From 16fcf9437fb0dc6ae3aba73a77492f2de0fda991 Mon Sep 17 00:00:00 2001 From: Alan Coopersmith Date: Sun, 12 May 2024 11:58:18 -0700 Subject: Remove XAA support Mostly done via unifdef -UUSE_XAA, followed by minor manual editing Since recent commits require xserver-1.18.0 or later to build against, there's no reason leaving behind big chunks of code that can only build against the XAA support removed in xserver-1.13.0 (released in 2012). Signed-off-by: Alan Coopersmith Part-of: --- src/aticonfig.c | 17 +- src/atidga.c | 133 ---------- src/atidri.c | 294 ---------------------- src/atiload.c | 10 - src/atimach64.c | 14 -- src/atimach64accel.c | 669 --------------------------------------------------- src/atimach64accel.h | 7 - src/atimach64io.h | 14 +- src/atimach64xv.c | 107 -------- src/atiscreen.c | 279 --------------------- src/atistruct.h | 27 +-- 11 files changed, 5 insertions(+), 1566 deletions(-) (limited to 'src') diff --git a/src/aticonfig.c b/src/aticonfig.c index 3f5f141..15b7fb3 100644 --- a/src/aticonfig.c +++ b/src/aticonfig.c @@ -481,26 +481,11 @@ ATIProcessOptions { MessageType from = X_DEFAULT; #if defined(USE_EXA) -#if defined(USE_XAA) - if (AccelMethod != NULL) - { - from = X_CONFIG; - if (xf86NameCmp(AccelMethod, "EXA") == 0) - pATI->useEXA = TRUE; - } -#else /* USE_XAA */ pATI->useEXA = TRUE; -#endif /* !USE_XAA */ #endif /* USE_EXA */ xf86DrvMsg(pScreenInfo->scrnIndex, from, "Using %s acceleration architecture\n", - pATI->useEXA ? "EXA" : -#if defined(USE_XAA) - "XAA" -#else - "no" -#endif - ); + pATI->useEXA ? "EXA" : "no"); #if defined(USE_EXA) if (pATI->useEXA && pATI->Chip >= ATI_CHIP_264GTPRO) diff --git a/src/atidga.c b/src/atidga.c index 166fd26..75b0c79 100644 --- a/src/atidga.c +++ b/src/atidga.c @@ -167,113 +167,6 @@ ATIDGAGetViewport return 0; /* There are never any pending requests */ } -#ifdef USE_XAA -/* - * ATIDGAFillRect -- - * - * This function calls XAA solid fill primitives to fill a rectangle. - */ -static void -ATIDGAFillRect -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int w, - int h, - unsigned long colour -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); -/*FIXME : use EXA if available */ -#ifdef USE_XAA - XAAInfoRecPtr pXAAInfo = pATI->pXAAInfo; - - (*pXAAInfo->SetupForSolidFill)(pScreenInfo, (int)colour, GXcopy, - (CARD32)(~0)); - (*pXAAInfo->SubsequentSolidFillRect)(pScreenInfo, x, y, w, h); - - if (pScreenInfo->bitsPerPixel == pATI->bitsPerPixel) - SET_SYNC_FLAG(pXAAInfo); -#endif -} - -/* - * ATIDGABlitRect -- - * - * This function calls XAA screen-to-screen copy primitives to copy a - * rectangle. - */ -static void -ATIDGABlitRect -( - ScrnInfoPtr pScreenInfo, - int xSrc, - int ySrc, - int w, - int h, - int xDst, - int yDst -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); -/*FIXME : use EXA if available */ -#ifdef USE_XAA - XAAInfoRecPtr pXAAInfo = pATI->pXAAInfo; - int xdir = ((xSrc < xDst) && (ySrc == yDst)) ? -1 : 1; - int ydir = (ySrc < yDst) ? -1 : 1; - - (*pXAAInfo->SetupForScreenToScreenCopy)(pScreenInfo, - xdir, ydir, GXcopy, (CARD32)(~0), -1); - (*pXAAInfo->SubsequentScreenToScreenCopy)(pScreenInfo, - xSrc, ySrc, xDst, yDst, w, h); - - if (pScreenInfo->bitsPerPixel == pATI->bitsPerPixel) - SET_SYNC_FLAG(pXAAInfo); -#endif -} - -/* - * ATIDGABlitTransRect -- - * - * This function calls XAA screen-to-screen copy primitives to transparently - * copy a rectangle. - */ -static void -ATIDGABlitTransRect -( - ScrnInfoPtr pScreenInfo, - int xSrc, - int ySrc, - int w, - int h, - int xDst, - int yDst, - unsigned long colour -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); -/*FIXME : use EXA if available */ -#ifdef USE_XAA - XAAInfoRecPtr pXAAInfo = pATI->pXAAInfo; - int xdir = ((xSrc < xDst) && (ySrc == yDst)) ? -1 : 1; - int ydir = (ySrc < yDst) ? -1 : 1; - - pATI->XAAForceTransBlit = TRUE; - - (*pXAAInfo->SetupForScreenToScreenCopy)(pScreenInfo, - xdir, ydir, GXcopy, (CARD32)(~0), (int)colour); - - pATI->XAAForceTransBlit = FALSE; - - (*pXAAInfo->SubsequentScreenToScreenCopy)(pScreenInfo, - xSrc, ySrc, xDst, yDst, w, h); - - if (pScreenInfo->bitsPerPixel == pATI->bitsPerPixel) - SET_SYNC_FLAG(pXAAInfo); -#endif -} -#endif /* USE_XAA */ /* * ATIDGAAddModes -- @@ -342,10 +235,6 @@ ATIDGAAddModes pDGAMode->flags |= DGA_PIXMAP_AVAILABLE; pDGAMode->address = pATI->pMemory; -#ifdef USE_XAA - if (pATI->pXAAInfo) - pDGAMode->flags &= ~DGA_CONCURRENT_ACCESS; -#endif } if ((pMode->Flags & V_DBLSCAN) || (pMode->VScan > 1)) pDGAMode->flags |= DGA_DOUBLESCAN; @@ -406,9 +295,6 @@ ATIDGAInit ATIPtr pATI ) { -#ifdef USE_XAA - XAAInfoRecPtr pXAAInfo; -#endif int flags; if (!pATI->nDGAMode) @@ -420,25 +306,6 @@ ATIDGAInit pATI->ATIDGAFunctions.GetViewport = ATIDGAGetViewport; flags = 0; -#ifdef USE_XAA - if ((pXAAInfo = pATI->pXAAInfo)) - { - pATI->ATIDGAFunctions.Sync = pXAAInfo->Sync; - if (pXAAInfo->SetupForSolidFill && - pXAAInfo->SubsequentSolidFillRect) - { - flags |= DGA_FILL_RECT; - pATI->ATIDGAFunctions.FillRect = ATIDGAFillRect; - } - if (pXAAInfo->SetupForScreenToScreenCopy && - pXAAInfo->SubsequentScreenToScreenCopy) - { - flags |= DGA_BLIT_RECT | DGA_BLIT_RECT_TRANS; - pATI->ATIDGAFunctions.BlitRect = ATIDGABlitRect; - pATI->ATIDGAFunctions.BlitTransRect = ATIDGABlitTransRect; - } - } -#endif if (!flags) flags = DGA_CONCURRENT_ACCESS; diff --git a/src/atidri.c b/src/atidri.c index 35cbb99..6fcb1f0 100644 --- a/src/atidri.c +++ b/src/atidri.c @@ -126,75 +126,6 @@ static void ATIDRISwapContext( ScreenPtr pScreen, } } -#ifdef USE_XAA -static void ATIDRITransitionTo2d(ScreenPtr pScreen) -{ - ScrnInfoPtr pScreenInfo = xf86ScreenToScrn(pScreen); - ATIPtr pATI = ATIPTR(pScreenInfo); - - if (pATI->backArea) { - xf86FreeOffscreenArea(pATI->backArea); - pATI->backArea = NULL; - } - if (pATI->depthTexArea) { - xf86FreeOffscreenArea(pATI->depthTexArea); - pATI->depthTexArea = NULL; - } - pATI->have3DWindows = FALSE; -} - -static void ATIDRITransitionTo3d(ScreenPtr pScreen) -{ - ScrnInfoPtr pScreenInfo = xf86ScreenToScrn(pScreen); - ATIPtr pATI = ATIPTR(pScreenInfo); - FBAreaPtr fbArea; - int width, height; - - xf86PurgeUnlockedOffscreenAreas(pScreen); - - xf86QueryLargestOffscreenArea(pScreen, &width, &height, 0, 0, 0); - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Largest offscreen area available: %d x %d\n", - width, height); - - fbArea = xf86AllocateOffscreenArea(pScreen, pScreenInfo->displayWidth, - height - pATI->depthTexLines - - pATI->backLines, - pScreenInfo->displayWidth, NULL, NULL, NULL); - - if (!fbArea) - xf86DrvMsg(pScreen->myNum, X_ERROR, "Unable to reserve placeholder " - "offscreen area, you might experience screen corruption\n"); - - if (!pATI->backArea) { - pATI->backArea = - xf86AllocateOffscreenArea(pScreen, pScreenInfo->displayWidth, - pATI->backLines, - pScreenInfo->displayWidth, - NULL, NULL, NULL); - } - if (!pATI->backArea) - xf86DrvMsg(pScreen->myNum, X_ERROR, "Unable to reserve offscreen area " - "for back buffer, you might experience screen corruption\n"); - - if (!pATI->depthTexArea) { - pATI->depthTexArea = - xf86AllocateOffscreenArea(pScreen, pScreenInfo->displayWidth, - pATI->depthTexLines, - pScreenInfo->displayWidth, - NULL, NULL, NULL); - } - if (!pATI->depthTexArea) - xf86DrvMsg(pScreen->myNum, X_ERROR, "Unable to reserve offscreen area " - "for depth buffer and textures, you might experience screen corruption\n"); - - if (fbArea) - xf86FreeOffscreenArea(fbArea); - - pATI->have3DWindows = TRUE; -} -#endif /* USE_XAA */ #ifdef USE_EXA static void ATIDRITransitionTo2d_EXA(ScreenPtr pScreen) @@ -232,59 +163,6 @@ static void ATIDRITransitionTo3d_EXA(ScreenPtr pScreen) /* Initialize the state of the back and depth buffers. */ static void ATIDRIInitBuffers( WindowPtr pWin, RegionPtr prgn, CARD32 indx ) { -#ifdef USE_XAA - ScreenPtr pScreen = pWin->drawable.pScreen; - ScrnInfoPtr pScreenInfo = xf86ScreenToScrn(pScreen); - ATIPtr pATI = ATIPTR(pScreenInfo); - ATIDRIServerInfoPtr pATIDRIServer = pATI->pDRIServerInfo; - XAAInfoRecPtr pXAAInfo = pATI->pXAAInfo; - BoxPtr pbox, pboxSave; - int nbox, nboxSave; - int depth; - - depth = 0x0000ffff; - - if (!pXAAInfo) - return; - - if (!pXAAInfo->SetupForSolidFill) - return; - - /* FIXME: Only initialize the back and depth buffers for contexts - that request them */ - - /* FIXME: Use drm clear? (see Radeon driver) */ - - pboxSave = pbox = REGION_RECTS(prgn); - nboxSave = nbox = REGION_NUM_RECTS(prgn); - - (*pXAAInfo->SetupForSolidFill)(pScreenInfo, 0, GXcopy, (CARD32)(-1)); - for (; nbox; nbox--, pbox++) { - (*pXAAInfo->SubsequentSolidFillRect)(pScreenInfo, - pbox->x1 + pATIDRIServer->fbX, - pbox->y1 + pATIDRIServer->fbY, - pbox->x2 - pbox->x1, - pbox->y2 - pbox->y1); - (*pXAAInfo->SubsequentSolidFillRect)(pScreenInfo, - pbox->x1 + pATIDRIServer->backX, - pbox->y1 + pATIDRIServer->backY, - pbox->x2 - pbox->x1, - pbox->y2 - pbox->y1); - } - - pbox = pboxSave; - nbox = nboxSave; - - (*pXAAInfo->SetupForSolidFill)(pScreenInfo, depth, GXcopy, (CARD32)(-1)); - for (; nbox; nbox--, pbox++) - (*pXAAInfo->SubsequentSolidFillRect)(pScreenInfo, - pbox->x1 + pATIDRIServer->depthX, - pbox->y1 + pATIDRIServer->depthY, - pbox->x2 - pbox->x1, - pbox->y2 - pbox->y1); - - ATIDRIMarkSyncInt(pScreenInfo); -#endif } /* Copy the back and depth buffers when the X server moves a window. @@ -299,172 +177,6 @@ static void ATIDRIInitBuffers( WindowPtr pWin, RegionPtr prgn, CARD32 indx ) static void ATIDRIMoveBuffers( WindowPtr pWin, DDXPointRec ptOldOrg, RegionPtr prgnSrc, CARD32 indx ) { -#ifdef USE_XAA - ScreenPtr pScreen = pWin->drawable.pScreen; - ScrnInfoPtr pScreenInfo = xf86ScreenToScrn(pScreen); - ATIPtr pATI = ATIPTR(pScreenInfo); - XAAInfoRecPtr pXAAInfo = pATI->pXAAInfo; - - int backOffsetPitch = (((pATI->pDRIServerInfo->backPitch/8) << 22) | - (pATI->pDRIServerInfo->backOffset >> 3)); -#if 0 - int depthOffsetPitch = (((pATI->pDRIServerInfo->depthPitch/8) << 22) | - (pATI->pDRIServerInfo->depthOffset >> 3)); -#endif - BoxPtr pboxTmp, pboxNext, pboxBase; - DDXPointPtr pptTmp; - int xdir, ydir; - - int screenwidth = pScreenInfo->virtualX; - int screenheight = pScreenInfo->virtualY; - - BoxPtr pbox = REGION_RECTS(prgnSrc); - int nbox = REGION_NUM_RECTS(prgnSrc); - - BoxPtr pboxNew1 = NULL; - BoxPtr pboxNew2 = NULL; - DDXPointPtr pptNew1 = NULL; - DDXPointPtr pptNew2 = NULL; - DDXPointPtr pptSrc = &ptOldOrg; - - int dx = pWin->drawable.x - ptOldOrg.x; - int dy = pWin->drawable.y - ptOldOrg.y; - - if (!pXAAInfo) - return; - - if (!pXAAInfo->SetupForScreenToScreenCopy) - return; - - /* FIXME: Only move the back and depth buffers for contexts - * that request them. - */ - - /* If the copy will overlap in Y, reverse the order */ - if (dy > 0) { - ydir = -1; - - if (nbox > 1) { - /* Keep ordering in each band, reverse order of bands */ - pboxNew1 = (BoxPtr)malloc(sizeof(BoxRec)*nbox); - if (!pboxNew1) return; - pptNew1 = (DDXPointPtr)malloc(sizeof(DDXPointRec)*nbox); - if (!pptNew1) { - free(pboxNew1); - return; - } - pboxBase = pboxNext = pbox+nbox-1; - while (pboxBase >= pbox) { - while ((pboxNext >= pbox) && (pboxBase->y1 == pboxNext->y1)) - pboxNext--; - pboxTmp = pboxNext+1; - pptTmp = pptSrc + (pboxTmp - pbox); - while (pboxTmp <= pboxBase) { - *pboxNew1++ = *pboxTmp++; - *pptNew1++ = *pptTmp++; - } - pboxBase = pboxNext; - } - pboxNew1 -= nbox; - pbox = pboxNew1; - pptNew1 -= nbox; - pptSrc = pptNew1; - } - } else { - /* No changes required */ - ydir = 1; - } - - /* If the regions will overlap in X, reverse the order */ - if (dx > 0) { - xdir = -1; - - if (nbox > 1) { - /* reverse order of rects in each band */ - pboxNew2 = (BoxPtr)malloc(sizeof(BoxRec)*nbox); - pptNew2 = (DDXPointPtr)malloc(sizeof(DDXPointRec)*nbox); - if (!pboxNew2 || !pptNew2) { - free(pptNew2); - free(pboxNew2); - free(pptNew1); - free(pboxNew1); - return; - } - pboxBase = pboxNext = pbox; - while (pboxBase < pbox+nbox) { - while ((pboxNext < pbox+nbox) - && (pboxNext->y1 == pboxBase->y1)) - pboxNext++; - pboxTmp = pboxNext; - pptTmp = pptSrc + (pboxTmp - pbox); - while (pboxTmp != pboxBase) { - *pboxNew2++ = *--pboxTmp; - *pptNew2++ = *--pptTmp; - } - pboxBase = pboxNext; - } - pboxNew2 -= nbox; - pbox = pboxNew2; - pptNew2 -= nbox; - pptSrc = pptNew2; - } - } else { - /* No changes are needed */ - xdir = 1; - } - - (*pXAAInfo->SetupForScreenToScreenCopy)(pScreenInfo, xdir, ydir, GXcopy, - (CARD32)(-1), -1); - - for (; nbox-- ; pbox++) { - int xa = pbox->x1; - int ya = pbox->y1; - int destx = xa + dx; - int desty = ya + dy; - int w = pbox->x2 - xa + 1; - int h = pbox->y2 - ya + 1; - - if (destx < 0) xa -= destx, w += destx, destx = 0; - if (desty < 0) ya -= desty, h += desty, desty = 0; - if (destx + w > screenwidth) w = screenwidth - destx; - if (desty + h > screenheight) h = screenheight - desty; - - if (w <= 0) continue; - if (h <= 0) continue; - - ATIMach64WaitForFIFO(pATI, 2); - outf(SRC_OFF_PITCH, backOffsetPitch); - outf(DST_OFF_PITCH, backOffsetPitch); - - (*pXAAInfo->SubsequentScreenToScreenCopy)(pScreenInfo, - xa, ya, - destx, desty, - w, h); -#if 0 - /* FIXME: Move depth buffers? */ - ATIMach64WaitForFIFO(pATI, 2); - outf(SRC_OFF_PITCH, depthOffsetPitch); - outf(DST_OFF_PITCH, depthOffsetPitch); - - if (pATI->depthMoves) - ATIScreenToScreenCopyDepth(pScreenInfo, - xa, ya, - destx, desty, - w, h); -#endif - } - - ATIMach64WaitForFIFO(pATI, 2); - outf(SRC_OFF_PITCH, pATI->NewHW.dst_off_pitch); - outf(DST_OFF_PITCH, pATI->NewHW.src_off_pitch); - - free(pptNew2); - free(pboxNew2); - free(pptNew1); - free(pboxNew1); - - ATIDRIMarkSyncInt(pScreenInfo); -#endif } /* Compute log base 2 of val. */ @@ -1093,12 +805,6 @@ Bool ATIDRIScreenInit( ScreenPtr pScreen ) pDRIInfo->SwapContext = ATIDRISwapContext; pDRIInfo->InitBuffers = ATIDRIInitBuffers; pDRIInfo->MoveBuffers = ATIDRIMoveBuffers; -#ifdef USE_XAA - if (!pATI->useEXA) { - pDRIInfo->TransitionTo2d = ATIDRITransitionTo2d; - pDRIInfo->TransitionTo3d = ATIDRITransitionTo3d; - } -#endif /* USE_XAA */ #ifdef USE_EXA if (pATI->useEXA) { pDRIInfo->TransitionTo2d = ATIDRITransitionTo2d_EXA; diff --git a/src/atiload.c b/src/atiload.c index b96ed4b..68c2b7d 100644 --- a/src/atiload.c +++ b/src/atiload.c @@ -82,16 +82,6 @@ ATILoadModules } } #endif -#ifdef USE_XAA - /* Load XAA if needed */ - if (!pATI->useEXA && pATI->OptionAccel && - !xf86LoadSubModule(pScreenInfo, "xaa")) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Falling back to shadowfb\n"); - pATI->OptionAccel = 0; - pATI->OptionShadowFB = 1; - } -#endif /* Load shadow frame buffer code if needed */ if (pATI->OptionShadowFB && diff --git a/src/atimach64.c b/src/atimach64.c index e3897ea..7a229d4 100644 --- a/src/atimach64.c +++ b/src/atimach64.c @@ -248,20 +248,6 @@ ATIMach64PreInit pATIHW->src_cntl = SRC_LINE_X_DIR; /* Initialise scissor, allowing for offscreen areas */ -#ifdef USE_XAA - if (!pATI->useEXA) - { - int width, height, total; - - pATIHW->sc_right = (pATI->displayWidth * pATI->XModifier) - 1; - width = pATI->displayWidth * pATI->bitsPerPixel; - total = pScreenInfo->videoRam * (1024 * 8); - height = (total + width - 1) / width; - if (height > ATIMach64MaxY + 1) - height = ATIMach64MaxY + 1; - pATIHW->sc_bottom = height - 1; - } -#endif /* USE_XAA */ #ifdef USE_EXA if (pATI->useEXA) diff --git a/src/atimach64accel.c b/src/atimach64accel.c index 9293c5e..8a4ad75 100644 --- a/src/atimach64accel.c +++ b/src/atimach64accel.c @@ -262,10 +262,6 @@ ATIMach64Sync /* EXA sets pEXA->needsSync to FALSE on its own */ #endif -#ifdef USE_XAA - if (pATI->pXAAInfo) - pATI->pXAAInfo->NeedToSync = FALSE; -#endif if (pATI->Chip >= ATI_CHIP_264VTB) { @@ -402,668 +398,3 @@ TestRegisterCachingXV(ScrnInfoPtr pScreenInfo) TestRegisterCaching(SCALER_BUF1_OFFSET_V); } -#ifdef USE_XAA -/* - * ATIMach64SetupForScreenToScreenCopy -- - * - * This function sets up the draw engine for a series of screen-to-screen copy - * operations. - */ -static void -ATIMach64SetupForScreenToScreenCopy -( - ScrnInfoPtr pScreenInfo, - int xdir, - int ydir, - int rop, - unsigned int planemask, - int TransparencyColour -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 3); - outf(DP_WRITE_MASK, planemask); - outf(DP_SRC, DP_MONO_SRC_ALLONES | - SetBits(SRC_BLIT, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC)); - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX)); - -#ifdef AVOID_DGA - - if (TransparencyColour == -1) - -#else /* AVOID_DGA */ - - if (!pATI->XAAForceTransBlit && (TransparencyColour == -1)) - -#endif /* AVOID_DGA */ - - { - outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE); - } - else - { - ATIMach64WaitForFIFO(pATI, 2); - outf(CLR_CMP_CLR, TransparencyColour); - outf(CLR_CMP_CNTL, CLR_CMP_FN_EQUAL | CLR_CMP_SRC_2D); - } - - pATI->dst_cntl = 0; - - if (ydir > 0) - pATI->dst_cntl |= DST_Y_DIR; - if (xdir > 0) - pATI->dst_cntl |= DST_X_DIR; - - if (pATI->XModifier == 1) - outf(DST_CNTL, pATI->dst_cntl); - else - pATI->dst_cntl |= DST_24_ROT_EN; -} - -/* - * ATIMach64SubsequentScreenToScreenCopy -- - * - * This function performs a screen-to-screen copy operation. - */ -static void -ATIMach64SubsequentScreenToScreenCopy -( - ScrnInfoPtr pScreenInfo, - int xSrc, - int ySrc, - int xDst, - int yDst, - int w, - int h -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - xSrc *= pATI->XModifier; - xDst *= pATI->XModifier; - w *= pATI->XModifier; - - ATIDRISync(pScreenInfo); - - /* Disable clipping if it gets in the way */ - ATIMach64ValidateClip(pATI, xDst, xDst + w - 1, yDst, yDst + h - 1); - - if (!(pATI->dst_cntl & DST_X_DIR)) - { - xSrc += w - 1; - xDst += w - 1; - } - - if (!(pATI->dst_cntl & DST_Y_DIR)) - { - ySrc += h - 1; - yDst += h - 1; - } - - if (pATI->XModifier != 1) - outf(DST_CNTL, pATI->dst_cntl | SetBits((xDst / 4) % 6, DST_24_ROT)); - - ATIMach64WaitForFIFO(pATI, 4); - outf(SRC_Y_X, SetWord(xSrc, 1) | SetWord(ySrc, 0)); - outf(SRC_WIDTH1, w); - outf(DST_Y_X, SetWord(xDst, 1) | SetWord(yDst, 0)); - outf(DST_HEIGHT_WIDTH, SetWord(w, 1) | SetWord(h, 0)); - - /* - * On VTB's and later, the engine will randomly not wait for a copy - * operation to commit its results to video memory before starting the next - * one. The probability of such occurrences increases with GUI_WB_FLUSH - * (or GUI_WB_FLUSH_P) setting, bitsPerPixel and/or CRTC clock. This - * would point to some kind of video memory bandwidth problem were it noti - * for the fact that the problem occurs less often (but still occurs) when - * copying larger rectangles. - */ - if ((pATI->Chip >= ATI_CHIP_264VTB) && !pATI->OptionDevel) - ATIMach64Sync(pScreenInfo); -} - -/* - * ATIMach64SetupForSolidFill -- - * - * This function sets up the draw engine for a series of solid fills. - */ -static void -ATIMach64SetupForSolidFill -( - ScrnInfoPtr pScreenInfo, - int colour, - int rop, - unsigned int planemask -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 5); - outf(DP_WRITE_MASK, planemask); - outf(DP_SRC, DP_MONO_SRC_ALLONES | - SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC)); - outf(DP_FRGD_CLR, colour); - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX)); - - outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE); - - if (pATI->XModifier == 1) - outf(DST_CNTL, DST_X_DIR | DST_Y_DIR); -} - -/* - * ATIMach64SubsequentSolidFillRect -- - * - * This function performs a solid rectangle fill. - */ -static void -ATIMach64SubsequentSolidFillRect -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int w, - int h -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - if (pATI->XModifier != 1) - { - x *= pATI->XModifier; - w *= pATI->XModifier; - - outf(DST_CNTL, SetBits((x / 4) % 6, DST_24_ROT) | - (DST_X_DIR | DST_Y_DIR | DST_24_ROT_EN)); - } - - /* Disable clipping if it gets in the way */ - ATIMach64ValidateClip(pATI, x, x + w - 1, y, y + h - 1); - - ATIMach64WaitForFIFO(pATI, 2); - outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0)); - outf(DST_HEIGHT_WIDTH, SetWord(w, 1) | SetWord(h, 0)); -} - -/* - * ATIMach64SetupForSolidLine -- - * - * This function sets up the draw engine for a series of solid lines. It is - * not used for 24bpp because the engine doesn't support it. - */ -static void -ATIMach64SetupForSolidLine -( - ScrnInfoPtr pScreenInfo, - int colour, - int rop, - unsigned int planemask -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 5); - outf(DP_WRITE_MASK, planemask); - outf(DP_SRC, DP_MONO_SRC_ALLONES | - SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC)); - outf(DP_FRGD_CLR, colour); - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX)); - - outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE); - - ATIMach64ValidateClip(pATI, pATI->NewHW.sc_left, pATI->NewHW.sc_right, - pATI->NewHW.sc_top, pATI->NewHW.sc_bottom); -} - -/* - * ATIMach64SubsequentSolidHorVertLine -- - * - * This is called to draw a solid horizontal or vertical line. This does a - * one-pixel wide solid fill. - */ -static void -ATIMach64SubsequentSolidHorVertLine -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int len, - int dir -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 3); - outf(DST_CNTL, DST_X_DIR | DST_Y_DIR); - outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0)); - - if (dir == DEGREES_0) - outf(DST_HEIGHT_WIDTH, SetWord(len, 1) | SetWord(1, 0)); - else /* if (dir == DEGREES_270) */ - outf(DST_HEIGHT_WIDTH, SetWord(1, 1) | SetWord(len, 0)); -} - -/* - * ATIMach64SubsequentSolidBresenhamLine -- - * - * This function draws a line using the Bresenham line engine. - */ -static void -ATIMach64SubsequentSolidBresenhamLine -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int major, - int minor, - int err, - int len, - int octant -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - CARD32 dst_cntl = DST_LAST_PEL; - - if (octant & YMAJOR) - dst_cntl |= DST_Y_MAJOR; - - if (!(octant & XDECREASING)) - dst_cntl |= DST_X_DIR; - - if (!(octant & YDECREASING)) - dst_cntl |= DST_Y_DIR; - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 6); - outf(DST_CNTL, dst_cntl); - outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0)); - outf(DST_BRES_ERR, minor + err); - outf(DST_BRES_INC, minor); - outf(DST_BRES_DEC, minor - major); - outf(DST_BRES_LNTH, len); -} - -/* - * ATIMach64SetupForMono8x8PatternFill -- - * - * This function sets up the draw engine for a series of 8x8 1bpp pattern - * fills. - */ -static void -ATIMach64SetupForMono8x8PatternFill -( - ScrnInfoPtr pScreenInfo, - int patx, - int paty, - int fg, - int bg, - int rop, - unsigned int planemask -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 3); - outf(DP_WRITE_MASK, planemask); - outf(DP_SRC, DP_MONO_SRC_PATTERN | - SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC)); - outf(DP_FRGD_CLR, fg); - - if (bg == -1) - { - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) | - SetBits(MIX_DST, DP_BKGD_MIX)); - } - else - { - ATIMach64WaitForFIFO(pATI, 2); - outf(DP_BKGD_CLR, bg); - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) | - SetBits(ATIMach64ALU[rop], DP_BKGD_MIX)); - } - - ATIMach64WaitForFIFO(pATI, 4); - outf(PAT_REG0, patx); - outf(PAT_REG1, paty); - outf(PAT_CNTL, PAT_MONO_EN); - - outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE); - - if (pATI->XModifier == 1) - outf(DST_CNTL, DST_X_DIR | DST_Y_DIR); -} - -/* - * ATIMach64SubsequentMono8x8PatternFillRect -- - * - * This function performs an 8x8 1bpp pattern fill. - */ -static void -ATIMach64SubsequentMono8x8PatternFillRect -( - ScrnInfoPtr pScreenInfo, - int patx, - int paty, - int x, - int y, - int w, - int h -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - if (pATI->XModifier != 1) - { - x *= pATI->XModifier; - w *= pATI->XModifier; - - outf(DST_CNTL, SetBits((x / 4) % 6, DST_24_ROT) | - (DST_X_DIR | DST_Y_DIR | DST_24_ROT_EN)); - } - - /* Disable clipping if it gets in the way */ - ATIMach64ValidateClip(pATI, x, x + w - 1, y, y + h - 1); - - ATIMach64WaitForFIFO(pATI, 2); - outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0)); - outf(DST_HEIGHT_WIDTH, SetWord(w, 1) | SetWord(h, 0)); -} - -/* - * ATIMach64SetupForScanlineCPUToScreenColorExpandFill -- - * - * This function sets up the engine for a series of colour expansion fills. - */ -static void -ATIMach64SetupForScanlineCPUToScreenColorExpandFill -( - ScrnInfoPtr pScreenInfo, - int fg, - int bg, - int rop, - unsigned int planemask -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - ATIMach64WaitForFIFO(pATI, 3); - outf(DP_WRITE_MASK, planemask); - outf(DP_SRC, DP_MONO_SRC_HOST | - SetBits(SRC_FRGD, DP_FRGD_SRC) | SetBits(SRC_BKGD, DP_BKGD_SRC)); - outf(DP_FRGD_CLR, fg); - - if (bg == -1) - { - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) | - SetBits(MIX_DST, DP_BKGD_MIX)); - } - else - { - ATIMach64WaitForFIFO(pATI, 2); - outf(DP_BKGD_CLR, bg); - outf(DP_MIX, SetBits(ATIMach64ALU[rop], DP_FRGD_MIX) | - SetBits(ATIMach64ALU[rop], DP_BKGD_MIX)); - } - - outf(CLR_CMP_CNTL, CLR_CMP_FN_FALSE); - - if (pATI->XModifier == 1) - outf(DST_CNTL, DST_X_DIR | DST_Y_DIR); -} - -/* - * ATIMach64SubsequentScanlineCPUToScreenColorExpandFill -- - * - * This function sets up the engine for a single colour expansion fill. - */ -static void -ATIMach64SubsequentScanlineCPUToScreenColorExpandFill -( - ScrnInfoPtr pScreenInfo, - int x, - int y, - int w, - int h, - int skipleft -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRISync(pScreenInfo); - - if (pATI->XModifier != 1) - { - x *= pATI->XModifier; - w *= pATI->XModifier; - skipleft *= pATI->XModifier; - - outf(DST_CNTL, SetBits((x / 4) % 6, DST_24_ROT) | - (DST_X_DIR | DST_Y_DIR | DST_24_ROT_EN)); - } - - pATI->ExpansionBitmapWidth = (w + 31) / 32; - - ATIMach64WaitForFIFO(pATI, 3); - pATI->sc_left = x + skipleft; - pATI->sc_right = x + w - 1; - outf(SC_LEFT_RIGHT, - SetWord(pATI->sc_right, 1) | SetWord(pATI->sc_left, 0)); - outf(DST_Y_X, SetWord(x, 1) | SetWord(y, 0)); - outf(DST_HEIGHT_WIDTH, - SetWord(pATI->ExpansionBitmapWidth * 32, 1) | SetWord(h, 0)); -} - -/* - * ATIMach64SubsequentColorExpandScanline -- - * - * This function feeds a bitmap scanline to the engine for a colour expansion - * fill. This is written to do burst transfers for those platforms that can do - * them, and to improve CPU/engine concurrency. - */ -static void -ATIMach64SubsequentColorExpandScanline -( - ScrnInfoPtr pScreenInfo, - int iBuffer -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - CARD32 *pBitmapData = pATI->ExpansionBitmapScanlinePtr[iBuffer]; - int w = pATI->ExpansionBitmapWidth; - - ATIDRISync(pScreenInfo); - - while (w > 0) - { - /* - * Transfers are done in chunks of up to 64 bytes in length (32 on - * earlier controllers). - */ - int nDWord = w; - if (nDWord > pATI->nHostFIFOEntries) - nDWord = pATI->nHostFIFOEntries; - - /* Make enough FIFO slots available */ - ATIMach64WaitForFIFO(pATI, nDWord); - - /* - * Always start transfers on a chuck-sized boundary. Note that - * HOST_DATA_0 is actually on a 512-byte boundary, but *pBitmapData can - * only be guaranteed to be on a chunk-sized boundary. - * - * Transfer current chunk. With any luck, the compiler won't mangle - * this too badly... - */ - -# if defined(ATIMove32) - - { - ATIMove32(pATI->pHOST_DATA, pBitmapData, nDWord); - } - -# else - - { - volatile CARD32 *pDst; - CARD32 *pSrc; - unsigned int iDWord; - - iDWord = 16 - nDWord; - pDst = (volatile CARD32 *)pATI->pHOST_DATA - iDWord; - pSrc = pBitmapData - iDWord; - - switch (iDWord) - { - case 0: MMIO_MOVE32(pDst + 0, 0, *(pSrc + 0)); - case 1: MMIO_MOVE32(pDst + 1, 0, *(pSrc + 1)); - case 2: MMIO_MOVE32(pDst + 2, 0, *(pSrc + 2)); - case 3: MMIO_MOVE32(pDst + 3, 0, *(pSrc + 3)); - case 4: MMIO_MOVE32(pDst + 4, 0, *(pSrc + 4)); - case 5: MMIO_MOVE32(pDst + 5, 0, *(pSrc + 5)); - case 6: MMIO_MOVE32(pDst + 6, 0, *(pSrc + 6)); - case 7: MMIO_MOVE32(pDst + 7, 0, *(pSrc + 7)); - case 8: MMIO_MOVE32(pDst + 8, 0, *(pSrc + 8)); - case 9: MMIO_MOVE32(pDst + 9, 0, *(pSrc + 9)); - case 10: MMIO_MOVE32(pDst + 10, 0, *(pSrc + 10)); - case 11: MMIO_MOVE32(pDst + 11, 0, *(pSrc + 11)); - case 12: MMIO_MOVE32(pDst + 12, 0, *(pSrc + 12)); - case 13: MMIO_MOVE32(pDst + 13, 0, *(pSrc + 13)); - case 14: MMIO_MOVE32(pDst + 14, 0, *(pSrc + 14)); - case 15: MMIO_MOVE32(pDst + 15, 0, *(pSrc + 15)); - - default: /* Muffle compiler */ - break; - } - } - -# endif - - /* Step to next chunk */ - pBitmapData += nDWord; - w -= nDWord; - pATI->nAvailableFIFOEntries -= nDWord; - } - - pATI->EngineIsBusy = TRUE; -} - -/* - * ATIMach64AccelInit -- - * - * This function fills in structure fields needed for acceleration on Mach64 - * variants. - */ -Bool -ATIMach64AccelInit -( - ScreenPtr pScreen -) -{ - ScrnInfoPtr pScreenInfo = xf86ScreenToScrn(pScreen); - ATIPtr pATI = ATIPTR(pScreenInfo); - XAAInfoRecPtr pXAAInfo; - - if (!(pATI->pXAAInfo = XAACreateInfoRec())) - return FALSE; - - pXAAInfo = pATI->pXAAInfo; - - /* This doesn't seem quite right... */ - if (pATI->XModifier == 1) - { - pXAAInfo->Flags = PIXMAP_CACHE | OFFSCREEN_PIXMAPS; - pXAAInfo->Flags |= LINEAR_FRAMEBUFFER; - } - - /* Sync */ - pXAAInfo->Sync = ATIMach64Sync; - - /* Screen-to-screen copy */ - pXAAInfo->SetupForScreenToScreenCopy = ATIMach64SetupForScreenToScreenCopy; - pXAAInfo->SubsequentScreenToScreenCopy = - ATIMach64SubsequentScreenToScreenCopy; - - /* Solid fills */ - pXAAInfo->SetupForSolidFill = ATIMach64SetupForSolidFill; - pXAAInfo->SubsequentSolidFillRect = ATIMach64SubsequentSolidFillRect; - - /* 8x8 mono pattern fills */ - pXAAInfo->Mono8x8PatternFillFlags = - -#if X_BYTE_ORDER != X_LITTLE_ENDIAN - - BIT_ORDER_IN_BYTE_MSBFIRST | - -#endif /* X_BYTE_ORDER */ - - HARDWARE_PATTERN_PROGRAMMED_BITS | HARDWARE_PATTERN_SCREEN_ORIGIN; - pXAAInfo->SetupForMono8x8PatternFill = ATIMach64SetupForMono8x8PatternFill; - pXAAInfo->SubsequentMono8x8PatternFillRect = - ATIMach64SubsequentMono8x8PatternFillRect; - - /* - * Use scanline version of colour expansion, not only for the non-ix86 - * case, but also to avoid PCI retries. - */ - pXAAInfo->ScanlineCPUToScreenColorExpandFillFlags = - LEFT_EDGE_CLIPPING | LEFT_EDGE_CLIPPING_NEGATIVE_X | - CPU_TRANSFER_PAD_DWORD | SCANLINE_PAD_DWORD; - if (pATI->XModifier != 1) - pXAAInfo->ScanlineCPUToScreenColorExpandFillFlags |= TRIPLE_BITS_24BPP; - pXAAInfo->NumScanlineColorExpandBuffers = 1; - - /* Align bitmap data on a 64-byte boundary */ - pATI->ExpansionBitmapWidth = /* DWord size in bits */ - ((pATI->displayWidth * pATI->XModifier) + 31) & ~31U; - pATI->ExpansionBitmapScanlinePtr[1] = - (CARD32 *)XNFalloc((pATI->ExpansionBitmapWidth >> 3) + 63); - pATI->ExpansionBitmapScanlinePtr[0] = - (pointer)(((unsigned long)pATI->ExpansionBitmapScanlinePtr[1] + 63) & - ~63UL); - pXAAInfo->ScanlineColorExpandBuffers = - (CARD8 **)pATI->ExpansionBitmapScanlinePtr; - pXAAInfo->SetupForScanlineCPUToScreenColorExpandFill = - ATIMach64SetupForScanlineCPUToScreenColorExpandFill; - pXAAInfo->SubsequentScanlineCPUToScreenColorExpandFill = - ATIMach64SubsequentScanlineCPUToScreenColorExpandFill; - pXAAInfo->SubsequentColorExpandScanline = - ATIMach64SubsequentColorExpandScanline; - - /* The engine does not support the following primitives for 24bpp */ - if (pATI->XModifier != 1) - goto XAAInit; - - /* Solid lines */ - pXAAInfo->SetupForSolidLine = ATIMach64SetupForSolidLine; - pXAAInfo->SubsequentSolidHorVertLine = ATIMach64SubsequentSolidHorVertLine; - pXAAInfo->SubsequentSolidBresenhamLine = - ATIMach64SubsequentSolidBresenhamLine; - -XAAInit: - if (!XAAInit(pScreen, pATI->pXAAInfo)) { - XAADestroyInfoRec(pATI->pXAAInfo); - pATI->pXAAInfo = NULL; - return FALSE; - } - - return TRUE; -} -#endif /* USE_XAA */ diff --git a/src/atimach64accel.h b/src/atimach64accel.h index 92fb4df..3aaf1b0 100644 --- a/src/atimach64accel.h +++ b/src/atimach64accel.h @@ -24,10 +24,6 @@ #define ___ATIMACH64ACCEL_H___ 1 #include "atipriv.h" - -#ifdef HAVE_XAA_H -#include "xaa.h" -#endif #include "exa.h" #define ATIMach64MaxX 4095 @@ -36,9 +32,6 @@ #ifdef USE_EXA extern Bool ATIMach64ExaInit(ScreenPtr); #endif -#ifdef USE_XAA -extern Bool ATIMach64AccelInit(ScreenPtr); -#endif extern void ATIMach64Sync(ScrnInfoPtr); /* atimach64accel.c */ diff --git a/src/atimach64io.h b/src/atimach64io.h index 80553f8..caff26d 100644 --- a/src/atimach64io.h +++ b/src/atimach64io.h @@ -236,7 +236,7 @@ do { \ * Set upon DRISwapContext and when DRI accesses the GPU engine * from within the server, see DRIInitBuffers/DRIMoveBuffers. * - * Forces the EXA/XAA software paths to sync before accessing the FB memory. + * Forces the EXA software paths to sync before accessing the FB memory. */ static __inline__ void ATIDRIMarkSyncInt(ScrnInfoPtr _pScrInfo) { @@ -245,16 +245,12 @@ static __inline__ void ATIDRIMarkSyncInt(ScrnInfoPtr _pScrInfo) if (_pATI->useEXA) exaMarkSync(_pScrInfo->pScreen); #endif -#ifdef USE_XAA - if (!_pATI->useEXA) - SET_SYNC_FLAG(_pATI->pXAAInfo); /* NeedToSync = TRUE */ -#endif } /* * Set upon DRISwapContext and when the server acquires the DRI lock. * - * Forces the EXA/XAA accelerated paths to sync before accessing the GPU engine. + * Forces the EXA accelerated paths to sync before accessing the GPU engine. */ static __inline__ void ATIDRIMarkSyncExt(ScrnInfoPtr _pScrInfo) { @@ -271,12 +267,6 @@ static __inline__ void ATIDRISync(ScrnInfoPtr _pScrInfo) if (_pATI->NeedDRISync) exaWaitSync(_pScrInfo->pScreen); } #endif -#ifdef USE_XAA - if (_pATI->directRenderingEnabled && _pATI->pXAAInfo) - { - if (_pATI->NeedDRISync) (*_pATI->pXAAInfo->Sync)(_pScrInfo); - } -#endif } #define ATIDRILock(_pScrInfo) \ diff --git a/src/atimach64xv.c b/src/atimach64xv.c index bb3f486..5288557 100644 --- a/src/atimach64xv.c +++ b/src/atimach64xv.c @@ -510,26 +510,6 @@ ATIMach64XVMemFree ATIPtr pATI ); -#ifdef USE_XAA -/* - * ATIMach64RemoveLinearCallback -- - * - * This is called by the framebuffer manager to release the offscreen XVideo - * buffer after the video has been temporarily disabled due to its window being - * iconified or completely occluded. - */ -static void -ATIMach64RemoveLinearCallback -( - FBLinearPtr pLinear -) -{ - ATIPtr pATI = ATIPTR(xf86ScreenToScrn(pLinear->pScreen)); - - pATI->pXVBuffer = NULL; - outf(OVERLAY_SCALE_CNTL, SCALE_EN); -} -#endif /* USE_XAA */ /* * ATIMach64StopVideo -- @@ -554,20 +534,6 @@ ATIMach64StopVideo REGION_EMPTY(pScreen, &pATI->VideoClip); -#ifdef USE_XAA - if (!pATI->useEXA && !Cleanup) - { - /* - * Free offscreen buffer if/when its allocation is needed by XAA's - * pixmap cache. - */ - FBLinearPtr linear = (FBLinearPtr)pATI->pXVBuffer; - if (linear) - linear->RemoveLinearCallback = - ATIMach64RemoveLinearCallback; - return; - } -#endif /* USE_XAA */ ATIMach64XVMemFree(pScreen, pATI->pXVBuffer, pATI); pATI->pXVBuffer = NULL; @@ -1563,54 +1529,6 @@ ATICloseXVideo /* Functions for offscreen memory management */ -#ifdef USE_XAA -static FBLinearPtr -ATIResizeOffscreenLinear -( - ScreenPtr pScreen, - FBLinearPtr pLinear, - int Size -) -{ - if (Size <= 0) - { - xf86FreeOffscreenLinear(pLinear); - return NULL; - } - - if (pLinear) - { - if ((pLinear->size >= Size) || - xf86ResizeOffscreenLinear(pLinear, Size)) - { - pLinear->MoveLinearCallback = NULL; - pLinear->RemoveLinearCallback = NULL; - return pLinear; - } - - xf86FreeOffscreenLinear(pLinear); - } - - pLinear = xf86AllocateOffscreenLinear(pScreen, Size, 16, NULL, NULL, NULL); - - if (!pLinear) - { - int maxSize; - - xf86QueryLargestOffscreenLinear(pScreen, &maxSize, 16, - PRIORITY_EXTREME); - - if (maxSize < Size) - return NULL; - - xf86PurgeUnlockedOffscreenAreas(pScreen); - pLinear = - xf86AllocateOffscreenLinear(pScreen, Size, 16, NULL, NULL, NULL); - } - - return pLinear; -} -#endif /* USE_XAA */ static pointer ATIMach64XVMemAlloc @@ -1643,23 +1561,6 @@ ATIMach64XVMemAlloc } #endif /* USE_EXA */ -#ifdef USE_XAA - if (!pATI->useEXA) { - FBLinearPtr linear = (FBLinearPtr)pVideo; - int cpp = pATI->AdjustDepth; - - /* XAA allocates in units of pixels at the screen bpp, so adjust size - * appropriately. - */ - size = (size + cpp - 1) / cpp; - - linear = ATIResizeOffscreenLinear(pScreen, linear, size); - if (linear != NULL) { - *offset = linear->offset * cpp; - return linear; - } - } -#endif /* USE_XAA */ *offset = 0; return NULL; @@ -1682,13 +1583,5 @@ ATIMach64XVMemFree } #endif /* USE_EXA */ -#ifdef USE_XAA - if (!pATI->useEXA) { - FBLinearPtr linear = (FBLinearPtr)pVideo; - - if (linear != NULL) - ATIResizeOffscreenLinear(pScreen, linear, 0); - } -#endif /* USE_XAA */ } diff --git a/src/atiscreen.c b/src/atiscreen.c index c1eff4c..0adee08 100644 --- a/src/atiscreen.c +++ b/src/atiscreen.c @@ -100,243 +100,6 @@ ATIRefreshArea } } -#ifdef USE_XAA -/* - * ATIMinBits -- - * - * Compute log base 2 of val. - */ -static int -ATIMinBits -( - int val -) -{ - int bits; - - if (!val) return 1; - for (bits = 0; val; val >>= 1, ++bits); - return bits; -} - -static Bool -ATIMach64SetupMemXAA_NoDRI -( - ScrnInfoPtr pScreenInfo, - ScreenPtr pScreen -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - { - /* - * Note: If PixelArea exceeds the engine's maximum, the excess is - * never used, even though it would be useful for such things - * as XVideo buffers. - */ - int maxScanlines = ATIMach64MaxY; - int maxPixelArea = maxScanlines * pScreenInfo->displayWidth; - int PixelArea = pScreenInfo->videoRam * 1024 * 8 / pATI->bitsPerPixel; - if (PixelArea > maxPixelArea) - PixelArea = maxPixelArea; - xf86InitFBManagerArea(pScreen, PixelArea, 2); - } - - return TRUE; -} - -#ifdef XF86DRI_DEVEL -/* - * Memory layour for XAA with DRI (no local_textures): - * | front | pixmaps, xv | back | depth | textures | c | - * - * 1024x768@16bpp with 8 MB: - * | 1.5 MB | ~3.5 MB | 1.5 MB | 1.5 MB | 0 | c | - * - * 1024x768@32bpp with 8 MB: - * | 3.0 MB | ~0.5 MB | 3.0 MB | 1.5 MB | 0 | c | - * - * "c" is the hw cursor which occupies 1KB - */ -static Bool -ATIMach64SetupMemXAA -( - ScrnInfoPtr pScreenInfo, - ScreenPtr pScreen -) -{ - ATIPtr pATI = ATIPTR(pScreenInfo); - - ATIDRIServerInfoPtr pATIDRIServer = pATI->pDRIServerInfo; - int cpp = pATI->bitsPerPixel >> 3; - int widthBytes = pScreenInfo->displayWidth * cpp; - int zWidthBytes = pScreenInfo->displayWidth * 2; /* always 16-bit z-buffer */ - int fbSize = pScreenInfo->videoRam * 1024; - int bufferSize = pScreenInfo->virtualY * widthBytes; - int zBufferSize = pScreenInfo->virtualY * zWidthBytes; - int offscreenBytes, total, scanlines; - - pATIDRIServer->fbX = 0; - pATIDRIServer->fbY = 0; - pATIDRIServer->frontOffset = 0; - pATIDRIServer->frontPitch = pScreenInfo->displayWidth; - - /* Calculate memory remaining for pixcache and textures after - * front, back, and depth buffers - */ - offscreenBytes = fbSize - ( 2 * bufferSize + zBufferSize ); - - if ( !pATIDRIServer->IsPCI && !pATI->OptionLocalTextures ) { - /* Don't allocate a local texture heap for AGP unless requested */ - pATIDRIServer->textureSize = 0; - } else { - int l, maxPixcache; - -#ifdef XvExtension - - int xvBytes; - - /* Try for enough pixmap cache for DVD and a full viewport - */ - xvBytes = 720*480*cpp; /* enough for single-buffered DVD */ - maxPixcache = xvBytes > bufferSize ? xvBytes : bufferSize; - -#else /* XvExtension */ - - /* Try for one viewport */ - maxPixcache = bufferSize; - -#endif /* XvExtension */ - - pATIDRIServer->textureSize = offscreenBytes - maxPixcache; - - /* If that gives us less than half the offscreen mem available for textures, split - * the available mem between textures and pixmap cache - */ - if (pATIDRIServer->textureSize < (offscreenBytes/2)) { - pATIDRIServer->textureSize = offscreenBytes/2; - } - - if (pATIDRIServer->textureSize <= 0) - pATIDRIServer->textureSize = 0; - - l = ATIMinBits((pATIDRIServer->textureSize-1) / MACH64_NR_TEX_REGIONS); - if (l < MACH64_LOG_TEX_GRANULARITY) l = MACH64_LOG_TEX_GRANULARITY; - - /* Round the texture size up to the nearest whole number of - * texture regions. Again, be greedy about this, don't round - * down. - */ - pATIDRIServer->logTextureGranularity = l; - pATIDRIServer->textureSize = - (pATIDRIServer->textureSize >> l) << l; - } - - total = fbSize - pATIDRIServer->textureSize; - scanlines = total / widthBytes; - if (scanlines > ATIMach64MaxY) scanlines = ATIMach64MaxY; - - /* Recalculate the texture offset and size to accommodate any - * rounding to a whole number of scanlines. - * FIXME: Is this actually needed? - */ - pATIDRIServer->textureOffset = scanlines * widthBytes; - pATIDRIServer->textureSize = fbSize - pATIDRIServer->textureOffset; - - /* Set a minimum usable local texture heap size. This will fit - * two 256x256 textures. We check this after any rounding of - * the texture area. - */ - if (pATIDRIServer->textureSize < 256*256 * cpp * 2) { - pATIDRIServer->textureOffset = 0; - pATIDRIServer->textureSize = 0; - scanlines = fbSize / widthBytes; - if (scanlines > ATIMach64MaxY) scanlines = ATIMach64MaxY; - } - - pATIDRIServer->depthOffset = scanlines * widthBytes - zBufferSize; - pATIDRIServer->depthPitch = pScreenInfo->displayWidth; - pATIDRIServer->depthY = pATIDRIServer->depthOffset/widthBytes; - pATIDRIServer->depthX = (pATIDRIServer->depthOffset - - (pATIDRIServer->depthY * widthBytes)) / cpp; - - pATIDRIServer->backOffset = pATIDRIServer->depthOffset - bufferSize; - pATIDRIServer->backPitch = pScreenInfo->displayWidth; - pATIDRIServer->backY = pATIDRIServer->backOffset/widthBytes; - pATIDRIServer->backX = (pATIDRIServer->backOffset - - (pATIDRIServer->backY * widthBytes)) / cpp; - - scanlines = fbSize / widthBytes; - if (scanlines > ATIMach64MaxY) scanlines = ATIMach64MaxY; - - if ( pATIDRIServer->IsPCI && pATIDRIServer->textureSize == 0 ) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Not enough memory for local textures, disabling DRI\n"); - ATIDRICloseScreen(pScreen); - pATI->directRenderingEnabled = FALSE; - } else { - BoxRec ScreenArea; - - ScreenArea.x1 = 0; - ScreenArea.y1 = 0; - ScreenArea.x2 = pATI->displayWidth; - ScreenArea.y2 = scanlines; - - if (!xf86InitFBManager(pScreen, &ScreenArea)) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Memory manager initialization to (%d,%d) (%d,%d) failed\n", - ScreenArea.x1, ScreenArea.y1, - ScreenArea.x2, ScreenArea.y2); - return FALSE; - } else { - int width, height; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Memory manager initialized to (%d,%d) (%d,%d)\n", - ScreenArea.x1, ScreenArea.y1, ScreenArea.x2, ScreenArea.y2); - - if (xf86QueryLargestOffscreenArea(pScreen, &width, &height, 0, 0, 0)) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Largest offscreen area available: %d x %d\n", - width, height); - - /* lines in offscreen area needed for depth buffer and textures */ - pATI->depthTexLines = scanlines - - pATIDRIServer->depthOffset / widthBytes; - pATI->backLines = scanlines - - pATIDRIServer->backOffset / widthBytes - - pATI->depthTexLines; - pATI->depthTexArea = NULL; - pATI->backArea = NULL; - } else { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Unable to determine largest offscreen area available\n"); - return FALSE; - } - - } - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, "Will use %d kB of offscreen memory for XAA\n", - (offscreenBytes - pATIDRIServer->textureSize)/1024); - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, "Will use back buffer at offset 0x%x\n", - pATIDRIServer->backOffset); - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, "Will use depth buffer at offset 0x%x\n", - pATIDRIServer->depthOffset); - - if (pATIDRIServer->textureSize > 0) { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Will use %d kB for local textures at offset 0x%x\n", - pATIDRIServer->textureSize/1024, - pATIDRIServer->textureOffset); - } - } - - return TRUE; -} -#endif /* XF86DRI_DEVEL */ -#endif /* USE_XAA */ /* * ATIScreenInit -- @@ -480,33 +243,6 @@ ATIScreenInit(SCREEN_INIT_ARGS_DECL) xf86SetBlackWhitePixels(pScreen); -#ifdef USE_XAA - - if (!pATI->useEXA) { - - /* Memory manager setup */ - -#ifdef XF86DRI_DEVEL - if (pATI->directRenderingEnabled) - { - if (!ATIMach64SetupMemXAA(pScreenInfo, pScreen)) - return FALSE; - } - else -#endif /* XF86DRI_DEVEL */ - { - if (!ATIMach64SetupMemXAA_NoDRI(pScreenInfo, pScreen)) - return FALSE; - } - - /* Setup acceleration */ - - if (pATI->OptionAccel && !ATIMach64AccelInit(pScreen)) - return FALSE; - - } - -#endif /* USE_XAA */ #ifdef USE_EXA @@ -621,13 +357,6 @@ ATICloseScreen (CLOSE_SCREEN_ARGS_DECL) free(pATI->pExa); pATI->pExa = NULL; } -#endif -#ifdef USE_XAA - if (pATI->pXAAInfo) - { - XAADestroyInfoRec(pATI->pXAAInfo); - pATI->pXAAInfo = NULL; - } #endif if (pATI->pCursorInfo) { @@ -638,14 +367,6 @@ ATICloseScreen (CLOSE_SCREEN_ARGS_DECL) pATI->Closeable = FALSE; ATILeaveGraphics(pScreenInfo, pATI); -#ifdef USE_XAA - if (!pATI->useEXA) - { - free(pATI->ExpansionBitmapScanlinePtr[1]); - pATI->ExpansionBitmapScanlinePtr[0] = NULL; - pATI->ExpansionBitmapScanlinePtr[1] = NULL; - } -#endif free(pATI->pShadow); pATI->pShadow = NULL; diff --git a/src/atistruct.h b/src/atistruct.h index 6b56cac..8088b97 100644 --- a/src/atistruct.h +++ b/src/atistruct.h @@ -55,9 +55,6 @@ #ifdef USE_EXA #include "exa.h" #endif -#ifdef USE_XAA -#include "xaa.h" -#endif #include "xf86Cursor.h" #include "xf86Pci.h" #if GET_ABI_MAJOR(ABI_VIDEODRV_VERSION) < 6 @@ -314,14 +311,11 @@ typedef struct _ATIRec unsigned long Block0Base, Block1Base; /* - * XAA interface. + * EXA interface. */ Bool useEXA; #ifdef USE_EXA ExaDriverPtr pExa; -#endif -#ifdef USE_XAA - XAAInfoRecPtr pXAAInfo; #endif int nAvailableFIFOEntries, nFIFOEntries, nHostFIFOEntries; CARD8 EngineIsBusy, EngineIsLocked, XModifier; @@ -329,10 +323,6 @@ typedef struct _ATIRec CARD32 sc_left_right, sc_top_bottom; CARD16 sc_left, sc_right, sc_top, sc_bottom; /* Current scissors */ pointer pHOST_DATA; /* Current HOST_DATA_* transfer window address */ -#ifdef USE_XAA - CARD32 *ExpansionBitmapScanlinePtr[2]; - int ExpansionBitmapWidth; -#endif #ifdef USE_EXA Bool RenderAccelEnabled; Mach64ContextRegs3D m3d; @@ -400,20 +390,13 @@ typedef struct _ATIRec DGAFunctionRec ATIDGAFunctions; int nDGAMode; - /* - * XAAForceTransBlit alters the behavior of 'SetupForScreenToScreenCopy', - * such that ~0 is interpreted as a legitimate transparency key. - */ - CARD8 XAAForceTransBlit; - #endif /* AVOID_DGA */ /* * XVideo-related data. */ DevUnion XVPortPrivate[1]; - pointer pXVBuffer; /* USE_EXA: ExaOffscreenArea* - USE_XAA: FBLinearPtr */ + pointer pXVBuffer; /* USE_EXA: ExaOffscreenArea */ RegionRec VideoClip; int SurfacePitch, SurfaceOffset; CARD8 AutoPaint, DoubleBuffer, CurrentBuffer, ActiveSurface; @@ -502,12 +485,6 @@ typedef struct _ATIRec Bool have3DWindows; /* offscreen memory management */ -#ifdef USE_XAA - int backLines; - FBAreaPtr backArea; - int depthTexLines; - FBAreaPtr depthTexArea; -#endif CARD8 OptionIsPCI; /* Force PCI mode */ CARD8 OptionDMAMode; /* async, sync, mmio */ CARD8 OptionAGPMode; /* AGP mode */ -- cgit v1.2.3