summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/smi.h10
-rw-r--r--src/smi_501.h103
-rw-r--r--src/smi_driver.c15
-rw-r--r--src/smi_exa.c70
4 files changed, 194 insertions, 4 deletions
diff --git a/src/smi.h b/src/smi.h
index c31426c..32c13b1 100644
--- a/src/smi.h
+++ b/src/smi.h
@@ -71,6 +71,7 @@ authorization from the XFree86 Project and Silicon Motion.
#define SMI_USE_IMAGE_WRITES 0
#define SMI_USE_VIDEO 1
#define SMI_USE_CAPTURE 1
+#define SMI501_CLI_DEBUG 0
/*
* Leaving attempt implementation of an argb cursor using alpha plane
@@ -262,6 +263,15 @@ typedef struct
structure */
void (*BlockHandler)(int i, pointer blockData, pointer pTimeout,
pointer pReadMask);
+#ifdef SMI501_CLI_DEBUG
+ /* SMI 501/502 Command List Interpreter */
+ Bool batch_active;
+ int64_t *batch_handle; /* Virtual address */
+ int batch_offset; /* Physical smi 501 address */
+ int batch_length; /* Length in 8 byte units */
+ int batch_finish; /* Last finish command offset */
+ int batch_index;
+#endif
} SMIRec, *SMIPtr;
#define SMIPTR(p) ((SMIPtr)((p)->driverPrivate))
diff --git a/src/smi_501.h b/src/smi_501.h
index 2a29ce6..c19721b 100644
--- a/src/smi_501.h
+++ b/src/smi_501.h
@@ -1332,6 +1332,109 @@ typedef union smi_cli_entry {
int64_t value;
} smi_cli_entry_t;
+
+#ifdef SMI501_CLI_DEBUG
+
+/* ensure there are "count" command list "slots" 8 bytes wide free */
+#define BATCH_BEGIN(COUNT) \
+ do { \
+ if (IS_MSOC(pSmi)) { \
+ smi_cli_entry_t *entry; \
+ MSOCCmdAddrRec address; \
+ \
+ pSmi->batch_active = TRUE; \
+ ErrorF("BATCH_BEGIN(%d)\n", COUNT); \
+ /* One for finish */ \
+ if (pSmi->batch_index + COUNT + 1 >= pSmi->batch_length) { \
+ entry = (smi_cli_entry_t *) \
+ &pSmi->batch_handle[pSmi->batch_index]; \
+ entry->f.cmd = smi_cli_goto; \
+ /* start of buffer */ \
+ entry->f.base = pSmi->batch_offset; \
+ /* absolute jump */ \
+ entry->f.data = 0; \
+ ErrorF("wrap: from %d\n", pSmi->batch_index); \
+ address.value = READ_SCR(pSmi, CMD_ADDR); \
+ pSmi->batch_index = 0; \
+ } \
+ } \
+ } while (0)
+
+/* load register */
+#define BATCH_LOAD_REG(PORT, VALUE) \
+ do { \
+ smi_cli_entry_t *entry = (smi_cli_entry_t *) \
+ &pSmi->batch_handle[pSmi->batch_index++]; \
+ \
+ ErrorF("BATCH_LOAD_REG(%x, %x)\n", PORT, VALUE); \
+ entry->f.cmd = smi_cli_load_reg; \
+ entry->f.base = PORT; \
+ entry->f.data = VALUE; \
+ } while (0)
+
+/* Appending to the Command List
+ *
+ * The procedure for chaining command lists is:
+ * 1. Fill the command list buffer after the last FINISH command.
+ * The software should always keep track of the address of the
+ * last FINISH command.
+ * 2. Terminate the command list with a FINISH and remember the
+ * address of this FINISH.
+ * 3. Stop the command list by programming "0" in bit 31 of the
+ * Command List Address register.
+ * 4. Read and remember the current program counter.
+ * 5. Replace the previous FINISH command with a NOP command
+ * (00000000C0000000).
+ * 6. Restart the command list by programming the saved program counter
+ * and "1" in bit 31 of the Command List Address register.
+ */
+#define BATCH_END() \
+ do { \
+ if (pSmi->batch_active) { \
+ MSOCCmdAddrRec address; \
+ smi_cli_entry_t *entry = (smi_cli_entry_t *) \
+ &pSmi->batch_handle[pSmi->batch_index]; \
+ \
+ ErrorF("BATCH_END()\n"); \
+ pSmi->batch_active = FALSE; \
+ /* Add new finish command */ \
+ entry->f.cmd = smi_cli_finish; \
+ /* Don't generate irq when processing the finish command */ \
+ entry->f.base = 0; \
+ address.value = READ_SCR(pSmi, CMD_ADDR); \
+ ErrorF("<<address = %d, finish = %d, index = %d\n", \
+ (address.f.address - pSmi->batch_offset) >> 3, \
+ pSmi->batch_finish, pSmi->batch_index); \
+ address.f.start = 0; \
+ WRITE_SCR(pSmi, CMD_ADDR, address.value); \
+ WaitIdle(); \
+ if (pSmi->batch_finish >= 0) \
+ pSmi->batch_handle[pSmi->batch_finish] = \
+ /* wait for idle engine */ \
+ /* just add a noop as there are 2 WaitIdle()'s */ \
+ /*0x180002601e0007ll*/0x00000000c0000000ll/*0x60060005ll*/; \
+ address.f.address = pSmi->batch_offset + \
+ ((pSmi->batch_finish + 1) << 3); \
+ /* New finish is current index */ \
+ pSmi->batch_finish = pSmi->batch_index; \
+ /* Where to start adding new entries */ \
+ ++pSmi->batch_index; \
+ /* Start executing list again */ \
+ address.f.start = 1; \
+ WRITE_SCR(pSmi, CMD_ADDR, address.value); \
+ do { \
+ address.value = READ_SCR(pSmi, CMD_ADDR); \
+ ErrorF("loop: %x\n", address.value); \
+ } while (!address.f.idle); \
+ WaitIdle(); \
+ ErrorF(">>address = %d, finish = %d, index = %d\n", \
+ (address.f.address - pSmi->batch_offset) >> 3, \
+ pSmi->batch_finish, pSmi->batch_index); \
+ } \
+ } while (0)
+
+#endif
+
/*
* 512 kb reserved for usb buffers
*
diff --git a/src/smi_driver.c b/src/smi_driver.c
index 01198ae..79d8a0c 100644
--- a/src/smi_driver.c
+++ b/src/smi_driver.c
@@ -1522,6 +1522,21 @@ SMI_MapMem(ScrnInfoPtr pScrn)
#else
pSmi->FBReserved = pSmi->FBCursorOffset = pSmi->videoRAMBytes -
(pSmi->Dualhead ? SMI501_CURSOR_SIZE << 1 : SMI501_CURSOR_SIZE);
+
+# ifdef SMI501_CLI_DEBUG
+ if (pSmi->useEXA) {
+ pSmi->batch_active = FALSE;
+ pSmi->batch_length = 4096;
+ pSmi->FBReserved -= pSmi->batch_length << 3;
+ pSmi->batch_offset = pSmi->FBReserved;
+ pSmi->batch_handle = (int64_t *)(pSmi->FBBase + pSmi->batch_offset);
+ pSmi->batch_finish = -1;
+ pSmi->batch_index = 0;
+ xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "Using command list interpreter debug code\n");
+ }
+# endif
+
#endif
}
else {
diff --git a/src/smi_exa.c b/src/smi_exa.c
index aeed606..1b6d42f 100644
--- a/src/smi_exa.c
+++ b/src/smi_exa.c
@@ -27,6 +27,19 @@ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#include "smi.h"
+#if SMI501_CLI_DEBUG
+# include "smi_501.h"
+# undef WRITE_DPR
+# define WRITE_DPR(pSmi, dpr, data) \
+ do { \
+ if (pSmi->batch_active) \
+ BATCH_LOAD_REG((pSmi->DPRBase - pSmi->MapBase) + \
+ dpr, data); \
+ else \
+ MMIO_OUT32(pSmi->DPRBase, dpr, data); \
+ DEBUG("DPR%02X = %08X\n", dpr, data); \
+ } while (0)
+#endif
static void
SMI_EXASync(ScreenPtr pScreen, int marker);
@@ -241,13 +254,16 @@ SMI_PrepareCopy(PixmapPtr pSrcPixmap, PixmapPtr pDstPixmap, int xdir, int ydir,
pSmi->AccelCmd |= SMI_RIGHT_TO_LEFT;
}
- WaitQueue();
-
if (pDstPixmap->drawable.bitsPerPixel == 24) {
src_pitch *= 3;
dst_pitch *= 3;
}
+#if SMI501_CLI_DEBUG
+ BATCH_BEGIN(7);
+#else
+ WaitQueue();
+#endif
/* Destination and Source Window Widths */
WRITE_DPR(pSmi, 0x3C, (dst_pitch << 16) | (src_pitch & 0xFFFF));
/* Destination and Source Row Pitch */
@@ -266,6 +282,9 @@ SMI_PrepareCopy(PixmapPtr pSrcPixmap, PixmapPtr pDstPixmap, int xdir, int ydir,
WRITE_DPR(pSmi, 0x44, dst_offset);
WRITE_DPR(pSmi, 0x0C, pSmi->AccelCmd);
+#if SMI501_CLI_DEBUG
+ BATCH_END();
+#endif
LEAVE(TRUE);
}
@@ -304,10 +323,17 @@ SMI_Copy(PixmapPtr pDstPixmap, int srcX, int srcY, int dstX,
}
}
+#if SMI501_CLI_DEBUG
+ BATCH_BEGIN(3);
+#else
WaitQueue();
+#endif
WRITE_DPR(pSmi, 0x00, (srcX << 16) + (srcY & 0xFFFF));
WRITE_DPR(pSmi, 0x04, (dstX << 16) + (dstY & 0xFFFF));
WRITE_DPR(pSmi, 0x08, (width << 16) + (height & 0xFFFF));
+#if SMI501_CLI_DEBUG
+ BATCH_END();
+#endif
LEAVE();
}
@@ -371,12 +397,16 @@ SMI_PrepareSolid(PixmapPtr pPixmap, int alu, Pixel planemask, Pixel fg)
| SMI_BITBLT
| SMI_QUICK_START;
- WaitQueue();
-
if (pPixmap->drawable.bitsPerPixel == 24) {
dst_pitch *= 3;
}
+#if SMI501_CLI_DEBUG
+ BATCH_BEGIN(10);
+#else
+ WaitQueue();
+#endif
+
/* Destination Window Width */
WRITE_DPR(pSmi, 0x3C, (dst_pitch << 16) | (dst_pitch & 0xFFFF));
/* Destination Row Pitch */
@@ -401,6 +431,9 @@ SMI_PrepareSolid(PixmapPtr pPixmap, int alu, Pixel planemask, Pixel fg)
WRITE_DPR(pSmi, 0x38, 0xFFFFFFFF);
WRITE_DPR(pSmi, 0x0C, pSmi->AccelCmd);
+#if SMI501_CLI_DEBUG
+ BATCH_END();
+#endif
LEAVE(TRUE);
}
@@ -427,9 +460,16 @@ SMI_Solid(PixmapPtr pPixmap, int x1, int y1, int x2, int y2)
}
}
+#if SMI501_CLI_DEBUG
+ BATCH_BEGIN(2);
+#else
WaitQueue();
+#endif
WRITE_DPR(pSmi, 0x04, (x1 << 16) | (y1 & 0xFFFF));
WRITE_DPR(pSmi, 0x08, (w << 16) | (h & 0xFFFF));
+#if SMI501_CLI_DEBUG
+ BATCH_END();
+#endif
LEAVE();
}
@@ -503,7 +543,11 @@ SMI_UploadToScreen(PixmapPtr pDst, int x, int y, int w, int h,
/* set clipping */
SMI_SetClippingRectangle(pScrn, x, y, x+w, y+h);
+#if SMI501_CLI_DEBUG
+ BATCH_BEGIN(9);
+#else
WaitQueue();
+#endif
/* Destination and Source Window Widths */
WRITE_DPR(pSmi, 0x3C, (dst_pixelpitch << 16) | (src_pixelpitch & 0xFFFF));
@@ -528,6 +572,9 @@ SMI_UploadToScreen(PixmapPtr pDst, int x, int y, int w, int h,
WRITE_DPR(pSmi, 0x00, 0);
WRITE_DPR(pSmi, 0x04, (x << 16) | (y & 0xFFFF));
WRITE_DPR(pSmi, 0x08, (w << 16) | (h & 0xFFFF));
+#if SMI501_CLI_DEBUG
+ BATCH_END();
+#endif
while (h--) {
memcpy(pSmi->DataPortBase, src, aligned_pitch);
@@ -585,7 +632,11 @@ SMI_PrepareComposite(int op, PicturePtr pSrcPicture, PicturePtr pMaskPicture, Pi
ENTER();
+#if SMI501_CLI_DEBUG
+ BATCH_BEGIN(7);
+#else
WaitQueue();
+#endif
/* Destination and Source Window Widths */
WRITE_DPR(pSmi, 0x3C, (dst_pitch << 16) | (src_pitch & 0xFFFF));
@@ -611,6 +662,10 @@ SMI_PrepareComposite(int op, PicturePtr pSrcPicture, PicturePtr pMaskPicture, Pi
WRITE_DPR(pSmi, 0x0C, 0xCC /*GXCopy*/ | SMI_ROTATE_BLT |
SMI_ROTATE_CCW | SMI_QUICK_START);
+#if SMI501_CLI_DEBUG
+ BATCH_END();
+#endif
+
pSmi->renderTransform = pSrcPicture->transform;
LEAVE(TRUE);
@@ -640,11 +695,18 @@ SMI_Composite(PixmapPtr pDst, int srcX, int srcY, int maskX, int maskY,
v.vector[2] = xFixed1;
PictureTransformPoint(t, &v);
+#if SMI501_CLI_DEBUG
+ BATCH_BEGIN(3);
+#else
WaitQueue();
+#endif
WRITE_DPR(pSmi, 0x00, (xFixedToInt(v.vector[0]) << 16) + (xFixedToInt(v.vector[1]) & 0xFFFF));
WRITE_DPR(pSmi, 0x04, (dstX << 16) + (dstY & 0xFFFF));
WRITE_DPR(pSmi, 0x08, (height << 16) + (width & 0xFFFF));
+#if SMI501_CLI_DEBUG
+ BATCH_END();
+#endif
LEAVE();
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 04:44:24 +0000