/* -*- c-basic-offset: 4 -*- */ /************************************************************************** Copyright © 2006 Dave Airlie All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sub license, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. **************************************************************************/ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "xf86.h" #include "xf86_OSproc.h" #include "xf86Resources.h" #include "compiler.h" #include "miscstruct.h" #include "xf86i2c.h" #include "i830_xf86Crtc.h" #define DPMS_SERVER #include #include "../i2c_vid.h" #include "sil164.h" #include "sil164_reg.h" static Bool sil164ReadByte(SIL164Ptr sil, int addr, CARD8 *ch) { if (!xf86I2CReadByte(&(sil->d), addr, ch)) { xf86DrvMsg(sil->d.pI2CBus->scrnIndex, X_ERROR, "Unable to read from %s Slave %d.\n", sil->d.pI2CBus->BusName, sil->d.SlaveAddr); return FALSE; } return TRUE; } static Bool sil164WriteByte(SIL164Ptr sil, int addr, CARD8 ch) { if (!xf86I2CWriteByte(&(sil->d), addr, ch)) { xf86DrvMsg(sil->d.pI2CBus->scrnIndex, X_ERROR, "Unable to write to %s Slave %d.\n", sil->d.pI2CBus->BusName, sil->d.SlaveAddr); return FALSE; } return TRUE; } /* Silicon Image 164 driver for chip on i2c bus */ static void * sil164_init(I2CBusPtr b, I2CSlaveAddr addr) { /* this will detect the SIL164 chip on the specified i2c bus */ SIL164Ptr sil; unsigned char ch; xf86DrvMsg(b->scrnIndex, X_ERROR, "detecting sil164\n"); sil = xcalloc(1, sizeof(SIL164Rec)); if (sil == NULL) return NULL; sil->d.DevName = "SIL164 TMDS Controller"; sil->d.SlaveAddr = addr; sil->d.pI2CBus = b; sil->d.StartTimeout = b->StartTimeout; sil->d.BitTimeout = b->BitTimeout; sil->d.AcknTimeout = b->AcknTimeout; sil->d.ByteTimeout = b->ByteTimeout; sil->d.DriverPrivate.ptr = sil; if (!sil164ReadByte(sil, SIL164_VID_LO, &ch)) goto out; if (ch!=(SIL164_VID & 0xFF)) { xf86DrvMsg(sil->d.pI2CBus->scrnIndex, X_ERROR, "sil164 not detected got %d: from %s Slave %d.\n", ch, sil->d.pI2CBus->BusName, sil->d.SlaveAddr); goto out; } if (!sil164ReadByte(sil, SIL164_DID_LO, &ch)) goto out; if (ch!=(SIL164_DID & 0xFF)) { xf86DrvMsg(sil->d.pI2CBus->scrnIndex, X_ERROR, "sil164 not detected got %d: from %s Slave %d.\n", ch, sil->d.pI2CBus->BusName, sil->d.SlaveAddr); goto out; } if (!xf86I2CDevInit(&(sil->d))) { goto out; } return sil; out: xfree(sil); return NULL; } static xf86OutputStatus sil164_detect(I2CDevPtr d) { SIL164Ptr sil = SILPTR(d); CARD8 reg9; sil164ReadByte(sil, SIL164_REG9, ®9); if (reg9 & SIL164_9_HTPLG) return XF86OutputStatusConnected; else return XF86OutputStatusDisconnected; } static ModeStatus sil164_mode_valid(I2CDevPtr d, DisplayModePtr mode) { return MODE_OK; } static void sil164_mode_set(I2CDevPtr d, DisplayModePtr mode) { /* As long as the basics are set up, since we don't have clock dependencies * in the mode setup, we can just leave the registers alone and everything * will work fine. */ /* recommended programming sequence from doc */ /*sil164WriteByte(sil, 0x08, 0x30); sil164WriteByte(sil, 0x09, 0x00); sil164WriteByte(sil, 0x0a, 0x90); sil164WriteByte(sil, 0x0c, 0x89); sil164WriteByte(sil, 0x08, 0x31);*/ /* don't do much */ return; } /* set the SIL164 power state */ static void sil164_dpms(I2CDevPtr d, int mode) { SIL164Ptr sil = SILPTR(d); int ret; unsigned char ch; ret = sil164ReadByte(sil, SIL164_REG8, &ch); if (ret == FALSE) return; if (mode == DPMSModeOn) ch |= SIL164_8_PD; else ch &= ~SIL164_8_PD; sil164WriteByte(sil, SIL164_REG8, ch); return; } static void sil164_dump_regs(I2CDevPtr d) { SIL164Ptr sil = SILPTR(d); CARD8 val; sil164ReadByte(sil, SIL164_FREQ_LO, &val); xf86DrvMsg(sil->d.pI2CBus->scrnIndex, X_INFO, "SIL164_FREQ_LO: 0x%02x\n", val); sil164ReadByte(sil, SIL164_FREQ_HI, &val); xf86DrvMsg(sil->d.pI2CBus->scrnIndex, X_INFO, "SIL164_FREQ_HI: 0x%02x\n", val); sil164ReadByte(sil, SIL164_REG8, &val); xf86DrvMsg(sil->d.pI2CBus->scrnIndex, X_INFO, "SIL164_REG8: 0x%02x\n", val); sil164ReadByte(sil, SIL164_REG9, &val); xf86DrvMsg(sil->d.pI2CBus->scrnIndex, X_INFO, "SIL164_REG9: 0x%02x\n", val); sil164ReadByte(sil, SIL164_REGC, &val); xf86DrvMsg(sil->d.pI2CBus->scrnIndex, X_INFO, "SIL164_REGC: 0x%02x\n", val); } static void sil164_save(I2CDevPtr d) { SIL164Ptr sil = SILPTR(d); if (!sil164ReadByte(sil, SIL164_REG8, &sil->SavedReg.reg8)) return; if (!sil164ReadByte(sil, SIL164_REG9, &sil->SavedReg.reg9)) return; if (!sil164ReadByte(sil, SIL164_REGC, &sil->SavedReg.regc)) return; return; } static void sil164_restore(I2CDevPtr d) { SIL164Ptr sil = SILPTR(d); /* Restore it powered down initially */ sil164WriteByte(sil, SIL164_REG8, sil->SavedReg.reg8 & ~0x1); sil164WriteByte(sil, SIL164_REG9, sil->SavedReg.reg9); sil164WriteByte(sil, SIL164_REGC, sil->SavedReg.regc); sil164WriteByte(sil, SIL164_REG8, sil->SavedReg.reg8); } I830I2CVidOutputRec SIL164VidOutput = { .init = sil164_init, .detect = sil164_detect, .mode_valid = sil164_mode_valid, .mode_set = sil164_mode_set, .dpms = sil164_dpms, .dump_regs = sil164_dump_regs, .save = sil164_save, .restore = sil164_restore, };