[mach64] Consolidate adjustments of mode timings, part 3.

Cosmetic.

1 files changed, 25 insertions, 26 deletions

diff --git a/src/atimach64.c b/src/atimach64.c
index e740003..c7b0ecc 100644
--- a/src/atimach64.c
+++ b/src/atimach64.c
@@ -82,12 +82,6 @@ ATIMach64PreInit
     ATIHWPtr    pATIHW
 )
 {
-    CARD32 bus_cntl, config_cntl;
-
-    {
-        pATIHW->crtc_off_pitch = SetBits(pATI->displayWidth >> 3, CRTC_PITCH);
-    }
-
     if ((pATI->LockData.crtc_gen_cntl & CRTC_CSYNC_EN) && !pATI->OptionCSync)
     {
         xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE,
@@ -95,7 +89,7 @@ ATIMach64PreInit
         pATI->OptionCSync = TRUE;
     }
 
-    pATIHW->bus_cntl = bus_cntl = inr(BUS_CNTL);
+    pATIHW->bus_cntl = inr(BUS_CNTL);
     if (pATI->Chip < ATI_CHIP_264VT4)
         pATIHW->bus_cntl = (pATIHW->bus_cntl & ~BUS_HOST_ERR_INT_EN) |
             BUS_HOST_ERR_INT;
@@ -142,7 +136,7 @@ ATIMach64PreInit
     if (pATI->DAC == ATI_DAC_IBMRGB514)
         pATIHW->gen_test_cntl |= GEN_OVR_OUTPUT_EN;
 
-    pATIHW->config_cntl = config_cntl = inr(CONFIG_CNTL);
+    pATIHW->config_cntl = inr(CONFIG_CNTL);
 
 #ifndef AVOID_CPIO
 
@@ -212,6 +206,9 @@ ATIMach64PreInit
     /* Draw engine setup */
     if (pATI->Block0Base)
     {
+        CARD32 bus_cntl = inr(BUS_CNTL);
+        CARD32 config_cntl = inr(CONFIG_CNTL);
+
         /* Ensure apertures are enabled */
         outr(BUS_CNTL, pATIHW->bus_cntl);
         outr(CONFIG_CNTL, pATIHW->config_cntl);
@@ -595,27 +592,27 @@ ATIMach64ModeAdjust
     int VDisplay;
 
     /* Clobber mode timings */
-    if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0) &&
-        !pMode->CrtcHAdjusted && !pMode->CrtcVAdjusted &&
-        (!pATI->OptionLCDSync || (pMode->type & M_T_BUILTIN)))
+    if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0))
     {
+        if (!pMode->CrtcHAdjusted && !pMode->CrtcVAdjusted &&
+            (!pATI->OptionLCDSync || (pMode->type & M_T_BUILTIN)))
+        {
         int VScan;
 
         pMode->Clock = pATI->LCDClock;
         pMode->Flags &= ~(V_DBLSCAN | V_INTERLACE | V_CLKDIV2);
 
+        pMode->VScan = 0;
+
         /*
          * Use doublescanning or multiscanning to get around vertical blending
          * limitations.
          */
         VScan = pATI->LCDVertical / pMode->VDisplay;
+        if (VScan > 1)
         {
-                pMode->VScan = 0;
-                if (VScan > 1)
-                {
-                VScan = 2;
-                pMode->Flags |= V_DBLSCAN;
-                }
+            VScan = 2;
+            pMode->Flags |= V_DBLSCAN;
         }
 
         pMode->HSyncStart = pMode->HDisplay + pATI->LCDHSyncStart;
@@ -628,6 +625,7 @@ ATIMach64ModeAdjust
             ATIDivide(pATI->LCDVSyncWidth, VScan, 0, 1);
         pMode->VTotal = pMode->VDisplay +
             ATIDivide(pATI->LCDVBlankWidth, VScan, 0, 0);
+        }
     }
 
     /* If not already done adjust horizontal timings */
@@ -731,27 +729,28 @@ ATIMach64Calculate
     /* Build register contents */
     pATIHW->crtc_h_total_disp =
         SetBits(pMode->CrtcHTotal, CRTC_H_TOTAL) |
-            SetBits(pMode->CrtcHDisplay, CRTC_H_DISP);
+        SetBits(pMode->CrtcHDisplay, CRTC_H_DISP);
+
     pATIHW->crtc_h_sync_strt_wid =
         SetBits(pMode->CrtcHSyncStart, CRTC_H_SYNC_STRT) |
-            SetBits(pMode->CrtcHSkew, CRTC_H_SYNC_DLY) |         /* ? */
-            SetBits(GetBits(pMode->CrtcHSyncStart, 0x0100U),
-                CRTC_H_SYNC_STRT_HI) |
-            SetBits(pMode->CrtcHSyncEnd - pMode->CrtcHSyncStart,
-                CRTC_H_SYNC_WID);
+        SetBits(pMode->CrtcHSkew, CRTC_H_SYNC_DLY) |         /* ? */
+        SetBits(GetBits(pMode->CrtcHSyncStart, 0x0100U), CRTC_H_SYNC_STRT_HI) |
+        SetBits(pMode->CrtcHSyncEnd - pMode->CrtcHSyncStart, CRTC_H_SYNC_WID);
     if (pMode->Flags & V_NHSYNC)
         pATIHW->crtc_h_sync_strt_wid |= CRTC_H_SYNC_POL;
 
     pATIHW->crtc_v_total_disp =
         SetBits(pMode->CrtcVTotal, CRTC_V_TOTAL) |
-            SetBits(pMode->CrtcVDisplay, CRTC_V_DISP);
+        SetBits(pMode->CrtcVDisplay, CRTC_V_DISP);
+
     pATIHW->crtc_v_sync_strt_wid =
         SetBits(pMode->CrtcVSyncStart, CRTC_V_SYNC_STRT) |
-            SetBits(pMode->CrtcVSyncEnd - pMode->CrtcVSyncStart,
-                CRTC_V_SYNC_WID);
+        SetBits(pMode->CrtcVSyncEnd - pMode->CrtcVSyncStart, CRTC_V_SYNC_WID);
     if (pMode->Flags & V_NVSYNC)
         pATIHW->crtc_v_sync_strt_wid |= CRTC_V_SYNC_POL;
 
+    pATIHW->crtc_off_pitch = SetBits(pATI->displayWidth >> 3, CRTC_PITCH);
+
     pATIHW->crtc_gen_cntl = inr(CRTC_GEN_CNTL) &
         ~(CRTC_DBL_SCAN_EN | CRTC_INTERLACE_EN |
           CRTC_HSYNC_DIS | CRTC_VSYNC_DIS | CRTC_CSYNC_EN |