/************************************************************************** Copyright 2006 Dave Airlie All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation on the rights to use, copy, modify, merge, publish, distribute, sub license, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. ****** ********************************************************************/ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "xf86.h" #include "i830.h" #include "i810_reg.h" #include "sil164/sil164.h" #include "ch7xxx/ch7xxx.h" static const char *SIL164Symbols[] = { "Sil164VidOutput", NULL }; static const char *CH7xxxSymbols[] = { "CH7xxxVidOutput", NULL }; /* driver list */ struct _I830DVODriver i830_dvo_drivers[] = { { I830_DVO_CHIP_TMDS, "sil164", "SIL164VidOutput", (SIL164_ADDR_1<<1), SIL164Symbols, NULL , NULL, NULL}, { I830_DVO_CHIP_TMDS | I830_DVO_CHIP_TVOUT, "ch7xxx", "CH7xxxVidOutput", (CH7xxx_ADDR_1<<1), CH7xxxSymbols, NULL , NULL, NULL} }; #define I830_NUM_DVO_DRIVERS (sizeof(i830_dvo_drivers)/sizeof(struct _I830DVODriver)) static void i830_dvo_dpms(ScrnInfoPtr pScrn, I830OutputPtr output, int mode) { if (mode == DPMSModeOn) output->i2c_drv->vid_rec->Power(output->i2c_drv->dev_priv, TRUE); else output->i2c_drv->vid_rec->Power(output->i2c_drv->dev_priv, FALSE); } static void i830_dvo_save(ScrnInfoPtr pScrn, I830OutputPtr output) { I830Ptr pI830 = I830PTR(pScrn); /* Each output should probably just save the registers it touches, but for * now, use more overkill. */ pI830->saveDVOA = INREG(DVOA); pI830->saveDVOB = INREG(DVOB); pI830->saveDVOC = INREG(DVOC); output->i2c_drv->vid_rec->SaveRegs(output->i2c_drv->dev_priv); } static void i830_dvo_restore(ScrnInfoPtr pScrn, I830OutputPtr output) { I830Ptr pI830 = I830PTR(pScrn); OUTREG(DVOA, pI830->saveDVOA); OUTREG(DVOB, pI830->saveDVOB); OUTREG(DVOC, pI830->saveDVOC); output->i2c_drv->vid_rec->RestoreRegs(output->i2c_drv->dev_priv); } static int i830_dvo_mode_valid(ScrnInfoPtr pScrn, I830OutputPtr output, DisplayModePtr pMode) { if (output->i2c_drv->vid_rec->ModeValid(output->i2c_drv->dev_priv, pMode)) return MODE_OK; else return MODE_BAD; } static void i830_dvo_pre_set_mode(ScrnInfoPtr pScrn, I830OutputPtr output, DisplayModePtr pMode) { I830Ptr pI830 = I830PTR(pScrn); output->i2c_drv->vid_rec->Mode(output->i2c_drv->dev_priv, pMode); OUTREG(DVOC, INREG(DVOC) & ~DVO_ENABLE); } static void i830_dvo_post_set_mode(ScrnInfoPtr pScrn, I830OutputPtr output, DisplayModePtr pMode) { I830Ptr pI830 = I830PTR(pScrn); CARD32 dvo; int dpll_reg = (output->pipe == 0) ? DPLL_A : DPLL_B; /* Save the data order, since I don't know what it should be set to. */ dvo = INREG(DVOC) & (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG); dvo |= DVO_ENABLE; dvo |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE | DVO_BLANK_ACTIVE_HIGH; if (output->pipe == 1) dvo |= DVO_PIPE_B_SELECT; if (pMode->Flags & V_PHSYNC) dvo |= DVO_HSYNC_ACTIVE_HIGH; if (pMode->Flags & V_PVSYNC) dvo |= DVO_VSYNC_ACTIVE_HIGH; OUTREG(dpll_reg, INREG(dpll_reg) | DPLL_DVO_HIGH_SPEED); /*OUTREG(DVOB_SRCDIM, (pMode->HDisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | (pMode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/ OUTREG(DVOC_SRCDIM, (pMode->HDisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | (pMode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT)); /*OUTREG(DVOB, dvo);*/ OUTREG(DVOC, dvo); } static Bool I830I2CDetectDVOControllers(ScrnInfoPtr pScrn, I2CBusPtr pI2CBus, struct _I830DVODriver **retdrv) { int i; void *ret_ptr; struct _I830DVODriver *drv; for (i = 0; i < I830_NUM_DVO_DRIVERS; i++) { drv = &i830_dvo_drivers[i]; drv->modhandle = xf86LoadSubModule(pScrn, drv->modulename); if (drv->modhandle == NULL) continue; xf86LoaderReqSymLists(drv->symbols, NULL); ret_ptr = NULL; drv->vid_rec = LoaderSymbol(drv->fntablename); if (drv->vid_rec != NULL) ret_ptr = drv->vid_rec->Detect(pI2CBus, drv->address); if (ret_ptr != NULL) { drv->dev_priv = ret_ptr; *retdrv = drv; return TRUE; } xf86UnloadSubModule(drv->modhandle); } return FALSE; } void i830_dvo_init(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); Bool ret; int i = pI830->num_outputs; pI830->output[i].type = I830_OUTPUT_DVO; pI830->output[i].dpms = i830_dvo_dpms; pI830->output[i].save = i830_dvo_save; pI830->output[i].restore = i830_dvo_restore; pI830->output[i].mode_valid = i830_dvo_mode_valid; pI830->output[i].pre_set_mode = i830_dvo_pre_set_mode; pI830->output[i].post_set_mode = i830_dvo_post_set_mode; /* Set up the I2C and DDC buses */ ret = I830I2CInit(pScrn, &pI830->output[i].pI2CBus, GPIOE, "DVOI2C_E"); if (!ret) return; ret = I830I2CInit(pScrn, &pI830->output[i].pDDCBus, GPIOD, "DVODDC_D"); if (!ret) { xf86DestroyI2CBusRec(pI830->output[i].pI2CBus, TRUE, TRUE); return; } /* Now, try to find a controller */ ret = I830I2CDetectDVOControllers(pScrn, pI830->output[i].pI2CBus, &pI830->output[i].i2c_drv); if (ret) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Found i2c %s on %08lX\n", pI830->output[i].i2c_drv->modulename, pI830->output[i].pI2CBus->DriverPrivate.uval); } else { xf86DestroyI2CBusRec(pI830->output[i].pI2CBus, TRUE, TRUE); xf86DestroyI2CBusRec(pI830->output[i].pDDCBus, TRUE, TRUE); return; } pI830->num_outputs++; }