summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2008-11-14Only compile smi_dga.c when xf86DiDGAInit is not available.Paulo Cesar Pereira de Andrade
2008-11-14Correct regressions in CSCVideoPaulo Cesar Pereira de Andrade
2008-11-14MSOC: Hide cursor on mode setup when using software cursor.Paulo Cesar Pereira de Andrade
2008-11-14Be more liberal about mode width validation.Paulo Cesar Pereira de Andrade
2008-11-13Don't restore alpha registers, as they are not being modified.Paulo Cesar Pereira de Andrade
2008-11-13Changed to use panel plane tl and tr to center modes smaller then panel size.Paulo Cesar Pereira de Andrade
2008-11-13Enable gamma correction on the MSOC.Paulo Cesar Pereira de Andrade
2008-11-11Correct a problem in CSC video on the smi 501/502.Paulo Cesar Pereira de Andrade
2008-11-11Disable detection of crt for the smi 501/502.Paulo Cesar Pereira de Andrade
2008-11-11Implement an argb cursor using the alpha layer.Paulo Cesar Pereira de Andrade
2008-11-11Add support for the reading/writing the alpha layer registers.Paulo Cesar Pereira de Andrade
2008-11-11Correct wrong offset value for secondary hardware cursor.Paulo Cesar Pereira de Andrade
2008-11-08Remove unused fifo_* options.Francisco Jerez
2008-11-08Remove the ZoomOnLCD option and update manpage for PCIRetry.Paulo Cesar Pereira de Andrade
2008-11-07Bit twelve on CPR00 bitfield is not bit eleven...Nathael Pajani
2008-11-06Use the CRT Monitor Detect MSOC register.Paulo Cesar Pereira de Andrade
2008-11-04Allow setting modes larger then panel for secondary output.Paulo Cesar Pereira de Andrade
2008-11-04Add CSCVideo option to smi 501/502.Paulo Cesar Pereira de Andrade
2008-10-30Make MSOC work with EXA offscreen manager.Paulo Cesar Pereira de Andrade
2008-10-30 Update memory detection for MSOC.Paulo Cesar Pereira de Andrade
2008-10-30 Disable HW cursor in dualhead mode in smi 501/502Paulo Cesar Pereira de Andrade
2008-10-29 SMI501/502 cursor fixes.Paulo Cesar Pereira de Andrade
2008-10-28Update msoc to use randr cursor routinesPaulo Cesar Pereira de Andrade
2008-10-28Remove shadowfb based rotation support.Francisco Jerez
2008-10-28Lynx hardware cursor code adapted to the CRTC interfaces.Francisco Jerez
2008-10-28Changes in the video overlay clipping code.Francisco Jerez
2008-10-28Simple EXA Composite implementation.Francisco Jerez
2008-10-28Some corrections in the CRTC code.Francisco Jerez
2008-10-24Make Dualhead option functional.Paulo Cesar Pereira de Andrade
2008-10-22Make UseFBDev option functional again.Paulo Cesar Pereira de Andrade
2008-10-21Use existing "Dualhead" option in MSOC.Paulo Cesar Pereira de Andrade
2008-10-21Crt interface corrections.Paulo Cesar Pereira de Andrade
2008-10-20Don't change M1XCLK unless option specified in xorg.conf.Paulo Cesar Pereira de Andrade
2008-10-17Update sm502 pll3 programming.Paulo Cesar Pereira de Andrade
2008-10-16Revert/modify some RandR changes to reenable XAA.Paulo Cesar Pereira de Andrade
2008-10-16Correct incorrect pll3 calculation.Paulo Cesar Pereira de Andrade
2008-10-14Extra MSOC tweaks for the RandR1.2 changes.Paulo Cesar Pereira de Andrade
2008-10-14Remove dependency on xf86cvt.c.Paulo Cesar Pereira de Andrade
2008-10-14Minor corrections for smi501 for the randr1.2 integration.Paulo Cesar Pereira de Andrade
2008-10-14RandR1.2 initial implementation (WIP)Francisco Jerez
2008-10-09Add a PanelSize/60Hz CVT mode at driver initializationPaulo Cesar Pereira de Andrade
2008-10-09Make the input frequency in SMI501_FindPLLClock a variablePaulo Cesar Pereira de Andrade
2008-10-08Rewrite WaitQueue and WaitIdle accell macrosPaulo Cesar Pereira de Andrade
2008-10-03Don't use the 1 multiplier on older chipsets.Paulo Cesar Pereira de Andrade
2008-10-03Simplify regsmi.h by removing most unused SMI501 defines.Paulo Cesar Pereira de Andrade
2008-10-03Rename macro "bitfield" to "bits" and correct a wrong division.Paulo Cesar Pereira de Andrade
2008-10-02Remove the IN_SEQ and OUT_SEQ macros.Paulo Cesar Pereira de Andrade
2008-10-02Rewrite some macros to not have side effects in if/else nesting.Paulo Cesar Pereira de Andrade
2008-10-02Add support for the extra divider in the alternate pixel clock setting.Paulo Cesar Pereira de Andrade
2008-10-01Correct clock programming for the SMI 501/502Paulo Cesar Pereira de Andrade