diff options
| -rw-r--r-- | man/savage.man | 25 | ||||
| -rw-r--r-- | src/savage_dri.c | 209 | ||||
| -rw-r--r-- | src/savage_dri.h | 5 | ||||
| -rw-r--r-- | src/savage_driver.c | 47 | ||||
| -rw-r--r-- | src/savage_driver.h | 3 |
5 files changed, 220 insertions, 69 deletions
diff --git a/man/savage.man b/man/savage.man index 8f82910..07202ec 100644 --- a/man/savage.man +++ b/man/savage.man @@ -127,11 +127,13 @@ Default: on (use the BIOS). Enables the use of a shadow status register. There is a chip bug in the Savage graphics engine that can cause a bus lock when reading the engine status register under heavy load, such as when scrolling text or dragging -windows. The bug affects about 4% of all Savage users. If your system +windows. The bug affects about 4% of all Savage users without DRI and +a large fraction of users with DRI. If your system hangs regularly while scrolling text or dragging windows, try turning this option on. This uses an alternate method of reading the engine status -which is slightly more expensive, but avoids the problem. Default: off -(use normal status register). +which is slightly more expensive, but avoids the problem. When DRI is +enabled then the default is \*qon\*q (use shadow status), otherwise +the default is \*qoff\*q (use normal status register). .TP .BI "Option \*qDisableCOB\*q \*q" boolean \*q Disables the COB (Command Overflow Buffer) on savage4 and newer chips. @@ -164,6 +166,23 @@ The amount of AGP memory that will allocated for DMA and textures in MB. Valid sizes are 4, 8, 16, 32, 64, 128 and 256. The default is 16MB. .TP +.BI "Option \*qDmaMode\*q \*q" string \*q +This option influences in which way DMA (direct memory access) is used +by the kernel and 3D drivers. +.br +Any \-\- Try command DMA first, then vertex DMA (default) +.br +Command \-\- Only use command DMA or don't use DMA at all +.br +Vertex \-\- Only use vertex DMA or don't use DMA at all +.br +None \-\- Disable DMA +.br +Command and vertex DMA cannot be enabled at the same time. Which DMA +mode is actually used in the end also depends on the DRM version (only +>= 2.4.0 supports command DMA) and the hardware (Savage3D/MX/IX +doesn't support command DMA). +.TP .BI "Option \*qDmaType\*q \*q" string \*q The type of memory that will be used by the 3D driver for DMA (direct memory access). diff --git a/src/savage_dri.c b/src/savage_dri.c index c7d5e63..8613fd0 100644 --- a/src/savage_dri.c +++ b/src/savage_dri.c @@ -733,6 +733,7 @@ static Bool SAVAGEDRIAgpInit(ScreenPtr pScreen) SAVAGEDRIServerPrivatePtr pSAVAGEDRIServer = psav->DRIServerInfo; unsigned long mode; unsigned int vendor, device; + unsigned int offset; int ret; /*int size,numbuffer,i; savageAgpBufferPtr agpbuffer;*/ @@ -742,14 +743,23 @@ static Bool SAVAGEDRIAgpInit(ScreenPtr pScreen) pSAVAGEDRIServer->agp.size = psav->agpSize * 1024 * 1024; pSAVAGEDRIServer->agp.offset = pSAVAGEDRIServer->agp.size; /* ? */ - if (psav->AgpDMA) { - pSAVAGEDRIServer->buffers.offset = 0; - pSAVAGEDRIServer->buffers.size = SAVAGE_NUM_BUFFERS * SAVAGE_BUFFER_SIZE; + offset = 0; + + if ( psav->AgpDMA ) { + if ( psav->CommandDMA ) { + pSAVAGEDRIServer->cmdDma.offset = offset; + pSAVAGEDRIServer->cmdDma.size = SAVAGE_CMDDMA_SIZE; + offset += pSAVAGEDRIServer->cmdDma.size; + } else if ( psav->VertexDMA ) { + pSAVAGEDRIServer->buffers.offset = 0; + pSAVAGEDRIServer->buffers.size = SAVAGE_NUM_BUFFERS * SAVAGE_BUFFER_SIZE; + offset += pSAVAGEDRIServer->buffers.size; + } } - pSAVAGEDRIServer->agpTextures.offset = pSAVAGEDRIServer->buffers.size; - pSAVAGEDRIServer->agpTextures.size = (pSAVAGEDRIServer->agp.size - - pSAVAGEDRIServer->buffers.size); + pSAVAGEDRIServer->agpTextures.offset = offset; + pSAVAGEDRIServer->agpTextures.size = (pSAVAGEDRIServer->agp.size - offset); + offset += pSAVAGEDRIServer->agpTextures.size; if ( drmAgpAcquire( psav->drmFD ) < 0 ) { xf86DrvMsg( pScreen->myNum, X_ERROR, "[agp] AGP not available\n" ); @@ -807,31 +817,59 @@ static Bool SAVAGEDRIAgpInit(ScreenPtr pScreen) /* DMA buffers */ if ( psav->AgpDMA ) { - if ( drmAddMap( psav->drmFD, - pSAVAGEDRIServer->buffers.offset, - pSAVAGEDRIServer->buffers.size, - DRM_AGP, 0, - &pSAVAGEDRIServer->buffers.handle ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[agp] Could not add DMA buffers mapping\n" ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[agp] DMA buffers handle = 0x%08lx\n", - pSAVAGEDRIServer->buffers.handle ); - /* not needed in the server - if ( drmMap( psav->drmFD, - pSAVAGEDRIServer->buffers.handle, - pSAVAGEDRIServer->buffers.size, - &pSAVAGEDRIServer->buffers.map ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[agp] Could not map DMA buffers\n" ); - return FALSE; + if ( psav->CommandDMA ) { + if ( drmAddMap( psav->drmFD, + pSAVAGEDRIServer->cmdDma.offset, + pSAVAGEDRIServer->cmdDma.size, + DRM_AGP, DRM_RESTRICTED | DRM_KERNEL, + &pSAVAGEDRIServer->cmdDma.handle ) < 0 ) { + xf86DrvMsg( pScreen->myNum, X_ERROR, + "[agp] Could not add command DMA mapping\n" ); + return FALSE; + } + xf86DrvMsg( pScreen->myNum, X_INFO, + "[agp] command DMA handle = 0x%08lx\n", + pSAVAGEDRIServer->cmdDma.handle ); + /* not needed in the server + if ( drmMap( psav->drmFD, + pSAVAGEDRIServer->cmdDma.handle, + pSAVAGEDRIServer->cmdDma.size, + &pSAVAGEDRIServer->cmdDma.map ) < 0 ) { + xf86DrvMsg( pScreen->myNum, X_ERROR, + "[agp] Could not map command DMA\n" ); + return FALSE; + } + xf86DrvMsg( pScreen->myNum, X_INFO, + "[agp] command DMA mapped at 0x%08lx\n", + (unsigned long)pSAVAGEDRIServer->cmdDma.map ); + */ + } else if ( psav->VertexDMA ) { + if ( drmAddMap( psav->drmFD, + pSAVAGEDRIServer->buffers.offset, + pSAVAGEDRIServer->buffers.size, + DRM_AGP, 0, + &pSAVAGEDRIServer->buffers.handle ) < 0 ) { + xf86DrvMsg( pScreen->myNum, X_ERROR, + "[agp] Could not add DMA buffers mapping\n" ); + return FALSE; + } + xf86DrvMsg( pScreen->myNum, X_INFO, + "[agp] DMA buffers handle = 0x%08lx\n", + pSAVAGEDRIServer->buffers.handle ); + /* not needed in the server + if ( drmMap( psav->drmFD, + pSAVAGEDRIServer->buffers.handle, + pSAVAGEDRIServer->buffers.size, + &pSAVAGEDRIServer->buffers.map ) < 0 ) { + xf86DrvMsg( pScreen->myNum, X_ERROR, + "[agp] Could not map DMA buffers\n" ); + return FALSE; + } + xf86DrvMsg( pScreen->myNum, X_INFO, + "[agp] DMA buffers mapped at 0x%08lx\n", + (unsigned long)pSAVAGEDRIServer->buffers.map ); + */ } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[agp] DMA buffers mapped at 0x%08lx\n", - (unsigned long)pSAVAGEDRIServer->buffers.map ); - */ } /* AGP textures @@ -847,7 +885,7 @@ static Bool SAVAGEDRIAgpInit(ScreenPtr pScreen) } /* pSAVAGEDRIServer->agp_offset=pSAVAGEDRIServer->agpTexture.size;*/ xf86DrvMsg( pScreen->myNum, X_INFO, - "[agp] agpTextures microcode handle = 0x%08lx\n", + "[agp] agpTextures handle = 0x%08lx\n", pSAVAGEDRIServer->agpTextures.handle ); /* not needed in the server @@ -931,40 +969,55 @@ static Bool SAVAGEDRIMapInit( ScreenPtr pScreen ) }*/ - /* Always enable ShadowStatus for direct rendering. */ - if ( !psav->ShadowStatus ) { - psav->ShadowStatus = 1; + if ( !psav->AgpDMA && psav->CommandDMA ) { + pSAVAGEDRIServer->cmdDma.size = SAVAGE_CMDDMA_SIZE; + if ( drmAddMap( psav->drmFD, 0, pSAVAGEDRIServer->cmdDma.size, + DRM_CONSISTENT, DRM_RESTRICTED | DRM_LOCKED | + DRM_KERNEL | DRM_WRITE_COMBINING, + &pSAVAGEDRIServer->cmdDma.handle ) < 0 ) { + psav->CommandDMA = FALSE; + xf86DrvMsg( pScreen->myNum, X_WARNING, + "[drm] Could not add PCI command DMA mapping\n" ); + } else + xf86DrvMsg( pScreen->myNum, X_INFO, + "[drm] PCI command DMA handle = 0x%08lx\n", + pSAVAGEDRIServer->cmdDma.handle ); + } + + /* Enable ShadowStatus by default for direct rendering. */ + if ( !psav->ShadowStatus && !psav->ForceShadowStatus ) { + psav->ShadowStatus = TRUE; xf86DrvMsg( pScreen->myNum, X_INFO, "[drm] Enabling ShadowStatus for DRI.\n" ); - } - pSAVAGEDRIServer->status.size = 4096; /* 1 page */ + pSAVAGEDRIServer->status.size = 4096; /* 1 page */ - if ( drmAddMap( psav->drmFD, 0, pSAVAGEDRIServer->status.size, - DRM_CONSISTENT, DRM_READ_ONLY | DRM_LOCKED | DRM_KERNEL, - &pSAVAGEDRIServer->status.handle ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[drm] Could not add status page mapping\n" ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[drm] Status handle = 0x%08lx\n", - pSAVAGEDRIServer->status.handle ); + if ( drmAddMap( psav->drmFD, 0, pSAVAGEDRIServer->status.size, + DRM_CONSISTENT, DRM_READ_ONLY | DRM_LOCKED | DRM_KERNEL, + &pSAVAGEDRIServer->status.handle ) < 0 ) { + xf86DrvMsg( pScreen->myNum, X_ERROR, + "[drm] Could not add status page mapping\n" ); + return FALSE; + } + xf86DrvMsg( pScreen->myNum, X_INFO, + "[drm] Status handle = 0x%08lx\n", + pSAVAGEDRIServer->status.handle ); - if ( drmMap( psav->drmFD, - pSAVAGEDRIServer->status.handle, - pSAVAGEDRIServer->status.size, - &pSAVAGEDRIServer->status.map ) < 0 ) { - xf86DrvMsg( pScreen->myNum, X_ERROR, - "[drm] Could not map status page\n" ); - return FALSE; - } - xf86DrvMsg( pScreen->myNum, X_INFO, - "[drm] Status page mapped at 0x%08lx\n", - (unsigned long)pSAVAGEDRIServer->status.map ); + if ( drmMap( psav->drmFD, + pSAVAGEDRIServer->status.handle, + pSAVAGEDRIServer->status.size, + &pSAVAGEDRIServer->status.map ) < 0 ) { + xf86DrvMsg( pScreen->myNum, X_ERROR, + "[drm] Could not map status page\n" ); + return FALSE; + } + xf86DrvMsg( pScreen->myNum, X_INFO, + "[drm] Status page mapped at 0x%08lx\n", + (unsigned long)pSAVAGEDRIServer->status.map ); - psav->ShadowPhysical = pSAVAGEDRIServer->status.handle; - psav->ShadowVirtual = pSAVAGEDRIServer->status.map; + psav->ShadowPhysical = pSAVAGEDRIServer->status.handle; + psav->ShadowVirtual = pSAVAGEDRIServer->status.map; + } return TRUE; } @@ -976,6 +1029,13 @@ static Bool SAVAGEDRIBuffersInit( ScreenPtr pScreen ) SAVAGEDRIServerPrivatePtr pSAVAGEDRIServer = psav->DRIServerInfo; int count; + if ( !psav->VertexDMA || psav->CommandDMA ) { + /* At this point psav->CommandDMA == TRUE means that CommandDMA + * allocation was actually successful. */ + psav->VertexDMA = FALSE; + return TRUE; + } + if ( psav->AgpDMA ) { count = drmAddBufs( psav->drmFD, SAVAGE_NUM_BUFFERS, SAVAGE_BUFFER_SIZE, @@ -1042,9 +1102,19 @@ static Bool SAVAGEDRIKernelInit( ScreenPtr pScreen ) init.texture_size = pSAVAGEDRIServer->textureSize; init.status_offset = pSAVAGEDRIServer->status.handle; - init.buffers_offset = pSAVAGEDRIServer->buffers.handle; init.agp_textures_offset = pSAVAGEDRIServer->agpTextures.handle; + /* Savage4-based chips with DRM version >= 2.4 support command DMA, + * which is preferred because it works with all vertex + * formats. Command DMA and vertex DMA don't work at the same + * time. */ + init.buffers_offset = 0; + init.cmd_dma_offset = 0; + if ( psav->CommandDMA ) + init.cmd_dma_offset = pSAVAGEDRIServer->cmdDma.handle; + else if ( psav->VertexDMA ) + init.buffers_offset = pSAVAGEDRIServer->buffers.handle; + ret = drmCommandWrite( psav->drmFD, DRM_SAVAGE_BCI_INIT, &init, sizeof(init) ); if ( ret < 0 ) { xf86DrvMsg( pScrn->scrnIndex, X_ERROR, @@ -1251,7 +1321,7 @@ Bool SAVAGEDRIScreenInit( ScreenPtr pScreen ) /* incompatible drm version */ xf86DrvMsg( pScreen->myNum, X_ERROR, "[dri] SAVAGEDRIScreenInit failed because of a version mismatch.\n" - "[dri] savage.o kernel module version is %d.%d.%d but version 2.0.x is needed.\n" + "[dri] savage.ko kernel module version is %d.%d.%d but version 2.0.x is needed.\n" "[dri] Disabling DRI.\n", version->version_major, version->version_minor, @@ -1260,6 +1330,18 @@ Bool SAVAGEDRIScreenInit( ScreenPtr pScreen ) SAVAGEDRICloseScreen( pScreen ); /* FIXME: ??? */ return FALSE; } + if ( psav->CommandDMA && version->version_minor < 4 ) { + xf86DrvMsg( pScreen->myNum, X_WARNING, + "[drm] DRM version < 2.4.0 does not support command DMA.\n"); + psav->CommandDMA = FALSE; + } + if ( !psav->VertexDMA && version->version_minor < 4 ) { + xf86DrvMsg( pScreen->myNum, X_ERROR, + "[drm] DRM version < 2.4.0 requires vertex DMA.\n"); + drmFreeVersion( version ); + SAVAGEDRICloseScreen( pScreen ); + return FALSE; + } drmFreeVersion( version ); } } @@ -1483,6 +1565,11 @@ Bool SAVAGEDRIFinishScreenInit( ScreenPtr pScreen ) xf86DrvMsg( pScrn->scrnIndex, X_INFO, "[junkers] logAgpTextureGranularity:0x%08x\n",pSAVAGEDRIServer->logAgpTextureGranularity); + xf86DrvMsg( pScrn->scrnIndex, X_INFO, "[junkers] cmdDma:handle:0x%08lx\n",pSAVAGEDRIServer->cmdDma.handle); + xf86DrvMsg( pScrn->scrnIndex, X_INFO, "[junkers] cmdDma:offset:0x%08x\n",pSAVAGEDRIServer->cmdDma.offset); + xf86DrvMsg( pScrn->scrnIndex, X_INFO, "[junkers] cmdDma:size:0x%08x\n",pSAVAGEDRIServer->cmdDma.size); + xf86DrvMsg( pScrn->scrnIndex, X_INFO, "[junkers] cmdDma:map:0x%08lx\n",(unsigned long)pSAVAGEDRIServer->cmdDma.map); + xf86DrvMsg( pScrn->scrnIndex, X_INFO, "[junkers]pSAVAGEDRI:\n" ); xf86DrvMsg( pScrn->scrnIndex, X_INFO, "[junkers] chipset:0x%08x\n",pSAVAGEDRI->chipset ); xf86DrvMsg( pScrn->scrnIndex, X_INFO, "[junkers] width:0x%08x\n",pSAVAGEDRI->width ); diff --git a/src/savage_dri.h b/src/savage_dri.h index 39b6564..82b4aee 100644 --- a/src/savage_dri.h +++ b/src/savage_dri.h @@ -34,6 +34,8 @@ #define SAVAGE_NUM_BUFFERS 32 #define SAVAGE_BUFFER_SIZE (1 << 16) /* 64k */ +#define SAVAGE_CMDDMA_SIZE 0x100000 /* 1MB */ + #define SAVAGE_DEFAULT_AGP_MODE 1 #define SAVAGE_MAX_AGP_MODE 4 @@ -101,6 +103,9 @@ typedef struct _server{ drmRegion agpTextures; int logAgpTextureGranularity; + /* command DMA */ + drmRegion cmdDma; + #if 0 drmBufMapPtr drmBuffers; #endif diff --git a/src/savage_driver.c b/src/savage_driver.c index 74ff6a0..5b7704e 100644 --- a/src/savage_driver.c +++ b/src/savage_driver.c @@ -213,6 +213,7 @@ typedef enum { ,OPTION_DVI ,OPTION_BUS_TYPE ,OPTION_DMA_TYPE + ,OPTION_DMA_MODE ,OPTION_AGP_MODE ,OPTION_AGP_SIZE } SavageOpts; @@ -243,6 +244,7 @@ static const OptionInfoRec SavageOptions[] = #ifdef XF86DRI { OPTION_BUS_TYPE, "BusType", OPTV_ANYSTR, {0}, FALSE }, { OPTION_DMA_TYPE, "DmaType", OPTV_ANYSTR, {0}, FALSE }, + { OPTION_DMA_MODE, "DmaMode", OPTV_ANYSTR, {0}, FALSE }, { OPTION_AGP_MODE, "AGPMode", OPTV_INTEGER, {0}, FALSE }, { OPTION_AGP_SIZE, "AGPSize", OPTV_INTEGER, {0}, FALSE }, #endif @@ -1223,9 +1225,12 @@ static Bool SavagePreInit(ScrnInfoPtr pScrn, int flags) xf86DrvMsg( pScrn->scrnIndex, X_CONFIG, "Option: LCDClock %1.2f MHz\n", psav->LCDClock ); - if( xf86GetOptValBool( psav->Options, OPTION_SHADOW_STATUS, &psav->ShadowStatus)) + if( xf86GetOptValBool( psav->Options, OPTION_SHADOW_STATUS, &psav->ShadowStatus)) { xf86DrvMsg( pScrn->scrnIndex, X_CONFIG, - "Option: ShadowStatus enabled\n" ); + "Option: ShadowStatus %sabled\n", psav->ShadowStatus ? "en" : "dis" ); + psav->ForceShadowStatus = TRUE; + } else + psav->ForceShadowStatus = FALSE; /* If ShadowStatus is off it will be automatically enabled for DRI. * If DRI initialization fails fall back to ConfigShadowStatus. */ psav->ConfigShadowStatus = psav->ShadowStatus; @@ -1427,6 +1432,36 @@ static Bool SavagePreInit(ScrnInfoPtr pScrn, int flags) "Using %s DMA\n", psav->AgpDMA ? "AGP" : "PCI"); } + psav->CommandDMA = TRUE; + psav->VertexDMA = TRUE; + from = X_DEFAULT; + if ((s = xf86GetOptValString(psav->Options, OPTION_DMA_MODE))) { + from = X_CONFIG; + if (strcmp(s, "Command") == 0) + psav->VertexDMA = FALSE; + else if (strcmp(s, "Vertex") == 0) + psav->CommandDMA = FALSE; + else if (strcmp(s, "None") == 0) + psav->VertexDMA = psav->CommandDMA = FALSE; + else if (strcmp(s, "Any") != 0) { + xf86DrvMsg(pScrn->scrnIndex, X_WARNING, "Invalid DmaMode option\n"); + from = X_DEFAULT; + } + } + psav->CommandDMA = (psav->CommandDMA && !S3_SAVAGE3D_SERIES(psav->Chipset)); + if (psav->CommandDMA && psav->VertexDMA) + xf86DrvMsg(pScrn->scrnIndex, from, + "Will try command and vertex DMA mode\n"); + else if (psav->CommandDMA && !psav->VertexDMA) + xf86DrvMsg(pScrn->scrnIndex, from, + "Will try only command DMA mode\n"); + else if (!psav->CommandDMA && psav->VertexDMA) + xf86DrvMsg(pScrn->scrnIndex, from, + "Will try only vertex DMA mode\n"); + else + xf86DrvMsg(pScrn->scrnIndex, from, + "DMA disabled\n"); + if (!psav->IsPCI) { from = X_DEFAULT; psav->agpMode = SAVAGE_DEFAULT_AGP_MODE; @@ -3026,13 +3061,14 @@ static Bool SavageScreenInit(int scrnIndex, ScreenPtr pScreen, /* Setup DRI after visuals have been established */ psav->directRenderingEnabled = SAVAGEDRIScreenInit(pScreen); /* If DRI init failed, reset shadow status. */ - if (!psav->directRenderingEnabled) { + if (!psav->directRenderingEnabled && + psav->ShadowStatus != psav->ConfigShadowStatus) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Resetting ShadowStatus.\n"); SavageInitShadowStatus(pScrn); } /* If shadow status was enabled for DRI, hook up the shadow * waiting functions now. */ - else if (!psav->ConfigShadowStatus) { + else if (psav->ShadowStatus && !psav->ConfigShadowStatus) { psav->WaitQueue = ShadowWaitQueue; psav->WaitIdle = ShadowWait; psav->WaitIdleEmpty = ShadowWait; @@ -3211,7 +3247,8 @@ static Bool SavageScreenInit(int scrnIndex, ScreenPtr pScreen, psav->directRenderingEnabled = SAVAGEDRIFinishScreenInit(pScreen); /* If DRI initialization failed, reset shadow status and * reinitialize 2D engine. */ - if (!psav->directRenderingEnabled) { + if (!psav->directRenderingEnabled && + psav->ShadowStatus != psav->ConfigShadowStatus) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Resetting ShadowStatus.\n"); SavageInitShadowStatus(pScrn); SavageInitialize2DEngine(pScrn); diff --git a/src/savage_driver.h b/src/savage_driver.h index 6b8ee9e..a60262c 100644 --- a/src/savage_driver.h +++ b/src/savage_driver.h @@ -234,6 +234,7 @@ typedef struct _Savage { double LCDClock; Bool ConfigShadowStatus; /* from the config */ Bool ShadowStatus; /* automatically enabled with DRI */ + Bool ForceShadowStatus; /* true if explicitly set in conf */ Bool CrtOnly; Bool TvOn; Bool PAL; @@ -340,6 +341,8 @@ typedef struct _Savage { Bool IsPCI; Bool AgpDMA; + Bool VertexDMA; + Bool CommandDMA; int agpMode; drmSize agpSize; FBLinearPtr reserved; |