Age | Commit message (Collapse) | Author |
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/22>
|
|
nv will refuse to work whenever there's a driver other than vga attached to
the device we're trying to probe, yet nv works fine on top of gffb or
genfb on NetBSD
Signed-off-by: Nia Alarie <nia@NetBSD.org>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/20>
|
|
Helps identifying displays on non-x86 hardware.
Patch from Michael Lorenz, autotools'ified by me.
Signed-off-by: Nia Alarie <nia@NetBSD.org>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/19>
|
|
This is gt216 which is a close relative of my gt218 but...it should
be closer to the rest of the chipsets enough to work hopefully.
Signed-off-by: Yusuf Khan <yusisamerican@gmail.com>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/16>
|
|
See src/common/nvswitch/kernel/inc/rom_nvswitch.h in open-gpu-kernel-modules
Signed-off-by: Yusuf Khan <yusisamerican@gmail.com>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/16>
|
|
Signed-off-by: Yusuf Khan <yusisamerican@gmail.com>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/16>
|
|
Signed-off-by: Yusuf Khan <yusisamerican@gmail.com>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/16>
|
|
xnfcalloc is just an alias for XNFcallocarray() that doesn't seem to serve
any practical purpose, so it can go away once all drivers stopped using it.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/18>
|
|
xnfalloc is just an alias for XNFalloc() that doesn't seem to serve
any practical purpose, so it can go away once all drivers stopped using it.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/18>
|
|
inspired by a bugzilla patch:
"nv-2.1.12 : patch to add the latest and a lot of Nvidia CPUs (56) (until February 2009)"
Signed-off-by: Yusuf Khan <yusisamerican@gmail.com>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/17>
|
|
Signed-off-by: Yusuf Khan <yusisamerican@gmail.com>
Part-of: <https://gitlab.freedesktop.org/xorg/driver/xf86-video-nv/-/merge_requests/15>
|
|
I think the latest version of gcc got stricter in regards to this
for some reason.
Signed-off-by: Yusuf Khan <yusisamerican@gmail.com>
|
|
Handles warning from Oracle Parfait static analyser:
Error: Misleading macro
Misleading macro [misleading-macro]:
misleading evaluation of unary '-' operator in expansion of macro ABS due to missing parentheses
at line 104 of src/riva_hw.c.
binary '+' operator has lower precedence than unary '-' operator inside macro body at line 298
if (ABS(ainfo->vburst_size) + (ABS(ainfo->wcvlwm + 32) & ~0xf) - tmp> VFIFO_SIZE)
low precedence binary '+' operator is hidden by expansion of macro argument a at line 104
#define ABS(a) (a>0?a:-a)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
The API was removed by Xserver commit dd00e5466a0e4ea313d1860824da4123692827ed
in xorg-server-1.20.0 and later.
Found by gcc -Werror=implicit:
riva_driver.c: In function ‘RivaScreenInit’:
riva_driver.c:1213:12: error: implicit declaration of function
‘xf86DisableRandR’; did you mean ‘xf86DisableIO’?
[-Werror=implicit-function-declaration]
1213 | xf86DisableRandR();
| ^~~~~~~~~~~~~~~~
| xf86DisableIO
nv_driver.c: In function ‘NVScreenInit’:
nv_driver.c:2635:16: error: implicit declaration of function
‘xf86DisableRandR’; did you mean ‘xf86DisableIO’?
[-Werror=implicit-function-declaration]
2635 | xf86DisableRandR();
| ^~~~~~~~~~~~~~~~
| xf86DisableIO
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Written by either Julio Merino <julio at meroh.net> or Nathan Whitehorn
<nwhitehorn at freebsd.org> (emails obfuscated similar to freebsd
convention, authorship is in doubt)
|
|
Fixes gcc warnings:
riva_xaa.c: In function ‘RivaSetRopPattern’:
riva_xaa.c:94:33: warning: implicit declaration of function
‘XAAGetPatternROP’; did you mean ‘RivaSetPattern’?
[-Wimplicit-function-declaration]
pRiva->riva.Rop->Rop3 = XAAGetPatternROP(rop);
^~~~~~~~~~~~~~~~
RivaSetPattern
At top level:
riva_xaa.c:89:1: warning: ‘RivaSetRopPattern’ defined but not used
[-Wunused-function]
RivaSetRopPattern(RivaPtr pRiva, int rop)
^~~~~~~~~~~~~~~~~
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: YusufKhan-improves-things's avatarYusuf Khan <yusisamerican@gmail.com>
---
v2: Add header to Makefile
v3: commit v2
|
|
Found by using:
codespell --builtin clear,rare,usage,informal,code,names
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
Makes it possible to run the nv driver without XAA on cards where
EXA is not supported.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Adam Jackson <ajax@redhat.com>
|
|
The NV driver did never set the VGA IOBase for those registers which
have different addresses dependent whether the VGA engine is running in
mono or color mode.
This has not been detected as the VGA mode and font save/restore
functions initialize this value themselves.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
|
|
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This allows nv to build without XAA.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
Fall back to NoAccel on G80 since there's no shadowfb support there,
otherwise fall to shadowfb.
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
Remove duplicated includes of guarded headers.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Get rid of this with CFLAGS="-Wall -Werror":
| CC g80_display.lo
| cc1: warnings being treated as errors
| g80_display.c: In function ‘G80CrtcSetPClk’:
| g80_display.c:216: error: unused variable ‘i’
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
|
|
RANDR_12_INTERFACE is defined in xserver/randr/randstr.h since version 1.2.
This driver only configures against xserver 1.3 or higher.
Reported-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|
|
|
|
This was used at one point in time to backport the modes code from server
1.3 to server 1.2. When the tarball was created, whatever modes code
was on the developer disk was included.
The server 1.2 as shipped in the tarball on the web does not contain the
modes code. It was added just after and found in git branch server-1.2-branch.
The modes code was initially included in version 2.0.95 and still compiles
with server 1.2. As of version 2.1.9 it no longer compiles.
Subsequent versions are not backward compatible and probably not meant to be.
The XRandR wiki points to articles saying that XRandR 1.2 first appeared in
server 1.3 and nv 2.0.95. Given that modes code in current server version
does not compile with server 1.2, and that the modes code is included in
version 1.3 and up, might as well stop including this modes code in the driver.
This patch makes the driver requiring server 1.3 or later.
This will solve the issue where "make dist" fails "out of the box"
and requires manual fix-up on the build machine which is documented
in the compat/README file.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Based on a suggestion from Renzo <rfabriek@nerdshack.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Commit 3e9f7704122e0685ce83f7d3d3630e8a07293671 added printouts when the driver
detects that a kernel module is attached to the given PCI device. However, it
uses ErrorF and doesn't print any identifying information about *which* device
has the problem or even which driver is complaining. Fix it to use xf86DrvMsg
and print the driver name and PCI device and bus IDs.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|
|
It was superseded by 3e9f7704122e0685ce83f7d3d3630e8a07293671, which depends on
libpciaccess and not libdrm. This is better, because the server already depends
on the former, while the latter is optional.
This reverts commit 17ab5dbea69e690cbf78c25040db518471e0887f.
Conflicts:
src/nv_driver.c
|
|
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
|
|
Touching directly the hardware while kernel modesetting is active
breaks console output.
Patch almost entrirely based on VESA patch by
Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Use the official names for 10DE:053B and 10DE:053E. Add some additional
product IDs and update the documentation.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
|