diff options
| -rw-r--r-- | src/atimach64.c | 3 | ||||
| -rw-r--r-- | src/atimach64accel.c | 24 | ||||
| -rw-r--r-- | src/atiregs.h | 13 | ||||
| -rw-r--r-- | src/atistruct.h | 2 |
4 files changed, 37 insertions, 5 deletions
diff --git a/src/atimach64.c b/src/atimach64.c index 166aaf0..2cdec78 100644 --- a/src/atimach64.c +++ b/src/atimach64.c @@ -183,6 +183,7 @@ ATIMach64PreInit if (pATI->Chip >= ATI_CHIP_264VTB) { + pATIHW->mem_buf_cntl = inr(MEM_BUF_CNTL) | INVALIDATE_RB_CACHE; pATIHW->mem_cntl = (pATI->LockData.mem_cntl & ~(CTL_MEM_LOWER_APER_ENDIAN | CTL_MEM_UPPER_APER_ENDIAN)) | SetBits(CTL_MEM_APER_BYTE_ENDIAN, CTL_MEM_LOWER_APER_ENDIAN); @@ -424,6 +425,7 @@ ATIMach64Save if (pATI->Chip >= ATI_CHIP_264VTB) { + pATIHW->mem_buf_cntl = inr(MEM_BUF_CNTL) | INVALIDATE_RB_CACHE; pATIHW->mem_cntl = inr(MEM_CNTL); pATIHW->mpp_config = inr(MPP_CONFIG); pATIHW->mpp_strobe_seq = inr(MPP_STROBE_SEQ); @@ -1057,6 +1059,7 @@ ATIMach64Set if (pATI->Chip >= ATI_CHIP_264VTB) { + outr(MEM_BUF_CNTL, pATIHW->mem_buf_cntl); outr(MEM_CNTL, pATIHW->mem_cntl); outr(MPP_CONFIG, pATIHW->mpp_config); outr(MPP_STROBE_SEQ, pATIHW->mpp_strobe_seq); diff --git a/src/atimach64accel.c b/src/atimach64accel.c index 932c8c1..a0a9e17 100644 --- a/src/atimach64accel.c +++ b/src/atimach64accel.c @@ -245,16 +245,32 @@ ATIMach64Sync } } + if (pATI->pXAAInfo) + pATI->pXAAInfo->NeedToSync = FALSE; + + if (pATI->Chip >= ATI_CHIP_264VTB) + { + /* + * Flush the read-back cache (by turning on INVALIDATE_RB_CACHE), + * otherwise the host might get stale data when reading through the + * aperture. + */ + outr(MEM_BUF_CNTL, pATI->NewHW.mem_buf_cntl); + } + /* + * Note: + * Before actually invalidating the read-back cache, the mach64 driver + * was using the trick below which is buggy. The code is left here for + * reference, DRI uses this trick and needs updating. + * * For VTB's and later, the first CPU read of the framebuffer will return * zeroes, so do it here. This appears to be due to some kind of engine * caching of framebuffer data I haven't found any way of disabling, or * otherwise circumventing. Thanks to Mark Vojkovich for the suggestion. + * + * pATI = *(volatile ATIPtr *)pATI->pMemory; */ - if (pATI->pXAAInfo) - pATI->pXAAInfo->NeedToSync = FALSE; - - pATI = *(volatile ATIPtr *)pATI->pMemory; } static __inline__ void diff --git a/src/atiregs.h b/src/atiregs.h index f9730c7..102347b 100644 --- a/src/atiregs.h +++ b/src/atiregs.h @@ -692,6 +692,19 @@ /* ? 0xf8000000ul */ #define TIMER_CONFIG BlockIOTag(0x0au) /* VTB/GTB/LT */ #define MEM_BUF_CNTL BlockIOTag(0x0bu) /* VTB/GTB/LT */ +#define Z_WB_FLUSH 0x00000007ul +#define Z_WB_FLUSH_P 0x0000000ful /* GTPro */ +#define VID_WB_FLUSH_P 0x000000f0ul /* GTPro */ +#define VID_WB_FLUSH_MSB 0x00000100ul +#define GUI_WB_FLUSH_P 0x00001f00ul /* GTPro */ +#define HST_WB_FLUSH_P 0x0000e000ul /* GTPro */ +#define SCL_MIN_BURST_LEN 0x001f0000ul +#define SCL_THRESH 0x003f0000ul /* GTPro */ +/* ? 0x00400000ul */ +#define INVALIDATE_RB_CACHE 0x00800000ul +#define HST_WB_FLUSH 0x03000000ul +#define VID_WB_FLUSH 0x1c000000ul +#define GUI_WB_FLUSH 0xe0000000ul #define SHARED_CNTL BlockIOTag(0x0cu) /* VTB/GTB/LT */ #define SHARED_MEM_CONFIG BlockIOTag(0x0du) /* VTB/GTB/LT */ #define MEM_ADDR_CONFIG BlockIOTag(0x0du) /* GTPro */ diff --git a/src/atistruct.h b/src/atistruct.h index 0aa37b5..0201042 100644 --- a/src/atistruct.h +++ b/src/atistruct.h @@ -110,7 +110,7 @@ typedef struct _ATIHWRec /* Mach64 CPIO registers */ CARD32 crtc_h_total_disp, crtc_h_sync_strt_wid, crtc_v_total_disp, crtc_v_sync_strt_wid, - crtc_off_pitch, crtc_gen_cntl, dsp_config, dsp_on_off, + crtc_off_pitch, crtc_gen_cntl, dsp_config, dsp_on_off, mem_buf_cntl, ovr_clr, ovr_wid_left_right, ovr_wid_top_bottom, cur_clr0, cur_clr1, cur_offset, cur_horz_vert_posn, cur_horz_vert_off, |