diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/smi501_crtc.c | 30 | ||||
-rw-r--r-- | src/smi_501.c | 10 | ||||
-rw-r--r-- | src/smi_501.h | 13 |
3 files changed, 31 insertions, 22 deletions
diff --git a/src/smi501_crtc.c b/src/smi501_crtc.c index 18fa764..9802ba9 100644 --- a/src/smi501_crtc.c +++ b/src/smi501_crtc.c @@ -45,6 +45,7 @@ SMI501_CrtcVideoInit_lcd(xf86CrtcPtr crtc) ScrnInfoPtr pScrn=crtc->scrn; SMIPtr pSmi = SMIPTR(pScrn); MSOCRegPtr mode = pSmi->mode; + int pitch, width; ENTER(); @@ -56,13 +57,13 @@ SMI501_CrtcVideoInit_lcd(xf86CrtcPtr crtc) pScrn->bitsPerPixel == 8 ? 0 : pScrn->bitsPerPixel == 16 ? 1 : 2; - int pitch = (crtc->rotatedData? crtc->mode.HDisplay : pScrn->displayWidth) * pSmi->Bpp; - pitch = (pitch + 15) & ~15; + pitch = (((crtc->rotatedData? crtc->mode.HDisplay : pScrn->displayWidth) * + pSmi->Bpp) + 15) & ~15; + width = crtc->mode.HDisplay * pSmi->Bpp; /* >> 4 because of the "unused bits" that should be set to 0 */ - /* FIXME this should be used for virtual size? */ mode->panel_fb_width.f.offset = pitch >> 4; - mode->panel_fb_width.f.width = pitch >> 4; + mode->panel_fb_width.f.width = width >> 4; WRITE_SCR(pSmi, PANEL_DISPLAY_CTL, mode->panel_display_ctl.value); WRITE_SCR(pSmi, PANEL_FB_WIDTH, mode->panel_fb_width.value); @@ -76,6 +77,7 @@ SMI501_CrtcVideoInit_crt(xf86CrtcPtr crtc) ScrnInfoPtr pScrn=crtc->scrn; SMIPtr pSmi = SMIPTR(pScrn); MSOCRegPtr mode = pSmi->mode; + int pitch, width; ENTER(); @@ -87,13 +89,13 @@ SMI501_CrtcVideoInit_crt(xf86CrtcPtr crtc) pScrn->bitsPerPixel == 8 ? 0 : pScrn->bitsPerPixel == 16 ? 1 : 2; - int pitch = (crtc->rotatedData? crtc->mode.HDisplay : pScrn->displayWidth) * pSmi->Bpp; - pitch = (pitch + 15) & ~15; + pitch = (((crtc->rotatedData? crtc->mode.HDisplay : pScrn->displayWidth) * + pSmi->Bpp) + 15) & ~15; + width = crtc->mode.HDisplay * pSmi->Bpp; /* >> 4 because of the "unused bits" that should be set to 0 */ - /* FIXME this should be used for virtual size? */ mode->crt_fb_width.f.offset = pitch >> 4; - mode->crt_fb_width.f.width = pitch >> 4; + mode->crt_fb_width.f.width = width >> 4; WRITE_SCR(pSmi, CRT_DISPLAY_CTL, mode->crt_display_ctl.value); @@ -122,9 +124,11 @@ SMI501_CrtcAdjustFrame(xf86CrtcPtr crtc, int x, int y) if(crtc == crtcConf->crtc[0]){ mode->panel_fb_address.f.address = Base >> 4; + mode->panel_fb_address.f.pending = 1; WRITE_SCR(pSmi, PANEL_FB_ADDRESS, mode->panel_fb_address.value); }else{ mode->crt_fb_address.f.address = Base >> 4; + mode->crt_fb_address.f.pending = 1; WRITE_SCR(pSmi, CRT_FB_ADDRESS, mode->crt_fb_address.value); } @@ -153,7 +157,6 @@ SMI501_CrtcModeSet_lcd(xf86CrtcPtr crtc, /* Initialize the display controller */ SMI501_CrtcVideoInit_lcd(crtc); - SMI501_CrtcAdjustFrame(crtc, x,y); /* P2CLK have dividers 1, 3 and 5 */ xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, VERBLEV, @@ -237,6 +240,7 @@ SMI501_CrtcModeSet_lcd(xf86CrtcPtr crtc, SMI501_WriteMode_lcd(pScrn,mode); + SMI501_CrtcAdjustFrame(crtc, x, y); LEAVE(); } @@ -257,7 +261,6 @@ SMI501_CrtcModeSet_crt(xf86CrtcPtr crtc, /* Initialize the display controller */ SMI501_CrtcVideoInit_crt(crtc); - SMI501_CrtcAdjustFrame(crtc, x,y); /* V2CLK have dividers 1 and 3 */ xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, VERBLEV, @@ -275,11 +278,9 @@ SMI501_CrtcModeSet_crt(xf86CrtcPtr crtc, mode->crt_display_ctl.f.select = 1; mode->crt_display_ctl.f.enable = 1; - /* FIXME if non clone dual head, and secondary, need to - * properly set crt fb address ... */ - mode->crt_fb_address.f.address = 0; mode->crt_fb_address.f.mextern = 0; /* local memory */ - mode->crt_fb_address.f.pending = 0; /* FIXME required? */ + mode->crt_fb_address.f.timing = 1; + mode->crt_display_ctl.f.blank = 0; /* 0 means pulse high */ mode->crt_display_ctl.f.hsync = !(xf86mode->Flags & V_PHSYNC); @@ -300,6 +301,7 @@ SMI501_CrtcModeSet_crt(xf86CrtcPtr crtc, xf86mode->HSyncStart; SMI501_WriteMode_crt(pScrn,mode); + SMI501_CrtcAdjustFrame(crtc, x, y); LEAVE(); } diff --git a/src/smi_501.c b/src/smi_501.c index 26669cf..f973ed7 100644 --- a/src/smi_501.c +++ b/src/smi_501.c @@ -206,13 +206,12 @@ SMI501_HWInit(ScrnInfoPtr pScrn) break; } - - /* FIXME: No dual head setup, and in this case, crt may - * just be another panel */ - /* crt clones panel */ + /* By default, crt clones panel */ mode->crt_display_ctl.f.enable = 1; /* 0: select panel - 1: select crt */ mode->crt_display_ctl.f.select = 0; + /* FIXME correct? */ + mode->crt_display_ctl.f.timing = 0; SMI501_WriteMode_common(pScrn, mode); @@ -382,6 +381,7 @@ SMI501_FindClock(double clock, int32_t max_divider, Bool has1xclck, if (fabs(diff) < best) { *x2_shift = shift; *x2_divider = divider == 1 ? 0 : divider == 3 ? 1 : 2; + *x2_select = mclk == 12 * 24 * 1000.0 ? 0 : 1; *x2_1xclck = xclck == 0; /* Remember best diff */ @@ -392,8 +392,6 @@ SMI501_FindClock(double clock, int32_t max_divider, Bool has1xclck, } } - *x2_select = mclk == 12 * 24 * 1000.0 ? 0 : 1; - xf86ErrorFVerb(VERBLEV, "\tMatching clock %5.2f, diff %5.2f (%d/%d/%d/%d)\n", ((*x2_select ? 14 : 12) * 24 * 1000.0) / diff --git a/src/smi_501.h b/src/smi_501.h index e42606a..1d68ebe 100644 --- a/src/smi_501.h +++ b/src/smi_501.h @@ -634,9 +634,16 @@ typedef struct _MSOCRegRec { * 2:2 CRT Graphics Plane Enable. * 0: Disable CRT Graphics plane. * 1: Enable CRT Graphics plane. + * 8:8 Enable CRT Timing. + * 0: Disable CRT timing. + * 1: Enable CRT timing. * 9:9: CRT Data Select. * 0: CRT will display panel data. * 1: CRT will display CRT data. + * 10:10 CRT Data Blanking. + * 0: CRT will show pixels. + * 1: CRT will be blank. + * 11:11 Vertical Sync. This bit is read only. * 12:12 Horizontal Sync Pulse Phase Select. * 0: Horizontal sync pulse active high. * 1: Horizontal sync pulse active low. @@ -648,9 +655,11 @@ typedef struct _MSOCRegRec { struct { int32_t format : bits( 0, 1); int32_t enable : bits( 2, 2); - int32_t u0 : bits( 3, 8); + int32_t u0 : bits( 3, 7); + int32_t timing : bits( 8, 8); int32_t select : bits( 9, 9); - int32_t u1 : bits(10, 11); + int32_t blank : bits(10, 10); + int32_t sync : bits(11, 11); int32_t hsync : bits(12, 12); int32_t vsync : bits(13, 13); } f; |