/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/savage/savage_cursor.c,v 1.7 2002/05/14 20:19:51 alanh Exp $ */ /* * Hardware cursor support for S3 Savage 4.0 driver. Taken with * very few changes from the s3virge cursor file. * * S. Marineau, 19/04/97. * Modified by Amancio Hasty and Jon Tombs * Ported to 4.0 by Tim Roberts. */ #include "savage_driver.h" static void SavageLoadCursorImage(ScrnInfoPtr pScrn, unsigned char *src); static void SavageSetCursorPosition(ScrnInfoPtr pScrn, int x, int y); static void SavageSetCursorColors(ScrnInfoPtr pScrn, int bg, int fg); /* * Read/write to the DAC via MMIO */ #define inCRReg(reg) (VGAHWPTR(pScrn))->readCrtc( VGAHWPTR(pScrn), reg ) #define outCRReg(reg, val) (VGAHWPTR(pScrn))->writeCrtc( VGAHWPTR(pScrn), reg, val ) #define inSRReg(reg) (VGAHWPTR(pScrn))->readSeq( VGAHWPTR(pScrn), reg ) #define outSRReg(reg, val) (VGAHWPTR(pScrn))->writeSeq( VGAHWPTR(pScrn), reg, val ) #if 0 #define inStatus1() (VGAHWPTR(pScrn))->readST01( VGAHWPTR(pScrn) ) #endif /* * certain HW cursor operations seem * to require a delay to prevent lockups. */ #define waitHSync(n) { \ int num = n; \ while (num--) { \ while ((inStatus1()) & 0x01){};\ while (!(inStatus1()) & 0x01){};\ } \ } #define MAX_CURS 64 /* * Disable HW Cursor on stretched LCDs. We don't know how to * detect if display is stretched. Therefore we cannot rescale * the HW cursor position. */ static Bool SavageUseHWCursor(ScreenPtr pScr, CursorPtr pCurs) { ScrnInfoPtr pScrn = xf86Screens[pScr->myNum]; SavagePtr psav = SAVPTR(pScrn); if (psav->PanelX != pScrn->currentMode->HDisplay || psav->PanelY != pScrn->currentMode->VDisplay) { /* BIT 1 : CRT is active, BIT 2 : LCD is active */ unsigned char cr6d = inCRReg( 0x6d ); if (cr6d & 0x02) return FALSE; } return TRUE; } Bool SavageHWCursorInit(ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; SavagePtr psav = SAVPTR(pScrn); xf86CursorInfoPtr infoPtr; infoPtr = xf86CreateCursorInfoRec(); if(!infoPtr) return FALSE; psav->CursorInfoRec = infoPtr; infoPtr->MaxWidth = MAX_CURS; infoPtr->MaxHeight = MAX_CURS; infoPtr->Flags = HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_16 | HARDWARE_CURSOR_SWAP_SOURCE_AND_MASK | HARDWARE_CURSOR_AND_SOURCE_WITH_MASK | HARDWARE_CURSOR_BIT_ORDER_MSBFIRST | HARDWARE_CURSOR_INVERT_MASK; #if 0 /* * The /MX family is apparently unique among the Savages, in that * the cursor color is always straight RGB. The rest of the Savages * use palettized values at 8-bit when not clock doubled. */ if( ((psav->Chipset != S3_SAVAGE4) && (inSRReg(0x18) & 0x80) && (inSRReg(0x15) & 0x50) ) || S3_SAVAGE_MOBILE_SERIES(psav->Chipset) ) infoPtr->Flags |= HARDWARE_CURSOR_TRUECOLOR_AT_8BPP; #endif /* With streams engine the Cursor seems to be ALWAYS TrueColor */ infoPtr->Flags |= HARDWARE_CURSOR_TRUECOLOR_AT_8BPP; infoPtr->SetCursorColors = SavageSetCursorColors; infoPtr->SetCursorPosition = SavageSetCursorPosition; infoPtr->LoadCursorImage = SavageLoadCursorImage; infoPtr->HideCursor = SavageHideCursor; infoPtr->ShowCursor = SavageShowCursor; infoPtr->UseHWCursor = NULL; #if 0 /*AGD: HW cursor seems to work fine even with expansion... */ if ((S3_SAVAGE_MOBILE_SERIES(psav->Chipset) || (S3_MOBILE_TWISTER_SERIES(psav->Chipset))) && !psav->CrtOnly) infoPtr->UseHWCursor = SavageUseHWCursor; else infoPtr->UseHWCursor = NULL; #endif if( !psav->CursorKByte ) psav->CursorKByte = pScrn->videoRam - 4; return xf86InitCursor(pScreen, infoPtr); } void SavageShowCursor(ScrnInfoPtr pScrn) { /* Turn cursor on. */ outCRReg( 0x45, inCRReg(0x45) | 0x01 ); SAVPTR(pScrn)->hwc_on = TRUE; } void SavageHideCursor(ScrnInfoPtr pScrn) { /* Turn cursor off. */ if( S3_SAVAGE4_SERIES( SAVPTR(pScrn)->Chipset ) ) { waitHSync(5); } outCRReg( 0x45, inCRReg(0x45) & 0xfe ); SAVPTR(pScrn)->hwc_on = FALSE; } static void SavageLoadCursorImage( ScrnInfoPtr pScrn, unsigned char* src) { SavagePtr psav = SAVPTR(pScrn); /* Set cursor location in frame buffer. */ outCRReg( 0x4d, (0xff & (CARD32)psav->CursorKByte)); outCRReg( 0x4c, (0xff00 & (CARD32)psav->CursorKByte) >> 8); /* Upload the cursor image to the frame buffer. */ memcpy(psav->FBBase + psav->CursorKByte * 1024, src, 1024); if( S3_SAVAGE4_SERIES( psav->Chipset ) ) { /* * Bug in Savage4 Rev B requires us to do an MMIO read after * loading the cursor. */ volatile unsigned int i = ALT_STATUS_WORD0; (void)i; /* Not to be optimised out */ } } static void SavageSetCursorPosition( ScrnInfoPtr pScrn, int x, int y) { unsigned char xoff, yoff; if( S3_SAVAGE4_SERIES( SAVPTR(pScrn)->Chipset ) ) { waitHSync(5); } /* adjust for frame buffer base address granularity */ if (pScrn->bitsPerPixel == 8) x += ((pScrn->frameX0) & 3); else if (pScrn->bitsPerPixel == 16) x += ((pScrn->frameX0) & 1); else if (pScrn->bitsPerPixel == 32) x += ((pScrn->frameX0+2) & 3) - 2; /* * Make these even when used. There is a bug/feature on at least * some chipsets that causes a "shadow" of the cursor in interlaced * mode. Making this even seems to have no visible effect, so just * do it for the generic case. */ if (x < 0) { xoff = ((-x) & 0xFE); x = 0; } else { xoff = 0; } if (y < 0) { yoff = ((-y) & 0xFE); y = 0; } else { yoff = 0; } /* This is the recomended order to move the cursor */ outCRReg( 0x46, (x & 0xff00)>>8 ); outCRReg( 0x47, (x & 0xff) ); outCRReg( 0x49, (y & 0xff) ); outCRReg( 0x4e, xoff ); outCRReg( 0x4f, yoff ); outCRReg( 0x48, (y & 0xff00)>>8 ); } static void SavageSetCursorColors( ScrnInfoPtr pScrn, int bg, int fg) { SavagePtr psav = SAVPTR(pScrn); Bool bNeedExtra = FALSE; /* Clock doubled modes need an extra cursor stack write. */ bNeedExtra = (psav->CursorInfoRec->Flags & HARDWARE_CURSOR_TRUECOLOR_AT_8BPP); /* With the streams engine on HW Cursor seems to be 24bpp ALWAYS */ if( 1 #if 0 || S3_SAVAGE_MOBILE_SERIES(psav->Chipset) || (pScrn->depth == 24) || ((pScrn->depth == 8) && bNeedExtra) #endif ) { /* Do it straight, full 24 bit color. */ /* Reset the cursor color stack pointer */ inCRReg(0x45); /* Write low, mid, high bytes - foreground */ outCRReg(0x4a, fg); outCRReg(0x4a, fg >> 8); outCRReg(0x4a, fg >> 16); /* Reset the cursor color stack pointer */ inCRReg(0x45); /* Write low, mid, high bytes - background */ outCRReg(0x4b, bg); outCRReg(0x4b, bg >> 8); outCRReg(0x4b, bg >> 16); return; } #if 0 else if( (pScrn->depth == 15) || (pScrn->depth == 16) ) { if (pScrn->depth == 15) { fg = ((fg & 0xf80000) >> 9) | ((fg & 0xf800) >> 6) | ((fg & 0xf8) >> 3); bg = ((bg & 0xf80000) >> 9) | ((bg & 0xf800) >> 6) | ((bg & 0xf8) >> 3); } else { fg = ((fg & 0xf80000) >> 8) | ((fg & 0xfc00) >> 5) | ((fg & 0xf8) >> 3); bg = ((bg & 0xf80000) >> 8) | ((bg & 0xfc00) >> 5) | ((bg & 0xf8) >> 3); } /* Reset the cursor color stack pointer */ inCRReg( 0x45 ); outCRReg( 0x4a, fg ); outCRReg( 0x4a, fg>>8 ); if( bNeedExtra ) { outCRReg( 0x4a, fg ); outCRReg( 0x4a, fg>>8 ); } /* Reset the cursor color stack pointer */ inCRReg( 0x45 ); outCRReg( 0x4b, bg ); outCRReg( 0x4b, bg>>8 ); if( bNeedExtra ) { outCRReg( 0x4b, bg ); outCRReg( 0x4b, bg>>8 ); } } else if( pScrn->depth == 8 ) { /* Reset the cursor color stack pointer */ inCRReg(0x45); /* Write foreground */ outCRReg(0x4a, fg); outCRReg(0x4a, fg); /* Reset the cursor color stack pointer */ inCRReg(0x45); /* Write background */ outCRReg(0x4b, bg); outCRReg(0x4b, bg); } #endif }