.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/nv/nv.man,v 1.23 2004/01/10 22:31:53 mvojkovi Exp $ .\" shorthand for double quote that works everywhere. .ds q \N'34' .TH NV __drivermansuffix__ __vendorversion__ .SH NAME nv \- NVIDIA video driver .SH SYNOPSIS .nf .B "Section \*qDevice\*q" .BI " Identifier \*q" devname \*q .B " Driver \*qnv\*q" \ \ ... .B EndSection .fi .SH DESCRIPTION .B nv is an XFree86 driver for NVIDIA video cards. The driver supports 2D acceleration and provides support for the following framebuffer depths: 8, 15, 16 (except Riva128) and 24. All visual types are supported for depth 8, TrueColor and DirectColor visuals are supported for the other depths with the exception of the Riva128 which only supports TrueColor in the higher depths. .SH SUPPORTED HARDWARE The .B nv driver supports PCI and AGP video cards based on the following NVIDIA chips: .TP 22 .B RIVA 128 NV3 .TP 22 .B RIVA TNT NV4 .TP 22 .B RIVA TNT2 NV5 .TP 22 .B GeForce 256, QUADRO NV10 .TP 22 .B GeForce2, QUADRO2 NV11 & NV15 .TP 22 .B GeForce3, QUADRO DCC NV20 .TP 22 .B nForce, nForce2 NV1A, NV1F .TP 22 .B GeForce4, QUADRO4 NV17, NV18, NV25, NV28 .TP 22 .B GeForce FX, QUADRO FX NV30, NV31, NV34, NV35, NV36, NV38 .SH CONFIGURATION DETAILS Please refer to XF86Config(__filemansuffix__) for general configuration details. This section only covers configuration details specific to this driver. .PP The driver auto-detects the chipset type and the amount of video memory present for all chips. .PP The following driver .B Options are supported: .TP .BI "Option \*qHWCursor\*q \*q" boolean \*q Enable or disable the HW cursor. Default: on. .TP .BI "Option \*qNoAccel\*q \*q" boolean \*q Disable or enable acceleration. Default: acceleration is enabled. .TP .BI "Option \*qUseFBDev\*q \*q" boolean \*q Enable or disable use of on OS-specific fb interface (and is not supported on all OSs). See fbdevhw(__drivermansuffix__) for further information. Default: off. .TP .BI "Option \*qCrtcNumber\*q \*q" integer \*q GeForce2 MX, nForce2, Quadro4, GeForce4, Quadro FX and GeForce FX may have two video outputs. The driver attempts to autodetect which one the monitor is connected to. In the case that autodetection picks the wrong one, this option may be used to force usage of a particular output. The options are "0" or "1". Default: autodetected. .TP .BI "Option \*qFlatPanel\*q \*q" boolean \*q The driver usually can autodetect the presence of a digital flat panel. In the case that this fails, this option can be used to force the driver to treat the attached device as a digital flat panel. With this driver, a digital flat panel will only work if it was POSTed by the BIOS, that is, the machine must have booted to the panel. If you have a dual head card you may also need to set the option CrtcNumber described above. Default: off. .TP .BI "Option \*qFPDither\*q \*q" boolean \*q Many digital flat panels (particularly ones on laptops) have only 6 bits per component color resolution. This option tells the driver to dither from 8 bits per component to 6 before the flat panel truncates it. This is only supported in depth 24 on GeForce2 MX, nForce2, GeForce4, Quadro4, Geforce FX and Quadro FX. Default: off. .TP .BI "Option \*qRotate\*q \*qCW\*q" .TP .BI "Option \*qRotate\*q \*qCCW\*q" Rotate the display clockwise or counterclockwise. This mode is unaccelerated. Default: no rotation. Note: The Resize and Rotate extension will be disabled if the Rotate option is used. .TP .BI "Option \*qShadowFB\*q \*q" boolean \*q Enable or disable use of the shadow framebuffer layer. Default: off. .SH "SEE ALSO" XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) .SH AUTHORS Authors include: David McKay, Jarno Paananen, Chas Inman, Dave Schmenk, Mark Vojkovich