From 6265b77dc8878e36abd76b73e209a2d76d70ba22 Mon Sep 17 00:00:00 2001 From: Mark Vojkovich Date: Thu, 29 Jun 2006 18:41:44 -0700 Subject: New chip support and new PCI IDs. --- man/nv.man | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'man') diff --git a/man/nv.man b/man/nv.man index 9747bc4..83d20ae 100644 --- a/man/nv.man +++ b/man/nv.man @@ -1,4 +1,4 @@ -.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/nv/nv.man,v 1.29 2006/01/21 01:17:59 mvojkovi Exp $ +.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/nv/nv.man,v 1.30 2006/06/16 00:19:32 mvojkovi Exp $ .\" shorthand for double quote that works everywhere. .ds q \N'34' .TH NV __drivermansuffix__ __vendorversion__ @@ -24,7 +24,7 @@ the Riva128 which only supports TrueColor in the higher depths. .SH SUPPORTED HARDWARE The .B nv -driver supports PCI and AGP video cards based on the following NVIDIA chips: +driver supports PCI, PCI-Express and AGP video cards based on the following NVIDIA chips: .TP 22 .B RIVA 128 NV3 @@ -78,13 +78,12 @@ Enable or disable the HW cursor. Default: on. Disable or enable acceleration. Default: acceleration is enabled. .TP .BI "Option \*qUseFBDev\*q \*q" boolean \*q -Enable or disable use of on OS-specific fb interface (and is not supported +Enable or disable use of an OS-specific fb interface (and is not supported on all OSs). See fbdevhw(__drivermansuffix__) for further information. Default: off. .TP .BI "Option \*qCrtcNumber\*q \*q" integer \*q -GeForce2 MX, nForce2, Quadro4, GeForce4, Quadro FX and GeForce FX -may have two video outputs. +Many graphics cards with NVIDIA chips have two video outputs. The driver attempts to autodetect which one the monitor is connected to. In the case that autodetection picks the wrong one, this option may be used to force usage of a particular output. @@ -95,22 +94,21 @@ Default: autodetected. The driver usually can autodetect the presence of a digital flat panel. In the case that this fails, this option can be used to force the driver to treat the attached device as a digital flat panel. With this -driver, a digital flat panel will only work if it was POSTed by the BIOS, -that is, the -machine must have booted to the panel. If you have a dual head card +driver, a digital flat panel will work only if it was POSTed by the BIOS, +that is, the computer +must have booted to the panel. If you have a dual head card you may also need to set the option CrtcNumber described above. -Default: off. +Default: autodetected. .TP .BI "Option \*qFPDither\*q \*q" boolean \*q Many digital flat panels (particularly ones on laptops) have only 6 bits per component color resolution. This option tells the driver to dither from 8 bits per component to 6 before -the flat panel truncates it. This is only supported in depth 24 on GeForce2 MX, -nForce2, GeForce4, Quadro4, Geforce FX and Quadro FX. +the flat panel truncates it. Default: off. .TP .BI "Option \*qFPScale\*q \*q" boolean \*q -Supported only on GeForce4, Quadro4, Geforce FX and Quadro FX. This option +Supported only on GeForce4 and newer chips, this option tells to the driver to scale lower resolutions up to the flat panel's native resolution. Default: on. .TP -- cgit v1.2.3