/* * Copyright © 2006 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Authors: * Eric Anholt * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include #include #include #include #include #include #include "xf86.h" #include "i830.h" #include "i830_bios.h" #include "i830_display.h" #include "X11/Xatom.h" struct i830_lvds_priv { /* The BIOS's fixed timings for the LVDS */ DisplayModePtr panel_fixed_mode; /* The panel needs dithering enabled */ Bool panel_wants_dither; /* restore backlight to this value */ int backlight_duty_cycle; void (*set_backlight)(xf86OutputPtr output, int level); int (*get_backlight)(xf86OutputPtr output); int backlight_max; }; #define BACKLIGHT_CLASS "/sys/class/backlight" /* * List of available kernel interfaces in priority order */ static char *backlight_interfaces[] = { "thinkpad_screen", "acpi_video1", "acpi_video0", NULL, }; /* * Must be long enough for BACKLIGHT_CLASS + '/' + longest in above table + * '/' + "max_backlight" */ #define BACKLIGHT_PATH_LEN 80 /* Enough for 8 digits of backlight + '\n' + '\0' */ #define BACKLIGHT_VALUE_LEN 10 static int backlight_index; static Bool i830_kernel_backlight_available(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; struct stat buf; char path[BACKLIGHT_PATH_LEN]; int i; for (i = 0; backlight_interfaces[i] != NULL; i++) { sprintf(path, "%s/%s", BACKLIGHT_CLASS, backlight_interfaces[i]); if (!stat(path, &buf)) { backlight_index = i; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "found backlight control " "method %s\n", path); return 1; } } return 0; } /* Try to figure out which backlight control method to use */ static void i830_set_lvds_backlight_method(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); uint32_t blc_pwm_ctl, blc_pwm_ctl2; enum backlight_control method = BCM_NATIVE; /* Default to native */ if (i830_kernel_backlight_available(output)) { method = BCM_KERNEL; } else if (IS_I965GM(pI830) || IS_IGD_GM(pI830)) { blc_pwm_ctl2 = INREG(BLC_PWM_CTL2); if (blc_pwm_ctl2 & BLM_LEGACY_MODE2) method = BCM_LEGACY; } else { blc_pwm_ctl = INREG(BLC_PWM_CTL); if (blc_pwm_ctl & BLM_LEGACY_MODE) method = BCM_LEGACY; } pI830->backlight_control_method = method; } /* * Native methods */ static void i830_lvds_set_backlight_native(xf86OutputPtr output, int level) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); uint32_t blc_pwm_ctl; blc_pwm_ctl = INREG(BLC_PWM_CTL); blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK; OUTREG(BLC_PWM_CTL, blc_pwm_ctl | (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); } static int i830_lvds_get_backlight_native(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); uint32_t blc_pwm_ctl; blc_pwm_ctl = INREG(BLC_PWM_CTL); blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK; return blc_pwm_ctl; } static int i830_lvds_get_backlight_max_native(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); uint32_t pwm_ctl = INREG(BLC_PWM_CTL); int val; if (IS_I965GM(pI830) || IS_IGD_GM(pI830)) { val = ((pwm_ctl & BACKLIGHT_MODULATION_FREQ_MASK2) >> BACKLIGHT_MODULATION_FREQ_SHIFT2); } else { val = ((pwm_ctl & BACKLIGHT_MODULATION_FREQ_MASK) >> BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; } return val; } /* * Legacy methods */ static void i830_lvds_set_backlight_legacy(xf86OutputPtr output, int level) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); #if XSERVER_LIBPCIACCESS pci_device_cfg_write_u8(pI830->PciInfo, level, LEGACY_BACKLIGHT_BRIGHTNESS); #else pciWriteByte(pI830->PciTag, LEGACY_BACKLIGHT_BRIGHTNESS, level); #endif } static int i830_lvds_get_backlight_legacy(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); uint8_t lbb; #if XSERVER_LIBPCIACCESS pci_device_cfg_read_u8(pI830->PciInfo, &lbb, LEGACY_BACKLIGHT_BRIGHTNESS); #else lbb = pciReadByte(pI830->PciTag, LEGACY_BACKLIGHT_BRIGHTNESS); #endif return lbb; } /* * Combo methods */ static void i830_lvds_set_backlight_combo(xf86OutputPtr output, int level) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); uint32_t blc_pwm_ctl; uint8_t lbb; #if XSERVER_LIBPCIACCESS pci_device_cfg_read_u8(pI830->PciInfo, &lbb, LEGACY_BACKLIGHT_BRIGHTNESS); #else lbb = pciReadByte(pI830->PciTag, LEGACY_BACKLIGHT_BRIGHTNESS); #endif /* * If LBB is zero and we're shooting for a non-zero brightness level, * we have to increase LBB by at least 1. */ if (!lbb && level) { #if XSERVER_LIBPCIACCESS pci_device_cfg_write_u8(pI830->PciInfo, 1, LEGACY_BACKLIGHT_BRIGHTNESS); #else pciWriteByte(pI830->PciTag, LEGACY_BACKLIGHT_BRIGHTNESS, 1); #endif } /* * Don't set the lowest bit in combo configs since it can act as a flag for * max brightness. */ level <<= 1; blc_pwm_ctl = INREG(BLC_PWM_CTL); blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK; OUTREG(BLC_PWM_CTL, blc_pwm_ctl | (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); } static int i830_lvds_get_backlight_combo(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); uint32_t blc_pwm_ctl; blc_pwm_ctl = INREG(BLC_PWM_CTL); blc_pwm_ctl &= BACKLIGHT_DUTY_CYCLE_MASK; /* Since we don't use the low bit when using combo, the value is halved */ return blc_pwm_ctl >> 1; } static int i830_lvds_get_backlight_max_combo(xf86OutputPtr output) { /* Since we don't set the low bit when using combo, the range is halved */ return i830_lvds_get_backlight_max_native(output) >> 1; } /* * Kernel methods */ static void i830_lvds_set_backlight_kernel(xf86OutputPtr output, int level) { ScrnInfoPtr pScrn = output->scrn; char path[BACKLIGHT_PATH_LEN], val[BACKLIGHT_VALUE_LEN]; int fd, len, ret; len = snprintf(val, BACKLIGHT_VALUE_LEN, "%d\n", level); if (len > BACKLIGHT_VALUE_LEN) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "backlight value too large: %d\n", level); return; } sprintf(path, "%s/%s/brightness", BACKLIGHT_CLASS, backlight_interfaces[backlight_index]); fd = open(path, O_RDWR); if (fd == -1) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "failed to open %s for backlight " "control: %s\n", path, strerror(errno)); return; } ret = write(fd, val, len); if (ret == -1) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "write to %s for backlight " "control failed: %s\n", path, strerror(errno)); } close(fd); } static int i830_lvds_get_backlight_kernel(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; char path[BACKLIGHT_PATH_LEN], val[BACKLIGHT_VALUE_LEN]; int fd; sprintf(path, "%s/%s/actual_brightness", BACKLIGHT_CLASS, backlight_interfaces[backlight_index]); fd = open(path, O_RDONLY); if (fd == -1) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "failed to open %s for backlight " "control: %s\n", path, strerror(errno)); return 0; } if (read(fd, val, BACKLIGHT_VALUE_LEN) == -1) goto out_err; close(fd); return atoi(val); out_err: close(fd); return 0; } static int i830_lvds_get_backlight_max_kernel(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; char path[BACKLIGHT_PATH_LEN], val[BACKLIGHT_VALUE_LEN]; int fd, max = 0; sprintf(path, "%s/%s/max_brightness", BACKLIGHT_CLASS, backlight_interfaces[backlight_index]); fd = open(path, O_RDONLY); if (fd == -1) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "failed to open %s for backlight " "control: %s\n", path, strerror(errno)); return 0; } if (read(fd, val, BACKLIGHT_VALUE_LEN) == -1) goto out_err; close(fd); max = atoi(val); return max; out_err: close(fd); return 0; } /** * Sets the power state for the panel. */ static void i830SetLVDSPanelPower(xf86OutputPtr output, Bool on) { I830OutputPrivatePtr intel_output = output->driver_private; struct i830_lvds_priv *dev_priv = intel_output->dev_priv; ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); uint32_t pp_status; if (on) { /* * If we're going from off->on we may need to turn on the backlight. * We should use the saved value whenever possible, but on some * machines 0 is a valid backlight value (due to an external backlight * controller for example), so on them, when turning LVDS back on, * they'll always re-maximize the brightness. */ if (!(INREG(PP_CONTROL) & POWER_TARGET_ON) && dev_priv->backlight_duty_cycle == 0) dev_priv->backlight_duty_cycle = dev_priv->backlight_max; OUTREG(PP_CONTROL, INREG(PP_CONTROL) | POWER_TARGET_ON); do { pp_status = INREG(PP_STATUS); } while ((pp_status & PP_ON) == 0); dev_priv->set_backlight(output, dev_priv->backlight_duty_cycle); } else { /* * Only save the current backlight value if we're going from * on to off. */ if (INREG(PP_CONTROL) & POWER_TARGET_ON) dev_priv->backlight_duty_cycle = dev_priv->get_backlight(output); dev_priv->set_backlight(output, 0); OUTREG(PP_CONTROL, INREG(PP_CONTROL) & ~POWER_TARGET_ON); do { pp_status = INREG(PP_STATUS); } while (pp_status & PP_ON); } } static void i830_lvds_dpms (xf86OutputPtr output, int mode) { if (mode == DPMSModeOn) i830SetLVDSPanelPower(output, TRUE); else i830SetLVDSPanelPower(output, FALSE); /* XXX: We never power down the LVDS pairs. */ } static void i830_lvds_save (xf86OutputPtr output) { I830OutputPrivatePtr intel_output = output->driver_private; struct i830_lvds_priv *dev_priv = intel_output->dev_priv; ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); if (IS_I965GM(pI830) || IS_IGD_GM(pI830)) pI830->saveBLC_PWM_CTL2 = INREG(BLC_PWM_CTL2); pI830->savePP_ON = INREG(LVDSPP_ON); pI830->savePP_OFF = INREG(LVDSPP_OFF); pI830->savePP_CONTROL = INREG(PP_CONTROL); pI830->savePP_CYCLE = INREG(PP_CYCLE); pI830->saveBLC_PWM_CTL = INREG(BLC_PWM_CTL); dev_priv->backlight_duty_cycle = dev_priv->get_backlight(output); } static void i830_lvds_restore(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); if (IS_I965GM(pI830) || IS_IGD_GM(pI830)) OUTREG(BLC_PWM_CTL2, pI830->saveBLC_PWM_CTL2); OUTREG(BLC_PWM_CTL, pI830->saveBLC_PWM_CTL); OUTREG(LVDSPP_ON, pI830->savePP_ON); OUTREG(LVDSPP_OFF, pI830->savePP_OFF); OUTREG(PP_CYCLE, pI830->savePP_CYCLE); OUTREG(PP_CONTROL, pI830->savePP_CONTROL); if (pI830->savePP_CONTROL & POWER_TARGET_ON) i830SetLVDSPanelPower(output, TRUE); else i830SetLVDSPanelPower(output, FALSE); } static int i830_lvds_mode_valid(xf86OutputPtr output, DisplayModePtr pMode) { I830OutputPrivatePtr intel_output = output->driver_private; struct i830_lvds_priv *dev_priv = intel_output->dev_priv; DisplayModePtr pFixedMode = dev_priv->panel_fixed_mode; if (pFixedMode) { if (pMode->HDisplay > pFixedMode->HDisplay) return MODE_PANEL; if (pMode->VDisplay > pFixedMode->VDisplay) return MODE_PANEL; } return MODE_OK; } static Bool i830_lvds_mode_fixup(xf86OutputPtr output, DisplayModePtr mode, DisplayModePtr adjusted_mode) { I830OutputPrivatePtr intel_output = output->driver_private; struct i830_lvds_priv *dev_priv = intel_output->dev_priv; ScrnInfoPtr pScrn = output->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); I830CrtcPrivatePtr intel_crtc = output->crtc->driver_private; int i; for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr other_output = xf86_config->output[i]; if (other_output != output && other_output->crtc == output->crtc) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Can't enable LVDS and another output on the same " "pipe\n"); return FALSE; } } if (intel_crtc->pipe == 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Can't support LVDS on pipe A\n"); return FALSE; } /* If we have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode, * with the panel scaling set up to source from the H/VDisplay * of the original mode. */ if (dev_priv->panel_fixed_mode != NULL) { adjusted_mode->HDisplay = dev_priv->panel_fixed_mode->HDisplay; adjusted_mode->HSyncStart = dev_priv->panel_fixed_mode->HSyncStart; adjusted_mode->HSyncEnd = dev_priv->panel_fixed_mode->HSyncEnd; adjusted_mode->HTotal = dev_priv->panel_fixed_mode->HTotal; adjusted_mode->VDisplay = dev_priv->panel_fixed_mode->VDisplay; adjusted_mode->VSyncStart = dev_priv->panel_fixed_mode->VSyncStart; adjusted_mode->VSyncEnd = dev_priv->panel_fixed_mode->VSyncEnd; adjusted_mode->VTotal = dev_priv->panel_fixed_mode->VTotal; adjusted_mode->Clock = dev_priv->panel_fixed_mode->Clock; xf86SetModeCrtc(adjusted_mode, INTERLACE_HALVE_V); } /* XXX: It would be nice to support lower refresh rates on the * panels to reduce power consumption, and perhaps match the * user's requested refresh rate. */ return TRUE; } static void i830_lvds_mode_set(xf86OutputPtr output, DisplayModePtr mode, DisplayModePtr adjusted_mode) { I830OutputPrivatePtr intel_output = output->driver_private; struct i830_lvds_priv *dev_priv = intel_output->dev_priv; ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); I830CrtcPrivatePtr intel_crtc = output->crtc->driver_private; uint32_t pfit_control; /* The LVDS pin pair will already have been turned on in * i830_crtc_mode_set since it has a large impact on the DPLL settings. */ /* Enable automatic panel scaling for non-native modes so that they fill * the screen. Should be enabled before the pipe is enabled, according to * register description and PRM. */ if (mode->HDisplay != adjusted_mode->HDisplay || mode->VDisplay != adjusted_mode->VDisplay) { pfit_control = PFIT_ENABLE | VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR; } else { pfit_control = 0; } if (!IS_I965G(pI830)) { if (dev_priv->panel_wants_dither) pfit_control |= PANEL_8TO6_DITHER_ENABLE; } else { pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT; } OUTREG(PFIT_CONTROL, pfit_control); } /** * Detect the LVDS connection. * * This always returns OUTPUT_STATUS_CONNECTED. This output should only have * been set up if the LVDS was actually connected anyway. */ static xf86OutputStatus i830_lvds_detect(xf86OutputPtr output) { return XF86OutputStatusConnected; } /** * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. */ static DisplayModePtr i830_lvds_get_modes(xf86OutputPtr output) { I830OutputPrivatePtr intel_output = output->driver_private; struct i830_lvds_priv *dev_priv = intel_output->dev_priv; xf86MonPtr edid_mon; DisplayModePtr modes; edid_mon = xf86OutputGetEDID (output, intel_output->pDDCBus); xf86OutputSetEDID (output, edid_mon); modes = xf86OutputGetEDIDModes (output); if (modes != NULL) return modes; if (!output->MonInfo) { edid_mon = xcalloc (1, sizeof (xf86Monitor)); if (edid_mon) { /* Set wide sync ranges so we get all modes * handed to valid_mode for checking */ edid_mon->det_mon[0].type = DS_RANGES; edid_mon->det_mon[0].section.ranges.min_v = 0; edid_mon->det_mon[0].section.ranges.max_v = 200; edid_mon->det_mon[0].section.ranges.min_h = 0; edid_mon->det_mon[0].section.ranges.max_h = 200; output->MonInfo = edid_mon; } } if (dev_priv->panel_fixed_mode != NULL) return xf86DuplicateMode(dev_priv->panel_fixed_mode); return NULL; } static void i830_lvds_destroy (xf86OutputPtr output) { I830OutputPrivatePtr intel_output = output->driver_private; if (intel_output) { struct i830_lvds_priv *dev_priv = intel_output->dev_priv; xf86DeleteMode (&dev_priv->panel_fixed_mode, dev_priv->panel_fixed_mode); xfree (intel_output); } } #ifdef RANDR_12_INTERFACE #define BACKLIGHT_NAME "BACKLIGHT" static Atom backlight_atom; /* * Backlight control lets the user select how the driver should manage * backlight changes: using the legacy interface, the native interface, * or not at all. */ #define BACKLIGHT_CONTROL_NAME "BACKLIGHT_CONTROL" #define NUM_BACKLIGHT_CONTROL_METHODS 4 static char *backlight_control_names[] = { "native", "legacy", "combination", "kernel", }; static Atom backlight_control_atom; static Atom backlight_control_name_atoms[NUM_BACKLIGHT_CONTROL_METHODS]; static int i830_backlight_control_lookup(char *name) { int i; for (i = 0; i < NUM_BACKLIGHT_CONTROL_METHODS; i++) if (!strcmp(name, backlight_control_names[i])) return i; return -1; } static Bool i830_lvds_set_backlight_control(xf86OutputPtr output) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); I830OutputPrivatePtr intel_output = output->driver_private; struct i830_lvds_priv *dev_priv = intel_output->dev_priv; switch (pI830->backlight_control_method) { case BCM_NATIVE: dev_priv->set_backlight = i830_lvds_set_backlight_native; dev_priv->get_backlight = i830_lvds_get_backlight_native; dev_priv->backlight_max = i830_lvds_get_backlight_max_native(output); break; case BCM_LEGACY: dev_priv->set_backlight = i830_lvds_set_backlight_legacy; dev_priv->get_backlight = i830_lvds_get_backlight_legacy; dev_priv->backlight_max = 0xff; break; case BCM_COMBO: dev_priv->set_backlight = i830_lvds_set_backlight_combo; dev_priv->get_backlight = i830_lvds_get_backlight_combo; dev_priv->backlight_max = i830_lvds_get_backlight_max_combo(output); break; case BCM_KERNEL: dev_priv->set_backlight = i830_lvds_set_backlight_kernel; dev_priv->get_backlight = i830_lvds_get_backlight_kernel; dev_priv->backlight_max = i830_lvds_get_backlight_max_kernel(output); break; default: /* * Should be impossible to get here unless the caller set a bogus * backlight_control_method */ xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "error: bad backlight control " "method\n"); break; } return Success; } #endif /* RANDR_12_INTERFACE */ static void i830_lvds_create_resources(xf86OutputPtr output) { #ifdef RANDR_12_INTERFACE ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); I830OutputPrivatePtr intel_output = output->driver_private; struct i830_lvds_priv *dev_priv = intel_output->dev_priv; INT32 backlight_range[2]; int data, err, i; /* Set up the backlight property, which takes effect immediately * and accepts values only within the backlight_range. * * XXX: Currently, RandR doesn't verify that properties set are * within the backlight_range. */ backlight_atom = MakeAtom(BACKLIGHT_NAME, sizeof(BACKLIGHT_NAME) - 1, TRUE); backlight_range[0] = 0; backlight_range[1] = dev_priv->backlight_max; err = RRConfigureOutputProperty(output->randr_output, backlight_atom, FALSE, TRUE, FALSE, 2, backlight_range); if (err != 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "RRConfigureOutputProperty error, %d\n", err); } /* Set the current value of the backlight property */ data = dev_priv->backlight_duty_cycle; err = RRChangeOutputProperty(output->randr_output, backlight_atom, XA_INTEGER, 32, PropModeReplace, 1, &data, FALSE, TRUE); if (err != 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "RRChangeOutputProperty error, %d\n", err); } /* * Now setup the control selection property */ backlight_control_atom = MakeAtom(BACKLIGHT_CONTROL_NAME, sizeof(BACKLIGHT_CONTROL_NAME) - 1, TRUE); for (i = 0; i < NUM_BACKLIGHT_CONTROL_METHODS; i++) { backlight_control_name_atoms[i] = MakeAtom(backlight_control_names[i], strlen(backlight_control_names[i]), TRUE); } err = RRConfigureOutputProperty(output->randr_output, backlight_control_atom, TRUE, FALSE, FALSE, NUM_BACKLIGHT_CONTROL_METHODS, (INT32 *)backlight_control_name_atoms); if (err != 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "RRConfigureOutputProperty error, %d\n", err); } err = RRChangeOutputProperty(output->randr_output, backlight_control_atom, XA_ATOM, 32, PropModeReplace, 1, &backlight_control_name_atoms[pI830->backlight_control_method], FALSE, TRUE); if (err != 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "failed to set backlight control, %d\n", err); } #endif /* RANDR_12_INTERFACE */ } #ifdef RANDR_12_INTERFACE static Bool i830_lvds_set_property(xf86OutputPtr output, Atom property, RRPropertyValuePtr value) { ScrnInfoPtr pScrn = output->scrn; I830Ptr pI830 = I830PTR(pScrn); I830OutputPrivatePtr intel_output = output->driver_private; struct i830_lvds_priv *dev_priv = intel_output->dev_priv; if (property == backlight_atom) { INT32 val; if (value->type != XA_INTEGER || value->format != 32 || value->size != 1) { return FALSE; } val = *(INT32 *)value->data; if (val < 0 || val > dev_priv->backlight_max) return FALSE; if (val != dev_priv->backlight_duty_cycle) { dev_priv->set_backlight(output, val); dev_priv->backlight_duty_cycle = val; } return TRUE; } else if (property == backlight_control_atom) { INT32 backlight_range[2]; Atom atom; char *name; int ret, data; if (value->type != XA_ATOM || value->format != 32 || value->size != 1) return FALSE; memcpy(&atom, value->data, 4); name = NameForAtom(atom); ret = i830_backlight_control_lookup(name); if (ret < 0) return FALSE; pI830->backlight_control_method = ret; i830_lvds_set_backlight_control(output); /* * Update the backlight atom since the range and value may have changed */ backlight_range[0] = 0; backlight_range[1] = dev_priv->backlight_max; ret = RRConfigureOutputProperty(output->randr_output, backlight_atom, FALSE, TRUE, FALSE, 2, backlight_range); if (ret != 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "RRConfigureOutputProperty error, %d\n", ret); } /* Set the current value of the backlight property */ data = dev_priv->get_backlight(output); ret = RRChangeOutputProperty(output->randr_output, backlight_atom, XA_INTEGER, 32, PropModeReplace, 1, &data, FALSE, TRUE); if (ret != 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "RRChangeOutputProperty error, %d\n", ret); } return TRUE; } return TRUE; } #endif /* RANDR_12_INTERFACE */ #ifdef RANDR_13_INTERFACE static Bool i830_lvds_get_property(xf86OutputPtr output, Atom property) { I830OutputPrivatePtr intel_output = output->driver_private; struct i830_lvds_priv *dev_priv = intel_output->dev_priv; int ret; /* * Only need to update properties that might change out from under * us. The others will be cached by the randr core code. */ if (property == backlight_atom) { int val; val = dev_priv->get_backlight(output); dev_priv->backlight_duty_cycle = val; ret = RRChangeOutputProperty(output->randr_output, backlight_atom, XA_INTEGER, 32, PropModeReplace, 1, &val, FALSE, TRUE); if (ret != Success) return FALSE; } return TRUE; } #endif /* RANDR_13_INTERFACE */ static const xf86OutputFuncsRec i830_lvds_output_funcs = { .create_resources = i830_lvds_create_resources, .dpms = i830_lvds_dpms, .save = i830_lvds_save, .restore = i830_lvds_restore, .mode_valid = i830_lvds_mode_valid, .mode_fixup = i830_lvds_mode_fixup, .prepare = i830_output_prepare, .mode_set = i830_lvds_mode_set, .commit = i830_output_commit, .detect = i830_lvds_detect, .get_modes = i830_lvds_get_modes, #ifdef RANDR_12_INTERFACE .set_property = i830_lvds_set_property, #endif #ifdef RANDR_13_INTERFACE .get_property = i830_lvds_get_property, #endif .destroy = i830_lvds_destroy }; void i830_lvds_init(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); xf86OutputPtr output; I830OutputPrivatePtr intel_output; DisplayModePtr modes, scan, bios_mode; struct i830_lvds_priv *dev_priv; if (pI830->quirk_flag & QUIRK_IGNORE_LVDS) return; output = xf86OutputCreate (pScrn, &i830_lvds_output_funcs, "LVDS"); if (!output) return; intel_output = xnfcalloc (sizeof (I830OutputPrivateRec) + sizeof (struct i830_lvds_priv), 1); if (!intel_output) { xf86OutputDestroy (output); return; } intel_output->type = I830_OUTPUT_LVDS; intel_output->pipe_mask = (1 << 1); intel_output->clone_mask = (1 << I830_OUTPUT_LVDS); output->driver_private = intel_output; output->subpixel_order = SubPixelHorizontalRGB; output->interlaceAllowed = FALSE; output->doubleScanAllowed = FALSE; dev_priv = (struct i830_lvds_priv *) (intel_output + 1); intel_output->dev_priv = dev_priv; /* Set up the LVDS DDC channel. Most panels won't support it, but it can * be useful if available. */ I830I2CInit(pScrn, &intel_output->pDDCBus, GPIOC, "LVDSDDC_C"); /* Attempt to get the fixed panel mode from DDC. Assume that the preferred * mode is the right one. */ modes = i830_ddc_get_modes(output); for (scan = modes; scan != NULL; scan = scan->next) { if (scan->type & M_T_PREFERRED) break; } if (scan != NULL) { /* Pull our chosen mode out and make it the fixed mode */ if (modes == scan) modes = modes->next; if (scan->prev != NULL) scan->prev = scan->next; if (scan->next != NULL) scan->next = scan->prev; dev_priv->panel_fixed_mode = scan; } /* Delete the mode list */ while (modes != NULL) xf86DeleteMode(&modes, modes); /* If we didn't get EDID, try checking if the panel is already turned on. * If so, assume that whatever is currently programmed is the correct mode. */ if (dev_priv->panel_fixed_mode == NULL) { uint32_t lvds = INREG(LVDS); int pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); xf86CrtcPtr crtc = xf86_config->crtc[pipe]; if (lvds & LVDS_PORT_EN) { dev_priv->panel_fixed_mode = i830_crtc_mode_get(pScrn, crtc); if (dev_priv->panel_fixed_mode != NULL) dev_priv->panel_fixed_mode->type |= M_T_PREFERRED; } } /* Get the LVDS fixed mode out of the BIOS. We should support LVDS with * the BIOS being unavailable or broken, but lack the configuration options * for now. */ bios_mode = i830_bios_get_panel_mode(pScrn, &dev_priv->panel_wants_dither); if (bios_mode != NULL) { if (dev_priv->panel_fixed_mode != NULL) { /* Fixup for a 1280x768 panel with the horizontal trimmed * down to 1024 for text mode. */ if (!xf86ModesEqual(dev_priv->panel_fixed_mode, bios_mode) && dev_priv->panel_fixed_mode->HDisplay == 1024 && dev_priv->panel_fixed_mode->HSyncStart == 1200 && dev_priv->panel_fixed_mode->HSyncEnd == 1312 && dev_priv->panel_fixed_mode->HTotal == 1688 && dev_priv->panel_fixed_mode->VDisplay == 768) { dev_priv->panel_fixed_mode->HDisplay = 1280; dev_priv->panel_fixed_mode->HSyncStart = 1328; dev_priv->panel_fixed_mode->HSyncEnd = 1440; dev_priv->panel_fixed_mode->HTotal = 1688; } if (pI830->debug_modes && !xf86ModesEqual(dev_priv->panel_fixed_mode, bios_mode)) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "BIOS panel mode data doesn't match probed data, " "continuing with probed.\n"); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "BIOS mode:\n"); xf86PrintModeline(pScrn->scrnIndex, bios_mode); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "probed mode:\n"); xf86PrintModeline(pScrn->scrnIndex, dev_priv->panel_fixed_mode); xfree(bios_mode->name); xfree(bios_mode); } } else { dev_priv->panel_fixed_mode = bios_mode; } } else { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Couldn't detect panel mode. Disabling panel\n"); goto disable_exit; } /* Blacklist machines with BIOSes that list an LVDS panel without actually * having one. */ if (pI830->quirk_flag & QUIRK_IGNORE_MACMINI_LVDS) { /* It's a Mac Mini or Macbook Pro. * * Apple hardware is out to get us. The macbook pro has a real * LVDS panel, but the mac mini does not, and they have the same * device IDs. We'll distinguish by panel size, on the assumption * that Apple isn't about to make any machines with an 800x600 * display. */ if (dev_priv->panel_fixed_mode != NULL && dev_priv->panel_fixed_mode->HDisplay == 800 && dev_priv->panel_fixed_mode->VDisplay == 600) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Suspected Mac Mini, ignoring the LVDS\n"); goto disable_exit; } } i830_set_lvds_backlight_method(output); switch (pI830->backlight_control_method) { case BCM_NATIVE: dev_priv->set_backlight = i830_lvds_set_backlight_native; dev_priv->get_backlight = i830_lvds_get_backlight_native; dev_priv->backlight_max = i830_lvds_get_backlight_max_native(output); break; case BCM_LEGACY: dev_priv->set_backlight = i830_lvds_set_backlight_legacy; dev_priv->get_backlight = i830_lvds_get_backlight_legacy; dev_priv->backlight_max = 0xff; break; case BCM_COMBO: dev_priv->set_backlight = i830_lvds_set_backlight_combo; dev_priv->get_backlight = i830_lvds_get_backlight_combo; dev_priv->backlight_max = i830_lvds_get_backlight_max_combo(output); break; case BCM_KERNEL: dev_priv->set_backlight = i830_lvds_set_backlight_kernel; dev_priv->get_backlight = i830_lvds_get_backlight_kernel; dev_priv->backlight_max = i830_lvds_get_backlight_max_kernel(output); break; default: xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "bad backlight control method\n"); break; } dev_priv->backlight_duty_cycle = dev_priv->get_backlight(output); return; disable_exit: xf86DestroyI2CBusRec(intel_output->pDDCBus, TRUE, TRUE); xf86OutputDestroy(output); }