diff options
Diffstat (limited to 'src/smi.h')
| -rw-r--r-- | src/smi.h | 348 |
1 files changed, 174 insertions, 174 deletions
@@ -63,7 +63,7 @@ authorization from the XFree86 Project and Silicon Motion. /******************************************************************************/ #ifndef SMI_DEBUG -# define SMI_DEBUG 0 +# define SMI_DEBUG 0 #endif #define SMI_USE_IMAGE_WRITES 0 @@ -77,179 +77,179 @@ authorization from the XFree86 Project and Silicon Motion. /* Driver data structure; this should contain all needed info for a mode */ typedef struct { - Bool modeInit; - CARD16 mode; - CARD8 SR17, SR18, SR21, SR31, SR32, SR6A, SR6B, SR81, SRA0; - CARD8 CR33, CR33_2, CR3A; - CARD8 CR40[14], CR40_2[14]; - CARD8 CR90[16], CR9F_2; - CARD8 CRA0[14]; - CARD8 smiDACMask, smiDacRegs[256][3]; + Bool modeInit; + CARD16 mode; + CARD8 SR17, SR18, SR21, SR31, SR32, SR6A, SR6B, SR81, SRA0; + CARD8 CR33, CR33_2, CR3A; + CARD8 CR40[14], CR40_2[14]; + CARD8 CR90[16], CR9F_2; + CARD8 CRA0[14]; + CARD8 smiDACMask, smiDacRegs[256][3]; /* CZ 2.11.2001: for gamma correction */ CARD8 CCR66; /* end CZ */ - CARD8 smiFont[8192]; - CARD32 DPR10, DPR1C, DPR20, DPR24, DPR28, DPR2C, DPR30, DPR3C, DPR40, - DPR44; - CARD32 VPR00, VPR0C, VPR10; - CARD32 CPR00; - CARD32 FPR00_, FPR0C_, FPR10_; - /* LCD FIFO regs, etc. - dualhead */ - CARD8 SR22, SR40, SR41, SR42, SR43, SR44, SR45, SR48, SR49, - SR4A, SR4B, SR4C; - /* PLL controls */ - CARD8 SR68, SR69, SR6C, SR6D, SR6E, SR6F; + CARD8 smiFont[8192]; + CARD32 DPR10, DPR1C, DPR20, DPR24, DPR28, DPR2C, DPR30, DPR3C, DPR40, + DPR44; + CARD32 VPR00, VPR0C, VPR10; + CARD32 CPR00; + CARD32 FPR00_, FPR0C_, FPR10_; + /* LCD FIFO regs, etc. - dualhead */ + CARD8 SR22, SR40, SR41, SR42, SR43, SR44, SR45, SR48, SR49, + SR4A, SR4B, SR4C; + /* PLL controls */ + CARD8 SR68, SR69, SR6C, SR6D, SR6E, SR6F; } SMIRegRec, *SMIRegPtr; /* Global PDEV structure. */ typedef struct { - /* accel additions */ - CARD32 AccelCmd; /* Value for DPR0C */ - CARD32 Stride; /* Stride of frame buffer */ - CARD32 ScissorsLeft; /* Left/top of current - scissors */ - CARD32 ScissorsRight; /* Right/bottom of current - scissors */ - Bool ClipTurnedOn; /* Clipping was turned on by - the previous command */ - CARD8 SR18Value; /* PDR#521: original SR18 - value */ - CARD8 SR21Value; /* PDR#521: original SR21 - value */ - SMIRegRec SavedReg; /* console saved mode - registers */ - SMIRegRec ModeReg; /* XServer video state mode - registers */ - xf86CursorInfoPtr CursorInfoRec; /* HW Cursor info */ - - Bool ModeStructInit; /* Flag indicating ModeReg has - been duped from console - state */ - int vgaCRIndex, vgaCRReg; - int width, height; /* Width and height of the - screen */ - int Bpp; /* Bytes per pixel */ - - /* XAA */ - int videoRAMBytes; /* In units as noted, set in - PreInit */ - int videoRAMKBytes; /* In units as noted, set in - PreInit */ - unsigned char * MapBase; /* Base of mapped memory */ - int MapSize; /* Size of mapped memory */ - CARD8 * DPRBase; /* Base of DPR registers */ - CARD8 * VPRBase; /* Base of VPR registers */ - CARD8 * CPRBase; /* Base of CPR registers */ - CARD8 * FPRBase; /* Base of FPR registers - for 0730 chipset */ - CARD8 * DataPortBase; /* Base of data port */ - int DataPortSize; /* Size of data port */ - CARD8 * IOBase; /* Base of MMIO VGA ports */ - IOADDRESS PIOBase; /* Base of I/O ports */ - unsigned char * FBBase; /* Base of FB */ - CARD32 FBOffset; /* Current visual FB starting - location */ - CARD32 FBCursorOffset; /* Cursor storage location */ - CARD32 FBReserved; /* Reserved memory in frame - buffer */ + /* accel additions */ + CARD32 AccelCmd; /* Value for DPR0C */ + CARD32 Stride; /* Stride of frame buffer */ + CARD32 ScissorsLeft; /* Left/top of current + scissors */ + CARD32 ScissorsRight; /* Right/bottom of current + scissors */ + Bool ClipTurnedOn; /* Clipping was turned on by + the previous command */ + CARD8 SR18Value; /* PDR#521: original SR18 + value */ + CARD8 SR21Value; /* PDR#521: original SR21 + value */ + SMIRegRec SavedReg; /* console saved mode + registers */ + SMIRegRec ModeReg; /* XServer video state mode + registers */ + xf86CursorInfoPtr CursorInfoRec; /* HW Cursor info */ + + Bool ModeStructInit; /* Flag indicating ModeReg has + been duped from console + state */ + int vgaCRIndex, vgaCRReg; + int width, height; /* Width and height of the + screen */ + int Bpp; /* Bytes per pixel */ + + /* XAA */ + int videoRAMBytes; /* In units as noted, set in + PreInit */ + int videoRAMKBytes; /* In units as noted, set in + PreInit */ + unsigned char * MapBase; /* Base of mapped memory */ + int MapSize; /* Size of mapped memory */ + CARD8 * DPRBase; /* Base of DPR registers */ + CARD8 * VPRBase; /* Base of VPR registers */ + CARD8 * CPRBase; /* Base of CPR registers */ + CARD8 * FPRBase; /* Base of FPR registers - for 0730 chipset */ + CARD8 * DataPortBase; /* Base of data port */ + int DataPortSize; /* Size of data port */ + CARD8 * IOBase; /* Base of MMIO VGA ports */ + IOADDRESS PIOBase; /* Base of I/O ports */ + unsigned char * FBBase; /* Base of FB */ + CARD32 FBOffset; /* Current visual FB starting + location */ + CARD32 FBCursorOffset; /* Cursor storage location */ + CARD32 FBReserved; /* Reserved memory in frame + buffer */ - Bool PrimaryVidMapped; /* Flag indicating if - vgaHWMapMem was used - successfully for - this screen */ - int MCLK; /* Memory Clock */ - int GEResetCnt; /* Limit the number of errors - printed using a counter */ - - Bool pci_burst; /* Enable PCI burst mode for - reads? */ - Bool NoPCIRetry; /* Disable PCI retries */ - Bool fifo_conservative; /* Adjust fifo for - acceleration? */ - Bool fifo_moderate; /* Adjust fifo for + Bool PrimaryVidMapped; /* Flag indicating if + vgaHWMapMem was used + successfully for + this screen */ + int MCLK; /* Memory Clock */ + int GEResetCnt; /* Limit the number of errors + printed using a counter */ + + Bool pci_burst; /* Enable PCI burst mode for + reads? */ + Bool NoPCIRetry; /* Disable PCI retries */ + Bool fifo_conservative; /* Adjust fifo for acceleration? */ - Bool fifo_aggressive; /* Adjust fifo for - acceleration? */ - Bool NoAccel; /* Disable Acceleration */ - Bool hwcursor; /* hardware cursor enabled */ - Bool ShowCache; /* Debugging option */ - Bool useBIOS; /* Use BIOS for mode sets */ - Bool zoomOnLCD; /* Zoom on LCD */ + Bool fifo_moderate; /* Adjust fifo for + acceleration? */ + Bool fifo_aggressive; /* Adjust fifo for + acceleration? */ + Bool NoAccel; /* Disable Acceleration */ + Bool hwcursor; /* hardware cursor enabled */ + Bool ShowCache; /* Debugging option */ + Bool useBIOS; /* Use BIOS for mode sets */ + Bool zoomOnLCD; /* Zoom on LCD */ - CloseScreenProcPtr CloseScreen; /* Pointer used to save wrapped - CloseScreen function */ - XAAInfoRecPtr AccelInfoRec; /* XAA info Rec */ - pciVideoPtr PciInfo; /* PCI info vars */ - PCITAG PciTag; - int Chipset; /* Chip info, set using PCI - above */ - int ChipRev; - - /* DGA */ - DGAModePtr DGAModes; /* Pointer to DGA modes */ - int numDGAModes; /* Number of DGA modes */ - Bool DGAactive; /* Flag if DGA is active */ - int DGAViewportStatus; - - /* DPMS */ - int CurrentDPMS; /* Current DPMS state */ - unsigned char DPMS_SR20; /* Saved DPMS SR20 register */ - unsigned char DPMS_SR21; /* Saved DPMS SR21 register */ - unsigned char DPMS_SR31; /* Saved DPMS SR31 register */ - unsigned char DPMS_SR34; /* Saved DPMS SR34 register */ - - /* Panel information */ - Bool lcd; /* LCD active, 1=DSTN, 2=TFT */ - int lcdWidth; /* LCD width */ - int lcdHeight; /* LCD height */ - - I2CBusPtr I2C; /* Pointer into I2C module */ - xf86Int10InfoPtr pInt10; /* Pointer to INT10 module */ - - /* Shadow frame buffer (rotation) */ - Bool shadowFB; /* Flag if shadow buffer is + CloseScreenProcPtr CloseScreen; /* Pointer used to save wrapped + CloseScreen function */ + XAAInfoRecPtr AccelInfoRec; /* XAA info Rec */ + pciVideoPtr PciInfo; /* PCI info vars */ + PCITAG PciTag; + int Chipset; /* Chip info, set using PCI + above */ + int ChipRev; + + /* DGA */ + DGAModePtr DGAModes; /* Pointer to DGA modes */ + int numDGAModes; /* Number of DGA modes */ + Bool DGAactive; /* Flag if DGA is active */ + int DGAViewportStatus; + + /* DPMS */ + int CurrentDPMS; /* Current DPMS state */ + unsigned char DPMS_SR20; /* Saved DPMS SR20 register */ + unsigned char DPMS_SR21; /* Saved DPMS SR21 register */ + unsigned char DPMS_SR31; /* Saved DPMS SR31 register */ + unsigned char DPMS_SR34; /* Saved DPMS SR34 register */ + + /* Panel information */ + Bool lcd; /* LCD active, 1=DSTN, 2=TFT */ + int lcdWidth; /* LCD width */ + int lcdHeight; /* LCD height */ + + I2CBusPtr I2C; /* Pointer into I2C module */ + xf86Int10InfoPtr pInt10; /* Pointer to INT10 module */ + + /* Shadow frame buffer (rotation) */ + Bool shadowFB; /* Flag if shadow buffer is used */ - int rotate; /* Rotation flags */ - int ShadowPitch; /* Pitch of shadow buffer */ - int ShadowWidthBytes; /* Width of shadow - buffer in bytes */ - int ShadowWidth; /* Width of shadow buffer in - pixels */ - int ShadowHeight; /* Height of shadow buffer in - pixels */ - CARD32 saveBufferSize; /* #670 - FB save buffer size */ - void * pSaveBuffer; /* #670 - FB save buffer */ - CARD32 fbMapOffset; /* offset for fb mapping */ - CARD32 savedFBOffset; /* #670 - Saved FBOffset value */ - CARD32 savedFBReserved; /* #670 - Saved - FBReserved value */ - CARD8 * paletteBuffer; /* #920 - Palette save buffer */ - - /* Polylines - #671 */ - ValidateGCProcPtr ValidatePolylines; /* Org. - ValidatePolylines - function */ - Bool polyLines; /* Our polylines patch is - active */ - - void (*PointerMoved)(int index, int x, int y); - - int videoKey; /* Video chroma key */ - Bool ByteSwap; /* Byte swap for ZV port */ - Bool interlaced; /* True: Interlaced Video */ - /* XvExtension */ - XF86VideoAdaptorPtr ptrAdaptor; /* Pointer to VideoAdapter - structure */ - void (*BlockHandler)(int i, pointer blockData, pointer pTimeout, - pointer pReadMask); - GCPtr videoGC; - OptionInfoPtr Options; - CARD8 DACmask; - - Bool Dualhead; - - Bool IsSwitching; /* when switching modes */ + int rotate; /* Rotation flags */ + int ShadowPitch; /* Pitch of shadow buffer */ + int ShadowWidthBytes; /* Width of shadow + buffer in bytes */ + int ShadowWidth; /* Width of shadow buffer in + pixels */ + int ShadowHeight; /* Height of shadow buffer in + pixels */ + CARD32 saveBufferSize; /* #670 - FB save buffer size */ + void * pSaveBuffer; /* #670 - FB save buffer */ + CARD32 fbMapOffset; /* offset for fb mapping */ + CARD32 savedFBOffset; /* #670 - Saved FBOffset value */ + CARD32 savedFBReserved; /* #670 - Saved + FBReserved value */ + CARD8 * paletteBuffer; /* #920 - Palette save buffer */ + + /* Polylines - #671 */ + ValidateGCProcPtr ValidatePolylines; /* Org. + ValidatePolylines + function */ + Bool polyLines; /* Our polylines patch is + active */ + + void (*PointerMoved)(int index, int x, int y); + + int videoKey; /* Video chroma key */ + Bool ByteSwap; /* Byte swap for ZV port */ + Bool interlaced; /* True: Interlaced Video */ + /* XvExtension */ + XF86VideoAdaptorPtr ptrAdaptor; /* Pointer to VideoAdapter + structure */ + void (*BlockHandler)(int i, pointer blockData, pointer pTimeout, + pointer pReadMask); + GCPtr videoGC; + OptionInfoPtr Options; + CARD8 DACmask; + + Bool Dualhead; + + Bool IsSwitching; /* when switching modes */ } SMIRec, *SMIPtr; @@ -260,20 +260,20 @@ typedef struct /******************************************************************************/ #if SMI_DEBUG -# define VERBLEV 1 -# define ENTER_PROC(PROCNAME) xf86ErrorFVerb(VERBLEV, "ENTER\t" PROCNAME \ - "(%d)\n", __LINE__); xf86Break1() -# define DEBUG_PROC(PROCNAME) xf86ErrorFVerb(VERBLEV, "DEBUG\t" PROCNAME \ - "(%d)\n", __LINE__); xf86Break2() -# define LEAVE_PROC(PROCNAME) xf86ErrorFVerb(VERBLEV, "LEAVE\t" PROCNAME \ - "(%d)\n", __LINE__); xf86Break1() -# define DEBUG(arg) xf86ErrorFVerb arg +# define VERBLEV 1 +# define ENTER_PROC(PROCNAME) xf86ErrorFVerb(VERBLEV, "ENTER\t" PROCNAME \ + "(%d)\n", __LINE__); xf86Break1() +# define DEBUG_PROC(PROCNAME) xf86ErrorFVerb(VERBLEV, "DEBUG\t" PROCNAME \ + "(%d)\n", __LINE__); xf86Break2() +# define LEAVE_PROC(PROCNAME) xf86ErrorFVerb(VERBLEV, "LEAVE\t" PROCNAME \ + "(%d)\n", __LINE__); xf86Break1() +# define DEBUG(arg) xf86ErrorFVerb arg #else -# define VERBLEV 4 -# define ENTER_PROC(PROCNAME) -# define DEBUG_PROC(PROCNAME) -# define LEAVE_PROC(PROCNAME) -# define DEBUG(arg) +# define VERBLEV 4 +# define ENTER_PROC(PROCNAME) +# define DEBUG_PROC(PROCNAME) +# define LEAVE_PROC(PROCNAME) +# define DEBUG(arg) #endif /* Some Silicon Motion structs & registers */ |