/*************************************************************************** Copyright 2000 Intel Corporation. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sub license, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL INTEL, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. **************************************************************************/ /* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i830_video.c,v 1.11tsi Exp $ */ /* * i830_video.c: i830/i845 Xv driver. * * Copyright © 2002 by Alan Hourihane and David Dawes * * Authors: * Alan Hourihane * David Dawes * * Derived from i810 Xv driver: * * Authors of i810 code: * Jonathan Bian * Offscreen Images: * Matt Sottek */ /* * XXX Could support more formats. */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include #include #include #include "xf86.h" #include "xf86_OSproc.h" #include "xf86Resources.h" #include "compiler.h" #include "xf86PciInfo.h" #include "xf86Pci.h" #include "xf86fbman.h" #include "regionstr.h" #include "randrstr.h" #include "windowstr.h" #include "damage.h" #include "i830.h" #include "i830_video.h" #include "xf86xv.h" #include #include "xaa.h" #include "xaalocal.h" #include "dixstruct.h" #include "fourcc.h" #ifdef INTEL_XVMC #define _INTEL_XVMC_SERVER_ #include "i830_hwmc.h" #include "i915_hwmc.h" #endif #define OFF_DELAY 250 /* milliseconds */ #define FREE_DELAY 15000 #define OFF_TIMER 0x01 #define FREE_TIMER 0x02 #define CLIENT_VIDEO_ON 0x04 #define TIMER_MASK (OFF_TIMER | FREE_TIMER) static void I830InitOffscreenImages(ScreenPtr); static XF86VideoAdaptorPtr I830SetupImageVideoOverlay(ScreenPtr); static XF86VideoAdaptorPtr I830SetupImageVideoTextured(ScreenPtr); static void I830StopVideo(ScrnInfoPtr, pointer, Bool); static int I830SetPortAttribute(ScrnInfoPtr, Atom, INT32, pointer); static int I830SetPortAttributeTextured(ScrnInfoPtr, Atom, INT32, pointer); static int I830GetPortAttribute(ScrnInfoPtr, Atom, INT32 *, pointer); static void I830QueryBestSize(ScrnInfoPtr, Bool, short, short, short, short, unsigned int *, unsigned int *, pointer); static int I830PutImage(ScrnInfoPtr, short, short, short, short, short, short, short, short, int, unsigned char *, short, short, Bool, RegionPtr, pointer, DrawablePtr); static int I830QueryImageAttributesOverlay(ScrnInfoPtr, int, unsigned short *, unsigned short *, int *, int *); static int I830QueryImageAttributesTextured(ScrnInfoPtr, int, unsigned short *, unsigned short *, int *, int *); #define MAKE_ATOM(a) MakeAtom(a, sizeof(a) - 1, TRUE) static Atom xvBrightness, xvContrast, xvSaturation, xvColorKey, xvPipe, xvDoubleBuffer; static Atom xvGamma0, xvGamma1, xvGamma2, xvGamma3, xvGamma4, xvGamma5; static Atom xvSyncToVblank; /* Limits for the overlay/textured video source sizes. The documented hardware * limits are 2048x2048 or better for overlay and both of our textured video * implementations. However, we run into the bigrequests limit of (currently) * 4MB, which even the planar format's 2048*2048*1.5 bytes is larger than. * Conveniently, the HD resolution, even in packed format, takes * (1920*1088*2) bytes, which is just shy of 4MB. Additionally, on the 830 * and 845, larger sizes resulted in the card hanging, so we keep the limits * lower there. * * While the HD resolution is actually 1920x1080, we increase our advertised * size to 1088 because some software wants to send an image aligned to * 16-pixel boundaries. */ #define IMAGE_MAX_WIDTH 1920 #define IMAGE_MAX_HEIGHT 1088 #define IMAGE_MAX_WIDTH_LEGACY 1024 #define IMAGE_MAX_HEIGHT_LEGACY 1088 /* overlay debugging printf function */ #if 0 #define OVERLAY_DEBUG ErrorF #else #define OVERLAY_DEBUG if (0) ErrorF #endif /* Oops, I never exported this function in EXA. I meant to. */ #ifndef exaMoveInPixmap void exaMoveInPixmap (PixmapPtr pPixmap); #endif /* * OCMD - Overlay Command Register */ #define OCMD_REGISTER 0x30168 #define MIRROR_MODE (0x3<<17) #define MIRROR_HORIZONTAL (0x1<<17) #define MIRROR_VERTICAL (0x2<<17) #define MIRROR_BOTH (0x3<<17) #define OV_BYTE_ORDER (0x3<<14) #define UV_SWAP (0x1<<14) #define Y_SWAP (0x2<<14) #define Y_AND_UV_SWAP (0x3<<14) #define SOURCE_FORMAT (0xf<<10) #define RGB_888 (0x1<<10) #define RGB_555 (0x2<<10) #define RGB_565 (0x3<<10) #define YUV_422 (0x8<<10) #define YUV_411 (0x9<<10) #define YUV_420 (0xc<<10) #define YUV_422_PLANAR (0xd<<10) #define YUV_410 (0xe<<10) #define TVSYNC_FLIP_PARITY (0x1<<9) #define TVSYNC_FLIP_ENABLE (0x1<<7) #define BUF_TYPE (0x1<<5) #define BUF_TYPE_FRAME (0x0<<5) #define BUF_TYPE_FIELD (0x1<<5) #define TEST_MODE (0x1<<4) #define BUFFER_SELECT (0x3<<2) #define BUFFER0 (0x0<<2) #define BUFFER1 (0x1<<2) #define FIELD_SELECT (0x1<<1) #define FIELD0 (0x0<<1) #define FIELD1 (0x1<<1) #define OVERLAY_ENABLE 0x1 #define OFC_UPDATE 0x1 /* OCONFIG register */ #define CC_OUT_8BIT (0x1<<3) #define OVERLAY_PIPE_MASK (0x1<<18) #define OVERLAY_PIPE_A (0x0<<18) #define OVERLAY_PIPE_B (0x1<<18) #define GAMMA2_ENBL (0x1<<16) #define CSC_MODE_BT709 (0x1<<5) #define CSC_MODE_BT601 (0x0<<5) #define THREE_LINE_BUFFERS (0x1<<0) #define TWO_LINE_BUFFERS (0x0<<0) /* DCLRKM register */ #define DEST_KEY_ENABLE (0x1<<31) /* Polyphase filter coefficients */ #define N_HORIZ_Y_TAPS 5 #define N_VERT_Y_TAPS 3 #define N_HORIZ_UV_TAPS 3 #define N_VERT_UV_TAPS 3 #define N_PHASES 17 #define MAX_TAPS 5 /* Filter cutoff frequency limits. */ #define MIN_CUTOFF_FREQ 1.0 #define MAX_CUTOFF_FREQ 3.0 #define RGB16ToColorKey(c) \ (((c & 0xF800) << 8) | ((c & 0x07E0) << 5) | ((c & 0x001F) << 3)) #define RGB15ToColorKey(c) \ (((c & 0x7c00) << 9) | ((c & 0x03E0) << 6) | ((c & 0x001F) << 3)) /* client libraries expect an encoding */ static XF86VideoEncodingRec DummyEncoding[1] = { { 0, "XV_IMAGE", IMAGE_MAX_WIDTH, IMAGE_MAX_HEIGHT, {1, 1} } }; #define NUM_FORMATS 3 static XF86VideoFormatRec Formats[NUM_FORMATS] = { {15, TrueColor}, {16, TrueColor}, {24, TrueColor} }; #define CLONE_ATTRIBUTES 1 static XF86AttributeRec CloneAttributes[CLONE_ATTRIBUTES] = { {XvSettable | XvGettable, -1, 1, "XV_PIPE"} }; #define NUM_ATTRIBUTES 5 static XF86AttributeRec Attributes[NUM_ATTRIBUTES] = { {XvSettable | XvGettable, 0, (1 << 24) - 1, "XV_COLORKEY"}, {XvSettable | XvGettable, -128, 127, "XV_BRIGHTNESS"}, {XvSettable | XvGettable, 0, 255, "XV_CONTRAST"}, {XvSettable | XvGettable, 0, 1023, "XV_SATURATION"}, {XvSettable | XvGettable, 0, 1, "XV_DOUBLE_BUFFER"} }; #define NUM_TEXTURED_ATTRIBUTES 3 static XF86AttributeRec TexturedAttributes[NUM_TEXTURED_ATTRIBUTES] = { {XvSettable | XvGettable, -128, 127, "XV_BRIGHTNESS"}, {XvSettable | XvGettable, 0, 255, "XV_CONTRAST"}, {XvSettable | XvGettable, -1, 1, "XV_SYNC_TO_VBLANK"}, }; #define GAMMA_ATTRIBUTES 6 static XF86AttributeRec GammaAttributes[GAMMA_ATTRIBUTES] = { {XvSettable | XvGettable, 0, 0xffffff, "XV_GAMMA0"}, {XvSettable | XvGettable, 0, 0xffffff, "XV_GAMMA1"}, {XvSettable | XvGettable, 0, 0xffffff, "XV_GAMMA2"}, {XvSettable | XvGettable, 0, 0xffffff, "XV_GAMMA3"}, {XvSettable | XvGettable, 0, 0xffffff, "XV_GAMMA4"}, {XvSettable | XvGettable, 0, 0xffffff, "XV_GAMMA5"} }; #define NUM_IMAGES 5 static XF86ImageRec Images[NUM_IMAGES] = { XVIMAGE_YUY2, XVIMAGE_YV12, XVIMAGE_I420, XVIMAGE_UYVY, #ifdef INTEL_XVMC { /* * Below, a dummy picture type that is used in XvPutImage only to do * an overlay update. Introduced for the XvMC client lib. * Defined to have a zero data size. */ FOURCC_XVMC, XvYUV, LSBFirst, {'X', 'V', 'M', 'C', 0x00, 0x00, 0x00, 0x10, 0x80, 0x00, 0x00, 0xAA, 0x00, 0x38, 0x9B, 0x71}, 12, XvPlanar, 3, 0, 0, 0, 0, 8, 8, 8, 1, 2, 2, 1, 2, 2, {'Y', 'V', 'U', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, XvTopToBottom }, #endif }; typedef struct { uint32_t OBUF_0Y; uint32_t OBUF_1Y; uint32_t OBUF_0U; uint32_t OBUF_0V; uint32_t OBUF_1U; uint32_t OBUF_1V; uint32_t OSTRIDE; uint32_t YRGB_VPH; uint32_t UV_VPH; uint32_t HORZ_PH; uint32_t INIT_PHS; uint32_t DWINPOS; uint32_t DWINSZ; uint32_t SWIDTH; uint32_t SWIDTHSW; uint32_t SHEIGHT; uint32_t YRGBSCALE; uint32_t UVSCALE; uint32_t OCLRC0; uint32_t OCLRC1; uint32_t DCLRKV; uint32_t DCLRKM; uint32_t SCLRKVH; uint32_t SCLRKVL; uint32_t SCLRKEN; uint32_t OCONFIG; uint32_t OCMD; uint32_t RESERVED1; /* 0x6C */ uint32_t OSTART_0Y; /* for i965 */ uint32_t OSTART_1Y; /* for i965 */ uint32_t OSTART_0U; uint32_t OSTART_0V; uint32_t OSTART_1U; uint32_t OSTART_1V; uint32_t OTILEOFF_0Y; uint32_t OTILEOFF_1Y; uint32_t OTILEOFF_0U; uint32_t OTILEOFF_0V; uint32_t OTILEOFF_1U; uint32_t OTILEOFF_1V; uint32_t FASTHSCALE; /* 0xA0 */ uint32_t UVSCALEV; /* 0xA4 */ uint32_t RESERVEDC[(0x200 - 0xA8) / 4]; /* 0xA8 - 0x1FC */ uint16_t Y_VCOEFS[N_VERT_Y_TAPS * N_PHASES]; /* 0x200 */ uint16_t RESERVEDD[0x100 / 2 - N_VERT_Y_TAPS * N_PHASES]; uint16_t Y_HCOEFS[N_HORIZ_Y_TAPS * N_PHASES]; /* 0x300 */ uint16_t RESERVEDE[0x200 / 2 - N_HORIZ_Y_TAPS * N_PHASES]; uint16_t UV_VCOEFS[N_VERT_UV_TAPS * N_PHASES]; /* 0x500 */ uint16_t RESERVEDF[0x100 / 2 - N_VERT_UV_TAPS * N_PHASES]; uint16_t UV_HCOEFS[N_HORIZ_UV_TAPS * N_PHASES]; /* 0x600 */ uint16_t RESERVEDG[0x100 / 2 - N_HORIZ_UV_TAPS * N_PHASES]; } I830OverlayRegRec, *I830OverlayRegPtr; #define I830OVERLAYREG(pI830) ((I830OverlayRegPtr)\ ((pI830)->FbBase + \ (pI830)->overlay_regs->offset)) #if VIDEO_DEBUG static void CompareOverlay(I830Ptr pI830, uint32_t * overlay, int size) { int i; uint32_t val; int bad = 0; for (i = 0; i < size; i += 4) { val = INREG(0x30100 + i); if (val != overlay[i / 4]) { OVERLAY_DEBUG("0x%05x value doesn't match (0x%lx != 0x%lx)\n", 0x30100 + i, val, overlay[i / 4]); bad++; } } if (!bad) OVERLAY_DEBUG("CompareOverlay: no differences\n"); } #endif static void I830SetOneLineModeRatio(ScrnInfoPtr pScrn); static void i830_overlay_switch_to_crtc (ScrnInfoPtr pScrn, xf86CrtcPtr crtc) { I830Ptr pI830 = I830PTR(pScrn); I830PortPrivPtr pPriv = GET_PORT_PRIVATE(pScrn); I830CrtcPrivatePtr intel_crtc = crtc->driver_private; int pipeconf_reg = intel_crtc->pipe == 0 ? PIPEACONF : PIPEBCONF; /* overlay can't be used on pipe with double wide, and pipe must be enabled. */ if ((!IS_I965G(pI830) && (INREG(pipeconf_reg) & PIPEACONF_DOUBLE_WIDE)) || (intel_crtc->dpms_mode == DPMSModeOff)) pPriv->overlayOK = FALSE; else pPriv->overlayOK = TRUE; if (!pPriv->overlayOK) return; /* Check we have an LFP connected */ if (i830PipeHasType(crtc, I830_OUTPUT_LVDS)) { int vtotal_reg = intel_crtc->pipe == 0 ? VTOTAL_A : VTOTAL_B; uint32_t size = intel_crtc->pipe ? INREG(PIPEBSRC) : INREG(PIPEASRC); uint32_t active; uint32_t hsize, vsize; hsize = (size >> 16) & 0x7FF; vsize = size & 0x7FF; active = INREG(vtotal_reg) & 0x7FF; if (vsize < active && hsize > 1024) I830SetOneLineModeRatio(pScrn); if (pPriv->scaleRatio & 0xFFFE0000) { /* Possible bogus ratio, using in-accurate fallback */ xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Bogus panel fit register, Xvideo positioning may not " "be accurate.\n"); xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Using fallback ratio - was 0x%x, now 0x%x\n", pPriv->scaleRatio, (int)(((float)active * 65536)/(float)vsize)); pPriv->scaleRatio = (int)(((float)active * 65536) / (float)vsize); } } } /* * This is more or less the correct way to initalise, update, and shut down * the overlay. * * XXX Need to make sure that the overlay engine is cleanly shutdown in * all modes of server exit. */ static void i830_overlay_on(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); I830OverlayRegPtr overlay = I830OVERLAYREG(pI830); I830PortPrivPtr pPriv = pI830->adaptor->pPortPrivates[0].ptr; Bool deactivate = FALSE; if (pI830->overlayOn) return; /* * On I830, if pipe A is off when the overlayis enabled, it will fail to * turn on and blank the entire screen or lock up the ring. Light up pipe * A in this case to provide a clock for the overlay hardware */ if (pPriv->current_crtc && i830_crtc_pipe (pPriv->current_crtc) != 0) deactivate = i830_pipe_a_require_activate (pScrn); overlay->OCMD &= ~OVERLAY_ENABLE; BEGIN_BATCH(6); OUT_BATCH(MI_FLUSH | MI_WRITE_DIRTY_STATE); OUT_BATCH(MI_NOOP); OUT_BATCH(MI_OVERLAY_FLIP | MI_OVERLAY_FLIP_ON); if (OVERLAY_NOPHYSICAL(pI830)) OUT_BATCH(pI830->overlay_regs->offset | OFC_UPDATE); else OUT_BATCH(pI830->overlay_regs->bus_addr | OFC_UPDATE); /* Wait for the overlay to light up before attempting to use it */ OUT_BATCH(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); OUT_BATCH(MI_NOOP); ADVANCE_BATCH(); i830WaitSync(pScrn); /* * If we turned pipe A on up above, turn it * back off */ if (deactivate) i830_pipe_a_require_deactivate (pScrn); OVERLAY_DEBUG("overlay_on\n"); pI830->overlayOn = TRUE; overlay->OCMD |= OVERLAY_ENABLE; } static void i830_overlay_continue(ScrnInfoPtr pScrn, Bool update_filter) { I830Ptr pI830 = I830PTR(pScrn); uint32_t flip_addr; I830OverlayRegPtr overlay = I830OVERLAYREG(pI830); if (!pI830->overlayOn) return; if (OVERLAY_NOPHYSICAL(pI830)) flip_addr = pI830->overlay_regs->offset; else flip_addr = pI830->overlay_regs->bus_addr; if (update_filter) flip_addr |= OFC_UPDATE; OVERLAY_DEBUG ("overlay_continue cmd 0x%08x -> 0x%08x sta 0x%08x\n", overlay->OCMD, INREG(OCMD_REGISTER), INREG(DOVSTA)); BEGIN_BATCH(4); OUT_BATCH(MI_FLUSH | MI_WRITE_DIRTY_STATE); OUT_BATCH(MI_NOOP); OUT_BATCH(MI_OVERLAY_FLIP | MI_OVERLAY_FLIP_CONTINUE); OUT_BATCH(flip_addr); ADVANCE_BATCH(); OVERLAY_DEBUG("overlay_continue\n"); } static void i830_overlay_off(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); I830OverlayRegPtr overlay = I830OVERLAYREG(pI830); if (!pI830->overlayOn) return; /* * Wait for overlay to go idle. This has to be * separated from the turning off state by a WaitSync * to ensure the overlay will not read OCMD early and * disable the overlay before the commands here are * executed */ { BEGIN_BATCH(2); OUT_BATCH(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); OUT_BATCH(MI_NOOP); ADVANCE_BATCH(); i830WaitSync(pScrn); } /* * Turn overlay off */ { overlay->OCMD &= ~OVERLAY_ENABLE; OVERLAY_DEBUG ("overlay_off cmd 0x%08x -> 0x%08x sta 0x%08x\n", overlay->OCMD, INREG(OCMD_REGISTER), INREG(DOVSTA)); BEGIN_BATCH(6); OUT_BATCH(MI_FLUSH | MI_WRITE_DIRTY_STATE); OUT_BATCH(MI_NOOP); OUT_BATCH(MI_OVERLAY_FLIP | MI_OVERLAY_FLIP_CONTINUE); if (OVERLAY_NOPHYSICAL(pI830)) OUT_BATCH(pI830->overlay_regs->offset); else OUT_BATCH(pI830->overlay_regs->bus_addr); OUT_BATCH(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); OUT_BATCH(MI_NOOP); ADVANCE_BATCH(); i830WaitSync(pScrn); } pI830->overlayOn = FALSE; OVERLAY_DEBUG("overlay_off\n"); } void I830InitVideo(ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; I830Ptr pI830 = I830PTR(pScrn); XF86VideoAdaptorPtr *adaptors, *newAdaptors = NULL; XF86VideoAdaptorPtr overlayAdaptor = NULL, texturedAdaptor = NULL; int num_adaptors; #ifdef INTEL_XVMC Bool xvmc_status = FALSE; #endif #if 0 { I830OverlayRegRec tmp; ErrorF("sizeof I830OverlayRegRec is 0x%x\n", sizeof(I830OverlayRegRec)); ErrorF("Reserved C, D, E, F, G are %x, %x, %x, %x, %x\n", (unsigned long)&(tmp.RESERVEDC[0]) - (unsigned long)&tmp, (unsigned long)&(tmp.RESERVEDD[0]) - (unsigned long)&tmp, (unsigned long)&(tmp.RESERVEDE[0]) - (unsigned long)&tmp, (unsigned long)&(tmp.RESERVEDF[0]) - (unsigned long)&tmp, (unsigned long)&(tmp.RESERVEDG[0]) - (unsigned long)&tmp); } #endif num_adaptors = xf86XVListGenericAdaptors(pScrn, &adaptors); /* Give our adaptor list enough space for the overlay and/or texture video * adaptors. */ newAdaptors = xalloc((num_adaptors + 2) * sizeof(XF86VideoAdaptorPtr *)); if (newAdaptors == NULL) return; memcpy(newAdaptors, adaptors, num_adaptors * sizeof(XF86VideoAdaptorPtr)); adaptors = newAdaptors; /* Add the adaptors supported by our hardware. First, set up the atoms * that will be used by both output adaptors. */ xvBrightness = MAKE_ATOM("XV_BRIGHTNESS"); xvContrast = MAKE_ATOM("XV_CONTRAST"); /* Set up textured video if we can do it at this depth and we are on * supported hardware. */ if (pScrn->bitsPerPixel >= 16 && (IS_I9XX(pI830) || IS_I965G(pI830)) && !(!IS_I965G(pI830) && pScrn->displayWidth > 2048)) { texturedAdaptor = I830SetupImageVideoTextured(pScreen); if (texturedAdaptor != NULL) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Set up textured video\n"); } else { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Failed to set up textured video\n"); } } /* Set up overlay video if we can do it at this depth. */ if (!OVERLAY_NOEXIST(pI830) && pScrn->bitsPerPixel != 8 && !pI830->use_drm_mode && pI830->overlay_regs != NULL) { overlayAdaptor = I830SetupImageVideoOverlay(pScreen); if (overlayAdaptor != NULL) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Set up overlay video\n"); } else { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Failed to set up overlay video\n"); } I830InitOffscreenImages(pScreen); } if (overlayAdaptor && pI830->XvPreferOverlay) adaptors[num_adaptors++] = overlayAdaptor; if (texturedAdaptor) adaptors[num_adaptors++] = texturedAdaptor; if (overlayAdaptor && !pI830->XvPreferOverlay) adaptors[num_adaptors++] = overlayAdaptor; #ifdef INTEL_XVMC if (intel_xvmc_probe(pScrn)) { if (texturedAdaptor) xvmc_status = intel_xvmc_driver_init(pScreen, texturedAdaptor); } #endif if (num_adaptors) { xf86XVScreenInit(pScreen, adaptors, num_adaptors); } else { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Disabling Xv because no adaptors could be initialized.\n"); pI830->XvEnabled = FALSE; } #ifdef INTEL_XVMC if (xvmc_status) intel_xvmc_screen_init(pScreen); #endif xfree(adaptors); } static void I830ResetVideo(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); I830PortPrivPtr pPriv = pI830->adaptor->pPortPrivates[0].ptr; I830OverlayRegPtr overlay = I830OVERLAYREG(pI830); OVERLAY_DEBUG("I830ResetVideo: base: %p, offset: 0x%lx, obase: %p\n", pI830->FbBase, pI830->overlay_regs->offset, overlay); /* * Default to maximum image size in YV12 */ memset(overlay, 0, sizeof(*overlay)); overlay->YRGB_VPH = 0; overlay->UV_VPH = 0; overlay->HORZ_PH = 0; overlay->INIT_PHS = 0; overlay->DWINPOS = 0; overlay->DWINSZ = 0; overlay->SWIDTH = 0; overlay->SWIDTHSW = 0; overlay->SHEIGHT = 0; overlay->OCLRC0 = (pPriv->contrast << 18) | (pPriv->brightness & 0xff); overlay->OCLRC1 = pPriv->saturation; #if 0 overlay->AWINPOS = 0; overlay->AWINSZ = 0; #endif overlay->FASTHSCALE = 0; /* * Enable destination color keying */ switch (pScrn->depth) { case 8: overlay->DCLRKV = 0; overlay->DCLRKM = 0xffffff | DEST_KEY_ENABLE; break; case 15: overlay->DCLRKV = RGB15ToColorKey(pPriv->colorKey); overlay->DCLRKM = 0x070707 | DEST_KEY_ENABLE; break; case 16: overlay->DCLRKV = RGB16ToColorKey(pPriv->colorKey); overlay->DCLRKM = 0x070307 | DEST_KEY_ENABLE; break; default: overlay->DCLRKV = pPriv->colorKey; overlay->DCLRKM = DEST_KEY_ENABLE; break; } overlay->SCLRKVH = 0; overlay->SCLRKVL = 0; overlay->SCLRKEN = 0; /* source color key disable */ overlay->OCONFIG = CC_OUT_8BIT; if (IS_I965GM(pI830)) overlay->OCONFIG |= CSC_MODE_BT709; /* * Select which pipe the overlay is enabled on. */ overlay->OCONFIG &= ~OVERLAY_PIPE_MASK; if (i830_crtc_pipe (pPriv->current_crtc) == 0) overlay->OCONFIG |= OVERLAY_PIPE_A; else overlay->OCONFIG |= OVERLAY_PIPE_B; #if 0 /* * XXX DUMP REGISTER CODE !!! * This allows us to dump the complete i845 registers and compare * with warm boot situations before we upload our first copy. */ { int i; for (i = 0x30000; i < 0x31000; i += 4) ErrorF("0x%x 0x%" PRIx32 "\n", i, INREG(i)); } #endif } #define PFIT_CONTROLS 0x61230 #define PFIT_AUTOVSCALE_MASK 0x200 #define PFIT_ON_MASK 0x80000000 #define PFIT_AUTOSCALE_RATIO 0x61238 #define PFIT_PROGRAMMED_SCALE_RATIO 0x61234 static void I830SetOneLineModeRatio(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); I830PortPrivPtr pPriv = pI830->adaptor->pPortPrivates[0].ptr; uint32_t panelFitControl = INREG(PFIT_CONTROLS); int vertScale; pPriv->scaleRatio = 0x10000; if (panelFitControl & PFIT_ON_MASK) { if (panelFitControl & PFIT_AUTOVSCALE_MASK) { vertScale = INREG(PFIT_AUTOSCALE_RATIO) >> 16; } else { vertScale = INREG(PFIT_PROGRAMMED_SCALE_RATIO) >> 16; } if (vertScale != 0) pPriv->scaleRatio = ((double) 0x10000 / (double)vertScale) * 0x10000; pPriv->oneLineMode = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Enabling Xvideo one-line mode\n"); } if (pPriv->scaleRatio == 0x10000) pPriv->oneLineMode = FALSE; } static uint32_t I830BoundGammaElt (uint32_t elt, uint32_t eltPrev) { elt &= 0xff; eltPrev &= 0xff; if (elt < eltPrev) elt = eltPrev; else if ((elt - eltPrev) > 0x7e) elt = eltPrev + 0x7e; return elt; } static uint32_t I830BoundGamma (uint32_t gamma, uint32_t gammaPrev) { return (I830BoundGammaElt (gamma >> 24, gammaPrev >> 24) << 24 | I830BoundGammaElt (gamma >> 16, gammaPrev >> 16) << 16 | I830BoundGammaElt (gamma >> 8, gammaPrev >> 8) << 8 | I830BoundGammaElt (gamma , gammaPrev )); } static void I830UpdateGamma(ScrnInfoPtr pScrn) { I830Ptr pI830 = I830PTR(pScrn); I830PortPrivPtr pPriv = pI830->adaptor->pPortPrivates[0].ptr; uint32_t gamma0 = pPriv->gamma0; uint32_t gamma1 = pPriv->gamma1; uint32_t gamma2 = pPriv->gamma2; uint32_t gamma3 = pPriv->gamma3; uint32_t gamma4 = pPriv->gamma4; uint32_t gamma5 = pPriv->gamma5; #if 0 ErrorF ("Original gamma: 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n", gamma0, gamma1, gamma2, gamma3, gamma4, gamma5); #endif gamma1 = I830BoundGamma (gamma1, gamma0); gamma2 = I830BoundGamma (gamma2, gamma1); gamma3 = I830BoundGamma (gamma3, gamma2); gamma4 = I830BoundGamma (gamma4, gamma3); gamma5 = I830BoundGamma (gamma5, gamma4); #if 0 ErrorF ("Bounded gamma: 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n", gamma0, gamma1, gamma2, gamma3, gamma4, gamma5); #endif OUTREG(OGAMC5, gamma5); OUTREG(OGAMC4, gamma4); OUTREG(OGAMC3, gamma3); OUTREG(OGAMC2, gamma2); OUTREG(OGAMC1, gamma1); OUTREG(OGAMC0, gamma0); } static XF86VideoAdaptorPtr I830SetupImageVideoOverlay(ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; I830Ptr pI830 = I830PTR(pScrn); XF86VideoAdaptorPtr adapt; I830PortPrivPtr pPriv; XF86AttributePtr att; OVERLAY_DEBUG("I830SetupImageVideoOverlay\n"); if (!(adapt = xcalloc(1, sizeof(XF86VideoAdaptorRec) + sizeof(I830PortPrivRec) + sizeof(DevUnion)))) return NULL; adapt->type = XvWindowMask | XvInputMask | XvImageMask; adapt->flags = VIDEO_OVERLAID_IMAGES /*| VIDEO_CLIP_TO_VIEWPORT*/; adapt->name = "Intel(R) Video Overlay"; adapt->nEncodings = 1; adapt->pEncodings = DummyEncoding; /* update the DummyEncoding for these two chipsets */ if (IS_845G(pI830) || IS_I830(pI830)) { adapt->pEncodings->width = IMAGE_MAX_WIDTH_LEGACY; adapt->pEncodings->height = IMAGE_MAX_HEIGHT_LEGACY; } adapt->nFormats = NUM_FORMATS; adapt->pFormats = Formats; adapt->nPorts = 1; adapt->pPortPrivates = (DevUnion *) (&adapt[1]); pPriv = (I830PortPrivPtr) (&adapt->pPortPrivates[1]); adapt->pPortPrivates[0].ptr = (pointer) (pPriv); adapt->nAttributes = NUM_ATTRIBUTES; adapt->nAttributes += CLONE_ATTRIBUTES; if (IS_I9XX(pI830)) adapt->nAttributes += GAMMA_ATTRIBUTES; /* has gamma */ adapt->pAttributes = xnfalloc(sizeof(XF86AttributeRec) * adapt->nAttributes); /* Now copy the attributes */ att = adapt->pAttributes; memcpy((char *)att, (char*)Attributes, sizeof(XF86AttributeRec)* NUM_ATTRIBUTES); att+=NUM_ATTRIBUTES; memcpy((char*)att, (char*)CloneAttributes, sizeof(XF86AttributeRec) * CLONE_ATTRIBUTES); att+=CLONE_ATTRIBUTES; if (IS_I9XX(pI830)) { memcpy((char*)att, (char*)GammaAttributes, sizeof(XF86AttributeRec) * GAMMA_ATTRIBUTES); att+=GAMMA_ATTRIBUTES; } adapt->nImages = NUM_IMAGES; adapt->pImages = Images; adapt->PutVideo = NULL; adapt->PutStill = NULL; adapt->GetVideo = NULL; adapt->GetStill = NULL; adapt->StopVideo = I830StopVideo; adapt->SetPortAttribute = I830SetPortAttribute; adapt->GetPortAttribute = I830GetPortAttribute; adapt->QueryBestSize = I830QueryBestSize; adapt->PutImage = I830PutImage; adapt->QueryImageAttributes = I830QueryImageAttributesOverlay; pPriv->textured = FALSE; pPriv->colorKey = pI830->colorKey & ((1 << pScrn->depth) - 1); pPriv->videoStatus = 0; pPriv->brightness = -19; /* (255/219) * -16 */ pPriv->contrast = 75; /* 255/219 * 64 */ pPriv->saturation = 146; /* 128/112 * 128 */ pPriv->current_crtc = NULL; pPriv->desired_crtc = NULL; pPriv->buf = NULL; pPriv->currentBuf = 0; pPriv->gamma5 = 0xc0c0c0; pPriv->gamma4 = 0x808080; pPriv->gamma3 = 0x404040; pPriv->gamma2 = 0x202020; pPriv->gamma1 = 0x101010; pPriv->gamma0 = 0x080808; pPriv->doubleBuffer = 1; pPriv->rotation = RR_Rotate_0; /* gotta uninit this someplace */ REGION_NULL(pScreen, &pPriv->clip); pI830->adaptor = adapt; /* With LFP's we need to detect whether we're in One Line Mode, which * essentially means a resolution greater than 1024x768, and fix up * the scaler accordingly. */ pPriv->scaleRatio = 0x10000; pPriv->oneLineMode = FALSE; /* * Initialise pPriv->overlayOK. Set it to TRUE here so that a warning will * be generated if i830_crtc_dpms_video() sets it to FALSE during mode * setup. */ pPriv->overlayOK = TRUE; xvColorKey = MAKE_ATOM("XV_COLORKEY"); xvBrightness = MAKE_ATOM("XV_BRIGHTNESS"); xvContrast = MAKE_ATOM("XV_CONTRAST"); xvSaturation = MAKE_ATOM("XV_SATURATION"); xvDoubleBuffer = MAKE_ATOM("XV_DOUBLE_BUFFER"); /* Allow the pipe to be switched from pipe A to B when in clone mode */ xvPipe = MAKE_ATOM("XV_PIPE"); if (IS_I9XX(pI830)) { xvGamma0 = MAKE_ATOM("XV_GAMMA0"); xvGamma1 = MAKE_ATOM("XV_GAMMA1"); xvGamma2 = MAKE_ATOM("XV_GAMMA2"); xvGamma3 = MAKE_ATOM("XV_GAMMA3"); xvGamma4 = MAKE_ATOM("XV_GAMMA4"); xvGamma5 = MAKE_ATOM("XV_GAMMA5"); } I830ResetVideo(pScrn); I830UpdateGamma(pScrn); return adapt; } static XF86VideoAdaptorPtr I830SetupImageVideoTextured(ScreenPtr pScreen) { XF86VideoAdaptorPtr adapt; XF86AttributePtr attrs; I830PortPrivPtr portPrivs; DevUnion *devUnions; int nports = 16, i; int nAttributes; OVERLAY_DEBUG("I830SetupImageVideoOverlay\n"); nAttributes = NUM_TEXTURED_ATTRIBUTES; adapt = xcalloc(1, sizeof(XF86VideoAdaptorRec)); portPrivs = xcalloc(nports, sizeof(I830PortPrivRec)); devUnions = xcalloc(nports, sizeof(DevUnion)); attrs = xcalloc(nAttributes, sizeof(XF86AttributeRec)); if (adapt == NULL || portPrivs == NULL || devUnions == NULL || attrs == NULL) { xfree(adapt); xfree(portPrivs); xfree(devUnions); xfree(attrs); return NULL; } adapt->type = XvWindowMask | XvInputMask | XvImageMask; adapt->flags = 0; adapt->name = "Intel(R) Textured Video"; adapt->nEncodings = 1; adapt->pEncodings = DummyEncoding; adapt->nFormats = NUM_FORMATS; adapt->pFormats = Formats; adapt->nPorts = nports; adapt->pPortPrivates = devUnions; adapt->nAttributes = nAttributes; adapt->pAttributes = attrs; memcpy(attrs, TexturedAttributes, nAttributes * sizeof(XF86AttributeRec)); adapt->nImages = NUM_IMAGES; adapt->pImages = Images; adapt->PutVideo = NULL; adapt->PutStill = NULL; adapt->GetVideo = NULL; adapt->GetStill = NULL; adapt->StopVideo = I830StopVideo; adapt->SetPortAttribute = I830SetPortAttributeTextured; adapt->GetPortAttribute = I830GetPortAttribute; adapt->QueryBestSize = I830QueryBestSize; adapt->PutImage = I830PutImage; adapt->QueryImageAttributes = I830QueryImageAttributesTextured; for (i = 0; i < nports; i++) { I830PortPrivPtr pPriv = &portPrivs[i]; pPriv->textured = TRUE; pPriv->videoStatus = 0; pPriv->buf = NULL; pPriv->currentBuf = 0; pPriv->doubleBuffer = 0; pPriv->rotation = RR_Rotate_0; pPriv->SyncToVblank = 1; /* gotta uninit this someplace, XXX: shouldn't be necessary for textured */ REGION_NULL(pScreen, &pPriv->clip); adapt->pPortPrivates[i].ptr = (pointer) (pPriv); } xvSyncToVblank = MAKE_ATOM("XV_SYNC_TO_VBLANK"); return adapt; } static void I830StopVideo(ScrnInfoPtr pScrn, pointer data, Bool shutdown) { I830PortPrivPtr pPriv = (I830PortPrivPtr) data; if (pPriv->textured) return; OVERLAY_DEBUG("I830StopVideo\n"); REGION_EMPTY(pScrn->pScreen, &pPriv->clip); if (shutdown) { if (pPriv->videoStatus & CLIENT_VIDEO_ON) { i830_overlay_off(pScrn); } if (pPriv->buf) { if (!pPriv->textured) drm_intel_bo_unpin(pPriv->buf); drm_intel_bo_unreference(pPriv->buf); pPriv->buf = NULL; pPriv->videoStatus = 0; } } else { if (pPriv->videoStatus & CLIENT_VIDEO_ON) { pPriv->videoStatus |= OFF_TIMER; pPriv->offTime = currentTime.milliseconds + OFF_DELAY; } } } static int I830SetPortAttributeTextured(ScrnInfoPtr pScrn, Atom attribute, INT32 value, pointer data) { I830PortPrivPtr pPriv = (I830PortPrivPtr) data; if (attribute == xvBrightness) { if ((value < -128) || (value > 127)) return BadValue; pPriv->brightness = value; return Success; } else if (attribute == xvContrast) { if ((value < 0) || (value > 255)) return BadValue; pPriv->contrast = value; return Success; } else if (attribute == xvSyncToVblank) { if ((value < -1) || (value > 1)) return BadValue; pPriv->SyncToVblank = value; return Success; } else { return BadMatch; } } static int I830SetPortAttribute(ScrnInfoPtr pScrn, Atom attribute, INT32 value, pointer data) { I830PortPrivPtr pPriv = (I830PortPrivPtr) data; I830Ptr pI830 = I830PTR(pScrn); I830OverlayRegPtr overlay; overlay = I830OVERLAYREG(pI830); if (attribute == xvBrightness) { if ((value < -128) || (value > 127)) return BadValue; pPriv->brightness = value; overlay->OCLRC0 = (pPriv->contrast << 18) | (pPriv->brightness & 0xff); OVERLAY_DEBUG("BRIGHTNESS\n"); i830_overlay_continue (pScrn, FALSE); } else if (attribute == xvContrast) { if ((value < 0) || (value > 255)) return BadValue; pPriv->contrast = value; overlay->OCLRC0 = (pPriv->contrast << 18) | (pPriv->brightness & 0xff); OVERLAY_DEBUG("CONTRAST\n"); i830_overlay_continue (pScrn, FALSE); } else if (attribute == xvSaturation) { if ((value < 0) || (value > 1023)) return BadValue; pPriv->saturation = value; overlay->OCLRC1 = pPriv->saturation; i830_overlay_continue (pScrn, FALSE); } else if (attribute == xvPipe) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); if ((value < -1) || (value > xf86_config->num_crtc)) return BadValue; if (value < 0) pPriv->desired_crtc = NULL; else pPriv->desired_crtc = xf86_config->crtc[value]; /* * Leave this to be updated at the next frame */ } else if (attribute == xvGamma0 && (IS_I9XX(pI830))) { pPriv->gamma0 = value; } else if (attribute == xvGamma1 && (IS_I9XX(pI830))) { pPriv->gamma1 = value; } else if (attribute == xvGamma2 && (IS_I9XX(pI830))) { pPriv->gamma2 = value; } else if (attribute == xvGamma3 && (IS_I9XX(pI830))) { pPriv->gamma3 = value; } else if (attribute == xvGamma4 && (IS_I9XX(pI830))) { pPriv->gamma4 = value; } else if (attribute == xvGamma5 && (IS_I9XX(pI830))) { pPriv->gamma5 = value; } else if (attribute == xvColorKey) { pPriv->colorKey = value; switch (pScrn->depth) { case 16: overlay->DCLRKV = RGB16ToColorKey(pPriv->colorKey); break; case 15: overlay->DCLRKV = RGB15ToColorKey(pPriv->colorKey); break; default: overlay->DCLRKV = pPriv->colorKey; break; } OVERLAY_DEBUG("COLORKEY\n"); i830_overlay_continue (pScrn, FALSE); REGION_EMPTY(pScrn->pScreen, &pPriv->clip); } else if(attribute == xvDoubleBuffer) { if ((value < 0) || (value > 1)) return BadValue; /* Do not allow buffer change while playing video */ if(!pI830->overlayOn) pPriv->doubleBuffer = value; } else return BadMatch; /* Ensure that the overlay is off, ready for updating */ if ((attribute == xvGamma0 || attribute == xvGamma1 || attribute == xvGamma2 || attribute == xvGamma3 || attribute == xvGamma4 || attribute == xvGamma5) && (IS_I9XX(pI830))) { OVERLAY_DEBUG("GAMMA\n"); I830UpdateGamma(pScrn); } return Success; } static int I830GetPortAttribute(ScrnInfoPtr pScrn, Atom attribute, INT32 * value, pointer data) { I830Ptr pI830 = I830PTR(pScrn); I830PortPrivPtr pPriv = (I830PortPrivPtr) data; if (attribute == xvBrightness) { *value = pPriv->brightness; } else if (attribute == xvContrast) { *value = pPriv->contrast; } else if (attribute == xvSaturation) { *value = pPriv->saturation; } else if (attribute == xvPipe) { int c; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); for (c = 0; c < xf86_config->num_crtc; c++) if (xf86_config->crtc[c] == pPriv->desired_crtc) break; if (c == xf86_config->num_crtc) c = -1; *value = c; } else if (attribute == xvGamma0 && (IS_I9XX(pI830))) { *value = pPriv->gamma0; } else if (attribute == xvGamma1 && (IS_I9XX(pI830))) { *value = pPriv->gamma1; } else if (attribute == xvGamma2 && (IS_I9XX(pI830))) { *value = pPriv->gamma2; } else if (attribute == xvGamma3 && (IS_I9XX(pI830))) { *value = pPriv->gamma3; } else if (attribute == xvGamma4 && (IS_I9XX(pI830))) { *value = pPriv->gamma4; } else if (attribute == xvGamma5 && (IS_I9XX(pI830))) { *value = pPriv->gamma5; } else if (attribute == xvColorKey) { *value = pPriv->colorKey; } else if (attribute == xvDoubleBuffer) { *value = pPriv->doubleBuffer; } else if (attribute == xvSyncToVblank) { *value = pPriv->SyncToVblank; } else return BadMatch; return Success; } static void I830QueryBestSize(ScrnInfoPtr pScrn, Bool motion, short vid_w, short vid_h, short drw_w, short drw_h, unsigned int *p_w, unsigned int *p_h, pointer data) { if (vid_w > (drw_w << 1)) drw_w = vid_w >> 1; if (vid_h > (drw_h << 1)) drw_h = vid_h >> 1; *p_w = drw_w; *p_h = drw_h; } static void I830CopyPackedData(ScrnInfoPtr pScrn, I830PortPrivPtr pPriv, unsigned char *buf, int srcPitch, int dstPitch, int top, int left, int h, int w) { I830Ptr pI830 = I830PTR(pScrn); unsigned char *src, *dst, *dst_base; int i,j; unsigned char *s; #if 0 ErrorF("I830CopyPackedData: (%d,%d) (%d,%d)\n" "srcPitch: %d, dstPitch: %d\n", top, left, h, w, srcPitch, dstPitch); #endif src = buf + (top * srcPitch) + (left << 1); if (pPriv->textured) { drm_intel_bo_map(pPriv->buf, TRUE); dst_base = pPriv->buf->virtual; } else { drm_intel_gem_bo_start_gtt_access(pPriv->buf, TRUE); dst_base = pI830->FbBase; } if (pPriv->currentBuf == 0) dst = dst_base + pPriv->YBuf0offset; else dst = dst_base + pPriv->YBuf1offset; switch (pPriv->rotation) { case RR_Rotate_0: w <<= 1; for (i = 0; i < h; i++) { memcpy(dst, src, w); src += srcPitch; dst += dstPitch; } break; case RR_Rotate_90: h <<= 1; for (i = 0; i < h; i+=2) { s = src; for (j = 0; j < w; j++) { /* Copy Y */ dst[(i + 0) + ((w - j - 1) * dstPitch)] = *s++; (void)*s++; } src += srcPitch; } h >>= 1; src = buf + (top * srcPitch) + (left << 1); for (i = 0; i < h; i+=2) { for (j = 0; j < w; j+=2) { /* Copy U */ dst[((i*2) + 1) + ((w - j - 1) * dstPitch)] = src[(j*2) + 1 + (i * srcPitch)]; dst[((i*2) + 1) + ((w - j - 2) * dstPitch)] = src[(j*2) + 1 + ((i+1) * srcPitch)]; /* Copy V */ dst[((i*2) + 3) + ((w - j - 1) * dstPitch)] = src[(j*2) + 3 + (i * srcPitch)]; dst[((i*2) + 3) + ((w - j - 2) * dstPitch)] = src[(j*2) + 3 + ((i+1) * srcPitch)]; } } break; case RR_Rotate_180: w <<= 1; for (i = 0; i < h; i++) { s = src; for (j = 0; j < w; j+=4) { dst[(w - j - 4) + ((h - i - 1) * dstPitch)] = *s++; dst[(w - j - 3) + ((h - i - 1) * dstPitch)] = *s++; dst[(w - j - 2) + ((h - i - 1) * dstPitch)] = *s++; dst[(w - j - 1) + ((h - i - 1) * dstPitch)] = *s++; } src += srcPitch; } break; case RR_Rotate_270: h <<= 1; for (i = 0; i < h; i+=2) { s = src; for (j = 0; j < w; j++) { /* Copy Y */ dst[(h - i - 2) + (j * dstPitch)] = *s++; (void)*s++; } src += srcPitch; } h >>= 1; src = buf + (top * srcPitch) + (left << 1); for (i = 0; i < h; i+=2) { for (j = 0; j < w; j+=2) { /* Copy U */ dst[(((h - i)*2) - 3) + (j * dstPitch)] = src[(j*2) + 1 + (i * srcPitch)]; dst[(((h - i)*2) - 3) + ((j - 1) * dstPitch)] = src[(j*2) + 1 + ((i+1) * srcPitch)]; /* Copy V */ dst[(((h - i)*2) - 1) + (j * dstPitch)] = src[(j*2) + 3 + (i * srcPitch)]; dst[(((h - i)*2) - 1) + ((j - 1) * dstPitch)] = src[(j*2) + 3 + ((i+1) * srcPitch)]; } } break; } if (pPriv->textured) drm_intel_bo_unmap(pPriv->buf); } static void I830CopyPlanarData(ScrnInfoPtr pScrn, I830PortPrivPtr pPriv, unsigned char *buf, int srcPitch, int srcPitch2, int dstPitch, int srcH, int top, int left, int h, int w, int id) { I830Ptr pI830 = I830PTR(pScrn); int i, j = 0; unsigned char *src1, *src2, *src3, *dst_base, *dst1, *dst2, *dst3; unsigned char *s; int dstPitch2 = dstPitch << 1; #if 0 ErrorF("I830CopyPlanarData: srcPitch %d, srcPitch %d, dstPitch %d\n" "nlines %d, npixels %d, top %d, left %d\n", srcPitch, srcPitch2, dstPitch, h, w, top, left); #endif /* Copy Y data */ src1 = buf + (top * srcPitch) + left; #if 0 ErrorF("src1 is %p, offset is %ld\n", src1, (unsigned long)src1 - (unsigned long)buf); #endif if (pPriv->textured) { drm_intel_bo_map(pPriv->buf, TRUE); dst_base = pPriv->buf->virtual; } else { drm_intel_gem_bo_start_gtt_access(pPriv->buf, TRUE); dst_base = pI830->FbBase; } if (pPriv->currentBuf == 0) dst1 = dst_base + pPriv->YBuf0offset; else dst1 = dst_base + pPriv->YBuf1offset; switch (pPriv->rotation) { case RR_Rotate_0: if (srcPitch == dstPitch2) memcpy (dst1, src1, srcPitch * h); else for (i = 0; i < h; i++) { memcpy(dst1, src1, w); src1 += srcPitch; dst1 += dstPitch2; } break; case RR_Rotate_90: for (i = 0; i < h; i++) { s = src1; for (j = 0; j < w; j++) { dst1[(i) + ((w - j - 1) * dstPitch2)] = *s++; } src1 += srcPitch; } break; case RR_Rotate_180: for (i = 0; i < h; i++) { s = src1; for (j = 0; j < w; j++) { dst1[(w - j - 1) + ((h - i - 1) * dstPitch2)] = *s++; } src1 += srcPitch; } break; case RR_Rotate_270: for (i = 0; i < h; i++) { s = src1; for (j = 0; j < w; j++) { dst1[(h - i - 1) + (j * dstPitch2)] = *s++; } src1 += srcPitch; } break; } /* Copy V data for YV12, or U data for I420 */ src2 = buf + (srcH * srcPitch) + ((top * srcPitch) >> 2) + (left >> 1); #if 0 ErrorF("src2 is %p, offset is %ld\n", src2, (unsigned long)src2 - (unsigned long)buf); #endif if (pPriv->currentBuf == 0) { if (id == FOURCC_I420) dst2 = dst_base + pPriv->UBuf0offset; else dst2 = dst_base + pPriv->VBuf0offset; } else { if (id == FOURCC_I420) dst2 = dst_base + pPriv->UBuf1offset; else dst2 = dst_base + pPriv->VBuf1offset; } switch (pPriv->rotation) { case RR_Rotate_0: if (srcPitch2 == dstPitch) memcpy (dst2, src2, h/2 * srcPitch2); else for (i = 0; i < h / 2; i++) { memcpy(dst2, src2, w / 2); src2 += srcPitch2; dst2 += dstPitch; } break; case RR_Rotate_90: for (i = 0; i < (h/2); i++) { s = src2; for (j = 0; j < (w/2); j++) { dst2[(i) + (((w/2) - j - 1) * (dstPitch))] = *s++; } src2 += srcPitch2; } break; case RR_Rotate_180: for (i = 0; i < (h/2); i++) { s = src2; for (j = 0; j < (w/2); j++) { dst2[((w/2) - j - 1) + (((h/2) - i - 1) * dstPitch)] = *s++; } src2 += srcPitch2; } break; case RR_Rotate_270: for (i = 0; i < (h/2); i++) { s = src2; for (j = 0; j < (w/2); j++) { dst2[((h/2) - i - 1) + (j * dstPitch)] = *s++; } src2 += srcPitch2; } break; } /* Copy U data for YV12, or V data for I420 */ src3 = buf + (srcH * srcPitch) + ((srcH >> 1) * srcPitch2) + ((top * srcPitch) >> 2) + (left >> 1); #if 0 ErrorF("src3 is %p, offset is %ld\n", src3, (unsigned long)src3 - (unsigned long)buf); #endif if (pPriv->currentBuf == 0) { if (id == FOURCC_I420) dst3 = dst_base + pPriv->VBuf0offset; else dst3 = dst_base + pPriv->UBuf0offset; } else { if (id == FOURCC_I420) dst3 = dst_base + pPriv->VBuf1offset; else dst3 = dst_base + pPriv->UBuf1offset; } switch (pPriv->rotation) { case RR_Rotate_0: if (srcPitch2 == dstPitch) memcpy (dst3, src3, srcPitch2 * h/2); else for (i = 0; i < h / 2; i++) { memcpy(dst3, src3, w / 2); src3 += srcPitch2; dst3 += dstPitch; } break; case RR_Rotate_90: for (i = 0; i < (h/2); i++) { s = src3; for (j = 0; j < (w/2); j++) { dst3[(i) + (((w/2) - j - 1) * (dstPitch))] = *s++; } src3 += srcPitch2; } break; case RR_Rotate_180: for (i = 0; i < (h/2); i++) { s = src3; for (j = 0; j < (w/2); j++) { dst3[((w/2) - j - 1) + (((h/2) - i - 1) * dstPitch)] = *s++; } src3 += srcPitch2; } break; case RR_Rotate_270: for (i = 0; i < (h/2); i++) { s = src3; for (j = 0; j < (w/2); j++) { dst3[((h/2) - i - 1) + (j * dstPitch)] = *s++; } src3 += srcPitch2; } break; } if (pPriv->textured) drm_intel_bo_unmap(pPriv->buf); } typedef struct { uint8_t sign; uint16_t mantissa; uint8_t exponent; } coeffRec, *coeffPtr; static Bool SetCoeffRegs(double *coeff, int mantSize, coeffPtr pCoeff, int pos) { int maxVal, icoeff, res; int sign; double c; sign = 0; maxVal = 1 << mantSize; c = *coeff; if (c < 0.0) { sign = 1; c = -c; } res = 12 - mantSize; if ((icoeff = (int)(c * 4 * maxVal + 0.5)) < maxVal) { pCoeff[pos].exponent = 3; pCoeff[pos].mantissa = icoeff << res; *coeff = (double)icoeff / (double)(4 * maxVal); } else if ((icoeff = (int)(c * 2 * maxVal + 0.5)) < maxVal) { pCoeff[pos].exponent = 2; pCoeff[pos].mantissa = icoeff << res; *coeff = (double)icoeff / (double)(2 * maxVal); } else if ((icoeff = (int)(c * maxVal + 0.5)) < maxVal) { pCoeff[pos].exponent = 1; pCoeff[pos].mantissa = icoeff << res; *coeff = (double)icoeff / (double)(maxVal); } else if ((icoeff = (int)(c * maxVal * 0.5 + 0.5)) < maxVal) { pCoeff[pos].exponent = 0; pCoeff[pos].mantissa = icoeff << res; *coeff = (double)icoeff / (double)(maxVal / 2); } else { /* Coeff out of range */ return FALSE; } pCoeff[pos].sign = sign; if (sign) *coeff = -(*coeff); return TRUE; } static void UpdateCoeff(int taps, double fCutoff, Bool isHoriz, Bool isY, coeffPtr pCoeff) { int i, j, j1, num, pos, mantSize; double pi = 3.1415926535, val, sinc, window, sum; double rawCoeff[MAX_TAPS * 32], coeffs[N_PHASES][MAX_TAPS]; double diff; int tapAdjust[MAX_TAPS], tap2Fix; Bool isVertAndUV; if (isHoriz) mantSize = 7; else mantSize = 6; isVertAndUV = !isHoriz && !isY; num = taps * 16; for (i = 0; i < num * 2; i++) { val = (1.0 / fCutoff) * taps * pi * (i - num) / (2 * num); if (val == 0.0) sinc = 1.0; else sinc = sin(val) / val; /* Hamming window */ window = (0.5 - 0.5 * cos(i * pi / num)); rawCoeff[i] = sinc * window; } for (i = 0; i < N_PHASES; i++) { /* Normalise the coefficients. */ sum = 0.0; for (j = 0; j < taps; j++) { pos = i + j * 32; sum += rawCoeff[pos]; } for (j = 0; j < taps; j++) { pos = i + j * 32; coeffs[i][j] = rawCoeff[pos] / sum; } /* Set the register values. */ for (j = 0; j < taps; j++) { pos = j + i * taps; if ((j == (taps - 1) / 2) && !isVertAndUV) SetCoeffRegs(&coeffs[i][j], mantSize + 2, pCoeff, pos); else SetCoeffRegs(&coeffs[i][j], mantSize, pCoeff, pos); } tapAdjust[0] = (taps - 1) / 2; for (j = 1, j1 = 1; j <= tapAdjust[0]; j++, j1++) { tapAdjust[j1] = tapAdjust[0] - j; tapAdjust[++j1] = tapAdjust[0] + j; } /* Adjust the coefficients. */ sum = 0.0; for (j = 0; j < taps; j++) sum += coeffs[i][j]; if (sum != 1.0) { for (j1 = 0; j1 < taps; j1++) { tap2Fix = tapAdjust[j1]; diff = 1.0 - sum; coeffs[i][tap2Fix] += diff; pos = tap2Fix + i * taps; if ((tap2Fix == (taps - 1) / 2) && !isVertAndUV) SetCoeffRegs(&coeffs[i][tap2Fix], mantSize + 2, pCoeff, pos); else SetCoeffRegs(&coeffs[i][tap2Fix], mantSize, pCoeff, pos); sum = 0.0; for (j = 0; j < taps; j++) sum += coeffs[i][j]; if (sum == 1.0) break; } } } } static void i830_box_intersect (BoxPtr dest, BoxPtr a, BoxPtr b) { dest->x1 = a->x1 > b->x1 ? a->x1 : b->x1; dest->x2 = a->x2 < b->x2 ? a->x2 : b->x2; dest->y1 = a->y1 > b->y1 ? a->y1 : b->y1; dest->y2 = a->y2 < b->y2 ? a->y2 : b->y2; if (dest->x1 >= dest->x2 || dest->y1 >= dest->y2) dest->x1 = dest->x2 = dest->y1 = dest->y2 = 0; } static void i830_crtc_box (xf86CrtcPtr crtc, BoxPtr crtc_box) { if (crtc->enabled) { crtc_box->x1 = crtc->x; crtc_box->x2 = crtc->x + xf86ModeWidth (&crtc->mode, crtc->rotation); crtc_box->y1 = crtc->y; crtc_box->y2 = crtc->y + xf86ModeHeight (&crtc->mode, crtc->rotation); } else crtc_box->x1 = crtc_box->x2 = crtc_box->y1 = crtc_box->y2 = 0; } static int i830_box_area (BoxPtr box) { return (int) (box->x2 - box->x1) * (int) (box->y2 - box->y1); } /* * Return the crtc covering 'box'. If two crtcs cover a portion of * 'box', then prefer 'desired'. If 'desired' is NULL, then prefer the crtc * with greater coverage */ static xf86CrtcPtr i830_covering_crtc (ScrnInfoPtr pScrn, BoxPtr box, xf86CrtcPtr desired, BoxPtr crtc_box_ret) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); xf86CrtcPtr crtc, best_crtc; int coverage, best_coverage; int c; BoxRec crtc_box, cover_box; best_crtc = NULL; best_coverage = 0; crtc_box_ret->x1 = 0; crtc_box_ret->x2 = 0; crtc_box_ret->y1 = 0; crtc_box_ret->y2 = 0; for (c = 0; c < xf86_config->num_crtc; c++) { crtc = xf86_config->crtc[c]; i830_crtc_box (crtc, &crtc_box); i830_box_intersect (&cover_box, &crtc_box, box); coverage = i830_box_area (&cover_box); if (coverage && crtc == desired) { *crtc_box_ret = crtc_box; return crtc; } if (coverage > best_coverage) { *crtc_box_ret = crtc_box; best_crtc = crtc; best_coverage = coverage; } } return best_crtc; } static int i830_swidth (I830Ptr pI830, unsigned int offset, unsigned int width, unsigned int mask, int shift) { int swidth = ((offset + width + mask) >> shift) - (offset >> shift); if (IS_I9XX(pI830)) swidth <<= 1; swidth -= 1; return swidth << 2; } static void i830_display_video(ScrnInfoPtr pScrn, xf86CrtcPtr crtc, int id, short width, short height, int dstPitch, int x1, int y1, int x2, int y2, BoxPtr dstBox, short src_w, short src_h, short drw_w, short drw_h) { I830Ptr pI830 = I830PTR(pScrn); I830PortPrivPtr pPriv = pI830->adaptor->pPortPrivates[0].ptr; I830OverlayRegPtr overlay = I830OVERLAYREG(pI830); unsigned int swidth, swidthy, swidthuv; unsigned int mask, shift, offsety, offsetu; int tmp; uint32_t OCMD; Bool scaleChanged = FALSE; OVERLAY_DEBUG("I830DisplayVideo: %dx%d (pitch %d)\n", width, height, dstPitch); #if VIDEO_DEBUG CompareOverlay(pI830, (uint32_t *) overlay, 0x100); #endif /* * If the video isn't visible on any CRTC, turn it off */ if (!crtc) { pPriv->current_crtc = NULL; i830_overlay_off (pScrn); return; } if (crtc != pPriv->current_crtc) { i830_overlay_switch_to_crtc (pScrn, crtc); if (pPriv->overlayOK) { pPriv->current_crtc = crtc; I830ResetVideo (pScrn); } } if (!pPriv->overlayOK) return; switch (crtc->rotation & 0xf) { /* for overlay, we should take it from crtc's screen * coordinate to current crtc's display mode. * yeah, a bit confusing. */ case RR_Rotate_0: dstBox->x1 -= crtc->x; dstBox->x2 -= crtc->x; dstBox->y1 -= crtc->y; dstBox->y2 -= crtc->y; break; case RR_Rotate_90: tmp = dstBox->x1; dstBox->x1 = dstBox->y1 - crtc->x; dstBox->y1 = pScrn->virtualX - tmp - crtc->y; tmp = dstBox->x2; dstBox->x2 = dstBox->y2 - crtc->x; dstBox->y2 = pScrn->virtualX - tmp - crtc->y; tmp = dstBox->y1; dstBox->y1 = dstBox->y2; dstBox->y2 = tmp; break; case RR_Rotate_180: tmp = dstBox->x1; dstBox->x1 = pScrn->virtualX - dstBox->x2 - crtc->x; dstBox->x2 = pScrn->virtualX - tmp - crtc->x; tmp = dstBox->y1; dstBox->y1 = pScrn->virtualY - dstBox->y2 - crtc->y; dstBox->y2 = pScrn->virtualY - tmp - crtc->y; break; case RR_Rotate_270: tmp = dstBox->x1; dstBox->x1 = pScrn->virtualY - dstBox->y1 - crtc->x; dstBox->y1 = tmp - crtc->y; tmp = dstBox->x2; dstBox->x2 = pScrn->virtualY - dstBox->y2 - crtc->x; dstBox->y2 = tmp - crtc->y; tmp = dstBox->x1; dstBox->x1 = dstBox->x2; dstBox->x2 = tmp; break; } if (crtc->rotation & (RR_Rotate_90 | RR_Rotate_270)) { tmp = width; width = height; height = tmp; tmp = drw_w; drw_w = drw_h; drw_h = tmp; tmp = src_w; src_w = src_h; src_h = tmp; } if (pPriv->oneLineMode) { /* change the coordinates with panel fitting active */ dstBox->y1 = (((dstBox->y1 - 1) * pPriv->scaleRatio) >> 16) + 1; dstBox->y2 = ((dstBox->y2 * pPriv->scaleRatio) >> 16) + 1; /* Now, alter the height, so we scale to the correct size */ drw_h = ((drw_h * pPriv->scaleRatio) >> 16) + 1; } if (IS_I9XX(pI830)) { shift = 6; mask = 0x3f; } else { shift = 5; mask = 0x1f; } if (pPriv->currentBuf == 0) { offsety = pPriv->YBuf0offset; offsetu = pPriv->UBuf0offset; } else { offsety = pPriv->YBuf1offset; offsetu = pPriv->UBuf1offset; } switch (id) { case FOURCC_YV12: case FOURCC_I420: overlay->SWIDTH = width | ((width/2 & 0x7ff) << 16); swidthy = i830_swidth (pI830, offsety, width, mask, shift); swidthuv = i830_swidth (pI830, offsetu, width/2, mask, shift); overlay->SWIDTHSW = (swidthy) | (swidthuv << 16); overlay->SHEIGHT = height | ((height / 2) << 16); break; case FOURCC_UYVY: case FOURCC_YUY2: default: overlay->SWIDTH = width; swidth = ((offsety + (width << 1) + mask) >> shift) - (offsety >> shift); if (IS_I9XX(pI830)) swidth <<= 1; swidth -= 1; swidth <<= 2; OVERLAY_DEBUG("swidthsw is old %d new %d\n", swidth, i830_swidth (pI830, offsety, width << 1, mask, shift)); overlay->SWIDTHSW = swidth; overlay->SHEIGHT = height; break; } overlay->DWINPOS = (dstBox->y1 << 16) | dstBox->x1; overlay->DWINSZ = (((dstBox->y2 - dstBox->y1) << 16) | (dstBox->x2 - dstBox->x1)); OVERLAY_DEBUG("dstBox: x1: %d, y1: %d, x2: %d, y2: %d\n", dstBox->x1, dstBox->y1, dstBox->x2, dstBox->y2); /* buffer locations */ overlay->OBUF_0Y = pPriv->YBuf0offset; overlay->OBUF_0U = pPriv->UBuf0offset; overlay->OBUF_0V = pPriv->VBuf0offset; if(pPriv->doubleBuffer) { overlay->OBUF_1Y = pPriv->YBuf1offset; overlay->OBUF_1U = pPriv->UBuf1offset; overlay->OBUF_1V = pPriv->VBuf1offset; } OVERLAY_DEBUG("pos: 0x%x, size: 0x%x\n", overlay->DWINPOS, overlay->DWINSZ); OVERLAY_DEBUG("dst: %d x %d, src: %d x %d\n", drw_w, drw_h, src_w, src_h); /* * Calculate horizontal and vertical scaling factors and polyphase * coefficients. */ { int xscaleInt, xscaleFract, yscaleInt, yscaleFract; int xscaleIntUV, xscaleFractUV; int yscaleIntUV, yscaleFractUV; /* UV is half the size of Y -- YUV420 */ int uvratio = 2; uint32_t newval; coeffRec xcoeffY[N_HORIZ_Y_TAPS * N_PHASES]; coeffRec xcoeffUV[N_HORIZ_UV_TAPS * N_PHASES]; int i, j, pos; /* * Y down-scale factor as a multiple of 4096. */ xscaleFract = ((src_w - 1) << 12) / drw_w; yscaleFract = ((src_h - 1) << 12) / drw_h; /* Calculate the UV scaling factor. */ xscaleFractUV = xscaleFract / uvratio; yscaleFractUV = yscaleFract / uvratio; /* * To keep the relative Y and UV ratios exact, round the Y scales * to a multiple of the Y/UV ratio. */ xscaleFract = xscaleFractUV * uvratio; yscaleFract = yscaleFractUV * uvratio; /* Integer (un-multiplied) values. */ xscaleInt = xscaleFract >> 12; yscaleInt = yscaleFract >> 12; xscaleIntUV = xscaleFractUV >> 12; yscaleIntUV = yscaleFractUV >> 12; OVERLAY_DEBUG("xscale: %x.%03x, yscale: %x.%03x\n", xscaleInt, xscaleFract & 0xFFF, yscaleInt, yscaleFract & 0xFFF); OVERLAY_DEBUG("UV xscale: %x.%03x, UV yscale: %x.%03x\n", xscaleIntUV, xscaleFractUV & 0xFFF, yscaleIntUV, yscaleFractUV & 0xFFF); /* shouldn't get here */ if (xscaleInt > 7) { OVERLAY_DEBUG("xscale: bad scale\n"); return; } /* shouldn't get here */ if (xscaleIntUV > 7) { OVERLAY_DEBUG("xscaleUV: bad scale\n"); return; } newval = (xscaleInt << 16) | ((xscaleFract & 0xFFF) << 3) | ((yscaleFract & 0xFFF) << 20); if (newval != overlay->YRGBSCALE) { scaleChanged = TRUE; overlay->YRGBSCALE = newval; } newval = (xscaleIntUV << 16) | ((xscaleFractUV & 0xFFF) << 3) | ((yscaleFractUV & 0xFFF) << 20); if (newval != overlay->UVSCALE) { scaleChanged = TRUE; overlay->UVSCALE = newval; } newval = yscaleInt << 16 | yscaleIntUV; if (newval != overlay->UVSCALEV) { scaleChanged = TRUE; overlay->UVSCALEV = newval; } /* Recalculate coefficients if the scaling changed. */ /* * Only Horizontal coefficients so far. */ if (scaleChanged) { double fCutoffY; double fCutoffUV; fCutoffY = xscaleFract / 4096.0; fCutoffUV = xscaleFractUV / 4096.0; /* Limit to between 1.0 and 3.0. */ if (fCutoffY < MIN_CUTOFF_FREQ) fCutoffY = MIN_CUTOFF_FREQ; if (fCutoffY > MAX_CUTOFF_FREQ) fCutoffY = MAX_CUTOFF_FREQ; if (fCutoffUV < MIN_CUTOFF_FREQ) fCutoffUV = MIN_CUTOFF_FREQ; if (fCutoffUV > MAX_CUTOFF_FREQ) fCutoffUV = MAX_CUTOFF_FREQ; UpdateCoeff(N_HORIZ_Y_TAPS, fCutoffY, TRUE, TRUE, xcoeffY); UpdateCoeff(N_HORIZ_UV_TAPS, fCutoffUV, TRUE, FALSE, xcoeffUV); for (i = 0; i < N_PHASES; i++) { for (j = 0; j < N_HORIZ_Y_TAPS; j++) { pos = i * N_HORIZ_Y_TAPS + j; overlay->Y_HCOEFS[pos] = (xcoeffY[pos].sign << 15 | xcoeffY[pos].exponent << 12 | xcoeffY[pos].mantissa); } } for (i = 0; i < N_PHASES; i++) { for (j = 0; j < N_HORIZ_UV_TAPS; j++) { pos = i * N_HORIZ_UV_TAPS + j; overlay->UV_HCOEFS[pos] = (xcoeffUV[pos].sign << 15 | xcoeffUV[pos].exponent << 12 | xcoeffUV[pos].mantissa); } } } } OCMD = OVERLAY_ENABLE; switch (id) { case FOURCC_YV12: case FOURCC_I420: #ifdef INTEL_XVMC case FOURCC_XVMC: #endif OVERLAY_DEBUG("YUV420\n"); #if 0 /* set UV vertical phase to -0.25 */ overlay->UV_VPH = 0x30003000; #endif OVERLAY_DEBUG("UV stride is %d, Y stride is %d\n", dstPitch, dstPitch * 2); overlay->OSTRIDE = (dstPitch * 2) | (dstPitch << 16); OCMD &= ~SOURCE_FORMAT; OCMD &= ~OV_BYTE_ORDER; OCMD |= YUV_420; break; case FOURCC_UYVY: case FOURCC_YUY2: OVERLAY_DEBUG("YUV422\n"); overlay->OSTRIDE = dstPitch; OCMD &= ~SOURCE_FORMAT; OCMD |= YUV_422; OCMD &= ~OV_BYTE_ORDER; if (id == FOURCC_UYVY) OCMD |= Y_SWAP; break; } OCMD &= ~(BUFFER_SELECT | FIELD_SELECT); if (pPriv->currentBuf == 0) OCMD |= BUFFER0; else OCMD |= BUFFER1; overlay->OCMD = OCMD; OVERLAY_DEBUG("OCMD is 0x%x\n", OCMD); /* make sure the overlay is on */ i830_overlay_on (pScrn); /* and show this frame */ i830_overlay_continue (pScrn, scaleChanged); } static Bool i830_clip_video_helper (ScrnInfoPtr pScrn, I830PortPrivPtr pPriv, xf86CrtcPtr *crtc_ret, BoxPtr dst, INT32 *xa, INT32 *xb, INT32 *ya, INT32 *yb, RegionPtr reg, INT32 width, INT32 height) { Bool ret; RegionRec crtc_region_local; RegionPtr crtc_region = reg; /* * For overlay video, compute the relevant CRTC and * clip video to that */ if (crtc_ret) { BoxRec crtc_box; xf86CrtcPtr crtc = i830_covering_crtc (pScrn, dst, pPriv->desired_crtc, &crtc_box); /* For textured video, we don't actually want to clip at all. */ if (crtc && !pPriv->textured) { REGION_INIT (pScreen, &crtc_region_local, &crtc_box, 1); crtc_region = &crtc_region_local; REGION_INTERSECT (pScreen, crtc_region, crtc_region, reg); } *crtc_ret = crtc; } ret = xf86XVClipVideoHelper (dst, xa, xb, ya, yb, crtc_region, width, height); if (crtc_region != reg) REGION_UNINIT (pScreen, &crtc_region_local); return ret; } static void i830_fill_colorkey (ScreenPtr pScreen, uint32_t key, RegionPtr clipboxes) { DrawablePtr root = &WindowTable[pScreen->myNum]->drawable; XID pval[2]; BoxPtr pbox = REGION_RECTS(clipboxes); int i, nbox = REGION_NUM_RECTS(clipboxes); xRectangle *rects; GCPtr gc; if(!xf86Screens[pScreen->myNum]->vtSema) return; gc = GetScratchGC(root->depth, pScreen); pval[0] = key; pval[1] = IncludeInferiors; (void) ChangeGC(gc, GCForeground|GCSubwindowMode, pval); ValidateGC(root, gc); rects = xalloc (nbox * sizeof(xRectangle)); for(i = 0; i < nbox; i++, pbox++) { rects[i].x = pbox->x1; rects[i].y = pbox->y1; rects[i].width = pbox->x2 - pbox->x1; rects[i].height = pbox->y2 - pbox->y1; } (*gc->ops->PolyFillRect)(root, gc, nbox, rects); xfree (rects); FreeScratchGC (gc); } /* * The source rectangle of the video is defined by (src_x, src_y, src_w, src_h). * The dest rectangle of the video is defined by (drw_x, drw_y, drw_w, drw_h). * id is a fourcc code for the format of the video. * buf is the pointer to the source data in system memory. * width and height are the w/h of the source data. * If "sync" is TRUE, then we must be finished with *buf at the point of return * (which we always are). * clipBoxes is the clipping region in screen space. * data is a pointer to our port private. * pDraw is a Drawable, which might not be the screen in the case of * compositing. It's a new argument to the function in the 1.1 server. */ static int I830PutImage(ScrnInfoPtr pScrn, short src_x, short src_y, short drw_x, short drw_y, short src_w, short src_h, short drw_w, short drw_h, int id, unsigned char *buf, short width, short height, Bool sync, RegionPtr clipBoxes, pointer data, DrawablePtr pDraw) { I830Ptr pI830 = I830PTR(pScrn); I830PortPrivPtr pPriv = (I830PortPrivPtr) data; ScreenPtr pScreen = screenInfo.screens[pScrn->scrnIndex]; I830OverlayRegPtr overlay; PixmapPtr pPixmap; INT32 x1, x2, y1, y2; int srcPitch = 0, srcPitch2 = 0, dstPitch, destId; int dstPitch2 = 0; int top, left, npixels, nlines, size; BoxRec dstBox; int pitchAlignMask; int alloc_size; xf86CrtcPtr crtc; if (pPriv->textured) overlay = NULL; else overlay = I830OVERLAYREG(pI830); #if 0 ErrorF("I830PutImage: src: (%d,%d)(%d,%d), dst: (%d,%d)(%d,%d)\n" "width %d, height %d\n", src_x, src_y, src_w, src_h, drw_x, drw_y, drw_w, drw_h, width, height); #endif if (!pPriv->textured) { /* If dst width and height are less than 1/8th the src size, the * src/dst scale factor becomes larger than 8 and doesn't fit in * the scale register. */ if(src_w >= (drw_w * 8)) drw_w = src_w/7; if(src_h >= (drw_h * 8)) drw_h = src_h/7; } /* Clip */ x1 = src_x; x2 = src_x + src_w; y1 = src_y; y2 = src_y + src_h; dstBox.x1 = drw_x; dstBox.x2 = drw_x + drw_w; dstBox.y1 = drw_y; dstBox.y2 = drw_y + drw_h; if (!i830_clip_video_helper(pScrn, pPriv, &crtc, &dstBox, &x1, &x2, &y1, &y2, clipBoxes, width, height)) return Success; if (!pPriv->textured) { /* texture video handles rotation differently. */ if (crtc) pPriv->rotation = crtc->rotation; else { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Fail to clip video to any crtc!\n"); return Success; } } destId = id; switch (id) { case FOURCC_YV12: case FOURCC_I420: srcPitch = (width + 0x3) & ~0x3; srcPitch2 = ((width >> 1) + 0x3) & ~0x3; break; #ifdef INTEL_XVMC case FOURCC_XVMC: srcPitch = (width + 0x3) & ~0x3; srcPitch2 = ((width >> 1) + 0x3) & ~0x3; break; #endif case FOURCC_UYVY: case FOURCC_YUY2: default: srcPitch = width << 1; break; } /* Only needs to be DWORD-aligned for textured on i915, but overlay has * stricter requirements. */ if (pPriv->textured) { pitchAlignMask = 3; #ifdef INTEL_XVMC /* for i915 xvmc, hw requires at least 1kb aligned surface */ if ((id == FOURCC_XVMC) && IS_I915(pI830)) pitchAlignMask = 0x3ff; #endif } else { if (IS_I965G(pI830)) pitchAlignMask = 255; else pitchAlignMask = 63; } /* Determine the desired destination pitch (representing the chroma's pitch, * in the planar case. */ switch (destId) { case FOURCC_YV12: case FOURCC_I420: if (pPriv->rotation & (RR_Rotate_90 | RR_Rotate_270)) { dstPitch = ((height / 2) + pitchAlignMask) & ~pitchAlignMask; size = dstPitch * width * 3; } else { dstPitch = ((width / 2) + pitchAlignMask) & ~pitchAlignMask; size = dstPitch * height * 3; } break; case FOURCC_UYVY: case FOURCC_YUY2: if (pPriv->rotation & (RR_Rotate_90 | RR_Rotate_270)) { dstPitch = ((height << 1) + pitchAlignMask) & ~pitchAlignMask; size = dstPitch * width; } else { dstPitch = ((width << 1) + pitchAlignMask) & ~pitchAlignMask; size = dstPitch * height; } break; #ifdef INTEL_XVMC case FOURCC_XVMC: dstPitch = ((width / 2) + pitchAlignMask ) & ~pitchAlignMask; dstPitch2 = (width + pitchAlignMask ) & ~pitchAlignMask; size = 0; break; #endif default: dstPitch = 0; size = 0; break; } #if 0 ErrorF("srcPitch: %d, dstPitch: %d, size: %d\n", srcPitch, dstPitch, size); #endif alloc_size = size; if (pPriv->doubleBuffer) alloc_size *= 2; /* Free the current buffer if we're going to have to reallocate */ if (pPriv->buf && pPriv->buf->size < alloc_size) { if (!pPriv->textured) drm_intel_bo_unpin(pPriv->buf); drm_intel_bo_unreference(pPriv->buf); pPriv->buf = NULL; } #ifdef INTEL_XVMC if (id == FOURCC_XVMC && pPriv->rotation == RR_Rotate_0) { if (pPriv->buf) { assert(pPriv->textured); drm_intel_bo_unreference(pPriv->buf); pPriv->buf = NULL; } } else { #endif if (pPriv->buf == NULL) { pPriv->buf = drm_intel_bo_alloc(pI830->bufmgr, "xv buffer", alloc_size, 4096); if (pPriv->buf == NULL) return BadAlloc; if (!pPriv->textured && drm_intel_bo_pin(pPriv->buf, 4096) != 0) { drm_intel_bo_unreference(pPriv->buf); pPriv->buf = NULL; xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Failed to pin xv buffer\n"); return BadAlloc; } } #ifdef INTEL_XVMC } #endif /* fixup pointers */ #ifdef INTEL_XVMC if (id == FOURCC_XVMC && IS_I915(pI830)) { pPriv->YBuf0offset = (uint32_t)((uintptr_t)buf); pPriv->VBuf0offset = pPriv->YBuf0offset + (dstPitch2 * height); pPriv->UBuf0offset = pPriv->VBuf0offset + (dstPitch * height / 2); destId = FOURCC_YV12; } else { #endif if (pPriv->textured) pPriv->YBuf0offset = 0; else pPriv->YBuf0offset = pPriv->buf->offset; if (pPriv->rotation & (RR_Rotate_90 | RR_Rotate_270)) { pPriv->UBuf0offset = pPriv->YBuf0offset + (dstPitch * 2 * width); pPriv->VBuf0offset = pPriv->UBuf0offset + (dstPitch * width / 2); if(pPriv->doubleBuffer) { pPriv->YBuf1offset = pPriv->YBuf0offset + size; pPriv->UBuf1offset = pPriv->YBuf1offset + (dstPitch * 2 * width); pPriv->VBuf1offset = pPriv->UBuf1offset + (dstPitch * width / 2); } } else { pPriv->UBuf0offset = pPriv->YBuf0offset + (dstPitch * 2 * height); pPriv->VBuf0offset = pPriv->UBuf0offset + (dstPitch * height / 2); if(pPriv->doubleBuffer) { pPriv->YBuf1offset = pPriv->YBuf0offset + size; pPriv->UBuf1offset = pPriv->YBuf1offset + (dstPitch * 2 * height); pPriv->VBuf1offset = pPriv->UBuf1offset + (dstPitch * height / 2); } } #ifdef INTEL_XVMC } #endif /* Pick the idle buffer */ if (!pPriv->textured && pI830->overlayOn && pPriv->doubleBuffer) pPriv->currentBuf = !((INREG(DOVSTA) & OC_BUF) >> 20); /* copy data */ top = y1 >> 16; left = (x1 >> 16) & ~1; npixels = ((((x2 + 0xffff) >> 16) + 1) & ~1) - left; switch (id) { case FOURCC_YV12: case FOURCC_I420: top &= ~1; nlines = ((((y2 + 0xffff) >> 16) + 1) & ~1) - top; I830CopyPlanarData(pScrn, pPriv, buf, srcPitch, srcPitch2, dstPitch, height, top, left, nlines, npixels, id); break; case FOURCC_UYVY: case FOURCC_YUY2: nlines = ((y2 + 0xffff) >> 16) - top; I830CopyPackedData(pScrn, pPriv, buf, srcPitch, dstPitch, top, left, nlines, npixels); break; #ifdef INTEL_XVMC case FOURCC_XVMC: if (pPriv->rotation != RR_Rotate_0) { top &= ~1; nlines = ((((y2 + 0xffff) >> 16) + 1) & ~1) - top; I830CopyPlanarData(pScrn, pPriv, buf, srcPitch, srcPitch2, dstPitch, height, top, left, nlines, npixels, id); } break; #endif default: break; } if (pDraw->type == DRAWABLE_WINDOW) { pPixmap = (*pScreen->GetWindowPixmap)((WindowPtr)pDraw); } else { pPixmap = (PixmapPtr)pDraw; } #ifdef I830_USE_EXA if (pPriv->textured && pI830->accel == ACCEL_EXA) { /* Force the pixmap into framebuffer so we can draw to it. */ exaMoveInPixmap(pPixmap); } #endif if (pPriv->textured && pI830->accel <= ACCEL_XAA && (((char *)pPixmap->devPrivate.ptr < (char *)pI830->FbBase) || ((char *)pPixmap->devPrivate.ptr >= (char *)pI830->FbBase + pI830->FbMapSize))) { /* If the pixmap wasn't in framebuffer, then we have no way in XAA to * force it there. So, we simply refuse to draw and fail. */ return BadAlloc; } if (!pPriv->textured) { i830_display_video(pScrn, crtc, destId, width, height, dstPitch, x1, y1, x2, y2, &dstBox, src_w, src_h, drw_w, drw_h); /* update cliplist */ if (!REGION_EQUAL(pScrn->pScreen, &pPriv->clip, clipBoxes)) { REGION_COPY(pScrn->pScreen, &pPriv->clip, clipBoxes); i830_fill_colorkey (pScreen, pPriv->colorKey, clipBoxes); } } else { Bool sync = TRUE; if (crtc == NULL) { sync = FALSE; } else if (pPriv->SyncToVblank == 0) { sync = FALSE; } if (sync) { BoxPtr box; int y1, y2; int event, pipe; I830CrtcPrivatePtr intel_crtc = crtc->driver_private; if (intel_crtc->pipe == 0) { event = MI_WAIT_FOR_PIPEA_SCAN_LINE_WINDOW; pipe = MI_LOAD_SCAN_LINES_DISPLAY_PIPEA; } else { event = MI_WAIT_FOR_PIPEB_SCAN_LINE_WINDOW; pipe = MI_LOAD_SCAN_LINES_DISPLAY_PIPEB; } box = REGION_EXTENTS(unused, clipBoxes); y1 = box->y1 - crtc->y; y2 = box->y2 - crtc->y; BEGIN_BATCH(5); /* The documentation says that the LOAD_SCAN_LINES command * always comes in pairs. Don't ask me why. */ OUT_BATCH(MI_LOAD_SCAN_LINES_INCL | pipe); OUT_BATCH((y1 << 16) | y2); OUT_BATCH(MI_LOAD_SCAN_LINES_INCL | pipe); OUT_BATCH((y1 << 16) | y2); OUT_BATCH(MI_WAIT_FOR_EVENT | event); ADVANCE_BATCH(); } if (IS_I965G(pI830)) { #ifdef INTEL_XVMC if (id == FOURCC_XVMC && pPriv->rotation == RR_Rotate_0) { pPriv->YBuf0offset = buf - pI830->FbBase; pPriv->UBuf0offset = pPriv->YBuf0offset + height*width; pPriv->VBuf0offset = pPriv->UBuf0offset + height*width/4; } #endif I965DisplayVideoTextured(pScrn, pPriv, destId, clipBoxes, width, height, dstPitch, x1, y1, x2, y2, src_w, src_h, drw_w, drw_h, pPixmap); } else { I915DisplayVideoTextured(pScrn, pPriv, destId, clipBoxes, width, height, dstPitch, dstPitch2, x1, y1, x2, y2, src_w, src_h, drw_w, drw_h, pPixmap); } } if (pPriv->textured) { DamageDamageRegion(pDraw, clipBoxes); } pPriv->videoStatus = CLIENT_VIDEO_ON; return Success; } static int I830QueryImageAttributes(ScrnInfoPtr pScrn, int id, unsigned short *w, unsigned short *h, int *pitches, int *offsets, Bool textured) { I830Ptr pI830 = I830PTR(pScrn); int size, tmp; #if 0 ErrorF("I830QueryImageAttributes: w is %d, h is %d\n", *w, *h); #endif if (IS_845G(pI830) || IS_I830(pI830)) { if (*w > IMAGE_MAX_WIDTH_LEGACY) *w = IMAGE_MAX_WIDTH_LEGACY; if (*h > IMAGE_MAX_HEIGHT_LEGACY) *h = IMAGE_MAX_HEIGHT_LEGACY; } else { if (*w > IMAGE_MAX_WIDTH) *w = IMAGE_MAX_WIDTH; if (*h > IMAGE_MAX_HEIGHT) *h = IMAGE_MAX_HEIGHT; } *w = (*w + 1) & ~1; if (offsets) offsets[0] = 0; switch (id) { /* IA44 is for XvMC only */ case FOURCC_IA44: case FOURCC_AI44: if (pitches) pitches[0] = *w; size = *w * *h; break; case FOURCC_YV12: case FOURCC_I420: *h = (*h + 1) & ~1; size = (*w + 3) & ~3; if (pitches) pitches[0] = size; size *= *h; if (offsets) offsets[1] = size; tmp = ((*w >> 1) + 3) & ~3; if (pitches) pitches[1] = pitches[2] = tmp; tmp *= (*h >> 1); size += tmp; if (offsets) offsets[2] = size; size += tmp; #if 0 if (pitches) ErrorF("pitch 0 is %d, pitch 1 is %d, pitch 2 is %d\n", pitches[0], pitches[1], pitches[2]); if (offsets) ErrorF("offset 1 is %d, offset 2 is %d\n", offsets[1], offsets[2]); if (offsets) ErrorF("size is %d\n", size); #endif break; #ifdef INTEL_XVMC case FOURCC_XVMC: *h = (*h + 1) & ~1; size = sizeof(struct intel_xvmc_command); if (pitches) pitches[0] = size; break; #endif case FOURCC_UYVY: case FOURCC_YUY2: default: size = *w << 1; if (pitches) pitches[0] = size; size *= *h; break; } return size; } static int I830QueryImageAttributesOverlay(ScrnInfoPtr pScrn, int id, unsigned short *w, unsigned short *h, int *pitches, int *offsets) { return I830QueryImageAttributes(pScrn, id, w, h, pitches, offsets, FALSE); } static int I830QueryImageAttributesTextured(ScrnInfoPtr pScrn, int id, unsigned short *w, unsigned short *h, int *pitches, int *offsets) { return I830QueryImageAttributes(pScrn, id, w, h, pitches, offsets, TRUE); } void I830VideoBlockHandler(int i, pointer blockData, pointer pTimeout, pointer pReadmask) { ScrnInfoPtr pScrn = xf86Screens[i]; I830Ptr pI830 = I830PTR(pScrn); I830PortPrivPtr pPriv; /* no overlay */ if (pI830->adaptor == NULL) return; pPriv = GET_PORT_PRIVATE(pScrn); if (pPriv->videoStatus & TIMER_MASK) { #if 1 Time now = currentTime.milliseconds; #else UpdateCurrentTime(); #endif if (pPriv->videoStatus & OFF_TIMER) { if (pPriv->offTime < now) { /* Turn off the overlay */ OVERLAY_DEBUG("BLOCKHANDLER\n"); i830_overlay_off (pScrn); pPriv->videoStatus = FREE_TIMER; pPriv->freeTime = now + FREE_DELAY; } } else { /* FREE_TIMER */ if (pPriv->freeTime < now) { if (!pPriv->textured) drm_intel_bo_unpin(pPriv->buf); drm_intel_bo_unreference(pPriv->buf); pPriv->buf = NULL; pPriv->videoStatus = 0; } } } } /*************************************************************************** * Offscreen Images ***************************************************************************/ typedef struct { Bool isOn; } OffscreenPrivRec, *OffscreenPrivPtr; static int I830AllocateSurface(ScrnInfoPtr pScrn, int id, unsigned short w, unsigned short h, XF86SurfacePtr surface) { int pitch, fbpitch, size; OffscreenPrivPtr pPriv; I830Ptr pI830 = I830PTR(pScrn); OVERLAY_DEBUG("I830AllocateSurface\n"); if (IS_845G(pI830) || IS_I830(pI830)) { if ((w > IMAGE_MAX_WIDTH_LEGACY) || (h > IMAGE_MAX_HEIGHT_LEGACY)) return BadAlloc; } else { if ((w > IMAGE_MAX_WIDTH) || (h > IMAGE_MAX_HEIGHT)) return BadAlloc; } /* What to do when rotated ?? */ if (pI830->rotation != RR_Rotate_0) return BadAlloc; if (!(surface->pitches = xalloc(sizeof(int)))) return BadAlloc; if (!(surface->offsets = xalloc(sizeof(int)))) { xfree(surface->pitches); return BadAlloc; } if (!(pPriv = xalloc(sizeof(OffscreenPrivRec)))) { xfree(surface->pitches); xfree(surface->offsets); return BadAlloc; } w = (w + 1) & ~1; pitch = ((w << 1) + 15) & ~15; fbpitch = pI830->cpp * pScrn->displayWidth; size = pitch * h; surface->width = w; surface->height = h; pPriv->isOn = FALSE; surface->pScrn = pScrn; surface->id = id; surface->pitches[0] = pitch; surface->offsets[0] = 0; surface->devPrivate.ptr = (pointer) pPriv; return Success; } static int I830StopSurface(XF86SurfacePtr surface) { OffscreenPrivPtr pPriv = (OffscreenPrivPtr) surface->devPrivate.ptr; ScrnInfoPtr pScrn = surface->pScrn; if (pPriv->isOn) { OVERLAY_DEBUG("StopSurface\n"); i830_overlay_off (pScrn); pPriv->isOn = FALSE; } return Success; } static int I830FreeSurface(XF86SurfacePtr surface) { I830StopSurface(surface); xfree(surface->pitches); xfree(surface->offsets); xfree(surface->devPrivate.ptr); return Success; } static int I830GetSurfaceAttribute(ScrnInfoPtr pScrn, Atom attribute, INT32 * value) { return I830GetPortAttribute(pScrn, attribute, value, NULL); } static int I830SetSurfaceAttribute(ScrnInfoPtr pScrn, Atom attribute, INT32 value) { return I830SetPortAttribute(pScrn, attribute, value, NULL); } static int I830DisplaySurface(XF86SurfacePtr surface, short src_x, short src_y, short drw_x, short drw_y, short src_w, short src_h, short drw_w, short drw_h, RegionPtr clipBoxes) { OffscreenPrivPtr pPriv = (OffscreenPrivPtr) surface->devPrivate.ptr; ScrnInfoPtr pScrn = surface->pScrn; ScreenPtr pScreen = screenInfo.screens[pScrn->scrnIndex]; I830Ptr pI830 = I830PTR(pScrn); I830PortPrivPtr pI830Priv = GET_PORT_PRIVATE(pScrn); INT32 x1, y1, x2, y2; BoxRec dstBox; xf86CrtcPtr crtc; OVERLAY_DEBUG("I830DisplaySurface\n"); x1 = src_x; x2 = src_x + src_w; y1 = src_y; y2 = src_y + src_h; dstBox.x1 = drw_x; dstBox.x2 = drw_x + drw_w; dstBox.y1 = drw_y; dstBox.y2 = drw_y + drw_h; if (!i830_clip_video_helper (pScrn, pI830Priv, &crtc, &dstBox, &x1, &x2, &y1, &y2, clipBoxes, surface->width, surface->height)) return Success; /* fixup pointers */ pI830Priv->YBuf0offset = surface->offsets[0]; pI830Priv->YBuf1offset = pI830Priv->YBuf0offset; /* Pick the idle buffer */ if (!pI830Priv->textured && pI830->overlayOn && pI830Priv->doubleBuffer) pI830Priv->currentBuf = !((INREG(DOVSTA) & OC_BUF) >> 20); i830_display_video(pScrn, crtc, surface->id, surface->width, surface->height, surface->pitches[0], x1, y1, x2, y2, &dstBox, src_w, src_h, drw_w, drw_h); i830_fill_colorkey (pScreen, pI830Priv->colorKey, clipBoxes); pPriv->isOn = TRUE; /* we've prempted the XvImage stream so set its free timer */ if (pI830Priv->videoStatus & CLIENT_VIDEO_ON) { REGION_EMPTY(pScrn->pScreen, &pI830Priv->clip); UpdateCurrentTime(); pI830Priv->videoStatus = FREE_TIMER; pI830Priv->freeTime = currentTime.milliseconds + FREE_DELAY; } return Success; } static void I830InitOffscreenImages(ScreenPtr pScreen) { XF86OffscreenImagePtr offscreenImages; ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; I830Ptr pI830 = I830PTR(pScrn); /* need to free this someplace */ if (!(offscreenImages = xalloc(sizeof(XF86OffscreenImageRec)))) { return; } offscreenImages[0].image = &Images[0]; offscreenImages[0].flags = VIDEO_OVERLAID_IMAGES /*| VIDEO_CLIP_TO_VIEWPORT*/; offscreenImages[0].alloc_surface = I830AllocateSurface; offscreenImages[0].free_surface = I830FreeSurface; offscreenImages[0].display = I830DisplaySurface; offscreenImages[0].stop = I830StopSurface; offscreenImages[0].setAttribute = I830SetSurfaceAttribute; offscreenImages[0].getAttribute = I830GetSurfaceAttribute; if (IS_845G(pI830) || IS_I830(pI830)) { offscreenImages[0].max_width = IMAGE_MAX_WIDTH_LEGACY; offscreenImages[0].max_height = IMAGE_MAX_HEIGHT_LEGACY; } else { offscreenImages[0].max_width = IMAGE_MAX_WIDTH; offscreenImages[0].max_height = IMAGE_MAX_HEIGHT; } offscreenImages[0].num_attributes = 1; offscreenImages[0].attributes = Attributes; xf86XVRegisterOffscreenImages(pScreen, offscreenImages, 1); } void i830_crtc_dpms_video(xf86CrtcPtr crtc, Bool on) { ScrnInfoPtr pScrn = crtc->scrn; I830Ptr pI830 = I830PTR(pScrn); I830PortPrivPtr pPriv; /* no overlay */ if (pI830->adaptor == NULL) return; pPriv = GET_PORT_PRIVATE(pScrn); if (crtc != pPriv->current_crtc) return; /* Check if it's the crtc the overlay is off */ if (!on) { /* We stop the video when mode switching, so we don't lock up * the engine. The overlayOK will determine whether we can re-enable * with the current video on completion of the mode switch. */ I830StopVideo(pScrn, pPriv, TRUE); pPriv->current_crtc = NULL; pPriv->overlayOK = FALSE; pPriv->oneLineMode = FALSE; } }