL_VCO_ENABLE); usleep(150); } OUTREG(fp_reg, fp); OUTREG(dpll_reg, dpll); /* Wait for the clocks to stabilize. */ usleep(150); if (IS_I965G(pI830)) { int sdvo_pixel_multiply = adjusted_mode->Clock / mode->Clock; OUTREG(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT)); } else { /* write it again -- the BIOS does, after all */ OUTREG(dpll_reg, dpll); } /* Wait for the clocks to stabilize. */ usleep(150); OUTREG(htot_reg, (adjusted_mode->CrtcHDisplay - 1) | ((adjusted_mode->CrtcHTotal - 1) << 16)); OUTREG(hblank_reg, (adjusted_mode->CrtcHBlankStart - 1) | ((adjusted_mode->CrtcHBlankEnd - 1) << 16)); OUTREG(hsync_reg, (adjusted_mode->CrtcHSyncStart - 1) | ((adjusted_mode->CrtcHSyncEnd - 1) << 16)); OUTREG(vtot_reg, (adjusted_mode->CrtcVDisplay - 1) | ((adjusted_mode->CrtcVTotal - 1) << 16)); OUTREG(vblank_reg, (adjusted_mode->CrtcVBlankStart - 1) | ((adjusted_mode->CrtcVBlankEnd - 1) << 16)); OUTREG(vsync_reg, (adjusted_mode->CrtcVSyncStart - 1) | ((adjusted_mode->CrtcVSyncEnd - 1) << 16)); OUTREG(dspstride_reg, pScrn->displayWidth * pI830->cpp); /* pipesrc and dspsize control the size that is scaled from, which should * always be the user's requested size. */ OUTREG(dspsize_reg, ((mode->VDisplay - 1) << 16) | (mode->HDisplay - 1)); OUTREG(dsppos_reg, 0); OUTREG(pipesrc_reg, ((mode->HDisplay - 1) << 16) | (mode->VDisplay - 1)); OUTREG(pipeconf_reg, pipeconf); i830WaitForVblank(pScrn); OUTREG(dspcntr_reg, dspcntr); /* Flush the plane changes */ i830PipeSetBase(crtc, x, y); i830WaitForVblank(pScrn); } /** Loads the palette/gamma unit for the CRTC with the prepared values */ void i830_crtc_load_lut(xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B; int i; /* The clocks have to be on to load the palette. */ if (!crtc->enabled) return; for (i = 0; i < 256; i++) { OUTREG(palreg + 4 * i, (intel_crtc->lut_r[i] << 16) | (intel_crtc->lut_g[i] << 8) | intel_crtc->lut_b[i]); } } /** Sets the color ramps on behalf of RandR */ static void i830_crtc_gamma_set(xf86CrtcPtr crtc, CARD16 *red, CARD16 *green, CARD16 *blue, int size) { I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int i; assert(size == 256); for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = red[i] >> 8; intel_crtc->lut_g[i] = green[i] >> 8; intel_crtc->lut_b[i] = blue[i] >> 8; } i830_crtc_load_lut(crtc); } /** * Creates a locked-in-framebuffer pixmap of the given width and height for * this CRTC's rotated shadow framebuffer. * * The current implementation uses fixed buffers allocated at startup at the * maximal size. */ static PixmapPtr i830_crtc_shadow_create(xf86CrtcPtr crtc, int width, int height) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; unsigned long rotate_pitch; PixmapPtr rotate_pixmap; pointer rotate_offset; if (intel_crtc->rotate_mem.Start == 0) return NULL; rotate_pitch = pI830->displayWidth * pI830->cpp; rotate_offset = pI830->FbBase + intel_crtc->rotate_mem.Start; rotate_pixmap = GetScratchPixmapHeader(pScrn->pScreen, width, height, pScrn->depth, pScrn->bitsPerPixel, rotate_pitch, rotate_offset); return rotate_pixmap; } static void i830_crtc_shadow_destroy(xf86CrtcPtr crtc, PixmapPtr rotate_pixmap) { FreeScratchPixmapHeader(rotate_pixmap); } /** * This function configures the screens in clone mode on * all active outputs using a mode similar to the specified mode. */ Bool i830SetMode(ScrnInfoPtr pScrn, DisplayModePtr pMode, Rotation rotation) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(pScrn); Bool ok = TRUE; xf86CrtcPtr crtc = config->output[config->compat_output]->crtc; DPRINTF(PFX, "i830SetMode\n"); if (crtc && crtc->enabled) { ok = xf86CrtcSetMode(crtc, i830PipeFindClosestMode(crtc, pMode), rotation, 0, 0); if (!ok) goto done; crtc->desiredMode = *pMode; } xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Mode bandwidth is %d Mpixel/s\n", (int)(pMode->HDisplay * pMode->VDisplay * pMode->VRefresh / 1000000)); xf86DisableUnusedFunctions(pScrn); i830DescribeOutputConfiguration(pScrn); #ifdef XF86DRI I830DRISetVBlankInterrupt (pScrn, TRUE); #endif done: i830DumpRegs (pScrn); i830_sdvo_dump(pScrn); return ok; } void i830DescribeOutputConfiguration(ScrnInfoPtr pScrn) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830Ptr pI830 = I830PTR(pScrn); int i; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Output configuration:\n"); for (i = 0; i < xf86_config->num_crtc; i++) { xf86CrtcPtr crtc = xf86_config->crtc[i]; CARD32 dspcntr = INREG(DSPACNTR + (DSPBCNTR - DSPACNTR) * i); CARD32 pipeconf = INREG(PIPEACONF + (PIPEBCONF - PIPEACONF) * i); Bool hw_plane_enable = (dspcntr & DISPLAY_PLANE_ENABLE) != 0; Bool hw_pipe_enable = (pipeconf & PIPEACONF_ENABLE) != 0; xf86DrvMsg(pScrn->scrnIndex, X_INFO, " Pipe %c is %s\n", 'A' + i, crtc->enabled ? "on" : "off"); xf86DrvMsg(pScrn->scrnIndex, X_INFO, " Display plane %c is now %s and connected to pipe %c.\n", 'A' + i, crtc->enabled ? "enabled" : "disabled", dspcntr & DISPPLANE_SEL_PIPE_MASK ? 'B' : 'A'); if (hw_pipe_enable != crtc->enabled) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, " Hardware claims pipe %c is %s while software " "believes it is %s\n", 'A' + i, hw_pipe_enable ? "on" : "off", crtc->enabled ? "on" : "off"); } if (hw_plane_enable != crtc->enabled) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, " Hardware claims plane %c is %s while software " "believes it is %s\n", 'A' + i, hw_plane_enable ? "on" : "off", crtc->enabled ? "on" : "off"); } } for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; xf86CrtcPtr crtc = output->crtc; I830CrtcPrivatePtr intel_crtc = crtc ? crtc->driver_private : NULL; xf86DrvMsg(pScrn->scrnIndex, X_INFO, " Output %s is connected to pipe %s\n", output->name, intel_crtc == NULL ? "none" : (intel_crtc->pipe == 0 ? "A" : "B")); } } /** * Get a pipe with a simple mode set on it for doing load-based monitor * detection. * * It will be up to the load-detect code to adjust the pipe as appropriate for * its requirements. The pipe will be connected to no other outputs. * * Currently this code will only succeed if there is a pipe with no outputs * configured for it. In the future, it could choose to temporarily disable * some outputs to free up a pipe for its use. * * \return crtc, or NULL if no pipes are available. */ xf86CrtcPtr i830GetLoadDetectPipe(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830OutputPrivatePtr intel_output = output->driver_private; xf86CrtcPtr crtc; int i; if (output->crtc) return output->crtc; for (i = 0; i < xf86_config->num_crtc; i++) if (!xf86CrtcInUse (xf86_config->crtc[i])) break; if (i == xf86_config->num_crtc) return NULL; crtc = xf86_config->crtc[i]; output->crtc = crtc; intel_output->load_detect_temp = TRUE; return crtc; } void i830ReleaseLoadDetectPipe(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; I830OutputPrivatePtr intel_output = output->driver_private; if (intel_output->load_detect_temp) { output->crtc = NULL; intel_output->load_detect_temp = FALSE; xf86DisableUnusedFunctions(pScrn); } } static const xf86CrtcFuncsRec i830_crtc_funcs = { .dpms = i830_crtc_dpms, .save = NULL, /* XXX */ .restore = NULL, /* XXX */ .lock = i830_crtc_lock, .unlock = i830_crtc_unlock, .mode_fixup = i830_crtc_mode_fixup, .mode_set = i830_crtc_mode_set, .gamma_set = i830_crtc_gamma_set, .shadow_create = i830_crtc_shadow_create, .shadow_destroy = i830_crtc_shadow_destroy, .destroy = NULL, /* XXX */ }; void i830_crtc_init(ScrnInfoPtr pScrn, int pipe) { xf86CrtcPtr crtc; I830CrtcPrivatePtr intel_crtc; int i; crtc = xf86CrtcCreate (pScrn, &i830_crtc_funcs); if (crtc == NULL) return; intel_crtc = xnfcalloc (sizeof (I830CrtcPrivateRec), 1); intel_crtc->pipe = pipe; /* Initialize the LUTs for when we turn on the CRTC. */ for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; intel_crtc->lut_g[i] = i; intel_crtc->lut_b[i] = i; } crtc->driver_private = intel_crtc; }