/* * MGA Millennium (MGA2064W) with Ti3026 RAMDAC driver v.1.1 * * The driver is written without any chip documentation. All extended ports * and registers come from tracing the VESA-ROM functions. * The BitBlt Engine comes from tracing the windows BitBlt function. * * Author: Radoslaw Kapitan, Tarnow, Poland * kapitan@student.uci.agh.edu.pl * original source * * Now that MATROX has released documentation to the public, enhancing * this driver has become much easier. Nevertheless, this work continues * to be based on Radoslaw's original source * * Contributors: * Andrew van der Stock * ajv@greebo.net * additions, corrections, cleanups * * Dirk Hohndel * hohndel@XFree86.Org * integrated into XFree86-3.1.2Gg * fixed some problems with PCI probing and mapping * * David Dawes * dawes@XFree86.Org * some cleanups, and fixed some problems * * Andrew E. Mileski * aem@ott.hookup.net * RAMDAC timing, and BIOS stuff * * Leonard N. Zubkoff * lnz@dandelion.com * Support for 8MB boards, RGB Sync-on-Green, and DPMS. * Guy DESBIEF * g.desbief@aix.pacwan.net * RAMDAC MGA1064 timing, * Doug Merritt * doug@netcom.com * Fixed 32bpp hires 8MB horizontal line glitch at middle right * Niels Gram Jeppesen * Added digital screen option for first head */ #ifdef HAVE_CONFIG_H #include "config.h" #endif /* All drivers should typically include these */ #include "xf86.h" #include "xf86_OSproc.h" #ifdef HAVE_XF86MODEBANDWIDTH #include "xf86Modes.h" #endif #if GET_ABI_MAJOR(ABI_VIDEODRV_VERSION) < 6 #include "xf86Resources.h" #include "xf86RAC.h" #endif /* All drivers need this */ #include "compiler.h" /* Drivers that need to access the PCI config space directly need this */ #ifndef XSERVER_LIBPCIACCESS #include "xf86Pci.h" #endif /* All drivers initialising the SW cursor need this */ #include "mipointer.h" #include "micmap.h" #include "xf86DDC.h" #include "vbe.h" #include "fb.h" #include "dixstruct.h" #include "mga_reg.h" #include "mga.h" #include "mga_macros.h" #include "mga_maven.h" #ifdef USE_XAA #include "xaa.h" #endif #include "xf86cmap.h" #include "shadowfb.h" #include "fbdevhw.h" #ifdef MGADRI #include "dri.h" #endif #include /* * Forward definitions for the functions that make up the driver. */ /* Mandatory functions */ static const OptionInfoRec * MGAAvailableOptions(int chipid, int busid); static void MGAIdentify(int flags); #ifdef XSERVER_LIBPCIACCESS static Bool MGAPciProbe(DriverPtr drv, int entity_num, struct pci_device * dev, intptr_t match_data); #else static Bool MGAProbe(DriverPtr drv, int flags); #endif static Bool MGAPreInit(ScrnInfoPtr pScrn, int flags); static Bool MGAScreenInit(SCREEN_INIT_ARGS_DECL); static Bool MGAEnterVT(VT_FUNC_ARGS_DECL); static Bool MGAEnterVTFBDev(VT_FUNC_ARGS_DECL); static void MGALeaveVT(VT_FUNC_ARGS_DECL); static Bool MGACloseScreen(CLOSE_SCREEN_ARGS_DECL); static Bool MGASaveScreen(ScreenPtr pScreen, int mode); static Bool MGASaveScreenCrtc2(ScreenPtr pScreen, int mode); /* Optional functions */ static void MGAFreeScreen(FREE_SCREEN_ARGS_DECL); static ModeStatus MGAValidMode(SCRN_ARG_TYPE arg, DisplayModePtr mode, Bool verbose, int flags); #if ((__GNUC__ == 3) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ >= 4) #define __must_check __attribute__((warn_unused_result)) #else #define __must_check /* */ #endif /* Internally used functions */ static Bool __must_check MGAMapMem(ScrnInfoPtr pScrn); static Bool MGAUnmapMem(ScrnInfoPtr pScrn); static void MGASave(ScrnInfoPtr pScrn); static void MGARestore(ScrnInfoPtr pScrn); static Bool MGAModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode); static void MGABlockHandler(BLOCKHANDLER_ARGS_DECL); static void MGAG100BlackMagic(ScrnInfoPtr pScrn); static int MGAEntityIndex = -1; #include "mga_merge.h" static const struct mga_device_attributes attribs[] = { /* 2064 */ [0] = { 1, 0, 0, 1, 0, 0, 0, 0, old_BARs, (BLK_OPAQUE_EXPANSION | FASTBLT_BUG | USE_LINEAR_EXPANSION), { { 0, 0 }, /* System VCO frequencies */ { 50000, 220000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 50000, /* Memory clock */ 14318, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 8192, 0x1000, /* Memory probe size & offset values */ }, /* 1064 */ [1] = { 0, 1, 0, 0, 1, 0, 0, 0, probe_BARs, (USE_LINEAR_EXPANSION), { /* There used to be code in MGARamdacInit (mga_dacG.c) that would * set this to 170000 if the chip revision was less than 3. Is * that needed here? */ { 50000, 230000 }, /* System VCO frequencies */ { 50000, 230000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 50000, /* Memory clock */ 14318, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 8192, 0x1000, /* Memory probe size & offset values */ }, /* 2164 */ [2] = { 1, 0, 0, 1, 0, 0, 0, 0, new_BARs, (BLK_OPAQUE_EXPANSION | TRANSC_SOLID_FILL | USE_RECTS_FOR_LINES | USE_LINEAR_EXPANSION), { { 0, 0 }, /* System VCO frequencies */ { 50000, 220000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 50000, /* Memory clock */ 14318, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 8192, 0x1000, /* Memory probe size & offset values */ }, /* 2164 AGP */ [3] = { 1, 0, 0, 1, 0, 0, 0, 0, new_BARs, (BLK_OPAQUE_EXPANSION | TRANSC_SOLID_FILL | USE_RECTS_FOR_LINES | USE_LINEAR_EXPANSION), { { 0, 0 }, /* System VCO frequencies */ { 50000, 220000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 50000, /* Memory clock */ 14318, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_AGP_1x /* Host interface */ }, 8192, 0x1000, /* Memory probe size & offset values */ }, /* G100 PCI */ [4] = { 0, 1, 0, 0, 1, 0, 0, 0, new_BARs, (MGA_NO_PLANEMASK | USE_LINEAR_EXPANSION), { { 50000, 230000 }, /* System VCO frequencies */ { 50000, 230000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 50000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 8192, 0x1000, /* Memory probe size & offset values */ }, /* G100 AGP */ [5] = { 0, 1, 0, 0, 1, 0, 0, 0, new_BARs, (MGA_NO_PLANEMASK | USE_LINEAR_EXPANSION), { { 50000, 230000 }, /* System VCO frequencies */ { 50000, 230000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 50000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_AGP_1x /* Host interface */ }, 8192, 0x1000, /* Memory probe size & offset values */ }, /* G200 PCI */ [6] = { 0, 1, 0, 0, 1, 1, 1, 1, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 50000, 230000 }, /* System VCO frequencies */ { 50000, 230000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 50000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 8192, 0x1000, /* Memory probe size & offset values */ }, /* G200 AGP */ [7] = { 0, 1, 0, 0, 1, 1, 1, 1, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 50000, 230000 }, /* System VCO frequencies */ { 50000, 230000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 50000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_AGP_2x /* Host interface */ }, 8192, 0x1000, /* Memory probe size & offset values */ }, /* G400 / G450 */ [8] = { 0, 1, 1, 0, 1, 1, 2, 1, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 50000, 252000 }, /* System VCO frequencies */ { 50000, 252000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 200000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_AGP_4x /* Host interface */ }, 32768, 0x1000, /* Memory probe size & offset values */ }, /* G550 */ [9] = { 0, 1, 1, 0, 1, 1, 2, 1, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 256000, 600000 }, /* System VCO frequencies */ { 256000, 600000 }, /* Pixel VCO frequencies */ { 256000, 600000 }, /* Video VCO frequencies */ 284000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_AGP_4x /* Host interface */ }, 32768, 0x1000, /* Memory probe size & offset values */ }, /* G200SE A PCI */ [10] = { 0, 1, 0, 0, 1, 0, 0, 0, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 50000, 230000 }, /* System VCO frequencies */ { 50000, 230000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 50000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 4096, 0x800, /* Memory probe size & offset values */ }, /* G200SE B PCI */ [11] = { 0, 1, 0, 0, 1, 0, 0, 0, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 50000, 114000 }, /* System VCO frequencies */ { 50000, 114000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 45000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 4096, 0x800, /* Memory probe size & offset values */ }, /* G200EV */ [12] = { 0, 1, 0, 0, 1, 0, 0, 0, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 50000, 230000 }, /* System VCO frequencies */ { 50000, 230000 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 45000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 16384, 0x4000, /* Memory probe size & offset values */ }, /* G200WB */ [13] = { 0, 1, 0, 0, 1, 0, 0, 0, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 50000, 230000 }, /* System VCO frequencies */ { 50000, 203400 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 45000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 8192, 0x4000, /* Memory probe size & offset values */ }, /* G200EH */ [14] = { 0, 1, 0, 0, 1, 0, 0, 0, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 50000, 230000 }, /* System VCO frequencies */ { 50000, 203400 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 45000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 8192, 0x4000, /* Memory probe size & offset values */ }, /* G200ER */ [15] = { 0, 1, 0, 0, 1, 0, 0, 0, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 50000, 230000 }, /* System VCO frequencies */ { 50000, 203400 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 45000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 16384, 0x4000, /* Memory probe size & offset values */ }, /* G200WB */ [16] = { 0, 1, 0, 0, 1, 0, 0, 0, new_BARs, (TRANSC_SOLID_FILL | TWO_PASS_COLOR_EXPAND | USE_LINEAR_EXPANSION), { { 50000, 230000 }, /* System VCO frequencies */ { 50000, 203400 }, /* Pixel VCO frequencies */ { 0, 0 }, /* Video VCO frequencies */ 45000, /* Memory clock */ 27050, /* PLL reference frequency */ 0, /* Supports fast bitblt? */ MGA_HOST_PCI /* Host interface */ }, 16384, 0x4000, /* Memory probe size & offset values */ } }; #ifdef XSERVER_LIBPCIACCESS #define MGA_DEVICE_MATCH(d, i) \ { 0x102B, (d), PCI_MATCH_ANY, PCI_MATCH_ANY, 0, 0, (i) } #define MGA_SUBDEVICE_MATCH(d, s, i) \ { 0x102B, (d), 0x102B, (s), 0, 0, (i) } static const struct pci_id_match mga_device_match[] = { MGA_DEVICE_MATCH(PCI_CHIP_MGA2064, 0), MGA_DEVICE_MATCH(PCI_CHIP_MGA1064, 1), MGA_DEVICE_MATCH(PCI_CHIP_MGA2164, 2), MGA_DEVICE_MATCH(PCI_CHIP_MGA2164_AGP, 3), MGA_DEVICE_MATCH(PCI_CHIP_MGAG100, 4), MGA_DEVICE_MATCH(PCI_CHIP_MGAG100_PCI, 5), MGA_DEVICE_MATCH(PCI_CHIP_MGAG200, 6), MGA_DEVICE_MATCH(PCI_CHIP_MGAG200_PCI, 7), MGA_DEVICE_MATCH(PCI_CHIP_MGAG400, 8), MGA_DEVICE_MATCH(PCI_CHIP_MGAG550, 9), MGA_DEVICE_MATCH(PCI_CHIP_MGAG200_SE_A_PCI, 10), MGA_DEVICE_MATCH(PCI_CHIP_MGAG200_SE_B_PCI, 11), MGA_DEVICE_MATCH(PCI_CHIP_MGAG200_EV_PCI, 12), MGA_DEVICE_MATCH( PCI_CHIP_MGAG200_WINBOND_PCI, 13 ), MGA_DEVICE_MATCH( PCI_CHIP_MGAG200_EH_PCI, 14 ), MGA_DEVICE_MATCH(PCI_CHIP_MGAG200_ER_PCI, 15 ), MGA_DEVICE_MATCH( PCI_CHIP_MGAG200_EW3_PCI, 16 ), { 0, 0, 0 }, }; #endif /* Supported chipsets */ static SymTabRec MGAChipsets[] = { { PCI_CHIP_MGA2064, "mga2064w" }, { PCI_CHIP_MGA1064, "mga1064sg" }, { PCI_CHIP_MGA2164, "mga2164w" }, { PCI_CHIP_MGA2164_AGP, "mga2164w AGP" }, { PCI_CHIP_MGAG100, "mgag100" }, { PCI_CHIP_MGAG100_PCI, "mgag100 PCI" }, { PCI_CHIP_MGAG200, "mgag200" }, { PCI_CHIP_MGAG200_PCI, "mgag200 PCI" }, { PCI_CHIP_MGAG200_SE_A_PCI, "mgag200 SE A PCI" }, { PCI_CHIP_MGAG200_SE_B_PCI, "mgag200 SE B PCI" }, { PCI_CHIP_MGAG200_EV_PCI, "mgag200 EV Maxim" }, { PCI_CHIP_MGAG200_ER_PCI, "mgag200 ER SH7757" }, { PCI_CHIP_MGAG200_WINBOND_PCI, "mgag200 eW Nuvoton" }, { PCI_CHIP_MGAG200_EW3_PCI, "mgag200 eW3 Nuvoton" }, { PCI_CHIP_MGAG200_EH_PCI, "mgag200eH" }, { PCI_CHIP_MGAG400, "mgag400" }, { PCI_CHIP_MGAG550, "mgag550" }, {-1, NULL } }; static PciChipsets MGAPciChipsets[] = { { PCI_CHIP_MGA2064, PCI_CHIP_MGA2064, RES_SHARED_VGA }, { PCI_CHIP_MGA1064, PCI_CHIP_MGA1064, RES_SHARED_VGA }, { PCI_CHIP_MGA2164, PCI_CHIP_MGA2164, RES_SHARED_VGA }, { PCI_CHIP_MGA2164_AGP, PCI_CHIP_MGA2164_AGP,RES_SHARED_VGA }, { PCI_CHIP_MGAG100, PCI_CHIP_MGAG100, RES_SHARED_VGA }, { PCI_CHIP_MGAG100_PCI, PCI_CHIP_MGAG100_PCI,RES_SHARED_VGA }, { PCI_CHIP_MGAG200, PCI_CHIP_MGAG200, RES_SHARED_VGA }, { PCI_CHIP_MGAG200_PCI, PCI_CHIP_MGAG200_PCI,RES_SHARED_VGA }, { PCI_CHIP_MGAG200_SE_B_PCI, PCI_CHIP_MGAG200_SE_B_PCI, RES_SHARED_VGA }, { PCI_CHIP_MGAG200_SE_A_PCI, PCI_CHIP_MGAG200_SE_A_PCI, RES_SHARED_VGA }, { PCI_CHIP_MGAG200_EV_PCI, PCI_CHIP_MGAG200_EV_PCI, RES_SHARED_VGA }, { PCI_CHIP_MGAG200_ER_PCI, PCI_CHIP_MGAG200_ER_PCI, RES_SHARED_VGA }, { PCI_CHIP_MGAG200_WINBOND_PCI, PCI_CHIP_MGAG200_WINBOND_PCI, RES_SHARED_VGA }, { PCI_CHIP_MGAG200_EW3_PCI, PCI_CHIP_MGAG200_EW3_PCI, RES_SHARED_VGA }, { PCI_CHIP_MGAG200_EH_PCI, PCI_CHIP_MGAG200_EH_PCI, RES_SHARED_VGA }, { PCI_CHIP_MGAG400, PCI_CHIP_MGAG400, RES_SHARED_VGA }, { PCI_CHIP_MGAG550, PCI_CHIP_MGAG550, RES_SHARED_VGA }, { -1, -1, RES_UNDEFINED } }; /* * This contains the functions needed by the server after loading the * driver module. It must be supplied, and gets added the driver list by * the Module Setup funtion in the dynamic case. In the static case a * reference to this is compiled in, and this requires that the name of * this DriverRec be an upper-case version of the driver name. */ _X_EXPORT DriverRec MGA_C_NAME = { MGA_VERSION, MGA_DRIVER_NAME, MGAIdentify, #ifdef XSERVER_LIBPCIACCESS NULL, #else MGAProbe, #endif MGAAvailableOptions, NULL, 0, NULL, #ifdef XSERVER_LIBPCIACCESS mga_device_match, MGAPciProbe #endif }; static const OptionInfoRec MGAOptions[] = { { OPTION_SW_CURSOR, "SWcursor", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_HW_CURSOR, "HWcursor", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_PCI_RETRY, "PciRetry", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_SYNC_ON_GREEN, "SyncOnGreen", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_NOACCEL, "NoAccel", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_SHOWCACHE, "ShowCache", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_MGA_SDRAM, "MGASDRAM", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_SHADOW_FB, "ShadowFB", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_FBDEV, "UseFBDev", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_COLOR_KEY, "ColorKey", OPTV_INTEGER, {0}, FALSE }, { OPTION_SET_MCLK, "SetMclk", OPTV_FREQ, {0}, FALSE }, { OPTION_OVERCLOCK_MEM, "OverclockMem", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_VIDEO_KEY, "VideoKey", OPTV_INTEGER, {0}, FALSE }, { OPTION_ROTATE, "Rotate", OPTV_ANYSTR, {0}, FALSE }, { OPTION_TEXTURED_VIDEO, "TexturedVideo",OPTV_BOOLEAN, {0}, FALSE }, { OPTION_CRTC2HALF, "Crtc2Half", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_CRTC2RAM, "Crtc2Ram", OPTV_INTEGER, {0}, FALSE }, { OPTION_INT10, "Int10", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_AGP_MODE, "AGPMode", OPTV_INTEGER, {0}, FALSE }, { OPTION_AGP_SIZE, "AGPSize", OPTV_INTEGER, {0}, FALSE }, { OPTION_DIGITAL1, "DigitalScreen1",OPTV_BOOLEAN, {0}, FALSE }, { OPTION_DIGITAL2, "DigitalScreen2",OPTV_BOOLEAN, {0}, FALSE }, { OPTION_TV, "TV", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_TVSTANDARD, "TVStandard", OPTV_ANYSTR, {0}, FALSE }, { OPTION_CABLETYPE, "CableType", OPTV_ANYSTR, {0}, FALSE }, { OPTION_NOHAL, "NoHal", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_SWAPPED_HEAD, "SwappedHead", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_DRI, "DRI", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_MERGEDFB, "MergedFB", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_HSYNC2, "Monitor2HSync", OPTV_ANYSTR, {0}, FALSE }, { OPTION_VREFRESH2, "Monitor2VRefresh", OPTV_ANYSTR, {0}, FALSE }, { OPTION_MONITOR2POS, "Monitor2Position", OPTV_ANYSTR, {0}, FALSE }, { OPTION_METAMODES, "MetaModes", OPTV_ANYSTR, {0}, FALSE }, { OPTION_OLDDMA, "OldDmaInit", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_PCIDMA, "ForcePciDma", OPTV_BOOLEAN, {0}, FALSE }, { OPTION_ACCELMETHOD, "AccelMethod", OPTV_ANYSTR, {0}, FALSE }, { OPTION_KVM, "KVM", OPTV_BOOLEAN, {0}, FALSE }, { -1, NULL, OPTV_NONE, {0}, FALSE } }; #ifdef XFree86LOADER static MODULESETUPPROTO(mgaSetup); static XF86ModuleVersionInfo mgaVersRec = { MGA_DRIVER_NAME, MODULEVENDORSTRING, MODINFOSTRING1, MODINFOSTRING2, XORG_VERSION_CURRENT, PACKAGE_VERSION_MAJOR, PACKAGE_VERSION_MINOR, PACKAGE_VERSION_PATCHLEVEL, ABI_CLASS_VIDEODRV, /* This is a video driver */ ABI_VIDEODRV_VERSION, MOD_CLASS_VIDEODRV, {0,0,0,0} }; _X_EXPORT XF86ModuleData MGA_MODULE_DATA = { &mgaVersRec, mgaSetup, NULL }; static pointer mgaSetup(pointer module, pointer opts, int *errmaj, int *errmin) { static Bool setupDone = FALSE; /* This module should be loaded only once, but check to be sure. */ if (!setupDone) { setupDone = TRUE; xf86AddDriver(&MGA_C_NAME, module, 1); /* * The return value must be non-NULL on success even though there * is no TearDownProc. */ return (pointer)1; } else { if (errmaj) *errmaj = LDR_ONCEONLY; return NULL; } } #endif /* XFree86LOADER */ /* * ramdac info structure initialization */ static MGARamdacRec DacInit = { FALSE, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL, NULL, 90000, /* maxPixelClock */ 0, X_DEFAULT, X_DEFAULT, FALSE }; Bool MGAGetRec(ScrnInfoPtr pScrn) { /* * Allocate an MGARec, and hook it into pScrn->driverPrivate. * pScrn->driverPrivate is initialised to NULL, so we can check if * the allocation has already been done. */ if (pScrn->driverPrivate != NULL) return TRUE; pScrn->driverPrivate = xnfcalloc(sizeof(MGARec), 1); /* Initialise it */ MGAPTR(pScrn)->Dac = DacInit; return TRUE; } void MGAFreeRec(ScrnInfoPtr pScrn) { free(pScrn->driverPrivate); pScrn->driverPrivate = NULL; } static const OptionInfoRec * MGAAvailableOptions(int chipid, int busid) { return MGAOptions; } /* Mandatory */ static void MGAIdentify(int flags) { xf86PrintChipsets(MGA_NAME, "driver for Matrox chipsets", MGAChipsets); } #ifdef XSERVER_LIBPCIACCESS Bool MGAPciProbe(DriverPtr drv, int entity_num, struct pci_device * dev, intptr_t match_data) { ScrnInfoPtr pScrn = NULL; EntityInfoPtr pEnt; MGAPtr pMga; if (pci_device_has_kernel_driver(dev)) { /* If it's a G200 server chip, it's probably on KMS, so bail; if not, * it might be using matroxfb, which is ok. */ switch (dev->device_id) { case PCI_CHIP_MGAG200_SE_A_PCI: case PCI_CHIP_MGAG200_SE_B_PCI: case PCI_CHIP_MGAG200_EV_PCI: case PCI_CHIP_MGAG200_ER_PCI: case PCI_CHIP_MGAG200_WINBOND_PCI: case PCI_CHIP_MGAG200_EH_PCI: xf86DrvMsg(0, X_ERROR, "mga: The PCI device 0x%x at %2.2d@%2.2d:%2.2d:%1.1d has a kernel module claiming it.\n", dev->device_id, dev->bus, dev->domain, dev->dev, dev->func); xf86DrvMsg(0, X_ERROR, "mga: This driver cannot operate until it has been unloaded.\n"); return FALSE; } } /* Allocate a ScrnInfoRec and claim the slot */ pScrn = xf86ConfigPciEntity(pScrn, 0, entity_num, MGAPciChipsets, NULL, NULL, NULL, NULL, NULL ); if (pScrn != NULL) { /* Fill in what we can of the ScrnInfoRec */ pScrn->driverVersion = MGA_VERSION; pScrn->driverName = MGA_DRIVER_NAME; pScrn->name = MGA_NAME; pScrn->Probe = NULL; pScrn->PreInit = MGAPreInit; pScrn->ScreenInit = MGAScreenInit; pScrn->SwitchMode = MGASwitchMode; pScrn->AdjustFrame = MGAAdjustFrame; pScrn->EnterVT = MGAEnterVT; pScrn->LeaveVT = MGALeaveVT; pScrn->FreeScreen = MGAFreeScreen; pScrn->ValidMode = MGAValidMode; /* Allocate the MGARec driverPrivate */ if (!MGAGetRec(pScrn)) { return FALSE; } pMga = MGAPTR(pScrn); pMga->chip_attribs = & attribs[ match_data ]; pMga->PciInfo = dev; /* * For cards that can do dual head per entity, mark the entity * as sharable. */ pEnt = xf86GetEntityInfo(entity_num); if (pMga->chip_attribs->dual_head_possible) { MGAEntPtr pMgaEnt = NULL; DevUnion *pPriv; xf86SetEntitySharable(entity_num); /* Allocate an entity private if necessary */ if (MGAEntityIndex < 0) MGAEntityIndex = xf86AllocateEntityPrivateIndex(); pPriv = xf86GetEntityPrivate(pScrn->entityList[0], MGAEntityIndex); if (!pPriv->ptr) { pPriv->ptr = xnfcalloc(sizeof(MGAEntRec), 1); pMgaEnt = pPriv->ptr; pMgaEnt->lastInstance = -1; } else { pMgaEnt = pPriv->ptr; } /* * Set the entity instance for this instance of the driver. For * dual head per card, instance 0 is the "master" instance, driving * the primary head, and instance 1 is the "slave". */ pMgaEnt->lastInstance++; xf86SetEntityInstanceForScreen(pScrn, pScrn->entityList[0], pMgaEnt->lastInstance); } } return (pScrn != NULL); } #else /* Mandatory */ static Bool MGAProbe(DriverPtr drv, int flags) { int i; GDevPtr *devSections; int *usedChips = NULL; int numDevSections; int numUsed; Bool foundScreen = FALSE; /* * The aim here is to find all cards that this driver can handle, * and for the ones not already claimed by another driver, claim the * slot, and allocate a ScrnInfoRec. * * This should be a minimal probe, and it should under no circumstances * change the state of the hardware. Because a device is found, don't * assume that it will be used. Don't do any initialisations other than * the required ScrnInfoRec initialisations. Don't allocate any new * data structures. */ /* * Check if there has been a chipset override in the config file. * For this we must find out if there is an active device section which * is relevant, i.e., which has no driver specified or has THIS driver * specified. */ if ((numDevSections = xf86MatchDevice(MGA_DRIVER_NAME, &devSections)) <= 0) { /* * There's no matching device section in the config file, so quit * now. */ return FALSE; } /* * We need to probe the hardware first. We then need to see how this * fits in with what is given in the config file, and allow the config * file info to override any contradictions. */ /* * All of the cards this driver supports are PCI, so the "probing" just * amounts to checking the PCI data that the server has already collected. */ if (xf86GetPciVideoInfo() == NULL) { /* * We won't let anything in the config file override finding no * PCI video cards at all. This seems reasonable now, but we'll see. */ return FALSE; } numUsed = xf86MatchPciInstances(MGA_NAME, PCI_VENDOR_MATROX, MGAChipsets, MGAPciChipsets, devSections, numDevSections, drv, &usedChips); /* Free it since we don't need that list after this */ free(devSections); if (numUsed <= 0) return FALSE; if (flags & PROBE_DETECT) foundScreen = TRUE; else for (i = 0; i < numUsed; i++) { ScrnInfoPtr pScrn = NULL; EntityInfoPtr pEnt; int attrib_no; /* Allocate a ScrnInfoRec and claim the slot */ pScrn = xf86ConfigPciEntity(pScrn, 0,usedChips[i], MGAPciChipsets, NULL, NULL, NULL, NULL, NULL); if (pScrn != NULL) { MGAPtr pMga; /* Fill in what we can of the ScrnInfoRec */ pScrn->driverVersion = MGA_VERSION; pScrn->driverName = MGA_DRIVER_NAME; pScrn->name = MGA_NAME; pScrn->Probe = MGAProbe; pScrn->PreInit = MGAPreInit; pScrn->ScreenInit = MGAScreenInit; pScrn->SwitchMode = MGASwitchMode; pScrn->AdjustFrame = MGAAdjustFrame; pScrn->EnterVT = MGAEnterVT; pScrn->LeaveVT = MGALeaveVT; pScrn->FreeScreen = MGAFreeScreen; pScrn->ValidMode = MGAValidMode; foundScreen = TRUE; /* Allocate the MGARec driverPrivate */ if (!MGAGetRec(pScrn)) { return FALSE; } pMga = MGAPTR(pScrn); /* * For cards that can do dual head per entity, mark the entity * as sharable. */ pEnt = xf86GetEntityInfo(usedChips[i]); switch (pEnt->chipset) { case PCI_CHIP_MGA2064: attrib_no = 0; break; case PCI_CHIP_MGA1064: attrib_no = 1; break; case PCI_CHIP_MGA2164: attrib_no = 2; break; case PCI_CHIP_MGA2164_AGP: attrib_no = 3; break; case PCI_CHIP_MGAG100: attrib_no = 4; break; case PCI_CHIP_MGAG100_PCI: attrib_no = 5; break; case PCI_CHIP_MGAG200: attrib_no = 6; break; case PCI_CHIP_MGAG200_PCI: attrib_no = 7; break; case PCI_CHIP_MGAG400: attrib_no = 8; break; case PCI_CHIP_MGAG550: attrib_no = 9; break; case PCI_CHIP_MGAG200_SE_A_PCI: attrib_no = 10; break; case PCI_CHIP_MGAG200_SE_B_PCI: attrib_no = 11; break; case PCI_CHIP_MGAG200_EV_PCI: attrib_no = 12; break; case PCI_CHIP_MGAG200_WINBOND_PCI: attrib_no = 13; break; case PCI_CHIP_MGAG200_EH_PCI: attrib_no = 14; break; case PCI_CHIP_MGAG200_ER_PCI: attrib_no = 15; break; case PCI_CHIP_MGAG200_EW3_PCI: attrib_no = 16; break; default: return FALSE; } pMga->chip_attribs = & attribs[attrib_no]; if (pMga->chip_attribs->dual_head_possible) { MGAEntPtr pMgaEnt = NULL; DevUnion *pPriv; xf86SetEntitySharable(usedChips[i]); /* Allocate an entity private if necessary */ if (MGAEntityIndex < 0) MGAEntityIndex = xf86AllocateEntityPrivateIndex(); pPriv = xf86GetEntityPrivate(pScrn->entityList[0], MGAEntityIndex); if (!pPriv->ptr) { pPriv->ptr = xnfcalloc(sizeof(MGAEntRec), 1); pMgaEnt = pPriv->ptr; pMgaEnt->lastInstance = -1; } else { pMgaEnt = pPriv->ptr; } /* * Set the entity instance for this instance of the driver. For * dual head per card, instance 0 is the "master" instance, driving * the primary head, and instance 1 is the "slave". */ pMgaEnt->lastInstance++; xf86SetEntityInstanceForScreen(pScrn, pScrn->entityList[0], pMgaEnt->lastInstance); } } } free(usedChips); return foundScreen; } #endif /* * MGASoftReset -- * * Resets drawing engine */ void MGASoftReset(ScrnInfoPtr pScrn) { MGAPtr pMga = MGAPTR(pScrn); pMga->FbMapSize = 8192 * 1024; MGAMapMem(pScrn); /* set soft reset bit */ OUTREG(MGAREG_Reset, 1); usleep(200); OUTREG(MGAREG_Reset, 0); /* reset memory */ OUTREG(MGAREG_MACCESS, 1<<15); usleep(10); #if 0 /* This will hang if the PLLs aren't on */ /* wait until drawing engine is ready */ while ( MGAISBUSY() ) usleep(1000); /* flush FIFO */ i = 32; WAITFIFO(i); while ( i-- ) OUTREG(MGAREG_SHIFT, 0); #endif MGAUnmapMem(pScrn); } /* * MGACountRAM -- * * Counts amount of installed RAM */ static int MGACountRam(ScrnInfoPtr pScrn) { MGAPtr pMga = MGAPTR(pScrn); int ProbeSize = pMga->chip_attribs->probe_size; int ProbeSizeOffset = pMga->chip_attribs->probe_offset; int SizeFound = 2048; CARD32 biosInfo = 0; CARD8 seq1; #if 0 /* This isn't correct. It looks like this can have arbitrary data for the memconfig even when the bios has initialized it. At least, my cards don't advertise the documented values (my 8 and 16 Meg G200s have the same values) */ if (pMga->Primary) { /* can only trust this for primary cards */ #ifdef XSERVER_LIBPCIACCESS pci_device_cfg_read_u32(pMga->PciInfo, & biosInfo, PCI_OPTION_REG); #else biosInfo = pciReadLong(pMga->PciTag, PCI_OPTION_REG); #endif } #endif switch(pMga->Chipset) { case PCI_CHIP_MGA2164: case PCI_CHIP_MGA2164_AGP: xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Unable to probe memory amount due to hardware bug. " "Assuming 4096 KB\n"); return 4096; case PCI_CHIP_MGAG400: case PCI_CHIP_MGAG550: if(biosInfo) { switch((biosInfo >> 10) & 0x07) { case 0: return (biosInfo & (1 << 14)) ? 32768 : 16384; case 1: case 2: return 16384; case 3: case 5: return 65536; case 4: return 32768; } } break; case PCI_CHIP_MGAG200: case PCI_CHIP_MGAG200_PCI: if(biosInfo) { switch((biosInfo >> 11) & 0x03) { case 0: return 8192; default: return 16384; } } break; case PCI_CHIP_MGAG100: case PCI_CHIP_MGAG100_PCI: if(biosInfo) /* I'm not sure if the docs are correct */ return (biosInfo & (1 << 12)) ? 16384 : 8192; break; default: break; } if (pMga->FbAddress) { volatile unsigned char* base; unsigned char tmp; int i; pMga->FbMapSize = ProbeSize * 1024; if (!MGAMapMem(pScrn)) { return 0; } base = pMga->FbBase; if (pMga->is_G200SE) pMga->reg_1e24 = INREG(0x1e24); /* stash the model for later */ if (pMga->reg_1e24 >= 0x01) { MGAUnmapMem(pScrn); ProbeSize = 16384; ProbeSizeOffset = 0x10000; pMga->FbMapSize = ProbeSize * 1024; MGAMapMem(pScrn); base = pMga->FbBase; } if (pMga->is_G200SE) { OUTREG8(MGAREG_SEQ_INDEX, 0x01); seq1 = INREG8(MGAREG_SEQ_DATA); seq1 |= 0x20; MGAWAITVSYNC(); MGAWAITBUSY(); OUTREG8(MGAREG_SEQ_DATA, seq1); usleep(20000); } if (pMga->is_G200WB) { CARD32 Option, MaxMapSize; #ifdef XSERVER_LIBPCIACCESS pci_device_cfg_read_u32(pMga->PciInfo, &Option, PCI_OPTION_REG); MaxMapSize = pMga->PciInfo->regions[0].size; #else Option = pciReadLong(pMga->PciTag, PCI_OPTION_REG); MaxMapSize = 1UL << pMga->PciInfo->size[0]; #endif Option = (Option & 0x3000000) >> 24 ; if (Option == 2) ProbeSize = 4*1024; else if(Option == 1) ProbeSize = 8*1024; else if(Option == 0) ProbeSize = 16*1024; if (ProbeSize * 1024 > MaxMapSize) xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Fb size from config space doesn't fit option register\n"); else { MGAUnmapMem(pScrn); pMga->FbMapSize = ProbeSize * 1024; MGAMapMem(pScrn); base = pMga->FbBase; } } /* turn MGA mode on - enable linear frame buffer (CRTCEXT3) */ OUTREG8(MGAREG_CRTCEXT_INDEX, 3); tmp = INREG8(MGAREG_CRTCEXT_DATA); OUTREG8(MGAREG_CRTCEXT_DATA, tmp | 0x80); /* apparently the G200 IP don't have a BIOS to read */ if (pMga->is_G200SE || pMga->is_G200EV || pMga->is_G200WB || pMga->is_G200EH) { CARD32 MemoryAt0, MemoryAt1, Offset; CARD32 FirstMemoryVal1, FirstMemoryVal2; CARD32 SecondMemoryVal1, SecondMemoryVal2; CARD32 TestMemoryLocA, TestMemoryLocB; CARD32 TestMemoryLoc0, TestMemoryLoc1; CARD32 TestA, TestB; MemoryAt0 = base[0]; MemoryAt1 = base[1]; base[0] = 0; base[1] = 0; for (Offset = 0x100000; Offset < (ProbeSize * 1024); Offset += ProbeSizeOffset) { FirstMemoryVal1 = base[Offset]; FirstMemoryVal2 = base[Offset+1]; SecondMemoryVal1 = base[Offset+0x100]; SecondMemoryVal2 = base[Offset+0x101]; base[Offset] = 0x55; base[Offset+1] = 0xaa; base[Offset+0x100] = 0x55; base[Offset+0x101] = 0xaa; OUTREG8(MGAREG_CRTC_INDEX, 0); usleep(8); TestMemoryLocA = base[Offset]; TestMemoryLocB = base[Offset+1]; TestMemoryLoc0 = base[0]; TestMemoryLoc1 = base[1]; base[Offset] = FirstMemoryVal1; base[Offset+1] = FirstMemoryVal2; base[Offset+0x100] = SecondMemoryVal1; base[Offset+0x101] = SecondMemoryVal2; TestA = ((TestMemoryLocB << 8) + TestMemoryLocA); TestB = ((TestMemoryLoc1 << 8) + TestMemoryLoc0); if ((TestA != 0xAA55) || (TestB)) { break; } } base[0] = MemoryAt0; base[1] = MemoryAt1; SizeFound = (Offset / 1024) - 64; } else { /* write, read and compare method split into two loops to make it more reliable on RS/6k -ReneR */ for(i = ProbeSize; i > 2048; i -= 2048) { base[(i * 1024) - 1] = 0xAA; } OUTREG8(MGAREG_CRTC_INDEX, 0); /* flush the cache */ usleep(4); /* twart write combination */ for(i = ProbeSize; i > 2048; i -= 2048) { if(base[(i * 1024) - 1] == 0xAA) { SizeFound = i; break; } } } /* restore CRTCEXT3 state */ OUTREG8(MGAREG_CRTCEXT_INDEX, 3); OUTREG8(MGAREG_CRTCEXT_DATA, tmp); if (pMga->is_G200SE) { OUTREG8(MGAREG_SEQ_INDEX, 0x01); seq1 = INREG8(MGAREG_SEQ_DATA); seq1 &= ~0x20; MGAWAITVSYNC(); MGAWAITBUSY(); OUTREG8(MGAREG_SEQ_DATA, seq1); usleep(20000); } MGAUnmapMem(pScrn); } return SizeFound; } #ifdef EDID_COMPLETE_RAWDATA #undef xf86DoEDID_DDC2 #define xf86DoEDID_DDC2(a, b) xf86DoEEDID(a, b, TRUE) #endif static xf86MonPtr MGAdoDDC(ScrnInfoPtr pScrn) { vgaHWPtr hwp; MGAPtr pMga; xf86MonPtr MonInfo = NULL; const char *from = NULL; hwp = VGAHWPTR(pScrn); pMga = MGAPTR(pScrn); /* Load DDC if we have the code to use it */ /* This gives us DDC1 */ if (pMga->ddc1Read || pMga->i2cInit) { if (!xf86LoadSubModule(pScrn, "ddc")) { /* ddc module not found, we can do without it */ pMga->ddc1Read = NULL; pMga->DDC_Bus1 = NULL; pMga->DDC_Bus2 = NULL; return NULL; } } else return NULL; /* - DDC can use I2C bus */ /* Load I2C if we have the code to use it */ if (pMga->i2cInit) { if (!xf86LoadSubModule(pScrn, "i2c")) { /* i2c module not found, we can do without it */ pMga->i2cInit = NULL; pMga->DDC_Bus1 = NULL; pMga->DDC_Bus2 = NULL; } } /* Map the MGA memory and MMIO areas */ if (!MGAMapMem(pScrn)) return NULL; /* Initialise the MMIO vgahw functions */ vgaHWSetMmioFuncs(hwp, pMga->IOBase, PORT_OFFSET); vgaHWGetIOBase(hwp); /* Map the VGA memory when the primary video */ if (pMga->Primary) { hwp->MapSize = 0x10000; if (!vgaHWMapMem(pScrn)) return NULL; } else { /* XXX Need to write an MGA mode ddc1SetSpeed */ if (pMga->DDC1SetSpeed == vgaHWddc1SetSpeedWeak()) { pMga->DDC1SetSpeed = NULL; xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 2, "DDC1 disabled - chip not in VGA mode\n"); } } /* Save the current state */ MGASave(pScrn); /* It is now safe to talk to the card */ /* Allow access to DDC */ if (pMga->is_G200ER) { CARD8 ucData = inMGAdac(MGA1064_GEN_IO_CTL2); outMGAdac(MGA1064_GEN_IO_CTL2, ucData | 1); } /* Initialize I2C buses - used by DDC if available */ if (pMga->i2cInit) { pMga->i2cInit(pScrn); } /* DDC for second head... */ if (pMga->SecondCrtc && pMga->DDC_Bus2) { MonInfo = xf86DoEDID_DDC2(XF86_SCRN_ARG(pScrn), pMga->DDC_Bus2); from = "I2C"; } else { /* Its the first head... */ if (pMga->DDC_Bus1) { MonInfo = xf86DoEDID_DDC2(XF86_SCRN_ARG(pScrn), pMga->DDC_Bus1); from = "I2C"; } if (!MonInfo) /* Read and output monitor info using DDC1 */ if (pMga->ddc1Read && pMga->DDC1SetSpeed) { MonInfo = xf86DoEDID_DDC1(XF86_SCRN_ARG(pScrn), pMga->DDC1SetSpeed, pMga->ddc1Read ) ; from = "DDC1"; } if (!MonInfo){ vbeInfoPtr pVbe; if (xf86LoadSubModule(pScrn, "vbe")) { pVbe = VBEInit(NULL, pMga->pEnt->index); MonInfo = vbeDoEDID(pVbe, NULL); vbeFree(pVbe); from = "VBE"; } } } if (MonInfo) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "%s monitor info\n", from); xf86PrintEDID(MonInfo); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "end of monitor info\n"); } /* Remove access to DDC */ if (pMga->is_G200ER) { CARD8 ucData = inMGAdac(MGA1064_GEN_IO_CTL2); outMGAdac(MGA1064_GEN_IO_CTL2, ucData & ~1); } /* Restore previous state and unmap MGA memory and MMIO areas */ MGARestore(pScrn); MGAUnmapMem(pScrn); /* Unmap vga memory if we mapped it */ if (xf86IsPrimaryPci(pMga->PciInfo) && !pMga->FBDev) { vgaHWUnmapMem(pScrn); } xf86SetDDCproperties(pScrn, MonInfo); return MonInfo; } void MGAProbeDDC(ScrnInfoPtr pScrn, int index) { vbeInfoPtr pVbe; if (xf86LoadSubModule(pScrn, "vbe")) { pVbe = VBEInit(NULL,index); ConfiguredMonitor = vbeDoEDID(pVbe, NULL); vbeFree(pVbe); } } Bool MGAMavenRead(ScrnInfoPtr pScrn, I2CByte reg, I2CByte *val) { MGAPtr pMga = MGAPTR(pScrn); if (!pMga->Maven) return FALSE; /* FIXME: Using private interfaces for the moment until a more * flexible xf86I2CWriteRead() variant shows up for us * * MAVEN does _not_ like a start bit in the middle of its transaction * MAVEN does _not_ like ACK at the end of the transaction */ if (!pMga->Maven_Bus->I2CStart(pMga->Maven_Bus, pMga->Maven->ByteTimeout)) return FALSE; if (!pMga->Maven_Bus->I2CPutByte(pMga->Maven, MAVEN_READ)) return FALSE; if (!pMga->Maven_Bus->I2CPutByte(pMga->Maven, reg)) return FALSE; pMga->Maven_Bus->I2CStop(pMga->Maven); if (!pMga->Maven_Bus->I2CGetByte(pMga->Maven, val, 0)) return FALSE; pMga->Maven_Bus->I2CStop(pMga->Maven); return TRUE; } /* Mandatory */ static Bool MGAPreInit(ScrnInfoPtr pScrn, int flags) { MGAPtr pMga; MessageType from; int i; double real; int bytesPerPixel; ClockRangePtr clockRanges; const char *s; int flags24; MGAEntPtr pMgaEnt = NULL; Bool Default; /* * Note: This function is only called once at server startup, and * not at the start of each server generation. This means that * only things that are persistent across server generations can * be initialised here. xf86Screens[] is (pScrn is a pointer to one * of these). Privates allocated using xf86AllocateScrnInfoPrivateIndex() * are too, and should be used for data that must persist across * server generations. * * Per-generation data should be allocated with * AllocateScreenPrivateIndex() from the ScreenInit() function. */ /* Check the number of entities, and fail if it isn't one. */ if (pScrn->numEntities != 1) return FALSE; pMga = MGAPTR(pScrn); /* Set here until dri is enabled */ #ifdef MGADRI pMga->haveQuiescense = 1; #endif /* Get the entity, and make sure it is PCI. */ pMga->pEnt = xf86GetEntityInfo(pScrn->entityList[0]); if (pMga->pEnt->location.type != BUS_PCI) return FALSE; /* Allocate an entity private if necessary */ if (xf86IsEntityShared(pScrn->entityList[0])) { pMgaEnt = xf86GetEntityPrivate(pScrn->entityList[0], MGAEntityIndex)->ptr; pMga->entityPrivate = pMgaEnt; } /* Set pMga->device to the relevant Device section */ pMga->device = xf86GetDevFromEntity(pScrn->entityList[0], pScrn->entityInstanceList[0]); if (flags & PROBE_DETECT) { MGAProbeDDC(pScrn, pMga->pEnt->index); return TRUE; } /* The vgahw module should be loaded here when needed */ if (!xf86LoadSubModule(pScrn, "vgahw")) return FALSE; /* * Allocate a vgaHWRec */ if (!vgaHWGetHWRec(pScrn)) return FALSE; #ifndef XSERVER_LIBPCIACCESS /* Find the PCI info for this screen */ pMga->PciInfo = xf86GetPciInfoForEntity(pMga->pEnt->index); pMga->PciTag = pciTag(pMga->PciInfo->bus, pMga->PciInfo->device, pMga->PciInfo->func); #endif pMga->Primary = xf86IsPrimaryPci(pMga->PciInfo); #ifndef XSERVER_LIBPCIACCESS xf86SetOperatingState(resVgaIo, pMga->pEnt->index, ResUnusedOpr); xf86SetOperatingState(resVgaMem, pMga->pEnt->index, ResDisableOpr); #endif /* Set pScrn->monitor */ pScrn->monitor = pScrn->confScreen->monitor; /* * Set the Chipset and ChipRev, allowing config file entries to * override. */ if (pMga->device->chipset && *pMga->device->chipset) { pScrn->chipset = pMga->device->chipset; pMga->Chipset = xf86StringToToken(MGAChipsets, pScrn->chipset); from = X_CONFIG; } else if (pMga->device->chipID >= 0) { pMga->Chipset = pMga->device->chipID; pScrn->chipset = (char *)xf86TokenToString(MGAChipsets, pMga->Chipset); from = X_CONFIG; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ChipID override: 0x%04X\n", pMga->Chipset); } else { from = X_PROBED; pMga->Chipset = DEVICE_ID(pMga->PciInfo); pScrn->chipset = (char *)xf86TokenToString(MGAChipsets, pMga->Chipset); } if (pMga->device->chipRev >= 0) { pMga->ChipRev = pMga->device->chipRev; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ChipRev override: %d\n", pMga->ChipRev); } else { pMga->ChipRev = CHIP_REVISION(pMga->PciInfo); } /* * This shouldn't happen because such problems should be caught in * MGAProbe(), but check it just in case. */ if (pScrn->chipset == NULL) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "ChipID 0x%04X is not recognised\n", pMga->Chipset); return FALSE; } if (pMga->Chipset < 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Chipset \"%s\" is not recognised\n", pScrn->chipset); return FALSE; } xf86DrvMsg(pScrn->scrnIndex, from, "Chipset: \"%s\"", pScrn->chipset); if (pMga->Chipset == PCI_CHIP_MGAG400) { if (pMga->ChipRev >= 0x80) xf86ErrorF(" (G450)\n"); else xf86ErrorF(" (G400)\n"); } else { xf86ErrorF("\n"); } pMga->is_Gx50 = ((pMga->Chipset == PCI_CHIP_MGAG400) && (pMga->ChipRev >= 0x80)) || (pMga->Chipset == PCI_CHIP_MGAG550); pMga->is_G200SE = (pMga->Chipset == PCI_CHIP_MGAG200_SE_A_PCI) || (pMga->Chipset == PCI_CHIP_MGAG200_SE_B_PCI); pMga->is_G200EV = (pMga->Chipset == PCI_CHIP_MGAG200_EV_PCI); pMga->is_G200WB = (pMga->Chipset == PCI_CHIP_MGAG200_WINBOND_PCI) || (pMga->Chipset == PCI_CHIP_MGAG200_EW3_PCI); pMga->is_G200EH = (pMga->Chipset == PCI_CHIP_MGAG200_EH_PCI); pMga->is_G200ER = (pMga->Chipset == PCI_CHIP_MGAG200_ER_PCI); pMga->DualHeadEnabled = FALSE; if (xf86IsEntityShared(pScrn->entityList[0])) {/* dual-head mode requested*/ if ( !MGA_DH_NEEDS_HAL(pMga)) { pMga->DualHeadEnabled = TRUE; } else if (xf86IsPrimInitDone(pScrn->entityList[0])) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "This card requires the \"mga_hal\" module for dual-head operation\n" "\tIt can be found at the Matrox web site \n"); } } /* * Disable HW cursor by default on G200 server chips as these * chips are often used with a remote graphics link which cannot * display the HW cursor. */ switch (pMga->Chipset) { case PCI_CHIP_MGAG200_SE_A_PCI: case PCI_CHIP_MGAG200_SE_B_PCI: case PCI_CHIP_MGAG200_EV_PCI: case PCI_CHIP_MGAG200_ER_PCI: case PCI_CHIP_MGAG200_WINBOND_PCI: case PCI_CHIP_MGAG200_EH_PCI: pMga->HWCursor = FALSE; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "HW cursor is not supported with video redirection on" "G200 server chips.\n If you don't intend to use video " "redirection enable with Option \"HWCursor\" \"On\"\n"); break; default: pMga->HWCursor = TRUE; } from = X_DEFAULT; /* * The preferred method is to use the "hw cursor" option as a tri-state * option, with the default set above. */ if (xf86GetOptValBool(pMga->Options, OPTION_HW_CURSOR, &pMga->HWCursor)) from = X_CONFIG; /* For compatibility, accept this too (as an override) */ if (xf86ReturnOptValBool(pMga->Options, OPTION_SW_CURSOR, FALSE)) { from = X_CONFIG; pMga->HWCursor = FALSE; } pMga->SecondCrtc = FALSE; /* * In case of DualHead, we need to determine if we are the 'master' head * or the 'slave' head. In order to do that, at the end of the first * initialisation, PrimInit is set as DONE to the shared entity. So that * the second initialisation knows that something has been done before it. * This always assume that the first device initialised is the master * head, and the second the slave. * */ if (xf86IsEntityShared(pScrn->entityList[0])) { /* dual-head mode */ if (!xf86IsPrimInitDone(pScrn->entityList[0])) { /* Is it the first initialisation? */ /* First CRTC */ pMgaEnt->pScrn_1 = pScrn; } else if (pMga->DualHeadEnabled) { /* Second CRTC */ pMga->SecondCrtc = TRUE; pMga->HWCursor = FALSE; from = X_DEFAULT; pMgaEnt->pScrn_2 = pScrn; pScrn->AdjustFrame = MGAAdjustFrameCrtc2; /* * Fail initialization of second head if we are in MergeFB mode, * since we do it ourselfs. */ if(pMgaEnt->pScrn_1 && MGAPTR(pMgaEnt->pScrn_1)->MergedFB) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Primary head in Merged framebuffer mode. \n" "Don't let Xfree try to manage the second head.\n" "Remove the second screen in the \"ServerLayout\"\n" "Section of the config file."); return FALSE; } } else { return FALSE; } } xf86DrvMsg(pScrn->scrnIndex, from, "Using %s cursor\n", pMga->HWCursor ? "HW" : "SW"); if (pMga->DualHeadEnabled) { #ifdef MGADRI pMga->GetQuiescence = MGAGetQuiescenceShared; #endif } else { /* single-head mode */ #ifdef MGADRI pMga->GetQuiescence = MGAGetQuiescence; #endif } if (!(pMga->Options = malloc(sizeof(MGAOptions)))) return FALSE; memcpy(pMga->Options, MGAOptions, sizeof(MGAOptions)); /* ajv changes to reflect actual values. see sdk pp 3-2. */ /* these masks just get rid of the crap in the lower bits */ /* For the 2064 and older rev 1064, base0 is the MMIO and base1 is * the framebuffer. */ switch (pMga->chip_attribs->BARs) { case old_BARs: pMga->framebuffer_bar = 1; pMga->io_bar = 0; pMga->iload_bar = -1; break; case probe_BARs: if (pMga->ChipRev < 3) { pMga->framebuffer_bar = 1; pMga->io_bar = 0; pMga->iload_bar = 2; break; } /* FALLTHROUGH */ case new_BARs: pMga->framebuffer_bar = 0; pMga->io_bar = 1; pMga->iload_bar = 2; break; } #ifdef XSERVER_LIBPCIACCESS pMga->FbAddress = pMga->PciInfo->regions[pMga->framebuffer_bar].base_addr; #else pMga->FbAddress = pMga->PciInfo->memBase[pMga->framebuffer_bar] & 0xff800000; #endif xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "Linear framebuffer at 0x%lX\n", (unsigned long)pMga->FbAddress); #ifdef XSERVER_LIBPCIACCESS xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "MMIO registers at 0x%lX\n", (unsigned long) pMga->PciInfo->regions[pMga->io_bar].base_addr); #else pMga->IOAddress = pMga->PciInfo->memBase[pMga->io_bar] & 0xffffc000; xf86DrvMsg(pScrn->scrnIndex, from, "MMIO registers at 0x%lX\n", (unsigned long)pMga->IOAddress); #endif if (pMga->iload_bar != -1) { #ifdef XSERVER_LIBPCIACCESS xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "Pseudo-DMA transfer window at 0x%lX\n", (unsigned long) pMga->PciInfo->regions[pMga->iload_bar].base_addr); #else if (pMga->PciInfo->memBase[2] != 0) { pMga->ILOADAddress = pMga->PciInfo->memBase[2] & 0xffffc000; xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "Pseudo-DMA transfer window at 0x%lX\n", (unsigned long)pMga->ILOADAddress); } #endif } #ifndef XSERVER_LIBPCIACCESS /* * Find the BIOS base. Get it from the PCI config if possible. Otherwise * use the VGA default. */ /* details: rombase sdk pp 4-15 */ if (pMga->PciInfo->biosBase != 0) { pMga->BiosAddress = pMga->PciInfo->biosBase & 0xffff0000; pMga->BiosFrom = X_PROBED; } else if (pMga->Primary) { pMga->BiosAddress = 0xc0000; pMga->BiosFrom = X_DEFAULT; } if (pMga->BiosAddress) { xf86DrvMsg(pScrn->scrnIndex, pMga->BiosFrom, "BIOS at 0x%lX\n", (unsigned long)pMga->BiosAddress); } #endif #ifndef XSERVER_LIBPCIACCESS if (xf86RegisterResources(pMga->pEnt->index, NULL, ResExclusive)) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "xf86RegisterResources() found resource conflicts\n"); MGAFreeRec(pScrn); return FALSE; } #endif /* * The first thing we should figure out is the depth, bpp, etc. * Our default depth is 8, so pass it to the helper function. * We support both 24bpp and 32bpp layouts, so indicate that. */ /* Prefer 32bpp */ flags24 = Support24bppFb | Support32bppFb | PreferConvert24to32; if (pMga->SecondCrtc) flags24 = Support32bppFb; if (xf86ReturnOptValBool(pMga->Options, OPTION_FBDEV, FALSE)) { pMga->FBDev = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Using framebuffer device\n"); /* check for linux framebuffer device */ if (!xf86LoadSubModule(pScrn, "fbdevhw")) return FALSE; if (!fbdevHWInit(pScrn, pMga->PciInfo, NULL)) return FALSE; } /* * If the user has specified the amount of memory in the XF86Config * file, we respect that setting. */ from = X_PROBED; if (pMga->device->videoRam != 0) { pScrn->videoRam = pMga->device->videoRam; from = X_CONFIG; } else if (pMga->FBDev) { pScrn->videoRam = fbdevHWGetVidmem(pScrn)/1024; } else { pScrn->videoRam = MGACountRam(pScrn); } if (pMga->is_G200SE && pScrn->videoRam < 2048) pScrn->confScreen->defaultdepth = 16; if (!xf86SetDepthBpp(pScrn, 0, 0, 0, flags24)) { return FALSE; } else { /* Check that the returned depth is one we support */ switch (pScrn->depth) { case 8: case 16: case 24: /* OK */ break; case 15: if (pMga->Chipset != PCI_CHIP_MGAG200_SE_A_PCI) break; default: xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Given depth (%d) is not supported by this driver\n", pScrn->depth); return FALSE; } } xf86PrintDepthBpp(pScrn); /* * This must happen after pScrn->display has been set because * xf86SetWeight references it. */ if (pScrn->depth > 8) { /* The defaults are OK for us */ rgb zeros = {0, 0, 0}; if (!xf86SetWeight(pScrn, zeros, zeros)) { return FALSE; } else { /* XXX check that weight returned is supported */ ; } } bytesPerPixel = pScrn->bitsPerPixel / 8; /* We use a programmable clock */ pScrn->progClock = TRUE; /* Collect all of the relevant option flags (fill in pScrn->options) */ xf86CollectOptions(pScrn, NULL); /* Process the options */ xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, pMga->Options); if (pMga->is_G200SE) { /* Disable MTRR support on PCIe systems */ #ifdef XSERVER_LIBPCIACCESS uint32_t temp; pci_device_cfg_read_u32(pMga->PciInfo, & temp, 0xDC); #else CARD32 temp = pciReadLong(pMga->PciTag, 0xDC); #endif if ((temp & 0x0000FF00) != 0x0) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Disabling MTRR support.\n"); pScrn->options = xf86ReplaceBoolOption(pScrn->options, "MTRR", FALSE); } } if (pMga->is_G200WB && xf86ReturnOptValBool(pMga->Options, OPTION_KVM, TRUE)) { pMga->KVM = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Enabling KVM\n"); } #if !defined(__powerpc__) pMga->softbooted = FALSE; Default = (pMga->chip_attribs->dual_head_possible && !pMga->Primary && !pMga->SecondCrtc); if (xf86ReturnOptValBool(pMga->Options, OPTION_INT10, Default) && xf86LoadSubModule(pScrn, "int10")) { xf86Int10InfoPtr pInt; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Initializing int10\n"); pInt = xf86InitInt10(pMga->pEnt->index); if (pInt) pMga->softbooted = TRUE; xf86FreeInt10(pInt); } #endif /* Set the bits per RGB for 8bpp mode */ if (pScrn->depth == 8) pScrn->rgbBits = 8; #ifdef MGADRI from = X_DEFAULT; pMga->agpMode = MGA_DEFAULT_AGP_MODE; if (xf86GetOptValInteger(pMga->Options, OPTION_AGP_MODE, &(pMga->agpMode))) { if (pMga->agpMode < 1) { pMga->agpMode = 1; } if (pMga->agpMode > MGA_MAX_AGP_MODE) { pMga->agpMode = MGA_MAX_AGP_MODE; } from = X_CONFIG; } if (xf86GetOptValInteger(pMga->Options, OPTION_AGP_SIZE, &(pMga->agpSize))) { /* check later */ xf86DrvMsg(pScrn->scrnIndex, from, "Using %d MB of AGP memory\n", pMga->agpSize); } xf86DrvMsg(pScrn->scrnIndex, from, "Using AGP %dx mode\n", pMga->agpMode); if (xf86ReturnOptValBool(pMga->Options, OPTION_OLDDMA, FALSE)) { pMga->useOldDmaInit = TRUE; } if (xf86ReturnOptValBool(pMga->Options, OPTION_PCIDMA, FALSE)) { pMga->forcePciDma = TRUE; } #endif if (xf86ReturnOptValBool(pMga->Options, OPTION_NOACCEL, FALSE)) { pMga->NoAccel = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Acceleration disabled\n"); } else { int from = X_DEFAULT; #ifdef USE_EXA char *s = xf86GetOptValString(pMga->Options, OPTION_ACCELMETHOD); #endif pMga->NoAccel = FALSE; pMga->Exa = FALSE; #ifdef USE_EXA if (!xf86NameCmp(s, "EXA")) { pMga->Exa = TRUE; from = X_CONFIG; } #endif xf86DrvMsg(pScrn->scrnIndex, from, "Using %s acceleration\n", pMga->Exa ? "EXA" : "XAA"); } if (xf86ReturnOptValBool(pMga->Options, OPTION_PCI_RETRY, FALSE)) { pMga->UsePCIRetry = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "PCI retry enabled\n"); } if (xf86ReturnOptValBool(pMga->Options, OPTION_SYNC_ON_GREEN, FALSE)) { pMga->SyncOnGreen = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Sync-on-Green enabled\n"); } if (xf86ReturnOptValBool(pMga->Options, OPTION_SHOWCACHE, FALSE)) { pMga->ShowCache = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ShowCache enabled\n"); } if (xf86ReturnOptValBool(pMga->Options, OPTION_MGA_SDRAM, FALSE)) { pMga->HasSDRAM = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Has SDRAM\n"); } if (xf86GetOptValFreq(pMga->Options, OPTION_SET_MCLK, OPTUNITS_MHZ, &real)) { pMga->MemClk = (int)(real * 1000.0); } if(xf86GetOptValInteger(pMga->Options, OPTION_VIDEO_KEY, &(pMga->videoKey))) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "video key set to 0x%x\n", pMga->videoKey); } else { pMga->videoKey = (1 << pScrn->offset.red) | (1 << pScrn->offset.green) | (((pScrn->mask.blue >> pScrn->offset.blue) - 1) << pScrn->offset.blue); } if (xf86ReturnOptValBool(pMga->Options, OPTION_SHADOW_FB, FALSE)) { pMga->ShadowFB = TRUE; pMga->NoAccel = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Using \"Shadow Framebuffer\" - acceleration disabled\n"); } if (xf86ReturnOptValBool(pMga->Options, OPTION_OVERCLOCK_MEM, FALSE)) { pMga->OverclockMem = TRUE; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Overclocking memory\n"); } if (xf86ReturnOptValBool(pMga->Options, OPTION_TEXTURED_VIDEO, FALSE)) { pMga->TexturedVideo = TRUE; } if (xf86ReturnOptValBool(pMga->Options, OPTION_MERGEDFB, FALSE)) { if(!MGAISGx50(pMga)) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "\"Merged Framebuffer\" mode only supported on G450 and G550 boards.\n"); } else { { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "HALLib not loaded! NOT using \"Merged Framebuffer\" mode.\n"); } /* MGA_NOT_HAL */ } /* ISMGAGx50() */ } if (pMga->FBDev) { pScrn->SwitchMode = fbdevHWSwitchModeWeak(); pScrn->AdjustFrame = fbdevHWAdjustFrameWeak(); pScrn->EnterVT = MGAEnterVTFBDev; pScrn->LeaveVT = fbdevHWLeaveVTWeak(); pScrn->ValidMode = fbdevHWValidModeWeak(); } pMga->Rotate = 0; if ((s = xf86GetOptValString(pMga->Options, OPTION_ROTATE))) { if(!pMga->MergedFB) { if(!xf86NameCmp(s, "CW")) { pMga->ShadowFB = TRUE; pMga->NoAccel = TRUE; pMga->HWCursor = FALSE; pMga->Rotate = 1; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Rotating screen clockwise - acceleration disabled\n"); } else if(!xf86NameCmp(s, "CCW")) { pMga->ShadowFB = TRUE; pMga->NoAccel = TRUE; pMga->HWCursor = FALSE; pMga->Rotate = -1; xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Rotating screen counter clockwise - acceleration disabled\n"); } else { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "\"%s\" is not a valid value for Option \"Rotate\"\n", s); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Valid options are \"CW\" or \"CCW\"\n"); } } else { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, " -- Rotation disabled.\n"); } } /* Load XAA if needed */ if (!pMga->NoAccel) { #ifdef USE_EXA if (pMga->Exa) { if (!xf86LoadSubModule(pScrn, "exa")) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Falling back to shadowfb\n"); pMga->ShadowFB = TRUE; pMga->NoAccel = TRUE; } } else { #endif #ifdef USE_XAA if (!xf86LoadSubModule(pScrn, "xaa")) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Falling back to shadowfb\n"); pMga->ShadowFB = TRUE; pMga->NoAccel = TRUE; } #endif #ifdef USE_EXA } #endif } switch (pMga->Chipset) { case PCI_CHIP_MGA2064: case PCI_CHIP_MGA2164: case PCI_CHIP_MGA2164_AGP: MGA2064SetupFuncs(pScrn); break; case PCI_CHIP_MGA1064: case PCI_CHIP_MGAG100: case PCI_CHIP_MGAG100_PCI: case PCI_CHIP_MGAG200: case PCI_CHIP_MGAG200_PCI: case PCI_CHIP_MGAG200_SE_A_PCI: case PCI_CHIP_MGAG200_SE_B_PCI: case PCI_CHIP_MGAG200_WINBOND_PCI: case PCI_CHIP_MGAG200_EW3_PCI: case PCI_CHIP_MGAG200_EV_PCI: case PCI_CHIP_MGAG200_EH_PCI: case PCI_CHIP_MGAG200_ER_PCI: case PCI_CHIP_MGAG400: case PCI_CHIP_MGAG550: MGAGSetupFuncs(pScrn); break; } /* * Read the BIOS data struct */ #if defined(__alpha__) && !defined(XSERVER_LIBPCIACCESS) /* * Some old Digital-OEMed Matrox Millennium I cards have a VGA * disable switch. If the disable is on, we can't read the BIOS, * and pMga->BiosAddress = 0x0. The disable switch is needed to * allow multi-head operation with brain-dead console code... ;-} */ if ((pMga->BiosAddress == 0) && !xf86IsPrimaryPci(pMga->PciInfo)) xf86DrvMsg(pScrn->scrnIndex, pMga->BiosFrom, "BIOS not found, skipping read\n"); else #endif mga_read_and_process_bios( pScrn ); /* Since the BIOS can swap DACs during the initialisation of G550, we need to * store which DAC this instance of the driver is taking care of. This is done * by checking a flag stored in the ROM by the BIOS at a fixed address. */ if (!pMga->SecondCrtc) pMga->SecondOutput = FALSE; else pMga->SecondOutput = TRUE; if (pMga->Chipset == PCI_CHIP_MGAG550) { if (!pMga->SecondCrtc) { pMga->SecondOutput = (pMga->BiosOutputMode & 0x1) ? TRUE : FALSE; } else { pMga->SecondOutput = (pMga->BiosOutputMode & 0x1) ? FALSE : TRUE; } } /* HW bpp matches reported bpp */ pMga->HwBpp = pScrn->bitsPerPixel; /* * Reset card if it isn't primary one */ if ( (!pMga->Primary && !pMga->FBDev) ) MGASoftReset(pScrn); if (pScrn->videoRam == 0) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Unable to detect video RAM.\n"); return FALSE; } if (pMga->DualHeadEnabled) { /* This takes gives either half or 8 meg to the second head * whichever is less. */ if(pMga->SecondCrtc == FALSE) { Bool UseHalf = FALSE; int adjust; xf86GetOptValBool(pMga->Options, OPTION_CRTC2HALF, &UseHalf); adjust = pScrn->videoRam / 2; if (UseHalf == TRUE || xf86GetOptValInteger(pMga->Options, OPTION_CRTC2RAM, &adjust)) { xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Crtc2 will use %dK of VideoRam\n", adjust); } else { adjust = min(adjust, 8192); xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "Crtc2 will use %dK of VideoRam\n", adjust); } pMgaEnt->mastervideoRam = pScrn->videoRam - adjust; pScrn->videoRam = pMgaEnt->mastervideoRam; pMgaEnt->slavevideoRam = adjust; pMgaEnt->masterFbAddress = pMga->FbAddress; pMga->FbMapSize = pMgaEnt->masterFbMapSize = pScrn->videoRam * 1024; pMgaEnt->slaveFbAddress = pMga->FbAddress + pMgaEnt->masterFbMapSize; pMgaEnt->slaveFbMapSize = pMgaEnt->slavevideoRam * 1024; pMga->realSrcOrg = pMga->SrcOrg = 0; pMga->DstOrg = 0; } else { pMga->FbAddress = pMgaEnt->slaveFbAddress; pMga->FbMapSize = pMgaEnt->slaveFbMapSize; pScrn->videoRam = pMgaEnt->slavevideoRam; pMga->DstOrg = pMga->realSrcOrg = pMgaEnt->slaveFbAddress - pMgaEnt->masterFbAddress; pMga->SrcOrg = 0; /* This is not stored in hw format!! */ } pMgaEnt->refCount++; } else { /* Normal Handling of video ram etc */ pMga->FbMapSize = pScrn->videoRam * 1024; switch(pMga->Chipset) { case PCI_CHIP_MGAG550: case PCI_CHIP_MGAG400: case PCI_CHIP_MGAG200: case PCI_CHIP_MGAG200_PCI: case PCI_CHIP_MGAG200_SE_A_PCI: case PCI_CHIP_MGAG200_SE_B_PCI: case PCI_CHIP_MGAG200_WINBOND_PCI: case PCI_CHIP_MGAG200_EW3_PCI: case PCI_CHIP_MGAG200_EV_PCI: case PCI_CHIP_MGAG200_EH_PCI: case PCI_CHIP_MGAG200_ER_PCI: pMga->SrcOrg = 0; pMga->DstOrg = 0; break; default: break; } } xf86DrvMsg(pScrn->scrnIndex, from, "VideoRAM: %d kByte\n", pScrn->videoRam); /* Set the bpp shift value */ pMga->BppShifts[0] = 0; pMga->BppShifts[1] = 1; pMga->BppShifts[2] = 0; pMga->BppShifts[3] = 2; /* * fill MGAdac struct * Warning: currently, it should be after RAM counting */ (*pMga->PreInit)(pScrn); #if !defined(__powerpc__) /* Read and print the Monitor DDC info */ pScrn->monitor->DDC = MGAdoDDC(pScrn); #endif /* !__powerpc__ */ if (!pScrn->monitor->DDC && pMga->is_G200SE) { /* Jam in ranges big enough for 1024x768 */ if (!pScrn->monitor->nHsync) { pScrn->monitor->nHsync = 1; pScrn->monitor->hsync[0].lo = 31.5; pScrn->monitor->hsync[0].hi = 48.0; } if (!pScrn->monitor->nVrefresh) { pScrn->monitor->nVrefresh = 1; pScrn->monitor->vrefresh[0].lo = 56.0; pScrn->monitor->vrefresh[0].hi = 75.0; } } /* * If the driver can do gamma correction, it should call xf86SetGamma() * here. */ { Gamma zeros = {0.0, 0.0, 0.0}; if (!xf86SetGamma(pScrn, zeros)) { return FALSE; } } /* XXX Set HW cursor use */ /* Set the min pixel clock */ pMga->MinClock = 17750; if (pMga->is_G200WB){ pMga->MinClock = 18750; } xf86DrvMsg(pScrn->scrnIndex, X_DEFAULT, "Min pixel clock is %d MHz\n", pMga->MinClock / 1000); /* * If the user has specified ramdac speed in the XF86Config * file, we respect that setting. */ if (pMga->device->dacSpeeds[0]) { int speed = 0; switch (pScrn->bitsPerPixel) { case 8: speed = pMga->device->dacSpeeds[DAC_BPP8]; break; case 16: speed = pMga->device->dacSpeeds[DAC_BPP16]; break; case 24: speed = pMga->device->dacSpeeds[DAC_BPP24]; break; case 32: speed = pMga->device->dacSpeeds[DAC_BPP32]; break; } if (speed == 0) pMga->MaxClock = pMga->device->dacSpeeds[0]; else pMga->MaxClock = speed; from = X_CONFIG; } else { pMga->MaxClock = pMga->Dac.maxPixelClock; from = pMga->Dac.ClockFrom; } if(pMga->SecondCrtc == TRUE) { /* Override on 2nd crtc */ if ((pMga->ChipRev >= 0x80) || (pMga->Chipset == PCI_CHIP_MGAG550)) { /* G450, G550 */ pMga->MaxClock = 234000; } else { pMga->MaxClock = 135000; } } xf86DrvMsg(pScrn->scrnIndex, from, "Max pixel clock is %d MHz\n", pMga->MaxClock / 1000); /* * Setup the ClockRanges, which describe what clock ranges are available, * and what sort of modes they can be used for. */ clockRanges = xnfcalloc(sizeof(ClockRange), 1); clockRanges->next = NULL; clockRanges->minClock = pMga->MinClock; clockRanges->maxClock = pMga->MaxClock; clockRanges->clockIndex = -1; /* programmable */ clockRanges->interlaceAllowed = TRUE; clockRanges->doubleScanAllowed = TRUE; if (pMga->SecondCrtc == TRUE) clockRanges->interlaceAllowed = FALSE; clockRanges->ClockMulFactor = 1; clockRanges->ClockDivFactor = 1; /* Only set MemClk if appropriate for the ramdac */ if (pMga->Dac.SetMemClk) { if (pMga->MemClk == 0) { pMga->MemClk = pMga->Dac.MemoryClock; from = pMga->Dac.MemClkFrom; } else from = X_CONFIG; xf86DrvMsg(pScrn->scrnIndex, from, "MCLK used is %.1f MHz\n", pMga->MemClk / 1000.0); } /* * xf86ValidateModes will check that the mode HTotal and VTotal values * don't exceed the chipset's limit if pScrn->maxHValue and * pScrn->maxVValue are set. Since our MGAValidMode() already takes * care of this, we don't worry about setting them here. */ { int Pitches1[] = {640, 768, 800, 960, 1024, 1152, 1280, 1600, 1920, 2048, 0}; int Pitches2[] = {512, 640, 768, 800, 832, 960, 1024, 1152, 1280, 1600, 1664, 1920, 2048, 0}; int *linePitches = NULL; int minPitch = 256; int maxPitch = 2048; switch(pMga->Chipset) { case PCI_CHIP_MGA2064: if (!pMga->NoAccel) { linePitches = malloc(sizeof(Pitches1)); memcpy(linePitches, Pitches1, sizeof(Pitches1)); minPitch = maxPitch = 0; } break; case PCI_CHIP_MGA2164: case PCI_CHIP_MGA2164_AGP: case PCI_CHIP_MGA1064: if (!pMga->NoAccel) { linePitches = malloc(sizeof(Pitches2)); memcpy(linePitches, Pitches2, sizeof(Pitches2)); minPitch = maxPitch = 0; } break; case PCI_CHIP_MGAG100: case PCI_CHIP_MGAG100_PCI: maxPitch = 2048; break; case PCI_CHIP_MGAG200_SE_A_PCI: if (pScrn->videoRam < 2048){ maxPitch = 1280; } break; case PCI_CHIP_MGAG200: case PCI_CHIP_MGAG200_PCI: case PCI_CHIP_MGAG200_SE_B_PCI: case PCI_CHIP_MGAG200_WINBOND_PCI: case PCI_CHIP_MGAG200_EW3_PCI: case PCI_CHIP_MGAG200_EV_PCI: case PCI_CHIP_MGAG200_EH_PCI: case PCI_CHIP_MGAG200_ER_PCI: case PCI_CHIP_MGAG400: case PCI_CHIP_MGAG550: maxPitch = 4096; break; } i = xf86ValidateModes(pScrn, pScrn->monitor->Modes, pScrn->display->modes, clockRanges, linePitches, minPitch, maxPitch, pMga->Roundings[(pScrn->bitsPerPixel >> 3) - 1] * pScrn->bitsPerPixel, 128, 2048, pScrn->display->virtualX, pScrn->display->virtualY, pMga->FbMapSize, LOOKUP_BEST_REFRESH); free(linePitches); } if (i < 1 && pMga->FBDev) { fbdevHWUseBuildinMode(pScrn); pScrn->displayWidth = pScrn->virtualX; /* FIXME: might be wrong */ i = 1; } if (i == -1) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Validate Modes Failed\n"); MGAFreeRec(pScrn); return FALSE; } /* Prune the modes marked as invalid */ xf86PruneDriverModes(pScrn); if (i == 0 || pScrn->modes == NULL) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid modes found\n"); MGAFreeRec(pScrn); return FALSE; } /* If the Device section explicitly set HasSDRAM, don't bother checking. */ if (!pMga->HasSDRAM) { if ((pMga->softbooted || pMga->Primary) && pMga->chip_attribs->probe_for_sdram) { uint32_t option_reg; #ifdef XSERVER_LIBPCIACCESS pci_device_cfg_read_u32(pMga->PciInfo, & option_reg, PCI_OPTION_REG); #else option_reg = pciReadLong(pMga->PciTag, PCI_OPTION_REG); #endif pMga->HasSDRAM = ((option_reg & (1 << 14)) == 0); } else { pMga->HasSDRAM = pMga->chip_attribs->has_sdram; } if (pMga->HasSDRAM) { xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "Has SDRAM\n"); } } /* * Set the CRTC parameters for all of the modes based on the type * of mode, and the chipset's interlace requirements. * * Calling this is required if the mode->Crtc* values are used by the * driver and if the driver doesn't provide code to set them. They * are not pre-initialised at all. */ MGA_NOT_HAL(xf86SetCrtcForModes(pScrn, INTERLACE_HALVE_V)); /* Set the current mode to the first in the list */ pScrn->currentMode = pScrn->modes; /* Print the list of modes being used */ xf86PrintModes(pScrn); /* Set display resolution */ xf86SetDpi(pScrn, 0, 0); /* * Compute the byte offset into the linear frame buffer where the * frame buffer data should actually begin. According to DDK misc.c * line 1023, if more than 4MB is to be displayed, YDSTORG must be set * appropriately to align memory bank switching, and this requires a * corresponding offset on linear frame buffer access. * This is only needed for WRAM. */ pMga->YDstOrg = 0; if (pMga->chip_attribs->fb_4mb_quirk && (pScrn->virtualX * pScrn->virtualY * bytesPerPixel > 4*1024*1024)) { int offset; int offset_modulo = (pScrn->bitsPerPixel == 24) ? 12 : 4; int ydstorg_modulo = 64; if (pMga->Interleave) { offset_modulo <<= 1; ydstorg_modulo <<= 1; } offset = (4*1024*1024) % (pScrn->displayWidth * bytesPerPixel); pMga->YDstOrg = offset / bytesPerPixel; /* * When this was unconditional, it caused a line of horizontal garbage * at the middle right of the screen at the 4Meg boundary in 32bpp * (and presumably any other modes that use more than 4M). But it's * essential for 24bpp (it may not matter either way for 8bpp & 16bpp, * I'm not sure; I didn't notice problems when I checked with and * without.) * DRM Doug Merritt 12/97, submitted to XFree86 6/98 (oops) */ if (bytesPerPixel < 4) { while ((offset % offset_modulo) != 0 || (pMga->YDstOrg % ydstorg_modulo) != 0) { offset++; pMga->YDstOrg = offset / bytesPerPixel; } } } xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 2, "YDstOrg is set to %d\n", pMga->YDstOrg); if(pMga->DualHeadEnabled) { if(pMga->SecondCrtc == FALSE) { pMga->FbUsableSize = pMgaEnt->masterFbMapSize; /* Allocate HW cursor buffer at the end of video ram */ if( pMga->HWCursor && pMga->Dac.CursorOffscreenMemSize ) { if( pScrn->virtualY * pScrn->displayWidth * pScrn->bitsPerPixel / 8 <= pMga->FbUsableSize - pMga->Dac.CursorOffscreenMemSize ) { pMga->FbUsableSize -= pMga->Dac.CursorOffscreenMemSize; pMga->FbCursorOffset = pMgaEnt->masterFbMapSize - pMga->Dac.CursorOffscreenMemSize; } else { pMga->HWCursor = FALSE; xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "Too little offscreen memory for HW cursor; " "using SW cursor\n"); } } } else { /* Second CRTC */ pMga->FbUsableSize = pMgaEnt->slaveFbMapSize; pMga->HWCursor = FALSE; } } else { pMga->FbUsableSize = pMga->FbMapSize - pMga->YDstOrg * bytesPerPixel; /* Allocate HW cursor buffer at the end of video ram */ if( pMga->HWCursor && pMga->Dac.CursorOffscreenMemSize ) { if( pScrn->virtualY * pScrn->displayWidth * pScrn->bitsPerPixel / 8 <= pMga->FbUsableSize - pMga->Dac.CursorOffscreenMemSize ) { pMga->FbUsableSize -= pMga->Dac.CursorOffscreenMemSize; pMga->FbCursorOffset = pMga->FbMapSize - pMga->Dac.CursorOffscreenMemSize; } else { pMga->HWCursor = FALSE; xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "Too little offscreen memory for HW cursor; " "using SW cursor\n"); } } } /* * XXX This should be taken into account in some way in the mode valdation * section. */ /* Load the required framebuffer */ if (!xf86LoadSubModule(pScrn, "fb")) { MGAFreeRec(pScrn); return FALSE; } /* Load ramdac if needed */ if (pMga->HWCursor) { if (!xf86LoadSubModule(pScrn, "ramdac")) { MGAFreeRec(pScrn); return FALSE; } } /* Load shadowfb if needed */ if (pMga->ShadowFB) { if (!xf86LoadSubModule(pScrn, "shadowfb")) { MGAFreeRec(pScrn); return FALSE; } } #ifdef MGADRI /* Load the dri module if requested. */ if (xf86ReturnOptValBool(pMga->Options, OPTION_DRI, FALSE)) { xf86LoadSubModule(pScrn, "dri"); } #endif pMga->CurrentLayout.bitsPerPixel = pScrn->bitsPerPixel; pMga->CurrentLayout.depth = pScrn->depth; pMga->CurrentLayout.displayWidth = pScrn->displayWidth; pMga->CurrentLayout.weight.red = pScrn->weight.red; pMga->CurrentLayout.weight.green = pScrn->weight.green; pMga->CurrentLayout.weight.blue = pScrn->weight.blue; pMga->CurrentLayout.mode = pScrn->currentMode; if(pMga->MergedFB) { MGAPreInitMergedFB(pScrn,flags); }; xf86SetPrimInitDone(pScrn->entityList[0]); return TRUE; } /* * Map the framebuffer and MMIO memory. */ static Bool MGAMapMem(ScrnInfoPtr pScrn) { MGAPtr pMga = MGAPTR(pScrn); #ifdef XSERVER_LIBPCIACCESS struct pci_device *const dev = pMga->PciInfo; struct pci_mem_region *region; int i, err; #endif if (!pMga->FBDev) { #ifdef XSERVER_LIBPCIACCESS pciaddr_t fbaddr = pMga->FbAddress; pciaddr_t fbsize = pMga->FbMapSize; err = pci_device_map_range(dev, fbaddr, fbsize, PCI_DEV_MAP_FLAG_WRITABLE | PCI_DEV_MAP_FLAG_WRITE_COMBINE, (void **)&pMga->FbBase); if (err) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Unable to map Framebuffer %08llX %llx. %s (%d)\n", (long long)fbaddr, (long long)fbsize, strerror(err), err); return FALSE; } else xf86DrvMsg(pScrn->scrnIndex, X_INFO, "MAPPED Framebuffer %08llX %llx to %08llX.\n", (long long)fbaddr, (long long)fbsize, (long long)pMga->FbBase); if(pMga->entityPrivate == NULL || pMga->entityPrivate->mappedIOUsage == 0) { region = &dev->regions[pMga->io_bar]; err = pci_device_map_range(dev, region->base_addr, region->size, PCI_DEV_MAP_FLAG_WRITABLE, &pMga->IOBase); if (err) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Unable to map IO Region %i. %s (%d)\n", pMga->io_bar, strerror(err), err); return FALSE; } if(pMga->entityPrivate != NULL) pMga->entityPrivate->mappedIOBase = pMga->IOBase; } else pMga->IOBase = pMga->entityPrivate->mappedIOBase; if(pMga->entityPrivate != NULL) pMga->entityPrivate->mappedIOUsage ++; #else /* * For Alpha, we need to map SPARSE memory, since we need * byte/short access. This is taken care of automatically by the * os-support layer. */ pMga->IOBase = xf86MapPciMem(pScrn->scrnIndex, VIDMEM_MMIO | VIDMEM_READSIDEEFFECT, pMga->PciTag, pMga->IOAddress, 0x4000); if (pMga->IOBase == NULL) return FALSE; if (pMga->is_G200ER) { pMga->FbBase = xf86MapPciMem(pScrn->scrnIndex, VIDMEM_FRAMEBUFFER, pMga->PciTag, pMga->FbAddress, pMga->FbMapSize); } else { pMga->FbBase = xf86MapPciMem(pScrn->scrnIndex, VIDMEM_FRAMEBUFFER, pMga->PciTag, pMga->FbAddress, pMga->FbMapSize); } if (pMga->FbBase == NULL) return FALSE; #endif } else { pMga->FbBase = fbdevHWMapVidmem(pScrn); if (pMga->FbBase == NULL) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Unable to map framebuffer.\n"); return FALSE; } pMga->IOBase = fbdevHWMapMMIO(pScrn); if (pMga->IOBase == NULL) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Unable to map MMIO.\n"); return FALSE; } } pMga->FbStart = pMga->FbBase + pMga->YDstOrg * (pScrn->bitsPerPixel / 8); pMga->ILOADBase = NULL; if (pMga->iload_bar != -1) { #ifdef XSERVER_LIBPCIACCESS region = &dev->regions[pMga->iload_bar]; if(pMga->entityPrivate == NULL || pMga->entityPrivate->mappedILOADUsage == 0) { err = pci_device_map_range(dev, region->base_addr, region->size, PCI_DEV_MAP_FLAG_WRITABLE, (void *) &pMga->ILOADBase); if (err) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Unable to map BAR 2 (ILOAD region). %s (%d)\n", strerror(err), err); return FALSE; } if(pMga->entityPrivate != NULL) pMga->entityPrivate->mappedILOADBase = pMga->ILOADBase; } else pMga->ILOADBase = pMga->entityPrivate->mappedILOADBase; if(pMga->entityPrivate != NULL) pMga->entityPrivate->mappedILOADUsage ++; #else pMga->ILOADBase = xf86MapPciMem(pScrn->scrnIndex, VIDMEM_MMIO | VIDMEM_MMIO_32BIT | VIDMEM_READSIDEEFFECT, pMga->PciTag, pMga->ILOADAddress, 0x800000); #endif } return TRUE; } /* * Unmap the framebuffer and MMIO memory. */ static Bool MGAUnmapMem(ScrnInfoPtr pScrn) { MGAPtr pMga = MGAPTR(pScrn); #ifdef XSERVER_LIBPCIACCESS struct pci_device * const dev = pMga->PciInfo; #endif if (!pMga->FBDev) { #ifdef XSERVER_LIBPCIACCESS if(pMga->entityPrivate != NULL) pMga->entityPrivate->mappedIOUsage--; if(pMga->entityPrivate == NULL || pMga->entityPrivate->mappedIOUsage == 0) { pci_device_unmap_range(dev, pMga->IOBase, dev->regions[pMga->io_bar].size); if(pMga->entityPrivate != NULL) pMga->entityPrivate->mappedIOBase = NULL; } xf86DrvMsg(pScrn->scrnIndex, X_INFO, "UNMAPPING framebuffer 0x%08llX, 0x%llX.\n", (long long)pMga->FbBase, (long long)pMga->FbMapSize); pci_device_unmap_range(dev, pMga->FbBase, pMga->FbMapSize); #else xf86UnMapVidMem(pScrn->scrnIndex, (pointer)pMga->IOBase, 0x4000); xf86UnMapVidMem(pScrn->scrnIndex, (pointer)pMga->FbBase, pMga->FbMapSize); #endif } else { fbdevHWUnmapVidmem(pScrn); fbdevHWUnmapMMIO(pScrn); } if ((pMga->iload_bar != -1) && (pMga->ILOADBase != NULL)) { #ifdef XSERVER_LIBPCIACCESS if(pMga->entityPrivate != NULL) pMga->entityPrivate->mappedILOADUsage--; if(pMga->entityPrivate == NULL || pMga->entityPrivate->mappedILOADUsage == 0) { pci_device_unmap_range(dev, pMga->ILOADBase, dev->regions[pMga->iload_bar].size); if(pMga->entityPrivate != NULL) pMga->entityPrivate->mappedILOADBase = NULL; } #else xf86UnMapVidMem(pScrn->scrnIndex, (pointer)pMga->ILOADBase, 0x800000); #endif } pMga->IOBase = NULL; pMga->FbBase = NULL; pMga->FbStart = NULL; pMga->ILOADBase = NULL; return TRUE; } /* * This function saves the video state. */ static void MGASave(ScrnInfoPtr pScrn) { vgaHWPtr hwp = VGAHWPTR(pScrn); vgaRegPtr vgaReg = &hwp->SavedReg; MGAPtr pMga = MGAPTR(pScrn); MGARegPtr mgaReg = &pMga->SavedReg; if(pMga->SecondCrtc == TRUE) return; /* I need to save the registers for the second head also */ /* Save the register for 0x80 to 0xa0 */ /* Could call it dac2Saved */ /* Only save text mode fonts/text for the primary card */ (*pMga->Save)(pScrn, vgaReg, mgaReg, pMga->Primary); } /* * Initialise a new mode. This is currently still using the old * "initialise struct, restore/write struct to HW" model. That could * be changed. */ static Bool MGAModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode) { vgaHWPtr hwp = VGAHWPTR(pScrn); vgaRegPtr vgaReg; MGAPtr pMga = MGAPTR(pScrn); MGARegPtr mgaReg; vgaHWUnlock(hwp); /* if(pMga->MergedFB && mode && mode->Private && (mode->PrivSize == 0)) { mode = (DisplayModePtr)mode->Private; }*/ /* Initialise the ModeReg values */ if (!vgaHWInit(pScrn, mode)) return FALSE; pScrn->vtSema = TRUE; if (!(*pMga->ModeInit)(pScrn, mode)) return FALSE; /* Program the registers */ if (pMga->is_G200SE) { MGAG200SEHWProtect(pScrn, TRUE); } else { vgaHWProtect(pScrn, TRUE); } vgaReg = &hwp->ModeReg; mgaReg = &pMga->ModeReg; #ifdef MGADRI if (pMga->directRenderingEnabled) { DRILock(xf86ScrnToScreen(pScrn), 0); } #endif MGA_NOT_HAL((*pMga->Restore)(pScrn, vgaReg, mgaReg, FALSE)); MGAStormSync(pScrn); MGAStormEngineInit(pScrn); if (pMga->is_G200SE) { MGAG200SEHWProtect(pScrn,FALSE); } else { vgaHWProtect(pScrn, FALSE); } /* Reset tagfifo*/ if (pMga->is_G200ER) { CARD32 ulMemCtl = INREG(MGAREG_MEMCTL); CARD8 ucSeq1; xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Reset tagfifo\n"); /* Screen off */ OUTREG8(MGAREG_SEQ_INDEX, 0x01); /* Select SEQ1 */ ucSeq1 = INREG8(MGAREG_SEQ_DATA) | 0x20; OUTREG8(MGAREG_SEQ_DATA, ucSeq1); /* Reset tagfifo */ OUTREG(MGAREG_MEMCTL, ulMemCtl | 0x002000000); usleep(1000); /* wait 1ms */ OUTREG(MGAREG_MEMCTL, ulMemCtl & ~0x002000000); /* Screen on */ OUTREG8(MGAREG_SEQ_DATA, ucSeq1 & ~0x20); } /* This function optimize the Priority Request control Higher HiPriLvl will reduce drawing performance We need to give enough bandwith to crtc to avoid visual artifact */ if (pMga->is_G200SE) { if (pMga->reg_1e24 >= 0x02) { /* Calulate CRTC Priority value */ CARD8 ucHiPriLvl; CARD32 ulBitsPerPixel; CARD32 ulMemoryBandwidth; /* uiBitsPerPixel can only be 8,16 or32 */ if (pScrn->bitsPerPixel > 16) { ulBitsPerPixel = 32; } else if (pScrn->bitsPerPixel > 8) { ulBitsPerPixel = 16; } else { ulBitsPerPixel = 8; } ulMemoryBandwidth = (mode->Clock * ulBitsPerPixel) / 1000; if (ulMemoryBandwidth > 3100) ucHiPriLvl = 0; else if (ulMemoryBandwidth > 2600) ucHiPriLvl = 1; else if (ulMemoryBandwidth > 1900) ucHiPriLvl = 2; else if (ulMemoryBandwidth > 1160) ucHiPriLvl = 3; else if (ulMemoryBandwidth > 440) ucHiPriLvl = 4; else ucHiPriLvl = 5; OUTREG8(0x1FDE, 0x06); OUTREG8(0x1FDF, ucHiPriLvl); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Clock == %d\n", mode->Clock); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "BitsPerPixel == %d\n", pScrn->bitsPerPixel); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "MemoryBandwidth == %d\n", ulMemoryBandwidth); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "HiPriLvl == %02X\n", ucHiPriLvl); } else { MGA_NOT_HAL( xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Clock == %d\n", mode->Clock); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "BitsPerPixel == %d\n", pScrn->bitsPerPixel); OUTREG8(0x1FDE, 0x06); if (pMga->reg_1e24 >= 0x01) { OUTREG8(0x1FDF, 0x03); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "HiPriLvl == 03\n"); } else { OUTREG8(0x1FDF, 0x14); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "HiPriLvl == 14h\n"); } ); } } pMga->CurrentLayout.mode = mode; if(pMga->MergedFB && mode->Private && (mode->PrivSize == 0)) { pMga->M1currentMode = (DisplayModePtr)mode->Private; } #ifdef MGADRI if (pMga->directRenderingEnabled) DRIUnlock(xf86ScrnToScreen(pScrn)); #endif #ifdef DEBUG MGAG450PrintPLL(pScrn); #endif return TRUE; } static void MGARestoreSecondCrtc(ScrnInfoPtr pScrn) { MGAPtr pMga = MGAPTR(pScrn); if (MGAISGx50(pMga)) { /* Force to return in clone mode */ if (pMga->SecondOutput && (xf86IsEntityShared(pScrn->entityList[0]) || pMga->SecondCrtc) && !pMga->MergedFB) { /* Do this branch if * SecondOutput * and not Unshared Primary * and not Merged Mode (usualy means Unshared Primary) */ CARD8 ucXDispCtrl = inMGAdac(MGA1064_DISP_CTL); ucXDispCtrl &= ~MGA1064_DISP_CTL_DAC2OUTSEL_MASK; ucXDispCtrl |= MGA1064_DISP_CTL_DAC2OUTSEL_CRTC1; outMGAdac(MGA1064_DISP_CTL, ucXDispCtrl); } else { CARD8 ucXDispCtrl = inMGAdac(MGA1064_DISP_CTL); CARD32 ulC2CTL = INREG(MGAREG_C2CTL); ucXDispCtrl &= ~MGA1064_DISP_CTL_DAC2OUTSEL_MASK; ucXDispCtrl |= MGA1064_DISP_CTL_DAC1OUTSEL_EN; ucXDispCtrl |= MGA1064_DISP_CTL_DAC2OUTSEL_CRTC1; /* crtcdacsel -> crtc1 */ ulC2CTL &= ~MGAREG_C2CTL_CRTCDACSEL_CRTC2; ulC2CTL |= MGAREG_C2CTL_CRTCDACSEL_CRTC1; outMGAdac(MGA1064_DISP_CTL, ucXDispCtrl); OUTREG(MGAREG_C2CTL, ulC2CTL); } } else { /* Force to close second crtc */ CARD32 ulC2CTL = INREG(MGAREG_C2CTL); ulC2CTL &= ~MGAREG_C2CTL_C2_EN; OUTREG(MGAREG_C2CTL, ulC2CTL); } } /* * Restore the initial (text) mode. */ static void MGARestore(ScrnInfoPtr pScrn) { vgaHWPtr hwp = VGAHWPTR(pScrn); vgaRegPtr vgaReg = &hwp->SavedReg; MGAPtr pMga = MGAPTR(pScrn); MGARegPtr mgaReg = &pMga->SavedReg; if (pScrn->pScreen != NULL) MGAStormSync(pScrn); /* * Restore the second crtc if: * first and only driver entity * second entity * Merged Framebuffer mode (first and only driver entity) */ if((!xf86IsEntityShared(pScrn->entityList[0]) && !pMga->SecondCrtc) || pMga->SecondCrtc || pMga->MergedFB) { /* if(pMga->MergedFB) { if(pMga->pScrn2) MGARestoreSecondCrtc(pMga->pScrn2); } else*/ MGARestoreSecondCrtc(pScrn); /* if we are second instance of driver, we've done our job, exit */ if(pMga->SecondCrtc) return; } /* Only restore text mode fonts/text for the primary card */ if (pMga->is_G200SE) { MGAG200SEHWProtect(pScrn,TRUE); } else { vgaHWProtect(pScrn, TRUE); } if (pMga->Primary) { (*pMga->Restore)(pScrn, vgaReg, mgaReg, TRUE); } else { vgaHWRestore(pScrn, vgaReg, VGA_SR_MODE); } if (pMga->is_G200SE) { MGAG200SEHWProtect(pScrn,FALSE); } else { vgaHWProtect(pScrn,FALSE); } } /* Workaround for a G400 CRTC2 display problem */ static void MGACrtc2FillStrip(ScrnInfoPtr pScrn) { MGAPtr pMga = MGAPTR(pScrn); if (pMga->NoAccel) { /* Clears the whole screen, but ... */ bzero(pMga->FbStart, (pScrn->bitsPerPixel >> 3) * pScrn->displayWidth * pScrn->virtualY); } else { xf86SetLastScrnFlag(pScrn->entityList[0], pScrn->scrnIndex); #ifdef HAVE_XAA_H pMga->RestoreAccelState(pScrn); pMga->SetupForSolidFill(pScrn, 0, GXcopy, 0xFFFFFFFF); pMga->SubsequentSolidFillRect(pScrn, pScrn->virtualX, 0, pScrn->displayWidth - pScrn->virtualX, pScrn->virtualY); #endif MGAStormSync(pScrn); } } /* Mandatory */ /* This gets called at the start of each server generation */ static Bool MGAScreenInit(SCREEN_INIT_ARGS_DECL) { ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen); vgaHWPtr hwp; MGAPtr pMga; MGARamdacPtr MGAdac; int ret; VisualPtr visual; unsigned char *FBStart; int width, height, displayWidth; MGAEntPtr pMgaEnt = NULL; int f; CARD32 VRTemp, FBTemp; #ifdef MGADRI MessageType driFrom = X_DEFAULT; #endif DPMSSetProcPtr mga_dpms_set_proc = NULL; hwp = VGAHWPTR(pScrn); pMga = MGAPTR(pScrn); MGAdac = &pMga->Dac; if (pMga->is_G200SE) { VRTemp = pScrn->videoRam; FBTemp = pMga->FbMapSize; if (pMga->reg_1e24 >= 0x01) { pScrn->videoRam = 16384; } else { pScrn->videoRam = 8192; } pMga->FbMapSize = pScrn->videoRam * 1024; } /* Map the MGA memory and MMIO areas */ if (!MGAMapMem(pScrn)) return FALSE; /* Select functions that vary based on the CRTC configureation of the * screen. */ if (!pMga->MergedFB) { if (pMga->SecondCrtc) { mga_dpms_set_proc = MGADisplayPowerManagementSetCrtc2; pScreen->SaveScreen = MGASaveScreenCrtc2; } else { mga_dpms_set_proc = MGADisplayPowerManagementSet; pScreen->SaveScreen = MGASaveScreen; } } else { pScreen->SaveScreen = MGASaveScreenMerged; mga_dpms_set_proc = MGADisplayPowerManagementSetMerged; } if ((pMga->Chipset == PCI_CHIP_MGAG100) || (pMga->Chipset == PCI_CHIP_MGAG100_PCI)) MGAG100BlackMagic(pScrn); if (pMga->DualHeadEnabled) { DevUnion *pPriv; pPriv = xf86GetEntityPrivate(pScrn->entityList[0], MGAEntityIndex); pMgaEnt = pPriv->ptr; pMgaEnt->refCount++; } else { } if (pMga->is_G200SE) { pScrn->videoRam = VRTemp; pMga->FbMapSize = FBTemp; } /* Initialise the MMIO vgahw functions */ vgaHWSetMmioFuncs(hwp, pMga->IOBase, PORT_OFFSET); vgaHWGetIOBase(hwp); /* Map the VGA memory when the primary video */ if (!pMga->FBDev) { if (pMga->Primary) { hwp->MapSize = 0x10000; if (!vgaHWMapMem(pScrn)) return FALSE; } /* Save the current state */ MGASave(pScrn); /* Initialise the first mode */ if (!MGAModeInit(pScrn, pScrn->currentMode)) return FALSE; } else { fbdevHWSave(pScrn); /* Disable VGA core, and leave memory access on */ #ifdef XSERVER_LIBPCIACCESS pci_device_cfg_write_bits(pMga->PciInfo, 0x00000100, 0x00000000, PCI_OPTION_REG); #else pciSetBitsLong(pMga->PciTag, PCI_OPTION_REG, 0x100, 0x000); #endif if (!fbdevHWModeInit(pScrn, pScrn->currentMode)) return FALSE; if (!pMga->SecondCrtc && pMga->HWCursor && pMga->chip_attribs->hwcursor_1064) { outMGAdac(MGA1064_CURSOR_BASE_ADR_LOW, pMga->FbCursorOffset >> 10); outMGAdac(MGA1064_CURSOR_BASE_ADR_HI, pMga->FbCursorOffset >> 18); } MGAStormEngineInit(pScrn); } /* Darken the screen for aesthetic reasons and set the viewport */ (*pScreen->SaveScreen)(pScreen, SCREEN_SAVER_ON); pScrn->AdjustFrame(ADJUST_FRAME_ARGS(pScrn, pScrn->frameX0, pScrn->frameY0)); /* * The next step is to setup the screen's visuals, and initialise the * framebuffer code. In cases where the framebuffer's default * choices for things like visual layouts and bits per RGB are OK, * this may be as simple as calling the framebuffer's ScreenInit() * function. If not, the visuals will need to be setup before calling * a fb ScreenInit() function and fixed up after. * * For most PC hardware at depths >= 8, the defaults that cfb uses * are not appropriate. In this driver, we fixup the visuals after. */ /* * Reset the visual list. */ miClearVisualTypes(); /* Setup the visuals we support. */ /* All MGA support DirectColor */ if (pMga->SecondCrtc) { /* No DirectColor on the second head */ if (!miSetVisualTypes(pScrn->depth, TrueColorMask, pScrn->rgbBits, TrueColor)) return FALSE; if (!miSetPixmapDepths ()) return FALSE; } else { if (!xf86SetDefaultVisual(pScrn, -1)) return FALSE; if (!miSetVisualTypes(pScrn->depth, miGetDefaultVisualMask(pScrn->depth), pScrn->rgbBits, pScrn->defaultVisual)) return FALSE; if (!miSetPixmapDepths ()) return FALSE; } /* * Call the framebuffer layer's ScreenInit function, and fill in other * pScreen fields. */ width = pScrn->virtualX; height = pScrn->virtualY; displayWidth = pScrn->displayWidth; if(pMga->Rotate) { height = pScrn->virtualX; width = pScrn->virtualY; } if(pMga->ShadowFB) { pMga->ShadowPitch = BitmapBytePad(pScrn->bitsPerPixel * width); pMga->ShadowPtr = malloc(pMga->ShadowPitch * height); displayWidth = pMga->ShadowPitch / (pScrn->bitsPerPixel >> 3); FBStart = pMga->ShadowPtr; } else { pMga->ShadowPtr = NULL; FBStart = pMga->FbStart; } #ifdef MGADRI /* * Setup DRI after visuals have been established. * * The DRI does not work when textured video is enabled at this time. */ if (pMga->is_G200SE) { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Not supported by hardware, not initializing the DRI\n"); pMga->directRenderingEnabled = FALSE; driFrom = X_PROBED; } else if (!xf86ReturnOptValBool(pMga->Options, OPTION_DRI, TRUE)) { driFrom = X_CONFIG; } else if ( pMga->NoAccel ) { xf86DrvMsg( pScrn->scrnIndex, X_ERROR, "Acceleration disabled, not initializing the DRI\n" ); pMga->directRenderingEnabled = FALSE; driFrom = X_CONFIG; } else if ( pMga->TexturedVideo == TRUE ) { xf86DrvMsg( pScrn->scrnIndex, X_ERROR, "Textured video enabled, not initializing the DRI\n" ); pMga->directRenderingEnabled = FALSE; driFrom = X_CONFIG; } else if (pMga->SecondCrtc == TRUE) { xf86DrvMsg( pScrn->scrnIndex, X_ERROR, "Not initializing the DRI on the second head\n" ); pMga->directRenderingEnabled = FALSE; } else if ((pMga->FbMapSize / (width * (pScrn->bitsPerPixel >> 3))) <= height * 3) { xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Static buffer allocation failed, not initializing the DRI\n"); xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Need at least %d kB video memory at this resolution, bit depth\n", (3 * displayWidth * height * (pScrn->bitsPerPixel >> 3)) / 1024 ); pMga->directRenderingEnabled = FALSE; driFrom = X_PROBED; } else { pMga->directRenderingEnabled = MGADRIScreenInit(pScreen); } #endif if (!fbScreenInit(pScreen, FBStart, width, height, pScrn->xDpi, pScrn->yDpi, displayWidth, pScrn->bitsPerPixel)) { return FALSE; } if (pScrn->bitsPerPixel > 8) { /* Fixup RGB ordering */ visual = pScreen->visuals + pScreen->numVisuals; while (--visual >= pScreen->visuals) { if ((visual->class | DynamicClass) == DirectColor) { visual->offsetRed = pScrn->offset.red; visual->offsetGreen = pScrn->offset.green; visual->offsetBlue = pScrn->offset.blue; visual->redMask = pScrn->mask.red; visual->greenMask = pScrn->mask.green; visual->blueMask = pScrn->mask.blue; } } } /* must be after RGB ordering fixed */ fbPictureInit (pScreen, 0, 0); xf86SetBlackWhitePixels(pScreen); pMga->BlockHandler = pScreen->BlockHandler; pScreen->BlockHandler = MGABlockHandler; if(!pMga->ShadowFB) /* hardware cursor needs to wrap this layer */ MGADGAInit(pScreen); if (!pMga->NoAccel) { #ifdef USE_EXA if (pMga->Exa) mgaExaInit(pScreen); else #endif MGAStormAccelInit(pScreen); } xf86SetBackingStore(pScreen); xf86SetSilkenMouse(pScreen); /* Initialize software cursor. Must precede creation of the default colormap */ miDCInitialize(pScreen, xf86GetPointerScreenFuncs()); /* Initialize HW cursor layer. Must follow software cursor initialization*/ if (pMga->HWCursor) { if(!MGAHWCursorInit(pScreen)) xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Hardware cursor initialization failed\n"); } if(pMga->MergedFB) { /* Rotate and MergedFB are mutiualy exclusive, so we can use this * variable. */ if (!pMga->PointerMoved) pMga->PointerMoved = pScrn->PointerMoved; pScrn->PointerMoved = MGAMergePointerMoved; } /* Initialise default colourmap */ if (!miCreateDefColormap(pScreen)) return FALSE; /* Initialize colormap layer. Must follow initialization of the default colormap */ if (!pMga->SecondCrtc) f = CMAP_PALETTED_TRUECOLOR | CMAP_RELOAD_ON_MODE_SWITCH; else f = CMAP_RELOAD_ON_MODE_SWITCH; if(!xf86HandleColormaps(pScreen, 256, 8, pMga->FBDev ? fbdevHWLoadPaletteWeak() : MGAdac->LoadPalette, NULL, f)) return FALSE; if(pMga->ShadowFB) { RefreshAreaFuncPtr refreshArea = MGARefreshArea; if(pMga->Rotate) { if (!pMga->PointerMoved) { pMga->PointerMoved = pScrn->PointerMoved; pScrn->PointerMoved = MGAPointerMoved; } switch(pScrn->bitsPerPixel) { case 8: refreshArea = MGARefreshArea8; break; case 16: refreshArea = MGARefreshArea16; break; case 24: refreshArea = MGARefreshArea24; break; case 32: refreshArea = MGARefreshArea32; break; } } ShadowFBInit(pScreen, refreshArea); } xf86DPMSInit(pScreen, mga_dpms_set_proc, 0); pScrn->memPhysBase = pMga->FbAddress; pScrn->fbOffset = pMga->YDstOrg * (pScrn->bitsPerPixel / 8); MGAInitVideo(pScreen); #ifdef MGADRI if (pMga->directRenderingEnabled) { /* Now that mi, drm and others have done their thing, * complete the DRI setup. */ pMga->directRenderingEnabled = MGADRIFinishScreenInit(pScreen); } if (pMga->directRenderingEnabled) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Direct rendering enabled\n"); } else { xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Direct rendering disabled\n"); } if (pMga->DualHeadEnabled && pMga->SecondCrtc == FALSE) pMgaEnt->directRenderingEnabled = pMga->directRenderingEnabled; pMga->haveQuiescense = 1; #endif /* Wrap the current CloseScreen function */ pMga->CloseScreen = pScreen->CloseScreen; pScreen->CloseScreen = MGACloseScreen; /* Report any unused options (only for the first generation) */ if (serverGeneration == 1) { xf86ShowUnusedOptions(pScrn->scrnIndex, pScrn->options); } /* For the second head, work around display problem. */ if (!pMga->MergedFB && pMga->SecondCrtc) { MGACrtc2FillStrip(pScrn); } /* Done */ return TRUE; } /* Usually mandatory */ Bool MGASwitchMode(SWITCH_MODE_ARGS_DECL) { SCRN_INFO_PTR(arg); if (mode->Flags & 0x80000000) { return FALSE; } else return MGAModeInit(pScrn, mode); } /* Adjusts coordinates to match Panning granularity. * does nothing if the HALlib is not loaded */ void MGAAdjustGranularity(ScrnInfoPtr pScrn, int* x, int* y) { } /* * This function is used to initialize the Start Address - the first * displayed location in the video memory. */ /* Usually mandatory */ void MGAAdjustFrame(ADJUST_FRAME_ARGS_DECL) { SCRN_INFO_PTR(arg); int Base, tmp, count, last_vcount; MGAFBLayout *pLayout; MGAPtr pMga; pMga = MGAPTR(pScrn); pLayout = &pMga->CurrentLayout; /* wanted to improve panning granularity problems without risking * compatibility issues. Existing code looked hardware dependent. */ MGA_NOT_HAL( if(pMga->ShowCache && y && pScrn->vtSema) y += pScrn->virtualY - 1; Base = (y * pLayout->displayWidth + x + pMga->YDstOrg) >> (3 - pMga->BppShifts[(pLayout->bitsPerPixel >> 3) - 1]); if (pLayout->bitsPerPixel == 24) { if (pMga->Chipset == PCI_CHIP_MGAG400 || pMga->Chipset == PCI_CHIP_MGAG550) Base &= ~1; /*1 Not sure why */ Base *= 3; } /* find start of retrace */ while (INREG8(0x1FDA) & 0x08); while (!(INREG8(0x1FDA) & 0x08)); /* wait until we're past the start (fixseg.c in the DDK) */ last_vcount = INREG(MGAREG_VCOUNT); count = last_vcount + 2; while (1) { int vcount = INREG(MGAREG_VCOUNT); if (vcount >= count) break; if (vcount < last_vcount) break; last_vcount = vcount; } OUTREG16(MGAREG_CRTC_INDEX, (Base & 0x00FF00) | 0x0C); OUTREG16(MGAREG_CRTC_INDEX, ((Base & 0x0000FF) << 8) | 0x0D); OUTREG8(MGAREG_CRTCEXT_INDEX, 0x00); tmp = INREG8(MGAREG_CRTCEXT_DATA); OUTREG8(MGAREG_CRTCEXT_DATA, (tmp & 0xF0) | ((Base & 0x0F0000) >> 16)); ); } void MGAAdjustFrameCrtc2(ADJUST_FRAME_ARGS_DECL) { SCRN_INFO_PTR(arg); int Base; MGAFBLayout *pLayout; MGAPtr pMga; pMga = MGAPTR(pScrn); pLayout = &pMga->CurrentLayout; MGA_NOT_HAL( if(pMga->ShowCache && y && pScrn->vtSema) y += pScrn->virtualY - 1; /* 3-85 c2offset * 3-93 c2startadd0 * 3-96 c2vcount */ Base = (y * pLayout->displayWidth + x) * pLayout->bitsPerPixel >> 3; Base += pMga->DstOrg; Base &= 0x01ffffc0; OUTREG(MGAREG_C2STARTADD0, Base); ); } /* * This is called when VT switching back to the X server. Its job is * to reinitialise the video mode. * * We may wish to unmap video/MMIO memory too. */ /* Mandatory */ static Bool MGAEnterVT(VT_FUNC_ARGS_DECL) { SCRN_INFO_PTR(arg); MGAPtr pMga; pMga = MGAPTR(pScrn); #ifdef MGADRI if (pMga->directRenderingEnabled) { if (pMga->irq) { /* Need to make sure interrupts are enabled */ OUTREG(MGAREG_IEN, pMga->reg_ien); } DRIUnlock(xf86ScrnToScreen(pScrn)); } #endif if (!MGAModeInit(pScrn, pScrn->currentMode)) return FALSE; pScrn->AdjustFrame(ADJUST_FRAME_ARGS(pScrn, pScrn->frameX0, pScrn->frameY0)); /* For the second head, work around display problem. */ if (pMga->SecondCrtc) { MGACrtc2FillStrip(pScrn); } return TRUE; } static Bool MGAEnterVTFBDev(VT_FUNC_ARGS_DECL) { SCRN_INFO_PTR(arg); #ifdef MGADRI ScreenPtr pScreen; MGAPtr pMga; pMga = MGAPTR(pScrn); if (pMga->directRenderingEnabled) { pScreen = xf86ScrnToScreen(pScrn); DRIUnlock(pScreen); } #endif fbdevHWEnterVT(VT_FUNC_ARGS); MGAStormEngineInit(pScrn); return TRUE; } #define RESTORE_TEXTMODE_ON_DVI(x) \ if (MGAISGx50(x) && \ (ISDIGITAL1(x) || ISDIGITAL2(x))) { \ /* Reset DUALDVI register */ \ outMGAdac(MGA1064_DVI_PIPE_CTL, 0x0); \ /* Set Panel mode between 20 and 54 MHz */ \ outMGAdac(MGA1064_PAN_CTL, 0x7); \ } /* * This is called when VT switching away from the X server. Its job is * to restore the previous (text) mode. * * We may wish to remap video/MMIO memory too. */ /* Mandatory */ static void MGALeaveVT(VT_FUNC_ARGS_DECL) { SCRN_INFO_PTR(arg); vgaHWPtr hwp = VGAHWPTR(pScrn); #ifdef MGADRI MGAPtr pMga = MGAPTR(pScrn); ScreenPtr pScreen; #endif MGARestore(pScrn); vgaHWLock(hwp); #ifdef MGADRI if (pMga->directRenderingEnabled) { pScreen = xf86ScrnToScreen(pScrn); DRILock(pScreen, 0); } #endif } /* * This is called at the end of each server generation. It restores the * original (text) mode. It should also unmap the video memory, and free * any per-generation data allocated by the driver. It should finish * by unwrapping and calling the saved CloseScreen function. */ /* Mandatory */ static Bool MGACloseScreen(CLOSE_SCREEN_ARGS_DECL) { ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen); vgaHWPtr hwp = VGAHWPTR(pScrn); MGAPtr pMga = MGAPTR(pScrn); MGAEntPtr pMgaEnt = NULL; CARD32 VRTemp, FBTemp; if (pMga->MergedFB) MGACloseScreenMerged(pScreen); if (pMga->is_G200SE) { VRTemp = pScrn->videoRam; FBTemp = pMga->FbMapSize; if (pMga->reg_1e24 >= 0x01) { pScrn->videoRam = 16384; } else { pScrn->videoRam = 8192; } pMga->FbMapSize = pScrn->videoRam * 1024; } if (pScrn->vtSema) { if (pMga->FBDev) { fbdevHWRestore(pScrn); MGAUnmapMem(pScrn); } else { MGARestore(pScrn); vgaHWLock(hwp); MGAUnmapMem(pScrn); vgaHWUnmapMem(pScrn); } } if (pMga->is_G200SE) { pScrn->videoRam = VRTemp; pMga->FbMapSize = FBTemp; } #ifdef MGADRI if (pMga->directRenderingEnabled) { MGADRICloseScreen(pScreen); pMga->directRenderingEnabled=FALSE; } #endif if (pMga->DualHeadEnabled) { DevUnion *pPriv; pPriv = xf86GetEntityPrivate(pScrn->entityList[0], MGAEntityIndex); pMgaEnt = pPriv->ptr; pMgaEnt->refCount--; } #ifdef USE_XAA if (pMga->AccelInfoRec) XAADestroyInfoRec(pMga->AccelInfoRec); #endif #ifdef USE_EXA if (pMga->ExaDriver) { exaDriverFini(pScreen); free(pMga->ExaDriver); } #endif if (pMga->CursorInfoRec) xf86DestroyCursorInfoRec(pMga->CursorInfoRec); free(pMga->ShadowPtr); free(pMga->DGAModes); free(pMga->adaptor); free(pMga->portPrivate); free(pMga->ScratchBuffer); pScrn->vtSema = FALSE; xf86ClearPrimInitDone(pScrn->entityList[0]); if(pMga->BlockHandler) pScreen->BlockHandler = pMga->BlockHandler; pScreen->CloseScreen = pMga->CloseScreen; return (*pScreen->CloseScreen)(CLOSE_SCREEN_ARGS); } /* Free up any persistent data structures */ /* Optional */ static void MGAFreeScreen(FREE_SCREEN_ARGS_DECL) { SCRN_INFO_PTR(arg); /* * This only gets called when a screen is being deleted. It does not * get called routinely at the end of a server generation. */ if (xf86LoaderCheckSymbol("vgaHWFreeHWRec")) vgaHWFreeHWRec(pScrn); MGAFreeRec(pScrn); } #ifndef HAVE_XF86MODEBANDWIDTH #define MODE_BANDWIDTH MODE_BAD /** Calculates the memory bandwidth (in MiB/sec) of a mode. */ static unsigned int xf86ModeBandwidth(DisplayModePtr mode, int depth) { float a_active, a_total, active_percent, pixels_per_second; int bytes_per_pixel = (depth + 7) / 8; if (!mode->HTotal || !mode->VTotal || !mode->Clock) return 0; a_active = mode->HDisplay * mode->VDisplay; a_total = mode->HTotal * mode->VTotal; active_percent = a_active / a_total; pixels_per_second = active_percent * mode->Clock * 1000.0; return (unsigned int)(pixels_per_second * bytes_per_pixel / (1024 * 1024)); } #endif /* Checks if a mode is suitable for the selected chipset. */ /* Optional */ static ModeStatus MGAValidMode(SCRN_ARG_TYPE arg, DisplayModePtr mode, Bool verbose, int flags) { SCRN_INFO_PTR(arg); int lace; MGAPtr pMga = MGAPTR(pScrn); if (pMga->Chipset == PCI_CHIP_MGAG200_SE_A_PCI) { if (pMga->reg_1e24 == 0x01) { if (mode->HDisplay > 1600) return MODE_VIRTUAL_X; if (mode->VDisplay > 1200) return MODE_VIRTUAL_Y; if (xf86ModeBandwidth(mode, pScrn->bitsPerPixel) > 244) return MODE_BANDWIDTH; } else { if (pMga->reg_1e24 == 0x02) { if (mode->HDisplay > 1920) return MODE_VIRTUAL_X; if (mode->VDisplay > 1200) return MODE_VIRTUAL_Y; if (xf86ModeBandwidth(mode, pScrn->bitsPerPixel) > 301) return MODE_BANDWIDTH; } } } else if (pMga->is_G200WB){ if (mode->Flags & V_DBLSCAN) return MODE_NO_DBLESCAN; if (pMga->Chipset != PCI_CHIP_MGAG200_EW3_PCI) { if (pMga->KVM && mode->HDisplay > 1280) return MODE_VIRTUAL_X; if (pMga->KVM && mode->VDisplay > 1024) return MODE_VIRTUAL_Y; if (xf86ModeBandwidth(mode, pScrn->bitsPerPixel) > 318.77) return MODE_BANDWIDTH; } } else if (pMga->is_G200EV && (xf86ModeBandwidth(mode, pScrn->bitsPerPixel) > 327)) { return MODE_BANDWIDTH; } else if (pMga->is_G200EH && (xf86ModeBandwidth(mode, pScrn->bitsPerPixel) > 375)) { return MODE_BANDWIDTH; } else if (pMga->is_G200ER && (xf86ModeBandwidth(mode, pScrn->bitsPerPixel) > 550)) { return MODE_BANDWIDTH; } lace = 1 + ((mode->Flags & V_INTERLACE) != 0); if ((mode->CrtcHDisplay <= 2048) && (mode->CrtcHSyncStart <= 4096) && (mode->CrtcHSyncEnd <= 4096) && (mode->CrtcHTotal <= 4096) && (mode->CrtcVDisplay <= 2048 * lace) && (mode->CrtcVSyncStart <= 4096 * lace) && (mode->CrtcVSyncEnd <= 4096 * lace) && (mode->CrtcVTotal <= 4096 * lace)) { /* Can't have horizontal panning for second head of G400 */ if (pMga->SecondCrtc) { if (flags == MODECHECK_FINAL) { if (pMga->allowedWidth == 0) pMga->allowedWidth = pScrn->virtualX; if (mode->HDisplay != pMga->allowedWidth) return(MODE_ONE_WIDTH); } } return(MODE_OK); } else { return(MODE_BAD); } } /* * This routine is required but since we can't easily blank the * second display without risking powering off the monitor, return * FALSE and let the X server do something generic. */ static Bool MGASaveScreenCrtc2(ScreenPtr pScreen, int mode) { return FALSE; } /* Do screen blanking */ static Bool MGASaveScreen(ScreenPtr pScreen, int mode) { return vgaHWSaveScreen(pScreen, mode); } /* * MGADisplayPowerManagementSet -- * * Sets VESA Display Power Management Signaling (DPMS) Mode. * * XXX This needs fixing for sync-on-green! */ void MGADisplayPowerManagementSet(ScrnInfoPtr pScrn, int PowerManagementMode, int flags) { MGAPtr pMga = MGAPTR(pScrn); unsigned char seq1 = 0, crtcext1 = 0; switch (PowerManagementMode) { case DPMSModeOn: /* Screen: On; HSync: On, VSync: On */ seq1 = 0x00; crtcext1 = 0x00; break; case DPMSModeStandby: /* Screen: Off; HSync: Off, VSync: On */ seq1 = 0x20; crtcext1 = 0x10; break; case DPMSModeSuspend: /* Screen: Off; HSync: On, VSync: Off */ seq1 = 0x20; crtcext1 = 0x20; break; case DPMSModeOff: /* Screen: Off; HSync: Off, VSync: Off */ seq1 = 0x20; crtcext1 = 0x30; break; } /* XXX Prefer an implementation that doesn't depend on VGA specifics */ OUTREG8(MGAREG_SEQ_INDEX, 0x01); /* Select SEQ1 */ seq1 |= INREG8(MGAREG_SEQ_DATA) & ~0x20; MGAWAITVSYNC(); MGAWAITBUSY(); OUTREG8(MGAREG_SEQ_DATA, seq1); usleep(20000); OUTREG8(MGAREG_CRTCEXT_INDEX, 0x01); /* Select CRTCEXT1 */ crtcext1 |= INREG8(MGAREG_CRTCEXT_DATA) & ~0x30; OUTREG8(MGAREG_CRTCEXT_DATA, crtcext1); } void MGADisplayPowerManagementSetCrtc2(ScrnInfoPtr pScrn, int PowerManagementMode, int flags) { MGAPtr pMga = MGAPTR(pScrn); CARD32 val = INREG(MGAREG_C2CTL); if (PowerManagementMode==DPMSModeOn) { /* Enable CRTC2 */ val |= MGAREG_C2CTL_C2_EN; val &= ~MGAREG_C2CTL_PIXCLKDIS_DISABLE; OUTREG(MGAREG_C2CTL, val); /* Restore normal MAVEN values */ if (pMga->Maven) { /* if TV MODE -- for later implementation MAVW(MONEN, 0xb3); MAVW(MONSET, 0x20); MAVW(OUTMODE, 0x08); output: SVideo/Composite MAVW(STABLE, 0x02); makes picture stable? fixme? linux uses 0x14... MAVW(TEST, (MAVR(TEST) & 0x10)); */ /* else monitor mode */ xf86I2CWriteByte(pMga->Maven, MGAMAV_MONEN, 0xb2); /* must be set to this in monitor mode */ xf86I2CWriteByte(pMga->Maven, MGAMAV_MONSET, 0x20); /* output: monitor mode */ xf86I2CWriteByte(pMga->Maven, MGAMAV_OUTMODE, 0x03); /* makes picture stable? */ xf86I2CWriteByte(pMga->Maven, MGAMAV_STABLE, 0x22); /* turn off test signal */ xf86I2CWriteByte(pMga->Maven, MGAMAV_TEST, 0x00); } } else { /* Disable CRTC2 video */ val |= MGAREG_C2CTL_PIXCLKDIS_DISABLE; val &= ~MGAREG_C2CTL_C2_EN; OUTREG(MGAREG_C2CTL, val); /* Disable MAVEN display */ if (pMga->Maven) { /* In order to blank the 2nd display, we must set some MAVEN registers. * It seems that not always the same values work on different hardware so * we try a few different (possibly redundant) ones. */ /* xf86I2CWriteByte(pMga->Maven, MGAMAV_STABLE, 0x6a); */ /* xf86I2CWriteByte(pMga->Maven, MGAMAV_TEST, 0x03); */ /* xf86I2CWriteByte(pMga->Maven, MGAMAV_TEST, 0x10); */ xf86I2CWriteByte(pMga->Maven, MGAMAV_OUTMODE, 0x80); } } } static void MGABlockHandler (BLOCKHANDLER_ARGS_DECL) { SCREEN_PTR(arg); ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen); MGAPtr pMga = MGAPTR(pScrn); if(pMga->PaletteLoadCallback) (*pMga->PaletteLoadCallback)(pScrn); pScreen->BlockHandler = pMga->BlockHandler; (*pScreen->BlockHandler) (BLOCKHANDLER_ARGS); pScreen->BlockHandler = MGABlockHandler; if(pMga->VideoTimerCallback) { UpdateCurrentTime(); (*pMga->VideoTimerCallback)(pScrn, currentTime.milliseconds); } if(pMga->RenderCallback) (*pMga->RenderCallback)(pScrn); } #if defined (EXTRADEBUG) /* * some functions to track input/output in the server */ CARD8 MGAdbg_inreg8(ScrnInfoPtr pScrn,int addr,int verbose, char* func) { CARD8 ret; ret = MMIO_IN8(MGAPTR(pScrn)->IOBase,addr); if(verbose) xf86DrvMsg(pScrn->scrnIndex, X_INFO, "inreg8 : %s: 0x%8x = 0x%x\n",func, addr,ret); return ret; } CARD16 MGAdbg_inreg16(ScrnInfoPtr pScrn,int addr,int verbose, char* func) { CARD16 ret; ret = MMIO_IN16(MGAPTR(pScrn)->IOBase,addr); if(verbose) xf86DrvMsg(pScrn->scrnIndex, X_INFO, "inreg16: %s: 0x%8x = 0x%x\n",func, addr,ret); return ret; } CARD32 MGAdbg_inreg32(ScrnInfoPtr pScrn,int addr,int verbose, char* func) { CARD32 ret; ret = MMIO_IN32(MGAPTR(pScrn)->IOBase,addr); if(verbose) xf86DrvMsg(pScrn->scrnIndex, X_INFO, "inreg32: %s: 0x%8x = 0x%x\n",func, addr,ret); return ret; } void MGAdbg_outreg8(ScrnInfoPtr pScrn,int addr,int val, char* func) { CARD8 ret; #if 0 if( addr = MGAREG_CRTCEXT_DATA ) return; #endif if( addr != 0x3c00 ) { ret = MGAdbg_inreg8(pScrn,addr,0,func); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "outreg8 : %s: 0x%8x = 0x%x was 0x%x\n", func,addr,val,ret); } else { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "outreg8 : %s: index 0x%x\n", func,val); } MMIO_OUT8(MGAPTR(pScrn)->IOBase,addr,val); } void MGAdbg_outreg16(ScrnInfoPtr pScrn,int addr,int val, char* func) { CARD16 ret; #if 0 if (addr == MGAREG_CRTCEXT_INDEX) return; #endif ret = MGAdbg_inreg16(pScrn,addr,0, func); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "outreg16: %s: 0x%8x = 0x%x was 0x%x\n", func,addr,val,ret); MMIO_OUT16(MGAPTR(pScrn)->IOBase,addr,val); } void MGAdbg_outreg32(ScrnInfoPtr pScrn,int addr,int val, char* func) { CARD32 ret; if (((addr & 0xff00) == 0x1c00) && (addr != 0x1c04) /* && (addr != 0x1c1c) */ && (addr != 0x1c20) && (addr != 0x1c24) && (addr != 0x1c80) && (addr != 0x1c8c) && (addr != 0x1c94) && (addr != 0x1c98) && (addr != 0x1c9c) ) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "%s: refused address 0x%x\n", func,addr); return; } ret = MGAdbg_inreg32(pScrn,addr,0, func); xf86DrvMsg(pScrn->scrnIndex, X_INFO, "outreg32: %s: 0x%8x = 0x%x was 0x%x\n", func,addr,val,ret); MMIO_OUT32(MGAPTR(pScrn)->IOBase,addr,val); } #endif /* DEBUG */ static void MGAG100BlackMagic(ScrnInfoPtr pScrn) { MGAPtr pMga = MGAPTR(pScrn); OUTREG(MGAREG_PLNWT, ~(CARD32)0x0); /* reset memory */ OUTREG(MGAREG_MACCESS, 1<<15); usleep(10); }